HUAWEI-MINM-MIB
HUAWEI Technology Co.,LtdThe HUAWEI-MINM-MIB contains objects to Manage configuration for MINM feature.
snmptranslate -m HUAWEI-MINM-MIB -Tpsnmpwalk -v2c -c <community> -m HUAWEI-MINM-MIB <host> 1.3.6.1.4.1.2011.5.25.133.1Imports
| HUAWEI-L2IF-MIB | VlanList |
|---|---|
| HUAWEI-MIB | hwDatacomm |
| IANA-ADDRESS-FAMILY-NUMBERS-MIB | AddressFamilyNumbers |
| IF-MIB | InterfaceIndex, InterfaceIndexOrZero |
| P-BRIDGE-MIB | EnabledStatus |
| Q-BRIDGE-MIB | VlanId, VlanIdOrNone |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
| TRANSPORT-ADDRESS-MIB | TransportAddress, TransportDomain |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| NhwMINM | 1.3.6.1.4.1.2011.5.25.133 | |||
| IhwMinMMIB | 1.3.6.1.4.1.2011.5.25.133.1 | |||
identity The HUAWEI-MINM-MIB contains objects to Manage configuration for MINM feature. | ||||
| NhwMinMObjects | 1.3.6.1.4.1.2011.5.25.133.1.1 | |||
| NhwMinMSystemObjects | 1.3.6.1.4.1.2011.5.25.133.1.1.1 | |||
| ShwMinMVirtualMac | 1.3.6.1.4.1.2011.5.25.133.1.1.1.1 | MacAddress | RW | |
scalar · MacAddress · read-write · current Indicates the virtual MAC address of the device. By default, there is no virtual MAC address. | ||||
| ShwMinMMacTnlBVlanListLow | 1.3.6.1.4.1.2011.5.25.133.1.1.1.2 | VlanList (SIZE (256)) | RW | |
scalar · VlanList (SIZE (256)) · read-write · current Indicates the starting value of the backbone VLAN that is assigned to the mac-tunnel. | ||||
| ShwMinMMacTnlBVlanListHigh | 1.3.6.1.4.1.2011.5.25.133.1.1.1.3 | VlanList (SIZE (256)) | RW | |
scalar · VlanList (SIZE (256)) · read-write · current Indicates the ending value of the backbone VLAN that is assigned to the mac-tunnel. | ||||
| ShwMinMTrapEnable | 1.3.6.1.4.1.2011.5.25.133.1.1.1.4 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current Indicates that the Snmp-Agent Trap is enabled on the Mac-in-Mac.By default, it is disable. | ||||
| NhwMinMMacTnlObjects | 1.3.6.1.4.1.2011.5.25.133.1.1.2 | |||
| NhwMinMMacTnlCfgObjects | 1.3.6.1.4.1.2011.5.25.133.1.1.2.1 | |||
| ShwMinMMacTnlIndexNext | 1.3.6.1.4.1.2011.5.25.133.1.1.2.1.1 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current Indicates the Index of the Next Mac Tunnel.It begins with one. | ||||
| ThwMinMMacTnlCfgTable | 1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2 | NA | ||
table · not-accessible · current Indicates a configuration information table of Mac-tunnel. | ||||
| RhwMinMMacTnlCfgEntry | 1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1 | NA | ||
row · not-accessible · current Indicates the entry in the tunnel configuration table of the mac-tunnel.
| ||||
| ChwMinMMacTnlIndex | 1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current Indicates the index of Mac Tunnel. It begins with one. | ||||
| ChwMinMMacTnlName | 1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.11 | OCTET STRING (SIZE (1..31)) | RC | |
column · OCTET STRING (SIZE (1..31)) · read-create · current Indicates the name of the mac-tunnel. It is a character string with a maximum of 31 bytes and a minimum of 1 byte. | ||||
| ChwMinMMacTnlDMac | 1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.12 | MacAddress | RC | |
column · MacAddress · read-create · current Indicates the remote MAC address of the current mac-tunnel. By default, there is no such configuration. | ||||
| ChwMinMMacTnlBVlanID | 1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.13 | VlanIdOrNone | RC | |
column · VlanIdOrNone · read-create · current Indicates BVLAN value of the current BVLAN used by the mac-tunnel: It ranges from 1 to 4094. By default, BVLAN value is not configured. The VLAN here must have been created and be in the backbone VLAN used by the mac-tunnel. The special value of zero is used to indicate that no VLAN-ID is present or used. | ||||
| ChwMinMMacTnlBVlanType | 1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.14 | OCTET STRING (SIZE (2)) | RC | |
column · OCTET STRING (SIZE (2)) · read-create · current Indicates the B-TAG type of the BVLAN. By default, it is 88a8. | ||||
| ChwMinMMacTnlPriorityValue | 1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.15 | Integer32 (0..8) | RC | |
column · Integer32 (0..8) · read-create · current Indicates priority level of the mac-tunnel. It is used to set the priority field of B-TAG. There are eight priority levels. By default, the I-TAG priority is used. The special value of eight is used to indicate that priority was unknown or none. | ||||
| ChwMinMMacTnlOutgoingIfIndex | 1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.16 | InterfaceIndexOrZero | RC | |
column · InterfaceIndexOrZero · read-create · current Indicates the port used in the mac-tunnel. By default, it is not configured. The value zero is used to indicate that interface was unknown or none. | ||||
| ChwMinMMacTnlSplitHorizonEnable | 1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.17 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current Indicates the split horizon of tunnels. By default, it is enabled. When split horizon is enabled on two mac-tunnels, the two tunnels cannot exchange packets. | ||||
| ChwMinMMacTnlAdminStatus | 1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.18 | HWAdminStatus | RC | |
column · HWAdminStatus · read-create · current Indicates the administration status of the mac-tunnel. | ||||
| ChwMinMMacTnlOperStatus | 1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.19 | HWOperStatus | RO | |
column · HWOperStatus · read-only · current Indicates the physical state of the mac-tunnel. | ||||
| ChwMinMMacTnlDescription | 1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.20 | OCTET STRING (SIZE (1..80)) | RC | |
column · OCTET STRING (SIZE (1..80)) · read-create · current Indicates descriptive information of the static Mac-In-Mac tunnel. Its length ranges from 1 to 80 bytes and the first byte cannot be a space. | ||||
| ChwMinMMacTnlStatisticsReset | 1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.21 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current Indicates the reset on traffic statistics of the mac-tunnel. | ||||
| ChwMinMMacTnlPriorityTrustITag | 1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.22 | TruthValue | RC | |
column · TruthValue · read-create · current Indicates that the I-TAG priority is copied to the mac-tunnel. By default, the I-TAG priority is not copied to the mac-tunnel. | ||||
| ChwMinMMacTnlDeiTrustIDei | 1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.23 | TruthValue | RC | |
column · TruthValue · read-create · current Indicates that the I-DEI priority is copied to the mac-tunnel. By default, the I-DEI priority is not copied to the mac-tunnel. | ||||
| ChwMinMMacTnlDeiValue | 1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.24 | Integer32 | RC | |
column · Integer32 · read-create · current Indicates DEI of the mac-tunnel. It is used to set the DEI field of B-TAG. When DEI is true, the value is set to 1. When DEI is false, the value is set to 0. By default, the I-DEI priority is not copied to the mac-tunnel, and the DEI is false. When the value of the DEI is set to 2, it indicates that no DEI is configured on the tunnel. | ||||
| ChwMinMMacTnlRowStatus | 1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.51 | RowStatus | RC | |
column · RowStatus · read-create · current Indicates the RowStatus. The following three actions are used: active, createAndGo, destroy | ||||
| ThwMinMMacTnlStatisticsTable | 1.3.6.1.4.1.2011.5.25.133.1.1.2.1.3 | NA | ||
table · not-accessible · current Indicates a query for the hwMinMMacTnlStatisticsTable of the mac-tunnel. | ||||
| RhwMinMMacTnlStatisticsEntry | 1.3.6.1.4.1.2011.5.25.133.1.1.2.1.3.1 | NA | ||
row · not-accessible · current Indicates an entry query for the hwMinMMacTnlStatisticsTable of the mac-tunnel.
| ||||
| ChwMinMMacTnlInPackets | 1.3.6.1.4.1.2011.5.25.133.1.1.2.1.3.1.11 | Counter64 | RO | |
column · Counter64 · read-only · current Indicates the number of packets received by the mac-tunnel. | ||||
| ChwMinMMacTnlInBytes | 1.3.6.1.4.1.2011.5.25.133.1.1.2.1.3.1.12 | Counter64 | RO | |
column · Counter64 · read-only · current Indicates the number of bytes received by the mac-tunnel. | ||||
| ChwMinMMacTnlOutPackets | 1.3.6.1.4.1.2011.5.25.133.1.1.2.1.3.1.13 | Counter64 | RO | |
column · Counter64 · read-only · current Indicates the number of packets sent by the mac-tunnel. | ||||
| ChwMinMMacTnlOutBytes | 1.3.6.1.4.1.2011.5.25.133.1.1.2.1.3.1.14 | Counter64 | RO | |
column · Counter64 · read-only · current Indicates the number of bytes sent by the mac-tunnel. | ||||
| ThwMacTnlNameToIndexMappingTable | 1.3.6.1.4.1.2011.5.25.133.1.1.2.1.4 | NA | ||
table · not-accessible · current Indicates the mapping table of the tunnel name and tunnel index. | ||||
| RhwMacTnlNameToIndexMappingEntry | 1.3.6.1.4.1.2011.5.25.133.1.1.2.1.4.1 | NA | ||
row · not-accessible · current Indicates the mapping table entry of the tunnel name and tunnel index.
| ||||
| ChwMacTnlName | 1.3.6.1.4.1.2011.5.25.133.1.1.2.1.4.1.1 | OCTET STRING (SIZE (1..31)) | NA | |
column · OCTET STRING (SIZE (1..31)) · not-accessible · current Indicates the name of the mac-tunnel. It is a character string with a maximum of 31 bytes and a minimum of 1 byte. | ||||
| ChwMacTnlIndex | 1.3.6.1.4.1.2011.5.25.133.1.1.2.1.4.1.11 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Indicates the tunnel index.It begins with one. | ||||
| NhwMinMMacTnlOamObjects | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2 | |||
| ThwMinMMacTnlCCTable | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.1 | NA | ||
table · not-accessible · current Indicates the parameters used to describe CC packets. | ||||
| RhwMinMMacTnlCCEntry | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.1.1 | NA | ||
| ChwMinMMacTnlCfmEnable | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.1.1.11 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current Indicates that CFM is enabled. | ||||
| ChwMinMMacTnlCCInterval | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.1.1.12 | HwDot1agCfmCcmInterval | RC | |
column · HwDot1agCfmCcmInterval · read-create · current Indicates the time interval of CC packets. | ||||
| ChwMinMMacTnlSomeRMepCcmDefect | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.1.1.13 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates a connectivity failure of tunnels. | ||||
| ChwMinMMacTnlSomeRdiDefect | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.1.1.14 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates whether the RDI packet from the remote end is received. | ||||
| ChwMinMMacTnlCcReceiveEnabled | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.1.1.15 | TruthValue | RC | |
column · TruthValue · read-create · current Whether CC reception is enabled. | ||||
| ChwMinMMacTnlCCRowStatus | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.1.1.51 | RowStatus | RC | |
column · RowStatus · read-create · current Indicates the row status. | ||||
| ThwMinMMacTnlLbTable | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.2 | NA | ||
table · not-accessible · current Indicates the parameters used to describe Lb packets. | ||||
| RhwMinMMacTnlLbEntry | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.2.1 | NA | ||
| ChwMinMMacTnlLbmEnable | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.2.1.11 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current Indicates that the MAC Ping is started inside the tunnel. | ||||
| ChwMinMMacTnlLbmTimeStamp | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.2.1.12 | TimeStamp | RO | |
column · TimeStamp · read-only · current Indicates the operation time. | ||||
| ChwMinMMacTnlLbmTimeOut | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.2.1.13 | Integer32 | RC | |
column · Integer32 · read-create · current Indicates the timeout period entered by a user, in ms. By default, it is 2000. | ||||
| ChwMinMMacTnlLbmTimes | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.2.1.14 | Integer32 | RC | |
column · Integer32 · read-create · current Indicates the number of times that Ping is entered. | ||||
| ChwMinMMacTnlLbmSize | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.2.1.15 | Integer32 (64..1480) | RC | |
column · Integer32 (64..1480) · read-create · current Indicates the size of an Lbm packet. | ||||
| ChwMinMMacTnlLbrIn | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.2.1.16 | Counter32 | RO | |
column · Counter32 · read-only · current Indicates the number of valid LBR packets received | ||||
| ChwMinMMacTnlLbmResult | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.2.1.17 | TruthValue | RO | |
column · TruthValue · read-only · current Whether the MAC ping operation for a tunnel is over. | ||||
| ChwMinMMacTnlLbRowStatus | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.2.1.51 | RowStatus | RC | |
column · RowStatus · read-create · current Indicates the row status. | ||||
| ThwMinMMacTnlLbResultTable | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.3 | NA | ||
table · not-accessible · current Performance statistics returned by using the MAC ping command for a tunnel. | ||||
| RhwMinMMacTnlLbResultEntry | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.3.1 | NA | ||
| ChwMinMMacTnlMacPingRTTMin | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.3.1.11 | Gauge32 | RO | |
column · Gauge32 · read-only · current The minimum round trip time. | ||||
| ChwMinMMacTnlMacPingRTTMax | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.3.1.12 | Gauge32 | RO | |
column · Gauge32 · read-only · current The maximum round trip time. | ||||
| ChwMinMMacTnlMacPingRTTAvg | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.3.1.13 | Gauge32 | RO | |
column · Gauge32 · read-only · current The average round trip time. | ||||
| ChwMinMMacTnlMacPingPacketLossRatio | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.3.1.14 | Gauge32 | RO | |
column · Gauge32 · read-only · current The packet loss ratio. | ||||
| ThwMinMMacTnlLtmTable | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4 | NA | ||
table · not-accessible · current Indicates the parameters used to describe Ltm packets. | ||||
| RhwMinMMacTnlLtmEntry | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4.1 | NA | ||
| ChwMinMMacTnlLtmEnable | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4.1.11 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current Indicates that the MAC Trace is started inside the tunnel. | ||||
| ChwMinMMacTnlLtmTimeStamp | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4.1.12 | TimeStamp | RO | |
column · TimeStamp · read-only · current The time stamp for enabling the MAC trace operation for a tunnel. | ||||
| ChwMinMMacTnlLtmTimeOut | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4.1.13 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current Indicates the timeout period entered by a user, in ms. By default, it is 2000. | ||||
| ChwMinMMacTnlLtmTtl | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4.1.14 | Unsigned32 (0..255) | RC | |
column · Unsigned32 (0..255) · read-create · current Indicates the living cycle of Ltm packets. | ||||
| ChwMinMMacTnlLtmFlags | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4.1.15 | Bits | RO | |
column · Bits · read-only · current The flags field of an LTM packet.
| ||||
| ChwMinMMacTnlLtmSeqNumber | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4.1.16 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The sequence number of an LTM packet. | ||||
| ChwMinMMacTnlLtmEgressIdentifier | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4.1.17 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current Indicates the egress ID of Ltm packets. | ||||
| ChwMinMMacTnlLtmResult | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4.1.18 | TruthValue | RO | |
column · TruthValue · read-only · current Two conditions are used to determine whether the MAC trace operation to a tunnel is over: (1) The peer of a tunnel has been traced. (2) The preset timer for timeout is triggered. Either condition indicates the completion of an operation. | ||||
| ChwMinMMacTnlLtmRowStatus | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4.1.51 | RowStatus | RC | |
column · RowStatus · read-create · current Indicates the row status. | ||||
| ThwMinMMacTnlLtrTable | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5 | NA | ||
table · not-accessible · current Indicates the parameters used to describe Ltr packets. | ||||
| RhwMinMMacTnlLtrEntry | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1 | NA | ||
row · not-accessible · current Indicates the linktraceRelay table entry. | ||||
| ChwMinMMacTnlLtrSeqNumber | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current Indicates the parameters used to describe Ltr packets. | ||||
| ChwMinMMacTnlLtrReceiveOrder | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.2 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current An index to distinguish among multiple LTRs with the same LTR Transaction Identifier field value. | ||||
| ChwMinMMacTnlLtrTtl | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.11 | Unsigned32 (0..255) | RO | |
column · Unsigned32 (0..255) · read-only · current TTL field value for a returned LTR. | ||||
| ChwMinMMacTnlLtrForwarded | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.12 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates an identifier that shows whether the LTM packet should be forwarded to the next hop. | ||||
| ChwMinMMacTnlLtrLastEgressIdentifier | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.13 | OCTET STRING (SIZE (8)) | RO | |
column · OCTET STRING (SIZE (8)) · read-only · current LTR packet is a response packet to a LTM packet. The LTM packet is the last packet sent by a port on a device. This variable indicates the port identifier of the LTM packet. The last six bytes indicate the MAC address, and the first two bytes represent the board number and outbound port number respectively. | ||||
| ChwMinMMacTnlLtrNextEgressIdentifier | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.14 | OCTET STRING (SIZE (8)) | RO | |
column · OCTET STRING (SIZE (8)) · read-only · current If the LTM packet needs to be forwarded to the next hop, the port identifier of the next hop should be added to the TVL field in the response LTR packet. The last six bytes indicate the MAC address, and the first two bytes represent the board number and outbound port number respectively. | ||||
| ChwMinMMacTnlLtrRelay | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.15 | HwDot1agCfmRelayActionFieldValue | RO | |
column · HwDot1agCfmRelayActionFieldValue · read-only · current Indicates the value in the Relay Action field. | ||||
| ChwMinMMacTnlLtrIngress | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.16 | HwDot1agCfmIngressActionFieldValue | RO | |
column · HwDot1agCfmIngressActionFieldValue · read-only · current The value returned in the Ingress Action Field of the LTM. | ||||
| ChwMinMMacTnlLtrIngressMac | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.17 | MacAddress | RO | |
column · MacAddress · read-only · current MAC address returned in the ingress MAC address field. | ||||
| ChwMinMMacTnlLtrIngressPortIdSubtype | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.18 | HwLldpPortIdSubtype | RO | |
column · HwLldpPortIdSubtype · read-only · current Format of the Ingress Port ID. | ||||
| ChwMinMMacTnlLtrIngressPortId | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.19 | HwLldpPortId | RO | |
column · HwLldpPortId · read-only · current Ingress Port ID. The format of this object is determined by the value of the dot1agCfmLtrIngressPortIdSubtype object. | ||||
| ChwMinMMacTnlLtrEgress | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.20 | HwDot1agCfmEgressActionFieldValue | RO | |
column · HwDot1agCfmEgressActionFieldValue · read-only · current The value returned in the Egress Action Field of the LTM. | ||||
| ChwMinMMacTnlLtrEgressMac | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.21 | MacAddress | RO | |
column · MacAddress · read-only · current MAC address returned in the egress MAC address field. | ||||
| ChwMinMMacTnlLtrEgressPortIdSubtype | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.22 | HwLldpPortIdSubtype | RO | |
column · HwLldpPortIdSubtype · read-only · current Format of the egress Port ID. | ||||
| ChwMinMMacTnlLtrEgressPortId | 1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.23 | HwLldpPortId | RO | |
column · HwLldpPortId · read-only · current Egress Port ID. The format of this object is determined by the value of the dot1agCfmLtrEgressPortIdSubtype object. | ||||
| NhwMinMMacTnlApsObjects | 1.3.6.1.4.1.2011.5.25.133.1.1.2.3 | |||
| ThwMinMMacTnlApsCfgTable | 1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1 | NA | ||
table · not-accessible · current Indicates the configuration table for the Aps protection of the mac-tunnel. | ||||
| RhwMinMMacTnlApsCfgEntry | 1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1 | NA | ||
row · not-accessible · current Indicates the configuration table entry for the Aps protection of the mac-tunnel.
| ||||
| ChwMinMProtectMacTnlIndex | 1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.11 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Indicates the index of ProtectMacTunnel. It begins with one. | ||||
| ChwMinMProtectMacTnlName | 1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.12 | OCTET STRING (SIZE (1..31)) | RC | |
column · OCTET STRING (SIZE (1..31)) · read-create · current Indicates the tunnel name of the protective mac-tunnel. | ||||
| ChwMinMProtectMacTnlDMac | 1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.13 | MacAddress | RO | |
column · MacAddress · read-only · current Indicates the remote MAC address of the protecting mac-tunnel. | ||||
| ChwMinMProtectMacTnlBVlanID | 1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.14 | VlanId | RO | |
column · VlanId · read-only · current Indicates BVLAN value used by the protecting mac-tunnel: It ranges from 1 to 4094. | ||||
| ChwMinMProtectApsSwitchMode | 1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.15 | HWProtectMode | RC | |
column · HWProtectMode · read-create · current Indicates the protection modes of the G.8031 Aps protection group of mac-tunnels. oneplusonebidirectional(1): 1 + 1 switchover protection modes on both ends oneplusoneunidirectional(2): 1 + 1 switchover protection modes on a single end onetoone(3): 1:1 protection mode By the default, the 1:1 protection mode is used. | ||||
| ChwMinMProtectProtocolApsEnable | 1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.16 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current Indicates that the G.8031 protocol of Aps protection group in the mac-tunnel is enabled. By default, the protocol is disabled. | ||||
| ChwMinMProtectApsFastInterval | 1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.17 | HWApsInterval | RC | |
column · HWApsInterval · read-create · current Indicates the configuration of fast sending time interval for each protection group. The time intervals for fast sending of Aps packets described in the G.8031 are as follows: By default, the time interval for fast sending of Aps packets in G.8031 is 3.3 ms. Optional values for sending interval are as follows: ApsInterval3dot3ms(1): indicates a sending interval of 3.3 ms. ApsInterval5ms(3): indicates a sending interval of 5 ms. ApsInterval10ms(3): indicates a sending interval of 10 ms. ApsInterval5ms(4): indicates a sending interval of 15 ms. ApsInterval20ms(5): indicates a sending interval of 20 ms. ApsInterval30ms(6): indicates a sending interval of 30 ms. | ||||
| ChwMinMProtectHoldoffTime | 1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.18 | Integer32 (0..100) | RC | |
column · Integer32 (0..100) · read-create · current Indicates the switchover restoration time of Aps protection groups in the mac-tunnel, in 100 ms. It ranges from 0 to 100. By default, the switchover restoration time is not delayed. The value of delay is zero. | ||||
| ChwMinMProtectRevMode | 1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.19 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current Indicates the non-restoration protection switchover mode of Aps protection group in mac-tunnels. | ||||
| ChwMinMProtectRevWtrTime | 1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.20 | Integer32 (0..120) | RC | |
column · Integer32 (0..120) · read-create · current Indicates the restoration time of restoration protection switchover mode of Aps protection group in mac-tunnels. By default, the switchover mode is restoration. The restoration time is five minutes. | ||||
| ChwMinMProtectSwitchOperation | 1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.21 | HWSwitchOperation | RC | |
column · HWSwitchOperation · read-create · current Indicates the switchover commands for the Aps protection group of mac-tunnels. The priority levels in a descending order are: clear, lock, force and manual. clear(1): clears the lock, force and manual commands, and WTR state on the local end. After the local commands are cleared, the WTR state cannot be entered. lock(2): locks the services on the working tunnel. force(3): forcibly switches the services to the protection tunnel when the protection tunnel is in sound state. manual(4): forcibly switches the services to the protection channel when the working and the protection tunnel are in sound state. null(5):there is not manual commands. | ||||
| ChwMinMProtectProtocol | 1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.22 | HWProtectProtocol | RC | |
column · HWProtectProtocol · read-create · current Indicates the protection protocol of the protection group of mac-tunnels. ProtocolAPS(1): use an APS protocol to enhance the protection switching. ProtocolOAM(2): not using any APS protocol to enhance the protection switching. By the default, the ProtocolOAM is used. | ||||
| ChwMinMProtectRowStatus | 1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.51 | RowStatus | RC | |
column · RowStatus · read-create · current Indicates the RowStatus. The following three actions are used: active, createAndGo, destroy | ||||
| NhwMinMSIObjects | 1.3.6.1.4.1.2011.5.25.133.1.1.3 | |||
| ShwMinMSIIndexNext | 1.3.6.1.4.1.2011.5.25.133.1.1.3.1 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current Indicates the index of the next Service Instance. It begins with one. | ||||
| ThwMinMSICfgTable | 1.3.6.1.4.1.2011.5.25.133.1.1.3.2 | NA | ||
table · not-accessible · current Indicates the configuration table of a service instance. | ||||
| RhwMinMSICfgEntry | 1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1 | NA | ||
row · not-accessible · current Indicates the configuration table entry of a service instance.
| ||||
| ChwMinMSIIndex | 1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current Indicates the Index of Service Instance.It begins with one. | ||||
| ChwMinMSIID | 1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.11 | Integer32 (0..16777216) | RC | |
column · Integer32 (0..16777216) · read-create · current Indicates the ID of a service instance. It can be any value within 24 bits. By default, the value is null. One ID can be configured to one service instance only. | ||||
| ChwMinMSIName | 1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.12 | OCTET STRING (SIZE (1..31)) | RC | |
column · OCTET STRING (SIZE (1..31)) · read-create · current Indicates the name of a service instance. It is a character string with a maximum of 31 bytes and a minimum of 1 byte. | ||||
| ChwMinMSIServiceType | 1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.13 | HWServiceType | RC | |
column · HWServiceType · read-create · current Indicates the type of a service instance as follows: p2p: indicates the type of a point-to-point service instance. mp2mp: indicates the type of a multi-point to multi-point service instance. By default, the service type is mp2mp. | ||||
| ChwMinMSIPriorityTrust8021p | 1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.14 | TruthValue | RC | |
column · TruthValue · read-create · current Indicates that the priority of user packet based on 802.1Q is trusted. By default, no user priority is trusted. | ||||
| ChwMinMSIPriorityValue | 1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.15 | Integer32 (0..8) | RC | |
column · Integer32 (0..8) · read-create · current Indicates priority level of a service instance. It is used to set the priority field of I-TAG. By default, no user priority is trusted and the priority is zero. The special value of eight is used to indicate that priority of user is trusted. | ||||
| ChwMinMSIInterfaceType | 1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.16 | HWInterfaceType | RC | |
column · HWInterfaceType · read-create · current Indicates the interface type of a service instance. transparent: indicates the transparent transmission mode. one-to-one: indicates the one-to-one in the s-tagged mode. bundling: indicates the bundling in the s-tagged mode. By default, the s-tagged bundling mode is used. | ||||
| ChwMinMSIAdminStatus | 1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.17 | HWAdminStatus | RC | |
column · HWAdminStatus · read-create · current Indicates the administration status of a service instance. | ||||
| ChwMinMSIOperStatus | 1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.18 | HWOperStatus | RO | |
column · HWOperStatus · read-only · current Indicates the physical status of a service instance. | ||||
| ChwMinMSIMacLearningEnable | 1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.19 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current Disable the MAC learning of a service instance. By default, the MAC learning is enabled. This object applies to the service instance of mp2mp only. It is invalid in the service type of p2p. | ||||
| ChwMinMSIMacLimitAction | 1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.20 | HWProcessBehavior | RC | |
column · HWProcessBehavior · read-create · current Indicates MAC learning restriction of a service instance. After the number of MAC address entries reaches the limit, the system takes the following actions: discard: indicates that packets with new MAC address are discarded. forward: indicates that packets with new MAC address are forwarded, but the address is not added to the MAC address table. | ||||
| ChwMinMSIMacLimitAlarm | 1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.21 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current Indicates MAC learning restriction of a service instance. Indicates whether alarm should be sent after the number of MAC address entries reaches the limit as follows: disable: indicates no alarm is sent. enable: indicates alarm is sent in syslog. | ||||
| ChwMinMSIMacLimitMaxinum | 1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.22 | Integer32 (0..131072) | RC | |
column · Integer32 (0..131072) · read-create · current Indicates MAC learning restriction of a service instance. The number of MAC addresses that can be learnt by the current service instance ranges from 0 to 131072. When the number is set to zero, no restriction is imposed on the address learning. | ||||
| ChwMinMSIL2CtrlProProcess | 1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.23 | Bits | RC | |
column · Bits · read-create · current This configuration is unsuitable for the case of port+vlan+cos mapping. Layer 2 control packets of a service instance are handled as follows: By default, all layer 2 control packets are transmitted transparently and all bits are 0; if a bit is 1, it indicates that the packets of this protocol will be discarded. If bit 0 is 1, it indicates that all layer 2 control packets will be discarded. If bit 1 is 1, it indicates that the STP packets will be discarded. If bit 2 is 1, it indicates that the LLAP packets will be discarded. If bit 3 is 1, it indicates that the LACP packets will be discarded. If bit 4 is 1, it indicates that the DOT3AH packets will be discarded. If bit 5 is 1, it indicates that the DOTLAG packets will be discarded.
| ||||
| ChwMinMSIUnknownUnicastEnbale | 1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.24 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current Indicates how a service instance processes an unknown unicast packet. By default, the service instance is allowed to broadcast the unknown unicast packet. This object applies to the mp2mp service instance only. | ||||
| ChwMinMSIMulticastEnable | 1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.25 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current Indicates how a service instance processes an unknown multicast packet. By default, the service instance is allowed to broadcast the unknown multicast packet. This object applies to the mp2mp service instance only. | ||||
| ChwMinMSIBroadcastEnable | 1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.26 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current Indicates how a service instance processes a broadcast packet. By default, the service instance is allowed to forward the broadcast packet. This object applies to the mp2mp service instance only. | ||||
| ChwMinMSIDescription | 1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.27 | OCTET STRING (SIZE (1..80)) | RC | |
column · OCTET STRING (SIZE (1..80)) · read-create · current Indicates descriptive information of a service instance. Its length ranges from 1 to 80 bytes and the first byte cannot be a space. | ||||
| ChwMinMSIStatisticsEnable | 1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.28 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current Indicates that the traffic statistics is enabled on a service instance. | ||||
| ChwMinMSIStatisticsReset | 1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.29 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current Indicates the reset on traffic statistics of a service instance. | ||||
| ChwMinMSIFcsTransparentEnable | 1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.30 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current The forwarded packets need to carry the CRC mark. By default, the forwarded packets do not carry the CRC mark. | ||||
| ChwMinMSIIngressPriorityValue | 1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.31 | Integer32 | RC | |
column · Integer32 · read-create · current Indicates the source priority of a service instance. It is used to set the I-TAG priority field when packets are encapsulated for transmission on the tunnel. The source priority has eight levels that range from 0 to 7. By default, the source priority is copied to the mac-tunnel. When the source priority is set to 8, it indicates that the service instance is not configured with a priority, and the priority does not exist. | ||||
| ChwMinMSIEgressPriorityTrustBTag | 1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.32 | TruthValue | RC | |
column · TruthValue · read-create · current Indicates that the destination priority of a service instance is copied from the B-TAG priority. It is used to set whether the I-TAG priority is copied from the B-TAG priority when packets reach the end of the tunnel and are decapsulated. By default, the B-TAG priority is not copied to I-TAG. | ||||
| ChwMinMSIIngressDeiValue | 1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.33 | Integer32 | RC | |
column · Integer32 · read-create · current Indicates the source DEI of a service instance. It is used to set the DEI field when packets are encapsulated for transmission on the tunnel. When DEI is true, the value is set to 1. When DEI is false, the value is set to 0. By default, the S-DEI priority is copied to the mac-tunnel. When the value of the DEI is set to 2, it indicates that no DEI is configured on the tunnel. | ||||
| ChwMinMSIEgressDeiTrustBDei | 1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.34 | TruthValue | RC | |
column · TruthValue · read-create · current Indicates that the destination DEI of a service instance is copied from the B-DEI priority. It is used to set whether the DEI of I-TAG is coped from B-DEI when packets reach the end of the tunnel and are decpasulated. By default, B-DEI is not copied to I-TAG. | ||||
| ChwMinMSIIsolateAll | 1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.35 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current Indicates that all the mapping users of a service instance are isolated. By default, the isolation is disabled. This object applies to the service instance of mp2mp only. It is invalid in the service type of p2p. | ||||
| ChwMinMSIRowStatus | 1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.51 | RowStatus | RC | |
column · RowStatus · read-create · current Indicates the RowStatus. The following three actions are used: active, createAndGo, destroy | ||||
| ThwMinMSIMappingTable | 1.3.6.1.4.1.2011.5.25.133.1.1.3.3 | NA | ||
table · not-accessible · current Indicates the configuration table of a service instance user. | ||||
| RhwMinMSIMappingEntry | 1.3.6.1.4.1.2011.5.25.133.1.1.3.3.1 | NA | ||
row · not-accessible · current Indicates the configuration table entry of a service instance user. | ||||
| ChwMinMSIMappingIfIndex | 1.3.6.1.4.1.2011.5.25.133.1.1.3.3.1.1 | InterfaceIndexOrZero | NA | |
column · InterfaceIndexOrZero · not-accessible · current The port that is mapped to the current service instance. If the value is 0, it means that port mapping is not supported. | ||||
| ChwMinMSIMappingVlanPriority | 1.3.6.1.4.1.2011.5.25.133.1.1.3.3.1.2 | Integer32 (0..8) | NA | |
column · Integer32 (0..8) · not-accessible · current The priority of a user's packets that are mapped to the current service instance. If the value is 8, it means that the priority mapping is not supported. | ||||
| ChwMinMSIMappingGlobalVlanID | 1.3.6.1.4.1.2011.5.25.133.1.1.3.3.1.3 | VlanIdOrNone | NA | |
column · VlanIdOrNone · not-accessible · current The global VLAN ID that is mapped to the current service instance. If the value is 0, it means that the global VLAN mapping is not supported. | ||||
| ChwMinMSIMappingVlanListLow | 1.3.6.1.4.1.2011.5.25.133.1.1.3.3.1.11 | VlanList (SIZE (256)) | RC | |
column · VlanList (SIZE (256)) · read-create · current Indicates the VLAN ID starting value of a service instance user. | ||||
| ChwMinMSIMappingVlanListHigh | 1.3.6.1.4.1.2011.5.25.133.1.1.3.3.1.12 | VlanList (SIZE (256)) | RC | |
column · VlanList (SIZE (256)) · read-create · current Indicates the VLAN ID ending value of a service instance user. | ||||
| ChwMinMSIMappingUserIsolate | 1.3.6.1.4.1.2011.5.25.133.1.1.3.3.1.13 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current Indicates that the specified mapping user of a service instance is isolated. By default, the isolation is enabled. This object applies to the service instance of mp2mp only. It is invalid in the service type of p2p | ||||
| ChwMinMSIMappingRowStatus | 1.3.6.1.4.1.2011.5.25.133.1.1.3.3.1.51 | RowStatus | RC | |
column · RowStatus · read-create · current Indicates the RowStatus. The following three actions are used: active, createAndGo, destroy | ||||
| ThwMinMSIBindMacTnlTable | 1.3.6.1.4.1.2011.5.25.133.1.1.3.4 | NA | ||
table · not-accessible · current Indicates the mac-tunnel table bound with a service instance. | ||||
| RhwMinMSIBindMacTnlEntry | 1.3.6.1.4.1.2011.5.25.133.1.1.3.4.1 | NA | ||
row · not-accessible · current Indicates the mac-tunnel table entry bound with a service instance. | ||||
| ChwMinMSIBindMacTnlIndex | 1.3.6.1.4.1.2011.5.25.133.1.1.3.4.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current Indicates the index of Mac Tunnel. It begins with one. | ||||
| ChwMinMSIBindMacTnlRowStatus | 1.3.6.1.4.1.2011.5.25.133.1.1.3.4.1.51 | RowStatus | RC | |
column · RowStatus · read-create · current Indicates the RowStatus. The following three actions are used: active, createAndGo, destroy | ||||
| ThwMinMSIStatisticsTable | 1.3.6.1.4.1.2011.5.25.133.1.1.3.5 | NA | ||
table · not-accessible · current Indicates the hwMinMSIStatisticsTable of a service instance. | ||||
| RhwMinMSIStatisticsEntry | 1.3.6.1.4.1.2011.5.25.133.1.1.3.5.1 | NA | ||
row · not-accessible · current Indicates the hwMinMSIStatisticsTable entry of a service instance.
| ||||
| ChwMinMSIInPackets | 1.3.6.1.4.1.2011.5.25.133.1.1.3.5.1.11 | Counter64 | RO | |
column · Counter64 · read-only · current Indicates the number of packets received by a user of the current service instance. | ||||
| ChwMinMSIInBytes | 1.3.6.1.4.1.2011.5.25.133.1.1.3.5.1.12 | Counter64 | RO | |
column · Counter64 · read-only · current Indicates the number of bytes received by a user of the current service instance. | ||||
| ChwMinMSIOutPackets | 1.3.6.1.4.1.2011.5.25.133.1.1.3.5.1.13 | Counter64 | RO | |
column · Counter64 · read-only · current Indicates the number of packets sent by a user of the current service instance. | ||||
| ChwMinMSIOutBytes | 1.3.6.1.4.1.2011.5.25.133.1.1.3.5.1.14 | Counter64 | RO | |
column · Counter64 · read-only · current Indicates the number of bytes sent by a user of the current service instance. | ||||
| ThwMinMSIStaticMacFwdTable | 1.3.6.1.4.1.2011.5.25.133.1.1.3.6 | NA | ||
table · not-accessible · current Indicates the static MAC forwarding table of a service instance: | ||||
| RhwMinMSIStaticMacFwdEntry | 1.3.6.1.4.1.2011.5.25.133.1.1.3.6.1 | NA | ||
row · not-accessible · current Indicates the static MAC forwarding table entry of a service instance: | ||||
| ChwMinMSIStaticMacFwdCDMac | 1.3.6.1.4.1.2011.5.25.133.1.1.3.6.1.1 | MacAddress | NA | |
column · MacAddress · not-accessible · current Indicates the destination MAC address of a customer. | ||||
| ChwMinMSIStaticMacFwdMacTnlName | 1.3.6.1.4.1.2011.5.25.133.1.1.3.6.1.11 | OCTET STRING (SIZE (1..31)) | RC | |
column · OCTET STRING (SIZE (1..31)) · read-create · current Indicates the name of the mac-tunnel. It is a character string with a maximum of 31 bytes and a minimum of 1 byte. | ||||
| ChwMinMSIStaticMacFwdOutgoingIfIndex | 1.3.6.1.4.1.2011.5.25.133.1.1.3.6.1.12 | InterfaceIndexOrZero | RC | |
column · InterfaceIndexOrZero · read-create · current Indicates a outbound port. The value zero is used to indicate that interface was unknown or none. | ||||
| ChwMinMSIStaticMacFwdVlanID | 1.3.6.1.4.1.2011.5.25.133.1.1.3.6.1.13 | VlanIdOrNone | RC | |
column · VlanIdOrNone · read-create · current Indicates the downstream vlanid. The special value of zero is used to indicate that no VLAN-ID is present or used. | ||||
| ChwMinMSIStaticMacFwdType | 1.3.6.1.4.1.2011.5.25.133.1.1.3.6.1.14 | HWStaticMacFwdType | RC | |
column · HWStaticMacFwdType · read-create · current Indicates the type of the static MAC forwarding table of a service instance: static(1): indicates a static entry. blackhole(2): indicates a blackhole entry. | ||||
| ChwMinMSIStaticMacFwdRowStatus | 1.3.6.1.4.1.2011.5.25.133.1.1.3.6.1.51 | RowStatus | RC | |
column · RowStatus · read-create · current Indicates the RowStatus. The following three actions are used: active, createAndGo, destroy. | ||||
| ThwSINameToIndexMappingTable | 1.3.6.1.4.1.2011.5.25.133.1.1.3.7 | NA | ||
table · not-accessible · current Indicates the name and the index mapping table of a service instance. | ||||
| RhwSINameToIndexMappingEntry | 1.3.6.1.4.1.2011.5.25.133.1.1.3.7.1 | NA | ||
row · not-accessible · current Indicates the name and the index mapping table entry of a service instance.
| ||||
| ChwSIName | 1.3.6.1.4.1.2011.5.25.133.1.1.3.7.1.1 | OCTET STRING (SIZE (1..31)) | NA | |
column · OCTET STRING (SIZE (1..31)) · not-accessible · current Indicates the name of a service instance. It is a character string with a maximum of 31 bytes and a minimum of 1 byte. | ||||
| ChwSIIndex | 1.3.6.1.4.1.2011.5.25.133.1.1.3.7.1.11 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Indicates the index of a service instance.It begins with one. | ||||
| NhwMinMNotifications | 1.3.6.1.4.1.2011.5.25.133.1.2 | |||
| !hwMinMMacTnlUp | 1.3.6.1.4.1.2011.5.25.133.1.2.1 | |||
notification · current Indicates the Up alarm of the mac-tunnel. This object forms a pair with the following hwMinMMacTnlDown. | ||||
| !hwMinMMacTnlDown | 1.3.6.1.4.1.2011.5.25.133.1.2.2 | |||
notification · current Indicates the Down alarm of the mac-tunnel. This object forms a pair with the previous hwMinMMacTnlUp. | ||||
| !hwMinMSIUp | 1.3.6.1.4.1.2011.5.25.133.1.2.3 | |||
notification · current Indicates the Up alarm of a service instance. This object forms a pair with the following hwMinMSIDown. | ||||
| !hwMinMSIDown | 1.3.6.1.4.1.2011.5.25.133.1.2.4 | |||
notification · current Indicates the Down alarm of a service instance. This object forms a pair with the previous hwMinMSIUp. | ||||
| !hwMinMMacTnlCCFaultAlarm | 1.3.6.1.4.1.2011.5.25.133.1.2.5 | |||
notification · current Indicates an alarm on the connectivity of fault. | ||||
| !hwMinMMacTnlSwitch | 1.3.6.1.4.1.2011.5.25.133.1.2.6 | |||
notification · current Indicates the Aps protection group switchover alarm of the mac-tunnel. This object forms a pair with the following hwMinMMacTnlRevertive. hwMinMMacTnlName: indicates the name of the primary tunnel. hwMinMMacTnlDMac: indicates the destination MAC address of the primary tunnel. hwMinMMacTnlBVlanID: indicates the BVLANID of the primary tunnel. hwMinMProtectMacTnlName: Indicates the name of the backup tunnel. hwMinMProtectSwitchOperation: Indicates the switchover commands for the Aps protection group of mac-tunnels. hwMinMProtectMacTnlBVlanID: indicates the BVLANID of the backup tunnel. hwMinMProtectMacTnlDMac:indicates the destination MAC address of the backup tunnel. | ||||
| !hwMinMMacTnlRevertive | 1.3.6.1.4.1.2011.5.25.133.1.2.7 | |||
notification · current Indicates the Aps protection group switchover alarm of the mac-tunnel. This object forms a pair with the previous hwMinMMacTnlSwitch. hwMinMMacTnlName: indicates the name of the primary tunnel. hwMinMMacTnlDMac: indicates the destination MAC address of the primary tunnel. hwMinMMacTnlBVlanID: indicates the BVLANID of the primary tunnel. hwMinMProtectMacTnlName: Indicates the name of the backup tunnel. hwMinMProtectSwitchOperation: Indicates the switchover commands for the Aps protection group of mac-tunnels. hwMinMProtectMacTnlBVlanID: indicates the BVLANID of the backup tunnel. hwMinMProtectMacTnlDMac:indicates the destination MAC address of the backup tunnel. | ||||
| !hwMinMSIMacLimitNumRaisingThreshold | 1.3.6.1.4.1.2011.5.25.133.1.2.8 | |||
notification · current Indicates the alarm of the mac limiting number beyond the Threshold. | ||||
| NhwMinMConformance | 1.3.6.1.4.1.2011.5.25.133.1.3 | |||
| NhwMinMGroups | 1.3.6.1.4.1.2011.5.25.133.1.3.1 | |||
| GhwMinMSystemGroup | 1.3.6.1.4.1.2011.5.25.133.1.3.1.1 | |||
group · current A collection of objects providing the System configuration of the MAC-in-MAC capability. | ||||
| GhwMinMMacTnlCfgGroup | 1.3.6.1.4.1.2011.5.25.133.1.3.1.2 | |||
group · current A collection of objects providing the configuration of the MAC TUNNEL capability.
| ||||
| GhwMinMMacTnlStatisticsGroup | 1.3.6.1.4.1.2011.5.25.133.1.3.1.3 | |||
group · current A collection of objects providing the Statistics of the Service Instance capability. | ||||
| GhwMinMMacTnlOAMGroup | 1.3.6.1.4.1.2011.5.25.133.1.3.1.4 | |||
group · current A collection of objects providing the OAM of the MAC TUNNEL capability.
| ||||
| GhwMinMMacTnlApsGroup | 1.3.6.1.4.1.2011.5.25.133.1.3.1.5 | |||
group · current A collection of objects providing the Aps of the MAC TUNNEL capability.
| ||||
| GhwMinMSICfgGroup | 1.3.6.1.4.1.2011.5.25.133.1.3.1.6 | |||
group · current A collection of objects providing the configuration of Service Instance capability.
| ||||
| GhwMinMSIStatisticsGroup | 1.3.6.1.4.1.2011.5.25.133.1.3.1.7 | |||
group · current A collection of objects providing the Statistics of the Service Instance capability. | ||||
| GhwMinMNotificationGroup | 1.3.6.1.4.1.2011.5.25.133.1.3.1.8 | |||
group · current Collection of notification objects. | ||||
| MhwMinMCompliances | 1.3.6.1.4.1.2011.5.25.133.1.3.2 | |||
compliance · current The compliance statement for entities implementing the Huawei MINM MIB | ||||
Textual conventions
HWAdminStatusINTEGERdown(2)up(1)Indicates the administration status as follows: up(1), down(2)
HWApsIntervalINTEGERapsInterval10ms(3)apsInterval15ms(4)apsInterval20ms(5)apsInterval30ms(6)apsInterval3dot3ms(1)apsInterval5ms(2)Indicates the time interval for fast sending of Aps packets described in the G.8031. By default, it is 3.3 ms. Optional values for sending interval are as follows: apsInterval3dot3ms(1): indicates a sending interval of 3.3 ms. apsInterval5ms(2): indicates a sending interval of 5 ms. apsInterval10ms(3): indicates a sending interval of 10 ms. apsInterval15ms(4): indicates a sending interval of 15 ms. apsInterval20ms(5): indicates a sending interval of 20 ms. apsInterval30ms(6): indicates a sending interval of 30 ms.
HWInterfaceTypeINTEGERbundling(3)oneToOne(2)transparent(1)Indicates the interface type of a service instance. The encApsulation mapping modes of the service instance can be configured as follows: transparent(1): indicates the transparent transmission mode. oneToOne(2): indicates the one-to-one in the s-tagged mode. bundling(3): indicates the bundling in the s-tagged mode. By default, the s-tagged bundling mode is used.
HWOperStatusINTEGERdown(2)up(1)Indicates the operation status as follows: up(1), down(2)
HWProcessBehaviorINTEGERdiscard(1)forward(2)Indicates the processing behavior of packets as follows: discard(1), forward(2)
HWProtectModeINTEGERonePlusOneBidirectional(1)onePlusOneUnidirectional(2)oneToOne(3)Indicates the protection modes of the G.8031 Aps protection group of mac-tunnels. oneplusonebidirectional(1): 1 + 1 switchover protection modes on both ends oneplusoneunidirectional(2): 1 + 1 switchover protection modes on a single end onetoone(3): 1:1 protection mode By the default, the 1:1 protection mode is used.
HWProtectProtocolINTEGERprotocolAps(1)protocolOam(2)Indicates the protection protocol of the protection group of mac-tunnels. protocolAps(1): use an APS protocol to enhance the protection switching. protocolOam(2): not using any APS protocol to enhance the protection switching. By the default, the Protocol OAM is used.
HWServiceTypeINTEGERmp2mp(2)p2p(1)Indicates the type of a service instance as follows: p2p(1): indicates the type of a point-to-point service instance. mp2mp(2): indicates the type of a multi-point to multi-point service instance. By default, the service type is mp2mp.
HWStaticMacFwdTypeINTEGERblackhole(2)static(1)Indicates the type of the static MAC forwarding table of a service instance: static(1): indicates a static entry. blackhole(2): indicates a blackhole entry.
HWSwitchOperationINTEGERclear(1)force(3)lock(2)manual(4)null(5)Indicates the switchover commands for the Aps protection group of mac-tunnels. The priority levels in a descending order are: clear, lock, force and manual. clear(1): clears the lock, force and manual commands, and WTR state on the local end. After the local commands are cleared, the WTR state cannot be entered. lock(2): locks the services on the working tunnel. force(3): forcibly switches the services to the protection tunnel when the protection tunnel is in sound state. manual(4): forcibly switches the services to the protection channel when the working and the protection tunnel are in sound state. null(5):there is not manual commands.
HwDot1agCfmCcmIntervalINTEGERinterval100ms(4)interval10min(8)interval10ms(3)interval10s(6)interval1min(7)interval1s(5)interval20ms(9)interval300Hz(2)interval30ms(10)interval50ms(11)intervalInvalid(1)Indicates the interval at which CCMs are sent by a MEP. The possible values are: intervalInvalid(1) No CCMs are sent (disabled). interval300Hz(2) CCMs are sent every 3 1/3 milliseconds (300Hz). interval10ms(3) CCMs are sent every 10 milliseconds. interval100ms(4) CCMs are sent every 100 milliseconds. interval1s(5) CCMs are sent every 1 second. interval10s(6) CCMs are sent every 10 seconds. interval1min(7) CCMs are sent every minute. interval10min(8) CCMs are sent every 10 minutes. interval20ms(9) CCMs are sent every 10 milliseconds. interval30ms(10) CCMs are sent every 10 milliseconds. interval50ms(11) CCMs are sent every 10 milliseconds. Note: enumerations start at zero to match the 'CCM Interval field' protocol field.HwDot1agCfmEgressActionFieldValueINTEGERegrBlocked(3)egrDown(2)egrOK(1)egrVid(4)Possible values returned in the egress action field
HwDot1agCfmIngressActionFieldValueINTEGERingBlocked(3)ingDown(2)ingOk(1)ingVid(4)Possible values returned in the ingress action field.
HwDot1agCfmMepIdOrZeroUnsigned32 (0 | 1..8191)Display hint:
dIndicates the Maintenance association End Point Identifier (MEPID): A small integer, unique over a given Maintenance Association, identifying a specific MEP. The special value 0 is allowed to indicate special cases, for example that no MEPID is configured in a given Maintenance Association point. Whenever an object is defined with this SYNTAX, then the DESCRIPTION clause of such an object MUST specify what the special value of 0 means.
HwDot1agCfmRelayActionFieldValueINTEGERrlyFdb(2)rlyHit(1)rlyMpdb(3)Indicates the possible values the Relay action field can take.
HwLldpChassisIdOCTET STRING (SIZE (1..255))This TC describes the format of a chassis identifier string. Objects of this type are always used with an associated LldpChassisIdSubtype object, which identifies the format of the particular LldpChassisId object instance. If the associated LldpChassisIdSubtype object has a value of 'chassisComponent(1)', then the octet string identifies a particular instance of the entPhysicalAlias object (defined in IETF RFC 2737) for a chassis component (i.e., an entPhysicalClass value of 'chassis(3)'). If the associated LldpChassisIdSubtype object has a value of 'interfaceAlias(2)', then the octet string identifies a particular instance of the ifAlias object (defined in IETF RFC 2863) for an interface on the containing chassis. If the particular ifAlias object does not contain any values, another chassis identifier type should be used. If the associated LldpChassisIdSubtype object has a value of 'portComponent(3)', then the octet string identifies a particular instance of the entPhysicalAlias object (defined in IETF RFC 2737) for a port or backplane component within the containing chassis. If the associated LldpChassisIdSubtype object has a value of 'macAddress(4)', then this string identifies a particular unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order), of a port on the containing chassis as defined in IEEE Std 802-2001. If the associated LldpChassisIdSubtype object has a value of 'networkAddress(5)', then this string identifies a particular network address, encoded in network byte order, associated with one or more ports on the containing chassis. The first octet contains the IANA Address Family Numbers enumeration value for the specific address type, and octets 2 through N contain the network address value in network byte order. If the associated LldpChassisIdSubtype object has a value of 'interfaceName(6)', then the octet string identifies a particular instance of the ifName object (defined in IETF RFC 2863) for an interface on the containing chassis. If the particular ifName object does not contain any values, another chassis identifier type should be used. If the associated LldpChassisIdSubtype object has a value of 'local(7)', then this string identifies a locally assigned Chassis ID.
HwLldpChassisIdSubtypeINTEGERchassisComponent(1)interfaceAlias(2)interfaceName(6)local(7)macAddress(4)networkAddress(5)portComponent(3)This TC describes the source of a chassis identifier. The enumeration 'chassisComponent(1)' represents a chassis identifier based on the value of entPhysicalAlias object (defined in IETF RFC 2737) for a chassis component (i.e., an entPhysicalClass value of 'chassis(3)'). The enumeration 'interfaceAlias(2)' represents a chassis identifier based on the value of ifAlias object (defined in IETF RFC 2863) for an interface on the containing chassis. The enumeration 'portComponent(3)' represents a chassis identifier based on the value of entPhysicalAlias object (defined in IETF RFC 2737) for a port or backplane component (i.e., entPhysicalClass value of 'port(10)' or 'backplane(4)'), within the containing chassis. The enumeration 'macAddress(4)' represents a chassis identifier based on the value of a unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order), of a port on the containing chassis as defined in IEEE Std 802-2001. The enumeration 'networkAddress(5)' represents a chassis identifier based on a network address, associated with a particular chassis. The encoded address is actually composed of two fields. The first field is a single octet, representing the IANA AddressFamilyNumbers value for the specific address type, and the second field is the network address value. The enumeration 'interfaceName(6)' represents a chassis identifier based on the value of ifName object (defined in IETF RFC 2863) for an interface on the containing chassis. The enumeration 'local(7)' represents a chassis identifier based on a locally defined value.
HwLldpManAddrIfSubtypeINTEGERifIndex(2)systemPortNumber(3)unknown(1)This TC describes the basis of a particular type of interface associated with the management address. The enumeration 'unknown(1)' represents the case where the interface is not known. The enumeration 'ifIndex(2)' represents interface identifier based on the ifIndex MIB object. The enumeration 'systemPortNumber(3)' represents interface identifier based on the system port numbering convention.
HwLldpManAddressOCTET STRING (SIZE (1..31))The value of a management address associated with the LLDP agent that may be used to reach higher layer entities to assist discovery by network management. It should be noted that appropriate security credentials, such as SNMP engineId, may be required to access the LLDP agent using a management address. These necessary credentials should be known by the network management and the objects associated with the credentials are not included in the LLDP agent.
HwLldpPortIdOCTET STRING (SIZE (1..255))This TC describes the format of a port identifier string. Objects of this type are always used with an associated LldpPortIdSubtype object, which identifies the format of the particular LldpPortId object instance. If the associated LldpPortIdSubtype object has a value of 'interfaceAlias(1)', then the octet string identifies a particular instance of the ifAlias object (defined in IETF RFC 2863). If the particular ifAlias object does not contain any values, another port identifier type should be used. If the associated LldpPortIdSubtype object has a value of 'portComponent(2)', then the octet string identifies a particular instance of the entPhysicalAlias object (defined in IETF RFC 2737) for a port or backplane component. If the associated LldpPortIdSubtype object has a value of 'macAddress(3)', then this string identifies a particular unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order) associated with the port (IEEE Std 802-2001). If the associated LldpPortIdSubtype object has a value of 'networkAddress(4)', then this string identifies a network address associated with the port. The first octet contains the IANA AddressFamilyNumbers enumeration value for the specific address type, and octets 2 through N contain the networkAddress address value in network byte order. If the associated LldpPortIdSubtype object has a value of 'interfaceName(5)', then the octet string identifies a particular instance of the ifName object (defined in IETF RFC 2863). If the particular ifName object does not contain any values, another port identifier type should be used. If the associated LldpPortIdSubtype object has a value of 'agentCircuitId(6)', then this string identifies a agent-local identifier of the circuit (defined in RFC 3046). If the associated LldpPortIdSubtype object has a value of 'local(7)', then this string identifies a locally assigned port ID.
HwLldpPortIdSubtypeINTEGERagentCircuitId(6)interfaceAlias(1)interfaceName(5)local(7)macAddress(3)networkAddress(4)portComponent(2)This TC describes the source of a particular type of port identifier used in the LLDP MIB. The enumeration 'interfaceAlias(1)' represents a port identifier based on the ifAlias MIB object, defined in IETF RFC 2863. The enumeration 'portComponent(2)' represents a port identifier based on the value of entPhysicalAlias (defined in IETF RFC 2737) for a port component (i.e., entPhysicalClass value of 'port(10)'), within the containing chassis. The enumeration 'macAddress(3)' represents a port identifier based on a unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order), which has been detected by the agent and associated with a particular port (IEEE Std 802-2001). The enumeration 'networkAddress(4)' represents a port identifier based on a network address, detected by the agent and associated with a particular port. The enumeration 'interfaceName(5)' represents a port identifier based on the ifName MIB object, defined in IETF RFC 2863. The enumeration 'agentCircuitId(6)' represents a port identifier based on the agent-local identifier of the circuit (defined in RFC 3046), detected by the agent and associated with a particular port. The enumeration 'local(7)' represents a port identifier based on a value locally assigned.
Traps / Notifications
- hwMinMMacTnlCCFaultAlarm
1.3.6.1.4.1.2011.5.25.133.1.2.5 - hwMinMMacTnlDown
1.3.6.1.4.1.2011.5.25.133.1.2.2 - hwMinMMacTnlRevertive
1.3.6.1.4.1.2011.5.25.133.1.2.7 - hwMinMMacTnlSwitch
1.3.6.1.4.1.2011.5.25.133.1.2.6 - hwMinMMacTnlUp
1.3.6.1.4.1.2011.5.25.133.1.2.1 - hwMinMSIDown
1.3.6.1.4.1.2011.5.25.133.1.2.4 - hwMinMSIMacLimitNumRaisingThreshold
1.3.6.1.4.1.2011.5.25.133.1.2.8 - hwMinMSIUp
1.3.6.1.4.1.2011.5.25.133.1.2.3