HUAWEI-ENVIRONMENT-MIB
HUAWEI Technology Co.,LtdThe MIB module defines MIB objects which include Environment Monitor Unit, Analog Environment data, Digital Environment data, Out data and Fan data Monitor management MIB interfaces.
snmptranslate -m HUAWEI-ENVIRONMENT-MIB -Tpsnmpwalk -v2c -c <community> -m HUAWEI-ENVIRONMENT-MIB <host> 1.3.6.1.4.1.2011.6.1Imports
| HUAWEI-DEVICE-MIB | hwFrameIndex |
|---|---|
| HUAWEI-MIB | huaweiUtility |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IhwEnvironment | 1.3.6.1.4.1.2011.6.1 | |||
identity The MIB module defines MIB objects which include Environment Monitor Unit, Analog Environment data, Digital Environment data, Out data and Fan data Monitor management MIB interfaces. | ||||
| NhwEnvironmentMon | 1.3.6.1.4.1.2011.6.1.1 | |||
| ThwEnvironmentInfoTable | 1.3.6.1.4.1.2011.6.1.1.1 | NA | ||
table · not-accessible · current Information table of Environment Monitor Unit. The Environment Monitor Unit is some kind of Environment monitoring device and is used to monitor many kinds of Environment data. The maximum number of Environment Monitor Units in one device node is 64. The index of this table is hwEnvEmuIndex. hwEnvEmuIndex is the index of one Environment Monitor Unit. | ||||
| RhwEnvironmentInfoEntry | 1.3.6.1.4.1.2011.6.1.1.1.1 | NA | ||
row · not-accessible · current Information table of Environment Monitor Unit. The Environment Monitor Unit is some kind of Environment monitoring device and is used to monitor many kinds of Environment data. The maximum number of Environment Monitor Units in one device node is 64. The index of this entry is hwEnvEmuIndex. hwEnvEmuIndex is the index of one Environment Monitor Unit.
| ||||
| ChwEnvEmuIndex | 1.3.6.1.4.1.2011.6.1.1.1.1.1 | Integer32 (0..2048) | RO | |
column · Integer32 (0..2048) · read-only · current hwEnvEmuIndex is the index of the Environment monitoring unit, used as the index of hwEnvironmentInfoTable. Range: 0 - 2048 | ||||
| ChwEnvEmuType | 1.3.6.1.4.1.2011.6.1.1.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Type of the physical monitoring devices associated with the environment monitoring unit. Options: 1.h302ESC(1) -Type of the physical monitoring devices is H302ESC 2.h303ESC(2) -Type of the physical monitoring devices is H303ESC 3.h4875(3) -Type of the physical monitoring devices is 4875 power monitoring frame 4.h301ESC(4) -Type of the physical monitoring devices is H301ESC 5.switch(5) -Distribute monitoring frame 6.fanEscFrame(6) -ESC monitoring fan frame 7.fanFrame(7) -FAN 8.h4845(8) -Pwr4845 9.fanFCBFrame(9) -FCB monitoring fan frame 10.fanFDMUFrame(10) -FDMU monitoring fan frame 11.h304ESC(11) -provides the management function of battery 12.pwma(12) -Type of the physical monitoring devices is pwma 13.h561esc(13) -H561ESC 14.h801esc(14) -H801ESC 15.h612pwbp(15) -H612pwbp 16.pse158(16) -pse158 17.h4805(19) -h4805 18.pdu(20) -pdu 19.acrmu(21) -ac_rmu 20.acfan(22) -ac_fan 21.dcfan(23) -dc_fan 22.rmun1509(24) -rmun1509 23.onps150(25) -onps150 24.h801pmix(26) -h801pmix 25.h4875L(27) -Pwr4875L 26.miniESC(28) -MINIESC 27.h831VESC(29) -H831VESC 28.h601VESC(30) -H601VESC 29.h4830L(31) -Pwr4830L 30.h801citx(32) -H801CITX 31.h801citd(33) -H801CITD 32.h831ccuh(34) -h831ccuh 33.h831pmu(35) -h831pmu 34.pwr3000(36) -Pwr3000 35.tcu(37) -TCU 36.liFeBattery(38) -liFeBattery 37.transemu(39) -a type of emu for transport environment information to managment center 38.smu(40) -SMU 39.vpea(41) -VPEA 40.h801VESC(42) -H801VESC 41.leadAcidBattery(43) -LeadBattery 42.h801PMU(44) -H801PMU 43.h901VESC(45) -H901VESC 44.rpsr(46) -Remote Power System RemoteUnit 45.emub(47) -EMUB 46.other(255) -Unknow
| ||||
| ChwEnvBoardName | 1.3.6.1.4.1.2011.6.1.1.1.1.3 | DisplayString | RW | |
column · DisplayString · read-write · current Name of the environment monitoring unit. | ||||
| ChwEnvCommState | 1.3.6.1.4.1.2011.6.1.1.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Status of the communication between the environment monitoring unit and the device. The environmental condition can be tested only when the communication is normal. Options: 1.normal(1) - indicates that communication state is normal 2.shutdown(2) - indicates that communication state is shutdown 3.fault(3) - indicates that communication state is fault 4.abnormal(4) - indicates that communication state is abnormal 5.config(5) - indicates that communication state is config
| ||||
| ChwEnvRowStatus | 1.3.6.1.4.1.2011.6.1.1.1.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus standard operation. The creation and deletion operations are supported currently. | ||||
| ChwEnvVersion | 1.3.6.1.4.1.2011.6.1.1.1.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current Version information of the environment monitoring unit. invalid(zero-length) | ||||
| ChwEnvFrameId | 1.3.6.1.4.1.2011.6.1.1.1.1.7 | Integer32 | RW | |
column · Integer32 · read-write · current ID of the shelf housing the environment monitoring unit. | ||||
| ChwEnvAdminStatus | 1.3.6.1.4.1.2011.6.1.1.1.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current The management status of the monitoring unit. Options: 1.noOperation(1) -no any operation 2.reset(2) -reset the monitoring board 3.manage(3) -manage the monitoring unit 4.unmanage(4) -undo manage the monitoring unit 5.clearsmokealarm(5) -clear the smoke alarm for miniEsc
| ||||
| ChwEnvSlaveNodeId | 1.3.6.1.4.1.2011.6.1.1.1.1.9 | Integer32 | RW | |
column · Integer32 · read-write · current ID of the slave object that the environment monitoring unit belongs to. The environment monitoring unit uses the slave object ID to communicate with the upstream equipment. | ||||
| ChwEnvComType | 1.3.6.1.4.1.2011.6.1.1.1.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current The serial communication protocol type between the monitoring unit and the upstream equipment. The protocol types used are as follows: Options: 1.unknown(1) -The protocol types is unknown 2.serialRS485(2) -The protocol types is serialRS485 3.serialRS232(3) -The protocol types is serialRS232 4.serialRS422(4) -The protocol types is serialRS422
| ||||
| ChwEnvCLEICode | 1.3.6.1.4.1.2011.6.1.1.1.1.11 | OCTET STRING (SIZE (0..640)) | RO | |
column · OCTET STRING (SIZE (0..640)) · read-only · current Environment CLEI Code. | ||||
| ChwEnvEmuPower | 1.3.6.1.4.1.2011.6.1.1.1.1.12 | Integer32 (-1..255) | RO | |
column · Integer32 (-1..255) · read-only · current Power of the environment monitoring equipment associated with the environment monitoring unit. Unit: Watt. Invalid:-1. | ||||
| ChwEnvEmuTypeName | 1.3.6.1.4.1.2011.6.1.1.1.1.13 | DisplayString | RO | |
column · DisplayString · read-only · current Name of the environment type. Invalid: null string. | ||||
| ThwAnaChannelTable | 1.3.6.1.4.1.2011.6.1.1.2 | NA | ||
table · not-accessible · current Information table of the analog parameters monitored. The indexes of this table are hwEnvEmuIndex or hwAnaChannelIndex. hwEnvEmuIndex is the index of the environment monitoring unit, and hwAnaChannelIndex is the index of the analog parameter that is monitored by a monitoring unit. | ||||
| RhwAnaChannelEntry | 1.3.6.1.4.1.2011.6.1.1.2.1 | NA | ||
row · not-accessible · current Information table of the analog parameters monitored. The indexes of this entry are hwEnvEmuIndex or hwAnaChannelIndex. hwEnvEmuIndex is the index of the environment monitoring unit, and hwAnaChannelIndex is the index of the analog parameter that is monitored by a monitoring unit. | ||||
| ChwAnaChannelIndex | 1.3.6.1.4.1.2011.6.1.1.2.1.1 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current Index of the analog parameter that is monitored by the monitoring unit. Range: 0 - 255 | ||||
| ChwAnaName | 1.3.6.1.4.1.2011.6.1.1.2.1.2 | DisplayString | RW | |
column · DisplayString · read-write · current Name of the analog parameter that is monitored by a monitoring unit. | ||||
| ChwAnaType | 1.3.6.1.4.1.2011.6.1.1.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the type of the sensor that is used to test the Analog parameter. Options: 1.invalid(-1) -there is no valid sensor 2.voltage(1) -voltage sensor currently 3.electriccurrent(2) -electric current sensor currently
| ||||
| ChwAnaMeasureType | 1.3.6.1.4.1.2011.6.1.1.2.1.4 | DisplayString | RW | |
column · DisplayString · read-write · current This object indicates the unit of the analog parameter that is tested. | ||||
| ChwAnaWorkHigh | 1.3.6.1.4.1.2011.6.1.1.2.1.5 | Integer32 | RW | |
column · Integer32 · read-write · current High limit of the analog normal work | ||||
| ChwAnaWorkLow | 1.3.6.1.4.1.2011.6.1.1.2.1.6 | Integer32 | RW | |
column · Integer32 · read-write · current Low limit of the analog normal work | ||||
| ChwAnaAlmHigh | 1.3.6.1.4.1.2011.6.1.1.2.1.7 | Integer32 | RW | |
column · Integer32 · read-write · current High limit of the analog alarm. The alarm is produced when the measurement value is higher than this value | ||||
| ChwAnaAlmLow | 1.3.6.1.4.1.2011.6.1.1.2.1.8 | Integer32 | RW | |
column · Integer32 · read-write · current The low limit of the analog alarm. The alarm is produced when the measurement value is lower than this value. | ||||
| ChwAnaCurrentValue | 1.3.6.1.4.1.2011.6.1.1.2.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current The actual measurement value of the present analog. Unit: milli invalid: 0x7fffffff
| ||||
| ChwAnaAlarmState | 1.3.6.1.4.1.2011.6.1.1.2.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current The status of the present monitored.
Options:
1.normal(1) -indicates that the measurement value is lower than the set high
limit of the alarm, and higher than the low limit
2.overWorkHigh(2) -indicates that the measurement value is higher than the high limit of the alarm
3.belowWorkLow(3) -indicates that the measurement value is lower than the low limit of the alarm
4.abnormal(4) -indicates that the measurement value is outside the scope of limit of the alarm
5.invalid(-1) -indicates that the device can not get the value, e.g. the EMU does not support this operation, or the EMU state is abnormal
| ||||
| ChwAnaRowStatus | 1.3.6.1.4.1.2011.6.1.1.2.1.11 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus standard operation. The values 1 and 2 are supported currently. 1 indicates the activation status, and 2 indicates the non-activation status. | ||||
| ChwAnaAlarmID | 1.3.6.1.4.1.2011.6.1.1.2.1.12 | INTEGER | RW | |
column · INTEGER · read-write · current Analog alarm definition. Options: 1.temperature(1) -temperature alarm 2.humidity(2) -humidity alarm 3.voltage(3) -voltage alarm 4.electriccurrent(4) -electric current alarm 5.userDefinedAlarm0(100) -analog user-defined alarm 0 6.userDefinedAlarm1(101) -analog user-defined alarm 1 7.userDefinedAlarm2(102) -analog user-defined alarm 2 8.userDefinedAlarm3(103) -analog user-defined alarm 3 9.userDefinedAlarm4(104) -analog user-defined alarm 4 10.userDefinedAlarm5(105) -analog user-defined alarm 5 11.userDefinedAlarm6(106) -analog user-defined alarm 6 12.userDefinedAlarm7(107) -analog user-defined alarm 7 13.userDefinedAlarm8(108) -analog user-defined alarm 8 14.userDefinedAlarm9(109) -analog user-defined alarm 9 15.userDefinedAlarm10(110) -analog user-defined alarm 10 16.userDefinedAlarm11(111) -analog user-defined alarm 11 17.userDefinedAlarm12(112) -analog user-defined alarm 12 18.userDefinedAlarm13(113) -analog user-defined alarm 13 19.userDefinedAlarm14(114) -analog user-defined alarm 14 20.userDefinedAlarm15(115) -analog user-defined alarm 15 21.default(65535) -default analog alarm
| ||||
| ChwAnaMonitorState | 1.3.6.1.4.1.2011.6.1.1.2.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current analog alarm(temperature,humidity,battery temperature) monitor flag value, The value 1 enable monitor, value 2 disable monitor.
| ||||
| ChwAnaSignalHigh | 1.3.6.1.4.1.2011.6.1.1.2.1.14 | Integer32 | RW | |
column · Integer32 · read-write · current High limit of the analog signal. invalid: 0x7fffffff. | ||||
| ChwAnaSignalLow | 1.3.6.1.4.1.2011.6.1.1.2.1.15 | Integer32 | RW | |
column · Integer32 · read-write · current Low limit of the analog signal. invalid: 0x7fffffff. | ||||
| ThwDigChannelTable | 1.3.6.1.4.1.2011.6.1.1.3 | NA | ||
table · not-accessible · current Information table of the digital parameters monitored. The indexes of this table are hwEnvEmuIndex and hwDigChannelIndex. hwEnvEmuIndex is the index of the environment monitoring unit, and hwDigChannelIndex is the index of the digital parameter that is monitored by a monitoring unit. | ||||
| RhwDigChannelEntry | 1.3.6.1.4.1.2011.6.1.1.3.1 | NA | ||
row · not-accessible · current Information table of the digital parameters monitored. The indexes of this entry are hwEnvEmuIndex and hwDigChannelIndex. hwEnvEmuIndex is the index of the environment monitoring unit, and hwDigChannelIndex is the index of the digital parameter that is monitored by a monitoring unit. | ||||
| ChwDigChannelIndex | 1.3.6.1.4.1.2011.6.1.1.3.1.1 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current Index of the digital parameter that is monitored by a monitoring unit. Range: 0 - 255 | ||||
| ChwDigChannelName | 1.3.6.1.4.1.2011.6.1.1.3.1.2 | DisplayString | RW | |
column · DisplayString · read-write · current Name of the digital parameter that is monitored by a monitoring unit. | ||||
| ChwAlmCondition | 1.3.6.1.4.1.2011.6.1.1.3.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Alarm conditions. Options: 1.lowLevelAlarm(1) -refers to the alarm produced when the digital sensor detects the low level 2.highLevelAlarm(2) -refers to the alarm produced when the digital sensor detects the high level 3.invalid(-1) -indicates that the device can not get the value, e.g. the EMU does not support this operation, or the EMU state is abnormal
| ||||
| ChwDigChannelState | 1.3.6.1.4.1.2011.6.1.1.3.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The status of the present monitored digital sensor Options: 1.normal(1) -indicates that the digital sensor works normally 2.alarm(2) -indicates that the digital sensor produces the alarm signal 3.invalid(-1) -indicates that the device can not get the value, e.g. the EMU does not support this operation, or the EMU state is abnormal
| ||||
| ChwDigRowStatus | 1.3.6.1.4.1.2011.6.1.1.3.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus standard operation. The values 1 and 2 are supported currently. 1 indicates the activation status, and 2 indicates the non-activation status. | ||||
| ChwDigAlarmID | 1.3.6.1.4.1.2011.6.1.1.3.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current Digital alarm definition. Options: 1.acvoltage(1) -ac voltage alarm 2.acswitch(2) -ac switch alarm 3.batteryvoltage(3) -battery voltage alarm 4.batteryfuse(4) -battery fuse alarm 5.loadfuse(5) -load fuse alarm 6.rectifier(6) -rectifier alarm 7.dcpower(7) -dc power alarm 8.cupboarddoor(8) -cupboard alarm 9.roomdoor(9) -room door alarm 10.window(10) -window alarm 11.thief(11) -thief alarm 12.wiring(12) -wiring alarm 13.fan(13) -fan alarm 14.fire(14) -fire alarm 15.fog(15) -fog alarm 16.water(16) -water alarm 17.diesel(17) -diesel alarm 18.smell(18) -smell alarm 19.aircondition(19) -air-condition alarm 20.arrester(20) -arrester alarm 21.dcvoltage(21) -dc voltage 22.outputswitch(22) -output swith 23.hardFault(23) -hard-fault 24.userDefinedAlarm0(100) -digital user-defined alarm 0 25.userDefinedAlarm1(101) -digital user-defined alarm 1 26.userDefinedAlarm2(102) -digital user-defined alarm 2 27.userDefinedAlarm3(103) -digital user-defined alarm 3 28.userDefinedAlarm4(104) -digital user-defined alarm 4 29.userDefinedAlarm5(105) -digital user-defined alarm 5 30.userDefinedAlarm6(106) -digital user-defined alarm 6 31.userDefinedAlarm7(107) -digital user-defined alarm 7 32.userDefinedAlarm8(108) -digital user-defined alarm 8 33.userDefinedAlarm9(109) -digital user-defined alarm 9 34.userDefinedAlarm10(110) -digital user-defined alarm 10 35.userDefinedAlarm11(111) -digital user-defined alarm 11 36.userDefinedAlarm12(112) -digital user-defined alarm 12 37.userDefinedAlarm13(113) -digital user-defined alarm 13 38.userDefinedAlarm14(114) -digital user-defined alarm 14 39.userDefinedAlarm15(115) -digital user-defined alarm 15 40.userDefinedAlarm16(116) -digital user-defined alarm 16 41.userDefinedAlarm17(117) -digital user-defined alarm 17 42.userDefinedAlarm18(118) -digital user-defined alarm 18 43.userDefinedAlarm19(119) -digital user-defined alarm 19 44.userDefinedAlarm20(120) -digital user-defined alarm 20 45.userDefinedAlarm21(121) -digital user-defined alarm 21 46.userDefinedAlarm22(122) -digital user-defined alarm 22 47.userDefinedAlarm23(123) -digital user-defined alarm 23 48.userDefinedAlarm24(124) -digital user-defined alarm 24 49.userDefinedAlarm25(125) -digital user-defined alarm 25 50.userDefinedAlarm26(126) -digital user-defined alarm 26 51.userDefinedAlarm27(127) -digital user-defined alarm 27 52.userDefinedAlarm28(128) -digital user-defined alarm 28 53.userDefinedAlarm29(129) -digital user-defined alarm 29 54.userDefinedAlarm30(130) -digital user-defined alarm 30 55.userDefinedAlarm31(131) -digital user-defined alarm 31 56.default(65535) -digital alarm
| ||||
| ChwDigMonitorState | 1.3.6.1.4.1.2011.6.1.1.3.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current default digital alarm(Door,Water,Smoke,Wiring) monitor flag value, The value 1 enable monitor, value 2 disable monitor.
| ||||
| ThwControlOutTable | 1.3.6.1.4.1.2011.6.1.1.4 | NA | ||
table · not-accessible · current Monitored digital out table. This table indicates information about whether digital parameter is monitored. The indexes of this table are hwEnvEmuIndex and hwControlOutIndex. hwEnvEmuIndex is the index of the monitoring unit, and hwControlOutIndex is the index of the digital out table monitored in the monitoring unit. | ||||
| RhwControlOutEntry | 1.3.6.1.4.1.2011.6.1.1.4.1 | NA | ||
row · not-accessible · current Monitored digital out table. This table indicates information about whether digital parameter is monitored. The indexes of this entry are hwEnvEmuIndex and hwControlOutIndex. hwEnvEmuIndex is the index of the monitoring unit, and hwControlOutIndex is the index of the digital out table monitored in the monitoring unit. | ||||
| ChwControlOutIndex | 1.3.6.1.4.1.2011.6.1.1.4.1.1 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current Index of the digital out table monitored in the monitoring unit Range: 0 - 255 | ||||
| ChwControlOutName | 1.3.6.1.4.1.2011.6.1.1.4.1.2 | DisplayString | RW | |
column · DisplayString · read-write · current Name of the monitored digital out table | ||||
| ChwControlOutAdminStatus | 1.3.6.1.4.1.2011.6.1.1.4.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Control Out administration: executes the on/off operation. Options: 1. on(1) - trun on 2. off(2) - trun off
| ||||
| ChwControlOutRowStatus | 1.3.6.1.4.1.2011.6.1.1.4.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus standard operation. The values 1 and 2 are supported currently. 1 indicates the activation status, and 2 indicates the non-activation status. | ||||
| ThwFanTable | 1.3.6.1.4.1.2011.6.1.1.5 | NA | ||
table · not-accessible · current Information table of fan monitoring. The index of this table is hwEnvEmuIndex that comes from hwEnvironmentInfoTable. hwEnvEmuIndex is the index of the monitoring unit whose monitoring type is fan. | ||||
| RhwFanEntry | 1.3.6.1.4.1.2011.6.1.1.5.1 | NA | ||
row · not-accessible · current Information table of fan monitoring. The index of this entry is hwEnvEmuIndex that comes from hwEnvironmentInfoTable. hwEnvEmuIndex is the index of the monitoring unit whose monitoring type is fan.
| ||||
| ChwFanName | 1.3.6.1.4.1.2011.6.1.1.5.1.1 | DisplayString | RW | |
column · DisplayString · read-write · current Fan name | ||||
| ChwFanControlMode | 1.3.6.1.4.1.2011.6.1.1.5.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The fan control modes of the fan frame.
Options:
1.manual(1) -indicates that the fan is always on, and the fan speed can be manually adjusted
2.emuAuto(2) -indicates that the fan is in the automatic mode, and can be automatically
controlled depending on the temperature of the fan
3.fixed(3) -indicates that the fan is in the fixed mode, and adjusting its speed is not allowed
4.mainboardAuto(4) -indicates that the fan is in the automatic mode, and can be automatically
controlled depending on the temperature of the boards in the frame
5.invalid(-1) -indicates that the fan control mode is invalid.
| ||||
| ChwFanControlState | 1.3.6.1.4.1.2011.6.1.1.5.1.3 | Bits | RW | |
column · Bits · read-write · current For ESC fan, all should be checked to turn on the fan, while all should not be checked to turn off the fan. Options: 1.fan1(0) -indicates that the first fan needs to be opened 2.fan2(1) -indicates that the second fan needs to be opened 3.fan3(2) -indicates that the third fan needs to be opened 4.fan4(3) -indicates that the fourth fan needs to be opened 5.fan5(4) -indicates that the fifth fan needs to be opened 6.fan6(5) -indicates that the sixth fan needs to be opened
| ||||
| ChwESCFanTempAutoOn | 1.3.6.1.4.1.2011.6.1.1.5.1.4 | Integer32 | RW | |
column · Integer32 · read-write · current The fan temperature set, in unit of centigrade. The MIB object only functions for the fan monitoring board of ESC and is not applicable to the type of fan monitoring board. Only when the fan control mode of the fan frame is hwFanControl =auto (3), the temperature control mode will take effect. When detecting the environment temperature higher than the set value, the fan will be on (or increase its rotation). | ||||
| ChwESCFanTempAutoOff | 1.3.6.1.4.1.2011.6.1.1.5.1.5 | Integer32 | RW | |
column · Integer32 · read-write · current The fan temperature set, in unit of centigrade. The MIB object only functions for the fan monitoring board of ESC and is not applicable to the type of fan monitoring board. Only when the fan control mode of the fan frame is hwFanControl =auto (3), the temperature control mode will take effect. When detecting the environment temperature is lower than the set value, the fan will be turned off (decrease its rotation). | ||||
| ChwFanRowStatus | 1.3.6.1.4.1.2011.6.1.1.5.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus standard operation. | ||||
| ChwCurrentTemp | 1.3.6.1.4.1.2011.6.1.1.5.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The present temperature value Unit: 0.01 degree invalid: 0x7fffffff | ||||
| ChwFanSpeedMode | 1.3.6.1.4.1.2011.6.1.1.5.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current The adjusting rotation mode of the fan.
Options:
1.continue(1) -continuous control
2.discontinue(2) -discrete control
3.percent(3) -duty ratio control
4.invalid(-1) -indicates that the device can not get the value, e.g. the EMU does not support
this operation, or the EMU state is abnormal
| ||||
| ChwFanSpeed | 1.3.6.1.4.1.2011.6.1.1.5.1.9 | Integer32 | RW | |
column · Integer32 · read-write · current When hwFanSpeedMode is the continue mode, 0 indicates the present wind speed +1, while 1 indicates the present wind speed -1. When hwFanSpeedMode is discontinuous, 0 indicates fixed high speed, while 1 indicates fixed low speed. When hwFanSpeedMode is percent, the value delivered by the main control is the percent value, ranging from 35 to 100, used to initialize the rotation of fan for various device main controls. invalid(-1) indicates that the fan tray does not work normally. For example, the fan tray is disconnected from the control board, or some of the fans in the fan tray are blocked. | ||||
| ChwFanTypeDescription | 1.3.6.1.4.1.2011.6.1.1.5.1.10 | DisplayString | RO | |
column · DisplayString · read-only · current Fan Type Description. Invalid: null string. | ||||
| ThwTcuTable | 1.3.6.1.4.1.2011.6.1.1.6 | NA | ||
table · not-accessible · current Information table of temperature control unit. The index of this table is hwEnvEmuIndex that comes from hwEnvironmentInfoTable. hwEnvEmuIndex is the index of the monitoring unit whose monitoring type is temperature control unit. | ||||
| RhwTcuEntry | 1.3.6.1.4.1.2011.6.1.1.6.1 | NA | ||
row · not-accessible · current Information table of temperature control unit. The index of this entry is hwEnvEmuIndex that comes from hwEnvironmentInfoTable. hwEnvEmuIndex is the index of the monitoring unit whose monitoring type is temperature control unit.
| ||||
| ChwTcuHeatExchangerType | 1.3.6.1.4.1.2011.6.1.1.6.1.1 | DisplayString | RO | |
column · DisplayString · read-only · current Heat Exchanger Type Description. Invalid: null string. | ||||
| ChwTcuExternalFanRev | 1.3.6.1.4.1.2011.6.1.1.6.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The rev of Heat Exchanger outer fan, in unit of RMP (rotate per minite), invalid(-1) | ||||
| ChwTcuInternalFanRev | 1.3.6.1.4.1.2011.6.1.1.6.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The rev of Heat Exchanger inner fan, in unit of RMP (rotate per minite), invalid(-1) | ||||
| ChwTcuStartHeatTemp | 1.3.6.1.4.1.2011.6.1.1.6.1.4 | Integer32 | RW | |
column · Integer32 · read-write · current The temperature of Heat Exchanger starts to heat up, in unit of Celsius. default: 5 | ||||
| ChwTcuStopHeatTemp | 1.3.6.1.4.1.2011.6.1.1.6.1.5 | Integer32 | RW | |
column · Integer32 · read-write · current The temperature of Heat Exchanger stops heating, in unit of Celsius. default: 25 | ||||
| ThwOpticalNodeTable | 1.3.6.1.4.1.2011.6.1.1.7 | NA | ||
table · not-accessible · current Information table of optical node unit. The index of this table is hwFrameIndex that comes from hwFrameTable. hwFrameIndex is the index of the optical node unit whose optical node type is optical node unit. | ||||
| RhwOpticalNodeEntry | 1.3.6.1.4.1.2011.6.1.1.7.1 | NA | ||
row · not-accessible · current Information table of optical node unit. interface optical node config mode.
| ||||
| ChwONCOMState | 1.3.6.1.4.1.2011.6.1.1.7.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The state of Optical node The Optical node can be used only when it is online. Options: 1.online(1) - indicates that Optical state is online 2.offline(2) - indicates that Optical state is offline 3.shutdown(3) - indicates that Optical state is shutdown
| ||||
| ChwONModelNumber | 1.3.6.1.4.1.2011.6.1.1.7.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The model number of Optical node invalid(zero-length) | ||||
| ChwONHardwareVer | 1.3.6.1.4.1.2011.6.1.1.7.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current The hard version of Optical node invalid(zero-length) | ||||
| ChwONSoftwareVer | 1.3.6.1.4.1.2011.6.1.1.7.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current The software version of Optical node invalid(zero-length) | ||||
| ChwONProductDate | 1.3.6.1.4.1.2011.6.1.1.7.1.5 | OCTET STRING (SIZE (0 | 8)) | RO | |
column · OCTET STRING (SIZE (0 | 8)) · read-only · current The product date of Optical node field octets contents range ----- ------ -------- ----- 1 1-4 year 0..65536 2 5-6 month 1..12 3 7-8 day 1..31 | ||||
| ChwOROpticalPowerValue | 1.3.6.1.4.1.2011.6.1.1.7.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current This is the power of the only channel for the single-channel optical receiver. This is the power of channel 0 for the dual-channel optical receiver. Its unit is dbm,its real accuracy is 0.01. SNMP uses it which has been enlarged 100 by host. user uses it which has been lessened 100 by SNMP. invalid: 0x7fffffff. | ||||
| ChwOROpticalPowerAlarmState | 1.3.6.1.4.1.2011.6.1.1.7.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current This is the power alarm state of the only channel for the single-channel optical receiver. This is the power alarm state of channel 0 for the dual-channel optical receiver. The Optical receiver can be used only when it is normal. Options: 1.normal(1) - indicates that Optical power alarm state is normal 2.low(2) - indicates that Optical power alarm state is low 3.high(3) - indicates that Optical power alarm state is high
| ||||
| ChwOROpticalPowerLowThreshold | 1.3.6.1.4.1.2011.6.1.1.7.1.8 | Integer32 | RW | |
column · Integer32 · read-write · current This is the low power threshold of the only channel for the single-channel optical receiver. This is the low power threshold of channel 0 for the dual-channel optical receiver. Its unit is dbm,its real accuracy is 0.01. SNMP uses it which has been enlarged 100 by host. user uses it which has been lessened 100 by SNMP. Its real range is -10dbm~3dbm,mib range is -1000dbm~300dbm. | ||||
| ChwOROpticalPowerHighThreshold | 1.3.6.1.4.1.2011.6.1.1.7.1.9 | Integer32 | RW | |
column · Integer32 · read-write · current This is the high power threshold of the only channel for the single-channel optical receiver. This is the high power threshold of channel 0 for the dual-channel optical receiver. Its unit is dbm,its real accuracy is 0.01. SNMP uses it which has been enlarged 100 by host. user uses it which has been lessened 100 by SNMP. Its real range is -10dbm~3dbm,mib range is -1000dbm~300dbm. | ||||
| ChwOROpticalAGCStart | 1.3.6.1.4.1.2011.6.1.1.7.1.10 | Integer32 | RW | |
column · Integer32 · read-write · current This is the start value of the AGC range of the only channel for the single-channel optical receiver. This is the start value of the AGC range of channel 0 for the dual-channel optical receiver. Its unit is dBm,its real range is -4dBm~3dBm. | ||||
| ChwORRFPowerValue | 1.3.6.1.4.1.2011.6.1.1.7.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current The RF power value of Optical receiver. When the dual-channel optical receiver works in combination mode, this leaf indicates the RF power of channel 0. Its unit is dBmV,its real accuracy is 0.1. SNMP uses it which has been enlarged 10 by host. user uses it which has been lessened 10 by SNMP. invalid: 0x7fffffff. | ||||
| ChwORRFPowerAlarmState | 1.3.6.1.4.1.2011.6.1.1.7.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current The RF power alarm state of Optical receiver. When the dual-channel optical receiver works in combination mode, this leaf indicates the RF power alarm status of channel 0. The Optical receiver can be used only when it is normal. Options: 1.normal(1) - indicates that RF power alarm state is normal 2.low(2) - indicates that RF power alarm state is low 3.high(3) - indicates that RF power alarm state is high
| ||||
| ChwORRFPowerLowThreshold | 1.3.6.1.4.1.2011.6.1.1.7.1.13 | Integer32 | RW | |
column · Integer32 · read-write · current The RF power low threshold of Optical receiver Its unit is dBmV,its real accuracy is 0.1. SNMP uses it which has been enlarged 10 by host. user uses it which has been lessened 10 by SNMP. Lower threshold for RF alarms(optical transceiver modularization:-15; other optical transceiver:25;unit:dBmV). Its real range is -15dBmV~70dBmV,mib range is -150dBmV~700dBmV. | ||||
| ChwORRFPowerHighThreshold | 1.3.6.1.4.1.2011.6.1.1.7.1.14 | Integer32 | RW | |
column · Integer32 · read-write · current The RF power high threshold of Optical receiver Its unit is dBmV,its real accuracy is 0.1. SNMP uses it which has been enlarged 10 by host. user uses it which has been lessened 10 by SNMP. Its real range is -15dBmV~70dBmV,mib range is -150dBmV~700dBmV. | ||||
| ChwORRFAttValue | 1.3.6.1.4.1.2011.6.1.1.7.1.15 | Integer32 | RW | |
column · Integer32 · read-write · current The RF ATT value of Optical receiver Its unit is db. Its range is 0db~10db. | ||||
| ChwORRFSwitch | 1.3.6.1.4.1.2011.6.1.1.7.1.16 | INTEGER | RW | |
column · INTEGER · read-write · current The RF switch of Optical receiver The Optical receiver can be used only when it is on. Options: 1.off(1) - indicates that RF Switch state is off 2.on(2) - indicates that RF Switch state is on
| ||||
| ChwONBarcode | 1.3.6.1.4.1.2011.6.1.1.7.1.17 | DisplayString | RO | |
column · DisplayString · read-only · current The barcode of Optical node invalid(zero-length) | ||||
| ChwONCurrentInputVoltage1 | 1.3.6.1.4.1.2011.6.1.1.7.1.18 | Integer32 | RO | |
column · Integer32 · read-only · current The current input voltage1 of Optical node. Its unit is V,its real accuracy is 0.1. SNMP uses it which has been enlarged 10 by host. user uses it which has been lessened 10 by SNMP. The current input voltage1 is positive voltage. invalid: 0x7fffffff. | ||||
| ChwONCurrentInputVoltage2 | 1.3.6.1.4.1.2011.6.1.1.7.1.19 | Integer32 | RO | |
column · Integer32 · read-only · current The current input voltage2 of Optical node. Its unit is V,its real accuracy is 0.1. SNMP uses it which has been enlarged 10 by host. user uses it which has been lessened 10 by SNMP. The current input voltage2 is positive voltage. invalid: 0x7fffffff. | ||||
| ChwORAGCRange | 1.3.6.1.4.1.2011.6.1.1.7.1.20 | DisplayString | RO | |
column · DisplayString · read-only · current This is the AGC range of the only channel for the single-channel optical receiver. This is the AGC range of channel 0 for the dual-channel optical receiver. | ||||
| ChwOTOpticalOutputPowerValue | 1.3.6.1.4.1.2011.6.1.1.7.1.21 | Integer32 | RO | |
column · Integer32 · read-only · current This is the power of the only channel for the single-channel optical transmitter. This is the power of channel 0 for the dual-channel optical transmitter. Its unit is 0.01dbm. invalid: 0x7fffffff. | ||||
| ChwOTOpticalOutputPowerAlarmState | 1.3.6.1.4.1.2011.6.1.1.7.1.22 | INTEGER | RO | |
column · INTEGER · read-only · current This is the power alarm state of the only channel for the single-channel optical transmitter. This is the power alarm state of channel 0 for the dual-channel optical transmitter. The optical transmitter can be used only when it is normal. Options: 1.normal(1) - The optical power alarm state is normal when the transmit power value between low alarm threshold and high alarm threshold. 2.low(2) - The optical power alarm state is low when the transmit power value is lower than the low alarm threshold. 3.high(3) - The optical power alarm state is high when the transmit power value is higher than the high alarm threshold.
| ||||
| ChwOTOpticalOutputPowerLowThreshold | 1.3.6.1.4.1.2011.6.1.1.7.1.23 | Integer32 | RW | |
column · Integer32 · read-write · current This is the low power threshold of the only channel for the single-channel optical transmitter. This is the low power threshold of channel 0 for the dual-channel optical transmitter. The alarm is produced when the optical transmit power value is lower than this value. Its unit is 0.01dbm. Its range is 0dbm~6dbm. | ||||
| ChwOTOpticalOutputPowerHighThreshold | 1.3.6.1.4.1.2011.6.1.1.7.1.24 | Integer32 | RW | |
column · Integer32 · read-write · current This is the high power threshold of the only channel for the single-channel optical transmitter. This is the high power threshold of channel 0 for the dual-channel optical transmitter. The alarm is produced when the optical transmit power value is higher than this value. Its unit is 0.01dbm. Its range is 0dbm~6dbm. | ||||
| ChwOTBiasValue | 1.3.6.1.4.1.2011.6.1.1.7.1.25 | Integer32 | RO | |
column · Integer32 · read-only · current This is the bias current value of the only channel for the single-channel optical transmitter. This is the bias current value of channel 0 for the dual-channel optical transmitter. Its unit is mA,its normal range is 1mA~100mA. invalid(-1) | ||||
| ChwOTBiasAlarmState | 1.3.6.1.4.1.2011.6.1.1.7.1.26 | INTEGER | RO | |
column · INTEGER · read-only · current This is the bias current alarm state of the only channel for the single-channel optical transmitter. This is the bias current alarm state of channel 0 for the dual-channel optical transmitter. The optical transmitter can be used only when it is normal. Options: 1.normal(1) - The bias current alarm state is normal when the bias current value between low alarm threshold and high alarm threshold. 2.low(2) - The bias current alarm state is low when the bias current value is lower than the low alarm threshold. 3.high(3) - The bias current alarm state is high when the bias current value is higher than the high alarm threshold.
| ||||
| ChwOTBiasLowThreshold | 1.3.6.1.4.1.2011.6.1.1.7.1.27 | Integer32 | RW | |
column · Integer32 · read-write · current This is the low bias current threshold of the only channel for the single-channel optical transmitter.
This is the low bias current threshold of channel 0 for the dual-channel optical transmitter.
The alarm is produced when the bias current value is lower than this value.
Its unit is mA.
Its range is 1mA~100mA,default value is 10mA. | ||||
| ChwOTBiasHighThreshold | 1.3.6.1.4.1.2011.6.1.1.7.1.28 | Integer32 | RW | |
column · Integer32 · read-write · current This is the high bias current threshold of the only channel for the single-channel optical transmitter.
This is the high bias current threshold of channel 0 for the dual-channel optical transmitter.
The alarm is produced when the bias current value is higher than this value.
Its unit is mA.
Its range is 1mA~100mA,default value is 60mA. | ||||
| ChwOTWaveLength | 1.3.6.1.4.1.2011.6.1.1.7.1.29 | Integer32 | RO | |
column · Integer32 · read-only · current The wave length of Optical transmitter. Its unit is nm. Its value is 1310nm or 1550nm or 1610nm. invalid(-1) | ||||
| ChwOROpticalWorkMode | 1.3.6.1.4.1.2011.6.1.1.7.1.30 | INTEGER | RW | |
column · INTEGER · read-write · current The protect-switch channel policy of dual-channel optical receiver. Options: 1.force-channel0(1) - Force channel 0 as working channel, and forbid switching channel. 2.force-channel1(2) - Force channel 1 as working channel, and forbid switching channel. 3.prefer-channel0(3) - Prefer channel 0 as working channel priority and permit switch when channel 0 failed. 4.prefer-channel1(4) - Prefer channel 1 as working channel priority and permit switch when channel 1 failed. 5.combiner(5) - Combination mode. Both channel 0 and channel 1 are working.
| ||||
| ChwOROpticalActiveChannel | 1.3.6.1.4.1.2011.6.1.1.7.1.31 | Integer32 | RO | |
column · Integer32 · read-only · current The working channel of dual-channel optical receiver. invalid(-1). | ||||
| ChwOROpticalCH1PowerValue | 1.3.6.1.4.1.2011.6.1.1.7.1.32 | Integer32 | RO | |
column · Integer32 · read-only · current This is the power of channel 1 for the dual-channel optical receiver. Its unit is dbm,its real accuracy is 0.01. SNMP uses it which has been enlarged 100 by host. user uses it which has been lessened 100 by SNMP. invalid: 0x7fffffff. | ||||
| ChwOROpticalCH1PowerAlarmState | 1.3.6.1.4.1.2011.6.1.1.7.1.33 | INTEGER | RO | |
column · INTEGER · read-only · current This is the power alarm state of channel 1 for the dual-channel optical receiver. The optical receiver can be used only when it is normal. Options: 1.normal(1) - indicates that Optical power alarm state is normal 2.low(2) - indicates that Optical power alarm state is low 3.high(3) - indicates that Optical power alarm state is high
| ||||
| ChwOROpticalCH1PowerLowThreshold | 1.3.6.1.4.1.2011.6.1.1.7.1.34 | Integer32 | RW | |
column · Integer32 · read-write · current This is the low power threshold of channel 1 for the dual-channel optical receiver. Its unit is dbm,its real accuracy is 0.01. SNMP uses it which has been enlarged 100 by host. user uses it which has been lessened 100 by SNMP. Its real range is -10dbm~3dbm,mib range is -1000dbm~300dbm. | ||||
| ChwOROpticalCH1PowerHighThreshold | 1.3.6.1.4.1.2011.6.1.1.7.1.35 | Integer32 | RW | |
column · Integer32 · read-write · current This is the high power threshold of channel 1 for the dual-channel optical receiver. Its unit is dbm,its real accuracy is 0.01. SNMP uses it which has been enlarged 100 by host. user uses it which has been lessened 100 by SNMP. Its real range is -10dbm~3dbm,mib range is -1000dbm~300dbm. | ||||
| ChwOROpticalCH1AGCStart | 1.3.6.1.4.1.2011.6.1.1.7.1.36 | Integer32 | RW | |
column · Integer32 · read-write · current This is the start value of the AGC range of channel 1 for the dual-channel optical receiver. Its unit is dBm,its real range is -4dBm~3dBm. | ||||
| ChwORAGCCH1Range | 1.3.6.1.4.1.2011.6.1.1.7.1.37 | DisplayString | RO | |
column · DisplayString · read-only · current This is the AGC range of channel 1 for the dual-channel optical receiver. | ||||
| ChwORType | 1.3.6.1.4.1.2011.6.1.1.7.1.38 | INTEGER | RO | |
column · INTEGER · read-only · current The optical type of optical node. Options: 1.optical-receiver(1) 2.optical-receiver/optical-transmitter(2) 3.dual-channel optical-receiver(3) 4.optical-receiver/dual-channel optical-transmitter(4) 5.dual-channel optical-receiver/dual-channel optical-transmitter(5) 6.dual-channel optical-receiver/optical-transmitter(6) 7.optical-transmitter(7) 8.dual-channel optical-transmitter(8) 9.invalid type(99)
| ||||
| ChwOTOpticalOutputCH1PowerValue | 1.3.6.1.4.1.2011.6.1.1.7.1.39 | Integer32 | RO | |
column · Integer32 · read-only · current This is the power of channel 1 for the dual-channel optical transmitter. Its unit is dbm,its real accuracy is 0.01. SNMP uses it which has been enlarged 100 by host. user uses it which has been lessened 100 by SNMP. invalid: 0x7fffffff. | ||||
| ChwOTOpticalOutputCH1PowerAlarmState | 1.3.6.1.4.1.2011.6.1.1.7.1.40 | INTEGER | RO | |
column · INTEGER · read-only · current This is the power alarm state of channel 1 for the dual-channel optical transmitter. The optical transmitter can be used only when it is normal. Options: 1.normal(1) - indicates that Optical power alarm state is normal 2.low(2) - indicates that Optical power alarm state is low 3.high(3) - indicates that Optical power alarm state is high
| ||||
| ChwOTOpticalOutputCH1PowerLowThreshold | 1.3.6.1.4.1.2011.6.1.1.7.1.41 | Integer32 | RW | |
column · Integer32 · read-write · current This is the low power threshold of channel 1 for the dual-channel optical transmitter. Its unit is dbm,its real accuracy is 0.01. SNMP uses it which has been enlarged 100 by host. user uses it which has been lessened 100 by SNMP. Its range is 0dbm~6dbm. | ||||
| ChwOTOpticalOutputCH1PowerHighThreshold | 1.3.6.1.4.1.2011.6.1.1.7.1.42 | Integer32 | RW | |
column · Integer32 · read-write · current This is the high power threshold of channel 1 for the dual-channel optical transmitter. Its unit is dbm,its real accuracy is 0.01. SNMP uses it which has been enlarged 100 by host. user uses it which has been lessened 100 by SNMP. Its range is 0dbm~6dbm. | ||||
| ChwOTCH1BiasValue | 1.3.6.1.4.1.2011.6.1.1.7.1.43 | Integer32 | RO | |
column · Integer32 · read-only · current This is the bias current value of channel 1 for the dual-channel optical transmitter. Its unit is mA,its normal range is 1mA~100mA. invalid(-1) | ||||
| ChwOTCH1BiasAlarmState | 1.3.6.1.4.1.2011.6.1.1.7.1.44 | INTEGER | RO | |
column · INTEGER · read-only · current This is the bias current alarm state of channel 1 for the dual-channel optical transmitter. The optical transmitter can be used only when it is normal. Options: 1.normal(1) - The bias current alarm state is normal when the bias current value between low alarm threshold and high alarm threshold. 2.low(2) - The bias current alarm state is low when the bias current value is lower than the low alarm threshold. 3.high(3) - The bias current alarm state is high when the bias current value is higher than the high alarm threshold.
| ||||
| ChwOTCH1BiasLowThreshold | 1.3.6.1.4.1.2011.6.1.1.7.1.45 | Integer32 | RW | |
column · Integer32 · read-write · current This is the low bias current threshold of channel 1 for the dual-channel optical transmitter. The alarm is produced when the bias current value is lower than this value. Its unit is mA. Its range is 1mA~100mA,default value is 10mA. | ||||
| ChwOTCH1BiasHighThreshold | 1.3.6.1.4.1.2011.6.1.1.7.1.46 | Integer32 | RW | |
column · Integer32 · read-write · current This is the high bias current threshold of channel 1 for the dual-channel optical transmitter. The alarm is produced when the bias current value is higher than this value. Its unit is mA. Its range is 1mA~100mA,default value is 60mA. | ||||
| ChwORCfgChannel0AGCMode | 1.3.6.1.4.1.2011.6.1.1.7.1.47 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates the configuration information about the AGC gain on channel 0 for the optical receiver. Options: 1.off(2) - indicates that AGC gain is off 2.minus6to2dBm(3) - indicates that the range of AGC gain is -6dBm to +2dBm 3.minus4to2dBm(4) - indicates that the range of AGC gain is -4dBm to +2dBm 4.minus2to2dBm(5) - indicates that the range of AGC gain is -2dBm to +2dBm default is minus6to2dBm(3).
| ||||
| ChwORCfgChannel1AGCMode | 1.3.6.1.4.1.2011.6.1.1.7.1.48 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates the configuration information about the AGC gain on channel 1 for the optical receiver. Options: 1.off(2) - indicates that AGC gain is off 2.minus6to2dBm(3) - indicates that the range of AGC gain is -6dBm to +2dBm 3.minus4to2dBm(4) - indicates that the range of AGC gain is -4dBm to +2dBm 4.minus2to2dBm(5) - indicates that the range of AGC gain is -2dBm to +2dBm default is minus6to2dBm(3).
| ||||
| ChwORRuninfoChannel0AGCMode | 1.3.6.1.4.1.2011.6.1.1.7.1.49 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates the running information about the AGC gain on channel 0 for the optical receiver.
Options:
1.invalid(1) - indicates that AGC gain is not supported for the optical receiver
or the optical receiver is not online
2.off(2) - indicates that AGC gain is off
3.minus6to2dBm(3) - indicates that the range of AGC gain is -6dBm to +2dBm
4.minus4to2dBm(4) - indicates that the range of AGC gain is -4dBm to +2dBm
5.minus2to2dBm(5) - indicates that the range of AGC gain is -2dBm to +2dBm
default is minus6to2dBm(3).s
| ||||
| ChwORRuninfoChannel1AGCMode | 1.3.6.1.4.1.2011.6.1.1.7.1.50 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates the running information about the AGC gain on channel 1 for the optical receiver.
Options:
1.invalid(1) - indicates that AGC gain is not supported for the optical receiver
or the optical receiver is not online
2.off(2) - indicates that AGC gain is off
3.minus6to2dBm(3) - indicates that the range of AGC gain is -6dBm to +2dBm
4.minus4to2dBm(4) - indicates that the range of AGC gain is -4dBm to +2dBm
5.minus2to2dBm(5) - indicates that the range of AGC gain is -2dBm to +2dBm
default is minus6to2dBm(3).
| ||||
| ChwORRFCH1PowerValue | 1.3.6.1.4.1.2011.6.1.1.7.1.51 | Integer32 | RO | |
column · Integer32 · read-only · current When the dual-channel optical receiver works in combination mode, this leaf takes effect and it indicates the RF power of channel 1. Its unit is dBmV,its real accuracy is 0.1. SNMP uses it which has been enlarged 10 by host. user uses it which has been lessened 10 by SNMP. invalid: 0x7fffffff. | ||||
| ChwORRFCH1PowerAlarmState | 1.3.6.1.4.1.2011.6.1.1.7.1.52 | INTEGER | RO | |
column · INTEGER · read-only · current When the dual-channel optical receiver works in combination mode, this leaf takes effect and it indicates the RF power alarm status of channel 1. The Optical receiver can be used only when it is normal. Options: 1.normal(1) - indicates that RF power alarm state is normal 2.low(2) - indicates that RF power alarm state is low 3.high(3) - indicates that RF power alarm state is high
| ||||
| ChwOTCH1WaveLength | 1.3.6.1.4.1.2011.6.1.1.7.1.53 | Integer32 | RO | |
column · Integer32 · read-only · current The wave length of channel 1 for the Optical transmitter . Its unit is nm. Its value is 1310nm or 1550nm or 1610nm. invalid(-1) | ||||
| ChwOTCfgOpticalWorkMode | 1.3.6.1.4.1.2011.6.1.1.7.1.54 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates the configuration information about the work mode for the optical transmitter. Options: 2.singleSGsingleTX(2) - indicates the working mode is single SG(service group), single TX(optical transmitter) 3.singleSGdoubleTX(3) - indicates the working mode is single SG(service group), double TX(optical transmitter) 4.doubleSGdoubleTX(4) - indicates the working mode is double SG(service group), double TX(optical transmitter) default is doubleSGdoubleTX(4).
| ||||
| ChwOTRuninfoOpticalWorkMode | 1.3.6.1.4.1.2011.6.1.1.7.1.55 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates the running information about the work mode for the optical transmitter.
1.invalid(1) - indicates the working mode is not supported for the optical transmitter
or the optical transmitter is not online
2.singleSGsingleTX(2) - indicates the working mode is single SG(service group), single TX(optical transmitter)
3.singleSGdoubleTX(3) - indicates the working mode is single SG(service group), double TX(optical transmitter)
4.doubleSGdoubleTX(4) - indicates the working mode is double SG(service group), double TX(optical transmitter)
default is doubleSGdoubleTX(4).
| ||||
| ChwOTCH0RFAttValue | 1.3.6.1.4.1.2011.6.1.1.7.1.56 | Integer32 | RW | |
column · Integer32 · read-write · current This is the rf attenuation current value of channel 0 for the dual-channel optical transmitter. Its unit is dB,its real accuracy is 0.1. SNMP uses it which has been enlarged 10 by host. user uses it which has been lessened 10 by SNMP. Its range is 0.0dB~20.0dB. invalid(-1) | ||||
| ChwOTCH1RFAttValue | 1.3.6.1.4.1.2011.6.1.1.7.1.57 | Integer32 | RW | |
column · Integer32 · read-write · current This is the rf attenuation current value of channel 1 for the dual-channel optical transmitter. Its unit is dB,its real accuracy is 0.1. SNMP uses it which has been enlarged 10 by host. user uses it which has been lessened 10 by SNMP. Its range is 0.0dB~20.0dB. invalid(-1) | ||||
| ChwORCh0OnlineState | 1.3.6.1.4.1.2011.6.1.1.7.1.58 | INTEGER | RO | |
column · INTEGER · read-only · current The state of channel 0 for the optical receiver. Options: 1.normal(1) - indicates that optical receiver channel 0 is normal 2.offline(2) - indicates that optical receiver channel 0 is offline 3.fault(3) - indicates that optical receiver channel 0 is fault 4.config(4) - indicates that optical receiver channel 0 is config 5.autoload(5) - indicates that optical receiver channel 0 is autoload 6.manualshutdown(6) - indicates that optical receiver channel 0 is manualshutdown 7.mismatch(7) - indicates that optical receiver channel 0 is mismatch
| ||||
| ChwORCh1OnlineState | 1.3.6.1.4.1.2011.6.1.1.7.1.59 | INTEGER | RO | |
column · INTEGER · read-only · current The state of channel 1 for the optical receiver. Options: 1.normal(1) - indicates that optical receiver channel 1 is normal 2.offline(2) - indicates that optical receiver channel 1 is offline 3.fault(3) - indicates that optical receiver channel 1 is fault 4.config(4) - indicates that optical receiver channel 1 is config 5.autoload(5) - indicates that optical receiver channel 1 is autoload 6.manualshutdown(6) - indicates that optical receiver channel 1 is manualshutdown 7.mismatch(7) - indicates that optical receiver channel 1 is mismatch
| ||||
| ChwOTCh0OnlineState | 1.3.6.1.4.1.2011.6.1.1.7.1.60 | INTEGER | RO | |
column · INTEGER · read-only · current The state of channel 0 for the optical transmitter. Options: 1.normal(1) - indicates that optical transmitter channel 0 is normal 2.offline(2) - indicates that optical transmitter channel 0 is offline 3.fault(3) - indicates that optical transmitter channel 0 is fault 4.config(4) - indicates that optical transmitter channel 0 is config 5.autoload(5) - indicates that optical transmitter channel 0 is autoload 6.manualshutdown(6) - indicates that optical transmitter channel 0 is manualshutdown 7.mismatch(7) - indicates that optical transmitter channel 0 is mismatch
| ||||
| ChwOTCh1OnlineState | 1.3.6.1.4.1.2011.6.1.1.7.1.61 | INTEGER | RO | |
column · INTEGER · read-only · current The state of channel 1 for the optical transmitter. Options: 1.normal(1) - indicates that optical transmitter channel 1 is normal 2.offline(2) - indicates that optical transmitter channel 1 is offline 3.fault(3) - indicates that optical transmitter channel 1 is fault 4.config(4) - indicates that optical transmitter channel 1 is config 5.autoload(5) - indicates that optical transmitter channel 1 is autoload 6.manualshutdown(6) - indicates that optical transmitter channel 1 is manualshutdown 7.mismatch(7) - indicates that optical transmitter channel 1 is mismatch
| ||||
| ChwONCfgOpticalWorkMode | 1.3.6.1.4.1.2011.6.1.1.7.1.62 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates the configuration information about the work mode for the optical node.
Options:
1.invalid(1) - indicates the working mode is not supported for the optical node
or the optical node is not online
2.singleRXdoubleTX(2) - indicates the working mode is single RX(optical receiver), double TX(optical transmitter)
3.doubleRXsingleTX(3) - indicates the working mode is double RX(optical receiver), single TX(optical transmitter)
default is singleRXdoubleTX(2).
| ||||
| ChwONRuninfoOpticalWorkMode | 1.3.6.1.4.1.2011.6.1.1.7.1.63 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates the configuration information about the work mode for the optical node.
Options:
1.invalid(1) - indicates the working mode is not supported for the optical node
or the optical node is not online
2.singleRXdoubleTX(2) - indicates the working mode is single RX(optical receiver), double TX(optical transmitter)
3.doubleRXsingleTX(3) - indicates the working mode is double RX(optical receiver), single TX(optical transmitter)
default is singleRXdoubleTX(2).
| ||||
| ChwOTCh0RuninfoOpticalLowPassFilter | 1.3.6.1.4.1.2011.6.1.1.7.1.64 | Integer32 | RO | |
column · Integer32 · read-only · current The low pass filter of channel 0 for the Optical transmitter . Its unit is MHz. Its value is 42MHz or 65MHz or 85MHz or 204MHz. invalid(-1) | ||||
| ChwOTCh1RuninfoOpticalLowPassFilter | 1.3.6.1.4.1.2011.6.1.1.7.1.65 | Integer32 | RO | |
column · Integer32 · read-only · current The low pass filter of channel 1 for the Optical transmitter . Its unit is MHz. Its value is 42MHz or 65MHz or 85MHz or 204MHz. invalid(-1) | ||||
| ChwONSmartCapability | 1.3.6.1.4.1.2011.6.1.1.7.1.66 | Bits | RO | |
column · Bits · read-only · current This MIB node is used to query the function of the optical node, which is represented by bits. Functions of each bit are as follows: 1: setOTCHRFAttValue(0) - indicates whether the RF attenuation of the optical transmitter channel is supported. 2: setONCfgOpticalWorkMode(1) - indicates whether the multiplexing mode of the optical receiver or transmitter node is supported. 3: setOTCfgOpticalWorkMode(2) - indicates whether the protection mode of the optical transmitter is supported. From left to right, each bit indicates whether the function is supported. If this bit is 1, the function is supported. If this bit is 0, the function is not supported.
| ||||
| ChwORRFPowerChangeThreshold | 1.3.6.1.4.1.2011.6.1.1.7.1.67 | Integer32 | RW | |
column · Integer32 · read-write · current The RF power change threshold of Optical receiver Its unit is dBmV,its real accuracy is 0.1. SNMP uses it which has been enlarged 10 by host. user uses it which has been lessened 10 by SNMP. Its real range is 3dBmV~15dBmV,mib range is 30dBmV~150dBmV. | ||||
| ChwORCHN0RFPowerReferenceValue | 1.3.6.1.4.1.2011.6.1.1.7.1.68 | Integer32 | RO | |
column · Integer32 · read-only · current The RF power reference value of Optical receiver. When the dual-channel optical receiver works in combination mode, this leaf indicates the RF power reference value of channel 0. Its unit is dBmV,its real accuracy is 0.1. SNMP uses it which has been enlarged 10 by host. user uses it which has been lessened 10 by SNMP. invalid: 0x7fffffff. | ||||
| ChwORCHN0RFPowerChangeValue | 1.3.6.1.4.1.2011.6.1.1.7.1.69 | Integer32 | RO | |
column · Integer32 · read-only · current The RF power change value of Optical receiver. When the dual-channel optical receiver works in combination mode, this leaf indicates the RF power change value of channel 0. Its unit is dBmV,its real accuracy is 0.1. SNMP uses it which has been enlarged 10 by host. user uses it which has been lessened 10 by SNMP. invalid: 0x7fffffff. | ||||
| ChwORCHN1RFPowerReferenceValue | 1.3.6.1.4.1.2011.6.1.1.7.1.70 | Integer32 | RO | |
column · Integer32 · read-only · current When the dual-channel optical receiver works in combination mode, this leaf takes effect and it indicates the RF power reference value of channel 1. Its unit is dBmV,its real accuracy is 0.1. SNMP uses it which has been enlarged 10 by host. user uses it which has been lessened 10 by SNMP. invalid: 0x7fffffff. | ||||
| ChwORCHN1RFPowerChangeValue | 1.3.6.1.4.1.2011.6.1.1.7.1.71 | Integer32 | RO | |
column · Integer32 · read-only · current When the dual-channel optical receiver works in combination mode, this leaf takes effect and it indicates the RF power change value of channel 1. Its unit is dBmV,its real accuracy is 0.1. SNMP uses it which has been enlarged 10 by host. user uses it which has been lessened 10 by SNMP. invalid: 0x7fffffff. | ||||
| ChwORCH0CurrentInputVoltage1 | 1.3.6.1.4.1.2011.6.1.1.7.1.72 | Integer32 | RO | |
column · Integer32 · read-only · current The RX CH0 current input voltage1 of Optical node. Its unit is V,its real accuracy is 0.1. SNMP uses it which has been enlarged 10 by host. user uses it which has been lessened 10 by SNMP. The RX CH0 current input voltage1 is positive voltage. invalid: 0x7fffffff. | ||||
| ChwORCH0CurrentInputVoltage2 | 1.3.6.1.4.1.2011.6.1.1.7.1.73 | Integer32 | RO | |
column · Integer32 · read-only · current The RX CH0 current input voltage2 of Optical node. Its unit is V,its real accuracy is 0.1. SNMP uses it which has been enlarged 10 by host. user uses it which has been lessened 10 by SNMP. The RX CH0 current input voltage2 is positive voltage. invalid: 0x7fffffff. | ||||
| ChwORCH1CurrentInputVoltage1 | 1.3.6.1.4.1.2011.6.1.1.7.1.74 | Integer32 | RO | |
column · Integer32 · read-only · current The RX CH1 current input voltage1 of Optical node. Its unit is V,its real accuracy is 0.1. SNMP uses it which has been enlarged 10 by host. user uses it which has been lessened 10 by SNMP. The RX CH1 current input voltage1 is positive voltage. invalid: 0x7fffffff. | ||||
| ChwORCH1CurrentInputVoltage2 | 1.3.6.1.4.1.2011.6.1.1.7.1.75 | Integer32 | RO | |
column · Integer32 · read-only · current The RX CH1 current input voltage2 of Optical node. Its unit is V,its real accuracy is 0.1. SNMP uses it which has been enlarged 10 by host. user uses it which has been lessened 10 by SNMP. The RX CH1 current input voltage2 is positive voltage. invalid: 0x7fffffff. | ||||
| ChwOTCH0CurrentInputVoltage1 | 1.3.6.1.4.1.2011.6.1.1.7.1.76 | Integer32 | RO | |
column · Integer32 · read-only · current The TX CH0 current input voltage1 of Optical node. Its unit is V,its real accuracy is 0.1. SNMP uses it which has been enlarged 10 by host. user uses it which has been lessened 10 by SNMP. The TX CH0 current input voltage1 is positive voltage. invalid: 0x7fffffff. | ||||
| ChwOTCH0CurrentInputVoltage2 | 1.3.6.1.4.1.2011.6.1.1.7.1.77 | Integer32 | RO | |
column · Integer32 · read-only · current The TX CH0 current input voltage2 of Optical node. Its unit is V,its real accuracy is 0.1. SNMP uses it which has been enlarged 10 by host. user uses it which has been lessened 10 by SNMP. The TX CH0 current input voltage2 is positive voltage. invalid: 0x7fffffff. | ||||
| ChwOTCH1CurrentInputVoltage1 | 1.3.6.1.4.1.2011.6.1.1.7.1.78 | Integer32 | RO | |
column · Integer32 · read-only · current The TX CH1 current input voltage1 of Optical node. Its unit is V,its real accuracy is 0.1. SNMP uses it which has been enlarged 10 by host. user uses it which has been lessened 10 by SNMP. The TX CH1 current input voltage1 is positive voltage. invalid: 0x7fffffff. | ||||
| ChwOTCH1CurrentInputVoltage2 | 1.3.6.1.4.1.2011.6.1.1.7.1.79 | Integer32 | RO | |
column · Integer32 · read-only · current The TX CH1 current input voltage2 of Optical node. Its unit is V,its real accuracy is 0.1. SNMP uses it which has been enlarged 10 by host. user uses it which has been lessened 10 by SNMP. The TX CH1 current input voltage2 is positive voltage. invalid: 0x7fffffff. | ||||
| ThwOpticalPowerTable | 1.3.6.1.4.1.2011.6.1.1.8 | NA | ||
table · not-accessible · current The indexes of this entry are hwFrameIndex and hwOpticalChnIndex. The index of this table is hwFrameIndex that comes from hwFrameTable. | ||||
| RhwOpticalPowerEntry | 1.3.6.1.4.1.2011.6.1.1.8.1 | NA | ||
row · not-accessible · current The indexes of this entry are hwFrameIndex and hwOpticalChnIndex. The index of this table is hwFrameIndex that comes from hwFrameTable. | ||||
| ChwOpticalChnIndex | 1.3.6.1.4.1.2011.6.1.1.8.1.1 | Integer32 | AN | |
column · Integer32 · accessible-for-notify · current The channel id of optical node. | ||||
| ChwOpticalPowerValue | 1.3.6.1.4.1.2011.6.1.1.8.1.2 | OCTET STRING | AN | |
column · OCTET STRING · accessible-for-notify · current The optical power value of optical node Its unit is dbm,its real accuracy is 0.01. | ||||
| ChwOpticalBiasValue | 1.3.6.1.4.1.2011.6.1.1.8.1.3 | Integer32 | AN | |
column · Integer32 · accessible-for-notify · current The optical Bias value of optical node Its unit is mA. | ||||
| ThwFanUnitTable | 1.3.6.1.4.1.2011.6.1.1.9 | NA | ||
table · not-accessible · current Fan unit table. The index of this table are hwEnvEmuIndex that comes from hwEnvironmentInfoTable and hwFanUnitIndex. hwEnvEmuIndex is the index of the monitoring unit whose monitoring type is temperature control unit, and hwFanUnitIndex is the index of fan unit that is monitored by the fan. | ||||
| RhwFanUnitEntry | 1.3.6.1.4.1.2011.6.1.1.9.1 | NA | ||
row · not-accessible · current Fan unit table. The index of this table are hwEnvEmuIndex that comes from hwEnvironmentInfoTable and hwFanUnitIndex. hwEnvEmuIndex is the index of the monitoring unit whose monitoring type is temperature control unit, and hwFanUnitIndex is the index of fan unit that is monitored by the fan.
| ||||
| ChwFanUnitIndex | 1.3.6.1.4.1.2011.6.1.1.9.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of fan unit. | ||||
| ChwFanUnitSpeed | 1.3.6.1.4.1.2011.6.1.1.9.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The speed of fan unit Its unit is round per minute, invalid: -1. | ||||
| ThwSirenTable | 1.3.6.1.4.1.2011.6.1.1.10 | NA | ||
table · not-accessible · current siren config table | ||||
| RhwSirenEntry | 1.3.6.1.4.1.2011.6.1.1.10.1 | NA | ||
| ChwSirenSwitch | 1.3.6.1.4.1.2011.6.1.1.10.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current enabe and disable the siren. 1:enable 2:disable -1:invalid
| ||||
| ChwSirenHowlerDelay | 1.3.6.1.4.1.2011.6.1.1.10.1.2 | Integer32 (0..1440) | RW | |
column · Integer32 (0..1440) · read-write · current the howler-delay of the siren.The default value is 30,the unit is minute. invalid: -1. | ||||
| ChwSirenHowlerDuration | 1.3.6.1.4.1.2011.6.1.1.10.1.3 | Integer32 (0..1440) | RW | |
column · Integer32 (0..1440) · read-write · current the howler-duration of the siren.The default value is 3,the unit is minute. invalid: -1. | ||||
| ChwSirenSlientDuration | 1.3.6.1.4.1.2011.6.1.1.10.1.4 | Integer32 (0..1440) | RW | |
column · Integer32 (0..1440) · read-write · current the slient-duration of the siren.The default value is 60,the unit is minute. invalid(-1). | ||||
| ThwElockTable | 1.3.6.1.4.1.2011.6.1.1.11 | NA | ||
table · not-accessible · current Electronic lock table. The index of this table are hwEnvEmuIndex that comes from hwEnvironmentInfoTable and hwElockIndex. hwEnvEmuIndex is the index of the monitoring unit whose monitoring type is door lock unit, and hwElockIndex is the index of door lock that is smu. | ||||
| RhwElockEntry | 1.3.6.1.4.1.2011.6.1.1.11.1 | NA | ||
row · not-accessible · current Electronic lock table. The index of this table are hwEnvEmuIndex that comes from hwEnvironmentInfoTable and hwElockIndex. hwEnvEmuIndex is the index of the monitoring unit whose monitoring type is electric lock unit, and hwElockIndex is the index of electronic lock.
| ||||
| ChwElockIndex | 1.3.6.1.4.1.2011.6.1.1.11.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of electronic lock. | ||||
| ChwElockName | 1.3.6.1.4.1.2011.6.1.1.11.1.2 | DisplayString | RW | |
column · DisplayString · read-write · current Electronic lock type: Ammeter-Compartment, Device-Compartment, Device1-Compartment, Device2-Compartment, HEX-Compartment, MDF-Compartment, MDF1-Compartment, MDF2-Compartment, | ||||
| ChwElockEnableFlag | 1.3.6.1.4.1.2011.6.1.1.11.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/Disable a electronic lock. Enable(1), Disable(2), invalid(-1)
| ||||
| ChwElockCommStatus | 1.3.6.1.4.1.2011.6.1.1.11.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The state of the communication of the electric lock with the host. unconfigured(2):The electronic has not been configured. normal(9):The communication of the electronic with the host is normal. faulty(10):The communication of the electronic with the host is abnormal. invalid: -1.
| ||||
| ChwElockCtrStatus | 1.3.6.1.4.1.2011.6.1.1.11.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current The status of electric lock. statusOpen(1):The electronic door lock is open. statusClose(0):The electronic door lock is closed. statusNoElock(255):The electronic has not been enabled. invalid: -1.
| ||||
| ThwElockRightTable | 1.3.6.1.4.1.2011.6.1.1.12 | NA | ||
table · not-accessible · current Electronic right card table. The index of this table are hwEnvEmuIndex that comes from hwEnvironmentInfoTable and hwElockRightCardId. hwEnvEmuIndex is the index of the monitoring unit whose monitoring type is door lock unit, and hwElockRightCardId is the ID of right card. | ||||
| RhwElockRightEntry | 1.3.6.1.4.1.2011.6.1.1.12.1 | NA | ||
row · not-accessible · current Electronic right card table. The index of this table are hwEnvEmuIndex that comes from hwEnvironmentInfoTable and hwElockRightCardId. hwEnvEmuIndex is the index of the monitoring unit whose monitoring type is door lock unit, and hwElockRightCardId is the index of door lock. | ||||
| ChwElockRightCardId | 1.3.6.1.4.1.2011.6.1.1.12.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The id of eletronic lock right card. | ||||
| ChwElockRightElockIndexMask | 1.3.6.1.4.1.2011.6.1.1.12.1.2 | OCTET STRING (SIZE (0 | 3)) | RW | |
column · OCTET STRING (SIZE (0 | 3)) · read-write · current 000:indicates that the right card can not open any elock. 001:indicates that the right card can open the first elock. 010:indicates that the right card can open the second elock. 100:indicates that the right card can open the third elock. 011:indicates that the right card can open the first and the second elock. 101:indicates that the right card can open the first and the third elock. 110:indicates that the right card can open the second and the third elock. 111:indicates that the right card can open all elocks. | ||||
| ChwElockRightRowStatus | 1.3.6.1.4.1.2011.6.1.1.12.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current Indicates the row status. To create an right card, set this leaf to createAndGo(4). To delete an right card, set this leaf to destroy(6). When this leaf is queried, the value is fixed to active(1). Options: 1. active(1) -indicates the query operation. 2. createAndGo(4) -indicates creating an right card. 3. destroy(6) -indicates deleting an right card. | ||||
| ChwElockRightStartTime | 1.3.6.1.4.1.2011.6.1.1.12.1.4 | OCTET STRING (SIZE (0 | 14)) | RW | |
column · OCTET STRING (SIZE (0 | 14)) · read-write · current The start time of the door card authority. field octets contents range ----- ------ -------- ----- 1 1-4 year 0..9999 2 5-6 month 1..12 3 7-8 day 1..31 4 9-10 hour 0..24 5 11-12 minute 0..60 6 13-14 second 0..60 For example, if the start time is 2017-12-20 10:20:30, the input o output is 20171220102030 | ||||
| ChwElockRightExpireTime | 1.3.6.1.4.1.2011.6.1.1.12.1.5 | OCTET STRING (SIZE (0 | 14)) | RW | |
column · OCTET STRING (SIZE (0 | 14)) · read-write · current The expire time of the door card authority. field octets contents range ----- ------ -------- ----- 1 1-4 year 0..9999 2 5-6 month 1..12 3 7-8 day 1..31 4 9-10 hour 0..24 5 11-12 minute 0..60 6 13-14 second 0..60 For example, if the expire time is 2017-12-30 10:20:30, the input o output is 20171230102030 | ||||
| ThwOpticalModuleTable | 1.3.6.1.4.1.2011.6.1.1.13 | NA | ||
table · not-accessible · current The indexes of this table are hwFrameIndex, hwOpticalModuleType, hwOpticalChnIndex and hwOpticalDevType. The index hwFrameIndex comes from hwFrameTable. | ||||
| RhwOpticalModuleEntry | 1.3.6.1.4.1.2011.6.1.1.13.1 | NA | ||
row · not-accessible · current The indexes of this entry are hwFrameIndex, hwOpticalModuleType, hwOpticalChnIndex and hwOpticalDevType. The index hwFrameIndex comes from hwFrameTable. | ||||
| ChwOpticalModuleType | 1.3.6.1.4.1.2011.6.1.1.13.1.1 | OCTET STRING | AN | |
column · OCTET STRING · accessible-for-notify · current The module type of optical node. | ||||
| ChwOpticalDevType | 1.3.6.1.4.1.2011.6.1.1.13.1.2 | OCTET STRING | AN | |
column · OCTET STRING · accessible-for-notify · current The dev type of optical node. | ||||
| NsnmpTrapsDef | 1.3.6.1.4.1.2011.6.1.2 | |||
| NemmsnmpTraps | 1.3.6.1.4.1.2011.6.1.2.0 | |||
| !envCommAlarm | 1.3.6.1.4.1.2011.6.1.2.0.1 | |||
notification · current The communication alarm of environment monitoring board, reporting the environment monitoring unit ID. This trap message is reported when the communication between the emu and control board is fault.
| ||||
| !envCommAlarmResume | 1.3.6.1.4.1.2011.6.1.2.0.2 | |||
notification · current The communication alarm recovery of the environment monitoring, reporting the environment monitoring unit ID. This trap message is reported when the communication between the emu and control board resumes.
| ||||
| !anaFaultAlarm | 1.3.6.1.4.1.2011.6.1.2.0.3 | |||
notification · current The alarm recovery of the analog exception, reporting the environment monitoring unit ID. This trap message is reported when there is an analog exception in emu.
| ||||
| !anaFaultAlarmResume | 1.3.6.1.4.1.2011.6.1.2.0.4 | |||
notification · current The alarm recovery of the analog exception, reporting the environment monitoring unit ID. This trap message is reported when the analog exception recovery in emu.
| ||||
| !anaTooHighAlarm | 1.3.6.1.4.1.2011.6.1.2.0.5 | |||
notification · current The alarm of too high an analog, reporting the environment monitoring unit ID and the channel ID of the analog sensor. This trap message is reported when an analog value is too high.
| ||||
| !anaTooHighAlarmResume | 1.3.6.1.4.1.2011.6.1.2.0.6 | |||
notification · current The alarm of too high analog resume, reporting the environment monitoring unit ID. This trap message is reported when an analog value returns to normal range from the high value.
| ||||
| !anaTooLowAlarm | 1.3.6.1.4.1.2011.6.1.2.0.7 | |||
notification · current The alarm of too low an analog, reporting the environment monitoring unit ID and the channel ID of the analog sensor. This trap message is reported when an analog value is too low.
| ||||
| !anaTooLowAlarmResume | 1.3.6.1.4.1.2011.6.1.2.0.8 | |||
notification · current The alarm of too low an analog, reporting the environment monitoring unit ID. This trap message is reported when an analog value returns to normal range from the low value.
| ||||
| !controlAlarm | 1.3.6.1.4.1.2011.6.1.2.0.9 | |||
notification · current The control alarm, reporting the environment monitoring unit ID. This trap message is reported when emu control operation fails.
| ||||
| !controlAlarmResume | 1.3.6.1.4.1.2011.6.1.2.0.10 | |||
notification · current The control alarm, reporting the environment monitoring unit ID. This trap message is reported when emu control operation resumes.
| ||||
| !digtalMeasureAlarm | 1.3.6.1.4.1.2011.6.1.2.0.11 | |||
notification · current The digital measure alarm, reporting the environment monitoring unit ID and the channel ID of the digital sensor. This trap message is reported when emu measure operation fails.
| ||||
| !digtaleasureAlarmResume | 1.3.6.1.4.1.2011.6.1.2.0.12 | |||
notification · current The digital measure alarm recovery, reporting the environment monitoring unit ID and the channel ID of the digital sensor. This trap message is reported when emu measure operation resumes.
| ||||
| !fanExistsAlarm | 1.3.6.1.4.1.2011.6.1.2.0.13 | |||
notification · current Fan nonexistance alarm. This trap message is reported when there is no fan device connected to control board.
| ||||
| !fanExistsAlarmResume | 1.3.6.1.4.1.2011.6.1.2.0.14 | |||
notification · current Fan nonexistance alarm recovery. This trap message is reported when there is a fan device connected to control board.
| ||||
| !fanRunStateAlarm | 1.3.6.1.4.1.2011.6.1.2.0.15 | |||
notification · current Fan running status alarm. This trap message is reported when the fan run state gets abnormal.
| ||||
| NenvConformance | 1.3.6.1.4.1.2011.6.1.3 | |||
| NenvCompliances | 1.3.6.1.4.1.2011.6.1.3.1 | |||
| NenvGroups | 1.3.6.1.4.1.2011.6.1.3.2 | |||
| NhwEnvironTraps | 1.3.6.1.4.1.2011.6.1.4 | |||
| NhwEnvironCommonTraps | 1.3.6.1.4.1.2011.6.1.4.1 | |||
| NhwEnvironCommonTrapsPrefix | 1.3.6.1.4.1.2011.6.1.4.1.0 | |||
| !hwEmmEmuAutofindTrap | 1.3.6.1.4.1.2011.6.1.4.1.0.1 | |||
notification · current The agent generates this trap when a new EMU autofind.
| ||||
| NhwEnvironAlarmTraps | 1.3.6.1.4.1.2011.6.1.4.2 | |||
| NhwEnvironEmuAlarmTraps | 1.3.6.1.4.1.2011.6.1.4.2.1 | |||
| NhwEnvironEmuAlarmTrapsPrefix | 1.3.6.1.4.1.2011.6.1.4.2.1.0 | |||
| !hwEmmEmufailTrap | 1.3.6.1.4.1.2011.6.1.4.2.1.0.1 | |||
notification · current The agent generates this trap when the communication of the EMU with the host is abnormal.
| ||||
| !hwEmmEmuRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.1.0.2 | |||
notification · current The agent generates this trap when the communication of the EMU with the host recovers.
| ||||
| !hwEmmEmuHardwareFaultTrap | 1.3.6.1.4.1.2011.6.1.4.2.1.0.3 | |||
notification · current The agent generates this trap when the following two faults occurs: 1. Power fault, which involves the following three scenarios: 1) Only one power board is installed on the MSAN. 2) Two power boards are detected on the device but only one power board is connected to the power supply. 3) Two power boards are detected on the device but one of them is faulty and cannot supply power. 2. Read temperature fault, which occurs when the fan temperature sensor is faulty. | ||||
| !hwEmmEmuHardwareRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.1.0.4 | |||
notification · current The agent generates this trap when the a Hardware exception Recover | ||||
| !hwEmmEmuAutofindFailTrap | 1.3.6.1.4.1.2011.6.1.4.2.1.0.5 | |||
notification · current The agent generates this trap when the emu autofind fail. | ||||
| !hwEmmEmuFanStateTrap | 1.3.6.1.4.1.2011.6.1.4.2.1.0.6 | |||
notification · current The agent generates this trap when the fan is not configured or fails.
| ||||
| !hwOpticalNodeFailTrap | 1.3.6.1.4.1.2011.6.1.4.2.1.0.7 | |||
notification · current The agent generates this trap when the communication of the OpticalNode with the host is abnormal.
| ||||
| !hwOpticalNodeRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.1.0.8 | |||
notification · current The agent generates this trap when the communication of the OpticalNode with the host recovers.
| ||||
| !hwOpticalReceiverPowerFailTrap | 1.3.6.1.4.1.2011.6.1.4.2.1.0.9 | |||
notification · current The agent generates this trap when the optical power of OpticalReceiver is abnormal. | ||||
| !hwOpticalReceiverPowerRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.1.0.10 | |||
notification · current The agent generates this trap when the optical power of OpticalReceiver recovers to normal range. | ||||
| !hwOpticalReceiverRFPowerFailTrap | 1.3.6.1.4.1.2011.6.1.4.2.1.0.11 | |||
notification · current The agent generates this trap when the RF power of OpticalReceiver is abnormal.
| ||||
| !hwOpticalReceiverRFPowerRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.1.0.12 | |||
notification · current The agent generates this trap when the RF power of OpticalReceiver recovers to normal range.
| ||||
| !hwOpticalTransmitterPowerFailTrap | 1.3.6.1.4.1.2011.6.1.4.2.1.0.13 | |||
notification · current The agent generates this trap when the optical power of OpticalTransmitter is abnormal. | ||||
| !hwOpticalTransmitterPowerRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.1.0.14 | |||
notification · current The agent generates this trap when the optical power of OpticalTransmitter recovers to normal range. | ||||
| !hwOpticalTransmitterBiasFailTrap | 1.3.6.1.4.1.2011.6.1.4.2.1.0.15 | |||
notification · current The agent generates this trap when the optical bias of OpticalTransmitter is abnormal.
| ||||
| !hwOpticalTransmitterBiasRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.1.0.16 | |||
notification · current The agent generates this trap when the optical bias of OpticalTransmitter recovers to normal range.
| ||||
| !hwOpticalDualChnProtectSwitchTrap | 1.3.6.1.4.1.2011.6.1.4.2.1.0.17 | |||
notification · current The agent generates this trap when the dual-channel optical occur protect-switch channel.
| ||||
| !hwOpticalReceiverDualChnPowerFailTrap | 1.3.6.1.4.1.2011.6.1.4.2.1.0.18 | |||
notification · current The agent generates this trap when the optical power of dual-channel OpticalReceiver is abnormal. | ||||
| !hwOpticalReceiverDualChnPowerRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.1.0.19 | |||
notification · current The agent generates this trap when the optical power of dual-channel OpticalReceiver recovers to normal range. | ||||
| !hwModuleOpticalTransmitterPowerFailTrap | 1.3.6.1.4.1.2011.6.1.4.2.1.0.20 | |||
notification · current The agent generates this trap when the optical power of OpticalTransmitter is abnormal. | ||||
| !hwModuleOpticalTransmitterPowerRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.1.0.21 | |||
notification · current The agent generates this trap when the optical power of OpticalTransmitter recovers to normal range. | ||||
| !hwModuleOpticalTransmitterBiasRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.1.0.22 | |||
notification · current The agent generates this trap when the optical bias of OpticalTransmitter recovers to normal range. | ||||
| !hwModuleOpticalTransmitterBiasFailTrap | 1.3.6.1.4.1.2011.6.1.4.2.1.0.23 | |||
notification · current The agent generates this trap when the optical bias of OpticalTransmitter is abnormal. | ||||
| !hwModuleOpticalCombinerRFPowerFailTrap | 1.3.6.1.4.1.2011.6.1.4.2.1.0.24 | |||
notification · current The agent generates this trap when the dual-channel OpticalReceiver use the combiner protect-switch channel policy and the RF power of dual-channel OpticalReceiver is abnormal. | ||||
| !hwModuleOpticalCombinerRFPowerRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.1.0.25 | |||
notification · current The agent generates this trap when the dual-channel OpticalReceiver use the combiner protect-switch channel policy and the RF power of dual-channel OpticalReceiver recovers to normal range . | ||||
| !hwEmmDoorLockCommFailTrap | 1.3.6.1.4.1.2011.6.1.4.2.1.0.26 | |||
notification · current The agent generates this trap when the door lock cannot communicate with the main board.
| ||||
| !hwEmmDoorLockCommRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.1.0.27 | |||
notification · current The agent generates this trap when the door lock recover to communicate with the main board.
| ||||
| !hwEmmDoorLockAbnormalUnlockTrap | 1.3.6.1.4.1.2011.6.1.4.2.1.0.28 | |||
notification · current The agent generates this trap when the the door lock is abnormal unlocked.
| ||||
| !hwEmmDoorLockAbnormalUnlockRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.1.0.29 | |||
notification · current The agent generates this trap when the the door lock recover to the normal state.
| ||||
| !hwOpticalModuleTypeMismatchTrap | 1.3.6.1.4.1.2011.6.1.4.2.1.0.30 | |||
notification · current The agent generates this trap when the type of the inserted optical receiver or transmitter does not match that supported by the slot. | ||||
| !hwOpticalModuleTypeMismatchRestoreTrap | 1.3.6.1.4.1.2011.6.1.4.2.1.0.31 | |||
notification · current The agent generates this trap when mismatch between the type of the optical receiver or transmitter and that supported by the slot is rectified. | ||||
| !hwEmmDoorLockOpenLockTrap | 1.3.6.1.4.1.2011.6.1.4.2.1.0.32 | |||
notification · current The agent generates this trap when the electronic lock is opened. | ||||
| !hwOpticalReceiverRfChangeFaultTrap | 1.3.6.1.4.1.2011.6.1.4.2.1.0.33 | |||
notification · current The agent generates this trap when the RF output power change exceeds the alarm threshold. | ||||
| !hwOpticalModuleAbsenceTrap | 1.3.6.1.4.1.2011.6.1.4.2.1.0.34 | |||
notification · current The agent generates this trap when the optical module plug out. | ||||
| NhwEnvironAnaAlarmTraps | 1.3.6.1.4.1.2011.6.1.4.2.2 | |||
| NhwEnvironAnaAlarmTrapsPrefix | 1.3.6.1.4.1.2011.6.1.4.2.2.0 | |||
| !hwEmmAnaUnnamedFaultTrap | 1.3.6.1.4.1.2011.6.1.4.2.2.0.1 | |||
notification · current The agent generates this trap when an unnamed analog alarm occurs. | ||||
| !hwEmmAnaUnnamedRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.2.0.2 | |||
notification · current The agent generates this trap when an unnamed analog alarm recovers. | ||||
| !hwEmmAnaTempFaultTrap | 1.3.6.1.4.1.2011.6.1.4.2.2.0.3 | |||
notification · current The agent generates this trap when the analog temperature alarm occurs. | ||||
| !hwEmmAnaTempRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.2.0.4 | |||
notification · current The agent generates this trap when the analog temperature alarm recovers. | ||||
| !hwEmmAnaHumyFaultTrap | 1.3.6.1.4.1.2011.6.1.4.2.2.0.5 | |||
notification · current The agent generates this trap when the analog humidity alarm occurs. | ||||
| !hwEmmAnaHumyRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.2.0.6 | |||
notification · current The agent generates this trap when the analog humidity alarm recovers. | ||||
| !hwEmmAnaVoltFaultTrap | 1.3.6.1.4.1.2011.6.1.4.2.2.0.7 | |||
notification · current The agent generates this trap when the analog voltage alarm occurs. | ||||
| !hwEmmAnaVoltRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.2.0.8 | |||
notification · current The agent generates this trap when the analog voltage alarm recovers. | ||||
| !hwEmmAnaCurrentFaultTrap | 1.3.6.1.4.1.2011.6.1.4.2.2.0.9 | |||
notification · current The agent generates this trap when the analog current alarm occurs. | ||||
| !hwEmmAnaCurrentRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.2.0.10 | |||
notification · current The agent generates this trap when the analog current alarm recovers. | ||||
| NhwEnvironDigAlarmTraps | 1.3.6.1.4.1.2011.6.1.4.2.3 | |||
| NhwEnvironDigAlarmTrapsPrefix | 1.3.6.1.4.1.2011.6.1.4.2.3.0 | |||
| !hwEmmDigFanBlockFaultTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.1 | |||
notification · current The agent generates this trap when the fan is blocked. | ||||
| !hwEmmDigFanBlockRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.2 | |||
notification · current The agent generates this trap when the fan is recovered from block. | ||||
| !hwEmmDigFanTempHighFaultTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.3 | |||
notification · current The agent generates this trap when the temperature of fan is too high. | ||||
| !hwEmmDigFanTempHighRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.4 | |||
notification · current The agent generates this trap when the temperature of fan recover from too high. | ||||
| !hwEmmDigUnnamedFaultTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.5 | |||
notification · current The agent generates this trap when a unnamed digital fault occurs. | ||||
| !hwEmmDigUnnamedRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.6 | |||
notification · current The agent generates this trap when a unnamed digital recovers. | ||||
| !hwEmmDigOutputswitchFaultTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.7 | |||
notification · current The agent generates this trap when Output switch digital fault occurs. | ||||
| !hwEmmDigOutputswitchRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.8 | |||
notification · current The agent generates this trap when Output switch digital recovers. | ||||
| !hwEmmDigAcvolFaultTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.11 | |||
notification · current The agent generates this trap when The AC voltage is out of the normal range. | ||||
| !hwEmmDigAcvolRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.12 | |||
notification · current The agent generates this trap when The AC voltage recovers to the normal range. | ||||
| !hwEmmDigAcswitchFaultTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.13 | |||
notification · current The agent generates this trap when The AC switch is out of the normal range. | ||||
| !hwEmmDigAcswitchRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.14 | |||
notification · current The agent generates this trap when The AC switch recovers to the normal range. | ||||
| !hwEmmDigBattvolFaultTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.15 | |||
notification · current The agent generates this trap when The batt vol is out of the normal range. | ||||
| !hwEmmDigBattvolRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.16 | |||
notification · current The agent generates this trap when The batt vol recovers to the normal range. | ||||
| !hwEmmDigBattfuseFaultTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.17 | |||
notification · current The agent generates this trap when The battery fuse is out of the normal range. | ||||
| !hwEmmDigBattfuseRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.18 | |||
notification · current The agent generates this trap when The battery fuse recovers to the normal range. | ||||
| !hwEmmDigLoadfuseFaultTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.19 | |||
notification · current The agent generates this trap when The load fuse is out of the normal range. | ||||
| !hwEmmDigLoadfuseRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.20 | |||
notification · current The agent generates this trap when The load fuse recovers to the normal range. | ||||
| !hwEmmDigRectifierFaultTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.21 | |||
notification · current The agent generates this trap when The Rectifier is out of the normal range. | ||||
| !hwEmmDigRectifierRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.22 | |||
notification · current The agent generates this trap when The Rectifier recovers to the normal range. | ||||
| !hwEmmDigDcpowerFaultTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.23 | |||
notification · current The agent generates this trap when The dc-power is out of the normal range. | ||||
| !hwEmmDigDcpowerRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.24 | |||
notification · current The agent generates this trap when The dc-power recovers to the normal range. | ||||
| !hwEmmDigRoomdoorFaultTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.25 | |||
notification · current The agent generates this trap when The Roomdoor is out of the normal range. | ||||
| !hwEmmDigRoomdoorRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.26 | |||
notification · current The agent generates this trap when The Roomdoor recovers to the normal range. | ||||
| !hwEmmDigTheftFaultTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.27 | |||
notification · current The agent generates this trap when The Roomdoor is out of the normal range. | ||||
| !hwEmmDigTheftRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.28 | |||
notification · current The agent generates this trap when The Roomdoor recovers to the normal range. | ||||
| !hwEmmDigWiringFaultTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.29 | |||
notification · current The agent generates this trap when The WIRING is out of the normal range. | ||||
| !hwEmmDigWiringRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.30 | |||
notification · current The agent generates this trap when The WIRING recovers to the normal range. | ||||
| !hwEmmDigFanFaultTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.31 | |||
notification · current The agent generates this trap when The FAN is out of the normal range. | ||||
| !hwEmmDigFanRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.32 | |||
notification · current The agent generates this trap when The FAN recovers to the normal range. | ||||
| !hwEmmDigFireFaultTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.33 | |||
notification · current The agent generates this trap when The Fire is out of the normal range. | ||||
| !hwEmmDigFireRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.34 | |||
notification · current The agent generates this trap when The Fire recovers to the normal range. | ||||
| !hwEmmDigFogFaultTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.35 | |||
notification · current The agent generates this trap when The Fog is out of the normal range. | ||||
| !hwEmmDigFogRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.36 | |||
notification · current The agent generates this trap when The Fog recovers to the normal range. | ||||
| !hwEmmDigWaterFaultTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.37 | |||
notification · current The agent generates this trap when The Water is out of the normal range. | ||||
| !hwEmmDigWaterRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.38 | |||
notification · current The agent generates this trap when The Water recovers to the normal range. | ||||
| !hwEmmDigDieselFaultTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.39 | |||
notification · current The agent generates this trap when The Diesel is out of the normal range. | ||||
| !hwEmmDigDieselRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.40 | |||
notification · current The agent generates this trap when The Diesel recovers to the normal range. | ||||
| !hwEmmDigSmellFaultTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.41 | |||
notification · current The agent generates this trap when The Smell is out of the normal range. | ||||
| !hwEmmDigSmellRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.42 | |||
notification · current The agent generates this trap when The Smell recovers to the normal range. | ||||
| !hwEmmDigAirconditionFaultTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.43 | |||
notification · current The agent generates this trap when The Air condition is out of the normal range. | ||||
| !hwEmmDigAirconditionRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.44 | |||
notification · current The agent generates this trap when The Air condition recovers to the normal range. | ||||
| !hwEmmDigArrsterFaultTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.45 | |||
notification · current The agent generates this trap when The arrester is out of the normal range. | ||||
| !hwEmmDigArrsterRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.46 | |||
notification · current The agent generates this trap when The arrester recovers to the normal range. | ||||
| !hwEmmDigDcvolFaultTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.47 | |||
notification · current The agent generates this trap when The DC VOL is out of the normal range. | ||||
| !hwEmmDigDcvolRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.48 | |||
notification · current The agent generates this trap when The DC VOL recovers to the normal range. | ||||
| !hwEmmFanCriticalBlockFaultTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.49 | |||
notification · current The agent generates this trap when more than two fans are blocked. | ||||
| !hwEmmFanCriticalBlockRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.50 | |||
notification · current The agent generates this trap when the critical multi-fan blocking recovers. | ||||
| !hwEmmDigitalSwitchOpenTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.51 | |||
notification · current The agent generates this trap when the 48V input switch is closed. | ||||
| !hwEmmDigitalSwitchCloseTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.52 | |||
notification · current The agent generates this trap when the 48V input switch is opened. | ||||
| !hwEmmDigFanSpeedAbnormalTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.53 | |||
notification · current The agent generates this trap when the fan rotation speed deteriorates. | ||||
| !hwEmmDigFanSpeedRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.54 | |||
notification · current The agent generates this trap when fan rotation speed deterioration recovers. | ||||
| !hwEmmDigAcInputPowerOffTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.55 | |||
notification · current The agent generates this trap when the AC power is off. | ||||
| !hwEmmDigAcInputPowerRecoverTrap | 1.3.6.1.4.1.2011.6.1.4.2.3.0.56 | |||
notification · current The agent generates this trap when the AC input power recovers. | ||||
| NhwEmmTrapVbOids | 1.3.6.1.4.1.2011.6.1.5 | |||
| ShwFanStatus | 1.3.6.1.4.1.2011.6.1.5.1 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current The status of the fan. Options: 1.notconfig(1) -The status of the fan is notconfig 2.failure(2) -The status of the fan is fail
| ||||
| ShwFailureCause | 1.3.6.1.4.1.2011.6.1.5.2 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current The reason of the auto-finding failure: Options: 1.fullemu(1) -No enough EMU IDs are available 2.emunotsupportautofind(2) -The EMU does not support the auto discovery function 3.shelfnotsupport(3) -The shelf does not support the EMU of this type 4.rpsrisfull(4) -RPSR of this frame already full 5.vescisfull(5) -VESC of this frame already full 6.fanisfull(6) -FAN of this frame already full
| ||||
| ShwEnvAutofindNodeId | 1.3.6.1.4.1.2011.6.1.5.3 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current The NodeId of the auto-found EMU. | ||||
| ShwEnvAutofindEmuType | 1.3.6.1.4.1.2011.6.1.5.4 | OCTET STRING | AN | |
scalar · OCTET STRING · accessible-for-notify · current The type of the auto-found EMU. | ||||
| ShwEnvAutofindBoardName | 1.3.6.1.4.1.2011.6.1.5.5 | OCTET STRING | AN | |
scalar · OCTET STRING · accessible-for-notify · current The board name of the auto-found EMU. | ||||
| ShwOROpticalPowerValueTrap | 1.3.6.1.4.1.2011.6.1.5.6 | OCTET STRING | AN | |
scalar · OCTET STRING · accessible-for-notify · current The optical power value of Optical receiver. | ||||
| ShwORRFPowerValueTrap | 1.3.6.1.4.1.2011.6.1.5.7 | OCTET STRING | AN | |
scalar · OCTET STRING · accessible-for-notify · current The RF power value of Optical receiver. | ||||
| ShwOTOpticalOutputPowerValueTrap | 1.3.6.1.4.1.2011.6.1.5.8 | OCTET STRING | AN | |
scalar · OCTET STRING · accessible-for-notify · current The optical power value of Optical transmitter. | ||||
| ShwUnlockMode | 1.3.6.1.4.1.2011.6.1.5.9 | OCTET STRING | AN | |
scalar · OCTET STRING · accessible-for-notify · current The mode of opening the lock. | ||||
| ShwUnlockSN | 1.3.6.1.4.1.2011.6.1.5.10 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current The series number of the unlocked event. | ||||
| ShwUnlockTime | 1.3.6.1.4.1.2011.6.1.5.11 | OCTET STRING | AN | |
scalar · OCTET STRING · accessible-for-notify · current The time when the unlocked event happened. | ||||
| ShwORRFPowerRefValueTrap | 1.3.6.1.4.1.2011.6.1.5.12 | OCTET STRING | AN | |
scalar · OCTET STRING · accessible-for-notify · current The RF power reference value of optical receiver. | ||||
| ShwORRFPowerChangeValueTrap | 1.3.6.1.4.1.2011.6.1.5.13 | OCTET STRING | AN | |
scalar · OCTET STRING · accessible-for-notify · current The RF power change value of optical receiver. | ||||
Traps / Notifications
- anaFaultAlarm
1.3.6.1.4.1.2011.6.1.2.0.3 - anaFaultAlarmResume
1.3.6.1.4.1.2011.6.1.2.0.4 - anaTooHighAlarm
1.3.6.1.4.1.2011.6.1.2.0.5 - anaTooHighAlarmResume
1.3.6.1.4.1.2011.6.1.2.0.6 - anaTooLowAlarm
1.3.6.1.4.1.2011.6.1.2.0.7 - anaTooLowAlarmResume
1.3.6.1.4.1.2011.6.1.2.0.8 - controlAlarm
1.3.6.1.4.1.2011.6.1.2.0.9 - controlAlarmResume
1.3.6.1.4.1.2011.6.1.2.0.10 - digtalMeasureAlarm
1.3.6.1.4.1.2011.6.1.2.0.11 - digtaleasureAlarmResume
1.3.6.1.4.1.2011.6.1.2.0.12 - envCommAlarm
1.3.6.1.4.1.2011.6.1.2.0.1 - envCommAlarmResume
1.3.6.1.4.1.2011.6.1.2.0.2 - fanExistsAlarm
1.3.6.1.4.1.2011.6.1.2.0.13 - fanExistsAlarmResume
1.3.6.1.4.1.2011.6.1.2.0.14 - fanRunStateAlarm
1.3.6.1.4.1.2011.6.1.2.0.15 - hwEmmAnaCurrentFaultTrap
1.3.6.1.4.1.2011.6.1.4.2.2.0.9 - hwEmmAnaCurrentRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.2.0.10 - hwEmmAnaHumyFaultTrap
1.3.6.1.4.1.2011.6.1.4.2.2.0.5 - hwEmmAnaHumyRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.2.0.6 - hwEmmAnaTempFaultTrap
1.3.6.1.4.1.2011.6.1.4.2.2.0.3 - hwEmmAnaTempRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.2.0.4 - hwEmmAnaUnnamedFaultTrap
1.3.6.1.4.1.2011.6.1.4.2.2.0.1 - hwEmmAnaUnnamedRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.2.0.2 - hwEmmAnaVoltFaultTrap
1.3.6.1.4.1.2011.6.1.4.2.2.0.7 - hwEmmAnaVoltRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.2.0.8 - hwEmmDigAcInputPowerOffTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.55 - hwEmmDigAcInputPowerRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.56 - hwEmmDigAcswitchFaultTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.13 - hwEmmDigAcswitchRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.14 - hwEmmDigAcvolFaultTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.11 - hwEmmDigAcvolRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.12 - hwEmmDigAirconditionFaultTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.43 - hwEmmDigAirconditionRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.44 - hwEmmDigArrsterFaultTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.45 - hwEmmDigArrsterRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.46 - hwEmmDigBattfuseFaultTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.17 - hwEmmDigBattfuseRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.18 - hwEmmDigBattvolFaultTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.15 - hwEmmDigBattvolRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.16 - hwEmmDigDcpowerFaultTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.23 - hwEmmDigDcpowerRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.24 - hwEmmDigDcvolFaultTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.47 - hwEmmDigDcvolRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.48 - hwEmmDigDieselFaultTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.39 - hwEmmDigDieselRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.40 - hwEmmDigFanBlockFaultTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.1 - hwEmmDigFanBlockRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.2 - hwEmmDigFanFaultTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.31 - hwEmmDigFanRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.32 - hwEmmDigFanSpeedAbnormalTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.53 - hwEmmDigFanSpeedRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.54 - hwEmmDigFanTempHighFaultTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.3 - hwEmmDigFanTempHighRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.4 - hwEmmDigFireFaultTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.33 - hwEmmDigFireRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.34 - hwEmmDigFogFaultTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.35 - hwEmmDigFogRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.36 - hwEmmDigLoadfuseFaultTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.19 - hwEmmDigLoadfuseRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.20 - hwEmmDigOutputswitchFaultTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.7 - hwEmmDigOutputswitchRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.8 - hwEmmDigRectifierFaultTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.21 - hwEmmDigRectifierRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.22 - hwEmmDigRoomdoorFaultTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.25 - hwEmmDigRoomdoorRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.26 - hwEmmDigSmellFaultTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.41 - hwEmmDigSmellRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.42 - hwEmmDigTheftFaultTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.27 - hwEmmDigTheftRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.28 - hwEmmDigUnnamedFaultTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.5 - hwEmmDigUnnamedRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.6 - hwEmmDigWaterFaultTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.37 - hwEmmDigWaterRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.38 - hwEmmDigWiringFaultTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.29 - hwEmmDigWiringRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.30 - hwEmmDigitalSwitchCloseTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.52 - hwEmmDigitalSwitchOpenTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.51 - hwEmmDoorLockAbnormalUnlockRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.1.0.29 - hwEmmDoorLockAbnormalUnlockTrap
1.3.6.1.4.1.2011.6.1.4.2.1.0.28 - hwEmmDoorLockCommFailTrap
1.3.6.1.4.1.2011.6.1.4.2.1.0.26 - hwEmmDoorLockCommRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.1.0.27 - hwEmmDoorLockOpenLockTrap
1.3.6.1.4.1.2011.6.1.4.2.1.0.32 - hwEmmEmuAutofindFailTrap
1.3.6.1.4.1.2011.6.1.4.2.1.0.5 - hwEmmEmuAutofindTrap
1.3.6.1.4.1.2011.6.1.4.1.0.1 - hwEmmEmuFanStateTrap
1.3.6.1.4.1.2011.6.1.4.2.1.0.6 - hwEmmEmuHardwareFaultTrap
1.3.6.1.4.1.2011.6.1.4.2.1.0.3 - hwEmmEmuHardwareRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.1.0.4 - hwEmmEmuRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.1.0.2 - hwEmmEmufailTrap
1.3.6.1.4.1.2011.6.1.4.2.1.0.1 - hwEmmFanCriticalBlockFaultTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.49 - hwEmmFanCriticalBlockRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.3.0.50 - hwModuleOpticalCombinerRFPowerFailTrap
1.3.6.1.4.1.2011.6.1.4.2.1.0.24 - hwModuleOpticalCombinerRFPowerRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.1.0.25 - hwModuleOpticalTransmitterBiasFailTrap
1.3.6.1.4.1.2011.6.1.4.2.1.0.23 - hwModuleOpticalTransmitterBiasRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.1.0.22 - hwModuleOpticalTransmitterPowerFailTrap
1.3.6.1.4.1.2011.6.1.4.2.1.0.20 - hwModuleOpticalTransmitterPowerRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.1.0.21 - hwOpticalDualChnProtectSwitchTrap
1.3.6.1.4.1.2011.6.1.4.2.1.0.17 - hwOpticalModuleAbsenceTrap
1.3.6.1.4.1.2011.6.1.4.2.1.0.34 - hwOpticalModuleTypeMismatchRestoreTrap
1.3.6.1.4.1.2011.6.1.4.2.1.0.31 - hwOpticalModuleTypeMismatchTrap
1.3.6.1.4.1.2011.6.1.4.2.1.0.30 - hwOpticalNodeFailTrap
1.3.6.1.4.1.2011.6.1.4.2.1.0.7 - hwOpticalNodeRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.1.0.8 - hwOpticalReceiverDualChnPowerFailTrap
1.3.6.1.4.1.2011.6.1.4.2.1.0.18 - hwOpticalReceiverDualChnPowerRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.1.0.19 - hwOpticalReceiverPowerFailTrap
1.3.6.1.4.1.2011.6.1.4.2.1.0.9 - hwOpticalReceiverPowerRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.1.0.10 - hwOpticalReceiverRFPowerFailTrap
1.3.6.1.4.1.2011.6.1.4.2.1.0.11 - hwOpticalReceiverRFPowerRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.1.0.12 - hwOpticalReceiverRfChangeFaultTrap
1.3.6.1.4.1.2011.6.1.4.2.1.0.33 - hwOpticalTransmitterBiasFailTrap
1.3.6.1.4.1.2011.6.1.4.2.1.0.15 - hwOpticalTransmitterBiasRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.1.0.16 - hwOpticalTransmitterPowerFailTrap
1.3.6.1.4.1.2011.6.1.4.2.1.0.13 - hwOpticalTransmitterPowerRecoverTrap
1.3.6.1.4.1.2011.6.1.4.2.1.0.14