HUAWEI-NTP-MIB
HUAWEI Technology Co.,LtdThis MIB module defines mib objects that provide NTP service management. The Network Time Protocol (NTP) is used in networks of all types and sizes for time synchronization of servers, workstations and other networked equipment.
snmptranslate -m HUAWEI-NTP-MIB -Tpsnmpwalk -v2c -c <community> -m HUAWEI-NTP-MIB <host> 1.3.6.1.4.1.2011.6.4Imports
| HUAWEI-MIB | huaweiUtility |
|---|---|
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| IPV6-TC | Ipv6Address |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IhwNtp | 1.3.6.1.4.1.2011.6.4 | |||
identity This MIB module defines mib objects that provide NTP service management. The Network Time Protocol (NTP) is used in networks of all types and sizes for time synchronization of servers, workstations and other networked equipment. | ||||
| Nntp | 1.3.6.1.4.1.2011.6.4.1 | |||
| SntpSynInterval | 1.3.6.1.4.1.2011.6.4.1.4 | Integer32 (0 | 180..600) | RW | |
scalar · Integer32 (0 | 180..600) · read-write · current Sets the synchronization interval. Unit: Second. 0 indicates not configured.
| ||||
| ShwNtpKODStatus | 1.3.6.1.4.1.2011.6.4.1.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current Used for enabling or disabling the NTP service KOD feature. Options: 1. enable(1) -indicates the NTP service KOD feature is enabled 2. disable(2) -indicates the NTP service KOD feature is disabled
| ||||
| NhwNtpObject | 1.3.6.1.4.1.2011.6.4.2 | |||
| ShwNtpDynamicSession | 1.3.6.1.4.1.2011.6.4.2.2 | Integer32 (0..100) | RW | |
scalar · Integer32 (0..100) · read-write · current Indicates the maximum number of dynamic NTP sessions allowed on the host. Range: 0-100 Default: 100 | ||||
| ThwNtpRefclockMasterTable | 1.3.6.1.4.1.2011.6.4.2.3 | NA | ||
table · not-accessible · current It is used for setting an NTP master clock. By using this table, you can set an NTP master clock on the host, which functions as the clock source for synchronizing the devices in a system. After an NTP master clock is set successfully, all devices required to follow the same clock in the system must synchronize to the master clock. | ||||
| RhwNtpRefclockMasterEntry | 1.3.6.1.4.1.2011.6.4.2.3.1 | NA | ||
row · not-accessible · current It is used for setting an NTP master clock. By using this table, you can set an NTP master clock on the host, which functions as the clock source for synchronizing the devices in a system. After an NTP master clock is set successfully, all devices required to follow the same clock in the system must synchronize to the master clock. The index of this entry is hwNtpRefclockMasterIpaddr. | ||||
| ChwNtpRefclockMasterIpaddr | 1.3.6.1.4.1.2011.6.4.2.3.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current Indicates the IP address of the clock source. The format of the value is 127.127.1.u, where u ranges from 0 to 3. The default value of this leaf is 127.127.1.0. | ||||
| ChwNtpRefclockMasterStratum | 1.3.6.1.4.1.2011.6.4.2.3.1.2 | Integer32 (1..15) | RW | |
column · Integer32 (1..15) · read-write · current Indicates the stratum where the local clock is specified to locate. The stratum represents the precision of a clock. The clock at stratum 1 has the highest precision. The precision descends from stratum 1 to stratum 15. The default value of this leaf is 8. | ||||
| ChwNtpRefclockMasterRowStatus | 1.3.6.1.4.1.2011.6.4.2.3.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current Indicates the row status. It is used for the create, delete and query operations. In the modify operation, this leaf is not set or issued. Options: 1. createAndGo(4) -specified in the create operation 2. destroy(6) -specified in the delete operation 3. active(1) -always returned in the query operation | ||||
| NhwNtpServiceSourceInterfaceObject | 1.3.6.1.4.1.2011.6.4.2.4 | |||
| ShwNtpServiceSourceInterfaceIfType | 1.3.6.1.4.1.2011.6.4.2.4.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Indicates the interface type. Options: 1. tunnel(1) -indicates the tunnel interface 2. null(2) -indicates the NULL interface 3. meth(3) -indicates the MEth interface 4. vlanif(4) -indicates the VLAN interface 5. loopback(5) -indicates the loopback interface 6. notConfigured(6) -indicates that no source interface is configured When this leaf is set to notConfigured(6), it indicates that no source interface is configured.
| ||||
| ShwNtpServiceSourceInterfaceIfNumber | 1.3.6.1.4.1.2011.6.4.2.4.2 | Integer32 (0..4093) | RW | |
scalar · Integer32 (0..4093) · read-write · current Indicates the interface ID. Range: 0-4093 Range for the tunnel interface: 1-64 Range for the NULL interface: 0 Range for the MEth interface: 0 Range for the VLAN interface: 1-4093 Range for the loopback interface: 0-31 The interface ID and interface type (hwNtpServiceSourceInterfaceIfType) together identify an interface. | ||||
| NhwNtpAuth | 1.3.6.1.4.1.2011.6.4.2.5 | |||
| ShwNtpAuthenSwitch | 1.3.6.1.4.1.2011.6.4.2.5.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Used for enabling or disabling the NTP service authentication function. Options: 1. enable(1) -indicates the NTP service authentication function is enabled 2. disable(2) -indicates the NTP service authentication function is disabled After the NTP service authentication function is enabled, this function is available; otherwise, this function is not available.
| ||||
| ThwNtpAuthenAccessTable | 1.3.6.1.4.1.2011.6.4.2.5.2 | NA | ||
table · not-accessible · current To protect the NTP service of the local device, use this table to set the authority for accessing the NTP service of the local device. After the authority is set successfully, the local device determines whether to process the received NTP synchronization packet and whether to allow the local device to synchronize to the device sending the packet, according to the configured authority and the packet content. | ||||
| RhwNtpAuthenAccessEntry | 1.3.6.1.4.1.2011.6.4.2.5.2.1 | NA | ||
row · not-accessible · current To protect the NTP service of the local device, use this table to set the authority for accessing the NTP service of the local device. After the authority is set successfully, the local device determines whether to process the received NTP synchronization packet and whether to allow the local device to synchronize to the device sending the packet, according to the configured authority and the packet content. The index of this entry is hwNtpAuthenAccessType. | ||||
| ChwNtpAuthenAccessType | 1.3.6.1.4.1.2011.6.4.2.5.2.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current Indicates the access authority type. This leaf is the index of the table.
Five options are supported.
Options:
1. peer(1) -The time request and control query to the local NTP service are allowed
and the local clock can be synchronized to the remote server.
2. query(2) -Only the control query to the local NTP service is allowed.
3. server(3) -The time request and control query to the local NTP service are allowed
but the local clock is not synchronized to the remote server.
4. synchronization(4) -Only the time request to the local NTP service is allowed.
5. limited(5) -Controls the incoming packet rate and kiss code sent when kod is enabled.
| ||||
| ChwNtpAuthenAccessAcl | 1.3.6.1.4.1.2011.6.4.2.5.2.1.2 | Integer32 (0 | 2000..2999) | RW | |
column · Integer32 (0 | 2000..2999) · read-write · current Indicates the IPv4 ACL number. Range: 2000-2999 The default value is 0, indicating no configuration. The IP address ACL is used by the local device to match the source IP address of a received packet, and then the device can determine whether to process or discard the packet. | ||||
| ChwNtpAuthenAccessRowStatus | 1.3.6.1.4.1.2011.6.4.2.5.2.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current Indicates the row status. It is used for create, delete and query operations. In the modify operation, this leaf is not set or issued. Options: 1. createAndGo(4) -specified in the create operation 2. destroy(6) -specified in the delete operation 3. active(1) -always returned in the query operation | ||||
| ChwNtpAuthenAccessAcl6 | 1.3.6.1.4.1.2011.6.4.2.5.2.1.7 | Integer32 (0 | 2000..2999) | RW | |
column · Integer32 (0 | 2000..2999) · read-write · current Indicates the IPv6 ACL number. Range: 2000-2999 The default value is 0, indicating no configuration. The IPv6 address ACL is used by the local device to match the source IPv6 address of a received packet and then the device can determine whether to process or discard the packet. | ||||
| ThwNtpAuthenKeyTable | 1.3.6.1.4.1.2011.6.4.2.5.3 | NA | ||
table · not-accessible · current It is used for setting the NTP service authentication key. During the creation of the NTP service authentication key, you can also set and issue hwNtpAuthReliableSwitch, declaring the created key as reliable. | ||||
| RhwNtpAuthenKeyEntry | 1.3.6.1.4.1.2011.6.4.2.5.3.1 | NA | ||
row · not-accessible · current It is used for setting the NTP service authentication key. During the creation of the NTP service authentication key, you can also set and issue hwNtpAuthReliableSwitch, declaring the created key as reliable. The index of this entry is hwNtpAuthKeyidNumber.
| ||||
| ChwNtpAuthKeyidNumber | 1.3.6.1.4.1.2011.6.4.2.5.3.1.1 | Unsigned32 (1..4294967295) | NA | |
column · Unsigned32 (1..4294967295) · not-accessible · current Indicates the key number. Range: 1-4294967295 | ||||
| ChwNtpAuthKeyidMD5 | 1.3.6.1.4.1.2011.6.4.2.5.3.1.2 | OCTET STRING (SIZE (0..392)) | RW | |
column · OCTET STRING (SIZE (0..392)) · read-write · current Indicates the MD5 key. The MD5 key must not contain the space character and '?' character. Reading this object always results in an OCTET STRING of length zero. Authentication may not be bypassed by reading the MIB object. | ||||
| ChwNtpAuthReliableSwitch | 1.3.6.1.4.1.2011.6.4.2.5.3.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Used for specifying the authentication key as reliable and to undo the current setting. Options: 1. enable(1) -indicating that the key is reliable. 2. disable(2) -indicating that the key is not reliable. Default: disable(2).
| ||||
| ChwNtpAuthKeyidRowStatus | 1.3.6.1.4.1.2011.6.4.2.5.3.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current Indicates the row status. It is used for the create, delete and query operations. In the modify operation, this leaf is not set or issued. Options: 1. createAndGo(4) -specified in the create operation 2. destroy(6) -specified in the delete operation 3. active(1) -always returned in the query operation | ||||
| ChwNtpAuthKeyidType | 1.3.6.1.4.1.2011.6.4.2.5.3.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates hashing algorithm MD5 or SHA-256 which is used for NTP authentication. Options: 1. md5(1) -indicates the NTP MD5 algorithm is used as hashing algorithm 2. sha256(2) -indicates the NTP SHA-256 algorithm is used as hashing algorithm 3. aes128cmac(3) -indicates the NTP AES-128-CMAC algorithm is used as hashing algorithm 4. aes256cmac(4) -indicates the NTP AES-256-CMAC algorithm is used as hashing algorithm
| ||||
| ChwNtpAuthKeyidPassword | 1.3.6.1.4.1.2011.6.4.2.5.3.1.8 | OCTET STRING (SIZE (0..392)) | RW | |
column · OCTET STRING (SIZE (0..392)) · read-write · current Indicates MD5 or SHA256 or AESCMAC password key. The key must not contain the space character and '?' character. Reading this object always results in an OCTET STRING of length zero. Authentication may not be bypassed by reading the MIB object. hwNtpAuthKeyidType and hwNtpAuthKeyidPassword should be configured together for set operation. | ||||
| ThwNtpUnicastServerTable | 1.3.6.1.4.1.2011.6.4.2.6 | NA | ||
table · not-accessible · current It is used for setting the NTP unicast server mode. This table provides a leaf for setting an IP address, which specifies a remote server to serve as the time server of the local device. | ||||
| RhwNtpUnicastServerEntry | 1.3.6.1.4.1.2011.6.4.2.6.1 | NA | ||
row · not-accessible · current It is used for setting the NTP unicast server mode. This table provides a leaf for setting an IP address, which specifies a remote server to serve as the time server of the local device. The index of this entry is hwNtpUnicastServerIp.
| ||||
| ChwNtpUnicastServerIp | 1.3.6.1.4.1.2011.6.4.2.6.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current Indicates the IP address of the remote server. The IP address is the address of the host and cannot be a broadcast IP address, multicast IP address, IP address of the clock source or IP address of an interface on the local device. | ||||
| ChwNtpUnicastServerVersion | 1.3.6.1.4.1.2011.6.4.2.6.1.2 | Integer32 (1..4) | RW | |
column · Integer32 (1..4) · read-write · current Indicates the NTP protocol version. Range: 1-4 Default: 3 The protocol of a later version is compatible with an earlier version, but an earlier version is not compatible with a later version. | ||||
| ChwNtpUnicastServerAuthKeyid | 1.3.6.1.4.1.2011.6.4.2.6.1.3 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Indicates the key ID used for sending packets to the remote server. Range: 0-4294967295 for versions 1,2 and 3 Range: 0-65535 for version 4 0 indicates not configured. The key ID identifies a key. When the packets sent by the remote server need to be authenticated, you need to set and issue this leaf. | ||||
| ChwNtpUnicastServerSourceIfType | 1.3.6.1.4.1.2011.6.4.2.6.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates the interface type. Options: 1. tunnel(1) -indicates the tunnel interface 2. null(2) -indicates the NULL interface 3. meth(3) -indicates the MEth interface 4. vlanif(4) -indicates the VLAN interface 5. loopback(5) -indicates the loopback interface 6. notConfigured(6) -indicates that no source interface is configured When this leaf is set to notConfigured(6), it indicates that no source interface is configured in the case of the create operation and that the source interface is deleted in the case of the modify operation.
| ||||
| ChwNtpUnicastServerSourceIfNumber | 1.3.6.1.4.1.2011.6.4.2.6.1.5 | Integer32 (0..4093) | RW | |
column · Integer32 (0..4093) · read-write · current Indicates the interface ID. Range: 0-4093 Range for the tunnel interface: 1-64 Range for the NULL interface: 0 Range for the MEth interface: 0 Range for the VLAN interface: 1-4093 Range for the loopback interface: 0-31 The interface ID and interface type (hwNtpUnicastServerSourceIfType) together identify the source interface for sending NTP unicast packets. | ||||
| ChwNtpUnicastServerPreference | 1.3.6.1.4.1.2011.6.4.2.6.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates the server is the preferred server. Options: 1. enable(1) -indicates that the server is preferred 2. disable(2) -indicates that the server is not preferred When multiple servers exist at the same stratum, the specified server is preferred for synchronization.
| ||||
| ChwNtpUnicastServerRowStatus | 1.3.6.1.4.1.2011.6.4.2.6.1.9 | RowStatus | RC | |
column · RowStatus · read-create · current Indicates the row status. It is used for the create, delete and query operations. In the modify operation, this leaf is not set or issued. Options: 1. createAndGo(4) -specified in the create operation 2. destroy(6) -specified in the delete operation 3. active(1) -always returned in the query operation | ||||
| ChwNtpUnicastServerSourceIfName | 1.3.6.1.4.1.2011.6.4.2.6.1.10 | OCTET STRING (SIZE (0..63)) | RO | |
column · OCTET STRING (SIZE (0..63)) · read-only · current Specifies the interface name used for sending out the packets if hwNtpUnicastServerSourceIfType and hwNtpUnicastServerSourceIfNumber are configured. If not configured, it will be wildcard. | ||||
| ThwNtpUnicastPeerTable | 1.3.6.1.4.1.2011.6.4.2.7 | NA | ||
table · not-accessible · current It is used for setting the NTP unicast peer mode. This table provides a leaf for setting an IP address, which specifies a remote server to serve as the peer of the local device. | ||||
| RhwNtpUnicastPeerEntry | 1.3.6.1.4.1.2011.6.4.2.7.1 | NA | ||
row · not-accessible · current It is used for setting the NTP unicast peer mode. This table provides a leaf for setting an IP address, which specifies a remote server to serve as the peer of the local device. The index of this entry is hwNtpUnicastPeerIP.
| ||||
| ChwNtpUnicastPeerIP | 1.3.6.1.4.1.2011.6.4.2.7.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current Indicates the IP address of the remote peer. The IP address is the address of the host and cannot be a broadcast IP address, multicast IP address, IP address of the clock source or IP address of an interface on the local device. | ||||
| ChwNtpUnicastPeerVersion | 1.3.6.1.4.1.2011.6.4.2.7.1.2 | Integer32 (1..4) | RW | |
column · Integer32 (1..4) · read-write · current Indicates the NTP protocol version. Range: 1-4 Default: 3 The protocol of a later version is compatible with an earlier version, but an earlier version is not compatible with a later version. | ||||
| ChwNtpUnicastPeerAuthKeyid | 1.3.6.1.4.1.2011.6.4.2.7.1.3 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Indicates the key ID for sending packets to the unicast peer. Range: 0-4294967295 for versions 1,2 and 3 Range: 0-65535 for version 4 0 indicates not configured. The key ID identifies a key. When the packets sent by the peer need to be authenticated, you need to set and issue this leaf. | ||||
| ChwNtpUnicastPeerSourceIfType | 1.3.6.1.4.1.2011.6.4.2.7.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates the interface type. Options: 1. tunnel(1) -indicates the tunnel interface 2. null(2) -indicates the NULL interface 3. meth(3) -indicates the MEth interface 4. vlanif(4) -indicates the VLAN interface 5. loopback(5) -indicates the loopback interface 6. notConfigured(6) -indicates that no source interface is configured When this leaf is set to notConfigured(6), it indicates that no source interface is configured in the case of the create operation and that the source interface is deleted in the case of the modify operation.
| ||||
| ChwNtpUnicastPeerSourceIfNumber | 1.3.6.1.4.1.2011.6.4.2.7.1.5 | Integer32 (0..4093) | RW | |
column · Integer32 (0..4093) · read-write · current Indicates the interface ID. Range: 0-4093 Range for the tunnel interface: 1-64 Range for the NULL interface: 0 Range for the MEth interface: 0 Range for the VLAN interface: 1-4093 Range for the loopback interface: 0-31 The interface ID and interface type (hwNtpUnicastPeerSourceIfType) together identify an interface. | ||||
| ChwNtpUnicastPeerPreference | 1.3.6.1.4.1.2011.6.4.2.7.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates the peer is the preferred peer. Options: 1. enable(1) -indicates that the peer is preferred. 2. disable(2) -indicates that the peer is not preferred. When multiple peers exist at the same stratum, the specified peer is preferred for synchronization.
| ||||
| ChwNtpUnicastPeerRowStatus | 1.3.6.1.4.1.2011.6.4.2.7.1.9 | RowStatus | RC | |
column · RowStatus · read-create · current Indicates the row status. It is used for the create, delete and query operations. In the modify operation, this leaf is not set or issued. Options: 1. createAndGo(4) -specified in the create operation 2. destroy(6) -specified in the delete operation 3. active(1) -always returned in the query operation | ||||
| ChwNtpUnicastPeerSourceIfName | 1.3.6.1.4.1.2011.6.4.2.7.1.10 | OCTET STRING (SIZE (0..63)) | RO | |
column · OCTET STRING (SIZE (0..63)) · read-only · current Specifies the interface name used for sending out the packets if hwNtpUnicastPeerSourceIfType and hwNtpUnicastPeerSourceIfNumber are configured. If not configured, it will be wildcard. | ||||
| ThwNtpMulticastClientTable | 1.3.6.1.4.1.2011.6.4.2.8 | NA | ||
table · not-accessible · current It is used for setting the local device to function as a multicast client. When functioning as a multicast client, the local device listens for the NTP multicast packets sent by the server and synchronizes the local clock with the clock source. | ||||
| RhwNtpMulticastClientEntry | 1.3.6.1.4.1.2011.6.4.2.8.1 | NA | ||
row · not-accessible · current It is used for setting the local device to function as a multicast client. When functioning as a multicast client, the local device listens for the NTP multicast packets sent by the server and synchronizes the local clock with the clock source. The indexes of this entry are hwNtpMulticastClientIfType, hwNtpMulticastClientIfNumber and hwNtpMulticastClientIp. | ||||
| ChwNtpMulticastClientIfType | 1.3.6.1.4.1.2011.6.4.2.8.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current Indicates the interface type to configure NTP multicast client. Options: 1. loopback(1) -indicates the loopback interface 2. vlanif(2) -indicates the VLAN interface
| ||||
| ChwNtpMulticastClientIfNumber | 1.3.6.1.4.1.2011.6.4.2.8.1.2 | Integer32 (0..4093) | NA | |
column · Integer32 (0..4093) · not-accessible · current Indicates the interface ID to configure NTP multicast client. Range: 0-4093 Range for the VLAN interface: 1-4093 Range for the loopback interface: 0-31 The interface ID and interface type (hwNtpMulticastClientIfType) together identify the interface for receiving NTP multicast packets. | ||||
| ChwNtpMulticastClientIp | 1.3.6.1.4.1.2011.6.4.2.8.1.3 | IpAddress | NA | |
column · IpAddress · not-accessible · current Indicates the IP address of the NTP multicast client. The IP address can only be a class-D address. | ||||
| ChwNtpMulticastClientRowStatus | 1.3.6.1.4.1.2011.6.4.2.8.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current Indicates the row status. It is used for the create, delete and query operations. In the modify operation, this leaf is not set or issued. Options: 1. createAndGo(4) -specified in the create operation 2. destroy(6) -specified in the delete operation 3. active(1) -always returned in the query operation | ||||
| ThwNtpMulticastServerTable | 1.3.6.1.4.1.2011.6.4.2.9 | NA | ||
table · not-accessible · current It is used for setting the NTP multicast server mode. When functioning in the multicast server mode, the local device serves as the multicast server and periodically sends multicast packets to multicast clients. | ||||
| RhwNtpMulticastServerEntry | 1.3.6.1.4.1.2011.6.4.2.9.1 | NA | ||
row · not-accessible · current It is used for setting the NTP multicast server mode. When functioning in the multicast server mode, the local device serves as the multicast server and periodically sends multicast packets to multicast clients. The indexes of this entry are hwNtpMulticastServerIfType, hwNtpMulticastServerIfNumber and hwNtpMulticastServerIP. | ||||
| ChwNtpMulticastServerIfType | 1.3.6.1.4.1.2011.6.4.2.9.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current Indicates the interface type to configure NTP multicast server. Options: 1. loopback(1) -indicates the loopback interface 2. vlanif(2) -indicates the VLAN interface
| ||||
| ChwNtpMulticastServerIfNumber | 1.3.6.1.4.1.2011.6.4.2.9.1.2 | Integer32 (0..4093) | NA | |
column · Integer32 (0..4093) · not-accessible · current Indicates the interface ID to configure NTP multicast server. Range: 0-4093 Range for the VLAN interface: 1-4093 Range for the loopback interface: 0-31 The interface ID and interface type (hwNtpMulticastServerIfType) together identify the interface for sending NTP multicast packets. | ||||
| ChwNtpMulticastServerIP | 1.3.6.1.4.1.2011.6.4.2.9.1.3 | IpAddress | NA | |
column · IpAddress · not-accessible · current Indicates the IP address of the multicast server for sending multicast packets. The IP address can only be a class-D address. This IP address identifies a multicast server. | ||||
| ChwNtpMulticastServerVersion | 1.3.6.1.4.1.2011.6.4.2.9.1.4 | Integer32 (1..4) | RW | |
column · Integer32 (1..4) · read-write · current Indicates the NTP protocol version. Range: 1-4 Default: 3 The protocol of a later version is compatible with that of an earlier version, but an earlier version is not compatible with a later version. | ||||
| ChwNtpMulticastServerAuthKeyid | 1.3.6.1.4.1.2011.6.4.2.9.1.5 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Indicates the key ID for sending messages to a multicast client. Range: 0-4294967295 for versions 1,2 and 3 Range: 0-65535 for version 4 0 indicates not configured. The key ID identifies a key. The server and the client use the same authentication key. | ||||
| ChwNtpMulticastServerTTL | 1.3.6.1.4.1.2011.6.4.2.9.1.6 | Integer32 (1..255) | RW | |
column · Integer32 (1..255) · read-write · current Indicates the TTL value of the multicast packet sent. Each time a multicast packet is forwarded, TTL value is increased starting from 1 till the configured or default value is reached. When the TTL value reaches configured or default value, the device does not forward the multicast packet. Range: 1-255 Default: 16 | ||||
| ChwNtpMulticastServerRowStatus | 1.3.6.1.4.1.2011.6.4.2.9.1.9 | RowStatus | RC | |
column · RowStatus · read-create · current Indicates the row status. It is used for the create, delete and query operations. In the modify operation, this leaf is not set or issued. Options: 1. createAndGo(4) -specified in the create operation 2. destroy(6) -specified in the delete operation 3. active(1) -always returned in the query operation | ||||
| ThwNtpBroadcastClientTable | 1.3.6.1.4.1.2011.6.4.2.10 | NA | ||
table · not-accessible · current It is used for setting the NTP broadcast client mode. When set to the broadcast client mode, the local device listens for NTP broadcast packets and synchronizes the local clock according to the received broadcast packets. | ||||
| RhwNtpBroadcastClientEntry | 1.3.6.1.4.1.2011.6.4.2.10.1 | NA | ||
row · not-accessible · current It is used for setting the NTP broadcast client mode. When set to the broadcast client mode, the local device listens for NTP broadcast packets and synchronizes the local clock according to the received broadcast packets. The indexes of this entry are hwNtpBroadcastClientIfType and hwNtpBroadcastClientIfNumber. | ||||
| ChwNtpBroadcastClientIfType | 1.3.6.1.4.1.2011.6.4.2.10.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current Indicates the interface type to configure NTP broadcast client. Options: 1. loopback(1) -indicates the loopback interface 2. vlanif(2) -indicates the VLAN interface
| ||||
| ChwNtpBroadcastClientIfNumber | 1.3.6.1.4.1.2011.6.4.2.10.1.2 | Integer32 (0..4093) | NA | |
column · Integer32 (0..4093) · not-accessible · current Indicates the interface ID to configure NTP broadcast client. Range: 0-4093 Range for the VLAN interface: 1-4093 Range for the loopback interface: 0-31 The interface ID and interface type (hwNtpBroadcastClientIfType) together identify the interface for receiving broadcast packets. | ||||
| ChwNtpBroadcastClientRowStatus | 1.3.6.1.4.1.2011.6.4.2.10.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current Indicates the row status. It is used for the create, delete and query operations. In the modify operation, this leaf is not set or issued. Options: 1. createAndGo(4) -specified in the create operation 2. destroy(6) -specified in the delete operation 3. active(1) -always returned in the query operation | ||||
| ThwNtpBroadcastServerTable | 1.3.6.1.4.1.2011.6.4.2.11 | NA | ||
table · not-accessible · current It is used for setting the NTP broadcast server mode. When serving as an NTP broadcast server, the local router periodically sends clock synchronization packets to broadcast address 255.255.255.255 from a specified interface. | ||||
| RhwNtpBroadcastServerEntry | 1.3.6.1.4.1.2011.6.4.2.11.1 | NA | ||
row · not-accessible · current It is used for setting the NTP broadcast server mode. When serving as an NTP broadcast server, the local router periodically sends clock synchronization packets to broadcast address 255.255.255.255 from a specified interface. The indexes of this entry are hwNtpBroadcastServerIfType and hwNtpBroadcastServerIfNumber. | ||||
| ChwNtpBroadcastServerIfType | 1.3.6.1.4.1.2011.6.4.2.11.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current Indicates the interface type to configure NTP broadcast server. Options: 1. loopback(1) -indicates the loopback interface 2. vlanif(2) -indicates the VLAN interface
| ||||
| ChwNtpBroadcastServerIfNumber | 1.3.6.1.4.1.2011.6.4.2.11.1.2 | Integer32 (0..4093) | NA | |
column · Integer32 (0..4093) · not-accessible · current Indicates the interface ID to configure NTP broadcast server. Range: 0-4093 Range for the VLAN interface: 1-4093 Range for the loopback interface: 0-31 The interface ID and interface type (hwNtpBroadcastServerIfType) together identify the interface for sending broadcast packets. | ||||
| ChwNtpBroadcastServerVersion | 1.3.6.1.4.1.2011.6.4.2.11.1.3 | Integer32 (1..4) | RW | |
column · Integer32 (1..4) · read-write · current Indicates the NTP protocol version. Range: 1-4 Default: 3 The protocol of a later version is compatible with an earlier version, but an earlier version is not compatible with a later version. | ||||
| ChwNtpBroadcastServerAuthKeyid | 1.3.6.1.4.1.2011.6.4.2.11.1.4 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Indicates the key ID for sending packets to a broadcast client. Range: 0-4294967295 for versions 1,2 and 3 Range: 0-65535 for version 4 0 means not configured. The key ID identifies a key. The server and the client use the same authentication key. | ||||
| ChwNtpBroadcastServerRowStatus | 1.3.6.1.4.1.2011.6.4.2.11.1.8 | RowStatus | RC | |
column · RowStatus · read-create · current Indicates the row status. It is used for the create, delete and query operations. In the modify operation, this leaf is not set or issued. Options: 1. createAndGo(4) -specified in the create operation 2. destroy(6) -specified in the delete operation 3. active(1) -always returned in the query operation | ||||
| ThwNtpInInterfaceTable | 1.3.6.1.4.1.2011.6.4.2.12 | NA | ||
table · not-accessible · current It is used for enabling or disabling the NTP packet reception capability of a VLAN interface or loopback interface. | ||||
| RhwNtpInInterfaceEntry | 1.3.6.1.4.1.2011.6.4.2.12.1 | NA | ||
row · not-accessible · current It is used for enabling or disabling the NTP packet reception capability of a VLAN interface or loopback interface. The indexes of this entry are hwNtpInInterfaceType and hwNtpInInterfaceIfNumber. | ||||
| ChwNtpInInterfaceType | 1.3.6.1.4.1.2011.6.4.2.12.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current Indicates the interface type of the ingress interface. Options: 1. invalid(0) -indicates the Invalid interface 2. loopback(1) -indicates the loopback interface 3. vlanif(2) -indicates the VLAN interface
| ||||
| ChwNtpInInterfaceIfNumber | 1.3.6.1.4.1.2011.6.4.2.12.1.2 | Integer32 (0..4093) | NA | |
column · Integer32 (0..4093) · not-accessible · current Indicates the interface number of the ingress interface. Range: 0-4093 Range for the VLAN interface: 1-4093 Range for the loopback interface: 0-31 The interface ID and interface type (hwNtpInInterfaceType) together identify the interface for enabling or disabling NTP packets reception. | ||||
| ChwNtpInInterfaceAdminStatus | 1.3.6.1.4.1.2011.6.4.2.12.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current Enables or disables an ingress interface. Options: 1. enabled(1) -indicates that the NTP IPv4 packet reception capability is enabled 2. disabled(2) -indicates that the NTP IPv4 packet reception capability is disabled Default: enabled(1) In the walk operation, only the disabled interfaces are displayed.
| ||||
| ChwNtpInInterfaceAdminIPv6Status | 1.3.6.1.4.1.2011.6.4.2.12.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current Enables or disables an ingress interface. Options: 1. enabled(1) -indicates that the NTP IPv6 packet reception capability is enabled 2. disabled(2) -indicates that the NTP IPv6 packet reception capability is disabled Default: enabled(1) In the walk operation, only the disabled interfaces are displayed.
| ||||
| ThwNtpQueryNtpServerSessionTable | 1.3.6.1.4.1.2011.6.4.2.13 | NA | ||
table · not-accessible · current It is used for querying the information about all the sessions maintained by the NTP service of the local device. | ||||
| RhwNtpQueryNtpServerSessionEntry | 1.3.6.1.4.1.2011.6.4.2.13.1 | NA | ||
row · not-accessible · current It is used for querying the information about all the sessions maintained by the NTP service of the local device. The index of this entry is hwNtpSessionAssociationID. | ||||
| ChwNtpSessionAssociationID | 1.3.6.1.4.1.2011.6.4.2.13.1.1 | Unsigned32 (1..65535) | NA | |
column · Unsigned32 (1..65535) · not-accessible · current Indicates the NTP session ID. Range: 1-65535 The NTP session ID is automatically allocated inside the system and is not user-configurable. | ||||
| ChwNtpSessionClockSourceIp | 1.3.6.1.4.1.2011.6.4.2.13.1.2 | InetAddress | RO | |
column · InetAddress · read-only · current Indicates the IP address of the remote host, that is, IPv4 or IPv6. the host connected to the local device. | ||||
| ChwNtpSessionClockStratum | 1.3.6.1.4.1.2011.6.4.2.13.1.3 | Integer32 (0..16) | RO | |
column · Integer32 (0..16) · read-only · current Indicates the clock stratum of the remote host. Range: 0-16 The value 16 indicates that no clock stratum is configured. | ||||
| ChwNtpSessionReferClockID | 1.3.6.1.4.1.2011.6.4.2.13.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current Specifies the IP address of the remote server or the identifier of the reference clock that the local system clock has been synchronized with. | ||||
| ChwNtpSessionSourceMaster | 1.3.6.1.4.1.2011.6.4.2.13.1.5 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates the flag of the current system clock source. Options: 1. true(1) -indicates that the clock is the current system clock source 2. false(2) -indicates that the clock is not the current system clock source | ||||
| ChwNtpSessionSourcePeer | 1.3.6.1.4.1.2011.6.4.2.13.1.6 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates the flag of the candidate clock source. Options: 1. true(1) -indicates that the clock is the candidate clock source 2. false(2) -indicates that the clock is not the candidate clock source | ||||
| ChwNtpSessionSelected | 1.3.6.1.4.1.2011.6.4.2.13.1.7 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates the flag of the clock source participating in the clock selection. Options: 1. true(1) -indicates that the clock source participates in the clock selection 2. false(2) -indicates that the clock source does not participate in the clock selection | ||||
| ChwNtpSessionCandidate | 1.3.6.1.4.1.2011.6.4.2.13.1.8 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates the flag of the clock as a member of the candidate synchronous clock source list. Options: 1. true(1) -indicates that the clock is a member of the candidate synchronous clock source list 2. false(2) -indicates that the clock is not a member of the candidate synchronous clock source list | ||||
| ChwNtpSessionConfigured | 1.3.6.1.4.1.2011.6.4.2.13.1.9 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates the configured flag. Indicates whether the session is configured by the user on the local host. Options: 1. true(1) -indicates that the session is configured by the user on the local host 2. false(2) -indicates that the session is not configured by the user on the local host | ||||
| ChwNtpSessionPoll | 1.3.6.1.4.1.2011.6.4.2.13.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current Indicates the poll interval for sending packets. Default: 64 Unit: Second
| ||||
| ChwNtpSessionTimeSpending | 1.3.6.1.4.1.2011.6.4.2.13.1.11 | OCTET STRING (SIZE (0..16)) | RO | |
column · OCTET STRING (SIZE (0..16)) · read-only · current Indicates the time since the NTP packet is received from the peer last time. Unit: Second. | ||||
| ChwNtpSessionOffset | 1.3.6.1.4.1.2011.6.4.2.13.1.12 | OCTET STRING (SIZE (0..16)) | RO | |
column · OCTET STRING (SIZE (0..16)) · read-only · current Indicates the offset. It is the offset between the local clock and its peer clock. | ||||
| ChwNtpSessionDelay | 1.3.6.1.4.1.2011.6.4.2.13.1.13 | OCTET STRING (SIZE (0..24)) | RO | |
column · OCTET STRING (SIZE (0..24)) · read-only · current Indicates the round-trip delay for transmitting the NTP packet between the server and client. | ||||
| ChwNtpSessionDisper | 1.3.6.1.4.1.2011.6.4.2.13.1.14 | OCTET STRING (SIZE (0..24)) | RO | |
column · OCTET STRING (SIZE (0..24)) · read-only · current Indicates the dispersion. It means the maximum tolerance between the local clock and its peer clock. | ||||
| ChwNtpSessionReach | 1.3.6.1.4.1.2011.6.4.2.13.1.15 | Integer32 | RO | |
column · Integer32 · read-only · current Indicates the reachability. It means whether the NTP packet sent by the remote host can reach the local device. The value 0 indicates unreachable, and the non-zero value indicates reachable. | ||||
| ChwNtpSessionVpnFlag | 1.3.6.1.4.1.2011.6.4.2.13.1.16 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates the flag of the VPN instance. Options: 1. true(1) -indicates that the clock is in a VPN instance 2. false(2) -indicates that the clock is not in a VPN instance, that is, IPv4 or IPv6. in the public VPN | ||||
| ChwNtpSessionVpn | 1.3.6.1.4.1.2011.6.4.2.13.1.17 | OCTET STRING (SIZE (0..31)) | RO | |
column · OCTET STRING (SIZE (0..31)) · read-only · current Indicates the VPN name to which the clock source belongs, in case of public VPN, value will be NULL. | ||||
| NhwNtpQueryNtpServerStatus | 1.3.6.1.4.1.2011.6.4.2.14 | |||
| ShwNtpStatusClockStatus | 1.3.6.1.4.1.2011.6.4.2.14.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Indicates the clock Status of the local device. Options: 1. unsynchronized(1) -indicates the local clock is not synchronized to the remote server 2. synchronized(2) -indicates the local clock is synchronized to the remote server
| ||||
| ShwNtpStatusClockStratum | 1.3.6.1.4.1.2011.6.4.2.14.2 | Integer32 (1..16) | RO | |
scalar · Integer32 (1..16) · read-only · current Indicates the clock stratum of the local device. Range: 1-16 The value 16 indicates that no clock stratum is configured. | ||||
| ShwNtpStatusReferenceClockID | 1.3.6.1.4.1.2011.6.4.2.14.3 | InetAddress | RO | |
scalar · InetAddress · read-only · current Indicates the reference clock ID of the clock source. The value 0.0.0.0 indicates that clock is not synchronized. | ||||
| ShwNtpStatusNominalFrequency | 1.3.6.1.4.1.2011.6.4.2.14.4 | OCTET STRING (SIZE (0..24)) | RO | |
scalar · OCTET STRING (SIZE (0..24)) · read-only · current Indicates the nominal frequency of the local device. It is the pulse frequency of the clock source and affects the precision of the clock source. Unit: Hz | ||||
| ShwNtpStatusActualFrequency | 1.3.6.1.4.1.2011.6.4.2.14.5 | OCTET STRING (SIZE (0..24)) | RO | |
scalar · OCTET STRING (SIZE (0..24)) · read-only · current Indicates the actual frequency of the local device. It is the pulse frequency of the clock source in actual running. Unit: Hz | ||||
| ShwNtpStatusClockPrecision | 1.3.6.1.4.1.2011.6.4.2.14.6 | OCTET STRING (SIZE (0..16)) | RO | |
scalar · OCTET STRING (SIZE (0..16)) · read-only · current Indicates the precision of the local clock of the local device. The precision of the local clock is indicated by the offset range of the local clock source. 2^N indicates 2 to the power of -N. For example, 2^7 = 0.0078125. | ||||
| ShwNtpStatusClockOffset | 1.3.6.1.4.1.2011.6.4.2.14.7 | OCTET STRING (SIZE (0..24)) | RO | |
scalar · OCTET STRING (SIZE (0..24)) · read-only · current Indicates the clock offset. Indicates the adjustment value of the local clock when it synchronizes to the clock source. The clock offset is the difference between the two clocks before the local clock synchronizes to the clock source. Unit: Millisecond | ||||
| ShwNtpStatusRootDelay | 1.3.6.1.4.1.2011.6.4.2.14.8 | OCTET STRING (SIZE (0..24)) | RO | |
scalar · OCTET STRING (SIZE (0..24)) · read-only · current Indicates the root delay. It indicates the delay between a server and its upper-layer server. Unit: Millisecond | ||||
| ShwNtpStatusRootDispersion | 1.3.6.1.4.1.2011.6.4.2.14.9 | OCTET STRING (SIZE (0..24)) | RO | |
scalar · OCTET STRING (SIZE (0..24)) · read-only · current Indicates the root dispersion. It indicates the dispersion between a server and its upper-layer server. Unit: Millisecond | ||||
| ShwNtpStatusPeerDispersion | 1.3.6.1.4.1.2011.6.4.2.14.10 | OCTET STRING (SIZE (0..24)) | RO | |
scalar · OCTET STRING (SIZE (0..24)) · read-only · current Indicates the peer dispersion. It indicates the maximum tolerance between the local clock and its peer clock. Unit: Millisecond | ||||
| ShwNtpStatusReferenceTime | 1.3.6.1.4.1.2011.6.4.2.14.11 | DateAndTime | RO | |
scalar · DateAndTime · read-only · current Indicates the reference time. It is the adjusted local time. The data type is DateAndTime and the time format is UTC. | ||||
| ShwNtpStatusReferenceClockVpn | 1.3.6.1.4.1.2011.6.4.2.14.12 | OCTET STRING (SIZE (0..31)) | RO | |
scalar · OCTET STRING (SIZE (0..31)) · read-only · current Indicates the VPN in which the reference clock is. | ||||
| ThwNtpUniServerTable | 1.3.6.1.4.1.2011.6.4.2.15 | NA | ||
table · not-accessible · current It is used for setting the NTP unicast server mode. This table provides a leaf for setting an IP address, which specifies a remote server to serve as the time server of the local device. | ||||
| RhwNtpUniServerEntry | 1.3.6.1.4.1.2011.6.4.2.15.1 | NA | ||
row · not-accessible · current It is used for setting the NTP unicast server mode. This table provides a leaf for setting an IP address, which specifies a remote server to serve as the time server of the local device. The indexes of this entry are hwNtpUniServerVpnName, hwNtpUniServerAddressType and hwNtpUniServerAddress. | ||||
| ChwNtpUniServerVpnName | 1.3.6.1.4.1.2011.6.4.2.15.1.1 | OCTET STRING (SIZE (0..31)) | NA | |
column · OCTET STRING (SIZE (0..31)) · not-accessible · current It is used for setting the VPN instance of the remote server. | ||||
| ChwNtpUniServerAddressType | 1.3.6.1.4.1.2011.6.4.2.15.1.2 | InetAddressType | NA | |
column · InetAddressType · not-accessible · current The value of this object identifies the type of the remote server's IP address, that is, IPv4 or IPv6. For IPv4 value is 1 and for IPv6 value is 2. | ||||
| ChwNtpUniServerAddress | 1.3.6.1.4.1.2011.6.4.2.15.1.3 | InetAddress | NA | |
column · InetAddress · not-accessible · current Indicates the IP address of the remote server. The IP address is the address of the host and cannot be a broadcast IP address, multicast IP address, IP address of the clock source or IP address of an interface on the local device. (Supports both IPv4 and IPv6). | ||||
| ChwNtpUniServerVersion | 1.3.6.1.4.1.2011.6.4.2.15.1.4 | Integer32 (1..4) | RW | |
column · Integer32 (1..4) · read-write · current Indicates the NTP protocol version.
Range: 1-4 for IPv4 server
4 for IPv6 server (IPv6 supports only version 4)
Default: 3 for IPv4 server
4 for IPv6 server
The protocol of a later version is compatible with an earlier version,
but an earlier version is not compatible with a later version. | ||||
| ChwNtpUniServerAuthKeyid | 1.3.6.1.4.1.2011.6.4.2.15.1.5 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Indicates the key ID used for sending packets to the remote server. Range: 0-4294967295 for versions 1,2 and 3 Range: 0-65535 for version 4 0 indicates not configured. The key ID identifies a key. When the packets sent by the remote server need to be authenticated, you need to set and issue this leaf. | ||||
| ChwNtpUniServerSourceIfType | 1.3.6.1.4.1.2011.6.4.2.15.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates the interface type. Options: 1. tunnel(1) -indicates the tunnel interface 2. null(2) -indicates the NULL interface 3. meth(3) -indicates the MEth interface 4. vlanif(4) -indicates the VLAN interface 5. loopback(5) -indicates the loopback interface 6. notConfigured(6) -indicates that no source interface is configured When this leaf is set to notConfigured(6), it indicates that no source interface is configured in the case of the create operation, and that the source interface is deleted in the case of the modify operation.
| ||||
| ChwNtpUniServerSourceIfNumber | 1.3.6.1.4.1.2011.6.4.2.15.1.7 | Integer32 (0..4093) | RW | |
column · Integer32 (0..4093) · read-write · current Indicates the interface ID. Range: 0-4093 Range for the tunnel interface: 1-64 Range for the NULL interface: 0 Range for the MEth interface: 0 Range for the VLAN interface: 1-4093 Range for the loopback interface: 0-31 The interface ID and interface type (hwNtpUniServerSourceIfType) together identify the source interface for sending NTP unicast packets. | ||||
| ChwNtpUniServerPreference | 1.3.6.1.4.1.2011.6.4.2.15.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates the server is the preferred server. Options: 1. enable(1) -indicates that the server is preferred. 2. disable(2) -indicates that the server is not preferred. Default: disable(2) When multiple servers exist at the same stratum, the specified server is preferred for synchronization.
| ||||
| ChwNtpUniServerRowStatus | 1.3.6.1.4.1.2011.6.4.2.15.1.9 | RowStatus | RC | |
column · RowStatus · read-create · current Indicates the row status. It is used for the create, delete and query operations. In the modify operation, this leaf is not set or issued. Options: 1. createAndGo(4) -specified in the create operation 2. destroy(6) -specified in the delete operation 3. active(1) -always returned in the query operation | ||||
| ChwNtpUniServerMaxpoll | 1.3.6.1.4.1.2011.6.4.2.15.1.10 | Integer32 (10..17) | RW | |
column · Integer32 (10..17) · read-write · current Indicates NTP maximum poll interval. Range: 10-17 Default: 10 | ||||
| ChwNtpUniServerMinpoll | 1.3.6.1.4.1.2011.6.4.2.15.1.11 | Integer32 (3..13) | RW | |
column · Integer32 (3..13) · read-write · current Indicates NTP minimum poll interval. Range: 3-13 Default: 6 | ||||
| ChwNtpUniServerBurst | 1.3.6.1.4.1.2011.6.4.2.15.1.12 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates packets sent will be in burst mode Options: 1. enable(1) -indicates packets are sent in burst mode 2. disable(2) -indicates packets are sent in normal mode
| ||||
| ChwNtpUniServerIburst | 1.3.6.1.4.1.2011.6.4.2.15.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates packets sent will be in iburst mode Options: 1. enable(1) -indicates packets are sent in iburst mode 2. disable(2) -indicates packets are sent in normal mode
| ||||
| ChwNtpUniServerPreempt | 1.3.6.1.4.1.2011.6.4.2.15.1.14 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates the server can be preempted. Options: 1. enable(1) -indicates that the server can be preempted 2. disable(2) -indicates that the server cannot be preempted Default: disable(2)
| ||||
| ChwNtpUniServerSourceIfName | 1.3.6.1.4.1.2011.6.4.2.15.1.15 | OCTET STRING (SIZE (0..63)) | RW | |
column · OCTET STRING (SIZE (0..63)) · read-write · current Specifies the interface name used for sending out the packets. If not configured, it will be wildcard. | ||||
| ThwNtpUniPeerTable | 1.3.6.1.4.1.2011.6.4.2.16 | NA | ||
table · not-accessible · current It is used for setting the NTP unicast peer mode. This table provides a leaf for setting an IP address, which specifies a remote server to serve as the peer of the local device. | ||||
| RhwNtpUniPeerEntry | 1.3.6.1.4.1.2011.6.4.2.16.1 | NA | ||
row · not-accessible · current It is used for setting the NTP unicast peer mode. This table provides a leaf for setting an IP address, which specifies a remote server to serve as the peer of the local device. The indexes of this entry are hwNtpUniPeerVpnName, hwNtpUniPeerAddressType and hwNtpUniPeerAddress. | ||||
| ChwNtpUniPeerVpnName | 1.3.6.1.4.1.2011.6.4.2.16.1.1 | OCTET STRING (SIZE (0..31)) | NA | |
column · OCTET STRING (SIZE (0..31)) · not-accessible · current It is used for setting the VPN instance of the remote peer. | ||||
| ChwNtpUniPeerAddressType | 1.3.6.1.4.1.2011.6.4.2.16.1.2 | InetAddressType | NA | |
column · InetAddressType · not-accessible · current The value of this object identifies the type of the remote peer's IP address, that is, IPv4 or IPv6. For IPv4 value is 1 and for IPv6 value is 2. | ||||
| ChwNtpUniPeerAddress | 1.3.6.1.4.1.2011.6.4.2.16.1.3 | InetAddress | NA | |
column · InetAddress · not-accessible · current Indicates the IP address of the remote peer. The IP address is the address of the host and cannot be a broadcast IP address, multicast IP address, IP address of the clock source or IP address of an interface on the local device. (Supports both IPv4 and IPv6). | ||||
| ChwNtpUniPeerVersion | 1.3.6.1.4.1.2011.6.4.2.16.1.4 | Integer32 (1..4) | RW | |
column · Integer32 (1..4) · read-write · current Indicates the NTP protocol version.
Range: 1-4 for IPv4 peer
4 for IPv6 peer (IPv6 supports only version 4)
Default: 3 for IPv4 peer
4 for IPv6 peer
The protocol of a later version is compatible with an earlier version,
but an earlier version is not compatible with a later version. | ||||
| ChwNtpUniPeerAuthKeyid | 1.3.6.1.4.1.2011.6.4.2.16.1.5 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Indicates the key ID for sending packets to the unicast peer. Range: 0-4294967295 for versions 1,2 and 3 Range: 0-65535 for version 4 0 indicates not configured. The key ID identifies a key. When the packets sent by the peer need to be authenticated, you need to set and issue this leaf. | ||||
| ChwNtpUniPeerSourceIfType | 1.3.6.1.4.1.2011.6.4.2.16.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates the interface type. Options: 1. tunnel(1) -indicates the tunnel interface 2. null(2) -indicates the NULL interface 3. meth(3) -indicates the MEth interface 4. vlanif(4) -indicates the VLAN interface 5. loopback(5) -indicates the loopback interface 6. notConfigured(6) -indicates that no source interface is configured When this leaf is set to notConfigured(6), it indicates that no source interface is configured in the case of the create operation and that the source interface is deleted in the case of the modify operation.
| ||||
| ChwNtpUniPeerSourceIfNumber | 1.3.6.1.4.1.2011.6.4.2.16.1.7 | Integer32 (0..4093) | RW | |
column · Integer32 (0..4093) · read-write · current Indicates the interface ID. Range: 0-4093 Range for the tunnel interface: 1-64 Range for the NULL interface: 0 Range for the MEth interface: 0 Range for the VLAN interface: 1-4093 Range for the loopback interface: 0-31 The interface ID and interface type (hwNtpUniPeerSourceIfType) together identify an interface. | ||||
| ChwNtpUniPeerPreference | 1.3.6.1.4.1.2011.6.4.2.16.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates the peer is the preferred peer. Options: 1. enable(1) -indicates that the peer is preferred 2. disable(2) -indicates that the peer is not preferred Default: disable(2) When multiple peers exist at the same stratum, the specified peer is preferred for synchronization.
| ||||
| ChwNtpUniPeerRowStatus | 1.3.6.1.4.1.2011.6.4.2.16.1.9 | RowStatus | RC | |
column · RowStatus · read-create · current Indicates the row status. It is used for the create, delete and query operations. In the modify operation, this leaf is not set or issued. Options: 1. createAndGo(4) -specified in the create operation 2. destroy(6) -specified in the delete operation 3. active(1) -always returned in the query operation | ||||
| ChwNtpUniPeerMaxpoll | 1.3.6.1.4.1.2011.6.4.2.16.1.10 | Integer32 (10..17) | RW | |
column · Integer32 (10..17) · read-write · current Indicates NTP maximum poll interval. Range: 10-17 Default: 10 | ||||
| ChwNtpUniPeerMinpoll | 1.3.6.1.4.1.2011.6.4.2.16.1.11 | Integer32 (3..13) | RW | |
column · Integer32 (3..13) · read-write · current Indicates NTP minimum poll interval. Default: 6 | ||||
| ChwNtpUniPeerPreempt | 1.3.6.1.4.1.2011.6.4.2.16.1.12 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates the peer can be preempted. Options: 1. enable(1) -indicates that the peer can be preempted 2. disable(2) -indicates that the peer cannot be preempted Default: disable(2)
| ||||
| ChwNtpUniPeerSourceIfName | 1.3.6.1.4.1.2011.6.4.2.16.1.13 | OCTET STRING (SIZE (0..63)) | RW | |
column · OCTET STRING (SIZE (0..63)) · read-write · current Specifies the interface name used for sending out the packets. If not configured, it will be wildcard. | ||||
| NhwNtpDiscard | 1.3.6.1.4.1.2011.6.4.2.17 | |||
| ShwNtpDiscardMinInterval | 1.3.6.1.4.1.2011.6.4.2.17.1 | Integer32 (1..8) | RW | |
scalar · Integer32 (1..8) · read-write · current Indicates the minimum inter-packet spacing interval Range: 1-8 Default: 1 | ||||
| ShwNtpDiscardAvgInterval | 1.3.6.1.4.1.2011.6.4.2.17.2 | Integer32 (1..8) | RW | |
scalar · Integer32 (1..8) · read-write · current Indicates the average inter-packet spacing interval Range: 1-8 Default: 5 | ||||
| ThwNtpServiceSourceInterfaceVpnTable | 1.3.6.1.4.1.2011.6.4.2.18 | NA | ||
table · not-accessible · current The hwNtpServiceSourceInterfaceVpn table is used to specify the IPv4/IPv6 interface to send NTP messages with specified VPN. In case of no configuration for VPN, default VPN 0 will be considered. In the unicast mode, if you want only one interface to receive the NTP response packets, specify NTP packets sent from all local interfaces to use the same source IP address. In the broadcast and multicast modes, this command is invalid. It is because the NTP service is enabled on the specified interface that actually is the source interface. | ||||
| RhwNtpServiceSourceInterfaceVpnEntry | 1.3.6.1.4.1.2011.6.4.2.18.1 | NA | ||
row · not-accessible · current The hwNtpServiceSourceInterfaceVpn table is used to specify the IPv4/IPv6 interface to send NTP messages with specified VPN. In case of no configuration for VPN, default VPN 0 will be considered. In the unicast mode, if you want only one interface to receive the NTP response packets, specify NTP packets sent from all local interfaces to use the same source IP address. In the broadcast and multicast modes, this command is invalid. It is because the NTP service is enabled on the specified interface that actually is the source interface. The indexes of this entry are hwNtpServiceSourceInterfaceVpnName and hwNtpServiceSourceInterfaceVpnAddressType. | ||||
| ChwNtpServiceSourceInterfaceVpnName | 1.3.6.1.4.1.2011.6.4.2.18.1.1 | OCTET STRING (SIZE (0..31)) | NA | |
column · OCTET STRING (SIZE (0..31)) · not-accessible · current It is used for setting the VPN instance of the source interface. | ||||
| ChwNtpServiceSourceInterfaceVpnAddressType | 1.3.6.1.4.1.2011.6.4.2.18.1.2 | InetAddressType | NA | |
column · InetAddressType · not-accessible · current The value of this object identifies the type of the source interface's IP address, that is, IPv4 or IPv6. For IPv4 value is 1 and for IPv6 value is 2. | ||||
| ChwNtpServiceSourceInterfaceVpnIfName | 1.3.6.1.4.1.2011.6.4.2.18.1.3 | OCTET STRING (SIZE (1..63)) | RW | |
column · OCTET STRING (SIZE (1..63)) · read-write · current Specifies the interface name used for sending out the packets. If not configured, it will be wildcard. | ||||
| ChwNtpServiceSourceInterfaceVpnRowStatus | 1.3.6.1.4.1.2011.6.4.2.18.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current Indicates the row status. It is used for the create, delete and query operations. In the modify operation, this leaf is not set or issued. Options: 1. createAndGo(4) -specified in the create operation 2. destroy(6) -specified in the delete operation 3. active(1) -always returned in the query operation | ||||
| ThwNtpManycastClientTable | 1.3.6.1.4.1.2011.6.4.2.19 | NA | ||
table · not-accessible · current hwNtpManycastClient table specifies NTP manycast client configurations. An interface on the local device to send NTP manycast messages when timeout occurs. The local device runs in manycast client mode and periodically sends manycast messages to the manycast server. Based on the message received from manycast server, the dynamic client-server association is established. While configuring manycast client, multicast IPv4 or IPv6 address must be used. | ||||
| RhwNtpManycastClientEntry | 1.3.6.1.4.1.2011.6.4.2.19.1 | NA | ||
row · not-accessible · current hwNtpManycastClient table specifies NTP manycast client configurations. An interface on the local device to send NTP manycast messages when timeout occurs. The local device runs in manycast client mode and periodically sends manycast messages to the manycast server. Based on the message received from manycast server, the dynamic client-server association is established. While configuring manycast client, multicast IPv4 or IPv6 address must be used. The indexes of this entry are hwNtpManycastClientIfName, hwNtpManycastClientIpType and hwNtpManycastClientIp. | ||||
| ChwNtpManycastClientIfName | 1.3.6.1.4.1.2011.6.4.2.19.1.1 | OCTET STRING (SIZE (1..63)) | NA | |
column · OCTET STRING (SIZE (1..63)) · not-accessible · current Specifies the interface name to configure generic manycast client. | ||||
| ChwNtpManycastClientIpType | 1.3.6.1.4.1.2011.6.4.2.19.1.2 | InetAddressType | NA | |
column · InetAddressType · not-accessible · current The value of this object identifies the type of the manycast IP address, that is, IPv4 or IPv6. For IPv4 value is 1 and for IPv6 value is 2. | ||||
| ChwNtpManycastClientIp | 1.3.6.1.4.1.2011.6.4.2.19.1.3 | InetAddress | NA | |
column · InetAddress · not-accessible · current Indicates the IP address of the manycast client for sending manycast packets. The IP address can only be a class-D address. This IP address identifies a manycast client. (Supports both IPv4 and IPv6). | ||||
| ChwNtpManycastClientAuthKeyId | 1.3.6.1.4.1.2011.6.4.2.19.1.4 | Unsigned32 (0..65535) | RW | |
column · Unsigned32 (0..65535) · read-write · current Indicates the authentication key ID number used while sending messages to the manycast servers. 0 indicates not configured. | ||||
| ChwNtpManycastClientTTL | 1.3.6.1.4.1.2011.6.4.2.19.1.5 | Integer32 (1..255) | RW | |
column · Integer32 (1..255) · read-write · current Indicates the TTL of a manycast packet. Each time a manycast packet is forwarded, TTL value is increased starting from 1 till the configured or default value is reached. When the TTL value reaches configured or default value, the device does not forward the manycast packet. Range: 1-255 Default: 255 | ||||
| ChwNtpManycastClientRowStatus | 1.3.6.1.4.1.2011.6.4.2.19.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current Indicates the row status. It is used for the create, delete and query operations. In the modify operation, this leaf is not set or issued. Options: 1. createAndGo(4) -specified in the create operation 2. destroy(6) -specified in the delete operation 3. active(1) -always returned in the query operation | ||||
| ThwNtpManycastServerTable | 1.3.6.1.4.1.2011.6.4.2.20 | NA | ||
table · not-accessible · current hwNtpManycastServer table specifies ntp service manycast server configuration, we can specify an interface on the local device to receive NTP manycast packets. The local device is run in the manycast server mode. The manycast server responds to manycast client packets. Based on the response, manycast client creates ephemeral association and works in client server mode. If we configure manycast server on the current interface, it is ready to receive NTP manycast messages and the local device runs in the server mode. When we remove manycast server configuration and multicast IP address is not specified then local device searches for default IP addresses. The manycast server with default IP address is 224.0.1.1 in IPv4 network and FFOE::101 in IPv6 address. If the local device finds the default IP address, this command cancels the manycast server configuration, else it does not perform any action. | ||||
| RhwNtpManycastServerEntry | 1.3.6.1.4.1.2011.6.4.2.20.1 | NA | ||
row · not-accessible · current hwNtpManycastServer table specifies ntp service manycast server configuration, we can specify an interface on the local device to receive NTP manycast packets. The local device is run in the manycast server mode. The manycast server responds to manycast client packets. Based on the response, manycast client creates ephemeral association and works in client server mode. If we configure manycast server on the current interface, it is ready to receive NTP manycast messages and the local device runs in the server mode. When we remove manycast server configuration and multicast IP address is not specified then local device searches for default IP addresses. The manycast server with default IP address is 224.0.1.1 in IPv4 network and FFOE::101 in IPv6 address. If the local device finds the default IP address, this command cancels the manycast server configuration, else it does not perform any action. The indexes of this entry are hwNtpManycastServerIfName, hwNtpManycastServerIpType and hwNtpManycastServerIp. | ||||
| ChwNtpManycastServerIfName | 1.3.6.1.4.1.2011.6.4.2.20.1.1 | OCTET STRING (SIZE (1..63)) | NA | |
column · OCTET STRING (SIZE (1..63)) · not-accessible · current Specifies the interface name to configure generic manycast server. | ||||
| ChwNtpManycastServerIpType | 1.3.6.1.4.1.2011.6.4.2.20.1.2 | InetAddressType | NA | |
column · InetAddressType · not-accessible · current The value of this object identifies the type of the manycast IP address, that is, IPv4 or IPv6. For IPv4 value is 1 and for IPv6 value is 2. | ||||
| ChwNtpManycastServerIp | 1.3.6.1.4.1.2011.6.4.2.20.1.3 | InetAddress | NA | |
column · InetAddress · not-accessible · current Indicates the IP address of the manycast server for receiving manycast packets. The IP address can only be a class-D address. This IP address identifies a manycast server. (Supports both IPv4 and IPv6). | ||||
| ChwNtpManycastServerRowStatus | 1.3.6.1.4.1.2011.6.4.2.20.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current Indicates the row status. It is used for the create, delete and query operations. In the modify operation, this leaf is not set or issued. Options: 1. createAndGo(4) -specified in the create operation 2. destroy(6) -specified in the delete operation 3. active(1) -always returned in the query operation | ||||
| ThwNtpMulticastServerGenTable | 1.3.6.1.4.1.2011.6.4.2.21 | NA | ||
table · not-accessible · current It is used for setting the NTP multicast server mode. When functioning in the multicast server mode, the local device serves as the multicast server and periodically sends multicast packets to multicast clients. | ||||
| RhwNtpMulticastServerGenEntry | 1.3.6.1.4.1.2011.6.4.2.21.1 | NA | ||
row · not-accessible · current It is used for setting the NTP multicast server mode. When functioning in the multicast server mode, the local device serves as the multicast server and periodically sends multicast packets to multicast clients. The indexes of this entry are hwNtpMulticastServerGenIfName, hwNtpMulticastServerGenAddressType and hwNtpMulticastServerGenAddr. | ||||
| ChwNtpMulticastServerGenIfName | 1.3.6.1.4.1.2011.6.4.2.21.1.1 | OCTET STRING (SIZE (1..63)) | NA | |
column · OCTET STRING (SIZE (1..63)) · not-accessible · current Specifies the interface name to configure generic multicast server. | ||||
| ChwNtpMulticastServerGenAddressType | 1.3.6.1.4.1.2011.6.4.2.21.1.2 | InetAddressType | NA | |
column · InetAddressType · not-accessible · current The value of this object identifies the type of the multicast IP address, that is, IPv4 or IPv6. For IPv4 value is 1 and for IPv6 value is 2. | ||||
| ChwNtpMulticastServerGenAddr | 1.3.6.1.4.1.2011.6.4.2.21.1.3 | InetAddress | NA | |
column · InetAddress · not-accessible · current Indicates the IP address of the multicast server for sending multicast packets. This IP address identifies a multicast server. (Supports both IPv4 and IPv6). | ||||
| ChwNtpMulticastServerGenVersion | 1.3.6.1.4.1.2011.6.4.2.21.1.4 | Integer32 (1..4) | RW | |
column · Integer32 (1..4) · read-write · current Indicates the NTP protocol version.
Range: 1-4 for IPv4 server
4 for IPv6 server (IPv6 supports only version 4)
Default: 3 for IPv4 server
4 for IPv6 server
The protocol of a later version is compatible with an earlier version,
but an earlier version is not compatible with a later version. | ||||
| ChwNtpMulticastServerGenAuthKeyid | 1.3.6.1.4.1.2011.6.4.2.21.1.5 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Indicates the key ID for sending messages to a multicast client. Range: 0-4294967295 for versions 1,2 and 3 Range: 0-65535 for version 4 0 indicates not configured. The value 0 indicates that no key is configured. The key ID identifies a key. The server and the client use the same authentication key. | ||||
| ChwNtpMulticastServerGenTTL | 1.3.6.1.4.1.2011.6.4.2.21.1.6 | Integer32 (1..255) | RW | |
column · Integer32 (1..255) · read-write · current Indicates the TTL value of the multicast packet sent. Each time a multicast packet is forwarded, TTL value is increased starting from 1 till the configured or default value is reached. When the TTL value reaches configured or default value, the device does not forward the multicast packet. Range: 1-255 Default: 16 | ||||
| ChwNtpMulticastServerGenRowStatus | 1.3.6.1.4.1.2011.6.4.2.21.1.7 | RowStatus | RC | |
column · RowStatus · read-create · current Indicates the row status. It is used for the create, delete and query operations. In the modify operation, this leaf is not set or issued. Options: 1. createAndGo(4) -specified in the create operation 2. destroy(6) -specified in the delete operation 3. active(1) -always returned in the query operation | ||||
| ThwNtpMulticastClientGenTable | 1.3.6.1.4.1.2011.6.4.2.22 | NA | ||
table · not-accessible · current It is used for setting the local device to function as a multicast client. When functioning as a multicast client, the local device listens for the NTP multicast packets sent by the server and synchronizes the local clock with the clock source. | ||||
| RhwNtpMulticastClientGenEntry | 1.3.6.1.4.1.2011.6.4.2.22.1 | NA | ||
row · not-accessible · current It is used for setting the local device to function as a multicast client. When functioning as a multicast client, the local device listens for the NTP multicast packets sent by the server and synchronizes the local clock with the clock source. The indexes of this entry are hwNtpMulticastClientGenIfName, hwNtpMulticastClientGenAddressType and hwNtpMulticastClientGenAddr. | ||||
| ChwNtpMulticastClientGenIfName | 1.3.6.1.4.1.2011.6.4.2.22.1.1 | OCTET STRING (SIZE (1..63)) | NA | |
column · OCTET STRING (SIZE (1..63)) · not-accessible · current Specifies the interface name to configure generic multicast client. | ||||
| ChwNtpMulticastClientGenAddressType | 1.3.6.1.4.1.2011.6.4.2.22.1.2 | InetAddressType | NA | |
column · InetAddressType · not-accessible · current The value of this object identifies the type of the multicast IP address, that is, IPv4 or IPv6. For IPv4 value is 1 and for IPv6 value is 2. | ||||
| ChwNtpMulticastClientGenAddr | 1.3.6.1.4.1.2011.6.4.2.22.1.3 | InetAddress | NA | |
column · InetAddress · not-accessible · current Indicates the IP address of the multicast client to receive multicast packets. This IP address identifies a multicast client. (Supports both IPv4 and IPv6). | ||||
| ChwNtpMulticastClientGenRowStatus | 1.3.6.1.4.1.2011.6.4.2.22.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current Indicates the row status. It is used for the create, delete and query operations. In the modify operation, this leaf is not set or issued. Options: 1. createAndGo(4) -specified in the create operation 2. destroy(6) -specified in the delete operation 3. active(1) -always returned in the query operation | ||||
| ThwNtpBroadcastClientGenTable | 1.3.6.1.4.1.2011.6.4.2.23 | NA | ||
table · not-accessible · current It is used for setting the NTP broadcast client mode. When set to the broadcast client mode, the local device listens for NTP broadcast packets and synchronizes the local clock according to the received broadcast packets. | ||||
| RhwNtpBroadcastClientGenEntry | 1.3.6.1.4.1.2011.6.4.2.23.1 | NA | ||
row · not-accessible · current It is used for setting the NTP broadcast client mode. When set to the broadcast client mode, the local device listens for NTP broadcast packets and synchronizes the local clock according to the received broadcast packets. The index of this entry is hwNtpBroadcastClientGenIfName. | ||||
| ChwNtpBroadcastClientGenIfName | 1.3.6.1.4.1.2011.6.4.2.23.1.1 | OCTET STRING (SIZE (1..63)) | NA | |
column · OCTET STRING (SIZE (1..63)) · not-accessible · current Specifies the interface name to configure generic broadcast client. | ||||
| ChwNtpBroadcastClientGenRowStatus | 1.3.6.1.4.1.2011.6.4.2.23.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current Indicates the row status. It is used for the create, delete and query operations. In the modify operation, this leaf is not set or issued. Options: 1. createAndGo(4) -specified in the create operation 2. destroy(6) -specified in the delete operation 3. active(1) -always returned in the query operation | ||||
| ThwNtpBroadcastServerGenTable | 1.3.6.1.4.1.2011.6.4.2.24 | NA | ||
table · not-accessible · current It is used for setting the NTP broadcast server mode. When serving as an NTP broadcast server, the local router periodically sends clock synchronization packets to broadcast address 255.255.255.255 from a specified interface. | ||||
| RhwNtpBroadcastServerGenEntry | 1.3.6.1.4.1.2011.6.4.2.24.1 | NA | ||
row · not-accessible · current It is used for setting the NTP broadcast server mode. When serving as an NTP broadcast server, the local router periodically sends clock synchronization packets to broadcast address 255.255.255.255 from a specified interface. The index of this entry is hwNtpBroadcastServerGenIfName. | ||||
| ChwNtpBroadcastServerGenIfName | 1.3.6.1.4.1.2011.6.4.2.24.1.1 | OCTET STRING (SIZE (1..63)) | NA | |
column · OCTET STRING (SIZE (1..63)) · not-accessible · current Specifies the interface name to configure generic broadcast server. | ||||
| ChwNtpBroadcastServerGenVersion | 1.3.6.1.4.1.2011.6.4.2.24.1.2 | Integer32 (1..4) | RW | |
column · Integer32 (1..4) · read-write · current Indicates the NTP protocol version.
Range: 1-4 for IPv4 server
4 for IPv6 server (IPv6 supports only version 4)
Default: 3 for IPv4 server
4 for IPv6 server
The protocol of a later version is compatible with an earlier version,
but an earlier version is not compatible with a later version. | ||||
| ChwNtpBroadcastServerGenAuthKeyid | 1.3.6.1.4.1.2011.6.4.2.24.1.3 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Indicates the key ID for sending messages to a broadcast client. Range: 0-4294967295 for versions 1,2 and 3 Range: 0-65535 for version 4 0 indicates not configured. The value 0 indicates that no key is configured. The key ID identifies a key. The server and the client use the same authentication key. | ||||
| ChwNtpBroadcastServerGenRowStatus | 1.3.6.1.4.1.2011.6.4.2.24.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current Indicates the row status. It is used for the create, delete and query operations. In the modify operation, this leaf is not set or issued. Options: 1. createAndGo(4) -specified in the create operation 2. destroy(6) -specified in the delete operation 3. active(1) -always returned in the query operation | ||||
| ThwNtpInInterfaceGenTable | 1.3.6.1.4.1.2011.6.4.2.25 | NA | ||
table · not-accessible · current It is used for enabling or disabling the NTP packet reception capability of a VLAN interface or loopback interface. | ||||
| RhwNtpInInterfaceGenEntry | 1.3.6.1.4.1.2011.6.4.2.25.1 | NA | ||
row · not-accessible · current It is used for enabling or disabling the NTP packet reception capability of a VLAN interface or loopback interface. The index of this entry is hwNtpInInterfaceGenIfName. | ||||
| ChwNtpInInterfaceGenIfName | 1.3.6.1.4.1.2011.6.4.2.25.1.1 | OCTET STRING (SIZE (1..63)) | NA | |
column · OCTET STRING (SIZE (1..63)) · not-accessible · current Interface name is used for enabling or disabling the NTP packet reception capability on specified interface. | ||||
| ChwNtpInInterfaceGenAdminStatus | 1.3.6.1.4.1.2011.6.4.2.25.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Enables or disables an ingress interface. Options: 1. enabled(1) -indicates that the NTP IPv4 packet reception capability is enabled 2. disabled(2) -indicates that the NTP IPv4 packet reception capability is disabled Default: enabled(1) In the walk operation, only the disabled interfaces are displayed.
| ||||
| ChwNtpInInterfaceGenAdminIPv6Status | 1.3.6.1.4.1.2011.6.4.2.25.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Enables or disables an ingress interface. Options: 1. enabled(1) -indicates that the NTP IPv6 packet reception capability is enabled 2. disabled(2) -indicates that the NTP IPv6 packet reception capability is disabled Default: enabled(1) In the walk operation, only the disabled interfaces are displayed.
| ||||
| NhwNtpServerSwitch | 1.3.6.1.4.1.2011.6.4.2.26 | |||
| ShwNtpIPv4ServerSwitch | 1.3.6.1.4.1.2011.6.4.2.26.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Used for enabling or disabling NTP IPv4 server functionality. Options: 1. enable(1) -indicates the NTP IPv4 server functionality is enabled 2. disable(2) -indicates the NTP IPv4 server functionality is disabled Default: enable(1)
| ||||
| ShwNtpIPv6ServerSwitch | 1.3.6.1.4.1.2011.6.4.2.26.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Used for enabling or disabling NTP IPv6 server functionality. Options: 1. enable(1) -indicates the NTP IPv6 server functionality is enabled 2. disable(2) -indicates the NTP IPv6 server functionality is disabled Default: enable(1)
| ||||
| NhwNtpServerSource | 1.3.6.1.4.1.2011.6.4.2.27 | |||
| ThwNtpServerSourceAllInterfaceTable | 1.3.6.1.4.1.2011.6.4.2.27.1 | NA | ||
table · not-accessible · current The hwNtpServerSourceAllInterface table is used to enable the ntp server to listen to all interfaces. Currently supports all interfaces of the specified IPv4 or IPv6 address family type. | ||||
| RhwNtpServerSourceAllInterfaceEntry | 1.3.6.1.4.1.2011.6.4.2.27.1.1 | NA | ||
row · not-accessible · current The hwNtpServerSourceAllInterface table is used to enable the ntp server to listen to all interfaces. Currently supports all interfaces of the specified IPv4 or IPv6 address family type. | ||||
| ChwNtpServerSourceAllInterfaceAddressType | 1.3.6.1.4.1.2011.6.4.2.27.1.1.1 | InetAddressType | NA | |
column · InetAddressType · not-accessible · current The value of this object identifies the type of the source interface's IP address, that is, IPv4 or IPv6. For IPv4 value is 1 and for IPv6 value is 2. | ||||
| ChwNtpServerSourceAllInterfaceRowStatus | 1.3.6.1.4.1.2011.6.4.2.27.1.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current Indicates the row status. It is used for the create, delete and query operations. Options: 1. createAndGo(4) -specified in the create operation 2. destroy(6) -specified in the delete operation 3. active(1) -always returned in the query operation | ||||
| ThwNtpServerSourceInterfaceTable | 1.3.6.1.4.1.2011.6.4.2.27.2 | NA | ||
table · not-accessible · current The hwNtpServerSourceInterface table is used to specify the source interface for ntp server listening. | ||||
| RhwNtpServerSourceInterfaceEntry | 1.3.6.1.4.1.2011.6.4.2.27.2.1 | NA | ||
row · not-accessible · current The hwNtpServerSourceInterface table is used to specify the source interface for ntp server listening. | ||||
| ChwNtpServerSourceInterfaceIfname | 1.3.6.1.4.1.2011.6.4.2.27.2.1.1 | OCTET STRING (SIZE (1..63)) | NA | |
column · OCTET STRING (SIZE (1..63)) · not-accessible · current Specifies the source interface name for ntp server listening. | ||||
| ChwNtpServerSourceInterfaceRowStatus | 1.3.6.1.4.1.2011.6.4.2.27.2.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current Indicates the row status. It is used for the create, delete and query operations. Options: 1. createAndGo(4) -specified in the create operation 2. destroy(6) -specified in the delete operation 3. active(1) -always returned in the query operation | ||||
| ThwNtpServerSourceIpv6Table | 1.3.6.1.4.1.2011.6.4.2.27.3 | NA | ||
table · not-accessible · current The hwNtpServerSourceIpv6Table table is used to specify the source ipv6 address for ntp server listening. | ||||
| RhwNtpServerSourceIpv6Entry | 1.3.6.1.4.1.2011.6.4.2.27.3.1 | NA | ||
row · not-accessible · current The hwNtpServerSourceIpv6Table table is used to specify the source ipv6 address for ntp server listening. | ||||
| ChwNtpServerSourceIpv6Addr | 1.3.6.1.4.1.2011.6.4.2.27.3.1.1 | Ipv6Address | NA | |
column · Ipv6Address · not-accessible · current Specifies the source ipv6 address for ntp server listening. The IP address cannot be a multicast, loopback, link-local, site-local, or unspecified address. | ||||
| ChwNtpServerSourceIpv6VpnName | 1.3.6.1.4.1.2011.6.4.2.27.3.1.2 | OCTET STRING (SIZE (0..31)) | NA | |
column · OCTET STRING (SIZE (0..31)) · not-accessible · current It is used for setting the VPN instance of the source ipv6 address. | ||||
| ChwNtpServerSourceIpv6RowStatus | 1.3.6.1.4.1.2011.6.4.2.27.3.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current Indicates the row status. It is used for the create, delete and query operations. Options: 1. createAndGo(4) -specified in the create operation 2. destroy(6) -specified in the delete operation 3. active(1) -always returned in the query operation | ||||
| NhwNtpConformance | 1.3.6.1.4.1.2011.6.4.3 | |||
| NhwNtpCompliances | 1.3.6.1.4.1.2011.6.4.3.1 | |||
| MhwNtpCompliance | 1.3.6.1.4.1.2011.6.4.3.1.1 | |||
compliance · current The compliance statement for systems supporting the Ntp-MIB.
| ||||
| GhwNtpObjGroup | 1.3.6.1.4.1.2011.6.4.3.1.2 | |||
group · current This objects are used to provide NTP functionality through MIB browser.
| ||||