HUAWEI-HGMP-MIB
HUAWEI Technology Co.,LtdHUAWEI-HGMP-MIB is defined and owned by Huawei. This MIB includes four parts: the cluster, stack, Neighbor Discovery Protocol (NDP), and Network Topology Discovery Protocol (NTDP). This MIB can monitor the cluster, stack and topology collection.
snmptranslate -m HUAWEI-HGMP-MIB -Tpsnmpwalk -v2c -c <community> -m HUAWEI-HGMP-MIB <host> 1.3.6.1.4.1.2011.6.7Imports
| HUAWEI-MIB | huaweiUtility |
|---|---|
| P-BRIDGE-MIB | EnabledStatus |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IhwCluster | 1.3.6.1.4.1.2011.6.7 | |||
identity HUAWEI-HGMP-MIB is defined and owned by Huawei. This MIB includes four parts: the cluster, stack, Neighbor Discovery Protocol (NDP), and Network Topology Discovery Protocol (NTDP). This MIB can monitor the cluster, stack and topology collection. | ||||
| NhwClusterObject | 1.3.6.1.4.1.2011.6.7.1 | |||
| NhgmpEventsV2 | 1.3.6.1.4.1.2011.6.7.1.0 | |||
| !hgmpMemberfailure | 1.3.6.1.4.1.2011.6.7.1.0.1 | |||
notification · current When a cluster member failed, send an SNMP trap to the network manager.
| ||||
| !hgmpMemberRecover | 1.3.6.1.4.1.2011.6.7.1.0.2 | |||
notification · current When a cluster member recovered, send an SNMP trap to the network manager.
| ||||
| !hgmpMemberStatusChange | 1.3.6.1.4.1.2011.6.7.1.0.3 | |||
notification · current When a cluster member status changed, send an SNMP trap to the network manager. | ||||
| !hgmpNetTopChange | 1.3.6.1.4.1.2011.6.7.1.0.4 | |||
notification · current When net topology of this cluster change, send a snmp trap to the network management.
| ||||
| !hgmpMemberAdd | 1.3.6.1.4.1.2011.6.7.1.0.6 | |||
notification · current When a cluster member added, send an SNMP trap to the network manager.
| ||||
| ShgmpSetVLANSecurity | 1.3.6.1.4.1.2011.6.7.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Configure whether to perform the VLAN check inside the cluster. The default value is noSecurity(0).
| ||||
| ShgmpHandShakeInterval | 1.3.6.1.4.1.2011.6.7.1.2 | Integer32 (1..255) | RW | |
scalar · Integer32 (1..255) · read-write · current Handshaking interval of the cluster member switches. The default value is 10. | ||||
| ShgmpHandShakeHoldtime | 1.3.6.1.4.1.2011.6.7.1.3 | Integer32 (1..255) | RW | |
scalar · Integer32 (1..255) · read-write · current Holdtime of command switch and member switch in the cluster. The default value is 60. | ||||
| ShgmpGrpMemberTableChange | 1.3.6.1.4.1.2011.6.7.1.4 | Integer32 (0..65535) | RO | |
scalar · Integer32 (0..65535) · read-only · current Add 1 to the member list after it changes. The administrator checks if the value has changed. If not, it will not read the list once more. The default value is 0. | ||||
| ShgmpMemberDisconRate | 1.3.6.1.4.1.2011.6.7.1.5 | Integer32 | RO | |
scalar · Integer32 · read-only · current Disconnection times of the member and command switches divided by member number times 1000. The default value is 0. | ||||
| ShgmpCmdLanswitchFlag | 1.3.6.1.4.1.2011.6.7.1.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Command switch flag. The default value is false(0). If the value is set to 1, the cluster name is 'huawei' by default.
| ||||
| ShgmpCmdClusterName | 1.3.6.1.4.1.2011.6.7.1.7 | OCTET STRING (SIZE (0..8)) | RW | |
scalar · OCTET STRING (SIZE (0..8)) · read-write · current Cluster name of the command switch. | ||||
| ShgmpMngPriIpSegCMIP | 1.3.6.1.4.1.2011.6.7.1.8 | IpAddress | RW | |
scalar · IpAddress · read-write · current The private management IP address of the command switch, which cannot be modified after the cluster has been created. The default value is '0.0.0.0'. | ||||
| ShgmpMngPriIpMask | 1.3.6.1.4.1.2011.6.7.1.9 | IpAddress | RW | |
scalar · IpAddress · read-write · current The private management IP address mask assigned by the command switch, which cannot be modified after the cluster has been created. The default value is '0.0.0.0'. | ||||
| ShgmpFtpServer | 1.3.6.1.4.1.2011.6.7.1.10 | IpAddress | RW | |
scalar · IpAddress · read-write · current The cluster members can access the FTP Server through the command switch, which can only be configured and accessed on the command switch. The default value is '0.0.0.0'. | ||||
| ShgmpTftpServer | 1.3.6.1.4.1.2011.6.7.1.11 | IpAddress | RW | |
scalar · IpAddress · read-write · current The cluster members can access the TFTP Server through the command switch, which can only be configured and accessed on the command switch. The default value is '0.0.0.0'. | ||||
| ShgmpSnmpHost | 1.3.6.1.4.1.2011.6.7.1.12 | IpAddress | RW | |
scalar · IpAddress · read-write · current The Snmp Host to send the cluster trap packets, which can only be configured and accessed on the command switch. The default value is '0.0.0.0'. | ||||
| ShgmpLogHost | 1.3.6.1.4.1.2011.6.7.1.13 | IpAddress | RW | |
scalar · IpAddress · read-write · current Log host of the cluster, which can only be configured and accessed on the command switch. The default value is '0.0.0.0'. | ||||
| ThgmpGrpMemberTable | 1.3.6.1.4.1.2011.6.7.1.14 | NA | ||
table · not-accessible · current Table of cluster member switches. | ||||
| RhgmpGrpMemberEntry | 1.3.6.1.4.1.2011.6.7.1.14.1 | NA | ||
row · not-accessible · current Provides information about cluster member entry. | ||||
| ChgmpGrpMemberDeviceId | 1.3.6.1.4.1.2011.6.7.1.14.1.1 | OCTET STRING (SIZE (0..10)) | RO | |
column · OCTET STRING (SIZE (0..10)) · read-only · current 2 bytes address type of the member switch + 2 bytes /0 + MAC address, comprising a character string of hexadecimal numbers. | ||||
| ChgmpGrpMemberSerial | 1.3.6.1.4.1.2011.6.7.1.14.1.2 | Integer32 (0..2047) | RO | |
column · Integer32 (0..2047) · read-only · current When adding member switch to the cluster, the command switch will assign an unique integer to identify it. | ||||
| ChgmpGrpMemberIpAddr | 1.3.6.1.4.1.2011.6.7.1.14.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The private IP addresses of the member switches for communication inside the cluster. | ||||
| ChgmpGrpMemberName | 1.3.6.1.4.1.2011.6.7.1.14.1.4 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current Hostname of the member switch. | ||||
| ChgmpGrpMemberPassword | 1.3.6.1.4.1.2011.6.7.1.14.1.5 | OCTET STRING (SIZE (0..16)) | RW | |
column · OCTET STRING (SIZE (0..16)) · read-write · current Member password for joining a cluster. | ||||
| ChgmpGrpMemberPlatform | 1.3.6.1.4.1.2011.6.7.1.14.1.6 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Set the hardware platform. A null string indicates the information does not exist in the device adjacency table. | ||||
| ChgmpGrpMemberStatus | 1.3.6.1.4.1.2011.6.7.1.14.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Member status on the command switch, used for displaying the network management status.
| ||||
| ChgmpGrpMemberDisconCount | 1.3.6.1.4.1.2011.6.7.1.14.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current Count of inside communication disconnections between the member switch and the command switch. | ||||
| ChgmpGrpMemberEnrollTime | 1.3.6.1.4.1.2011.6.7.1.14.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current Enrollment time of the member, measured in seconds. | ||||
| ChgmpGrpMemberOperate | 1.3.6.1.4.1.2011.6.7.1.14.1.10 | RowStatus | RW | |
column · RowStatus · read-write · current Operation indication field, indicating the operation of adding/removing a member by the network management agent and the status of current line. | ||||
| ThgmpMemberResetTable | 1.3.6.1.4.1.2011.6.7.1.15 | NA | ||
table · not-accessible · current Reset a member switch in the cluster. | ||||
| RhgmpMemberResetEntry | 1.3.6.1.4.1.2011.6.7.1.15.1 | NA | ||
row · not-accessible · current Provides information about resetting member entry.
| ||||
| ChgmpMemberResetMAC | 1.3.6.1.4.1.2011.6.7.1.15.1.1 | MacAddress | RO | |
column · MacAddress · read-only · current The management MAC address of the switch to be reset, which is the unique identifier of the switch. | ||||
| ChgmpMemberEraseflash | 1.3.6.1.4.1.2011.6.7.1.15.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Whether to erase the configuration file from the flash after resetting a switch. When this node is read, cannotget(65535) will be returned.
| ||||
| ShgmpClusterRole | 1.3.6.1.4.1.2011.6.7.1.16 | INTEGER | RO | |
scalar · INTEGER · read-only · current Role of this switch in a cluster.
| ||||
| ShgmpClusterMaxPoolNum | 1.3.6.1.4.1.2011.6.7.1.17 | Integer32 | RO | |
scalar · Integer32 · read-only · current Maximum switch members that the cluster can support (including the command switch). | ||||
| ShgmpClusterCmdSwMac | 1.3.6.1.4.1.2011.6.7.1.18 | MacAddress | RO | |
scalar · MacAddress · read-only · current The mac address of command switch. It will be 00:00:00:00:00:00 when not a member of a cluster. | ||||
| ShgmpRun | 1.3.6.1.4.1.2011.6.7.1.19 | INTEGER | RW | |
scalar · INTEGER · read-write · current Status of the cluster function.
| ||||
| ShgmpClusterAutojoin | 1.3.6.1.4.1.2011.6.7.1.20 | INTEGER | RW | |
scalar · INTEGER · read-write · current Status of the cluster autojoin function. The default value is false(0).
| ||||
| ShgmpClusterDiscAgingTime | 1.3.6.1.4.1.2011.6.7.1.21 | Integer32 (0..18) | RW | |
scalar · Integer32 (0..18) · read-write · current Aging time of the lanswitch in disconnect state. The default value is 0. | ||||
| ShgmpPlugAndPlayStatus | 1.3.6.1.4.1.2011.6.7.1.22 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current Status of the plug and play function. The default value is disabled(2) . | ||||
| ShgmpMultiMacAddress | 1.3.6.1.4.1.2011.6.7.1.23 | MacAddress | RW | |
scalar · MacAddress · read-write · current Multicast MAC address of cluster. The default value is '01:80:C2:00:00:0A'. | ||||
| ShgmpManageVlan | 1.3.6.1.4.1.2011.6.7.1.24 | Integer32 (1..4094) | RW | |
scalar · Integer32 (1..4094) · read-write · current ID of the management VLAN of the cluster. The default value is 1. | ||||
| ShgmpSftpServer | 1.3.6.1.4.1.2011.6.7.1.25 | IpAddress | RW | |
scalar · IpAddress · read-write · current The cluster members can access the SFTP Server through the command switch, which can only be configured and accessed on the command switch. The default value is '0.0.0.0'. | ||||
| ThgmpUnrelatedPortNdpAdminTable | 1.3.6.1.4.1.2011.6.7.1.26 | NA | ||
table · not-accessible · current The table of the commands to set the NDP status on unrelated interfaces of cluster members. | ||||
| RhgmpUnrelatedPortNdpAdminEntry | 1.3.6.1.4.1.2011.6.7.1.26.1 | NA | ||
row · not-accessible · current The entry used to set the NDP status on unrelated interfaces of cluster members. | ||||
| ChgmpUnrelatedPortNdpAdminCmdId | 1.3.6.1.4.1.2011.6.7.1.26.1.1 | Integer32 (1..10) | NA | |
column · Integer32 (1..10) · not-accessible · current The identifier of the command to set the NDP status on unrelated interfaces of cluster members. | ||||
| ChgmpUnrelatedPortNdpAdminGroupType | 1.3.6.1.4.1.2011.6.7.1.26.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current Type of grouping member swithces.
| ||||
| ChgmpUnrelatedPortNdpAdminGroupValue | 1.3.6.1.4.1.2011.6.7.1.26.1.3 | OCTET STRING (SIZE (0..1024)) | RC | |
column · OCTET STRING (SIZE (0..1024)) · read-create · current Details about grouping member switches. | ||||
| ChgmpUnrelatedPortNdpAdminStatus | 1.3.6.1.4.1.2011.6.7.1.26.1.4 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current The flag bit identifying whether NDP is enabled or not on unrelated interface on unrelated interfaces of cluster members. | ||||
| ChgmpUnrelatedPortNdpAdminRowStatus | 1.3.6.1.4.1.2011.6.7.1.26.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current Row status for this table. | ||||
| ThgmpUnrelatedPortNdpResultTable | 1.3.6.1.4.1.2011.6.7.1.27 | NA | ||
table · not-accessible · current The result table of enabling or disabling NDP on unrelated interfaces of cluster members. | ||||
| RhgmpUnrelatedPortNdpResultEntry | 1.3.6.1.4.1.2011.6.7.1.27.1 | NA | ||
row · not-accessible · current The entry of the result when enabling or disabling NDP on unrelated interfaces of cluster members. | ||||
| ChgmpUnrelatedPortNdpResultMemberMac | 1.3.6.1.4.1.2011.6.7.1.27.1.1 | MacAddress | NA | |
column · MacAddress · not-accessible · current MAC address of the member switch. | ||||
| ChgmpUnrelatedPortNdpResultMemberId | 1.3.6.1.4.1.2011.6.7.1.27.1.2 | Integer32 (0..2047) | RO | |
column · Integer32 (0..2047) · read-only · current Identifier of the member switch. | ||||
| ChgmpUnrelatedPortNdpResult | 1.3.6.1.4.1.2011.6.7.1.27.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Results returned from member switches.
| ||||
| ThgmpUnrelatedPortNtdpAdminTable | 1.3.6.1.4.1.2011.6.7.1.28 | NA | ||
table · not-accessible · current The table of the commands to set the NTDP status on unrelated interfaces of cluster members. | ||||
| RhgmpUnrelatedPortNtdpAdminEntry | 1.3.6.1.4.1.2011.6.7.1.28.1 | NA | ||
row · not-accessible · current The entry used to set the NTDP status on unrelated interfaces of cluster members. | ||||
| ChgmpUnrelatedPortNtdpAdminCmdId | 1.3.6.1.4.1.2011.6.7.1.28.1.1 | Integer32 (1..10) | NA | |
column · Integer32 (1..10) · not-accessible · current The identifier of the command to set the NTDP status on unrelated interfaces of cluster members. | ||||
| ChgmpUnrelatedPortNtdpAdminGroupType | 1.3.6.1.4.1.2011.6.7.1.28.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current Type of grouping member swithces.
| ||||
| ChgmpUnrelatedPortNtdpAdminGroupValue | 1.3.6.1.4.1.2011.6.7.1.28.1.3 | OCTET STRING (SIZE (0..1024)) | RC | |
column · OCTET STRING (SIZE (0..1024)) · read-create · current Details about grouping member switches. | ||||
| ChgmpUnrelatedPortNtdpAdminStatus | 1.3.6.1.4.1.2011.6.7.1.28.1.4 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current The flag bit identifying whether NTDP is enabled or not on unrelated interface on unrelated interfaces of cluster members. | ||||
| ChgmpUnrelatedPortNtdpAdminRowStatus | 1.3.6.1.4.1.2011.6.7.1.28.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current Row status for this table. | ||||
| ThgmpUnrelatedPortNtdpResultTable | 1.3.6.1.4.1.2011.6.7.1.29 | NA | ||
table · not-accessible · current The result table of enabling or disabling NTDP on unrelated interfaces of cluster members. | ||||
| RhgmpUnrelatedPortNtdpResultEntry | 1.3.6.1.4.1.2011.6.7.1.29.1 | NA | ||
row · not-accessible · current The entry of the result when enabling or disabling NTDP on unrelated interfaces of cluster members. | ||||
| ChgmpUnrelatedPortNtdpResultMemberMac | 1.3.6.1.4.1.2011.6.7.1.29.1.1 | MacAddress | NA | |
column · MacAddress · not-accessible · current MAC address of the member switch. | ||||
| ChgmpUnrelatedPortNtdpResultMemberId | 1.3.6.1.4.1.2011.6.7.1.29.1.2 | Integer32 (0..2047) | RO | |
column · Integer32 (0..2047) · read-only · current Identifier of the member switch. | ||||
| ChgmpUnrelatedPortNtdpResult | 1.3.6.1.4.1.2011.6.7.1.29.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Results returned from member switches.
| ||||
| ThgmpBatchUpgradeTable | 1.3.6.1.4.1.2011.6.7.1.30 | NA | ||
table · not-accessible · current Table of batch upgrade commands. | ||||
| RhgmpBatchUpgradeEntry | 1.3.6.1.4.1.2011.6.7.1.30.1 | NA | ||
row · not-accessible · current Provides the information of batch upgrade entry. | ||||
| ChgmpBatchUpgradeCmdId | 1.3.6.1.4.1.2011.6.7.1.30.1.1 | Integer32 (1..10) | NA | |
column · Integer32 (1..10) · not-accessible · current Identifier of batch upgrade commands. | ||||
| ChgmpBatchUpgradeGroupType | 1.3.6.1.4.1.2011.6.7.1.30.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current Type of grouping member switches.
| ||||
| ChgmpBatchUpgradeGroupValue | 1.3.6.1.4.1.2011.6.7.1.30.1.3 | OCTET STRING (SIZE (0..1024)) | RC | |
column · OCTET STRING (SIZE (0..1024)) · read-create · current Details about grouping member switches. | ||||
| ChgmpBatchUpgradeFileType | 1.3.6.1.4.1.2011.6.7.1.30.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current Type of the file to be upgraded.
| ||||
| ChgmpBatchUpgradeFileName | 1.3.6.1.4.1.2011.6.7.1.30.1.5 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current Path of the file to be upgraded. | ||||
| ChgmpBatchUpgradeRowStatus | 1.3.6.1.4.1.2011.6.7.1.30.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current Row status for this table. | ||||
| ThgmpBatchUpgradeResultTable | 1.3.6.1.4.1.2011.6.7.1.31 | NA | ||
table · not-accessible · current Results of batch commands returned from member switches. | ||||
| RhgmpBatchUpgradeResultEntry | 1.3.6.1.4.1.2011.6.7.1.31.1 | NA | ||
row · not-accessible · current Provides the result of batch upgrade entry. | ||||
| ChgmpBatchUpgradeResultMemberMac | 1.3.6.1.4.1.2011.6.7.1.31.1.1 | MacAddress | NA | |
column · MacAddress · not-accessible · current MAC address of the member switch. | ||||
| ChgmpBatchUpgradeResultMemberId | 1.3.6.1.4.1.2011.6.7.1.31.1.2 | Integer32 (0..2047) | RO | |
column · Integer32 (0..2047) · read-only · current Identifier of the member switch. | ||||
| ChgmpBatchUpgradeResult | 1.3.6.1.4.1.2011.6.7.1.31.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Results returned from member switchs.
| ||||
| ThgmpBatchRebootTable | 1.3.6.1.4.1.2011.6.7.1.32 | NA | ||
table · not-accessible · current Table of commands for member switch reboot. | ||||
| RhgmpBatchRebootEntry | 1.3.6.1.4.1.2011.6.7.1.32.1 | NA | ||
row · not-accessible · current Provides the information of member reboot entry.
| ||||
| ChgmpBatchRebootCmdId | 1.3.6.1.4.1.2011.6.7.1.32.1.1 | Integer32 (1..10) | NA | |
column · Integer32 (1..10) · not-accessible · current Identifier of the commands for member switch reboot. | ||||
| ChgmpBatchRebootGroupType | 1.3.6.1.4.1.2011.6.7.1.32.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current Type of grouping member swithces.
| ||||
| ChgmpBatchRebootGroupValue | 1.3.6.1.4.1.2011.6.7.1.32.1.3 | OCTET STRING (SIZE (0..1024)) | RC | |
column · OCTET STRING (SIZE (0..1024)) · read-create · current Details about grouping member switches. | ||||
| ChgmpBatchRebootRowStatus | 1.3.6.1.4.1.2011.6.7.1.32.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current Row status for this table. | ||||
| ThgmpBatchRebootResultTable | 1.3.6.1.4.1.2011.6.7.1.33 | NA | ||
table · not-accessible · current Results of reboot command returned from member switches. | ||||
| RhgmpBatchRebootResultEntry | 1.3.6.1.4.1.2011.6.7.1.33.1 | NA | ||
row · not-accessible · current Provides the result of member reboot entry. | ||||
| ChgmpBatchRebootResultMemberMac | 1.3.6.1.4.1.2011.6.7.1.33.1.1 | MacAddress | NA | |
column · MacAddress · not-accessible · current MAC address of the member switch. | ||||
| ChgmpBatchRebootResultMemberId | 1.3.6.1.4.1.2011.6.7.1.33.1.2 | Integer32 (0..2047) | RO | |
column · Integer32 (0..2047) · read-only · current Identifier of the member switch. | ||||
| ChgmpBatchRebootResult | 1.3.6.1.4.1.2011.6.7.1.33.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Results returned from member switches.
| ||||
| ThgmpBatchSaveTable | 1.3.6.1.4.1.2011.6.7.1.34 | NA | ||
table · not-accessible · current The table of saving configuration files on cluster members. | ||||
| RhgmpBatchSaveEntry | 1.3.6.1.4.1.2011.6.7.1.34.1 | NA | ||
row · not-accessible · current The entry of saving configuration files on cluster members.
| ||||
| ChgmpBatchSaveCmdId | 1.3.6.1.4.1.2011.6.7.1.34.1.1 | Integer32 (1..10) | NA | |
column · Integer32 (1..10) · not-accessible · current The identifier of the commands to save configuration files on cluster members. | ||||
| ChgmpBatchSaveGroupType | 1.3.6.1.4.1.2011.6.7.1.34.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current Type of grouping member swithces.
| ||||
| ChgmpBatchSaveGroupValue | 1.3.6.1.4.1.2011.6.7.1.34.1.3 | OCTET STRING (SIZE (0..1024)) | RC | |
column · OCTET STRING (SIZE (0..1024)) · read-create · current Details about grouping member switches. | ||||
| ChgmpBatchSaveRowStatus | 1.3.6.1.4.1.2011.6.7.1.34.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current Row status for this table. | ||||
| ThgmpBatchSaveResultTable | 1.3.6.1.4.1.2011.6.7.1.35 | NA | ||
table · not-accessible · current The results of saving configuration files on cluster members. | ||||
| RhgmpBatchSaveResultEntry | 1.3.6.1.4.1.2011.6.7.1.35.1 | NA | ||
row · not-accessible · current The entry of result when saving configuration files on cluster members. | ||||
| ChgmpBatchSaveResultMemberMac | 1.3.6.1.4.1.2011.6.7.1.35.1.1 | MacAddress | NA | |
column · MacAddress · not-accessible · current MAC address of the member switch. | ||||
| ChgmpBatchSaveResultMemberId | 1.3.6.1.4.1.2011.6.7.1.35.1.2 | Integer32 (0..2047) | RO | |
column · Integer32 (0..2047) · read-only · current Identifier of the member switch. | ||||
| ChgmpBatchSaveResult | 1.3.6.1.4.1.2011.6.7.1.35.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Results returned from member switches.
| ||||
| ThgmpBatchSynchronizeCfgFileTable | 1.3.6.1.4.1.2011.6.7.1.36 | NA | ||
table · not-accessible · current The table of synchronizing configuration files on cluster members. | ||||
| RhgmpBatchSynchronizeCfgFileEntry | 1.3.6.1.4.1.2011.6.7.1.36.1 | NA | ||
row · not-accessible · current The entry of synchronizing configuration files on cluster members. | ||||
| ChgmpBatchSynchronizeCfgFileCmdId | 1.3.6.1.4.1.2011.6.7.1.36.1.1 | Integer32 (1..10) | NA | |
column · Integer32 (1..10) · not-accessible · current The identifier of the command of synchronizing configuration files on cluster members. | ||||
| ChgmpBatchSynchronizeCfgFileGroupType | 1.3.6.1.4.1.2011.6.7.1.36.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current Type of grouping member swithces.
| ||||
| ChgmpBatchSynchronizeCfgFileGroupValue | 1.3.6.1.4.1.2011.6.7.1.36.1.3 | OCTET STRING (SIZE (0..1024)) | RC | |
column · OCTET STRING (SIZE (0..1024)) · read-create · current Details about grouping member switches. | ||||
| ChgmpBatchSynchronizeCfgFileRowStatus | 1.3.6.1.4.1.2011.6.7.1.36.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current Row status for this table. | ||||
| ThgmpBatchSynchronizeCfgFileResultTable | 1.3.6.1.4.1.2011.6.7.1.37 | NA | ||
table · not-accessible · current The result of synchronizing configuration files on cluster members. | ||||
| RhgmpBatchSynchronizeCfgFileResultEntry | 1.3.6.1.4.1.2011.6.7.1.37.1 | NA | ||
row · not-accessible · current The entry of result when synchronizing configuration files on cluster members. | ||||
| ChgmpBatchSynchronizeCfgFileResultMemberMac | 1.3.6.1.4.1.2011.6.7.1.37.1.1 | MacAddress | NA | |
column · MacAddress · not-accessible · current MAC address of the member switch. | ||||
| ChgmpBatchSynchronizeCfgFileResultMemberId | 1.3.6.1.4.1.2011.6.7.1.37.1.2 | Integer32 (0..2047) | RO | |
column · Integer32 (0..2047) · read-only · current Identifier of the member switch. | ||||
| ChgmpBatchSynchronizeCfgFileResult | 1.3.6.1.4.1.2011.6.7.1.37.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Results returned from member switches.
| ||||
| ShgmpMemberRebootTimeoutValue | 1.3.6.1.4.1.2011.6.7.1.38 | Integer32 (60..3600) | RW | |
scalar · Integer32 (60..3600) · read-write · current Timeout time of the member reboot operation (in seconds). The default value is 360 seconds. | ||||
| ShgmpClusterVersion | 1.3.6.1.4.1.2011.6.7.1.39 | INTEGER | RW | |
scalar · INTEGER · read-write · current Configure the cluster version. The default value is v2c(2).
| ||||
| NhwStackObject | 1.3.6.1.4.1.2011.6.7.2 | |||
| NhgmpStackEventsV2 | 1.3.6.1.4.1.2011.6.7.2.0 | |||
| !hgmpStackMemberfailure | 1.3.6.1.4.1.2011.6.7.2.0.1 | |||
notification · current When a stack member failed, send an SNMP trap to the network manager.
| ||||
| !hgmpStackMemberRecover | 1.3.6.1.4.1.2011.6.7.2.0.2 | |||
notification · current When a stack member recovered, send an SNMP trap to the network manager.
| ||||
| !hgmpStackMemberStatusChange | 1.3.6.1.4.1.2011.6.7.2.0.3 | |||
notification · current When a stack member status changed, send an SNMP trap to the network manager. | ||||
| ShgmpStackMemberTableChange | 1.3.6.1.4.1.2011.6.7.2.1 | Integer32 (0..65535) | RO | |
scalar · Integer32 (0..65535) · read-only · current Change identifier of the stack member table. The default value is 0. | ||||
| ShgmpStackMemberDisconRate | 1.3.6.1.4.1.2011.6.7.2.2 | Integer32 | RO | |
scalar · Integer32 · read-only · current Disconnection rate of the stack member switches. The default value is 0. | ||||
| ShgmpMainLanswitchFlag | 1.3.6.1.4.1.2011.6.7.2.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Main switch flag. The default value is false(0).
| ||||
| ShgmpStackIpPoolStartIP | 1.3.6.1.4.1.2011.6.7.2.4 | IpAddress | RW | |
scalar · IpAddress · read-write · current The first address of management IP network segment assigned by the master switch, which cannot be modified in the case that there is IP address assignment. The default value is '0.0.0.0'. | ||||
| ShgmpStackIpPoolLength | 1.3.6.1.4.1.2011.6.7.2.5 | Integer32 (1..200) | RW | |
scalar · Integer32 (1..200) · read-write · current The length of the management IP segment assigned by the master switch, which cannot be modified if there is IP address assignment. The default value is 17. | ||||
| ThgmpStackMemberTable | 1.3.6.1.4.1.2011.6.7.2.6 | NA | ||
table · not-accessible · current Stack member table. | ||||
| RhgmpStackMemberEntry | 1.3.6.1.4.1.2011.6.7.2.6.1 | NA | ||
row · not-accessible · current Provides information about the stack member entry. | ||||
| ChgmpStackMemberDeviceId | 1.3.6.1.4.1.2011.6.7.2.6.1.1 | OCTET STRING (SIZE (0..10)) | RO | |
column · OCTET STRING (SIZE (0..10)) · read-only · current 2 bytes address type of the switch + 2 bytes/0 + MAC address, comprising a hexadecimal number string. | ||||
| ChgmpStackMemberSerial | 1.3.6.1.4.1.2011.6.7.2.6.1.2 | Integer32 (0..2047) | RO | |
column · Integer32 (0..2047) · read-only · current When adding a member switch to the stack, the master switch will assign a unique integer to identify it. | ||||
| ChgmpStackMemberIpAddr | 1.3.6.1.4.1.2011.6.7.2.6.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The private member IP address for the communication inside the stack. | ||||
| ChgmpStackMemberName | 1.3.6.1.4.1.2011.6.7.2.6.1.4 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Hostname of the member switch. | ||||
| ChgmpStackMemberPassword | 1.3.6.1.4.1.2011.6.7.2.6.1.5 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Member password for joining a stack. | ||||
| ChgmpStackMemberPlatform | 1.3.6.1.4.1.2011.6.7.2.6.1.6 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Set the hardware platform. A null string indicates the information does not exist in the device adjacency table. | ||||
| ChgmpStackMemberStatus | 1.3.6.1.4.1.2011.6.7.2.6.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Member status on the master switch, used for displaying the network management status. The default value is fault.
| ||||
| ChgmpStackMemberDisconCount | 1.3.6.1.4.1.2011.6.7.2.6.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current Count of inside communication disconnections between the member switch and the main switch. | ||||
| ChgmpStackMemberEnrollTime | 1.3.6.1.4.1.2011.6.7.2.6.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current Enrollment time of the member, measured in seconds. | ||||
| ShgmpStackRole | 1.3.6.1.4.1.2011.6.7.2.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current Role of this switch in a stack. The default value is roleCASW(16).
| ||||
| ShgmpStackMaxPoolNum | 1.3.6.1.4.1.2011.6.7.2.8 | Integer32 | RO | |
scalar · Integer32 · read-only · current Maximum switch members in a stack that the switch supports (including the main switch). | ||||
| ShgmpStackMainSwMac | 1.3.6.1.4.1.2011.6.7.2.9 | MacAddress | RO | |
scalar · MacAddress · read-only · current The MAC address of the main switch. It will be 00:00:00:00:00:00 when not a member of a stack. | ||||
| ShgmpStackIpPoolMask | 1.3.6.1.4.1.2011.6.7.2.10 | IpAddress | RW | |
scalar · IpAddress · read-write · current The mask of the management IP segment assigned by the master switch, which cannot be modified if there is IP address assignment. The default value is '255.255.0.0 '. | ||||
| NhwNTDPObject | 1.3.6.1.4.1.2011.6.7.4 | |||
| ShgmpNTDPCollectTopTime | 1.3.6.1.4.1.2011.6.7.4.1 | Integer32 (0..65535) | RW | |
scalar · Integer32 (0..65535) · read-write · current Topology collection interval of the command switch of the cluster, measured in minutes. The default value is 0. | ||||
| ShgmpNTDPHopRange | 1.3.6.1.4.1.2011.6.7.4.2 | Integer32 (1..16) | RW | |
scalar · Integer32 (1..16) · read-write · current Range of the topology collection of the command switch. The maximum value of this object may vary with different types of products. | ||||
| ShgmpNTDPRun | 1.3.6.1.4.1.2011.6.7.4.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Status of the NTDP function.
| ||||
| ShgmpNTDPPortDelay | 1.3.6.1.4.1.2011.6.7.4.4 | Integer32 (1..1000) | RW | |
scalar · Integer32 (1..1000) · read-write · current Set the delay to forward the topology request via the ports, measured in milliseconds. The default value is 20. | ||||
| ShgmpNTDPHopDelay | 1.3.6.1.4.1.2011.6.7.4.5 | Integer32 (1..1000) | RW | |
scalar · Integer32 (1..1000) · read-write · current Set the delay to forward the topology request from each hop, measured in milliseconds. The default value is 200. | ||||
| ShgmpNTDPLastTopCollectDuration | 1.3.6.1.4.1.2011.6.7.4.6 | Integer32 | RO | |
scalar · Integer32 · read-only · current Duration of the latest overall topology collection, a performance count measured in milliseconds. The default value is 0. | ||||
| ShgmpNTDPCacheChange | 1.3.6.1.4.1.2011.6.7.4.7 | Integer32 (0..65535) | RO | |
scalar · Integer32 (0..65535) · read-only · current Add 1 when the device table changes. The network administrator will check if it has changed before accessing the table. If it has not changed, he will not access again. The default value is 0. | ||||
| ShgmpNTDPTOPTableChange | 1.3.6.1.4.1.2011.6.7.4.8 | Integer32 (0..65535) | RO | |
scalar · Integer32 (0..65535) · read-only · current Add 1 when the topology table changes. The network administrator will check if it has changed before accessing the table. If it has not changed, he will not access again. The default value is 0. | ||||
| ThgmpNTDPInterfaceTable | 1.3.6.1.4.1.2011.6.7.4.9 | NA | ||
table · not-accessible · current Status of NTDP function on the switch's port. | ||||
| RhgmpNTDPInterfaceEntry | 1.3.6.1.4.1.2011.6.7.4.9.1 | NA | ||
row · not-accessible · current Provides information about the NTDP function on the switch's port. | ||||
| ChgmpNTDPInterfaceIfIndex | 1.3.6.1.4.1.2011.6.7.4.9.1.1 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Unique identifier of an interface of the device. | ||||
| ChgmpNTDPInterfaceEnable | 1.3.6.1.4.1.2011.6.7.4.9.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current If it is true, the device will send and receive the NTDP packets via the interface. To disable the NTDP function on the interface, set the entry to false(0).
| ||||
| ThgmpNTDPCacheTable | 1.3.6.1.4.1.2011.6.7.4.10 | NA | ||
table · not-accessible · current Access information about the switch from the topology table. | ||||
| RhgmpNTDPCacheEntry | 1.3.6.1.4.1.2011.6.7.4.10.1 | NA | ||
row · not-accessible · current Provides information about the switch from the topology table. | ||||
| ChgmpNTDPCacheHashIndex | 1.3.6.1.4.1.2011.6.7.4.10.1.1 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current NTDP information is saved in a HASH table on the command switch. Using DeviceID as an index will lead to the comparison of a large number of character strings, which puts too many burdens on the command switch. A HASHIndex is added to reduce the character string comparison to the least range. | ||||
| ChgmpNTDPCacheDeviceID | 1.3.6.1.4.1.2011.6.7.4.10.1.2 | OCTET STRING (SIZE (0..10)) | RO | |
column · OCTET STRING (SIZE (0..10)) · read-only · current 2 bytes address type of the member switch + 2 bytes /0 + MAC address, comprising as a character string of the hexadecimal number. | ||||
| ChgmpNTDPCacheClusterName | 1.3.6.1.4.1.2011.6.7.4.10.1.3 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Name of the cluster including the device. | ||||
| ChgmpNTDPCacheClusterRole | 1.3.6.1.4.1.2011.6.7.4.10.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Cluster role of the current device, which can be a command switch(0X01), member switch(0X02), backup switch(0X03), candidate switch(0X10) or an independent switch(incapable of cluster member)(0X11). The default value is 17.
| ||||
| ChgmpNTDPCacheCapabilities | 1.3.6.1.4.1.2011.6.7.4.10.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The capabilities of the device. Zero indicates that the field was not included in the latest NTDP packet. The default value is 0. | ||||
| ChgmpNTDPCacheVersion | 1.3.6.1.4.1.2011.6.7.4.10.1.6 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The version information about the corresponding device. A null string indicates that the field was not included in the latest NTDP packet. | ||||
| ChgmpNTDPCachePlatform | 1.3.6.1.4.1.2011.6.7.4.10.1.7 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Hardware platform. A null string indicates that the field was not included in the latest NTDP packet. | ||||
| ChgmpNTDPCacheMngVLAN | 1.3.6.1.4.1.2011.6.7.4.10.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current The management VLAN ID of a device. The default value is 1. | ||||
| ChgmpNTDPCacheHop | 1.3.6.1.4.1.2011.6.7.4.10.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current Hops to this switch. | ||||
| ThgmpNTDPTopTable | 1.3.6.1.4.1.2011.6.7.4.11 | NA | ||
table · not-accessible · current Access the topology structure collected by the NTDP. | ||||
| RhgmpNTDPTopEntry | 1.3.6.1.4.1.2011.6.7.4.11.1 | NA | ||
row · not-accessible · current Provides information about the topology structure collected by the NTDP. | ||||
| ChgmpNTDPTopHashIndex | 1.3.6.1.4.1.2011.6.7.4.11.1.1 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current NTDP information is saved in a HASH table on the command switch. Using DeviceID as an index will lead to the comparison of a large number of character strings, which puts too many burdens on the command switch. A HASHIndex is added to reduce the character string comparison to the least range. | ||||
| ChgmpNTDPTopEdgeStartDevID | 1.3.6.1.4.1.2011.6.7.4.11.1.2 | OCTET STRING (SIZE (0..10)) | RO | |
column · OCTET STRING (SIZE (0..10)) · read-only · current 2 bytes address type of the member switch + 2 bytes /0 + MAC address, comprising a character string of the hexadecimal number. | ||||
| ChgmpNTDPTopEdgeIndex | 1.3.6.1.4.1.2011.6.7.4.11.1.3 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Edge index of this entry in the data structure. | ||||
| ChgmpNTDPTopEdgeEndDevID | 1.3.6.1.4.1.2011.6.7.4.11.1.4 | OCTET STRING (SIZE (0..10)) | RO | |
column · OCTET STRING (SIZE (0..10)) · read-only · current 2 bytes address type of the member switch + 2 bytes /0 + MAC address, comprising a character string of the hexadecimal number. | ||||
| ChgmpNTDPTopEdgeStartPort | 1.3.6.1.4.1.2011.6.7.4.11.1.5 | OCTET STRING (SIZE (0..64)) | RO | |
column · OCTET STRING (SIZE (0..64)) · read-only · current The number of the first port of a topology edge. Interface type + card number / slot number / sequence number. | ||||
| ChgmpNTDPTopEdgeStartPortFullDuplex | 1.3.6.1.4.1.2011.6.7.4.11.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The full-duplex status of the first port on a topology edge. The default value is half.
| ||||
| ChgmpNTDPTopEdgeStartPortSpeed | 1.3.6.1.4.1.2011.6.7.4.11.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The speed of the first port on a topology edge. The default value is 0. | ||||
| ChgmpNTDPTopEdgeEndPort | 1.3.6.1.4.1.2011.6.7.4.11.1.8 | OCTET STRING (SIZE (0..64)) | RO | |
column · OCTET STRING (SIZE (0..64)) · read-only · current The number of the last port of a topology edge. Interface type + card number / slot number / sequence number. | ||||
| ChgmpNTDPTopEdgeStartPortIfIndex | 1.3.6.1.4.1.2011.6.7.4.11.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current The interface index of the start port. | ||||
| ChgmpNTDPTopEdgeEndPortIfIndex | 1.3.6.1.4.1.2011.6.7.4.11.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current The iterface index of the end port. | ||||
| ShgmpNTDPExplore | 1.3.6.1.4.1.2011.6.7.4.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current The value of this object identifies whether to start collecting topology information. 1 indicates to start collecting topology information. 0 is the default value, indicating doing nothing. The get operation always returns 0.
| ||||
| ThgmpNTDPTopoLinkTable | 1.3.6.1.4.1.2011.6.7.4.13 | NA | ||
table · not-accessible · current This object indicates the topology link table collected using NTDP. | ||||
| RhgmpNTDPTopoLinkEntry | 1.3.6.1.4.1.2011.6.7.4.13.1 | NA | ||
row · not-accessible · current This object indicates the topology link information collected using NTDP. | ||||
| ChgmpNTDPTopoLocalDeviceID | 1.3.6.1.4.1.2011.6.7.4.13.1.1 | OCTET STRING (SIZE (0..10)) | NA | |
column · OCTET STRING (SIZE (0..10)) · not-accessible · current This object indicates the ID of the local device. This ID is a hexadecimal string that comprises 2 bytes address type of the member switch, 2 bytes /0, and MAC address. | ||||
| ChgmpNTDPTopoLocalPortName | 1.3.6.1.4.1.2011.6.7.4.13.1.2 | OCTET STRING (SIZE (0..64)) | NA | |
column · OCTET STRING (SIZE (0..64)) · not-accessible · current This object indicates the name of the local port. | ||||
| ChgmpNTDPTopoNbrDeviceID | 1.3.6.1.4.1.2011.6.7.4.13.1.3 | OCTET STRING (SIZE (0..10)) | NA | |
column · OCTET STRING (SIZE (0..10)) · not-accessible · current This object indicates the ID of the neighbor device. This ID is a hexadecimal string that comprises 2 bytes address type of the member switch, 2 bytes /0, and MAC address. | ||||
| ChgmpNTDPTopoNbrPortName | 1.3.6.1.4.1.2011.6.7.4.13.1.4 | OCTET STRING (SIZE (0..64)) | NA | |
column · OCTET STRING (SIZE (0..64)) · not-accessible · current This object indicates the name of the neighbor port. | ||||
| ChgmpNTDPTopoLinkStatus | 1.3.6.1.4.1.2011.6.7.4.13.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the topology link status.
| ||||
| NhgmpNTDPNotifications | 1.3.6.1.4.1.2011.6.7.4.14 | |||
| !hgmpNTDPTopoChange | 1.3.6.1.4.1.2011.6.7.4.14.1 | |||
notification · current This object indicates that an SNMP trap is sent to the NMS when the NTDP topology is changed. | ||||
| NhwNDPObject | 1.3.6.1.4.1.2011.6.7.5 | |||
| ShwNDPStatus | 1.3.6.1.4.1.2011.6.7.5.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current NDP protocol module enable flag.
| ||||
| ShwNDPHelloTimer | 1.3.6.1.4.1.2011.6.7.5.2 | Integer32 (5..254) | RW | |
scalar · Integer32 (5..254) · read-write · current NDP packet transmission interval, measured in seconds. The default value is 60. | ||||
| ShwNDPAgingTime | 1.3.6.1.4.1.2011.6.7.5.3 | Integer32 (6..255) | RW | |
scalar · Integer32 (6..255) · read-write · current How long NDP information about the local switch can be hold in the adjacent switch, measured in seconds. The default value is 180. | ||||
| ShwNDPChange | 1.3.6.1.4.1.2011.6.7.5.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current Change identifier of the Neighbor table. | ||||
| ThwNDPPortTable | 1.3.6.1.4.1.2011.6.7.5.5 | NA | ||
table · not-accessible · current Status of NDP function on the switch's port. | ||||
| RhwNDPPortEntry | 1.3.6.1.4.1.2011.6.7.5.5.1 | NA | ||
row · not-accessible · current Provides information about the NDP function on the switch's port.
| ||||
| ChwNDPIfIndex | 1.3.6.1.4.1.2011.6.7.5.5.1.1 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Unique identifier of an interface of the device. | ||||
| ChwNDPPortStatus | 1.3.6.1.4.1.2011.6.7.5.5.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current If it is enabled, the device will send and receive NDP packets via the interface. To disable the NDP function on the interface, set the entry to false(0).
| ||||
| ThwNDPPortNbTable | 1.3.6.1.4.1.2011.6.7.5.6 | NA | ||
table · not-accessible · current Table of NDP neighbor information. | ||||
| RhwNDPPortNbEntry | 1.3.6.1.4.1.2011.6.7.5.6.1 | NA | ||
row · not-accessible · current Provides neighbor information about NDP. | ||||
| ChwNDPPortNbDeviceId | 1.3.6.1.4.1.2011.6.7.5.6.1.1 | OCTET STRING (SIZE (0..10)) | RO | |
column · OCTET STRING (SIZE (0..10)) · read-only · current 2 bytes address type of the member switch + 2 bytes /0 + MAC address, comprising a character string of the hexadecimal number. | ||||
| ChwNDPPortNbPortName | 1.3.6.1.4.1.2011.6.7.5.6.1.2 | OCTET STRING (SIZE (0..64)) | RO | |
column · OCTET STRING (SIZE (0..64)) · read-only · current Unique identifier of a port. A null string indicates that the field was not included in the latest NDP packet. Interface type + card number / slot number / sequence number. | ||||
| ChwNDPPortNbDeviceName | 1.3.6.1.4.1.2011.6.7.5.6.1.3 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Device name. A null string indicates that the field was not included in the latest NDP packet. | ||||
| ChwNDPPortNbPortMode | 1.3.6.1.4.1.2011.6.7.5.6.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The neighbor port duplex mode.
| ||||
| ChwNDPPortNbProductVer | 1.3.6.1.4.1.2011.6.7.5.6.1.5 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Product version. A null string indicates that the field was not included in the latest NDP packet. | ||||
| ChwNDPPortNbHardVer | 1.3.6.1.4.1.2011.6.7.5.6.1.6 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Hardware version. A null string indicates that the field was not included in the latest NDP packet. | ||||
| ChwNDPPortNbBootromVer | 1.3.6.1.4.1.2011.6.7.5.6.1.7 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Bootrom version. A null string indicates that the field was not included in the latest NDP packet. | ||||
| ChwNDPPortNbSoftVer | 1.3.6.1.4.1.2011.6.7.5.6.1.8 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Software version. A null string indicates that the field was not included in the latest NDP packet. | ||||
| ChwNDPPortNbAgingtime | 1.3.6.1.4.1.2011.6.7.5.6.1.9 | Integer32 (5..255) | RO | |
column · Integer32 (5..255) · read-only · current How long NDP information about the local switch can be hold in the adjacent switch, measured in seconds. | ||||
| ShwNDPTrunkMemberEnable | 1.3.6.1.4.1.2011.6.7.5.7 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current The value of this object identifies whether to enable neighbor discovery on trunk member interfaces. | ||||
| NhwClusterConformance | 1.3.6.1.4.1.2011.6.7.6 | |||
| NhwClusterGroups | 1.3.6.1.4.1.2011.6.7.6.1 | |||
| GcurrentObjectGroup | 1.3.6.1.4.1.2011.6.7.6.1.1 | |||
group · current Enter the description of the created OBJECT-GROUP.
| ||||
| GcurrentNotificationGroup | 1.3.6.1.4.1.2011.6.7.6.1.2 | |||
group · current Enter the description of the created NOTIFICATION-GROUP. | ||||
| NhwClusterCompliances | 1.3.6.1.4.1.2011.6.7.6.2 | |||
| MbasicCompliance | 1.3.6.1.4.1.2011.6.7.6.2.1 | |||
compliance · current Enter the description of the created MODULE-COMPLIANCE. | ||||
Traps / Notifications
- hgmpMemberAdd
1.3.6.1.4.1.2011.6.7.1.0.6 - hgmpMemberRecover
1.3.6.1.4.1.2011.6.7.1.0.2 - hgmpMemberStatusChange
1.3.6.1.4.1.2011.6.7.1.0.3 - hgmpMemberfailure
1.3.6.1.4.1.2011.6.7.1.0.1 - hgmpNTDPTopoChange
1.3.6.1.4.1.2011.6.7.4.14.1 - hgmpNetTopChange
1.3.6.1.4.1.2011.6.7.1.0.4 - hgmpStackMemberRecover
1.3.6.1.4.1.2011.6.7.2.0.2 - hgmpStackMemberStatusChange
1.3.6.1.4.1.2011.6.7.2.0.3 - hgmpStackMemberfailure
1.3.6.1.4.1.2011.6.7.2.0.1