HUAWEI-ATM-MIB
HUAWEI Technology Co.,LtdV1.3, add hwAtmPvcStatisticInputCellDrops,hwAtmPvcStatisticInputPktDrops, hwAtmPvcStatisticOutputCellDrops and hwAtmPvcStatisticOutputPktDrops for HwAtmPvcStatisticEntry.
snmptranslate -m HUAWEI-ATM-MIB -Tpsnmpwalk -v2c -c <community> -m HUAWEI-ATM-MIB <host> 1.3.6.1.4.1.2011.5.25.156Imports
| ATM-MIB | atmMIBObjects |
|---|---|
| ATM-TC-MIB | AtmVcIdentifier, AtmVpIdentifier |
| HUAWEI-DEVICE-MIB | hwFrameIndex, hwPortIndex, hwSlotIndex |
| HUAWEI-MIB | hwDatacomm |
| IF-MIB | InterfaceIndex, InterfaceIndexOrZero, ifName |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IhwAtmMIB | 1.3.6.1.4.1.2011.5.25.156 | |||
identity V1.3, add hwAtmPvcStatisticInputCellDrops,hwAtmPvcStatisticInputPktDrops, hwAtmPvcStatisticOutputCellDrops and hwAtmPvcStatisticOutputPktDrops for HwAtmPvcStatisticEntry. | ||||
| NhwAtmObjects | 1.3.6.1.4.1.2011.5.25.156.1 | |||
| ThwAtmTable | 1.3.6.1.4.1.2011.5.25.156.1.1 | NA | ||
table · not-accessible · current This table is used to configure the parameters of the ATM interface. | ||||
| RhwAtmEntry | 1.3.6.1.4.1.2011.5.25.156.1.1.1 | NA | ||
row · not-accessible · current This table is used to configure the parameters of the ATM interface.
| ||||
| ChwAtmIfIndex | 1.3.6.1.4.1.2011.5.25.156.1.1.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Indicates the interface index. | ||||
| ChwAtmIfType | 1.3.6.1.4.1.2011.5.25.156.1.1.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates the interface type.
| ||||
| ChwAtmClock | 1.3.6.1.4.1.2011.5.25.156.1.1.1.12 | INTEGER | RW | |
column · INTEGER · read-write · current Master clock: uses the internal clock signal. Slave clock: uses the line clock signal.
| ||||
| ChwAtmFrameFormat | 1.3.6.1.4.1.2011.5.25.156.1.1.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current For the optical interface STM-1/STM-4, the frame format on the ATM interface is SDH; for the OC-3/OC-12 interface, the frame format is SONET. The default frame format is SDH.
| ||||
| ChwAtmScramble | 1.3.6.1.4.1.2011.5.25.156.1.1.1.14 | TruthValue | RW | |
column · TruthValue · read-write · current By default, the scramble function is enabled. The scramble function takes effect only on payload rather than cell header. true: enables the scramble function. false: disables the scramble function. | ||||
| ChwAtmLoopback | 1.3.6.1.4.1.2011.5.25.156.1.1.1.15 | INTEGER | RW | |
column · INTEGER · read-write · current Enable the loopback function of the channel. local: enables the local loopback on the interface. remote: enables the remote loopback on the interface. payload: enables the remote payload loopback on the interface. By default, all loopback functions are disabled.
| ||||
| ChwAtmPitp | 1.3.6.1.4.1.2011.5.25.156.1.1.1.16 | INTEGER | RW | |
column · INTEGER · read-write · current Enable or disable the function of PITP.
| ||||
| ChwAtmFlagJ0Mode | 1.3.6.1.4.1.2011.5.25.156.1.1.1.17 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates the overhead byte of the SDH frame. j0: sets section trace byte. The default value is j016ByteMode(2);hwAtmFlagJ0Trace:NetEngine.
| ||||
| ChwAtmFlagJ0Value | 1.3.6.1.4.1.2011.5.25.156.1.1.1.18 | Integer32 (0..127) | RW | |
column · Integer32 (0..127) · read-write · current Indicates the value of j01ByteMode. When hwAtmFlagJ0Mode is set to j01ByteMode, hwAtmFlagJ0Value takes effect. | ||||
| ChwAtmFlagJ0Trace | 1.3.6.1.4.1.2011.5.25.156.1.1.1.19 | OCTET STRING (SIZE (0..64)) | RW | |
column · OCTET STRING (SIZE (0..64)) · read-write · current Set section trace byte. When hwAtmFlagJ0Mode is set to j016ByteMode or j064ByteOrNullMode, this variable takes effect. When hwAtmFlagJ0Mode is set to j016ByteMode, the value of this variable is up to 15 characters trace byte. When hwAtmFlagJ0Mode is set to j064ByteOrNullMode, the value of this variable is up to 64 characters trace byte. | ||||
| ChwAtmFlagJ1Mode | 1.3.6.1.4.1.2011.5.25.156.1.1.1.20 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates the overhead byte of the SDH frame. j1: sets path trace byte. The default value is j116ByteMode(2);hwAtmFlagJ1Trace:NetEngine.
| ||||
| ChwAtmFlagJ1Value | 1.3.6.1.4.1.2011.5.25.156.1.1.1.21 | Integer32 (0..127) | RW | |
column · Integer32 (0..127) · read-write · current Indicates the value of j11ByteMode. When hwAtmFlagJ1Mode is set to j11ByteMode, hwAtmFlagJ1Value takes effect. | ||||
| ChwAtmFlagJ1Trace | 1.3.6.1.4.1.2011.5.25.156.1.1.1.22 | OCTET STRING (SIZE (0..64)) | RW | |
column · OCTET STRING (SIZE (0..64)) · read-write · current Set path trace byte. When hwAtmFlagJ1Mode is set to j116ByteMode or j164ByteOrNullMode, this variable takes effect. When hwAtmFlagJ1Mode is set to j116ByteMode, this variable is up to 15 characters trace byte. When hwAtmFlagJ1Mode is set to j164ByteOrNullMode, this variable is up to 64 characters trace byte. | ||||
| ChwAtmFlagC2Value | 1.3.6.1.4.1.2011.5.25.156.1.1.1.23 | Integer32 (0..255) | RW | |
column · Integer32 (0..255) · read-write · current Indicates the overhead byte of the SDH frame. c2: indicates the signal label byte. It is a hexdecimal value ranging from 00 to FF. The default value is 0x02. | ||||
| ThwAtmMapPvpTable | 1.3.6.1.4.1.2011.5.25.156.1.2 | NA | ||
table · not-accessible · current This table is used to configure the mapping between the peer VPI and the local VPI. | ||||
| RhwAtmMapPvpEntry | 1.3.6.1.4.1.2011.5.25.156.1.2.1 | NA | ||
row · not-accessible · current This table is used to configure the mapping between the peer VPI and the local VPI. | ||||
| ChwAtmMapPvpIfIndex | 1.3.6.1.4.1.2011.5.25.156.1.2.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Indicates the interface index. | ||||
| ChwAtmMapPvpVplVpi | 1.3.6.1.4.1.2011.5.25.156.1.2.1.2 | AtmVpIdentifier | NA | |
column · AtmVpIdentifier · not-accessible · current Indicates the local VPI value. The value is an integer. For UNI interface, VPI value ranging from 0 to 255; For NNI interface, VPI value ranging from 0 to 4095. | ||||
| ChwAtmMapPvpRemoteVplVpi | 1.3.6.1.4.1.2011.5.25.156.1.2.1.11 | AtmVpIdentifier | RC | |
column · AtmVpIdentifier · read-create · current Indicates the peer VPI value. The value is an integer. For UNI interface, VPI value ranging from 0 to 255; For NNI interface, VPI value ranging from 0 to 4095. | ||||
| ChwAtmMapPvpBi | 1.3.6.1.4.1.2011.5.25.156.1.2.1.12 | INTEGER | RW | |
column · INTEGER · read-write · current Description.
| ||||
| ChwAtmMapPvpRowStatus | 1.3.6.1.4.1.2011.5.25.156.1.2.1.51 | RowStatus | RC | |
column · RowStatus · read-create · current This variable is used to create or delete an object. | ||||
| ThwAtmMapPvcTable | 1.3.6.1.4.1.2011.5.25.156.1.3 | NA | ||
table · not-accessible · current This table is used to configure the mapping between the peer VPI/VCI and the local VPI/VCI. | ||||
| RhwAtmMapPvcEntry | 1.3.6.1.4.1.2011.5.25.156.1.3.1 | NA | ||
row · not-accessible · current This table is used to configure the mapping between the peer VPI/VCI and the local VPI/VCI. | ||||
| ChwAtmMapPvcIfIndex | 1.3.6.1.4.1.2011.5.25.156.1.3.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Indicates the interface index. | ||||
| ChwAtmMapPvcVclVpi | 1.3.6.1.4.1.2011.5.25.156.1.3.1.2 | AtmVpIdentifier | NA | |
column · AtmVpIdentifier · not-accessible · current Indicates the local VPI value. The value is an integer. For UNI interface, VPI value ranging from 0 to 255; For NNI interface, VPI value ranging from 0 to 4095. | ||||
| ChwAtmMapPvcVclVci | 1.3.6.1.4.1.2011.5.25.156.1.3.1.3 | AtmVcIdentifier | NA | |
column · AtmVcIdentifier · not-accessible · current Indicates the local VCI value. VCI is short for Virtual Channel Identifier. The VCI value ranges from 0 to 65535. Generally, the values 3, 4 and 65535 are reserved for specail use. | ||||
| ChwAtmMapPvcRemoteVclVci | 1.3.6.1.4.1.2011.5.25.156.1.3.1.11 | AtmVcIdentifier | RC | |
column · AtmVcIdentifier · read-create · current Indicates the peer VCI value. VCI is short for Virtual Channel Identifier. The VCI value ranges from 0 to 65535. Generally, the values 3, 4 and 65535 are reserved for specail use. | ||||
| ChwAtmMapPvcRemoteVclVpi | 1.3.6.1.4.1.2011.5.25.156.1.3.1.12 | AtmVpIdentifier | RC | |
column · AtmVpIdentifier · read-create · current Indicates the peer VPI value. The value is an integer. For UNI interface, VPI value ranging from 0 to 255; For NNI interface, VPI value ranging from 0 to 4095. | ||||
| ChwAtmMapPvcBi | 1.3.6.1.4.1.2011.5.25.156.1.3.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current Description.
| ||||
| ChwAtmMapPvcRowStatus | 1.3.6.1.4.1.2011.5.25.156.1.3.1.51 | RowStatus | RC | |
column · RowStatus · read-create · current This variable is used to create or delete an object. | ||||
| ThwAtmServiceTable | 1.3.6.1.4.1.2011.5.25.156.1.4 | NA | ||
table · not-accessible · current This table is used to configure the service type and related parameters for the PVC. | ||||
| RhwAtmServiceEntry | 1.3.6.1.4.1.2011.5.25.156.1.4.1 | NA | ||
row · not-accessible · current This table is used to configure the service type for the PVC.
| ||||
| ChwAtmServiceName | 1.3.6.1.4.1.2011.5.25.156.1.4.1.1 | OCTET STRING (SIZE (1..31)) | NA | |
column · OCTET STRING (SIZE (1..31)) · not-accessible · current Indicates the name of the service type. The name is a string of 1 to 31 characters. | ||||
| ChwAtmServiceType | 1.3.6.1.4.1.2011.5.25.156.1.4.1.11 | INTEGER | RC | |
column · INTEGER · read-create · current Set the service type for the PVC as required.
| ||||
| ChwAtmServiceOutputPcr | 1.3.6.1.4.1.2011.5.25.156.1.4.1.12 | Integer32 (0 | 8..599040) | RC | |
column · Integer32 (0 | 8..599040) · read-create · current Indicates the peak output rate of the ATM cell. When hwPvcServiceTableType is ubr, the peak output rate is 0. | ||||
| ChwAtmServiceOutputScr | 1.3.6.1.4.1.2011.5.25.156.1.4.1.13 | Integer32 (0 | 8..599040) | RC | |
column · Integer32 (0 | 8..599040) · read-create · current Indicates the peak output rate of the ATM cell. When hwPvcServiceTableType is cbr or ubr, the peak output rate is 0. | ||||
| ChwAtmServiceOutputMbs | 1.3.6.1.4.1.2011.5.25.156.1.4.1.14 | Integer32 (0 | 1..512) | RC | |
column · Integer32 (0 | 1..512) · read-create · current Indicates the peak output rate of the ATM cell. When hwPvcServiceTableType is cbr or ubr, the peak output rate is 0. | ||||
| ChwAtmServiceCbrCdvtValue | 1.3.6.1.4.1.2011.5.25.156.1.4.1.15 | Integer32 (0..10000000) | RC | |
column · Integer32 (0..10000000) · read-create · current Indicates the limit of the ATM cell delay variation. When hwPvcServiceTableType is cbr, the variable is valid. For other service types, the variable is 0. | ||||
| ChwAtmServiceOutputMcr | 1.3.6.1.4.1.2011.5.25.156.1.4.1.16 | Integer32 (0 | 8..599040) | RC | |
column · Integer32 (0 | 8..599040) · read-create · current Indicates the mini width guarantee bit rate of the ATM cell. When hwPvcServiceTableType is ubr, the peak output rate is 0. | ||||
| ChwAtmServiceRowStatus | 1.3.6.1.4.1.2011.5.25.156.1.4.1.51 | RowStatus | RC | |
column · RowStatus · read-create · current This variable is used to create or delete an object. | ||||
| ThwAtmPvcServiceTable | 1.3.6.1.4.1.2011.5.25.156.1.5 | NA | ||
table · not-accessible · current This table is used to configure the service type for the PVC. | ||||
| RhwAtmPvcServiceEntry | 1.3.6.1.4.1.2011.5.25.156.1.5.1 | NA | ||
row · not-accessible · current This table is used to configure the service type for the PVC. | ||||
| ChwAtmPvcServiceIfIndex | 1.3.6.1.4.1.2011.5.25.156.1.5.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Indicates the interface index. | ||||
| ChwAtmPvcServiceVpi | 1.3.6.1.4.1.2011.5.25.156.1.5.1.2 | AtmVpIdentifier | NA | |
column · AtmVpIdentifier · not-accessible · current Indicates the local VPI value. The value is an integer. For UNI interface, VPI value ranging from 0 to 255; For NNI interface, VPI value ranging from 0 to 4095. | ||||
| ChwAtmPvcServiceVci | 1.3.6.1.4.1.2011.5.25.156.1.5.1.3 | AtmVcIdentifier | NA | |
column · AtmVcIdentifier · not-accessible · current Indicates the local VCI value. VCI is short for Virtual Channel Identifier. The VCI value ranges from 0 to 65535. Generally, the values 3, 4 and 65535 are reserved for specail use. | ||||
| ChwAtmPvcServiceName | 1.3.6.1.4.1.2011.5.25.156.1.5.1.11 | OCTET STRING (SIZE (1..31)) | RC | |
column · OCTET STRING (SIZE (1..31)) · read-create · current Indicates the name of the service type. The name is a string of 1 to 31 characters. | ||||
| ChwAtmPvcTransmittalDirection | 1.3.6.1.4.1.2011.5.25.156.1.5.1.21 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates the input or output tpye of the service type.
| ||||
| ChwAtmPvcPriority | 1.3.6.1.4.1.2011.5.25.156.1.5.1.22 | Integer32 (1..7) | RW | |
column · Integer32 (1..7) · read-write · current Indicates the priority of the output service. | ||||
| ChwAtmPvcServiceBuffer | 1.3.6.1.4.1.2011.5.25.156.1.5.1.23 | Integer32 (128..8192 | -1) | RW | |
column · Integer32 (128..8192 | -1) · read-write · current The range of buffer,0xFFFFFFFF is invalid value for ima/serial interface which not support. | ||||
| ChwAtmPvcServiceRowStatus | 1.3.6.1.4.1.2011.5.25.156.1.5.1.51 | RowStatus | RC | |
column · RowStatus · read-create · current This variable is used to create or delete an object. | ||||
| ThwAtmVpVlanMapTable | 1.3.6.1.4.1.2011.5.25.156.1.6 | NA | ||
table · not-accessible · current This table is used to configure the VP vlan map. | ||||
| RhwAtmVpVlanMapEntry | 1.3.6.1.4.1.2011.5.25.156.1.6.1 | NA | ||
row · not-accessible · current This table is used to configure the VP vlan map. | ||||
| ChwAtmVpVlanMapIfIndex | 1.3.6.1.4.1.2011.5.25.156.1.6.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Indicates the interface index. | ||||
| ChwAtmVpVlanMapVpi | 1.3.6.1.4.1.2011.5.25.156.1.6.1.2 | AtmVpIdentifier | NA | |
column · AtmVpIdentifier · not-accessible · current VPI. | ||||
| ChwAtmVpVlanMapPeVid | 1.3.6.1.4.1.2011.5.25.156.1.6.1.11 | Integer32 (1..4094) | RC | |
column · Integer32 (1..4094) · read-create · current PE VLAN ID. | ||||
| ChwAtmVpVlanMapRowStatus | 1.3.6.1.4.1.2011.5.25.156.1.6.1.51 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus. | ||||
| ThwAtmVcVlanMapTable | 1.3.6.1.4.1.2011.5.25.156.1.7 | NA | ||
table · not-accessible · current This table is used to configure the VC vlan map. | ||||
| RhwAtmVcVlanMapEntry | 1.3.6.1.4.1.2011.5.25.156.1.7.1 | NA | ||
row · not-accessible · current This table is used to configure the VC vlan map. | ||||
| ChwAtmVcVlanMapIfIndex | 1.3.6.1.4.1.2011.5.25.156.1.7.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Indicates the interface index. | ||||
| ChwAtmVcVlanMapVpi | 1.3.6.1.4.1.2011.5.25.156.1.7.1.2 | AtmVpIdentifier | NA | |
column · AtmVpIdentifier · not-accessible · current VPI. | ||||
| ChwAtmVcVlanMapBeginVci | 1.3.6.1.4.1.2011.5.25.156.1.7.1.11 | Integer32 (0..2 | 5..65534) | RC | |
column · Integer32 (0..2 | 5..65534) · read-create · current Begin VCI Value, not config 3 or 4. | ||||
| ChwAtmVcVlanMapEndVci | 1.3.6.1.4.1.2011.5.25.156.1.7.1.12 | Integer32 (0..2 | 5..65534) | RC | |
column · Integer32 (0..2 | 5..65534) · read-create · current End VCI Value, not config 3 or 4. | ||||
| ChwAtmVcVlanMapCeVid | 1.3.6.1.4.1.2011.5.25.156.1.7.1.13 | Integer32 (0..4089) | RC | |
column · Integer32 (0..4089) · read-create · current CE VLAN ID. | ||||
| ChwAtmVpVlanMapServiceName | 1.3.6.1.4.1.2011.5.25.156.1.7.1.14 | OCTET STRING (SIZE (1..32)) | RC | |
column · OCTET STRING (SIZE (1..32)) · read-create · current Indicates the name of the service type. The name is a string of 1 to 31 characters. | ||||
| ChwAtmVcVlanMapPiority | 1.3.6.1.4.1.2011.5.25.156.1.7.1.15 | Integer32 (1..7) | RC | |
column · Integer32 (1..7) · read-create · current Piority. | ||||
| ChwAtmVcVlanMapPBit | 1.3.6.1.4.1.2011.5.25.156.1.7.1.18 | Integer32 (0..7) | RW | |
column · Integer32 (0..7) · read-write · current Indicates the p-bit value,the default value is 0. | ||||
| ChwAtmVcVlanMapRowStatus | 1.3.6.1.4.1.2011.5.25.156.1.7.1.51 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus. | ||||
| ThwAtmPvpServiceTable | 1.3.6.1.4.1.2011.5.25.156.1.8 | NA | ||
table · not-accessible · current This table is used to configure the service type for the PVP. | ||||
| RhwAtmPvpServiceEntry | 1.3.6.1.4.1.2011.5.25.156.1.8.1 | NA | ||
row · not-accessible · current This table is used to configure the service type for the PVP. | ||||
| ChwAtmPvpServiceIfIndex | 1.3.6.1.4.1.2011.5.25.156.1.8.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Indicates the interface index. | ||||
| ChwAtmPvpServiceVpi | 1.3.6.1.4.1.2011.5.25.156.1.8.1.2 | AtmVpIdentifier | NA | |
column · AtmVpIdentifier · not-accessible · current Indicates the local VPI value. The value is an integer.
For UNI interface, VPI value ranging from 0 to 255;
For NNI interface, VPI value ranging from 0 to 4095. | ||||
| ChwAtmPvpServiceName | 1.3.6.1.4.1.2011.5.25.156.1.8.1.11 | OCTET STRING (SIZE (1..31)) | RC | |
column · OCTET STRING (SIZE (1..31)) · read-create · current Indicates the name of the service type. The name is a string of 1 to 31 characters. | ||||
| ChwAtmPvpTransmittalDirection | 1.3.6.1.4.1.2011.5.25.156.1.8.1.21 | INTEGER | RC | |
column · INTEGER · read-create · current Indicates the input or output tpye of the service type.
| ||||
| ChwAtmPvpPriority | 1.3.6.1.4.1.2011.5.25.156.1.8.1.22 | Integer32 (1..7) | RC | |
column · Integer32 (1..7) · read-create · current Indicates the priority of the output service. | ||||
| ChwAtmPvpServiceBuffer | 1.3.6.1.4.1.2011.5.25.156.1.8.1.23 | Integer32 (128..8192 | -1) | RW | |
column · Integer32 (128..8192 | -1) · read-write · current The range of buffer,0xFFFFFFFF is invalid value for ima/serial interface which not support | ||||
| ChwAtmPvpServiceRowStatus | 1.3.6.1.4.1.2011.5.25.156.1.8.1.51 | RowStatus | RC | |
column · RowStatus · read-create · current This variable is used to create or delete an object. | ||||
| ThwAtmPvcStatisticTable | 1.3.6.1.4.1.2011.5.25.156.1.9 | NA | ||
table · not-accessible · current This table is used to configure pvc statistic including inputPackets, inputBytes,inputPktErrors,outputPackets,outputBytes and outputPktErrors. | ||||
| RhwAtmPvcStatisticEntry | 1.3.6.1.4.1.2011.5.25.156.1.9.1 | NA | ||
row · not-accessible · current This table is used to configure pvc statistic including inputPackets, inputBytes,inputPktErrors,outputPackets,outputBytes and outputPktErrors. | ||||
| ChwAtmPvcStatisticIfIndex | 1.3.6.1.4.1.2011.5.25.156.1.9.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current This object indicates the interface index. | ||||
| ChwAtmPvcStatisticVpi | 1.3.6.1.4.1.2011.5.25.156.1.9.1.2 | AtmVpIdentifier | NA | |
column · AtmVpIdentifier · not-accessible · current This object indicates the virtual path identifier (VPI) of ATM. The value is an integer. For a UNI, the value ranges from 0 to 255. For an NNI, the value ranges from 0 to 4095. | ||||
| ChwAtmPvcStatisticVci | 1.3.6.1.4.1.2011.5.25.156.1.9.1.3 | AtmVcIdentifier | NA | |
column · AtmVcIdentifier · not-accessible · current This object indicates the virtual channel identifier (VCI) of ATM. | ||||
| ChwAtmPvcStatisticInputPackets | 1.3.6.1.4.1.2011.5.25.156.1.9.1.11 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the number of received packets. | ||||
| ChwAtmPvcStatisticInputBytes | 1.3.6.1.4.1.2011.5.25.156.1.9.1.12 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the number of received bytes. | ||||
| ChwAtmPvcStatisticInputPktErrors | 1.3.6.1.4.1.2011.5.25.156.1.9.1.13 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of received error packets. | ||||
| ChwAtmPvcStatisticInputCells | 1.3.6.1.4.1.2011.5.25.156.1.9.1.14 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the number of received cells. | ||||
| ChwAtmPvcStatisticInputCellErrors | 1.3.6.1.4.1.2011.5.25.156.1.9.1.15 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of received error cells. | ||||
| ChwAtmPvcStatisticOutputPackets | 1.3.6.1.4.1.2011.5.25.156.1.9.1.16 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the number of sent packets. | ||||
| ChwAtmPvcStatisticOutputBytes | 1.3.6.1.4.1.2011.5.25.156.1.9.1.17 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the number of sent bytes. | ||||
| ChwAtmPvcStatisticOutputPktErrors | 1.3.6.1.4.1.2011.5.25.156.1.9.1.18 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of sent error packets. | ||||
| ChwAtmPvcStatisticOutputCells | 1.3.6.1.4.1.2011.5.25.156.1.9.1.19 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the number of sent cells. | ||||
| ChwAtmPvcStatisticOutputCellErrors | 1.3.6.1.4.1.2011.5.25.156.1.9.1.20 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the number of sent error cells. | ||||
| ChwAtmPvcStatisticInputCellDrops | 1.3.6.1.4.1.2011.5.25.156.1.9.1.21 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the number of discarded received cells. | ||||
| ChwAtmPvcStatisticInputPktDrops | 1.3.6.1.4.1.2011.5.25.156.1.9.1.22 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the number of discarded received packets. | ||||
| ChwAtmPvcStatisticOutputCellDrops | 1.3.6.1.4.1.2011.5.25.156.1.9.1.23 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the number of discarded sent cells. | ||||
| ChwAtmPvcStatisticOutputPktDrops | 1.3.6.1.4.1.2011.5.25.156.1.9.1.24 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the number of discarded sent packets. | ||||
| ChwAtmPvcStatisticReset | 1.3.6.1.4.1.2011.5.25.156.1.9.1.51 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates cleared statistics.
| ||||
| ThwAtmIfConfTable | 1.3.6.1.4.1.2011.5.25.156.1.11 | NA | ||
table · not-accessible · current Indicates the configuration of the ATM interface. | ||||
| RhwAtmIfConfEntry | 1.3.6.1.4.1.2011.5.25.156.1.11.1 | NA | ||
row · not-accessible · current Indicates the configuration of the ATM interface.
| ||||
| ChwAtmIfConfIfIndex | 1.3.6.1.4.1.2011.5.25.156.1.11.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Indicates the interface index. | ||||
| ChwAtmIfConfMaxVccs | 1.3.6.1.4.1.2011.5.25.156.1.11.1.11 | Integer32 (1..16384) | RW | |
column · Integer32 (1..16384) · read-write · current Indicates the maximum number of the PVCs. Only main-interfaces encapsulated with ATM protocol can be set. | ||||
| ChwAtmIfConfOperVccs | 1.3.6.1.4.1.2011.5.25.156.1.11.1.12 | Integer32 | RO | |
column · Integer32 · read-only · current Indicates the number of the configured PVCs. | ||||
| ChwAtmIfConfIntfType | 1.3.6.1.4.1.2011.5.25.156.1.11.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the type of the serial interface with the ATM protocol. Only main-interfaces encapsulated with ATM protocol can be set.
| ||||
| ChwAtmIfConfCellTransfer | 1.3.6.1.4.1.2011.5.25.156.1.11.1.14 | TruthValue | RW | |
column · TruthValue · read-write · current This object indicates whether the cell transfer function is enabled. By default, the cell transfer function is enabled on IMA sub-interfaces and serial sub-interfaces and disabled on other types of interfaces. This object can not be set on IMA sub-interfaces and serial sub-interface. true: enables the cell transfer function. false: disables the cell transfer function. | ||||
| ThwAtmVplTable | 1.3.6.1.4.1.2011.5.25.156.1.12 | NA | ||
table · not-accessible · current Indicates the configuration of the ATM PVP. | ||||
| RhwAtmVplEntry | 1.3.6.1.4.1.2011.5.25.156.1.12.1 | NA | ||
row · not-accessible · current Indicates the configuration of the ATM PVP.
| ||||
| ChwAtmVplIfIndex | 1.3.6.1.4.1.2011.5.25.156.1.12.1.1 | InterfaceIndex | AN | |
column · InterfaceIndex · accessible-for-notify · current Indicates the interface index. | ||||
| ChwAtmVplVpi | 1.3.6.1.4.1.2011.5.25.156.1.12.1.2 | AtmVpIdentifier | AN | |
column · AtmVpIdentifier · accessible-for-notify · current VPI. | ||||
| ChwAtmVplRowStatus | 1.3.6.1.4.1.2011.5.25.156.1.12.1.51 | RowStatus | RC | |
column · RowStatus · read-create · current Indicates the status of the row. | ||||
| ThwAtmVclTable | 1.3.6.1.4.1.2011.5.25.156.1.13 | NA | ||
table · not-accessible · current Indicates the configuration of the ATM PVC. | ||||
| RhwAtmVclEntry | 1.3.6.1.4.1.2011.5.25.156.1.13.1 | NA | ||
row · not-accessible · current Indicates the configuration of the ATM PVC. | ||||
| ChwAtmVclIfIndex | 1.3.6.1.4.1.2011.5.25.156.1.13.1.1 | InterfaceIndex | AN | |
column · InterfaceIndex · accessible-for-notify · current Indicates the interface index. | ||||
| ChwAtmVclVpi | 1.3.6.1.4.1.2011.5.25.156.1.13.1.2 | AtmVpIdentifier | AN | |
column · AtmVpIdentifier · accessible-for-notify · current VPI. | ||||
| ChwAtmVclVci | 1.3.6.1.4.1.2011.5.25.156.1.13.1.3 | AtmVcIdentifier | AN | |
column · AtmVcIdentifier · accessible-for-notify · current VCI. | ||||
| ChwAtmVclName | 1.3.6.1.4.1.2011.5.25.156.1.13.1.11 | OCTET STRING (SIZE (0..16)) | RC | |
column · OCTET STRING (SIZE (0..16)) · read-create · current Indicates the name of the PVC. | ||||
| ChwAtmVccAal5EncapsType | 1.3.6.1.4.1.2011.5.25.156.1.13.1.12 | INTEGER | RC | |
column · INTEGER · read-create · current Indicates the encapsulation mode of AAL5. aal5snap: LLC/SNAP (Logical Link Control (LLC)/Subnet Access Protocol (SNAP)) encapsulation type. aal5mux: MUX encapsulation type. aal5muxnonstandard: nonstandard MUX encapsulation type, which used to interconnect other devices. aal5nlpid: RFC1490 encapsulation type. aal5nlpidietf: RFC1490 encapsulation type, which used to differentiate with aal5nlpid for ISIS. aal5Auto: Auto encapsulation type.
| ||||
| ChwAtmVclRowStatus | 1.3.6.1.4.1.2011.5.25.156.1.13.1.51 | RowStatus | RC | |
column · RowStatus · read-create · current Indicates the status of the row. | ||||
| ChwAtmVclDescr | 1.3.6.1.4.1.2011.5.25.156.1.13.1.52 | OCTET STRING (SIZE (0..128)) | RC | |
column · OCTET STRING (SIZE (0..128)) · read-create · current Indicates the Description of the PVC. | ||||
| ThwAtmPvcIpoaTable | 1.3.6.1.4.1.2011.5.25.156.1.14 | NA | ||
table · not-accessible · current This table is used to configure the IPoA mapping on the PVC. | ||||
| RhwAtmPvcIpoaEntry | 1.3.6.1.4.1.2011.5.25.156.1.14.1 | NA | ||
row · not-accessible · current This table is used to configure the IPoA mapping on the PVC. | ||||
| ChwAtmPvcIpoaType | 1.3.6.1.4.1.2011.5.25.156.1.14.1.3 | INTEGER | NA | |
column · INTEGER · not-accessible · current Indicates the type of the PVC IPoA mapping. ip: sets the peer IP address and mask that are mapped to the PVC. default: configures a mapping with default route attributes. If no mapping of the next hop address of a packet can be found, the packet is sent over the PVC if the PVC is configured with default mapping. inarp: configures InARP on the PVC.
| ||||
| ChwAtmPvcIpoaIpAddress | 1.3.6.1.4.1.2011.5.25.156.1.14.1.4 | IpAddress | NA | |
column · IpAddress · not-accessible · current Indicates the peer IP address mapped to the PVC. | ||||
| ChwAtmPvcIpoaIpMask | 1.3.6.1.4.1.2011.5.25.156.1.14.1.11 | IpAddress | RC | |
column · IpAddress · read-create · current Indicates the IP address mask. The IP address mask is an optional parameter. | ||||
| ChwAtmPvcIpoaInarpInterval | 1.3.6.1.4.1.2011.5.25.156.1.14.1.12 | Integer32 (0 | 1..600) | RC | |
column · Integer32 (0 | 1..600) · read-create · current Indicates the interval for sending InARP packets. The parameter is optional. The value ranges from 1 to 600 in seconds. If the type of the PVC IPoA mapping is IP or default, the value is 0. The default value is 1. | ||||
| ChwAtmPvcIpoaBroadcast | 1.3.6.1.4.1.2011.5.25.156.1.14.1.13 | TruthValue | RC | |
column · TruthValue · read-create · current If a mapping with this attribute is configured on the PVC, broadcast packets on the interface where the PVC resides will be sent over the PVC. | ||||
| ChwAtmPvcIpoaRowStatus | 1.3.6.1.4.1.2011.5.25.156.1.14.1.51 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus. | ||||
| ThwAtmPvcBridgeTable | 1.3.6.1.4.1.2011.5.25.156.1.15 | NA | ||
table · not-accessible · current This table is used to configure the IPoEoA mapping and PPPoEoA mapping on the PVC. | ||||
| RhwAtmPvcBridgeEntry | 1.3.6.1.4.1.2011.5.25.156.1.15.1 | NA | ||
row · not-accessible · current This table is used to configure the IPoEoA mapping and PPPoEoA mapping on the PVC. | ||||
| ChwAtmPvcBridgeDstIfIndex | 1.3.6.1.4.1.2011.5.25.156.1.15.1.11 | InterfaceIndexOrZero | RC | |
column · InterfaceIndexOrZero · read-create · current Indicates the index of the VE interface. | ||||
| ChwAtmPvcBridgeBroadcast | 1.3.6.1.4.1.2011.5.25.156.1.15.1.12 | TruthValue | RC | |
column · TruthValue · read-create · current Indicates the PVC can forward bridge packets. | ||||
| ChwAtmPvcBridgeRowStatus | 1.3.6.1.4.1.2011.5.25.156.1.15.1.51 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus. Only 'createAndGo' and 'destroy' is supported. | ||||
| ThwAtmPvcPppTable | 1.3.6.1.4.1.2011.5.25.156.1.16 | NA | ||
table · not-accessible · current This table is used to configure the PPPoA mapping on the PVC. | ||||
| RhwAtmPvcPppEntry | 1.3.6.1.4.1.2011.5.25.156.1.16.1 | NA | ||
row · not-accessible · current This table is used to configure the PPPoA mapping on the PVC. | ||||
| ChwAtmPvcPppDstIfIndex | 1.3.6.1.4.1.2011.5.25.156.1.16.1.11 | InterfaceIndex | RC | |
column · InterfaceIndex · read-create · current Indicates the index of the VT or dialer interface. | ||||
| ChwAtmPvcPppServer | 1.3.6.1.4.1.2011.5.25.156.1.16.1.12 | TruthValue | RC | |
column · TruthValue · read-create · current Indicates the node is server or not. By default, the node is not server. true: indicates the node is server. false: indicates the node is not server. | ||||
| ChwAtmPvcPppRowStatus | 1.3.6.1.4.1.2011.5.25.156.1.16.1.51 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus. Only 'createAndGo' and 'destroy' is supported. | ||||
| ThwAtmPvcOAMLoopbackTable | 1.3.6.1.4.1.2011.5.25.156.1.17 | NA | ||
table · not-accessible · current This table is used to configure OAM F5 Loopback, enable the sending of OAM F5 Loopback cells, and configure the parameters of the retransmission check or modify the parameters of the retransmission check. | ||||
| RhwAtmPvcOAMLoopbackEntry | 1.3.6.1.4.1.2011.5.25.156.1.17.1 | NA | ||
row · not-accessible · current This table is used to configure OAM F5 Loopback. | ||||
| ChwAtmPvcOAMLoopbackFrequency | 1.3.6.1.4.1.2011.5.25.156.1.17.1.11 | Integer32 (1..600) | RC | |
column · Integer32 (1..600) · read-create · current Indicates the interval for sending OAM F5 Loopback cells. | ||||
| ChwAtmPvcOAMLoopbackUpCount | 1.3.6.1.4.1.2011.5.25.156.1.17.1.12 | Integer32 (1..600) | RC | |
column · Integer32 (1..600) · read-create · current Indicates the number of continuous OAM F5 Loopback cells that must be received before the PVC turns Up. | ||||
| ChwAtmPvcOAMLoopbackDownCount | 1.3.6.1.4.1.2011.5.25.156.1.17.1.13 | Integer32 (1..600) | RC | |
column · Integer32 (1..600) · read-create · current Indicates the number of continuous OAM F5 Loopback cells that are not received before the PVC turns Down. | ||||
| ChwAtmPvcOAMLoopbackRetryFrequency | 1.3.6.1.4.1.2011.5.25.156.1.17.1.14 | Integer32 (1..1000) | RC | |
column · Integer32 (1..1000) · read-create · current Indicates the interval for sending cells during OAM F5 Loopback retransmission verification before the PVC status changes. | ||||
| ChwAtmPvcOAMLoopbackRowStatus | 1.3.6.1.4.1.2011.5.25.156.1.17.1.51 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus | ||||
| ThwAtmPvpLimitTable | 1.3.6.1.4.1.2011.5.25.156.1.18 | NA | ||
table · not-accessible · current This table is used to configure the VP limit. To monitor the VP, configure related VP parameters. | ||||
| RhwAtmPvpLimitEntry | 1.3.6.1.4.1.2011.5.25.156.1.18.1 | NA | ||
row · not-accessible · current This table is used to configure the VP limit. | ||||
| ChwAtmPvpLimitIfIndex | 1.3.6.1.4.1.2011.5.25.156.1.18.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Indicates the interface index. | ||||
| ChwAtmPvpLimitVpi | 1.3.6.1.4.1.2011.5.25.156.1.18.1.2 | AtmVpIdentifier | NA | |
column · AtmVpIdentifier · not-accessible · current VPI. | ||||
| ChwAtmPvpLimitPeakRate | 1.3.6.1.4.1.2011.5.25.156.1.18.1.11 | Integer32 | RC | |
column · Integer32 · read-create · current VCI. | ||||
| ChwAtmPvpLimitRowStatus | 1.3.6.1.4.1.2011.5.25.156.1.18.1.51 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus. | ||||
| ThwAtmPvcGroupTable | 1.3.6.1.4.1.2011.5.25.156.1.19 | NA | ||
table · not-accessible · current This table is used to create or delete the pvc-group, and get the TOS type or state of the pvc-group. | ||||
| RhwAtmPvcGroupEntry | 1.3.6.1.4.1.2011.5.25.156.1.19.1 | NA | ||
row · not-accessible · current This table is used to create or delete the pvc-group, and get the TOS type or state of the pvc-group. | ||||
| ChwAtmPvcGroupTosType | 1.3.6.1.4.1.2011.5.25.156.1.19.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates the TOS type. The default value is 1.
| ||||
| ChwAtmPvcGroupState | 1.3.6.1.4.1.2011.5.25.156.1.19.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates the state of the pvc-group.
| ||||
| ChwAtmPvcGroupName | 1.3.6.1.4.1.2011.5.25.156.1.19.1.3 | OCTET STRING (SIZE (0..16)) | RO | |
column · OCTET STRING (SIZE (0..16)) · read-only · current Indicates the name of the pvc-group. Only support visible characters. | ||||
| ChwAtmPvcGroupRowStatus | 1.3.6.1.4.1.2011.5.25.156.1.19.1.51 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus. Only 'createAndGo' and 'destroy' is supported. | ||||
| ThwAtmPvcGroupMemTable | 1.3.6.1.4.1.2011.5.25.156.1.20 | NA | ||
table · not-accessible · current This table is used to configure the member PVC and TOS type and TOS type value on the pvc-group. | ||||
| RhwAtmPvcGroupMemEntry | 1.3.6.1.4.1.2011.5.25.156.1.20.1 | NA | ||
row · not-accessible · current This table is used to configure the member PVC and TOS type and TOS type value on the pvc-group. | ||||
| ChwAtmPvcGroupMemVpi | 1.3.6.1.4.1.2011.5.25.156.1.20.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current Indicates the VPI of the member PVC in pvc-group. | ||||
| ChwAtmPvcGroupMemVci | 1.3.6.1.4.1.2011.5.25.156.1.20.1.2 | Integer32 | NA | |
column · Integer32 · not-accessible · current Indicates the VCI of the member PVC in pvc-group. | ||||
| ChwAtmPvcGroupMemName | 1.3.6.1.4.1.2011.5.25.156.1.20.1.3 | OCTET STRING (SIZE (0..16)) | RC | |
column · OCTET STRING (SIZE (0..16)) · read-create · current Indicates the name of the member PVC of the pvc-group. Only support visible characters. | ||||
| ChwAtmPvcGroupMemMinGrade | 1.3.6.1.4.1.2011.5.25.156.1.20.1.4 | Integer32 (0..63 | 255) | RC | |
column · Integer32 (0..63 | 255) · read-create · current Indicates the minimum value of the TOS with one member PVC. If the TOS type is precedence, the maximum value cannot be larger than 7. Return 255 when this value is not configed. | ||||
| ChwAtmPvcGroupMemMaxGrade | 1.3.6.1.4.1.2011.5.25.156.1.20.1.5 | Integer32 (0..63 | 255) | RC | |
column · Integer32 (0..63 | 255) · read-create · current Indicates the maximum value of the TOS with one member PVC. If the TOS type is precedence, the maximum value cannot be larger than 7. Return 255 when this value is not configed. | ||||
| ChwAtmPvcGroupMemDefault | 1.3.6.1.4.1.2011.5.25.156.1.20.1.6 | TruthValue | RC | |
column · TruthValue · read-create · current Indicates the PVC is default PVC or not. By default, the default TOS is disabled. true: with default. false: without default. | ||||
| ChwAtmPvcGroupMemTosType | 1.3.6.1.4.1.2011.5.25.156.1.20.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current Indicates the TOS type. The default value is 1.
| ||||
| ChwAtmPvcGroupMemRowStatus | 1.3.6.1.4.1.2011.5.25.156.1.20.1.51 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus. Only 'createAndGo' and 'destroy' is supported. | ||||
| ThwAtmPvcDynamicTable | 1.3.6.1.4.1.2011.5.25.156.1.21 | NA | ||
table · not-accessible · current This table is used to configure the auto PVC. | ||||
| RhwAtmPvcDynamicEntry | 1.3.6.1.4.1.2011.5.25.156.1.21.1 | NA | ||
row · not-accessible · current This table is used to configure the auto PVC. | ||||
| ChwAtmPvcDynamicIfIndex | 1.3.6.1.4.1.2011.5.25.156.1.21.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Indicates the index of ATM interface which support auto PVC. | ||||
| ChwAtmPvcDynamicStartVpi | 1.3.6.1.4.1.2011.5.25.156.1.21.1.2 | AtmVpIdentifier | NA | |
column · AtmVpIdentifier · not-accessible · current The start VPI of auto PVC. | ||||
| ChwAtmPvcDynamicStartVci | 1.3.6.1.4.1.2011.5.25.156.1.21.1.3 | AtmVcIdentifier | NA | |
column · AtmVcIdentifier · not-accessible · current The start VCI of auto PVC. | ||||
| ChwAtmPvcDynamicEndVpi | 1.3.6.1.4.1.2011.5.25.156.1.21.1.4 | AtmVpIdentifier | NA | |
column · AtmVpIdentifier · not-accessible · current The end VPI of auto PVC. | ||||
| ChwAtmPvcDynamicEndVci | 1.3.6.1.4.1.2011.5.25.156.1.21.1.5 | AtmVcIdentifier | NA | |
column · AtmVcIdentifier · not-accessible · current The end VCI of auto PVC. | ||||
| ChwAtmPvcDynamicAdminStatus | 1.3.6.1.4.1.2011.5.25.156.1.21.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current Indicates the administrative status of auto PVC.
| ||||
| ChwAtmPvcDynamicAal5EncapsType | 1.3.6.1.4.1.2011.5.25.156.1.21.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current Indicates the encapsulation mode of AAL5. aal5snap: LLC/SNAP (Logical Link Control (LLC)/Subnet Access Protocol (SNAP)) encapsulation type. aal5mux: MUX encapsulation type. aal5muxnonstandard: nonstandard MUX encapsulation type, which used to interconnect other devices. aal5nlpid: RFC1490 encapsulation type. aal5nlpidietf: RFC1490 encapsulation type, which used to differentiate with aal5nlpid for ISIS. aal5Auto: Auto encapsulation type.
| ||||
| ChwAtmPvcDynamicRowStatus | 1.3.6.1.4.1.2011.5.25.156.1.21.1.8 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus. Only 'createAndGo' and 'destroy' is supported. | ||||
| ThwAtmPvcDynamicPppTable | 1.3.6.1.4.1.2011.5.25.156.1.22 | NA | ||
table · not-accessible · current This table is used to configure the map PPP on auto PVC. | ||||
| RhwAtmPvcDynamicPppEntry | 1.3.6.1.4.1.2011.5.25.156.1.22.1 | NA | ||
row · not-accessible · current This table is used to configure the map PPP on auto PVC. | ||||
| ChwAtmPvcDynamicPppDstIfIndex | 1.3.6.1.4.1.2011.5.25.156.1.22.1.1 | InterfaceIndex | RC | |
column · InterfaceIndex · read-create · current Indicates the index of the VT interface. | ||||
| ChwAtmPvcDynamicPppRowStatus | 1.3.6.1.4.1.2011.5.25.156.1.22.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus. Only 'createAndGo' and 'destroy' is supported. | ||||
| ThwAtmPvcDynamicBridgeTable | 1.3.6.1.4.1.2011.5.25.156.1.23 | NA | ||
table · not-accessible · current This table is used to configure the map bridge on auto PVC. | ||||
| RhwAtmPvcDynamicBridgeEntry | 1.3.6.1.4.1.2011.5.25.156.1.23.1 | NA | ||
row · not-accessible · current This table is used to configure the map bridge on auto PVC. | ||||
| ChwAtmPvcDynamicBridgeDstIfIndex | 1.3.6.1.4.1.2011.5.25.156.1.23.1.1 | InterfaceIndex | RC | |
column · InterfaceIndex · read-create · current Indicates the index of the VE interface. | ||||
| ChwAtmPvcDynamicBridgeRowStatus | 1.3.6.1.4.1.2011.5.25.156.1.23.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus. Only 'createAndGo' and 'destroy' is supported. | ||||
| ThwAtmTrunkTable | 1.3.6.1.4.1.2011.5.25.156.1.24 | NA | ||
table · not-accessible · current This table is used to configure the parameters of the atm trunk interface. | ||||
| RhwAtmTrunkEntry | 1.3.6.1.4.1.2011.5.25.156.1.24.1 | NA | ||
row · not-accessible · current This table is used to configure the parameters of the atm trunk interface.
| ||||
| ChwAtmTrunkIfIndex | 1.3.6.1.4.1.2011.5.25.156.1.24.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Indicates the interface index. | ||||
| ChwAtmTrunkWorkMode | 1.3.6.1.4.1.2011.5.25.156.1.24.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates the work mode of atm trunk.
| ||||
| ThwAtmVpcConnectivityTestTable | 1.3.6.1.4.1.2011.5.25.156.1.25 | NA | ||
table · not-accessible · current Description. | ||||
| RhwAtmVpcConnectivityTestEntry | 1.3.6.1.4.1.2011.5.25.156.1.25.1 | NA | ||
row · not-accessible · current Description. | ||||
| ChwAtmVpcConnectivityTestIfIndex | 1.3.6.1.4.1.2011.5.25.156.1.25.1.1 | InterfaceIndex | AN | |
column · InterfaceIndex · accessible-for-notify · current Indicates the interface index. | ||||
| ChwAtmVpcConnectivityTestVpi | 1.3.6.1.4.1.2011.5.25.156.1.25.1.2 | AtmVpIdentifier | AN | |
column · AtmVpIdentifier · accessible-for-notify · current VPI. | ||||
| ChwAtmVpcConnectivityTestLLID | 1.3.6.1.4.1.2011.5.25.156.1.25.1.3 | DisplayString | AN | |
column · DisplayString · accessible-for-notify · current Loopback Local Identify. | ||||
| ChwAtmVpcConnectivityTestResult | 1.3.6.1.4.1.2011.5.25.156.1.25.1.4 | Integer32 | AN | |
column · Integer32 · accessible-for-notify · current Indicates the result of the test. | ||||
| ChwAtmVpcConnectivityTestIfName | 1.3.6.1.4.1.2011.5.25.156.1.25.1.5 | DisplayString | AN | |
column · DisplayString · accessible-for-notify · current Indicates the interface name. | ||||
| ChwAtmVpcConnectivityTestRowStatus | 1.3.6.1.4.1.2011.5.25.156.1.25.1.51 | RowStatus | RC | |
column · RowStatus · read-create · current Indicates the status of the row. | ||||
| ThwAtmVccConnectivityTestTable | 1.3.6.1.4.1.2011.5.25.156.1.26 | NA | ||
table · not-accessible · current Description. | ||||
| RhwAtmVccConnectivityTestEntry | 1.3.6.1.4.1.2011.5.25.156.1.26.1 | NA | ||
row · not-accessible · current Description. | ||||
| ChwAtmVccConnectivityTestIfIndex | 1.3.6.1.4.1.2011.5.25.156.1.26.1.1 | InterfaceIndex | AN | |
column · InterfaceIndex · accessible-for-notify · current Indicates the interface index. | ||||
| ChwAtmVccConnectivityTestVpi | 1.3.6.1.4.1.2011.5.25.156.1.26.1.2 | AtmVpIdentifier | AN | |
column · AtmVpIdentifier · accessible-for-notify · current VPI. | ||||
| ChwAtmVccConnectivityTestVci | 1.3.6.1.4.1.2011.5.25.156.1.26.1.3 | AtmVcIdentifier | AN | |
column · AtmVcIdentifier · accessible-for-notify · current VCI. | ||||
| ChwAtmVccConnectivityTestLLID | 1.3.6.1.4.1.2011.5.25.156.1.26.1.4 | DisplayString | AN | |
column · DisplayString · accessible-for-notify · current Loopback Local Identify. | ||||
| ChwAtmVccConnectivityTestResult | 1.3.6.1.4.1.2011.5.25.156.1.26.1.5 | Integer32 | AN | |
column · Integer32 · accessible-for-notify · current Indicates the result of the test. | ||||
| ChwAtmVccConnectivityTestIfName | 1.3.6.1.4.1.2011.5.25.156.1.26.1.6 | DisplayString | AN | |
column · DisplayString · accessible-for-notify · current Indicates the interface name. | ||||
| ChwAtmVccConnectivityTestRowStatus | 1.3.6.1.4.1.2011.5.25.156.1.26.1.51 | RowStatus | RC | |
column · RowStatus · read-create · current Indicates the status of the row. | ||||
| ThwAtmPvcQueueStatisticTable | 1.3.6.1.4.1.2011.5.25.156.1.27 | NA | ||
table · not-accessible · current This table is used to configure pvc-queue statistic including outputPackets, outputBytes and outputDropPackets. | ||||
| RhwAtmPvcQueueStatisticEntry | 1.3.6.1.4.1.2011.5.25.156.1.27.1 | NA | ||
row · not-accessible · current This table is used to configure pvc-queue statistic including outputPackets, outputBytes and outputDropPackets. | ||||
| ChwAtmPvcQueueStatisticIfIndex | 1.3.6.1.4.1.2011.5.25.156.1.27.1.1 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current This object indicates the interface index. | ||||
| ChwAtmPvcQueueStatisticVpi | 1.3.6.1.4.1.2011.5.25.156.1.27.1.2 | AtmVpIdentifier | RO | |
column · AtmVpIdentifier · read-only · current This object indicates the virtual path identifier (VPI) of ATM. The value is an integer. For a UNI, the value ranges from 0 to 255. For an NNI, the value ranges from 0 to 4095. | ||||
| ChwAtmPvcQueueStatisticVci | 1.3.6.1.4.1.2011.5.25.156.1.27.1.3 | AtmVcIdentifier | RO | |
column · AtmVcIdentifier · read-only · current This object indicates the virtual channel identifier (VCI) of ATM. | ||||
| ChwAtmPvcQueueStatisticQueueIndex | 1.3.6.1.4.1.2011.5.25.156.1.27.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the queue priority.
| ||||
| ChwAtmPvcQueueStatisticReset | 1.3.6.1.4.1.2011.5.25.156.1.27.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates cleared statistics.
| ||||
| ChwAtmPvcQueueStatisticTxPks | 1.3.6.1.4.1.2011.5.25.156.1.27.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the number of sent packets. | ||||
| ChwAtmPvcQueueStatisticTxBytes | 1.3.6.1.4.1.2011.5.25.156.1.27.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the number of sent bytes. | ||||
| ChwAtmPvcQueueStatisticTxDropPks | 1.3.6.1.4.1.2011.5.25.156.1.27.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the number of discarded sent packets. | ||||
| NhwAtmNotification | 1.3.6.1.4.1.2011.5.25.156.2 | |||
| NhwVplTrap | 1.3.6.1.4.1.2011.5.25.156.2.1 | |||
| !hwAtmVpcConnectivityTestResultNotify | 1.3.6.1.4.1.2011.5.25.156.2.1.1 | |||
notification · current This object indicates that the connectivity test on ATM VPC services is ended. | ||||
| NhwVclTrap | 1.3.6.1.4.1.2011.5.25.156.2.2 | |||
| !hwAtmVccConnectivityTestResultNotify | 1.3.6.1.4.1.2011.5.25.156.2.2.1 | |||
notification · current This object indicates that the connectivity test on ATM VCC services is ended. | ||||
| NhwAtmConformance | 1.3.6.1.4.1.2011.5.25.156.11 | |||
| NhwAtmCompliances | 1.3.6.1.4.1.2011.5.25.156.11.1 | |||
| MhwAtmCompliance | 1.3.6.1.4.1.2011.5.25.156.11.1.1 | |||
compliance · current The compliance statement for systems supporting the HUAWEI-ATM-MIB.
| ||||
| NhwAtmGroups | 1.3.6.1.4.1.2011.5.25.156.11.2 | |||
| GhwAtmObjectGroup | 1.3.6.1.4.1.2011.5.25.156.11.2.1 | |||
group · current The Atm attribute group. | ||||
| GhwAtmIfConf | 1.3.6.1.4.1.2011.5.25.156.11.2.2 | |||
group · current Description. | ||||
| GhwAtmVplObjectGroup | 1.3.6.1.4.1.2011.5.25.156.11.2.3 | |||
group · current The ATM PVC bridge attribute group. | ||||
| GhwAtmVclObjectGroup | 1.3.6.1.4.1.2011.5.25.156.11.2.4 | |||
group · current Description. | ||||
| GhwAtmMapPvpObjectGroup | 1.3.6.1.4.1.2011.5.25.156.11.2.5 | |||
group · current The ATM map PVP attribute group. | ||||
| GhwAtmMapPvcObjectGroup | 1.3.6.1.4.1.2011.5.25.156.11.2.6 | |||
group · current The ATM map PVC attribute group. | ||||
| GhwAtmServiceObjectGroup | 1.3.6.1.4.1.2011.5.25.156.11.2.7 | |||
group · current The ATM service attribute group. | ||||
| GhwAtmPvcServiceObjectGroup | 1.3.6.1.4.1.2011.5.25.156.11.2.8 | |||
group · current The ATM PVC service attribute group. | ||||
| GhwAtmPvcIpoaObjectGroup | 1.3.6.1.4.1.2011.5.25.156.11.2.9 | |||
group · current The ATM PVC IPOA attribute group. | ||||
| GhwAtmPvcBridgeObjectGroup | 1.3.6.1.4.1.2011.5.25.156.11.2.10 | |||
| GhwAtmPvcOAMLoopbackObjectGroup | 1.3.6.1.4.1.2011.5.25.156.11.2.11 | |||
group · current The port attribute group. | ||||
| GhwAtmPvpLimitObjectGroup | 1.3.6.1.4.1.2011.5.25.156.11.2.12 | |||
| GhwAtmPvcDynamicObjectGroup | 1.3.6.1.4.1.2011.5.25.156.11.2.13 | |||
group · current The ATM any other PVC attribute group. | ||||
| GhwAtmPvcDynamicPppObjectGroup | 1.3.6.1.4.1.2011.5.25.156.11.2.14 | |||
group · current The ATM any other map PPP attribute group. | ||||
| GhwAtmPvcDynamicBridgeObjectGroup | 1.3.6.1.4.1.2011.5.25.156.11.2.15 | |||
group · current The ATM any other map bridge attribute group. | ||||
| GhwAtmVpcVccConnectivityTestTrapGroup | 1.3.6.1.4.1.2011.5.25.156.11.2.16 | |||
group · current Description. | ||||
| GhwAtmVpVcTrapGroup | 1.3.6.1.4.1.2011.5.25.156.11.2.17 | |||
group · current Description. | ||||
| GhwAtmAlarmObjectGroup | 1.3.6.1.4.1.2011.5.25.156.11.2.18 | |||
| NhwAtmTraps | 1.3.6.1.4.1.2011.5.25.156.12 | |||
| !hwVpAis | 1.3.6.1.4.1.2011.5.25.156.12.1 | |||
notification · current The AIS alarm of the VP is found.
| ||||
| !hwVpAisResume | 1.3.6.1.4.1.2011.5.25.156.12.2 | |||
notification · current The AIS alarm of the VP is cancelled.
| ||||
| !hwVpRdi | 1.3.6.1.4.1.2011.5.25.156.12.3 | |||
notification · current The RDI alarm of the VP is found.
| ||||
| !hwVpRdiResume | 1.3.6.1.4.1.2011.5.25.156.12.4 | |||
notification · current The RDI alarm of the VP is cancelled.
| ||||
| !hwVcAis | 1.3.6.1.4.1.2011.5.25.156.12.5 | |||
notification · current The AIS alarm of the VC is found.
| ||||
| !hwVcAisResume | 1.3.6.1.4.1.2011.5.25.156.12.6 | |||
notification · current The AIS alarm of the VC is cancelled.
| ||||
| !hwVcRdi | 1.3.6.1.4.1.2011.5.25.156.12.7 | |||
notification · current The RDI alarm of the VC is found.
| ||||
| !hwVcRdiResume | 1.3.6.1.4.1.2011.5.25.156.12.8 | |||
notification · current The RDI alarm of the VC is cancelled.
| ||||
| !hwVpLoc | 1.3.6.1.4.1.2011.5.25.156.12.9 | |||
notification · current The CC-LOC alarm of the VP is found.
| ||||
| !hwVpLocResume | 1.3.6.1.4.1.2011.5.25.156.12.10 | |||
notification · current The CC-LOC alarm of the VP is cancelled.
| ||||
| !hwVcLoc | 1.3.6.1.4.1.2011.5.25.156.12.11 | |||
notification · current The CC-LOC alarm of the VC is found.
| ||||
| !hwVcLocResume | 1.3.6.1.4.1.2011.5.25.156.12.12 | |||
notification · current The CC-LOC alarm of the VC is cancelled.
| ||||
| !hwNoAtmResourceAlarmTrap | 1.3.6.1.4.1.2011.5.25.156.12.13 | |||
notification · current When ATM resources of the system are insufficient, this trap will be generated.
| ||||
| ShwOamAlmDirection | 1.3.6.1.4.1.2011.5.25.156.13 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current The direction of alarm such as ais, rdi, cc-loc, the value of directon is forward or backward. | ||||
Traps / Notifications
- hwAtmVccConnectivityTestResultNotify
1.3.6.1.4.1.2011.5.25.156.2.2.1 - hwAtmVpcConnectivityTestResultNotify
1.3.6.1.4.1.2011.5.25.156.2.1.1 - hwNoAtmResourceAlarmTrap
1.3.6.1.4.1.2011.5.25.156.12.13 - hwVcAis
1.3.6.1.4.1.2011.5.25.156.12.5 - hwVcAisResume
1.3.6.1.4.1.2011.5.25.156.12.6 - hwVcLoc
1.3.6.1.4.1.2011.5.25.156.12.11 - hwVcLocResume
1.3.6.1.4.1.2011.5.25.156.12.12 - hwVcRdi
1.3.6.1.4.1.2011.5.25.156.12.7 - hwVcRdiResume
1.3.6.1.4.1.2011.5.25.156.12.8 - hwVpAis
1.3.6.1.4.1.2011.5.25.156.12.1 - hwVpAisResume
1.3.6.1.4.1.2011.5.25.156.12.2 - hwVpLoc
1.3.6.1.4.1.2011.5.25.156.12.9 - hwVpLocResume
1.3.6.1.4.1.2011.5.25.156.12.10 - hwVpRdi
1.3.6.1.4.1.2011.5.25.156.12.3 - hwVpRdiResume
1.3.6.1.4.1.2011.5.25.156.12.4
Groups and compliance
- hwAtmAlarmObjectGroup
- hwAtmCompliance
- hwAtmIfConf
- hwAtmMapPvcObjectGroup
- hwAtmMapPvpObjectGroup
- hwAtmObjectGroup
- hwAtmPvcBridgeObjectGroup
- hwAtmPvcDynamicBridgeObjectGroup
- hwAtmPvcDynamicObjectGroup
- hwAtmPvcDynamicPppObjectGroup
- hwAtmPvcIpoaObjectGroup
- hwAtmPvcOAMLoopbackObjectGroup
- hwAtmPvcServiceObjectGroup
- hwAtmPvpLimitObjectGroup
- hwAtmServiceObjectGroup
- hwAtmVclObjectGroup
- hwAtmVpVcTrapGroup
- hwAtmVpcVccConnectivityTestTrapGroup
- hwAtmVplObjectGroup