HUAWEI-IMA-MIB
HUAWEI Technology Co.,LtdThe MIB is mainly used to configure Inverse Multiplexing for ATM (IMA) interfaces.
snmptranslate -m HUAWEI-IMA-MIB -Tpsnmpwalk -v2c -c <community> -m HUAWEI-IMA-MIB <host> 1.3.6.1.4.1.2011.5.25.176Imports
| HUAWEI-MIB | hwDatacomm |
|---|---|
| IF-MIB | InterfaceIndex, InterfaceIndexOrZero, ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IhwImaMIB | 1.3.6.1.4.1.2011.5.25.176 | |||
identity The MIB is mainly used to configure Inverse Multiplexing for ATM (IMA) interfaces. | ||||
| NhwImaMibObjects | 1.3.6.1.4.1.2011.5.25.176.1 | |||
| ThwImaGroupTable | 1.3.6.1.4.1.2011.5.25.176.1.1 | NA | ||
table · not-accessible · current The IMA Group Configuration table. | ||||
| RhwImaGroupEntry | 1.3.6.1.4.1.2011.5.25.176.1.1.1 | NA | ||
| ChwImaGroupIfIndex | 1.3.6.1.4.1.2011.5.25.176.1.1.1.1 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current This object identifies the logical interface number ('ifIndex')
assigned to this IMA group, and is used to identify corresponding
rows in the Interfaces MIB.
Note that re-initialization of the management agent may cause
a client's 'hwImaGroupIfIndex' to change. | ||||
| ChwImaGroupNeState | 1.3.6.1.4.1.2011.5.25.176.1.1.1.2 | ImaGroupState | RO | |
column · ImaGroupState · read-only · current The current operational state of the near-end IMA Group State Machine. | ||||
| ChwImaGroupFeState | 1.3.6.1.4.1.2011.5.25.176.1.1.1.3 | ImaGroupState | RO | |
column · ImaGroupState · read-only · current The current operational state of the far-end IMA Group State Machine. | ||||
| ChwImaGroupSymmetry | 1.3.6.1.4.1.2011.5.25.176.1.1.1.4 | ImaGroupSymmetry | RO | |
column · ImaGroupSymmetry · read-only · current Symmetry of the IMA group. | ||||
| ChwImaGroupMinNumTxLinks | 1.3.6.1.4.1.2011.5.25.176.1.1.1.5 | Integer32 (1..32) | RC | |
column · Integer32 (1..32) · read-create · current Minimum number of transmit links required to be Active for the IMA group to be in the Operational state. | ||||
| ChwImaGroupMinNumRxLinks | 1.3.6.1.4.1.2011.5.25.176.1.1.1.6 | Integer32 (1..32) | RC | |
column · Integer32 (1..32) · read-create · current Minimum number of receive links required to be Active for the IMA group to be in the Operational state. | ||||
| ChwImaGroupTxTimingRefLink | 1.3.6.1.4.1.2011.5.25.176.1.1.1.7 | InterfaceIndexOrZero | RO | |
column · InterfaceIndexOrZero · read-only · current The ifIndex of the transmit timing reference link to be used by the near-end for IMA data cell clock recovery from the ATM layer. The distinguished value of zero may be used if no link has been configured in the IMA group, or if the transmit timing reference link has not yet been selected. | ||||
| ChwImaGroupRxTimingRefLink | 1.3.6.1.4.1.2011.5.25.176.1.1.1.8 | InterfaceIndexOrZero | RO | |
column · InterfaceIndexOrZero · read-only · current The ifIndex of the receive timing reference link to be used by near-end for IMA data cell clock recovery toward the ATM layer. The distinguished value of zero may be used if no link has been configured in the IMA group, or if the receive timing reference link has not yet been detected. | ||||
| ChwImaGroupTxImaId | 1.3.6.1.4.1.2011.5.25.176.1.1.1.9 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current The IMA ID currently in use by the near-end IMA function. | ||||
| ChwImaGroupRxImaId | 1.3.6.1.4.1.2011.5.25.176.1.1.1.10 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current The IMA ID currently in use by the far-end IMA function. | ||||
| ChwImaGroupTxFrameLength | 1.3.6.1.4.1.2011.5.25.176.1.1.1.11 | ImaFrameLength | RC | |
column · ImaFrameLength · read-create · current The frame length to be used by the IMA group in the transmit direction. Can only be set when the IMA group is startup. | ||||
| ChwImaGroupRxFrameLength | 1.3.6.1.4.1.2011.5.25.176.1.1.1.12 | ImaFrameLength | RO | |
column · ImaFrameLength · read-only · current Value of IMA frame length as received from remote IMA function. | ||||
| ChwImaGroupDiffDelayMax | 1.3.6.1.4.1.2011.5.25.176.1.1.1.13 | MilliSeconds (25..120) | RC | |
column · MilliSeconds (25..120) · read-create · current The maximum number of milliseconds of differential delay among the links that will be tolerated on this interface. | ||||
| ChwImaGroupAlphaValue | 1.3.6.1.4.1.2011.5.25.176.1.1.1.14 | Integer32 (1..2) | RO | |
column · Integer32 (1..2) · read-only · current This indicates the 'alpha' value used to specify the number of consecutive invalid ICP cells to be detected before moving to the IMA Hunt state from the IMA Sync state. | ||||
| ChwImaGroupBetaValue | 1.3.6.1.4.1.2011.5.25.176.1.1.1.15 | Integer32 (1..5) | RO | |
column · Integer32 (1..5) · read-only · current This indicates the 'beta' value used to specify the number of consecutive errored ICP cells to be detected before moving to the IMA Hunt state from the IMA Sync state. | ||||
| ChwImaGroupGammaValue | 1.3.6.1.4.1.2011.5.25.176.1.1.1.16 | Integer32 (1..5) | RO | |
column · Integer32 (1..5) · read-only · current This indicates the 'gamma' value used to specify the number of consecutive valid ICP cells to be detected before moving to the IMA Sync state from the IMA PreSync state. | ||||
| ChwImaGroupNumTxActLinks | 1.3.6.1.4.1.2011.5.25.176.1.1.1.17 | Gauge32 | RO | |
column · Gauge32 · read-only · current The number of links which are configured to transmit and are currently Active in this IMA group. | ||||
| ChwImaGroupNumRxActLinks | 1.3.6.1.4.1.2011.5.25.176.1.1.1.18 | Gauge32 | RO | |
column · Gauge32 · read-only · current The number of links which are configured to receive and are currently Active in this IMA group. | ||||
| ChwImaGroupTxOamLabelValue | 1.3.6.1.4.1.2011.5.25.176.1.1.1.19 | Integer32 (1..255) | RO | |
column · Integer32 (1..255) · read-only · current IMA OAM Label value transmitted by the NE IMA unit. | ||||
| ChwImaGroupRxOamLabelValue | 1.3.6.1.4.1.2011.5.25.176.1.1.1.20 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current IMA OAM Label value transmitted by the FE IMA unit. The value 0 likely means that the IMA unit has not received an OAM Label from the FE IMA unit at this time. | ||||
| ChwImaGroupFirstLinkIfIndex | 1.3.6.1.4.1.2011.5.25.176.1.1.1.21 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current This object identifies the first link of this IMA Group. | ||||
| ChwImaGroupName | 1.3.6.1.4.1.2011.5.25.176.1.1.1.22 | OCTET STRING | AN | |
column · OCTET STRING · accessible-for-notify · current The name of interface ImaGroup. | ||||
| ChwImaGroupTxClock | 1.3.6.1.4.1.2011.5.25.176.1.1.1.23 | Integer32 (1..2) | RC | |
column · Integer32 (1..2) · read-create · current The clock mode to be used by the IMA group in the transmit direction. | ||||
| ChwImaGroupRxClock | 1.3.6.1.4.1.2011.5.25.176.1.1.1.24 | Integer32 (1..2) | RO | |
column · Integer32 (1..2) · read-only · current Mode of IMA clock as received from remote IMA function. | ||||
| ThwImaLinkTable | 1.3.6.1.4.1.2011.5.25.176.1.2 | NA | ||
table · not-accessible · current The IMA group Link Status and Configuration table. | ||||
| RhwImaLinkEntry | 1.3.6.1.4.1.2011.5.25.176.1.2.1 | NA | ||
| ChwImaLinkIfIndex | 1.3.6.1.4.1.2011.5.25.176.1.2.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current This corresponds to the 'ifIndex' of the MIB-II interface
on which this link is established. This object also
corresponds to the logical number ('ifIndex') assigned to
this IMA link. | ||||
| ChwImaLinkGroupIfIndex | 1.3.6.1.4.1.2011.5.25.176.1.2.1.2 | InterfaceIndex | RC | |
column · InterfaceIndex · read-create · current This object identifies the logical interface number ('ifIndex')
assigned to this IMA group. The specified link will be bound to
this IMA group. | ||||
| ChwImaLinkNeTxState | 1.3.6.1.4.1.2011.5.25.176.1.2.1.3 | ImaLinkState | RO | |
column · ImaLinkState · read-only · current The current state of the near-end transmit link. | ||||
| ChwImaLinkNeRxState | 1.3.6.1.4.1.2011.5.25.176.1.2.1.4 | ImaLinkState | RO | |
column · ImaLinkState · read-only · current The current state of the near-end receive link. | ||||
| ChwImaLinkFeTxState | 1.3.6.1.4.1.2011.5.25.176.1.2.1.5 | ImaLinkState | RO | |
column · ImaLinkState · read-only · current The current state of the far-end transmit link as reported via ICP cells. | ||||
| ChwImaLinkFeRxState | 1.3.6.1.4.1.2011.5.25.176.1.2.1.6 | ImaLinkState | RO | |
column · ImaLinkState · read-only · current The current state of the far-end receive link as reported via ICP cells. | ||||
| ChwImaLinkRowStatus | 1.3.6.1.4.1.2011.5.25.176.1.2.1.51 | RowStatus | RC | |
column · RowStatus · read-create · current The hwImaLinkRowStatus object allows create, change, and delete operations on hwImaLinkTable entries. To create a new conceptual row (or instance) of the hwImaLinkTable, hwImaLinkRowStatus must be set to 'createAndWait' or 'createAndGo'. A successful set of the imaLinkGroupIndex object must be performed before the hwImaLinkRowStatus of a new conceptual row can be set to 'active'. To change (modify) the imaLinkGroupIndex in an hwImaLinkTable entry, the hwImaLinkRowStatus object must first be set to 'notInService'. Only then can this object in the conceptual row be modified. This is due to the fact that the imaLinkGroupIndex object provides the association between a physical IMA link and the IMA group to which it belongs, and setting the imaLinkGroupIndex object to a different value has the effect of changing the association between a physical IMA link and an IMA group. To place the link 'in group', the hwImaLinkRowStatus object is set to 'active'. While the row is not in 'active' state, both the Transmit and Receive IMA link state machines are in the 'Not In Group' state. To remove (delete) an hwImaLinkTable entry from this table, set this object to 'destroy'. | ||||
| ChwImaLinkName | 1.3.6.1.4.1.2011.5.25.176.1.2.1.52 | OCTET STRING | AN | |
column · OCTET STRING · accessible-for-notify · current Description. | ||||
| ThwImaAlarmTable | 1.3.6.1.4.1.2011.5.25.176.1.3 | NA | ||
table · not-accessible · current Description. | ||||
| RhwImaAlarmEntry | 1.3.6.1.4.1.2011.5.25.176.1.3.1 | NA | ||
| ChwImaAlarmIfIndex | 1.3.6.1.4.1.2011.5.25.176.1.3.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current Description. | ||||
| ChwImaGroupNeDownEn | 1.3.6.1.4.1.2011.5.25.176.1.3.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current Description. | ||||
| ChwImaGroupFeDownEn | 1.3.6.1.4.1.2011.5.25.176.1.3.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current Description. | ||||
| ChwImaGroupTxClkMismatchEn | 1.3.6.1.4.1.2011.5.25.176.1.3.1.4 | Integer32 | RW | |
column · Integer32 · read-write · current Description. | ||||
| ChwImaLinkLifEn | 1.3.6.1.4.1.2011.5.25.176.1.3.1.5 | Integer32 | RW | |
column · Integer32 · read-write · current Description. | ||||
| ChwImaLinkLodsEn | 1.3.6.1.4.1.2011.5.25.176.1.3.1.6 | Integer32 | RW | |
column · Integer32 · read-write · current Description. | ||||
| ChwImaLinkRfiEn | 1.3.6.1.4.1.2011.5.25.176.1.3.1.7 | Integer32 | RW | |
column · Integer32 · read-write · current Description. | ||||
| ChwImaLinkFeTxUnusableEn | 1.3.6.1.4.1.2011.5.25.176.1.3.1.8 | Integer32 | RW | |
column · Integer32 · read-write · current Description. | ||||
| ChwImaLinkFeRxUnusableEn | 1.3.6.1.4.1.2011.5.25.176.1.3.1.9 | Integer32 | RW | |
column · Integer32 · read-write · current Description. | ||||
| ChwIMAAllEn | 1.3.6.1.4.1.2011.5.25.176.1.3.1.10 | Integer32 | RW | |
column · Integer32 · read-write · current Description. | ||||
| NhwImaMibConformance | 1.3.6.1.4.1.2011.5.25.176.2 | |||
| NhwImaMibGroups | 1.3.6.1.4.1.2011.5.25.176.2.1 | |||
| GhwImaGroupGroup | 1.3.6.1.4.1.2011.5.25.176.2.1.1 | |||
group · current A set of objects providing configuration and status information for an IMA group definition.
| ||||
| GhwImaLinkGroup | 1.3.6.1.4.1.2011.5.25.176.2.1.2 | |||
group · current A set of objects providing status information for an IMA link. | ||||
| GhwImaGroupAlarmTrapGroup | 1.3.6.1.4.1.2011.5.25.176.2.1.3 | |||
group · current A set of NOTIFICATION providing alarm information for an IMA group. | ||||
| GhwImaLinkAlarmTrapGroup | 1.3.6.1.4.1.2011.5.25.176.2.1.4 | |||
group · current A set of NOTIFICATION providing alarm information for an IMA link. | ||||
| NhwImaMibCompliances | 1.3.6.1.4.1.2011.5.25.176.2.2 | |||
| MhwImaMibCompliance | 1.3.6.1.4.1.2011.5.25.176.2.2.1 | |||
compliance · current The compliance statement for network elements implementing Inverse Multiplexing for ATM (IMA) interfaces.
| ||||
| NhwImaNotifications | 1.3.6.1.4.1.2011.5.25.176.3 | |||
| !hwImaGroupNeDownAlarm | 1.3.6.1.4.1.2011.5.25.176.3.1 | |||
| !hwImaGroupNeDownAlarmResume | 1.3.6.1.4.1.2011.5.25.176.3.2 | |||
notification · current This object indicates that the alarm for the near-end IMA group failure is cleared.
| ||||
| !hwImaGroupFeDownAlarm | 1.3.6.1.4.1.2011.5.25.176.3.3 | |||
| !hwImaGroupFeDownAlarmResume | 1.3.6.1.4.1.2011.5.25.176.3.4 | |||
notification · current This object indicates that the alarm for the far-end IMA group failure is cleared.
| ||||
| !hwImaGroupTxClkMismatch | 1.3.6.1.4.1.2011.5.25.176.3.5 | |||
notification · current This object indicates that an alarm is generated when the transmit clock modes at the two ends of the IMA group do not match.
| ||||
| !hwImaGroupTxClkMismatchResume | 1.3.6.1.4.1.2011.5.25.176.3.6 | |||
notification · current This object indicates that the alarm generated when the transmit clock modes at the two ends of the IMA group did not match is cleared.
| ||||
| !hwImaLinkLifAlarm | 1.3.6.1.4.1.2011.5.25.176.3.7 | |||
notification · current This object indicates that an alarm is generated when out of frame (OOF) occurs on an IMA link.
| ||||
| !hwImaLinkLifAlarmResume | 1.3.6.1.4.1.2011.5.25.176.3.8 | |||
notification · current This object indicates that the alarm generated for OOF on the IMA link is cleared.
| ||||
| !hwImaLinkLodsAlarm | 1.3.6.1.4.1.2011.5.25.176.3.9 | |||
notification · current This object indicates that an alarm is generated when the differentiated delay on an IMA link exceeds the upper threshold.
| ||||
| !hwImaLinkLodsAlarmResume | 1.3.6.1.4.1.2011.5.25.176.3.10 | |||
notification · current This object indicates that the alarm generated when the differentiated delay on the IMA link exceeded the upper threshold is cleared.
| ||||
| !hwImaLinkRfiAlarm | 1.3.6.1.4.1.2011.5.25.176.3.11 | |||
notification · current This object indicates that an alarm is generated when the far-end IMA link fails.
| ||||
| !hwImaLinkRfiAlarmResume | 1.3.6.1.4.1.2011.5.25.176.3.12 | |||
notification · current This object indicates that the alarm generated for the far-end IMA link failure is cleared.
| ||||
| !hwImaLinkFeTxUnusableAlarm | 1.3.6.1.4.1.2011.5.25.176.3.13 | |||
notification · current This object indicates that an alarm is generated when the IMA transmit link at the far end goes abnormal.
| ||||
| !hwImaLinkFeTxUnusableAlarmResume | 1.3.6.1.4.1.2011.5.25.176.3.14 | |||
notification · current This object indicates that the alarm generated for the abnormal IMA transmit link at the far end is cleared.
| ||||
| !hwImaLinkFeRxUnusableAlarm | 1.3.6.1.4.1.2011.5.25.176.3.15 | |||
notification · current This object indicates that an alarm is generated when the IMA receive link at the far end goes abnormal.
| ||||
| !hwImaLinkFeRxUnusableAlarmResume | 1.3.6.1.4.1.2011.5.25.176.3.16 | |||
notification · current This object indicates that the alarm generated for the abnormal IMA receive link at the far end is cleared.
| ||||
Textual conventions
ImaFrameLengthINTEGERm128(3)m256(4)m32(1)m64(2)Length of the IMA frames.
ImaGroupStateINTEGERblocked(8)configAbortIncompatibleSymmetry(5)configAbortOther(6)configAbortUnsupportedImaVersion(10)configAbortUnsupportedM(4)insufficientLinks(7)notConfigured(1)operational(9)startUp(2)startUpAck(3)State of the IMA group.
ImaGroupSymmetryINTEGERasymmetricConfiguration(3)asymmetricOperation(2)symmetricOperation(1)The group symmetry mode adjusted during the group start-up.
ImaLinkStateINTEGERactive(8)notInGroup(1)unusableFailed(6)unusableFault(3)unusableInhibited(5)unusableMisconnected(4)unusableNoGivenReason(2)usable(7)State of a link belonging to an IMA group.
MilliSecondsInteger32Time in milliseconds
Traps / Notifications
- hwImaGroupFeDownAlarm
1.3.6.1.4.1.2011.5.25.176.3.3 - hwImaGroupFeDownAlarmResume
1.3.6.1.4.1.2011.5.25.176.3.4 - hwImaGroupNeDownAlarm
1.3.6.1.4.1.2011.5.25.176.3.1 - hwImaGroupNeDownAlarmResume
1.3.6.1.4.1.2011.5.25.176.3.2 - hwImaGroupTxClkMismatch
1.3.6.1.4.1.2011.5.25.176.3.5 - hwImaGroupTxClkMismatchResume
1.3.6.1.4.1.2011.5.25.176.3.6 - hwImaLinkFeRxUnusableAlarm
1.3.6.1.4.1.2011.5.25.176.3.15 - hwImaLinkFeRxUnusableAlarmResume
1.3.6.1.4.1.2011.5.25.176.3.16 - hwImaLinkFeTxUnusableAlarm
1.3.6.1.4.1.2011.5.25.176.3.13 - hwImaLinkFeTxUnusableAlarmResume
1.3.6.1.4.1.2011.5.25.176.3.14 - hwImaLinkLifAlarm
1.3.6.1.4.1.2011.5.25.176.3.7 - hwImaLinkLifAlarmResume
1.3.6.1.4.1.2011.5.25.176.3.8 - hwImaLinkLodsAlarm
1.3.6.1.4.1.2011.5.25.176.3.9 - hwImaLinkLodsAlarmResume
1.3.6.1.4.1.2011.5.25.176.3.10 - hwImaLinkRfiAlarm
1.3.6.1.4.1.2011.5.25.176.3.11 - hwImaLinkRfiAlarmResume
1.3.6.1.4.1.2011.5.25.176.3.12