HUAWEI-ERPS-MIB
HUAWEI Technology Co.,LtdThe private mib file includes the general extent information of the device.hwDatacomm(25).hwErpsMIB.
snmptranslate -m HUAWEI-ERPS-MIB -Tpsnmpwalk -v2c -c <community> -m HUAWEI-ERPS-MIB <host> 1.3.6.1.4.1.2011.5.25.256Imports
| HUAWEI-MIB | hwDatacomm |
|---|---|
| IF-MIB | InterfaceIndex, ifName |
| P-BRIDGE-MIB | EnabledStatus |
| Q-BRIDGE-MIB | VlanId |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IhwErpsMIB | 1.3.6.1.4.1.2011.5.25.256 | |||
identity The private mib file includes the general extent information of the device.hwDatacomm(25).hwErpsMIB. | ||||
| NhwErpsObjects | 1.3.6.1.4.1.2011.5.25.256.1 | |||
| ShwErpsGlobalResetRapsPktCnt | 1.3.6.1.4.1.2011.5.25.256.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Reset the RAPS packets counter of all running ERPS ports. The value is unused(65535) when it is read. And it must be clear(1) when it is set.
| ||||
| ThwErpsRingConfigTable | 1.3.6.1.4.1.2011.5.25.256.1.2 | NA | ||
table · not-accessible · current This table describes the ERPS ring configurations. | ||||
| RhwErpsRingConfigEntry | 1.3.6.1.4.1.2011.5.25.256.1.2.1 | NA | ||
row · not-accessible · current The table includes the configurtion of ERPS rings. The index of the table is ERPS ring id.
| ||||
| ChwConfigRingId | 1.3.6.1.4.1.2011.5.25.256.1.2.1.1 | Integer32 (1..255) | AN | |
column · Integer32 (1..255) · accessible-for-notify · current This object indicates the ring ID. | ||||
| ChwConfigRingRowStatus | 1.3.6.1.4.1.2011.5.25.256.1.2.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current Operation of CreateAndGo can be used to create a new ERPS ring, and operation of Destroy be used to destroy an existent ERPS ring. | ||||
| ChwConfigDescription | 1.3.6.1.4.1.2011.5.25.256.1.2.1.3 | DisplayString (SIZE (0..80)) | RC | |
column · DisplayString (SIZE (0..80)) · read-create · current This object indicates the ring description. The description can contain a maximum of 80 ASCII characters. | ||||
| ChwConfigControlVlanId | 1.3.6.1.4.1.2011.5.25.256.1.2.1.4 | Integer32 (0 | 1..4094) | RC | |
column · Integer32 (0 | 1..4094) · read-create · current This object indicates the control VLAN information of the ring. If the value of this object is set to 0, the configuration is deleted. | ||||
| ChwConfigProtectedInstanceList | 1.3.6.1.4.1.2011.5.25.256.1.2.1.5 | OCTET STRING (SIZE (0..512)) | RC | |
column · OCTET STRING (SIZE (0..512)) · read-create · current This object indicates the protection instance ID of the ring. | ||||
| ChwConfigWtrTimerSettingValue | 1.3.6.1.4.1.2011.5.25.256.1.2.1.6 | Integer32 (1..12) | RC | |
column · Integer32 (1..12) · read-create · current This object indicates the ring switchover protection time.
| ||||
| ChwConfigGuardTimerSettingValue | 1.3.6.1.4.1.2011.5.25.256.1.2.1.7 | Integer32 (1..200) | RC | |
column · Integer32 (1..200) · read-create · current This object indicates the interval for discarding RAPS packets.
| ||||
| ChwConfigHoldoffTimerSettingValue | 1.3.6.1.4.1.2011.5.25.256.1.2.1.8 | Integer32 (0..100) | RC | |
column · Integer32 (0..100) · read-create · current This object indicates the interval for keeping the interface status.
| ||||
| ChwConfigResetRapsPktCnt | 1.3.6.1.4.1.2011.5.25.256.1.2.1.9 | INTEGER | RC | |
column · INTEGER · read-create · current This object indicates resetting packet statistics on an interface. When the read operation is performed, the system returns 65535 (not used). When the set operation is performed, the value of this object must be set to 1 (cleared).
| ||||
| ChwConfigRapsMel | 1.3.6.1.4.1.2011.5.25.256.1.2.1.10 | Integer32 (0..7) | RC | |
column · Integer32 (0..7) · read-create · current This object indicates the maintenance entity level of the ring, providing a channel to read the ring RAPS information. | ||||
| ChwConfigVersion | 1.3.6.1.4.1.2011.5.25.256.1.2.1.11 | INTEGER | RC | |
column · INTEGER · read-create · current This object indicates the version information of the ring. The default version is V1.
| ||||
| ChwConfigRevertiveMode | 1.3.6.1.4.1.2011.5.25.256.1.2.1.12 | INTEGER | RC | |
column · INTEGER · read-create · current This object indicates the ring's switchback mode. The default mode is revertive switching.
| ||||
| ChwConfigRingRole | 1.3.6.1.4.1.2011.5.25.256.1.2.1.13 | INTEGER | RC | |
column · INTEGER · read-create · current This object indicates that the ring is configured as a sub-ring.
| ||||
| ChwConfigRapsChannelMode | 1.3.6.1.4.1.2011.5.25.256.1.2.1.14 | INTEGER | RC | |
column · INTEGER · read-create · current This object indicates the sub-ring channel mode. By default, a non-virtual channel is used. If the ring is the primary ring, the system returns 65535 (not used) after the read operation is performed.
| ||||
| ChwConfigTcNotifyErpsRing | 1.3.6.1.4.1.2011.5.25.256.1.2.1.15 | OCTET STRING (SIZE (0..32)) | RC | |
column · OCTET STRING (SIZE (0..32)) · read-create · current This object indicates the list of rings to be informed when the topology changes. | ||||
| ChwConfigTcProtectionInterval | 1.3.6.1.4.1.2011.5.25.256.1.2.1.16 | Integer32 (1..600) | RC | |
column · Integer32 (1..600) · read-create · current This object indicates the notification interval when the ring topology changes. The default value is 2s. | ||||
| ChwConfigTcProtectionThreshold | 1.3.6.1.4.1.2011.5.25.256.1.2.1.17 | Integer32 (1..255) | RC | |
column · Integer32 (1..255) · read-create · current This object indicates the notification threshold when the ring topology changes. The default value is 3. | ||||
| ChwConfigProtectionSwitch | 1.3.6.1.4.1.2011.5.25.256.1.2.1.18 | INTEGER | RC | |
column · INTEGER · read-create · current This object indicates canceling the ring configuration. The value is 65535 by default. When the ring configuration is canceled, the value is 1 (cleared).
| ||||
| ThwErpsRingStatusTable | 1.3.6.1.4.1.2011.5.25.256.1.3 | NA | ||
table · not-accessible · current This table describes the ERPS ring status. | ||||
| RhwErpsRingStatusEntry | 1.3.6.1.4.1.2011.5.25.256.1.3.1 | NA | ||
row · not-accessible · current The table includes the status of ERPS rings. The index of the table is ERPS ring id.
| ||||
| ChwStatusWtrTimerRunningValue | 1.3.6.1.4.1.2011.5.25.256.1.3.1.1 | Integer32 (0..720) | RO | |
column · Integer32 (0..720) · read-only · current This object indicates the time that the ring WTR timer is running.
| ||||
| ChwStatusGuardTimerRunningValue | 1.3.6.1.4.1.2011.5.25.256.1.3.1.2 | Integer32 (0..200) | RO | |
column · Integer32 (0..200) · read-only · current This object indicates the time that the ring protection timer is running.
| ||||
| ChwStatusHoldoffTimerRunningValue | 1.3.6.1.4.1.2011.5.25.256.1.3.1.3 | Integer32 (0..100) | RO | |
column · Integer32 (0..100) · read-only · current This object indicates the time that the ring delay timer is running.
| ||||
| ChwStatusMachineState | 1.3.6.1.4.1.2011.5.25.256.1.3.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the ring state machine status. 1: default state. 2: protection state. 3: manual switching state. 4: forced switching state. 5: waiting state.
| ||||
| ChwStatusTopoLastChangeTime | 1.3.6.1.4.1.2011.5.25.256.1.3.1.5 | TimeTicks | RO | |
column · TimeTicks · read-only · current This object indicates the time when the ring topology changed for the last time. | ||||
| ChwStatusWtbTimerRunningValue | 1.3.6.1.4.1.2011.5.25.256.1.3.1.6 | Integer32 (0..700) | RO | |
column · Integer32 (0..700) · read-only · current This object indicates the running time after which the ring is blocked.
| ||||
| ThwErpsPortConfigTable | 1.3.6.1.4.1.2011.5.25.256.1.4 | NA | ||
table · not-accessible · current This table describes interface configurations on an ERPS ring. | ||||
| RhwErpsPortConfigEntry | 1.3.6.1.4.1.2011.5.25.256.1.4.1 | NA | ||
row · not-accessible · current The table includes the configuration of ERPS ports. The index of the table is ERPS ring identifier, port type, port identifier1, port identifier2, port identifier3, port identifier4. If it is an ethernet port including fast ethernet/gigabit ethernet/eth-trunk, the port type is 1, the port identifier1 is the IfIndex of the ethernet port. the other port identifier is for extension and not used currently, should be set 0. | ||||
| ChwConfigPortType | 1.3.6.1.4.1.2011.5.25.256.1.4.1.1 | Unsigned32 (1) | NA | |
column · Unsigned32 (1) · not-accessible · current This object indicates the interface type on the ring. Currently, ERPS supports only Ethernet interfaces. The value is fixed at 1. | ||||
| ChwConfigPortId1 | 1.3.6.1.4.1.2011.5.25.256.1.4.1.2 | Unsigned32 (0..2147483647) | NA | |
column · Unsigned32 (0..2147483647) · not-accessible · current This object indicates the interface identified by Id1 on the ring. When the hwConfigPortType value is 1, this object indicates the interface index on the ring. | ||||
| ChwConfigPortId2 | 1.3.6.1.4.1.2011.5.25.256.1.4.1.3 | Unsigned32 (0..2147483647) | NA | |
column · Unsigned32 (0..2147483647) · not-accessible · current This object indicates the interface identified by Id2. This field is used for extension and is not used currently. The value should be set to 0. | ||||
| ChwConfigPortId3 | 1.3.6.1.4.1.2011.5.25.256.1.4.1.4 | Unsigned32 (0..2147483647) | NA | |
column · Unsigned32 (0..2147483647) · not-accessible · current This object indicates the interface identified by Id3. This field is used for extension and is not used currently. The value should be set to 0. | ||||
| ChwConfigPortId4 | 1.3.6.1.4.1.2011.5.25.256.1.4.1.5 | Unsigned32 (0..2147483647) | NA | |
column · Unsigned32 (0..2147483647) · not-accessible · current This object indicates the interface identified by Id4 on the ring. This field is used for extension and is not used currently. The value should be set to 0. | ||||
| ChwConfigPortRowStatus | 1.3.6.1.4.1.2011.5.25.256.1.4.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current Operation of CreateAndGo can be used to have a port join the ERPS ring. and operation of Destroy be used to have a port leave the ERPS ring. | ||||
| ChwConfigPortConfigRole | 1.3.6.1.4.1.2011.5.25.256.1.4.1.7 | Integer32 | RC | |
column · Integer32 · read-create · current This object indicates the configured role of the ring interface. 0x10: common interface. 0x21: rplOwner interface. 0x22: rplNeighbour interface. | ||||
| ChwConfigPortProtectionSwitch | 1.3.6.1.4.1.2011.5.25.256.1.4.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current This object indicates the protection switching mode, including forced switching and manual switching. If the mode is not set, the default value 65535 is returned.
| ||||
| ThwErpsPortStatusTable | 1.3.6.1.4.1.2011.5.25.256.1.5 | NA | ||
table · not-accessible · current This table describes the ERPS ring interface status. | ||||
| RhwErpsPortStatusEntry | 1.3.6.1.4.1.2011.5.25.256.1.5.1 | NA | ||
row · not-accessible · current The table includes the status of ERPS ports. The index of the table is ERPS ring identifier, port type, port identifier1, port identifier2, port identifier3, port identifier4. If it is an ethernet port including fast ethernet/gigabit ethernet/eth-trunk, the port type is 1, the port identifier1 is the IfIndex of the ethernet port. the other port identifier is for extension and not used currently, should be set 0. | ||||
| ChwPortStatusActiveRole | 1.3.6.1.4.1.2011.5.25.256.1.5.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the member role of the ring interface. 0x10: common interface. 0x21: rplOwner interface. 0x22: rplNeighbour interface. | ||||
| ChwPortStatusSignalStatus | 1.3.6.1.4.1.2011.5.25.256.1.5.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the signal status of the ring interface. 1: failed. 2: successful.
| ||||
| ChwPortStatusFwdStatus | 1.3.6.1.4.1.2011.5.25.256.1.5.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the forwarding status of the ring interface. 1: blocked. 2: forwarding.
| ||||
| ThwErpsPortStatisticsTable | 1.3.6.1.4.1.2011.5.25.256.1.6 | NA | ||
table · not-accessible · current This table describes the ERPS ring interface statistics. | ||||
| RhwErpsPortStatisticsEntry | 1.3.6.1.4.1.2011.5.25.256.1.6.1 | NA | ||
row · not-accessible · current The table includes the Statistics of ERPS ports. The index of the table is ERPS ring identifier, port type, port identifier1, port identifier2, port identifier3, port identifier4. If it is an ethernet port including fast ethernet/gigabit ethernet/eth-trunk, the port type is 1, the port identifier1 is the IfIndex of the ethernet port. the other port identifier is for extension and not used currently, should be set 0. | ||||
| ChwRxRapsSfPktCnt | 1.3.6.1.4.1.2011.5.25.256.1.6.1.1 | Counter32 | RO | |
column · Counter32 · read-only · current This object indicates the number of received RAPS SF packets. | ||||
| ChwTxRapsSfPktCnt | 1.3.6.1.4.1.2011.5.25.256.1.6.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current This object indicates the number of sent RAPS SF packets. | ||||
| ChwRxRapsNrPktCnt | 1.3.6.1.4.1.2011.5.25.256.1.6.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current This object indicates the number of received RAPS NR packets. | ||||
| ChwTxRapsNrPktCnt | 1.3.6.1.4.1.2011.5.25.256.1.6.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current This object indicates the number of sent RAPS NR packets. | ||||
| ChwRxRapsNrRbPktCnt | 1.3.6.1.4.1.2011.5.25.256.1.6.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current This object indicates the number of received RAPS NRRB packets. | ||||
| ChwTxRapsNrRbPktCnt | 1.3.6.1.4.1.2011.5.25.256.1.6.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current This object indicates the number of sent RAPS NRRB packets. | ||||
| ChwRxRapsFsPktCnt | 1.3.6.1.4.1.2011.5.25.256.1.6.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current This object indicates the number of received RAPS FS packets. | ||||
| ChwTxRapsFsPktCnt | 1.3.6.1.4.1.2011.5.25.256.1.6.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current This object indicates the number of sent RAPS FS packets. | ||||
| ChwRxRapsMsPktCnt | 1.3.6.1.4.1.2011.5.25.256.1.6.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current This object indicates the number of received RAPS MS packets. | ||||
| ChwTxRapsMsPktCnt | 1.3.6.1.4.1.2011.5.25.256.1.6.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current This object indicates the number of sent RAPS MS packets. | ||||
| ChwRxRapsEventPktCnt | 1.3.6.1.4.1.2011.5.25.256.1.6.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current This object indicates the number of received RAPS Event packets. | ||||
| ChwTxRapsEventPktCnt | 1.3.6.1.4.1.2011.5.25.256.1.6.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current This object indicates the number of sent RAPS Event packets. | ||||
| ThwErpsPortTrackTable | 1.3.6.1.4.1.2011.5.25.256.1.7 | NA | ||
table · not-accessible · current The table includes the information of ERPS ports track. | ||||
| RhwErpsPortTrackEntry | 1.3.6.1.4.1.2011.5.25.256.1.7.1 | NA | ||
row · not-accessible · current The table includes the information of ERPS ports track. The index of the table is ERPS ring identifier, port type, port identifier1, port identifier2, port identifier3, port identifier4, protocol type. If it is an ethernet port including fast ethernet/gigabit ethernet/eth-trunk, the port type is 1, the port identifier1 is the IfIndex of the ethernet port. the other port identifier is for extension and not used currently, should be set 0. | ||||
| ChwErpsPortTrackProtocolType | 1.3.6.1.4.1.2011.5.25.256.1.7.1.1 | INTEGER | AN | |
column · INTEGER · accessible-for-notify · current The protocol type that ERPS port tracks. Currently ERPS port just supports tracking CFM.
| ||||
| ChwErpsPortTrackRowStatus | 1.3.6.1.4.1.2011.5.25.256.1.7.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The CreateAndGo operation enables an ERPS port to track the protocol. The Destroy operation disables an ERPS port from tracking the protocol. | ||||
| ChwErpsPortTrackCfmMdName | 1.3.6.1.4.1.2011.5.25.256.1.7.1.3 | OCTET STRING (SIZE (1..43)) | RC | |
column · OCTET STRING (SIZE (1..43)) · read-create · current The name of maintenance domain. | ||||
| ChwErpsPortTrackCfmMaName | 1.3.6.1.4.1.2011.5.25.256.1.7.1.4 | OCTET STRING (SIZE (1..43)) | RC | |
column · OCTET STRING (SIZE (1..43)) · read-create · current The name of maintenance association. | ||||
| ChwErpsPortTrackCfmMepId | 1.3.6.1.4.1.2011.5.25.256.1.7.1.5 | Integer32 (1..8191) | RC | |
column · Integer32 (1..8191) · read-create · current MEP ID. | ||||
| ChwErpsPortTrackCfmRmepId | 1.3.6.1.4.1.2011.5.25.256.1.7.1.6 | Integer32 (1..8191) | RC | |
column · Integer32 (1..8191) · read-create · current Remote MEP ID. | ||||
| NhwErpsGroups | 1.3.6.1.4.1.2011.5.25.256.2 | |||
| GhwErpsGlobalInfoGroup | 1.3.6.1.4.1.2011.5.25.256.2.1 | |||
| GhwErpsRingConfigInfoGroup | 1.3.6.1.4.1.2011.5.25.256.2.2 | |||
group · current The group of ring configuration.
| ||||
| GhwErpsRingStatusInfoGroup | 1.3.6.1.4.1.2011.5.25.256.2.3 | |||
group · current The group of ring status. | ||||
| GhwErpsPortConfigInfoGroup | 1.3.6.1.4.1.2011.5.25.256.2.4 | |||
group · current The group of port configuration. | ||||
| GhwErpsPortStatusInfoGroup | 1.3.6.1.4.1.2011.5.25.256.2.5 | |||
group · current The group of port status. | ||||
| GhwErpsPortStatisticsInfoGroup | 1.3.6.1.4.1.2011.5.25.256.2.6 | |||
group · current The group of port information. | ||||
| GhwErpsPortTrackInfoGroup | 1.3.6.1.4.1.2011.5.25.256.2.7 | |||
group · current The group of ERPS port tracking information. | ||||
| GhwErpsNotificationGroup | 1.3.6.1.4.1.2011.5.25.256.2.8 | |||
| NhwErpsConformance | 1.3.6.1.4.1.2011.5.25.256.3 | |||
| NhwErpsCompliances | 1.3.6.1.4.1.2011.5.25.256.3.1 | |||
| MhwErpsCompliance | 1.3.6.1.4.1.2011.5.25.256.3.1.1 | |||
compliance · current The core compliance statement for all implementations. | ||||
| NhwErpsNotifications | 1.3.6.1.4.1.2011.5.25.256.4 | |||
| !hwErpsFwStateForwarding | 1.3.6.1.4.1.2011.5.25.256.4.1 | |||
notification · current This object indicates that an alarm is generated when an interface added to the ERPS ring enters the Forwarding state.
| ||||
| !hwErpsFwStateDiscarding | 1.3.6.1.4.1.2011.5.25.256.4.2 | |||
notification · current This object indicates that an alarm is generated when an interface added to the ERPS ring enters the Discarding state.
| ||||
Traps / Notifications
- hwErpsFwStateDiscarding
1.3.6.1.4.1.2011.5.25.256.4.2 - hwErpsFwStateForwarding
1.3.6.1.4.1.2011.5.25.256.4.1