HUAWEI-ETHOAM-MIB
HUAWEI Technology Co.,LtdV2.44, Delete employee ID for this mib.
snmptranslate -m HUAWEI-ETHOAM-MIB -Tpsnmpwalk -v2c -c <community> -m HUAWEI-ETHOAM-MIB <host> 1.3.6.1.4.1.2011.5.25.136.1Imports
| HCNUM-TC | CounterBasedGauge64 |
|---|---|
| HUAWEI-MIB | hwDatacomm |
| IF-MIB | InterfaceIndex, InterfaceIndexOrZero, ifDescr, ifIndex |
| P-BRIDGE-MIB | EnabledStatus |
| Q-BRIDGE-MIB | VlanIdOrNone |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TimeInterval, TimeStamp, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| NhwEthOam | 1.3.6.1.4.1.2011.5.25.136 | |||
| IhwEthOamMib | 1.3.6.1.4.1.2011.5.25.136.1 | |||
identity V2.44, Delete employee ID for this mib. | ||||
| NhwEthOam1ag | 1.3.6.1.4.1.2011.5.25.136.1.1 | |||
| ShwDot1agCfmEnabled | 1.3.6.1.4.1.2011.5.25.136.1.1.1 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current This object indicates whether CFM is enabled globally. The value of this object can be: Enabled: indicates that CFM is enabled globally. Disabled: indicates that global CFM is disabled | ||||
| ShwDot1agCfmVersion | 1.3.6.1.4.1.2011.5.25.136.1.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object indicates the supported CFM version. Options: 1. draft7(1) -indicates IEEE 802.1ag Draft 7. 2. standard(2) -indicates IEEE Standard 802.1ag-2007.
| ||||
| NhwDot1agCfmMdObject | 1.3.6.1.4.1.2011.5.25.136.1.1.3 | |||
| ShwDot1agCfmMdTableNextIndex | 1.3.6.1.4.1.2011.5.25.136.1.1.3.1 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current The index to the Maintenance Domain table. hwDot1agCfmMdTableNextIndex needs to be inspected to find an available index for row-creation. | ||||
| ThwDot1agCfmMdTable | 1.3.6.1.4.1.2011.5.25.136.1.1.3.2 | NA | ||
table · not-accessible · current This table is used to create a Maintenance Domain (MD). A Maintenance Domain is described in 802.1ag (3.22) as the network or the part of the network for which faults in connectivity are to be managed. The boundary of a Maintenance Domain is defined by a set of DSAPs, each of which can become a point of connectivity to a service instance. | ||||
| RhwDot1agCfmMdEntry | 1.3.6.1.4.1.2011.5.25.136.1.1.3.2.1 | NA | ||
row · not-accessible · current The Maintenance Domain table entry. This entry is not lost upon reboot. It is backed up by stable storage.
| ||||
| ChwDot1agCfmMdIndex | 1.3.6.1.4.1.2011.5.25.136.1.1.3.2.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current This object indicates the index of the MD Table. hwDot1agCfmMdTableNextIndex needs to be inspected to find an available index for row-creation. | ||||
| ChwDot1agCfmMdFormat | 1.3.6.1.4.1.2011.5.25.136.1.1.3.2.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current This object indicates the format of the MD name.
Options:
1. noMdName(1) -indicates that CCM packets have no maintenance domain name.
2. dns(2) -indicates that the maintenance domain name is CCM packets DNS name.
3. macAddress(3) -indicates that the maintenance domain name is MAC and 2-octet integer (H-H-H:U<0-65535>, 0001-0001-0001:1 for example).
4. string(4) -indicates that the maintenance domain name is in the string format.
By default, the value is string.
| ||||
| ChwDot1agCfmMdName | 1.3.6.1.4.1.2011.5.25.136.1.1.3.2.1.3 | OCTET STRING (SIZE (1..43)) | RC | |
column · OCTET STRING (SIZE (1..43)) · read-create · current This object indicates the name of the MD. The type/format of this object is determined by the value of the hwDot1agCfmMdFormat object. Each Maintenance Domain has unique name amongst all those used or available to a service provider or operator. It facilitates easy identification of administrative responsibility for each Maintenance Domain. | ||||
| ChwDot1agCfmMdMdLevel | 1.3.6.1.4.1.2011.5.25.136.1.1.3.2.1.4 | HWDot1agCfmMDLevel | RC | |
column · HWDot1agCfmMDLevel · read-create · current This object indicates the level of the MD. The value ranges from 0 to 7. The greater the value, the higher the preference. By default, the value is 0. | ||||
| ChwDot1agCfmMdMhfCreation | 1.3.6.1.4.1.2011.5.25.136.1.1.3.2.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current This object indicates whether the management entity can create MIPs for the MD.
Options:
1. defMHFnone(1) -indicates that the MIPs are not automatically created.
2. defMHFdefault(2) -indicates that the management entity automatically
creates MIPs based on certain rules.
3. defMHFexplicit(3) -indicates that the management entity automatically
creates MIPs based on certain rules.
By default, the value is defMHFnone.
| ||||
| ChwDot1agCfmMdMhfIdPermission | 1.3.6.1.4.1.2011.5.25.136.1.1.3.2.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current This object indicates what is to be included in the Sender ID TLV
transmitted by MPs configured in the MD.
Options:
1. sendIdNone(1) -indicates that the Sender ID TLV is not to be sent.
2. sendIdChassis(2) -indicates that the Sender ID TLV to be sent contains
the chassis ID information.
3. sendIdManage(3) -indicates that the Sender ID TLV to be sent contains
management address information.
4. sendIdChassisManage(4) -indicates that the Sender ID TLV to be sent
contains both chassis ID information and
management address information.
5. sendIdDefer(5) -indicates that the contents of the Sender ID TLV to be
sent are determined by the MD management entity.
By default, the value is sendIdDefer.
| ||||
| ChwDot1agCfmMdFormatName | 1.3.6.1.4.1.2011.5.25.136.1.1.3.2.1.7 | OCTET STRING (SIZE (0..43)) | RC | |
column · OCTET STRING (SIZE (0..43)) · read-create · current This object indicates the MD format name. The type/format of this object is determined by the value of the hwDot1agCfmMdFormatName object. Each Maintenance Domain has unique name amongst all those used or available to a service provider or operator. It facilitates easy identification of administrative responsibility for each Maintenance Domain. | ||||
| ChwDot1agCfmMdRowStatus | 1.3.6.1.4.1.2011.5.25.136.1.1.3.2.1.99 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the row status of this table. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated. | ||||
| NhwDot1agCfmMaObject | 1.3.6.1.4.1.2011.5.25.136.1.1.4 | |||
| ShwDot1agCfmMaNextIndex | 1.3.6.1.4.1.2011.5.25.136.1.1.4.1 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current Value to be used as the index of the MA table entries. | ||||
| ThwDot1agCfmMaTable | 1.3.6.1.4.1.2011.5.25.136.1.1.4.2 | NA | ||
table · not-accessible · current This table is used to create a Maintenance Association (MA). Each row in the table represents an MA. An MA is a set of MEPs, each configured with a single service instance. | ||||
| RhwDot1agCfmMaEntry | 1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1 | NA | ||
| ChwDot1agCfmMaIndex | 1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current This object indicates the index of the MA table. | ||||
| ChwDot1agCfmMaName | 1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.2 | OCTET STRING (SIZE (1..43)) | RC | |
column · OCTET STRING (SIZE (1..43)) · read-create · current This object indicates the name of the MA. This name MUST be unique within a maintenance domain. | ||||
| ChwDot1agCfmMaMapType | 1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current This object indicates what is associated with the MA. Options: 1. mapVlan(1) -indicates that a VLAN is associated with the current MA. 2. mapVsi(2) -indicates that a VSI is associated with the current MA. 3. mapL2vc(3) -indicates that an L2VC is associated with the current MA. 4. unbind(4) -indicates that the MA is not associated with any service instance. 5. mapCcc(5) -indicates that a CCC is associated with the current MA. By default, the value is unbind.
| ||||
| ChwDot1agCfmMaMapVlanValue | 1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.4 | VlanIdOrNone | RC | |
column · VlanIdOrNone · read-create · current This object indicates the ID of the VLAN associated with the MA. | ||||
| ChwDot1agCfmMaMapVsiName | 1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.5 | OCTET STRING (SIZE (1..31)) | RC | |
column · OCTET STRING (SIZE (1..31)) · read-create · current This object indicates the name of the VSI associated with the MA. | ||||
| ChwDot1agCfmMaMapL2vcValue | 1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.6 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current This object indicates the ID of the L2VC associated with the MA. | ||||
| ChwDot1agCfmMaMapL2vcType | 1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current This object indicates the encapsulation type of the L2VC associated with the MA.
Options:
1. invalid(1) -invalid: indicates that no display shows that the L2VC is associated
with the current MA.
2. l2vcRaw(2) -indicates that the VLAN tag is not encapsulated into the packet.
3. l2vcTagged(3) -indicates that the VLAN tag is encapsulated into the packet.
By default, the value is invalid.
| ||||
| ChwDot1agCfmMaPktPriority | 1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.8 | Integer32 (0..7) | RC | |
column · Integer32 (0..7) · read-create · current This object indicates the priority of the 802.1ag packet sent in the MA. The value ranges from 0 to 7. The greater the value is, the higher the priority is. By default, the value is 7. | ||||
| ChwDot1agCfmMaCcmInterval | 1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.9 | INTEGER | RC | |
column · INTEGER · read-create · current This object indicates the interval for an MEP in the MA to send or probe CCMs. Options: 1. interval10ms(1) -10 milliseconds 2. interval20ms(2) -20 milliseconds 3. interval30ms(3) -30 milliseconds 4. interval50ms(4) -50 milliseconds 5. interval100ms(5) -100 milliseconds 6. interval1s(6) -1 second 7. interval10s(7) -10 seconds 8. interval3Dot3ms(8) -3.3 milliseconds 9. interval1min(9) -1 minute 10. interval10min(10) -10 minutes By default, the value is 1 second.
| ||||
| ChwDot1agCfmMaRmepActiveTime | 1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.10 | Integer32 (0..600) | RC | |
column · Integer32 (0..600) · read-create · current This object indicates the time period after which RMEP configurations are to be activated. The value ranges from 0 to 600 in seconds. By default, the value is 0. | ||||
| ChwDot1agCfmMaMepFngAlarmTime | 1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.11 | Integer32 (0..30000) | RC | |
column · Integer32 (0..30000) · read-create · current This object indicates the delay for the RMEP to send trap messages. The value must be an integer multiple of 500, for example, 500, 1000, or 1500. The value ranges from 0 to 30000 in milliseconds. By default, the value is 2500. | ||||
| ChwDot1agCfmMaMepFngResetTime | 1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.12 | Integer32 (0..30000) | RC | |
column · Integer32 (0..30000) · read-create · current This object indicates the delay for the RMEP to send alarm clearance messages after the fault is rectified. The value must be an integer multiple of 500, for example, 500, 1000, or 1500. The value ranges from 0 to 30000 in milliseconds. By default, the value is 10000. | ||||
| ChwDot1agCfmMaFormat | 1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.13 | INTEGER | RC | |
column · INTEGER · read-create · current This object indicates the format of the MA name. Options: 1. string(2) -indicates that the format of the MA name is string. 2. iccBased(32) -indicates that the format of the MA name is ICC-based. By default, the value is string.
| ||||
| ChwDot1agCfmMaFormatName | 1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.14 | OCTET STRING (SIZE (1..43)) | RC | |
column · OCTET STRING (SIZE (1..43)) · read-create · current This object indicates the MA format name. The type/format of this object is determined by the value of the hwDot1agCfmMaFormatName object. | ||||
| ChwDot1agCfmMaMapCccName | 1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.15 | OCTET STRING (SIZE (1..20)) | RC | |
column · OCTET STRING (SIZE (1..20)) · read-create · current This object indicates the name of the CCC associated with the MA. | ||||
| ChwDot1agCfmMaRowStatus | 1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.99 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the row status of this table. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated. | ||||
| NhwDot1agCfmMepObject | 1.3.6.1.4.1.2011.5.25.136.1.1.5 | |||
| ThwDot1agCfmMepTable | 1.3.6.1.4.1.2011.5.25.136.1.1.5.1 | NA | ||
table · not-accessible · current This table is used to create a Maintenance Association End Point (MEP). | ||||
| RhwDot1agCfmMepEntry | 1.3.6.1.4.1.2011.5.25.136.1.1.5.1.1 | NA | ||
row · not-accessible · current The MEP table entry. | ||||
| ChwDot1agCfmMepIdentifier | 1.3.6.1.4.1.2011.5.25.136.1.1.5.1.1.1 | Integer32 (1..8191) | AN | |
column · Integer32 (1..8191) · accessible-for-notify · current This object indicates the ID of the MEP. Integer that is unique among all the MEPs in the same MA. MEP Identifier is also known as the MEPID. The value ranges from 1 to 8191. | ||||
| ChwDot1agCfmMepIsVlanType | 1.3.6.1.4.1.2011.5.25.136.1.1.5.1.1.2 | TruthValue | RC | |
column · TruthValue · read-create · current This object indicates whether the MEP in the MA is a VLAN-based MEP. If the MEP is a VLAN-based MEP, the MA must have been associated with a VLAN and the interface and VLAN information need not be configured. If the MEP is not a VLAN-based MEP, entry creation fails. | ||||
| ChwDot1agCfmMepIfIndex | 1.3.6.1.4.1.2011.5.25.136.1.1.5.1.1.3 | InterfaceIndexOrZero | RC | |
column · InterfaceIndexOrZero · read-create · current This object indicates the interface to which the MEP is bound. The interface is either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, to which the MEP is attached. By default, the value of IfIndex is 0. | ||||
| ChwDot1agCfmMepDot1qVlan | 1.3.6.1.4.1.2011.5.25.136.1.1.5.1.1.4 | VlanIdOrNone | RC | |
column · VlanIdOrNone · read-create · current This object indicates the VLAN to which the interface that the MEP is bound to belong. | ||||
| ChwDot1agCfmMepPeVlan | 1.3.6.1.4.1.2011.5.25.136.1.1.5.1.1.5 | VlanIdOrNone | RC | |
column · VlanIdOrNone · read-create · current This object indicates the QinQ PE VLAN bound to the MEP. | ||||
| ChwDot1agCfmMepCeVlan | 1.3.6.1.4.1.2011.5.25.136.1.1.5.1.1.6 | VlanIdOrNone | RC | |
column · VlanIdOrNone · read-create · current This object indicates the QinQ CE VLAN bound to the MEP. | ||||
| ChwDot1agCfmMepDirection | 1.3.6.1.4.1.2011.5.25.136.1.1.5.1.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current This object indicates the direction in which the MEP sends the 802.1ag
protocol packets.
Options:
1. invalid(1) -indicates the invalid value.
2. dirInward(2) -indicates that the 802.1ag protocol packets sent by an
inward-facing MEP are transmitted through all the interfaces
in the VLAN associated with the current MA (except the
interface where the MEP resides). That is, an inward-facing
MEP broadcasts the 802.1ag protocol packets in the VLAN
associated with the current MA.
3. dirOutward(3) -indicates that the 802.1ag protocol packets sent by an
outward-facing MEP are transmitted directly through the
interface on which the MEP resides.
By default, the value is invalid.
| ||||
| ChwDot1agCfmMepCcmSendEnabled | 1.3.6.1.4.1.2011.5.25.136.1.1.5.1.1.8 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current This object indicates whether CCM sending is enabled on the MEP in an MA. The value of this object can be: enabled disabled By default, the value is disabled. | ||||
| ChwDot1agCfmMepMacAddress | 1.3.6.1.4.1.2011.5.25.136.1.1.5.1.1.9 | MacAddress | RO | |
column · MacAddress · read-only · current This object indicates the MAC address of an MEP. | ||||
| ChwDot1agCfmMepRowStatus | 1.3.6.1.4.1.2011.5.25.136.1.1.5.1.1.99 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the row status of this table. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated. | ||||
| NhwDot1agCfmRMepObject | 1.3.6.1.4.1.2011.5.25.136.1.1.6 | |||
| ThwDot1agCfmRMepTable | 1.3.6.1.4.1.2011.5.25.136.1.1.6.1 | NA | ||
table · not-accessible · current This table is used to create a Remote Maintenance Association End Point (RMEP). | ||||
| RhwDot1agCfmRMepEntry | 1.3.6.1.4.1.2011.5.25.136.1.1.6.1.1 | NA | ||
row · not-accessible · current The remote MEP table entity. | ||||
| ChwDot1agCfmRMepIdentifier | 1.3.6.1.4.1.2011.5.25.136.1.1.6.1.1.1 | Integer32 (1..8191) | AN | |
column · Integer32 (1..8191) · accessible-for-notify · current This object indicates the ID of the RMEP. The value ranges from 1 to 8191. | ||||
| ChwDot1agCfmRMepMacAddress | 1.3.6.1.4.1.2011.5.25.136.1.1.6.1.1.2 | MacAddress | RC | |
column · MacAddress · read-create · current This object indicates the MAC address of the interface the RMEP resides. | ||||
| ChwDot1agCfmRMepCcmRecvEnabled | 1.3.6.1.4.1.2011.5.25.136.1.1.6.1.1.3 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current This object indicates whether CCM receiving is enabled on the current device. The value can be: enabled disabled By default, the value is disabled. | ||||
| ChwDot1agCfmRMepStateIsUp | 1.3.6.1.4.1.2011.5.25.136.1.1.6.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the CFM status. Options: 1. up(1) -indicates that the CFM status is Up. 2. down(2) -indicates that the CFM status is Down. 3. invalid(3) -indicates that the CFM status is not enabled.
| ||||
| ChwDot1agCfmRMepHighestPrDefect | 1.3.6.1.4.1.2011.5.25.136.1.1.6.1.1.5 | HWDot1agCfmHighestDefectPri | RO | |
column · HWDot1agCfmHighestDefectPri · read-only · current This object indicates the severity level of the fault on an RMEP. If the CFM status is Up, this object is displayed as none. | ||||
| ChwDot1agCfmRMepRowStatus | 1.3.6.1.4.1.2011.5.25.136.1.1.6.1.1.99 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the row status of this table. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated. | ||||
| NhwDot1agCfmMipObject | 1.3.6.1.4.1.2011.5.25.136.1.1.7 | |||
| ThwDot1agCfmMipTable | 1.3.6.1.4.1.2011.5.25.136.1.1.7.1 | NA | ||
table · not-accessible · current This table is used to display information about a Maintenance Association Intermediate Point (MIP). | ||||
| RhwDot1agCfmMipEntry | 1.3.6.1.4.1.2011.5.25.136.1.1.7.1.1 | NA | ||
| ChwDot1agCfmMipIfIndex | 1.3.6.1.4.1.2011.5.25.136.1.1.7.1.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current This object indicates the interface on which the MIP resides. | ||||
| ChwDot1agCfmMipLevel | 1.3.6.1.4.1.2011.5.25.136.1.1.7.1.1.2 | HWDot1agCfmMDLevel | RO | |
column · HWDot1agCfmMDLevel · read-only · current This object indicates the level of the MIP. The value ranges from 0 to 7. | ||||
| ChwDot1agCfmMipIfMacAddress | 1.3.6.1.4.1.2011.5.25.136.1.1.7.1.1.3 | MacAddress | RO | |
column · MacAddress · read-only · current This object indicates the MAC address of the interface on which the MIP resides. | ||||
| NhwDot1agCfmMacPingObject | 1.3.6.1.4.1.2011.5.25.136.1.1.8 | |||
| ThwDot1agCfmMacPingTable | 1.3.6.1.4.1.2011.5.25.136.1.1.8.1 | NA | ||
table · not-accessible · current The entries related to the Mac Ping include the parameters input by users and the returned results. | ||||
| RhwDot1agCfmMacPingEntry | 1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1 | NA | ||
row · not-accessible · current This table is used to configure the MAC ping function. | ||||
| ChwDot1agCfmMacPingIndex | 1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current This object indicates the index of this table. | ||||
| ChwDot1agCfmMacPingState | 1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.2 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current This object indicates whether the MAC ping function is enabled. The value can be: enabled disabled By default, the value is disabled. | ||||
| ChwDot1agCfmMacPingMdName | 1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.3 | OCTET STRING (SIZE (1..43)) | RC | |
column · OCTET STRING (SIZE (1..43)) · read-create · current This object indicates the name of the MD where MAC ping is performed. | ||||
| ChwDot1agCfmMacPingMaName | 1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.4 | OCTET STRING (SIZE (1..43)) | RC | |
column · OCTET STRING (SIZE (1..43)) · read-create · current This object indicates the name of the MA where MAC ping is performed. | ||||
| ChwDot1agCfmMacPingMepId | 1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.5 | Integer32 (0 | 1..8191) | RC | |
column · Integer32 (0 | 1..8191) · read-create · current This object indicates the ID of the local MEP of the 802.1ag MAC ping operation. The value ranges from 1 to 8191. By default, the value is 0. | ||||
| ChwDot1agCfmMacPingDestIsMepId | 1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.6 | TruthValue | RC | |
column · TruthValue · read-create · current This object indicates whether the destination MAC address of the LBM is the MAC address of the interface on which the RMEP resides. | ||||
| ChwDot1agCfmMacPingDestMepId | 1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.7 | Integer32 (0 | 1..8191) | RC | |
column · Integer32 (0 | 1..8191) · read-create · current This object indicates the ID of the destination RMEP of the 802.1ag MAC ping operation. The value ranges from 1 to 8191. By default, the value is 0. | ||||
| ChwDot1agCfmMacPingMacAddress | 1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.8 | MacAddress | RC | |
column · MacAddress · read-create · current This object indicates the destination MAC address of the LBM. | ||||
| ChwDot1agCfmMacPingOutIfIndex | 1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.9 | InterfaceIndexOrZero | RC | |
column · InterfaceIndexOrZero · read-create · current This object indicates the outbound interface that sends the LBM. | ||||
| ChwDot1agCfmMacPingTimeOut | 1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.10 | Unsigned32 (1..65535) | RC | |
column · Unsigned32 (1..65535) · read-create · current This object indicates the timeout period for waiting for the LBR. The value ranges from 1 to 65535 in milliseconds. By default, the value is 2000. | ||||
| ChwDot1agCfmMacPingCount | 1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.11 | Unsigned32 (1..4294967295) | RC | |
column · Unsigned32 (1..4294967295) · read-create · current This object indicates the number of ping operation times. The value ranges from 1 to 4294967295. By default, the value is 5. | ||||
| ChwDot1agCfmMacPingPacketSize | 1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.12 | Integer32 (64..9500) | RC | |
column · Integer32 (64..9500) · read-create · current This object indicates the length of the LBM. The value ranges from 64 to 9500. By default, the value is 95. | ||||
| ChwDot1agCfmMacPingPriority | 1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.13 | Integer32 (0..7 | 255) | RC | |
column · Integer32 (0..7 | 255) · read-create · current This object indicates the priority of the sent LBM packet. The value ranges from 0 to 7 or can be 255. The value 255 is an invalid value. If the value is set to 255, this value should be identical with the priority value of the MA which the MEP belongs to. The greater the value is, the higher the priority is. | ||||
| ChwDot1agCfmMacPingSendPacketNum | 1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.14 | Counter32 | RO | |
column · Counter32 · read-only · current This object indicates the number of sent LBMs. | ||||
| ChwDot1agCfmMacPingRecvPacketNum | 1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current This object indicates the number of received LBRs. | ||||
| ChwDot1agCfmMacPingPacketLossRatio | 1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.16 | Unsigned32 (0..100) | RO | |
column · Unsigned32 (0..100) · read-only · current This object indicates the frame loss ratio on the physical link. The value ranges from 0 to 100. | ||||
| ChwDot1agCfmMacPingRecvTimeDelayMin | 1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.17 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the minimum delay in receiving the LBM. | ||||
| ChwDot1agCfmMacPingRecvTimeDelayMax | 1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.18 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the maximum delay in receiving the LBM. | ||||
| ChwDot1agCfmMacPingRecvTimeDelayAvg | 1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.19 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the average delay in receiving the LBM. | ||||
| ChwDot1agCfmMacPingRowStatus | 1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.99 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the row status of this table. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated. | ||||
| NhwDot1agCfmMacTraceObjects | 1.3.6.1.4.1.2011.5.25.136.1.1.9 | |||
| ThwDot1agCfmMacTraceTable | 1.3.6.1.4.1.2011.5.25.136.1.1.9.1 | NA | ||
table · not-accessible · current This table is used to configure the MAC trace function. | ||||
| RhwDot1agCfmMacTraceEntry | 1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1 | NA | ||
| ChwDot1agCfmMacTraceIndex | 1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current This object indicates the index of this table. | ||||
| ChwDot1agCfmMacTraceState | 1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.2 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current This object indicates whether the MAC trace function is enabled. The value can be: enabled disabled By default, the value is disabled. | ||||
| ChwDot1agCfmMacTraceMdName | 1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.3 | OCTET STRING (SIZE (1..43)) | RC | |
column · OCTET STRING (SIZE (1..43)) · read-create · current This object indicates the name of the MD where MAC trace is performed. | ||||
| ChwDot1agCfmMacTraceMaName | 1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.4 | OCTET STRING (SIZE (1..43)) | RC | |
column · OCTET STRING (SIZE (1..43)) · read-create · current This object indicates the name of the MA where MAC trace is performed. | ||||
| ChwDot1agCfmMacTraceMepId | 1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.5 | Integer32 (0 | 1..8191) | RC | |
column · Integer32 (0 | 1..8191) · read-create · current This object indicates the ID of the local MEP of the 802.1ag MAC trace operation. The value ranges from 1 to 8191. By default, the value is 0. | ||||
| ChwDot1agCfmMacTraceDestIsMepId | 1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.6 | TruthValue | RC | |
column · TruthValue · read-create · current This object indicates whether the destination MAC address of the LTM is the MAC address of the interface on which the RMEP resides. | ||||
| ChwDot1agCfmMacTraceDestMepId | 1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.7 | Integer32 (0 | 1..8191) | RC | |
column · Integer32 (0 | 1..8191) · read-create · current This object indicates the ID of the destination RMEP of the 802.1ag MAC trace operation. The value ranges from 1 to 8191. By default, the value is 0. | ||||
| ChwDot1agCfmMacTraceMacAddress | 1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.8 | MacAddress | RC | |
column · MacAddress · read-create · current This object indicates the destination MAC address of the LTM. | ||||
| ChwDot1agCfmMacTraceOutIfIndex | 1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.9 | InterfaceIndexOrZero | RC | |
column · InterfaceIndexOrZero · read-create · current This object indicates the outbound interface that sends the LTM. | ||||
| ChwDot1agCfmMacTraceTimeOut | 1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.10 | Unsigned32 (1..65535) | RC | |
column · Unsigned32 (1..65535) · read-create · current This object indicates the timeout period for waiting for the LTR. The value ranges from 1 to 65535, in milliseconds. By default, the value is 2000. | ||||
| ChwDot1agCfmMacTraceTTL | 1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.11 | Unsigned32 (1..255) | RC | |
column · Unsigned32 (1..255) · read-create · current This object indicates the TTL value of the 802.1ag MAC trace operation. The value ranges from 1 to 255. By default, the value is 64. | ||||
| ChwDot1agCfmMacTraceSendSeqNumber | 1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.12 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the sequence number of the sent LTR. | ||||
| ChwDot1agCfmMacTraceResult | 1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the result of the MAC trace operation. Options: 1. invalid(1) -indicates that the MAC trace operation is invalid. 2. successful(2) -indicates that the MAC trace operation succeeds. 3. failed(3) -indicates that the MAC trace operation fails.
| ||||
| ChwDot1agCfmMacTraceRowStatus | 1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.99 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the row status of this table. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated. | ||||
| ThwDot1agCfmMacTraceReplyTable | 1.3.6.1.4.1.2011.5.25.136.1.1.9.2 | NA | ||
table · not-accessible · current This table is used to display information about the LTR for responding to the MAC trace operation. | ||||
| RhwDot1agCfmMacTraceReplyEntry | 1.3.6.1.4.1.2011.5.25.136.1.1.9.2.1 | NA | ||
row · not-accessible · current The Mac Trace result table entry. | ||||
| ChwDot1agCfmMacTraceReplySeqNumber | 1.3.6.1.4.1.2011.5.25.136.1.1.9.2.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current This object indicates the index of this table. The value is the sequence number of the LTR. | ||||
| ChwDot1agCfmMacTraceReplyRecvOrder | 1.3.6.1.4.1.2011.5.25.136.1.1.9.2.1.2 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current This object indicates the index of this table. The value is the sequence in which the MAC trace results are displayed. | ||||
| ChwDot1agCfmMacTraceReplyTTL | 1.3.6.1.4.1.2011.5.25.136.1.1.9.2.1.3 | Unsigned32 (0..255) | RO | |
column · Unsigned32 (0..255) · read-only · current This object indicates the TTL of the LTR. The value ranges from 0 to 255. | ||||
| ChwDot1agCfmMacTraceReplyForwarded | 1.3.6.1.4.1.2011.5.25.136.1.1.9.2.1.4 | TruthValue | RO | |
column · TruthValue · read-only · current This object indicates whether the device that sends the LTR keeps on forwarding LTMs. | ||||
| ChwDot1agCfmMacTraceReplyTerminalMep | 1.3.6.1.4.1.2011.5.25.136.1.1.9.2.1.5 | TruthValue | RO | |
column · TruthValue · read-only · current This object indicates whether the LTR is sent by an MEP. | ||||
| ChwDot1agCfmMacTraceReplyRelayAction | 1.3.6.1.4.1.2011.5.25.136.1.1.9.2.1.6 | HWDot1agCfmRelayActionFieldValue | RO | |
column · HWDot1agCfmRelayActionFieldValue · read-only · current This object indicates the value of the Relay Action field in the LTR. | ||||
| ChwDot1agCfmMacTraceReplyIngressAction | 1.3.6.1.4.1.2011.5.25.136.1.1.9.2.1.7 | HWDot1agCfmIngressActionFieldValue | RO | |
column · HWDot1agCfmIngressActionFieldValue · read-only · current This object indicates the value of the Ingress Action field in the LTR. | ||||
| ChwDot1agCfmMacTraceReplyIngressMac | 1.3.6.1.4.1.2011.5.25.136.1.1.9.2.1.8 | MacAddress | RO | |
column · MacAddress · read-only · current This object indicates the physical MAC address carried in the ingress MAC address field in the LTR. | ||||
| ChwDot1agCfmMacTraceReplyIngressIfName | 1.3.6.1.4.1.2011.5.25.136.1.1.9.2.1.9 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current This object indicates the name of the inbound interface of the LTR. | ||||
| ChwDot1agCfmMacTraceReplyEgressAction | 1.3.6.1.4.1.2011.5.25.136.1.1.9.2.1.10 | HWDot1agCfmEgressActionFieldValue | RO | |
column · HWDot1agCfmEgressActionFieldValue · read-only · current This object indicates the value of the Egress Action field in the LTR. | ||||
| ChwDot1agCfmMacTraceReplyEgressMac | 1.3.6.1.4.1.2011.5.25.136.1.1.9.2.1.11 | MacAddress | RO | |
column · MacAddress · read-only · current This object indicates the physical MAC address carried in the egress MAC address field in the LTR. | ||||
| ChwDot1agCfmMacTraceReplyEgressIfName | 1.3.6.1.4.1.2011.5.25.136.1.1.9.2.1.12 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current This object indicates the name of the interface that forwards the LTR. | ||||
| NhwDot1agCfmQueryObject | 1.3.6.1.4.1.2011.5.25.136.1.1.10 | |||
| ThwDot1agCfmQueryMdIndexTable | 1.3.6.1.4.1.2011.5.25.136.1.1.10.1 | NA | ||
table · not-accessible · current This table is used to get the index of the Maintenance Domain table. | ||||
| RhwDot1agCfmQueryMdIndexEntry | 1.3.6.1.4.1.2011.5.25.136.1.1.10.1.1 | NA | ||
| ChwDot1agCfmQueryMdName | 1.3.6.1.4.1.2011.5.25.136.1.1.10.1.1.1 | OCTET STRING (SIZE (1..43)) | NA | |
column · OCTET STRING (SIZE (1..43)) · not-accessible · current This object indicates the name of the Maintenance Domain. | ||||
| ChwDot1agCfmQueryMdIndex | 1.3.6.1.4.1.2011.5.25.136.1.1.10.1.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the index to the Maintenance Domain table. | ||||
| ThwDot1agCfmQueryMaIndexTable | 1.3.6.1.4.1.2011.5.25.136.1.1.10.2 | NA | ||
table · not-accessible · current This table is used to get the index of the Maintenance Association table. | ||||
| RhwDot1agCfmQueryMaIndexEntry | 1.3.6.1.4.1.2011.5.25.136.1.1.10.2.1 | NA | ||
row · not-accessible · current The Ma Index table entry. | ||||
| ChwDot1agCfmQueryMaName | 1.3.6.1.4.1.2011.5.25.136.1.1.10.2.1.1 | OCTET STRING (SIZE (1..43)) | NA | |
column · OCTET STRING (SIZE (1..43)) · not-accessible · current This object indicates the name of Maintenance Association. | ||||
| ChwDot1agCfmQueryMaIndex | 1.3.6.1.4.1.2011.5.25.136.1.1.10.2.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the index to the Maintenance Association table. | ||||
| NhwDot1agCfmGmacTraceObjects | 1.3.6.1.4.1.2011.5.25.136.1.1.11 | |||
| ShwDot1agCfmGmacTraceEnabled | 1.3.6.1.4.1.2011.5.25.136.1.1.11.1 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current This object indicates whether GMAC trace function is enabled globally. The value of this object can be: Enabled: indicates that GMAC trace function is enabled globally. Disabled: indicates that GMAC trace function is disabled globally. | ||||
| ThwDot1agCfmGmacTraceTable | 1.3.6.1.4.1.2011.5.25.136.1.1.11.2 | NA | ||
table · not-accessible · current This table is used to configure the GMAC trace function. | ||||
| RhwDot1agCfmGmacTraceEntry | 1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1 | NA | ||
| ChwDot1agCfmGmacTraceIndex | 1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current This object indicates the index of this table. | ||||
| ChwDot1agCfmGmacTraceState | 1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.2 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current This object indicates whether the GMAC trace function is enabled. The value can be: enabled disabled By default, the value is disabled. | ||||
| ChwDot1agCfmGmacTraceMacAddress | 1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.3 | MacAddress | RC | |
column · MacAddress · read-create · current This object indicates the destination MAC address of the LTM. | ||||
| ChwDot1agCfmGmacTraceServiceType | 1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current This object indicates the service type associated with the gmac trace.
Options:
1. vlan(1) -indicates that a VLAN is associated with the gmac trace.
2. invalid(255) -indicates that no service type is specified for the gmac trace.
By default, the value is invalid.
| ||||
| ChwDot1agCfmGmacTraceVlanValue | 1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.5 | VlanIdOrNone | RC | |
column · VlanIdOrNone · read-create · current This object indicates the VLAN to the destination MAC address. | ||||
| ChwDot1agCfmGmacTraceVsiName | 1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.6 | OCTET STRING (SIZE (1..31)) | RC | |
column · OCTET STRING (SIZE (1..31)) · read-create · current This object indicates the name of the VSI associated with the GMAC trace. | ||||
| ChwDot1agCfmGmacTraceL2vcValue | 1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.7 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current This object indicates the ID of the L2VC associated with the GMAC trace. | ||||
| ChwDot1agCfmGmacTraceL2vcType | 1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current This object indicates the encapsulation type of the L2VC associated with the gmac trace.
Options:
1. invalid(1) -indicates that no display shows that the L2VC is associated
with the current gmac trace.
2. l2vcRaw(2) -indicates that the VLAN tag is not encapsulated into the packet.
3. l2vcTagged(3) -indicates that the VLAN tag is encapsulated into the packet.
By default, the value is invalid.
| ||||
| ChwDot1agCfmGmacTraceDot1qVlan | 1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.9 | VlanIdOrNone | RC | |
column · VlanIdOrNone · read-create · current This object indicates the DOT1Q VLAN ID to the destination MAC address. | ||||
| ChwDot1agCfmGmacTracePeVlan | 1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.10 | VlanIdOrNone | RC | |
column · VlanIdOrNone · read-create · current This object indicates the QinQ PE VLAN bound to the GMAC trace. | ||||
| ChwDot1agCfmGmacTraceCeVlan | 1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.11 | VlanIdOrNone | RC | |
column · VlanIdOrNone · read-create · current This object indicates the QinQ CE VLAN bound to the GMAC trace. | ||||
| ChwDot1agCfmGmacTraceOutIfIndex | 1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.12 | InterfaceIndexOrZero | RC | |
column · InterfaceIndexOrZero · read-create · current This object indicates the outbound interface that sends the LTM. | ||||
| ChwDot1agCfmGmacTraceTimeOut | 1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.13 | Unsigned32 (1..65535) | RC | |
column · Unsigned32 (1..65535) · read-create · current This object indicates the timeout period for waiting for the LTR. The value ranges from 1 to 65535, in milliseconds. By default, the value is 2000. | ||||
| ChwDot1agCfmGmacTraceDisplayHostInfo | 1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.14 | TruthValue | RC | |
column · TruthValue · read-create · current This object indicates whether the LTR include host information. | ||||
| ChwDot1agCfmGmacTraceSendSeqNumber | 1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.15 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the sequence number of the sent LTR. | ||||
| ChwDot1agCfmGmacTraceResult | 1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.16 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the result of the GMAC trace operation.
Options:
1. invalid(1) -indicates that the GMAC trace operation is invalid.
2. successful(2) -indicates that the GMAC trace operation succeeds.
3. failed(3) -indicates that the GMAC trace operation fails.
| ||||
| ChwDot1agCfmGmacTraceRowStatus | 1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.99 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the row status of this table. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated. | ||||
| ThwDot1agCfmGmacTraceReplyTable | 1.3.6.1.4.1.2011.5.25.136.1.1.11.3 | NA | ||
table · not-accessible · current This table is used to display information about the LTR for responding to the GMAC trace operation. | ||||
| RhwDot1agCfmGmacTraceReplyEntry | 1.3.6.1.4.1.2011.5.25.136.1.1.11.3.1 | NA | ||
row · not-accessible · current The GMAC Trace result table entry. | ||||
| ChwDot1agCfmGmacTraceReplySeqNumber | 1.3.6.1.4.1.2011.5.25.136.1.1.11.3.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current This object indicates the index of this table. The value is the sequence number of the LTR. | ||||
| ChwDot1agCfmGmacTraceReplyRecvOrder | 1.3.6.1.4.1.2011.5.25.136.1.1.11.3.1.2 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current This object indicates the index of this table. The value is the sequence in which the GMAC trace results are displayed. | ||||
| ChwDot1agCfmGmacTraceReplyTTL | 1.3.6.1.4.1.2011.5.25.136.1.1.11.3.1.3 | Unsigned32 (0..255) | RO | |
column · Unsigned32 (0..255) · read-only · current This object indicates the TTL of the LTR. The value ranges from 0 to 255. | ||||
| ChwDot1agCfmGmacTraceReplyForwarded | 1.3.6.1.4.1.2011.5.25.136.1.1.11.3.1.4 | TruthValue | RO | |
column · TruthValue · read-only · current This object indicates whether the device that sends the LTR keeps on forwarding LTMs. | ||||
| ChwDot1agCfmGmacTraceReplyHostInfo | 1.3.6.1.4.1.2011.5.25.136.1.1.11.3.1.5 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current This object indicates the host name and IP address of each hop. | ||||
| ChwDot1agCfmGmacTraceReplyRelayAction | 1.3.6.1.4.1.2011.5.25.136.1.1.11.3.1.6 | HWDot1agCfmRelayActionFieldValue | RO | |
column · HWDot1agCfmRelayActionFieldValue · read-only · current This object indicates the value of the Relay Action field in the LTR. | ||||
| ChwDot1agCfmGmacTraceReplyIngressAction | 1.3.6.1.4.1.2011.5.25.136.1.1.11.3.1.7 | HWDot1agCfmIngressActionFieldValue | RO | |
column · HWDot1agCfmIngressActionFieldValue · read-only · current This object indicates the value of the Ingress Action field in the LTR. | ||||
| ChwDot1agCfmGmacTraceReplyIngressMac | 1.3.6.1.4.1.2011.5.25.136.1.1.11.3.1.8 | MacAddress | RO | |
column · MacAddress · read-only · current This object indicates the physical MAC address carried in the ingress MAC address field in the LTR. | ||||
| ChwDot1agCfmGmacTraceReplyIngressIfName | 1.3.6.1.4.1.2011.5.25.136.1.1.11.3.1.9 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current This object indicates the name of the inbound interface of the LTR. | ||||
| ChwDot1agCfmGmacTraceReplyEgressAction | 1.3.6.1.4.1.2011.5.25.136.1.1.11.3.1.10 | HWDot1agCfmEgressActionFieldValue | RO | |
column · HWDot1agCfmEgressActionFieldValue · read-only · current This object indicates the value of the Egress Action field in the LTR. | ||||
| ChwDot1agCfmGmacTraceReplyEgressMac | 1.3.6.1.4.1.2011.5.25.136.1.1.11.3.1.11 | MacAddress | RO | |
column · MacAddress · read-only · current This object indicates the physical MAC address carried in the egress MAC address field in the LTR. | ||||
| ChwDot1agCfmGmacTraceReplyEgressIfName | 1.3.6.1.4.1.2011.5.25.136.1.1.11.3.1.12 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current This object indicates the name of the interface that forwards the LTR. | ||||
| ShwDot1agCfmMPAddressModel | 1.3.6.1.4.1.2011.5.25.136.1.1.101 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object indicates the MP address model of the CFM. Options: 1. bridge(1) -indicates bridge MAC MP address model. 2. individual(2) -indicates individual MP address model.
| ||||
| NhwEthOam3ah | 1.3.6.1.4.1.2011.5.25.136.1.2 | |||
| ShwDot3ahEfmEnabled | 1.3.6.1.4.1.2011.5.25.136.1.2.1 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current Enable the EFM globally. | ||||
| NhwDot3ahEfmObject | 1.3.6.1.4.1.2011.5.25.136.1.2.2 | |||
| ThwDot3ahEfmDetectModeTable | 1.3.6.1.4.1.2011.5.25.136.1.2.2.1 | NA | ||
table · not-accessible · current Set the detection mode table in the last one kilometer on the interface. | ||||
| RhwDot3ahEfmDetectModeEntry | 1.3.6.1.4.1.2011.5.25.136.1.2.2.1.1 | NA | ||
row · not-accessible · current Set the detection mode entity in the last one kilometer on the interface.
| ||||
| ChwDot3ahEfmDetectMode | 1.3.6.1.4.1.2011.5.25.136.1.2.2.1.1.11 | HWDetectType | RW | |
column · HWDetectType · read-write · current Detection mode ( fast detection and standard detection) | ||||
| ChwDot3ahEfmDetectInterval | 1.3.6.1.4.1.2011.5.25.136.1.2.2.1.1.12 | TimeInterval | RW | |
column · TimeInterval · read-write · current Time interval of detection | ||||
| ChwDot3ahEfmDetectMalfunction | 1.3.6.1.4.1.2011.5.25.136.1.2.2.1.1.13 | Integer32 (0..768) | RO | |
column · Integer32 (0..768) · read-only · current Failure description from 802.3ah and from associated modules. | ||||
| ThwDot3ahEfmTable | 1.3.6.1.4.1.2011.5.25.136.1.2.2.2 | NA | ||
table · not-accessible · current This table contains the primary controls and status for the OAM capabilities of an Ethernet like interface. There will be one row in this table for each Ethernet like interface in the system that supports the OAM functions defined in [802.3ah]. | ||||
| RhwDot3ahEfmEntry | 1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1 | NA | ||
row · not-accessible · current An entry in the table, containing information on the Ethernet OAM function for a single Ethernet like interface. Entries in the table are created automatically for each interface supporting Ethernet OAM. The status of the row entry can be determined from hwDot3ahEfmOperStatus. A hwDot3ahEfmEntry is indexed in the hwDot3ahEfmTable by the ifIndex object of the Interfaces MIB.
| ||||
| ChwDot3ahEfmAdminState | 1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1.1 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current This object is used to provision the default administrative OAM mode for this interface. This object represents the desired state of OAM for this interface. The hwDot3ahEfmAdminState always starts in the disabled(2) state until an explicit management action or configuration information retained by the system causes a transition to the enabled(1) state. When enabled(1), Ethernet OAM will attempt to operate over this interface. | ||||
| ChwDot3ahEfmOperStatus | 1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current At initialization and failure conditions, two OAM entities on the same full-duplex Ethernet link begin a discovery phase to determine what OAM capabilities may be used on that link. Options: 1. disabled(1) -indicates that the type of the EfmOperStatus is disabled. 2. linkFault(2) -indicates that the type of the EfmOperStatus is linkFault. 3. passiveWait(3) -indicates that the type of the EfmOperStatus is passiveWait. 4. activeSendLocal(4) -indicates that the type of the EfmOperStatus is activeSendLocal. 5. sendLocalAndRemote(5) -indicates that the type of the EfmOperStatus is sendLocalAndRemote. 6. sendLocalAndRemoteOk(6) -indicates that the type of the EfmOperStatus is sendIdNone. 7. oamPeeringLocallyRejected(7) -indicates that the type of the EfmOperStatus is sendLocalAndRemoteOk. 8. oamPeeringRemotelyRejected(8) -indicates that the type of the EfmOperStatus is oamPeeringRemotelyRejected. 9. operational(9) -indicates that the type of the EfmOperStatus is operational. 10. nonOperHalfDuplex(10) -indicates that the type of the EfmOperStatus is nonOperHalfDuplex.
| ||||
| ChwDot3ahEfmMode | 1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current This object configures the mode of OAM operation for this Ethernet like interface. OAM on Ethernet interfaces may be in 'active' mode or 'passive' mode. Options: 1. active(1) -indicates that OAM on Ethernet interfaces is in active mode. 2. passive(2) -indicates that OAM on Ethernet interfaces is in passive mode.
| ||||
| ChwDot3ahEfmMaxOamPduSize | 1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1.4 | Unsigned32 (64..1518) | RO | |
column · Unsigned32 (64..1518) · read-only · current The largest OAMPDU that the OAM entity supports. OAM entities exchange maximum OAMPDU sizes and negotiate to use the smaller of the two maximum OAMPDU sizes between the peers. This value is determined by the local implementation.
| ||||
| ChwDot3ahEfmConfigRevision | 1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1.5 | Unsigned32 (0..65535) | RO | |
column · Unsigned32 (0..65535) · read-only · current The configuration revision of the OAM entity as reflected in the latest OAMPDU sent by the OAM entity. The config revision is used by OAM entities to indicate configuration changes have occurred which might require the peer OAM entity to re-evaluate whether OAM peering is allowed. | ||||
| ChwDot3ahEfmFunctionsSupported | 1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1.6 | Bits | RO | |
column · Bits · read-only · current The OAM functions supported on this Ethernet like interface. OAM consists of separate functional sets beyond the basic discovery process which is always required. These functional groups can be supported independently by any implementation. These values are communicated to the peer via the local configuration field of Information OAMPDUs. Setting 'unidirectionalSupport(0)' indicates that the OAM entity supports the transmission of OAMPDUs on links that are operating in unidirectional mode (traffic flowing in one direction only). Setting 'loopbackSupport(1)' indicates the OAM entity can initiate and respond to loopback commands. Setting 'eventSupport(2)' indicates the OAM entity can send and receive Event Notification OAMPDUs. Setting 'variableSupport(3)' indicates the OAM entity can send and receive Variable Request and Response OAMPDUs.
| ||||
| ChwDot3ahEfmTimeout | 1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1.7 | Unsigned32 (300..30000) | RW | |
column · Unsigned32 (300..30000) · read-write · current The EFM Timeout object defines the max time that the EFM session stays in detect mode since the last OAMPDU received. if there's no OAMPDU received within the time the timeout value defines, the EFM session will turn into discovery state. The value of EFM Timeout should be three or more times the value of the sending interval of the peer interface. The timeout value must be an exact integral multiple of 100. Range: 300-30000 Default: 5000 Unit: milliseconds
| ||||
| ChwDot3ahEfmInterval | 1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1.8 | Unsigned32 (100..1000) | RW | |
column · Unsigned32 (100..1000) · read-write · current The EFM interval object defines the interval of sending OAM PDUs. The value of EFM interval should be the same as the value of the peer interface. The interval value must be an exact integral multiple of 100. Range: 100-1000 Default: 1000 Unit: milliseconds
| ||||
| ThwDot3ahEfmPeerTable | 1.3.6.1.4.1.2011.5.25.136.1.2.2.3 | NA | ||
table · not-accessible · current This table contains information about the OAM peer for a particular Ethernet like interface. OAM entities communicate with a single OAM peer entity on Ethernet links on which OAM is enabled and operating properly. There is one entry in this table for each entry in the hwDot3ahEfmTable for which information on the peer OAM entity is available. | ||||
| RhwDot3ahEfmPeerEntry | 1.3.6.1.4.1.2011.5.25.136.1.2.2.3.1 | NA | ||
row · not-accessible · current An entry in the table, containing information on the peer OAM entity for a single Ethernet like interface. Note that there is at most one OAM peer for each Ethernet like interface. Entries are automatically created when information about the OAM peer entity becomes available, and automatically deleted when the OAM peer entity is no longer in communication. Peer information is not available when hwDot3ahEfmOperStatus is disabled(1), linkFault(2), passiveWait(3), activeSendLocal(4). or nonOperHalfDuplex(10)).
| ||||
| ChwDot3ahEfmPeerMacAddress | 1.3.6.1.4.1.2011.5.25.136.1.2.2.3.1.1 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The MAC address of the peer OAM entity. The MAC address is derived from the most recently received OAMPDU. | ||||
| ChwDot3ahEfmPeerVendorOui | 1.3.6.1.4.1.2011.5.25.136.1.2.2.3.1.2 | HWDot3Oui | RO | |
column · HWDot3Oui · read-only · current The OUI of the OAM peer as reflected in the latest Information OAMPDU received with a Local Information TLV. The OUI can be used to identify the vendor of the remote OAM entity. This value is initialized to zero before any Local Information TLV is received. | ||||
| ChwDot3ahEfmPeerVendorInfo | 1.3.6.1.4.1.2011.5.25.136.1.2.2.3.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The Vendor Info of the OAM peer as reflected in the latest Information OAMPDU received with a Local Information TLV. The vendor information field is within the Local Information TLV, and can be used to determine additional information about the peer entity. The format of the vendor information is unspecified within the 32-bit field. This value is initialized to zero before any Local Information TLV is received. | ||||
| ChwDot3ahEfmPeerMode | 1.3.6.1.4.1.2011.5.25.136.1.2.2.3.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The mode of the OAM peer as reflected in the latest Information OAMPDU received with a Local Information TLV. The mode of the peer can be determined from the Configuration field in the Local Information TLV of the last Information OAMPDU received from the peer. Options: 1. active(1) -The value of active(1)is returned when a Local Information TLV has been received indicating the peer is in active mode. 2. passive(2) -The value of passive(2)is returned when a Local Information TLV has been received indicating the peer is in passive mode. 3. unknown(3) -The value is unknown(3) whenever no Local Information TLV has been received.
| ||||
| ChwDot3ahEfmPeerMaxOamPduSize | 1.3.6.1.4.1.2011.5.25.136.1.2.2.3.1.5 | Unsigned32 (0..65535) | RO | |
column · Unsigned32 (0..65535) · read-only · current The maximum size of OAMPDU supported by the peer as reflected in the latest Information OAMPDU received with a Local Information TLV. Ethernet OAM on this interface must not use OAMPDUs that exceed this size. The maximum OAMPDU size can be determined from the PDU Configuration field of the Local Information TLV of the last Information OAMPDU received from the peer. A value of zero is returned if no Local Information TLV has been received. Otherwise, the value of the OAM peer's maximum OAMPDU size is returned in this value. Note that the values 1..65534 are invalid sizes for Ethernet frames and should never appear.
| ||||
| ChwDot3ahEfmPeerConfigRevision | 1.3.6.1.4.1.2011.5.25.136.1.2.2.3.1.6 | Unsigned32 (0..65535) | RO | |
column · Unsigned32 (0..65535) · read-only · current The configuration revision of the OAM peer as reflected in the latest OAMPDU. This attribute is changed by the peer whenever it has a local configuration change for Ethernet OAM this interface. The configuration revision can be determined from the Revision field of the Local Information TLV of the most recently received Information OAMPDU with a Local Information TLV. A value of zero is returned if no Local Information TLV has been received. | ||||
| ChwDot3ahEfmPeerFunctionsSupported | 1.3.6.1.4.1.2011.5.25.136.1.2.2.3.1.7 | Bits | RO | |
column · Bits · read-only · current The OAM functions supported on this Ethernet like interface. OAM consists of separate functionality sets above the basic discovery process. This value indicates the capabilities of the peer OAM entity with respect to these functions. This value is initialized so all bits are clear. If unidirectionalSupport(0) is set, then the peer OAM entity supports sending OAM frames on Ethernet interfaces when the receive path is known to be inoperable. If loopbackSupport(1) is set, then the peer OAM entity can send and receive OAM loopback commands. If eventSupport(2) is set, then the peer OAM entity can send and receive event OAMPDUs to signal various error conditions. If variableSupport(3) is set, then the peer OAM entity can send and receive variable requests to monitor attribute value as described in Clause 57 of [802.3ah]. The capabilities of the OAM peer can be determined from the configuration field of the Local Information TLV of the most recently received Information OAMPDU with a Local Information TLV. All zeros are returned if no Local Information TLV has yet been received.
| ||||
| ThwDot3ahEfmLoopbackTable | 1.3.6.1.4.1.2011.5.25.136.1.2.2.4 | NA | ||
table · not-accessible · current This table contains controls for the loopback state of the local link as well as indicating the status of the loopback function. There is one entry in this table for each entry in hwDot3ahEfmTable that supports loopback functionality (where hwDot3ahEfmFunctionsSupported includes the loopbackSupport bit set). Loopback can be used to place the remote OAM entity in a state where every received frame (except OAMPDUs) is echoed back over the same interface on which they were received. In this state, at the remote entity, 'normal' traffic is disabled as only the looped back frames are transmitted on the interface. Loopback is thus an intrusive operation that prohibits normal data flow and should be used accordingly. | ||||
| RhwDot3ahEfmLoopbackEntry | 1.3.6.1.4.1.2011.5.25.136.1.2.2.4.1 | NA | ||
row · not-accessible · current An entry in the table, containing information on the loopback status for a single Ethernet like interface. Entries in the table are automatically created whenever the local OAM entity supports loopback capabilities. The loopback status on the interface can be determined from the hwDot3ahEfmLoopbackStatus object.
| ||||
| ChwDot3ahEfmLoopbackStatus | 1.3.6.1.4.1.2011.5.25.136.1.2.2.4.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The loopback status of the OAM entity. When operating in normal mode with no loopback in progress, the status reads noLoopback(1). The values initiatingLooopback(2) and terminatingLoopback(4) can be read or written. The other values can only be read - they can never be written. Options: 1. noLoopback(1) -indicates that the loopback status of the OAM entity is noLoopback. 2. initiatingLoopback (2) -indicates that the loopback status of the OAM entity is initiatingLoopback. 3. remoteLoopback(3) -indicates that the loopback status of the OAM entity is remoteLoopback. 4. terminatingLoopback(4) -indicates that the loopback status of the OAM entity is terminatingLoopback. 5. localLoopback(5) -indicates that the loopback status of the OAM entity is localLoopback. 6. unknown(6) -indicates that the loopback status of the OAM entity is unknown.
| ||||
| ChwDot3ahEfmLoopbackIgnoreRx | 1.3.6.1.4.1.2011.5.25.136.1.2.2.4.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Since OAM loopback is a disruptive operation (user traffic does not pass), this attribute provides a mechanism to provide controls over whether received OAM loopback commands are processed or ignored. Options: 1. ignore(1) -When the value is ignore(1), received loopback commands are ignored. 2. process(2) -When the value is process(2), OAM loopback commands are processed. The default value is to process loopback commands.
| ||||
| ChwDot3ahEfmLoopbackTimeout | 1.3.6.1.4.1.2011.5.25.136.1.2.2.4.1.3 | Unsigned32 (0..1000) | RW | |
column · Unsigned32 (0..1000) · read-write · current This object specifies the timeout period for a remote loopback. The value ranges from 0 to 1000 in minutes. The default value is 20 minutes. 0 indicates that no timeout period is set.
| ||||
| ThwDot3ahEfmStatsTable | 1.3.6.1.4.1.2011.5.25.136.1.2.2.5 | NA | ||
table · not-accessible · current This table contains statistics for the OAM function on a particular Ethernet like interface. There is an entry in the table for every entry in the hwDot3ahEfmTable. The counters in this table are defined as 32-bit entries to match the counter size as defined in [802.3ah]. Given the OAM protocol is a slow protocol, the counters increment at a slow rate. | ||||
| RhwDot3ahEfmStatsEntry | 1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1 | NA | ||
row · not-accessible · current An entry in the table, containing statistics information on the Ethernet OAM function for a single Ethernet like interface. Entries are automatically created for every entry in the hwDot3ahEfmTable. Counters are maintained across transitions in hwDot3ahEfmOperStatus.
| ||||
| ChwDot3ahEfmInformationTx | 1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.1 | Counter32 | RO | |
column · Counter32 · read-only · current A count of the number of Information OAMPDUs transmitted on this interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime.
| ||||
| ChwDot3ahEfmInformationRx | 1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current A count of the number of Information OAMPDUs received on this interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime.
| ||||
| ChwDot3ahEfmUniqueEventNotificationTx | 1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current A count of the number of unique Event OAMPDUs transmitted on this interface. Event notifications may be sent in duplicate to increase the probability of successfully being received, given the possibility that a frame may be lost in transit. Duplicate Event Notification transmissions are counted by hwDot3ahEfmDuplicateEventNotificationTx. A unique Event Notification OAMPDU is indicated as an Event Notification OAMPDU with a Sequence Number field that is distinct from the previously transmitted Event Notification OAMPDU Sequence Number. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime.
| ||||
| ChwDot3ahEfmUniqueEventNotificationRx | 1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current A count of the number of unique Event OAMPDUs received on this interface. Event notification OAMPDUs may be sent in duplicate to increase the probability of successfully being received, given the possibility that a frame may be lost in transit. Duplicate Event Notification receptions are counted by hwDot3ahEfmDuplicateEventNotificationRx. A unique Event Notification OAMPDU is indicated as an Event Notification OAMPDU with a Sequence Number field that is distinct from the previously received Event Notification OAMPDU Sequence Number. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime.
| ||||
| ChwDot3ahEfmDuplicateEventNotificationTx | 1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current A count of the number of duplicate Event OAMPDUs transmitted on this interface. Event notification OAMPDUs may be sent in duplicate to increase the probability of successfully being received, given the possibility that a frame may be lost in transit. A duplicate Event Notification OAMPDU is indicated as an Event Notification OAMPDU with a Sequence Number field that is identical to the previously transmitted Event Notification OAMPDU Sequence Number. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime.
| ||||
| ChwDot3ahEfmDuplicateEventNotificationRx | 1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current A count of the number of duplicate Event OAMPDUs received on this interface. Event notification OAMPDUs may be sent in duplicate to increase the probability of successfully being received, given the possibility that a frame may be lost in transit. A duplicate Event Notification OAMPDU is indicated as an Event Notification OAMPDU with a Sequence Number field that is identical to the previously received Event Notification OAMPDU Sequence Number. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime.
| ||||
| ChwDot3ahEfmLoopbackControlTx | 1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current A count of the number of Loopback Control OAMPDUs transmitted on this interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime.
| ||||
| ChwDot3ahEfmLoopbackControlRx | 1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current A count of the number of Loopback Control OAMPDUs received on this interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime.
| ||||
| ChwDot3ahEfmVariableRequestTx | 1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current A count of the number of Variable Request OAMPDUs transmitted on this interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime.
| ||||
| ChwDot3ahEfmVariableRequestRx | 1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current A count of the number of Variable Request OAMPDUs received on this interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime.
| ||||
| ChwDot3ahEfmVariableResponseTx | 1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current A count of the number of Variable Response OAMPDUs transmitted on this interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime.
| ||||
| ChwDot3ahEfmVariableResponseRx | 1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current A count of the number of Variable Response OAMPDUs received on this interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime.
| ||||
| ChwDot3ahEfmOrgSpecificTx | 1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current A count of the number of Organization Specific OAMPDUs transmitted on this interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime.
| ||||
| ChwDot3ahEfmOrgSpecificRx | 1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.14 | Counter32 | RO | |
column · Counter32 · read-only · current A count of the number of Organization Specific OAMPDUs received on this interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime.
| ||||
| ChwDot3ahEfmUnsupportedCodesTx | 1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current A count of the number of OAMPDUs transmitted on this interface with an unsupported op-code. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime.
| ||||
| ChwDot3ahEfmUnsupportedCodesRx | 1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.16 | Counter32 | RO | |
column · Counter32 · read-only · current A count of the number of OAMPDUs received on this interface with an unsupported op-code. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime.
| ||||
| ChwDot3ahEfmFramesLostDueToOam | 1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.17 | Counter32 | RO | |
column · Counter32 · read-only · current A count of the number of frames that were dropped by the OAM multiplexer. Since the OAM multiplexer has multiple inputs and a single output, there may be cases where frames are dropped due to transmit resource contention. This counter is incremented whenever a frame is dropped by the OAM layer. Note that any Ethernet frame, not just OAMPDUs, may be dropped by the OAM layer. This can occur when an OAMPDU takes precedence over a 'normal' frame resulting in the 'normal' frame being dropped. When this counter is incremented, no other counters in this MIB are incremented. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime.
| ||||
| ThwDot3ahEfmEventConfigTable | 1.3.6.1.4.1.2011.5.25.136.1.2.2.6 | NA | ||
table · not-accessible · current Ethernet OAM includes the ability to generate and receive
Event Notification OAMPDUs to indicate various link problems.
This table contains the mechanisms to enable Event
Notifications and configure the thresholds to generate the
standard Ethernet OAM events. There is one entry in the table
for every entry in hwDot3ahEfmTable that supports OAM events
(where hwDot3ahEfmFunctionsSupported includes the eventSupport
bit set). The values in the table are maintained across
changes to hwDot3ahEfmOperStatus.
The standard threshold crossing events are:
- Errored Symbol Period Event. Generated when the number of
symbol errors exceeds a threshold within a given window
defined by a number of symbols (for example, 1,000 symbols
out of 1,000,000 had errors).
- Errored Frame Period Event. Generated when the number of
frame errors exceeds a threshold within a given window
defined by a number of frames (for example, 10 frames out
of 1000 had errors).
- Errored Frame Event. Generated when the number of frame
errors exceeds a threshold within a given window defined
by a period of time (for example, 10 frames in 1 second
had errors).
- Errored Frame Seconds Summary Event. Generated when the
number of errored frame seconds exceeds a threshold within
a given time period (for example, 10 errored frame seconds
within the last 100 seconds). An errored frame second is
defined as a 1 second interval which had >0 frame errors.
There are other events (dying gasp, critical events) that are
not threshold crossing events but which can be
enabled/disabled via this table. | ||||
| RhwDot3ahEfmEventConfigEntry | 1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1 | NA | ||
row · not-accessible · current Entries are automatically created and deleted from this table, and exist whenever the OAM entity supports Ethernet OAM events (as indicated by the eventSupport bit in hwDot3ahEfmFunctionsSuppported). Values in the table are maintained across changes to the value of hwDot3ahEfmOperStatus. Event configuration controls when the local management entity sends Event Notification OAMPDUs to its OAM peer, and when certain event flags are set or cleared in OAMPDUs.
| ||||
| ChwDot3ahEfmErrSymPeriodWindowHi | 1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.1 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The two objects hwDot3ahEfmErrSymPeriodWindowHi and
hwDot3ahEfmErrSymPeriodWindowLo together form an unsigned 64-bit
integer representing the number of symbols over which this
threshold event is defined. This is defined as
hwDot3ahEfmErrSymPeriodWindow = ((2^32)*hwDot3ahEfmErrSymPeriodWindowHi)
+ hwDot3ahEfmErrSymPeriodWindowLo
If hwDot3ahEfmErrSymPeriodThreshold symbol errors occur within a
window of hwDot3ahEfmErrSymPeriodWindow symbols, an Event
Notification OAMPDU should be generated with an Errored Symbol
Period Event TLV indicating the threshold has been crossed in
this window.
The default value for hwDot3ahEfmErrSymPeriodWindow is the number
of symbols in one second for the underlying physical layer.
| ||||
| ChwDot3ahEfmErrSymPeriodWindowLo | 1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.2 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The two objects hwDot3ahEfmErrSymPeriodWindowHi and
hwDot3ahEfmErrSymPeriodWindowLo together form an unsigned 64-bit
integer representing the number of symbols over which this
threshold event is defined. This is defined as
hwDot3ahEfmErrSymPeriodWindow = ((2^32)*hwDot3ahEfmErrSymPeriodWindowHi)
+ hwDot3ahEfmErrSymPeriodWindowLo
If hwDot3ahEfmErrSymPeriodThreshold symbol errors occur within a
window of hwDot3ahEfmErrSymPeriodWindow symbols, an Event
Notification OAMPDU should be generated with an Errored Symbol
Period Event TLV indicating the threshold has been crossed in
this window.
The default value for hwDot3ahEfmErrSymPeriodWindow is the number
of symbols in one second for the underlying physical layer.
| ||||
| ChwDot3ahEfmErrSymPeriodThresholdHi | 1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.3 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The two objects hwDot3ahEfmErrSymPeriodThresholdHi and
hwDot3ahEfmErrSymPeriodThresholdLo together form an unsigned
64-bit integer representing the number of symbol errors that
must occur within a given window to cause this event.
This is defined as
hwDot3ahEfmErrSymPeriodThreshold =
((2^32) * hwDot3ahEfmErrSymPeriodThresholdHi)
+ hwDot3ahEfmErrSymPeriodThresholdLo
If hwDot3ahEfmErrSymPeriodThreshold symbol errors occur within a
window of hwDot3ahEfmErrSymPeriodWindow symbols, an Event
Notification OAMPDU should be generated with an Errored Symbol
Period Event TLV indicating the threshold has been crossed in
this window.
The default value for hwDot3ahEfmErrSymPeriodThreshold is one
symbol errors. If the threshold value is zero, then an Event
Notification OAMPDU is sent periodically (at the end of every
window). This can be used as an asynchronous notification to
the peer OAM entity of the statistics related to this
threshold crossing alarm.
| ||||
| ChwDot3ahEfmErrSymPeriodThresholdLo | 1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.4 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The two objects hwDot3ahEfmErrSymPeriodThresholdHi and
hwDot3ahEfmErrSymPeriodThresholdLo together form an unsigned
64-bit integer representing the number of symbol errors that
must occur within a given window to cause this event.
This is defined as
hwDot3ahEfmErrSymPeriodThreshold =
((2^32) * hwDot3ahEfmErrSymPeriodThresholdHi)
+ hwDot3ahEfmErrSymPeriodThresholdLo
If hwDot3ahEfmErrSymPeriodThreshold symbol errors occur within a
window of hwDot3ahEfmErrSymPeriodWindow symbols, an Event
Notification OAMPDU should be generated with an Errored Symbol
Period Event TLV indicating the threshold has been crossed in
this window.
The default value for hwDot3ahEfmErrSymPeriodThreshold is one
symbol error. If the threshold value is zero, then an Event
Notification OAMPDU is sent periodically (at the end of every
window). This can be used as an asynchronous notification to
the peer OAM entity of the statistics related to this
threshold crossing alarm.
| ||||
| ChwDot3ahEfmErrSymPeriodEvNotifEnable | 1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.5 | TruthValue | RW | |
column · TruthValue · read-write · current If true, the OAM entity should send an Event Notification OAMPDU when an Errored Symbol Period Event occurs. By default, this object should have the value true for Ethernet like interfaces that support OAM. If the OAM layer does not support event notifications (as indicated via the hwDot3ahEfmFunctionsSupported attribute), this value is ignored. | ||||
| ChwDot3ahEfmErrFramePeriodWindow | 1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.6 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The number of frames over which the threshold is defined. The default value of the window is the number of minimum size Ethernet frames that can be received over the physical layer in one second. If hwDot3ahEfmErrFramePeriodThreshold frame errors occur within a window of hwDot3ahEfmErrFramePeriodWindow frames, an Event Notification OAMPDU should be generated with an Errored Frame Period Event TLV indicating the threshold has been crossed in this window.
| ||||
| ChwDot3ahEfmErrFramePeriodThreshold | 1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.7 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The number of frame errors that must occur for this event to be triggered. The default value is one frame error. If the threshold value is zero, then an Event Notification OAMPDU is sent periodically (at the end of every window). This can be used as an asynchronous notification to the peer OAM entity of the statistics related to this threshold crossing alarm. If hwDot3ahEfmErrFramePeriodThreshold frame errors occur within a window of hwDot3ahEfmErrFramePeriodWindow frames, an Event Notification OAMPDU should be generated with an Errored Frame Period Event TLV indicating the threshold has been crossed in this window.
| ||||
| ChwDot3ahEfmErrFramePeriodEvNotifEnable | 1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.8 | TruthValue | RW | |
column · TruthValue · read-write · current If true, the OAM entity should send an Event Notification OAMPDU when an Errored Frame Period Event occurs. By default, this object should have the value true for Ethernet like interfaces that support OAM. If the OAM layer does not support event notifications (as indicated via the hwDot3ahEfmFunctionsSupported attribute), this value is ignored. | ||||
| ChwDot3ahEfmErrFrameWindow | 1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.9 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The amount of time (in 100ms increments) over which the threshold is defined. The default value is 10 (1 second). If hwDot3ahEfmErrFrameThreshold frame errors occur within a window of hwDot3ahEfmErrFrameWindow seconds (measured in tenths of seconds), an Event Notification OAMPDU should be generated with an Errored Frame Event TLV indicating the threshold has been crossed in this window.
| ||||
| ChwDot3ahEfmErrFrameThreshold | 1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.10 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The number of frame errors that must occur for this event to be triggered. The default value is one frame error. If the threshold value is zero, then an Event Notification OAMPDU is sent periodically (at the end of every window). This can be used as an asynchronous notification to the peer OAM entity of the statistics related to this threshold crossing alarm. If hwDot3ahEfmErrFrameThreshold frame errors occur within a window of hwDot3ahEfmErrFrameWindow (in tenths of seconds), an Event Notification OAMPDU should be generated with an Errored Frame Event TLV indicating the threshold has been crossed in this window.
| ||||
| ChwDot3ahEfmErrFrameEvNotifEnable | 1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.11 | TruthValue | RW | |
column · TruthValue · read-write · current If true, the OAM entity should send an Event Notification OAMPDU when an Errored Frame Event occurs. By default, this object should have the value true for Ethernet like interfaces that support OAM. If the OAM layer does not support event notifications (as indicated via the hwDot3ahEfmFunctionsSupported attribute), this value is ignored. | ||||
| ChwDot3ahEfmErrFrameSecsSummaryWindow | 1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.12 | Integer32 (100..9000) | RW | |
column · Integer32 (100..9000) · read-write · current The amount of time (in 100ms intervals) over which the threshold is defined. The default value is 600 (60 seconds). If hwDot3ahEfmErrFrameSecsSummaryThreshold frame errors occur within a window of hwDot3ahEfmErrFrameSecsSummaryWindow (in tenths of seconds), an Event Notification OAMPDU should be generated with an Errored Frame Seconds Summary Event TLV indicating the threshold has been crossed in this window.
| ||||
| ChwDot3ahEfmErrFrameSecsSummaryThreshold | 1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.13 | Integer32 (0..900) | RW | |
column · Integer32 (0..900) · read-write · current The number of errored frame seconds that must occur for this event to be triggered. The default value is one errored frame second. If the threshold value is zero, then an Event Notification OAMPDU is sent periodically (at the end of every window). This can be used as an asynchronous notification to the peer OAM entity of the statistics related to this threshold crossing alarm. If hwDot3ahEfmErrFrameSecsSummaryThreshold frame errors occur within a window of hwDot3ahEfmErrFrameSecsSummaryWindow (in tenths of seconds), an Event Notification OAMPDU should be generated with an Errored Frame Seconds Summary Event TLV indicating the threshold has been crossed in this window.
| ||||
| ChwDot3ahEfmErrFrameSecsEvNotifEnable | 1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.14 | TruthValue | RW | |
column · TruthValue · read-write · current If true, the local OAM entity should send an Event Notification OAMPDU when an Errored Frame Seconds Event occurs. By default, this object should have the value true for Ethernet like interfaces that support OAM. If the OAM layer does not support event notifications (as indicated via the hwDot3ahEfmFunctionsSupported attribute), this value is ignored. | ||||
| ChwDot3ahEfmDyingGaspEnable | 1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.15 | TruthValue | RW | |
column · TruthValue · read-write · current If true, the local OAM entity should attempt to indicate a dying gasp via the OAMPDU flags field to its peer OAM entity when a dying gasp event occurs. The exact definition of a dying gasp event is implementation dependent. If the system does not support dying gasp capability, setting this object has no effect, and reading the object should always result in 'false'. By default, this object should have the value true for Ethernet like interfaces that support OAM. If the OAM layer does not support event notifications (as indicated via the hwDot3ahEfmFunctionsSupported attribute), this value is ignored. | ||||
| ChwDot3ahEfmCriticalEventEnable | 1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.16 | TruthValue | RW | |
column · TruthValue · read-write · current If true, the local OAM entity should attempt to indicate a critical event via the OAMPDU flags to its peer OAM entity when a critical event occurs. The exact definition of a critical event is implementation dependent. If the system does not support critical event capability, setting this object has no effect, and reading the object should always result in 'false'. By default, this object should have the value true for Ethernet like interfaces that support OAM. If the OAM layer does not support event notifications (as indicated via the hwDot3ahEfmFunctionsSupported attribute), this value is ignored. | ||||
| ChwDot3ahEfmThresholdTriggerErrDown | 1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.17 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current This object indicates whether threshold event will trigger error-shutdown. If it is enabled(1), after EFM checks that the threshold event happens, the current interface will be set to administrative down. The default value is disabled(2). | ||||
| ChwDot3ahEfmNonThresholdCriticalEventTriggerErrDown | 1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.18 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current This object indicates whether non-threshold critical event will trigger error-shutdown. If it is enabled(1), after EFM checks that the non-threshold critical event happens, the current interface will be set to administrative down. The default value is disabled(2). | ||||
| ChwDot3ahEfmNonThresholdDyinggaspTriggerErrDown | 1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.19 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current This object indicates whether non-threshold dying gasp event will trigger error-shutdown. If it is enabled(1), after EFM checks that the non-threshold dying gasp event happens, the current interface will be set to administrative down. The default value is disabled(2). | ||||
| ChwDot3ahEfmNonThresholdLinkFaultTriggerErrDown | 1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.20 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current This object indicates whether non-threshold link fault event will trigger error-shutdown. If it is enabled(1), after EFM checks that the non-threshold link fault event happens, the current interface will be set to administrative down. The default value is disabled(2). | ||||
| ChwDot3ahEfmNonThresholdTimeoutTriggerErrDown | 1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.21 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current This object indicates whether non-threshold time out event will trigger error-shutdown. If it is enabled(1), after EFM checks that the non-threshold time out event happens, the current interface will be set to administrative down. The default value is disabled(2). | ||||
| ThwDot3ahEfmEventLogTable | 1.3.6.1.4.1.2011.5.25.136.1.2.2.7 | NA | ||
table · not-accessible · current This table records a history of the events that have occurred at the Ethernet OAM level. These events can include locally detected events, which may result in locally generated OAMPDUs, and remotely detected events, which are detected by the OAM peer entity and signaled to the local entity via Ethernet OAM. Ethernet OAM events can be signaled by Event Notification OAMPDUs or by the flags field in any OAMPDU. This table contains both threshold crossing events and non-threshold crossing events. The parameters for the threshold window, threshold value, and actual value (hwDot3ahEfmEventLogWindowXX, hwDot3ahEfmEventLogThresholdXX, hwDot3ahEfmEventLogValue) are only applicable to threshold crossing events, and are returned as all F's (2^32 - 1) for non-threshold crossing events. Entries in the table are automatically created when such events are detected. The size of the table is implementation dependent. When the table reaches its maximum size, older entries are automatically deleted to make room for newer entries. | ||||
| RhwDot3ahEfmEventLogEntry | 1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1 | NA | ||
row · not-accessible · current An entry in the hwDot3ahEfmEventLogTable. Entries are automatically created whenever Ethernet OAM events occur at the local OAM entity, and when Event Notification OAMPDUs are received at the local OAM entity (indicating events have occurred at the peer OAM entity). The size of the table is implementation dependent, but when the table becomes full, older events are automatically deleted to make room for newer events. The table index hwDot3ahEfmEventLogIndex increments for each new entry, and when the maximum value is reached the value restarts at zero. | ||||
| ChwDot3ahEfmEventLogIndex | 1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current An arbitrary integer for identifying individual events within the event log. | ||||
| ChwDot3ahEfmEventLogTimestamp | 1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.2 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of sysUpTime at the time of the logged event. For locally generated events, the time of the event can be accurately retrieved from sysUpTime. For remotely generated events, the time of the event is indicated by the reception of the Event Notification OAMPDU indicating the event occurred on the peer. A system may attempt to adjust the timestamp value to more accurately reflect the time of the event at the peer OAM entity by using other information, such as that found in the timestamp found of the Event Notification TLVs, which provides an indication of the relative time between events at the peer entity. | ||||
| ChwDot3ahEfmEventLogOui | 1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.3 | HWDot3Oui | RO | |
column · HWDot3Oui · read-only · current The OUI of the entity defining the object type. All IEEE 802.3 defined events (as appearing in [802.3ah] except for the Organizationally Unique Event TLVs) use the IEEE 802.3 OUI of 0x0180C2. Organizations defining their own Event Notification TLVs include their OUI in the Event Notification TLV which gets reflected here. | ||||
| ChwDot3ahEfmEventLogType | 1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The type of event that generated this entry in the event log.
When the OUI is the IEEE 802.3 OUI of 0x0180C2, the following
event types are defined:
erroredSymbolEvent(1),
erroredFrameEvent(2),
erroredFramePeriodEvent(3),
erroredFrameSecondsEvent(4),
lostlink(254),
linkFault(256),
dyingGaspEvent(257),
criticalLinkEvent(258)
The first four are considered threshold crossing events as
they are generated when a metric exceeds a given value within
a specified window. The other three are not threshold
crossing events.
When the OUI is not 71874 (0x0180C2 in hex), then some other
organization has defined the event space. If event subtyping
is known to the implementation, it may be reflected here.
Otherwise, this value should return all Fs (2^32 - 1). | ||||
| ChwDot3ahEfmEventLogLocation | 1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Whether this event occurred locally (local(1)), or was received from the OAM peer via Ethernet OAM (remote(2)). Options: 1. local(1) -indicates that an EfmEvent occurred locally. 2. remote(2) -indicates that an EfmEvent was received from the OAM peer through Ethernet OAM.
| ||||
| ChwDot3ahEfmEventLogWindowHi | 1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current If the event represents a threshold crossing event, the two
objects hwDot3ahEfmEventWindowHi and hwDot3ahEfmEventWindowLo form an
unsigned 64-bit integer yielding the window over which the
value was measured for the threshold crossing event (for
example, 5, when 11 occurrences happened in 5 seconds while
the threshold was 10). The two objects are combined as:
hwDot3ahEfmEventLogWindow = ((2^32) * hwDot3ahEfmEventLogWindowHi)
+ hwDot3ahEfmEventLogWindowLo
Otherwise, this value is returned as all F's (2^32 - 1) and
adds no useful information. | ||||
| ChwDot3ahEfmEventLogWindowLo | 1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current If the event represents a threshold crossing event, the two
objects hwDot3ahEfmEventWindowHi and hwDot3ahEfmEventWindowLo form an
unsigned 64-bit integer yielding the window over which the
value was measured for the threshold crossing event (for
example, 5, when 11 occurrences happened in 5 seconds while
the threshold was 10). The two objects are combined as:
hwDot3ahEfmEventLogWindow = ((2^32) * hwDot3ahEfmEventLogWindowHi)
+ hwDot3ahEfmEventLogWindowLo
Otherwise, this value is returned as all F's (2^32 - 1) and
adds no useful information. | ||||
| ChwDot3ahEfmEventLogThresholdHi | 1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.8 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current If the event represents a threshold crossing event, the two
objects hwDot3ahEfmEventThresholdHi and hwDot3ahEfmEventThresholdLo
form an unsigned 64-bit integer yielding the value that was
crossed for the threshold crossing event (for example, 10,
when 11 occurrences happened in 5 seconds while the threshold
was 10). The two objects are combined as:
hwDot3ahEfmEventLogThreshold = ((2^32) * hwDot3ahEfmEventLogThresholdHi)
+ hwDot3ahEfmEventLogThresholdLo
Otherwise, this value is returned as all F's (2^32 -1) and
adds no useful information. | ||||
| ChwDot3ahEfmEventLogThresholdLo | 1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current If the event represents a threshold crossing event, the two
objects hwDot3ahEfmEventThresholdHi and hwDot3ahEfmEventThresholdLo
form an unsigned 64-bit integer yielding the value that was
crossed for the threshold crossing event (for example, 10,
when 11 occurrences happened in 5 seconds while the threshold
was 10). The two objects are combined as:
hwDot3ahEfmEventLogThreshold = ((2^32) * hwDot3ahEfmEventLogThresholdHi)
+ hwDot3ahEfmEventLogThresholdLo
Otherwise, this value is returned as all F's (2^32 - 1) and
adds no useful information. | ||||
| ChwDot3ahEfmEventLogValue | 1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.10 | CounterBasedGauge64 | RO | |
column · CounterBasedGauge64 · read-only · current If the event represents a threshold crossing event, this value indicates the value of the parameter within the given window that generated this event (for example, 11, when 11 occurrences happened in 5 seconds while the threshold was 10). Otherwise, this value is returned as all F's (2^64 - 1) and adds no useful information. | ||||
| ChwDot3ahEfmEventLogRunningTotal | 1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.11 | CounterBasedGauge64 | RO | |
column · CounterBasedGauge64 · read-only · current Each Event Notification TLV contains a running total of the number of times an event has occurred, as well as the number of times an Event Notification for the event has been transmitted. For non-threshold crossing events, the number of events (hwDot3ahEfmLogRunningTotal) and the number of resultant Event Notifications (hwDot3ahEfmLogEventTotal) should be identical. For threshold crossing events, since multiple occurrences may be required to cross the threshold, these values are likely different. This value represents the total number of times this event has happened since the last reset (for example, 3253, when 3253 symbol errors have occurred since the last reset, which has resulted in 51 symbol error threshold crossing events since the last reset). | ||||
| ChwDot3ahEfmEventLogEventTotal | 1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.12 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Each Event Notification TLV contains a running total of the number of times an event has occurred, as well as the number of times an Event Notification for the event has been transmitted. For non-threshold crossing events, the number of events (hwDot3ahEfmLogRunningTotal) and the number of resultant Event Notifications (hwDot3ahEfmLogEventTotal) should be identical. For threshold crossing events, since multiple occurrences may be required to cross the threshold, these values are likely different. This value represents the total number of times one or more of these occurrences have resulted in an Event Notification (for example, 51 when 3253 symbol errors have occurred since the last reset, which has resulted in 51 symbol error threshold crossing events since the last reset). | ||||
| ThwDot3ahEfmManagerTable | 1.3.6.1.4.1.2011.5.25.136.1.2.2.8 | NA | ||
table · not-accessible · current This table contains configurations of binding relationships between EFM and other modules. | ||||
| RhwDot3ahEfmManagerEntry | 1.3.6.1.4.1.2011.5.25.136.1.2.2.8.1 | NA | ||
row · not-accessible · current This entry contains configurations of binding relationships between EFM and other modules.
| ||||
| ChwDot3ahEfmTriggerIfDown | 1.3.6.1.4.1.2011.5.25.136.1.2.2.8.1.1 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current This object indicates whether EFM is bound to the interface. If it is enabled(1), after EFM checks that the link times out, the current Ethernet interface link state will be set to block (EFM down),and all the data except the OAMPDU is blocked. The default value is disabled(2). | ||||
| ChwDot3ahEfmHoldUpTime | 1.3.6.1.4.1.2011.5.25.136.1.2.2.8.1.2 | Integer32 (0..50) | RW | |
column · Integer32 (0..50) · read-write · current This object specifies the time elapsed an EFM interface is in the faulty state. The value ranges from 0 to 50 in seconds. The default value is 0. | ||||
| ThwDot3ahEvrrpTable | 1.3.6.1.4.1.2011.5.25.136.1.2.2.9 | NA | ||
table · not-accessible · current This table contains information about the OAM Evrrp project for a particular Ethernet like interface. | ||||
| RhwDot3ahEvrrpEntry | 1.3.6.1.4.1.2011.5.25.136.1.2.2.9.1 | NA | ||
row · not-accessible · current An entry in the table of hwDot3ahEvrrpTable, containing information on the OAM Evrrp entity for a single Ethernet like interface. Note that there is at most one OAM Evrrp for each Ethernet like interface.
| ||||
| ChwDot3ahEvrrpCpuState | 1.3.6.1.4.1.2011.5.25.136.1.2.2.9.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the state in the OAMPDU which sended by the peer interface. Options: 1. master(1) -If it is master(1), EFM will make the link work as the master state. 2. slave(2) -if it is slave(2), EFM will make the link works as the slave chain link. 3. unknown(3) -That means the peer interface didn't send any OAMPDU which contains the state of link status. The default state is unknown(3).
| ||||
| ChwDot3ahEvrrpTriggerIfDown | 1.3.6.1.4.1.2011.5.25.136.1.2.2.9.1.2 | EnabledStatus | RW | obsolete |
column · EnabledStatus · read-write · obsolete This object indicates whether EFM is bound to the interface. If it is enabled(1), after EFM checks that the link times out, the current Ethernet interface link state will be set to EFM down. And all of the PDU operation will be stop. The default value is disabled(2). | ||||
| ChwDot3ahEvrrpHoldUpTime | 1.3.6.1.4.1.2011.5.25.136.1.2.2.9.1.3 | Integer32 (0..50) | RW | obsolete |
column · Integer32 (0..50) · read-write · obsolete This object specifies the time elapsed an EFM interface is in the faulty state. The value ranges from 0 to 50 in seconds. The default value is 0. | ||||
| NhwOamManager | 1.3.6.1.4.1.2011.5.25.136.1.3 | |||
| NhwTestMessage | 1.3.6.1.4.1.2011.5.25.136.1.4 | |||
| NhwTestMessageObject | 1.3.6.1.4.1.2011.5.25.136.1.4.1 | |||
| ShwTestMessageTableNextIndex | 1.3.6.1.4.1.2011.5.25.136.1.4.1.1 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current Search the next hwTestMessageTable instance. | ||||
| ThwTestMessageTable | 1.3.6.1.4.1.2011.5.25.136.1.4.1.2 | NA | ||
table · not-accessible · current The definition of the tested packets format and the transmission of the tested packets | ||||
| RhwTestMessageEntry | 1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1 | NA | ||
| ChwTestMessageIndex | 1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current Set the index for the tested packets table | ||||
| ChwTestMessageMacAddress | 1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.11 | MacAddress | RC | |
column · MacAddress · read-create · current The destination MAC address | ||||
| ChwTestMessageVlanID | 1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.12 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current VLAN index | ||||
| ChwTestMessageInterface | 1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.13 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current If the interface is specified, specify the interface name. | ||||
| ChwTestMessageServiceInstance | 1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.14 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current Name of the service instance | ||||
| ChwTestMessagePacketSize | 1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.15 | Unsigned32 (64..1518) | RC | |
column · Unsigned32 (64..1518) · read-create · current The length of the sent tested packets ranges from 64 to 1518 in byte, and the default value is 64. | ||||
| ChwTestMessageSendPackets | 1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.16 | Unsigned32 (1..65535) | RC | |
column · Unsigned32 (1..65535) · read-create · current The number of the sent tested packets ranges from 1 to 65535 in integer, and the default value is 5. | ||||
| ChwTestMessageSendSpeed | 1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.17 | HWTestMessageSendSpeed | RC | |
column · HWTestMessageSendSpeed · read-create · current Enumerated type indicates the rate of sending the packets: oneMbps and fiveMbps. The default is oneMbps. | ||||
| ChwTestMessageSendEnabled | 1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.18 | TruthValue | RC | |
column · TruthValue · read-create · current The sending and termination of the tested packets | ||||
| ChwTestMessageSendFinished | 1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.19 | HWTestMessageFinishedValue | RO | |
column · HWTestMessageFinishedValue · read-only · current View whether the tested packets are stopped to be sent: 1, 2, 3, 4, and 5 indicate that has not run/is running/the previous test terminates normally/the previous test terminates abnormally/the previous test is interrupted (through ctrl+c or mib) | ||||
| ChwTestMessageRowStatus | 1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.51 | RowStatus | RC | |
column · RowStatus · read-create · current The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated. | ||||
| ThwTestMessageResultTable | 1.3.6.1.4.1.2011.5.25.136.1.4.1.3 | NA | ||
table · not-accessible · current View the returned results after tests | ||||
| RhwTestMessageResultEntry | 1.3.6.1.4.1.2011.5.25.136.1.4.1.3.1 | NA | ||
| ChwTestMessageResultSendPackets | 1.3.6.1.4.1.2011.5.25.136.1.4.1.3.1.11 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of the sent packets | ||||
| ChwTestMessageResultReceivedPackets | 1.3.6.1.4.1.2011.5.25.136.1.4.1.3.1.12 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of the received packets | ||||
| ChwTestMessageResultPacketsLost | 1.3.6.1.4.1.2011.5.25.136.1.4.1.3.1.13 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Packets loss ratio | ||||
| ChwTestMessageResultSendBytes | 1.3.6.1.4.1.2011.5.25.136.1.4.1.3.1.14 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of the sent bytes | ||||
| ChwTestMessageResultReceivedBytes | 1.3.6.1.4.1.2011.5.25.136.1.4.1.3.1.15 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of the received bytes | ||||
| ChwTestMessageResultBytesLost | 1.3.6.1.4.1.2011.5.25.136.1.4.1.3.1.16 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of the lost bytes | ||||
| ChwTestMessageBeginTimeStamp | 1.3.6.1.4.1.2011.5.25.136.1.4.1.3.1.17 | TimeStamp | RO | |
column · TimeStamp · read-only · current The time of starting the Test operation | ||||
| ChwTestMessageEndTimeStamp | 1.3.6.1.4.1.2011.5.25.136.1.4.1.3.1.18 | TimeStamp | RO | |
column · TimeStamp · read-only · current The time of ending the Test operation | ||||
| NhwEthOamTraps | 1.3.6.1.4.1.2011.5.25.136.1.6 | |||
| !hwDot1agCfmFaultAlarm | 1.3.6.1.4.1.2011.5.25.136.1.6.1 | |||
notification · current A MEP has lost contact with one or more MEPs. A notification
(fault alarm) is sent to the management entity with the OID
of the MEP that has detected the fault.
Whenever a MEP loses contact with one or more other MEPs,
it may or may not generate a Fault Alarm to warn the system
administrator of the problem, as controlled by the MEP
Fault Notification Generator State Machine and associated
Managed Objects. Only the highest-priority defect, as shown
in Table 20-1, is reported in the Fault Alarm.
hwDot1agCfmRMepMacAddress The MAC address of the remote faulty MEP
hwDot1agCfmRMepHighestPrDefect The fault in the highest level
hwDot1agCfmMdName The name of the faulty MD
hwDot1agCfmMdLevel The level of the faulty MD
hwDot1agCfmMaName The name of the faulty MA | ||||
| !hwTestMessageFailed | 1.3.6.1.4.1.2011.5.25.136.1.6.2 | obsolete | ||
notification · obsolete The events after tests are reported. 1,2,3,4, and 5 indicate has not run/is running/the previous test terminates normally/the previous test terminate abnormally/the previous test is interrupted. (through ctrl+c or mib)
| ||||
| !hwTestMessageCompleted | 1.3.6.1.4.1.2011.5.25.136.1.6.3 | obsolete | ||
notification · obsolete After the test is complete, report the results to the network management. | ||||
| !hwDot3ahEfmThresholdEvent | 1.3.6.1.4.1.2011.5.25.136.1.6.4 | |||
notification · current This object indicates that an hwDot3ahEfmThresholdEvent notification is sent when a local or remote threshold-crossing event is detected. A local threshold-crossing event is detected by the local entity, whereas a remote threshold-crossing event is detected through the reception of an Ethernet OAM Event Notification OAMPDU indicating a threshold event. This notification should not be sent more than once per second. The OAM entity can be obtained from the ifIndex in the variable bindings. The objects in the notification correspond to the values in a row instance of in the hwDot3ahEfmEventLogTable. The management entity should periodically check hwDot3ahEfmEventLogTable to detect any missed events.
| ||||
| !hwDot3ahEfmNonThresholdEvent | 1.3.6.1.4.1.2011.5.25.136.1.6.5 | |||
notification · current This object indicates that an hwDot3ahEfmNonThresholdEvent notification is sent when a local or remote non-threshold-crossing event is detected. A local event is detected by the local entity, whereas a remote event is detected through the reception of an Ethernet OAM Event Notification OAMPDU indicating a non-threshold-crossing event. This notification should not be sent more than once per second. The OAM entity can be obtained from the ifIndex in the variable bindings. The objects in the notification correspond to the values in a row instance of the hwDot3ahEfmEventLogTable. The management entity should periodically check hwDot3ahEfmEventLogTable to detect any missed events. | ||||
| !hwDot3ahEfmRemoteDyingGaspEvent | 1.3.6.1.4.1.2011.5.25.136.1.6.8 | |||
notification · current This object indicates that an hwDot3ahEfmRemoteDyingGaspEvent notification is sent when a remote Dying-Gasp event is detected. A remote event is detected through the reception of an Ethernet OAM Event Notification OAMPDU indicating a Dying-Gasp event.
| ||||
| !hwDot3ahEfmNonThresholdRecovery | 1.3.6.1.4.1.2011.5.25.136.1.6.17 | |||
notification · current This object indicates that the non-threshold-crossing event is cleared. | ||||
| !hwCfmVlanOnewayDelay | 1.3.6.1.4.1.2011.5.25.136.1.6.23 | |||
notification · current This object indicates that the one-way delay exceeds the trap threshold in the VLAN networking. | ||||
| !hwCfmVlanOnewayDelayRecovery | 1.3.6.1.4.1.2011.5.25.136.1.6.24 | |||
notification · current This object indicates that the one-way delay falls below the trap threshold in the VLAN networking. | ||||
| !hwCfmVlanTwowayDelay | 1.3.6.1.4.1.2011.5.25.136.1.6.25 | |||
notification · current This object indicates that the two-way delay exceeds the trap threshold in the VLAN networking. | ||||
| !hwCfmVlanTwowayDelayRecovery | 1.3.6.1.4.1.2011.5.25.136.1.6.26 | |||
notification · current This object indicates that the two-way delay falls below the trap threshold in the VLAN networking. | ||||
| !hwDot3ahEfmLoopbackFailed | 1.3.6.1.4.1.2011.5.25.136.1.6.29 | |||
notification · current This object indicates that an hwDot3ahEfmLoopbackFailed notification is sent when loopback fails to start on an interface. This notification should not be sent more than once per second.
| ||||
| !hwY1731AisDefectAlarm | 1.3.6.1.4.1.2011.5.25.136.1.6.30 | |||
notification · current This object indicates that the MEP receives an AIS PDU and enters the faulty state. | ||||
| !hwY1731AisDefectAlarmRecovery | 1.3.6.1.4.1.2011.5.25.136.1.6.31 | |||
notification · current This object indicates that the MEP does not receive an AIS PDU within the AIS PDU timeout period and exits the faulty state. | ||||
| !hwDot1agCfmUnexpectedMEGLevel | 1.3.6.1.4.1.2011.5.25.136.1.6.32 | |||
notification · current This object indicates that the MEP receives a CCM with an unexpected MEG level. | ||||
| !hwDot1agCfmUnexpectedMEGLevelCleared | 1.3.6.1.4.1.2011.5.25.136.1.6.33 | |||
notification · current This object indicates that the MEP does not receive a CCM with an unexpected MEG level within the CCM timeout period. | ||||
| !hwDot1agCfmMismerge | 1.3.6.1.4.1.2011.5.25.136.1.6.34 | |||
notification · current This object indicates that the MEP receives a CCM carrying the correct MEG level but the incorrect MEG ID. | ||||
| !hwDot1agCfmMismergeCleared | 1.3.6.1.4.1.2011.5.25.136.1.6.35 | |||
notification · current This object indicates that the MEP does not receive a CCM with an unexpected MEG ID within the CCM timeout period. | ||||
| !hwDot1agCfmUnexpectedMEP | 1.3.6.1.4.1.2011.5.25.136.1.6.36 | |||
notification · current This object indicates that the MEP receives a CCM that has the correct MEG level, correct MEG ID, and unexpected MEP ID. | ||||
| !hwDot1agCfmUnexpectedMEPCleared | 1.3.6.1.4.1.2011.5.25.136.1.6.37 | |||
notification · current This object indicates that the MEP does not receive a CCM with an unexpected MEP ID within the CCM timeout period. | ||||
| !hwDot1agCfmUnexpectedPeriod | 1.3.6.1.4.1.2011.5.25.136.1.6.38 | |||
notification · current This object indicates that the MEP receives a CCM that has the correct MEG level, correct MEG ID, correct MEP ID, and unexpected period. | ||||
| !hwDot1agCfmUnexpectedPeriodCleared | 1.3.6.1.4.1.2011.5.25.136.1.6.39 | |||
notification · current This object indicates that the MEP does not receive a CCM with an unexpected period within the CCM timeout period. | ||||
| !hwDot1agCfmUnexpectedMAC | 1.3.6.1.4.1.2011.5.25.136.1.6.40 | |||
notification · current This object indicates that the MEP receives a CCM with an unexpected MAC address. | ||||
| !hwDot1agCfmUnexpectedMACCleared | 1.3.6.1.4.1.2011.5.25.136.1.6.41 | |||
notification · current This object indicates that the MEP does not receive a CCM with an unexpected MAC address within the CCM timeout period. | ||||
| !hwDot1agCfmLOC | 1.3.6.1.4.1.2011.5.25.136.1.6.42 | |||
notification · current This object indicates that the MEP does not receive any CCM from the RMEP within the CCM timeout period. | ||||
| !hwDot1agCfmLOCCleared | 1.3.6.1.4.1.2011.5.25.136.1.6.43 | |||
notification · current This object indicates that the MEP receives n (n is greater than or equal to 3) CCMs from the RMEP (MEP ID = i) within the CCM timeout period. | ||||
| !hwDot1agCfmExceptionalMACStatus | 1.3.6.1.4.1.2011.5.25.136.1.6.44 | |||
notification · current This object indicates that the remote MEP is reporting an error status in its Port Status TLV or Interface Status TLV. | ||||
| !hwDot1agCfmExceptionalMACStatusCleared | 1.3.6.1.4.1.2011.5.25.136.1.6.45 | |||
notification · current This object indicates that the remote MEP resumes from an error status indicated in its Port Status TLV or Interface Status TLV. | ||||
| !hwDot1agCfmRDI | 1.3.6.1.4.1.2011.5.25.136.1.6.46 | |||
notification · current This object indicates that the MEP receives a CCM with the RDI field set. | ||||
| !hwDot1agCfmRDICleared | 1.3.6.1.4.1.2011.5.25.136.1.6.47 | |||
notification · current This object indicates that the MEP receives a CCM with the RDI field cleared. | ||||
| !hwY1731AisExceedMaxPktNum | 1.3.6.1.4.1.2011.5.25.136.1.6.48 | |||
notification · current This object indicates that the number of packets sent or received in 1s exceeds the maximum value.
| ||||
| !hwY1731AisExceedMaxPktNumCleared | 1.3.6.1.4.1.2011.5.25.136.1.6.49 | |||
notification · current This object indicates that the number of packets sent or received in 1s falls below the maximum value. | ||||
| !hwY1731LckDefect | 1.3.6.1.4.1.2011.5.25.136.1.6.50 | |||
notification · current This object indicates that the MEP enters the LCK faulty state. | ||||
| !hwY1731LckDefectCleared | 1.3.6.1.4.1.2011.5.25.136.1.6.51 | |||
notification · current This object indicates that the MEP exits from the LCK faulty state. | ||||
| !hwY1731Statistic | 1.3.6.1.4.1.2011.5.25.136.1.6.52 | |||
notification · current This object indicates that the Y.1731 statistic value exceeds the upper threshold. | ||||
| !hwY1731StatisticClear | 1.3.6.1.4.1.2011.5.25.136.1.6.53 | |||
notification · current This object indicates that the Y.1731 statistic value falls below the lower threshold. | ||||
| !hwY1731LckExceedThreshold | 1.3.6.1.4.1.2011.5.25.136.1.6.54 | |||
notification · current Indicates that the number of LCK packets transmitted in 1 second exceeds the upper limit. | ||||
| !hwY1731LckExceedThresholdRecovery | 1.3.6.1.4.1.2011.5.25.136.1.6.55 | |||
notification · current Indicates that the number of LCK packets transmitted in 1 second falls below the lower limit. | ||||
| !hwY1731TunnelNonSupport | 1.3.6.1.4.1.2011.5.25.136.1.6.56 | |||
notification · current This object indicates that Y.1731 does not support the current public tunnel. | ||||
| !hwY1731TunnelNonSupportResumed | 1.3.6.1.4.1.2011.5.25.136.1.6.57 | |||
notification · current This object indicates that the alarm that Y.1731 does not support the current public tunnel is cleared. | ||||
| !hwY1731TestIdStatistic | 1.3.6.1.4.1.2011.5.25.136.1.6.58 | |||
notification · current The Y.1731 statistic value exceeded the upper limit value of the threshold. | ||||
| !hwY1731TestIdStatisticClear | 1.3.6.1.4.1.2011.5.25.136.1.6.59 | |||
notification · current The Y.1731 statistic value fell below lower limit value of the threshold. | ||||
| !hwY1731PwTrunkNonSupport | 1.3.6.1.4.1.2011.5.25.136.1.6.60 | |||
notification · current This object indicates that Y.1731 PW-side frame loss measurement is not supported on an Eth-Trunk interface configured as the PW's public network-side interface. | ||||
| !hwY1731PwTrunkNonSupportResumed | 1.3.6.1.4.1.2011.5.25.136.1.6.61 | |||
notification · current This object indicates that The alarm that Y.1731 PW-side frame loss measurement is not supported on an Eth-Trunk interface configured as the PW's public network-side interface is cleared. | ||||
| NhwEthOamConformance | 1.3.6.1.4.1.2011.5.25.136.1.7 | |||
| NhwEthOamCompliances | 1.3.6.1.4.1.2011.5.25.136.1.7.1 | |||
| MhwEthOamCompliance | 1.3.6.1.4.1.2011.5.25.136.1.7.1.1 | |||
compliance · current The compliance statement for the HUAWEI-ETHOAM-MIB
| ||||
| NhwEthOamGroups | 1.3.6.1.4.1.2011.5.25.136.1.7.2 | |||
| GhwDot1agCfmMdGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.1 | |||
group · current Objects for the hwDot1agCfmMd group. | ||||
| GhwDot1agCfmMaGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.2 | |||
group · current Objects for the hwDot1agCfmMa group.
| ||||
| GhwDot1agCfmMepGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.3 | |||
group · current Objects for the hwDot1agCfmMep group. | ||||
| GhwDot1agCfmRMepGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.4 | |||
group · current RMEP configuration group | ||||
| GhwDot1agCfmMipGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.5 | |||
| GhwDot1agCfmMacPingGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.6 | |||
group · current Gmac Ping starting and statistics group
| ||||
| GhwDot1agCfmMacTraceGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.7 | |||
group · current Mac Trace starting and statistics group
| ||||
| GhwDot1agCfmMacTraceReplyGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.8 | |||
group · current Gmac Trace starting and statistics group
| ||||
| GhwDot1agCfmQueryMdIndexGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.9 | |||
| GhwDot1agCfmQueryMaIndexGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.10 | |||
| GhwDot3ahEfmDetectModeGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.11 | |||
group · current Test mode group | ||||
| GhwTestMessageGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.12 | |||
group · current Test packets setting group | ||||
| GhwTestMessageResultGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.13 | |||
group · current The group for the tested packets results to be returned. | ||||
| GhwEthOamTrapsGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.14 | |||
group · current Objects for the Notifications group. A collection of notifications used by Ethernet OAM to signal to a management entity that local or remote events have occurred on a specified Ethernet link. This group is optional for all IEEE 802.3 OAM implementations. Since the information in the notifications is dependent on the hwDot3ahEfmEventLogTable, that table must be implemented for notifications.
| ||||
| GhwDot1agCfmGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.15 | |||
| GhwDot3ahEfmControlGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.16 | |||
group · current A collection of objects providing the abilities, configuration, and status of an Ethernet OAM entity. | ||||
| GhwDot3ahEfmPeerGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.17 | |||
group · current A collection of objects providing the abilities, configuration, and status of a peer Ethernet OAM entity. | ||||
| GhwDot3ahEfmStatsBaseGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.18 | |||
group · current A collection of objects providing the statistics for the number of various transmit and receive events for OAM on an Ethernet like interface. Note that all of these counters must be supported even if the related function (as described in hwDot3ahEfmFunctionsSupported) is not supported.
| ||||
| GhwDot3ahEfmLoopbackGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.19 | |||
group · current A collection of objects for controlling the OAM remote loopback function. | ||||
| GhwDot3ahEfmErrSymbolPeriodEventGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.20 | |||
group · current A collection of objects for configuring the thresholds for an Errored Symbol Period Event. Each [802.3ah] defined Event Notification TLV has its own conformance group because each event can be implemented independently of any other. | ||||
| GhwDot3ahEfmErrFramePeriodEventGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.21 | |||
group · current A collection of objects for configuring the thresholds for an Errored Frame Period Event. Each [802.3ah] defined Event Notification TLV has its own conformance group because each event can be implemented independently of any other. | ||||
| GhwDot3ahEfmErrFrameEventGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.22 | |||
group · current A collection of objects for configuring the thresholds for an Errored Frame Event. Each [802.3ah] defined Event Notification TLV has its own conformance group because each event can be implemented independently of any other. | ||||
| GhwDot3ahEfmErrFrameSecsSummaryEventGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.23 | |||
group · current A collection of objects for configuring the thresholds for an Errored Frame Seconds Summary Event. Each [802.3ah] defined Event Notification TLV has its own conformance group because each event can be implemented independently of any other. | ||||
| GhwDot3ahEfmFlagEventGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.24 | |||
group · current A collection of objects for configuring the sending OAMPDUs with the critical event flag or dying gasp flag enabled. | ||||
| GhwDot3ahEfmEventLogGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.25 | |||
group · current A collection of objects for configuring the thresholds for an Errored Frame Seconds Summary Event and maintaining the event information.
| ||||
| GhwDot3ahEfmManagerGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.26 | |||
| GhwDot3ahEvrrpGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.27 | |||
group · current A collection of objects for displaying and maintaining the infomation for Evrrp state. | ||||
| GhwY1731BaseConfigGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.28 | |||
group · current A collection of objects for configuring OAM functions for base. | ||||
| GhwY1731ConfigGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.29 | |||
group · current A collection of objects for configuring OAM functions for performance monitoring.
| ||||
| GhwY1731AisGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.30 | |||
group · current A collection of objects for configuring the Alarm Indication Signal (AIS) function to suppress alarms. | ||||
| GhwY1731AisVlanGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.31 | |||
group · current A collection of objects for configuring the information about the VLAN that receives AIS frames. | ||||
| GhwY1731AisLinkStatusGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.32 | |||
group · current A collection of objects for configuring sending AIS packets when the status of the interface which is monitored goes down.
| ||||
| GhwY1731MulPingGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.33 | |||
group · current A collection of objects for configuring the multicast MAC ping function.
| ||||
| GhwY1731MulPingReplyGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.34 | |||
group · current A collection of objects for displaying information about the multicast LBRs for responding to the multicast MAC ping operation. | ||||
| GhwY1731ResetStatisticGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.35 | |||
group · current A collection of objects for reset Y1731 statistic information. | ||||
| GhwY1731ManagerGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.36 | |||
group · current Y.1731 detecting group
| ||||
| GhwY1731AisVlanConfigGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.37 | |||
group · current A collection of objects for configuring the information about the VLAN that receives AIS frames. | ||||
| GhwDot1agCfmMPGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.38 | |||
| GhwY1731TestIdGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.39 | |||
group · current A collection of objects for configuring the information about TestId.
| ||||
| GhwY1731TestIdSingleEndedLMSendGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.40 | |||
group · current A collection of objects for configuring the information about the single-ended ETH-LM sending function. | ||||
| GhwY1731TestIdSingleEndedLMReceiveGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.41 | |||
group · current A collection of objects for configuring the information about the single-ended ETH-LM receiving function. | ||||
| GhwY1731TestIdOneWayDMSendGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.42 | |||
group · current A collection of objects for configuring the information about the one-way ETH-DM sending function. | ||||
| GhwY1731TestIdOneWayDMReceiveGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.43 | |||
group · current A collection of objects for configuring the information about the one-way ETH-DM receiving function. | ||||
| GhwY1731TestIdTwoWayDMSendGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.44 | |||
group · current A collection of objects for configuring the information about the two-way ETH-DM sending function. | ||||
| GhwY1731TestIdTwoWayDMReceiveGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.45 | |||
group · current A collection of objects for configuring the information about the two-way ETH-DM receiving function. | ||||
| GhwY1731TestIdSingleLossStatTableGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.46 | |||
group · current A collection of objects for storing the result of single-ended ETH-LM. | ||||
| GhwY1731TestIdOneDelayStatTableGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.47 | |||
group · current A collection of objects for storing the result of one-way ETH-DM. | ||||
| GhwY1731TestIdTwoDelayStatTableGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.48 | |||
group · current A collection of objects for storing the result of two-way ETH-DM. | ||||
| GhwY1731TestIdStatisticResetTableGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.49 | |||
group · current A collection of objects for reseting Y1731 statistic information. | ||||
| GhwY1731TestIdTwoDelaySummaryStatTableGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.50 | |||
group · current A collection of objects for storing the statistics of two-way ETH-DM collected during the last period.
| ||||
| GhwY1731TestIdSingleSynLossSummaryStatTableGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.51 | |||
group · current A collection of objects for storing the statistics of single-ended ETH-SLM collected during the last period.
| ||||
| GhwY1731SingleLossSummaryStatTableGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.52 | |||
group · current A collection of objects for storing the statistics of single-ended ETH-LM collected during the last period.
| ||||
| GhwY1731TestIdSingleSynEndedLMSendTableGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.53 | |||
group · current A collection of objects for configuring the information about the single-ended ETH-SLM sending function.
| ||||
| GhwY1731TestIdSingleSynEndedLMReceiveTableGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.54 | |||
group · current A collection of objects for configuring the information about the single-ended ETH-SLM receive function. | ||||
| GhwY1731TestIdSingleLossSummaryStatTableGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.55 | |||
group · current A collection of objects for configuring the information about the single-ended ETH-LM collected during the last period.
| ||||
| GhwY1731TestIdSingleSynLossStatTableGroup | 1.3.6.1.4.1.2011.5.25.136.1.7.2.56 | |||
group · current A collection of objects for storing the result of single-ended ETH-SLM.
| ||||
| NhwEthOamY1731 | 1.3.6.1.4.1.2011.5.25.136.1.8 | |||
| NhwY1731ConfigObject | 1.3.6.1.4.1.2011.5.25.136.1.8.1 | |||
| ThwY1731BaseConfigTable | 1.3.6.1.4.1.2011.5.25.136.1.8.1.1 | NA | ||
table · not-accessible · current This table is used to configure OAM functions for base. | ||||
| RhwY1731BaseConfigEntry | 1.3.6.1.4.1.2011.5.25.136.1.8.1.1.1 | NA | ||
row · not-accessible · current The configuration entry of base config. | ||||
| ChwY1731PwMeasureMode | 1.3.6.1.4.1.2011.5.25.136.1.8.1.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the PW measure mode. Options: 1. invalid(1) -indicates that the value is invalid if MA is associated with a VLAN. 2. symmetry(2) -indicates that the type of the CfmMdMhfIdPermission is symmetry. 3. asymmetry(3) -indicates that the default value is asymmetry if MA is associated with a VSI or VLL.
| ||||
| ChwY1731OneDelayThreshold | 1.3.6.1.4.1.2011.5.25.136.1.8.1.1.1.2 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current This object indicates the alarm threshold for the one-way ETH-DM. This object can be set only in VLAN. The value ranges from 1 to 4294967295. If hwY1731OneDelayThreshold is set to 0, the default alarm threshold of the one-way frame delay is used. By default, no alarm threshold of the one-way frame delay is set. | ||||
| ChwY1731TwoDelayThreshold | 1.3.6.1.4.1.2011.5.25.136.1.8.1.1.1.3 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current This object indicates the alarm threshold for the two-way ETH-DM. This object can be set only in VLAN. The value ranges from 1 to 4294967295. If hwY1731TwoDelayThreshold is set to 0, the default alarm threshold of the two-way frame delay is used. By default, no alarm threshold of the two-way frame delay is set. | ||||
| ThwY1731ConfigTable | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2 | NA | ||
table · not-accessible · current This table is used to configure OAM functions for performance monitoring. | ||||
| RhwY1731ConfigEntry | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1 | NA | ||
row · not-accessible · current The configuration entry of performance monitoring functions. | ||||
| ChwY1731RemoteIp | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current This object indicates the IP address of the remote end. | ||||
| ChwY1731VcId | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.2 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current This object indicates the VC ID. | ||||
| ChwY1731MacAddress | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.3 | MacAddress | NA | |
column · MacAddress · not-accessible · current This object indicates the MAC address of the remote end. | ||||
| ChwY1731ResvIndex | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.4 | Integer32 | NA | |
column · Integer32 · not-accessible · current This object indicates the index for reserve. | ||||
| ChwY1731ServiceType | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the type of service. Options: 1. vlan(1) -indicates that the type of service is vlan. 2. vsi(2) -indicates that the type of service is vsi. 3. vll(3) -indicates that the type of service is vll. 4. unknown(4) -indicates that the type of service is unknown. 5. unbind(5) -indicates that the type of service is unbind. 6. ccc(6) -indicates that the type of service is ccc.
| ||||
| ChwY1731SingleLossRecvEnable | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.6 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current This object indicates whether the single-ended ETH-LM receiving is enabled on the MEP
in the MA to implement the single-ended ETH-LM.
The value can be:
enabled
disabled
By default, the value is disabled. | ||||
| ChwY1731OneDelayRecvEnable | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.7 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current This object indicates whether the one-way ETH-DM receiving is enabled on the MEP
in the MA to implement the one-way ETH-DM.
The value can be:
enabled
disabled
By default, the value is disabled. | ||||
| ChwY1731OneDelayRecvEnableIsContinue | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.8 | TruthValue | RC | |
column · TruthValue · read-create · current This object indicates whether the one-way ETH-DM receiving is continual. | ||||
| ChwY1731TwoDelayRecvEnable | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.9 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current This object indicates whether the two-way ETH-DM receiving is enabled on the MEP
in the MA to implement the two-way ETH-DM.
The value can be:
enabled
disabled
By default, the value is disabled. | ||||
| ChwY1731SingleLossEnable | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.10 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current This object indicates whether the single-ended ETH-LM sending is enabled.
The value can be:
enabled
disabled
By default, the value is disabled. | ||||
| ChwY1731SingleLossIsContinue | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.11 | TruthValue | RC | |
column · TruthValue · read-create · current This object indicates whether the single-ended ETH-LM sending is continual. If the value is 'false', it indicates that the single-ended ETH-LM is on-demand. | ||||
| ChwY1731SingleLossMepId | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.12 | Integer32 (0 | 1..8191) | RC | |
column · Integer32 (0 | 1..8191) · read-create · current This object indicates the ID of the local MEP that is specified in the single-ended ETH-LM operation. The value can be 0 or ranges from 1 to 8191. The value 0 is an invalid value. | ||||
| ChwY1731SingleLossDestIsMepId | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.13 | TruthValue | RC | |
column · TruthValue · read-create · current This object indicates whether the destination MAC address of the single-ended ETH-LM is the specified RMEP's MAC address. | ||||
| ChwY1731SingleLossDestMepId | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.14 | Integer32 (0 | 1..8191) | RC | |
column · Integer32 (0 | 1..8191) · read-create · current This object indicates the ID of the remote MEP that is specified in the single-ended ETH-LM operation. The value 0 is an invalid value. | ||||
| ChwY1731SingleLossMacAddress | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.15 | MacAddress | RC | |
column · MacAddress · read-create · current This object indicates the MAC address of the remote end. | ||||
| ChwY1731SingleLossInterval | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.16 | INTEGER | RC | |
column · INTEGER · read-create · current This object indicates the interval of the sent LMM frames.
When on-demand OAM, the value can be:
1 second
10 seconds
When proactive OAM, the value can be:
1 second
10 seconds
30 seconds
Options:
1. invalid(1) -invalid value.
2. interval1s(2) -1 second.
3. interval10s(3) -10 seconds.
4. interval30s(4) -30 seconds.
| ||||
| ChwY1731SingleLossCount | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.17 | Integer32 (0 | 1..60) | RC | |
column · Integer32 (0 | 1..60) · read-create · current This object indicates the number of LMM frames to be sent. The value can be 0 or ranges from 1 to 60. When proactive OAM, the value is 0. | ||||
| ChwY1731SingleLoss8021pValue | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.18 | Integer32 (0 | 1..255) | RC | |
column · Integer32 (0 | 1..255) · read-create · current This object indicates the 802.1p priority of the sent LMM packets. The priority value ranges from 0 to 7. It maps a 8 bits number. 0 - 1 (0x01) 1 - 2 (0x02) 2 - 4 (0x04) 3 - 8 (0x08) 4 - 16 (0x10) 5 - 32 (0x20) 6 - 64 (0x40) 7 - 128(0x80) For example, if 802.1p priority is 0 , 4 , 7, the value is 145(1 + 16 + 128). The value 0 indicates that the priority is not set. | ||||
| ChwY1731DualLossEnable | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.19 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current This object indicates whether the dual-ended ETH-LM is enabled. The value can be: enabled disabled By default, the value is disabled. | ||||
| ChwY1731DualLossMepId | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.20 | Integer32 (0 | 1..8191) | RC | |
column · Integer32 (0 | 1..8191) · read-create · current This object indicates the ID of the local MEP that is specified in the dual-ended ETH-LM operation. The value can be 0 or ranges from 1 to 8191. The value 0 is an invalid value. | ||||
| ChwY1731DualLossDestMepId | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.21 | Integer32 (0 | 1..8191) | RC | |
column · Integer32 (0 | 1..8191) · read-create · current This object indicates the ID of the remote MEP that is specified in the dual-ended ETH-LM operation. The value can be 0 or ranges from 1 to 8191. The value 0 is an invalid value. | ||||
| ChwY1731OneDelayEnable | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.22 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current This object indicates whether the one-way ETH-DM sending is enabled. The value can be: enabled disabled By default, the value is disabled. | ||||
| ChwY1731OneDelayIsContinue | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.23 | TruthValue | RC | |
column · TruthValue · read-create · current This object indicates whether the one-way ETH-DM sending is continual. If the value is 'false', it indicates that the one-way ETH-DM is on-demand. | ||||
| ChwY1731OneDelayMepId | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.24 | Integer32 (0 | 1..8191) | RC | |
column · Integer32 (0 | 1..8191) · read-create · current This object indicates the ID of the local MEP that is specified in the one-way ETH-DM operation. The value can be 0 or ranges from 1 to 8191. The value 0 is an invalid value. | ||||
| ChwY1731OneDelayDestIsMepId | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.25 | TruthValue | RC | |
column · TruthValue · read-create · current This object indicates whether the destination MAC address of the one-way ETH-DM is the specified RMEP's MAC address. | ||||
| ChwY1731OneDelayDestMepId | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.26 | Integer32 (0 | 1..8191) | RC | |
column · Integer32 (0 | 1..8191) · read-create · current This object indicates the ID of the remote MEP that is specified in the one-way ETH-DM operation. The value can be 0 or ranges from 1 to 8191. The value 0 is an invalid value. | ||||
| ChwY1731OneDelayMacAddress | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.27 | MacAddress | RC | |
column · MacAddress · read-create · current This object indicates the MAC address of the RMEP. | ||||
| ChwY1731OneDelayInterval | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.28 | INTEGER | RC | |
column · INTEGER · read-create · current This object indicates the interval of the sent 1DM frames.
When on-demand OAM, the value can be:
1 second
10 seconds
When proactive OAM, the value can be:
1 second
10 seconds
30 seconds
Options:
1. invalid(1) -invalid value.
2. interval1s(2) -1 second.
3. interval10s(3) -10 seconds.
4. interval30s(4) -30 seconds.
| ||||
| ChwY1731OneDelayCount | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.29 | Integer32 (0 | 1..60) | RC | |
column · Integer32 (0 | 1..60) · read-create · current This object indicates the number of the sent 1DM frames. The value can be 0 or ranges from 1 to 60. When proactive OAM, the value is 0. | ||||
| ChwY1731OneDelay8021pValue | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.30 | Integer32 (0 | 1..255) | RC | |
column · Integer32 (0 | 1..255) · read-create · current This object indicates the 802.1p priority of the sent 1DM packets. The priority value ranges from 0 to 7. It maps a 8 bits number. 0 - 1 (0x01) 1 - 2 (0x02) 2 - 4 (0x04) 3 - 8 (0x08) 4 - 16 (0x10) 5 - 32 (0x20) 6 - 64 (0x40) 7 - 128(0x80) For example, if 802.1p priority is 0, 4 , 7, the value is 145(1 + 16 + 128). The value 0 indicates that the priority is not set. | ||||
| ChwY1731TwoDelayEnable | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.31 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current This object indicates whether the two-way ETH-DM sending is enabled. | ||||
| ChwY1731TwoDelayIsContinue | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.32 | TruthValue | RC | |
column · TruthValue · read-create · current This object indicates whether the two-way ETH-DM sending is continual. If the value is 'false', it indicates that the two-way ETH-DM is on-demand. | ||||
| ChwY1731TwoDelayMepId | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.33 | Integer32 (0 | 1..8191) | RC | |
column · Integer32 (0 | 1..8191) · read-create · current This object indicates the ID of the local MEP that is specified in the two-way ETH-DM operation. The value can be 0 or ranges from 1 to 8191. The value 0 is an invalid value. | ||||
| ChwY1731TwoDelayDestIsMepId | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.34 | TruthValue | RC | |
column · TruthValue · read-create · current This object indicates whether the destination MAC address of the two-way ETH-DM is the specified RMEP's MAC address. | ||||
| ChwY1731TwoDelayDestMepId | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.35 | Integer32 (0 | 1..8191) | RC | |
column · Integer32 (0 | 1..8191) · read-create · current This object indicates the ID of the remote MEP that is specified in the two-way ETH-DM operation. The value can be 0 or ranges from 1 to 8191. The value 0 is an invalid value. | ||||
| ChwY1731TwoDelayMacAddress | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.36 | MacAddress | RC | |
column · MacAddress · read-create · current This object indicates the destination MAC address. | ||||
| ChwY1731TwoDelayInterval | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.37 | INTEGER | RC | |
column · INTEGER · read-create · current This object indicates the interval of the sent DMM frames.
When on-demand OAM, the value can be:
1 second
10 seconds
When proactive OAM, the value can be:
1 second
10 seconds
30 seconds
Options:
1. invalid(1) -invalid value.
2. interval1s(2) -1 second.
3. interval10s(3) -10 seconds.
4. interval30s(4) -30 seconds.
| ||||
| ChwY1731TwoDelayCount | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.38 | Integer32 (0 | 1..60) | RC | |
column · Integer32 (0 | 1..60) · read-create · current This object indicates the number of the sent DMM frames. The value can be 0 or ranges from 1 to 60. When proactive OAM, the value is 0. | ||||
| ChwY1731TwoDelay8021pValue | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.39 | Integer32 (0 | 1..255) | RC | |
column · Integer32 (0 | 1..255) · read-create · current This object indicates the 802.1p priority of the sent DMM packets. The priority value ranges from 0 to 7. It maps a 8 bits number. 0 - 1 (0x01) 1 - 2 (0x02) 2 - 4 (0x04) 3 - 8 (0x08) 4 - 16 (0x10) 5 - 32 (0x20) 6 - 64 (0x40) 7 - 128(0x80) For example, if 802.1p priority is 0 , 4 , 7, the value is 145(1 + 16 + 128). The value 0 indicates that the priority is not set. | ||||
| ChwY1731SingleLossRecv8021pValue | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.40 | Integer32 (0 | 1..255) | RC | |
column · Integer32 (0 | 1..255) · read-create · current This object indicates the 802.1p priority of the received LMM packets. The priority value ranges from 0 to 7. It maps a 8 bits number. 0 - 1 (0x01) 1 - 2 (0x02) 2 - 4 (0x04) 3 - 8 (0x08) 4 - 16 (0x10) 5 - 32 (0x20) 6 - 64 (0x40) 7 - 128(0x80) For example, if 802.1p priority is 0 , 4 , 7, the value is 145(1 + 16 + 128). The value 0 indicates that the priority is not set. | ||||
| ChwY1731OneDelayRecv8021pValue | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.41 | Integer32 (0 | 1..255) | RC | |
column · Integer32 (0 | 1..255) · read-create · current This object indicates the 802.1p priority of the received 1DM packets. The priority value ranges from 0 to 7. It maps a 8 bits number. 0 - 1 (0x01) 1 - 2 (0x02) 2 - 4 (0x04) 3 - 8 (0x08) 4 - 16 (0x10) 5 - 32 (0x20) 6 - 64 (0x40) 7 - 128(0x80) For example, if 802.1p priority is 0 , 4 , 7, the value is 145(1 + 16 + 128). The value 0 indicates that the priority is not set. | ||||
| ChwY1731TwoDelayRecv8021pValue | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.42 | Integer32 (0 | 1..255) | RC | |
column · Integer32 (0 | 1..255) · read-create · current This object indicates the 802.1p priority of the received DMM packets. The priority value ranges from 0 to 7. It maps a 8 bits number. 0 - 1 (0x01) 1 - 2 (0x02) 2 - 4 (0x04) 3 - 8 (0x08) 4 - 16 (0x10) 5 - 32 (0x20) 6 - 64 (0x40) 7 - 128(0x80) For example, if 802.1p priority is 0 , 4 , 7, the value is 145(1 + 16 + 128). The value 0 indicates that the priority is not set. | ||||
| ChwY1731SingleLossRecvMepId | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.43 | Integer32 (0 | 1..8191) | RC | |
column · Integer32 (0 | 1..8191) · read-create · current This object indicates the ID of the local MEP. The value can be 0 or ranges from 1 to 8191. The value 0 is an invalid value. | ||||
| ChwY1731OneDelayRecvMepId | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.44 | Integer32 (0 | 1..8191) | RC | |
column · Integer32 (0 | 1..8191) · read-create · current This object indicates the ID of the local MEP. The value can be 0 or ranges from 1 to 8191. The value 0 is an invalid value. | ||||
| ChwY1731TwoDelayRecvMepId | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.45 | Integer32 (0 | 1..8191) | RC | |
column · Integer32 (0 | 1..8191) · read-create · current This object indicates the ID of the local MEP. The value can be 0 or ranges from 1 to 8191. The value 0 is an invalid value. | ||||
| ChwY1731OneDelayPacketSize | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.46 | Integer32 (0 | 64..1518) | RC | |
column · Integer32 (0 | 64..1518) · read-create · current This object indicates the size of one-way ETH-DM packet. The value can be 0 or ranges from 64 to 1518. The value 0 means that the packet size is not specified. By default, the value is 0. | ||||
| ChwY1731TwoDelayPacketSize | 1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.47 | Integer32 (0 | 64..1518) | RC | |
column · Integer32 (0 | 64..1518) · read-create · current This object indicates the size of a two-way ETH-DM packet. The value can be 0 or ranges from 64 to 1518. The value 0 means that the packet size is not specified. By default, the value is 0. | ||||
| ThwY1731AisTable | 1.3.6.1.4.1.2011.5.25.136.1.8.1.3 | NA | ||
table · not-accessible · current This table is used to configure the Alarm Indication Signal (AIS) function to suppress alarms. | ||||
| RhwY1731AisEntry | 1.3.6.1.4.1.2011.5.25.136.1.8.1.3.1 | NA | ||
row · not-accessible · current The entry of alarm indication signal. | ||||
| ChwY1731AisEnable | 1.3.6.1.4.1.2011.5.25.136.1.8.1.3.1.1 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current This object indicates whether the AIS function is enabled in the current MA. The value of this object can be: enabled disabled By default, the value is disabled. | ||||
| ChwY1731AisSendLevel | 1.3.6.1.4.1.2011.5.25.136.1.8.1.3.1.2 | Integer32 (-1 | 0..7) | RC | |
column · Integer32 (-1 | 0..7) · read-create · current This object indicates the level of the sent AIS frames. The value can be -1 or ranges from 0 to 7. The value -1 is an invalid value. | ||||
| ChwY1731AisSendInterval | 1.3.6.1.4.1.2011.5.25.136.1.8.1.3.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current This object indicates the interval of the sent AIS frames. Options: 1. interval1s(1) -1 second. 2. interval60s(2) -60 seconds. The default value is 1 second.
| ||||
| ChwY1731AisSendPktStatus | 1.3.6.1.4.1.2011.5.25.136.1.8.1.3.1.4 | EnabledStatus | RO | |
column · EnabledStatus · read-only · current This object indicates whether the current MA is sending AIS frames. The value can be: enabled disabled By default, the value is disabled. | ||||
| ChwY1731AisSuppressEnable | 1.3.6.1.4.1.2011.5.25.136.1.8.1.3.1.5 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current This object indicates whether the alarm suppression function is enabled. The value can be: enabled disabled By default, the value is disabled. | ||||
| ChwY1731AisSuppressStatus | 1.3.6.1.4.1.2011.5.25.136.1.8.1.3.1.6 | EnabledStatus | RO | |
column · EnabledStatus · read-only · current This object indicates whether the alarm function on the current device is in the suppression state. The value can be: enabled disabled | ||||
| ThwY1731AisVlanTable | 1.3.6.1.4.1.2011.5.25.136.1.8.1.4 | NA | ||
table · not-accessible · current This table is used to configure the information about the VLAN that receives AIS frames. | ||||
| RhwY1731AisVlanEntry | 1.3.6.1.4.1.2011.5.25.136.1.8.1.4.1 | NA | ||
row · not-accessible · current The entry of alarm indication signal about vlan infomation. | ||||
| ChwY1731AisPeVlan | 1.3.6.1.4.1.2011.5.25.136.1.8.1.4.1.1 | VlanIdOrNone | RC | |
column · VlanIdOrNone · read-create · current This object indicates the ID of the PE VLAN corresponding to the AIS function. | ||||
| ChwY1731AisLowCeVlan | 1.3.6.1.4.1.2011.5.25.136.1.8.1.4.1.2 | VlanIdOrNone | RC | |
column · VlanIdOrNone · read-create · current This object indicates the lower limit of the ID of the CE VLAN corresponding to the AIS function. | ||||
| ChwY1731AisHighCeVlan | 1.3.6.1.4.1.2011.5.25.136.1.8.1.4.1.3 | VlanIdOrNone | RC | |
column · VlanIdOrNone · read-create · current This object indicates the upper limit of the ID of the CE VLAN corresponding to the AIS function. | ||||
| ChwY1731AisLowDot1qVlan | 1.3.6.1.4.1.2011.5.25.136.1.8.1.4.1.4 | VlanIdOrNone | RC | |
column · VlanIdOrNone · read-create · current This object indicates the lower limit of the ID of the dot1q VLAN corresponding to the AIS function. | ||||
| ChwY1731AisHighDot1qVlan | 1.3.6.1.4.1.2011.5.25.136.1.8.1.4.1.5 | VlanIdOrNone | RC | |
column · VlanIdOrNone · read-create · current This object indicates the upper limit of the ID of the dot1q VLAN corresponding to the AIS function. | ||||
| ChwY1731AisRowStatus | 1.3.6.1.4.1.2011.5.25.136.1.8.1.4.1.99 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the row status of this table. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated. | ||||
| ThwY1731AisLinkStatusTable | 1.3.6.1.4.1.2011.5.25.136.1.8.1.5 | NA | ||
table · not-accessible · current This table is used to enable Y.1731 to send AIS packets when the status of the interface which is monitored goes down. | ||||
| RhwY1731AisLinkStatusEntry | 1.3.6.1.4.1.2011.5.25.136.1.8.1.5.1 | NA | ||
row · not-accessible · current The entry of AIS monitoring the link status of the interface. | ||||
| ChwY1731AisLinkStatusIfIndex | 1.3.6.1.4.1.2011.5.25.136.1.8.1.5.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current This object indicates the index of the interface which is monitored by AIS. | ||||
| ChwY1731AisLinkRowStatus | 1.3.6.1.4.1.2011.5.25.136.1.8.1.5.1.20 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the row status of this table. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated. | ||||
| ThwY1731MulPingTable | 1.3.6.1.4.1.2011.5.25.136.1.8.1.6 | NA | ||
table · not-accessible · current This table is used to configure the multicast MAC ping function. | ||||
| RhwY1731MulPingEntry | 1.3.6.1.4.1.2011.5.25.136.1.8.1.6.1 | NA | ||
| ChwY1731MulPingIndex | 1.3.6.1.4.1.2011.5.25.136.1.8.1.6.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current This object indicates the index of this table. | ||||
| ChwY1731MulPingState | 1.3.6.1.4.1.2011.5.25.136.1.8.1.6.1.2 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current This object indicates whether the multicast MAC ping function is enabled. The value can be: enabled disabled By default, the value is disabled. | ||||
| ChwY1731MulPingMdName | 1.3.6.1.4.1.2011.5.25.136.1.8.1.6.1.3 | OCTET STRING (SIZE (1..43)) | RC | |
column · OCTET STRING (SIZE (1..43)) · read-create · current This object indicates the name of the MD that initiates the multicast MAC ping. | ||||
| ChwY1731MulPingMaName | 1.3.6.1.4.1.2011.5.25.136.1.8.1.6.1.4 | OCTET STRING (SIZE (1..43)) | RC | |
column · OCTET STRING (SIZE (1..43)) · read-create · current This object indicates the name of the MA that initiates the multicast MAC ping. | ||||
| ChwY1731MulPingMepId | 1.3.6.1.4.1.2011.5.25.136.1.8.1.6.1.5 | Integer32 (0 | 1..8191) | RC | |
column · Integer32 (0 | 1..8191) · read-create · current This object indicates the ID of the local MEP of the 802.1ag MAC multicast ping operation. The value ranges from 1 to 8191. By default, the value is 0. | ||||
| ChwY1731MulPingTimeout | 1.3.6.1.4.1.2011.5.25.136.1.8.1.6.1.6 | Unsigned32 (1..65535) | RC | |
column · Unsigned32 (1..65535) · read-create · current This object indicates the timeout period of the multicast MAC ping. The value ranges from 1 to 65535, in milliseconds. By default, the value is 5000. | ||||
| ChwY1731MulPingCount | 1.3.6.1.4.1.2011.5.25.136.1.8.1.6.1.7 | Unsigned32 (1..4294967295) | RC | |
column · Unsigned32 (1..4294967295) · read-create · current This object indicates the number of the sent multicast LBM packets. By default, the value is 3. | ||||
| ChwY1731MulPingPriority | 1.3.6.1.4.1.2011.5.25.136.1.8.1.6.1.8 | Integer32 (0..7 | 255) | RC | |
column · Integer32 (0..7 | 255) · read-create · current This object indicates the priority of the sent LBM packets. The value ranges from 0 to 7 or can be 255. The value 255 is an invalid value. The greater the value is, the higher the priority is. | ||||
| ChwY1731MulPingSendPacketNum | 1.3.6.1.4.1.2011.5.25.136.1.8.1.6.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current This object indicates the number of multicast LBM packets that have been sent. | ||||
| ChwY1731MulPingRecvPacketNum | 1.3.6.1.4.1.2011.5.25.136.1.8.1.6.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current This object indicates the number of multicast LBM packets that have been received. | ||||
| ChwY1731MulPingRecvTimeDelayMin | 1.3.6.1.4.1.2011.5.25.136.1.8.1.6.1.11 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the minimum delay after which LBR packets are received. | ||||
| ChwY1731MulPingRecvTimeDelayMax | 1.3.6.1.4.1.2011.5.25.136.1.8.1.6.1.12 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the maximum delay after which LBR packets are received. | ||||
| ChwY1731MulPingRecvTimeDelayAvg | 1.3.6.1.4.1.2011.5.25.136.1.8.1.6.1.13 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the average delay after which LBR packets are received. | ||||
| ChwY1731MulPingRowStatus | 1.3.6.1.4.1.2011.5.25.136.1.8.1.6.1.99 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the row status of this table. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated. | ||||
| ThwY1731MulPingReplyTable | 1.3.6.1.4.1.2011.5.25.136.1.8.1.7 | NA | ||
table · not-accessible · current This table is used to display information about the multicast LBRs for responding to the multicast MAC ping operation. | ||||
| RhwY1731MulPingReplyEntry | 1.3.6.1.4.1.2011.5.25.136.1.8.1.7.1 | NA | ||
row · not-accessible · current The entry of multicast ping reply. | ||||
| ChwY1731MulPingReplySeqNumber | 1.3.6.1.4.1.2011.5.25.136.1.8.1.7.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current This object indicates the sequence number of the multicast LBR. | ||||
| ChwY1731MulPingReplyOrder | 1.3.6.1.4.1.2011.5.25.136.1.8.1.7.1.2 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current This object indicates the order in which multicast LBRs are received. | ||||
| ChwY1731MulPingReplyMepId | 1.3.6.1.4.1.2011.5.25.136.1.8.1.7.1.3 | Integer32 (0 | 1..8191) | RO | |
column · Integer32 (0 | 1..8191) · read-only · current This object indicates the MEP ID carried in the multicast LBRs. The value ranges from 0 to 8191. The value 0 is an invalid value. | ||||
| ChwY1731MulPingReplyMacAddress | 1.3.6.1.4.1.2011.5.25.136.1.8.1.7.1.4 | MacAddress | RO | |
column · MacAddress · read-only · current This object indicates the MAC address carried in the multicast LBRs. | ||||
| ChwY1731MulPingReplyTransTime | 1.3.6.1.4.1.2011.5.25.136.1.8.1.7.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the period from the time when the multicast LBM is sent to the time when the multicast LBR is received. | ||||
| ThwY1731AisVlanConfigTable | 1.3.6.1.4.1.2011.5.25.136.1.8.1.8 | NA | ||
table · not-accessible · current This table is used to configure the information about the VLAN that receives AIS frames. | ||||
| RhwY1731AisVlanConfigEntry | 1.3.6.1.4.1.2011.5.25.136.1.8.1.8.1 | NA | ||
row · not-accessible · current The entry of alarm indication signal about vlan infomation. | ||||
| ChwY1731AisConfigPeVlan | 1.3.6.1.4.1.2011.5.25.136.1.8.1.8.1.1 | VlanIdOrNone | NA | |
column · VlanIdOrNone · not-accessible · current This object indicates the ID of the PE VLAN corresponding to the AIS function. The value 0 indicates that the PE VLAN is not set. | ||||
| ChwY1731AisConfigVlanListLow | 1.3.6.1.4.1.2011.5.25.136.1.8.1.8.1.2 | OCTET STRING (SIZE (256)) | RC | |
column · OCTET STRING (SIZE (256)) · read-create · current If hwY1731AisConfigPeVlan is set to 0, the object indicates a VLAN list corresponding to the AIS function. If its value is not 0, this object indicates a CE VLAN list. The VLAN ID ranges 1 to 2047. The hwY1731AisConfigVlanListHigh value ranges 2048 to 4094. | ||||
| ChwY1731AisConfigVlanListHigh | 1.3.6.1.4.1.2011.5.25.136.1.8.1.8.1.3 | OCTET STRING (SIZE (256)) | RC | |
column · OCTET STRING (SIZE (256)) · read-create · current If hwY1731AisConfigPeVlan is set to 0, the object indicates a VLAN list corresponding to the AIS function. If its value is not 0, this object indicates a CE VLAN list. The VLAN ID ranges 2048 to 4094. The hwY1731AisConfigVlanListLow value ranges value 1 to 2047. | ||||
| ChwY1731AisVlanConfigRowStatus | 1.3.6.1.4.1.2011.5.25.136.1.8.1.8.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the row status of this table. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated. | ||||
| ThwY1731TestIdTable | 1.3.6.1.4.1.2011.5.25.136.1.8.1.9 | NA | ||
table · not-accessible · current This table defines the information about TestId. | ||||
| RhwY1731TestIdEntry | 1.3.6.1.4.1.2011.5.25.136.1.8.1.9.1 | NA | ||
| ChwY1731TestIdentifier | 1.3.6.1.4.1.2011.5.25.136.1.8.1.9.1.1 | Unsigned32 (1..4294967295) | RO | |
column · Unsigned32 (1..4294967295) · read-only · current This object indicates the ID of the test. | ||||
| ChwY1731TestIdMdName | 1.3.6.1.4.1.2011.5.25.136.1.8.1.9.1.2 | OCTET STRING (SIZE (1..43)) | RC | |
column · OCTET STRING (SIZE (1..43)) · read-create · current This object indicates the name of the MD in which TestId is configured. | ||||
| ChwY1731TestIdMaName | 1.3.6.1.4.1.2011.5.25.136.1.8.1.9.1.3 | OCTET STRING (SIZE (1..43)) | RC | |
column · OCTET STRING (SIZE (1..43)) · read-create · current This object indicates the name of the MA in which TestId is configured. | ||||
| ChwY1731TestIdLocalMepId | 1.3.6.1.4.1.2011.5.25.136.1.8.1.9.1.4 | Integer32 (1..8191) | RC | |
column · Integer32 (1..8191) · read-create · current This object indicates the ID of the local MEP that is specified in the TestId configuration. | ||||
| ChwY1731TestIdDestIsMepId | 1.3.6.1.4.1.2011.5.25.136.1.8.1.9.1.5 | TruthValue | RC | |
column · TruthValue · read-create · current This object indicates whether the destination MAC address is the specified RMEP's MAC address. The default value is false. | ||||
| ChwY1731TestIdDestMepId | 1.3.6.1.4.1.2011.5.25.136.1.8.1.9.1.6 | Integer32 (0 | 1..8191) | RC | |
column · Integer32 (0 | 1..8191) · read-create · current This object indicates the ID of the remote MEP that is specified in the TestId configuration. | ||||
| ChwY1731TestIdDestMepMacAddress | 1.3.6.1.4.1.2011.5.25.136.1.8.1.9.1.7 | MacAddress | RC | |
column · MacAddress · read-create · current This object indicates the MAC address of the remote end. | ||||
| ChwY1731TestIdOnwardMacAddress | 1.3.6.1.4.1.2011.5.25.136.1.8.1.9.1.8 | MacAddress | RC | |
column · MacAddress · read-create · current This object indicates the onward MAC address. | ||||
| ChwY1731TestIdBackwardMacAddress | 1.3.6.1.4.1.2011.5.25.136.1.8.1.9.1.9 | MacAddress | RC | |
column · MacAddress · read-create · current This object indicates the backward MAC address. | ||||
| ChwY1731TestIdIsUpdateOnwardMacAddress | 1.3.6.1.4.1.2011.5.25.136.1.8.1.9.1.10 | TruthValue | RC | |
column · TruthValue · read-create · current This object indicates whether the onward MAC address is updated automatically. The default value is false. | ||||
| ChwY1731TestIdIsUpdateBackwardMacAddress | 1.3.6.1.4.1.2011.5.25.136.1.8.1.9.1.11 | TruthValue | RC | |
column · TruthValue · read-create · current This object indicates whether the backward MAC address is updated automatically. The default value is false. | ||||
| ChwY1731TestId8021pValue | 1.3.6.1.4.1.2011.5.25.136.1.8.1.9.1.12 | Integer32 (0..7 | 255) | RC | |
column · Integer32 (0..7 | 255) · read-create · current This object indicates the 802.1p priority. The value 255 is an invalid value. | ||||
| ChwY1731TestIdUplink8021p | 1.3.6.1.4.1.2011.5.25.136.1.8.1.9.1.13 | Integer32 (0..7 | 255) | RC | |
column · Integer32 (0..7 | 255) · read-create · current This object indicates the 802.1p priority of uplink packets. The value 255 is an invalid value. | ||||
| ChwY1731TestIdDownlink8021p | 1.3.6.1.4.1.2011.5.25.136.1.8.1.9.1.14 | Integer32 (0..7 | 255) | RC | |
column · Integer32 (0..7 | 255) · read-create · current This object indicates the 802.1p priority of downlink packets. The value 255 is an invalid value. | ||||
| ChwY1731TestIdDescription | 1.3.6.1.4.1.2011.5.25.136.1.8.1.9.1.15 | OCTET STRING (SIZE (0..63)) | RC | |
column · OCTET STRING (SIZE (0..63)) · read-create · current This object indicates the description of TestId. | ||||
| ChwY1731TestIdIsRecordFile | 1.3.6.1.4.1.2011.5.25.136.1.8.1.9.1.16 | TruthValue | RC | |
column · TruthValue · read-create · current This object indicates whether the statistics of the testid will be recorded in testid file. The default value is false. | ||||
| ChwY1731TestIdQueuePriority | 1.3.6.1.4.1.2011.5.25.136.1.8.1.9.1.17 | INTEGER | RC | |
column · INTEGER · read-create · current This object indicates the queue priority. The queue priority can be (1..9). Options: 1. invalid(1) -indicates that the queue priority is invalid. 2. af1(2) -indicates that the queue priority is af1. 3. af2(3) -indicates that the queue priority is af2. 4. af3(4) -indicates that the queue priority is af3. 5. af4(5) -indicates that the queue priority is af4. 6. be(6) -indicates that the queue priority is be. 7. cs6(7) -indicates that the queue priority is cs6. 8. cs7(8) -indicates that the queue priority is cs7. 9. ef(9) -indicates that the queue priority is ef.
| ||||
| ChwY1731TestIdRowStatus | 1.3.6.1.4.1.2011.5.25.136.1.8.1.9.1.99 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the row status of this table. All columns MUST have a valid value before a row can be activated. | ||||
| ThwY1731TestIdSingleEndedLMSendTable | 1.3.6.1.4.1.2011.5.25.136.1.8.1.10 | NA | ||
table · not-accessible · current This table configures the single-ended ETH-LM sending function. | ||||
| RhwY1731TestIdSingleEndedLMSendEntry | 1.3.6.1.4.1.2011.5.25.136.1.8.1.10.1 | NA | ||
row · not-accessible · current The configuration entry of the single-ended ETH-LM sending function. | ||||
| ChwY1731TestIdSingleEndedLMSendIsContinue | 1.3.6.1.4.1.2011.5.25.136.1.8.1.10.1.1 | TruthValue | RC | |
column · TruthValue · read-create · current This object indicates whether single-ended ETH-LM sending is continual. If the value is 'false', it indicates that the single-ended ETH-LM is on-demand. | ||||
| ChwY1731TestIdSingleEndedLMSendInterval | 1.3.6.1.4.1.2011.5.25.136.1.8.1.10.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current This object indicates the interval at which LMM frames are sent. Options: 1. invalid(1) -invalid value. 2. interval1s(2) -1 second. 3. interval10s(3) -10 seconds. 4. interval30s(4) -30 seconds. 5. interval60s(5) -60 seconds.
| ||||
| ChwY1731TestIdSingleEndedLMSendCount | 1.3.6.1.4.1.2011.5.25.136.1.8.1.10.1.3 | Integer32 (0 | 1..60) | RC | |
column · Integer32 (0 | 1..60) · read-create · current This object indicates the number of the sent LMM frames. The value can be 0 or ranges from 1 to 60. In a proactive OAM scenario, the value is 0. | ||||
| ChwY1731TestIdSingleEndedLMSendRowStatus | 1.3.6.1.4.1.2011.5.25.136.1.8.1.10.1.99 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the row status of this table. All columns MUST have a valid value before a row can be activated. | ||||
| ThwY1731TestIdSingleEndedLMReceiveTable | 1.3.6.1.4.1.2011.5.25.136.1.8.1.11 | NA | ||
table · not-accessible · current This table configures the single-ended ETH-LM receiving function. | ||||
| RhwY1731TestIdSingleEndedLMReceiveEntry | 1.3.6.1.4.1.2011.5.25.136.1.8.1.11.1 | NA | ||
row · not-accessible · current The configuration entry of the single-ended ETH-LM receiving function. | ||||
| ChwY1731TestIdSingleEndedLMReceiveRowStatus | 1.3.6.1.4.1.2011.5.25.136.1.8.1.11.1.99 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the row status of this table. All columns MUST have a valid value before a row can be activated. | ||||
| ThwY1731TestIdOneWayDMSendTable | 1.3.6.1.4.1.2011.5.25.136.1.8.1.12 | NA | ||
table · not-accessible · current This table configures the one-way ETH-DM sending function. | ||||
| RhwY1731TestIdOneWayDMSendEntry | 1.3.6.1.4.1.2011.5.25.136.1.8.1.12.1 | NA | ||
row · not-accessible · current The configuration entry of the one-way ETH-DM sending function. | ||||
| ChwY1731TestIdOneWayDMSendIsContinue | 1.3.6.1.4.1.2011.5.25.136.1.8.1.12.1.1 | TruthValue | RC | |
column · TruthValue · read-create · current This object indicates whether one-way ETH-DM sending is continual. If the value is 'false', it indicates that one-way ETH-DM is on-demand. | ||||
| ChwY1731TestIdOneWayDMSendInterval | 1.3.6.1.4.1.2011.5.25.136.1.8.1.12.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current This object indicates the interval at which 1DM frames are sent. Options: 1. invalid(1) -invalid value. 2. interval1s(2) -1 second. 3. interval10s(3) -10 seconds. 4. interval30s(4) -30 seconds. 5. interval60s(5) -60 seconds.
| ||||
| ChwY1731TestIdOneWayDMSendCount | 1.3.6.1.4.1.2011.5.25.136.1.8.1.12.1.3 | Integer32 (0 | 1..60) | RC | |
column · Integer32 (0 | 1..60) · read-create · current This object indicates the number of 1DM frames to be sent. In a proactive OAM scenario, the value is 0. | ||||
| ChwY1731TestIdOneWayDMSendPacketSize | 1.3.6.1.4.1.2011.5.25.136.1.8.1.12.1.4 | Integer32 (0 | 64..1518) | RC | |
column · Integer32 (0 | 64..1518) · read-create · current This object indicates the size of a one-way ETH-DM packet. The value 0 means that the packet size is not specified. By default, the value is 0. | ||||
| ChwY1731TestIdOneWayDMSendRowStatus | 1.3.6.1.4.1.2011.5.25.136.1.8.1.12.1.99 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the row status of this table. All columns MUST have a valid value before a row can be activated. | ||||
| ThwY1731TestIdOneWayDMReceiveTable | 1.3.6.1.4.1.2011.5.25.136.1.8.1.13 | NA | ||
table · not-accessible · current This table configures the one-way ETH-DM receiving function. | ||||
| RhwY1731TestIdOneWayDMReceiveEntry | 1.3.6.1.4.1.2011.5.25.136.1.8.1.13.1 | NA | ||
row · not-accessible · current The configuration entry of one-way ETH-DM receiving function. | ||||
| ChwY1731TestIdOneWayDMReceiveIsContinue | 1.3.6.1.4.1.2011.5.25.136.1.8.1.13.1.1 | TruthValue | RC | |
column · TruthValue · read-create · current This object indicates whether one-way ETH-DM receiving is continual. If the value is 'false', it indicates that one-way ETH-DM is on-demand. | ||||
| ChwY1731TestIdOneWayDMReceiveRowStatus | 1.3.6.1.4.1.2011.5.25.136.1.8.1.13.1.99 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the row status of this table. All columns MUST have a valid value before a row can be activated. | ||||
| ThwY1731TestIdTwoWayDMSendTable | 1.3.6.1.4.1.2011.5.25.136.1.8.1.14 | NA | ||
table · not-accessible · current This table is used to configure the two-way ETH-DM sending function. | ||||
| RhwY1731TestIdTwoWayDMSendEntry | 1.3.6.1.4.1.2011.5.25.136.1.8.1.14.1 | NA | ||
row · not-accessible · current The configuration entry of the two-way ETH-DM sending function. | ||||
| ChwY1731TestIdTwoWayDMSendIsContinue | 1.3.6.1.4.1.2011.5.25.136.1.8.1.14.1.1 | TruthValue | RC | |
column · TruthValue · read-create · current This object indicates whether two-way ETH-DM sending is continual. If the value is 'false', it indicates that two-way ETH-DM is on-demand. | ||||
| ChwY1731TestIdTwoWayDMSendInterval | 1.3.6.1.4.1.2011.5.25.136.1.8.1.14.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current This object indicates the interval at which DMM frames are sent.
When on-demand OAM, the value can be:
1 second
10 seconds
30 seconds
60 seconds
15 seconds
Options:
1. invalid(1) -invalid value.
2. interval1s(2) -1 second.
3. interval10s(3) -10 seconds.
4. interval30s(4) -30 seconds.
5. interval60s(5) -60 seconds.
6. interval15s(6) -15 seconds.
| ||||
| ChwY1731TestIdTwoWayDMSendCount | 1.3.6.1.4.1.2011.5.25.136.1.8.1.14.1.3 | Integer32 (0 | 1..60) | RC | |
column · Integer32 (0 | 1..60) · read-create · current This object indicates the number of DMM frames to be sent. In a proactive OAM scenario, the value is 0. | ||||
| ChwY1731TestIdTwoWayDMSendPacketSize | 1.3.6.1.4.1.2011.5.25.136.1.8.1.14.1.4 | Integer32 (0 | 64..1518) | RC | |
column · Integer32 (0 | 64..1518) · read-create · current This object indicates the size of two-way ETH-DM packet. The value 0 means that the packet size is not specified. By default, the value is 0. | ||||
| ChwY1731TestIdTwoWayDMSendRowStatus | 1.3.6.1.4.1.2011.5.25.136.1.8.1.14.1.99 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the row status of this table. All columns MUST have a valid value before a row can be activated. | ||||
| ThwY1731TestIdTwoWayDMReceiveTable | 1.3.6.1.4.1.2011.5.25.136.1.8.1.15 | NA | ||
table · not-accessible · current This table configures the two-way ETH-DM receiving function. | ||||
| RhwY1731TestIdTwoWayDMReceiveEntry | 1.3.6.1.4.1.2011.5.25.136.1.8.1.15.1 | NA | ||
row · not-accessible · current The configuration entry of the two-way ETH-DM receiving function. | ||||
| ChwY1731TestIdTwoWayDMReceiveRowStatus | 1.3.6.1.4.1.2011.5.25.136.1.8.1.15.1.99 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the row status of this table. All columns MUST have a valid value before a row can be activated. | ||||
| ThwY1731TestIdSingleSynEndedLMSendTable | 1.3.6.1.4.1.2011.5.25.136.1.8.1.16 | NA | ||
table · not-accessible · current This table configures the single-ended ETH-SLM sending function. | ||||
| RhwY1731TestIdSingleSynEndedLMSendEntry | 1.3.6.1.4.1.2011.5.25.136.1.8.1.16.1 | NA | ||
row · not-accessible · current The configuration entry of the single-ended ETH-SLM sending function. | ||||
| ChwY1731TestIdSingleSynEndedLMSendIsContinue | 1.3.6.1.4.1.2011.5.25.136.1.8.1.16.1.1 | TruthValue | RC | |
column · TruthValue · read-create · current This object indicates whether single-ended ETH-SLM sending is continual. If the value is 'false', it indicates that the single-ended ETH-SLM is on-demand. | ||||
| ChwY1731TestIdSingleSynEndedLMSendInterval | 1.3.6.1.4.1.2011.5.25.136.1.8.1.16.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current This object indicates the interval at which single-ended ETH-SLM frames are sent.
the value can be:
1 second
10 seconds
3.3 milliseconds
10 milliseconds
100 milliseconds
Options:
1. invalid(1) -invalid value
2. interval1s(2) -1 second
3. interval10s(3) -10 seconds
4. interval3Dot3ms(4) -3.3 milliseconds
5. interval10ms(5) -10 milliseconds
6. interval100ms(6) -100 milliseconds
| ||||
| ChwY1731TestIdSingleSynEndedLMSendCount | 1.3.6.1.4.1.2011.5.25.136.1.8.1.16.1.3 | Integer32 (0 | 1..1000) | RC | |
column · Integer32 (0 | 1..1000) · read-create · current This object indicates the number of the sent single-ended ETH-SLM frames. The value can be 0 or ranges from 1 to 1000. In a proactive OAM scenario, the value is 0. | ||||
| ChwY1731TestIdSingleSynEndedLMSendTimeOut | 1.3.6.1.4.1.2011.5.25.136.1.8.1.16.1.4 | Integer32 (0 | 1..10) | RC | |
column · Integer32 (0 | 1..10) · read-create · current This object indicates The timeout of single-ended synthetic loss measurement frames (SLM) waiting for ACK frames (SLR). The value can be 0 or ranges from 1 to 10. In a proactive OAM scenario, the value is 0. | ||||
| ChwY1731TestIdSingleSynEndedLMSendRowStatus | 1.3.6.1.4.1.2011.5.25.136.1.8.1.16.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the row status of this table. All columns MUST have a valid value before a row can be activated. | ||||
| ChwY1731TestIdSingleSynEndedLMSendPacketSize | 1.3.6.1.4.1.2011.5.25.136.1.8.1.16.1.6 | Integer32 (0 | 64..1518) | RC | |
column · Integer32 (0 | 64..1518) · read-create · current This object indicates the packetsize of single-ended synthetic loss measurement frames The value can be 0 or ranges from 64 to 1518. In a proactive OAM scenario, the value is 0. | ||||
| ChwY1731TestIdSingleSynEndedLMSendMeasureMentCount | 1.3.6.1.4.1.2011.5.25.136.1.8.1.16.1.7 | Integer32 (0 | 1..60) | RC | |
column · Integer32 (0 | 1..60) · read-create · current This object indicates the measurementcount of single-ended synthetic loss measurement frames The value can be 0 or ranges from 1 to 60. In a proactive OAM scenario, the value is 0. | ||||
| ThwY1731TestIdSingleSynEndedLMReceiveTable | 1.3.6.1.4.1.2011.5.25.136.1.8.1.17 | NA | ||
table · not-accessible · current This table configures the single-ended ETH-SLM receive function. | ||||
| RhwY1731TestIdSingleSynEndedLMReceiveEntry | 1.3.6.1.4.1.2011.5.25.136.1.8.1.17.1 | NA | ||
row · not-accessible · current The configuration entry of the single-ended ETH-SLM receive function. | ||||
| ChwY1731TestIdSingleSynEndedLMReceiveTimeOut | 1.3.6.1.4.1.2011.5.25.136.1.8.1.17.1.1 | Integer32 (0 | 10..300) | RC | |
column · Integer32 (0 | 10..300) · read-create · current This object indicates the timeout value of receive ETH-SLM frames. The value can be 0 or ranges from 10 to 300. In a proactive OAM scenario, the value is 0. | ||||
| ChwY1731TestIdSingleSynEndedLMReceiveRowStatus | 1.3.6.1.4.1.2011.5.25.136.1.8.1.17.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the row status of this table. All columns MUST have a valid value before a row can be activated. | ||||
| NhwY1731StatisticObject | 1.3.6.1.4.1.2011.5.25.136.1.8.2 | |||
| ThwY1731ResetStatisticTable | 1.3.6.1.4.1.2011.5.25.136.1.8.2.1 | NA | ||
table · not-accessible · current This table is used to reset statistic information. | ||||
| RhwY1731ResetStatisticEntry | 1.3.6.1.4.1.2011.5.25.136.1.8.2.1.1 | NA | ||
row · not-accessible · current The entry of reset statistic information. | ||||
| ChwY1731ResetStatisticType | 1.3.6.1.4.1.2011.5.25.136.1.8.2.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the type of reset. Options: 1. invalid(1) -indicates that the type of reset is invalid. 2. singleloss(2) -indicates that the type of reset is singleloss. 3. dualloss(3) -indicates that the type of reset is dualloss. 4. onewaydelay(4) -indicates that the type of reset is onewaydelay. 5. twowaydelay(5) -indicates that the type of reset is twowaydelay. The default value is invalid.
| ||||
| ChwY1731ResetStatistic8021pValue | 1.3.6.1.4.1.2011.5.25.136.1.8.2.1.1.2 | Integer32 (0 | 1..255) | RW | |
column · Integer32 (0 | 1..255) · read-write · current This object indicates the priority of 802.1p which in the ResetStatistic. The priority value ranges from 0 to 7. It maps a 8 bits number. 0 - 1 (0x01) 1 - 2 (0x02) 2 - 4 (0x04) 3 - 8 (0x08) 4 - 16 (0x10) 5 - 32 (0x20) 6 - 64 (0x40) 7 - 128(0x80) For example, if 802.1p priority is 0 , 4 , 7, the value is 145(1 + 16 + 128). The value 0 indicates that the priority is not set. | ||||
| ThwY1731StatisticTable | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2 | NA | ||
table · not-accessible · current This table is used to store the result about Y1731 statistic information. | ||||
| RhwY1731StatisticEntry | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1 | NA | ||
row · not-accessible · current An entry in the table, containing information on the Y1731 statistic entity. | ||||
| ChwY1731SingleLossStatisticGatherInterval | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current This object identifies an interval for collecting packet loss statistics. Options: 1. invalid(1) -indicates that the interval for collecting packet loss statistics is invalid. 2. interval1000ms(2) -indicates that the interval for collecting packet loss statistics is 1000 ms. 3. interval10000ms(3) -indicates that the interval for collecting packet loss statistics is 10000 ms. 4. interval30000ms(4) -indicates that the interval for collecting packet loss statistics is 30000 ms.
| ||||
| ChwY1731SingleLossLocalStatistic | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.2 | OCTET STRING (SIZE (0..1024)) | RO | |
column · OCTET STRING (SIZE (0..1024)) · read-only · current This object identifies the packet loss statistics that are collected on a local end. | ||||
| ChwY1731SingleLossLocalRatio | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.3 | OCTET STRING (SIZE (0..1024)) | RO | |
column · OCTET STRING (SIZE (0..1024)) · read-only · current This object identifies the packet loss ratio that are collected on a local end. | ||||
| ChwY1731SingleLossLocalRatioMax | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current This object identifies the maximum value of packet loss ratio that are collected on a local end. | ||||
| ChwY1731SingleLossLocalRatioMin | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current This object identifies the minimum value of packet loss ratio that are collected on a local end. | ||||
| ChwY1731SingleLossLocalRatioAvg | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current This object identifies the average value of packet loss ratio that are collected on a local end. | ||||
| ChwY1731SingleLossRemoteStatistic | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.7 | OCTET STRING (SIZE (0..1024)) | RO | |
column · OCTET STRING (SIZE (0..1024)) · read-only · current This object identifies the packet loss statistics that are collected on a remote end. | ||||
| ChwY1731SingleLossRemoteRatio | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.8 | OCTET STRING (SIZE (0..1024)) | RO | |
column · OCTET STRING (SIZE (0..1024)) · read-only · current This object identifies the packet loss ratio that are collected on a remote end. | ||||
| ChwY1731SingleLossRemoteRatioMax | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current This object identifies the maximum value of packet loss ratio that are collected on a remote end. | ||||
| ChwY1731SingleLossRemoteRatioMin | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current This object identifies the minimum value of packet loss ratio that are collected on a remote end. | ||||
| ChwY1731SingleLossRemoteRatioAvg | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current This object identifies the average value of packet loss ratio that are collected on a remote end. | ||||
| ChwY1731OneDelayStatistic | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.12 | OCTET STRING (SIZE (0..1024)) | RO | |
column · OCTET STRING (SIZE (0..1024)) · read-only · current This object indicates the statistics about the one-way delay. | ||||
| ChwY1731OneDelayVariation | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.13 | OCTET STRING (SIZE (0..1024)) | RO | |
column · OCTET STRING (SIZE (0..1024)) · read-only · current This object indicates the variation about the one-way delay. After the device is enabled to receive packets, statistics collected for the first time are invalid, and the value of hwY1731OneDelayVariation is setted to 0. | ||||
| ChwY1731OneDelayMax | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.14 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object identifies the maximum variation of the one-way delay. | ||||
| ChwY1731OneDelayMin | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.15 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object identifies the minimum variation of the one-way delay. | ||||
| ChwY1731OneDelayAvg | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.16 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object identifies the average variation of the one-way delay. | ||||
| ChwY1731TwoDelayStatistic | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.17 | OCTET STRING (SIZE (0..1024)) | RO | |
column · OCTET STRING (SIZE (0..1024)) · read-only · current This object indicates the statistics about the two-way delay. | ||||
| ChwY1731TwoDelayVariation | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.18 | OCTET STRING (SIZE (0..1024)) | RO | |
column · OCTET STRING (SIZE (0..1024)) · read-only · current This object indicates the variation about the two-way delay. | ||||
| ChwY1731TwoDelayMax | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.19 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object identifies the maximum variation of the two-way delay. | ||||
| ChwY1731TwoDelayMin | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.20 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object identifies the minimum variation of the two-way delay. | ||||
| ChwY1731TwoDelayAvg | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.21 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object identifies the average variation of the two-way delay. | ||||
| ChwY1731SingleLossLocalMax | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.22 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object identifies the maximum value of packet loss that are collected on a local end. | ||||
| ChwY1731SingleLossLocalMin | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.23 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object identifies the minimum value of packet loss that are collected on a local end. | ||||
| ChwY1731SingleLossLocalAvg | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.24 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object identifies the average value of packet loss that are collected on a local end. | ||||
| ChwY1731SingleLossRemoteMax | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.25 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object identifies the maximum value of packet loss that are collected on a remote end. | ||||
| ChwY1731SingleLossRemoteMin | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.26 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object identifies the minimum value of packet loss that are collected on a remote end. | ||||
| ChwY1731SingleLossRemoteAvg | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.27 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object identifies the average value of packet loss that are collected on a remote end. | ||||
| ChwY1731OneDelayStatisticMax | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.28 | Integer32 | RO | |
column · Integer32 · read-only · current This object identifies the maximum value of the one-way delay. | ||||
| ChwY1731OneDelayStatisticMin | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.29 | Integer32 | RO | |
column · Integer32 · read-only · current This object identifies the minimum value of the one-way delay. | ||||
| ChwY1731OneDelayStatisticAvg | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.30 | Integer32 | RO | |
column · Integer32 · read-only · current This object identifies the average value of the one-way delay. | ||||
| ChwY1731TwoDelayStatisticMax | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.31 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object identifies the maximum value of the two-way delay. | ||||
| ChwY1731TwoDelayStatisticMin | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.32 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object identifies the minimum value of the two-way delay. | ||||
| ChwY1731TwoDelayStatisticAvg | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.33 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object identifies the average value of the two-way delay. | ||||
| ChwY1731TwoDelayUnresponsivePacketCount | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.34 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object identifies the number of unresponsive Delay Measurement Reply frames. | ||||
| ChwY1731SingleLossStatistic8021pValue | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.35 | Integer32 (0..7 | 255) | RO | |
column · Integer32 (0..7 | 255) · read-only · current This object indicates the 802.1p priority. The value 255 is an invalid value. | ||||
| ChwY1731OneDelayStatistic8021pValue | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.36 | Integer32 (0..7 | 255) | RO | |
column · Integer32 (0..7 | 255) · read-only · current This object indicates the 802.1p priority. The value 255 is an invalid value. | ||||
| ChwY1731TwoDelayStatistic8021pValue | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.37 | Integer32 (0..7 | 255) | RO | |
column · Integer32 (0..7 | 255) · read-only · current This object indicates the 802.1p priority. The value 255 is an invalid value. | ||||
| ChwY1731OneDelayOnDemandStartTime | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.38 | DateAndTime | RO | |
column · DateAndTime · read-only · current The date and time of the one-way delay on-demand data. | ||||
| ChwY1731TwoDelayOnDemandStartTime | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.39 | DateAndTime | RO | |
column · DateAndTime · read-only · current The date and time of the two-way delay on-demand data. | ||||
| ChwY1731SingleLossOnDemandStartTime | 1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.40 | DateAndTime | RO | |
column · DateAndTime · read-only · current The date and time of the single-loss on-demand data. | ||||
| ThwCfmVlanOneDelayTrapLogTable | 1.3.6.1.4.1.2011.5.25.136.1.8.2.3 | NA | ||
table · not-accessible · current This table is used to query whether the one-way delay exceeds the trap threshold in the VLAN scenario. | ||||
| RhwCfmVlanOneDelayTrapLogEntry | 1.3.6.1.4.1.2011.5.25.136.1.8.2.3.1 | NA | ||
row · not-accessible · current An entry in the table, containing information on the trap entity. | ||||
| ChwCfmOneDelayTrapLogMacAddress | 1.3.6.1.4.1.2011.5.25.136.1.8.2.3.1.1 | MacAddress | AN | |
column · MacAddress · accessible-for-notify · current This object indicates the remote MAC address. | ||||
| ChwCfmVlanOneDelayTrapLogTimestamp | 1.3.6.1.4.1.2011.5.25.136.1.8.2.3.1.2 | TimeStamp | AN | |
column · TimeStamp · accessible-for-notify · current This object indicates the timestamp when the delay of the one-way ETH-DM in the VLAN is higher than the configured trap threshold. | ||||
| ChwCfmVlanOneDelayTrapLogDelayValue | 1.3.6.1.4.1.2011.5.25.136.1.8.2.3.1.3 | Unsigned32 | AN | |
column · Unsigned32 · accessible-for-notify · current This object indicates the delay value when the delay of the one-way ETH-DM in the VLAN is higher than the configured trap threshold. | ||||
| ChwCfmVlanOneDelayTrapLogThreshold | 1.3.6.1.4.1.2011.5.25.136.1.8.2.3.1.4 | Unsigned32 | AN | |
column · Unsigned32 · accessible-for-notify · current This object indicates the delay trap threshold of the one-way ETH-DM. | ||||
| ChwCfmVlanOneDelayTrapLogDelayValueHigh | 1.3.6.1.4.1.2011.5.25.136.1.8.2.3.1.5 | Unsigned32 | AN | |
column · Unsigned32 · accessible-for-notify · current This object indicates the high 32 bits delay value when the delay of the one-way ETH-DM in the VLAN is higher than the configured trap threshold. | ||||
| ChwCfmVlanOneDelayTrapLogDelayValueLow | 1.3.6.1.4.1.2011.5.25.136.1.8.2.3.1.6 | Unsigned32 | AN | |
column · Unsigned32 · accessible-for-notify · current This object indicates the low 32 bits delay value when the delay of the one-way ETH-DM in the VLAN is higher than the configured trap threshold. | ||||
| ThwCfmVlanOneDelayRcoverTrapLogTable | 1.3.6.1.4.1.2011.5.25.136.1.8.2.4 | NA | ||
table · not-accessible · current This table is used to query whether the one-way delay falls below the trap threshold. | ||||
| RhwCfmVlanOneDelayRcoverTrapLogEntry | 1.3.6.1.4.1.2011.5.25.136.1.8.2.4.1 | NA | ||
row · not-accessible · current An entry in the table, containing information on the recovery trap entity. | ||||
| ChwCfmOneDelayRecoveryTrapMacAddress | 1.3.6.1.4.1.2011.5.25.136.1.8.2.4.1.1 | MacAddress | AN | |
column · MacAddress · accessible-for-notify · current This object indicates the remote MAC address. | ||||
| ChwCfmVlanOneDelayRecoveryTrapLogTimestamp | 1.3.6.1.4.1.2011.5.25.136.1.8.2.4.1.2 | TimeStamp | AN | |
column · TimeStamp · accessible-for-notify · current This object indicates the timestamp when the delay of the one-way ETH-DM in the VLAN is lower than the configured trap threshold. | ||||
| ChwCfmVlanOneDelayRecoveryTrapLogDelayValue | 1.3.6.1.4.1.2011.5.25.136.1.8.2.4.1.3 | Unsigned32 | AN | |
column · Unsigned32 · accessible-for-notify · current This object indicates the delay value when the delay of the one-way ETH-DM in the VLAN is lower than the configured trap threshold. | ||||
| ChwCfmVlanOneDelayRecoveryTrapLogThreshold | 1.3.6.1.4.1.2011.5.25.136.1.8.2.4.1.4 | Unsigned32 | AN | |
column · Unsigned32 · accessible-for-notify · current This object indicates the delay trap threshold of the one-way ETH-DM. | ||||
| ChwCfmVlanOneDelayRecoveryTrapLogDelayValueHigh | 1.3.6.1.4.1.2011.5.25.136.1.8.2.4.1.5 | Unsigned32 | AN | |
column · Unsigned32 · accessible-for-notify · current This object indicates the high 32 bits delay value when the delay of the one-way ETH-DM in the VLAN is lower than the configured trap threshold. | ||||
| ChwCfmVlanOneDelayRecoveryTrapLogDelayValueLow | 1.3.6.1.4.1.2011.5.25.136.1.8.2.4.1.6 | Unsigned32 | AN | |
column · Unsigned32 · accessible-for-notify · current This object indicates the low 32 bits delay value when the delay of the one-way ETH-DM in the VLAN is lower than the configured trap threshold. | ||||
| ThwCfmVlanTwoDelayTrapLogTable | 1.3.6.1.4.1.2011.5.25.136.1.8.2.5 | NA | ||
table · not-accessible · current This table is used to query whether the two-way delay exceeds the trap threshold in the VLAN scenario. | ||||
| RhwCfmVlanTwoDelayTrapLogEntry | 1.3.6.1.4.1.2011.5.25.136.1.8.2.5.1 | NA | ||
row · not-accessible · current An entry in the table, containing information on the trap entity. | ||||
| ChwCfmTwoDelayTrapMacAddress | 1.3.6.1.4.1.2011.5.25.136.1.8.2.5.1.1 | MacAddress | AN | |
column · MacAddress · accessible-for-notify · current This object indicates the remote MAC address. | ||||
| ChwCfmVlanTwoDelayTrapLogTimestamp | 1.3.6.1.4.1.2011.5.25.136.1.8.2.5.1.2 | TimeStamp | AN | |
column · TimeStamp · accessible-for-notify · current This object indicates the timestamp when the delay of the two-way ETH-DM in the VLAN is higher than the configured trap threshold. | ||||
| ChwCfmVlanTwoDelayTrapLogDelayValue | 1.3.6.1.4.1.2011.5.25.136.1.8.2.5.1.3 | Unsigned32 | AN | |
column · Unsigned32 · accessible-for-notify · current This object indicates the delay value when the delay of the two-way ETH-DM in the VLAN is higher than the configured trap threshold. | ||||
| ChwCfmVlanTwoDelayTrapLogThreshold | 1.3.6.1.4.1.2011.5.25.136.1.8.2.5.1.4 | Unsigned32 | AN | |
column · Unsigned32 · accessible-for-notify · current This object indicates the delay trap threshold of the two-way ETH-DM. | ||||
| ChwCfmVlanTwoDelayTrapLogDelayValueHigh | 1.3.6.1.4.1.2011.5.25.136.1.8.2.5.1.5 | Unsigned32 | AN | |
column · Unsigned32 · accessible-for-notify · current This object indicates the high 32 bits delay value when the delay of the two-way ETH-DM in the VLAN is higher than the configured trap threshold. | ||||
| ChwCfmVlanTwoDelayTrapLogDelayValueLow | 1.3.6.1.4.1.2011.5.25.136.1.8.2.5.1.6 | Unsigned32 | AN | |
column · Unsigned32 · accessible-for-notify · current This object indicates the low 32 bits delay value when the delay of the two-way ETH-DM in the VLAN is higher than the configured trap threshold. | ||||
| ThwCfmVlanTwoDelayRcoverTrapLogTable | 1.3.6.1.4.1.2011.5.25.136.1.8.2.6 | NA | ||
table · not-accessible · current This table is used to query whether the two-way delay falls below the trap threshold. | ||||
| RhwCfmVlanTwoDelayRcoverTrapLogEntry | 1.3.6.1.4.1.2011.5.25.136.1.8.2.6.1 | NA | ||
row · not-accessible · current An entry in the table, containing information on the recovery trap entity. | ||||
| ChwCfmTwoDelayRecoveryTrapMacAddress | 1.3.6.1.4.1.2011.5.25.136.1.8.2.6.1.1 | MacAddress | AN | |
column · MacAddress · accessible-for-notify · current This object indicates the remote MAC address. | ||||
| ChwCfmVlanTwoDelayRecoveryTrapLogTimestamp | 1.3.6.1.4.1.2011.5.25.136.1.8.2.6.1.2 | TimeStamp | AN | |
column · TimeStamp · accessible-for-notify · current This object indicates the timestamp when the delay of the two-way ETH-DM in the VLAN is lower than the configured trap threshold. | ||||
| ChwCfmVlanTwoDelayRecoveryTrapLogDelayValue | 1.3.6.1.4.1.2011.5.25.136.1.8.2.6.1.3 | Unsigned32 | AN | |
column · Unsigned32 · accessible-for-notify · current This object indicates the delay value when the delay of the two-way ETH-DM in the VLAN is lower than the configured trap threshold. | ||||
| ChwCfmVlanTwoDelayRecoveryTrapLogThreshold | 1.3.6.1.4.1.2011.5.25.136.1.8.2.6.1.4 | Unsigned32 | AN | |
column · Unsigned32 · accessible-for-notify · current This object indicates the delay trap threshold for the two-way ETH-DM. | ||||
| ChwCfmVlanTwoDelayRecoveryTrapLogDelayValueHigh | 1.3.6.1.4.1.2011.5.25.136.1.8.2.6.1.5 | Unsigned32 | AN | |
column · Unsigned32 · accessible-for-notify · current This object indicates the high 32 bits delay value when the delay of the two-way ETH-DM in the VLAN is lower than the configured trap threshold. | ||||
| ChwCfmVlanTwoDelayRecoveryTrapLogDelayValueLow | 1.3.6.1.4.1.2011.5.25.136.1.8.2.6.1.6 | Unsigned32 | AN | |
column · Unsigned32 · accessible-for-notify · current This object indicates the low 32 bits delay value when the delay of the two-way ETH-DM in the VLAN is lower than the configured trap threshold. | ||||
| ThwY1731StatisticTrapLogTable | 1.3.6.1.4.1.2011.5.25.136.1.8.2.7 | NA | ||
table · not-accessible · current This table is used to query whether the Y.1731 statistic value triggers alarm. | ||||
| RhwY1731StatisticTrapLogEntry | 1.3.6.1.4.1.2011.5.25.136.1.8.2.7.1 | NA | ||
row · not-accessible · current An entry in the table, containing information on the statistic trap entity. | ||||
| ChwY1731StatisticTrapLogType | 1.3.6.1.4.1.2011.5.25.136.1.8.2.7.1.1 | INTEGER | AN | |
column · INTEGER · accessible-for-notify · current Specific trap type. Options: 1. onedelay(1) -indicates the trap type is delay of one-way ETH-DM. 2. twodelay(2) -indicates the trap type is delay of two-way ETH-DM. 3. onedelayvariation(3) -indicates the trap type is delay variation of one-way ETH-DM. 4. twedelayvariation(4) -indicates the trap type is delay variation of two-way ETH-DM. 5. singlelosslocalratio(5) -indicates the trap type is local loss ratio of single-ended ETH-LM. 6. singlelossremoteratio(6) -indicates the trap type is remote loss ratio of single-ended ETH-LM. 7. duallosslocalratio(7) -indicates the trap type is local loss ratio of dual-ended ETH-LM. 8. duallossremoteratio(8) -indicates the trap type is remote loss ratio of dual-ended ETH-LM.
| ||||
| ChwY1731StatisticTrapLogMacAddress | 1.3.6.1.4.1.2011.5.25.136.1.8.2.7.1.2 | MacAddress | AN | |
column · MacAddress · accessible-for-notify · current This object indicates the remote MAC address. | ||||
| ChwY1731StatisticTrapLog8021pPriority | 1.3.6.1.4.1.2011.5.25.136.1.8.2.7.1.3 | Integer32 | AN | |
column · Integer32 · accessible-for-notify · current This object indicates the priority. The value can be 255 or ranges from 0 to 7. The value 255 is an invalid value. | ||||
| ChwY1731StatisticTrapLogValue | 1.3.6.1.4.1.2011.5.25.136.1.8.2.7.1.4 | Unsigned32 | AN | |
column · Unsigned32 · accessible-for-notify · current The value that cause the trap. | ||||
| ChwY1731StatisticTrapLogUpperLimitThreshold | 1.3.6.1.4.1.2011.5.25.136.1.8.2.7.1.5 | Unsigned32 | AN | |
column · Unsigned32 · accessible-for-notify · current The upper limit value of the threshold. | ||||
| ChwY1731StatisticTrapLogLowerLimitThreshold | 1.3.6.1.4.1.2011.5.25.136.1.8.2.7.1.6 | Unsigned32 | AN | |
column · Unsigned32 · accessible-for-notify · current The lower limit value of the threshold. | ||||
| ChwY1731StatisticTrapLogValueHigh | 1.3.6.1.4.1.2011.5.25.136.1.8.2.7.1.7 | Unsigned32 | AN | |
column · Unsigned32 · accessible-for-notify · current The value that cause the trap. | ||||
| ChwY1731StatisticTrapLogValueLow | 1.3.6.1.4.1.2011.5.25.136.1.8.2.7.1.8 | Unsigned32 | AN | |
column · Unsigned32 · accessible-for-notify · current The value that cause the trap. | ||||
| ThwY1731TestIdSingleLossStatTable | 1.3.6.1.4.1.2011.5.25.136.1.8.2.8 | NA | ||
table · not-accessible · current This table stores the result of single-ended ETH-LM. | ||||
| RhwY1731TestIdSingleLossStatEntry | 1.3.6.1.4.1.2011.5.25.136.1.8.2.8.1 | NA | ||
row · not-accessible · current An entry in the table, containing information about the result of single-ended ETH-LM. | ||||
| ChwY1731TestIdSingleLossSequence | 1.3.6.1.4.1.2011.5.25.136.1.8.2.8.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the sequence number of the single-ended ETH-LM result. | ||||
| ChwY1731TestIdSingleLossErrInfo | 1.3.6.1.4.1.2011.5.25.136.1.8.2.8.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the error information of the single-ended ETH-LM result. | ||||
| ChwY1731TestIdSingleLossLocal | 1.3.6.1.4.1.2011.5.25.136.1.8.2.8.1.3 | Counter64 | RO | |
column · Counter64 · read-only · current This object identifies the packet loss statistics that are collected on a local end. | ||||
| ChwY1731TestIdSingleLossLocalRatio | 1.3.6.1.4.1.2011.5.25.136.1.8.2.8.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object identifies the packet loss ratio that is collected on a local end. | ||||
| ChwY1731TestIdSingleLossRemote | 1.3.6.1.4.1.2011.5.25.136.1.8.2.8.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current This object identifies the packet loss statistics that are collected on a remote end. | ||||
| ChwY1731TestIdSingleLossRemoteRatio | 1.3.6.1.4.1.2011.5.25.136.1.8.2.8.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object identifies the packet loss ratio that is collected on a remote end. | ||||
| ChwY1731TestIdSingleLossOnDemandStartTime | 1.3.6.1.4.1.2011.5.25.136.1.8.2.8.1.7 | DateAndTime | RO | |
column · DateAndTime · read-only · current The date and time of the single-loss on-demand data. | ||||
| ThwY1731TestIdOneDelayStatTable | 1.3.6.1.4.1.2011.5.25.136.1.8.2.9 | NA | ||
table · not-accessible · current This table stores the result of one-way ETH-DM. | ||||
| RhwY1731TestIdOneDelayStatEntry | 1.3.6.1.4.1.2011.5.25.136.1.8.2.9.1 | NA | ||
row · not-accessible · current An entry in the table, containing information about the result of one-way ETH-DM. | ||||
| ChwY1731TestIdOneDelaySequence | 1.3.6.1.4.1.2011.5.25.136.1.8.2.9.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the sequence number of the one-way ETH-DM result. | ||||
| ChwY1731TestIdOneDelayErrInfo | 1.3.6.1.4.1.2011.5.25.136.1.8.2.9.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the error information about the one-way delay. | ||||
| ChwY1731TestIdOneDelay | 1.3.6.1.4.1.2011.5.25.136.1.8.2.9.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the statistics about the one-way delay. | ||||
| ChwY1731TestIdOneDelayVariation | 1.3.6.1.4.1.2011.5.25.136.1.8.2.9.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the variation about the one-way delay. After the device is enabled to receive packets, statistics collected for the first time are invalid, and the value is set to 0. | ||||
| ChwY1731TestIdOneDelayOnDemandStartTime | 1.3.6.1.4.1.2011.5.25.136.1.8.2.9.1.5 | DateAndTime | RO | |
column · DateAndTime · read-only · current The date and time of the one-way delay on-demand data. | ||||
| ThwY1731TestIdTwoDelayStatTable | 1.3.6.1.4.1.2011.5.25.136.1.8.2.10 | NA | ||
table · not-accessible · current This table stores the result of two-way ETH-DM. | ||||
| RhwY1731TestIdTwoDelayStatEntry | 1.3.6.1.4.1.2011.5.25.136.1.8.2.10.1 | NA | ||
row · not-accessible · current An entry in the table, containing information about the result of two-way ETH-DM. | ||||
| ChwY1731TestIdTwoDelaySequence | 1.3.6.1.4.1.2011.5.25.136.1.8.2.10.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the sequence number of the two-way ETH-DM result. | ||||
| ChwY1731TestIdTwoDelayErrInfo | 1.3.6.1.4.1.2011.5.25.136.1.8.2.10.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the error information of the two-way ETH-DM result. | ||||
| ChwY1731TestIdTwoDelay | 1.3.6.1.4.1.2011.5.25.136.1.8.2.10.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the statistics about the two-way delay. | ||||
| ChwY1731TestIdTwoDelayVariation | 1.3.6.1.4.1.2011.5.25.136.1.8.2.10.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the variation about the two-way delay. After the device is enabled to receive packets, statistics collected for the first time are invalid, and the value is set to 0. | ||||
| ChwY1731TestIdTwoDelayOnDemandStartTime | 1.3.6.1.4.1.2011.5.25.136.1.8.2.10.1.5 | DateAndTime | RO | |
column · DateAndTime · read-only · current The date and time of the two-way delay on-demand data. | ||||
| ThwY1731TestIdStatisticResetTable | 1.3.6.1.4.1.2011.5.25.136.1.8.2.11 | NA | ||
table · not-accessible · current This table stores the result of two-way ETH-DM. | ||||
| RhwY1731TestIdStatisticResetEntry | 1.3.6.1.4.1.2011.5.25.136.1.8.2.11.1 | NA | ||
row · not-accessible · current An entry in the table, containing information about the result of two-way ETH-DM. | ||||
| ChwY1731TestIdResetStatisticType | 1.3.6.1.4.1.2011.5.25.136.1.8.2.11.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the type of reset. Options: 1. invalid(1) -indicates that the type of reset is invalid. 2. singleloss(2) -indicates that the type of reset is singleloss. 3. dualloss(3) -indicates that the type of reset is dualloss. 4. onewaydelay(4) -indicates that the type of reset is onewaydelay. 5. twowaydelay(5) -indicates that the type of reset is twowaydelay. 6. singlesynloss(6) -indicates that the type of reset is singlesynloss. The default value is invalid.
| ||||
| ThwY1731TestIdTwoDelaySummaryStatTable | 1.3.6.1.4.1.2011.5.25.136.1.8.2.12 | NA | ||
table · not-accessible · current This table stores the statistics of two-way ETH-DM collected during the last period. | ||||
| RhwY1731TestIdTwoDelaySummaryStatEntry | 1.3.6.1.4.1.2011.5.25.136.1.8.2.12.1 | NA | ||
row · not-accessible · current An entry in the table, containing information about the statistics of two-way ETH-DM collected during the last period. | ||||
| ChwY1731TestIdTwoDelayIndex | 1.3.6.1.4.1.2011.5.25.136.1.8.2.12.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current This object indicates the sequence number of statistics. In order to obtain the latest set of data, you can use this node is set to 4294967295 and perform a GET operation. | ||||
| ChwY1731TestIdTwoDelayNbrSamples | 1.3.6.1.4.1.2011.5.25.136.1.8.2.12.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the sample number of the two-way delay during the last period. | ||||
| ChwY1731TestIdTwoDelayMax | 1.3.6.1.4.1.2011.5.25.136.1.8.2.12.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the maximum value of the two-way delay collected during the last period. | ||||
| ChwY1731TestIdTwoDelayMin | 1.3.6.1.4.1.2011.5.25.136.1.8.2.12.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the minimum value of the two-way delay collected during the last period. | ||||
| ChwY1731TestIdTwoDelayAve | 1.3.6.1.4.1.2011.5.25.136.1.8.2.12.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the average value of the two-way delay collected during the last period. | ||||
| ChwY1731TestIdTwoDelayExceedUpLimitNum | 1.3.6.1.4.1.2011.5.25.136.1.8.2.12.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the num of two-way delay samples exceeded the upper limit value of the threshold during the last period. | ||||
| ChwY1731TestIdTwoDelayBelowLowLimitNum | 1.3.6.1.4.1.2011.5.25.136.1.8.2.12.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the num of two-way delay samples fell below lower limit value of the threshold during the last period. | ||||
| ChwY1731TestIdTwoDelayVariationNbrSamples | 1.3.6.1.4.1.2011.5.25.136.1.8.2.12.1.8 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the sample number of the two-way delay variation during the last period. | ||||
| ChwY1731TestIdTwoDelayVariationMax | 1.3.6.1.4.1.2011.5.25.136.1.8.2.12.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the maximum variation of the two-way delay variation collected during the last period. | ||||
| ChwY1731TestIdTwoDelayVariationMin | 1.3.6.1.4.1.2011.5.25.136.1.8.2.12.1.10 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the minimum variation of the two-way delay variation collected during the last period. | ||||
| ChwY1731TestIdTwoDelayVariationAve | 1.3.6.1.4.1.2011.5.25.136.1.8.2.12.1.11 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the average variation of the two-way delay variation collected during the last period. | ||||
| ChwY1731TestIdTwoDelayVarExceedUpLimitNum | 1.3.6.1.4.1.2011.5.25.136.1.8.2.12.1.12 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the num of two-way delay variation samples exceeded the upper limit value of the threshold during the last period. | ||||
| ChwY1731TestIdTwoDelayVarBelowLowLimitNum | 1.3.6.1.4.1.2011.5.25.136.1.8.2.12.1.13 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the num of two-way delay variation samples fell below lower limit value of the threshold during the last period. | ||||
| ChwY1731TestIdTwoDelayCurIndex | 1.3.6.1.4.1.2011.5.25.136.1.8.2.12.1.14 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the sequence number of the current statistics. | ||||
| ThwY1731TestIdSingleSynLossSummaryStatTable | 1.3.6.1.4.1.2011.5.25.136.1.8.2.13 | NA | ||
table · not-accessible · current This table stores the statistics of single-ended ETH-SLM collected during the last period. | ||||
| RhwY1731TestIdSingleSynLossSummaryStatEntry | 1.3.6.1.4.1.2011.5.25.136.1.8.2.13.1 | NA | ||
row · not-accessible · current An entry in the table, containing information about the statistics of single-ended ETH-SLM collected during the last period. | ||||
| ChwY1731TestIdSingleSynLossIndex | 1.3.6.1.4.1.2011.5.25.136.1.8.2.13.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current This object indicates the sequence number of statistics. In order to obtain the latest set of data, you can use this node is set to 4294967295 and perform a GET operation. | ||||
| ChwY1731TestIdSingleSynLossNbrSamples | 1.3.6.1.4.1.2011.5.25.136.1.8.2.13.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the sample number of the single-ended ETH-SLM result during the last period. | ||||
| ChwY1731TestIdSingleSynSendRemote | 1.3.6.1.4.1.2011.5.25.136.1.8.2.13.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the packet send statistics that are collected on a remote end during the last period. | ||||
| ChwY1731TestIdSingleSynRecvLocal | 1.3.6.1.4.1.2011.5.25.136.1.8.2.13.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the packet receive statistics that are collected on a local end during the last period. | ||||
| ChwY1731TestIdSingleSynLossLocal | 1.3.6.1.4.1.2011.5.25.136.1.8.2.13.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the packet loss statistics that are collected on a local end during the last period. | ||||
| ChwY1731TestIdSingleSynExceedLocalUpLimitNum | 1.3.6.1.4.1.2011.5.25.136.1.8.2.13.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the number of local loss ratio samples exceeded the upper limit value of the threshold during the last period. | ||||
| ChwY1731TestIdSingleSynBelowLocalLowLimitNum | 1.3.6.1.4.1.2011.5.25.136.1.8.2.13.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the number of local loss ratio samples fell below lower limit value of the threshold during the last period. | ||||
| ChwY1731TestIdSingleSynSendLocal | 1.3.6.1.4.1.2011.5.25.136.1.8.2.13.1.8 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the packet send statistics that are collected on a local end during the last period. | ||||
| ChwY1731TestIdSingleSynRecvRemote | 1.3.6.1.4.1.2011.5.25.136.1.8.2.13.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the packet receive statistics that are collected on a remote end during the last period. | ||||
| ChwY1731TestIdSingleSynLossRemote | 1.3.6.1.4.1.2011.5.25.136.1.8.2.13.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the packet loss statistics that are collected on a remote end during the last period. | ||||
| ChwY1731TestIdSingleSynExceedRemoteUpLimitNum | 1.3.6.1.4.1.2011.5.25.136.1.8.2.13.1.11 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the number of remote loss ratio samples exceeded the upper limit value of the threshold during the last period. | ||||
| ChwY1731TestIdSingleSynBelowRemoteLowLimitNum | 1.3.6.1.4.1.2011.5.25.136.1.8.2.13.1.12 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the number of remote loss ratio samples fell below lower limit value of the threshold during the last period. | ||||
| ChwY1731TestIdSingleSynLossCurIndex | 1.3.6.1.4.1.2011.5.25.136.1.8.2.13.1.13 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the sequence number of the current statistics. | ||||
| ThwY1731SingleLossSummaryStatTable | 1.3.6.1.4.1.2011.5.25.136.1.8.2.14 | NA | ||
table · not-accessible · current This table stores the statistics of single-ended ETH-LM collected during the last period. | ||||
| RhwY1731SingleLossSummaryStatEntry | 1.3.6.1.4.1.2011.5.25.136.1.8.2.14.1 | NA | ||
row · not-accessible · current An entry in the table, containing information about the statistics of single-ended ETH-LM collected during the last period. | ||||
| ChwY1731SingleLossIndex | 1.3.6.1.4.1.2011.5.25.136.1.8.2.14.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current This object indicates the sequence number of statistics. In order to obtain the latest set of data, you can use this node is set to 4294967295 and perform a GET operation. | ||||
| ChwY1731SingleLossNbrSamples | 1.3.6.1.4.1.2011.5.25.136.1.8.2.14.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the sample number of the single-ended ETH-SLM result during the last period. | ||||
| ChwY1731SingleLossSendRemote | 1.3.6.1.4.1.2011.5.25.136.1.8.2.14.1.3 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the packet send statistics that are collected on a remote end during the last period. | ||||
| ChwY1731SingleLossRecvLocal | 1.3.6.1.4.1.2011.5.25.136.1.8.2.14.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the packet receive statistics that are collected on a local end during the last period. | ||||
| ChwY1731SingleLossLossLocal | 1.3.6.1.4.1.2011.5.25.136.1.8.2.14.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the packet loss statistics that are collected on a local end during the last period. | ||||
| ChwY1731SingleLossExceedLocalUpLimitNum | 1.3.6.1.4.1.2011.5.25.136.1.8.2.14.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the number of local loss ratio samples exceeded the upper limit value of the threshold during the last period. | ||||
| ChwY1731SingleLossBelowLocallowLimitNum | 1.3.6.1.4.1.2011.5.25.136.1.8.2.14.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the number of local loss ratio samples fell below lower limit value of the threshold during the last period. | ||||
| ChwY1731SingleLossSendLocal | 1.3.6.1.4.1.2011.5.25.136.1.8.2.14.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the packet send statistics that are collected on a local end during the last period. | ||||
| ChwY1731SingleLossRecvRemote | 1.3.6.1.4.1.2011.5.25.136.1.8.2.14.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the packet receive statistics that are collected on a remote end during the last period. | ||||
| ChwY1731SingleLossLossRemote | 1.3.6.1.4.1.2011.5.25.136.1.8.2.14.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the packet loss statistics that are collected on a remote end during the last period. | ||||
| ChwY1731SingleLossExceedRemoteUpLimitNum | 1.3.6.1.4.1.2011.5.25.136.1.8.2.14.1.11 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the number of remote loss ratio samples exceeded the upper limit value of the threshold during the last period. | ||||
| ChwY1731SingleLossBelowRemotelowLimitNum | 1.3.6.1.4.1.2011.5.25.136.1.8.2.14.1.12 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the number of remote loss ratio samples fell below lower limit value of the threshold during the last period. | ||||
| ChwY1731SingleLossCurIndex | 1.3.6.1.4.1.2011.5.25.136.1.8.2.14.1.13 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the sequence number of the current statistics. | ||||
| ThwY1731TestIdSingleLossSummaryStatTable | 1.3.6.1.4.1.2011.5.25.136.1.8.2.15 | NA | ||
table · not-accessible · current This table stores the statistics of single-ended ETH-LM collected during the last period with testid. | ||||
| RhwY1731TestIdSingleLossSummaryStatEntry | 1.3.6.1.4.1.2011.5.25.136.1.8.2.15.1 | NA | ||
row · not-accessible · current An entry in the table, containing information about the statistics of single-ended ETH-LM collected during the last period with testid. | ||||
| ChwY1731TestIdSingleLossIndex | 1.3.6.1.4.1.2011.5.25.136.1.8.2.15.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current This object indicates the sequence number of statistics. In order to obtain the latest set of data, you can use this node is set to 4294967295 and perform a GET operation. | ||||
| ChwY1731TestIdSingleLossNbrSamples | 1.3.6.1.4.1.2011.5.25.136.1.8.2.15.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the sample number of the single-ended ETH-SLM result during the last period. | ||||
| ChwY1731TestIdSingleLossSendRemote | 1.3.6.1.4.1.2011.5.25.136.1.8.2.15.1.3 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the packet send statistics that are collected on a remote end during the last period. | ||||
| ChwY1731TestIdSingleLossRecvLocal | 1.3.6.1.4.1.2011.5.25.136.1.8.2.15.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the packet receive statistics that are collected on a local end during the last period. | ||||
| ChwY1731TestIdSingleLossLossLocal | 1.3.6.1.4.1.2011.5.25.136.1.8.2.15.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the packet loss statistics that are collected on a local end during the last period. | ||||
| ChwY1731TestIdSingleLossExceedLocalUpLimitNum | 1.3.6.1.4.1.2011.5.25.136.1.8.2.15.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the number of local loss ratio samples exceeded the upper limit value of the threshold during the last period. | ||||
| ChwY1731TestIdSingleLossBelowLocallowLimitNum | 1.3.6.1.4.1.2011.5.25.136.1.8.2.15.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the number of local loss ratio samples fell below lower limit value of the threshold during the last period. | ||||
| ChwY1731TestIdSingleLossSendLocal | 1.3.6.1.4.1.2011.5.25.136.1.8.2.15.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the packet send statistics that are collected on a local end during the last period. | ||||
| ChwY1731TestIdSingleLossRecvRemote | 1.3.6.1.4.1.2011.5.25.136.1.8.2.15.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the packet receive statistics that are collected on a remote end during the last period. | ||||
| ChwY1731TestIdSingleLossLossRemote | 1.3.6.1.4.1.2011.5.25.136.1.8.2.15.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the packet loss statistics that are collected on a remote end during the last period. | ||||
| ChwY1731TestIdSingleLossExceedRemoteUpLimitNum | 1.3.6.1.4.1.2011.5.25.136.1.8.2.15.1.11 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the number of remote loss ratio samples exceeded the upper limit value of the threshold during the last period. | ||||
| ChwY1731TestIdSingleLossBelowRemotelowLimitNum | 1.3.6.1.4.1.2011.5.25.136.1.8.2.15.1.12 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the number of remote loss ratio samples fell below lower limit value of the threshold during the last period. | ||||
| ChwY1731TestIdSingleLossCurIndex | 1.3.6.1.4.1.2011.5.25.136.1.8.2.15.1.13 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the sequence number of the current statistics. | ||||
| ThwY1731TestIdSingleSynLossStatTable | 1.3.6.1.4.1.2011.5.25.136.1.8.2.16 | NA | ||
table · not-accessible · current This table stores the result of single-ended ETH-SLM. | ||||
| RhwY1731TestIdSingleSynLossStatEntry | 1.3.6.1.4.1.2011.5.25.136.1.8.2.16.1 | NA | ||
row · not-accessible · current An entry in the table, containing information about the result of single-ended ETH-SLM. | ||||
| ChwY1731TestIdSingleSynLossSequence | 1.3.6.1.4.1.2011.5.25.136.1.8.2.16.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current This object indicates the sequence number of the single-ended ETH-SLM result. | ||||
| ChwY1731TestIdSingleSynLossErrInfo | 1.3.6.1.4.1.2011.5.25.136.1.8.2.16.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the error information of the single-ended ETH-SLM result. | ||||
| ChwY1731TestIdSingleSynLossLocalSend | 1.3.6.1.4.1.2011.5.25.136.1.8.2.16.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the number of local send packets about single-synthetic frame loss. | ||||
| ChwY1731TestIdSingleSynLossRemoteSend | 1.3.6.1.4.1.2011.5.25.136.1.8.2.16.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the number of remote send packets about single-synthetic frame loss. | ||||
| ChwY1731TestIdSingleSynLossLocalReceive | 1.3.6.1.4.1.2011.5.25.136.1.8.2.16.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the number of local receive packets about single-synthetic frame loss | ||||
| ChwY1731TestIdSingleSynLossUnack | 1.3.6.1.4.1.2011.5.25.136.1.8.2.16.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the number of local unanswered packets about single-synthetic frame loss. | ||||
| ChwY1731TestIdSingleSynLossLossLocal | 1.3.6.1.4.1.2011.5.25.136.1.8.2.16.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current This object identifies the packet loss statistics that are collected on a local end. | ||||
| ChwY1731TestIdSingleSynLossLocalRatio | 1.3.6.1.4.1.2011.5.25.136.1.8.2.16.1.8 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object identifies the packet loss ratio that is collected on a local end. | ||||
| ChwY1731TestIdSingleSynLossLossRemote | 1.3.6.1.4.1.2011.5.25.136.1.8.2.16.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current This object identifies the packet loss statistics that are collected on a remote end. | ||||
| ChwY1731TestIdSingleSynLossRemoteRatio | 1.3.6.1.4.1.2011.5.25.136.1.8.2.16.1.10 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object identifies the packet loss ratio that is collected on a remote end. | ||||
| ChwY1731TestIdSingleSynLossOnDemandStartTime | 1.3.6.1.4.1.2011.5.25.136.1.8.2.16.1.11 | DateAndTime | RO | |
column · DateAndTime · read-only · current The date and time of the single-synthetic loss on-demand data. | ||||
| ThwY1731TestIdStatTrapLogTable | 1.3.6.1.4.1.2011.5.25.136.1.8.2.17 | NA | ||
table · not-accessible · current This table is used to query whether the Y.1731 statistic value triggers alarm. | ||||
| RhwY1731TestIdStatTrapLogEntry | 1.3.6.1.4.1.2011.5.25.136.1.8.2.17.1 | NA | ||
row · not-accessible · current An entry in the table, containing information on the statistic trap entity. | ||||
| ChwY1731TestIdStatTrapLogType | 1.3.6.1.4.1.2011.5.25.136.1.8.2.17.1.1 | INTEGER | AN | |
column · INTEGER · accessible-for-notify · current Specific trap type. Options: 1. onedelay(1) -indicates the trap type is delay of one-way ETH-DM. 2. onedelayvariation(2) -indicates the trap type is delay variation of one-way ETH-DM. 3. twodelay(3) -indicates the trap type is delay of two-way ETH-DM. 4. twodelayvariation(4) -indicates the trap type is delay variation of two-way ETH-DM. 5. singlelossremoteratio(5) -indicates the trap type is remote loss ratio of single-ended ETH-LM. 6. singlelosslocalratio(6) -indicates the trap type is local loss ratio of single-ended ETH-LM. 7. singlesyntheticlossremoteratio(7) -indicates the trap type is remote loss ratio of single-ended-synthetic ETH-LM. 8. singlesyntheticlosslocalratio(8) -indicates the trap type is local loss ratio of single-ended-synthetic ETH-LM.
| ||||
| ChwY1731TestIdStatTrapLogValue | 1.3.6.1.4.1.2011.5.25.136.1.8.2.17.1.2 | Unsigned32 | AN | |
column · Unsigned32 · accessible-for-notify · current The value that cause the trap. | ||||
| ChwY1731TestIdStatTrapLogUpperLimitThreshold | 1.3.6.1.4.1.2011.5.25.136.1.8.2.17.1.3 | Unsigned32 | AN | |
column · Unsigned32 · accessible-for-notify · current The upper limit value of the threshold. | ||||
| ChwY1731TestIdStatTrapLogLowerLimitThreshold | 1.3.6.1.4.1.2011.5.25.136.1.8.2.17.1.4 | Unsigned32 | AN | |
column · Unsigned32 · accessible-for-notify · current The lower limit value of the threshold. | ||||
| ChwY1731TestIdStatTrapLogTypeString | 1.3.6.1.4.1.2011.5.25.136.1.8.2.17.1.5 | OCTET STRING | AN | |
column · OCTET STRING · accessible-for-notify · current This object indicates the name of the cause of the trap. | ||||
| ShwY1731AisMaxPktNum | 1.3.6.1.4.1.2011.5.25.136.1.8.3 | Unsigned32 | AN | |
scalar · Unsigned32 · accessible-for-notify · current The MAXIMUM of AIS packets transmitted in one second. | ||||
| ShwY1731PMModeEnable | 1.3.6.1.4.1.2011.5.25.136.1.8.4 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current This object indicates whether the y1731 summary statistic data is managed by Performace(PM) module, If it is enabled(1), the y1731 summary statistic data is managed, saved ane sent to NMS by Performace(PM) module. The default value is disabled(2). | ||||
| NhwY1731GlobalObject | 1.3.6.1.4.1.2011.5.25.136.1.8.5 | |||
| ShwY1731MaxTestId | 1.3.6.1.4.1.2011.5.25.136.1.8.5.1 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current This object indicates the maximum value of TestId in current configuration. The value can be 0 or rangs from 1 to 4294967295. The value 0 is an invalid value. | ||||
| ShwY1731LckMaxPktNum | 1.3.6.1.4.1.2011.5.25.136.1.8.5.2 | Unsigned32 | AN | |
scalar · Unsigned32 · accessible-for-notify · current The max LCK packets transmitted or received in 1 second. | ||||
| ShwY1731LckCurrentPktNum | 1.3.6.1.4.1.2011.5.25.136.1.8.5.3 | Unsigned32 | AN | |
scalar · Unsigned32 · accessible-for-notify · current The current LCK packets transmitting or receiving. | ||||
| ShwY1731LckUpperThreshold | 1.3.6.1.4.1.2011.5.25.136.1.8.5.4 | Unsigned32 | AN | |
scalar · Unsigned32 · accessible-for-notify · current The object is used to set the upper threshold value of LCK packets. The value range is from 1 to 100. The default means 80. | ||||
| ShwY1731LckLowerThreshold | 1.3.6.1.4.1.2011.5.25.136.1.8.5.5 | Unsigned32 | AN | |
scalar · Unsigned32 · accessible-for-notify · current The object is used to set the lower threshold value of LCK packets. The value range is from 1 to 100. The default means 70. | ||||
Textual conventions
HWDetectTypeINTEGERfastDetect(2)normalDetect(1)Detect the mode type: Fast detect and standard detect
HWDot1agCfmEgressActionFieldValueINTEGERegrBlocked(3)egrDown(2)egrInvalid(255)egrOK(1)egrVid(4)Possible values returned in the egress action field
HWDot1agCfmHighestDefectPriINTEGERdefErrorCCM(4)defMACstatus(2)defRDICCM(1)defRemoteCCM(3)defXconCCM(5)none(0)An enumerated value, equal to the contents of the variable highestDefect (20.33.9 and Table 20-1), indicating the highest-priority defect that has been present since the MEP Fault Notification Generator State Machine was last in the FNG_RESET state, either: none(0) no defects since FNG_RESET defRDICCM(1) DefRDICCM defMACstatus(2) DefMACstatus defRemoteCCM(3) DefRemoteCCM defErrorCCM(4) DefErrorCCM defXconCCM(5) DefXconCCM The value 0 is used for no defects so that additional higher priority values can be added, if needed, at a later time, and so that these values correspond with those in Dot1agCfmLowestAlarmPri.
HWDot1agCfmIngressActionFieldValueINTEGERingBlocked(3)ingDown(2)ingInvalid(255)ingOk(1)ingVid(4)Possible values returned in the ingress action field.
HWDot1agCfmMDLevelInteger32 (0..7)Display hint:
dInteger identifying the Maintenance Domain Level (MD Level). Higher numbers correspond to higher Maintenance Domains, those with the greatest physical reach, with the highest values for customers' CFM PDUs. Lower numbers correspond to lower Maintenance Domains, those with more limited physical reach, with the lowest values for CFM PDUs protecting single bridges or physical links.
HWDot1agCfmRelayActionFieldValueINTEGERrlyFdb(2)rlyHit(1)rlyInvalid(255)rlyMpdb(3)Indicates the possible values the Relay action field can take.
HWDot3OuiOCTET STRING (SIZE (3))24-bit Organizationally Unique Identifier. Information on OUIs can be found in IEEE 802-2001 [802-2001] Clause 9.
HWTestMessageFinishedValueINTEGERfailed(4)finished(3)ready(1)stop(5)testing(2)The five values indicates: has not run/is running/the previous test terminates normally/the previous test terminates abnormally/the previous test is interrupted (through ctrl+c or mib)
HWTestMessageSendSpeedINTEGERfiveMbps(2)oneMbps(1)Transmission rate: 1Mbps and 5Mbps.
Traps / Notifications
- hwCfmVlanOnewayDelay
1.3.6.1.4.1.2011.5.25.136.1.6.23 - hwCfmVlanOnewayDelayRecovery
1.3.6.1.4.1.2011.5.25.136.1.6.24 - hwCfmVlanTwowayDelay
1.3.6.1.4.1.2011.5.25.136.1.6.25 - hwCfmVlanTwowayDelayRecovery
1.3.6.1.4.1.2011.5.25.136.1.6.26 - hwDot1agCfmExceptionalMACStatus
1.3.6.1.4.1.2011.5.25.136.1.6.44 - hwDot1agCfmExceptionalMACStatusCleared
1.3.6.1.4.1.2011.5.25.136.1.6.45 - hwDot1agCfmFaultAlarm
1.3.6.1.4.1.2011.5.25.136.1.6.1 - hwDot1agCfmLOC
1.3.6.1.4.1.2011.5.25.136.1.6.42 - hwDot1agCfmLOCCleared
1.3.6.1.4.1.2011.5.25.136.1.6.43 - hwDot1agCfmMismerge
1.3.6.1.4.1.2011.5.25.136.1.6.34 - hwDot1agCfmMismergeCleared
1.3.6.1.4.1.2011.5.25.136.1.6.35 - hwDot1agCfmRDI
1.3.6.1.4.1.2011.5.25.136.1.6.46 - hwDot1agCfmRDICleared
1.3.6.1.4.1.2011.5.25.136.1.6.47 - hwDot1agCfmUnexpectedMAC
1.3.6.1.4.1.2011.5.25.136.1.6.40 - hwDot1agCfmUnexpectedMACCleared
1.3.6.1.4.1.2011.5.25.136.1.6.41 - hwDot1agCfmUnexpectedMEGLevel
1.3.6.1.4.1.2011.5.25.136.1.6.32 - hwDot1agCfmUnexpectedMEGLevelCleared
1.3.6.1.4.1.2011.5.25.136.1.6.33 - hwDot1agCfmUnexpectedMEP
1.3.6.1.4.1.2011.5.25.136.1.6.36 - hwDot1agCfmUnexpectedMEPCleared
1.3.6.1.4.1.2011.5.25.136.1.6.37 - hwDot1agCfmUnexpectedPeriod
1.3.6.1.4.1.2011.5.25.136.1.6.38 - hwDot1agCfmUnexpectedPeriodCleared
1.3.6.1.4.1.2011.5.25.136.1.6.39 - hwDot3ahEfmLoopbackFailed
1.3.6.1.4.1.2011.5.25.136.1.6.29 - hwDot3ahEfmNonThresholdEvent
1.3.6.1.4.1.2011.5.25.136.1.6.5 - hwDot3ahEfmNonThresholdRecovery
1.3.6.1.4.1.2011.5.25.136.1.6.17 - hwDot3ahEfmRemoteDyingGaspEvent
1.3.6.1.4.1.2011.5.25.136.1.6.8 - hwDot3ahEfmThresholdEvent
1.3.6.1.4.1.2011.5.25.136.1.6.4 - hwTestMessageCompleted
1.3.6.1.4.1.2011.5.25.136.1.6.3 - hwTestMessageFailed
1.3.6.1.4.1.2011.5.25.136.1.6.2 - hwY1731AisDefectAlarm
1.3.6.1.4.1.2011.5.25.136.1.6.30 - hwY1731AisDefectAlarmRecovery
1.3.6.1.4.1.2011.5.25.136.1.6.31 - hwY1731AisExceedMaxPktNum
1.3.6.1.4.1.2011.5.25.136.1.6.48 - hwY1731AisExceedMaxPktNumCleared
1.3.6.1.4.1.2011.5.25.136.1.6.49 - hwY1731LckDefect
1.3.6.1.4.1.2011.5.25.136.1.6.50 - hwY1731LckDefectCleared
1.3.6.1.4.1.2011.5.25.136.1.6.51 - hwY1731LckExceedThreshold
1.3.6.1.4.1.2011.5.25.136.1.6.54 - hwY1731LckExceedThresholdRecovery
1.3.6.1.4.1.2011.5.25.136.1.6.55 - hwY1731PwTrunkNonSupport
1.3.6.1.4.1.2011.5.25.136.1.6.60 - hwY1731PwTrunkNonSupportResumed
1.3.6.1.4.1.2011.5.25.136.1.6.61 - hwY1731Statistic
1.3.6.1.4.1.2011.5.25.136.1.6.52 - hwY1731StatisticClear
1.3.6.1.4.1.2011.5.25.136.1.6.53 - hwY1731TestIdStatistic
1.3.6.1.4.1.2011.5.25.136.1.6.58 - hwY1731TestIdStatisticClear
1.3.6.1.4.1.2011.5.25.136.1.6.59 - hwY1731TunnelNonSupport
1.3.6.1.4.1.2011.5.25.136.1.6.56 - hwY1731TunnelNonSupportResumed
1.3.6.1.4.1.2011.5.25.136.1.6.57
Groups and compliance
- hwDot1agCfmGroup
- hwDot1agCfmMPGroup
- hwDot1agCfmMaGroup
- hwDot1agCfmMacPingGroup
- hwDot1agCfmMacTraceGroup
- hwDot1agCfmMacTraceReplyGroup
- hwDot1agCfmMdGroup
- hwDot1agCfmMepGroup
- hwDot1agCfmMipGroup
- hwDot1agCfmQueryMaIndexGroup
- hwDot1agCfmQueryMdIndexGroup
- hwDot1agCfmRMepGroup
- hwDot3ahEfmControlGroup
- hwDot3ahEfmDetectModeGroup
- hwDot3ahEfmErrFrameEventGroup
- hwDot3ahEfmErrFramePeriodEventGroup
- hwDot3ahEfmErrFrameSecsSummaryEventGroup
- hwDot3ahEfmErrSymbolPeriodEventGroup
- hwDot3ahEfmEventLogGroup
- hwDot3ahEfmFlagEventGroup
- hwDot3ahEfmLoopbackGroup
- hwDot3ahEfmManagerGroup
- hwDot3ahEfmPeerGroup
- hwDot3ahEfmStatsBaseGroup
- hwDot3ahEvrrpGroup
- hwEthOamCompliance
- hwEthOamTrapsGroup
- hwTestMessageGroup
- hwTestMessageResultGroup
- hwY1731AisGroup
- hwY1731AisLinkStatusGroup
- hwY1731AisVlanConfigGroup
- hwY1731AisVlanGroup
- hwY1731BaseConfigGroup
- hwY1731ConfigGroup
- hwY1731ManagerGroup
- hwY1731MulPingGroup
- hwY1731MulPingReplyGroup
- hwY1731ResetStatisticGroup
- hwY1731SingleLossSummaryStatTableGroup
- hwY1731TestIdGroup
- hwY1731TestIdOneDelayStatTableGroup
- hwY1731TestIdOneWayDMReceiveGroup
- hwY1731TestIdOneWayDMSendGroup
- hwY1731TestIdSingleEndedLMReceiveGroup
- hwY1731TestIdSingleEndedLMSendGroup
- hwY1731TestIdSingleLossStatTableGroup
- hwY1731TestIdSingleLossSummaryStatTableGroup
- hwY1731TestIdSingleSynEndedLMReceiveTableGroup
- hwY1731TestIdSingleSynEndedLMSendTableGroup
- hwY1731TestIdSingleSynLossStatTableGroup
- hwY1731TestIdSingleSynLossSummaryStatTableGroup
- hwY1731TestIdStatisticResetTableGroup
- hwY1731TestIdTwoDelayStatTableGroup
- hwY1731TestIdTwoDelaySummaryStatTableGroup
- hwY1731TestIdTwoWayDMReceiveGroup
- hwY1731TestIdTwoWayDMSendGroup