HUAWEI-DEVICE-MIB
HUAWEI Technology Co.,LtdThe MIB module defines MIB objects which provide device management NMS interfaces.
snmptranslate -m HUAWEI-DEVICE-MIB -Tpsnmpwalk -v2c -c <community> -m HUAWEI-DEVICE-MIB <host> 1.3.6.1.4.1.2011.6.3Imports
| ENTITY-MIB | entPhysicalIndex |
|---|---|
| HCNUM-TC | CounterBasedGauge64 |
| HUAWEI-MIB | huaweiUtility |
| HUAWEI-TC-MIB | HWFrameType, HWPCBType, HWPortType, HWSubPCBType |
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddress, InetAddressPrefixLength, InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso, private |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IhwDev | 1.3.6.1.4.1.2011.6.3 | ||||||||||||
identity The MIB module defines MIB objects which provide device management NMS interfaces. | |||||||||||||
| NhwSystemPara | 1.3.6.1.4.1.2011.6.3.1 | ||||||||||||
| ShwSysIpAddr | 1.3.6.1.4.1.2011.6.3.1.1 | IpAddress | RW | 10.0.0.2 | |||||||||
scalar · IpAddress · read-write · current IP address of the system. It'd better not to modify this address when out-band NMS is used. It will take no effect to separately configure IP address or IP address mask. Example values from LibreNMS test devices
| |||||||||||||
| ShwSysIpMask | 1.3.6.1.4.1.2011.6.3.1.2 | IpAddress | RW | 255.255.255.0 | |||||||||
scalar · IpAddress · read-write · current IP address mask of the system. This object can take effect only when hwSysIpAddr is also set. Example values from LibreNMS test devices
| |||||||||||||
| ShwSysVersion | 1.3.6.1.4.1.2011.6.3.1.3 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The system software version format is consistent with the specification of HUAWEI product.For example, MA5600V800R008C00. | |||||||||||||
| ShwSysTime | 1.3.6.1.4.1.2011.6.3.1.4 | DateAndTime | RW | ||||||||||
scalar · DateAndTime · read-write · current This object is used for getting or setting current date and time of the system. | |||||||||||||
| ShwSysWorkMode | 1.3.6.1.4.1.2011.6.3.1.5 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current This object is used for obtaining the working mode of the UA5000.
Options:
1. amsanamsan(1) -indicates that the active and standby control boards are in position,
with the active control board of AMSAN and the standby control board of AMSAN
2. amsancmsan(2) -indicates that the active and standby control boards are in position,
with the active control board of AMSAN and the standby control board of CMSAN
3. cmsancmsan(3) -indicates that the active and standby control boards are in position,
with the active control board of CMSAN and the standby control board of CMSAN
4. cmsanamsan(4) -indicates that the active and standby control boards are in position,
with the active control board of CMSAN and the standby control board of AMSAN
5. amsanoffline(5) -indicates that the standby control board is not in position and the active
control board is AMSAN
6. cmsanoffline(6) -indicates that the standby control board is not in position and the active
control board is CMSAN
7. gmsangmsan(7) -indicates that the active and standby control boards are in position,
with the active control board of GMSAN and the standby control board of GMSAN
8: amsangmsan(8) -indicates that the active and standby control boards are in position,
with the active control board of AMSAN and the standby control board of GMSAN
9. gmsanamsan(9) -indicates that the active and standby control boards are in position,
with the active control board of GMSAN and the standby control board of AMSAN
10. cmsangmsan(10) -indicates that the active and standby control boards are in position,
with the active control board of CMSAN and the standby control board of GMSAN
11. gmsancmsan(11) -indicates that the active and standby control boards are in position,
with the active control board of GMSAN and the standby control board of CMSAN
12.gmsanoffline(12) -indicates that the standby control board is not in position and the active
control board is GMSAN
13.independent(13) -indicates that the working mode of the current subrack is independent
14.stack(14) -indicates that the working mode of the current subrack is stack
15. null(65536) -indicates that the system work mode is not set
| |||||||||||||
| ShwSysAverageBufferUsed | 1.3.6.1.4.1.2011.6.3.1.6 | Integer32 (0..100) | RO | ||||||||||
scalar · Integer32 (0..100) · read-only · current Query the average memory usage of the system. Collect the sum of the memory usage of all the boards that support memory query in the system, and then calculate the average value. The average value is the average memory usage of the system. | |||||||||||||
| ShwSysRsvedVlan | 1.3.6.1.4.1.2011.6.3.1.7 | Integer32 (2..4079) | RO | ||||||||||
scalar · Integer32 (2..4079) · read-only · current Describes the start VLAN ID of the reserved VLANs currently used by the system. Default: 4079 The system automatically uses the 15 VLANs starting from the configured start VLAN ID as reserved VLANs. | |||||||||||||
| ShwSysRsvedVlanDb | 1.3.6.1.4.1.2011.6.3.1.8 | Integer32 (2..4079) | RW | ||||||||||
scalar · Integer32 (2..4079) · read-write · current Describes the start VLAN ID of the reserved VLANs configured in the system. The configuration takes effect after system restart. Range: 2-4079 Default: 4079 The system automatically uses the 15 VLANs starting from the configured start VLAN ID as reserved VLANs. VLANs 4094 and 4095 are fixedly reserved, and VLAN 1 is the native VLAN. Therefore, these three VLANs cannot be configured as the reserved VLANs. | |||||||||||||
| ShwIopacketVersion | 1.3.6.1.4.1.2011.6.3.1.9 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The version information in the IO package, which is consistent with the system version information. | |||||||||||||
| ShwSysWorkScenario | 1.3.6.1.4.1.2011.6.3.1.10 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current System work scenario.
Used to identify whether the control board is in the upgrade(2)
or normal(1) scenario.
Options:
1. normal(1) -the normal scene of the system.
If the device need not provide seamless upgrade, set the scenario to normal(1).
If the scenario is changed from upgrade(2) to normal(1) and the standby control
board is in position, reset the standby control board.
2. upgrade(2)-the upgrade scene of the system.
When the device needs to provide seamless upgrade,
that is, the service is not interrupted during upgrade, set the scenario to upgrade(2).
If it is set to upgrade(2), you can perform operations related to upgrade only,
such as saving, loading, backup, active/standby switchover, system reset, and query.
| |||||||||||||
| ShwSysTemperatureHighThreshold | 1.3.6.1.4.1.2011.6.3.1.11 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current The threshold of the system. When you set a high temperature threshold, you also need to set a low temperature threshold. Range:40~105 The invalid value is 65535.If the threshold is not configured,the invalid value will be returned. | |||||||||||||
| ShwSysTemperatureLowThreshold | 1.3.6.1.4.1.2011.6.3.1.12 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current The threshold of the system. When you set a low temperature threshold, you also need to set a high temperature threshold. Range:-40~20 The invalid value is 65535.If the threshold is not configured,the invalid value will be returned. | |||||||||||||
| ShwSysExchangeMode | 1.3.6.1.4.1.2011.6.3.1.13 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current System Exchange-Mode,
Options:
1. backup(1) -indicates active/standby mode. Two control boards serve as the active and standby control
boards respectively. The switching chip of the active control board works independently
2. loadSharing(2) -indicates load sharing mode. The switching chips of the two control boards work
together to share the traffic
3. null(65536) -indicates system exchange mode is not set
| |||||||||||||
| ShwSysActivePatch | 1.3.6.1.4.1.2011.6.3.1.14 | OCTET STRING | RO | ||||||||||
scalar · OCTET STRING · read-only · current Display the information of the active patches in current system. | |||||||||||||
| ShwSysDeactivePatch | 1.3.6.1.4.1.2011.6.3.1.15 | OCTET STRING | RO | ||||||||||
scalar · OCTET STRING · read-only · current This object is used for querying the information about the deactivated patch in the current system. | |||||||||||||
| ShwSystemAutoConfigStatus | 1.3.6.1.4.1.2011.6.3.1.16 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current GE uplink software commissioning free configuration. Options: 1.enable(1) -the default value is enable 2.disable(2) -this object is no longer used
| |||||||||||||
| ShwSystemEnergySavingSwitch | 1.3.6.1.4.1.2011.6.3.1.17 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The energy-saving mode of system. Options: 1.basic(1) -when it is set to basic(1), the system energy saving mode is basic mode. 2.deep(2) -when it is set to deep(2), the system energy saving mode is deep mode. 3.optimal(3) -when it is set to optimal(3), the system energy saving mode is optimal mode. 4.standard(4) -when it is set to standard(4), the system energy saving mode is standard mode. The default value is basic(1).
| |||||||||||||
| ShwSysEncoding | 1.3.6.1.4.1.2011.6.3.1.18 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The encoding mode of characters in the system. Options: 1. default(1) -indicates that the encoding mode is no set 2. gbk(2) -indicates that the encoding mode of characters is gbk 3. iso88591(3) -indicates that the encoding mode of characters is iso8859-1 4. utf8(4) -indicates that the encoding mode of characters is utf-8 The value can be gbk(2), iso8859-1(3), or utf-8(4). Default: 1
| |||||||||||||
| ShwSysUpdateBoardVersion | 1.3.6.1.4.1.2011.6.3.1.19 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Update Board Version Options: 1.updateBoardVersion(1) -set operation only
| |||||||||||||
| ShwSysUpdateBoardMaxTimeLen | 1.3.6.1.4.1.2011.6.3.1.20 | Integer32 (1..24) | RW | ||||||||||
scalar · Integer32 (1..24) · read-write · current Update Board Version Max Time Len | |||||||||||||
| ShwSystemAdminStateMode | 1.3.6.1.4.1.2011.6.3.1.21 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current System admin state mode.
DEFVAL { private }
Options:
1.grStandard(1) -grStandard mode complies with GR series standard(such as GR-1093, used in North America).
2.private(2) -private mode,Huawei devices support.
| |||||||||||||
| ShwSystemAdminStatus | 1.3.6.1.4.1.2011.6.3.1.22 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The system admin status. Options: 1. nooperation(-1) -default state of the system. 2. is(1) -in service 3. oos(2) -out of service
| |||||||||||||
| ShwSystemPrimaryStatus | 1.3.6.1.4.1.2011.6.3.1.23 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The system primary status. Options: 1. isNr(1) -in Service, normal 2. isAnr(2) -in service, abnormal 3. isRst(3) -in service, restricted 4. isAnrst(4) -in service, abnormal & restricted 5. oosAu(5) -out of service, autonomous 6. oosMa(6) -out of service, management 7. oosAuma(7) -out of service, autonomous & management 8. oosAurst(8) -out of service, autonomous & restricted 9. oosMaanr(9) -out of service, management & abnormal
| |||||||||||||
| ShwDeviceArchType | 1.3.6.1.4.1.2011.6.3.1.24 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The hardware structure type of a device.
Currently, the hardware structure types of the existing versions are as follows:
Options:
1.arch1(1) -in MxUV8R305, the hardware structure type of the MA5620E, MA5620G, MA5626E, MA5626G, and MA5651(G) is arch1(1)
In MxUV8R306, hardware structure type of the MA5610 is arch1(1)
In MxUV8R307, hardware structure type of the MA5612, MA5620, and MA5626 is arch1(1)
2.arch2(2) -in MxUV8R306, the hardware structure type of the MA5616 and MA5652(G) is arch2(2)
3.arch3(3) -in MxUV8R308, hardware structure type of the MA5612, MA5620, MA5626, and MA5616 is arch3(3)
| |||||||||||||
| ShwUplinkSysIPAddr | 1.3.6.1.4.1.2011.6.3.1.25 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP address of the uplink system of PVM, it is only used when PVM worked in integrated mode and the IPM worked as the uplink board. | |||||||||||||
| ShwSysMainBoardTypeDesc | 1.3.6.1.4.1.2011.6.3.1.26 | OCTET STRING (SIZE (0..64)) | RO | ||||||||||
scalar · OCTET STRING (SIZE (0..64)) · read-only · current The mainboard description. | |||||||||||||
| ShwSysEnergySaving | 1.3.6.1.4.1.2011.6.3.1.27 | Bits | RW | ||||||||||
scalar · Bits · read-write · current The automatic energy saving function consists of seven sub-functions, which are indicated by bits .All bits are disabled by default. If
a bit is 0, the represented function is disabled.if a bit is 1, the represented function is enabled.This function is independent of the
energy saving function of the optical line terminal (OLT) products by powering off boards.
The energy saving bits flag:
1. esEnergySavingService(0) - indicates energy-saving-service-related features, include the feature of automatically unbinding
an extended profile.
2. esBoardAutoPowerOnOff(1) - indicates automatic power-off features on a board for energy saving, include the automatic
power-on and power-off feature on a board.
3. esPlatform(2) - indicates platform-related energy saving features, include energy saving on the
control board and upstream board.
4. esVector(3) - indicates vectoring-related energy saving features, include vectoring disabling feature.
5. esOpticalAccess(4) - indicates the optical access-related energy saving feature,and this object is reserved .
6. esCopperAccess(5) - indicates copper-access-related energy saving features,include MELT energy saving feature.
7. esInnovation(6) - indicates HuaWei's proprietary energy saving technologies,include the line driver(LD)
energy saving feature.
| |||||||||||||
| ShwSysSceneMode | 1.3.6.1.4.1.2011.6.3.1.28 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The device work scene. Options: 1. olt(1) -work in OLT scene 2. msan(3) -work in MSAN scene
| |||||||||||||
| ShwSysFtpXmlConfigure | 1.3.6.1.4.1.2011.6.3.1.29 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The state of XML file. Options: 1. useful(1) -Xml file is useful 2. useless(2) -Xml file is useless
| |||||||||||||
| ShwSysCentralizedMgmtPrimary | 1.3.6.1.4.1.2011.6.3.1.30 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The primary mode for centralized management. Options: 1. extendFrame(1) -Extended frame management 2. standAlone(2) -Stand alone management
| |||||||||||||
| ShwUpgradeVerifyVersion | 1.3.6.1.4.1.2011.6.3.1.31 | DisplayString | RO | SMU11BCV500R003C00SPC018 | |||||||||
scalar · DisplayString · read-only · current The system software version used in update scene for HUAWEI product.For example, MA5600V800R008C00. Example values from LibreNMS test devices
| |||||||||||||
| ShwDevLongitude | 1.3.6.1.4.1.2011.6.3.1.32 | Integer32 (-18000000..18000000 | 2147483647) | RW | ||||||||||
scalar · Integer32 (-18000000..18000000 | 2147483647) · read-write · current The longitude of the device. The value expands 100000 times and the value 2147483647 indicates invalid longitude. | |||||||||||||
| ShwDevLatitude | 1.3.6.1.4.1.2011.6.3.1.33 | Integer32 (-9000000..9000000 | 2147483647) | RW | ||||||||||
scalar · Integer32 (-9000000..9000000 | 2147483647) · read-write · current The latitude of the device. The value expands 100000 times and the value 2147483647 indicates invalid latitude. | |||||||||||||
| ShwDevElevation | 1.3.6.1.4.1.2011.6.3.1.34 | Integer32 (-32768..32767) | RW | ||||||||||
scalar · Integer32 (-32768..32767) · read-write · current The elevation of the device, in unit of meters. The value 32767 indicates invalid elevation. | |||||||||||||
| ShwDevHorizontalErr | 1.3.6.1.4.1.2011.6.3.1.35 | Unsigned32 (0..65535 | 4294967295) | RW | ||||||||||
scalar · Unsigned32 (0..65535 | 4294967295) · read-write · current The horizontal error of the device, in unit of meters. The value 4294967295 indicates invalid horizontal error. | |||||||||||||
| ShwDevAltitudeErr | 1.3.6.1.4.1.2011.6.3.1.36 | Unsigned32 (0..65535 | 4294967295) | RW | ||||||||||
scalar · Unsigned32 (0..65535 | 4294967295) · read-write · current The altitude error of the device, in unit of meters. The value 4294967295 indicates invalid altitude error. | |||||||||||||
| ShwDevAreaCode | 1.3.6.1.4.1.2011.6.3.1.37 | OCTET STRING (SIZE (0 | 12)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (0 | 12)) · read-write · current The area code of the device. The length of area code is 12. The characters can be 0, 1, 2, 3, 4, 5, 6, 7, 8 and 9. The zero-length string indicates invalid area code. | |||||||||||||
| ShwDevGisTimeStamp | 1.3.6.1.4.1.2011.6.3.1.38 | Unsigned32 (0..4294967295) | RW | ||||||||||
scalar · Unsigned32 (0..4294967295) · read-write · current The time stamp of the measurement signature, which is the number of seconds from 00:00 on January 1, 1970 to the current time. The value 4294967295 indicates invalid time stamp. | |||||||||||||
| ShwDevGisDigest | 1.3.6.1.4.1.2011.6.3.1.39 | OCTET STRING (SIZE (0 | 16)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (0 | 16)) · read-write · current The check value of the measurement signature. The length of check value is 16. The characters can be 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E and F. The zero-length string indicates invalid check value. | |||||||||||||
| ShwDevGisCheckCode | 1.3.6.1.4.1.2011.6.3.1.40 | OCTET STRING (SIZE (0 | 4)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (0 | 4)) · read-write · current The check code of the device GPS information. The length of check code is 4. The characters can be 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E and F. The zero-length string indicates invalid area check code. | |||||||||||||
| ShwSysSsdSwitch | 1.3.6.1.4.1.2011.6.3.1.41 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The secure software downloading status. Options: 1. enable(1) -The secure software downloading is enable 2. disable(2) -The secure software downloading is disable
| |||||||||||||
| ShwSysFtpMode | 1.3.6.1.4.1.2011.6.3.1.42 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current FTP connection mode. Options: 1. port(1) -Set the FTP connection mode to port. 2. passive(2) -Set the FTP connection mode to passive. Default: port(1)
| |||||||||||||
| ShwSysMarketScene | 1.3.6.1.4.1.2011.6.3.1.43 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The device options: 1. carrier(1) -Device work in carrier scene. 2. enterprise(2) -Device work in enterprise scene. Default: carrier(1)
| |||||||||||||
| ShwDeviceCountryCode | 1.3.6.1.4.1.2011.6.3.1.44 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current 1. china(1) -Device of china. 2. oversea(2) -Device of oversea. Default: oversea(2)
| |||||||||||||
| ShwSysDeviceNameMode | 1.3.6.1.4.1.2011.6.3.1.45 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current 1. simple(1) -Simplified device name. 2. detail(2) -Detailed device name. Default: simple(1)
| |||||||||||||
| ShwXponWorkMode | 1.3.6.1.4.1.2011.6.3.1.46 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The gpon work mode. Options: 1. gpon(1) -gpon workmode 2. combopon(2) -combopon workmode 3. invalid(3) -invalid value Default is combopon.
| |||||||||||||
| ShwVsManageMode | 1.3.6.1.4.1.2011.6.3.1.47 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Virtual system management mode. Options: 1. multiIP(1) -Set the virtual system multi-ip mode. 2. singleIP(2) -Set the virtual system single-ip mode. The default value multi-ip(1).
| |||||||||||||
| ShwSysIpv6Addr | 1.3.6.1.4.1.2011.6.3.1.48 | InetAddress | RO | ||||||||||
scalar · InetAddress · read-only · current IPV6 address of the system. | |||||||||||||
| ShwSysIpv6Mask | 1.3.6.1.4.1.2011.6.3.1.49 | InetAddressPrefixLength | RO | ||||||||||
scalar · InetAddressPrefixLength · read-only · current IPV6 Mask of the system. | |||||||||||||
| ShwSysFtpRemoteOverwrite | 1.3.6.1.4.1.2011.6.3.1.50 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Ftp overwrite remote file strategy. Options: 1. enable(1) -Overwrite remote file while file with the same name exists on the FTP server. 2. disable(2) -Do not overwrite remote file while file with the same name exists on the FTP server. The default value disable(2).
| |||||||||||||
| ShwSysSftpRemoteOverwrite | 1.3.6.1.4.1.2011.6.3.1.51 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Sftp overwrite remote file strategy. Options: 1. enable(1) -Overwrite remote file while file with the same name exists on the SFTP server. 2. disable(2) -Do not overwrite remote file while file with the same name exists on the SFTP server. The default value enable(1).
| |||||||||||||
| ShwWarrantyInfoProductCapability | 1.3.6.1.4.1.2011.6.3.1.52 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Whether the current product supports for warranty information. Options: 1. support(1) - indicates that the product is support 2. notsupport(2) - indicates that the product is not support
| |||||||||||||
| ShwSysSecConfig | 1.3.6.1.4.1.2011.6.3.1.53 | OCTET STRING (SIZE (0..1)) | RO | ||||||||||
scalar · OCTET STRING (SIZE (0..1)) · read-only · current Used only for CICM to collect security configuration data. | |||||||||||||
| ShwSystemRole | 1.3.6.1.4.1.2011.6.3.1.54 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current The current role in the network. | |||||||||||||
| ShwMiniSystemSwitch | 1.3.6.1.4.1.2011.6.3.1.55 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Mini system switch status. Options: 1. disable(0) -indicates that the mini-system switch is disable. 2. enable(1) -indicates that the mini-system switch is enable. The default value disable(0).
| |||||||||||||
| ShwSysEosTime | 1.3.6.1.4.1.2011.6.3.1.56 | DateAndTime | RO | ||||||||||
scalar · DateAndTime · read-only · current This object is used for getting eos date and time of the system. | |||||||||||||
| ShwSingleControlBoardMode | 1.3.6.1.4.1.2011.6.3.1.57 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Single control board mode switch status. Options: 1. disable(0) -indicates that the single control board mode is disable. 2. enable(1) -indicates that the single control board mode is enable. The default value disable(0).
| |||||||||||||
| ShwDevExtendedFrameTypes | 1.3.6.1.4.1.2011.6.3.1.58 | OCTET STRING (SIZE (0..1024)) | RO | ||||||||||
scalar · OCTET STRING (SIZE (0..1024)) · read-only · current Show the types of extended frame and main board supported by the system. | |||||||||||||
| ShwDeviceCountryCodeInfo | 1.3.6.1.4.1.2011.6.3.1.59 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The country code of mainboard. Options: 1. america(1) -Mainboard currently runs in America. 2. china(86) -Mainboard currently runs in China. 3. others(999) -Mainboard currently runs in other countrys.
| |||||||||||||
| ShwSysVersionVrcb | 1.3.6.1.4.1.2011.6.3.1.999 | DisplayString | RO | MA5603V800R018C10B085 | |||||||||
scalar · DisplayString · read-only · current The device MIB build version, used by NMS for MIB adaption. Example values from LibreNMS test devices
| |||||||||||||
| ThwNmsParaTable | 1.3.6.1.4.1.2011.6.3.2 | NA | |||||||||||
table · not-accessible · current The index of this table is hwNmsIndex. NMS parameters configuration table. This table is no longer used. | |||||||||||||
| RhwNmsParaEntry | 1.3.6.1.4.1.2011.6.3.2.1 | NA | |||||||||||
row · not-accessible · current The index of this entry is hwNmsIndex. NMS parameters configuration table. This table is no longer used.
| |||||||||||||
| ChwNmsIndex | 1.3.6.1.4.1.2011.6.3.2.1.1 | Integer32 (1..32) | RO | ||||||||||
column · Integer32 (1..32) · read-only · current Index(1..32),at most supports 32 NMSs, exclusively identifies an NMS. This object is no longer used. | |||||||||||||
| ChwNmsName | 1.3.6.1.4.1.2011.6.3.2.1.2 | OCTET STRING (SIZE (0..63)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..63)) · read-write · current Name of the NMS, which does not have to be consistent with that of the NMS workstation. This object is no longer used. | |||||||||||||
| ChwNmsIp | 1.3.6.1.4.1.2011.6.3.2.1.3 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current IP address of the NMS workstation that can be outband or inband address. This object is no longer used. | |||||||||||||
| ChwNmsMask | 1.3.6.1.4.1.2011.6.3.2.1.4 | IpAddress | RW | deprecated | |||||||||
column · IpAddress · read-write · deprecated IP address mask of the NMS workstation. This object is no longer used. | |||||||||||||
| ChwNmsMaintainMode | 1.3.6.1.4.1.2011.6.3.2.1.5 | INTEGER | RW | deprecated | |||||||||
column · INTEGER · read-write · deprecated Maintenance mode of NMS workstation. If the IP address of the NMS station is in-band, the mode must also be in-band. This object is no longer used. Options: 1.inBandwidth(1) -in Bandwidth 2.outBandwidth(2) -out Bandwidth
| |||||||||||||
| ChwNmsGetCommunity | 1.3.6.1.4.1.2011.6.3.2.1.6 | OCTET STRING (SIZE (0..31)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..31)) · read-write · current Community authentication name used for SNMP protocol GET operation, default value: public. This object is no longer used. | |||||||||||||
| ChwNmsSetCommunity | 1.3.6.1.4.1.2011.6.3.2.1.7 | OCTET STRING (SIZE (0..31)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..31)) · read-write · current Community authentication name used for SNMP protocol SET operation, default value: private. This object is no longer used. | |||||||||||||
| ChwNmsSnmpPort | 1.3.6.1.4.1.2011.6.3.2.1.8 | Integer32 | RW | deprecated | |||||||||
column · Integer32 · read-write · deprecated Snmp communication port of NMS workstation,default value:161. This object is no longer used. | |||||||||||||
| ChwNmsTrapPort | 1.3.6.1.4.1.2011.6.3.2.1.9 | Integer32 | RW | deprecated | |||||||||
column · Integer32 · read-write · deprecated Trap receive Port of NMS workstation, default value:162. This object is no longer used. | |||||||||||||
| ChwNmsClass | 1.3.6.1.4.1.2011.6.3.2.1.10 | INTEGER | RW | deprecated | |||||||||
column · INTEGER · read-write · deprecated Class of NMS station,default value is 3. This object is no longer used. Options: 1.ro(1) - read only 2.rw(2) - read write 3.rwWithTrap(3) - default value, read write with trap 4.trapOnly(4) - only with trap
| |||||||||||||
| ChwNmsStatus | 1.3.6.1.4.1.2011.6.3.2.1.11 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current Operation status of NMS station. The NMS station can be added,deleted and modified. This object is no longer used. | |||||||||||||
| NhwSlotConf | 1.3.6.1.4.1.2011.6.3.3 | ||||||||||||
| ThwFrameTable | 1.3.6.1.4.1.2011.6.3.3.1 | NA | |||||||||||
table · not-accessible · current This table describes basic chassis information. | |||||||||||||
| RhwFrameEntry | 1.3.6.1.4.1.2011.6.3.3.1.1 | NA | |||||||||||
row · not-accessible · current The index of this entry is hwFrameTable. Shelf description table that describes basic information of a shelf. You can obtain the shelf information, including the shelf type, number of slots, and the shelf running status, and the shelf management status.
| |||||||||||||
| ChwFrameIndex | 1.3.6.1.4.1.2011.6.3.3.1.1.1 | Integer32 (0..1024) | RO | 0 | |||||||||
column · Integer32 (0..1024) · read-only · current The index of a shelf in the device. Example values from LibreNMS test devices
| |||||||||||||
| ChwFrameType | 1.3.6.1.4.1.2011.6.3.3.1.1.2 | HWFrameType | RC | 0 | |||||||||
column · HWFrameType · read-create · current The type of a shelf, which can be obtained from HUAWEI-TC-MIB.mib. Example values from LibreNMS test devices
| |||||||||||||
| ChwFrameDesc | 1.3.6.1.4.1.2011.6.3.3.1.1.3 | OCTET STRING (SIZE (0..246)) | RC | ||||||||||
column · OCTET STRING (SIZE (0..246)) · read-create · current The description about the frame. It is used to describe some extra information. For convenient management, you can set the location of the room in which the shelf is located as the description. | |||||||||||||
| ChwSlots | 1.3.6.1.4.1.2011.6.3.3.1.1.4 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of physical slots in the shelf. | |||||||||||||
| ChwFrameOperStatus | 1.3.6.1.4.1.2011.6.3.3.1.1.5 | INTEGER | RO | normal(1) | |||||||||
column · INTEGER · read-only · current The operation status of frame. Options: 1. normal(1) -indicates that the shelf is running normally 2. fault(2) -indicates that the shelf is faulty 3. other(3) -indicates that the shelf is in a state other than the previous three states 4. discovery(4)-indicates that the shelf is in the auto discovery state and is to be activated 5. mismatch(5) -indicates that the shelf type is inconsistent with the configuration in the database of device 6. offline(6) -indicates that the shelf is offline or the link of the shelf is down
Example values from LibreNMS test devices
| |||||||||||||
| ChwFrameAdminStatus | 1.3.6.1.4.1.2011.6.3.3.1.1.6 | INTEGER | RC | 0 | |||||||||
column · INTEGER · read-create · current The administration status of frame.
Options:
1. nooperation(-1) - default state of the system
2. disable(1) - indicates that the frame administration state is disable
3. enable(2) - indicates that the frame administration state is enable
4. reset(3) - reset the shelf. If you need to reset the shelf immediately,
perform the operation only. If you need to reset the shelf after a certain period,
you also need to set hwFrameResetTimeout.
If you need to reset the control shelf, the entire system is reset;
otherwise, the control board in the specified shelf is reset
5. test(4) - test the frame
6. confirm(5) - confirm the frame
7. delete(6) - delete the frame info
8. batchconfirm(7) - confirm the boards in a shelf in batches
9. bind(8) - bind ont serial number with the extended frame ID
10. resetwithoutloadeddata(9) - reset the shelf without newly loaded database.
If you need to reset the shelf immediately, perform the operation only.
If you need to reset the shelf after a certain period, you also need to set hwFrameResetTimeout.
If you need to reset the control shelf, the entire system is reset;
otherwise, the control board in the specified shelf is reset
Example values from LibreNMS test devices
| |||||||||||||
| ChwFrameRowStatus | 1.3.6.1.4.1.2011.6.3.3.1.1.7 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The device that supports the slave shelf allows you to add a shelf (createAndGo(4)) and delete a shelf (destroy(6)) only. The device that does not support the slave shelf and does not support the setting operation. | |||||||||||||
| ChwBackplaneVersion | 1.3.6.1.4.1.2011.6.3.3.1.1.8 | OCTET STRING (SIZE (0..255)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..255)) · read-only · current Backplane board version information. Use the new-line character \n (ACSII 0x0A) to space various version information. It mainly contains the following information: Hardware PCB version \n MAB version \n Board Type \n | |||||||||||||
| ChwBackplanePhySerialNum | 1.3.6.1.4.1.2011.6.3.3.1.1.9 | OCTET STRING (SIZE (0..32)) | RO | 020LGJT0G4020681 | |||||||||
column · OCTET STRING (SIZE (0..32)) · read-only · current The vendor-specific serial number string for the physical entity. The preferred value is the serial number string actually printed on the component itself. Example values from LibreNMS test devices
| |||||||||||||
| ChwFrameResetTimeout | 1.3.6.1.4.1.2011.6.3.3.1.1.10 | Integer32 (-1 | 2..600) | RW | ||||||||||
column · Integer32 (-1 | 2..600) · read-write · current Used to set the delay time of shelf reset, in unit of seconds. When you set hwFrameResetTimeout, you also need to set hwFrameAdminStatus to reset(3) or resetwithoutloadeddata(9). If the shelf resetting fails, the device tries again in three seconds, until the resetting is successful or the number of resetting attempts exceeds the maximum. Initial value is -1. | |||||||||||||
| ChwFrameCLEICode | 1.3.6.1.4.1.2011.6.3.3.1.1.11 | OCTET STRING (SIZE (0..640)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..640)) · read-only · current Frame CLEI Code (COMMON LANGUAGE Location Identifier Code): Used to identify the location and the type of a telecommunication device. For the definition of the CLEI Code, refer to the GR-485. | |||||||||||||
| ChwFrameTypeName | 1.3.6.1.4.1.2011.6.3.3.1.1.12 | OCTET STRING | RO | H801MABO | |||||||||
column · OCTET STRING · read-only · current Frame information description, to describe name information of the frame. Example values from LibreNMS test devices
| |||||||||||||
| ChwFrameExtendPort | 1.3.6.1.4.1.2011.6.3.3.1.1.13 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The extending port of main frame which is used to connect extended frame. | |||||||||||||
| ChwFrameUplinkPort | 1.3.6.1.4.1.2011.6.3.3.1.1.14 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The uplink port of extended frame. | |||||||||||||
| ChwFrameRackID | 1.3.6.1.4.1.2011.6.3.3.1.1.15 | Integer32 (0..65535) | RW | ||||||||||
column · Integer32 (0..65535) · read-write · current Indicates the ID of the rack. | |||||||||||||
| ChwFrameExtendingSubId | 1.3.6.1.4.1.2011.6.3.3.1.1.16 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Sub ID of extending frame. If extend type is ETH, sub ID is 0xffffffff, it is invalid. If extend type is GPON, sub ID is ont ID, it is valid. | |||||||||||||
| ChwFrameExtendType | 1.3.6.1.4.1.2011.6.3.3.1.1.17 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The type of extended frame connecting to the main frame, its value is the same as the ifType of the extending port. | |||||||||||||
| ChwFrameHardwareDesc | 1.3.6.1.4.1.2011.6.3.3.1.1.18 | OCTET STRING (SIZE (0..510)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..510)) · read-only · current Hardware description of frame. | |||||||||||||
| ChwFrameGponDeviceSn | 1.3.6.1.4.1.2011.6.3.3.1.1.19 | OCTET STRING (SIZE (0..8)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..8)) · read-write · current ONT serial number. The valid length of the serial number is 8, and 0 indicates that the node is not set. | |||||||||||||
| ChwFramePhySerialNum | 1.3.6.1.4.1.2011.6.3.3.1.1.20 | OCTET STRING (SIZE (0..32)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-write · current The vendor-specific serial number string for the physical entity. The preferred value is the serial number string actually printed on the component itself. | |||||||||||||
| ChwFrameFanAlarm | 1.3.6.1.4.1.2011.6.3.3.1.1.21 | Bits | RO | ||||||||||
column · Bits · read-only · current This MIB node is used to query the alarm status of the fan in the extended frame, which is represented by bits.
Functions of each bit are as follows:
1: faSupportQuery(0) - indicates whether query of the alarm status of the fan in the extended frame is supported.
If this bit is 0, the query is supported. If this bit is 1, the query is not supported. When the extended frame
is normal and reports the fan alarm status to the main frame, the query is supported. In other cases, the query is not supported.
2: faFanState(1) - indicates the communication status of the fan in the extended frame. If this bit is 0, the communication is normal.
If this bit is 1, the communication is abnormal. If the communication is abnormal, the value of faFanBlockState(2) and faFansBlockState(3) are invalid,
user do not have to pay attention to them.
3: faFanBlockState(2) - indicates whether a single fan in the extended frame is blocked. If this bit is 0, no single fan is blocked.
If this bit is 1, a single fan is blocked.
4: faFansBlockState(3) - indicates whether multiple fans in the extended frame are blocked. If this bit is 0, no multiple fans are blocked.
If this bit is 1, multiple fans are blocked.
| |||||||||||||
| ChwFrameMacAddress | 1.3.6.1.4.1.2011.6.3.3.1.1.22 | OCTET STRING (SIZE (0..20)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..20)) · read-only · current The remote frame mac address, and its format is XX-XX-XX-XX-XX-XX. For local frame, the value is invalid. | |||||||||||||
| ChwLpuSlotNums | 1.3.6.1.4.1.2011.6.3.3.1.1.23 | Integer32 (0..16) | RO | ||||||||||
column · Integer32 (0..16) · read-only · current Number of LPUs supported by the device. | |||||||||||||
| ChwFrameCreateTime | 1.3.6.1.4.1.2011.6.3.3.1.1.25 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current This object is used for getting the time of adding or creating a frame. | |||||||||||||
| ChwFrameQueryAssit | 1.3.6.1.4.1.2011.6.3.3.1.1.65536 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of assist frame of this frame. | |||||||||||||
| ThwSlotTable | 1.3.6.1.4.1.2011.6.3.3.2 | NA | |||||||||||
table · not-accessible · current This table describes board information. | |||||||||||||
| RhwSlotEntry | 1.3.6.1.4.1.2011.6.3.3.2.1 | NA | |||||||||||
row · not-accessible · current The board description table, used to manage the running status of boards and board information, such as description of boards, daughter board quantity and board type. The indexes of this entry are hwFrameIndex and hwSlotIndex. For the hwFrameIndex object, refer to hwFrameTable. For example, 0.2 indicates that the board is in slot 2, shelf 0.
| |||||||||||||
| ChwSlotIndex | 1.3.6.1.4.1.2011.6.3.3.2.1.1 | Integer32 (0..255) | RO | 0 | |||||||||
column · Integer32 (0..255) · read-only · current A slot index is used to identify the location of a board in a shelf. You can locate a board in a shelf according to hwFrameIndex and hwSlotIndex. For the hwFrameIndex object, refer to hwFrameTable. | |||||||||||||
| ChwSlotType | 1.3.6.1.4.1.2011.6.3.3.2.1.2 | HWPCBType | RC | 0 | |||||||||
column · HWPCBType · read-create · current Board type, which is defined in HUAWEI-TC-MIB.mib. The board type supported by a slot varies. For example, a slot can be inserted with a power board only, but certain slots can be inserted with voice service boards and broadband service boards. When adding a board by using the hwSlotRowStatus, you need to specify the board information such as board type and slot number. When adding a board, you need to check whether the board can be inserted in the specified slot. Example values from LibreNMS test devices
| |||||||||||||
| ChwSlotDesc | 1.3.6.1.4.1.2011.6.3.3.2.1.3 | OCTET STRING (SIZE (0..64)) | RC | ||||||||||
column · OCTET STRING (SIZE (0..64)) · read-create · current The description about the board, providing additional information about a board for users. For example, you can set the services supported by the board as the description. | |||||||||||||
| ChwSlotPcbVersion | 1.3.6.1.4.1.2011.6.3.3.2.1.4 | OCTET STRING (SIZE (0..64)) | RO | deprecated | |||||||||
column · OCTET STRING (SIZE (0..64)) · read-only · deprecated The PCB version information of the board. It has been discarded. The information of PCB version and other versions are described in the hwSlotVersion. | |||||||||||||
| ChwSlotVersion | 1.3.6.1.4.1.2011.6.3.3.2.1.5 | OCTET STRING (SIZE (0..640)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..640)) · read-only · current The version information about the board. Refer to the technical specifications of Huawei Technologies Co., Ltd. Use the new-line character \n (ACSII 0x0A) to space various version information. If there is no corresponding version, the new-line character shall also be inserted to remain the order. Detailed order information: Hardware PCB version \n Software version \n Logic version \n DSP version \n Standby CPU software version \n Chip version \n Other software version of the chip with a software \n Other version information \n The version information may have a slight difference according to different types of boards. For example, the standby CPU software version is not displayed for certain boards. | |||||||||||||
| ChwSlotWorkMode | 1.3.6.1.4.1.2011.6.3.3.2.1.6 | INTEGER | RW | main(1) | |||||||||
column · INTEGER · read-write · current Board working mode that describes whether the board is working in main state or in standby with loadshare, nullbackup, voice, satop state. Options: 1. main(1) - indicates that the active control board, supporting the get operation only 2. standby(2) - indicates that the standby control board, supporting the get operation only 3. loadshare(3) - indicates that the board working mode is load sharing 4. nullbackup(4) - indicates that the board working mode is backup 5. voice(5) - indicates to get and set the working mode of an EDT service board 6. satop(6) - indicates to get and set the working mode of an EDT service board or TOPB service board 7. pots(7) - indicates to get and set the working mode of an VDM service board 8. isdn(8) - indicates to get and set the working mode of an VDM service board 9. bonding(9) - indicates to get and set the working mode of an ADP service board 10. retransmission(10) - indicates to get and set the working mode of an ADP service board 11. nativetdm(11) - indicates to get and set the working mode of a TOPB service board 12. other(255) - indicates other working mode An EDT service board can be running either in voice mode, that is, voice(5), or in broadband mode, that is, satop(6). Setting the working mode of the EDT service board causes board resetting. An VDM service board can be running either in pots mode, that is, pots(7), or in isdn mode, that is, isdn(8). Setting the working mode of the VDM service board causes board resetting. Setting the board working mode may cause board resetting. When you are setting the working mode, you cannot set hwSlotAdminStatus or hwSlotRowStatus at the same time.
Example values from LibreNMS test devices
| |||||||||||||
| ChwSubSlots | 1.3.6.1.4.1.2011.6.3.3.2.1.7 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of sub boards supported by the board. | |||||||||||||
| ChwSlotOperStatus | 1.3.6.1.4.1.2011.6.3.3.2.1.8 | INTEGER | RO | normal(2) | |||||||||
column · INTEGER · read-only · current The running status of a board.
Options:
1. null(1) -indicates that the board is null
2. normal(2) -indicates that the board is running normally
3. fault(3) -indicates that the board is faulty but in position
4. forbidden(4) -indicates that the board is in position but disabled
5. autofind(5) -indicates that the board is in the autofind state. If a board is added through
hwSlotRowStatus and the board is not confirmed, the board is in the autofind state.
If a board is inserted in an idle slot, after the report of automatic registration,
the board is also in the autofind state
6. config(6) -indicates that the board is in the configuration state.
After a board that is in the auto discovery.
state is confirmed, data needs to be configured on the board.
The board is in the configuration state during data configuration.
After a board is successfully configured, its status is changed from config(6)
to normal(2). If the configuration fails, the board status is changed from config(6) to fault(3)
7. offline(7) -indicates that the board is faulty and is not in position
8. abnormal(8) -indicates that the board is abnormal
9. versionerr(9) -indicates that the board version is error
10. autoload(10) -indicates that the board is in the auto loading state. If detecting a software update,
the board automatically loads the update. If a board is in the auto loading state,
resetting or disabling the board may fail
11. outofservice(11) -indicates that the board is out of service
12. graceful(12) -indicates that the board running state is graceful
13. shutdown(13) -indicates that the board is in the shutdown state.
14. energysavingshutdown(14) -used for system energy saving. Reference to hwSysEnergySaving node for more detail.
15. hightempshutdown(15) -when the temperature of a board exceeds the high temperature threshold,
the board is powered off in order to protect the board
16. manualshutdown(16) -services on certain boards can be recovered only after restart of the board.
You can manually power off the board.
Then, the board is in the manual shutdown state
17. mismatch(17) -when a board inserted in a slot is inconsistent with the configuration saved in the system,
the board is in the mismatch(17) state
18. acoffshutdown(18) -used to protect system when there is no AC Power.
19. highpowershutdown(19) -used to protect system when the current maximum power consumption of the
system exceeds the maximum power supply capability
20. isolated(20) -used to indicates that the board is in isolated state
Certain products use the power saving features, energysavingshutdown(14), hightempshutdown(15),
manualshutdown(16),acoffshutdown(18),highpowershutdown(19) to distinguish the shutdown causes.
For outofservice(11), graceful(12), refer to hwSlotEndServiceMode.
Example values from LibreNMS test devices
| |||||||||||||
| ChwSlotAdminStatus | 1.3.6.1.4.1.2011.6.3.3.2.1.9 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Board status management.
This object cannot be set simultaneously with hwSlotRowStatus or hwSlotWorkMode.
Options:
1. nooperation(-1) -default state of the system
2. disable(1) -disable the running of a board
3. enable(2) -enable the running of a board
4. reset(3) -reset a board
5. test(4) -test a board
6. confirm(5) -confirm the board in the discovery(5) state in hwSlotOperStatus
After the operation, the board is in the config state
7. switch(6) -main board switchover on access network UA device
8. delete(7) -delete a board
9. forbidden(8) -forbid a board
10.unforbidden(9) -permit a board
11.endservice(10) -used in the exit delay of a board
12.startservice(11) -used in the exit delay of a board
13.poweron(12) -used to power on a board
14.poweroff(13) -used to power off a board
15.is(14) -in service
16.oos(15) -out of service
17.hotreset(16) -hotreset a board
| |||||||||||||
| ChwSlotRowStatus | 1.3.6.1.4.1.2011.6.3.3.2.1.10 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current Supported setting operations are createAndGo(4) and destroy(6).
Options:
1. CreateAndGo(4) - When adding a board in offline mode, you must set the hwSlotType object at
the same time. The hwSlotType object must support offline adding.
After you add a board in offline mode on the NMS, if adding a daughter board is supported,
you can also add a daughter board. See hwSubslotAdminStatus in hwSubslotTable.
2. Destroy(6) - Used to delete a board. | |||||||||||||
| ChwSlotPhySerialNum | 1.3.6.1.4.1.2011.6.3.3.2.1.11 | OCTET STRING (SIZE (0..32)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-only · current The vendor-specific serial number string for the board. The preferred value is the serial number string actually printed on the component itself. | |||||||||||||
| ChwSlotShutdownState | 1.3.6.1.4.1.2011.6.3.3.2.1.12 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Shutdown state of the board. Options: 1. powerOffState(1) -indicates the power-off state 2. powerOnState(2) -indicates the power-on state This object is no longer used.
| |||||||||||||
| ChwSlotTemperature | 1.3.6.1.4.1.2011.6.3.3.2.1.13 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The temperature of the board. (Unit:centigrade) The value 0X7FFFFFFF indicates invalid temperature.
| |||||||||||||
| ChwSlotUpdateVersion | 1.3.6.1.4.1.2011.6.3.3.2.1.14 | OCTET STRING (SIZE (0..32)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-only · current The message is reported if the current version of a board is inconsistent with the version saved in the flash memory. The contents of the message are as follows: Current BIOS version of the board 3 bytes BIOS version of the board in the flash 3 bytes Current software version of the board 3 bytes Software version of the board in the flash memory 3 bytes | |||||||||||||
| ChwSlotAdminForceOOSTime | 1.3.6.1.4.1.2011.6.3.3.2.1.15 | Integer32 (1..1440) | RC | deprecated | |||||||||
column · Integer32 (1..1440) · read-create · deprecated The timeout time before forcing to quit service of the board, in unit of minutes. Range: 1-1440 Default: 0 Unit: minutes
| |||||||||||||
| ChwSlotForceOOSTime | 1.3.6.1.4.1.2011.6.3.3.2.1.16 | Integer32 (0..86400) | RO | deprecated | |||||||||
column · Integer32 (0..86400) · read-only · deprecated The remain time of the forcing to out of service. Unit:Minute | |||||||||||||
| ChwSlotAdminForceOOSTimeoutWorkMode | 1.3.6.1.4.1.2011.6.3.3.2.1.17 | INTEGER | RC | deprecated | |||||||||
column · INTEGER · read-create · deprecated The handling after the timeout time elapses when a board delays in quitting service.
Options:
1. forced(1) - force to handle
2. cancel(2) - cancel handling
| |||||||||||||
| ChwSlotEndServiceMode | 1.3.6.1.4.1.2011.6.3.3.2.1.18 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current The mode in which a board quits service. Options: 1. immediate(1) -quit service immediately 2. graceful(2) -quit service later
| |||||||||||||
| ChwSlotCLEICode | 1.3.6.1.4.1.2011.6.3.3.2.1.19 | OCTET STRING (SIZE (0..640)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..640)) · read-only · current Card CLEI Code(COMMON LANGUAGE Location Identifier Code): Used to identify the location and the type of a telecommunication device. For the definition of the CLEI Code, refer to the GR-485. | |||||||||||||
| ChwSlotNetworkRole | 1.3.6.1.4.1.2011.6.3.3.2.1.20 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Indicates the network role of a board. Options: 1. cascade(1) -indicates the subtending side, which is used for subtending and capturing certain protocol packets 2. network(2) -indicates the network side, which is used for upstream transmission 3. user(3) -indicates the user side, which is used for creating the service port 4. extend(4) -indicates the extend side, which is used for connecting to the extended frame 5. stack(5) -indicates the stack side, which is used for creating the stack port 6. invalid(255)-indicates the invalid value
| |||||||||||||
| ChwSlotTypeName | 1.3.6.1.4.1.2011.6.3.3.2.1.21 | OCTET STRING (SIZE (0..64)) | RO | H805GPFD | |||||||||
| ChwSlotPrimaryStatus | 1.3.6.1.4.1.2011.6.3.3.2.1.22 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The primary status of the Board. Options: 1. isNr(1) -in Service, normal 2. isAnr(2) -in service, abnormal 3. isRst(3) -in service, restricted 4. isAnrst(4) -in service, abnormal & restricted 5. oosAu(5) -out of service, autonomous 6. oosMa(6) -out of service, management 7. oosAuma(7) -out of service, autonomous & management 8. oosAurst(8) -out of service, autonomous & restricted 9. oosMaanr(9) -out of service, management & abnormal 10. unknown(10) -unknown
| |||||||||||||
| ChwSlotSecondaryStatus | 1.3.6.1.4.1.2011.6.3.3.2.1.23 | Bits | RO | ||||||||||
column · Bits · read-only · current The secondary status of the board. This BITS structure can report the following status: 1. sstAins(0) -this bit position positively reports that the status of the board is automatic in-service 2. sstFaf(1) -facility failure 3. sstFlt(2) -fault 4. sstLpbk(3) -loopback 5. sstMea(4) -mismatch of equipment and attributes 6. sstSgeo(5) -supporting entity outage 7. sstStbyh(6) -standby-Hot 8. sstTs(7) -test 9. sstUas(8) -unassigned 10. sstUeq(9) -unequipped 11. sstWrk(10) -working 12. sstPwr(11) -power
| |||||||||||||
| ChwSlotCreateTime | 1.3.6.1.4.1.2011.6.3.3.2.1.24 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current This object is used for getting the time of adding or creating a board. | |||||||||||||
| ChwSlotPortNumWorkMode | 1.3.6.1.4.1.2011.6.3.3.2.1.25 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Indicates the port number working mode of a board. The default value is portnumworkmode48(5). Options: 1. portnumworkmode8(1) - Indicates that the board is in 8-channel port number working mode. 2. portnumworkmode16(2) - Indicates that the board is in 16-channel port number working mode. 3. portnumworkmode24(3) - Indicates that the board is in 24-channel port number working mode. 4. portnumworkmode32(4) - Indicates that the board is in 32-channel port number working mode. 5. portnumworkmode48(5) - Indicates that the board is in 48-channel port number working mode. 6. other(255) - Indicates that the board is in invalid port working mode. Setting port working mode of a board triggers system restarts. Therefore, this node cannot be set concurrently with hwSlotAdminStatus, hwSlotRowStatus, and hwSlotWorkMode nodes.
| |||||||||||||
| ChwSlotExtendedBiosPassword | 1.3.6.1.4.1.2011.6.3.3.2.1.26 | OCTET STRING (SIZE (0 | 8..15)) | RW | ||||||||||
column · OCTET STRING (SIZE (0 | 8..15)) · read-write · current This object is used for setting the password of extended BIOS. | |||||||||||||
| ChwSlotItemCode | 1.3.6.1.4.1.2011.6.3.3.2.1.27 | OCTET STRING (SIZE (0..32)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-only · current The vendor-specific item code string for the board. The preferred value is the item code string actually printed on the component itself. | |||||||||||||
| ChwConfigBoardName | 1.3.6.1.4.1.2011.6.3.3.2.1.28 | OCTET STRING (SIZE (0..64)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..64)) · read-only · current describe config board name information of the slot. | |||||||||||||
| ChwBasicBoardName | 1.3.6.1.4.1.2011.6.3.3.2.1.29 | OCTET STRING (SIZE (0..64)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..64)) · read-only · current describe basic board name information of the slot. | |||||||||||||
| ThwSubslotTable | 1.3.6.1.4.1.2011.6.3.3.3 | NA | |||||||||||
table · not-accessible · current Subslot description table that describes detailed information of each subslot attached to the board. The indexes of this table are hwFrameIndex, hwSlotIndex and hwSubslotIndex. For the hwFrameIndex object, refer to hwFrameTable; for the hwSlotIndex object, refer to hwSlotTable. For example, 0.1.0 indicates that a daughter board is in subslot 0, slot 1, shelf 0. | |||||||||||||
| RhwSubslotEntry | 1.3.6.1.4.1.2011.6.3.3.3.1 | NA | |||||||||||
row · not-accessible · current Subslot description table that describes detailed information of each subslot attached to the board. The indexes of this entry are hwFrameIndex, hwSlotIndex and hwSubslotIndex. For the hwFrameIndex object, refer to hwFrameTable; for the hwSlotIndex object, refer to hwSlotTable. For example, 0.1.0 indicates that a daughter board is in subslot 0, slot 1, shelf 0. | |||||||||||||
| ChwSubslotIndex | 1.3.6.1.4.1.2011.6.3.3.3.1.1 | Integer32 (0..255) | RO | ||||||||||
column · Integer32 (0..255) · read-only · current The index of a daughter board is determined by the physical position of the daughter board on the board. The hwSubslotIndex value of 65535 indicates the board itself. | |||||||||||||
| ChwSubslotType | 1.3.6.1.4.1.2011.6.3.3.3.1.2 | HWSubPCBType | RC | ||||||||||
column · HWSubPCBType · read-create · current For the definition of the daughter board type, refer to the HUAWEI-TC-MIB.mib. When adding a daughter board on a board, you need to specify the type of the daughter board and check whether the daughter board can be inserted in the specified subslot on the board. | |||||||||||||
| ChwSubslotPorts | 1.3.6.1.4.1.2011.6.3.3.3.1.3 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of physical ports owned by the sub board. | |||||||||||||
| ChwSubslotOperStatus | 1.3.6.1.4.1.2011.6.3.3.3.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Operation status of the daughter board.
Options:
1. uninstall(1) -indicates that the daughter board is not installed
2. normal(2) -indicates that the daughter board is running normally
3. fault(3) -indicates that the daughter board is faulty
4. forbidden(4) -the object is not used
5. autofind(5) -indicates that the daughter board is in the autofind state.
6. config(6) -indicates that the daughter board is in the configuration state.
The daughter board is in the configuration state during data configuration.
After a daughter board is successfully configured, its status is changed from config(6)
to normal(2). If the configuration fails, the daughter board status is changed from config(6) to fault(3)
7. offline(7) -indicates that the daughter board is faulty and is not in position
8. abnormal(8) -indicates that the daughter board is abnormal
9. versionerr(9) -indicates that the daughter board version is error
10. autoload(10) -indicates that the daughter board is in the auto loading state. If detecting a software update,
the daughter board automatically loads the update. If a daughter board is in the auto loading state,
resetting or disabling the daughter board may fail
11. outofservice(11) -indicates that the daughter board is out of service
12. graceful(12) -indicates that the daughter board running state is graceful
13. shutdown(13) -indicates that the daughter board is in the shutdown state.
14. energysavingshutdown(14) -used for system energy saving. Reference to hwSysEnergySaving node for more detail.
15. hightempshutdown(15) -when the temperature of a daughter board exceeds the high temperature threshold,
the daughter board is powered off in order to protect the daughter board
16. manualshutdown(16) -services on certain daughter boards can be recovered only after restart of the daughter board.
You can manually power off the daughter board.
Then, the daughter board is in the manual shutdown state
17. mismatch(17) -when a daughter board inserted in a slot is inconsistent with the configuration saved in the system,
the daughter board is in the mismatch(17) state
18. acoffshutdown(18) -used to protect system when there is no AC Power.
Certain products use the power saving features, energysavingshutdown(14), hightempshutdown(15),
manualshutdown(16),acoffshutdown(18) to distinguish the shutdown causes.
| |||||||||||||
| ChwSubslotAdminStatus | 1.3.6.1.4.1.2011.6.3.3.3.1.7 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Administration status of the daughter board in the subslot. This object is not used. Options: 1. nooperation(-1) -indicates the default state 2. disable(1) -indicates the disable state 3. enable(2) -indicates the enable state 4. reset(3) -indicates the reset state 5. test(4) -indicates the test state 6. confirm(5) -indicates the confirmation state 7. delete(6) -indicates the delete state 8. is(7) -indicates in service 9. oos(8) -indicates out of service 10. poweron(9) -indicates the poweron state 11. poweroff(10) -indicates the poweroff state
| |||||||||||||
| ChwSubslotVersion | 1.3.6.1.4.1.2011.6.3.3.3.1.8 | OCTET STRING (SIZE (0..1024)) | RC | ||||||||||
column · OCTET STRING (SIZE (0..1024)) · read-create · current daughter board version information, obtained from the version information about the board on which the daughter board is located. Refer to the hwSlotVersion in the hwSlotTable. | |||||||||||||
| ChwSubSlotDesc | 1.3.6.1.4.1.2011.6.3.3.3.1.9 | OCTET STRING (SIZE (0..64)) | RC | ||||||||||
column · OCTET STRING (SIZE (0..64)) · read-create · current The description about the daughter board. Do not support the setting operation. | |||||||||||||
| ChwSubslotRowStatus | 1.3.6.1.4.1.2011.6.3.3.3.1.10 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current Only the operation of adding a daughter board, that is, setting createAndGo(4), is supported. When adding a daughter board, you must set the hwSubslotType object at the same time. After you add a board by using the hwSlotAdminStatus object in hwSlotTable, if the board allows you to add a daughter board and the board status (hwSlotOperStatus) is discovery(5), you can add a daughter board in this way. | |||||||||||||
| ChwSubSlotPhySerialNum | 1.3.6.1.4.1.2011.6.3.3.3.1.11 | OCTET STRING (SIZE (0..32)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-only · current The vendor-specific serial number string for the daughter board. The preferred value is the serial number string actually printed on the component itself. | |||||||||||||
| ChwSubslotTypeName | 1.3.6.1.4.1.2011.6.3.3.3.1.12 | OCTET STRING (SIZE (0..64)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..64)) · read-only · current daughter board type name in the subslot,refer to the HW-TC table. | |||||||||||||
| ChwSubslotPrimaryStatus | 1.3.6.1.4.1.2011.6.3.3.3.1.13 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The primary status of the daughter board. Options: 1. isNr(1) -in Service, normal 2. isAnr(2) -in service, abnormal 3. isRst(3) -in service, restricted 4. isAnrst(4) -in service, abnormal & restricted 5. oosAu(5) -out of service, autonomous 6. oosMa(6) -out of service, management 7. oosAuma(7) -out of service, autonomous & management 8. oosAurst(8) -out of service, autonomous & restricted 9. oosMaanr(9) -out of service, management & abnormal
| |||||||||||||
| ChwSubslotSecondaryStatus | 1.3.6.1.4.1.2011.6.3.3.3.1.14 | Bits | RO | ||||||||||
column · Bits · read-only · current The secondary status of the daughter board. This BITS structure can report the following status: 1. sstAins(0) -this bit position positively reports that the status of the daughter board is automatic in-service 2. sstFaf(1) -facility failure 3. sstFlt(2) -fault 4. sstLpbk(3) -loopback 5. sstMea(4) -mismatch of equipment and attributes 6. sstSgeo(5) -supporting entity outage 7. sstStbyh(6) -standby-Hot 8. sstTs(7) -test 9. sstUas(8) -unassigned 10. sstUeq(9) -unequipped 11. sstWrk(10) -working 12. sstPwr(11) -power
| |||||||||||||
| ChwSubslotCLEICode | 1.3.6.1.4.1.2011.6.3.3.3.1.15 | OCTET STRING (SIZE (0..640)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..640)) · read-only · current daughter board CLEI Code(COMMON LANGUAGE Location Identifier Code): Used to identify the location and the type of a telecommunication device. For the definition of the CLEI Code, refer to the GR-485. | |||||||||||||
| ChwSubslotTemperature | 1.3.6.1.4.1.2011.6.3.3.3.1.16 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The temperature of the daughter board. (Unit:centigrade) The value 0X7FFFFFFF indicates invalid temperature.
| |||||||||||||
| ChwSubslotCpuRate | 1.3.6.1.4.1.2011.6.3.3.3.1.17 | Integer32 (-1 | 0..100) | RO | ||||||||||
column · Integer32 (-1 | 0..100) · read-only · current The cpu occupancy of the daughter board. The value -1 indicates invalid cpu occupancy. | |||||||||||||
| ChwSubslotRamUseRate | 1.3.6.1.4.1.2011.6.3.3.3.1.18 | Integer32 (-1 | 0..100) | RO | ||||||||||
column · Integer32 (-1 | 0..100) · read-only · current The memory occupancy of the daughter board. The value -1 indicates invalid memory occupancy. | |||||||||||||
| ThwPortTable | 1.3.6.1.4.1.2011.6.3.3.4 | NA | |||||||||||
table · not-accessible · current Port configuration table that describes the detailed information of physical ports in the board, including the type, status and rate of the port. This table must be implemented. The indexes of this table are hwFrameIndex, hwSlotIndex, hwSubslotIndex and hwPortIndex. hwFrameIndex refer to hwFrameTable, hwSlotIndex refer to hwSlotTable, hwSubslotIndex refer to hwSubslotTable. | |||||||||||||
| RhwPortEntry | 1.3.6.1.4.1.2011.6.3.3.4.1 | NA | |||||||||||
row · not-accessible · current Port configuration table that describes the detailed information of physical ports in the board, including the type, status and rate of the port. This table must be implemented. The indexes of this entry are hwFrameIndex, hwSlotIndex, hwSubslotIndex and hwPortIndex. hwFrameIndex refer to hwFrameTable, hwSlotIndex refer to hwSlotTable, hwSubslotIndex refer to hwSubslotTable. | |||||||||||||
| ChwPortIndex | 1.3.6.1.4.1.2011.6.3.3.4.1.1 | Integer32 (0..255) | RO | ||||||||||
column · Integer32 (0..255) · read-only · current Port index, indicating the physical number of the port on a board. | |||||||||||||
| ChwPortType | 1.3.6.1.4.1.2011.6.3.3.4.1.2 | HWPortType | RO | ||||||||||
column · HWPortType · read-only · current Port type, which is defined in HUAWEI-TC-MIB.mib. | |||||||||||||
| ChwPortDesc | 1.3.6.1.4.1.2011.6.3.3.4.1.3 | OCTET STRING (SIZE (0..80)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..80)) · read-write · current The description about the port, used to describe extra information of the port. For example, you can describe the user that connects to the port. The standby control board does not support setting of the port description. | |||||||||||||
| ChwPortSpeed | 1.3.6.1.4.1.2011.6.3.3.4.1.4 | Integer32 | RO | deprecated | |||||||||
column · Integer32 · read-only · deprecated The speed of the port. Unit:Kbps | |||||||||||||
| ChwPortOperStatus | 1.3.6.1.4.1.2011.6.3.3.4.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Port operation status. Options: 1.normal(1) -indicates that the link is up or activated 2.fault(2) -indicates that port failure 3.localLoopback(3) -indicates that normal local loopback 4.forbidden(4) -indicates that the port is disabled 5.test(5) -indicates test start 6.remoteLoopback(6) -indicates normal remote loopback 7.activated(10) -indicates that the port is being activated 8.deactivated(11) -indicates that the link is down or deactivated 9.block(12) -indicates port blocking 10.nolight(13) -indicates no signal in ATM port 11.innerLocalLoopback(14) -indicates that inner local loopback toward inner system chipset (it's UTOPIA loopback for ADSL port) 12.innerRemoteLoopback(15)-indicates that inner remote loopback toward inner system chipset 13.locked(16) -indicates locked 14.busy(17) -indicates busy 15.maintain(18) -indicates maintenance 16.standbynormal(19) -indicates that the port on the standby control board is activated 17.standbyfault(20) -indicates that the port on the standby control board is faulty 18.adslloopbackafe(21) -indicates that AFE loopback 19.adslloopbackhybrid(22) -indicates that HYBRID loopback 20.rtuLocalLoopback(23) -indicates that RTU local loopback 21.rtuRemoteLoopback(24) -indicates that RTU remote loopback 22.linkup(25) -indicates eth port online 23.linkdown(26) -indicates eth port offline 24.powerDenied(50) -indicates port operation state is power denied
| |||||||||||||
| ChwPortAdminStatus | 1.3.6.1.4.1.2011.6.3.3.4.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Port administration status. Options: 1.active(1) -activate the port 2.deactive(2) -deactivate the port 3.block(3) -block the port 4.unblock(4) -unblock the port 5.confirm(5) -confirm the port 6.delete(6) -delete the port 7.reset(7) -reset the port 8.localLoopback(8) -loop back the port 9.remoteLoopback(9) -remotely loop back the port 10.stopLoopback(11) -stop looping back the port 11.innerLocalLoopback(12) -inner local loopback toward inner system chipset 12.innerRemoteLoopback(13) -inner remote loopback toward inner system chipset 13.rtuLocalLoopback(14) -RTU local loopback RUT: Local loopback 14.rtuRemoteLoopback(15) -RTU remote loopback 15.utopiaLocalLoopback(16) -UTOPIA Local Loopback 16.afeLocalLoopback(17) -AFE Local Loopback 17.hybirdLocalLoopback(18) -HYBIRD Local Loopback 18.noLoopBackNoTest(50) -no loop back and no test 19.noLoopBackTest(51) -no loop back and test 20.localLoopBackNoTest(52) -Local loop back and no test 21.localLoopBackTest(53) -Local loop back test 22.remoteLoopBackNoTest(54) -Remote loopback and no test 23.remoteLoopBackTest(55) -Remote loopback and test 24.localLoopbackPTM(56) -PTM Local Loopback 25.eocLoopbackNoTest(57) -EOC Loop back and no test 26.eocLoopbackTest(58) -EOC Loop back and test 27.prohibited(59) -Port is prohibited
| |||||||||||||
| ChwPortNetworkRole | 1.3.6.1.4.1.2011.6.3.3.4.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Indicates the network role of a board. Options: 1. uplink(1) -indicates the uplink port 2. cascade(2) -indicates the subtending port 3. access(3) -indicates the downstream access port 4. extend(4) -indicates connectting to extended frame 5. stack(5) -indicates the stack port
| |||||||||||||
| ChwPortTemperature | 1.3.6.1.4.1.2011.6.3.3.4.1.8 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The temperature of the port. The object is not used. | |||||||||||||
| ChwPortPrimaryStatus | 1.3.6.1.4.1.2011.6.3.3.4.1.9 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The primary status of the port. Options: 1. isNr(1) -in Service, normal 2. isAnr(2) -in service, abnormal 3. isRst(3) -in service, restricted 4. isAnrst(4) -in service, abnormal & restricted 5. oosAu(5) -out of service, autonomous 6. oosMa(6) -out of service, management 7. oosAuma(7) -out of service, autonomous & management 8. oosAurst(8) -out of service, autonomous & restricted 9. oosMaanr(9) -out of service, management & abnormal
| |||||||||||||
| ChwPortSecondaryStatus | 1.3.6.1.4.1.2011.6.3.3.4.1.10 | Bits | RO | ||||||||||
column · Bits · read-only · current The secondary status of the port. This BITS structure can report the following status: 1. sstAins(0) -this bit position positively reports that the status of the port is automatic in-service 2. sstFaf(1) -facility failure 3. sstFlt(2) -fault 4. sstLpbk(3) -loopback 5. sstMea(4) -mismatch of equipment and attributes 6. sstSgeo(5) -supporting entity outage 7. sstStbyh(6) -standby-Hot 8. sstTs(7) -test 9. sstUas(8) -unassigned 10. sstUeq(9) -unequipped 11. sstWrk(10) -working 12. sstPwr(11) -power
| |||||||||||||
| ChwPortVsIDMask | 1.3.6.1.4.1.2011.6.3.3.4.1.11 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The virtual system mask of the port, each bit indicates the VAN to which the board belongs. For example, the first bit maps vs0, the second bit maps vs1, and the rest can be deducted by analog. | |||||||||||||
| NhwFrameLinks | 1.3.6.1.4.1.2011.6.3.3.5 | ||||||||||||
| ShwFrameLinkNumber | 1.3.6.1.4.1.2011.6.3.3.5.1 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current Number of frame Links, which refers to the number of links between the main frame and the standby frame of the current device. If there are many frames, but the device cannot know the link relation of the frames, then the initial value of this node is 0. If a user manually adds the link between the frames later, then this node shall be renewed. Default: 0 | |||||||||||||
| ThwFrameLinkTable | 1.3.6.1.4.1.2011.6.3.3.5.2 | NA | |||||||||||
table · not-accessible · current The index of this table is hwFrameLinkIndex. The frame link table. It describes the topology relation between the frames. For the device that can automatically discover the link relationship between the devices, this table can be implemented as read-only table. For the device whose inter-frame relation needs to be configured manually, this table shall support adding and deletion. All the links must locate on the two existing ports. | |||||||||||||
| RhwFrameLinkEntry | 1.3.6.1.4.1.2011.6.3.3.5.2.1 | NA | |||||||||||
row · not-accessible · current The index of this entry is hwFrameLinkIndex. The frame link table. It describes the topology relation between the frames. For the device that can automatically discover the link relationship between the devices, this table can be implemented as read-only table. For the device whose inter-frame relation needs to be configured manually, this table shall support adding and deletion. All the links must locate on the two existing ports.
| |||||||||||||
| ChwFrameLinkIndex | 1.3.6.1.4.1.2011.6.3.3.5.2.1.1 | Integer32 (0..65535) | RO | ||||||||||
column · Integer32 (0..65535) · read-only · current Index of the frame link. It is sequentially numerated and exclusively identified in the device. There is no restriction to the coding rule. | |||||||||||||
| ChwFrameLinkLeftFrame | 1.3.6.1.4.1.2011.6.3.3.5.2.1.2 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The ID of the left node linked to the frame, corresponding to the hwFrameIndex in the hwFrameTable | |||||||||||||
| ChwFrameLinkLeftSlot | 1.3.6.1.4.1.2011.6.3.3.5.2.1.3 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The ID of the left slot linked to the frame, corresponding to the hwSlotIndex in the hwSlotTable. It indicates which slot of the left node is the link entry. | |||||||||||||
| ChwFrameLinkLeftSubSlot | 1.3.6.1.4.1.2011.6.3.3.5.2.1.4 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Link the left subslot, corresponding to the hwSubSlotIndex in the hwSubTable. It indicates which subslot of the left node is the link entry. | |||||||||||||
| ChwFrameLinkLeftPort | 1.3.6.1.4.1.2011.6.3.3.5.2.1.5 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The ID of the left port linked to the frame, corresponding to the hwPortIndex in the hwPortTable. It indicates which port of the left node is the link entry. | |||||||||||||
| ChwFrameLinkRightFrame | 1.3.6.1.4.1.2011.6.3.3.5.2.1.6 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The ID of the right node linked to the frame, corresponding to the hwFrameIndex of the hwFrameTable. | |||||||||||||
| ChwFrameLinkRightSlot | 1.3.6.1.4.1.2011.6.3.3.5.2.1.7 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The ID of the right slot linked the frame, corresponding to the hwSlotIndex of the hwSlotTable. It indicates which slot of the right node is the link entry. | |||||||||||||
| ChwFrameLinkRightSubSlot | 1.3.6.1.4.1.2011.6.3.3.5.2.1.8 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Link the right subslot, corresponding to the hwSubSlotIndex in the hwSubSlotTable. It indicates which subslot of the right node is the link entry. | |||||||||||||
| ChwFrameLinkRightPort | 1.3.6.1.4.1.2011.6.3.3.5.2.1.9 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The ID of the right port linked to the frame, corresponding to the hwPortIndex in the hwPortTable. It indicates which port of the right port is the link entry. | |||||||||||||
| ChwFrameLinkOperStatus | 1.3.6.1.4.1.2011.6.3.3.5.2.1.10 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The running status of the link. Options: 1.normal(1) - the running status of the link is normal 2.fault(2) - the running status of the link is fault 3.discovery(3) - the link is discovered
| |||||||||||||
| ChwFrameLinkRowStatus | 1.3.6.1.4.1.2011.6.3.3.5.2.1.11 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The row status of the frame link, used to add or delete a link. | |||||||||||||
| ShwFrameLinkNextIndex | 1.3.6.1.4.1.2011.6.3.3.5.3 | Integer32 (0..254) | RO | ||||||||||
scalar · Integer32 (0..254) · read-only · current The frame link table indicates adding the index value to be assigned by the new link. This leaf is used to access an index ID of the next frame link dynamically assigned by the host before delivering the adding link. To deliver the adding link, the value of the leaf shall be accessed,and be delivered together with the frame link table. Otherwise, the host can not execute the operation and will return the error. Default: 0 | |||||||||||||
| NhwNarrowBoard | 1.3.6.1.4.1.2011.6.3.3.6 | ||||||||||||
| ThwBoardAttrTable | 1.3.6.1.4.1.2011.6.3.3.6.1 | NA | |||||||||||
table · not-accessible · current Inquiring or modifying AULaw, impedance and current or ringvoltage of ASL, A32 and H511POTS ports. The indexes of this table are hwFrameIndex and hwSlotIndex. For the hwFrameIndex object, refer to hwFrameTable; for the hwSlotIndex object, refer to hwSlotTable. | |||||||||||||
| RhwBoardAttrEntry | 1.3.6.1.4.1.2011.6.3.3.6.1.1 | NA | |||||||||||
row · not-accessible · current Inquiring or modifying AULaw, impedance and current or ringvoltage of ASL, A32 and H511POTS ports. The indexes of this entry are hwFrameIndex and hwSlotIndex. For the hwFrameIndex object, refer to hwFrameTable; for the hwSlotIndex object, refer to hwSlotTable.
| |||||||||||||
| ChwBoardAulaw | 1.3.6.1.4.1.2011.6.3.3.6.1.1.1 | Integer32 (1..2) | RW | ||||||||||
column · Integer32 (1..2) · read-write · current Coding method of voice signal when digitalizing. In different country or area it should be A law or u law. 1 -- A law 2 -- u law | |||||||||||||
| ChwBoardCurrent | 1.3.6.1.4.1.2011.6.3.3.6.1.1.2 | Integer32 (1..10) | RW | ||||||||||
column · Integer32 (1..10) · read-write · current Port current supported by the board. The value ranges from 1 to 10, which indicates the port current value supported under certain loopline impedance. 1 -- 25mA steady current 2 -- 16mA steady current 3 -- 35mA 2*200 4 -- 35mA 2*250 5 -- 35mA 2*400 6 -- 47mA 2*200 7 -- 47mA 2*250 8 -- 47mA 2*400 9 -- 17mA steady current 10 -- 20mA steady current | |||||||||||||
| ChwBoardImpedance | 1.3.6.1.4.1.2011.6.3.3.6.1.1.3 | Integer32 (1..15 | 255) | RW | ||||||||||
column · Integer32 (1..15 | 255) · read-write · current Port impedance of the board. The following values indicates different impedance with different application circumstances. 1 -- Bureau machine in China(200+680|| 100nf) 2 -- User Machine in China(200+560|| 100nf) 3 -- 600 Interface 4 -- Interface of russian(150+510|| 47nf) 5 -- (220+820|| 115nf ) 6 -- (220+820|| 120nf ) 7 -- 900 Interface 8 -- Interface of Brazil(800|| 50nf) 9 -- BT(Zin=300+1000|| 220nf ,Zload=370+620|| 310nf) 10 -- HK_BT3(Zin=370+620|| 310nf,Zload=600) 11 -- HK_BT5(Zin=270+264|| 357nf+1434|| 265nf,Zload=600) 12 -- BT1(BT0 without AGC) 13 -- BT2(Zin=87+1052||228nF+229||28.4nF, Zload=270+264||357nF+1434||265nF) 14 -- BT3(Zin=87+1052||228nF+229||28.4nF, Zload=164+162||363nF+1227||350nF) 15 -- KPN(Zin= 270+750|| 150nf) 255 -- Private definition | |||||||||||||
| ChwBoardEnvironment | 1.3.6.1.4.1.2011.6.3.3.6.1.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The object is used to set and query the working environment of a board. Options: 1.emsan(1) -indicates that the device is on a terminal node or a convergence node 2.smsan(2) -indicates that the device is on a terminal node or a convergence node
| |||||||||||||
| ChwBoardWorkmode | 1.3.6.1.4.1.2011.6.3.3.6.1.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The object is used to set the working mode of the COMBO board.
Options:
1.combo(1) -the broadband and voice parts of the board are powered on
2.powerSaving(2) -the board cuts off the power supply of the broadband part
3.auto(3) -normally the broadband and voice parts of the board are powered on
When the mains supply is cut off, the board automatically cuts off
the power supply of the broadband part
| |||||||||||||
| ChwBoardRingVoltage | 1.3.6.1.4.1.2011.6.3.3.6.1.1.6 | Integer32 (1..2) | RW | ||||||||||
column · Integer32 (1..2) · read-write · current It is supported to config ringvoltage on virtual A04 board. It should be 41.5v or 45v. 1 -- 25Hz 41.5V 2 -- 25Hz 45V | |||||||||||||
| ChwBoardWorkState | 1.3.6.1.4.1.2011.6.3.3.6.1.1.7 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The object is used to query the working status of the COMBO board.
Options:
1. combo(1) -if the broadband and voice parts of the board are powered on,
the returned value is combo(1) ,DEFVAL { 1 }
2. powerSaving(2) -if only the voice part of the board is powered on,
the returned value is powerSaving(2)
| |||||||||||||
| ThwVsPortTable | 1.3.6.1.4.1.2011.6.3.3.7 | NA | |||||||||||
table · not-accessible · current Port query table that describes the detailed information of physical ports in the board, including the type, the virtual system mask of the port. The indexes of this table are hwFrameIndex, hwSlotIndex, hwSubslotIndex and hwPortIndex. hwFrameIndex refer to hwFrameTable, hwSlotIndex refer to hwSlotTable, hwSubslotIndex refer to hwSubslotTable, hwPortIndex refer to hwPortTable. | |||||||||||||
| RhwVsPortEntry | 1.3.6.1.4.1.2011.6.3.3.7.1 | NA | |||||||||||
row · not-accessible · current Port query table that describes the detailed information of physical ports in the board, including the type, the virtual system mask of the port. The indexes of this entry are hwFrameIndex, hwSlotIndex, hwSubslotIndex and hwPortIndex. hwFrameIndex refer to hwFrameTable, hwSlotIndex refer to hwSlotTable, hwSubslotIndex refer to hwSubslotTable, hwPortIndex refer to hwPortTable. | |||||||||||||
| ChwVsPortType | 1.3.6.1.4.1.2011.6.3.3.7.1.1 | HWPortType | RO | ||||||||||
column · HWPortType · read-only · current Port type, which is defined in HUAWEI-TC-MIB.mib. | |||||||||||||
| ChwVsPortVsMask | 1.3.6.1.4.1.2011.6.3.3.7.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The virtual system mask of the port, each bit indicates the VAN to which the port belongs. For example, the first bit maps vs0, the second bit maps vs1, and the rest can be deducted by analog. | |||||||||||||
| ThwCpuDevTable | 1.3.6.1.4.1.2011.6.3.4 | NA | |||||||||||
table · not-accessible · current This table describes the CPU usage, including the average CPU usage and periodic CPU usage. | |||||||||||||
| RhwCpuDevEntry | 1.3.6.1.4.1.2011.6.3.4.1 | NA | |||||||||||
row · not-accessible · current The indexes of this entry are hwFrameIndex, hwSlotIndex and hwCpuDevIndex. A table of CPU statistics.
| |||||||||||||
| ChwCpuDevIndex | 1.3.6.1.4.1.2011.6.3.4.1.1 | Integer32 (0..255) | NA | ||||||||||
column · Integer32 (0..255) · not-accessible · current CPU index, hwFrameIndex, and hwSlotIndex constitute the HUAWEI-CPU-MIB index. For a single-CPU device, the value of this object is 0. | |||||||||||||
| ChwCpuDevDuty | 1.3.6.1.4.1.2011.6.3.4.1.2 | Integer32 (0..100) | RO | ||||||||||
column · Integer32 (0..100) · read-only · current The value of this object identifies the average CPU usage of a board or an entity. | |||||||||||||
| ChwAvgDuty1min | 1.3.6.1.4.1.2011.6.3.4.1.3 | Integer32 (0..100) | RO | ||||||||||
column · Integer32 (0..100) · read-only · current The value of this object identifies the average CPU usage of a board or entity 1 minute before the data is read. | |||||||||||||
| ChwAvgDuty5min | 1.3.6.1.4.1.2011.6.3.4.1.4 | Integer32 (0..100) | RO | ||||||||||
column · Integer32 (0..100) · read-only · current The value of this object identifies the average CPU usage of a board or entity 5 minutes before the data is read. | |||||||||||||
| ChwCpuRunTime | 1.3.6.1.4.1.2011.6.3.4.1.5 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Duration of CPU running(s). | |||||||||||||
| ChwCpuOverLoadNum | 1.3.6.1.4.1.2011.6.3.4.1.6 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Number of CPU overload. | |||||||||||||
| ChwCpuOverLoadTime | 1.3.6.1.4.1.2011.6.3.4.1.7 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Duration of CPU overload(s). | |||||||||||||
| ChwCpuCongestionNum | 1.3.6.1.4.1.2011.6.3.4.1.8 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Number of CPU congestion. | |||||||||||||
| ChwCpuCongestionTime | 1.3.6.1.4.1.2011.6.3.4.1.9 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Duration of CPU congestion(s). | |||||||||||||
| NhwMemoryDev | 1.3.6.1.4.1.2011.6.3.5 | ||||||||||||
| ThwMemoryDevTable | 1.3.6.1.4.1.2011.6.3.5.1 | NA | |||||||||||
table · not-accessible · current This table describes memory usage statistics, including the total memory, idle memory, and occupied memory. | |||||||||||||
| RhwMemoryDevEntry | 1.3.6.1.4.1.2011.6.3.5.1.1 | NA | |||||||||||
row · not-accessible · current The index of this entry is hwFrameIndex, hwSlotIndex or hwMemoryDevModuleIndex. This table contains memory information. | |||||||||||||
| ChwMemoryDevModuleIndex | 1.3.6.1.4.1.2011.6.3.5.1.1.1 | Integer32 (0..65535) | NA | ||||||||||
column · Integer32 (0..65535) · not-accessible · current This object is only used for extension. For a single-CPU device, the value of this object is 0. | |||||||||||||
| ChwMemoryDevSize | 1.3.6.1.4.1.2011.6.3.5.1.1.2 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the total memory size of a managed object, in bytes. It includes the free memory size and occupied memory size, that is, the sum of hwMemoryDevFree and hwMemoryDevRawSliceUsed. Each board has a memory. The memory size varies with products. | |||||||||||||
| ChwMemoryDevFree | 1.3.6.1.4.1.2011.6.3.5.1.1.3 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object indicates the idle memory size of the main control board, in bytes. The value of this object is always less than hwMemoryDevSize. | |||||||||||||
| ChwMemoryDevRawSliceUsed | 1.3.6.1.4.1.2011.6.3.5.1.1.4 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current This object indicates the total size of occupied raw slice memory, in bytes. The value of this object is always less than hwMemoryDevSize. | |||||||||||||
| ChwMemoryDevLargestFree | 1.3.6.1.4.1.2011.6.3.5.1.1.5 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current This object indicates the maximum number of consecutive bytes that are not occupied on a managed object. It is the maximum memory size that can be allocated by the system. The value of this object is always less than hwMemoryDevSize. | |||||||||||||
| ChwMemoryDevFail | 1.3.6.1.4.1.2011.6.3.5.1.1.6 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the number of memory allocation failures. The default value is 0. | |||||||||||||
| ChwMemoryDevFailNoMem | 1.3.6.1.4.1.2011.6.3.5.1.1.7 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the number of memory allocation failures due to the lack of idle memory. The default value is 0. | |||||||||||||
| ChwMemoryDevSize64 | 1.3.6.1.4.1.2011.6.3.5.1.1.8 | CounterBasedGauge64 | RO | ||||||||||
column · CounterBasedGauge64 · read-only · current This object indicates the total size of memory modules on the managed object that exceeds 4 GB, in bytes. | |||||||||||||
| ChwMemoryDevFree64 | 1.3.6.1.4.1.2011.6.3.5.1.1.9 | CounterBasedGauge64 | RO | ||||||||||
column · CounterBasedGauge64 · read-only · current This object indicates the idle memory size when the total size of memory modules on the managed object exceeds 4 GB, in bytes. | |||||||||||||
| ThwBufferTable | 1.3.6.1.4.1.2011.6.3.5.2 | NA | |||||||||||
table · not-accessible · current The index of this table is hwFrameIndex, hwSlotIndex, hwBufferModuleIndex or hwBufferSize. Buffer information table. | |||||||||||||
| RhwBufferEntry | 1.3.6.1.4.1.2011.6.3.5.2.1 | NA | |||||||||||
row · not-accessible · current The index of this entry is hwFrameIndex, hwSlotIndex, hwBufferModuleIndex or hwBufferSize. Buffer information table. | |||||||||||||
| ChwBufferModuleIndex | 1.3.6.1.4.1.2011.6.3.5.2.1.1 | Integer32 (0..65535) | NA | ||||||||||
column · Integer32 (0..65535) · not-accessible · current Index of hwBufferTable. | |||||||||||||
| ChwBufferSize | 1.3.6.1.4.1.2011.6.3.5.2.1.2 | Integer32 (1..65535) | NA | ||||||||||
column · Integer32 (1..65535) · not-accessible · current Contains the size of byte hwBuffers, in the unit of byte. | |||||||||||||
| ChwBufferCurrentTotal | 1.3.6.1.4.1.2011.6.3.5.2.1.3 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Contains the total number of hwBuffers currently. | |||||||||||||
| ChwBufferCurrentUsed | 1.3.6.1.4.1.2011.6.3.5.2.1.4 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Contains the number of used hwBuffers currently. | |||||||||||||
| NhwFlashDev | 1.3.6.1.4.1.2011.6.3.6 | ||||||||||||
| ThwFlashDevTable | 1.3.6.1.4.1.2011.6.3.6.1 | NA | |||||||||||
table · not-accessible · current The index of this table is hwFrameIndex, hwSlotIndex or hwFlashDevIndex. This table contains flash information. | |||||||||||||
| RhwFlashDevEntry | 1.3.6.1.4.1.2011.6.3.6.1.1 | NA | |||||||||||
row · not-accessible · current The index of this entry is hwFrameIndex, hwSlotIndex or hwFlashDevIndex. This table contains flash information. | |||||||||||||
| ChwFlashDevIndex | 1.3.6.1.4.1.2011.6.3.6.1.1.1 | Integer32 (0..65535) | NA | ||||||||||
column · Integer32 (0..65535) · not-accessible · current Index of hwFlashDevTable. | |||||||||||||
| ChwFlashDevSize | 1.3.6.1.4.1.2011.6.3.6.1.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Total size in Octets of Flash memory, | |||||||||||||
| ChwFlashDevFree | 1.3.6.1.4.1.2011.6.3.6.1.1.3 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Unused Size in Octets of Flash memory. | |||||||||||||
| ChwFlashDevEraseTime | 1.3.6.1.4.1.2011.6.3.6.1.1.4 | TimeTicks | RO | ||||||||||
column · TimeTicks · read-only · current The last time when Flash was erased after powerup. | |||||||||||||
| ChwFlashDevEraseStatus | 1.3.6.1.4.1.2011.6.3.6.1.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Status of current or last flash erasing. Options: 1.flashErasing(1) - flash is executing erasing operation 2.flashErasedSuccessful(2) - flash erased successfully 3.flashErasedFail(3) - flash erased failed 4.flashReadOnly(4) - flash state is read only 5.flashOpenFailure(5) - open flash failed 6.bufferAllocationFailure(6) - allocating buffer on flash failed 7.noEraseAfterPowerOn(7) - there is no erasing operation after device was powered on
| |||||||||||||
| ChwFlashDevStatus | 1.3.6.1.4.1.2011.6.3.6.1.1.6 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Status of the availability of flash. Options: 1.busy(1) - flash state is busy 2.available(2) - flash state is available
| |||||||||||||
| NhwAlarmInfo | 1.3.6.1.4.1.2011.6.3.7 | ||||||||||||
| ThwAlarmTable | 1.3.6.1.4.1.2011.6.3.7.1 | NA | obsolete | ||||||||||
table · not-accessible · obsolete The index of this table is hwAlarmSerialIndex. This table is no longer used. | |||||||||||||
| RhwAlarmEntry | 1.3.6.1.4.1.2011.6.3.7.1.1 | NA | obsolete | ||||||||||
row · not-accessible · obsolete The index of this entry is hwAlarmSerialIndex. This table is no longer used.
| |||||||||||||
| ChwAlarmSerialIndex | 1.3.6.1.4.1.2011.6.3.7.1.1.1 | Integer32 (0..2147483647) | RO | obsolete | |||||||||
column · Integer32 (0..2147483647) · read-only · obsolete This object is no longer used. | |||||||||||||
| ChwObsoleteAlarmType | 1.3.6.1.4.1.2011.6.3.7.1.1.2 | INTEGER | RO | obsolete | |||||||||
column · INTEGER · read-only · obsolete The type of the Alarm.
| |||||||||||||
| ChwAlarmOcurTime | 1.3.6.1.4.1.2011.6.3.7.1.1.3 | DateAndTime | RO | obsolete | |||||||||
column · DateAndTime · read-only · obsolete This object is no longer used. | |||||||||||||
| CtrapObjectIdValue | 1.3.6.1.4.1.2011.6.3.7.1.1.4 | OCTET STRING | RO | obsolete | |||||||||
column · OCTET STRING · read-only · obsolete This object is no longer used. | |||||||||||||
| NhwDevTraps | 1.3.6.1.4.1.2011.6.3.8 | ||||||||||||
| NhwDevTrapVbOids | 1.3.6.1.4.1.2011.6.3.8.1 | ||||||||||||
| ShwFrameAdminResult | 1.3.6.1.4.1.2011.6.3.8.1.1 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current Frame administration result.
| |||||||||||||
| ShwSlotAdminResult | 1.3.6.1.4.1.2011.6.3.8.1.2 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current Slot administration result.
| |||||||||||||
| ShwSubslotAdminResult | 1.3.6.1.4.1.2011.6.3.8.1.3 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current Subslot administration result.
| |||||||||||||
| ShwPortAdminResult | 1.3.6.1.4.1.2011.6.3.8.1.4 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current Port administration result.
| |||||||||||||
| ShwConfigChangeIP | 1.3.6.1.4.1.2011.6.3.8.1.5 | IpAddress | AN | ||||||||||
scalar · IpAddress · accessible-for-notify · current The serial IP of configuration changes. If the configuration changes is trigger by the command line users, the IP address is 0.0.0.0. If it is triggered by the SNMP user, the IP address is the SNMP user's IP address. The Trap of configuration changes will not be sent to the SNMP user, who triggered the configuration changes. | |||||||||||||
| ShwDevUserLabelType | 1.3.6.1.4.1.2011.6.3.8.1.6 | Integer32 | AN | ||||||||||
scalar · Integer32 · accessible-for-notify · current User label type. 1. Frame type. 2. Slot type. 3. Port type. | |||||||||||||
| ShwDevUserLabel | 1.3.6.1.4.1.2011.6.3.8.1.7 | OCTET STRING | AN | ||||||||||
scalar · OCTET STRING · accessible-for-notify · current User label. | |||||||||||||
| ShwDevVPI | 1.3.6.1.4.1.2011.6.3.8.1.8 | Integer32 | AN | ||||||||||
scalar · Integer32 · accessible-for-notify · current This node is reserved and has no actual meaning. | |||||||||||||
| ShwDevVCI | 1.3.6.1.4.1.2011.6.3.8.1.9 | Integer32 | AN | ||||||||||
scalar · Integer32 · accessible-for-notify · current This node is reserved and has no actual meaning. | |||||||||||||
| ShwDevVlanId | 1.3.6.1.4.1.2011.6.3.8.1.10 | Integer32 | AN | ||||||||||
scalar · Integer32 · accessible-for-notify · current This node is reserved and has no actual meaning. | |||||||||||||
| ShwFrameTypeConfigured | 1.3.6.1.4.1.2011.6.3.8.1.11 | HWFrameType | AN | ||||||||||
scalar · HWFrameType · accessible-for-notify · current Type of the frame that is configured in database of device. | |||||||||||||
| ShwActualSlotTypeName | 1.3.6.1.4.1.2011.6.3.8.1.12 | OCTET STRING (SIZE (0..64)) | AN | ||||||||||
scalar · OCTET STRING (SIZE (0..64)) · accessible-for-notify · current Type and name of the inserted board. | |||||||||||||
| ShwOldDeviceIpAddr | 1.3.6.1.4.1.2011.6.3.8.1.13 | IpAddress | AN | ||||||||||
scalar · IpAddress · accessible-for-notify · current Old IP address of the device. | |||||||||||||
| ShwNewDeviceIpAddr | 1.3.6.1.4.1.2011.6.3.8.1.14 | IpAddress | AN | ||||||||||
scalar · IpAddress · accessible-for-notify · current New IP address of the device. | |||||||||||||
| ShwOldSubslotType0 | 1.3.6.1.4.1.2011.6.3.8.1.15 | HWSubPCBType | AN | ||||||||||
scalar · HWSubPCBType · accessible-for-notify · current Type of the first daughter board that is used previously. | |||||||||||||
| ShwOldSubslotType1 | 1.3.6.1.4.1.2011.6.3.8.1.16 | HWSubPCBType | AN | ||||||||||
scalar · HWSubPCBType · accessible-for-notify · current Type of the second daughter board that is used previously. | |||||||||||||
| ShwOldSubslotType2 | 1.3.6.1.4.1.2011.6.3.8.1.17 | HWSubPCBType | AN | ||||||||||
scalar · HWSubPCBType · accessible-for-notify · current Type of the third daughter board that is used previously. | |||||||||||||
| ShwOldSubslotType3 | 1.3.6.1.4.1.2011.6.3.8.1.18 | HWSubPCBType | AN | ||||||||||
scalar · HWSubPCBType · accessible-for-notify · current Type of the fourth daughter board that is used previously. | |||||||||||||
| ShwDevStandbyMainSlotTypeName | 1.3.6.1.4.1.2011.6.3.8.1.19 | OCTET STRING | AN | ||||||||||
scalar · OCTET STRING · accessible-for-notify · current Slot information description, to describe standby main board name information of the slot. | |||||||||||||
| ThwDevConfPreviousTable | 1.3.6.1.4.1.2011.6.3.8.1.20 | NA | |||||||||||
table · not-accessible · current Previous Device querying table. It is used to query barcode and name of previous device which was replaced by a new one. The indexes of this table are hwFrameIndex and hwSlotIndex. | |||||||||||||
| RhwDevConfPreviousEntry | 1.3.6.1.4.1.2011.6.3.8.1.20.1 | NA | |||||||||||
row · not-accessible · current Previous Device querying table. It is used to query barcode and name of previous device which was replaced by a new one. The indexes of this entry are hwFrameIndex and hwSlotIndex.
| |||||||||||||
| ChwDevPreSlotTypeName | 1.3.6.1.4.1.2011.6.3.8.1.20.1.1 | OCTET STRING | AN | ||||||||||
column · OCTET STRING · accessible-for-notify · current Slot information description, to describe previous board name information of the slot. The indexes of the entry are hwFrameIndex and hwSlotIndex. | |||||||||||||
| ChwDevPreSlotPhySerialNum | 1.3.6.1.4.1.2011.6.3.8.1.20.1.2 | OCTET STRING | AN | ||||||||||
column · OCTET STRING · accessible-for-notify · current The vendor-specific serial number string for the previous board of the slot. The preferred value is the serial number string actually printed on the component itself. The indices of the entry are hwFrameIndex and hwSlotIndex. | |||||||||||||
| ThwSystemResParaTable | 1.3.6.1.4.1.2011.6.3.8.1.21 | NA | |||||||||||
table · not-accessible · current The index of this table is hwResTypePara. System resource table. | |||||||||||||
| RhwSystemResParaEntry | 1.3.6.1.4.1.2011.6.3.8.1.21.1 | NA | |||||||||||
row · not-accessible · current The index of this entry is hwResTypePara. System resource table.
| |||||||||||||
| ChwResTypePara | 1.3.6.1.4.1.2011.6.3.8.1.21.1.1 | INTEGER | AN | ||||||||||
column · INTEGER · accessible-for-notify · current System resource type. Options: 1. memory(1) -indicates the memory resource 2. messageUnits(2)-indicates the message resource 3. cpu(3) -indicates the CPU resource
| |||||||||||||
| ChwResOccupancyPara | 1.3.6.1.4.1.2011.6.3.8.1.21.1.2 | Integer32 (0..100) | AN | ||||||||||
column · Integer32 (0..100) · accessible-for-notify · current System resource occupancy. | |||||||||||||
| ShwTrapStorageName | 1.3.6.1.4.1.2011.6.3.8.1.22 | OCTET STRING | AN | ||||||||||
scalar · OCTET STRING · accessible-for-notify · current The first para of storage fault, which describe the storage name. | |||||||||||||
| ShwExtendBoardFrameIndex | 1.3.6.1.4.1.2011.6.3.8.1.23 | Integer32 | AN | ||||||||||
scalar · Integer32 · accessible-for-notify · current The frame index of the port connecting the main frame to the extended frame. | |||||||||||||
| ShwExtendedFrameUplinkPort | 1.3.6.1.4.1.2011.6.3.8.1.24 | Integer32 | AN | ||||||||||
scalar · Integer32 · accessible-for-notify · current Another uplink port of extended frame. | |||||||||||||
| ShwExtendBoardSlotIndex | 1.3.6.1.4.1.2011.6.3.8.1.25 | Integer32 | AN | ||||||||||
scalar · Integer32 · accessible-for-notify · current The slot index of the port connecting the main frame to the extended frame. | |||||||||||||
| ShwExtendBoardPortIndex | 1.3.6.1.4.1.2011.6.3.8.1.26 | Integer32 | AN | ||||||||||
scalar · Integer32 · accessible-for-notify · current The port index of the port connecting the main frame to the extended frame. | |||||||||||||
| ShwTrapHardFaultName | 1.3.6.1.4.1.2011.6.3.8.1.27 | OCTET STRING | AN | ||||||||||
scalar · OCTET STRING · accessible-for-notify · current The name of board hard fault. | |||||||||||||
| ShwTrapHardFaultEffect | 1.3.6.1.4.1.2011.6.3.8.1.28 | OCTET STRING | AN | ||||||||||
scalar · OCTET STRING · accessible-for-notify · current The effect of board hard fault. | |||||||||||||
| ShwSlotInputIdIndex | 1.3.6.1.4.1.2011.6.3.8.1.29 | Integer32 (0..255) | AN | ||||||||||
scalar · Integer32 (0..255) · accessible-for-notify · current Input Circuit Index. | |||||||||||||
| ShwSlotInputType | 1.3.6.1.4.1.2011.6.3.8.1.30 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current Voltage Input Type. Options: 1. localac(1) -local ac type. 2. localdc(2) -local dc type. 3. remoteac(3) -remote ac type. 4. remotedc(4) -remote dc type. 5. pd(5) -pd type. 6. channelvoltage(6) - channel voltage type.
| |||||||||||||
| ShwDevAutoDeployPhase | 1.3.6.1.4.1.2011.6.3.8.1.31 | DisplayString | AN | ||||||||||
scalar · DisplayString · accessible-for-notify · current Auto-deployment phase: 1. Download the auto-deployment policy file 2. Parse the auto-deployment policy file 3. Download the upgrade software 4. Download the configuration file 5. Download common configuration scripts 6. Download customized configuration scripts 7. Issue the automatic backup configuration 8. Download the database 9. Save the database and configuration file | |||||||||||||
| ShwVccLocalChassisId | 1.3.6.1.4.1.2011.6.3.8.1.32 | Unsigned32 | AN | ||||||||||
scalar · Unsigned32 · accessible-for-notify · current The index of local chassis. | |||||||||||||
| ShwVccNeighbourChassisId | 1.3.6.1.4.1.2011.6.3.8.1.33 | Unsigned32 | AN | ||||||||||
scalar · Unsigned32 · accessible-for-notify · current The index of neighbour chassis. | |||||||||||||
| ShwVccGroupId | 1.3.6.1.4.1.2011.6.3.8.1.34 | Unsigned32 | AN | ||||||||||
scalar · Unsigned32 · accessible-for-notify · current The index of data channel. | |||||||||||||
| ShwVccLinkIfPhysicIndex | 1.3.6.1.4.1.2011.6.3.8.1.35 | Unsigned32 | AN | ||||||||||
scalar · Unsigned32 · accessible-for-notify · current The index of interface for the data link. | |||||||||||||
| ShwVccLinkIfPhysicName | 1.3.6.1.4.1.2011.6.3.8.1.36 | OCTET STRING | AN | ||||||||||
scalar · OCTET STRING · accessible-for-notify · current The name of interface for the data link. | |||||||||||||
| ShwTrapPowerPortIndex | 1.3.6.1.4.1.2011.6.3.8.1.37 | Integer32 | AN | ||||||||||
scalar · Integer32 · accessible-for-notify · current The index of power port. | |||||||||||||
| ShwDevTempMinorAlmThreshold | 1.3.6.1.4.1.2011.6.3.8.1.38 | OCTET STRING | AN | ||||||||||
scalar · OCTET STRING · accessible-for-notify · current The level-1 high temperature alarm threshold. | |||||||||||||
| ShwDevTempMajorAlmThreshold | 1.3.6.1.4.1.2011.6.3.8.1.39 | OCTET STRING | AN | ||||||||||
scalar · OCTET STRING · accessible-for-notify · current The level-2 high temperature alarm threshold. | |||||||||||||
| ShwDevTempCriticalAlmThreshold | 1.3.6.1.4.1.2011.6.3.8.1.40 | OCTET STRING | AN | ||||||||||
scalar · OCTET STRING · accessible-for-notify · current The level-3 high temperature alarm threshold. | |||||||||||||
| ShwDeviceCurrentTemp | 1.3.6.1.4.1.2011.6.3.8.1.41 | OCTET STRING | AN | ||||||||||
scalar · OCTET STRING · accessible-for-notify · current The current temperature of the device. | |||||||||||||
| ShwDevSnmpHostIpAddress | 1.3.6.1.4.1.2011.6.3.8.1.42 | InetAddress | AN | ||||||||||
scalar · InetAddress · accessible-for-notify · current The IP address of SNMP probe abnormal record. | |||||||||||||
| ShwDevSnmpLastReceivedTime | 1.3.6.1.4.1.2011.6.3.8.1.43 | DateAndTime | AN | ||||||||||
scalar · DateAndTime · accessible-for-notify · current The last probe time of SNMP probe abnormal record. | |||||||||||||
| ShwDevSnmpAverageInterval | 1.3.6.1.4.1.2011.6.3.8.1.44 | Integer32 | AN | ||||||||||
scalar · Integer32 · accessible-for-notify · current The average interval of SNMP probe abnormal record. | |||||||||||||
| ShwDevSnmpMinimumInterval | 1.3.6.1.4.1.2011.6.3.8.1.45 | Integer32 | AN | ||||||||||
scalar · Integer32 · accessible-for-notify · current The minimum interval of SNMP probe abnormal record. | |||||||||||||
| ShwDevSnmpMaxmumInterval | 1.3.6.1.4.1.2011.6.3.8.1.46 | Integer32 | AN | ||||||||||
scalar · Integer32 · accessible-for-notify · current The maxmum interval of SNMP probe abnormal record. | |||||||||||||
| ShwDevSnmpReceivedCount | 1.3.6.1.4.1.2011.6.3.8.1.47 | Integer32 | AN | ||||||||||
scalar · Integer32 · accessible-for-notify · current The connection count of SNMP probe abnormal record. | |||||||||||||
| ShwSubboardID | 1.3.6.1.4.1.2011.6.3.8.1.48 | Integer32 | AN | ||||||||||
scalar · Integer32 · accessible-for-notify · current The index ID of sub board. | |||||||||||||
| ShwPowerSupplyChannelVoltage | 1.3.6.1.4.1.2011.6.3.8.1.49 | OCTET STRING | AN | ||||||||||
scalar · OCTET STRING · accessible-for-notify · current The value of power supply channel voltage. | |||||||||||||
| ShwPowerSupplyDescription | 1.3.6.1.4.1.2011.6.3.8.1.50 | OCTET STRING | AN | ||||||||||
scalar · OCTET STRING · accessible-for-notify · current The description of power supply. | |||||||||||||
| ShwBrokenFileName | 1.3.6.1.4.1.2011.6.3.8.1.51 | OCTET STRING | AN | ||||||||||
scalar · OCTET STRING · accessible-for-notify · current The name of broken file. | |||||||||||||
| ShwRtuRunCapacity | 1.3.6.1.4.1.2011.6.3.8.1.52 | Integer32 | AN | ||||||||||
scalar · Integer32 · accessible-for-notify · current The run capacity of system. | |||||||||||||
| ShwRtuLicenseCapcity | 1.3.6.1.4.1.2011.6.3.8.1.53 | Integer32 | AN | ||||||||||
scalar · Integer32 · accessible-for-notify · current The run capacity of license. | |||||||||||||
| ShwDevAntiTheftStatus | 1.3.6.1.4.1.2011.6.3.8.1.54 | OCTET STRING | AN | ||||||||||
scalar · OCTET STRING · accessible-for-notify · current Anti-theft status of the device. | |||||||||||||
| ShwDevAntiTheftTrapReason | 1.3.6.1.4.1.2011.6.3.8.1.55 | OCTET STRING | AN | ||||||||||
scalar · OCTET STRING · accessible-for-notify · current This object indicates the cause of the trap. | |||||||||||||
| ShwVersionName | 1.3.6.1.4.1.2011.6.3.8.1.56 | OCTET STRING | AN | ||||||||||
scalar · OCTET STRING · accessible-for-notify · current The software package version. | |||||||||||||
| ShwPowerThreshold | 1.3.6.1.4.1.2011.6.3.8.1.57 | OCTET STRING | AN | ||||||||||
scalar · OCTET STRING · accessible-for-notify · current The threshold of power. | |||||||||||||
| ShwRemainingPowerSupplyCapability | 1.3.6.1.4.1.2011.6.3.8.1.58 | OCTET STRING | AN | ||||||||||
scalar · OCTET STRING · accessible-for-notify · current Remaining power supply capability. | |||||||||||||
| ShwRegisterFrameTypeName | 1.3.6.1.4.1.2011.6.3.8.1.59 | OCTET STRING (SIZE (0..64)) | AN | ||||||||||
scalar · OCTET STRING (SIZE (0..64)) · accessible-for-notify · current The actual standby frame type. | |||||||||||||
| ShwCheckType | 1.3.6.1.4.1.2011.6.3.8.1.60 | OCTET STRING | AN | ||||||||||
scalar · OCTET STRING · accessible-for-notify · current This object indicates the type of the trap. | |||||||||||||
| ShwDevIntegrityCheckFileType | 1.3.6.1.4.1.2011.6.3.8.1.61 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Type of the integrity check fileType. Options: 1.configurationFile(1) -configuration file.
| |||||||||||||
| NhwDevCommonTraps | 1.3.6.1.4.1.2011.6.3.8.2 | ||||||||||||
| NhwDevCommonTrapsPrefix | 1.3.6.1.4.1.2011.6.3.8.2.0 | ||||||||||||
| !hwDevBoardDetectTrap | 1.3.6.1.4.1.2011.6.3.8.2.0.1 | ||||||||||||
notification · current This trap message is reported when a board is detected. | |||||||||||||
| !hwDevBoardDisappearedTrap | 1.3.6.1.4.1.2011.6.3.8.2.0.2 | ||||||||||||
notification · current This trap message is reported when a board disappears.
| |||||||||||||
| !hwDevBoardStateChangedTrap | 1.3.6.1.4.1.2011.6.3.8.2.0.3 | ||||||||||||
notification · current This trap message is reported when a board's state changes. | |||||||||||||
| !hwDevBoardStaChgOffLineTrap | 1.3.6.1.4.1.2011.6.3.8.2.0.4 | ||||||||||||
notification · current This trap message is reported when a board's state changes from online to offline. | |||||||||||||
| !hwDevBoardAutoLoadTrap | 1.3.6.1.4.1.2011.6.3.8.2.0.5 | ||||||||||||
notification · current This trap message is reported when a board starts to autoload. | |||||||||||||
| !hwDevUserlabelChangeTrap | 1.3.6.1.4.1.2011.6.3.8.2.0.6 | ||||||||||||
notification · current This trap message is reported when a board's userlabel changes. The binding parameters hwDevVPI, hwDevVCI and hwDevVlanId are reserved and have no actual meaning. | |||||||||||||
| !hwDevSystemStateChangeTrap | 1.3.6.1.4.1.2011.6.3.8.2.0.7 | ||||||||||||
notification · current This trap message is reported when the system state changes.
| |||||||||||||
| !hwDevFrameDetectTrap | 1.3.6.1.4.1.2011.6.3.8.2.0.8 | ||||||||||||
notification · current This trap message is reported when a frame is detected. | |||||||||||||
| !hwDevFrameDisappearedTrap | 1.3.6.1.4.1.2011.6.3.8.2.0.9 | ||||||||||||
notification · current This trap message is reported when a frame disappears. | |||||||||||||
| !hwDevFrameStateChangeTrap | 1.3.6.1.4.1.2011.6.3.8.2.0.10 | ||||||||||||
notification · current This trap message is reported when a frame's state changes. | |||||||||||||
| !hwDevExtendedFramePortChangeTrap | 1.3.6.1.4.1.2011.6.3.8.2.0.11 | ||||||||||||
notification · current This trap message is reported when a extended frame's uplink port changes. | |||||||||||||
| !hwDevSnmpProbeRecordTrap | 1.3.6.1.4.1.2011.6.3.8.2.0.12 | ||||||||||||
notification · current This trap message is reported when the abnormal record of SNMP probe monitor occurs. | |||||||||||||
| !hwDevStackFrameStateChangeTrap | 1.3.6.1.4.1.2011.6.3.8.2.0.13 | ||||||||||||
notification · current This trap message is reported when a frame's state changes.
| |||||||||||||
| NhwDevAlarmTraps | 1.3.6.1.4.1.2011.6.3.8.3 | ||||||||||||
| NhwDevSystemTraps | 1.3.6.1.4.1.2011.6.3.8.3.1 | ||||||||||||
| NhwDevSystemTrapsPrefix | 1.3.6.1.4.1.2011.6.3.8.3.1.0 | ||||||||||||
| !hwDevSystemDataSynCancelTrap | 1.3.6.1.4.1.2011.6.3.8.3.1.0.2 | ||||||||||||
notification · current This trap message is reported when the data synchronization between the active and standby control boards is canceled. The first hwSlotIndex indicates active main board index, the second hwSlotIndex indicates standby main board index.
| |||||||||||||
| !hwDevActiveStandbyContolBoardInconsistentTrap | 1.3.6.1.4.1.2011.6.3.8.3.1.0.3 | ||||||||||||
notification · current This trap message is reported when the active control board type is inconsistent with standby ctrol board type. | |||||||||||||
| !hwDevActiveStandbyDataSynCancelTrap | 1.3.6.1.4.1.2011.6.3.8.3.1.0.5 | ||||||||||||
notification · current This trap message is reported when the data synchronization between the active and standby control boards is canceled. The first hwSlotIndex indicates active main board index, the second hwSlotIndex indicates standby main board index.
| |||||||||||||
| !hwDevActiveStandbyDataSynCancelRecoverTrap | 1.3.6.1.4.1.2011.6.3.8.3.1.0.6 | ||||||||||||
notification · current This trap message is reported when the data synchronization between the active and standby control boards recovers. The first hwSlotIndex indicates active main board index, the second hwSlotIndex indicates standby main board index.
| |||||||||||||
| !hwDevSystemPoweroffTrap | 1.3.6.1.4.1.2011.6.3.8.3.1.0.7 | ||||||||||||
notification · current This trap message is reported when the device is cut off. | |||||||||||||
| !hwDevSystemAutoDeployFailTrap | 1.3.6.1.4.1.2011.6.3.8.3.1.0.8 | ||||||||||||
notification · current This trap message is reported when the auto-deployment fails.
| |||||||||||||
| !hwDevSystemDeviceNameChangeTrap | 1.3.6.1.4.1.2011.6.3.8.3.1.0.9 | ||||||||||||
notification · current This trap message is reported when the device name is changed. | |||||||||||||
| NhwDevFrameTraps | 1.3.6.1.4.1.2011.6.3.8.3.2 | ||||||||||||
| NhwDevFrameTrapsPrefix | 1.3.6.1.4.1.2011.6.3.8.3.2.0 | ||||||||||||
| !hwDevFrameTypeInconsistentTrap | 1.3.6.1.4.1.2011.6.3.8.3.2.0.1 | ||||||||||||
notification · current This trap message is reported when the actual shelf type is inconsistent with the configuration in the database of device. In this case, the configuration data delivery fails.
| |||||||||||||
| !hwDevFrameRestoreTrap | 1.3.6.1.4.1.2011.6.3.8.3.2.0.2 | ||||||||||||
notification · current This trap message is reported when the communication of the frame restored. | |||||||||||||
| !hwDevFrameFaultTrap | 1.3.6.1.4.1.2011.6.3.8.3.2.0.3 | ||||||||||||
notification · current This trap message is reported when the communication of the frame interrupted, the services in the frame fail. | |||||||||||||
| !hwDevExtendedFrameTypeInconsistentTrap | 1.3.6.1.4.1.2011.6.3.8.3.2.0.4 | ||||||||||||
notification · current This trap message is reported when the actual shelf type is inconsistent with the configuration in the database of device. In this case, the configuration data delivery fails. | |||||||||||||
| !hwDevExtendedFrameDyingGaspAlarmTrap | 1.3.6.1.4.1.2011.6.3.8.3.2.0.5 | ||||||||||||
notification · current This trap message is reported when the dying-gasp of the extended frame occurs. | |||||||||||||
| !hwDevExtendedFrameDyingGaspRestoreTrap | 1.3.6.1.4.1.2011.6.3.8.3.2.0.6 | ||||||||||||
notification · current This trap message is reported when the dying-gasp of the extended frame recovers. | |||||||||||||
| !hwDevFrameIdOverLoadTrap | 1.3.6.1.4.1.2011.6.3.8.3.2.0.7 | ||||||||||||
notification · current This trap message is reported when the frame ID exceeded the maximal number. | |||||||||||||
| !hwDevFrameCmtsAntitheftAuthFailTrap | 1.3.6.1.4.1.2011.6.3.8.3.2.0.8 | ||||||||||||
notification · current This trap message is reported when the anti-theft authentication of the extended frame fails. | |||||||||||||
| !hwDevFrameCmtsAntitheftAuthRestoreTrap | 1.3.6.1.4.1.2011.6.3.8.3.2.0.9 | ||||||||||||
notification · current This trap message is reported when the anti-theft authentication of the extended frame succeeds. | |||||||||||||
| !hwVccDataLinkFault | 1.3.6.1.4.1.2011.6.3.8.3.2.0.10 | ||||||||||||
notification · current This object indicates that when the data link goes Down, the device sends a trap. | |||||||||||||
| !hwVccDataLinkFaultResume | 1.3.6.1.4.1.2011.6.3.8.3.2.0.11 | ||||||||||||
notification · current This object indicates that when the data link goes Up, the device sends a trap. | |||||||||||||
| !hwVccDataChannelFault | 1.3.6.1.4.1.2011.6.3.8.3.2.0.12 | ||||||||||||
notification · current This object indicates that when the data channel is down, the device sends a trap. | |||||||||||||
| !hwVccDataChannelFaultResume | 1.3.6.1.4.1.2011.6.3.8.3.2.0.13 | ||||||||||||
notification · current This object indicates that when the data channel goes Up, the device sends a trap. | |||||||||||||
| !hwDeviceHighTemperatureMinorFaultTrap | 1.3.6.1.4.1.2011.6.3.8.3.2.0.14 | ||||||||||||
notification · current This trap message is reported when the device temperature exceeds the level-1 high temperature alarm threshold. | |||||||||||||
| !hwDeviceHighTemperatureMinorRestoreTrap | 1.3.6.1.4.1.2011.6.3.8.3.2.0.15 | ||||||||||||
notification · current This trap message is reported when the device temperature exceeds the threshold for level-1 high temperature alarm recovery. | |||||||||||||
| !hwDeviceHighTemperatureMajorFaultTrap | 1.3.6.1.4.1.2011.6.3.8.3.2.0.16 | ||||||||||||
notification · current This trap message is reported when the device temperature exceeds the level-2 high temperature alarm threshold. | |||||||||||||
| !hwDeviceHighTemperatureMajorRestoreTrap | 1.3.6.1.4.1.2011.6.3.8.3.2.0.17 | ||||||||||||
notification · current This trap message is reported when the device temperature exceeds the threshold for level-2 high temperature alarm recovery. | |||||||||||||
| !hwDeviceHighTemperatureCriticalFaultTrap | 1.3.6.1.4.1.2011.6.3.8.3.2.0.18 | ||||||||||||
notification · current This trap message is reported when the device temperature exceeds the level-3 high temperature alarm threshold. | |||||||||||||
| !hwDeviceHighTemperatureCriticalRestoreTrap | 1.3.6.1.4.1.2011.6.3.8.3.2.0.19 | ||||||||||||
notification · current This trap message is reported when the device temperature exceeds the threshold for level-3 high temperature alarm recovery. | |||||||||||||
| !hwDevStackFrameFaultTrap | 1.3.6.1.4.1.2011.6.3.8.3.2.0.20 | ||||||||||||
notification · current This trap message is reported when the communication of the frame interrupted, the services in the frame fail.
| |||||||||||||
| !hwDevStackFrameRestoreTrap | 1.3.6.1.4.1.2011.6.3.8.3.2.0.21 | ||||||||||||
notification · current This trap message is reported when the communication of the frame restored.
| |||||||||||||
| !hwDevStandbyFrameTypeInconsistentTrap | 1.3.6.1.4.1.2011.6.3.8.3.2.0.22 | ||||||||||||
notification · current This trap message is reported when the standby frame type is inconsistent with the active frame. | |||||||||||||
| !hwFwdChannelFault | 1.3.6.1.4.1.2011.6.3.8.3.2.0.23 | ||||||||||||
notification · current This trap message is reported when the forwarding channel detected fault.
| |||||||||||||
| !hwFwdChannelFaultResume | 1.3.6.1.4.1.2011.6.3.8.3.2.0.24 | ||||||||||||
notification · current This trap message is reported when the forwarding channel fault recovery.
| |||||||||||||
| !hwDevTlsCertifyFailTrap | 1.3.6.1.4.1.2011.6.3.8.3.2.0.26 | ||||||||||||
notification · current This trap message is reported when the tls certify failed.
| |||||||||||||
| !hwDevTlsCertifyRestoreTrap | 1.3.6.1.4.1.2011.6.3.8.3.2.0.27 | ||||||||||||
notification · current This trap message is reported when the tls certify recovered.
| |||||||||||||
| !hwDevExtendedFrameRestoreTrap | 1.3.6.1.4.1.2011.6.3.8.3.2.0.28 | ||||||||||||
notification · current This trap message is reported when the communication of the frame restored. | |||||||||||||
| !hwDevExtendedFrameFaultTrap | 1.3.6.1.4.1.2011.6.3.8.3.2.0.29 | ||||||||||||
notification · current This trap message is reported when the communication between the slave frame and the master frame is abnormal, the services in the slave frame fail. | |||||||||||||
| NhwDevBoardTraps | 1.3.6.1.4.1.2011.6.3.8.3.3 | ||||||||||||
| NhwDevBoardTrapsPrefix | 1.3.6.1.4.1.2011.6.3.8.3.3.0 | ||||||||||||
| !hwDevBoardMisMatchTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.1 | ||||||||||||
notification · current This trap message is reported when the type of the board that the user configured is inconsistent with the type of the board that is actually inserted. | |||||||||||||
| !hwDevBoardFaultTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.3 | ||||||||||||
notification · current This trap message is reported when the communication of the board interrupted, the services in the board fail.
| |||||||||||||
| !hwDevBoardRestoreTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.4 | ||||||||||||
notification · current This trap message is reported when the communication of the board restored.
| |||||||||||||
| !hwDevBoardReplacedTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.5 | ||||||||||||
notification · current This trap message is reported when the board is successfully replaced by another board of the same type. | |||||||||||||
| !hwDevBoardEnterTemperatureProctectModeTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.6 | ||||||||||||
notification · current This trap message is reported when the temperature of active control board is too high, all the LAN switch ports of the service board will be powered off except GIU board.
| |||||||||||||
| !hwDevBoardExitTemperatureProctectModeTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.7 | ||||||||||||
notification · current This trap message is reported when the temperature of active control board recovers to safe region from high temperature risk region, all the LAN switch ports of the service board will be powered on.
| |||||||||||||
| !hwDevBoardTemperatureTooHighTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.8 | ||||||||||||
notification · current This trap message is reported when the current temperature of service board exceed the high temperature threshold.
| |||||||||||||
| !hwDevBoardTemperatureTooHighRecoverTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.9 | ||||||||||||
notification · current This trap message is reported when the current temperature of service board recovers to the normal range from high temperature.
| |||||||||||||
| !hwDevBoardTemperatureTooLowTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.10 | ||||||||||||
notification · current This trap message is reported when the current temperature of service board is exceed the low temperature threshold.
| |||||||||||||
| !hwDevBoardTemperatureTooLowRecoverTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.11 | ||||||||||||
notification · current This trap message is reported when the current temperature of service board recovers to normal range from low temperature.
| |||||||||||||
| !hwDevPowerInputFaultTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.12 | ||||||||||||
notification · current This trap message is reported when the power input of the local shelf fails.
| |||||||||||||
| !hwDevPowerInputRecoverTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.13 | ||||||||||||
notification · current This trap message is reported when the power input of the local shelf Recovers.
| |||||||||||||
| !hwDevBoardOnlineStateTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.14 | ||||||||||||
notification · current This trap message is reported when the state of the board is online.
| |||||||||||||
| !hwDevBoardPower5VFaultTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.16 | ||||||||||||
notification · current This trap message is reported when the inner power of the board is abnormal.
| |||||||||||||
| !hwDevBoardPower5VResumeTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.17 | ||||||||||||
notification · current This trap message is reported when the inner power of the board resumes.
| |||||||||||||
| !hwDevStorageFaultTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.18 | ||||||||||||
notification · current This trap message is reported when the certain storage is hardware fault or software fault.
| |||||||||||||
| !hwDevStorageFaultRestoreTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.21 | ||||||||||||
notification · current This trap message is reported when the certain storage is hardware fault or software fault recovers.
| |||||||||||||
| !hwFtpConfigureTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.22 | ||||||||||||
notification · current This trap message is reported when the board need automatic expand.
| |||||||||||||
| !hwDevBoardAutomaticExpandFailTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.23 | ||||||||||||
notification · current This trap message is reported when the board automatic expand fail.
| |||||||||||||
| !hwDevBoardAutomaticExpandRestoreTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.24 | ||||||||||||
notification · current This trap message is reported when the board automatic expand fail recovers.
| |||||||||||||
| !hwDevBoardInputFaultTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.26 | ||||||||||||
notification · current This trap message is reported when the input voltage of a line cannot be detected. | |||||||||||||
| !hwDevBoardInputRecoverTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.27 | ||||||||||||
notification · current This trap message is reported when detected power unit singals recover. | |||||||||||||
| !hwDevPowerLackVoltageFaultTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.28 | ||||||||||||
notification · current This trap message is reported when remote power supply input is under-voltage. | |||||||||||||
| !hwDevPowerLackVolitageRecoverTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.29 | ||||||||||||
notification · current This trap message is reported when voltage in the subrack recovers. | |||||||||||||
| !hwDevBoardReplaceFailTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.30 | ||||||||||||
notification · current This trap message is reported when the original board failed to replace with a new board. | |||||||||||||
| !hwDevPowerPortInputFaultTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.31 | ||||||||||||
notification · current This trap message is reported when the power input of the local shelf fails.
| |||||||||||||
| !hwDevPowerPortInputRecoverTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.32 | ||||||||||||
notification · current This trap message is reported when the power input of the local shelf Recovers.
| |||||||||||||
| !hwDevPowerPortInputUnderVolFaultTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.33 | ||||||||||||
notification · current This trap message is reported when the input power of the subrack is undervoltage.
| |||||||||||||
| !hwDevPowerPortInputUnderVolRecoverTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.34 | ||||||||||||
notification · current This trap message is reported when the undervoltage power input of the subrack recovers.
| |||||||||||||
| !hwDevImportantFileBrokenTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.35 | ||||||||||||
notification · current This trap message is reported when the important file is broken.
| |||||||||||||
| !hwDevImportantFileBrokenRestoreTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.36 | ||||||||||||
notification · current This trap message is reported when the important file is recovery.
| |||||||||||||
| !hwDevRtuLicCapacityExceedFaultTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.37 | ||||||||||||
notification · current This trap message is reported when the running Rtu capacity exceed the license resource. | |||||||||||||
| !hwDevRtuLicCapacityExceedRestoreTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.38 | ||||||||||||
notification · current This trap message is reported when the running Rtu capacity restore to the same the license resource. | |||||||||||||
| !hwDevExBiosPasswordFaultTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.39 | ||||||||||||
notification · current This trap message is reported when the extended BIOS password is not set.
| |||||||||||||
| !hwDevExBiosPasswordRecoverTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.40 | ||||||||||||
notification · current This trap message is reported when the extended BIOS password is set.
| |||||||||||||
| !hwDevLoadLowerVersionTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.41 | ||||||||||||
notification · current This trap message is reported when load the lower version package.
| |||||||||||||
| !hwDevPowerOverThresholdFaultTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.42 | ||||||||||||
notification · current This trap message is reported when the maximum power consumption of the current system exceeds the maximum power supply capability threshold. | |||||||||||||
| !hwDevPowerOverThresholdRestoreTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.43 | ||||||||||||
notification · current This trap message is reported when the maximum power consumption of the current system is cleared from the threshold of the maximum power supply capability. | |||||||||||||
| !hwDevBoardIsolatedTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.44 | ||||||||||||
notification · current This trap message is reported when the board is isolated.
| |||||||||||||
| !hwDevBoardIsolatedRecoverTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.45 | ||||||||||||
notification · current This trap message is reported when the isolation of board recovered.
| |||||||||||||
| !hwDevVoiceFileLZMATrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.48 | ||||||||||||
notification · current This trap message is reported when the voice file format does not match the current version.
| |||||||||||||
| !hwDevFileIntegrityCheckFailedTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.49 | ||||||||||||
notification · current This trap message is reported when the file integrity check failed. | |||||||||||||
| !hwDevFileIntegrityCheckSuccessTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.50 | ||||||||||||
notification · current This trap message is reported when the file integrity check success. | |||||||||||||
| !hwDevBoardAddConfigReplaceSuccessTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.51 | ||||||||||||
notification · current This trap message is reported when the board add config replace success. | |||||||||||||
| !hwDevBoardAddConfigReplaceFailTrap | 1.3.6.1.4.1.2011.6.3.8.3.3.0.52 | ||||||||||||
notification · current This trap message is reported when the board add config replace fail. | |||||||||||||
| NhwDevSubBoardTraps | 1.3.6.1.4.1.2011.6.3.8.3.4 | ||||||||||||
| NhwDevSubBoardTrapsPrefix | 1.3.6.1.4.1.2011.6.3.8.3.4.0 | ||||||||||||
| !hwDevSubBoardTypeInconsistentTrap | 1.3.6.1.4.1.2011.6.3.8.3.4.0.1 | ||||||||||||
notification · current This trap message is reported when the configured daughter board type or quantity is not the same as the actual type or quantity.
| |||||||||||||
| !hwDevSubBoardMisMatchTrap | 1.3.6.1.4.1.2011.6.3.8.3.4.0.2 | ||||||||||||
notification · current This trap message is reported when the combination of daughter board type in main control board is not supported. | |||||||||||||
| !hwDevSubBoardReplacedTrap | 1.3.6.1.4.1.2011.6.3.8.3.4.0.3 | ||||||||||||
notification · current This trap message is reported when the board is successfully replaced by another board of the same type. | |||||||||||||
| !hwDevSubBoardTemperatureTooHighTrap | 1.3.6.1.4.1.2011.6.3.8.3.4.0.4 | ||||||||||||
notification · current This trap message is reported when the current temperature of service sub board exceed the high temperature threshold.
| |||||||||||||
| !hwDevSubBoardTemperatureTooHighRecoverTrap | 1.3.6.1.4.1.2011.6.3.8.3.4.0.5 | ||||||||||||
notification · current This trap message is reported when the current temperature of service sub board recovers to the normal range from high temperature.
| |||||||||||||
| !hwDevSubBoardFaultTrap | 1.3.6.1.4.1.2011.6.3.8.3.4.0.6 | ||||||||||||
notification · current This trap message is reported when the communication of the board interrupted.
| |||||||||||||
| !hwDevSubBoardFaultRecoverTrap | 1.3.6.1.4.1.2011.6.3.8.3.4.0.7 | ||||||||||||
notification · current This trap message is reported when the communication of the board restored.
| |||||||||||||
| !hwDevSubBoardActStdInconsistentTrap | 1.3.6.1.4.1.2011.6.3.8.3.4.0.8 | ||||||||||||
notification · current This trap message is reported when the subboards on the active and standby control boards are inconsistent. | |||||||||||||
| !hwDevSubBoardActStdInconsistentRestoreTrap | 1.3.6.1.4.1.2011.6.3.8.3.4.0.9 | ||||||||||||
notification · current This trap message is reported when the subboards on the active and standby control boards recover consistent. | |||||||||||||
| NhwDevDiagTraps | 1.3.6.1.4.1.2011.6.3.8.3.5 | ||||||||||||
| NhwDevDiagTrapsPrefix | 1.3.6.1.4.1.2011.6.3.8.3.5.0 | ||||||||||||
| !hwDiagResOverloadFaultTrap | 1.3.6.1.4.1.2011.6.3.8.3.5.0.1 | ||||||||||||
notification · current This trap message is reported when the system resources usage exceeds the threshold The system resources include system CPU, system memory, system messages, and system storage.
| |||||||||||||
| !hwDiagResOverloadRestoreTrap | 1.3.6.1.4.1.2011.6.3.8.3.5.0.2 | ||||||||||||
notification · current This trap message is reported when the system resources usage recovers from the overload state to the normal state.
| |||||||||||||
| NhwDevGeneralTrapsPre | 1.3.6.1.4.1.2011.6.3.8.5 | ||||||||||||
| NhwDevGeneralTraps | 1.3.6.1.4.1.2011.6.3.8.5.0 | ||||||||||||
| !hwFrameAdminResultTrap | 1.3.6.1.4.1.2011.6.3.8.5.0.1 | ||||||||||||
notification · current Frame administration result Trap report | |||||||||||||
| !hwSlotAdminResultTrap | 1.3.6.1.4.1.2011.6.3.8.5.0.2 | ||||||||||||
notification · current Slot administration result Trap report | |||||||||||||
| !hwSubSlotAdminResultTrap | 1.3.6.1.4.1.2011.6.3.8.5.0.3 | ||||||||||||
notification · current Subslot administration result Trap report | |||||||||||||
| !hwPortAdminResultTrap | 1.3.6.1.4.1.2011.6.3.8.5.0.4 | ||||||||||||
notification · current Port administration result Trap report | |||||||||||||
| NhwDevAntiTheftTraps | 1.3.6.1.4.1.2011.6.3.8.6 | ||||||||||||
| NhwDevAntiTheftTrapsPrefix | 1.3.6.1.4.1.2011.6.3.8.6.0 | ||||||||||||
| !hwDevAntiTheftLockTraps | 1.3.6.1.4.1.2011.6.3.8.6.0.1 | ||||||||||||
notification · current This trap message is reported periodically when device anti-theft is locked.
| |||||||||||||
| !hwDevAntiTheftUnAuthTraps | 1.3.6.1.4.1.2011.6.3.8.6.0.2 | ||||||||||||
notification · current This trap message is reported when the device anti-theft is not authorized.
| |||||||||||||
| !hwDevAntiTheftUnAuthResumeTraps | 1.3.6.1.4.1.2011.6.3.8.6.0.3 | ||||||||||||
notification · current This trap message is reported when the device anti-theft is authorized.
| |||||||||||||
| NhwAppBoardPara | 1.3.6.1.4.1.2011.6.3.9 | ||||||||||||
| NhwAppBoardGlobalPara | 1.3.6.1.4.1.2011.6.3.9.1 | ||||||||||||
| ShwAppBoardPhySlot | 1.3.6.1.4.1.2011.6.3.9.1.1 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The location of Application board. | |||||||||||||
| ThwAppBoardMngtTable | 1.3.6.1.4.1.2011.6.3.9.2 | NA | |||||||||||
table · not-accessible · current The index of this table is hwFrameIndex or hwSlotIndex. This is the App Application IP configuration table. This table is used to configure and query the IP configuration mode and IP address of an Application board. | |||||||||||||
| RhwAppBoardMngtEntry | 1.3.6.1.4.1.2011.6.3.9.2.1 | NA | |||||||||||
row · not-accessible · current The index of this entry is hwFrameIndex or hwSlotIndex. This is the App Application IP configuration table. This table is used to configure and query the IP configuration mode and IP address of an Application board.
| |||||||||||||
| ChwAppBoardMngtVlan | 1.3.6.1.4.1.2011.6.3.9.2.1.1 | Integer32 (1..4093) | RW | ||||||||||
column · Integer32 (1..4093) · read-write · current The management VLAN of Application board. Range: 1-4093 | |||||||||||||
| ChwAppBoardMngtIpType | 1.3.6.1.4.1.2011.6.3.9.2.1.2 | InetAddressType | RW | ||||||||||
column · InetAddressType · read-write · current The type of Ip address. IPV4:1 IPV6:2 | |||||||||||||
| ChwAppBoardMngtIp | 1.3.6.1.4.1.2011.6.3.9.2.1.3 | InetAddress | RW | ||||||||||
column · InetAddress · read-write · current The IP address of the Application board | |||||||||||||
| ChwAppBoardMngtMaskLength | 1.3.6.1.4.1.2011.6.3.9.2.1.4 | Integer32 (0..128) | RW | ||||||||||
column · Integer32 (0..128) · read-write · current The mask length of the ip address. Range: 0-128 | |||||||||||||
| ChwAppBoardMngtGateway | 1.3.6.1.4.1.2011.6.3.9.2.1.5 | InetAddress | RW | ||||||||||
column · InetAddress · read-write · current The gateway of the Application board | |||||||||||||
| ChwAppBoardMngtRowStatus | 1.3.6.1.4.1.2011.6.3.9.2.1.6 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current RowStatus standard operation. | |||||||||||||
| NhwCliUserMgmt | 1.3.6.1.4.1.2011.6.3.10 | ||||||||||||
| ThwCliUserParaTable | 1.3.6.1.4.1.2011.6.3.10.1 | NA | |||||||||||
table · not-accessible · current CLI user parameters configuration table. | |||||||||||||
| RhwCliUserParaEntry | 1.3.6.1.4.1.2011.6.3.10.1.1 | NA | |||||||||||
| ChwCliUserName | 1.3.6.1.4.1.2011.6.3.10.1.1.1 | OCTET STRING (SIZE (1..15)) | NA | ||||||||||
column · OCTET STRING (SIZE (1..15)) · not-accessible · current Name of the CLI user. | |||||||||||||
| ChwCliUserPassword | 1.3.6.1.4.1.2011.6.3.10.1.1.2 | OCTET STRING (SIZE (0..15)) | RC | ||||||||||
column · OCTET STRING (SIZE (0..15)) · read-create · current password of the CLI user. | |||||||||||||
| ChwCliUserLevel | 1.3.6.1.4.1.2011.6.3.10.1.1.3 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Level of CLI user(1:common,2:operator,3:administrator).
| |||||||||||||
| ChwCliUserLogins | 1.3.6.1.4.1.2011.6.3.10.1.1.4 | Integer32 (0..4) | RC | ||||||||||
column · Integer32 (0..4) · read-create · current The num of user can login in one time. | |||||||||||||
| ChwCliUserDecr | 1.3.6.1.4.1.2011.6.3.10.1.1.5 | OCTET STRING (SIZE (0..30)) | RC | ||||||||||
column · OCTET STRING (SIZE (0..30)) · read-create · current Description of CLI user. | |||||||||||||
| ChwCliUserRowStatus | 1.3.6.1.4.1.2011.6.3.10.1.1.6 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current Operation status of CLI user,the CLI user can be added,deleted and modified. | |||||||||||||
| ThwCliClientTable | 1.3.6.1.4.1.2011.6.3.10.2 | NA | |||||||||||
table · not-accessible · current CLI client table. | |||||||||||||
| RhwCliClientEntry | 1.3.6.1.4.1.2011.6.3.10.2.1 | NA | |||||||||||
| ChwCliClientID | 1.3.6.1.4.1.2011.6.3.10.2.1.1 | Integer32 (1..5) | NA | ||||||||||
column · Integer32 (1..5) · not-accessible · current Client ID(1..5). | |||||||||||||
| ChwCliClientUserName | 1.3.6.1.4.1.2011.6.3.10.2.1.2 | OCTET STRING (SIZE (1..15)) | RO | ||||||||||
column · OCTET STRING (SIZE (1..15)) · read-only · current User name of client. | |||||||||||||
| ChwCliClientType | 1.3.6.1.4.1.2011.6.3.10.2.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Type of client(1:serial,2:telnet).
| |||||||||||||
| ChwCliClientIp | 1.3.6.1.4.1.2011.6.3.10.2.1.4 | IpAddress | RO | ||||||||||
column · IpAddress · read-only · current The IP address of client. | |||||||||||||
| ChwCliClientLoginTime | 1.3.6.1.4.1.2011.6.3.10.2.1.5 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current Login time of Client. | |||||||||||||
| ChwCliClientAdminStatus | 1.3.6.1.4.1.2011.6.3.10.2.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current admin status of client, can disconnect client.
| |||||||||||||
| NhwDevCompatibleTable | 1.3.6.1.4.1.2011.6.3.11 | ||||||||||||
| ShwCompatibleSysOid | 1.3.6.1.4.1.2011.6.3.11.1 | OBJECT IDENTIFIER | RO | ||||||||||
scalar · OBJECT IDENTIFIER · read-only · current This object indicates the compatible SYSOID of the new NE. | |||||||||||||
| ShwCompatibleVersion | 1.3.6.1.4.1.2011.6.3.11.2 | OCTET STRING (SIZE (0..255)) | RO | ||||||||||
scalar · OCTET STRING (SIZE (0..255)) · read-only · current This object indicates the compatible version of the new NE. | |||||||||||||
| ShwCompatibleVRCB | 1.3.6.1.4.1.2011.6.3.11.3 | OCTET STRING (SIZE (0..255)) | RO | ||||||||||
scalar · OCTET STRING (SIZE (0..255)) · read-only · current The compatible VRCB of new network element. | |||||||||||||
| ShwCompatibleProductName | 1.3.6.1.4.1.2011.6.3.11.4 | OCTET STRING (SIZE (0..255)) | RO | ||||||||||
scalar · OCTET STRING (SIZE (0..255)) · read-only · current This object indicates the name of the compatible product of the new NE. | |||||||||||||
| NhwSysRegister | 1.3.6.1.4.1.2011.6.3.13 | ||||||||||||
| ShwSysHandshakeEnable | 1.3.6.1.4.1.2011.6.3.13.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The switch of periodic handshake between the device and the NMS. The NMS uses the periodic handshake process to check whether the device is properly connected. Default: false Options: 1.nooperation(0) -default shakes hands of the system 2.true(1) -The device periodically shakes hands with the NMS 3.false(2) -The device does not periodically shake hands with the NMS
| |||||||||||||
| ShwSysHandshakeInterval | 1.3.6.1.4.1.2011.6.3.13.2 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current The interval for sending a handshake packet, in unit of minute Note: If the interval for sending a handshake packet is too long, the NMS cannot detect the disconnection between the device and the NMS promptly. If the interval for sending a handshake packet is too short, the number of handshake packets that the NMS needs to handle increases, which adds burden to the NMS. You can set the time interval according to the actual situation. Default: 300 Unit: Seconds
| |||||||||||||
| ShwSysRegisterResponseStatus | 1.3.6.1.4.1.2011.6.3.13.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The NMS response to the periodic handshake packet from the device. Options: 1.nooperation(-1) -default state of the system 2.registering(1) -register is in processing 3.success(2) -The registration/handshake packet reported by the device is successfully handled 4.failure(3) -register failed 5.timeout(4) -register timeout
| |||||||||||||
| NhwCustomizedParameter | 1.3.6.1.4.1.2011.6.3.15 | ||||||||||||
| ThwCustomizedParameterTable | 1.3.6.1.4.1.2011.6.3.15.1 | NA | |||||||||||
table · not-accessible · current The index of this table is hwParaName. Customized parameter table. This table is no longer used. | |||||||||||||
| RhwCustomizedParameterEntry | 1.3.6.1.4.1.2011.6.3.15.1.1 | NA | |||||||||||
row · not-accessible · current The index of this entry is hwParaName. Customized parameter table. This table is no longer used.
| |||||||||||||
| ChwParaName | 1.3.6.1.4.1.2011.6.3.15.1.1.1 | OCTET STRING (SIZE (1..32)) | NA | ||||||||||
column · OCTET STRING (SIZE (1..32)) · not-accessible · current The name of the parameter. This object is no longer used. | |||||||||||||
| ChwParaValue | 1.3.6.1.4.1.2011.6.3.15.1.1.2 | OCTET STRING (SIZE (1..64)) | RC | ||||||||||
column · OCTET STRING (SIZE (1..64)) · read-create · current The value of the parameter. This object is no longer used. | |||||||||||||
| ChwParaState | 1.3.6.1.4.1.2011.6.3.15.1.1.3 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current The overwritten state of the parameter. This object is no longer used. Options: 1.readWrite(1) - read and write 2.readOnly(2) - read only
| |||||||||||||
| ChwParaRowStatus | 1.3.6.1.4.1.2011.6.3.15.1.1.4 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current RowStatus standard operation. This object is no longer used. | |||||||||||||
| NhwAutoReset | 1.3.6.1.4.1.2011.6.3.16 | ||||||||||||
| ThwPingAutoResetTable | 1.3.6.1.4.1.2011.6.3.16.1 | NA | |||||||||||
table · not-accessible · current The index of this table is hwHostIpAddr. Ping auto-reset table. | |||||||||||||
| RhwPingAutoResetEntry | 1.3.6.1.4.1.2011.6.3.16.1.1 | NA | |||||||||||
row · not-accessible · current The index of this entry is hwHostIpAddr. Ping auto-reset table.
| |||||||||||||
| ChwHostIpAddr | 1.3.6.1.4.1.2011.6.3.16.1.1.1 | IpAddress | RO | ||||||||||
column · IpAddress · read-only · current The IP address of monitoring gateway | |||||||||||||
| ChwPacketNumber | 1.3.6.1.4.1.2011.6.3.16.1.1.2 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The number of the PING packets sent during every check, Default value: 5 | |||||||||||||
| ChwIntervalTime | 1.3.6.1.4.1.2011.6.3.16.1.1.3 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The interval of sending PING packets. Default: 1 Unit: second | |||||||||||||
| ChwResponseTime | 1.3.6.1.4.1.2011.6.3.16.1.1.4 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Time-out time for the response of the PING packets. Unit: second Default: 2 | |||||||||||||
| ChwLoopTime | 1.3.6.1.4.1.2011.6.3.16.1.1.5 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Interval between the cyclic checks Default value: 600 Unit: second | |||||||||||||
| ChwFailureThreshold | 1.3.6.1.4.1.2011.6.3.16.1.1.6 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The threshold of checking failed. Default value: 10 | |||||||||||||
| ChwFailedTimes | 1.3.6.1.4.1.2011.6.3.16.1.1.7 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Times of checking failed | |||||||||||||
| ChwAutoResetEnableStatus | 1.3.6.1.4.1.2011.6.3.16.1.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Enable status of auto-reset. Options: 1. enable(1) - enable 2. disable(2) - disable
| |||||||||||||
| ChwAutoResetRowStatus | 1.3.6.1.4.1.2011.6.3.16.1.1.9 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current RowStatus standard operation | |||||||||||||
| NhwSystemResource | 1.3.6.1.4.1.2011.6.3.17 | ||||||||||||
| ThwSystemResTable | 1.3.6.1.4.1.2011.6.3.17.1 | NA | |||||||||||
table · not-accessible · current The index of this table is hwFrameIndex, hwSlotIndex or hwResType. System resource table. | |||||||||||||
| RhwSystemResEntry | 1.3.6.1.4.1.2011.6.3.17.1.1 | NA | |||||||||||
row · not-accessible · current The index of this entry is hwFrameIndex, hwSlotIndex or hwResType. System resource table.
| |||||||||||||
| ChwResType | 1.3.6.1.4.1.2011.6.3.17.1.1.1 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current System resource type. Options: 1. memory(1) -indicates the memory resource 2. messageUnits(2)-indicates the message resource 3. cpu(3) -indicates the CPU resource 4. storage(8) -indicates the storage resource
| |||||||||||||
| ChwResOverLoad | 1.3.6.1.4.1.2011.6.3.17.1.1.2 | Integer32 (0..100) | RW | ||||||||||
column · Integer32 (0..100) · read-write · current System resource overload threshold. The following two system resources support querying and Threshold setting: memory(1), cpu(3). Memory(1) and cpu(3) have limited value ranges. MessageUnits(2) cannot be set or queried. | |||||||||||||
| ChwResOccupancy | 1.3.6.1.4.1.2011.6.3.17.1.1.3 | Integer32 (0..100) | RO | ||||||||||
column · Integer32 (0..100) · read-only · current System resource occupancy. | |||||||||||||
| ShwMemOccupancy | 1.3.6.1.4.1.2011.6.3.17.2 | Integer32 (0..100) | RO | ||||||||||
scalar · Integer32 (0..100) · read-only · current System memory occupancy. | |||||||||||||
| ShwCpuOccupancy | 1.3.6.1.4.1.2011.6.3.17.3 | Integer32 (0..100) | RO | ||||||||||
scalar · Integer32 (0..100) · read-only · current System CPU occupancy. | |||||||||||||
| NhwRingAttrTable | 1.3.6.1.4.1.2011.6.3.18 | ||||||||||||
| ShwRingFrequency | 1.3.6.1.4.1.2011.6.3.18.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Frequency of ring. Options: 1. frequency16HZ(1) --The frequency of ring is 16HZ 2. frequency25HZ(2) --The frequency of ring is 25HZ 3. frequency50HZ(3) --The frequency of ring is 50HZ 4. frequency20HZ(4) --The frequency of ring is 20HZ
| |||||||||||||
| ShwRingacamplitude | 1.3.6.1.4.1.2011.6.3.18.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current AC amplitude of ring. Options: 1. acamplitude74Vrms(1) --The AC amplitude of ring is 74Vrms 2. acamplitude65Vrms(2) --The AC amplitude of ring is 65Vrms 3. acamplitude50Vrms(3) --The AC amplitude of ring is 50Vrms 4. acamplitude75Vrms(4) --The AC amplitude of ring is 75Vrms 5. acamplitude70Vrms(5) --The AC amplitude of ring is 70Vrms
| |||||||||||||
| ShwRingdcbias | 1.3.6.1.4.1.2011.6.3.18.3 | Integer32 (1..2) | RW | ||||||||||
scalar · Integer32 (1..2) · read-write · current DC bias of ring. Options: 1 --The DC bias voltage of ring 20V 2 --The DC bias voltage of ring 30V. | |||||||||||||
| NhwIopacketfile | 1.3.6.1.4.1.2011.6.3.21 | ||||||||||||
| ShwIopacketfileAdminStatus | 1.3.6.1.4.1.2011.6.3.21.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The status of the board software package.
Options:
1. deactivepacketfile(0)-indicates that the status of the board software package is not active.
2. activepacketfile(1) -indicates that active the packet file.
Perform activepacketfile(1), and the system queries all the boards.
If the software version of a board is inconsistent with the version in the package,
the software of the board is upgraded to the version in the package.
Certain boards can be upgraded by a reset operation
| |||||||||||||
| NhwUpgrade | 1.3.6.1.4.1.2011.6.3.22 | ||||||||||||
| ShwUpgradeRequestID | 1.3.6.1.4.1.2011.6.3.22.1 | Integer32 | RW | 0 | |||||||||
scalar · Integer32 · read-write · current The request index for automatic upgrade.
For automatic upgrade:
The NMS loads the NE program of the latest version,
the data or configuration file after upgrade, and the
package of the board to the active control board of the NE system.
The NE automatically loads the NE program,
the data or configuration file after upgrade, and the package,
from the active control board to the standby control board in a synchronous manner.
At this time, the NMS needs to deliver the command of upgrading and resetting
to the active control board.
When resetting the control board, you must specify hwUpgradeRequestID,
hwUpgradeAdmin, hwUpgradeResetInterval.
The operation is saved as a record entry.
hwUpgradeRequestID is used to identify this operation. Therefore,
its value cannot be the same as the operation request ID of another record entry.
The hwUpgradeRequestID value of -1 indicates there is no upgrade going.Example values from LibreNMS test devices
| |||||||||||||
| ShwUpgradeAdmin | 1.3.6.1.4.1.2011.6.3.22.2 | INTEGER | RW | 0 | |||||||||
scalar · INTEGER · read-write · current The command of software active.
Options:
1.nooperation(-1) - default state of the system.
2.uninterruptedAutoUpgrade(1) - uninterrupted auto upgrade.
3.upgradeSchedule(2) - reset system and acitve the software. If you need to active the software
after a certain period,you also need to set hwUpgradeReserveTimeout or
hwUpgradeReserveDateTime.
4.undoUpgradeSchedule(3) - negate the operation to active software.
5.interruptedAutoUpgrade(4) - interrupted auto upgrade.
Example values from LibreNMS test devices
| |||||||||||||
| ShwUpgradeResetInterval | 1.3.6.1.4.1.2011.6.3.22.3 | Integer32 (-1..1440) | RW | 0 | |||||||||
scalar · Integer32 (-1..1440) · read-write · current The interval to force service boards to reset after the upgrade of mainboard has been completed. Unit:minute Example values from LibreNMS test devices
| |||||||||||||
| ShwUpgradeTargetVersion | 1.3.6.1.4.1.2011.6.3.22.4 | OCTET STRING | RW | | |||||||||
scalar · OCTET STRING · read-write · current The target version of automatic upgrade. For example: MA5600V800R003C02. Allow querying the target version only during automatic upgrade. The system configuration management platform is locked during automatic upgrade. When you are setting the target version of an object in an upgrade, you also need to set hwUpgradeRequestID, hwUpgradeAdmin, and hwUpgradeResetInterval. Automatic upgrade requires consistency between the program version saved in the standby area of the system and the set target version. If the target version is not specified, the system performs automatic upgrade according to the version saved in the standby area of the system. Example values from LibreNMS test devices
| |||||||||||||
| ShwUpgradeReserveTimeout | 1.3.6.1.4.1.2011.6.3.22.5 | Integer32 (-1 | 60..604800) | RW | 0 | |||||||||
scalar · Integer32 (-1 | 60..604800) · read-write · current Used to set the delay time of software active, in unit of seconds. When you set hwUpgradeReserveTimeout, you also need to set hwUpgradeAdmin to upgradeSchedule(2). It is invalid to set both hwUpgradeReserveTimeout and hwUpgradeReserveDateTime. The hwUpgradeReserveTimeout value of -1 indicates the delay time of software active is not set. Example values from LibreNMS test devices
| |||||||||||||
| ShwUpgradeReserveDateTime | 1.3.6.1.4.1.2011.6.3.22.6 | DateAndTime | RW | ||||||||||
scalar · DateAndTime · read-write · current This object is used for setting the date and time of software active. When you set hwUpgradeReserveDateTime, you also need to set hwUpgradeAdmin to upgradeSchedule(2). It is invalid to set both hwUpgradeReserveDateTime and hwUpgradeReserveTimeout. The configured time is the local time, and time zone configuration is not supported. | |||||||||||||
| ShwEmergencyCallProtect | 1.3.6.1.4.1.2011.6.3.22.7 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This object is used for setting the emergence call protection function. If this object is set to enable, the system cannot be reset if the system is processing an emergence call. Options: 1.disable(1) - Indicates that the emergence call is disabled. 2.enable(2) - Indicates that the emergence call is enabled.
| |||||||||||||
| ShwUpgradeCapability | 1.3.6.1.4.1.2011.6.3.22.8 | Bits | RO | C0 | |||||||||
scalar · Bits · read-only · current The capability of upgrade. Options: 1.issu(0) - in servers software upgrade. 2.ossu(1) - out of servers softer upgrade. From left to right, each bit indicates a capability of upgrade. If the bit is set to 1, it indicates support the capability. If the bit is set to 0, it indicates not support the capability.
Example values from LibreNMS test devices
| |||||||||||||
| ThwAgentOntInfoTable | 1.3.6.1.4.1.2011.6.3.23 | NA | |||||||||||
table · not-accessible · current The index of this table is hwFrameIndex, hwSlotIndex, hwPortIndex or hwOntIndex. OLT agent ONT INFO table. For hwFrameIndex, refer to hwFrameTable. For hwSlotIndex, refer to hwSlotTable. For hwPortIndex, refer to hwPortTable. | |||||||||||||
| RhwAgentOntInfoEntry | 1.3.6.1.4.1.2011.6.3.23.1 | NA | |||||||||||
row · not-accessible · current The index of this entry is hwFrameIndex, hwSlotIndex, hwPortIndex or hwOntIndex. OLT agent ONT INFO table. For hwFrameIndex, refer to hwFrameTable. For hwSlotIndex, refer to hwSlotTable. For hwPortIndex, refer to hwPortTable.
| |||||||||||||
| ChwOntIndex | 1.3.6.1.4.1.2011.6.3.23.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current ONT ID. Parameters hwFrameIndex and hwSlotIndex are obligatory, hwOntIndex and hwPortIndex are optional (the setting -1 indicates that the parameter is optional). For example, to set the information of all ONTs connected to a specified port returned, you can set hwOntIndex to -1; to set the information about the status of all ONTs connected to all ports of a specified slot returned, you can set hwPortIndex and hwOntIndex to -1 | |||||||||||||
| ChwOntState | 1.3.6.1.4.1.2011.6.3.23.1.2 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current ONT state. data structure: -------------------------------------------------------------------------------------------------- | m | ONT state combination | ONT state combination | | ONT state combination | | (2B) | in Port x | in Port y | ..... | in Port n | -------------------------------------------------------------------------------------------------- / \ / \ / \ ----------------------------------- | x | ONT m-1 | | ONT 0 | |(2B) |state(1b)|...... |state(1b)| ----------------------------------- state enum: normal(0): ONT state is normal. fault(1): ONT state is fault. | |||||||||||||
| ChwOntType | 1.3.6.1.4.1.2011.6.3.23.1.3 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current ONT type. data structure: ONT IP + ONT type ------------------------------------------------------------------- | ONT NUM | ONT IP | ONT type | | ONT IP | ONT type | | (2B) | (4B) | (16B) | ...... | (4B) | (16B) | ------------------------------------------------------------------- Because of the restrictions on the SNMP packet, the packet of up to 8 KB can be transmitted. When the size of the packet to be reported exceeds 8 KB, the packet must be compressed. The compress format of the packet is shown in the following figure. ----------------------------------------------------------------------- | DATA-LENGTH | FLAG | TLV-NUM | TYPE | LEN | CRC | | ------------------------------------------------------------ | | | | | | | ----------------------------------------------------------------------- In the compressed packet: DATA-LENGTH occupies four bytes to store the whole length of the file, including the header structure. FLAG occupies two bytes to store the flag, which indicates the format of the file contents. In this compressed packet, the flag indicates that the format of the file contents is compressed. 0xFEFE indicates compress and 0 indicates non-compress. TLV-NUM indicates the number of TLVs that the file carries. In this compressed packet, TLV-NUM is 1, indicating the CRC value of the compressed content. The following continuous bytes TYPE, LEN, and CRC are data in the TLV format. Each of TYPE, LEN, and CRC occupies two bytes. In this compressed packet, TYPE, LEN, and CRC record the CRC value of the compressed content. TYPE indicates the CRC type. LEN indicates the number of bytes that the CRC occupies and the actual value is 2. CRC stores the CRC value of the compressed content. The actual returned content is compressed in the .zip format and stored in the final field of compressed content. | |||||||||||||
| ChwOntVersion | 1.3.6.1.4.1.2011.6.3.23.1.4 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current ONT version. data structure: ONT IP + ONT version ------------------------------------------------------------------------ | ONT NUM | ONT IP | ONT version | | ONT IP | ONT version | | (2B) | (4B) | (32B) | ...... | (4B) | (32B) | ------------------------------------------------------------------------ | |||||||||||||
| NhwConfigLock | 1.3.6.1.4.1.2011.6.3.24 | ||||||||||||
| ShwConfigLockState | 1.3.6.1.4.1.2011.6.3.24.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Whether the system configuration is locked. Options: 1. locked(1) -the system configuration is locked 2. unlocked(2) -the system configuration is not locked The user who locks the system configuration can unlock it. Super users and the network administrator can forcibly unlock the system configuration. Other users cannot unlock it.
| |||||||||||||
| ShwConfigUnlockInterval | 1.3.6.1.4.1.2011.6.3.24.2 | Integer32 (0..255) | RW | ||||||||||
scalar · Integer32 (0..255) · read-write · current The interval for automatic unlock of the system configuration, in unit of minute.
The system re-counts the time in these two cases: a user successfully locks the
system configuration and the user who locks system configuration sets hwConfigUnlockInterval.
If a user unlocks the system configuration within the automatic unlock interval,
automatic unlock is not necessary. If the system configuration keeps locked,
after the interval elapses, the system automatically unlocks it.
If a NETCONF user successfully locks the system configuration,
the system configuration will not be unlocked automatically,the automatic unlock interval is set as 0.
Default: 5 | |||||||||||||
| ShwConfigLockUserType | 1.3.6.1.4.1.2011.6.3.24.3 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The type of user who locks system configuration. Options: 1. nooperation(-1) -default type of the system 2. nms(1) -the user who access through the NMS 3. series(2) -the user who access through the serial interface 4. telnet(3) -the user who access through telnet 5. web(4) -the user who access through the web user interface 6. xml(5) -the user who access through the XML interface 7. ssh(6) -the user who access through SSH 8. netconf(7) -the user who access through NETCONF
| |||||||||||||
| ShwConfigLockUserName | 1.3.6.1.4.1.2011.6.3.24.4 | OCTET STRING | RO | ||||||||||
scalar · OCTET STRING · read-only · current The user name of the user who locks the configuration platform. | |||||||||||||
| ShwConfigLockUserIPAddr | 1.3.6.1.4.1.2011.6.3.24.5 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current The IP address of the user who locks the configuration platform.
If a user who accesses through the serial port locks the configuration platform,
the IP address is default value.
DEFVAL { 255.255.255.255 } | |||||||||||||
| ShwConfigLockOperate | 1.3.6.1.4.1.2011.6.3.24.6 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The operation to lock or unlock config.
Options:
1. lock(1) -before data configuration, use lock(1) to lock the configuration platform,
preventing other users from modifying or deleting the configuration data just completed
2. unlock(2) -when the data configuration is complete, use unlock(2) to unlock the configuration platform.
After that, other users can configure the system data
If a user performs lock(1) and does not perform unlock(2) after data configuration,
the system automatically unlocks after a certain period.
For the interval for automatic unlock, refer to hwConfigUnlockInterval.
| |||||||||||||
| ShwConfigLockUserInetAddressType | 1.3.6.1.4.1.2011.6.3.24.7 | InetAddressType | RO | ||||||||||
scalar · InetAddressType · read-only · current The type of address in hwConfigLockUserInetAddress.
Options:
1. unknown(0) -If a user who accesses through the serial port locks the configuration platform,
the IP address type is unknown(0).
2. ipv4(1) -indicates that the IP address type is ipv4.
3. ipv6(2) -indicates that the IP address type is ipv6.
| |||||||||||||
| ShwConfigLockUserInetAddress | 1.3.6.1.4.1.2011.6.3.24.8 | InetAddress | RO | ||||||||||
scalar · InetAddress · read-only · current The IP address of the user who locks the configuration platform.
If a user who accesses through the serial port locks the configuration platform,
the IP address is default value.
DEFVAL { zero-length } | |||||||||||||
| NhwIntelligentPhoneParaTable | 1.3.6.1.4.1.2011.6.3.25 | ||||||||||||
| ShwIntelligentPhoneMode | 1.3.6.1.4.1.2011.6.3.25.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The switch of Intelligent-phone mode: disable or enable.
DEFVAL { disable }
Options:
1. disable(1) -if it is set to disable(1), the settings of hwAttenuation and hwDetectionThreshold
are not applied
2.enable(2) -if it is set to enable(2), the settings of hwAttenuation and hwDetectionThreshold
take effect in the intelligent pay phone service (IPP)
| |||||||||||||
| ShwAttenuation | 1.3.6.1.4.1.2011.6.3.25.2 | Integer32 (0..14) | RW | ||||||||||
scalar · Integer32 (0..14) · read-write · current The value of Intelligent-signal attenuation: 0 dBm to 14 dBm.
From 0 to 14 independently indicates form 0 dBm to 14 dBm.
Default: 5 dBm.
DEFVAL { 5 } | |||||||||||||
| ShwDetectionThreshold | 1.3.6.1.4.1.2011.6.3.25.3 | Integer32 (0..28) | RW | ||||||||||
scalar · Integer32 (0..28) · read-write · current The threshold of intelligent-signal detection: 0 dBm to 28 dBm.
From 0 to 28 independently indicates form 0 dBm to -28 dBm.
Default: -15 dBm.
DEFVAL { 15 } | |||||||||||||
| ThwPstnBoardCfgTable | 1.3.6.1.4.1.2011.6.3.26 | NA | |||||||||||
table · not-accessible · current The index of this table is hwFrameIndex or hwSlotIndex. PstnBoard config table. | |||||||||||||
| RhwPstnBoardCfgEntry | 1.3.6.1.4.1.2011.6.3.26.1 | NA | |||||||||||
row · not-accessible · current The index of this entry is hwFrameIndex or hwSlotIndex. PstnBoard config table.
| |||||||||||||
| ChwPowerMode | 1.3.6.1.4.1.2011.6.3.26.1.1 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Indicates the power-mode of the board. Options: 1. generalMode(0) -Indicate that the board uses normal power supply 2. highMode(1) -Indicate that the board uses high-voltage power supply
| |||||||||||||
| NhwNatOnuTable | 1.3.6.1.4.1.2011.6.3.27 | ||||||||||||
| NhwNatOnuConfigInfoTable | 1.3.6.1.4.1.2011.6.3.27.1 | ||||||||||||
| ShwNatOnuMgmtSwitch | 1.3.6.1.4.1.2011.6.3.27.1.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The status of the function of managing ONU through the NAT proxy for OLT: disable or enable. Options: 1.disable(1) - the state of the function is disabled 2.enable(2) - the state of the function is enabled
| |||||||||||||
| ShwNatOnuVlanID | 1.3.6.1.4.1.2011.6.3.27.1.2 | Integer32 (-1 | 2..4093) | RO | ||||||||||
scalar · Integer32 (-1 | 2..4093) · read-only · current The VLANID of the Management Channel which ONU belongs to. -1 (default value) indicates this value is not configured. | |||||||||||||
| ShwNatOnuIpAddr | 1.3.6.1.4.1.2011.6.3.27.1.3 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current The public IP Address of ONU under the Agent Management of OLT. | |||||||||||||
| ShwNatOnuPriority | 1.3.6.1.4.1.2011.6.3.27.1.4 | Integer32 (0..7) | RO | ||||||||||
scalar · Integer32 (0..7) · read-only · current The Priority of the SNMP Message from ONU. | |||||||||||||
| ShwNatOnuStartIp | 1.3.6.1.4.1.2011.6.3.27.1.5 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The start IP Address of ONU Inner Ip Segment. | |||||||||||||
| ShwNatOnuIpScope | 1.3.6.1.4.1.2011.6.3.27.1.6 | Integer32 (1024..5120) | RW | ||||||||||
scalar · Integer32 (1024..5120) · read-write · current The number of ONU Inner Ip. | |||||||||||||
| ThwNatOnuUDPInfoTable | 1.3.6.1.4.1.2011.6.3.27.2 | NA | |||||||||||
table · not-accessible · current The index of this table is hwFrameIndex, hwSlotIndex, hwPortIndex or hwOntIndex. The UDP port distribution table of ONU. | |||||||||||||
| RhwNatOnuUDPInfoEntry | 1.3.6.1.4.1.2011.6.3.27.2.1 | NA | |||||||||||
row · not-accessible · current The index of this entry is hwFrameIndex, hwSlotIndex, hwPortIndex or hwOntIndex. The UDP port distribution table of ONU.
| |||||||||||||
| ChwNatOnuUdpBegin | 1.3.6.1.4.1.2011.6.3.27.2.1.1 | Integer32 (0..65528) | RO | ||||||||||
column · Integer32 (0..65528) · read-only · current The start UDP Port Number of ONU which is managed by OLT through NAT. | |||||||||||||
| ThwServiceMigrationTable | 1.3.6.1.4.1.2011.6.3.28 | NA | |||||||||||
table · not-accessible · current The service migration object table of Port or ONT. The objects in hwServiceMigrationTable are used for migrating service operations associated with Port or ONT. The operations include adding and deleting a object. The indexes of this table are IfIndex, hwServiceMigrationOntId. | |||||||||||||
| RhwServiceMigrationEntry | 1.3.6.1.4.1.2011.6.3.28.1 | NA | |||||||||||
row · not-accessible · current The service migration object table of Port or ONT. The objects in hwServiceMigrationTable are used for migrating service operations associated with Port or ONT. The operations include adding and deleting a object. The indexes of this entry are IfIndex, hwServiceMigrationOntId. | |||||||||||||
| ChwServiceMigrationOntId | 1.3.6.1.4.1.2011.6.3.28.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current Ont ID. When hwOntId = 65535, the operating object is Port. When hwOntId != 65535, the operating object is ONT. | |||||||||||||
| ChwServiceMigrationRowStatus | 1.3.6.1.4.1.2011.6.3.28.1.2 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current Indicates the row status, used for creating or deleting a migration object. createAndGo(4) and destroy(6) are supported. During the query operation, active(1) is always returned for this leaf. Options: 1. active(1) -when this leaf is queried, the value is fixed to active(1). 2. createAndGo(4) -create a new instance of a conceptual row. 3. destroy(6) -delete the instances associated with an existing conceptual row. | |||||||||||||
| ThwServiceCfgMngtTable | 1.3.6.1.4.1.2011.6.3.29 | NA | |||||||||||
table · not-accessible · current The service configuration object table of Port or ONT. The objects in hwServiceCfgMngtTable are used for configuration operations associated with port or ONT. The operations include adding and deleting a object. The indexes of this table are IfIndex, hwServiceCfgOntId. | |||||||||||||
| RhwServiceCfgMngtEntry | 1.3.6.1.4.1.2011.6.3.29.1 | NA | |||||||||||
row · not-accessible · current The service configuration object table of Port or ONT. The objects in hwServiceCfgMngtTable are used for configuration operations associated with port or ONT. The operations include adding and deleting a object. The indexes of this entry are IfIndex, hwServiceCfgOntId.
| |||||||||||||
| ChwServiceCfgOntId | 1.3.6.1.4.1.2011.6.3.29.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current Ont ID. When hwOntId = 65535, the operating object is Port. When hwOntId != 65535, the operating object is ONT. | |||||||||||||
| ChwServiceCfgOperStatus | 1.3.6.1.4.1.2011.6.3.29.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The service configuration object status. Options: 1. srvCfgDeleting(1) -The operation is in deleting state. 2. srvCfgDeletionComplete(2) -The operation success. 3. srvCfgDeletionFailed(3) -The operation fail.
| |||||||||||||
| ChwServiceCfgRowStatus | 1.3.6.1.4.1.2011.6.3.29.1.3 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current Indicates the row status, used for creating or deleting a service configuration object. createAndGo(4) and destroy(6) are supported. During the query operation, active(1) is always returned for this leaf. Options: 1. active(1) -when this leaf is queried, the value is fixed to active(1). 2. createAndGo(4) -create a new instance of a conceptual row. 3. destroy(6) -delete the instances associated with an existing conceptual row. | |||||||||||||
| ThwSysCapabilityTable | 1.3.6.1.4.1.2011.6.3.30 | NA | |||||||||||
table · not-accessible · current Description of the device dynamic capability. The capability value is stored in 16 byte(128 bit), each bit denotes one capability, 1 equals support, 0 equals not. The index of this table is hwCapabilityFeatureID. | |||||||||||||
| RhwSysCapabilityEntry | 1.3.6.1.4.1.2011.6.3.30.1 | NA | |||||||||||
row · not-accessible · current Description of the device dynamic capability. The capability value is stored in 16 byte(128 bit), each bit denotes one capability, 1 equals support, 0 equals not. The index of this table is hwCapabilityFeatureID. | |||||||||||||
| ChwCapabilityFeatureID | 1.3.6.1.4.1.2011.6.3.30.1.1 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The id of device feature. Options: 1.system(1) - feature of system
| |||||||||||||
| ChwCapabilityFeatureValue | 1.3.6.1.4.1.2011.6.3.30.1.2 | OCTET STRING (SIZE (16)) | RO | ||||||||||
column · OCTET STRING (SIZE (16)) · read-only · current The vaule of device capability. When hwCapabilityFeatureID equals system(1), bit from left to right represents: 0.AG capability 1.BFD capability The value of the bit is 0 means the capability is not supported. The value of the bit is 1 means the capability is supported. | |||||||||||||
| ChwCapabilityFeatureMask | 1.3.6.1.4.1.2011.6.3.30.1.3 | OCTET STRING (SIZE (16)) | RO | ||||||||||
column · OCTET STRING (SIZE (16)) · read-only · current The mask of device capability. When hwCapabilityFeatureID equals system(1), bit from left to right represents: 0.AG capability 1.BFD capability The value of the bit is 0 means the 'capability value' is invalid. The value of the bit is 1 means the 'capability value' is valid. | |||||||||||||
| NhwDevLedLight | 1.3.6.1.4.1.2011.6.3.31 | ||||||||||||
| ShwDevLedLightByNms | 1.3.6.1.4.1.2011.6.3.31.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This node supports the SET operation: If the pre-deployment on the NMS fails, the RUN indicator turns yellow by set ledOn(1). A half an hour later, the yellow indicator automatically turns off. If the pre-deployment on the NMS is successful, the RUN indicator must be set ledOff(2). This node supports the GET operation: The system returns null(3) when the GET operation is performed. 1,ledOn(1) --Network pre-deployment fail. 2,ledOff(2) --Network pre-deployment success. 3,null(3) --The return value of GET operation.
| |||||||||||||
| NhwBandwidth | 1.3.6.1.4.1.2011.6.3.32 | ||||||||||||
| ShwBandwidthMode | 1.3.6.1.4.1.2011.6.3.32.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Configuring the bandwidth mode of the device. Options: 1.bandwidth40G(1) - 40G 2.bandwidth80G(2) - 80G 3.bandwidth160G(3) - 160G 4.bandwidth50G(4) - 50G 5.bandwidth100G(5) - 100G 6.bandwidth200G(6) - 200G
| |||||||||||||
| ThwOntRemoteHttpChnlCfgTable | 1.3.6.1.4.1.2011.6.3.34 | NA | |||||||||||
table · not-accessible · current This table describes parameters that need to be delivered to the OLT and ONT during remote access to the ONT through the web page. | |||||||||||||
| RhwOntRemoteHttpChnlCfgEntry | 1.3.6.1.4.1.2011.6.3.34.1 | NA | |||||||||||
row · not-accessible · current The index of this entry is hwFrameIndex,hwSlotIndex,hwPortIndex,hwOntIndex.
| |||||||||||||
| ChwOntRemoteHttpChnlVlan | 1.3.6.1.4.1.2011.6.3.34.1.1 | Integer32 (1..4094) | RC | ||||||||||
column · Integer32 (1..4094) · read-create · current Indicates the VLAN ID of the ONT. If this parameter is not specified, the system automatically obtains an unoccupied VLAN ID and uses it as the default VLAN ID. | |||||||||||||
| ChwOntRemoteHttpChnlIpAddress | 1.3.6.1.4.1.2011.6.3.34.1.2 | IpAddress | RC | ||||||||||
column · IpAddress · read-create · current Indicates the IP address of the ONT. If this parameter is not specified, the system selects an unoccupied IP address and uses it as the default IP address. | |||||||||||||
| ChwOntRemoteHttpChnlHttpPort | 1.3.6.1.4.1.2011.6.3.34.1.3 | Integer32 (0..65528) | RC | ||||||||||
column · Integer32 (0..65528) · read-create · current Indicates the web server port of the ONT. If this parameter is not specified, port 7017 is used by default. | |||||||||||||
| ChwOntRemoteHttpChnlProtocol | 1.3.6.1.4.1.2011.6.3.34.1.4 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Indicates the protocol type of the web server of the ONT. If this parameter is not specified, HTTPS protocol is used by default.
| |||||||||||||
| ChwOntRemoteHttpChnlUserName | 1.3.6.1.4.1.2011.6.3.34.1.5 | OCTET STRING (SIZE (1..32)) | RC | ||||||||||
column · OCTET STRING (SIZE (1..32)) · read-create · current Indicates the user name used for a temporary user to log in to the web server of the ONT. If this parameter is not specified, the existing user name and password are used for login. | |||||||||||||
| ChwOntRemoteHttpChnlPassword | 1.3.6.1.4.1.2011.6.3.34.1.6 | OCTET STRING (SIZE (6..32)) | RC | ||||||||||
column · OCTET STRING (SIZE (6..32)) · read-create · current Indicates the password used for a temporary user to log in to the web server of the ONT, which can consist of numbers, uppercase letters, lowercase letters, and special characters. | |||||||||||||
| ChwOntRemoteHttpProxyPort | 1.3.6.1.4.1.2011.6.3.34.1.7 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Indicates the port ID of the TCP proxy during remote access to the ONT from the OLT through the web page, which is port 8024 fixedly. | |||||||||||||
| ChwOntRemoteHttpChnlDuration | 1.3.6.1.4.1.2011.6.3.34.1.8 | Integer32 (1..120) | RC | ||||||||||
column · Integer32 (1..120) · read-create · current Indicates the ONT login duration of a temporary user (unit: minute). If this parameter is not specified, the login duration is 30 minutes by default. | |||||||||||||
| ChwOntRemoteHttpProxyStatus | 1.3.6.1.4.1.2011.6.3.34.1.9 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Indicates the enabling status of the TCP proxy. The initial state is disable.
| |||||||||||||
| ChwOntRemoteHttpChnlRowStatus | 1.3.6.1.4.1.2011.6.3.34.1.10 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current Indicates the row status, used for creating or deleting a service configuration object. createAndGo(4) and destroy(6) are supported. During the query operation, active(1) is always returned for this leaf. Options: 2. createAndGo(4) -create a new instance of a conceptual row. 3. destroy(6) -delete the instances associated with an existing conceptual row. | |||||||||||||
| ThwDevicePktStatTable | 1.3.6.1.4.1.2011.6.3.35 | NA | |||||||||||
table · not-accessible · current This table is used to query statistics collected on some packets of a device. | |||||||||||||
| RhwDevicePktStatEntry | 1.3.6.1.4.1.2011.6.3.35.1 | NA | |||||||||||
row · not-accessible · current The indexes of this entry are hwFrameIndex and hwSlotIndex.
| |||||||||||||
| ChwDevicePktStatReset | 1.3.6.1.4.1.2011.6.3.35.1.1 | Integer32 (0..255) | RC | ||||||||||
column · Integer32 (0..255) · read-create · current The object specifies the type of statistics to be cleared. Currently, only the following types are supported: 1. vlanMismatch(1) - Reset the statistics of packets discarded due to VLAN tag mismatch. 2. l3EthTypeErr(2) - Reset the statistics of packets discarded by layer 3 interfaces due to EthType error. | |||||||||||||
| ChwDevicePktStatVlanMismatch | 1.3.6.1.4.1.2011.6.3.35.1.2 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of packets whose VLAN tag does not match the interface configuration. | |||||||||||||
| ChwDevicePktStatL3EthTypeErr | 1.3.6.1.4.1.2011.6.3.35.1.3 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of packets discarded by layer 3 interfaces due to EthType error. | |||||||||||||
| NhwDevConformance | 1.3.6.1.4.1.2011.6.3.101 | ||||||||||||
| NhwDevCompliances | 1.3.6.1.4.1.2011.6.3.101.1 | ||||||||||||
| MhwDevCompliance | 1.3.6.1.4.1.2011.6.3.101.1.1 | ||||||||||||
compliance · current The compliance statement for SNMP entities which implement HUAWEI DEVICE MIB. | |||||||||||||
| NhwDevGroups | 1.3.6.1.4.1.2011.6.3.101.2 | ||||||||||||
| GhwSystemParaGroup | 1.3.6.1.4.1.2011.6.3.101.2.1 | ||||||||||||
| GhwFrameLinksGroup | 1.3.6.1.4.1.2011.6.3.101.2.2 | ||||||||||||
| GhwDevTrapVbOidsGroup | 1.3.6.1.4.1.2011.6.3.101.2.3 | ||||||||||||
group · current hwDevTrapVbOids. | |||||||||||||
| GhwDevCompatibleTableGroup | 1.3.6.1.4.1.2011.6.3.101.2.4 | ||||||||||||
group · current hwDevCompatibleTable. | |||||||||||||
| GhwDevCpuGroup | 1.3.6.1.4.1.2011.6.3.101.2.5 | ||||||||||||
| GhwDevMemGroup | 1.3.6.1.4.1.2011.6.3.101.2.6 | ||||||||||||
group · current hwDevMemGroup. | |||||||||||||
| GhwDevBufGroup | 1.3.6.1.4.1.2011.6.3.101.2.7 | ||||||||||||
| GhwDevGeneralTrapsGroup | 1.3.6.1.4.1.2011.6.3.101.2.8 | ||||||||||||
group · current hwDevGeneralTraps. | |||||||||||||
| GhwDevPacketStatisticsGroup | 1.3.6.1.4.1.2011.6.3.101.2.9 | ||||||||||||
group · current hwDevPacketStatisticsGroup. | |||||||||||||
| NhwDevSnmpProbeMonitor | 1.3.6.1.4.1.2011.6.3.103 | ||||||||||||
| NhwDevSnmpProbeMonitorPara | 1.3.6.1.4.1.2011.6.3.103.1 | ||||||||||||
| ShwDevSnmpProbeMonitorSwitch | 1.3.6.1.4.1.2011.6.3.103.1.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The object specifies the switch state of SNMP probe monitor. Options: enable(1) -indicates the SNMP probe monitor switch is on. disable(2) -indicates the SNMP probe monitor switch is off. Default: enable(1).
| |||||||||||||
| ShwDevSnmpProbeMonitorActiveThreshold | 1.3.6.1.4.1.2011.6.3.103.1.2 | Integer32 (3..60) | RW | ||||||||||
scalar · Integer32 (3..60) · read-write · current The object specifies the active-threshold of SNMP probe monitor. From 3 minutes to 60 minutes. Default: 15 minutes. | |||||||||||||
| ThwDevSnmpProbeHostTable | 1.3.6.1.4.1.2011.6.3.103.2 | NA | |||||||||||
table · not-accessible · current The SNMP probe monitor table, which supports the functions of querying the information of SNMP probe monitor. The index of this table is hwDevSnmpProbeHostIndex. | |||||||||||||
| RhwDevSnmpProbeHostEntry | 1.3.6.1.4.1.2011.6.3.103.2.1 | NA | |||||||||||
row · not-accessible · current The SNMP probe monitor table, which supports the functions of querying the information of SNMP probe monitor. The index of this table is hwDevSnmpProbeHostIndex. | |||||||||||||
| ChwDevSnmpProbeHostIndex | 1.3.6.1.4.1.2011.6.3.103.2.1.1 | Integer32 (0..4) | RO | ||||||||||
column · Integer32 (0..4) · read-only · current The object specifies the index of SNMP probe monitor. | |||||||||||||
| ChwDevSnmpProbeHostIpAddressType | 1.3.6.1.4.1.2011.6.3.103.2.1.2 | InetAddressType | RO | ||||||||||
column · InetAddressType · read-only · current The object specifies the IP address type of SNMP probe monitor: Options: ipv4(1) -indicates an IPv4 address ipv6(2) -indicates an IPv6 address | |||||||||||||
| ChwDevSnmpProbeHostIpAddress | 1.3.6.1.4.1.2011.6.3.103.2.1.3 | InetAddress | RO | ||||||||||
column · InetAddress · read-only · current The object specifies the IP address of SNMP probe monitor. | |||||||||||||
| ChwDevSnmpProbeReceivedCount | 1.3.6.1.4.1.2011.6.3.103.2.1.4 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The object specifies the total probe count of SNMP probe monitor. | |||||||||||||
| ChwDevSnmpProbeInitiallyReceivedTime | 1.3.6.1.4.1.2011.6.3.103.2.1.5 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current The object specifies the initial probe time of SNMP probe monitor. | |||||||||||||
| ChwDevSnmpProbeRecentlyReceivedTime | 1.3.6.1.4.1.2011.6.3.103.2.1.6 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current The object specifies the recent probe time of SNMP probe monitor. | |||||||||||||
| ChwDevSnmpProbeMinimumInterval | 1.3.6.1.4.1.2011.6.3.103.2.1.7 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The object specifies the minimum interval of SNMP probe monitor, unit second. | |||||||||||||
| ChwDevSnmpProbeMaxmumInterval | 1.3.6.1.4.1.2011.6.3.103.2.1.8 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The object specifies the maxmum interval of SNMP probe monitor, unit second. | |||||||||||||
| ChwDevSnmpProbeAverageInterval | 1.3.6.1.4.1.2011.6.3.103.2.1.9 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The object specifies the average interval of SNMP probe monitor, unit second. | |||||||||||||
| ThwDevSnmpProbeRecordTable | 1.3.6.1.4.1.2011.6.3.103.3 | NA | |||||||||||
table · not-accessible · current The abnormal record table of SNMP probe monitor, which supports the functions of querying the abnormal record of SNMP probe monitor. The index of this table is hwDevSnmpProbeRecordIndex. | |||||||||||||
| RhwDevSnmpProbeRecordEntry | 1.3.6.1.4.1.2011.6.3.103.3.1 | NA | |||||||||||
row · not-accessible · current The abnormal record table of SNMP probe monitor, which supports the functions of querying the abnormal record of SNMP probe monitor. The index of this table is hwDevSnmpProbeRecordIndex. | |||||||||||||
| ChwDevSnmpProbeRecordIndex | 1.3.6.1.4.1.2011.6.3.103.3.1.1 | Integer32 (0..49) | RO | ||||||||||
column · Integer32 (0..49) · read-only · current The object specifies the index of abnormal record. | |||||||||||||
| ChwDevSnmpProbeRecordHostIpAddressType | 1.3.6.1.4.1.2011.6.3.103.3.1.2 | InetAddressType | RO | ||||||||||
column · InetAddressType · read-only · current The object specifies the IP address type of abnormal record: Options: ipv4(1) -indicates an IPv4 address ipv6(2) -indicates an IPv6 address | |||||||||||||
| ChwDevSnmpProbeRecordHostIpAddress | 1.3.6.1.4.1.2011.6.3.103.3.1.3 | InetAddress | RO | ||||||||||
column · InetAddress · read-only · current The object specifies the IP address of abnormal record. | |||||||||||||
| ChwDevSnmpProbeRecordLastReceivedTime | 1.3.6.1.4.1.2011.6.3.103.3.1.4 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current The object specifies the last probe time of abnormal record. | |||||||||||||
| ChwDevSnmpProbeRecordReceivedCount | 1.3.6.1.4.1.2011.6.3.103.3.1.5 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The object specifies the total probe count of abnormal record. | |||||||||||||
| ChwDevSnmpProbeRecordMinimumInterval | 1.3.6.1.4.1.2011.6.3.103.3.1.6 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The object specifies the minimum interval of abnormal record, unit second. | |||||||||||||
| ChwDevSnmpProbeRecordMaxmumInterval | 1.3.6.1.4.1.2011.6.3.103.3.1.7 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The object specifies the maxmum interval of abnormal record, unit second. | |||||||||||||
| ChwDevSnmpProbeRecordAverageInterval | 1.3.6.1.4.1.2011.6.3.103.3.1.8 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The object specifies the average interval of the abnormal record, unit second. | |||||||||||||
| ThwDevSnmpProbeNmsDiscTable | 1.3.6.1.4.1.2011.6.3.103.4 | NA | |||||||||||
table · not-accessible · current The NMS disconnecting monitoring table which supports the function of checking if the NMS is disconnected to the device. The index of this table is hwDevSnmpProbeNmsSeq and hwDevSnmpProbeNmsTime. | |||||||||||||
| RhwDevSnmpProbeNmsDiscEntry | 1.3.6.1.4.1.2011.6.3.103.4.1 | NA | |||||||||||
row · not-accessible · current The NMS disconnecting monitoring table which supports the function of checking if the NMS is disconnected to the device. The index of this table is hwDevSnmpProbeNmsSeq and hwDevSnmpProbeNmsTime. | |||||||||||||
| ChwDevSnmpProbeNmsSeq | 1.3.6.1.4.1.2011.6.3.103.4.1.1 | Unsigned32 (0..4294967295) | RO | ||||||||||
column · Unsigned32 (0..4294967295) · read-only · current The object specifies the index of NMS disconnecting monitoring table. Device determines whether NMS is disconnected to device based on whether the received sequence number are consecutive. The sequence number starts from 1 and 0 is invalid value. Actively disconnects from the device when the sequence number is 0. | |||||||||||||
| ChwDevSnmpProbeNmsTime | 1.3.6.1.4.1.2011.6.3.103.4.1.2 | OCTET STRING (SIZE (0..19)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..19)) · read-only · current The object specifies the index of NMS disconnecting monitoring table. The object specifies the time when the set or get operation is performed on this table node on the NMS. | |||||||||||||
| ChwDevSnmpProbeNmsDiscMaxInterval | 1.3.6.1.4.1.2011.6.3.103.4.1.3 | Unsigned32 (10..3600) | RO | ||||||||||
column · Unsigned32 (10..3600) · read-only · current The object specifies the max interval that device connects to NMS. If the NMS fails to connect to the device within the max interval, the NMS is disconnected to the device. The value ranges from 10 to 3600. The unit of MaxInterval time is second. | |||||||||||||
| ThwDevSnmpProbeNmsDiscRecordTable | 1.3.6.1.4.1.2011.6.3.103.5 | NA | |||||||||||
table · not-accessible · current The NMS disconnecting monitoring record table which supports the function of querying the record of disconnected reason. The index of this table is hwDevSnmpProbeNmsDiscRecordIndex, hwDevSnmpProbeNmsDiscMainType and hwDevSnmpProbeNmsDiscSubType. | |||||||||||||
| RhwDevSnmpProbeNmsDiscRecordEntry | 1.3.6.1.4.1.2011.6.3.103.5.1 | NA | |||||||||||
row · not-accessible · current The abnormal record table of SNMP probe monitor, which supports the functions of querying the disconnected reason of SNMP probe monitor. The index of this table is hwDevSnmpProbeNmsDiscRecordIndex, hwDevSnmpProbeNmsDiscMainType, hwDevSnmpProbeNmsDiscSubType. | |||||||||||||
| ChwDevSnmpProbeNmsDiscRecordIndex | 1.3.6.1.4.1.2011.6.3.103.5.1.1 | Unsigned32 (0..49) | RO | ||||||||||
column · Unsigned32 (0..49) · read-only · current The object specifies the index of disconnection record. | |||||||||||||
| ChwDevSnmpProbeNmsDiscMainType | 1.3.6.1.4.1.2011.6.3.103.5.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The object specifies the main type of disconnection. Options: 1. environment(1) - indicates that the main type is environment of equipment. 2. network(2) - indicates that the main type is network of equipment. 3. hardware(3) - indicates that the main type is hardware of equipment. 4. software(4) - indicates that the main type is software of equipment.
| |||||||||||||
| ChwDevSnmpProbeNmsDiscSubType | 1.3.6.1.4.1.2011.6.3.103.5.1.3 | Unsigned32 (1..4294967295) | RO | ||||||||||
column · Unsigned32 (1..4294967295) · read-only · current The object specifies the sub type of disconnection. One main type corresponds to multiple sub types.
The mapping between main type and sub type is as follows:
-----------------------------------------------
Main Type | Sub Type
-----------------------------------------------
environment(1)| device reboot(1)
-----------------------------------------------
| uplink port(34)
network(2) ------------------------------
| management network(35)
-----------------------------------------------
| optical module(36)
------------------------------
hardware(3) | uplink board(37)
------------------------------
| main board(38)
-----------------------------------------------
| snmp packet(40)
software(4) ------------------------------
| LACP status(41)
----------------------------------------------- | |||||||||||||
| ChwDevSnmpProbeNmsConnectTime | 1.3.6.1.4.1.2011.6.3.103.5.1.4 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current The object specifies the time of connection. | |||||||||||||
| ChwDevSnmpProbeNmsDisconnectTime | 1.3.6.1.4.1.2011.6.3.103.5.1.5 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current The object specifies the time of disconnection. | |||||||||||||
| ChwDevSnmpProbeNmsReconnectTime | 1.3.6.1.4.1.2011.6.3.103.5.1.6 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current The object specifies the time of reconnection. | |||||||||||||
| ChwDevSnmpDisconnectType | 1.3.6.1.4.1.2011.6.3.103.5.1.7 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The object specifies the type of disconnection. Options: 1. timeout(0) - indicates that the disconnection type is handshake timed out. 2. repeat(1) - indicates that the disconnection type is repeated handshake. 3. reboot(2) - indicates that the disconnection type is device reboot.
| |||||||||||||
| ChwDevSnmpProbeNmsDiscCheckResult | 1.3.6.1.4.1.2011.6.3.103.5.1.8 | Unsigned32 (0..4294967295) | RO | ||||||||||
column · Unsigned32 (0..4294967295) · read-only · current The object specifies the check result of main type and sub type. Options: 1. 0 - indicates that the check result is normal. 2. 4294967295 - indicates that the check result is uncompleted. 3. other(1..4294967294) - indicates that the check result is unknown. | |||||||||||||
| NhwDevAntiTheft | 1.3.6.1.4.1.2011.6.3.104 | ||||||||||||
| NhwDevAntiTheftTable | 1.3.6.1.4.1.2011.6.3.104.1 | ||||||||||||
| ShwDevAntiTheftSwitch | 1.3.6.1.4.1.2011.6.3.104.1.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The object specifies the anti-theft switch state for the system. Default: disable. Options: 1. disable(1) - indicates that the switch is off. 2. enable(2) - indicates that the switch is on.
| |||||||||||||
| ShwDevAntiTheftAuthorityStatus | 1.3.6.1.4.1.2011.6.3.104.1.2 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The object specifies the authority state for the system. Default: init. Options: 1. init(1) - indicates that the system is in the initial state. 2. authorized(2) - indicates that the system is authorized successfully. 3. unauthorized(3) - indicates that the system is not authorized and the system config is locked. 4. tempAuthorized(4) - indicates that the system is temporarily authorized successfully. Please pay attention to the remaining authorization time. 5. locked(5) - indicates that the system has been unauthorized for a long time and some businesses are restricted.
| |||||||||||||
| ShwDevAntiTheftOperatorName | 1.3.6.1.4.1.2011.6.3.104.1.3 | OCTET STRING (SIZE (0..100)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (0..100)) · read-write · current The object specifies the operator name. | |||||||||||||
| ShwDevAntiTheftPublicKey | 1.3.6.1.4.1.2011.6.3.104.1.4 | OCTET STRING (SIZE (0..1024)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (0..1024)) · read-write · current The object specifies the RSA public key in PEM format. The public key and fingerprint must be set in pair. | |||||||||||||
| ShwDevAntiTheftPublicKeyFingerprint | 1.3.6.1.4.1.2011.6.3.104.1.5 | OCTET STRING (SIZE (0..64)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (0..64)) · read-write · current The object specifies the public key fingerprint. The public key and fingerprint must be set in pair. | |||||||||||||
| ShwDevAntiTheftStrategy | 1.3.6.1.4.1.2011.6.3.104.1.6 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The object specifies the anti-theft strategy for the system. Default: service. Options: 1. service(1) - indicates that the strategy is locking the configuration and restricting some businesses.
| |||||||||||||
| ShwDevAntiTheftGraceTime | 1.3.6.1.4.1.2011.6.3.104.1.7 | Unsigned32 (0..100) | RW | ||||||||||
scalar · Unsigned32 (0..100) · read-write · current The object specifies the anti-theft grace time for the system. Default: 7. Unit: day.
| |||||||||||||
| ShwDevAntiTheftGraceTimeRemaining | 1.3.6.1.4.1.2011.6.3.104.1.8 | TimeTicks | RO | ||||||||||
scalar · TimeTicks · read-only · current The object specifies the anti-theft remaining grace time for the system. When the grace time is up, the unauthorized system will be locked. Default: 0. | |||||||||||||
| ShwDevAntiTheftTemporarilyUnlockedTimeRemaining | 1.3.6.1.4.1.2011.6.3.104.1.9 | TimeTicks | RO | ||||||||||
scalar · TimeTicks · read-only · current The object specifies the remaining temporary authorization time for the system. Default: 0. | |||||||||||||
| ShwDevAntiTheftRandomValue | 1.3.6.1.4.1.2011.6.3.104.1.10 | OCTET STRING (SIZE (0..32)) | RO | ||||||||||
scalar · OCTET STRING (SIZE (0..32)) · read-only · current The object specifies the random value for the system. The random value will be retained for three minutes. | |||||||||||||
| ShwDevAntiTheftSignature | 1.3.6.1.4.1.2011.6.3.104.1.11 | OCTET STRING (SIZE (0..1024)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (0..1024)) · read-write · current The object specifies the signature of the random value. The signature is used to authorize the system. | |||||||||||||
| ShwDevAntiTheftAdminStatus | 1.3.6.1.4.1.2011.6.3.104.1.12 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The object specifies the admin status of system anti-theft.
Default: nooperation.
Options:
1. nooperation(-1) - Default state of the anti-theft admin status.
2. enable(1) - Enable the system anti-theft function. It needs to be set with hwDevAntiTheftOperatorName, hwDevAntiTheftPublicKey,
hwDevAntiTheftPublicKeyFingerprint, hwDevAntiTheftStrategy(optional) and hwDevAntiTheftGraceTime(optional).
3. disable(2) - Disable the system anti-theft function. It needs to be set with hwDevAntiTheftSignature.
4. authorize(3) - Authorize the system. It needs to be set with hwDevAntiTheftSignature.
5. revoke(4) - Unauthorize the system, the system will revert to unauthorized state. It needs to be set with hwDevAntiTheftSignature.
6. update(5) - Update the configuration of anti-theft. It needs to be set with hwDevAntiTheftSignature and the objects to be updated.
The hwDevAntiTheftPublicKey and hwDevAntiTheftPublicKeyFingerprint must be updated in pairs.
7. lock(6) - Lock the system immediately. It needs to revoke the system to unauthorized first.
| |||||||||||||
| ThwDevAntiTheftSlotTable | 1.3.6.1.4.1.2011.6.3.104.2 | NA | |||||||||||
table · not-accessible · current The anti-theft slot table, which can be used to query the anti-theft infomation for the board. The index of this table is hwFrameIndex and hwSlotIndex. For example, 0.2 indicates that the board is in slot 2, shelf 0. | |||||||||||||
| RhwDevAntiTheftSlotEntry | 1.3.6.1.4.1.2011.6.3.104.2.1 | NA | |||||||||||
row · not-accessible · current The anti-theft slot table, which can be used to query the anti-theft infomation for the board. The index of this table is hwFrameIndex and hwSlotIndex. For example, 0.2 indicates that the board is in slot 2, shelf 0.
| |||||||||||||
| ChwDevAntiTheftSlotSwitch | 1.3.6.1.4.1.2011.6.3.104.2.1.1 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The object specifies the anti-theft switch state for the board. Default: disable. Options: 1. disable(1) - indicates that the switch is off. 2. enable(2) - indicates that the switch is on.
| |||||||||||||
| ChwDevAntiTheftSlotAuthorityStatus | 1.3.6.1.4.1.2011.6.3.104.2.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The object specifies the authority state for the board.
Default: init.
Options:
1. init(1) - indicates that the board is in the initial state.
2. authorized(2) - indicates that the board is authorized successfully.
3. unauthorized(3) - indicates that the board is not authorized and the system config is locked.
4. tempAuthorized(4) - indicates that the board is temporarily authorized successfully.
Please pay attention to the remaining authorization time.
5. locked(5) - indicates that the board has been unauthorized for a long time and some businesses are restricted.
| |||||||||||||
| ChwDevAntiTheftSlotOperatorName | 1.3.6.1.4.1.2011.6.3.104.2.1.3 | OCTET STRING (SIZE (0..100)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..100)) · read-only · current The object specifies the operator name. | |||||||||||||
| ChwDevAntiTheftSlotPublicKey | 1.3.6.1.4.1.2011.6.3.104.2.1.4 | OCTET STRING (SIZE (0..1024)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..1024)) · read-only · current The object specifies the RSA public key in PEM format. | |||||||||||||
| ChwDevAntiTheftSlotPublicKeyFingerprint | 1.3.6.1.4.1.2011.6.3.104.2.1.5 | OCTET STRING (SIZE (0..64)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..64)) · read-only · current The object specifies the public key fingerprint. | |||||||||||||
| ChwDevAntiTheftSlotStrategy | 1.3.6.1.4.1.2011.6.3.104.2.1.6 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The object specifies the anti-theft strategy for the board. Default: service. Options: 1. service(1) - indicates that the strategy is locking the configuration and restricting some businesses.
| |||||||||||||
| ChwDevAntiTheftSlotGraceTime | 1.3.6.1.4.1.2011.6.3.104.2.1.7 | Unsigned32 (0..100) | RO | ||||||||||
column · Unsigned32 (0..100) · read-only · current The object specifies the anti-theft grace time for the board. Default: 7. Unit: day.
| |||||||||||||
| ChwDevAntiTheftSlotGraceTimeRemaining | 1.3.6.1.4.1.2011.6.3.104.2.1.8 | TimeTicks | RO | ||||||||||
column · TimeTicks · read-only · current The object specifies the anti-theft remaining grace time for the board. When the grace time is up, the unauthorized board will be locked. Default: 0. | |||||||||||||
| ThwWarrantyInfoTable | 1.3.6.1.4.1.2011.6.3.105 | NA | |||||||||||
table · not-accessible · current This table contains one row per physical warranty information. There is always at least one row for an 'overall' physical warranty information. | |||||||||||||
| RhwWarrantyInfoEntry | 1.3.6.1.4.1.2011.6.3.105.1 | NA | |||||||||||
row · not-accessible · current Information about a particular physical warranty information. | |||||||||||||
| ChwWarrantyInfoSubPhysicalIndex | 1.3.6.1.4.1.2011.6.3.105.1.1 | Integer32 (0..2147483647) | NA | ||||||||||
column · Integer32 (0..2147483647) · not-accessible · current The object specifies the sub-index of warranty information. Default: 0. | |||||||||||||
| ChwWarrantyInfoSupport | 1.3.6.1.4.1.2011.6.3.105.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Whether the current object supports for warranty information. Options: 1. support(1) - indicates that the object is support 2. notsupport(2) - indicates that the object is not support
| |||||||||||||
| ChwWarrantyInfoSerialNum | 1.3.6.1.4.1.2011.6.3.105.1.3 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current The object specifies the serial number in warranty information. | |||||||||||||
| ChwWarrantyInfoStartPointDate | 1.3.6.1.4.1.2011.6.3.105.1.4 | DateAndTime | RW | ||||||||||
column · DateAndTime · read-write · current The object specifies the start point date in warranty information. | |||||||||||||
| ChwWarrantyInfoServiceSession | 1.3.6.1.4.1.2011.6.3.105.1.5 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The object specifies the service session in warranty information. | |||||||||||||
| ChwWarrantyInfoFirstActivationDate | 1.3.6.1.4.1.2011.6.3.105.1.6 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current The object specifies the first activation date in warranty information. | |||||||||||||
| ChwWarrantyInfoMfgDate | 1.3.6.1.4.1.2011.6.3.105.1.7 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current The object specifies the manufacture date in warranty information. | |||||||||||||
| ThwFrameVersionMatchInfoTable | 1.3.6.1.4.1.2011.6.3.107 | NA | |||||||||||
table · not-accessible · current This table contains packet version information. | |||||||||||||
| RhwFrameVersionMatchInfoEntry | 1.3.6.1.4.1.2011.6.3.107.1 | NA | |||||||||||
| ChwFrameVersionFrameId | 1.3.6.1.4.1.2011.6.3.107.1.1 | Integer32 (0..15) | RO | ||||||||||
column · Integer32 (0..15) · read-only · current The index of a shelf in the device. | |||||||||||||
| ChwFrameVersionProductName | 1.3.6.1.4.1.2011.6.3.107.1.2 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current The name of a shelf in the device. | |||||||||||||
| ChwFrameCurrentVersion | 1.3.6.1.4.1.2011.6.3.107.1.3 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current The current packet version of a shelf in the device. | |||||||||||||
| ChwFrameMatchVersion | 1.3.6.1.4.1.2011.6.3.107.1.4 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current The match packet version of a shelf in the device. | |||||||||||||
Traps / Notifications
- hwDevActiveStandbyContolBoardInconsistentTrap
1.3.6.1.4.1.2011.6.3.8.3.1.0.3 - hwDevActiveStandbyDataSynCancelRecoverTrap
1.3.6.1.4.1.2011.6.3.8.3.1.0.6 - hwDevActiveStandbyDataSynCancelTrap
1.3.6.1.4.1.2011.6.3.8.3.1.0.5 - hwDevAntiTheftLockTraps
1.3.6.1.4.1.2011.6.3.8.6.0.1 - hwDevAntiTheftUnAuthResumeTraps
1.3.6.1.4.1.2011.6.3.8.6.0.3 - hwDevAntiTheftUnAuthTraps
1.3.6.1.4.1.2011.6.3.8.6.0.2 - hwDevBoardAddConfigReplaceFailTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.52 - hwDevBoardAddConfigReplaceSuccessTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.51 - hwDevBoardAutoLoadTrap
1.3.6.1.4.1.2011.6.3.8.2.0.5 - hwDevBoardAutomaticExpandFailTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.23 - hwDevBoardAutomaticExpandRestoreTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.24 - hwDevBoardDetectTrap
1.3.6.1.4.1.2011.6.3.8.2.0.1 - hwDevBoardDisappearedTrap
1.3.6.1.4.1.2011.6.3.8.2.0.2 - hwDevBoardEnterTemperatureProctectModeTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.6 - hwDevBoardExitTemperatureProctectModeTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.7 - hwDevBoardFaultTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.3 - hwDevBoardInputFaultTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.26 - hwDevBoardInputRecoverTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.27 - hwDevBoardIsolatedRecoverTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.45 - hwDevBoardIsolatedTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.44 - hwDevBoardMisMatchTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.1 - hwDevBoardOnlineStateTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.14 - hwDevBoardPower5VFaultTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.16 - hwDevBoardPower5VResumeTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.17 - hwDevBoardReplaceFailTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.30 - hwDevBoardReplacedTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.5 - hwDevBoardRestoreTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.4 - hwDevBoardStaChgOffLineTrap
1.3.6.1.4.1.2011.6.3.8.2.0.4 - hwDevBoardStateChangedTrap
1.3.6.1.4.1.2011.6.3.8.2.0.3 - hwDevBoardTemperatureTooHighRecoverTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.9 - hwDevBoardTemperatureTooHighTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.8 - hwDevBoardTemperatureTooLowRecoverTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.11 - hwDevBoardTemperatureTooLowTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.10 - hwDevExBiosPasswordFaultTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.39 - hwDevExBiosPasswordRecoverTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.40 - hwDevExtendedFrameDyingGaspAlarmTrap
1.3.6.1.4.1.2011.6.3.8.3.2.0.5 - hwDevExtendedFrameDyingGaspRestoreTrap
1.3.6.1.4.1.2011.6.3.8.3.2.0.6 - hwDevExtendedFrameFaultTrap
1.3.6.1.4.1.2011.6.3.8.3.2.0.29 - hwDevExtendedFramePortChangeTrap
1.3.6.1.4.1.2011.6.3.8.2.0.11 - hwDevExtendedFrameRestoreTrap
1.3.6.1.4.1.2011.6.3.8.3.2.0.28 - hwDevExtendedFrameTypeInconsistentTrap
1.3.6.1.4.1.2011.6.3.8.3.2.0.4 - hwDevFileIntegrityCheckFailedTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.49 - hwDevFileIntegrityCheckSuccessTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.50 - hwDevFrameCmtsAntitheftAuthFailTrap
1.3.6.1.4.1.2011.6.3.8.3.2.0.8 - hwDevFrameCmtsAntitheftAuthRestoreTrap
1.3.6.1.4.1.2011.6.3.8.3.2.0.9 - hwDevFrameDetectTrap
1.3.6.1.4.1.2011.6.3.8.2.0.8 - hwDevFrameDisappearedTrap
1.3.6.1.4.1.2011.6.3.8.2.0.9 - hwDevFrameFaultTrap
1.3.6.1.4.1.2011.6.3.8.3.2.0.3 - hwDevFrameIdOverLoadTrap
1.3.6.1.4.1.2011.6.3.8.3.2.0.7 - hwDevFrameRestoreTrap
1.3.6.1.4.1.2011.6.3.8.3.2.0.2 - hwDevFrameStateChangeTrap
1.3.6.1.4.1.2011.6.3.8.2.0.10 - hwDevFrameTypeInconsistentTrap
1.3.6.1.4.1.2011.6.3.8.3.2.0.1 - hwDevImportantFileBrokenRestoreTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.36 - hwDevImportantFileBrokenTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.35 - hwDevLoadLowerVersionTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.41 - hwDevPowerInputFaultTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.12 - hwDevPowerInputRecoverTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.13 - hwDevPowerLackVolitageRecoverTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.29 - hwDevPowerLackVoltageFaultTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.28 - hwDevPowerOverThresholdFaultTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.42 - hwDevPowerOverThresholdRestoreTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.43 - hwDevPowerPortInputFaultTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.31 - hwDevPowerPortInputRecoverTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.32 - hwDevPowerPortInputUnderVolFaultTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.33 - hwDevPowerPortInputUnderVolRecoverTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.34 - hwDevRtuLicCapacityExceedFaultTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.37 - hwDevRtuLicCapacityExceedRestoreTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.38 - hwDevSnmpProbeRecordTrap
1.3.6.1.4.1.2011.6.3.8.2.0.12 - hwDevStackFrameFaultTrap
1.3.6.1.4.1.2011.6.3.8.3.2.0.20 - hwDevStackFrameRestoreTrap
1.3.6.1.4.1.2011.6.3.8.3.2.0.21 - hwDevStackFrameStateChangeTrap
1.3.6.1.4.1.2011.6.3.8.2.0.13 - hwDevStandbyFrameTypeInconsistentTrap
1.3.6.1.4.1.2011.6.3.8.3.2.0.22 - hwDevStorageFaultRestoreTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.21 - hwDevStorageFaultTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.18 - hwDevSubBoardActStdInconsistentRestoreTrap
1.3.6.1.4.1.2011.6.3.8.3.4.0.9 - hwDevSubBoardActStdInconsistentTrap
1.3.6.1.4.1.2011.6.3.8.3.4.0.8 - hwDevSubBoardFaultRecoverTrap
1.3.6.1.4.1.2011.6.3.8.3.4.0.7 - hwDevSubBoardFaultTrap
1.3.6.1.4.1.2011.6.3.8.3.4.0.6 - hwDevSubBoardMisMatchTrap
1.3.6.1.4.1.2011.6.3.8.3.4.0.2 - hwDevSubBoardReplacedTrap
1.3.6.1.4.1.2011.6.3.8.3.4.0.3 - hwDevSubBoardTemperatureTooHighRecoverTrap
1.3.6.1.4.1.2011.6.3.8.3.4.0.5 - hwDevSubBoardTemperatureTooHighTrap
1.3.6.1.4.1.2011.6.3.8.3.4.0.4 - hwDevSubBoardTypeInconsistentTrap
1.3.6.1.4.1.2011.6.3.8.3.4.0.1 - hwDevSystemAutoDeployFailTrap
1.3.6.1.4.1.2011.6.3.8.3.1.0.8 - hwDevSystemDataSynCancelTrap
1.3.6.1.4.1.2011.6.3.8.3.1.0.2 - hwDevSystemDeviceNameChangeTrap
1.3.6.1.4.1.2011.6.3.8.3.1.0.9 - hwDevSystemPoweroffTrap
1.3.6.1.4.1.2011.6.3.8.3.1.0.7 - hwDevSystemStateChangeTrap
1.3.6.1.4.1.2011.6.3.8.2.0.7 - hwDevTlsCertifyFailTrap
1.3.6.1.4.1.2011.6.3.8.3.2.0.26 - hwDevTlsCertifyRestoreTrap
1.3.6.1.4.1.2011.6.3.8.3.2.0.27 - hwDevUserlabelChangeTrap
1.3.6.1.4.1.2011.6.3.8.2.0.6 - hwDevVoiceFileLZMATrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.48 - hwDeviceHighTemperatureCriticalFaultTrap
1.3.6.1.4.1.2011.6.3.8.3.2.0.18 - hwDeviceHighTemperatureCriticalRestoreTrap
1.3.6.1.4.1.2011.6.3.8.3.2.0.19 - hwDeviceHighTemperatureMajorFaultTrap
1.3.6.1.4.1.2011.6.3.8.3.2.0.16 - hwDeviceHighTemperatureMajorRestoreTrap
1.3.6.1.4.1.2011.6.3.8.3.2.0.17 - hwDeviceHighTemperatureMinorFaultTrap
1.3.6.1.4.1.2011.6.3.8.3.2.0.14 - hwDeviceHighTemperatureMinorRestoreTrap
1.3.6.1.4.1.2011.6.3.8.3.2.0.15 - hwDiagResOverloadFaultTrap
1.3.6.1.4.1.2011.6.3.8.3.5.0.1 - hwDiagResOverloadRestoreTrap
1.3.6.1.4.1.2011.6.3.8.3.5.0.2 - hwFrameAdminResultTrap
1.3.6.1.4.1.2011.6.3.8.5.0.1 - hwFtpConfigureTrap
1.3.6.1.4.1.2011.6.3.8.3.3.0.22 - hwFwdChannelFault
1.3.6.1.4.1.2011.6.3.8.3.2.0.23 - hwFwdChannelFaultResume
1.3.6.1.4.1.2011.6.3.8.3.2.0.24 - hwPortAdminResultTrap
1.3.6.1.4.1.2011.6.3.8.5.0.4 - hwSlotAdminResultTrap
1.3.6.1.4.1.2011.6.3.8.5.0.2 - hwSubSlotAdminResultTrap
1.3.6.1.4.1.2011.6.3.8.5.0.3 - hwVccDataChannelFault
1.3.6.1.4.1.2011.6.3.8.3.2.0.12 - hwVccDataChannelFaultResume
1.3.6.1.4.1.2011.6.3.8.3.2.0.13 - hwVccDataLinkFault
1.3.6.1.4.1.2011.6.3.8.3.2.0.10 - hwVccDataLinkFaultResume
1.3.6.1.4.1.2011.6.3.8.3.2.0.11