HUAWEI-IPFPM-MIB
HUAWEI Technology Co.,LtdThe mib is used for configuring the IPFPM.
snmptranslate -m HUAWEI-IPFPM-MIB -Tpsnmpwalk -v2c -c <community> -m HUAWEI-IPFPM-MIB <host> 1.3.6.1.4.1.2011.5.25.316Imports
| HUAWEI-MIB | hwDatacomm |
|---|---|
| IF-MIB | InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IhwIpfpmMib | 1.3.6.1.4.1.2011.5.25.316 | |||
identity The mib is used for configuring the IPFPM. | ||||
| NhwIpfpmMcpObjects | 1.3.6.1.4.1.2011.5.25.316.1 | |||
| NhwIpfpmMcpConfiguration | 1.3.6.1.4.1.2011.5.25.316.1.1 | |||
| NhwIpfpmMcpGlobalTable | 1.3.6.1.4.1.2011.5.25.316.1.1.1 | |||
| ShwIpfpmMcpEnable | 1.3.6.1.4.1.2011.5.25.316.1.1.1.1 | HWEnabledStatus | RW | |
scalar · HWEnabledStatus · read-write · current This object indicates that the MCP (Measurement Control Point) function is 'enabled(1)' or 'disabled(2)'. | ||||
| ShwIpfpmMcpId | 1.3.6.1.4.1.2011.5.25.316.1.1.1.2 | IpAddress | RW | |
scalar · IpAddress · read-write · current The value of this object indicates the identification of MCP. The value 0.0.0.0 represents that it is not configured. | ||||
| ShwIpfpmMcpUdpPort | 1.3.6.1.4.1.2011.5.25.316.1.1.1.3 | Integer32 (1024..65535) | RW | |
scalar · Integer32 (1024..65535) · read-write · current The value of this object indicates the port that MCP listens on as the server. | ||||
| ThwIpfpmMcpAuthTable | 1.3.6.1.4.1.2011.5.25.316.1.1.4 | NA | ||
table · not-accessible · current IPFPM authenticaiton configuration information. The index of this table is hwIpfpmMcpAuthKeyId. | ||||
| RhwIpfpmMcpAuthEntry | 1.3.6.1.4.1.2011.5.25.316.1.1.4.1 | NA | ||
row · not-accessible · current IPFPM authenticaiton configuration information. The index of this entry is hwIpfpmMcpAuthKeyId.
| ||||
| ChwIpfpmMcpAuthKeyId | 1.3.6.1.4.1.2011.5.25.316.1.1.4.1.1 | Integer32 (1..64) | NA | |
column · Integer32 (1..64) · not-accessible · current Identification of the authentication key. | ||||
| ChwIpfpmMcpAuthType | 1.3.6.1.4.1.2011.5.25.316.1.1.4.1.2 | HWIpfpmAuthType | RC | |
column · HWIpfpmAuthType · read-create · current Authentication type of the key. The enumeration 'hmac-sha256(1)' represents the password is sent after being encrypted through hmac-sha256. By default, authentication is not configured. | ||||
| ChwIpfpmMcpAuthKey | 1.3.6.1.4.1.2011.5.25.316.1.1.4.1.3 | OCTET STRING (SIZE (0..432)) | RC | |
column · OCTET STRING (SIZE (0..432)) · read-create · current The password used as an IPFPM authentication key. | ||||
| ChwIpfpmMcpAuthRowStatus | 1.3.6.1.4.1.2011.5.25.316.1.1.4.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current Used for controlling the creation and deletion of this row. | ||||
| ThwIpfpmMcpInstTable | 1.3.6.1.4.1.2011.5.25.316.1.1.5 | NA | ||
table · not-accessible · current IPFPM configuration information for a particular MCP test instance.The index of this table is hwIpfpmMcpInstId. | ||||
| RhwIpfpmMcpInstEntry | 1.3.6.1.4.1.2011.5.25.316.1.1.5.1 | NA | ||
row · not-accessible · current IPFPM configuration information for a particular MCP test instance.The index of this entry is hwIpfpmMcpInstId.
| ||||
| ChwIpfpmMcpInstId | 1.3.6.1.4.1.2011.5.25.316.1.1.5.1.1 | Integer32 (1..8355838 | 16711681..16777214) | NA | |
column · Integer32 (1..8355838 | 16711681..16777214) · not-accessible · current Identification of the test instance. | ||||
| ChwIpfpmMcpInstDesc | 1.3.6.1.4.1.2011.5.25.316.1.1.5.1.2 | OCTET STRING (SIZE (0..64)) | RC | |
column · OCTET STRING (SIZE (0..64)) · read-create · current This object indicates the IP FPM instance description on an MCP. if the string length is 0, it represents that it is not configured. | ||||
| ChwIpfpmMcpLossRatioUpThres | 1.3.6.1.4.1.2011.5.25.316.1.1.5.1.3 | Integer32 (0..100000000) | RC | |
column · Integer32 (0..100000000) · read-create · current This value divided by 1000000 is the upper threshold of loss ratio(%) for alarm. The value 0 represents that it is not configured, and the alarm is not enabled. | ||||
| ChwIpfpmMcpLossRatioLowThres | 1.3.6.1.4.1.2011.5.25.316.1.1.5.1.4 | Integer32 (0..100000000) | RC | |
column · Integer32 (0..100000000) · read-create · current This value divided by 1000000 is the lower threshold of loss ratio(%) for alarm recovery. The value 0 represents that it is not configured, and the alarm is not enabled. | ||||
| ChwIpfpmMcpOneDelayUpThres | 1.3.6.1.4.1.2011.5.25.316.1.1.5.1.5 | Integer32 (0..2147483647) | RC | |
column · Integer32 (0..2147483647) · read-create · current Upper threshold of one-way delay(microsecond) for alarm. The value 0 represents that it is not configured, and the alarm is not enabled. | ||||
| ChwIpfpmMcpOneDelayLowThres | 1.3.6.1.4.1.2011.5.25.316.1.1.5.1.6 | Integer32 (0..2147483647) | RC | |
column · Integer32 (0..2147483647) · read-create · current Lower threshold of one-way delay(microsecond) for alarm recovery. The value 0 represents that it is not configured, and the alarm is not enabled. | ||||
| ChwIpfpmMcpTwoDelayUpThres | 1.3.6.1.4.1.2011.5.25.316.1.1.5.1.7 | Integer32 (0..2147483647) | RC | |
column · Integer32 (0..2147483647) · read-create · current Upper threshold of two-way delay(microsecond) for alarm. The value 0 represents that it is not configured, and the alarm is not enabled. | ||||
| ChwIpfpmMcpTwoDelayLowThres | 1.3.6.1.4.1.2011.5.25.316.1.1.5.1.8 | Integer32 (0..2147483647) | RC | |
column · Integer32 (0..2147483647) · read-create · current Lower threshold of two-way delay(microsecond) for alarm recovery. The value 0 represents that it is not configured, and the alarm is not enabled. | ||||
| ChwIpfpmMcpMeasureEnable | 1.3.6.1.4.1.2011.5.25.316.1.1.5.1.9 | HWEnabledStatus | RC | |
column · HWEnabledStatus · read-create · current This object indicates that the MCP instance measure function is 'enabled(1)' or 'disabled(2)'. | ||||
| ChwIpfpmMcpInstRowStatus | 1.3.6.1.4.1.2011.5.25.316.1.1.5.1.10 | RowStatus | RC | |
column · RowStatus · read-create · current Used for controlling the creation and deletion of this row. | ||||
| ChwIpfpmMcpInstType | 1.3.6.1.4.1.2011.5.25.316.1.1.5.1.11 | HWIpfpmInstType | RC | |
column · HWIpfpmInstType · read-create · current This object indicates that the MCP instance type. 'unicast(0)' means unicast measurement instance. 'multicastsrc(1)' means multicast measurement source instance. 'multicastrecv(2)' means multicast measurement receiver instance. | ||||
| ChwIpfpmMcpSourceInstId | 1.3.6.1.4.1.2011.5.25.316.1.1.5.1.12 | Integer32 (0 | 16711681..16777214) | RC | |
column · Integer32 (0 | 16711681..16777214) · read-create · current This object indicates the source instance of multicastrecv. This object is only valid when hwIpfpmMcpInstType is 'multicastrecv(2)'. We can ingore this object value when hwIpfpmMcpInstType is not 'multicastrecv(2)'. | ||||
| ThwIpfpmMcpDcpTable | 1.3.6.1.4.1.2011.5.25.316.1.1.6 | NA | ||
table · not-accessible · current IPFPM DCPs information for a particular MCP test instance. The indexes of this table are hwIpfpmMcpInstId and hwIpfpmMcpDcpId. | ||||
| RhwIpfpmMcpDcpEntry | 1.3.6.1.4.1.2011.5.25.316.1.1.6.1 | NA | ||
row · not-accessible · current IPFPM DCPs information for a particular MCP test instance. The indexes of this entry are hwIpfpmMcpInstId and hwIpfpmMcpDcpId. | ||||
| ChwIpfpmMcpDcpId | 1.3.6.1.4.1.2011.5.25.316.1.1.6.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current Identification of DCP which belongs to the test instance. | ||||
| ChwIpfpmMcpDcpRowStatus | 1.3.6.1.4.1.2011.5.25.316.1.1.6.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current Used for controlling the creation and deletion of this row. | ||||
| ThwIpfpmMcpAchTable | 1.3.6.1.4.1.2011.5.25.316.1.1.7 | NA | ||
table · not-accessible · current IPFPM ACHs(Atomic Closed Hop) information for a particular MCP test instance.The indexes of this table are hwIpfpmMcpInstId and hwIpfpmMcpAchId. | ||||
| RhwIpfpmMcpAchEntry | 1.3.6.1.4.1.2011.5.25.316.1.1.7.1 | NA | ||
row · not-accessible · current IPFPM ACHs(Atomic Closed Hop) information for a particular MCP test instance.The indexes of this entry are hwIpfpmMcpInstId and hwIpfpmMcpAchId. | ||||
| ChwIpfpmMcpAchId | 1.3.6.1.4.1.2011.5.25.316.1.1.7.1.1 | Integer32 (0..2147483647) | NA | |
column · Integer32 (0..2147483647) · not-accessible · current The object indicates the identification of the ACH. | ||||
| ChwIpfpmMcpFlowType | 1.3.6.1.4.1.2011.5.25.316.1.1.7.1.2 | HWIpfpmMcpFlowType | RC | |
column · HWIpfpmMcpFlowType · read-create · current The object indicates the flow that the ACH monitors is 'forward(1)' or 'backward(2)', 'bidirectional(3)'. The value none(0) represents that it is not configured. | ||||
| ChwIpfpmMcpAchRowStatus | 1.3.6.1.4.1.2011.5.25.316.1.1.7.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current Used for controlling the creation and deletion of this row. | ||||
| ThwIpfpmMcpTlpTable | 1.3.6.1.4.1.2011.5.25.316.1.1.8 | NA | ||
table · not-accessible · current IPFPM TLPs(Target Logical Port) information for a particular MCP ACH.The indexes of this table are hwIpfpmMcpInstId and hwIpfpmMcpAchId and hwIpfpmMcpTlpRole and hwIpfpmMcpTlpDcpId and hwIpfpmMcpTlpId. | ||||
| RhwIpfpmMcpTlpEntry | 1.3.6.1.4.1.2011.5.25.316.1.1.8.1 | NA | ||
row · not-accessible · current IPFPM TLPs(Target Logical Port) information for a particular MCP ACH.The indexes of this entry are hwIpfpmMcpInstId and hwIpfpmMcpAchId and hwIpfpmMcpTlpRole and hwIpfpmMcpTlpDcpId and hwIpfpmMcpTlpId. | ||||
| ChwIpfpmMcpTlpRole | 1.3.6.1.4.1.2011.5.25.316.1.1.8.1.1 | HWIpfpmMcpTlpRole | NA | |
column · HWIpfpmMcpTlpRole · not-accessible · current The object indicates the TLP belongs to 'in-group(1)' or 'out-group(2)' of the ACH. | ||||
| ChwIpfpmMcpTlpDcpId | 1.3.6.1.4.1.2011.5.25.316.1.1.8.1.2 | IpAddress | NA | |
column · IpAddress · not-accessible · current The object indicates the dcp which the tlp belongs to. | ||||
| ChwIpfpmMcpTlpId | 1.3.6.1.4.1.2011.5.25.316.1.1.8.1.3 | Integer32 (1..16777215) | NA | |
column · Integer32 (1..16777215) · not-accessible · current The object indicates the identification of the TLP. | ||||
| ChwIpfpmMcpTlpRowStatus | 1.3.6.1.4.1.2011.5.25.316.1.1.8.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current Used for controlling the creation and deletion of this row. | ||||
| ThwIpfpmMcpSrcInstReferQueryTable | 1.3.6.1.4.1.2011.5.25.316.1.1.9 | NA | ||
table · not-accessible · current The information is that the multicast source instance referred by some multicast receiver instances. The index of this table is hwIpfpmMcpInstId. | ||||
| RhwIpfpmMcpSrcInstReferQueryEntry | 1.3.6.1.4.1.2011.5.25.316.1.1.9.1 | NA | ||
row · not-accessible · current The information is that the multicast source instance referred by some multicast receiver instances. The index of this entry is hwIpfpmMcpInstId.
| ||||
| ChwIpfpmMcpSrcInstReferCnt | 1.3.6.1.4.1.2011.5.25.316.1.1.9.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The object indicates the counter that the multicast source instance referred by some multicast receiver instances. | ||||
| NhwIpfpmMcpStatistics | 1.3.6.1.4.1.2011.5.25.316.1.2 | |||
| NhwIpfpmMcpStatisticsTable | 1.3.6.1.4.1.2011.5.25.316.1.2.1 | |||
| ShwIpfpmMcpInstSpec | 1.3.6.1.4.1.2011.5.25.316.1.2.1.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current This object indicates the global instance specification of MCP. | ||||
| ShwIpfpmMcpInstCurNum | 1.3.6.1.4.1.2011.5.25.316.1.2.1.2 | Integer32 | RO | |
scalar · Integer32 · read-only · current This object indicates the current instance number of MCP. | ||||
| ShwIpfpmMcpInstTlpMaxNum | 1.3.6.1.4.1.2011.5.25.316.1.2.1.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current This object indicates the maximum number of all instance TLP can be managed by MCP. For statistical instances of which the statistical period is 1s, the number of used instance-specific TLPs is 10 times the actual number of configured instance-specific TLPs. For statistical instances of which the statistical period is 10s or longer, the number of used instance-specific TLPs is the same as the actual number of configured instance-specific TLPs. -1 means unused of this number | ||||
| ShwIpfpmMcpAchMaxNum | 1.3.6.1.4.1.2011.5.25.316.1.2.1.4 | Integer32 | RO | |
scalar · Integer32 · read-only · current This object indicates the total number of all ACH can be managed by MCP. For statistical instances of which the statistical period is 1s, the number of used instance-specific ACHs is 10 times the actual number of configured instance-specific ACHs. For statistical instances of which the statistical period is 10s or longer, the number of used instance-specific ACHs is the same as the actual number of configured instance-specific ACHs. -1 means unused of this number | ||||
| ThwIpfpmMcpInstAchIndexTable | 1.3.6.1.4.1.2011.5.25.316.1.2.3 | NA | ||
table · not-accessible · current Index of a particular test instance and ACH. The indexes of this table are hwIpfpmMcpInstId and hwIpfpmMcpAchId. | ||||
| RhwIpfpmMcpInstAchIndexEntry | 1.3.6.1.4.1.2011.5.25.316.1.2.3.1 | NA | ||
row · not-accessible · current Index of a particular test instance and ACH. The indexes of this entry are hwIpfpmMcpInstId and hwIpfpmMcpAchId. | ||||
| ChwIpfpmMcpSeqNo | 1.3.6.1.4.1.2011.5.25.316.1.2.3.1.1 | Counter64 | RO | |
column · Counter64 · read-only · current Sequence of a particular test instance and ACH. | ||||
| ThwIpfpmMcpLossStatsTable | 1.3.6.1.4.1.2011.5.25.316.1.2.4 | NA | ||
table · not-accessible · current Loss measure statistics of an interval for a particular test instance.The indexes of this table are hwIpfpmMcpInstId and hwIpfpmMcpAchId and hwIpfpmMcpSeqNoHigh and hwIpfpmMcpSeqNoLow. | ||||
| RhwIpfpmMcpLossStatsEntry | 1.3.6.1.4.1.2011.5.25.316.1.2.4.1 | NA | ||
row · not-accessible · current Loss measure statistics of an interval for a particular test instance.The indexes of this entry are hwIpfpmMcpInstId and hwIpfpmMcpAchId and hwIpfpmMcpSeqNoHigh and hwIpfpmMcpSeqNoLow. | ||||
| ChwIpfpmMcpSeqNoHigh | 1.3.6.1.4.1.2011.5.25.316.1.2.4.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current High 32-bit of the hwIpfpmMcpSeqNo. | ||||
| ChwIpfpmMcpSeqNoLow | 1.3.6.1.4.1.2011.5.25.316.1.2.4.1.2 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current Low 32-bit of the hwIpfpmMcpSeqNo. | ||||
| ChwIpfpmMcpLossErrInfo | 1.3.6.1.4.1.2011.5.25.316.1.2.4.1.3 | HWIpfpmStatErrInfo | RO | |
column · HWIpfpmStatErrInfo · read-only · current The error code to indicate the validity and the invalidation reason of an interval's loss measure statistics. | ||||
| ChwIpfpmMcpForwardLossPkts | 1.3.6.1.4.1.2011.5.25.316.1.2.4.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current The absolute value of loss packets of forward flow measurement. | ||||
| ChwIpfpmMcpForwardLossPktsSign | 1.3.6.1.4.1.2011.5.25.316.1.2.4.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The sign of loss packets of forward flow measurement. 1 means positive number, -1 means negative number. | ||||
| ChwIpfpmMcpForwardLossBytes | 1.3.6.1.4.1.2011.5.25.316.1.2.4.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current The absolute value of loss bytes of forward flow measurement. | ||||
| ChwIpfpmMcpForwardLossBytesSign | 1.3.6.1.4.1.2011.5.25.316.1.2.4.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The sign of loss bytes of forward flow measurement. 1 means positive number, -1 means negative number. | ||||
| ChwIpfpmMcpForwardPkts | 1.3.6.1.4.1.2011.5.25.316.1.2.4.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current The packets of forward flow measurement. | ||||
| ChwIpfpmMcpForwardBytes | 1.3.6.1.4.1.2011.5.25.316.1.2.4.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current The bytes of forward flow measurement. | ||||
| ChwIpfpmMcpForwardLossRatio | 1.3.6.1.4.1.2011.5.25.316.1.2.4.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current This value divided by 1000000 is the loss ratio(%) of forward flow measurement. | ||||
| ChwIpfpmMcpBackwardLossPkts | 1.3.6.1.4.1.2011.5.25.316.1.2.4.1.11 | Counter64 | RO | |
column · Counter64 · read-only · current The absolute value of loss packets of backward flow measurement. | ||||
| ChwIpfpmMcpBackwardLossPktsSign | 1.3.6.1.4.1.2011.5.25.316.1.2.4.1.12 | Integer32 | RO | |
column · Integer32 · read-only · current The sign of loss loss packets of backward flow measurement. 1 means positive number, -1 means negative number. | ||||
| ChwIpfpmMcpBackwardLossBytes | 1.3.6.1.4.1.2011.5.25.316.1.2.4.1.13 | Counter64 | RO | |
column · Counter64 · read-only · current The absolute value of loss bytes of backward flow measurement. | ||||
| ChwIpfpmMcpBackwardLossBytesSign | 1.3.6.1.4.1.2011.5.25.316.1.2.4.1.14 | Integer32 | RO | |
column · Integer32 · read-only · current The sign of loss bytes of backward flow measurement. 1 means positive number, -1 means negative number. | ||||
| ChwIpfpmMcpBackwardPkts | 1.3.6.1.4.1.2011.5.25.316.1.2.4.1.15 | Counter64 | RO | |
column · Counter64 · read-only · current The packets of backward flow measurement. | ||||
| ChwIpfpmMcpBackwardBytes | 1.3.6.1.4.1.2011.5.25.316.1.2.4.1.16 | Counter64 | RO | |
column · Counter64 · read-only · current The bytes of backward flow measurement. | ||||
| ChwIpfpmMcpBackwardLossRatio | 1.3.6.1.4.1.2011.5.25.316.1.2.4.1.17 | Integer32 | RO | |
column · Integer32 · read-only · current This value divided by 1000000 is the loss ratio(%) of backward flow measurement. | ||||
| ChwIpfpmMcpForwardLossMMSType | 1.3.6.1.4.1.2011.5.25.316.1.2.4.1.18 | HWIpfpmMMSType | RO | |
column · HWIpfpmMMSType · read-only · current This value indicate multicastsrc type is 'master(0)' or 'slave(1)'. | ||||
| ChwIpfpmMcpForwardLossMMSSwitch | 1.3.6.1.4.1.2011.5.25.316.1.2.4.1.19 | TruthValue | RO | |
column · TruthValue · read-only · current This value indicate whether multicastsrc switched in this period. | ||||
| ThwIpfpmMcpOneDelayStatTable | 1.3.6.1.4.1.2011.5.25.316.1.2.5 | NA | ||
table · not-accessible · current One-way delay measure statistics of an interval for a particular test instance.The indexes of this table are hwIpfpmMcpInstId and hwIpfpmMcpAchId and hwIpfpmMcpSeqNoHigh and hwIpfpmMcpSeqNoLow. | ||||
| RhwIpfpmMcpOneDelayStatEntry | 1.3.6.1.4.1.2011.5.25.316.1.2.5.1 | NA | ||
row · not-accessible · current One-way delay measure statistics of an interval for a particular test instance.The indexes of this entry are hwIpfpmMcpInstId and hwIpfpmMcpAchId and hwIpfpmMcpSeqNoHigh and hwIpfpmMcpSeqNoLow. | ||||
| ChwIpfpmMcpOneDelayErrInfo | 1.3.6.1.4.1.2011.5.25.316.1.2.5.1.1 | HWIpfpmStatErrInfo | RO | |
column · HWIpfpmStatErrInfo · read-only · current The error code to indicate the validity and the invalidation reason of an interval's one-way delay measure statistics. | ||||
| ChwIpfpmMcpForwardOneDelay | 1.3.6.1.4.1.2011.5.25.316.1.2.5.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The one-way delay(microsecond) of forward flow. | ||||
| ChwIpfpmMcpForwardOneDelayVariation | 1.3.6.1.4.1.2011.5.25.316.1.2.5.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The one-way delay variation(microsecond) of forward flow. | ||||
| ChwIpfpmMcpBackwardOneDelay | 1.3.6.1.4.1.2011.5.25.316.1.2.5.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The one-way delay(microsecond) of backward flow. | ||||
| ChwIpfpmMcpBackwardOneDelayVariation | 1.3.6.1.4.1.2011.5.25.316.1.2.5.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The one-way delay variation(microsecond) of backward flow. | ||||
| ChwIpfpmMcpForwardOneDelayMMSType | 1.3.6.1.4.1.2011.5.25.316.1.2.5.1.6 | HWIpfpmMMSType | RO | |
column · HWIpfpmMMSType · read-only · current This value indicate multicastsrc type is 'master(0)' or 'slave(1)'. | ||||
| ThwIpfpmMcpTwoDelayStatTable | 1.3.6.1.4.1.2011.5.25.316.1.2.6 | NA | ||
table · not-accessible · current Two-way delay measure statistics of an interval for a particular test instance.The indexes of this table are hwIpfpmMcpInstId and hwIpfpmMcpAchId and hwIpfpmMcpSeqNoHigh and hwIpfpmMcpSeqNoLow. | ||||
| RhwIpfpmMcpTwoDelayStatEntry | 1.3.6.1.4.1.2011.5.25.316.1.2.6.1 | NA | ||
row · not-accessible · current Two-way delay measure statistics of an interval for a particular test instance.The indexes of this entry are hwIpfpmMcpInstId and hwIpfpmMcpAchId and hwIpfpmMcpSeqNoHigh and hwIpfpmMcpSeqNoLow. | ||||
| ChwIpfpmMcpTwoDelayErrInfo | 1.3.6.1.4.1.2011.5.25.316.1.2.6.1.1 | HWIpfpmStatErrInfo | RO | |
column · HWIpfpmStatErrInfo · read-only · current The error code to indicate the validity and the invalidation reason of an interval's two-way delay measure statistics. | ||||
| ChwIpfpmMcpTwoDelay | 1.3.6.1.4.1.2011.5.25.316.1.2.6.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The two-way delay(microsecond) of monitored flow. | ||||
| ChwIpfpmMcpTwoDelayVariation | 1.3.6.1.4.1.2011.5.25.316.1.2.6.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The two-way delay variation(microsecond) of monitored flow. | ||||
| ChwIpfpmMcpForwardDelay | 1.3.6.1.4.1.2011.5.25.316.1.2.6.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The forward flow delay(microsecond) in two-way delay measurement. | ||||
| ChwIpfpmMcpForwardDelayVariation | 1.3.6.1.4.1.2011.5.25.316.1.2.6.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The forward flow variation(microsecond) in two-way delay measurement. | ||||
| ChwIpfpmMcpBackwardDelay | 1.3.6.1.4.1.2011.5.25.316.1.2.6.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The backward flow delay(microsecond) in two-way delay measurement. | ||||
| ChwIpfpmMcpBackwardDelayVariation | 1.3.6.1.4.1.2011.5.25.316.1.2.6.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The backward flow variation(microsecond) in two-way delay measurement. | ||||
| ThwIpfpmMcpOneDelayMultiStatTable | 1.3.6.1.4.1.2011.5.25.316.1.2.7 | NA | ||
table · not-accessible · current Multi-in-point one-way delay measure statistics of an interval for a
particular test instance.The indexes of this table are hwIpfpmMcpInstId and
hwIpfpmMcpAchId and hwIpfpmMcpSeqNoHigh and hwIpfpmMcpSeqNoLow and hwIpfpmMcpOneDelayFlowType and hwIpfpmMcpOneDelayMultiSrcDCP and
hwIpfpmMcpOneDelayMultiSrcTLP and hwIpfpmMcpOneDelayMultiDesDCP and hwIpfpmMcpOneDelayMultiDesTLP | ||||
| RhwIpfpmMcpOneDelayMultiStatEntry | 1.3.6.1.4.1.2011.5.25.316.1.2.7.1 | NA | ||
row · not-accessible · current Multi-in-point one-way delay measure statistics of an interval for a
particular test instance.The indexes of this entry are hwIpfpmMcpInstId and
hwIpfpmMcpAchId and hwIpfpmMcpSeqNoHigh and hwIpfpmMcpSeqNoLow and hwIpfpmMcpOneDelayFlowType and hwIpfpmMcpOneDelayMultiSrcDCP and
hwIpfpmMcpOneDelayMultiSrcTLP and hwIpfpmMcpOneDelayMultiDesDCP and hwIpfpmMcpOneDelayMultiDesTLP | ||||
| ChwIpfpmMcpOneDelayFlowType | 1.3.6.1.4.1.2011.5.25.316.1.2.7.1.1 | HWIpfpmMcpFlowType | NA | |
column · HWIpfpmMcpFlowType · not-accessible · current The flow type for multi-in-point one-delay. | ||||
| ChwIpfpmMcpOneDelayMultiSrcDCP | 1.3.6.1.4.1.2011.5.25.316.1.2.7.1.2 | IpAddress | NA | |
column · IpAddress · not-accessible · current The multi-in-point one-way delay source DCP. | ||||
| ChwIpfpmMcpOneDelayMultiSrcTLP | 1.3.6.1.4.1.2011.5.25.316.1.2.7.1.3 | Integer32 | NA | |
column · Integer32 · not-accessible · current The multi-in-point one-way delay source TLP. | ||||
| ChwIpfpmMcpOneDelayMultiDesDCP | 1.3.6.1.4.1.2011.5.25.316.1.2.7.1.4 | IpAddress | NA | |
column · IpAddress · not-accessible · current The multi-in-point one-way delay destination DCP. | ||||
| ChwIpfpmMcpOneDelayMultiDesTLP | 1.3.6.1.4.1.2011.5.25.316.1.2.7.1.5 | Integer32 | NA | |
column · Integer32 · not-accessible · current The multi-in-point one-way delay destination TLP. | ||||
| ChwIpfpmMcpOneDelayMultiErrInfo | 1.3.6.1.4.1.2011.5.25.316.1.2.7.1.6 | HWIpfpmStatErrInfo | RO | |
column · HWIpfpmStatErrInfo · read-only · current The error code to indicate the validity and the invalidation reason of an interval's multi-in-point one-way delay measure statistics. | ||||
| ChwIpfpmMcpOneDelayMulti | 1.3.6.1.4.1.2011.5.25.316.1.2.7.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The multi-in-point one-way delay(microsecond). | ||||
| ChwIpfpmMcpOneDelayMultiVariation | 1.3.6.1.4.1.2011.5.25.316.1.2.7.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current The multi-in-point one-way delay variation(microsecond). | ||||
| ThwIpfpmMcpTwoDelayMultiStatTable | 1.3.6.1.4.1.2011.5.25.316.1.2.8 | NA | ||
table · not-accessible · current Multi-in-point two-way delay measure statistics of an interval for a
particular test instance.The indexes of this table are
hwIpfpmMcpInstId and hwIpfpmMcpAchId and hwIpfpmMcpSeqNoHigh and hwIpfpmMcpSeqNoLow and hwIpfpmMcpForwardDelayMultiSrcDCP and
hwIpfpmMcpForwardDelayMultiSrcTLP and hwIpfpmMcpForwardDelayMultiDesDCP and hwIpfpmMcpForwardDelayMultiDesTLP and
hwIpfpmMcpBackwardDelayMultiSrcDCP and hwIpfpmMcpBackwardDelayMultiSrcTLP and hwIpfpmMcpBackwardDelayMultiDesDCP and hwIpfpmMcpBackwardDelayMultiDesTLP. | ||||
| RhwIpfpmMcpTwoDelayMultiStatEntry | 1.3.6.1.4.1.2011.5.25.316.1.2.8.1 | NA | ||
row · not-accessible · current Multi-in-point two-way delay measure statistics of an interval for a
particular test instance.The indexes of this entry are
hwIpfpmMcpInstId and hwIpfpmMcpAchId and hwIpfpmMcpSeqNoHigh and hwIpfpmMcpSeqNoLow and hwIpfpmMcpForwardDelayMultiSrcDCP and
hwIpfpmMcpForwardDelayMultiSrcTLP and hwIpfpmMcpForwardDelayMultiDesDCP and hwIpfpmMcpForwardDelayMultiDesTLP and
hwIpfpmMcpBackwardDelayMultiSrcDCP and hwIpfpmMcpBackwardDelayMultiSrcTLP and hwIpfpmMcpBackwardDelayMultiDesDCP and hwIpfpmMcpBackwardDelayMultiDesTLP.
| ||||
| ChwIpfpmMcpForwardDelayMultiSrcDCP | 1.3.6.1.4.1.2011.5.25.316.1.2.8.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current The multi-in-point two-way delay source DCP of forward flow. | ||||
| ChwIpfpmMcpForwardDelayMultiSrcTLP | 1.3.6.1.4.1.2011.5.25.316.1.2.8.1.2 | Integer32 | NA | |
column · Integer32 · not-accessible · current The multi-in-point two-way delay source TLP of forward flow. | ||||
| ChwIpfpmMcpForwardDelayMultiDesDCP | 1.3.6.1.4.1.2011.5.25.316.1.2.8.1.3 | IpAddress | NA | |
column · IpAddress · not-accessible · current The multi-in-point two-way delay destination DCP of forward flow. | ||||
| ChwIpfpmMcpForwardDelayMultiDesTLP | 1.3.6.1.4.1.2011.5.25.316.1.2.8.1.4 | Integer32 | NA | |
column · Integer32 · not-accessible · current The multi-in-point two-way delay destination TLP of forward flow. | ||||
| ChwIpfpmMcpBackwardDelayMultiSrcDCP | 1.3.6.1.4.1.2011.5.25.316.1.2.8.1.5 | IpAddress | NA | |
column · IpAddress · not-accessible · current The multi-in-point two-way delay source DCP of backward flow. | ||||
| ChwIpfpmMcpBackwardDelayMultiSrcTLP | 1.3.6.1.4.1.2011.5.25.316.1.2.8.1.6 | Integer32 | NA | |
column · Integer32 · not-accessible · current The multi-in-point two-way delay source TLP of backward flow. | ||||
| ChwIpfpmMcpBackwardDelayMultiDesDCP | 1.3.6.1.4.1.2011.5.25.316.1.2.8.1.7 | IpAddress | NA | |
column · IpAddress · not-accessible · current The multi-in-point two-way delay destination DCP of backward flow. | ||||
| ChwIpfpmMcpBackwardDelayMultiDesTLP | 1.3.6.1.4.1.2011.5.25.316.1.2.8.1.8 | Integer32 | NA | |
column · Integer32 · not-accessible · current The multi-in-point two-way delay destination TLP of backward flow. | ||||
| ChwIpfpmMcpTwoDelayMultiErrInfo | 1.3.6.1.4.1.2011.5.25.316.1.2.8.1.9 | HWIpfpmStatErrInfo | RO | |
column · HWIpfpmStatErrInfo · read-only · current The error code to indicate the validity and the invalidation reason of an interval's multi-in-point two-way delay measure statistics. | ||||
| ChwIpfpmMcpTwoDelayMulti | 1.3.6.1.4.1.2011.5.25.316.1.2.8.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current The multi-in-point two-way delay(microsecond) of monitored flow. | ||||
| ChwIpfpmMcpTwoDelayMultiVariation | 1.3.6.1.4.1.2011.5.25.316.1.2.8.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current The multi-in-point two-way delay variation(microsecond) of monitored flow. | ||||
| ChwIpfpmMcpForwardDelayMulti | 1.3.6.1.4.1.2011.5.25.316.1.2.8.1.12 | Integer32 | RO | |
column · Integer32 · read-only · current The forward flow delay(microsecond) in multi-in-point two-way delay measurement. | ||||
| ChwIpfpmMcpForwardDelayMultiVariation | 1.3.6.1.4.1.2011.5.25.316.1.2.8.1.13 | Integer32 | RO | |
column · Integer32 · read-only · current The forward flow variation(microsecond) in multi-in-point two-way delay measurement. | ||||
| ChwIpfpmMcpBackwardDelayMulti | 1.3.6.1.4.1.2011.5.25.316.1.2.8.1.14 | Integer32 | RO | |
column · Integer32 · read-only · current The backward flow delay(microsecond) in multi-in-point two-way delay measurement. | ||||
| ChwIpfpmMcpBackwardDelayMultiVariation | 1.3.6.1.4.1.2011.5.25.316.1.2.8.1.15 | Integer32 | RO | |
column · Integer32 · read-only · current The backward flow variation(microsecond) in multi-in-point two-way delay measurement. | ||||
| NhwIpfpmDcpObjects | 1.3.6.1.4.1.2011.5.25.316.2 | |||
| NhwIpfpmDcpConfiguration | 1.3.6.1.4.1.2011.5.25.316.2.1 | |||
| NhwIpfpmDcpGlobalTable | 1.3.6.1.4.1.2011.5.25.316.2.1.1 | |||
| ShwIpfpmDcpEnable | 1.3.6.1.4.1.2011.5.25.316.2.1.1.1 | HWEnabledStatus | RW | |
scalar · HWEnabledStatus · read-write · current This object indicates that the DCP (Data Collecting Point) function is 'enabled(1)' or 'disabled(2)'. | ||||
| ShwIpfpmDcpId | 1.3.6.1.4.1.2011.5.25.316.2.1.1.2 | IpAddress | RW | |
scalar · IpAddress · read-write · current The value of this object indicates the identification of DCP. The value 0.0.0.0 represents that it is not configured. | ||||
| ShwIpfpmDcpMeasureColorFlag | 1.3.6.1.4.1.2011.5.25.316.2.1.1.3 | OCTET STRING (SIZE (3)) | RW | |
scalar · OCTET STRING (SIZE (3)) · read-write · current This string object indicates the bits of an IP packet used for color measurement. the length of string is 3,first and second character range is <1-6>, third character range is <0-6>. the three characters can not same. The character '0' represents none flag bit. The character '1' represents the bit0 of the FLAGS byte. The character '2' represents the bit3 of the TOS byte. The character '3' represents the bit4 of the TOS byte. The character '4' represents the bit5 of the TOS byte. The character '5' represents the bit6 of the TOS byte. The character '6' represents the bit7 of the TOS byte. the first character represents loss measurement color-bit, the second character represents delay measurement color-bit, the third character represents multicast measurement color-bit. | ||||
| ShwIpfpmDcpMcpId | 1.3.6.1.4.1.2011.5.25.316.2.1.1.6 | IpAddress | RW | |
scalar · IpAddress · read-write · current Identification of the MCP that DCP reports measure data of the test instances not specified the object 'hwIpfpmDcpInstMcpId' to. The value 0.0.0.0 represents that it is not configured. | ||||
| ShwIpfpmDcpMcpPort | 1.3.6.1.4.1.2011.5.25.316.2.1.1.7 | Integer32 (1024..65535) | RW | |
scalar · Integer32 (1024..65535) · read-write · current The listening port of the MCP that DCP reports measure data of the test instances not specified the object 'hwIpfpmDcpInstMcpPort' to. It need setting 'hwIpfpmDcpMcpId' first before setting this object. | ||||
| ShwIpfpmDcpMcpVpnName | 1.3.6.1.4.1.2011.5.25.316.2.1.1.8 | OCTET STRING (SIZE (0..31)) | RW | |
scalar · OCTET STRING (SIZE (0..31)) · read-write · current The name of the VPN instance through which the DCP and the MCP communicates. 'hwIpfpmDcpInstMcpId' should be setted first before setting this object. | ||||
| ShwIpfpmDcpMcpVpnType | 1.3.6.1.4.1.2011.5.25.316.2.1.1.9 | HWIpfpmVpnType | RW | |
scalar · HWIpfpmVpnType · read-write · current The type of the VPN instance. 'hwIpfpmDcpInstMcpId' should be setted first
before setting this object.
Available options:
none(0)
manage-vpn(1)
vpn-instance(2) | ||||
| ShwIpfpmPeriodSource | 1.3.6.1.4.1.2011.5.25.316.2.1.1.10 | HWIpfpmClockSoure | RW | |
scalar · HWIpfpmClockSoure · read-write · current The clock source using by period.Priority should be given to the use of
this setting in period calculation.
Available options:
default(0)
ntp(1) | ||||
| ThwIpfpmDcpAuthTable | 1.3.6.1.4.1.2011.5.25.316.2.1.7 | NA | ||
table · not-accessible · current IPFPM authentication information for DCP.The index of this table is hwIpfpmDcpAuthKeyId. | ||||
| RhwIpfpmDcpAuthEntry | 1.3.6.1.4.1.2011.5.25.316.2.1.7.1 | NA | ||
row · not-accessible · current IPFPM authentication information for DCP.The index of this entry is hwIpfpmDcpAuthKeyId.
| ||||
| ChwIpfpmDcpAuthKeyId | 1.3.6.1.4.1.2011.5.25.316.2.1.7.1.1 | Integer32 (1..64) | NA | |
column · Integer32 (1..64) · not-accessible · current Identification of the DCP authentication. | ||||
| ChwIpfpmDcpAuthType | 1.3.6.1.4.1.2011.5.25.316.2.1.7.1.2 | HWIpfpmAuthType | RW | |
column · HWIpfpmAuthType · read-write · current Authentication type of the DCP. The enumeration 'hmac-sha256(1)' represents the password is sent after being encrypted through hmac-sha256. By default, authentication is not configured. | ||||
| ChwIpfpmDcpAuthKey | 1.3.6.1.4.1.2011.5.25.316.2.1.7.1.3 | OCTET STRING (SIZE (0..432)) | RW | |
column · OCTET STRING (SIZE (0..432)) · read-write · current The password used as an IPFPM authentication key. | ||||
| ChwIpfpmDcpAuthRowStatus | 1.3.6.1.4.1.2011.5.25.316.2.1.7.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current Used for controlling the creation and deletion of this row. | ||||
| ThwIpfpmDcpInstTable | 1.3.6.1.4.1.2011.5.25.316.2.1.8 | NA | ||
table · not-accessible · current IPFPM configuration information for a particular DCP test instance.The index of this table is hwIpfpmDcpInstId. | ||||
| RhwIpfpmDcpInstEntry | 1.3.6.1.4.1.2011.5.25.316.2.1.8.1 | NA | ||
row · not-accessible · current IPFPM configuration information for a particular DCP test instance.The index of this entry is hwIpfpmDcpInstId.
| ||||
| ChwIpfpmDcpInstId | 1.3.6.1.4.1.2011.5.25.316.2.1.8.1.1 | Integer32 (1..8355838 | 16711681..16777214) | AN | |
column · Integer32 (1..8355838 | 16711681..16777214) · accessible-for-notify · current Identification of the test instance. | ||||
| ChwIpfpmDcpInstDesc | 1.3.6.1.4.1.2011.5.25.316.2.1.8.1.2 | OCTET STRING (SIZE (0..64)) | RC | |
column · OCTET STRING (SIZE (0..64)) · read-create · current Description of the test instance. if the string length is 0, it represents that it is not configured. | ||||
| ChwIpfpmDcpInstMcpId | 1.3.6.1.4.1.2011.5.25.316.2.1.8.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current Identification of the MCP that DCP reports measure data of this test instance to. The value 0.0.0.0 represents that it is not configured | ||||
| ChwIpfpmDcpInstMcpPort | 1.3.6.1.4.1.2011.5.25.316.2.1.8.1.4 | Integer32 (1024..65535) | RC | |
column · Integer32 (1024..65535) · read-create · current The listening port of the MCP that DCP reports measure data of this test instance to. It need setting 'hwIpfpmDcpInstMcpId' first before setting this object. | ||||
| ChwIpfpmDcpInstInterval | 1.3.6.1.4.1.2011.5.25.316.2.1.8.1.5 | HWIpfpmInstIntervalType | RC | |
column · HWIpfpmInstIntervalType · read-create · current This object indicates that interval of an test instance is 'interval1s(1)' or 'interval10s(10)' or 'interval60s(60)' or 'interval600s(600)'. | ||||
| ChwIpfpmDcpInstRowStatus | 1.3.6.1.4.1.2011.5.25.316.2.1.8.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current Used for controlling the creation and deletion of this row. | ||||
| ChwIpfpmDcpInstType | 1.3.6.1.4.1.2011.5.25.316.2.1.8.1.7 | HWIpfpmInstType | RC | |
column · HWIpfpmInstType · read-create · current type of the test instance. | ||||
| ChwIpfpmDcpSourceInstId | 1.3.6.1.4.1.2011.5.25.316.2.1.8.1.8 | Integer32 (0 | 16711681..16777214) | RC | |
column · Integer32 (0 | 16711681..16777214) · read-create · current Identification of the source instance. | ||||
| ChwIpfpmDcpInstMcpVpnName | 1.3.6.1.4.1.2011.5.25.316.2.1.8.1.9 | OCTET STRING (SIZE (0..31)) | RC | |
column · OCTET STRING (SIZE (0..31)) · read-create · current The name of the VPN instance through which the DCP and the MCP communicates. 'hwIpfpmDcpInstMcpId' should be setted first before setting this object. | ||||
| ChwIpfpmDcpInstMcpVpnType | 1.3.6.1.4.1.2011.5.25.316.2.1.8.1.10 | HWIpfpmVpnType | RC | |
column · HWIpfpmVpnType · read-create · current The type of the VPN instance. 'hwIpfpmDcpInstMcpId' should be setted first before setting this object. | ||||
| ChwIpfpmDcpInstGroupId | 1.3.6.1.4.1.2011.5.25.316.2.1.8.1.11 | Integer32 (0..8355838) | RC | |
column · Integer32 (0..8355838) · read-create · current The group identification of the test instance. | ||||
| ThwIpfpmDcpInstAuthTable | 1.3.6.1.4.1.2011.5.25.316.2.1.9 | NA | ||
table · not-accessible · current IPFPM authentication information for a particular DCP test instance.The indexes of this table are hwIpfpmDcpInstId and hwIpfpmDcpInstAuthKeyId. | ||||
| RhwIpfpmDcpInstAuthEntry | 1.3.6.1.4.1.2011.5.25.316.2.1.9.1 | NA | ||
row · not-accessible · current IPFPM authentication information for a particular DCP test instance.The indexes of this entry are hwIpfpmDcpInstId and hwIpfpmDcpInstAuthKeyId. | ||||
| ChwIpfpmDcpInstAuthKeyId | 1.3.6.1.4.1.2011.5.25.316.2.1.9.1.1 | Integer32 (1..64) | NA | |
column · Integer32 (1..64) · not-accessible · current Identification of the DCP authentication. | ||||
| ChwIpfpmDcpInstAuthType | 1.3.6.1.4.1.2011.5.25.316.2.1.9.1.2 | HWIpfpmAuthType | RW | |
column · HWIpfpmAuthType · read-write · current Authentication type of DCP instance authentication. The
enumeration 'hmac-sha256(1)' represents the password is sent after
being encrypted through hmac-sha256. By default, authentication is
not configured. If this object is not configured and object
'hwIpfpmDcpAuthType' is configured, then this instance uses
'hwIpfpmDcpInstAuthType' and 'hwIpfpmDcpInstAuthKey'
as its authentication. | ||||
| ChwIpfpmDcpInstAuthKey | 1.3.6.1.4.1.2011.5.25.316.2.1.9.1.3 | OCTET STRING (SIZE (0..432)) | RW | |
column · OCTET STRING (SIZE (0..432)) · read-write · current The password used as an DCP test instance authentication key. | ||||
| ChwIpfpmDcpInstAuthRowStatus | 1.3.6.1.4.1.2011.5.25.316.2.1.9.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current Used for controlling the creation and deletion of this row. | ||||
| ThwIpfpmDcpFlowTable | 1.3.6.1.4.1.2011.5.25.316.2.1.10 | NA | ||
table · not-accessible · current IPFPM configuration information for a particular DCP test instance flow.The indexes of this table are hwIpfpmDcpInstId and hwIpfpmDcpFlowType. | ||||
| RhwIpfpmDcpFlowEntry | 1.3.6.1.4.1.2011.5.25.316.2.1.10.1 | NA | ||
row · not-accessible · current IPFPM configuration information for a particular DCP test instance flow.The indexes of this entry are hwIpfpmDcpInstId and hwIpfpmDcpFlowType. | ||||
| ChwIpfpmDcpFlowType | 1.3.6.1.4.1.2011.5.25.316.2.1.10.1.1 | HWIpfpmFlowType | AN | |
column · HWIpfpmFlowType · accessible-for-notify · current This object indicates that the flow is 'forward(1)' or 'backward(2)' or 'bidirectional(3)'. | ||||
| ChwIpfpmDcpFlowProtocol | 1.3.6.1.4.1.2011.5.25.316.2.1.10.1.2 | Integer32 (0..255) | RC | |
column · Integer32 (0..255) · read-create · current This object indicates the protocol specified as the flow feature. 'hwIpfpmDcpFlowSrcPortBgn', 'hwIpfpmDcpFlowSrcPortEnd', 'hwIpfpmDcpFlowDstPortBgn', and 'hwIpfpmDcpFlowDstPortEnd' can be configured only when the value is 6(tcp) or 17(udp). The value 0 represents that this object is not configured. | ||||
| ChwIpfpmDcpFlowDscp | 1.3.6.1.4.1.2011.5.25.316.2.1.10.1.3 | Integer32 (-1..63) | RC | |
column · Integer32 (-1..63) · read-create · current This object indicates the DSCP specified as the flow feature. The value -1 represents that this object is not configured. | ||||
| ChwIpfpmDcpFlowSrcAddr | 1.3.6.1.4.1.2011.5.25.316.2.1.10.1.4 | IpAddress | RC | |
column · IpAddress · read-create · current This object indicates the source ip address specified as the flow feature. The value 0.0.0.0 represents that this object is not configured. | ||||
| ChwIpfpmDcpFlowSrcMaskLen | 1.3.6.1.4.1.2011.5.25.316.2.1.10.1.5 | Integer32 (1..32) | RC | |
column · Integer32 (1..32) · read-create · current This object indicates the source ip mask length specified as the flow feature. | ||||
| ChwIpfpmDcpFlowDstAddr | 1.3.6.1.4.1.2011.5.25.316.2.1.10.1.6 | IpAddress | RC | |
column · IpAddress · read-create · current This object indicates the destination ip address specified as the flow feature. The value 0.0.0.0 represents that this object is not configured. | ||||
| ChwIpfpmDcpFlowDstMaskLen | 1.3.6.1.4.1.2011.5.25.316.2.1.10.1.7 | Integer32 (1..32) | RC | |
column · Integer32 (1..32) · read-create · current This object indicates the destination ip mask length specified as the flow feature. | ||||
| ChwIpfpmDcpFlowSrcPortBgn | 1.3.6.1.4.1.2011.5.25.316.2.1.10.1.8 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current This object indicates the begin value of source port specified as the flow feature. It need configure 'hwIpfpmDcpFlowProtocol' first before configure this object. The value 0 represents that this object is not configured. | ||||
| ChwIpfpmDcpFlowSrcPortEnd | 1.3.6.1.4.1.2011.5.25.316.2.1.10.1.9 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current This object indicates the end value of source port specified as the flow feature. It need configure 'hwIpfpmDcpFlowProtocol' first before configure this object. The value 0 represents that this object is not configured. | ||||
| ChwIpfpmDcpFlowDstPortBgn | 1.3.6.1.4.1.2011.5.25.316.2.1.10.1.10 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current This object indicates the begin value of destination port specified as the flow feature. It need configure 'hwIpfpmDcpFlowProtocol' first before configure this object. The value 0 represents that this object is not configured. | ||||
| ChwIpfpmDcpFlowDstPortEnd | 1.3.6.1.4.1.2011.5.25.316.2.1.10.1.11 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current This object indicates the end value of destination port specified as the flow feature. It need configure 'hwIpfpmDcpFlowProtocol' first before configure this object. The value 0 represents that this object is not configured. | ||||
| ChwIpfpmDcpFlowRowStatus | 1.3.6.1.4.1.2011.5.25.316.2.1.10.1.12 | RowStatus | RC | |
column · RowStatus · read-create · current Used for controlling the creation and deletion of this row. | ||||
| ChwIpfpmDcpFlowOuterSrcAddr | 1.3.6.1.4.1.2011.5.25.316.2.1.10.1.13 | IpAddress | RC | |
column · IpAddress · read-create · current This object indicates the outer source ip address specified as the flow feature. The value 0 represents that this object is not configured. | ||||
| ChwIpfpmDcpFlowOuterDstAddr | 1.3.6.1.4.1.2011.5.25.316.2.1.10.1.14 | IpAddress | RC | |
column · IpAddress · read-create · current This object indicates the outer destination ip address specified as the flow feature. The value 0 represents that this object is not configured. | ||||
| ChwIpfpmDcpFlowForwardGtpTeid | 1.3.6.1.4.1.2011.5.25.316.2.1.10.1.15 | Unsigned32 (0..4294967294) | RC | |
column · Unsigned32 (0..4294967294) · read-create · current This object indicates the value of forward gtp teid specified as the flow feature. The value 0 represents that this object is not configured. | ||||
| ChwIpfpmDcpFlowBackwardGtpTeid | 1.3.6.1.4.1.2011.5.25.316.2.1.10.1.16 | Unsigned32 (0..4294967294) | RC | |
column · Unsigned32 (0..4294967294) · read-create · current This object indicates the value of backward gtp teid specified as the flow feature. The value 0 represents that this object is not configured. | ||||
| ChwIpfpmDcpFlowVxlan | 1.3.6.1.4.1.2011.5.25.316.2.1.10.1.17 | TruthValue | RC | |
column · TruthValue · read-create · current The Vxlan of the flow feature. The value false(2) represents that this object is not configured. | ||||
| ChwIpfpmDcpFlowVni | 1.3.6.1.4.1.2011.5.25.316.2.1.10.1.18 | Integer32 (0..16000000) | RC | |
column · Integer32 (0..16000000) · read-create · current This object indicates the value of vni specified as the flow feature. The value 0 represents that this object is not configured. | ||||
| ThwIpfpmDcpInstTlpTable | 1.3.6.1.4.1.2011.5.25.316.2.1.11 | NA | ||
table · not-accessible · current IPFPM configuration information for a particular TLP. The indexes of this table are hwIpfpmDcpInstId and hwIpfpmDcpTlpId. | ||||
| RhwIpfpmDcpInstTlpEntry | 1.3.6.1.4.1.2011.5.25.316.2.1.11.1 | NA | ||
row · not-accessible · current IPFPM configuration information for a particular TLP. The indexes of this entry are hwIpfpmDcpInstId and hwIpfpmDcpTlpId. | ||||
| ChwIpfpmDcpInstTlpRole | 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.1 | HWIpfpmTlpRole | RC | |
column · HWIpfpmTlpRole · read-create · current The object indicates the TLP position 'in-point(1)' or 'out-point(2) or 'mid-point(3)'. | ||||
| ChwIpfpmDcpInstTlpFlowType | 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.2 | HWIpfpmFlowType | RC | |
column · HWIpfpmFlowType · read-create · current The object indicates the flow type of the instance TLP is 'forward(1)' or 'backward(2)' or 'bidirectional(3)' or 'forwardandbackward(4)'. Only 'forward(1)' and 'backward(2)' can be configured when 'hwIpfpmDcpInstTlpRole' is 'mid-point(3)'. The value 'null(0)' represents that this flow is not configured under the instance. | ||||
| ChwIpfpmDcpInstTlpDirec | 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.3 | HWIpfpmFlowTlpDirec | RC | |
column · HWIpfpmFlowTlpDirec · read-create · current The object indicates the TLP is 'ingress(1)' or 'egress(2)' of the flow of DCP test instance. | ||||
| ChwIpfpmDcpInstTlpVpnLabel | 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.4 | Integer32 (-1..1048575) | RC | |
column · Integer32 (-1..1048575) · read-create · current The VPN label of of the flow that the TLP measured. The value -1 represents that this object is not configured. | ||||
| ChwIpfpmDcpInstTlpCtrlWordFlag | 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.5 | TruthValue | RC | |
column · TruthValue · read-create · current The control word flag of the flow that the TLP measured. The value false(2) represents that this object is not configured. | ||||
| ChwIpfpmDcpInstTlpLspLabel | 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.6 | Integer32 (-1..1048575) | RC | |
column · Integer32 (-1..1048575) · read-create · current The LSP label of the flow that the TLP measured. The value -1 represents that this object is not configured. | ||||
| ChwIpfpmDcpInstTlpL2VpnFlag | 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.7 | TruthValue | RC | |
column · TruthValue · read-create · current The L2VPN flag of the flow that the TLP measured. The value false(2) represents that this object is not configured. | ||||
| ChwIpfpmDcpInstTlpTpId | 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.8 | OCTET STRING (SIZE (3..4)) | RC | |
column · OCTET STRING (SIZE (3..4)) · read-create · current The tpid for vlan. The value range is from '600' to 'FFFF'. | ||||
| ChwIpfpmDcpInstTlpRowStatus | 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.9 | RowStatus | RC | |
column · RowStatus · read-create · current Used for controlling the creation and deletion of this row. | ||||
| ChwIpfpmDcpInstTlpMultiSrcType | 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.10 | HWIpfpmMMSType | RC | |
column · HWIpfpmMMSType · read-create · current The object indicates the type of multicastsrc 'master(0)'or 'slave(1)'. | ||||
| ChwIpfpmDcpInstTlpFlowLabelFlag | 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.11 | TruthValue | RC | |
column · TruthValue · read-create · current This value indicate whether the flow-label is configured. | ||||
| ChwIpfpmDcpInstTlpLspLabel2 | 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.12 | Integer32 (-2..1048575) | RC | |
column · Integer32 (-2..1048575) · read-create · current The LSP label of the flow that the TLP measured. The value -1 represents that this object is not configured. The value -2 represents that this object matches any label. | ||||
| ChwIpfpmDcpInstTlpLspLabel3 | 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.13 | Integer32 (-1..1048575) | RC | |
column · Integer32 (-1..1048575) · read-create · current The LSP label of the flow that the TLP measured. The value -1 represents that this object is not configured. | ||||
| ChwIpfpmDcpInstTlpOuterVlan | 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.14 | Integer32 (0..4094) | RC | |
column · Integer32 (0..4094) · read-create · current The outer-vlan id of the flow that the TLP measured. The value 0 represents that this object is not configured. | ||||
| ChwIpfpmDcpInstTlpInnerVlan | 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.15 | Integer32 (0..4094) | RC | |
column · Integer32 (0..4094) · read-create · current The inner-vlan id of the flow that the TLP measured. The value 0 represents that this object is not configured. | ||||
| ChwIpfpmDcpInstTlpBackwardVpnLabel | 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.16 | Integer32 (-1..1048575) | RC | |
column · Integer32 (-1..1048575) · read-create · current The VPN label of of the flow that the TLP measured. The value -1 represents that this object is not configured. | ||||
| ChwIpfpmDcpInstTlpBackwardCtrlWordFlag | 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.17 | TruthValue | RC | |
column · TruthValue · read-create · current The control word flag of the flow that the TLP measured. The value false(2) represents that this object is not configured. | ||||
| ChwIpfpmDcpInstTlpBackwardLspLabel | 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.18 | Integer32 (-1..1048575) | RC | |
column · Integer32 (-1..1048575) · read-create · current The LSP label of the flow that the TLP measured. The value -1 represents that this object is not configured. | ||||
| ChwIpfpmDcpInstTlpBackwardLspLabel2 | 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.19 | Integer32 (-2..1048575) | RC | |
column · Integer32 (-2..1048575) · read-create · current The LSP label of the flow that the TLP measured. The value -1 represents that this object is not configured. The value -2 represents that this object matches any label. | ||||
| ChwIpfpmDcpInstTlpBackwardLspLabel3 | 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.20 | Integer32 (-1..1048575) | RC | |
column · Integer32 (-1..1048575) · read-create · current The LSP label of the flow that the TLP measured. The value -1 represents that this object is not configured. | ||||
| ChwIpfpmDcpInstTlpBackwardL2VpnFlag | 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.21 | TruthValue | RC | |
column · TruthValue · read-create · current The L2VPN flag of the flow that the TLP measured. The value false(2) represents that this object is not configured. | ||||
| ChwIpfpmDcpInstTlpBackwardFlowLabelFlag | 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.22 | TruthValue | RC | |
column · TruthValue · read-create · current This object indicates whether the flow label function is configured for the backward target flow. If the value is false(2), the flow label function is not configured. | ||||
| ChwIpfpmDcpInstTlpBackwardOuterVlan | 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.23 | Integer32 (0..4094) | RC | |
column · Integer32 (0..4094) · read-create · current The outer-vlan id of the flow that the TLP measured. The value 0 represents that this object is not configured. | ||||
| ChwIpfpmDcpInstTlpBackwardInnerVlan | 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.24 | Integer32 (0..4094) | RC | |
column · Integer32 (0..4094) · read-create · current The inner-vlan id of the flow that the TLP measured. The value 0 represents that this object is not configured. | ||||
| ChwIpfpmDcpInstTlpBackwardTpId | 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.25 | OCTET STRING (SIZE (3..4)) | RC | |
column · OCTET STRING (SIZE (3..4)) · read-create · current The tpid for vlan. The value range is from '600' to 'FFFF'. | ||||
| ThwIpfpmDcpLossMeasTable | 1.3.6.1.4.1.2011.5.25.316.2.1.12 | NA | ||
table · not-accessible · current IPFPM loss measure configuration information for a particular DCP test instance.The indexes of this table are hwIpfpmDcpInstId and hwIpfpmDcpLossTlpRole. | ||||
| RhwIpfpmDcpLossMeasEntry | 1.3.6.1.4.1.2011.5.25.316.2.1.12.1 | NA | ||
row · not-accessible · current IPFPM loss measure configuration information for a particular DCP test instance.The indexes of this entry are hwIpfpmDcpInstId and hwIpfpmDcpLossTlpRole. | ||||
| ChwIpfpmDcpLossEnable | 1.3.6.1.4.1.2011.5.25.316.2.1.12.1.1 | HWEnabledStatus | RW | |
column · HWEnabledStatus · read-write · current This object indicates that the on-demand loss measure function is 'enabled(1)' or 'disabled(2)'. | ||||
| ChwIpfpmDcpLossContEnable | 1.3.6.1.4.1.2011.5.25.316.2.1.12.1.2 | HWEnabledStatus | RW | |
column · HWEnabledStatus · read-write · current This object indicates that the continual loss measure function is 'enabled(1)' or 'disabled(2)'. | ||||
| ChwIpfpmDcpLossTimeRange | 1.3.6.1.4.1.2011.5.25.316.2.1.12.1.3 | HWIpfpmMeasTimeRangeType | RW | |
column · HWIpfpmMeasTimeRangeType · read-write · current The time range in which the on-demand loss measure function is enabled. The enumeration values include 'timerange5m(5)', 'timerange10m(10)', 'timerange15m(15)', and 'timerange30m(30)'. The value 'null(0)' represents that this object is not configured. | ||||
| ChwIpfpmDcpLossTlpRole | 1.3.6.1.4.1.2011.5.25.316.2.1.12.1.4 | HWIpfpmLossTlpRole | NA | |
column · HWIpfpmLossTlpRole · not-accessible · current The type of TLP that loss measure enabled on. The enumeration values include 'e2e(1)','section(2)' . The value 'e2e(1)' represents that this object is end-end. The value 'section(2)' represents that this object is mid-point. | ||||
| ThwIpfpmDcpDelayMeasTable | 1.3.6.1.4.1.2011.5.25.316.2.1.13 | NA | ||
table · not-accessible · current IPFPM delay measure configuration information for a particular DCP test instance.The indexes of this table are hwIpfpmDcpInstId and hwIpfpmDcpDelayTlpRole. | ||||
| RhwIpfpmDcpDelayMeasEntry | 1.3.6.1.4.1.2011.5.25.316.2.1.13.1 | NA | ||
row · not-accessible · current IPFPM delay measure configuration information for a particular DCP test instance.The indexes of this entry are hwIpfpmDcpInstId and hwIpfpmDcpDelayTlpRole. | ||||
| ChwIpfpmDcpDelayEnable | 1.3.6.1.4.1.2011.5.25.316.2.1.13.1.1 | HWEnabledStatus | RW | |
column · HWEnabledStatus · read-write · current This object indicates that the on-demand delay measure function is 'enabled(1)' or 'disabled(2)'. | ||||
| ChwIpfpmDcpDelayContEnable | 1.3.6.1.4.1.2011.5.25.316.2.1.13.1.2 | HWEnabledStatus | RW | |
column · HWEnabledStatus · read-write · current This object indicates that the continual delay measure function is 'enabled(1)' or 'disabled(2)'. | ||||
| ChwIpfpmDcpDelayMeasType | 1.3.6.1.4.1.2011.5.25.316.2.1.13.1.3 | HWIpfpmDelayMeasType | RW | |
column · HWIpfpmDelayMeasType · read-write · current The type of delay measure. The enumeration values include 'oneway(1)' and 'twoway(2)'. The value 'null(0)' represents that this object is not configured. | ||||
| ChwIpfpmDcpDelayTimeRange | 1.3.6.1.4.1.2011.5.25.316.2.1.13.1.4 | HWIpfpmMeasTimeRangeType | RW | |
column · HWIpfpmMeasTimeRangeType · read-write · current The time range in which the on-demand delay measure function is enabled. The enumeration values include 'timerange5m(5)', 'timerange10m(10)', 'timerange15m(15)', and 'timerange30m(30)'. The value 'null(0)' represents that this object is not configured. | ||||
| ChwIpfpmDcpDelayTlpRole | 1.3.6.1.4.1.2011.5.25.316.2.1.13.1.5 | HWIpfpmDelayTlpRole | NA | |
column · HWIpfpmDelayTlpRole · not-accessible · current The type of TLP that delay measure enabled on. The enumeration values include 'e2e(1)','section(2)' . The value 'e2e(1)' represents that this object is end-end. The value 'section(2)' represents that this object is mid-point. | ||||
| ChwIpfpmDcpDelayForwardTlpId | 1.3.6.1.4.1.2011.5.25.316.2.1.13.1.6 | Integer32 (0..16777215) | RW | |
column · Integer32 (0..16777215) · read-write · current The ingress TLP of the flow for one-way delay measure or the ingress TLP of the forward flow for two-way delay measure. The value 0 represents that this object is not configured. | ||||
| ChwIpfpmDcpDelayBackwardTlpId | 1.3.6.1.4.1.2011.5.25.316.2.1.13.1.7 | Integer32 (0..16777215) | RW | |
column · Integer32 (0..16777215) · read-write · current The ingress TLP of the backward flow for two-way delay measure. The value 0 represents that this object is not configured. | ||||
| ThwIpfpmDcpTlpTable | 1.3.6.1.4.1.2011.5.25.316.2.1.14 | NA | ||
table · not-accessible · current IPFPM configuration information for a particular TLP on interface. The index of this table is hwIpfpmDcpTlpId. | ||||
| RhwIpfpmDcpTlpEntry | 1.3.6.1.4.1.2011.5.25.316.2.1.14.1 | NA | ||
row · not-accessible · current IPFPM configuration information for a particular TLP on interface. The index of this entry is hwIpfpmDcpTlpId.
| ||||
| ChwIpfpmDcpTlpId | 1.3.6.1.4.1.2011.5.25.316.2.1.14.1.1 | Integer32 (1..16777215) | NA | |
column · Integer32 (1..16777215) · not-accessible · current Identification of TLP. | ||||
| ChwIpfpmDcpTlpIfIndex | 1.3.6.1.4.1.2011.5.25.316.2.1.14.1.2 | InterfaceIndex | RC | |
column · InterfaceIndex · read-create · current The index of the port that the TLP configured on. | ||||
| ChwIpfpmDcpTlpRowStatus | 1.3.6.1.4.1.2011.5.25.316.2.1.14.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current Used for controlling the creation and deletion of this row. | ||||
| ChwIpfpmDcpTlpVlanId | 1.3.6.1.4.1.2011.5.25.316.2.1.14.1.4 | Integer32 (0..4094 | 65535) | RC | |
column · Integer32 (0..4094 | 65535) · read-create · current The VLAN ID of the TLP measured. The value 0 represents ce-default-vlan. The value 65535 represents that this object is not configured. | ||||
| ThwIpfpmDcpTlpQueryTable | 1.3.6.1.4.1.2011.5.25.316.2.1.15 | NA | ||
table · not-accessible · current The TLP information which is configured with the interface. The indexes of this table are hwIpfpmDcpTlpQueryIfIndex and hwIpfpmDcpTlpQueryVlanId. | ||||
| RhwIpfpmDcpTlpQueryEntry | 1.3.6.1.4.1.2011.5.25.316.2.1.15.1 | NA | ||
row · not-accessible · current The TLP information which is configured with the interface. The indexes of this entry are hwIpfpmDcpTlpQueryIfIndex and hwIpfpmDcpTlpQueryVlanId. | ||||
| ChwIpfpmDcpTlpQueryIfIndex | 1.3.6.1.4.1.2011.5.25.316.2.1.15.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The interface index which is configured with TLP. | ||||
| ChwIpfpmDcpTlpQueryTlpId | 1.3.6.1.4.1.2011.5.25.316.2.1.15.1.2 | Integer32 (1..16777215) | RO | |
column · Integer32 (1..16777215) · read-only · current The TLP ID which is configured on the interface. | ||||
| ChwIpfpmDcpTlpQueryVlanId | 1.3.6.1.4.1.2011.5.25.316.2.1.15.1.3 | Integer32 (0..4094 | 65535) | NA | |
column · Integer32 (0..4094 | 65535) · not-accessible · current The VLAN ID of the TLP measured. The value 0 represents ce-default-vlan. The value 65535 represents that this object is not configured. | ||||
| ThwIpfpmDcpSrcInstReferQueryTable | 1.3.6.1.4.1.2011.5.25.316.2.1.16 | NA | ||
table · not-accessible · current The information is that the multicast source instance referred by some multicast receiver instances. The index of this table is hwIpfpmDcpInstId. | ||||
| RhwIpfpmDcpSrcInstReferQueryEntry | 1.3.6.1.4.1.2011.5.25.316.2.1.16.1 | NA | ||
row · not-accessible · current The information is that the multicast source instance referred by some multicast receiver instances. The index of this entry is hwIpfpmDcpInstId.
| ||||
| ChwIpfpmDcpSrcInstReferCnt | 1.3.6.1.4.1.2011.5.25.316.2.1.16.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The object indicates the counter that the multicast source instance referred by some multicast receiver instances. | ||||
| ThwIpfpmDcpTlpQueryExtTable | 1.3.6.1.4.1.2011.5.25.316.2.1.17 | NA | ||
table · not-accessible · current The TLP information which is configured with the interface. The indexes of this table are hwIpfpmDcpTlpQueryExtIfIndex and hwIpfpmDcpTlpQueryExtVlanId and hwIpfpmDcpTlpQueryExtOntId and hwIpfpmDcpTlpQueryExtOntPortType and hwIpfpmDcpTlpQueryExtOntPortId. | ||||
| RhwIpfpmDcpTlpQueryExtEntry | 1.3.6.1.4.1.2011.5.25.316.2.1.17.1 | NA | ||
row · not-accessible · current The TLP information which is configured with the interface. The indexes of this entry are hwIpfpmDcpTlpQueryExtIfIndex and hwIpfpmDcpTlpQueryExtVlanId and hwIpfpmDcpTlpQueryExtOntId and hwIpfpmDcpTlpQueryExtOntPortType and hwIpfpmDcpTlpQueryExtOntPortId. | ||||
| ChwIpfpmDcpTlpQueryExtIfIndex | 1.3.6.1.4.1.2011.5.25.316.2.1.17.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The interface index which is configured with TLP. | ||||
| ChwIpfpmDcpTlpQueryExtTlpId | 1.3.6.1.4.1.2011.5.25.316.2.1.17.1.2 | Integer32 (1..16777215) | RO | |
column · Integer32 (1..16777215) · read-only · current The TLP ID which is configured on the interface. | ||||
| ChwIpfpmDcpTlpQueryExtVlanId | 1.3.6.1.4.1.2011.5.25.316.2.1.17.1.3 | Integer32 (0..4094 | 65535) | NA | |
column · Integer32 (0..4094 | 65535) · not-accessible · current The VLAN ID of the TLP measured. The value 0 represents ce-default-vlan. The value 65535 represents that this object is not configured. | ||||
| ChwIpfpmDcpTlpQueryExtOntId | 1.3.6.1.4.1.2011.5.25.316.2.1.17.1.4 | Integer32 | NA | |
column · Integer32 · not-accessible · current This object indicates the ONT ID. | ||||
| ChwIpfpmDcpTlpQueryExtOntPortType | 1.3.6.1.4.1.2011.5.25.316.2.1.17.1.5 | INTEGER | NA | |
column · INTEGER · not-accessible · current This object indicates the ONT port's type. Options: 1. eth (47) -indicates ONT port's type is the eth type. 2. invalid(-1) -indicates ONT port's type is not matched.
| ||||
| ChwIpfpmDcpTlpQueryExtOntPortId | 1.3.6.1.4.1.2011.5.25.316.2.1.17.1.6 | Integer32 | NA | |
column · Integer32 · not-accessible · current This object indicates the ONT port ID. | ||||
| ThwIpfpmDcpTlpExtTable | 1.3.6.1.4.1.2011.5.25.316.2.1.18 | NA | ||
table · not-accessible · current IPFPM configuration information for a particular TLP on interface. The index of this table is hwIpfpmDcpExtTlpId. | ||||
| RhwIpfpmDcpTlpExtEntry | 1.3.6.1.4.1.2011.5.25.316.2.1.18.1 | NA | ||
row · not-accessible · current IPFPM configuration information for a particular TLP on interface. The index of this entry is hwIpfpmDcpExtTlpId.
| ||||
| ChwIpfpmDcpExtTlpId | 1.3.6.1.4.1.2011.5.25.316.2.1.18.1.1 | Integer32 (1..16777215) | NA | |
column · Integer32 (1..16777215) · not-accessible · current Identification of TLP. | ||||
| ChwIpfpmDcpTlpExtIfIndex | 1.3.6.1.4.1.2011.5.25.316.2.1.18.1.2 | Integer32 | RC | |
column · Integer32 · read-create · current The index of the port that the TLP configured on. | ||||
| ChwIpfpmDcpTlpExtRowStatus | 1.3.6.1.4.1.2011.5.25.316.2.1.18.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current Used for controlling the creation and deletion of this row. | ||||
| ChwIpfpmDcpTlpExtVlanId | 1.3.6.1.4.1.2011.5.25.316.2.1.18.1.4 | Integer32 (0..4094 | 65535) | RC | |
column · Integer32 (0..4094 | 65535) · read-create · current The VLAN ID of the TLP measured. The value 0 represents ce-default-vlan. The value 65535 represents that this object is not configured. | ||||
| ChwIpfpmDcpTlpExtOntId | 1.3.6.1.4.1.2011.5.25.316.2.1.18.1.5 | Integer32 | RC | |
column · Integer32 · read-create · current This object indicates the ONT ID. The value -1 represents that this object is not configured. | ||||
| ChwIpfpmDcpTlpExtOntPortType | 1.3.6.1.4.1.2011.5.25.316.2.1.18.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current This object indicates the ONT port's type.
Options:
1. eth (47) -indicates ONT port's type is the eth type.
2. invalid(-1) -indicates ONT port's type is not matched.
DEFVAL { -1 } .
| ||||
| ChwIpfpmDcpTlpExtOntPortId | 1.3.6.1.4.1.2011.5.25.316.2.1.18.1.7 | Integer32 | RC | |
column · Integer32 · read-create · current This object indicates the ONT port ID. The value -1 represents that this object is not configured. | ||||
| ThwIpfpmDcpInstTlpNHTable | 1.3.6.1.4.1.2011.5.25.316.2.1.19 | NA | ||
table · not-accessible · current IPFPM nexthop configuration information for a particular TLP. The indexes of this table are hwIpfpmDcpInstId and hwIpfpmDcpTlpId and hwIpfpmDcpNexthopIp. | ||||
| RhwIpfpmDcpInstTlpNHEntry | 1.3.6.1.4.1.2011.5.25.316.2.1.19.1 | NA | ||
row · not-accessible · current IPFPM nexthop configuration information for a particular TLP. The indexes of this entry are hwIpfpmDcpInstId and hwIpfpmDcpTlpId and hwIpfpmDcpNexthopIp. | ||||
| ChwIpfpmDcpNexthopIp | 1.3.6.1.4.1.2011.5.25.316.2.1.19.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current The object indicates the nexthop information for a particular TLP. | ||||
| ChwIpfpmDcpInstTlpNHRowStatus | 1.3.6.1.4.1.2011.5.25.316.2.1.19.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current Used for controlling the creation and deletion of this row. | ||||
| ThwIpfpmDcpInstTlpIndexTable | 1.3.6.1.4.1.2011.5.25.316.2.1.20 | NA | ||
table · not-accessible · current IPFPM configuration information for a particular load balancing path TLP. The indexes of this table are hwIpfpmDcpInstId and hwIpfpmDcpTlpId and hwIpfpmIndex. | ||||
| RhwIpfpmDcpInstTlpIndexEntry | 1.3.6.1.4.1.2011.5.25.316.2.1.20.1 | NA | ||
row · not-accessible · current IPFPM configuration information for a particular load balancing path TLP. The indexes of this entry are hwIpfpmDcpInstId and hwIpfpmDcpTlpId and hwIpfpmIndex. | ||||
| ChwIpfpmIndex | 1.3.6.1.4.1.2011.5.25.316.2.1.20.1.1 | Integer32 (1..16) | NA | |
column · Integer32 (1..16) · not-accessible · current The indexid of a load balancing path. The value range is from '1' to '16'. | ||||
| ChwIpfpmDcpInstTlpRoleIndex | 1.3.6.1.4.1.2011.5.25.316.2.1.20.1.2 | HWIpfpmTlpRoleIndex | RC | |
column · HWIpfpmTlpRoleIndex · read-create · current The object indicates the TLP position 'mid-point(3)'. | ||||
| ChwIpfpmDcpInstTlpFlowTypeIndex | 1.3.6.1.4.1.2011.5.25.316.2.1.20.1.3 | HWIpfpmFlowType | RC | |
column · HWIpfpmFlowType · read-create · current The object indicates the flow type of the instance TLP is 'forward(1)' or 'backward(2)' or 'bidirectional(3)' or 'forwardandbackward(4)'. Only 'forward(1)' and 'backward(2)' can be configured when 'hwIpfpmDcpInstTlpRoleIndex' is 'mid-point(3)'. The value 'null(0)' represents that this flow is not configured under the instance. | ||||
| ChwIpfpmDcpInstTlpDirecIndex | 1.3.6.1.4.1.2011.5.25.316.2.1.20.1.4 | HWIpfpmFlowTlpDirec | RC | |
column · HWIpfpmFlowTlpDirec · read-create · current The object indicates the TLP is 'ingress(1)' or 'egress(2)' of the flow of DCP test instance. | ||||
| ChwIpfpmDcpInstTlpVpnLabelIndex | 1.3.6.1.4.1.2011.5.25.316.2.1.20.1.5 | Integer32 (-1..1048575) | RC | |
column · Integer32 (-1..1048575) · read-create · current The VPN label of of the flow that the TLP measured. The value -1 represents that this object is not configured. | ||||
| ChwIpfpmDcpInstTlpCtrlWordFlagIndex | 1.3.6.1.4.1.2011.5.25.316.2.1.20.1.6 | TruthValue | RC | |
column · TruthValue · read-create · current The control word flag of the flow that the TLP measured. The value false(2) represents that this object is not configured. | ||||
| ChwIpfpmDcpInstTlpLspLabelIndex | 1.3.6.1.4.1.2011.5.25.316.2.1.20.1.7 | Integer32 (-1..1048575) | RC | |
column · Integer32 (-1..1048575) · read-create · current The LSP label of the flow that the TLP measured. The value -1 represents that this object is not configured. | ||||
| ChwIpfpmDcpInstTlpL2VpnFlagIndex | 1.3.6.1.4.1.2011.5.25.316.2.1.20.1.8 | TruthValue | RC | |
column · TruthValue · read-create · current The L2VPN flag of the flow that the TLP measured. The value false(2) represents that this object is not configured. | ||||
| ChwIpfpmDcpInstTlpTpIdIndex | 1.3.6.1.4.1.2011.5.25.316.2.1.20.1.9 | OCTET STRING (SIZE (3..4)) | RC | |
column · OCTET STRING (SIZE (3..4)) · read-create · current The tpid for vlan. The value range is from '600' to 'FFFF'. | ||||
| ChwIpfpmDcpInstTlpRowStatusIndex | 1.3.6.1.4.1.2011.5.25.316.2.1.20.1.10 | RowStatus | RC | |
column · RowStatus · read-create · current Used for controlling the creation and deletion of this row. | ||||
| ChwIpfpmDcpInstTlpFlowLabelFlagIndex | 1.3.6.1.4.1.2011.5.25.316.2.1.20.1.11 | TruthValue | RC | |
column · TruthValue · read-create · current This value indicate whether the flow-label is configured. | ||||
| ChwIpfpmDcpInstTlpLspLabel2Index | 1.3.6.1.4.1.2011.5.25.316.2.1.20.1.12 | Integer32 (-1..1048575) | RC | |
column · Integer32 (-1..1048575) · read-create · current The LSP label of the flow that the TLP measured. The value -1 represents that this object is not configured. The value -2 represents that this object matches any label. | ||||
| ChwIpfpmDcpInstTlpBackwardVpnLabelIndex | 1.3.6.1.4.1.2011.5.25.316.2.1.20.1.13 | Integer32 (-1..1048575) | RC | |
column · Integer32 (-1..1048575) · read-create · current The VPN label of of the flow that the TLP measured. The value -1 represents that this object is not configured. | ||||
| ChwIpfpmDcpInstTlpBackwardCtrlWordFlagIndex | 1.3.6.1.4.1.2011.5.25.316.2.1.20.1.14 | TruthValue | RC | |
column · TruthValue · read-create · current The control word flag of the flow that the TLP measured. The value false(2) represents that this object is not configured. | ||||
| ChwIpfpmDcpInstTlpBackwardLspLabelIndex | 1.3.6.1.4.1.2011.5.25.316.2.1.20.1.15 | Integer32 (-1..1048575) | RC | |
column · Integer32 (-1..1048575) · read-create · current The LSP label of the flow that the TLP measured. The value -1 represents that this object is not configured. | ||||
| ChwIpfpmDcpInstTlpBackwardLspLabel2Index | 1.3.6.1.4.1.2011.5.25.316.2.1.20.1.16 | Integer32 (-1..1048575) | RC | |
column · Integer32 (-1..1048575) · read-create · current The LSP label of the flow that the TLP measured. The value -1 represents that this object is not configured. The value -2 represents that this object matches any label. | ||||
| ChwIpfpmDcpInstTlpBackwardL2VpnFlagIndex | 1.3.6.1.4.1.2011.5.25.316.2.1.20.1.17 | TruthValue | RC | |
column · TruthValue · read-create · current The L2VPN flag of the flow that the TLP measured. The value false(2) represents that this object is not configured. | ||||
| ChwIpfpmDcpInstTlpBackwardFlowLabelFlagIndex | 1.3.6.1.4.1.2011.5.25.316.2.1.20.1.18 | TruthValue | RC | |
column · TruthValue · read-create · current This value indicate whether the flow-label is configured. | ||||
| ChwIpfpmDcpInstTlpBackwardTpIdIndex | 1.3.6.1.4.1.2011.5.25.316.2.1.20.1.19 | OCTET STRING (SIZE (3..4)) | RC | |
column · OCTET STRING (SIZE (3..4)) · read-create · current The tpid for vlan. The value range is from '600' to 'FFFF'. | ||||
| ThwIpfpmDcpInstTlpNHIndexTable | 1.3.6.1.4.1.2011.5.25.316.2.1.21 | NA | ||
table · not-accessible · current IPFPM nexthop configuration information for a a particular load balancing path TLP. The indexes of this table are hwIpfpmDcpInstId and hwIpfpmDcpTlpId and hwIpfpmIndex and hwIpfpmDcpNexthopIp. | ||||
| RhwIpfpmDcpInstTlpNHIndexEntry | 1.3.6.1.4.1.2011.5.25.316.2.1.21.1 | NA | ||
row · not-accessible · current IPFPM nexthop configuration information for a a particular load balancing path TLP. The indexes of this entry are hwIpfpmDcpInstId and hwIpfpmDcpTlpId and hwIpfpmIndex and hwIpfpmDcpNexthopIp. | ||||
| ChwIpfpmDcpInstTlpNHIndexRowStatus | 1.3.6.1.4.1.2011.5.25.316.2.1.21.1.1 | RowStatus | RC | |
column · RowStatus · read-create · current Used for controlling the creation and deletion of this row. | ||||
| NhwIpfpmDcpTrapObjects | 1.3.6.1.4.1.2011.5.25.316.2.2 | |||
| ShwIpfpmTlpExceedBoardId | 1.3.6.1.4.1.2011.5.25.316.2.2.1 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current The board ID that the tlp exceed the threshold. | ||||
| ShwIpfpmTlpNumber | 1.3.6.1.4.1.2011.5.25.316.2.2.2 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current The number of tlp. | ||||
| ShwIpfpmTlpThreshold | 1.3.6.1.4.1.2011.5.25.316.2.2.3 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current The threshold of tlp. | ||||
| ShwIpfpmStreamUsed | 1.3.6.1.4.1.2011.5.25.316.2.2.4 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current The used number of stream. | ||||
| ShwIpfpmStreamTotal | 1.3.6.1.4.1.2011.5.25.316.2.2.5 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current The total number of stream. | ||||
| ShwIpfpmSlotStr | 1.3.6.1.4.1.2011.5.25.316.2.2.6 | OCTET STRING | AN | |
scalar · OCTET STRING · accessible-for-notify · current The string of slot. | ||||
| ShwIpfpmThreshold | 1.3.6.1.4.1.2011.5.25.316.2.2.7 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current The value of threshold. | ||||
| ShwIpfpmIfIndex | 1.3.6.1.4.1.2011.5.25.316.2.2.8 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current The value of interface index. | ||||
| ShwIpfpmDirection | 1.3.6.1.4.1.2011.5.25.316.2.2.9 | OCTET STRING | AN | |
scalar · OCTET STRING · accessible-for-notify · current The direction of stream. | ||||
| ShwIpfpmSrcIp | 1.3.6.1.4.1.2011.5.25.316.2.2.10 | OCTET STRING | AN | |
scalar · OCTET STRING · accessible-for-notify · current The source ipv4 addresss. | ||||
| ShwIpfpmDstIp | 1.3.6.1.4.1.2011.5.25.316.2.2.11 | OCTET STRING | AN | |
scalar · OCTET STRING · accessible-for-notify · current The destination ipv4 addresss. | ||||
| ShwIpfpmProtocol | 1.3.6.1.4.1.2011.5.25.316.2.2.12 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current The value of protocol. | ||||
| ShwIpfpmSrcPort | 1.3.6.1.4.1.2011.5.25.316.2.2.13 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current The value of l4 source port. | ||||
| ShwIpfpmDstPort | 1.3.6.1.4.1.2011.5.25.316.2.2.14 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current The value of l4 destination port. | ||||
| ShwIpfpmPktDscp | 1.3.6.1.4.1.2011.5.25.316.2.2.15 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current The dscp value of packet. | ||||
| ShwIpfpmCfgDscp | 1.3.6.1.4.1.2011.5.25.316.2.2.16 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current The dscp value of configuration. | ||||
| ShwIpfpmFailReason | 1.3.6.1.4.1.2011.5.25.316.2.2.17 | OCTET STRING | AN | |
scalar · OCTET STRING · accessible-for-notify · current The reason of stream create failure. | ||||
| ShwIpfpmAclUsed | 1.3.6.1.4.1.2011.5.25.316.2.2.18 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current The used number of ACL. | ||||
| ShwIpfpmAclTotal | 1.3.6.1.4.1.2011.5.25.316.2.2.19 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current The total number of ACL. | ||||
| NhwIpfpmTraps | 1.3.6.1.4.1.2011.5.25.316.3 | |||
| !hwIpfpmLossRatioExceed | 1.3.6.1.4.1.2011.5.25.316.3.1 | |||
notification · current A hwIpfpmLossRatioExceed trap is sent when the loss ratio of IPFPM test instance exceeds the uppper threshold in continuous five test intervals. | ||||
| !hwIpfpmLossRatioRecovery | 1.3.6.1.4.1.2011.5.25.316.3.2 | |||
notification · current A hwIpfpmLossRatioRecovery trap is sent when the loss ratio of IPFPM test instance is under the lower threshold in continuous five test intervals. | ||||
| !hwIpfpmOneDelayExceed | 1.3.6.1.4.1.2011.5.25.316.3.3 | |||
notification · current A hwIpfpmOneDelayExceed trap is sent when the one-way delay of IPFPM test instance exceeds the uppper threshold in continuous five test intervals. | ||||
| !hwIpfpmOneDelayRecovery | 1.3.6.1.4.1.2011.5.25.316.3.4 | |||
notification · current A hwIpfpmOneDelayRecovery trap is sent when the one-way delay of IPFPM test instance is under the lower threshold in continuous five test intervals. | ||||
| !hwIpfpmTwoDelayExceed | 1.3.6.1.4.1.2011.5.25.316.3.5 | |||
notification · current A hwIpfpmTwoDelayExceed trap is sent when the two-way delay of IPFPM test instance exceeds the uppper threshold in continuous five test intervals.
| ||||
| !hwIpfpmTwoDelayRecovery | 1.3.6.1.4.1.2011.5.25.316.3.6 | |||
notification · current A hwIpfpmTwoDelayRecovery trap is sent when the two-way delay of IPFPM test instance is under the lower threshold in continuous five test intervals.
| ||||
| !hwIpfpmDcpFlowConflict | 1.3.6.1.4.1.2011.5.25.316.3.7 | |||
notification · current A hwIpfpmDcpFlowConflict trap is sent when the flow configuration conflicts with another existing flow configuration. The first hwIpfpmDcpInstId and hwIpfpmDcpFlowType indicates the specified flow. The second hwIpfpmDcpInstId and hwIpfpmDcpFlowType indicates the existing flow. | ||||
| !hwIpfpmTlpExceed | 1.3.6.1.4.1.2011.5.25.316.3.8 | |||
notification · current A hwIpfpmTlpExceed trap is sent when the number of board tlp exceeds the threshold. | ||||
| !hwIpfpmTlpRecovery | 1.3.6.1.4.1.2011.5.25.316.3.9 | |||
notification · current A hwIpfpmTlpRecovery trap is sent when the number of board tlp is under the threshold. | ||||
| !hwIpfpmMultiOneDelayExceed | 1.3.6.1.4.1.2011.5.25.316.3.10 | |||
notification · current A hwIpfpmMultiOneDelayExceed trap is sent when the one-way delay of IPFPM test instance exceeds the uppper threshold in continuous five test intervals. This trap supports multi one-way delay for a period.
| ||||
| !hwIpfpmMultiOneDelayRecovery | 1.3.6.1.4.1.2011.5.25.316.3.11 | |||
notification · current A hwIpfpmMultiOneDelayRecovery trap is sent when the one-way delay of IPFPM test instance is under the lower threshold in continuous five test intervals. This trap supports multi one-way delay for a period.
| ||||
| !hwIpfpmMultiTwoDelayExceed | 1.3.6.1.4.1.2011.5.25.316.3.12 | |||
notification · current A hwIpfpmMultiTwoDelayExceed trap is sent when the two-way delay of IPFPM test instance exceeds the uppper threshold in continuous five test intervals. This trap supports multi two-way delay for a period.
| ||||
| !hwIpfpmMultiTwoDelayRecovery | 1.3.6.1.4.1.2011.5.25.316.3.13 | |||
notification · current A hwIpfpmMultiTwoDelayRecovery trap is sent when the two-way delay of IPFPM test instance is under the lower threshold in continuous five test intervals. This trap supports multi two-way delay for a period.
| ||||
| !hwIpfpmStreamResourceExceed | 1.3.6.1.4.1.2011.5.25.316.3.14 | |||
notification · current A hwIpfpmStreamResourceExceed trap is sent when the SIPFPM stream number exceeds the upper threshold. | ||||
| !hwIpfpmStreamResourceRecovery | 1.3.6.1.4.1.2011.5.25.316.3.15 | |||
notification · current A hwIpfpmStreamResourceRecovery trap is sent when the SIPFPM stream number is lower than the upper threshold. | ||||
| !hwIpfpmBoardStreamResourceExceed | 1.3.6.1.4.1.2011.5.25.316.3.16 | |||
notification · current A hwIpfpmBoardStreamResourceExceed trap is sent when the SIPFPM stream number on the board exceeds the upper threshold. | ||||
| !hwIpfpmBoardStreamResourceRecovery | 1.3.6.1.4.1.2011.5.25.316.3.17 | |||
notification · current A hwIpfpmBoardStreamResourceRecovery trap is sent when the SIPFPM stream number on the board is lower than the upper threshold. | ||||
| !hwIpfpmBoardPktDscpConflict | 1.3.6.1.4.1.2011.5.25.316.3.18 | |||
notification · current A hwIpfpmBoardPktDscpConflict trap is sent when the DSCP value of the packets matching the SIPFPM measurement flow on the card conflicts with the configured SIPFPM color bit. | ||||
| !hwIpfpmBoardStreamCreateFail | 1.3.6.1.4.1.2011.5.25.316.3.19 | |||
notification · current A hwIpfpmBoardStreamCreateFail trap is sent when failing to create an SIPFPM flow entry on the card. | ||||
| !hwIpfpmBoardAclResourceExceed | 1.3.6.1.4.1.2011.5.25.316.3.20 | |||
notification · current A hwIpfpmBoardAclResourceExceed trap is sent when the number of ACL resources used by SIPFPM on the card exceeds the threshold. | ||||
| NhwIpfpmConformance | 1.3.6.1.4.1.2011.5.25.316.4 | |||
| NhwIpfpmCompliances | 1.3.6.1.4.1.2011.5.25.316.4.1 | |||
| MhwIpfpmCompliance | 1.3.6.1.4.1.2011.5.25.316.4.1.1 | |||
compliance · current The compliance statement for entities which implement the IPFPM MIB. | ||||
| NhwIpfpmGroups | 1.3.6.1.4.1.2011.5.25.316.4.2 | |||
| GhwIpfpmMcpConfigGroup | 1.3.6.1.4.1.2011.5.25.316.4.2.1 | |||
group · current The collection of objects which are used to configure the IPFPM MCP behavior. | ||||
| GhwIpfpmMcpInstConfigGroup | 1.3.6.1.4.1.2011.5.25.316.4.2.2 | |||
group · current The collection of objects which are used to configure the IPFPM MCP test instance behavior.
| ||||
| GhwIpfpmMcpStatsGroup | 1.3.6.1.4.1.2011.5.25.316.4.2.3 | |||
group · current The collection of objects which are used to represent the IPFPM test instance statistics.
| ||||
| GhwIpfpmDcpConfigGroup | 1.3.6.1.4.1.2011.5.25.316.4.2.4 | |||
group · current The collection of objects which are used to configure the IPFPM DCP behavior. | ||||
| GhwIpfpmDcpInstConfigGroup | 1.3.6.1.4.1.2011.5.25.316.4.2.5 | |||
group · current The collection of objects which are used to configure the IPFPM DCP test instance behavior.
| ||||
| GhwIpfpmDcpTlpConfigGroup | 1.3.6.1.4.1.2011.5.25.316.4.2.6 | |||
group · current The collection of objects which are used to configure the IPFPM TLP behavior. | ||||
| GhwIpfpmTrapsGroup | 1.3.6.1.4.1.2011.5.25.316.4.2.7 | |||
group · current The collection of traps used to indicate that the measured network performance is in fault or not.
| ||||
| GhwIpfpmMcpMultiDelayStatsGroup | 1.3.6.1.4.1.2011.5.25.316.4.2.8 | |||
group · current The collection of objects which are used to represent the IPFPM test instance statistics for multi-in-point delay measurement
| ||||
Textual conventions
HWEnabledStatusINTEGERdisabled(2)enabled(1)This TC describes that the status of some function is enabled or disabled.
HWIpfpmAuthTypeINTEGERhmac-sha256(1)This TC describes the type of IPFPM authentication.
HWIpfpmClockSoureINTEGERdefault(0)ntp(1)This TC describes the type of ClockSoure. The value 'ntp' represents using ntp.
HWIpfpmDelayMeasTypeINTEGERnull(0)oneway(1)twoway(2)This TC describes the type of delay measure of an test instance.
HWIpfpmDelayTlpRoleINTEGERe2e(1)section(2)This TC describes the TLP point in delay measure.
HWIpfpmFlowTlpDirecINTEGERegress(2)ingress(1)This TC describes the role of flow TLP in the measurement network.
HWIpfpmFlowTypeINTEGERbackward(2)bidirectional(3)forward(1)forwardandbackward(4)null(0)This TC describes the type of flow in an test instance.
HWIpfpmInstIntervalTypeINTEGERinterval10s(10)interval1s(1)interval600s(600)interval60s(60)This TC describes the interval type of an test instance.
HWIpfpmInstTypeINTEGERmulticastrecv(2)multicastsrc(1)unicast(0)This TC describes the type of an test instance.
HWIpfpmLossTlpRoleINTEGERe2e(1)section(2)This TC describes the TLP point in loss measure.
HWIpfpmMMSTypeINTEGERmaster(0)slave(1)This TC describes the type of multicastsrc.
HWIpfpmMcpFlowTypeINTEGERbackward(2)bidirectional(3)forward(1)none(0)This TC describes the type of flow in an test instance.
HWIpfpmMcpTlpRoleINTEGERin-group(1)out-group(2)This TC describes the role of TLP in the ACH.
HWIpfpmMeasTimeRangeTypeINTEGERnull(0)timerange10m(10)timerange15m(15)timerange30m(30)timerange5m(5)This TC describes the type of on-demand loss or delay measure of an test instance.
HWIpfpmMeasureFlagINTEGERflagsBit0(1)tosBit3(2)tosBit4(3)tosBit5(4)tosBit6(5)tosBit7(6)This TC describes the optional bit of an IP packet for IPFPM measurement.
HWIpfpmStatErrInfoINTEGERasynClock(5)errDelayVariationBackward(18)errDelayVariationBidirection(19)errDelayVariationForward(17)errFlowDataBackward(13)errFlowDataBidirection(14)errFlowDataForward(12)errMultiSourceSwitch(20)incompleteDataBackward(7)incompleteDataBidirection(8)incompleteDataForward(6)inconsistInterval(4)initialIntervalBackward(2)initialIntervalBidirection(3)initialIntervalForward(1)multiDataOneDelay(15)multiDataTwoDelay(16)noErr(0)noFlowDataBackward(10)noFlowDataBidirection(11)noFlowDataForward(9)unknownErr(21)This TC describes whether the statistics data is invalid or not and the reason of invalidation.
HWIpfpmTlpRoleINTEGERin-point(1)mid-point(3)out-point(2)This TC describes the TLP point.
HWIpfpmTlpRoleIndexINTEGERmid-point(3)This TC describes the TLP midpoint.
HWIpfpmVpnTypeINTEGERmanage-vpn(1)none(0)vpn-instance(2)This TC describes the type of VPN. The value 'none' represents the public network, the value 'manage-vpn' represents the net-mange VPN. and the value 'vpn-instance' represents the normal VPN instance.
Traps / Notifications
- hwIpfpmBoardAclResourceExceed
1.3.6.1.4.1.2011.5.25.316.3.20 - hwIpfpmBoardPktDscpConflict
1.3.6.1.4.1.2011.5.25.316.3.18 - hwIpfpmBoardStreamCreateFail
1.3.6.1.4.1.2011.5.25.316.3.19 - hwIpfpmBoardStreamResourceExceed
1.3.6.1.4.1.2011.5.25.316.3.16 - hwIpfpmBoardStreamResourceRecovery
1.3.6.1.4.1.2011.5.25.316.3.17 - hwIpfpmDcpFlowConflict
1.3.6.1.4.1.2011.5.25.316.3.7 - hwIpfpmLossRatioExceed
1.3.6.1.4.1.2011.5.25.316.3.1 - hwIpfpmLossRatioRecovery
1.3.6.1.4.1.2011.5.25.316.3.2 - hwIpfpmMultiOneDelayExceed
1.3.6.1.4.1.2011.5.25.316.3.10 - hwIpfpmMultiOneDelayRecovery
1.3.6.1.4.1.2011.5.25.316.3.11 - hwIpfpmMultiTwoDelayExceed
1.3.6.1.4.1.2011.5.25.316.3.12 - hwIpfpmMultiTwoDelayRecovery
1.3.6.1.4.1.2011.5.25.316.3.13 - hwIpfpmOneDelayExceed
1.3.6.1.4.1.2011.5.25.316.3.3 - hwIpfpmOneDelayRecovery
1.3.6.1.4.1.2011.5.25.316.3.4 - hwIpfpmStreamResourceExceed
1.3.6.1.4.1.2011.5.25.316.3.14 - hwIpfpmStreamResourceRecovery
1.3.6.1.4.1.2011.5.25.316.3.15 - hwIpfpmTlpExceed
1.3.6.1.4.1.2011.5.25.316.3.8 - hwIpfpmTlpRecovery
1.3.6.1.4.1.2011.5.25.316.3.9 - hwIpfpmTwoDelayExceed
1.3.6.1.4.1.2011.5.25.316.3.5 - hwIpfpmTwoDelayRecovery
1.3.6.1.4.1.2011.5.25.316.3.6