HUAWEI-DATASYNC-MIB
HUAWEI Technology Co.,LtdModified hwCfgChgTerminalID.
snmptranslate -m HUAWEI-DATASYNC-MIB -Tpsnmpwalk -v2c -c <community> -m HUAWEI-DATASYNC-MIB <host> 1.3.6.1.4.1.2011.5.25.191Imports
| HUAWEI-MIB | hwDatacomm |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IhwDataSync | 1.3.6.1.4.1.2011.5.25.191 | |||
identity Modified hwCfgChgTerminalID. | ||||
| NhwDataSyncScalarObjects | 1.3.6.1.4.1.2011.5.25.191.1 | |||
| ShwCurrentCfgChgSeqID | 1.3.6.1.4.1.2011.5.25.191.1.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The value of this object identifies the ID of the current configuration change. The value ranges from 0 to 65535. After the ID of the configuration change reaches the maximum value, the value of the ID starts from 1 again. After the device is restarted, the value of the ID becomes 0. | ||||
| ShwCfgChgSeqIDReveralCount | 1.3.6.1.4.1.2011.5.25.191.1.2 | Integer32 | RO | |
scalar · Integer32 · read-only · current The value of this object identifies the cycle count of the index of configuration change table. | ||||
| ShwCfgChgTableMaxItem | 1.3.6.1.4.1.2011.5.25.191.1.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current The value of this object identifies the maximum number of entries in hwCfgChgTable. | ||||
| ShwCfgBaselineTime | 1.3.6.1.4.1.2011.5.25.191.1.4 | DisplayString (SIZE (0..20)) | RO | |
scalar · DisplayString (SIZE (0..20)) · read-only · current Specifies the time of system confiuration was baseline. | ||||
| NhwDataSyncTableObjects | 1.3.6.1.4.1.2011.5.25.191.2 | |||
| ThwCfgChgTable | 1.3.6.1.4.1.2011.5.25.191.2.1 | NA | ||
table · not-accessible · current This table is used to record configuration changes. In this table, you can find the configuration change based on the specific index. | ||||
| RhwCfgChgEntry | 1.3.6.1.4.1.2011.5.25.191.2.1.1 | NA | ||
| ChwCfgChgSeqID | 1.3.6.1.4.1.2011.5.25.191.2.1.1.1 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current The value of this object identifies the configuration change ID. When configuration is changed, the sequence id will plus 1. | ||||
| ChwCfgChgTime | 1.3.6.1.4.1.2011.5.25.191.2.1.1.2 | DateAndTime | RO | |
column · DateAndTime · read-only · current This object indicates the configuration change time. | ||||
| ChwCfgChgTerminalType | 1.3.6.1.4.1.2011.5.25.191.2.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the type of the terminal.
| ||||
| ChwCfgChgTerminalID | 1.3.6.1.4.1.2011.5.25.191.2.1.1.4 | Integer32 (0..2147483647) | RO | |
column · Integer32 (0..2147483647) · read-only · current The value of this object identifies the terminal ID. | ||||
| ChwCfgChgType | 1.3.6.1.4.1.2011.5.25.191.2.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the configuration change type.
| ||||
| ChwCfgChgViewName | 1.3.6.1.4.1.2011.5.25.191.2.1.1.6 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current This object indicates the name of the view in which the configuration change occurs. For the command operation, the object is the name of the view in which the command is run. For the SNMP operation, the object is the OID of the MIB table or the scalar object. | ||||
| ChwCfgChgCmdID | 1.3.6.1.4.1.2011.5.25.191.2.1.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The value of this object identifies the ID of the configuration change command. For the SNMP operation, the value is 0. | ||||
| ChwCfgChgDetailInfo | 1.3.6.1.4.1.2011.5.25.191.2.1.1.8 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current This object indicates detailed configuration change information. For the command operation, the object is the command line. For the SNMP operation, the object is the index of the MIB table. When there are multiple indexes, the format of index1.index2.index3 is adopted. | ||||
| ChwCfgChgUserName | 1.3.6.1.4.1.2011.5.25.191.2.1.1.9 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current This object indicates the username in which the configuration change occurs. | ||||
| ThwCollectTable | 1.3.6.1.4.1.2011.5.25.191.2.2 | NA | ||
table · not-accessible · current This table is used to enable the NMS to send the collecting script to the device to trigger the collection, and then monitor the collection status. | ||||
| RhwCollectEntry | 1.3.6.1.4.1.2011.5.25.191.2.2.1 | NA | ||
| ChwCollectIndex | 1.3.6.1.4.1.2011.5.25.191.2.2.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The value of this object identifies the collection index. | ||||
| ChwCollectNetManageId | 1.3.6.1.4.1.2011.5.25.191.2.2.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current The value of this object identifies the NMS ID. | ||||
| ChwCollectOperation | 1.3.6.1.4.1.2011.5.25.191.2.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the instruction for the collection operation. Default value is stop.
| ||||
| ChwCollectInScriptFile | 1.3.6.1.4.1.2011.5.25.191.2.2.1.4 | OCTET STRING (SIZE (1..255)) | RW | |
column · OCTET STRING (SIZE (1..255)) · read-write · current This object indicates the name of the script file. T he length of the file name ranges from 1 character to 255 characters. | ||||
| ChwCollectInResultFile | 1.3.6.1.4.1.2011.5.25.191.2.2.1.5 | OCTET STRING (SIZE (1..255)) | RW | |
column · OCTET STRING (SIZE (1..255)) · read-write · current This object indicates the name of the result file. The length of the file name ranges from 1 character to 255 characters. | ||||
| ChwCollectState | 1.3.6.1.4.1.2011.5.25.191.2.2.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the collection status.
| ||||
| ChwCollectRowStatus | 1.3.6.1.4.1.2011.5.25.191.2.2.1.7 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the row status. | ||||
| NhwDataSyncNotifications | 1.3.6.1.4.1.2011.5.25.191.3 | |||
| !hwCfgChgNotify | 1.3.6.1.4.1.2011.5.25.191.3.1 | |||
notification · current This trap is generated when a configuration change occurs on the device within a specified period. | ||||
| !hwCfgLastSaveFailNotify | 1.3.6.1.4.1.2011.5.25.191.3.2 | |||
notification · current The last save operation failed, please check the configuration. | ||||
| !hwCfgChangeDetailNotify | 1.3.6.1.4.1.2011.5.25.191.3.3 | |||
notification · current This trap is generated when a configuration change occurs on the device. | ||||
| NhwDataSyncConformance | 1.3.6.1.4.1.2011.5.25.191.4 | |||
| NhwDataSyncGroups | 1.3.6.1.4.1.2011.5.25.191.4.1 | |||
| GhwDataSyncScalarObjectsGroup | 1.3.6.1.4.1.2011.5.25.191.4.1.1 | |||
group · current A collection of objects on DataSync ScalarObjects Information. | ||||
| GhwCfgChgNotifyGroup | 1.3.6.1.4.1.2011.5.25.191.4.1.2 | |||
| GhwDataSyncNotifyGroup | 1.3.6.1.4.1.2011.5.25.191.4.1.3 | |||
group · current A collection of objects on synchronization Configuration Notify Information.
| ||||
| NhwDataSyncCompliances | 1.3.6.1.4.1.2011.5.25.191.4.2 | |||
| MhwDataSyncCompliance | 1.3.6.1.4.1.2011.5.25.191.4.2.1 | |||
compliance · current The compliance statement for entities that support the huawei DataSync MIB. | ||||
Textual conventions
DateAndTimeOCTET STRING (SIZE (8 | 11))Display hint:
2d-1d-1d,1d:1d:1d.1d,1a1d:1dA date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC* 0..13 10 11 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present.
Traps / Notifications
- hwCfgChangeDetailNotify
1.3.6.1.4.1.2011.5.25.191.3.3 - hwCfgChgNotify
1.3.6.1.4.1.2011.5.25.191.3.1 - hwCfgLastSaveFailNotify
1.3.6.1.4.1.2011.5.25.191.3.2