HUAWEI-BFD-MIB
HUAWEI Technology Co.,LtdMIB interface of BFD protocol configuration. The Bidirectional Forwarding Detection (BFD) protocol is standardized by the IETF. BFD detects the traffic forwarding capability of the link or system by quickly sending BFD control packets (the UDP packets in a specified format) at intervals between two nodes.
snmptranslate -m HUAWEI-BFD-MIB -Tpsnmpwalk -v2c -c <community> -m HUAWEI-BFD-MIB <host> 1.3.6.1.4.1.2011.5.25.38Imports
| HUAWEI-MIB | hwDatacomm |
|---|---|
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| IPV6-TC | Ipv6Address |
| P-BRIDGE-MIB | EnabledStatus |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IhwBFDMIB | 1.3.6.1.4.1.2011.5.25.38 | |||
identity MIB interface of BFD protocol configuration. The Bidirectional Forwarding Detection (BFD) protocol is standardized by the IETF. BFD detects the traffic forwarding capability of the link or system by quickly sending BFD control packets (the UDP packets in a specified format) at intervals between two nodes. | ||||
| NhwBfdScalarsObjects | 1.3.6.1.4.1.2011.5.25.38.1 | |||
| ShwBfdVersionNumber | 1.3.6.1.4.1.2011.5.25.38.1.1 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current The current version number of the BFD protocol is 1. Default: 1 | ||||
| ShwBfdAdminStatus | 1.3.6.1.4.1.2011.5.25.38.1.2 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current Describe the administrative status of a BFD protocol. Options: 1. enabled(1) -denotes that the BFD Process is active on all interface 2. disabled(2) -denotes that the BFD process is disabled on all interfaces Default: 2 | ||||
| ShwBfdSessLimitNumber | 1.3.6.1.4.1.2011.5.25.38.1.3 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current Define the maximum number of BFD sessions allowed in the logic router. Default: 0 | ||||
| ShwBfdSessInterfaceLimitNumber | 1.3.6.1.4.1.2011.5.25.38.1.4 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current Define the maximum number of BFD sessions allowed per board. Default: 0 | ||||
| ShwBfdSessStaticNumber | 1.3.6.1.4.1.2011.5.25.38.1.5 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current The total number of BFD static sessions. Default: 0 | ||||
| ShwBfdSessDynamicNumber | 1.3.6.1.4.1.2011.5.25.38.1.6 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current The total number of BFD dynamic sessions. Default: 0 | ||||
| ShwBfdSessGlobalDefaultIpAddr | 1.3.6.1.4.1.2011.5.25.38.1.7 | IpAddress | RW | |
scalar · IpAddress · read-write · current Define the default multicast IP address used in BFD multicast detection. Default: 224.0.0.184 | ||||
| ShwBfdEchoPassiveStatus | 1.3.6.1.4.1.2011.5.25.38.1.8 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current The passive Echo function of BFD. Options: 1. enabled(1) -denotes that the BFD EchoPassive capability is enabled 2. disabled(2) -denotes that the BFD EchoPassive capability is disabled Default: 2 | ||||
| ShwBfdEchoAclNum | 1.3.6.1.4.1.2011.5.25.38.1.9 | Unsigned32 (0 | 2000..2999) | RW | |
scalar · Unsigned32 (0 | 2000..2999) · read-write · current The Acl Number for passive Echo function of BFD. Default: 0 | ||||
| ShwBfdSessDynamicPingInterval | 1.3.6.1.4.1.2011.5.25.38.1.10 | Unsigned32 (30..600) | RW | |
scalar · Unsigned32 (30..600) · read-write · current Define the sending interval of the MPLS echo packet. Default: 60 Unit: second | ||||
| ShwBfdSessDynamicSupportPassive | 1.3.6.1.4.1.2011.5.25.38.1.11 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current The capability of automatically creating BFD sessions on the LSP egress. Options: 1. enabled(1) -denotes that the egress can create BFD sessions 2. disabled(2) -denotes that the egress cannot create BFD sessions Default: 2 | ||||
| ShwBfdSessDelayUpTime | 1.3.6.1.4.1.2011.5.25.38.1.12 | Unsigned32 (0..600) | RW | |
scalar · Unsigned32 (0..600) · read-write · current Define delay interval before the session turns to up. Unit: second Default: 0 | ||||
| ShwBfdSessMultiDstPort | 1.3.6.1.4.1.2011.5.25.38.1.13 | Integer32 (0 | 3784 | 4784) | RW | |
scalar · Integer32 (0 | 3784 | 4784) · read-write · current The destination UDP port of multi-hop BFD session. When the administrative status of BFD protocol is disabled, this value will be 0. Default: 3784 | ||||
| ShwBfdTrapSendInterval | 1.3.6.1.4.1.2011.5.25.38.1.14 | Integer32 (0 | 1..600) | RW | |
scalar · Integer32 (0 | 1..600) · read-write · current Define the sending interval of TRAP message. Unit: second Default: 120 | ||||
| ShwBfdLimitDeviceName | 1.3.6.1.4.1.2011.5.25.38.1.15 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The device name which session number reached up limit. | ||||
| ShwBfdDynamicSessionTos | 1.3.6.1.4.1.2011.5.25.38.1.16 | Unsigned32 (0..7) | RW | |
scalar · Unsigned32 (0..7) · read-write · current The Tos-Exp of dynamic session. Default: 7 | ||||
| ShwBfdStaticSessionTos | 1.3.6.1.4.1.2011.5.25.38.1.17 | Unsigned32 (0..7 | 255) | RW | |
scalar · Unsigned32 (0..7 | 255) · read-write · current The Tos-Exp of static session. Default: 7 | ||||
| ShwBfdDynamicSessionTosEx | 1.3.6.1.4.1.2011.5.25.38.1.18 | Unsigned32 (0..7 | 255) | RW | |
scalar · Unsigned32 (0..7 | 255) · read-write · current The extended Tos-Exp of dynamic session. Default: 7 | ||||
| ShwBfdSessCfgRemoteFailType | 1.3.6.1.4.1.2011.5.25.38.1.19 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current The virtual access AP notify process bfd session configuration failed. Options: 1. localDiscriminatorNonsupport(101) -indicates the local discriminator isnn't supported 2. localDiscriminatorConflict(102) -indicates the local discriminator is conflicted with another
| ||||
| ShwBfdBitErrorDetectSessLimitNumber | 1.3.6.1.4.1.2011.5.25.38.1.20 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current Define the maximum number of BFD bit-error-detection sessions allowed in the logic router. Default: 0 | ||||
| ShwBfdSessActNumber | 1.3.6.1.4.1.2011.5.25.38.1.21 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current Number of in-use BFD resources. Default: 0 | ||||
| NhwBfdObjects | 1.3.6.1.4.1.2011.5.25.38.2 | |||
| ThwBfdIfConfTable | 1.3.6.1.4.1.2011.5.25.38.2.1 | NA | ||
table · not-accessible · current The interface configuration table of BFD. | ||||
| RhwBfdIfConfEntry | 1.3.6.1.4.1.2011.5.25.38.2.1.1 | NA | ||
row · not-accessible · current The interface configuration table of BFD. The index of this entry is hwBfdIfConfIndex.
| ||||
| ChwBfdIfConfIndex | 1.3.6.1.4.1.2011.5.25.38.2.1.1.1 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current It is the configuration index of this interface. This index is automatically allocated inside the system and is not user-configurable. | ||||
| ChwBfdIfConfName | 1.3.6.1.4.1.2011.5.25.38.2.1.1.2 | OCTET STRING (SIZE (1..64)) | RC | |
column · OCTET STRING (SIZE (1..64)) · read-create · current It is the name of this Interface. | ||||
| ChwBfdIfConfEnable | 1.3.6.1.4.1.2011.5.25.38.2.1.1.3 | Integer32 (0..1) | RO | |
column · Integer32 (0..1) · read-only · current The flag whether the interface has enabled BFD. Options: 1. disable(0) -Indicates that the interface has disabled BFD 2. enable(1) -Indicates that the interface has enabled BFD | ||||
| ChwBfdIfConfDeleting | 1.3.6.1.4.1.2011.5.25.38.2.1.1.4 | Integer32 (0..1) | RO | |
column · Integer32 (0..1) · read-only · current The flag that whether the interface is in deleting. Options: 1. notDeleted(0) -the interface is not deleted 2. deleted(1) -the interface is deleted | ||||
| ChwBfdIfConfAvailable | 1.3.6.1.4.1.2011.5.25.38.2.1.1.5 | Integer32 (0..1) | RO | |
column · Integer32 (0..1) · read-only · current The flag that whether the interface is available. Options: 1. notAvailable(0) -the interface is not available 2. available(1) -the interface is available | ||||
| ChwBfdIfConfSessCnt | 1.3.6.1.4.1.2011.5.25.38.2.1.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The number of sessions that has been bound to this interface. | ||||
| ChwBfdIfConfRowStatus | 1.3.6.1.4.1.2011.5.25.38.2.1.1.7 | RowStatus | RC | |
column · RowStatus · read-create · current Used to manage the creation and deletion of conceptual rows. | ||||
| ThwBfdSessionConfTable | 1.3.6.1.4.1.2011.5.25.38.2.2 | NA | ||
table · not-accessible · current This table describes information about configuration entries of BFD sessions. | ||||
| RhwBfdSessionConfEntry | 1.3.6.1.4.1.2011.5.25.38.2.2.1 | NA | ||
row · not-accessible · current BFD Session Configuration Table. Use this table to get/configure BFD sessions. The index of this entry is hwBfdSessConfName.
| ||||
| ChwBfdSessConfName | 1.3.6.1.4.1.2011.5.25.38.2.2.1.1 | OCTET STRING (SIZE (1..64)) | NA | |
column · OCTET STRING (SIZE (1..64)) · not-accessible · current It is the name of this configuration model. | ||||
| ChwBfdSessConfMIndex | 1.3.6.1.4.1.2011.5.25.38.2.2.1.2 | Unsigned32 (1..4294967295) | RO | |
column · Unsigned32 (1..4294967295) · read-only · current It is the configuration index of this session. | ||||
| ChwBfdSessConfLocalDiscr | 1.3.6.1.4.1.2011.5.25.38.2.2.1.3 | Unsigned32 (0..4294967295) | RC | |
column · Unsigned32 (0..4294967295) · read-create · current Define the local discriminator of the BFD session. | ||||
| ChwBfdSessConfRemoteDiscr | 1.3.6.1.4.1.2011.5.25.38.2.2.1.4 | Unsigned32 (0..4294967295) | RC | |
column · Unsigned32 (0..4294967295) · read-create · current Define the remote discriminator of the BFD session. | ||||
| ChwBfdSessConfPeerAddr | 1.3.6.1.4.1.2011.5.25.38.2.2.1.5 | IpAddress | RC | |
column · IpAddress · read-create · current Define the IP address of the peer in the BFD session. | ||||
| ChwBfdSessConfBindIfIndex | 1.3.6.1.4.1.2011.5.25.38.2.2.1.6 | Unsigned32 (0..4294967295) | RO | |
column · Unsigned32 (0..4294967295) · read-only · current It is the index of the binding interface in the BFD configuration. | ||||
| ChwBfdSessConfBindIfName | 1.3.6.1.4.1.2011.5.25.38.2.2.1.7 | OCTET STRING (SIZE (1..64)) | RC | |
column · OCTET STRING (SIZE (1..64)) · read-create · current It is the name of the binding interface in the BFD configuration. | ||||
| ChwBfdSessConfDemandEnable | 1.3.6.1.4.1.2011.5.25.38.2.2.1.8 | Integer32 (0..1) | RC | |
column · Integer32 (0..1) · read-create · current It is the flag of the BFD demand mode. Options: 1. disabled(0) -disable the BFD demand mode 2. enabled(1) -enable the BFD demand mode | ||||
| ChwBfdSessConfDemandTimerInterval | 1.3.6.1.4.1.2011.5.25.38.2.2.1.9 | Unsigned32 (0 | 500..300000) | RC | |
column · Unsigned32 (0 | 500..300000) · read-create · current Define the detecting interval in the BFD session with the demand mode. Unit: millisecond | ||||
| ChwBfdSessConfDetectMult | 1.3.6.1.4.1.2011.5.25.38.2.2.1.10 | Unsigned32 (3..50) | RC | |
column · Unsigned32 (3..50) · read-create · current It is Detect time multiplier of the configuration. The negotiated transmit interval, multiplied by this value, provides the detection time for the transmitting system in Asynchronous mode. | ||||
| ChwBfdSessConfDesiredMinRxInterval | 1.3.6.1.4.1.2011.5.25.38.2.2.1.11 | BfdInterval (1..2147483647) | RC | |
column · BfdInterval (1..2147483647) · read-create · current This is the minimum interval of the configuration, in milliseconds, between received BFD Control packets that this system is capable of supporting. Unit: millisecond | ||||
| ChwBfdSessConfDesiredMinTxInterval | 1.3.6.1.4.1.2011.5.25.38.2.2.1.12 | BfdInterval (1..2147483647) | RC | |
column · BfdInterval (1..2147483647) · read-create · current This is the minimum interval of the configuration, in milliseconds, that the local system would like to use when transmitting BFD Control packets. Unit: millisecond | ||||
| ChwBfdSessConfWTRInterval | 1.3.6.1.4.1.2011.5.25.38.2.2.1.13 | Integer32 (0..60) | RC | |
column · Integer32 (0..60) · read-create · current The wait-to-restore (WTR) time of the BFD session. The event that indicates the session changing into the Up state is reported to the application program only after the WTR times out. Unit: minute | ||||
| ChwBfdSessConfTOS | 1.3.6.1.4.1.2011.5.25.38.2.2.1.14 | Integer32 (0..7) | RC | |
column · Integer32 (0..7) · read-create · current This is the TOS value of bfd packet. | ||||
| ChwBfdSessConfPSTFlag | 1.3.6.1.4.1.2011.5.25.38.2.2.1.15 | Integer32 (0..1) | RC | |
column · Integer32 (0..1) · read-create · current The PST flag of the BFD session configuration. It indicates the status association between the current BFD session and the interface bound to the session. Options: 1. disabled(0) -indicates that the PST capability of the BFD session is disabled 2. enabled(1) -indicates that the PST capability of the BFD session is enabled | ||||
| ChwBfdSessConfCommitFlag | 1.3.6.1.4.1.2011.5.25.38.2.2.1.16 | Integer32 (0..1) | RC | |
column · Integer32 (0..1) · read-create · current It is the commit flag of the configuration entry. Options: 1. notCommit(0) -not commit 2. commit(1) -commit | ||||
| ChwBfdSessConfAdminStatus | 1.3.6.1.4.1.2011.5.25.38.2.2.1.17 | Integer32 (0..1) | RC | |
column · Integer32 (0..1) · read-create · current A BFD session can be administratively enabled or disabled. The AdminStatus field indicates the BFD session status. Options: 1. 0 -disable 2. 1 -enable | ||||
| ChwBfdSessConfRowStatus | 1.3.6.1.4.1.2011.5.25.38.2.2.1.18 | RowStatus | RC | |
column · RowStatus · read-create · current Used to manage the creation and deletion of conceptual rows. | ||||
| ChwBfdSessConfSourceAddr | 1.3.6.1.4.1.2011.5.25.38.2.2.1.19 | IpAddress | RC | |
column · IpAddress · read-create · current Define the source IP address of the BFD session. | ||||
| ChwBfdSessConfVrfIndex | 1.3.6.1.4.1.2011.5.25.38.2.2.1.20 | Unsigned32 (0..4294967295) | RO | |
column · Unsigned32 (0..4294967295) · read-only · current The index of the VPN interface. | ||||
| ChwBfdSessConfVPNName | 1.3.6.1.4.1.2011.5.25.38.2.2.1.21 | OCTET STRING (SIZE (1..31)) | RC | |
column · OCTET STRING (SIZE (1..31)) · read-create · current The name of VPN interface. | ||||
| ChwBfdSessConfDefaultIp | 1.3.6.1.4.1.2011.5.25.38.2.2.1.22 | INTEGER | RC | |
column · INTEGER · read-create · current BFD session use default multicast IP as the detect peer-ip Options: 1. no(1) -do not use the default multicast IP 2. yes(2) -use the default multicast IP
| ||||
| ChwBfdSessConfPISFlag | 1.3.6.1.4.1.2011.5.25.38.2.2.1.23 | INTEGER | RC | |
column · INTEGER · read-create · current The state of BFD session is associated with the state of the binding interface Options: 1. false(1) -do not associate with interface state 2. true(2) -associate with interface state 3. subif(3) -associate with interface and correlative sub interface
| ||||
| ChwBfdSessConfBindType | 1.3.6.1.4.1.2011.5.25.38.2.2.1.24 | INTEGER | RC | |
column · INTEGER · read-create · current The binding type of the BFD session. Options: 1. interfaceIp(1) -BFD for IP with peer-ip and interface 2. peerIp(2) -BFD for IP only with peer-ip 3. sourceIp(3) -BFD for IP with peer-ip and source-ip 4. ifAndSourceIp(4) -BFD for IP with peer-ip, interface and source-ip 5. fec(5) -BFD for FEC(NOT support now) 6. tunnelIf(6) -BFD for Tunnel interface(NOT support now) 7. ospf(7) -BFD for OSPF 8. isis(8) -BFD for ISIS 9. ldpLsp(9) -BFD for LDP-LSP 10. staticLsp(10) -BFD for static LSP 11. teLsp(11) -BFD for TE-LSP 12. teTunnel(12) -BFD for TE-Tunnel 13. pw(13) -BFD for PW 14. vsiPw(15) -BFD for VSI PW 15. ldpTunnel(21) -BFD for LDP-Tunnel 16. bgpTunnel(22) -BFD for BGP-Tunnel
| ||||
| ChwBfdSessConfNextHop | 1.3.6.1.4.1.2011.5.25.38.2.2.1.25 | IpAddress | RC | |
column · IpAddress · read-create · current It is the next hop of the BFD session. | ||||
| ChwBfdSessConfStaticLspName | 1.3.6.1.4.1.2011.5.25.38.2.2.1.26 | OCTET STRING (SIZE (1..20)) | RC | |
column · OCTET STRING (SIZE (1..20)) · read-create · current It is the static LSP name of the BFD session. | ||||
| ChwBfdSessConfPWSecondaryFlag | 1.3.6.1.4.1.2011.5.25.38.2.2.1.27 | INTEGER | RC | |
column · INTEGER · read-create · current The role of the PW bound with BFD session. Options: 1. flagMasterPW(1) -master PW 2. flagSecondaryPW(2)-secondary PW 3. flagNoPW(3) -no PW
| ||||
| ChwBfdSessConfTunnelDetectType | 1.3.6.1.4.1.2011.5.25.38.2.2.1.28 | INTEGER | RC | |
column · INTEGER · read-create · current Set the failure notifies policy type. Options: 1. flagBothDown(1) -notify applications when detecting both Detect-Down and Neighbor-Down 2. flagNeighborDown(2) -notify applications only when detecting Neighbor-Down
| ||||
| ChwBfdSessConfVcId | 1.3.6.1.4.1.2011.5.25.38.2.2.1.29 | Unsigned32 (0..4294967295) | RC | |
column · Unsigned32 (0..4294967295) · read-create · current It is the ID of VC. | ||||
| ChwBfdSessConfVsiName | 1.3.6.1.4.1.2011.5.25.38.2.2.1.30 | OCTET STRING (SIZE (1..31)) | RC | |
column · OCTET STRING (SIZE (1..31)) · read-create · current It is the name of VSI. | ||||
| ChwBfdSessConfVsiPeerAddr | 1.3.6.1.4.1.2011.5.25.38.2.2.1.31 | IpAddress | RC | |
column · IpAddress · read-create · current It is the peer-ip of VSI. | ||||
| ChwBfdSessConfDiscrAuto | 1.3.6.1.4.1.2011.5.25.38.2.2.1.32 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current Describe whether the discriminator can be auto allocated. Options: 1. enabled(1) -the discriminator can be allocated automatically 2. disabled(2) -the discriminator cannot be allocated automatically | ||||
| ChwBfdSessConfPeerIpv6Addr | 1.3.6.1.4.1.2011.5.25.38.2.2.1.33 | Ipv6Address | RC | |
column · Ipv6Address · read-create · current Define the peer IPv6 address of the BFD session. | ||||
| ChwBfdSessConfSourceIpv6Addr | 1.3.6.1.4.1.2011.5.25.38.2.2.1.34 | Ipv6Address | RC | |
column · Ipv6Address · read-create · current Define the source IPv6 address of the BFD session. | ||||
| ChwBfdSessConfIpv6NextHop | 1.3.6.1.4.1.2011.5.25.38.2.2.1.35 | Ipv6Address | RO | |
column · Ipv6Address · read-only · current It is the next hop of the BFD session. | ||||
| ChwBfdSessConfIsIpv6Addr | 1.3.6.1.4.1.2011.5.25.38.2.2.1.36 | TruthValue | RC | |
column · TruthValue · read-create · current Whether the peer address of the BFD session is IPv6 address. | ||||
| ChwBfdSessConfKeychainName | 1.3.6.1.4.1.2011.5.25.38.2.2.1.37 | OCTET STRING (SIZE (1..47)) | RC | |
column · OCTET STRING (SIZE (1..47)) · read-create · current Specify the name of the keychain for authentication. | ||||
| ChwBfdSessConfMeticulous | 1.3.6.1.4.1.2011.5.25.38.2.2.1.38 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current Whether enable meticulous authentication for SHA-1 type. Options: 1. enabled(1) -enable meticulous authentication for SHA-1 type 2. disabled(2) -disabled meticulous authentication for SHA-1 type | ||||
| ChwBfdSessConfLooseAuthentication | 1.3.6.1.4.1.2011.5.25.38.2.2.1.39 | TruthValue | RC | |
column · TruthValue · read-create · current Whether loose authentication check. Options: 1.True(1) -loose-check 2.False(2) -do not loose-check | ||||
| ChwBfdSessConfOneArmEcho | 1.3.6.1.4.1.2011.5.25.38.2.2.1.40 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current The value of this object identifies whether a session works in one-arm-echo mode. Options: 1. enabled(1) -indicates that the session works in one-arm-echo mode 2. disabled(2) -indicates that the session does not work in one-arm-echo mode | ||||
| ChwBfdSessConfMinEchoRxInterval | 1.3.6.1.4.1.2011.5.25.38.2.2.1.41 | Unsigned32 (0 | 1..4294967295) | RC | |
column · Unsigned32 (0 | 1..4294967295) · read-create · current The value of this object identifies the minimum interval between received BFD Control packets, in milliseconds.This value reflects the capability of receiving BFD Control packets. Unit: millisecond | ||||
| ChwBfdSessConfPWTtlMode | 1.3.6.1.4.1.2011.5.25.38.2.2.1.42 | INTEGER | RC | |
column · INTEGER · read-create · current The value of this object identifies the configuration mode of a TTL used by the BFD session for PW. Options: 1. config(1) -indicates that the TTL is manually set 2. auto(2) -indicates that the TTL is automatically calculated based on an IP address 3. default(3)-indicates that the TTL is 255 by default 4. none(4) -indicates that the TTL is not in PW mode
| ||||
| ChwBfdSessConfPWTtl | 1.3.6.1.4.1.2011.5.25.38.2.2.1.43 | Integer32 (0..255) | RC | |
column · Integer32 (0..255) · read-create · current The value of this object identifies the TTL used by the BFD session for PW. The vlaue is configurable only when the configuration mode of a TTL is config. | ||||
| ChwBfdSessConfRemotePeerIpType | 1.3.6.1.4.1.2011.5.25.38.2.2.1.44 | InetAddressType | RC | |
column · InetAddressType · read-create · current The value of this object identifies the type of the destination address of the BFD session for PW. | ||||
| ChwBfdSessConfRemotePeerIp | 1.3.6.1.4.1.2011.5.25.38.2.2.1.45 | InetAddress | RC | |
column · InetAddress · read-create · current The value of this object identifies the destination IP address of the BFD session for PW. | ||||
| ChwBfdSessConfSelectBoard | 1.3.6.1.4.1.2011.5.25.38.2.2.1.46 | DisplayString (SIZE (1..47)) | RC | |
column · DisplayString (SIZE (1..47)) · read-create · current This object indicates the main processing board of a BFD session. | ||||
| ChwBfdSessConfPWSPE | 1.3.6.1.4.1.2011.5.25.38.2.2.1.47 | INTEGER | RC | |
column · INTEGER · read-create · current The value of this object identifies the node on which a BFD session is set up. The values are as follows. Options: 1. upe(1) -indicates that a BFD session is set up on a UPE to detect a PW 2. spe(2) -indicates that a BFD session is set up on an SPE to detect a PW 3. none(3) -indicates that a BFD session does not detect a PW Default: none
| ||||
| ChwBfdSessConfPWTrackIfName | 1.3.6.1.4.1.2011.5.25.38.2.2.1.48 | DisplayString (SIZE (1..64)) | RC | |
column · DisplayString (SIZE (1..64)) · read-create · current This object indicates the interface monitored by the BFD session for PW. | ||||
| ChwBfdSessConfIsPWTrackIf | 1.3.6.1.4.1.2011.5.25.38.2.2.1.49 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current The value of this object identifies whether the BFD session for PW monitors an interface. The values are as follows. Options: 1. enabled(1) -enables the BFD session for PW to monitor the interface 2. disabled(2)-disables the BFD session for PW from monitoring the interface | ||||
| ChwBfdSessConfEncapsulationType | 1.3.6.1.4.1.2011.5.25.38.2.2.1.50 | DisplayString (SIZE (1..63)) | RC | |
column · DisplayString (SIZE (1..63)) · read-create · current The value of this object identifies the VC encapsulation type on an SPE. The values are as follows: fr atm-aal5-sdu atm-trans-cell vlan ethernet hdlc ppp atm-nto1-vcc atm-nto1-vpc ip-layer2 atm-1to1-vcc atm-1to1-vpc atm-aal5-pdu satop-e1 satop-t1 esopsn-basic ip-interworking | ||||
| ChwBfdSessConfPEVid | 1.3.6.1.4.1.2011.5.25.38.2.2.1.51 | Unsigned32 (0..4094) | RC | |
column · Unsigned32 (0..4094) · read-create · current The value of this object identifies the outer tag of a sub-interface for QinQ VLAN tag termination or the VLAN ID of a sub-interface for dot1q VLAN tag termination. | ||||
| ChwBfdSessConfCEVid | 1.3.6.1.4.1.2011.5.25.38.2.2.1.52 | Unsigned32 (0..4094) | RC | |
column · Unsigned32 (0..4094) · read-create · current The value of this object identifies the inner tag in QinQ packets. | ||||
| ChwBfdSessConfTOSEx | 1.3.6.1.4.1.2011.5.25.38.2.2.1.53 | Integer32 (0..7 | 255) | RC | |
column · Integer32 (0..7 | 255) · read-create · current This is the extended TOS value of bfd packet. | ||||
| ChwBfdSessConfbImpactFlag | 1.3.6.1.4.1.2011.5.25.38.2.2.1.54 | INTEGER | RC | |
column · INTEGER · read-create · current BFD session impact interface when the device reboot Options: 1. no(1) -do not impact interface when the device reboot 2. yes(2) -impact interface when the device reboot
| ||||
| ThwBfdSessionTable | 1.3.6.1.4.1.2011.5.25.38.2.3 | NA | ||
table · not-accessible · current This table describes the query items of BFD sessions. | ||||
| RhwBfdSessionEntry | 1.3.6.1.4.1.2011.5.25.38.2.3.1 | NA | ||
row · not-accessible · current The BFD Session Table describes the BFD sessions. The index of this entry is hwBfdSessIndex.
| ||||
| ChwBfdSessIndex | 1.3.6.1.4.1.2011.5.25.38.2.3.1.1 | Unsigned32 (1..4294967295) | AN | |
column · Unsigned32 (1..4294967295) · accessible-for-notify · current It is unique and the Index of this session. This index is automatically allocated inside the system and is not user-configurable. | ||||
| ChwBfdSessMIndex | 1.3.6.1.4.1.2011.5.25.38.2.3.1.2 | Unsigned32 (1..4294967295) | RO | |
column · Unsigned32 (1..4294967295) · read-only · current This value indicate the configuration has Main Index. | ||||
| ChwBfdSessBindVRRP | 1.3.6.1.4.1.2011.5.25.38.2.3.1.3 | Integer32 (0..1) | RO | |
column · Integer32 (0..1) · read-only · current Describe the capability of bound with VRRP for the BFD session. Options: 1. notBind(0) -not bind 2. bind(1) -bind | ||||
| ChwBfdSessCfgName | 1.3.6.1.4.1.2011.5.25.38.2.3.1.4 | OCTET STRING (SIZE (1..64)) | RO | |
column · OCTET STRING (SIZE (1..64)) · read-only · current This object indicates the name of a BFD session. Currently, this object is used only as the VB binding variable for alarms. | ||||
| ChwBfdSessPeerAddr | 1.3.6.1.4.1.2011.5.25.38.2.3.1.5 | IpAddress | RO | |
column · IpAddress · read-only · current This object indicates the destination IP address of a BFD session. Currently, this object is used only as the VB binding variable of the alarm. | ||||
| ChwBfdSessBindIfIndex | 1.3.6.1.4.1.2011.5.25.38.2.3.1.6 | Integer32 (0..2147483647) | RO | |
column · Integer32 (0..2147483647) · read-only · current This object indicates the index of the interface bound to a BFD session. Currently, this object is used only as the VB binding variable for alarms. | ||||
| ChwBfdSessBindIfName | 1.3.6.1.4.1.2011.5.25.38.2.3.1.7 | OCTET STRING (SIZE (0..64)) | RO | |
column · OCTET STRING (SIZE (0..64)) · read-only · current This object indicates the name of the interface bound to a BFD session. Currently, this object is used only as the VB binding variable for alarms. | ||||
| ChwBfdSessLocalDiscr | 1.3.6.1.4.1.2011.5.25.38.2.3.1.8 | Unsigned32 (0..4294967295) | RO | |
column · Unsigned32 (0..4294967295) · read-only · current This object indicates the local descriptor of a BFD session. Currently, this object is used only as the VB binding variable for alarms. | ||||
| ChwBfdSessRemoteDiscr | 1.3.6.1.4.1.2011.5.25.38.2.3.1.9 | Unsigned32 (0..4294967295) | RO | |
column · Unsigned32 (0..4294967295) · read-only · current This object indicates the remote descriptor of a BFD session. Currently, this object is used only as the VB binding variable for alarms. | ||||
| ChwBfdSessOperMode | 1.3.6.1.4.1.2011.5.25.38.2.3.1.10 | Integer32 (0..6) | RO | |
column · Integer32 (0..6) · read-only · current Describe the current operating mode configured with the BFD session. Options: 1. 0 -asynchronous mode with echo function 2. 1 -asynchronous mode without echo function 3. 2 -demand mode with echo function 4. 3 -demand mode without echo function 5. 4 -asynchronous One-arm-echo mode 6. 5 -seamless BFD without echo function 7. 6 -asynchronous unaffiliated mode | ||||
| ChwBfdSessDetectMult | 1.3.6.1.4.1.2011.5.25.38.2.3.1.11 | Unsigned32 (3..50) | RO | |
column · Unsigned32 (3..50) · read-only · current Detect time multiplier. The negotiated transmit interval, multiplied by this value, provides the detection time for the transmitting system in Asynchronous mode. Default: 3 | ||||
| ChwBfdSessDemandTimerInterval | 1.3.6.1.4.1.2011.5.25.38.2.3.1.12 | BfdInterval | RO | |
column · BfdInterval · read-only · current It is the detecting interval in the BFD session with the demand mode. Unit: millisecond | ||||
| ChwBfdSessActualRxInterval | 1.3.6.1.4.1.2011.5.25.38.2.3.1.13 | BfdInterval | RO | |
column · BfdInterval · read-only · current This is the minimum interval, in milliseconds, between received BFD Control packets that this system is capable of supporting. Unit: millisecond | ||||
| ChwBfdSessActualTxInterval | 1.3.6.1.4.1.2011.5.25.38.2.3.1.14 | BfdInterval | RO | |
column · BfdInterval · read-only · current This is the minimum interval, in milliseconds, that the local system would like to use when transmitting BFD Control packets. Unit: millisecond | ||||
| ChwBfdSessWTRInterval | 1.3.6.1.4.1.2011.5.25.38.2.3.1.15 | Integer32 (0..60) | RO | |
column · Integer32 (0..60) · read-only · current The WTR interval of the BFD session. Unit: minute | ||||
| ChwBfdSessTOS | 1.3.6.1.4.1.2011.5.25.38.2.3.1.16 | Integer32 (0..7) | RO | |
column · Integer32 (0..7) · read-only · current This is the TOS value of bfd packet. | ||||
| ChwBfdSessState | 1.3.6.1.4.1.2011.5.25.38.2.3.1.17 | Integer32 (0..3) | RO | |
column · Integer32 (0..3) · read-only · current Describe the current state of the BFD session. Options: 1. 0 -admin down 2. 1 -down 3. 2 -init 4. 3 -up | ||||
| ChwBfdSessDiag | 1.3.6.1.4.1.2011.5.25.38.2.3.1.18 | Integer32 (0..31) | RO | |
column · Integer32 (0..31) · read-only · current A diagnostic code specifying the local system's reason for the last session state change. Options: 1. 0 -no diagnostic 2. 1 -control detection time expired 3. 2 -echo function failed 4. 3 -neighbor signaled session down 5. 4 -forwarding plane reset 6. 5 -path down 7. 6 -concatenated path down 8. 7 -administratively down 9. 8 -reverse concatenated path down 10. 9 -neighbor signaled session down (receive admindown) 11. 10-31 -reserved for future use | ||||
| ChwBfdSessSourceAddr | 1.3.6.1.4.1.2011.5.25.38.2.3.1.19 | IpAddress | RO | |
column · IpAddress · read-only · current The source address of the session. | ||||
| ChwBfdSessVrfIndex | 1.3.6.1.4.1.2011.5.25.38.2.3.1.20 | Unsigned32 (0..4294967295) | RO | |
column · Unsigned32 (0..4294967295) · read-only · current The index of the VPN interface. | ||||
| ChwBfdSessVPNName | 1.3.6.1.4.1.2011.5.25.38.2.3.1.21 | OCTET STRING (SIZE (1..31)) | RO | |
column · OCTET STRING (SIZE (1..31)) · read-only · current The name of VPN interface. | ||||
| ChwBfdSessType | 1.3.6.1.4.1.2011.5.25.38.2.3.1.22 | INTEGER | RO | |
column · INTEGER · read-only · current The type of the BFD session. Options: 1. static(1) -static 2. dynamic(2) -dynamic 3. entireDynamic(3) -entire dynamic 4. auto(4) -auto
| ||||
| ChwBfdSessBindAppType | 1.3.6.1.4.1.2011.5.25.38.2.3.1.23 | INTEGER | RO | |
column · INTEGER · read-only · current The Application type that this BFD session has been bound to Options: 1. noApplication(1) -No application 2. vrrp(2) -VRRP 3. ifnet(3) -IFNET 4. vrrpAndIfnet(4) -VRRP&IFNET 5. bgp(5) -BGP 6. ospf(6) -OSPF 7. bgpAndOspf(7) -BGP&OSPF 8. oamLspmL2vpn(8) -OAM&LSPM&L2VPN (for LDP LSP and static LSP) 9. oamTnlL2vpn(9) -OAM&TUNNEL&L2VPN (for TE_Tunnnel) 10. lspmL2vpnTnlps(10) -LSPM&TUNNEL_PS&L2VPN (for TE_LSP) 11. oamMplsfwL2vpn(11) -OAM&MPLSFW&L2VPN (for PW) 12. isis(12) -ISIS 13. vsiPw(13) -VSIPW (for VSI PW) 14. vrrpOamLspmL2vpn(14) -VRRP&OAM&LSPM&L2VPN 15. vrrpOamTnlL2vpn(15) -VRRP&OAM&TUNNEL&L2VPN 16. vrrpLspmL2vpnTnlps(16) -VRRP&LSPM&TUNNEL_PS&L2VPN 17. vrrpOamMplsfwL2vpn(17) -VRRP&OAM&MPLSFW&L2VPN 18. pim(18) -PIM 19. bgpIsis(19) -BGP&ISIS 20. bgpPim(20) -BGP&PIM 21. ospfIsis(21) -OSPF&ISIS 22. ospfPim(22) -OSPF&PIM 23. isisPim(23) -ISIS&PIM 24. bgpOspfIsis(24) -BGP&OSPF&ISIS 25. bgpOspfPim(25) -BGP&OSPF&PIM 26. bgpIsisPim(26) -BGP&ISIS&PIM 27. ospfIsisPim(27) -OSPF&ISIS&PIM 28. bgpOspfIsisPim(28) -BGPOSPF&ISIS&PIM 29. bgp6(29) -BGP6 30. ospfv3(30) -OSPFV3 31. isis6(31) -ISIS6 32. pim6(32) -PIM6 33. bgp6Ospfv3(33) -BGP6&OSPFV3 34. bgp6Isis6(34) -BGP6&ISIS6 35. bgp6Pim6(35) -BGP6&PIM6 36. ospfv3Isis6(36) -OSPFV3&ISIS6 37. ospfv3Pim6(37) -OSPFV3&PIM6 38. isis6Pim6(38) -ISIS6&PIM6 39. bgp6Ospfv3Isis6(39) -BGP6&OSPFV3&ISIS6 40. bgp6Ospfv3Pim6(40) -BGP6&OSPFV3&PIM6 41. bgp6Isis6Pim6(41) -BGP6&ISIS6&PIM6 42. ospfv3Isis6Pim6(42) -OSPFV3&ISIS6&PIM6 43. bgp6Ospfv3Isis6Pim6(43) -BGP6&OSPFV3&ISIS6&PIM6 44. auto(44) -AUTO 45. autoIsis(45) -AUTO&ISIS 46. autoOspf(46) -AUTO&OSPF 47. autoBgp(47) -AUTO&BGP 48. autoPim(48) -AUTO&PIM 49. autoIsisOspf(49) -AUTO&ISIS&OSPF 50. autoIsisBgp(50) -AUTO&ISIS&BGP 51. autoIsisPim(51) -AUTO&ISIS&PIM 52. autoOspfBgp(52) -AUTO&OSPF&BGP 53. autoOspfPim(53) -AUTO&OSPF&PIM 54. autoBgpPim(54) -AUTO&BGP&PIM 55. autoIsisOspfBgp(55) -AUTO&ISIS&OSPF&BGP 56. autoIsisOspfBgpPim(56) -AUTO&ISIS&OSPF&BGP&PIM 57. autoIsis6(57) -AUTO&ISIS6 58. autoOspfv3(58) -AUTO&OSPFV3 59. autoBgp6(59) -AUTO&BGP6 60. autoPim6(60) -AUTO&PIM6 61. autoIsis6Ospfv3(61) -AUTO&ISIS6&OSPFV3 62. autoIsis6Bgp6(62) -AUTO&ISIS6&BGP6 63. autoIsis6Pim6(63) -AUTO&ISIS6&PIM6 64. autoOspfv3Bgp6(64) -AUTO&OSPFV3&BGP6) 65. autoOspfv3Pim6(65) -AUTO&OSPFV3&PIM6) 66. autoBgp6Pim6(66) -AUTO&BGP6&PIM6 67. autoIsis6Ospfv3Bgp6(67) -AUTO&ISIS6&OSPFV3&BGP6 68. autoIsis6Ospfv3Bgp6Pim6(68) -AUTO&ISIS6&OSPFV3&BGP6&PIM6 69. etrunk(69) -ETRUNK 70. etrunkIfnet(70) -ETRUNK&IFNET 71. etrunkVrrp(71) -ETRUNK&VRRP 72. etrunkVrrpIfnet(72) -ETRUNK&VRRP&IFNET 73. etrunkOamLspmL2vpn(73) -ETRUNK&OAM&LSPM&L2VPN 74. etrunkOamTnlL2vpn(74) -ETRUNK&OAM&TNL&L2VPN 75. etrunkLspmL2vpnTnlps(75) -ETRUNK&LSPM&L2VPN&TNLPS 76. etrunkOamMplsfwL2vpn(76) -ETRUNK&OAM&MPLSFW&L2VPN 77. etrunkvsiPw(77) -ETRUNK&VSIPW 78. etrunkOamLspmL2vpnVrrp(78) -ETRUNK&OAM&LSPM&L2VPN&VRRP 79. etrunkOamTnlL2vpnVrrp(79) -ETRUNK&OAM&TNL&L2VPN&VRRP 80. etrunkLspmL2vpnTnlpsVrrp(80) -ETRUNK&LSMP&L2VPN&TNLPS&VRRP 81. etrunkOamMplsfwL2vpnVrrp(81) -ETRUNK&OAM&MPLSFW&L2VPN&VRRP 82. rip(82) -RIP 83. bgpRip(83) -BGP&RIP 84. ospfRip(84) -OSPF&RIP 85. isisRip(85) -ISIS&RIP 86. pimRip(86) -PIM&RIP 87. bgpOspfRip(87) -BGP&OSPF&RIP 88. bgpIsisRip(88) -BGP&ISIS&RIP 89. bgpPimRip(89) -BGP&PIM&RIP 90. ospfIsisRip(90) -OSPF&ISIS&RIP 91. ospfPimRip(91) -OSPF&PIM&RIP 92. isisPimRip(92) -ISIS&PIM&RIP 93. bgpOspfIsisRip(93) -BGP&OSPF&ISIS&RIP 94. bgpOspfPimRip(94) -BGP&OSPF&PIM&RIP 95. ospfIsisPimRip(95) -OSPF&ISIS&PIM&RIP 96. autoRip(96) -AUTO&RIP 97. autoBgpRip(97) -AUTO&BGP&RIP 98. autoOspfRip(98) -AUTO&OSPF&RIP 99. autoIsisRip(99) -AUTO&ISIS&RIP 100. autoPimRip(100) -AUTO&PIM&RIP 101. autoBgpOspfRip(101) -AUTO&BGP&OSPF&RIP 102. autoBgpIsisRip(102) -AUTO&BGP&ISIS&RIP 103. autoBgpPimRip(103) -AUTO&BGP&PIM&RIP 104. autoOspfIsisRip(104) -AUTO&OSPF&ISIS&RIP 105. autoOspfPimRip(105) -AUTO&OSPF&PIM&RIP 106. autoIsisPimRip(106) -AUTO&ISIS&PIM&RIP 107. autoBgpOspfIsisRip(107) -AUTO&BGP&OSPF&ISIS&RIP 108. autoBgpOspfPimRip(108) -AUTO&BGP&OSPF&PIM&RIP 109. autoOspfIsisPimRip(109) -AUTO&OSPF&ISIS&PIM&RIP 110. autoIsisOspfBgpPimVrrp(110) -AUTO&ISIS&OSPF&BGP&PIM&VRRP 111. autoIsisOspfPimVrrp(111) -AUTO&ISIS&OSPF&PIM&VRRP 112. autoIsisOspfBgpVrrp(112) -AUTO&ISIS&OSPF&BGP&VRRP 113. autoIsisBgpPimVrrp(113) -AUTO&ISIS&BGP&PIM&VRRP 114. autoOspfBgpPimVrrp(114) -AUTO&OSPF&BGP&PIM&VRRP 115. autoIsisOspfVrrp(115) -AUTO&ISIS&OSPF&VRRP 116. autoIsisBgpVrrp(116) -AUTO&ISIS&BGP&VRRP 117. autoOspfBgpVrrp(117) -AUTO&OSPF&BGP&VRRP 118. autoIsisPimVrrp(118) -AUTO&ISIS&PIM&VRRP 119. autoOspfPimVrrp(119) -AUTO&OSPF&PIM&VRRP 120. autoBgpPimVrrp(120) -AUTO&BGP&PIM&VRRP 121. autoIsisVrrp(121) -AUTO&ISIS&VRRP 122. autoOspfVrrp(122) -AUTO&OSPF&VRRP 123. autoBgpVrrp(123) -AUTO&BGP&VRRP 124. autoPimVrrp(124) -AUTO&PIM&VRRP 125. autoVrrp(125) -AUTO&VRRP 126. autoVrrpBgp6(126) -AUTO&VRRP&BGP6 127. autoOspfv3Isis6Pim6(127) -AUTO&OSPFV3&ISIS6&PIM6 128. autoOspfBgpPim(128) -AUTO&OSPF&BGP&PIM 129. autoIsisOspfPim(129) -AUTO&ISIS&OSPF&PIM 130. autoIsisPimBgp(130) -AUTO&ISIS&BGP&PIM 131. bgpOspfIsisPimRip(131) -BGP&OSPF&ISIS&PIM&RIP 132. autoBgpOspfIsisPimRip(132) -AUTO&BGP&OSPF&ISIS&PIM&RIP 133. bgpRsvp(133) -BGP&RSVP 134. ospfRsvp(134) -OSPF&RSVP 135. isisRsvp(135) -ISIS&RSVP 136. pimRsvp(136) -PIM&RSVP 137. ripRsvp(137) -RIP&RSVP 138. bgpOspfRsvp(138) -BGP&OSPF&RSVP 139. bgpIsisRsvp(139) -BGP&ISIS&RSVP 140. bgpPimRsvp(140) -BGP&PIM&RSVP 141. bgpRipRsvp(141) -BGP&RIP&RSVP 142. ospfIsisRsvp(142) -OSPF&ISIS&RSVP 143. ospfPimRsvp(143) -OSPF&PIM&RSVP 144. ospfRipRsvp(144) -OSPF&RIP&RSVP 145. isisPimRsvp(145) -ISIS&PIM&RSVP 146. isisRipRsvp(146) -ISIS&RIP&RSVP 147. pimRipRsvp(147) -PIM&RIP&RSVP 148. bgpOspfIsisRsvp(148) -BGP&OSPF&ISIS&RSVP 149. bgpOspfPimRsvp(149) -BGP&OSPF&PIM&RSVP 150. bgpOspfRipRsvp(150) -BGP&OSPF&RIP&RSVP 151. bgpIsisPimRsvp(151) -BGP&ISIS&PIM&RSVP 152. bgpIsisRipRsvp(152) -BGP&ISIS&RIP&RSVP 153. bgpPimRipRsvp(153) -BGP&PIM&RIP&RSVP 154. ospfIsisPimRsvp(154) -OSPF&ISIS&PIM&RSVP 155. ospfIsisRipRsvp(155) -OSPF&ISIS&RIP&RSVP 156. isisPimRipRsvp(156) -ISIS&PIM&RIP&RSVP 157. bgpOspfIsisPimRsvp(157) -BGP&OSPF&ISIS&PIM&RSVP 158. bgpOspfIsisRipRSvp(158) -BGP&OSPF&ISIS&RIP&RSVP 159. bgpOspfPimRipRsvp(159) -BGP&OSPF&PIM&RIP&RSVP 160. bgpIsisPimRipRsvp(160) -BGP&ISIS&PIM&RIP&RSVP 161. ospfIsisPimRipRsvp(161) -OSPF&ISIS&PIM&RIP&RSVP 162. bgpOspfIsisPimRipRsvp(162) -BGP&OSPF&ISIS&PIM&RIP&RSVP 163. autoRsvp(163) -AUTO&RSVP 164. autoBgpRsvp(164) -AUTO&BGP&RSVP 165. autoOspfRsvp(165) -AUTO&OSPF&RSVP 166. autoIsisRsvp(166) -AUTO&ISIS&RSVP 167. autoPimRsvp(167) -AUTO&PIM&RSVP 168. autoRipRsvp(168) -AUTO&RIP&RSVP 169. autoBgpOspfRsvp(169) -AUTO&BGP&OSPF&RSVP 170. autoBgpIsisRsvp(170) -AUTO&BGP&ISIS&RSVP 171. autoBgpPimRsvp(171) -AUTO&BGP&PIM&RSVP 172. autoBgpRipRsvp(172) -AUTO&BGP&RIP&RSVP 173. autoOspfIsisRsvp(173) -AUTO&OSPF&ISIS&RSVP 174. autoOspfPimRsvp(174) -AUTO&OSPF&PIM&RSVP 175. autoOspfRipRsvp(175) -AUTO&OSPF&RIP&RSVP 176. autoIsisPimRsvp(176) -AUTO&ISIS&PIM&RSVP 177. autoIsisRipRsvp(177) -AUTO&ISIS&RIP&RSVP 178. autoPimRipRsvp(178) -AUTO&PIM&RIP&RAVP 179. autoBgpOspfIsisRsvp(179) -AUTO&BGP&OSPF&ISIS&RSVP 180. autoBgpOspfPimRsvp(180) -AUTO&BGP&OSPF&PIM&RSVP 181. autoBgpOspfRipRsvp(181) -AUTO&BGP&OSPF&RIP&RSVP 182. autoOspfIsisPimRsvp(182) -AUTO&OSPF&ISIS&PIM&RSVP 183. autoOspfIsisRipRsvp(183) -AUTO&OSPF&ISIS&RIP&RSVP 184. autoIsisPimRipRsvp(184) -AUTO&ISIS&PIM&RIP&RSVP 185. autoBgpOspfIsisPimRsvp(185) -AUTO&BGP&OSPF&ISIS&PIM&RSVP 186. autoBgpOspfIsisRipRsvp(186) -AUTO&BGP&OSPF&ISIS&RIP&RSVP 187. autoOspfIsisPimRipRsvp(187) -AUTO&OSPF&ISIS&PIM&RIP&RSVP 188. rsvp(188) -RSVP
| ||||
| ChwBfdSessDefaultIp | 1.3.6.1.4.1.2011.5.25.38.2.3.1.24 | INTEGER | RO | |
column · INTEGER · read-only · current BFD session use default multicast IP as the detect peer-ip Options: 1. no(1) -do not use the default multicast IP 2. yes(2) -use the default multicast IP
| ||||
| ChwBfdSessPISFlag | 1.3.6.1.4.1.2011.5.25.38.2.3.1.25 | INTEGER | RO | |
column · INTEGER · read-only · current The state of BFD session is associated with the state of the binding interface Options: 1. false(1) -do not associate with interface state 2. true(2) -associate with interface state 3. subif(3) -associate with interface and correlative sub interface
| ||||
| ChwBfdSessBindType | 1.3.6.1.4.1.2011.5.25.38.2.3.1.26 | INTEGER | RO | |
column · INTEGER · read-only · current The binding type of the BFD session. Options: 1. interfaceIp(1) -BFD for IP with peer-ip and interface 2. peerIp(2) -BFD for IP only with peer-ip 3. sourceIp(3) -BFD for IP with peer-ip and source-ip 4. ifAndSourceIp(4) -BFD for IP with peer-ip, interface and source-ip 5. fec(5) -BFD for FEC(NOT support now) 6. tunnelIf(6) -BFD for Tunnel interface(NOT support now) 7. ospf(7) -BFD for OSPF 8. isis(8) -BFD for ISIS 9. ldpLsp(9) -BFD for LDP-LSP 10. staticLsp(10) -BFD for static LSP 11. teLsp(11) -BFD for TE-LSP 12. teTunnel(12) -BFD for TE-Tunnel 13. pw(13) -BFD for PW; 14. vsiPw(15) -BFD for VSI PW 15. ldpTunnel(21) -BFD for LDP-Tunnel 16. bgpTunnel(22) -BFD for BGP-Tunnel 17. vxlan(23) -BFD for VXLAN 18. evpl(24) -BFD for EVPN-VPWS
| ||||
| ChwBfdSessNextHop | 1.3.6.1.4.1.2011.5.25.38.2.3.1.27 | IpAddress | RO | |
column · IpAddress · read-only · current It is the next hop of the BFD session. | ||||
| ChwBfdSessStaticLspName | 1.3.6.1.4.1.2011.5.25.38.2.3.1.28 | OCTET STRING (SIZE (0..20)) | RO | |
column · OCTET STRING (SIZE (0..20)) · read-only · current It is the static LSP name of the BFD session. | ||||
| ChwBfdSessLspIndex | 1.3.6.1.4.1.2011.5.25.38.2.3.1.29 | Unsigned32 (0..4294967295) | RO | |
column · Unsigned32 (0..4294967295) · read-only · current It is the index of the static LSP or LDP LSP in BFD session, mapping the channel index in MPLS network. | ||||
| ChwBfdSessPWSecondaryFlag | 1.3.6.1.4.1.2011.5.25.38.2.3.1.30 | INTEGER | RO | |
column · INTEGER · read-only · current The role of the PW bound with BFD session. Options: 1. flagMasterPW(1) -master PW 2. flagSecondaryPW(2) -secondary PW 3. flagNoPW(3) -no PW Default: 1
| ||||
| ChwBfdSessTunnelDetectType | 1.3.6.1.4.1.2011.5.25.38.2.3.1.31 | INTEGER | RO | |
column · INTEGER · read-only · current Set the failure notifies policy type. Options: 1. flagBothDown(1) -notify applications when detecting both Detect-Down and Neighbor-Down 2. flagNeighborDown(2) -notify applications only when detecting Neighbor-Down Default: 1
| ||||
| ChwBfdSessVcId | 1.3.6.1.4.1.2011.5.25.38.2.3.1.32 | Unsigned32 (0..4294967295) | RO | |
column · Unsigned32 (0..4294967295) · read-only · current It is the ID of VC. | ||||
| ChwBfdSessVsiName | 1.3.6.1.4.1.2011.5.25.38.2.3.1.33 | OCTET STRING (SIZE (0..31)) | RO | |
column · OCTET STRING (SIZE (0..31)) · read-only · current It is the name of VSI. | ||||
| ChwBfdSessVsiPeerAddr | 1.3.6.1.4.1.2011.5.25.38.2.3.1.34 | IpAddress | RO | |
column · IpAddress · read-only · current It is the peer-ip of VSI. | ||||
| ChwBfdSessDiscrAuto | 1.3.6.1.4.1.2011.5.25.38.2.3.1.35 | EnabledStatus | RO | |
column · EnabledStatus · read-only · current Describe whether the discriminator can be auto allocated. Options: 1. enabled(1) -the discriminator can be allocated automatically 2. disabled(2) -the discriminator cannot be allocated automatically Default: disabled | ||||
| ChwBfdSessPeerIpv6Addr | 1.3.6.1.4.1.2011.5.25.38.2.3.1.36 | Ipv6Address | RO | |
column · Ipv6Address · read-only · current Define the peer IPv6 address of the BFD session. | ||||
| ChwBfdSessSourceIpv6Addr | 1.3.6.1.4.1.2011.5.25.38.2.3.1.37 | Ipv6Address | RO | |
column · Ipv6Address · read-only · current Define the source IPv6 address of the BFD session. | ||||
| ChwBfdSessIpv6NextHop | 1.3.6.1.4.1.2011.5.25.38.2.3.1.38 | Ipv6Address | RO | |
column · Ipv6Address · read-only · current It is the next hop of the BFD session. | ||||
| ChwBfdSessIsIPv6Addr | 1.3.6.1.4.1.2011.5.25.38.2.3.1.39 | TruthValue | RO | |
column · TruthValue · read-only · current Whether the peer address of the BFD session is IPv6 address. Default: false | ||||
| ChwBfdSessMeticulous | 1.3.6.1.4.1.2011.5.25.38.2.3.1.40 | EnabledStatus | RO | |
column · EnabledStatus · read-only · current Whether enable meticulous authentication for SHA-1 type. Options: 1. enabled(1) -enable meticulous authentication for SHA-1 type 2. disabled(2) -disabled meticulous authentication for SHA-1 type Default: 2 | ||||
| ChwBfdSessLooseAuthentication | 1.3.6.1.4.1.2011.5.25.38.2.3.1.41 | TruthValue | RO | |
column · TruthValue · read-only · current Whether loose authentication check. Options: 1. True(1) -loose-check 2. False(2) -do not loose-check Default: false | ||||
| ChwBfdSessAuthenticationStatus | 1.3.6.1.4.1.2011.5.25.38.2.3.1.42 | Integer32 | RO | |
column · Integer32 · read-only · current Authentication status of the bfd session Options: 1. 0 -authentication disable 2. 1 -interface board do not support bfd authentication 3. 2 -keychain does not exist 4. 3 -auth BFD session number exceed 5. 4 -authentication in operation normally 100. 100 -exception Default: 0 | ||||
| ChwBfdSessOneArmEcho | 1.3.6.1.4.1.2011.5.25.38.2.3.1.43 | EnabledStatus | RO | |
column · EnabledStatus · read-only · current The value of this object identifies whether a session works in one-arm-echo mode. Options: 1. enabled(1) -indicates that the session works in one-arm-echo mode 2. disabled(2) -indicates that the session does not work in one-arm-echo mode Default: disabled | ||||
| ChwBfdSessPWTtlMode | 1.3.6.1.4.1.2011.5.25.38.2.3.1.44 | INTEGER | RO | |
column · INTEGER · read-only · current The value of this object identifies the configuration mode of a TTL used by the BFD session for PW. Options: 1. config(1) -indicates that the TTL is manually set 2. auto(2) -indicates that the TTL is automatically calculated based on an IP address 3. default(3) -indicates that the TTL is 255 by default 4. nottl(4) -indicates that the TTL is not in PW mode
| ||||
| ChwBfdSessPWTtl | 1.3.6.1.4.1.2011.5.25.38.2.3.1.45 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current The value of this object identifies the TTL used by the BFD session for PW. | ||||
| ChwBfdSessRemotePeerIpType | 1.3.6.1.4.1.2011.5.25.38.2.3.1.46 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of this object identifies the type of the destination address of the BFD session for PW. | ||||
| ChwBfdSessRemotePeerIp | 1.3.6.1.4.1.2011.5.25.38.2.3.1.47 | InetAddress | RO | |
column · InetAddress · read-only · current The value of this object identifies the destination IP address of the BFD session for PW. | ||||
| ChwBfdSessSelectBoard | 1.3.6.1.4.1.2011.5.25.38.2.3.1.48 | DisplayString (SIZE (1..47)) | RO | |
column · DisplayString (SIZE (1..47)) · read-only · current This object indicates the main processing board of a BFD session. | ||||
| ChwBfdSessPWSPE | 1.3.6.1.4.1.2011.5.25.38.2.3.1.49 | INTEGER | RO | |
column · INTEGER · read-only · current The value of this object identifies the node on which a BFD session is set up. The values are as follows. Options: 1. upe(1) -indicates that a BFD session is set up on a UPE to detect a PW 2. spe(2) -indicates that a BFD session is set up on an SPE to detect a PW 3. none(3) -indicates that a BFD session does not detect a PW Default: none
| ||||
| ChwBfdSessPWTrackIfName | 1.3.6.1.4.1.2011.5.25.38.2.3.1.50 | DisplayString (SIZE (1..64)) | RO | |
column · DisplayString (SIZE (1..64)) · read-only · current This object indicates the interface monitored by the BFD session for PW. | ||||
| ChwBfdSessIsPWTrackIf | 1.3.6.1.4.1.2011.5.25.38.2.3.1.51 | EnabledStatus | RO | |
column · EnabledStatus · read-only · current The value of this object identifies whether the BFD session for PW monitors an interface. The values are as follows. Options: 1. enabled(1) -enables the BFD session for PW to monitor the interface 2. disabled(2) -disables the BFD session for PW from monitoring the interface | ||||
| ChwBfdSessEncapsulationType | 1.3.6.1.4.1.2011.5.25.38.2.3.1.52 | DisplayString (SIZE (1..63)) | RO | |
column · DisplayString (SIZE (1..63)) · read-only · current The value of this object identifies the VC encapsulation type on an SPE. The values are as follows: fr atm-aal5-sdu atm-trans-cell vlan ethernet hdlc ppp atm-nto1-vcc atm-nto1-vpc ip-layer2 atm-1to1-vcc atm-1to1-vpc atm-aal5-pdu satop-e1 satop-t1 esopsn-basic ip-interworking | ||||
| ChwBfdSessPEVid | 1.3.6.1.4.1.2011.5.25.38.2.3.1.53 | Unsigned32 (0..4094) | RO | |
column · Unsigned32 (0..4094) · read-only · current The value of this object identifies the outer tag of a sub-interface for QinQ VLAN tag termination or the VLAN ID of a sub-interface for dot1q VLAN tag termination. | ||||
| ChwBfdSessCEVid | 1.3.6.1.4.1.2011.5.25.38.2.3.1.54 | Unsigned32 (0..4094) | RO | |
column · Unsigned32 (0..4094) · read-only · current The value of this object identifies the inner tag in QinQ packets. | ||||
| ChwBfdSessPeerInetAddrType | 1.3.6.1.4.1.2011.5.25.38.2.3.1.55 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of this object identifies the type of the destination address of the BFD session. | ||||
| ChwBfdSessPeerInetAddr | 1.3.6.1.4.1.2011.5.25.38.2.3.1.56 | InetAddress | RO | |
column · InetAddress · read-only · current The value of this object identifies the destination IP address of the BFD session. | ||||
| ChwBfdSessInetNextHopType | 1.3.6.1.4.1.2011.5.25.38.2.3.1.57 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of this object identifies the type of the next hop of the BFD session. | ||||
| ChwBfdSessInetNextHop | 1.3.6.1.4.1.2011.5.25.38.2.3.1.58 | InetAddress | RO | |
column · InetAddress · read-only · current The value of this object identifies the next hop of the BFD session. | ||||
| ChwBfdSessBindAppTypeMask | 1.3.6.1.4.1.2011.5.25.38.2.3.1.59 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current A value which indicates the set of applications that this BFD session binds. Every bit indicates a application. The corresponding bit and applications are as follows: bit application 0 IFNET 1 Route-Management 2 OSPF 3 ISISL1 4 ISISL2 5 PIM 6 ISISL1L2 7 BGP 8 VRRP 9 LSPM 10 RSVP 11 LDP 12 TE 13 Product Private APP 14 L2VPN 15 OAM_MANAGER 16 VTE 17 VPW 18 MPLSFW 19 VGMP 20 LSPV 21 VSI_PW 22 ETHOAM 23 AUTO 24 E-TRUNK 25 OSPFv3 26 ISISL1_6 27 ISISL2_6 28 PIM6 29 ISISL1L2_6 30 BGP6 31 RM6 32 RBS 33 RIP 34 FRP 35 BGPLSP 36 STATICRTV6 37 STATICRT 38 VRRP6 39 PIMV6 40 ADM 41 BFD 42 GFD 43 SOCK 44 FES 45 DGNTL 46 BR_V5ADA 47 VSM 48 SEGR 49 LABELV4 | ||||
| ChwBfdSessDscp | 1.3.6.1.4.1.2011.5.25.38.2.3.1.60 | Integer32 (0..63 | 255) | RO | |
column · Integer32 (0..63 | 255) · read-only · current This is the dscp value of bfd packet. 255 is invalid value. | ||||
| ChwBfdSessPWId | 1.3.6.1.4.1.2011.5.25.38.2.3.1.61 | Unsigned32 (0..4294967295) | RO | |
column · Unsigned32 (0..4294967295) · read-only · current It is the ID of PW. | ||||
| ChwBfdSessDescription | 1.3.6.1.4.1.2011.5.25.38.2.3.1.62 | DisplayString (SIZE (1..64)) | RO | |
column · DisplayString (SIZE (1..64)) · read-only · current Description about a BFD session. | ||||
| ChwBfdSessFeNodeID | 1.3.6.1.4.1.2011.5.25.38.2.3.1.63 | Unsigned32 (0..4294967295) | RO | |
column · Unsigned32 (0..4294967295) · read-only · current ID of the board where the session resides. | ||||
| ChwBfdSessLinkType | 1.3.6.1.4.1.2011.5.25.38.2.3.1.64 | DisplayString (SIZE (1..31)) | RO | |
column · DisplayString (SIZE (1..31)) · read-only · current Session type. | ||||
| ChwBfdSessTunnelName | 1.3.6.1.4.1.2011.5.25.38.2.3.1.65 | DisplayString (SIZE (1..64)) | RO | |
column · DisplayString (SIZE (1..64)) · read-only · current Tunnel name. | ||||
| ChwBfdSessDownReason | 1.3.6.1.4.1.2011.5.25.38.2.3.1.66 | DisplayString (SIZE (1..63)) | RO | |
column · DisplayString (SIZE (1..63)) · read-only · current Reason why the session goes down. | ||||
| ChwBfdSessEvplId | 1.3.6.1.4.1.2011.5.25.38.2.3.1.67 | Unsigned32 (0..4294967295) | RO | |
column · Unsigned32 (0..4294967295) · read-only · current It is the ID of EVPL instance. | ||||
| ThwBfdSessionPerTable | 1.3.6.1.4.1.2011.5.25.38.2.4 | NA | ||
table · not-accessible · current This table specifies BFD Session performance counters. | ||||
| RhwBfdSessionPerEntry | 1.3.6.1.4.1.2011.5.25.38.2.4.1 | NA | ||
row · not-accessible · current This table specifies BFD Session performance counters. The index of this entry is hwBfdSessPerIndex.
| ||||
| ChwBfdSessPerIndex | 1.3.6.1.4.1.2011.5.25.38.2.4.1.1 | Unsigned32 (1..2147483647) | NA | |
column · Unsigned32 (1..2147483647) · not-accessible · current The index of BFD session statistics. This index is automatically allocated inside the system and is not user-configurable. | ||||
| ChwBfdSessPerfPktIn | 1.3.6.1.4.1.2011.5.25.38.2.4.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The statistical information of the received Octets in local system in this session.The total received packet number. | ||||
| ChwBfdSessPerfPktInHC | 1.3.6.1.4.1.2011.5.25.38.2.4.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The statistical information of the received Octets in local system in this session.The high 4 bytes of total received packet number. | ||||
| ChwBfdSessPerfPktOut | 1.3.6.1.4.1.2011.5.25.38.2.4.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The statistical information of the send Packets in local system in this session. | ||||
| ChwBfdSessPerfPktOutHC | 1.3.6.1.4.1.2011.5.25.38.2.4.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The statistical information of the send Packets in local system in this session.The high 4 bytes of total send packet number. | ||||
| ChwBfdSessPerfBadIn | 1.3.6.1.4.1.2011.5.25.38.2.4.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The statistical information of the received Errors in local system in this session. | ||||
| ChwBfdSessPerfBadInHC | 1.3.6.1.4.1.2011.5.25.38.2.4.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The statistical information of the received Errors in local system in this session.The high 4 bytes of total received wrong packet number. | ||||
| ChwBfdSessPerfBadOut | 1.3.6.1.4.1.2011.5.25.38.2.4.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The statistical information of the send Errors in local system in this session. | ||||
| ChwBfdSessPerfBadOutHC | 1.3.6.1.4.1.2011.5.25.38.2.4.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The statistical information of the send Errors in local system in this session.The high 4 bytes of total send wrong packet number. | ||||
| ChwBfdSessPerfLastSessDownTime | 1.3.6.1.4.1.2011.5.25.38.2.4.1.10 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The time of session last time down. | ||||
| ChwBfdSessPerfSessDownCount | 1.3.6.1.4.1.2011.5.25.38.2.4.1.11 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The total count of session down. | ||||
| ChwBfdSessPerfSessShortBreakCount | 1.3.6.1.4.1.2011.5.25.38.2.4.1.12 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The total count of session shortbreak. | ||||
| ChwBfdSessionPerStartTime | 1.3.6.1.4.1.2011.5.25.38.2.4.1.13 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The time that session start detection. | ||||
| ThwBfdSlotTable | 1.3.6.1.4.1.2011.5.25.38.2.5 | NA | ||
table · not-accessible · current The Slot table of BFD. BFD statistics on specify board of containing the following objects. | ||||
| RhwBfdSlotEntry | 1.3.6.1.4.1.2011.5.25.38.2.5.1 | NA | ||
row · not-accessible · current The Slot table of BFD. BFD statistics on specify board of containing the following objects. The index of this entry is hwBfdSlotID.
| ||||
| ChwBfdSlotID | 1.3.6.1.4.1.2011.5.25.38.2.5.1.1 | Unsigned32 (0..31) | NA | |
column · Unsigned32 (0..31) · not-accessible · current The ID of slot. | ||||
| ChwBfdSlotReserveOneHopSessNum | 1.3.6.1.4.1.2011.5.25.38.2.5.1.2 | Unsigned32 (0..512) | RC | |
column · Unsigned32 (0..512) · read-create · current The number of session reserving for one-hop session on the board. | ||||
| ChwBfdSlotOneHopSessNum | 1.3.6.1.4.1.2011.5.25.38.2.5.1.3 | Unsigned32 (0..512) | RO | obsolete |
column · Unsigned32 (0..512) · read-only · obsolete The number of session for one-hop session on the board. | ||||
| ChwBfdSlotCurrentSessNum | 1.3.6.1.4.1.2011.5.25.38.2.5.1.4 | Unsigned32 (0..512) | RO | |
column · Unsigned32 (0..512) · read-only · current The number of session on the board on current. | ||||
| ChwBfdSlotRowStatus | 1.3.6.1.4.1.2011.5.25.38.2.5.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current Used to manage the creation and deletion of conceptual rows. | ||||
| ThwBfdTtlConfTable | 1.3.6.1.4.1.2011.5.25.38.2.6 | NA | ||
table · not-accessible · current The TTL configuration table. | ||||
| RhwBfdTtlConfEntry | 1.3.6.1.4.1.2011.5.25.38.2.6.1 | NA | ||
row · not-accessible · current The TTL configuration table. The index of this entry is hwBfdTtlConfAddr, hwBfdTtlConfMaskLen and hwBfdTtlConfType. | ||||
| ChwBfdTtlConfAddr | 1.3.6.1.4.1.2011.5.25.38.2.6.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current IP address. | ||||
| ChwBfdTtlConfMaskLen | 1.3.6.1.4.1.2011.5.25.38.2.6.1.2 | Integer32 (8..32) | NA | |
column · Integer32 (8..32) · not-accessible · current Length of IP address mask. | ||||
| ChwBfdTtlConfType | 1.3.6.1.4.1.2011.5.25.38.2.6.1.3 | INTEGER | NA | |
column · INTEGER · not-accessible · current Type of BFD session. Options: 1. singleHop(1) -single hop bfd session 2. multiHop(2) -multi hop bfd session
| ||||
| ChwBfdTtlConfValue | 1.3.6.1.4.1.2011.5.25.38.2.6.1.4 | Integer32 (1..255) | RC | |
column · Integer32 (1..255) · read-create · current TTL value. | ||||
| ChwBfdTtlConfRowStatus | 1.3.6.1.4.1.2011.5.25.38.2.6.1.50 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this table entry. | ||||
| ThwBfdPassiveAuthTable | 1.3.6.1.4.1.2011.5.25.38.2.7 | NA | ||
table · not-accessible · current The authentication configuration table for entire dynamic bfd session on egress. | ||||
| RhwBfdPassiveAuthEntry | 1.3.6.1.4.1.2011.5.25.38.2.7.1 | NA | ||
row · not-accessible · current The authentication configuration table for entire dynamic bfd session on egress. The index of this entry is hwBfdPassiveAuthPeerAddr and hwBfdPassiveAuthProtocol. | ||||
| ChwBfdPassiveAuthPeerAddr | 1.3.6.1.4.1.2011.5.25.38.2.7.1.1 | IpAddress | RC | |
column · IpAddress · read-create · current Specify the Lsr-id IP address of the ingress. | ||||
| ChwBfdPassiveAuthProtocol | 1.3.6.1.4.1.2011.5.25.38.2.7.1.2 | Integer32 (1..2) | RC | |
column · Integer32 (1..2) · read-create · current Specify the protocol on ingress. Options: 1. te(1) -MPLS TE protocol 2. ldp(2) -MPLS LDP protocol | ||||
| ChwBfdPassiveAuthKeychainName | 1.3.6.1.4.1.2011.5.25.38.2.7.1.3 | OCTET STRING (SIZE (1..47)) | RC | |
column · OCTET STRING (SIZE (1..47)) · read-create · current Specify the name of the keychain for authentication of entire dynamic bfd session. | ||||
| ChwBfdPassiveAuthMeticulous | 1.3.6.1.4.1.2011.5.25.38.2.7.1.4 | EnabledStatus | RO | |
column · EnabledStatus · read-only · current Whether enable meticulous authentication for SHA-1 type. Options: 1. enabled(1) -enable meticulous authentication for SHA-1 type 2. disabled(2) -disabled meticulous authentication for SHA-1 type Default: 2 | ||||
| ChwBfdPassiveAuthLoose | 1.3.6.1.4.1.2011.5.25.38.2.7.1.5 | TruthValue | RO | |
column · TruthValue · read-only · current Whether loose authentication check. Options: 1. True(1) -loose-check 2. False(2) -do not loose-check Default: false | ||||
| ChwBfdPassiveAuthRowStatus | 1.3.6.1.4.1.2011.5.25.38.2.7.1.50 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this table entry. | ||||
| NhwBfdNotifications | 1.3.6.1.4.1.2011.5.25.38.3 | |||
| !hwBfdSessDown | 1.3.6.1.4.1.2011.5.25.38.3.1 | |||
notification · current This trap occurred when the state of the BFD session became down. The BFD session is characterized by the objects in this node.
| ||||
| !hwBfdSessUp | 1.3.6.1.4.1.2011.5.25.38.3.2 | |||
notification · current This trap occurred when the state of the BFD session became up. The BFD session is characterized by the objects in this node.
| ||||
| !hwBfdSessReachLimit | 1.3.6.1.4.1.2011.5.25.38.3.3 | |||
notification · current There is the notify when the session number reach the global limit.
| ||||
| !hwBfdSessReachLimitBindIf | 1.3.6.1.4.1.2011.5.25.38.3.4 | |||
notification · current There is the notify when the session number reach the interface limit. | ||||
| !hwBfdSessReachLimitResume | 1.3.6.1.4.1.2011.5.25.38.3.5 | |||
notification · current There is the notify when the session number reach the global limit was cleared.
| ||||
| !hwBfdSessReachLimitBindIfResume | 1.3.6.1.4.1.2011.5.25.38.3.6 | |||
notification · current There is the notify when the session number reach the interface limit was cleared. | ||||
| !hwBfdSessCfgRemoteFail | 1.3.6.1.4.1.2011.5.25.38.3.7 | |||
notification · current This notification is generated when the virtual access AP process BFD configuration failed. | ||||
| !hwBfdSessFaultDown | 1.3.6.1.4.1.2011.5.25.38.3.8 | |||
notification · current This trap occurred when the state of the BFD session became down. The BFD session is characterized by the objects in this node. | ||||
| !hwBfdSessResume | 1.3.6.1.4.1.2011.5.25.38.3.9 | |||
notification · current This trap occurred when the state of the BFD session resume from down state. The BFD session is characterized by the objects in this node. | ||||
| !hwBfdSessApOperFailed | 1.3.6.1.4.1.2011.5.25.38.3.10 | |||
notification · current This trap occurred when failed to config access point. | ||||
| !hwBfdSessFsmDiscordant | 1.3.6.1.4.1.2011.5.25.38.3.11 | |||
notification · current This trap occurred when the state of the BFD session FSM's board is different from the monitored link's board. The BFD session is characterized by the objects in this node. | ||||
| !hwBfdSessFsmAccordant | 1.3.6.1.4.1.2011.5.25.38.3.12 | |||
notification · current This trap occurred when the state of the BFD session FSM's board is the same as the monitored link's board. The BFD session is characterized by the objects in this node. | ||||
| !hwBfdIPv6SessDown | 1.3.6.1.4.1.2011.5.25.38.3.13 | |||
notification · current This trap occurred when the state of the BFD IPv6 session became down. The BFD session is characterized by the objects in this node.
| ||||
| !hwBfdIPv6SessUp | 1.3.6.1.4.1.2011.5.25.38.3.14 | |||
notification · current This trap occurred when the state of the BFD IPv6 session became up. The BFD session is characterized by the objects in this node.
| ||||
| !hwBfdBitErrorDetectSessReachLimit | 1.3.6.1.4.1.2011.5.25.38.3.15 | |||
notification · current There is the notify when the bit-error-detection session number reach the global limit. | ||||
| !hwBfdSessReachTotalLimit | 1.3.6.1.4.1.2011.5.25.38.3.16 | |||
notification · current The session number in all the IO boards has reached the limit, the new session can not be created.
| ||||
| !hwBfdSessReachTotalLimitResume | 1.3.6.1.4.1.2011.5.25.38.3.17 | |||
notification · current The number of BFD sessions is restored within the specified range, the new session can be created.
| ||||
| NhwBfdConformance | 1.3.6.1.4.1.2011.5.25.38.4 | |||
| NhwBfdCompliances | 1.3.6.1.4.1.2011.5.25.38.4.1 | |||
| MhwBfdFullCompliance | 1.3.6.1.4.1.2011.5.25.38.4.1.1 | |||
compliance · current The compliance statement for entities which implement the Huawei BFD MIB. | ||||
| NhwBfdGroups | 1.3.6.1.4.1.2011.5.25.38.4.2 | |||
| GhwBfdGroup | 1.3.6.1.4.1.2011.5.25.38.4.2.1 | |||
group · current A collection of objects providing BFD global information.
| ||||
| GhwBfdSessGroup | 1.3.6.1.4.1.2011.5.25.38.4.2.2 | |||
group · current A collection of objects providing BFD session information.
| ||||
| GhwBfdObsoleteGroup | 1.3.6.1.4.1.2011.5.25.38.4.2.3 | obsolete | ||
group · obsolete A collection of objects which are obsolete. | ||||
| GhwBfdNotificationGroup | 1.3.6.1.4.1.2011.5.25.38.4.2.4 | |||
group · current A collection of traps. | ||||
| NhwBfdTrapsVbOids | 1.3.6.1.4.1.2011.5.25.38.5 | |||
| ShwBfdSessVlanID | 1.3.6.1.4.1.2011.5.25.38.5.1 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current The VLANID binding to BFD session. | ||||
| ShwBfdCfgApUserName | 1.3.6.1.4.1.2011.5.25.38.5.2 | OCTET STRING (SIZE (0..128)) | AN | |
scalar · OCTET STRING (SIZE (0..128)) · accessible-for-notify · current The name of user failed to configure access point. | ||||
| ShwBfdCfgApIPAddress | 1.3.6.1.4.1.2011.5.25.38.5.3 | OCTET STRING (SIZE (0..128)) | AN | |
scalar · OCTET STRING (SIZE (0..128)) · accessible-for-notify · current The IP-address of user failed to configure access point. | ||||
| ShwBfdCfgApID | 1.3.6.1.4.1.2011.5.25.38.5.4 | Unsigned32 (1..8191) | AN | |
scalar · Unsigned32 (1..8191) · accessible-for-notify · current The ID of access point failed to be configured. | ||||
| ShwBfdCfgApOperation | 1.3.6.1.4.1.2011.5.25.38.5.5 | OCTET STRING (SIZE (0..128)) | AN | |
scalar · OCTET STRING (SIZE (0..128)) · accessible-for-notify · current The operation of confiuration to access point. | ||||
| ShwBfdCfgApReason | 1.3.6.1.4.1.2011.5.25.38.5.6 | OCTET STRING (SIZE (0..128)) | AN | |
scalar · OCTET STRING (SIZE (0..128)) · accessible-for-notify · current The reason of failed to configure access point. | ||||
| NhwBfdTraps | 1.3.6.1.4.1.2011.5.25.38.6 | |||
| NhwBfdCommonTraps | 1.3.6.1.4.1.2011.5.25.38.6.1 | |||
| NhwBfdAlarmTraps | 1.3.6.1.4.1.2011.5.25.38.6.2 | |||
| NhwBfdAlarmTrapsPrefix | 1.3.6.1.4.1.2011.5.25.38.6.2.0 | |||
| !hwBfdSessUpTrap | 1.3.6.1.4.1.2011.5.25.38.6.2.0.1 | |||
notification · current This notification is generated when the bfdSessState object for one entry in bfdSessionTable is about to enter the up(3) state from some other state. | ||||
| !hwBfdSessDownTrap | 1.3.6.1.4.1.2011.5.25.38.6.2.0.2 | |||
notification · current This notification is generated when the bfdSessState object for one entry in bfdSessionTable is about to enter the down(1) or adminDown(0) states from some other state. | ||||
| !hwBfdv6SingleHopSessUpTrap | 1.3.6.1.4.1.2011.5.25.38.6.2.0.3 | |||
notification · current This notification is generated when the bfdSessState object for one entry in bfdSessionTable is about to enter the up(3) state from some other state. | ||||
| !hwBfdv6SingleHopSessDownTrap | 1.3.6.1.4.1.2011.5.25.38.6.2.0.4 | |||
notification · current This notification is generated when the bfdSessState object for one entry in bfdSessionTable is about to enter the down(1) or adminDown(0) states from some other state. | ||||
| !hwBfdv6MultiHopSessUpTrap | 1.3.6.1.4.1.2011.5.25.38.6.2.0.5 | |||
notification · current This notification is generated when the bfdSessState object for one entry in bfdSessionTable is about to enter the up(3) state from some other state. | ||||
| !hwBfdv6MultiHopSessDownTrap | 1.3.6.1.4.1.2011.5.25.38.6.2.0.6 | |||
notification · current This notification is generated when the bfdSessState object for one entry in bfdSessionTable is about to enter the down(1) or adminDown(0) states from some other state. | ||||
| !hwBfdPWSessUp | 1.3.6.1.4.1.2011.5.25.38.6.2.0.7 | |||
notification · current This notification is generated when the bfdSessState object for one entry in bfdSessionTable is about to enter the up(3) state from some other state. | ||||
| !hwBfdPWSessDown | 1.3.6.1.4.1.2011.5.25.38.6.2.0.8 | |||
notification · current This notification is generated when the bfdSessState object for one entry in bfdSessionTable is about to enter the down(1) or adminDown(0) states from some other state. | ||||
Textual conventions
BfdDiagInteger32Diagnostic code specifying the local system's reason for the last session state changed.
BfdIntervalInteger32Bfd Time Interval Type.
Traps / Notifications
- hwBfdBitErrorDetectSessReachLimit
1.3.6.1.4.1.2011.5.25.38.3.15 - hwBfdIPv6SessDown
1.3.6.1.4.1.2011.5.25.38.3.13 - hwBfdIPv6SessUp
1.3.6.1.4.1.2011.5.25.38.3.14 - hwBfdPWSessDown
1.3.6.1.4.1.2011.5.25.38.6.2.0.8 - hwBfdPWSessUp
1.3.6.1.4.1.2011.5.25.38.6.2.0.7 - hwBfdSessApOperFailed
1.3.6.1.4.1.2011.5.25.38.3.10 - hwBfdSessCfgRemoteFail
1.3.6.1.4.1.2011.5.25.38.3.7 - hwBfdSessDown
1.3.6.1.4.1.2011.5.25.38.3.1 - hwBfdSessDownTrap
1.3.6.1.4.1.2011.5.25.38.6.2.0.2 - hwBfdSessFaultDown
1.3.6.1.4.1.2011.5.25.38.3.8 - hwBfdSessFsmAccordant
1.3.6.1.4.1.2011.5.25.38.3.12 - hwBfdSessFsmDiscordant
1.3.6.1.4.1.2011.5.25.38.3.11 - hwBfdSessReachLimit
1.3.6.1.4.1.2011.5.25.38.3.3 - hwBfdSessReachLimitBindIf
1.3.6.1.4.1.2011.5.25.38.3.4 - hwBfdSessReachLimitBindIfResume
1.3.6.1.4.1.2011.5.25.38.3.6 - hwBfdSessReachLimitResume
1.3.6.1.4.1.2011.5.25.38.3.5 - hwBfdSessReachTotalLimit
1.3.6.1.4.1.2011.5.25.38.3.16 - hwBfdSessReachTotalLimitResume
1.3.6.1.4.1.2011.5.25.38.3.17 - hwBfdSessResume
1.3.6.1.4.1.2011.5.25.38.3.9 - hwBfdSessUp
1.3.6.1.4.1.2011.5.25.38.3.2 - hwBfdSessUpTrap
1.3.6.1.4.1.2011.5.25.38.6.2.0.1 - hwBfdv6MultiHopSessDownTrap
1.3.6.1.4.1.2011.5.25.38.6.2.0.6 - hwBfdv6MultiHopSessUpTrap
1.3.6.1.4.1.2011.5.25.38.6.2.0.5 - hwBfdv6SingleHopSessDownTrap
1.3.6.1.4.1.2011.5.25.38.6.2.0.4 - hwBfdv6SingleHopSessUpTrap
1.3.6.1.4.1.2011.5.25.38.6.2.0.3