HUAWEI-POE-MIB
HUAWEI Technology Co.,LtdThe HUAWEI-POE-MIB contains objects to manage POE.
snmptranslate -m HUAWEI-POE-MIB -Tpsnmpwalk -v2c -c <community> -m HUAWEI-POE-MIB <host> 1.3.6.1.4.1.2011.5.25.195Imports
| HUAWEI-MIB | hwDatacomm |
|---|---|
| IF-MIB | InterfaceIndex |
| P-BRIDGE-MIB | EnabledStatus |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IhwPoeMIB | 1.3.6.1.4.1.2011.5.25.195 | ||||||||||||||||||||
identity The HUAWEI-POE-MIB contains objects to manage POE. | |||||||||||||||||||||
| NhwPoeGlobalObjects | 1.3.6.1.4.1.2011.5.25.195.1 | ||||||||||||||||||||
| ShwPoePower | 1.3.6.1.4.1.2011.5.25.195.1.1 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current This object identifies the maximum POE power of the system. | |||||||||||||||||||||
| ShwPoePowerRsvPercent | 1.3.6.1.4.1.2011.5.25.195.1.4 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current This object identifies the reserved percent of total POE power. | |||||||||||||||||||||
| ShwPoePowerUtilizationThreshold | 1.3.6.1.4.1.2011.5.25.195.1.5 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current This object identifies the utilization threshold of total POE power. | |||||||||||||||||||||
| ThwPoeSlotTable | 1.3.6.1.4.1.2011.5.25.195.2 | NA | |||||||||||||||||||
table · not-accessible · current This object indicates the slot configuration table of POE. | |||||||||||||||||||||
| RhwPoeSlotEntry | 1.3.6.1.4.1.2011.5.25.195.2.1 | NA | |||||||||||||||||||
row · not-accessible · current This object indicates the entry of the slot configuration table of POE.
| |||||||||||||||||||||
| ChwPoeSlotId | 1.3.6.1.4.1.2011.5.25.195.2.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current This object identifies the slot ID. | |||||||||||||||||||||
| ChwPoeSlotMaximumPower | 1.3.6.1.4.1.2011.5.25.195.2.1.2 | Integer32 (0..7200000) | RW | ||||||||||||||||||
column · Integer32 (0..7200000) · read-write · current This object identifies the maximum power set by users. The value is expressed in mW.
| |||||||||||||||||||||
| ChwPoeSlotAvailablePower | 1.3.6.1.4.1.2011.5.25.195.2.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current This object idenfies the available Power. The value is expressed in mW. | |||||||||||||||||||||
| ChwPoeSlotReferencePower | 1.3.6.1.4.1.2011.5.25.195.2.1.4 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current This object identifies the total reference power of a slot. The value is expressed in mW. | |||||||||||||||||||||
| ChwPoeSlotConsumingPower | 1.3.6.1.4.1.2011.5.25.195.2.1.5 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current This object identifies the total consuming power of a slot. The value is expressed in mW. | |||||||||||||||||||||
| ChwPoeSlotPeakPower | 1.3.6.1.4.1.2011.5.25.195.2.1.6 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current This object identifies the total peak power of a slot. The value is expressed in mW. | |||||||||||||||||||||
| ChwPoeSlotLegacyDetect | 1.3.6.1.4.1.2011.5.25.195.2.1.7 | EnabledStatus | RW | ||||||||||||||||||
column · EnabledStatus · read-write · current This object indicates the compatibility detection of a non-standard device. (1:enable; 2:disable(default)) | |||||||||||||||||||||
| ChwPoeSlotPowerManagementManner | 1.3.6.1.4.1.2011.5.25.195.2.1.8 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This object identifies the power management manner. (1:manual, 2:auto(default)).
| |||||||||||||||||||||
| ChwPoeSlotIsPoeDevice | 1.3.6.1.4.1.2011.5.25.195.2.1.9 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current This object indicates whether the device supports PoE. | |||||||||||||||||||||
| ChwPoeDimmId | 1.3.6.1.4.1.2011.5.25.195.2.1.10 | Integer32 (0..1) | AN | ||||||||||||||||||
column · Integer32 (0..1) · accessible-for-notify · current This object identifies the DIMM ID. | |||||||||||||||||||||
| ChwPoeSlotPowerRsvPercent | 1.3.6.1.4.1.2011.5.25.195.2.1.11 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current This object identifies the reserved percent of POE power in slot. | |||||||||||||||||||||
| ChwPoeSlotPowerUtilizationThreshold | 1.3.6.1.4.1.2011.5.25.195.2.1.12 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current This object identifies the utilization threshold of total POE power in slot. | |||||||||||||||||||||
| ChwPoeSlotMcuSupport | 1.3.6.1.4.1.2011.5.25.195.2.1.13 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current This object identifies the mcu chip number of a POE slot. | |||||||||||||||||||||
| ThwPoePortTable | 1.3.6.1.4.1.2011.5.25.195.3 | NA | |||||||||||||||||||
table · not-accessible · current This object indicates the table that contains the configuration parameters of a POE interface. One entry corresponds to a POE interface. | |||||||||||||||||||||
| RhwPoePortEntry | 1.3.6.1.4.1.2011.5.25.195.3.1 | NA | |||||||||||||||||||
row · not-accessible · current This object indicates the entry of POE Port Table.
| |||||||||||||||||||||
| ChwPoePortIfIndex | 1.3.6.1.4.1.2011.5.25.195.3.1.1 | InterfaceIndex | NA | ||||||||||||||||||
column · InterfaceIndex · not-accessible · current This object indicates the interface index. | |||||||||||||||||||||
| ChwPoePortName | 1.3.6.1.4.1.2011.5.25.195.3.1.2 | OCTET STRING | RO | GigabitEthernet2/0/1 | |||||||||||||||||
column · OCTET STRING · read-only · current This object indicates the interface name. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChwPoePortEnable | 1.3.6.1.4.1.2011.5.25.195.3.1.3 | EnabledStatus | RW | 1 | |||||||||||||||||
column · EnabledStatus · read-write · current This object indicates the enabling status of an interface. (1:enable(default); 2:disable) Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChwPoePortPriority | 1.3.6.1.4.1.2011.5.25.195.3.1.4 | INTEGER | RW | low(3) | |||||||||||||||||
column · INTEGER · read-write · current This object identifies the priority of an interface. (1:critical, 2:high, 3:low(default))
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChwPoePortMaximumPower | 1.3.6.1.4.1.2011.5.25.195.3.1.5 | Integer32 (0..200000) | RW | 30000 | |||||||||||||||||
column · Integer32 (0..200000) · read-write · current This object identifies the maximum power of an interface.The value is expressed in mW.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChwPoePortPowerOnStatus | 1.3.6.1.4.1.2011.5.25.195.3.1.6 | OCTET STRING | RO | off | |||||||||||||||||
column · OCTET STRING · read-only · current This object indicates the powering status of an interface. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChwPoePortPowerStatus | 1.3.6.1.4.1.2011.5.25.195.3.1.7 | OCTET STRING | RO | Detecting | |||||||||||||||||
column · OCTET STRING · read-only · current This object indicates the status of an interface. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChwPoePortPdClass | 1.3.6.1.4.1.2011.5.25.195.3.1.8 | Integer32 (0..255) | RO | 255 | |||||||||||||||||
column · Integer32 (0..255) · read-only · current This object identifies the class of a PD. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChwPoePortReferencePower | 1.3.6.1.4.1.2011.5.25.195.3.1.9 | Integer32 (0..200000) | RO | 0 | |||||||||||||||||
column · Integer32 (0..200000) · read-only · current This object identifies the guaranteed power of an interface. The value is expressed in mW. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChwPoePortConsumingPower | 1.3.6.1.4.1.2011.5.25.195.3.1.10 | Integer32 (0..200000) | RO | 0 | |||||||||||||||||
column · Integer32 (0..200000) · read-only · current This object identifies the consuming power of an interface. The value is expressed in mW. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChwPoePortPeakPower | 1.3.6.1.4.1.2011.5.25.195.3.1.11 | Integer32 (0..200000) | RO | 0 | |||||||||||||||||
column · Integer32 (0..200000) · read-only · current This object identifies the peak power of an interface. The value is expressed in mW. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChwPoePortAveragePower | 1.3.6.1.4.1.2011.5.25.195.3.1.12 | Integer32 (0..200000) | RO | 0 | |||||||||||||||||
column · Integer32 (0..200000) · read-only · current This object identifies the average power of an interface. The value is expressed in mW. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChwPoePortCurrent | 1.3.6.1.4.1.2011.5.25.195.3.1.13 | OCTET STRING | RO | 0 | |||||||||||||||||
column · OCTET STRING · read-only · current This object indicates the current of an interface. The value is expressed in mA. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChwPoePortVoltage | 1.3.6.1.4.1.2011.5.25.195.3.1.14 | OCTET STRING | RO | 0 | |||||||||||||||||
column · OCTET STRING · read-only · current This object indicates the voltage of an interface. The value is expressed in V. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChwPoePortManualOperation | 1.3.6.1.4.1.2011.5.25.195.3.1.15 | INTEGER | RW | powerOff(1) | |||||||||||||||||
column · INTEGER · read-write · current This object indicates that a PD connected to an interface is powered on or powered off manually.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChwPoePortPoweroffTimeRangeSwitch | 1.3.6.1.4.1.2011.5.25.195.3.1.16 | EnabledStatus | RW | 2 | |||||||||||||||||
column · EnabledStatus · read-write · current This object indicates whether the time range of POE power off is configured on the port. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChwPoePortPoweroffTimeRangeName | 1.3.6.1.4.1.2011.5.25.195.3.1.17 | OCTET STRING | RW | | |||||||||||||||||
column · OCTET STRING · read-write · current This object indicates that time range name of POE power off configured on the port. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChwPoePortMaxPowerThreshold | 1.3.6.1.4.1.2011.5.25.195.3.1.18 | Integer32 (0..200000) | RO | ||||||||||||||||||
column · Integer32 (0..200000) · read-only · current This object identifies the threshold of the available maximum power of an interface. The value is expressed in mW.
| |||||||||||||||||||||
| ChwPoePortMinPowerThreshold | 1.3.6.1.4.1.2011.5.25.195.3.1.19 | Integer32 (0..200000) | RO | ||||||||||||||||||
column · Integer32 (0..200000) · read-only · current This object identifies the threshold of the available minimum power of an interface. The value is expressed in mW.
| |||||||||||||||||||||
| ChwPoePortLegacyDetect | 1.3.6.1.4.1.2011.5.25.195.3.1.20 | EnabledStatus | RW | 2 | |||||||||||||||||
column · EnabledStatus · read-write · current This object indicates the compatibility detection of a non-standard device. (1:enable; 2:disable(default)) Example values from LibreNMS test devices
| |||||||||||||||||||||
| ThwPoePortJudgeTable | 1.3.6.1.4.1.2011.5.25.195.4 | NA | |||||||||||||||||||
table · not-accessible · current This object indicates the table that contains the judgement of whether port supports POE. | |||||||||||||||||||||
| RhwPoePortJudgeEntry | 1.3.6.1.4.1.2011.5.25.195.4.1 | NA | |||||||||||||||||||
| ChwPoePortJudgeIfIndex | 1.3.6.1.4.1.2011.5.25.195.4.1.1 | InterfaceIndex | NA | ||||||||||||||||||
column · InterfaceIndex · not-accessible · current This object indicates the interface index. | |||||||||||||||||||||
| ChwPoePortJudgeIsSupport | 1.3.6.1.4.1.2011.5.25.195.4.1.2 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current This object indicates whether the interface supports POE. | |||||||||||||||||||||
| ThwPoePowerInfoTable | 1.3.6.1.4.1.2011.5.25.195.5 | NA | |||||||||||||||||||
table · not-accessible · current This object indicates the table that contains the power information of POE. | |||||||||||||||||||||
| RhwPoePowerInfoEntry | 1.3.6.1.4.1.2011.5.25.195.5.1 | NA | |||||||||||||||||||
row · not-accessible · current This object indicates the entry of table. | |||||||||||||||||||||
| ChwPoePowerInfoDeviceIndex | 1.3.6.1.4.1.2011.5.25.195.5.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current This object indicates the device index. Index: reserved/chassis/slot. The index is format by 4 bytes(8bits for 1 byte): reserved is 1 byte(0x00), chassis is 12bits and slot is also 12bits. e.g. chassis=1, slot=0, the index is 0x00001000. If device is chassis, the slot is always 0. If device is box, the chassis is always 0. | |||||||||||||||||||||
| ChwPoePowerInfoDeviceName | 1.3.6.1.4.1.2011.5.25.195.5.1.2 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current This object indicates the table that contains the name of device. | |||||||||||||||||||||
| ChwPoePowerInfoDeviceTotalPower | 1.3.6.1.4.1.2011.5.25.195.5.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current This object indicates the table that contains the total power of POE. | |||||||||||||||||||||
| ChwPoePowerInfoDeviceTotalAvailablePower | 1.3.6.1.4.1.2011.5.25.195.5.1.4 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current This object indicates the table that contains the total available power of POE. | |||||||||||||||||||||
| ChwPoePowerInfoDeviceReservedPower | 1.3.6.1.4.1.2011.5.25.195.5.1.5 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current This object indicates the table that contains the reserved power of POE. | |||||||||||||||||||||
| ChwPoePowerInfoDeviceUsedPower | 1.3.6.1.4.1.2011.5.25.195.5.1.6 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current This object indicates the table that contains the used power of POE. | |||||||||||||||||||||
| ChwPoePowerInfoDeviceRemainPower | 1.3.6.1.4.1.2011.5.25.195.5.1.7 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current This object indicates the table that contains the remain power of POE. | |||||||||||||||||||||
| ThwPoeMultiMcuTable | 1.3.6.1.4.1.2011.5.25.195.6 | NA | |||||||||||||||||||
table · not-accessible · current This object indicates the slot configuration table of multi-mcu POE. | |||||||||||||||||||||
| RhwPoeMultiMcuEntry | 1.3.6.1.4.1.2011.5.25.195.6.1 | NA | |||||||||||||||||||
row · not-accessible · current This object indicates the entry of the slot configuration table of multi-mcu POE. | |||||||||||||||||||||
| ChwPoeMultiMcuSlotId | 1.3.6.1.4.1.2011.5.25.195.6.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current This object identifies the slot ID. | |||||||||||||||||||||
| ChwPoeMultiMcuMcuIndex | 1.3.6.1.4.1.2011.5.25.195.6.1.2 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current This object identifies the mcu ID. | |||||||||||||||||||||
| ChwPoeMultiMcuMaximumPower | 1.3.6.1.4.1.2011.5.25.195.6.1.3 | Integer32 (0..1776000) | RW | ||||||||||||||||||
column · Integer32 (0..1776000) · read-write · current This object identifies the maximum power set by users in slot and mcu. The value is expressed in mW.
| |||||||||||||||||||||
| ChwPoeMultiMcuAvailablePower | 1.3.6.1.4.1.2011.5.25.195.6.1.4 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current This object idenfies the available power in slot and mcu. The value is expressed in mW. | |||||||||||||||||||||
| ChwPoeMultiMcuPowerRcvPercent | 1.3.6.1.4.1.2011.5.25.195.6.1.5 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current This object identifies the reserved percent of POE power in slot and mcu. | |||||||||||||||||||||
| ChwPoeMultiPowerUtilizationThreshold | 1.3.6.1.4.1.2011.5.25.195.6.1.6 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current This object identifies the utilization threshold of total POE power in slot and mcu. | |||||||||||||||||||||
| NhwPoeTrapObjects | 1.3.6.1.4.1.2011.5.25.195.39 | ||||||||||||||||||||
| ShwPoePdPriority | 1.3.6.1.4.1.2011.5.25.195.39.1 | INTEGER | AN | ||||||||||||||||||
scalar · INTEGER · accessible-for-notify · current This object identifies the PD priority.(1:critical, 2:high, 3:low(default))
| |||||||||||||||||||||
| ShwPoeSlotNum | 1.3.6.1.4.1.2011.5.25.195.39.2 | Integer32 | AN | ||||||||||||||||||
scalar · Integer32 · accessible-for-notify · current This object identifies the slot ID. | |||||||||||||||||||||
| ShwPoeCurConsumPower | 1.3.6.1.4.1.2011.5.25.195.39.3 | Integer32 | AN | ||||||||||||||||||
scalar · Integer32 · accessible-for-notify · current This object identifies the current consuming power. | |||||||||||||||||||||
| ShwPoeConsumPowerThreshold | 1.3.6.1.4.1.2011.5.25.195.39.4 | Integer32 | AN | ||||||||||||||||||
scalar · Integer32 · accessible-for-notify · current This object identifies the threshold of consuming power. | |||||||||||||||||||||
| ShwPoeDeviceID | 1.3.6.1.4.1.2011.5.25.195.39.5 | Integer32 | AN | ||||||||||||||||||
scalar · Integer32 · accessible-for-notify · current This object identifies the device ID. | |||||||||||||||||||||
| ShwFrameID | 1.3.6.1.4.1.2011.5.25.195.39.6 | Integer32 | AN | ||||||||||||||||||
scalar · Integer32 · accessible-for-notify · current This object identifies the CSS Frame ID. | |||||||||||||||||||||
| ShwPoeChipID | 1.3.6.1.4.1.2011.5.25.195.39.7 | Integer32 | AN | ||||||||||||||||||
scalar · Integer32 · accessible-for-notify · current This object identifies the control chip ID. | |||||||||||||||||||||
| ShwTrapProbableCause | 1.3.6.1.4.1.2011.5.25.195.39.8 | OCTET STRING | AN | ||||||||||||||||||
scalar · OCTET STRING · accessible-for-notify · current The probable cause of poe trap. | |||||||||||||||||||||
| ShwPoeCardID | 1.3.6.1.4.1.2011.5.25.195.39.9 | Integer32 | AN | ||||||||||||||||||
scalar · Integer32 · accessible-for-notify · current This object identifies the poe card ID. | |||||||||||||||||||||
| ShwPoeSlotStr | 1.3.6.1.4.1.2011.5.25.195.39.10 | OCTET STRING | AN | ||||||||||||||||||
scalar · OCTET STRING · accessible-for-notify · current This object identifies the poe card String. | |||||||||||||||||||||
| ShwPoeTrapFaultID | 1.3.6.1.4.1.2011.5.25.195.39.11 | Integer32 | AN | ||||||||||||||||||
scalar · Integer32 · accessible-for-notify · current The probable fault id of poe trap. | |||||||||||||||||||||
| NhwPoeNotification | 1.3.6.1.4.1.2011.5.25.195.40 | ||||||||||||||||||||
| !hwPoeDimmError | 1.3.6.1.4.1.2011.5.25.195.40.1 | ||||||||||||||||||||
| !hwPoePowerOff | 1.3.6.1.4.1.2011.5.25.195.40.2 | ||||||||||||||||||||
notification · current This object indicates a PD connected to an interface is powered off.
| |||||||||||||||||||||
| !hwPoePowerOn | 1.3.6.1.4.1.2011.5.25.195.40.3 | ||||||||||||||||||||
notification · current This object indicates that a PD connected to an interface is powered on.
| |||||||||||||||||||||
| !hwPoeSlotPowerOverload | 1.3.6.1.4.1.2011.5.25.195.40.4 | ||||||||||||||||||||
notification · current This object indicates that the power consumed by a slot exceeds the threshold.
| |||||||||||||||||||||
| !hwPoeSlotPowerOverloadResume | 1.3.6.1.4.1.2011.5.25.195.40.5 | ||||||||||||||||||||
notification · current This object indicates that the power consumed by a slot does not exceed the threshold.
| |||||||||||||||||||||
| !hwPoePdPowerOverload | 1.3.6.1.4.1.2011.5.25.195.40.6 | ||||||||||||||||||||
notification · current This object indicates the power consumed by a PD connected to an interface exceeds the threshold. | |||||||||||||||||||||
| !hwPoePdPowerOverloadResume | 1.3.6.1.4.1.2011.5.25.195.40.7 | ||||||||||||||||||||
notification · current This object indicates that the power consumed by a PD connected to an interface does not exceed the threshold. | |||||||||||||||||||||
| !hwPoePdConnected | 1.3.6.1.4.1.2011.5.25.195.40.8 | ||||||||||||||||||||
notification · current This object indicates that a PD is connected to an interface.
| |||||||||||||||||||||
| !hwPoePdDisconnected | 1.3.6.1.4.1.2011.5.25.195.40.9 | ||||||||||||||||||||
notification · current This object indicates that a PD is disconnected from an interface.
| |||||||||||||||||||||
| !hwPoePdClassInvalid | 1.3.6.1.4.1.2011.5.25.195.40.10 | ||||||||||||||||||||
notification · current This object indicates that a PD of an invalid class is detected.
| |||||||||||||||||||||
| !hwPoePdClassOvercurrent | 1.3.6.1.4.1.2011.5.25.195.40.11 | ||||||||||||||||||||
notification · current This object indicates that overcurrent occurs during the classification of a PD.
| |||||||||||||||||||||
| !hwPoePdPowerOvercurrent | 1.3.6.1.4.1.2011.5.25.195.40.12 | ||||||||||||||||||||
notification · current This object indicates that overcurrent occurs during the powering of a PD.
| |||||||||||||||||||||
| !hwPoePdPowerOvercurrentResume | 1.3.6.1.4.1.2011.5.25.195.40.13 | ||||||||||||||||||||
| !hwPoePowerOnFail | 1.3.6.1.4.1.2011.5.25.195.40.14 | ||||||||||||||||||||
| !hwPoePowerOffCurrentLimits | 1.3.6.1.4.1.2011.5.25.195.40.15 | ||||||||||||||||||||
notification · current This object indicates that a PD is powered off because its current meets or exceeds the limit of current.
| |||||||||||||||||||||
| !hwPoePdPriorityDifferent | 1.3.6.1.4.1.2011.5.25.195.40.16 | ||||||||||||||||||||
notification · current This object indicates that the priority of PD is different from the port. | |||||||||||||||||||||
| !hwPoePowerOverUtilizationThreshold | 1.3.6.1.4.1.2011.5.25.195.40.17 | ||||||||||||||||||||
notification · current This object indicates that the PSE is overdrawing power. | |||||||||||||||||||||
| !hwPoePowerOverUtilizationThresholdResume | 1.3.6.1.4.1.2011.5.25.195.40.18 | ||||||||||||||||||||
notification · current This object indicates that the PSE is not overdrawing power. | |||||||||||||||||||||
| !hwPoeBoardInsertedWrongFrame | 1.3.6.1.4.1.2011.5.25.195.40.19 | ||||||||||||||||||||
notification · current This object indicates that the poe board is inserted in the frame does not support poe.
| |||||||||||||||||||||
| !hwPoePowerAbsent | 1.3.6.1.4.1.2011.5.25.195.40.20 | ||||||||||||||||||||
notification · current This object indicates that the poe power is absent.
| |||||||||||||||||||||
| !hwPoePowerAbsentResume | 1.3.6.1.4.1.2011.5.25.195.40.21 | ||||||||||||||||||||
notification · current This object indicates that the poe power is present.
| |||||||||||||||||||||
| !hwPoeRpsPowerOutputAlarm | 1.3.6.1.4.1.2011.5.25.195.40.22 | ||||||||||||||||||||
notification · current This object indicates that the RPS power can not provide POE power for this device.
| |||||||||||||||||||||
| !hwPoeRpsPowerOutputAlarmResume | 1.3.6.1.4.1.2011.5.25.195.40.23 | ||||||||||||||||||||
notification · current This object indicates that the RPS power can provide POE power for this device.
| |||||||||||||||||||||
| !hwPoeControlChipFail | 1.3.6.1.4.1.2011.5.25.195.40.24 | ||||||||||||||||||||
notification · current This object indicates that the poe control chip is failed.
| |||||||||||||||||||||
| !hwPoeControlChipFailResume | 1.3.6.1.4.1.2011.5.25.195.40.25 | ||||||||||||||||||||
notification · current This object indicates that the poe control chip has resumed.
| |||||||||||||||||||||
| !hwPoePSEPowerCut | 1.3.6.1.4.1.2011.5.25.195.40.26 | ||||||||||||||||||||
notification · current This object indicates that the poe pse power is not enough. | |||||||||||||||||||||
| !hwPoePSEPowerCutResume | 1.3.6.1.4.1.2011.5.25.195.40.27 | ||||||||||||||||||||
notification · current This object indicates that the poe pse power cut has resumed. | |||||||||||||||||||||
| !hwPoeSlotPowerCut | 1.3.6.1.4.1.2011.5.25.195.40.28 | ||||||||||||||||||||
notification · current This object indicates that the poe slot power is not enough.
| |||||||||||||||||||||
| !hwPoeSlotPowerCutResume | 1.3.6.1.4.1.2011.5.25.195.40.29 | ||||||||||||||||||||
notification · current This object indicates that the poe slot power cut has resumed.
| |||||||||||||||||||||
| !hwPoeNotAvailable | 1.3.6.1.4.1.2011.5.25.195.40.30 | ||||||||||||||||||||
notification · current PoE function is not available.
| |||||||||||||||||||||
| !hwPoeNotAvailableResume | 1.3.6.1.4.1.2011.5.25.195.40.31 | ||||||||||||||||||||
| !hwPoeCardAbsent | 1.3.6.1.4.1.2011.5.25.195.40.32 | ||||||||||||||||||||
notification · current This object indicates that the poe card is absent.
| |||||||||||||||||||||
| !hwPoePortFail | 1.3.6.1.4.1.2011.5.25.195.40.33 | ||||||||||||||||||||
| !hwPoePortFailResume | 1.3.6.1.4.1.2011.5.25.195.40.34 | ||||||||||||||||||||
| !hwPdPowerCut | 1.3.6.1.4.1.2011.5.25.195.40.35 | ||||||||||||||||||||
| !hwPdPowerCutResume | 1.3.6.1.4.1.2011.5.25.195.40.36 | ||||||||||||||||||||
| !hwPoeChipFail | 1.3.6.1.4.1.2011.5.25.195.40.37 | ||||||||||||||||||||
notification · current This object indicates that the poe chip is failed.
| |||||||||||||||||||||
| !hwPoeChipFailResume | 1.3.6.1.4.1.2011.5.25.195.40.38 | ||||||||||||||||||||
notification · current This object indicates that the poe chip has resumed.
| |||||||||||||||||||||
| !hwPdVltLow | 1.3.6.1.4.1.2011.5.25.195.40.39 | ||||||||||||||||||||
| !hwPdVltLowResume | 1.3.6.1.4.1.2011.5.25.195.40.40 | ||||||||||||||||||||
| !hwPdVltHigh | 1.3.6.1.4.1.2011.5.25.195.40.41 | ||||||||||||||||||||
| !hwPdVltHighResume | 1.3.6.1.4.1.2011.5.25.195.40.42 | ||||||||||||||||||||
| !hwPseVltLow | 1.3.6.1.4.1.2011.5.25.195.40.43 | ||||||||||||||||||||
| !hwPseVltLowResume | 1.3.6.1.4.1.2011.5.25.195.40.44 | ||||||||||||||||||||
| !hwPoePdOvercurrentPoweroff | 1.3.6.1.4.1.2011.5.25.195.40.45 | ||||||||||||||||||||
notification · current This object indicates that the PD is power off due to overcurrent.
| |||||||||||||||||||||
| !hwPoePdOverloadPoweroff | 1.3.6.1.4.1.2011.5.25.195.40.46 | ||||||||||||||||||||
notification · current This object indicates that the PD is power off due to overload.
| |||||||||||||||||||||
| !hwPoeSubCardAbsent | 1.3.6.1.4.1.2011.5.25.195.40.47 | ||||||||||||||||||||
notification · current This object indicates that the poe subcard is absent.
| |||||||||||||||||||||
| !hwPoeSubCardAbsentResume | 1.3.6.1.4.1.2011.5.25.195.40.48 | ||||||||||||||||||||
notification · current This object indicates that the poe subcard is re-installed.
| |||||||||||||||||||||
| !hwPoeCommunicateFail | 1.3.6.1.4.1.2011.5.25.195.40.49 | ||||||||||||||||||||
notification · current This object indicates that the poe communication fails.
| |||||||||||||||||||||
| !hwPoeCommunicateFailResume | 1.3.6.1.4.1.2011.5.25.195.40.50 | ||||||||||||||||||||
notification · current This object indicates that the poe communication has resumed.
| |||||||||||||||||||||
| NhwPoeConformance | 1.3.6.1.4.1.2011.5.25.195.100 | ||||||||||||||||||||
| NhwPoeCompliances | 1.3.6.1.4.1.2011.5.25.195.100.1 | ||||||||||||||||||||
| MhwPoeCompliance | 1.3.6.1.4.1.2011.5.25.195.100.1.1 | ||||||||||||||||||||
compliance · current The compliance statement for systems supporting this module. | |||||||||||||||||||||
| NhwPoeGroups | 1.3.6.1.4.1.2011.5.25.195.100.2 | ||||||||||||||||||||
| GhwPoeSlotGroup | 1.3.6.1.4.1.2011.5.25.195.100.2.1 | ||||||||||||||||||||
group · current This object indicates the POE's slot table group. | |||||||||||||||||||||
| GhwPoePortGroup | 1.3.6.1.4.1.2011.5.25.195.100.2.2 | ||||||||||||||||||||
group · current This object indicates the POE's port table group.
| |||||||||||||||||||||
| GhwPoeGlobalGroup | 1.3.6.1.4.1.2011.5.25.195.100.2.3 | ||||||||||||||||||||
group · current This object indicates the POE's global table group. | |||||||||||||||||||||
| GhwPoeNotificationGroup | 1.3.6.1.4.1.2011.5.25.195.100.2.4 | ||||||||||||||||||||
group · current This object indicates the POE's notification table group.
| |||||||||||||||||||||
| GhwPoeTrapObjectsGroup | 1.3.6.1.4.1.2011.5.25.195.100.2.5 | ||||||||||||||||||||
group · current Description. | |||||||||||||||||||||
| GhwPoePowerInfoGroup | 1.3.6.1.4.1.2011.5.25.195.100.2.6 | ||||||||||||||||||||
group · current This object indicates the POE's power information table group. | |||||||||||||||||||||
| GhwPoeMultiMcuGroup | 1.3.6.1.4.1.2011.5.25.195.100.2.7 | ||||||||||||||||||||
group · current This object indicates the POE's multi-mcu table group. | |||||||||||||||||||||
Traps / Notifications
- hwPdPowerCut
1.3.6.1.4.1.2011.5.25.195.40.35 - hwPdPowerCutResume
1.3.6.1.4.1.2011.5.25.195.40.36 - hwPdVltHigh
1.3.6.1.4.1.2011.5.25.195.40.41 - hwPdVltHighResume
1.3.6.1.4.1.2011.5.25.195.40.42 - hwPdVltLow
1.3.6.1.4.1.2011.5.25.195.40.39 - hwPdVltLowResume
1.3.6.1.4.1.2011.5.25.195.40.40 - hwPoeBoardInsertedWrongFrame
1.3.6.1.4.1.2011.5.25.195.40.19 - hwPoeCardAbsent
1.3.6.1.4.1.2011.5.25.195.40.32 - hwPoeChipFail
1.3.6.1.4.1.2011.5.25.195.40.37 - hwPoeChipFailResume
1.3.6.1.4.1.2011.5.25.195.40.38 - hwPoeCommunicateFail
1.3.6.1.4.1.2011.5.25.195.40.49 - hwPoeCommunicateFailResume
1.3.6.1.4.1.2011.5.25.195.40.50 - hwPoeControlChipFail
1.3.6.1.4.1.2011.5.25.195.40.24 - hwPoeControlChipFailResume
1.3.6.1.4.1.2011.5.25.195.40.25 - hwPoeDimmError
1.3.6.1.4.1.2011.5.25.195.40.1 - hwPoeNotAvailable
1.3.6.1.4.1.2011.5.25.195.40.30 - hwPoeNotAvailableResume
1.3.6.1.4.1.2011.5.25.195.40.31 - hwPoePSEPowerCut
1.3.6.1.4.1.2011.5.25.195.40.26 - hwPoePSEPowerCutResume
1.3.6.1.4.1.2011.5.25.195.40.27 - hwPoePdClassInvalid
1.3.6.1.4.1.2011.5.25.195.40.10 - hwPoePdClassOvercurrent
1.3.6.1.4.1.2011.5.25.195.40.11 - hwPoePdConnected
1.3.6.1.4.1.2011.5.25.195.40.8 - hwPoePdDisconnected
1.3.6.1.4.1.2011.5.25.195.40.9 - hwPoePdOvercurrentPoweroff
1.3.6.1.4.1.2011.5.25.195.40.45 - hwPoePdOverloadPoweroff
1.3.6.1.4.1.2011.5.25.195.40.46 - hwPoePdPowerOvercurrent
1.3.6.1.4.1.2011.5.25.195.40.12 - hwPoePdPowerOvercurrentResume
1.3.6.1.4.1.2011.5.25.195.40.13 - hwPoePdPowerOverload
1.3.6.1.4.1.2011.5.25.195.40.6 - hwPoePdPowerOverloadResume
1.3.6.1.4.1.2011.5.25.195.40.7 - hwPoePdPriorityDifferent
1.3.6.1.4.1.2011.5.25.195.40.16 - hwPoePortFail
1.3.6.1.4.1.2011.5.25.195.40.33 - hwPoePortFailResume
1.3.6.1.4.1.2011.5.25.195.40.34 - hwPoePowerAbsent
1.3.6.1.4.1.2011.5.25.195.40.20 - hwPoePowerAbsentResume
1.3.6.1.4.1.2011.5.25.195.40.21 - hwPoePowerOff
1.3.6.1.4.1.2011.5.25.195.40.2 - hwPoePowerOffCurrentLimits
1.3.6.1.4.1.2011.5.25.195.40.15 - hwPoePowerOn
1.3.6.1.4.1.2011.5.25.195.40.3 - hwPoePowerOnFail
1.3.6.1.4.1.2011.5.25.195.40.14 - hwPoePowerOverUtilizationThreshold
1.3.6.1.4.1.2011.5.25.195.40.17 - hwPoePowerOverUtilizationThresholdResume
1.3.6.1.4.1.2011.5.25.195.40.18 - hwPoeRpsPowerOutputAlarm
1.3.6.1.4.1.2011.5.25.195.40.22 - hwPoeRpsPowerOutputAlarmResume
1.3.6.1.4.1.2011.5.25.195.40.23 - hwPoeSlotPowerCut
1.3.6.1.4.1.2011.5.25.195.40.28 - hwPoeSlotPowerCutResume
1.3.6.1.4.1.2011.5.25.195.40.29 - hwPoeSlotPowerOverload
1.3.6.1.4.1.2011.5.25.195.40.4 - hwPoeSlotPowerOverloadResume
1.3.6.1.4.1.2011.5.25.195.40.5 - hwPoeSubCardAbsent
1.3.6.1.4.1.2011.5.25.195.40.47 - hwPoeSubCardAbsentResume
1.3.6.1.4.1.2011.5.25.195.40.48 - hwPseVltLow
1.3.6.1.4.1.2011.5.25.195.40.43 - hwPseVltLowResume
1.3.6.1.4.1.2011.5.25.195.40.44