HUAWEI-DLDP-MIB
HUAWEI Technology Co.,LtdV2.04, Modify node hwDldpNeighborNum, hwDldpNeighborNumResume.
snmptranslate -m HUAWEI-DLDP-MIB -Tpsnmpwalk -v2c -c <community> -m HUAWEI-DLDP-MIB <host> 1.3.6.1.4.1.2011.5.25.173Imports
| HUAWEI-MIB | hwDatacomm |
|---|---|
| IF-MIB | InterfaceIndex |
| P-BRIDGE-MIB | EnabledStatus |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IhwDldpMIB | 1.3.6.1.4.1.2011.5.25.173 | |||
identity V2.04, Modify node hwDldpNeighborNum, hwDldpNeighborNumResume. | ||||
| NhwDldpObjects | 1.3.6.1.4.1.2011.5.25.173.1 | |||
| NhwDldpConfiguration | 1.3.6.1.4.1.2011.5.25.173.1.1 | |||
| ShwDldpEnable | 1.3.6.1.4.1.2011.5.25.173.1.1.1 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current Globally enable or disable the DLDP configuration. If the hwDldpEnable is 1, DLDP is enabled. If the hwDldpEnable is 2, DLDP is disabled. By default, DLDP is disabled. | ||||
| ShwDldpUnidirectionalShutdown | 1.3.6.1.4.1.2011.5.25.173.1.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current When the device discovers a one-way link, the shutdown mode of port. The modes include auto and manual. By default, DLDP is auto.
| ||||
| ShwDldpWorkMode | 1.3.6.1.4.1.2011.5.25.173.1.1.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current It configures the work mode of the DLDP protocol, including normal and enhanced mode. By default, the mode is enhanced.
| ||||
| ShwDldpAdvertInterval | 1.3.6.1.4.1.2011.5.25.173.1.1.4 | Integer32 (1..100) | RW | |
scalar · Integer32 (1..100) · read-write · current Global interval for sending advertisement packets for the DLDP configuration. By default, the interval is 5s. | ||||
| ShwDelayDownTimer | 1.3.6.1.4.1.2011.5.25.173.1.1.5 | Integer32 (1..5) | RW | |
scalar · Integer32 (1..5) · read-write · current Global timeout of DelayDown timer. The value rangs from 1s to 5s, By default, the time is 1s. | ||||
| ShwDldpAuthenMode | 1.3.6.1.4.1.2011.5.25.173.1.1.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Global authentication mode of the DLDP configuration. It has three authentication modes, including none, md5, simple, and sha. By default the authentication mode is none.
| ||||
| ShwDldpMd5Password | 1.3.6.1.4.1.2011.5.25.173.1.1.7 | OCTET STRING (SIZE (1..24)) | RW | |
scalar · OCTET STRING (SIZE (1..24)) · read-write · current Global md5 password for authentication when authentication is md5. | ||||
| ShwDldpSimplePassword | 1.3.6.1.4.1.2011.5.25.173.1.1.8 | OCTET STRING (SIZE (1..16)) | RW | |
scalar · OCTET STRING (SIZE (1..16)) · read-write · current Global simple password for authentication when authentication is simple. | ||||
| ThwDldpPortTable | 1.3.6.1.4.1.2011.5.25.173.1.1.9 | NA | ||
table · not-accessible · current DLDP port configuration table. | ||||
| RhwDldpPortEntry | 1.3.6.1.4.1.2011.5.25.173.1.1.9.1 | NA | ||
| ChwDldpPortIndex | 1.3.6.1.4.1.2011.5.25.173.1.1.9.1.1 | PortIndex | NA | |
column · PortIndex · not-accessible · current It describes enabled DLDP port index. Each port is uniquely identified by a port number. It ranges from 0 to 575. | ||||
| ChwDldpPortStateReset | 1.3.6.1.4.1.2011.5.25.173.1.1.9.1.2 | TruthValue | RC | |
column · TruthValue · read-create · current It describes the DLDP status of the reset port. | ||||
| ChwDldpPortState | 1.3.6.1.4.1.2011.5.25.173.1.1.9.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Port state has eight states, including initial, inactive, active, advertisement, probe, disable, delayDown, and loop.
| ||||
| ChwDldpPortLinkState | 1.3.6.1.4.1.2011.5.25.173.1.1.9.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Port state has two modes, including up and down.
| ||||
| ChwDldpResetStatistics | 1.3.6.1.4.1.2011.5.25.173.1.1.9.1.5 | TruthValue | RC | |
column · TruthValue · read-create · current It clears the statistics of packets received and sent on the current port. | ||||
| ChwDldpRowStatus | 1.3.6.1.4.1.2011.5.25.173.1.1.9.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current Operation of CreateAndGo can be used to create a new instance, and operation of Destroy be used to destroy an existent index. But these operations will not take effect if they are not activated by running the command of activating or setting mib node of hwDldpEnable. | ||||
| ThwDldpNeighbourTable | 1.3.6.1.4.1.2011.5.25.173.1.1.10 | NA | ||
table · not-accessible · current DLDP Neighbour configuration table. | ||||
| RhwDldpNeighbourEntry | 1.3.6.1.4.1.2011.5.25.173.1.1.10.1 | NA | ||
row · not-accessible · current Entries of the DLDP Neighbour configuration table. | ||||
| ChwDldpNeighbourMacAddr | 1.3.6.1.4.1.2011.5.25.173.1.1.10.1.1 | MacAddress | NA | |
column · MacAddress · not-accessible · current When the activated port detects a neighbor, it can record the neighbor information, including MAC address of neighbor. The port may detect multiple neighbors. | ||||
| ChwDldpNeighbourPortIndex | 1.3.6.1.4.1.2011.5.25.173.1.1.10.1.2 | Integer32 (0..65535) | NA | |
column · Integer32 (0..65535) · not-accessible · current When the activated port detects a neighbor, it can record the port index of the neighbour. | ||||
| ChwDldpNeighbourPortName | 1.3.6.1.4.1.2011.5.25.173.1.1.10.1.3 | OCTET STRING (SIZE (0..255)) | RO | |
column · OCTET STRING (SIZE (0..255)) · read-only · current When the activated port detects a neighbor, it can record the port name of the neighbour. | ||||
| ChwDldpNeighbourState | 1.3.6.1.4.1.2011.5.25.173.1.1.10.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current When the activated port detects a neighbor, it can record the state of the neighbour, and its value includes unknown, one way, and two way.
| ||||
| ChwDldpNeighbourAgeTime | 1.3.6.1.4.1.2011.5.25.173.1.1.10.1.5 | Integer32 (3..300) | RO | |
column · Integer32 (3..300) · read-only · current When the activated port detects a neighbor, it can record the aging time of the neighbor. The aging time is three times the interval for sending advertisement packets. | ||||
| ThwDldpIfTable | 1.3.6.1.4.1.2011.5.25.173.1.1.11 | NA | ||
table · not-accessible · current DLDP interface configuration table. | ||||
| RhwDldpIfEntry | 1.3.6.1.4.1.2011.5.25.173.1.1.11.1 | NA | ||
| ChwDldpIfIndex | 1.3.6.1.4.1.2011.5.25.173.1.1.11.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current It describes enabled DLDP interface index. Each port is uniquely identified by a port number. It ranges from 0 to 62535. | ||||
| ChwDldpIfStateReset | 1.3.6.1.4.1.2011.5.25.173.1.1.11.1.2 | TruthValue | RC | |
column · TruthValue · read-create · current It describes the DLDP status of the reset port. | ||||
| ChwDldpIfState | 1.3.6.1.4.1.2011.5.25.173.1.1.11.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Port state has eight states, including initial, inactive, active, advertisement, probe, disable, delayDown, and loop.
| ||||
| ChwDldpIfLinkState | 1.3.6.1.4.1.2011.5.25.173.1.1.11.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Port state has two modes, including up and down.
| ||||
| ChwDldpIfResetStatistics | 1.3.6.1.4.1.2011.5.25.173.1.1.11.1.5 | TruthValue | RC | |
column · TruthValue · read-create · current It clears the statistics of packets received and sent on the current port. | ||||
| ChwDldpIfRowStatus | 1.3.6.1.4.1.2011.5.25.173.1.1.11.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current Operation of CreateAndGo can be used to create a new instance, and operation of Destroy be used to destroy an existent index. But these operations will not take effect if they are not activated by running the command of activating or setting mib node of hwDldpEnable. | ||||
| ThwDldpIfNeighbourTable | 1.3.6.1.4.1.2011.5.25.173.1.1.12 | NA | ||
table · not-accessible · current DLDP Neighbour configuration table. | ||||
| RhwDldpIfNeighbourEntry | 1.3.6.1.4.1.2011.5.25.173.1.1.12.1 | NA | ||
row · not-accessible · current Entries of the DLDP Neighbour configuration table. | ||||
| ChwDldpIfNeighbourMacAddr | 1.3.6.1.4.1.2011.5.25.173.1.1.12.1.1 | MacAddress | NA | |
column · MacAddress · not-accessible · current When the activated port detects a neighbor, it can record the neighbor information, including MAC address of neighbor. The port may detect multiple neighbors. | ||||
| ChwDldpIfNeighbourIfIndex | 1.3.6.1.4.1.2011.5.25.173.1.1.12.1.2 | Integer32 (0..65535) | NA | |
column · Integer32 (0..65535) · not-accessible · current When the activated port detects a neighbor, it can record the port index of the neighbour. | ||||
| ChwDldpIfNeighbourPortName | 1.3.6.1.4.1.2011.5.25.173.1.1.12.1.3 | OCTET STRING (SIZE (0..255)) | RO | |
column · OCTET STRING (SIZE (0..255)) · read-only · current When the activated port detects a neighbor, it can record the port name of the neighbour. | ||||
| ChwDldpIfNeighbourState | 1.3.6.1.4.1.2011.5.25.173.1.1.12.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current When the activated port detects a neighbor, it can record the state of the neighbour, and its value includes unknown, one way, and two way.
| ||||
| ChwDldpIfNeighbourAgeTime | 1.3.6.1.4.1.2011.5.25.173.1.1.12.1.5 | Integer32 (3..300) | RO | |
column · Integer32 (3..300) · read-only · current When the activated port detects a neighbor, it can record the aging time of the neighbor. The aging time is three times the interval for sending advertisement packets. | ||||
| ShwDldpShaPassword | 1.3.6.1.4.1.2011.5.25.173.1.1.13 | OCTET STRING (SIZE (1..16)) | RW | |
scalar · OCTET STRING (SIZE (1..16)) · read-write · current Global sha password for authentication when authentication is sha. | ||||
| NhwDldpStatistics | 1.3.6.1.4.1.2011.5.25.173.1.2 | |||
| ThwDldpPortStatisticsTable | 1.3.6.1.4.1.2011.5.25.173.1.2.1 | NA | ||
table · not-accessible · current DLDP port statics configuration table. | ||||
| RhwDldpPortStatisticsEntry | 1.3.6.1.4.1.2011.5.25.173.1.2.1.1 | NA | ||
row · not-accessible · current Entries of the table of the packets sent or received on the DLDP port.
| ||||
| ChwDldpPortStatisticsTx | 1.3.6.1.4.1.2011.5.25.173.1.2.1.1.1 | Counter32 | RO | |
column · Counter32 · read-only · current It describes the number of packets sent on the activated port. | ||||
| ChwDldpPortStatisticsRxTotal | 1.3.6.1.4.1.2011.5.25.173.1.2.1.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current It describes the number of packets received on the activated port. | ||||
| ChwDldpPortStatisticsRxError | 1.3.6.1.4.1.2011.5.25.173.1.2.1.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current It describes the number of error packets received on the activated port. | ||||
| ChwDldpPortStatisticsRxLoop | 1.3.6.1.4.1.2011.5.25.173.1.2.1.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current It describes the number of loop packets received on the activated port. | ||||
| ChwDldpPortStatisticsRxValid | 1.3.6.1.4.1.2011.5.25.173.1.2.1.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current It describes the number of valid packets received on the activated port. | ||||
| ChwDldpPortStatisticsRxAuthenFail | 1.3.6.1.4.1.2011.5.25.173.1.2.1.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current It describes the number of authentication failure packets received on the activated port. | ||||
| ThwDldpIfStatisticsTable | 1.3.6.1.4.1.2011.5.25.173.1.2.2 | NA | ||
table · not-accessible · current DLDP port statics configuration table. | ||||
| RhwDldpIfStatisticsEntry | 1.3.6.1.4.1.2011.5.25.173.1.2.2.1 | NA | ||
row · not-accessible · current Entries of the table of the packets sent or received on the DLDP port.
| ||||
| ChwDldpIfStatisticsTx | 1.3.6.1.4.1.2011.5.25.173.1.2.2.1.1 | Counter32 | RO | |
column · Counter32 · read-only · current It describes the number of packets sent on the activated port. | ||||
| ChwDldpIfStatisticsRxTotal | 1.3.6.1.4.1.2011.5.25.173.1.2.2.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current It describes the number of packets received on the activated port. | ||||
| ChwDldpIfStatisticsRxError | 1.3.6.1.4.1.2011.5.25.173.1.2.2.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current It describes the number of error packets received on the activated port. | ||||
| ChwDldpIfStatisticsRxLoop | 1.3.6.1.4.1.2011.5.25.173.1.2.2.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current It describes the number of loop packets received on the activated port. | ||||
| ChwDldpIfStatisticsRxValid | 1.3.6.1.4.1.2011.5.25.173.1.2.2.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current It describes the number of valid packets received on the activated port. | ||||
| ChwDldpIfStatisticsRxAuthenFail | 1.3.6.1.4.1.2011.5.25.173.1.2.2.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current It describes the number of authentication failure packets received on the activated port. | ||||
| NhwDldpPortTrapObjects | 1.3.6.1.4.1.2011.5.25.173.2 | |||
| ShwDldpTrapInterfaceIndex | 1.3.6.1.4.1.2011.5.25.173.2.1 | InterfaceIndex | AN | |
scalar · InterfaceIndex · accessible-for-notify · current It describes the interface index of the activated port that detected one way or found that two way is resumed. | ||||
| ShwDldpTrapIfName | 1.3.6.1.4.1.2011.5.25.173.2.2 | OCTET STRING (SIZE (0..64)) | AN | |
scalar · OCTET STRING (SIZE (0..64)) · accessible-for-notify · current It describes the interface name of the activated port that detected one way or found that two way is resumed. | ||||
| ShwDldpTrapFaultReason | 1.3.6.1.4.1.2011.5.25.173.2.3 | OCTET STRING (SIZE (0..64)) | AN | |
scalar · OCTET STRING (SIZE (0..64)) · accessible-for-notify · current It describes the reason interface fault. | ||||
| ShwDldpMaxNeighborNum | 1.3.6.1.4.1.2011.5.25.173.2.4 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current It describes the max number of global dldp neighbor . | ||||
| NhwDldpTraps | 1.3.6.1.4.1.2011.5.25.173.3 | |||
| !hwDldpUnidirectionalLink | 1.3.6.1.4.1.2011.5.25.173.3.1 | |||
notification · current Notify the NMS that the DLDP detected one way. The hwDldpTrapInterfaceIndex node is the interface index. | ||||
| !hwDldpLinkResume | 1.3.6.1.4.1.2011.5.25.173.3.2 | |||
notification · current Notify the NMS that the DLDP detected that unidirectional link was resumed. The hwDldpTrapInterfaceIndex node is interface index. | ||||
| !hwDldpLoopDetect | 1.3.6.1.4.1.2011.5.25.173.3.3 | |||
notification · current Notify the NMS that the DLDP detected Loop State. The hwDldpTrapInterfaceIndex node is the interface index. | ||||
| !hwDldpLoopResume | 1.3.6.1.4.1.2011.5.25.173.3.4 | |||
notification · current Notify the NMS that the DLDP detected Loop State was resumed. The hwDldpTrapInterfaceIndex node is interface index. | ||||
| !hwDldpNeighborNum | 1.3.6.1.4.1.2011.5.25.173.3.5 | |||
notification · current Notify the NMS that the number of DLDP neighbors reached the upper limit.
| ||||
| !hwDldpNeighborNumResume | 1.3.6.1.4.1.2011.5.25.173.3.6 | |||
notification · current Notify the NMS that the number of DLDP neighbors fell below 70% of the maximum supported by the device.
| ||||
| NhwDldpConformance | 1.3.6.1.4.1.2011.5.25.173.4 | |||
| NhwDldpCompliances | 1.3.6.1.4.1.2011.5.25.173.4.1 | |||
| MhwDldpCompliance | 1.3.6.1.4.1.2011.5.25.173.4.1.1 | |||
compliance · current The compliance statement for SNMP entities which implement the HUAWEI-DLDP-MIB. | ||||
| NhwDldpGroups | 1.3.6.1.4.1.2011.5.25.173.4.2 | |||
| GhwDldpConfigGroup | 1.3.6.1.4.1.2011.5.25.173.4.2.1 | |||
group · current The collection of objects which are used to configure the DLDP implementation behavior. This group is mandatory for agents which implement the DLDP. | ||||
| GhwDldpStatisticsGroup | 1.3.6.1.4.1.2011.5.25.173.4.2.2 | |||
group · current The collection of objects which are used to represent DLDP statistics. This group is mandatory for agents which implement the DLDP and have the capability of receiving and transmitting DLDP frames.
| ||||
| GhwDldpPortGroup | 1.3.6.1.4.1.2011.5.25.173.4.2.3 | |||
group · current The collection of objects indicates the information of port.
| ||||
| GhwDldpPortTrapGroup | 1.3.6.1.4.1.2011.5.25.173.4.2.4 | |||
group · current The collection of objects indicates that the activated port index detected one way or found that two way is resumed. | ||||
| GhwDldpTrapGroup | 1.3.6.1.4.1.2011.5.25.173.4.2.5 | |||
group · current The collection of notifications used to indicate that the HUAWEI-DLDP-MIB data is consistent and indicate the general status information. This group is mandatory for agents which implement the DLDP and have the capability of receiving DLDP frames. | ||||
Textual conventions
PortIndexInteger32 (0..575)Each port is uniquely identified by a port number. The port number ranges from 0 to 575.
Traps / Notifications
- hwDldpLinkResume
1.3.6.1.4.1.2011.5.25.173.3.2 - hwDldpLoopDetect
1.3.6.1.4.1.2011.5.25.173.3.3 - hwDldpLoopResume
1.3.6.1.4.1.2011.5.25.173.3.4 - hwDldpNeighborNum
1.3.6.1.4.1.2011.5.25.173.3.5 - hwDldpNeighborNumResume
1.3.6.1.4.1.2011.5.25.173.3.6 - hwDldpUnidirectionalLink
1.3.6.1.4.1.2011.5.25.173.3.1