HUAWEI-CONFIG-MAN-MIB
HUAWEI Technology Co.,LtdThe description of some nodes was changed.
snmptranslate -m HUAWEI-CONFIG-MAN-MIB -Tpsnmpwalk -v2c -c <community> -m HUAWEI-CONFIG-MAN-MIB <host> 1.3.6.1.4.1.2011.6.10Imports
| HUAWEI-MIB | huaweiUtility |
|---|---|
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IhwConfig | 1.3.6.1.4.1.2011.6.10 | |||
identity The description of some nodes was changed. | ||||
| NhwConfigManObjects | 1.3.6.1.4.1.2011.6.10.1 | |||
| NhwCfgLog | 1.3.6.1.4.1.2011.6.10.1.1 | |||
| ShwCfgRunModifiedLast | 1.3.6.1.4.1.2011.6.10.1.1.1 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The object records the value of sysUpTime when the current configuration running in the system was last modified. | ||||
| ShwCfgRunSavedLast | 1.3.6.1.4.1.2011.6.10.1.1.2 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The object records the value of sysUpTime when the current configuration running in the system was last saved. If the value of the object is smaller than hwCfgRunModifiedLast, the current configuration has been modified but not saved. | ||||
| ShwCfgStartModifiedLast | 1.3.6.1.4.1.2011.6.10.1.1.3 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The object records the value of sysUpTime when the saved configuration used currently was last modified. It may have been changed by a save of the current configuration running in the system or other methods such as copy. | ||||
| ShwCfgLogLimitedEntries | 1.3.6.1.4.1.2011.6.10.1.1.4 | Integer32 (0..2147483647) | RO | |
scalar · Integer32 (0..2147483647) · read-only · current The object shows the maximum number of rows in hwCfgLogTable. The value supported by the system is 10. | ||||
| ShwCfgLogDeletedEntries | 1.3.6.1.4.1.2011.6.10.1.1.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of rows deleted from hwCfgLogTable. | ||||
| ShwCfgLogWantBackup | 1.3.6.1.4.1.2011.6.10.1.1.6 | TruthValue | RW | |
scalar · TruthValue · read-write · current Decides whether or not to backup the configuration log information. If the value is true, the data of configuration log on the master will be sent to slave. Otherwise the data of log will be lost when master switches to slave. Default value is true. | ||||
| ThwCfgLogTable | 1.3.6.1.4.1.2011.6.10.1.1.7 | NA | ||
table · not-accessible · current A table of configuration log on this device. | ||||
| RhwCfgLogEntry | 1.3.6.1.4.1.2011.6.10.1.1.7.1 | NA | ||
row · not-accessible · current Information about a configuration log in this system.
| ||||
| ChwCfgLogIndex | 1.3.6.1.4.1.2011.6.10.1.1.7.1.1 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current The index of hwCfgLogTable, which is a incremental integer. The maximum value of the node is 2147483647.The table should wrap the value to 1 and flush all the existing entries when the maximum value is reached. | ||||
| ChwCfgLogTime | 1.3.6.1.4.1.2011.6.10.1.1.7.1.2 | TimeTicks | RO | |
column · TimeTicks · read-only · current Specifies the sysUpTime when the configuration log was generated. | ||||
| ChwCfgLogSrcCmd | 1.3.6.1.4.1.2011.6.10.1.1.7.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Specifies the source command resulting in the log. Currently we provide the types of source: 1.cmdLine(1):configuration log instigated by command line. 2.snmp(2):configuration log instigated by snmp. 3.other(3):configuration log instigated by other source unknown.
| ||||
| ChwCfgLogSrcData | 1.3.6.1.4.1.2011.6.10.1.1.7.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The configuration data source for the event. erase erasing destination running operational data alive commandSource the command source itself startup what the system will use next reboot local local NVRAM or flash netFtp FTP network transfer hotPlugging board is inserted or pulled out on line
| ||||
| ChwCfgLogDesData | 1.3.6.1.4.1.2011.6.10.1.1.7.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The configuration data destination for the event. unknown unknown running operational data alive commandSource the command source itself startup what the system will use next reboot local local NVRAM or flash netFtp FTP network transfer hotPlugging board is inserted or pulled out on line
| ||||
| ChwCfgLogTerminalType | 1.3.6.1.4.1.2011.6.10.1.1.7.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Specifies the terminal type. If hwCfgLogSrcData is not 'cmdLine', the value of the object is 'notApplicable'. The value list: notApplicable(1): no meaning at this time. unknown(2): unknown terminal type. console(3): terminal(4) virtual(5) auxiliary(6)
| ||||
| ChwCfgLogTerminalUser | 1.3.6.1.4.1.2011.6.10.1.1.7.1.7 | DisplayString (SIZE (0..256)) | RO | |
column · DisplayString (SIZE (0..256)) · read-only · current The name of a logging user which is available when hwCfgLogSrcCmd is 'cmdLine'. When hwCfgLogTerminalType is 'virtual' and user login in authentication, the object will be the name of the user. Otherwise, it is a zero length string. | ||||
| ChwCfgLogTerminalNum | 1.3.6.1.4.1.2011.6.10.1.1.7.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current Specifies the terminal number. If hwCfgLogSrcCmd variable is not 'cmdLine'(such as 'snmp'or 'other'), the value of the object is '-1'. If hwCfgLogSrcCmd variable is 'cmdLine', the value '-1' means that it is not the active terminal user. | ||||
| ChwCfgLogTerminalLocation | 1.3.6.1.4.1.2011.6.10.1.1.7.1.9 | DisplayString (SIZE (0..64)) | RO | |
column · DisplayString (SIZE (0..64)) · read-only · current The available location of the terminal when hwCfgLogSrcCmd is 'cmdLine'. Otherwise, it is a zero length string. | ||||
| ChwCfgLogCmdSrcAddress | 1.3.6.1.4.1.2011.6.10.1.1.7.1.10 | IpAddress | RO | |
column · IpAddress · read-only · current The address from which a request comes when the value of hwCfgLogSrcCmd is 'snmp(2)'. The ip address of the remote system connected when the value of hwCfgLogTerminalType is 'virtual'. Otherwise, the value of the object is 0.0.0.0. | ||||
| ChwCfgLogVirHost | 1.3.6.1.4.1.2011.6.10.1.1.7.1.11 | DisplayString (SIZE (0..64)) | RO | |
column · DisplayString (SIZE (0..64)) · read-only · current The available host name of the remote system connected if hwCfgLogTerminalType has the value of 'virtual'. Otherwise, the value of the object is a zero length string. | ||||
| ChwCfgLogUserName | 1.3.6.1.4.1.2011.6.10.1.1.7.1.12 | DisplayString (SIZE (0..256)) | RO | |
column · DisplayString (SIZE (0..256)) · read-only · current The user name used when hwCfgLogSrcData or hwCfgLogDesData has the value of 'netFtp'. Otherwise, the value of the object is a zero length string. | ||||
| ChwCfgLogServerAddress | 1.3.6.1.4.1.2011.6.10.1.1.7.1.13 | IpAddress | RO | |
column · IpAddress · read-only · current The remote server address when hwCfgLogSrcData or hwCfgLogDesData has the value of 'netFtp'. Otherwise, the value of the object is 0.0.0.0. | ||||
| ChwCfgLogFile | 1.3.6.1.4.1.2011.6.10.1.1.7.1.14 | DisplayString (SIZE (0..64)) | RO | |
column · DisplayString (SIZE (0..64)) · read-only · current The remote file name when hwCfgLogSrcData or hwCfgLogDesData has the value of 'netFtp'. Otherwise, the value of the object is a zero length string. | ||||
| ChwCfgLogConfigChangeId | 1.3.6.1.4.1.2011.6.10.1.1.7.1.15 | Unsigned32 (0..4294967294) | RO | obsolete |
column · Unsigned32 (0..4294967294) · read-only · obsolete This is the sequence ID of configuration. When configuration is changed, ID is added. | ||||
| ChwCfgLogCfgBaselineTime | 1.3.6.1.4.1.2011.6.10.1.1.7.1.16 | DisplayString (SIZE (0..20)) | RO | obsolete |
column · DisplayString (SIZE (0..20)) · read-only · obsolete Specifies the time of system confiuration was baseline. | ||||
| NhwCfgOperate | 1.3.6.1.4.1.2011.6.10.1.2 | |||
| ShwCfgOperateGlobalEntryLimit | 1.3.6.1.4.1.2011.6.10.1.2.1 | Integer32 (1..10) | RO | |
scalar · Integer32 (1..10) · read-only · current The maximum number of copy entries that may be held in hwCfgOperateTable. A particular setting does not guarantee that much data can be held. | ||||
| ShwCfgOperateEntryAgeOutTime | 1.3.6.1.4.1.2011.6.10.1.2.2 | Integer32 (1..60) | RW | |
scalar · Integer32 (1..60) · read-write · current This value indicates the primary reference time of the hwCfgOperateEntry saved in the hwCfgOperateTable. Default value is 5.
| ||||
| ShwCfgOperateResultGlobalEntryLimit | 1.3.6.1.4.1.2011.6.10.1.2.3 | Integer32 (1..50) | RW | |
scalar · Integer32 (1..50) · read-write · current The maximum number of copy entries that may be held in hwCfgOperateResultTable. Default value is 5. | ||||
| ThwCfgOperateTable | 1.3.6.1.4.1.2011.6.10.1.2.4 | NA | ||
table · not-accessible · current A table of config-operation requests. | ||||
| RhwCfgOperateEntry | 1.3.6.1.4.1.2011.6.10.1.2.4.1 | NA | ||
| ChwCfgOperateIndex | 1.3.6.1.4.1.2011.6.10.1.2.4.1.1 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current The unique index value of a row in this table. | ||||
| ChwCfgOperateType | 1.3.6.1.4.1.2011.6.10.1.2.4.1.2 | ConfigOperationType | RC | |
column · ConfigOperationType · read-create · current Specifies the type of an operation on configuration. For detailed information, please see the ConfigOperationType definition. | ||||
| ChwCfgOperateProtocol | 1.3.6.1.4.1.2011.6.10.1.2.4.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current If the value of hwCfgOperateType is running2Net,net2Running,net2Startup or startup2net, this object specifies the protocol which is used for file transfer . The default protocol is ftp if no protocol is specified. And for other value of hwCfgOperateType , this object may be ignored by the implementation. When hwCfgOperateProtocol is specified as SFTP, only password authentication-type is valid.
| ||||
| ChwCfgOperateFileName | 1.3.6.1.4.1.2011.6.10.1.2.4.1.4 | DisplayString (SIZE (0..128)) | RC | |
column · DisplayString (SIZE (0..128)) · read-create · current When the object of hwCfgOperateType has the value of net2Startup, net2Running or running2Net, the value must be specified. The file name may include the path if applicable. If the value of hwCfgOperateType is net2Startup or net2Running, this node specifies the source file name of transfers. If the value of hwCfgOperateType is running2Net, this node specifies the destination file name of transfers. If the value of hwCfgOperateType is running2Startup, this node specifies the saved file name of current running configuration. When hwCfgOperateType has the value of startup2Net or startup2Running, the object may not be created instead of using the file name of startup configuration file. | ||||
| ChwCfgOperateServerAddress | 1.3.6.1.4.1.2011.6.10.1.2.4.1.5 | IpAddress | RC | |
column · IpAddress · read-create · current When the operation type is running2Net,net2Running,net2Startup or startup2net , the ip address of the FTP/TFTP/SFTP server from/to which to download/upload must be specified. Values of 0.0.0.0 or FF.FF.FF.FF are not permitted. | ||||
| ChwCfgOperateUserName | 1.3.6.1.4.1.2011.6.10.1.2.4.1.6 | DisplayString (SIZE (0..40)) | RC | |
column · DisplayString (SIZE (0..40)) · read-create · current When the operation type is running2Net,net2Running,net2Startup or startup2net , the user name for the FTP/SFTP server from/to which to download/upload should be specified. The object must be created if hwCfgOperateProtocol has the value of 'ftp'. | ||||
| ChwCfgOperateUserPassword | 1.3.6.1.4.1.2011.6.10.1.2.4.1.7 | DisplayString (SIZE (0..40)) | RC | |
column · DisplayString (SIZE (0..40)) · read-create · current When the operation type is running2Net,net2Running,net2Startup or startup2net , the user password for the FTP/SFTP server from/to which to download/upload should be specified. The object must be created if hwCfgOperateProtocol has the value of 'ftp'. When get the value of the field, the device will return a zero-length string. When set the field, its value cannot be a string that contains no character. | ||||
| ChwCfgOperateEndNotificationSwitch | 1.3.6.1.4.1.2011.6.10.1.2.4.1.8 | TruthValue | RC | |
column · TruthValue · read-create · current Specifies whether or not a notification should be issued on the completion of the operation. | ||||
| ChwCfgOperateRowStatus | 1.3.6.1.4.1.2011.6.10.1.2.4.1.9 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this table entry. When the status is active : (1) In the situation that the specified transfer operation by ftp/tftp is in progress, the transfer operation will be aborted if the status is set to notInService. (2) In any other situations, the specified operation will not be aborted even if the status is set to notInService. | ||||
| ChwCfgOperateServerPort | 1.3.6.1.4.1.2011.6.10.1.2.4.1.10 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current This object specifies the SFTP/FTP server port that is used for file transfer only if the value of hwCfgOperateProtocol is sftp/ftp. The default SFTP server port is 22 if no port is specified. The default FTP server port is 21 if no port is specified. If the value of hwCfgOperateProtocol is not sftp/ftp, this object is ignored by the implementation. | ||||
| ChwCfgOperateSourceAddress | 1.3.6.1.4.1.2011.6.10.1.2.4.1.11 | IpAddress | RC | |
column · IpAddress · read-create · current The source IP address. When the operation type is running2Net, net2Running, net2Startup or startup2net, the source IP address of the client may be specified or not. Default is 0.0.0.0 . If the source type is set to both of IP address and interface, the former has the priority. | ||||
| ChwCfgOperateSourceInterface | 1.3.6.1.4.1.2011.6.10.1.2.4.1.12 | OCTET STRING (SIZE (1..47)) | RC | |
column · OCTET STRING (SIZE (1..47)) · read-create · current The name of the interface.When the operation type is running2Net, net2Running,net2Startup or startup2net, the source interface of the FTP/TFTP client may be specified or not. If the source type is set to both of IP address and interface,the former has the priority. | ||||
| ChwCfgOperateOnError | 1.3.6.1.4.1.2011.6.10.1.2.4.1.13 | INTEGER | RC | |
column · INTEGER · read-create · current This object specifies the action when a configuration command fails to be executed. continueOnError: skips the failed configuration command and continues to run other configuration commands. stopOnError: stops running the failed configuration command and does not run other configuration commands. rollbackOnError: rolls back the configuration to that before the configuration file is executed.
| ||||
| ChwCfgOperateServerAddressType | 1.3.6.1.4.1.2011.6.10.1.2.4.1.17 | InetAddressType | RC | |
column · InetAddressType · read-create · current The ip address type of the FTP/TFTP/SFTP server from/to which to download/upload must be specified. 1 is used for ipv4, 2 is used for ipv6. | ||||
| ChwCfgOperateServerAddressNet | 1.3.6.1.4.1.2011.6.10.1.2.4.1.18 | InetAddress | RC | |
column · InetAddress · read-create · current Address or host name of the FTP/TFTP/SFTP server from/to which to download/upload must be specified. | ||||
| ChwCfgOperateVpnInstance | 1.3.6.1.4.1.2011.6.10.1.2.4.1.19 | DisplayString (SIZE (0..31)) | RC | |
column · DisplayString (SIZE (0..31)) · read-create · current The VPN instance name that through which to transfer the file. | ||||
| ThwCfgOperateResultTable | 1.3.6.1.4.1.2011.6.10.1.2.5 | NA | ||
table · not-accessible · current A table of config-operation requests result. | ||||
| RhwCfgOperateResultEntry | 1.3.6.1.4.1.2011.6.10.1.2.5.1 | NA | ||
row · not-accessible · current The result entries of configuration operation requests. | ||||
| ChwCfgOperateResultIndex | 1.3.6.1.4.1.2011.6.10.1.2.5.1.1 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current The index of Table, which is an incremental integer. The maximum value of the node is 2147483647.The agent should wrap the value to 1 and flush all the existing entries when the maximum value is reached. | ||||
| ChwCfgOperateResultOptIndex | 1.3.6.1.4.1.2011.6.10.1.2.5.1.2 | Integer32 (1..2147483647) | RO | |
column · Integer32 (1..2147483647) · read-only · current The operation index in the hwCfgOperateTable. | ||||
| ChwCfgOperateResultOpType | 1.3.6.1.4.1.2011.6.10.1.2.5.1.3 | ConfigOperationType | RO | |
column · ConfigOperationType · read-only · current The operation type in the hwCfgOperateTable. | ||||
| ChwCfgOperateState | 1.3.6.1.4.1.2011.6.10.1.2.5.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The status of the specified operation.
opInProgress :
specified operation is active
opOperationSuccess :
specified operation is supported and
completed successfully
opInvalidOperation :
command invalid or command/protocol/device
combination unsupported
opInvalidProtocol :
invalid protocol specified
opInvalidSourceName :
invalid source file name specified.
opInvalidDestName :
invalid target name specified.
opInvalidServerAddress :
invalid server address specified
opDeviceBusy :
specified device is in use and locked by
another process
opDeviceOpenError :
invalid device name
opDeviceError :
device read, write or erase error
opDeviceNotProgrammable :
device is read-only but a write or erase
operation was specified
opDeviceFull :
device is filled to capacity
opFileOpenError :
invalid file name; file not found in partition
opFileTransferError :
file transfer was unsuccessfull; network failure
opFileChecksumError :
file checksum in Flash failed
opNoMemory :
system running low on memory
opAuthFail:
invalid user name or password
opTimeOut :
file transfer was timeout
opUnknownFailure :
failure unknown
opAbort :
transfer operation has been aborted
opInvalidSourceAdress :
invalid source address specified.
opInvalidSourceInterface :
invalid source interface specified.
opCmdExecuteFail :
execute command return error.
opWaitFileTrans :
device is ready, wait nms file transfer.
opLockStartUp :
the next startup file is locked by another user.
opSetStartupFileFail :
set startup file fail.
opGetStartupFileFailInMiniSystem :
get next startup file fail in mini-system mode.
| ||||
| ChwCfgOperateTime | 1.3.6.1.4.1.2011.6.10.1.2.5.1.5 | TimeTicks | RO | |
column · TimeTicks · read-only · current Records the time taken for the operation. This object will be like a stopwatch, starting when the operation starts, and stopping when the operation completes. | ||||
| ChwCfgOperateEndTime | 1.3.6.1.4.1.2011.6.10.1.2.5.1.6 | TimeTicks | RO | |
column · TimeTicks · read-only · current The value of sysUpTime when the configuration operation is finished. | ||||
| ChwCfgOperateTransferProgress | 1.3.6.1.4.1.2011.6.10.1.2.5.1.7 | Integer32 (1..100 | 65535) | RO | |
column · Integer32 (1..100 | 65535) · read-only · current This object indicates progress of file transfer in the hwCfgOperateTable. When hwCfgOperateProtocol is specified as 2(tftp) or 3(sftp), and hwCfgOperateType is specified as net2Running or net2Startup, this object will be set as 65535, which indicates the progress can not be calculated. | ||||
| ChwCfgOperateErrorReason | 1.3.6.1.4.1.2011.6.10.1.2.5.1.8 | DisplayString (SIZE (1..255)) | RO | |
column · DisplayString (SIZE (1..255)) · read-only · current The failure reason of configuration operation. | ||||
| ThwCfgModuleChangeTimeTable | 1.3.6.1.4.1.2011.6.10.1.2.6 | NA | ||
table · not-accessible · current Table on changes of configuration. | ||||
| RhwCfgModuleChangeTimeEntry | 1.3.6.1.4.1.2011.6.10.1.2.6.1 | NA | ||
| ChwCfgModuleId | 1.3.6.1.4.1.2011.6.10.1.2.6.1.1 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current Module index. It is an integer without enumeration. This is because the enumeration may expose the classification methods of modules. In addition, this field is uncertain in the beginning stage and once the value is determined, it cannot be modified. | ||||
| ChwCfgModuleChangeTime | 1.3.6.1.4.1.2011.6.10.1.2.6.1.11 | TimeTicks | RO | |
column · TimeTicks · read-only · current Time on changes of the module. | ||||
| ShwCfgOperateCompareConfig | 1.3.6.1.4.1.2011.6.10.1.2.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current compare configuration of the files
| ||||
| ShwCfgRestoreErrCode | 1.3.6.1.4.1.2011.6.10.1.2.8 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current ErrorCode: cause of an alarm. (1: Failed to restore some configurations. 2: Failed to restore all configurations because of a failure to open the configuration file. 3: Failed to restore all configurations because of the nonexistent configuration file. 4: Failed to restore all configurations because of the nonexistent configuration file. 5: Failed to restore all configurations because of other reasons.)
| ||||
| NhwCfgSave | 1.3.6.1.4.1.2011.6.10.1.3 | |||
| ShwCfgSaveAutoInterval | 1.3.6.1.4.1.2011.6.10.1.3.1 | Integer32 (0 | 30..43200) | RW | |
scalar · Integer32 (0 | 30..43200) · read-write · current The object records the interval minute of saving configuration automatically. the function of saving configuration automatically is disable when the interval is zero, else it is enable(the default is 30 minutes). | ||||
| ShwCfgSaveAutoTime | 1.3.6.1.4.1.2011.6.10.1.3.2 | DateAndTime | RO | |
scalar · DateAndTime · read-only · current The object records the latest date and time when the current configurations were saved automatically in the system. | ||||
| ShwCfgSaveManualTime | 1.3.6.1.4.1.2011.6.10.1.3.3 | DateAndTime | RO | |
scalar · DateAndTime · read-only · current The object records the latest date and time when the current configurations were saved manually in the system. | ||||
| ShwCfgSaveAutoCpuLimit | 1.3.6.1.4.1.2011.6.10.1.3.4 | Integer32 (1..100) | RW | |
scalar · Integer32 (1..100) · read-write · current This object indicates the upper limit of the CPU usage when configurations are automatically saved. If the function of saving configuration automatically is not enabled, the value is insignificant. Default value is 50. | ||||
| ShwCfgSaveAutoNoCfgInterval | 1.3.6.1.4.1.2011.6.10.1.3.5 | Integer32 (30..43200) | RW | obsolete |
scalar · Integer32 (30..43200) · read-write · obsolete This object indicates the interval from the time configurations are automatically saved to now.If the function of saving configuration automatically is not enabled, the value is insignificant. Default value is 30. | ||||
| ShwCfgSaveAutoDelay | 1.3.6.1.4.1.2011.6.10.1.3.6 | Integer32 (1..60) | RW | |
scalar · Integer32 (1..60) · read-write · current This object indicates the delay minute after some configurations change happens then configurations are automatically saved. If the function of saving configuration automatically is not enabled, the value is insignificant. Default value is 5. | ||||
| ThwCfgBackup2ServerTable | 1.3.6.1.4.1.2011.6.10.1.3.7 | NA | ||
table · not-accessible · current A table of config-operation requests. | ||||
| RhwCfgBackup2ServerEntry | 1.3.6.1.4.1.2011.6.10.1.3.7.1 | NA | ||
| ChwCfgBackupIndex | 1.3.6.1.4.1.2011.6.10.1.3.7.1.1 | Integer32 (0..4) | AN | |
column · Integer32 (0..4) · accessible-for-notify · current The unique index value of a row in this table. | ||||
| ChwCfgBackupServerIp | 1.3.6.1.4.1.2011.6.10.1.3.7.1.2 | InetAddress | RC | |
column · InetAddress · read-create · current The ip address of the FTP/TFTP/SFTP server to which to the device backup configuration automatically. Values of 0.0.0.0 or FF.FF.FF.FF are not permitted. | ||||
| ChwCfgBackupProtocol | 1.3.6.1.4.1.2011.6.10.1.3.7.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current The protocol used to backup configuration to server automatically.
| ||||
| ChwCfgBackupUser | 1.3.6.1.4.1.2011.6.10.1.3.7.1.4 | DisplayString (SIZE (1..64)) | RC | |
column · DisplayString (SIZE (1..64)) · read-create · current The length of the user name should range from 1 to 64. | ||||
| ChwCfgBackupPassword | 1.3.6.1.4.1.2011.6.10.1.3.7.1.5 | OCTET STRING (SIZE (0..392)) | RC | |
column · OCTET STRING (SIZE (0..392)) · read-create · current The password can be plain text or encripted text. If the password is plain text, its length should range from 0 to 255. If the password is in cipher text, its length is 24 or from 32 to 392. When get the value of the field, the device will return a zero-length string. When set the field, its value cannot be a string that contains no character. | ||||
| ChwCfgBackupServerPath | 1.3.6.1.4.1.2011.6.10.1.3.7.1.6 | DisplayString (SIZE (1..64)) | RC | |
column · DisplayString (SIZE (1..64)) · read-create · current The length of the path in the backup server should range from 1 to 64. | ||||
| ChwCfgBackupRowStatus | 1.3.6.1.4.1.2011.6.10.1.3.7.1.7 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this table entry. | ||||
| ChwCfgBackupResult | 1.3.6.1.4.1.2011.6.10.1.3.7.1.8 | DisplayString (SIZE (1..64)) | RO | |
column · DisplayString (SIZE (1..64)) · read-only · current This object is only for trap information, and does not support get and get-next operation. | ||||
| ChwCfgBackupVpnInstance | 1.3.6.1.4.1.2011.6.10.1.3.7.1.9 | DisplayString (SIZE (0..31)) | RC | |
column · DisplayString (SIZE (0..31)) · read-create · current The VPN instance name that through which to transfer the file. | ||||
| ChwCfgBackupServerPort | 1.3.6.1.4.1.2011.6.10.1.3.7.1.10 | Integer32 (1..65535) | RC | |
column · Integer32 (1..65535) · read-create · current The port number of the server to which to the device backup configuration automatically. | ||||
| ChwCfgBackupServerAddrType | 1.3.6.1.4.1.2011.6.10.1.3.7.1.11 | InetAddressType | RC | |
column · InetAddressType · read-create · current The address type of the hwCfgBackupServerIp entry.
| ||||
| NhwCfgLock | 1.3.6.1.4.1.2011.6.10.1.4 | |||
| ShwCfgOperateLockConfigDataStore | 1.3.6.1.4.1.2011.6.10.1.4.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Config data unit lock/unlock controller,if set active(2),the lock will be locked if no one locked it before. if set inactive(1),the lock will be unlocked if the currunt user locked it before.
| ||||
| ThwCfgOperateLevelUsersTable | 1.3.6.1.4.1.2011.6.10.1.4.2 | NA | ||
table · not-accessible · current Table on users of configuration lock or level. | ||||
| RhwCfgOperateLevelUsersEntry | 1.3.6.1.4.1.2011.6.10.1.4.2.1 | NA | ||
row · not-accessible · current Users entity on lock or level of the configuration module. | ||||
| ChwCfgOperateLevelUsersSessionID | 1.3.6.1.4.1.2011.6.10.1.4.2.1.1 | Integer32 (-1..2147483647) | RO | |
column · Integer32 (-1..2147483647) · read-only · current SessionID of users who have the configuration level or have locked the configuration. | ||||
| ChwCfgOperateLevelUsersSessionDesc | 1.3.6.1.4.1.2011.6.10.1.4.2.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current Description of users who have the configuration level or have locked the configuration. | ||||
| ChwCfgOperateLevelUsersName | 1.3.6.1.4.1.2011.6.10.1.4.2.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current UserName of users who have the configuration level or have locked the configuration. | ||||
| ChwCfgOperateLevelUsersLockedTime | 1.3.6.1.4.1.2011.6.10.1.4.2.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current LoginTime of users who have the configuration level or have locked the configuration. | ||||
| ChwCfgOperateLevelUsersIPAddr | 1.3.6.1.4.1.2011.6.10.1.4.2.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current IP Address of users who have the configuration level or have locked the configuration. | ||||
| ChwCfgOperateLevelUsersLastCfgTime | 1.3.6.1.4.1.2011.6.10.1.4.2.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current The last configurate Time of users who have the configuration level or have locked the configuration. | ||||
| ChwCfgOperateLevelUsersTimeout | 1.3.6.1.4.1.2011.6.10.1.4.2.1.7 | Integer32 (1..7200) | RO | |
column · Integer32 (1..7200) · read-only · current Unlock without configuration seconds, 1-7200, the default is 30 | ||||
| NhwCfgTrapObject | 1.3.6.1.4.1.2011.6.10.1.5 | |||
| ShwCfgOperateLockByUserUserName | 1.3.6.1.4.1.2011.6.10.1.5.1 | DisplayString | AN | |
scalar · DisplayString · accessible-for-notify · current Name of a user who locks the configuration. | ||||
| ShwCfgOperateUnlockByUserUserName | 1.3.6.1.4.1.2011.6.10.1.5.2 | DisplayString | AN | |
scalar · DisplayString · accessible-for-notify · current Name of a user who unlocks the configuration. | ||||
| ShwCfgOperateLockByUserLockId | 1.3.6.1.4.1.2011.6.10.1.5.3 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current Unique ID of a configuration lock. | ||||
| ShwCfgOperateLockByUserLockedTime | 1.3.6.1.4.1.2011.6.10.1.5.4 | DisplayString | AN | |
scalar · DisplayString · accessible-for-notify · current Time when the configuration is locked. | ||||
| ShwCfgOperateUnlockByUserUnlockedTime | 1.3.6.1.4.1.2011.6.10.1.5.5 | DisplayString | AN | |
scalar · DisplayString · accessible-for-notify · current Time when the configuration is unlocked. | ||||
| ShwCfgConfigChangeIsInner | 1.3.6.1.4.1.2011.6.10.1.5.6 | Integer32 (0..1) | AN | |
scalar · Integer32 (0..1) · accessible-for-notify · current Whether an internal change. | ||||
| ShwCfgConfigChangeUserName | 1.3.6.1.4.1.2011.6.10.1.5.7 | DisplayString | AN | |
scalar · DisplayString · accessible-for-notify · current Name of the user who triggers the configuration change. | ||||
| ShwCfgConfigChangeSessionId | 1.3.6.1.4.1.2011.6.10.1.5.8 | Integer32 (0..65535) | AN | |
scalar · Integer32 (0..65535) · accessible-for-notify · current ID of the session that initiates the configuration change. | ||||
| ShwCfgConfigChangeSrcAddress | 1.3.6.1.4.1.2011.6.10.1.5.9 | InetAddress | AN | |
scalar · InetAddress · accessible-for-notify · current Source address that initiates the configuration change. | ||||
| ShwCfgConfigChangeStorageType | 1.3.6.1.4.1.2011.6.10.1.5.10 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current Type of the storage warehouse where the configuration change occurs.
| ||||
| ShwCfgConfigChangeTerminalType | 1.3.6.1.4.1.2011.6.10.1.5.11 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current Type of the terminal that initiates the configuration change
| ||||
| ShwcfgStartupFileIntegrityFailFileType | 1.3.6.1.4.1.2011.6.10.1.5.12 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current Type of the startup configuration file whose integrity check fails.
| ||||
| NhwConfigManNotifications | 1.3.6.1.4.1.2011.6.10.2 | |||
| !hwCfgManEventlog | 1.3.6.1.4.1.2011.6.10.2.1 | |||
notification · current If the system configuration is changed, a notification is generated. | ||||
| !hwCfgOperateCompletion | 1.3.6.1.4.1.2011.6.10.2.2 | |||
notification · current When a configuration operation has been done, a notification may be generated. | ||||
| !hwCfgInconsistent | 1.3.6.1.4.1.2011.6.10.2.3 | obsolete | ||
notification · obsolete When the system automatically detects that configurations of the AMB and the SMB are inconsistent, the trap is generated. | ||||
| !hwCfgInconsistentResume | 1.3.6.1.4.1.2011.6.10.2.4 | obsolete | ||
notification · obsolete When the system automatically detects that configurations of the AMB and the SMB change from inconsistent to consistent, the trap is generated. | ||||
| !hwCfgB2STransferFail | 1.3.6.1.4.1.2011.6.10.2.5 | |||
notification · current When the system failed to backup current configuration to specified server, this trap will generate to indicates the details information. | ||||
| !hwCfgB2SOperate | 1.3.6.1.4.1.2011.6.10.2.6 | |||
notification · current When the system begin to backup current configuration to servers, this trap will generate. | ||||
| !hwCfgRestoreFail | 1.3.6.1.4.1.2011.6.10.2.7 | |||
notification · current When configuration restoration fails, this trap is generated.
| ||||
| !hwCfgRestoreSuccess | 1.3.6.1.4.1.2011.6.10.2.8 | |||
notification · current When configuration restoration succeeds, this trap is generated. | ||||
| !hwConfigInconsistent | 1.3.6.1.4.1.2011.6.10.2.9 | |||
notification · current When system automatically detects that configurations of the main board and the slave board are inconsistent, this trap is generated. | ||||
| !hwConfigInconsistentResume | 1.3.6.1.4.1.2011.6.10.2.10 | |||
notification · current When system automatically detects that configurations of the main board and the slave board change from inconsistent to consistent, this trap is generated. | ||||
| !hwCfgAppDataInconsistent | 1.3.6.1.4.1.2011.6.10.2.11 | |||
notification · current When the system automatically detects that configurations of the application and the Master Main Board are inconsistent, the trap is generated. | ||||
| !hwCfgAppDataInconsistentResume | 1.3.6.1.4.1.2011.6.10.2.12 | |||
notification · current When the system automatically detects that configurations of the application and the Master Main Board change from inconsistent to consistent, the trap is generated. | ||||
| !hwNextStartupFileInconsistent | 1.3.6.1.4.1.2011.6.10.2.13 | |||
notification · current When the system automatically detects that the next startup files of the master and slave main control boards are inconsistent, this trap is generated. | ||||
| !hwNextStartupFileInconsistentResume | 1.3.6.1.4.1.2011.6.10.2.14 | |||
notification · current When the system automatically detects that the next startup files of the master and slave main control boards become consistent, this trap is generated. | ||||
| !hwCfgLockConfigurationByUser | 1.3.6.1.4.1.2011.6.10.2.15 | |||
notification · current The trap is generated when a user locks system configurations. | ||||
| !hwCfgUnlockConfigurationByUser | 1.3.6.1.4.1.2011.6.10.2.16 | |||
notification · current The trap is generated when a user unlocks system configurations. | ||||
| !hwCfgConfigChangeLog | 1.3.6.1.4.1.2011.6.10.2.17 | |||
notification · current The trap is generated when a configuration changes. | ||||
| !hwCfgMemoryInsufficient | 1.3.6.1.4.1.2011.6.10.2.18 | |||
notification · current The trap is generated when system memory is not enough to complete configuration editing. | ||||
| !hwCfgMemoryInsufficientResume | 1.3.6.1.4.1.2011.6.10.2.19 | |||
notification · current The trap is generated when the hwCfgMemoryInsufficient trap is manually cleared by user. | ||||
| !hwCfgNextStartupFileIntegrityFail | 1.3.6.1.4.1.2011.6.10.2.20 | |||
notification · current The trap is generated when the integrity check of the the next startup configuration file fails. | ||||
| !hwcfgStartupFileIntegrityFail | 1.3.6.1.4.1.2011.6.10.2.21 | |||
notification · current The trap is generated when the integrity check of the startup configuration file fails. | ||||
| !hwcfgStartupFileIntegrityFailResume | 1.3.6.1.4.1.2011.6.10.2.22 | |||
notification · current The trap is generated when the hwcfgStartupFileIntegrityFail trap is manually cleared by user. | ||||
| !hwCfgMinisystemConfigRecovery | 1.3.6.1.4.1.2011.6.10.2.23 | |||
notification · current The trap is generated when the system restores to the minimum system configuration. | ||||
| !hwCfgMinisystemConfigRecoveryClear | 1.3.6.1.4.1.2011.6.10.2.24 | |||
notification · current The trap is generated when the system does not restore the system to the minimum system configuration. | ||||
| NhwConfigManConformance | 1.3.6.1.4.1.2011.6.10.3 | |||
| NhwConfigManCompliances | 1.3.6.1.4.1.2011.6.10.3.1 | |||
| MhwConfigManCompliance | 1.3.6.1.4.1.2011.6.10.3.1.1 | |||
compliance · current The compliance statement for entities implementing the Huawei Configuration Management MIB | ||||
| NhwConfigManGroups | 1.3.6.1.4.1.2011.6.10.3.2 | |||
| GhwCfgManLogGroup | 1.3.6.1.4.1.2011.6.10.3.2.1 | |||
group · current A collection of objects configuration log group.
| ||||
| GhwCfgOperateGroup | 1.3.6.1.4.1.2011.6.10.3.2.2 | |||
group · current A group of configuration operation.
| ||||
| GhwCfgManNotificationGroup | 1.3.6.1.4.1.2011.6.10.3.2.3 | |||
group · current Collection of notification objects.
| ||||
| GhwCfgSaveGroup | 1.3.6.1.4.1.2011.6.10.3.2.4 | |||
group · current A group of configuration operation. | ||||
Textual conventions
ConfigOperationTypeINTEGERnet2Running(4)net2Startup(5)running2Net(3)running2Startup(1)startup2Net(6)startup2Running(2)Specify operation types on configuration. Currently, following types of operation are provided: running2Startup(1):refresh the saved configuration file used currently with current configuration running in the system. The operation is the same as that of [save] command from command line.(running->startup) startup2Running(2):append the configration of the saved configuration file used currently to current configuration running in the system.(running<-startup) running2Net(3):Send the current configuration running in the system to the network through a certain protocol.(running->networkFile) net2Running(4):append the configration of a remote file from network to current configuration running in the system through a certain protocol.(running<-networkFile) net2Startup(5):Download a remote file to the local system to be the saved configuration file used currently through a certain protocol.(startup<-networkFile) startup2Net(6):Send the saved configuration file used currently to the network through a certain protocol. (startup ->networkFile)
Traps / Notifications
- hwCfgAppDataInconsistent
1.3.6.1.4.1.2011.6.10.2.11 - hwCfgAppDataInconsistentResume
1.3.6.1.4.1.2011.6.10.2.12 - hwCfgB2SOperate
1.3.6.1.4.1.2011.6.10.2.6 - hwCfgB2STransferFail
1.3.6.1.4.1.2011.6.10.2.5 - hwCfgConfigChangeLog
1.3.6.1.4.1.2011.6.10.2.17 - hwCfgInconsistent
1.3.6.1.4.1.2011.6.10.2.3 - hwCfgInconsistentResume
1.3.6.1.4.1.2011.6.10.2.4 - hwCfgLockConfigurationByUser
1.3.6.1.4.1.2011.6.10.2.15 - hwCfgManEventlog
1.3.6.1.4.1.2011.6.10.2.1 - hwCfgMemoryInsufficient
1.3.6.1.4.1.2011.6.10.2.18 - hwCfgMemoryInsufficientResume
1.3.6.1.4.1.2011.6.10.2.19 - hwCfgMinisystemConfigRecovery
1.3.6.1.4.1.2011.6.10.2.23 - hwCfgMinisystemConfigRecoveryClear
1.3.6.1.4.1.2011.6.10.2.24 - hwCfgNextStartupFileIntegrityFail
1.3.6.1.4.1.2011.6.10.2.20 - hwCfgOperateCompletion
1.3.6.1.4.1.2011.6.10.2.2 - hwCfgRestoreFail
1.3.6.1.4.1.2011.6.10.2.7 - hwCfgRestoreSuccess
1.3.6.1.4.1.2011.6.10.2.8 - hwCfgUnlockConfigurationByUser
1.3.6.1.4.1.2011.6.10.2.16 - hwConfigInconsistent
1.3.6.1.4.1.2011.6.10.2.9 - hwConfigInconsistentResume
1.3.6.1.4.1.2011.6.10.2.10 - hwNextStartupFileInconsistent
1.3.6.1.4.1.2011.6.10.2.13 - hwNextStartupFileInconsistentResume
1.3.6.1.4.1.2011.6.10.2.14 - hwcfgStartupFileIntegrityFail
1.3.6.1.4.1.2011.6.10.2.21 - hwcfgStartupFileIntegrityFailResume
1.3.6.1.4.1.2011.6.10.2.22