HUAWEI-ACL-MIB
HUAWEI Technology Co.,LtdThe HUAWEI-ACL-MIB contains objects to configure ACL module, including ACL group, rule and acl accelerate, and query the current ACL configuration and status. This MIB module objects indicate hwAclNumGroupTable, hwAclBasicRuleTable, hwAclAdvanceRuleTable, hwAclIfRuleTable, hwAclEthernetFrameRuleTable, hwAclIpv6BasicRuleTable, hwAclIpv6AdvanceRuleTable, hwAclIpv6IfRuleTable, hwAclCompileEnableFlag, hwAclCompileNumGroupTable, hwAclIpv6NumGroupTable and acl trap. To filter data packets, a series of rules need to be configured on the device. These rules are defined by ACL (Access Control List), which are a series of sequential rules consisting of rule permit or deny statements. The rules are described by source address, destination address and port number of data packets. ACL classifies data packets through these device interface applied rules, by which the device decides which packets can be received and which should be rejected.
snmptranslate -m HUAWEI-ACL-MIB -Tpsnmpwalk -v2c -c <community> -m HUAWEI-ACL-MIB <host> 1.3.6.1.4.1.2011.5.1Imports
| HUAWEI-MIB | huaweiMgmt |
|---|---|
| IPV6-TC | Ipv6Address |
| P-BRIDGE-MIB | EnabledStatus |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IhwAcl | 1.3.6.1.4.1.2011.5.1 | |||
identity The HUAWEI-ACL-MIB contains objects to configure ACL module, including ACL group, rule and acl accelerate, and query the current ACL configuration and status. This MIB module objects indicate hwAclNumGroupTable, hwAclBasicRuleTable, hwAclAdvanceRuleTable, hwAclIfRuleTable, hwAclEthernetFrameRuleTable, hwAclIpv6BasicRuleTable, hwAclIpv6AdvanceRuleTable, hwAclIpv6IfRuleTable, hwAclCompileEnableFlag, hwAclCompileNumGroupTable, hwAclIpv6NumGroupTable and acl trap. To filter data packets, a series of rules need to be configured on the device. These rules are defined by ACL (Access Control List), which are a series of sequential rules consisting of rule permit or deny statements. The rules are described by source address, destination address and port number of data packets. ACL classifies data packets through these device interface applied rules, by which the device decides which packets can be received and which should be rejected. | ||||
| NhwAclMibObjects | 1.3.6.1.4.1.2011.5.1.1 | |||
| ThwAclNumGroupTable | 1.3.6.1.4.1.2011.5.1.1.2 | NA | ||
table · not-accessible · current This table is used to query information about an ACL rule group, including the ACL configuration order, step length, and description. | ||||
| RhwAclNumGroupEntry | 1.3.6.1.4.1.2011.5.1.1.2.1 | NA | ||
row · not-accessible · current An entry containing characters of an acl group
| ||||
| ChwAclNumGroupAclNum | 1.3.6.1.4.1.2011.5.1.1.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of acl group, identifying an ACL. The object specifies the range of an ACL number. | ||||
| ChwAclNumGroupMatchOrder | 1.3.6.1.4.1.2011.5.1.1.2.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current The object indicates the match order of rules. 'config' means matching ACL rules in the configuration sequence, 'auto' means the ACL rules are matched following the 'Depth-first' principle.
| ||||
| ChwAclNumGroupSubitemNum | 1.3.6.1.4.1.2011.5.1.1.2.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of the rules in the acl group. | ||||
| ChwAclNumGroupStep | 1.3.6.1.4.1.2011.5.1.1.2.1.4 | Integer32 (1..20) | RC | |
column · Integer32 (1..20) · read-create · current The object indicates the step value of number acl. Step here refers to the difference between each ID. For instance, given the step is set to 5, the IDs are the multiples of 5 beginning with 5. The ACL IDs change along with the step. When the step is 5, the ACL IDs are 5, 10, and 15 and so on. However, when the step is set to 2, the IDs turn to 2, 4, and 6 and so on. | ||||
| ChwAclNumGroupDescription | 1.3.6.1.4.1.2011.5.1.1.2.1.5 | OCTET STRING (SIZE (0..127)) | RC | |
column · OCTET STRING (SIZE (0..127)) · read-create · current This object indicates the description of a rule group. The description length cannot exceed 127 characters. | ||||
| ChwAclNumGroupCountClear | 1.3.6.1.4.1.2011.5.1.1.2.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current The value of this object identifies whether to clear up the count of rule groups. The value can be: cleared(1) notUsed(2) This field is effective only when you perform the Set operation to this object.
| ||||
| ChwAclNumGroupRowStatus | 1.3.6.1.4.1.2011.5.1.1.2.1.7 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus, Now support three value: CreateAndGo, Active, Destroy. | ||||
| ChwAclNumGroupAclName | 1.3.6.1.4.1.2011.5.1.1.2.1.8 | OCTET STRING (SIZE (0..64)) | RC | |
column · OCTET STRING (SIZE (0..64)) · read-create · current The object indicates the name of an acl group, The first character must be start with a to z or A to Z, and the length cannot exceed 64 character. | ||||
| ChwAclNumGroupAclType | 1.3.6.1.4.1.2011.5.1.1.2.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current The type of ACL group.
| ||||
| ThwAclBasicRuleTable | 1.3.6.1.4.1.2011.5.1.1.4 | NA | ||
table · not-accessible · current Configure the rule for basic acl group. | ||||
| RhwAclBasicRuleEntry | 1.3.6.1.4.1.2011.5.1.1.4.1 | NA | ||
row · not-accessible · current Each entry is a rule of basic acl. | ||||
| ChwAclBasicAclNum | 1.3.6.1.4.1.2011.5.1.1.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of basic acl group, the index range is (1..99 | 2000..2999 | 42768..76535). | ||||
| ChwAclBasicSubitem | 1.3.6.1.4.1.2011.5.1.1.4.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The objects specifies the number of an ACL rule. If the number specified has been assigned to an ACL rule, the new rule will overwrite the old one, which is equal to editing the old rule. If the number is not assigned, the system will define a rule with the number and insert it to the place corresponding to its number. If no number is specified, the system will define a rule, assign a number to it and add it into the ACL. It will be placed at the end of the ACL when configuration sequence is adopted; otherwise, it will be placed based on the 'Depth-first' principle. When ACL rules are following the 'Depth-first' principle, the number of an ACL rule must be given 0, but it will be assigned by step automatically; otherwise, this rule will not be created. | ||||
| ChwAclBasicAct | 1.3.6.1.4.1.2011.5.1.1.4.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current The object indicates the action of a basic acl rule. 'deny' means discarding the packets that meet the condition, 'permit' means permitting the packets that meet the condition.
| ||||
| ChwAclBasicSrcIp | 1.3.6.1.4.1.2011.5.1.1.4.1.4 | IpAddress | RC | |
column · IpAddress · read-create · current The object indicates the source IP-address of a basic acl rule. | ||||
| ChwAclBasicSrcWild | 1.3.6.1.4.1.2011.5.1.1.4.1.5 | IpAddress | RC | |
column · IpAddress · read-create · current The value of this object identifies the wildcard mask of the source IP address. The value ranges from 0.0.0.0 to 255.255.255.255. | ||||
| ChwAclBasicTimeRangeIndex | 1.3.6.1.4.1.2011.5.1.1.4.1.6 | Integer32 (0..256) | RC | |
column · Integer32 (0..256) · read-create · current The value of this object identifies the index of a time range of an ACL rule. The value ranges from 0 to 256. The value 0 is invalid, indicating that no time range is specified for the rule. | ||||
| ChwAclBasicFragments | 1.3.6.1.4.1.2011.5.1.1.4.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current The object indicates the type of the packet.
0: fragmentSubseq, indicating that the packet is a subsequent fragment
1: fragment, indicating that the packet is a fragment
2: nonFragment, indicating that the packet is not a fragment
3: nonSubseq, indicating that the packet is not a subsequent fragment
4: fragmentSpeFirst, indicating that the packet is the first fragment
255: none, invalid value
This object cannot be modified once a rule is created.
| ||||
| ChwAclBasicLog | 1.3.6.1.4.1.2011.5.1.1.4.1.8 | TruthValue | RC | |
column · TruthValue · read-create · current The object indicates whether to log the matched packets. The log contents include sequence number of ACL rule, packets passed or discarded, upper layer protocol type over IP, source/destination address, source/destination port number, and number of packets. | ||||
| ChwAclBasicEnable | 1.3.6.1.4.1.2011.5.1.1.4.1.9 | TruthValue | RO | |
column · TruthValue · read-only · current The object indicates whether the rule is valid or invalid. | ||||
| ChwAclBasicCount | 1.3.6.1.4.1.2011.5.1.1.4.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current The object indicates the statistics of matched packets by the rule. | ||||
| ChwAclBasicVrfName | 1.3.6.1.4.1.2011.5.1.1.4.1.11 | OCTET STRING (SIZE (0..31)) | RC | |
column · OCTET STRING (SIZE (0..31)) · read-create · current This object indicates an VPN instance. The length of a VPN instance name cannot exceed 31 characters. | ||||
| ChwAclBasicRowStatus | 1.3.6.1.4.1.2011.5.1.1.4.1.12 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus, Now support three value: CreateAndGo, Active and Destroy. | ||||
| ChwAclBasicDescription | 1.3.6.1.4.1.2011.5.1.1.4.1.13 | OCTET STRING (SIZE (0..127)) | RC | |
column · OCTET STRING (SIZE (0..127)) · read-create · current The object indicates the description of this basic rule. The object describes the usage of an ACL with a word or a sentence. | ||||
| ChwAclBasicVrfAny | 1.3.6.1.4.1.2011.5.1.1.4.1.14 | TruthValue | RC | |
column · TruthValue · read-create · current The object indicates whether or not matching any VPN-instance. | ||||
| ThwAclAdvancedRuleTable | 1.3.6.1.4.1.2011.5.1.1.5 | NA | ||
table · not-accessible · current Configure the rule for advanced acl group. | ||||
| RhwAclAdvancedRuleEntry | 1.3.6.1.4.1.2011.5.1.1.5.1 | NA | ||
row · not-accessible · current Each entry contains a rule of advanced acl group. | ||||
| ChwAclAdvancedAclNum | 1.3.6.1.4.1.2011.5.1.1.5.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of advanced acl table, the index range is (100..199 | 3000..3999 | 42768..76535). | ||||
| ChwAclAdvancedSubitem | 1.3.6.1.4.1.2011.5.1.1.5.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The object specifies the number of an advanced ACL rule. If the number specified has been assigned to an ACL rule, the new rule will overwrite the old one, which is equal to editing the old rule. If the number is not assigned, the system will define a rule with the number and insert it to the place corresponding to its number. If no number is specified, the system will define a rule, assign a number to it and add it into the ACL. It will be placed at the end of the ACL when configuration sequence is adopted; otherwise, it will be placed based on the 'Depth-first' principle. When ACL rules are following the 'Depth-first' principle, the number of an ACL rule must be given 0, but it will be assigned by step automatically; otherwise, this rule will not be created. | ||||
| ChwAclAdvancedAct | 1.3.6.1.4.1.2011.5.1.1.5.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current The object indicates the action of an advanced acl rule. 'deny' means discarding the packets that meet the condition, 'permit' means permitting the packets that meet the condition.
| ||||
| ChwAclAdvancedProtocol | 1.3.6.1.4.1.2011.5.1.1.5.1.4 | Integer32 (0..255) | RC | |
column · Integer32 (0..255) · read-create · current The value of this object identifies the number of the protocol over IP. The value ranges from 0 to 255. The value 0 indicates the IP protocol. | ||||
| ChwAclAdvancedSrcIp | 1.3.6.1.4.1.2011.5.1.1.5.1.5 | IpAddress | RC | |
column · IpAddress · read-create · current The value of this object identifies the source IP address. The value ranges from 0.0.0.0 to 255.255.255.255. | ||||
| ChwAclAdvancedSrcWild | 1.3.6.1.4.1.2011.5.1.1.5.1.6 | IpAddress | RC | |
column · IpAddress · read-create · current The value of this object identifies the wildcard mask of the source IP address. The value ranges from 0.0.0.0 to 255.255.255.255. | ||||
| ChwAclAdvancedSrcOp | 1.3.6.1.4.1.2011.5.1.1.5.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current The object indicates the source Port operation symbol of an advanced acl rule. It compares the port operators of source address. 'lt' means less than, 'eq' means equal to, 'gt' means greater than, 'neq' means not equal to, 'range' means between, 'invalid' means this operation of the rule is invalid.
| ||||
| ChwAclAdvancedSrcPort1 | 1.3.6.1.4.1.2011.5.1.1.5.1.8 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current This object indicates the end source port number. | ||||
| ChwAclAdvancedSrcPort2 | 1.3.6.1.4.1.2011.5.1.1.5.1.9 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current This object indicates the start source port number. | ||||
| ChwAclAdvancedDestIp | 1.3.6.1.4.1.2011.5.1.1.5.1.10 | IpAddress | RC | |
column · IpAddress · read-create · current This object indicates the destination IP address. The value ranges from 0.0.0.0 to 255.255.255.255. | ||||
| ChwAclAdvancedDestWild | 1.3.6.1.4.1.2011.5.1.1.5.1.11 | IpAddress | RC | |
column · IpAddress · read-create · current This object indicates the mask of the destination IP address. The value ranges from 0.0.0.0 to 255.255.255.255. | ||||
| ChwAclAdvancedDestOp | 1.3.6.1.4.1.2011.5.1.1.5.1.12 | INTEGER | RC | |
column · INTEGER · read-create · current The object indicates the destination Port operation symbol of an advanced acl group. It compares the port operators of destination address. 'lt' means less than, 'eq' means equal to, 'gt' means greater than, 'neq' means not equal to, 'range' means between, 'invalid' means this operation of the rule is invalid.
| ||||
| ChwAclAdvancedDestPort1 | 1.3.6.1.4.1.2011.5.1.1.5.1.13 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current This object indicates the end destination port number. | ||||
| ChwAclAdvancedDestPort2 | 1.3.6.1.4.1.2011.5.1.1.5.1.14 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current This object indicates the start destination port number. | ||||
| ChwAclAdvancedPrecedence | 1.3.6.1.4.1.2011.5.1.1.5.1.15 | Integer32 (0..7 | 255) | RC | |
column · Integer32 (0..7 | 255) · read-create · current The value of this object identifies the precedence sub-field. It is the higher three bits of the ToS field in an IP header. The value ranges from 0 to 7. The invalid value is 255. | ||||
| ChwAclAdvancedTos | 1.3.6.1.4.1.2011.5.1.1.5.1.16 | Integer32 (0..15 | 255) | RC | |
column · Integer32 (0..15 | 255) · read-create · current The value of this object identifies the ToS sub-field. This field covers four bits after the higher three bits of the ToS field in an IP header. The value ranges from 0 to 15. The invalid value is 255. | ||||
| ChwAclAdvancedDscp | 1.3.6.1.4.1.2011.5.1.1.5.1.17 | Integer32 (0..63 | 255) | RC | |
column · Integer32 (0..63 | 255) · read-create · current The value of this object identifies the higher six bits of the ToS field in an IP header. The value ranges from 0 to 63. The invalid value is 255. | ||||
| ChwAclAdvancedEstablish | 1.3.6.1.4.1.2011.5.1.1.5.1.18 | TruthValue | RC | |
column · TruthValue · read-create · current The object indicates whether or not establishing. | ||||
| ChwAclAdvancedTimeRangeIndex | 1.3.6.1.4.1.2011.5.1.1.5.1.19 | Integer32 (0..256) | RC | |
column · Integer32 (0..256) · read-create · current The object indicates the time range of an advanced acl rule. When the current time is in the time range, the rule is valid. Zero value declares that the acl rule has no time range. The invalid value is 0. | ||||
| ChwAclAdvancedIcmpType | 1.3.6.1.4.1.2011.5.1.1.5.1.20 | Integer32 (0..255 | 65535) | RC | |
column · Integer32 (0..255 | 65535) · read-create · current The object indicates the type of ICMP packet. It filters ICMP packets according to the ICMP message type. The invalid value is 65535. | ||||
| ChwAclAdvancedIcmpCode | 1.3.6.1.4.1.2011.5.1.1.5.1.21 | Integer32 (0..255 | 65535) | RC | |
column · Integer32 (0..255 | 65535) · read-create · current The object indicates the code of ICMP packet. It filters ICMP packets according to the message code. The invalid value is 65535. | ||||
| ChwAclAdvancedFragments | 1.3.6.1.4.1.2011.5.1.1.5.1.22 | INTEGER | RC | |
column · INTEGER · read-create · current The object indicates the type of the packet. 0: fragmentSubseq, indicating that the packet is a subsequent fragment 1: fragment, indicating that the packet is a fragment 2: nonFragment, indicating that the packet is not a fragment 3: nonSubseq, indicating that the packet is not a subsequent fragment 4: fragmentSpeFirst, indicating that the packet is the first fragment 255: none, invalid value This object cannot be modified once a rule is created.
| ||||
| ChwAclAdvancedLog | 1.3.6.1.4.1.2011.5.1.1.5.1.23 | TruthValue | RC | |
column · TruthValue · read-create · current The object indicates whether to log the matched packets. The log contents include sequence number of ACL rule, packets passed or discarded, upper layer protocol type over IP, source/destination address, source/destination port number, and number of packets | ||||
| ChwAclAdvancedEnable | 1.3.6.1.4.1.2011.5.1.1.5.1.24 | TruthValue | RO | |
column · TruthValue · read-only · current The object indicates whether the rule is valid or invalid. | ||||
| ChwAclAdvancedCount | 1.3.6.1.4.1.2011.5.1.1.5.1.25 | Counter64 | RO | |
column · Counter64 · read-only · current The object indicates the statistics of matched packets by the rule. | ||||
| ChwAclAdvancedVrfName | 1.3.6.1.4.1.2011.5.1.1.5.1.26 | OCTET STRING (SIZE (0..31)) | RC | |
column · OCTET STRING (SIZE (0..31)) · read-create · current The object indicates the VRF name of this rule, It specifies the VPN-instance to which the packet belongs. | ||||
| ChwAclAdvancedRowStatus | 1.3.6.1.4.1.2011.5.1.1.5.1.27 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus, Now support three state: CreateAndGo, Active, Destroy. | ||||
| ChwAclAdvancedTcpSyncFlag | 1.3.6.1.4.1.2011.5.1.1.5.1.28 | Integer32 (-1 | 0..63) | RC | |
column · Integer32 (-1 | 0..63) · read-create · current The object indicates the code of TCP Sync flag(0~63), The invalid value is -1. | ||||
| ChwAclAdvancedDescription | 1.3.6.1.4.1.2011.5.1.1.5.1.29 | OCTET STRING (SIZE (0..127)) | RC | |
column · OCTET STRING (SIZE (0..127)) · read-create · current The object indicates the description of this advanced rule. The object describes the usage of an ACL with a word or a sentence. | ||||
| ChwAclAdvancedSrcPoolName | 1.3.6.1.4.1.2011.5.1.1.5.1.30 | OCTET STRING (SIZE (0..32)) | RC | |
column · OCTET STRING (SIZE (0..32)) · read-create · current The object indicates the source pool name. | ||||
| ChwAclAdvancedDestPoolName | 1.3.6.1.4.1.2011.5.1.1.5.1.31 | OCTET STRING (SIZE (0..32)) | RC | |
column · OCTET STRING (SIZE (0..32)) · read-create · current The object indicates the destination pool name. | ||||
| ChwAclAdvancedProtocolNew | 1.3.6.1.4.1.2011.5.1.1.5.1.32 | Integer32 (0..255 | 65535) | RC | |
column · Integer32 (0..255 | 65535) · read-create · current The object indicates the protocol type of the rule. It specifies the protocol type over IP. The number of IP protocol is 65535. | ||||
| ChwAclAdvancedVni | 1.3.6.1.4.1.2011.5.1.1.5.1.33 | Integer32 (0..16777215) | RC | |
column · Integer32 (0..16777215) · read-create · current The object indicates the ID of VXLAN, The invalid value is 0. | ||||
| ChwAclAdvancedIgmpType | 1.3.6.1.4.1.2011.5.1.1.5.1.34 | Integer32 (0..255 | 65535) | RC | |
column · Integer32 (0..255 | 65535) · read-create · current The object indicates the type of igmp, The invalid value is 65535. | ||||
| ChwAclAdvancedTtlOp | 1.3.6.1.4.1.2011.5.1.1.5.1.35 | INTEGER | RC | |
column · INTEGER · read-create · current The object indicates the ttl operation symbol of an advanced acl rule. 'lt' means less than, 'eq' means equal to, 'gt' means greater than, 'neq' means not equal to, 'range' means between, 'invalid' means this operation of the rule is invalid.
| ||||
| ChwAclAdvancedTtlExpire | 1.3.6.1.4.1.2011.5.1.1.5.1.36 | Integer32 (0..255) | RC | |
column · Integer32 (0..255) · read-create · current The object indicates the begin ttl value. The invalid value is 0. | ||||
| ChwAclAdvancedTtlExpireEnd | 1.3.6.1.4.1.2011.5.1.1.5.1.37 | Integer32 (0..255) | RC | |
column · Integer32 (0..255) · read-create · current The object indicates the end ttl value. The invalid value is 0. | ||||
| ChwAclAdvancedPktLenOp | 1.3.6.1.4.1.2011.5.1.1.5.1.38 | INTEGER | RC | |
column · INTEGER · read-create · current The object indicates the packet length operation symbol of an advanced acl rule. 'lt' means less than, 'eq' means equal to, 'gt' means greater than, 'neq' means not equal to, 'range' means between, 'invalid' means this operation of the rule is invalid.
| ||||
| ChwAclAdvancedPktLenBegin | 1.3.6.1.4.1.2011.5.1.1.5.1.39 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current The object indicates the begin packet length value. | ||||
| ChwAclAdvancedPktLenEnd | 1.3.6.1.4.1.2011.5.1.1.5.1.40 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current The object indicates the end packet length value. | ||||
| ChwAclAdvancedTcpFlagMask | 1.3.6.1.4.1.2011.5.1.1.5.1.41 | Integer32 (0..63) | RC | |
column · Integer32 (0..63) · read-create · current The object indicates the mask of tcp-flag. The invalid value is 0. | ||||
| ChwAclAdvancedSrcPortPoolName | 1.3.6.1.4.1.2011.5.1.1.5.1.42 | OCTET STRING (SIZE (0..32)) | RC | |
column · OCTET STRING (SIZE (0..32)) · read-create · current The object indicates the source port pool name. | ||||
| ChwAclAdvancedDestPortPoolName | 1.3.6.1.4.1.2011.5.1.1.5.1.43 | OCTET STRING (SIZE (0..32)) | RC | |
column · OCTET STRING (SIZE (0..32)) · read-create · current The object indicates the destination port pool name. | ||||
| ChwAclAdvancedIcmpTypeEnd | 1.3.6.1.4.1.2011.5.1.1.5.1.44 | Integer32 (0..255 | 65535) | RC | |
column · Integer32 (0..255 | 65535) · read-create · current The value of this object identifies the ICMP message type. The value ranges from 0 to 255. The value 65535 is invalid. This object is used together with hwAclAdvancedIcmpType to indicate the value range of the ICMP message type. | ||||
| ChwAclAdvancedVrfAny | 1.3.6.1.4.1.2011.5.1.1.5.1.45 | TruthValue | RC | |
column · TruthValue · read-create · current The object indicates whether or not matching any VPN-instance. | ||||
| ThwAclIfRuleTable | 1.3.6.1.4.1.2011.5.1.1.6 | NA | ||
table · not-accessible · current Configure the rule for interface-based acl group. | ||||
| RhwAclIfRuleEntry | 1.3.6.1.4.1.2011.5.1.1.6.1 | NA | ||
row · not-accessible · current Each entry contains a rule of interface-based acl group.
| ||||
| ChwAclIfAclNum | 1.3.6.1.4.1.2011.5.1.1.6.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of interface-based acl group, the index range is (1000..1999 | 42768..76535). | ||||
| ChwAclIfSubitem | 1.3.6.1.4.1.2011.5.1.1.6.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The object specifies the number of an ACL rule. If the number specified has been assigned to an ACL rule, the new rule will overwrite the old one, which is equal to editing the old rule. If the number is not assigned, the system will define a rule with the number and insert it to the place corresponding to its number. If no number is specified, the system will define a rule, assign a number to it and add it into the ACL. It will be placed at the end of the ACL when configuration sequence is adopted; otherwise, it will be placed based on the 'Depth-first' principle. When ACL rules are following the 'Depth-first' principle, the number of an ACL rule must be given 0, but it will be assigned by step automatically; otherwise, this rule will not be created. | ||||
| ChwAclIfAct | 1.3.6.1.4.1.2011.5.1.1.6.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current The object indicates the action of an interface-based acl rule. 'deny' means discarding the packets that meet the condition, 'permit' means permitting the packets that meet the condition.
| ||||
| ChwAclIfIndex | 1.3.6.1.4.1.2011.5.1.1.6.1.4 | Integer32 | RC | |
column · Integer32 · read-create · current The object indicates the index of an interface. It specifies the interface information of the packets.The invalid interface index is 0. | ||||
| ChwAclIfAny | 1.3.6.1.4.1.2011.5.1.1.6.1.5 | TruthValue | RC | |
column · TruthValue · read-create · current The object indicates whether or not matching any interface. | ||||
| ChwAclIfTimeRangeIndex | 1.3.6.1.4.1.2011.5.1.1.6.1.6 | Integer32 (0..256) | RC | |
column · Integer32 (0..256) · read-create · current The value of this object identifies the index of the time range during which an ACL rule can be applied. When the current time is in the time range, the rule is valid. The value 0 is invalid, indicating that no time range is specified for the rule. The value ranges from 0 to 256. | ||||
| ChwAclIfLog | 1.3.6.1.4.1.2011.5.1.1.6.1.7 | TruthValue | RC | |
column · TruthValue · read-create · current The object indicates whether to log the matched packets. The log contents include sequence number of ACL rule, packets passed or discarded, upper layer protocol type over IP, source/destination address, source/destination port number, and number of packets. | ||||
| ChwAclIfEnable | 1.3.6.1.4.1.2011.5.1.1.6.1.8 | TruthValue | RO | |
column · TruthValue · read-only · current The object indicates whether the rule is valid or invalid. | ||||
| ChwAclIfCount | 1.3.6.1.4.1.2011.5.1.1.6.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current The object indicates the statistics of matched packets by the rule. | ||||
| ChwAclIfRowStatus | 1.3.6.1.4.1.2011.5.1.1.6.1.11 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus,Now support three state:CreateAndGo,Active,Destroy. | ||||
| ChwAclIfDescription | 1.3.6.1.4.1.2011.5.1.1.6.1.12 | OCTET STRING (SIZE (0..127)) | RC | |
column · OCTET STRING (SIZE (0..127)) · read-create · current The object indicates the description of this if rule. The object describes the usage of an ACL with a word or a sentence. | ||||
| ThwAclUserRuleTable | 1.3.6.1.4.1.2011.5.1.1.7 | NA | ||
table · not-accessible · current Configure the rule for user acl group. | ||||
| RhwAclUserRuleEntry | 1.3.6.1.4.1.2011.5.1.1.7.1 | NA | ||
row · not-accessible · current Each entry contains a rule of user acl group. | ||||
| ChwAclUserAclNum | 1.3.6.1.4.1.2011.5.1.1.7.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of user acl table, the index range is (6000..9999). | ||||
| ChwAclUserSubitem | 1.3.6.1.4.1.2011.5.1.1.7.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The object specifies the number of an User ACL rule. If the number specified has been assigned to an ACL rule, the new rule will overwrite the old one, which is equal to editing the old rule. If the number is not assigned, the system will define a rule with the number and insert it to the place corresponding to its number. If no number is specified, the system will define a rule, assign a number to it and add it into the ACL. It will be placed at the end of the ACL when configuration sequence is adopted; otherwise, it will be placed based on the 'Depth-first' principle | ||||
| ChwAclUserAct | 1.3.6.1.4.1.2011.5.1.1.7.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current The object indicates the action of an User acl rule. 'deny' means discarding the packets that meet the condition, 'permit' means permitting the packets that meet the condition.
| ||||
| ChwAclUserProtocol | 1.3.6.1.4.1.2011.5.1.1.7.1.4 | Integer32 (0..255) | RC | |
column · Integer32 (0..255) · read-create · current The object indicates the protocol type of the rule. It specifies the protocol type over IP. The number of IP protocol is 0. | ||||
| ChwAclUserSrcIp | 1.3.6.1.4.1.2011.5.1.1.7.1.5 | IpAddress | RC | |
column · IpAddress · read-create · current The object indicates the source IP-address of an User acl rule. | ||||
| ChwAclUserSrcWild | 1.3.6.1.4.1.2011.5.1.1.7.1.6 | IpAddress | RC | |
column · IpAddress · read-create · current The object indicates the source IP-address wild of an User acl rule. | ||||
| ChwAclUserSrcOp | 1.3.6.1.4.1.2011.5.1.1.7.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current The object indicates the source Port operation symbol of an User acl rule. It compares the port operators of source address. 'lt' means less than, 'eq' means equal to, 'gt' means greater than, 'neq' means not equal to, 'range' means between, 'invalid' means this operation of the rule is invalid.
| ||||
| ChwAclUserSrcPort1 | 1.3.6.1.4.1.2011.5.1.1.7.1.8 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current The object indicates the fourth layer sourec port 1. It specifies the source port information of UDP or TCP packets. | ||||
| ChwAclUserSrcPort2 | 1.3.6.1.4.1.2011.5.1.1.7.1.9 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current The object indicates the fourth layer source port2. | ||||
| ChwAclUserDestIp | 1.3.6.1.4.1.2011.5.1.1.7.1.10 | IpAddress | RC | |
column · IpAddress · read-create · current The object indicates the destination IP-address of an User acl rule. | ||||
| ChwAclUserDestWild | 1.3.6.1.4.1.2011.5.1.1.7.1.11 | IpAddress | RC | |
column · IpAddress · read-create · current The object indicates the destination IP-address wild of an User acl rule. | ||||
| ChwAclUserDestOp | 1.3.6.1.4.1.2011.5.1.1.7.1.12 | INTEGER | RC | |
column · INTEGER · read-create · current The object indicates the destination Port operation symbol of an User acl group. It compares the port operators of destination address. 'lt' means less than, 'eq' means equal to, 'gt' means greater than, 'neq' means not equal to, 'range' means between, 'invalid' means this operation of the rule is invalid.
| ||||
| ChwAclUserDestPort1 | 1.3.6.1.4.1.2011.5.1.1.7.1.13 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current The object indicates the fourth layer destination port1. | ||||
| ChwAclUserDestPort2 | 1.3.6.1.4.1.2011.5.1.1.7.1.14 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current The object indicates the fourth layer destination port2. | ||||
| ChwAclUserPrecedence | 1.3.6.1.4.1.2011.5.1.1.7.1.15 | Integer32 (0..7 | 255) | RC | |
column · Integer32 (0..7 | 255) · read-create · current The object indicates the value of IP-packet's precedence, It filters packets according to precedence field.The invalid value is 255. | ||||
| ChwAclUserTos | 1.3.6.1.4.1.2011.5.1.1.7.1.16 | Integer32 (0..15 | 255) | RC | |
column · Integer32 (0..15 | 255) · read-create · current The object indicates the value of IP-packet's TOS, It filters packets according to type of service.The invalid value is 255. | ||||
| ChwAclUserDscp | 1.3.6.1.4.1.2011.5.1.1.7.1.17 | Integer32 (0..63 | 255) | RC | |
column · Integer32 (0..63 | 255) · read-create · current The object indicates the value of frame.The invalid value is 255. | ||||
| ChwAclUserEstablish | 1.3.6.1.4.1.2011.5.1.1.7.1.18 | TruthValue | RC | |
column · TruthValue · read-create · current The object indicates whether or not establishing. | ||||
| ChwAclUserTimeRangeIndex | 1.3.6.1.4.1.2011.5.1.1.7.1.19 | Integer32 (0..256) | RC | |
column · Integer32 (0..256) · read-create · current The object indicates the time range of an User acl rule. When the current time is in the time range, the rule is valid. Zero value declares that the acl rule has no time range. The invalid value is 0. | ||||
| ChwAclUserIcmpType | 1.3.6.1.4.1.2011.5.1.1.7.1.20 | Integer32 (0..255 | 65535) | RC | |
column · Integer32 (0..255 | 65535) · read-create · current The object indicates the type of ICMP packet. It filters ICMP packets according to the ICMP message type. The invalid value is 65535. | ||||
| ChwAclUserIcmpCode | 1.3.6.1.4.1.2011.5.1.1.7.1.21 | Integer32 (0..255 | 65535) | RC | |
column · Integer32 (0..255 | 65535) · read-create · current The object indicates the code of ICMP packet. It filters ICMP packets according to the message code. The invalid value is 65535. | ||||
| ChwAclUserFragments | 1.3.6.1.4.1.2011.5.1.1.7.1.22 | TruthValue | RC | |
column · TruthValue · read-create · current The object indicates whether or not matching fragmented packet, It specifies that this rule is only valid for the non-first fragment packets. | ||||
| ChwAclUserLog | 1.3.6.1.4.1.2011.5.1.1.7.1.23 | TruthValue | RC | |
column · TruthValue · read-create · current The object indicates whether to log the matched packets. The log contents include sequence number of ACL rule, packets passed or discarded, upper layer protocol type over IP, source/destination address, source/destination port number, and number of packets | ||||
| ChwAclUserEnable | 1.3.6.1.4.1.2011.5.1.1.7.1.24 | TruthValue | RO | |
column · TruthValue · read-only · current The object indicates whether the rule is valid or invalid. | ||||
| ChwAclUserCount | 1.3.6.1.4.1.2011.5.1.1.7.1.25 | Counter32 | RO | |
column · Counter32 · read-only · current The object indicates the statistics of matched packets by the rule. | ||||
| ChwAclUserVrfName | 1.3.6.1.4.1.2011.5.1.1.7.1.26 | OCTET STRING (SIZE (0..32)) | RC | |
column · OCTET STRING (SIZE (0..32)) · read-create · current The object indicates the VRF name of this rule, It specifies the VPN-instance to which the packet belongs. | ||||
| ChwAclUserSrcUserGroupName | 1.3.6.1.4.1.2011.5.1.1.7.1.27 | OCTET STRING (SIZE (0..32)) | RC | |
column · OCTET STRING (SIZE (0..32)) · read-create · current The object indicates the source user group name of this rule. if modetype source is user, null sting means any user | ||||
| ChwAclUserDestUserGroupName | 1.3.6.1.4.1.2011.5.1.1.7.1.28 | OCTET STRING (SIZE (0..32)) | RC | |
column · OCTET STRING (SIZE (0..32)) · read-create · current The object indicates the destination user group name of this rule. if modetype destination is user, null sting means any user | ||||
| ChwAclUserSrcModeType | 1.3.6.1.4.1.2011.5.1.1.7.1.29 | Integer32 (0..4) | RC | |
column · Integer32 (0..4) · read-create · current The object indicates ACL's mode type, Now support four state 0 Any match rule from any user group or any ip subnet, 1 NetAny match rule from any ip subnet, 2 UserAny match rule from any user group, 3 Net match rule from an ip subnet, 4 User match rule from a user group | ||||
| ChwAclUserDestModeType | 1.3.6.1.4.1.2011.5.1.1.7.1.30 | Integer32 (0..6) | RC | |
column · Integer32 (0..6) · read-create · current The object indicates ACL's mode type, Now support four state 0 Any match rule from any user group or any ip subnet or any doamin name, 1 NetAny match rule from any ip subnet, 2 UserAny match rule from any user group, 3 Net match rule from an ip subnet, 4 User match rule from a user group, 5 domain match rule from a domain name, 6 domainAny match rule from any doamin name | ||||
| ChwAclUserRowStatus | 1.3.6.1.4.1.2011.5.1.1.7.1.31 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus, Now support three state: CreateAndGo, Active, Destroy. | ||||
| ChwAclUserTcpSyncFlag | 1.3.6.1.4.1.2011.5.1.1.7.1.32 | Integer32 (-1 | 0..63) | RC | |
column · Integer32 (-1 | 0..63) · read-create · current The object indicates the code of TCP Sync flag(0~63), The invalid value is -1. | ||||
| ChwAclUserSrcUserGroupNum | 1.3.6.1.4.1.2011.5.1.1.7.1.33 | Integer32 (0..64000 | 65535) | RC | |
column · Integer32 (0..64000 | 65535) · read-create · current The object indicates the source user group num of this rule. if modetype source is user, null sting means any user | ||||
| ChwAclUserDestUserGroupNum | 1.3.6.1.4.1.2011.5.1.1.7.1.34 | Integer32 (0..64000 | 65535) | RC | |
column · Integer32 (0..64000 | 65535) · read-create · current The object indicates the destination user group name of this rule. if modetype destination is user, null sting means any user | ||||
| ChwAclUserDestDomainName | 1.3.6.1.4.1.2011.5.1.1.7.1.35 | OCTET STRING (SIZE (3..127)) | RO | |
column · OCTET STRING (SIZE (3..127)) · read-only · current The object indicates the destination domain name of this rule. if modetype destination is domain, null sting means any domain. | ||||
| ShwAclCompileEnableFlag | 1.3.6.1.4.1.2011.5.1.1.10 | TruthValue | RW | |
scalar · TruthValue · read-write · current The object indicates whether acl compiler is enabled. when acl compiler is enabled, and ACL accelerate function is enabled, then matching packets by rule is efficient. | ||||
| ThwAclCompileNumGroupTable | 1.3.6.1.4.1.2011.5.1.1.11 | NA | ||
table · not-accessible · current The ACL compiler table extending the Acl-number-group table | ||||
| RhwAclCompileNumGroupEntry | 1.3.6.1.4.1.2011.5.1.1.11.1 | NA | ||
row · not-accessible · current The entry of Acl-number-group compiler extended table
| ||||
| ChwAclCompileNumGroupStatus | 1.3.6.1.4.1.2011.5.1.1.11.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The object indicates the status of Acl-number-group compiler. 'notCompile' means acl accelerate function is disabled, 'compiled' means acl accelerate function is enabled, 'changeAfterCompile' means acl is changed after compiled.
| ||||
| ThwAclIpv6BasicRuleTable | 1.3.6.1.4.1.2011.5.1.1.12 | NA | ||
table · not-accessible · current Configure the rule for ipv6 basic acl group. | ||||
| RhwAclIpv6BasicRuleEntry | 1.3.6.1.4.1.2011.5.1.1.12.1 | NA | ||
row · not-accessible · current Each entry is a rule of ipv6 basic acl. | ||||
| ChwAclIpv6BasicAclNum | 1.3.6.1.4.1.2011.5.1.1.12.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of ipv6 basic acl group, the index range is (2000..2999 | 42768..75535). | ||||
| ChwAclIpv6BasicSubitem | 1.3.6.1.4.1.2011.5.1.1.12.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The objects specifies the number of an ACL rule. If the number specified has been assigned to an ACL rule, the new rule will overwrite the old one, which is equal to editing the old rule. If the number is not assigned, the system will define a rule with the number and insert it to the place corresponding to its number. If no number is specified, the system will define a rule, assign a number to it and add it into the ACL. It will be placed at the end of the ACL when configuration sequence is adopted; otherwise, it will be placed based on the 'Depth-first' principle. When ACL rules are following the 'Depth-first' principle, the number of an ACL rule must be given 0, but it will be assigned automatically; otherwise, this rule will not be created. | ||||
| ChwAclIpv6BasicAct | 1.3.6.1.4.1.2011.5.1.1.12.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current The object indicates the action of a ipv6 basic acl rule. 'deny' means discarding the packets that meet the condition, 'permit' means permitting the packets that meet the condition.
| ||||
| ChwAclIpv6BasicSrcIp | 1.3.6.1.4.1.2011.5.1.1.12.1.4 | Ipv6Address | RC | |
column · Ipv6Address · read-create · current The object indicates the source IPv6-address of a ipv6 basic acl rule. | ||||
| ChwAclIpv6BasicSrcPrefix | 1.3.6.1.4.1.2011.5.1.1.12.1.5 | Integer32 (0..128) | RC | |
column · Integer32 (0..128) · read-create · current The value of this object identifies the mask length of the source IPv6 address. The value ranges from 0 to 128. | ||||
| ChwAclIpv6BasicTimeRangeIndex | 1.3.6.1.4.1.2011.5.1.1.12.1.6 | Integer32 (0..256) | RC | |
column · Integer32 (0..256) · read-create · current The value of this object identifies the index of the time range during which an ACL6 rule can be applied. The value ranges from 0 to 256. The value 0 is invalid, indicating that no time range is specified for the rule. | ||||
| ChwAclIpv6BasicFragment | 1.3.6.1.4.1.2011.5.1.1.12.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current The object indicates the type of the packet. 1: fragment, indicating that the packet is a fragment 255: none, invalid value This object cannot be modified once a rule is created.
| ||||
| ChwAclIpv6BasicLog | 1.3.6.1.4.1.2011.5.1.1.12.1.8 | TruthValue | RC | |
column · TruthValue · read-create · current The object indicates whether to log the matched packets. The log contents include sequence number of ACL rule, packets passed or discarded, upper layer protocol type over IP, source/destination address, source/destination port number, and number of packets. | ||||
| ChwAclIpv6BasicEnable | 1.3.6.1.4.1.2011.5.1.1.12.1.9 | EnabledStatus | RO | |
column · EnabledStatus · read-only · current The object indicates whether the rule is valid or invalid. | ||||
| ChwAclIpv6BasicCount | 1.3.6.1.4.1.2011.5.1.1.12.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the number of matched packets by a rule. A maximum of 64 bits are supported. | ||||
| ChwAclIpv6BasicVrfName | 1.3.6.1.4.1.2011.5.1.1.12.1.11 | OCTET STRING (SIZE (0..31)) | RC | |
column · OCTET STRING (SIZE (0..31)) · read-create · current This object indicates a VPN instance. The length of a VPN instance name cannot exceed 31 characters. | ||||
| ChwAclIpv6BasicRowStatus | 1.3.6.1.4.1.2011.5.1.1.12.1.12 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus, Now support three value: CreateAndGo, Active and Destroy. | ||||
| ChwAclIpv6BasicDescription | 1.3.6.1.4.1.2011.5.1.1.12.1.13 | OCTET STRING (SIZE (0..127)) | RC | |
column · OCTET STRING (SIZE (0..127)) · read-create · current The object indicates the description of this IPv6 basic rule. The object describes the usage of an IPv6 ACL with a word or a sentence. | ||||
| ChwAclIpv6BasicSrcMask | 1.3.6.1.4.1.2011.5.1.1.12.1.14 | Ipv6Address | RC | |
column · Ipv6Address · read-create · current The object indicates the source IPv6-address mask of a ipv6 basic acl rule. Its mode is positive. | ||||
| ChwAclIpv6BasicVrfAny | 1.3.6.1.4.1.2011.5.1.1.12.1.15 | TruthValue | RC | |
column · TruthValue · read-create · current The object indicates whether or not matching any VPN-instance. | ||||
| ChwAclIpv6BasicSrcWild | 1.3.6.1.4.1.2011.5.1.1.12.1.16 | Ipv6Address | RC | |
column · Ipv6Address · read-create · current The object indicates the wildcard mask of the source IPv6 address. | ||||
| ThwAclIpv6AdvancedRuleTable | 1.3.6.1.4.1.2011.5.1.1.13 | NA | ||
table · not-accessible · current Configure the rule for ipv6 advanced acl group. | ||||
| RhwAclIpv6AdvancedRuleEntry | 1.3.6.1.4.1.2011.5.1.1.13.1 | NA | ||
row · not-accessible · current Each entry contains a rule of ipv6 advanced acl group. | ||||
| ChwAclIpv6AdvancedAclNum | 1.3.6.1.4.1.2011.5.1.1.13.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of ipv6 advanced acl table, the index range is (3000..3999 | 42768..75535). | ||||
| ChwAclIpv6AdvancedSubitem | 1.3.6.1.4.1.2011.5.1.1.13.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The object specifies the number of an ipv6 advanced ACL rule. If the number specified has been assigned to an ACL rule, the new rule will overwrite the old one, which is equal to editing the old rule. If the number is not assigned, the system will define a rule with the number and insert it to the place corresponding to its number. If no number is specified, the system will define a rule, assign a number to it and add it into the ACL. It will be placed at the end of the ACL when configuration sequence is adopted; otherwise, it will be placed based on the 'Depth-first' principle. When ACL rules are following the 'Depth-first' principle, the number of an ACL rule must be given 0, but it will be assigned automatically; otherwise, this rule will not be created. | ||||
| ChwAclIpv6AdvancedAct | 1.3.6.1.4.1.2011.5.1.1.13.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current The object indicates the action of an ipv6 advanced acl rule. 'deny' means discarding the packets that meet the condition, 'permit' means permitting the packets that meet the condition.
| ||||
| ChwAclIpv6AdvancedProtocol | 1.3.6.1.4.1.2011.5.1.1.13.1.4 | Integer32 (0..255) | RC | |
column · Integer32 (0..255) · read-create · current The value of this object identifies the number of the protocol over IPv6. The value ranges from 0 to 255. The value 0 indicates the IPv6 protocol. | ||||
| ChwAclIpv6AdvancedSrcIp | 1.3.6.1.4.1.2011.5.1.1.13.1.5 | Ipv6Address | RC | |
column · Ipv6Address · read-create · current The object indicates the source IPv6-address of an ipv6 advanced acl rule. | ||||
| ChwAclIpv6AdvancedSrcPrefix | 1.3.6.1.4.1.2011.5.1.1.13.1.6 | Integer32 (0..128) | RC | |
column · Integer32 (0..128) · read-create · current The value of this object identifies the mask length of the source IPv6 address. The value ranges from 0 to 128. | ||||
| ChwAclIpv6AdvancedSrcOp | 1.3.6.1.4.1.2011.5.1.1.13.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current The object indicates the source Port operation symbol of an ipv6 advanced acl rule. It compares the port operators of source address. 'lt' means less than, 'eq' means equal to, 'gt' means greater than, 'neq' means not equal to, 'range' means between, 'invalid' means this operation of the rule is invalid.
| ||||
| ChwAclIpv6AdvancedSrcPort1 | 1.3.6.1.4.1.2011.5.1.1.13.1.8 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current This object indicates the end source port number. | ||||
| ChwAclIpv6AdvancedSrcPort2 | 1.3.6.1.4.1.2011.5.1.1.13.1.9 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current This object indicates the start source port number. | ||||
| ChwAclIpv6AdvancedDestIp | 1.3.6.1.4.1.2011.5.1.1.13.1.10 | Ipv6Address | RC | |
column · Ipv6Address · read-create · current The object indicates the destination IPv6-address of an ipv6 advanced acl rule. | ||||
| ChwAclIpv6AdvancedDestPrefix | 1.3.6.1.4.1.2011.5.1.1.13.1.11 | Integer32 (0..128) | RC | |
column · Integer32 (0..128) · read-create · current The value of this object identifies the mask length of the destination IPv6 address. The value ranges from 0 to 128. | ||||
| ChwAclIpv6AdvancedDestOp | 1.3.6.1.4.1.2011.5.1.1.13.1.12 | INTEGER | RC | |
column · INTEGER · read-create · current The object indicates the destination Port operation symbol of an ipv6 advanced acl group. It compares the port operators of destination address. 'lt' means less than, 'eq' means equal to, 'gt' means greater than, 'neq' means not equal to, 'range' means between, 'invalid' means this operation of the rule is invalid.
| ||||
| ChwAclIpv6AdvancedDestPort1 | 1.3.6.1.4.1.2011.5.1.1.13.1.13 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current This object indicates the largest destination port number. | ||||
| ChwAclIpv6AdvancedDestPort2 | 1.3.6.1.4.1.2011.5.1.1.13.1.14 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current This object indicates the smallest destination port number. | ||||
| ChwAclIpv6AdvancedPrecedence | 1.3.6.1.4.1.2011.5.1.1.13.1.15 | Integer32 (0..7 | 255) | RC | |
column · Integer32 (0..7 | 255) · read-create · current The value of this object identifies the precedence sub-field. It is the higher three bits of the ToS field in an IPv6 header. The value ranges from 0 to 7. The invalid value is 255. | ||||
| ChwAclIpv6AdvancedTos | 1.3.6.1.4.1.2011.5.1.1.13.1.16 | Integer32 (0..15 | 255) | RC | |
column · Integer32 (0..15 | 255) · read-create · current The value of this object identifies the ToS sub-field. This field covers four bits after the higher three bits of the ToS field in an IPv6 header. The value ranges from 0 to 15. The invalid value is 255. | ||||
| ChwAclIpv6AdvancedDscp | 1.3.6.1.4.1.2011.5.1.1.13.1.17 | Integer32 (0..63 | 255) | RC | |
column · Integer32 (0..63 | 255) · read-create · current The value of this object identifies the higher seven bits of the ToS field in an IPv6 header. The value ranges from 0 to 63. The invalid value is 255. | ||||
| ChwAclIpv6AdvancedEstablish | 1.3.6.1.4.1.2011.5.1.1.13.1.18 | TruthValue | RC | |
column · TruthValue · read-create · current The object indicates whether or not establishing. | ||||
| ChwAclIpv6AdvancedTimeRangeIndex | 1.3.6.1.4.1.2011.5.1.1.13.1.19 | Integer32 (0..256) | RC | |
column · Integer32 (0..256) · read-create · current The value of this object identifies the index of the time range during which an ACL6 rule can be applied. The value ranges from 0 to 256. The value 0 indicates that no time range is specified for the rule. | ||||
| ChwAclIpv6AdvancedIcmpType | 1.3.6.1.4.1.2011.5.1.1.13.1.20 | Integer32 (0..255 | 65535) | RC | |
column · Integer32 (0..255 | 65535) · read-create · current The value of this object identifies the ICMPv6 message type. The value ranges from 0 to 255. The value 65535 is invalid. | ||||
| ChwAclIpv6AdvancedIcmpCode | 1.3.6.1.4.1.2011.5.1.1.13.1.21 | Integer32 (0..255 | 65535) | RC | |
column · Integer32 (0..255 | 65535) · read-create · current The value of this object identifies the code of an ICMPv6 message. The value ranges from 0 to 255. The value 65535 is invalid. | ||||
| ChwAclIpv6AdvancedFragment | 1.3.6.1.4.1.2011.5.1.1.13.1.22 | INTEGER | RC | |
column · INTEGER · read-create · current The object indicates the type of the packet. 1: fragment, indicating that the packet is a fragment 255: none, invalid value This object cannot be modified once a rule is created.
| ||||
| ChwAclIpv6AdvancedLog | 1.3.6.1.4.1.2011.5.1.1.13.1.23 | TruthValue | RC | |
column · TruthValue · read-create · current The object indicates whether to log the matched packets. The log contents include sequence number of ACL rule, packets passed or discarded, upper layer protocol type over IP, source/destination address, source/destination port number, and number of packets | ||||
| ChwAclIpv6AdvancedEnable | 1.3.6.1.4.1.2011.5.1.1.13.1.24 | EnabledStatus | RO | |
column · EnabledStatus · read-only · current The object indicates whether the rule is valid or invalid. | ||||
| ChwAclIpv6AdvancedCount | 1.3.6.1.4.1.2011.5.1.1.13.1.25 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the number of packets matched by a rule. A maximum of 64 bits are supported. | ||||
| ChwAclIpv6AdvancedVrfName | 1.3.6.1.4.1.2011.5.1.1.13.1.26 | OCTET STRING (SIZE (0..31)) | RC | |
column · OCTET STRING (SIZE (0..31)) · read-create · current This object indicates a VPN instance. The length of a VPN instance name cannot exceed 31 characters. | ||||
| ChwAclIpv6AdvancedRowStatus | 1.3.6.1.4.1.2011.5.1.1.13.1.27 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus, Now support three state: CreateAndGo, Active, Destroy. | ||||
| ChwAclIpv6AdvancedDescription | 1.3.6.1.4.1.2011.5.1.1.13.1.28 | OCTET STRING (SIZE (0..127)) | RC | |
column · OCTET STRING (SIZE (0..127)) · read-create · current The object indicates the description of this IPv6 advanced rule. The object describes the usage of an IPv6 ACL with a word or a sentence. | ||||
| ChwAclIpv6AdvancedSrcMask | 1.3.6.1.4.1.2011.5.1.1.13.1.29 | Ipv6Address | RC | |
column · Ipv6Address · read-create · current The object indicates the source IPv6-address mask of an ipv6 advanced acl rule. Its mode is positive. | ||||
| ChwAclIpv6AdvancedDestMask | 1.3.6.1.4.1.2011.5.1.1.13.1.30 | Ipv6Address | RC | |
column · Ipv6Address · read-create · current The object indicates the destination IPv6-address mask of an ipv6 advanced acl rule. Its mode is positive. | ||||
| ChwAclIpv6AdvancedProtocolNew | 1.3.6.1.4.1.2011.5.1.1.13.1.31 | Integer32 (0..255 | 65535) | RC | |
column · Integer32 (0..255 | 65535) · read-create · current The object indicates the protocol type of the rule. It specifies the protocol type over IP. The number of IPv6 protocol is 65535. | ||||
| ChwAclIpv6AdvancedIcmpTypeEnd | 1.3.6.1.4.1.2011.5.1.1.13.1.32 | Integer32 (0..255 | 65535) | RC | |
column · Integer32 (0..255 | 65535) · read-create · current The value of this object identifies the ICMPv6 message type. The value ranges from 0 to 255. The value 65535 is invalid. This object is used together with hwAclIpv6AdvancedIcmpType to indicate the value range of the ICMPv6 type. | ||||
| ChwAclIpv6AdvancedVrfAny | 1.3.6.1.4.1.2011.5.1.1.13.1.33 | TruthValue | RC | |
column · TruthValue · read-create · current The object indicates whether or not matching any VPN-instance. | ||||
| ChwAclIpv6AdvancedSrcPoolName | 1.3.6.1.4.1.2011.5.1.1.13.1.34 | OCTET STRING (SIZE (0..32)) | RC | |
column · OCTET STRING (SIZE (0..32)) · read-create · current The object indicates the source Ipv6 pool name. | ||||
| ChwAclIpv6AdvancedVni | 1.3.6.1.4.1.2011.5.1.1.13.1.35 | Integer32 (0..16777215) | RC | |
column · Integer32 (0..16777215) · read-create · current The object indicates the ID of VXLAN, The invalid value is 0. | ||||
| ChwAclIpv6AdvancedTcpFlag | 1.3.6.1.4.1.2011.5.1.1.13.1.36 | Integer32 (-1 | 0..63) | RC | |
column · Integer32 (-1 | 0..63) · read-create · current The object indicates the code of TCP Sync flag(0~63), The invalid value is -1. | ||||
| ChwAclIpv6AdvancedTcpFlagMask | 1.3.6.1.4.1.2011.5.1.1.13.1.37 | Integer32 (0..63) | RC | |
column · Integer32 (0..63) · read-create · current The object indicates the mask of tcp-flag. The invalid value is 0. | ||||
| ChwAclIpv6AdvancedSrcWild | 1.3.6.1.4.1.2011.5.1.1.13.1.38 | Ipv6Address | RC | |
column · Ipv6Address · read-create · current The object indicates the wildcard mask of the source IPv6 address. | ||||
| ChwAclIpv6AdvancedDestWild | 1.3.6.1.4.1.2011.5.1.1.13.1.39 | Ipv6Address | RC | |
column · Ipv6Address · read-create · current The object indicates the wildcard mask of the destination IPv6 address. | ||||
| ThwAclEthernetFrameRuleTable | 1.3.6.1.4.1.2011.5.1.1.14 | NA | ||
table · not-accessible · current Configure the rule for ethernet-frame-based acl group. | ||||
| RhwAclEthernetFrameRuleEntry | 1.3.6.1.4.1.2011.5.1.1.14.1 | NA | ||
row · not-accessible · current Each entry contains a rule of ethernet-frame-based acl group. | ||||
| ChwAclEthernetFrameAclNum | 1.3.6.1.4.1.2011.5.1.1.14.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of ethernet-frame-based acl group, the index range is (4000..4999 | 42768..76535). | ||||
| ChwAclEthernetFrameSubitem | 1.3.6.1.4.1.2011.5.1.1.14.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The object specifies the number of an ACL rule. If the number specified has been assigned to an ACL rule, the new rule will overwrite the old one, which is equal to editing the old rule. If the number is not assigned, the system will define a rule with the number and insert it to the place corresponding to its number. If no number is specified, the system will define a rule, assign a number to it and add it into the ACL. It will be placed at the end of the ACL when configuration sequence is adopted; otherwise, it will be placed based on the 'Depth-first' principle. When ACL rules are following the 'Depth-first' principle, the number of an ACL rule must be given 0, but it will be assigned by step automatically; otherwise, this rule will not be created. | ||||
| ChwAclEthernetFrameAct | 1.3.6.1.4.1.2011.5.1.1.14.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current The object indicates the action of an ethernet-frame-based acl rule. 'deny' means discarding the packets that meet the condition, 'permit' means permitting the packets that meet the condition.
| ||||
| ChwAclEthernetFrameType | 1.3.6.1.4.1.2011.5.1.1.14.1.4 | Integer32 | RC | |
column · Integer32 · read-create · current The value of this object identifies the protocol type of an Ethernet frame. The value ranges from 0 to 65535. | ||||
| ChwAclEthernetFrameTypeMask | 1.3.6.1.4.1.2011.5.1.1.14.1.5 | Integer32 | RC | |
column · Integer32 · read-create · current The value of this object identifies the mask of the protocol type of an Ethernet frame. The value ranges from 0 to 65535. | ||||
| ChwAclEthernetFrameSrcMac | 1.3.6.1.4.1.2011.5.1.1.14.1.6 | MacAddress | RC | |
column · MacAddress · read-create · current The object indicates the source mac address of rule. | ||||
| ChwAclEthernetFrameSrcMacMask | 1.3.6.1.4.1.2011.5.1.1.14.1.7 | MacAddress | RC | |
column · MacAddress · read-create · current The object indicates the source mac mask of rule. | ||||
| ChwAclEthernetFrameDstMac | 1.3.6.1.4.1.2011.5.1.1.14.1.8 | MacAddress | RC | |
column · MacAddress · read-create · current The object indicates the destination mac address of rule. | ||||
| ChwAclEthernetFrameDstMacMask | 1.3.6.1.4.1.2011.5.1.1.14.1.9 | MacAddress | RC | |
column · MacAddress · read-create · current The object indicates the destination mac mask of rule. | ||||
| ChwAclEthernetFrameTimeRangeIndex | 1.3.6.1.4.1.2011.5.1.1.14.1.10 | Integer32 (0..256) | RC | |
column · Integer32 (0..256) · read-create · current The object indicates the time range of a ethernet frame acl rule. When the current time is in time range, the rule is valid. Zero value declares that the acl rule has no time range. The invalid value is 0. | ||||
| ChwAclEthernetFrameLog | 1.3.6.1.4.1.2011.5.1.1.14.1.11 | TruthValue | RC | |
column · TruthValue · read-create · current The object indicates whether to log the matched packets. The log contents include sequence number of ACL rule, packets passed or discarded, source/destination mac addr, protocol of ethernet frame, and number of packets. | ||||
| ChwAclEthernetFrameEnable | 1.3.6.1.4.1.2011.5.1.1.14.1.12 | EnabledStatus | RO | |
column · EnabledStatus · read-only · current The object indicates whether the rule is valid or invalid. | ||||
| ChwAclEthernetFrameCount | 1.3.6.1.4.1.2011.5.1.1.14.1.13 | Counter64 | RO | |
column · Counter64 · read-only · current This object indicates the number of matched packets by a rule. A maximum of 64 bits are supported. | ||||
| ChwAclEthernetFrameRowStatus | 1.3.6.1.4.1.2011.5.1.1.14.1.14 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus,Now support three state:CreateAndGo,Active,Destroy. | ||||
| ChwAclEthernetFrameEncapType | 1.3.6.1.4.1.2011.5.1.1.14.1.15 | INTEGER | RC | |
column · INTEGER · read-create · current The object indicates the encapsulation type of rule.
| ||||
| ChwAclEthernetFrameDoubleTag | 1.3.6.1.4.1.2011.5.1.1.14.1.16 | TruthValue | RC | |
column · TruthValue · read-create · current The object indicates two tags of rule. False value do not care the number of tags. | ||||
| ChwAclEthernetFrameVlanId | 1.3.6.1.4.1.2011.5.1.1.14.1.17 | Integer32 (0..4094) | RC | |
column · Integer32 (0..4094) · read-create · current The object indicates the vlan ID of rule. The invalid vlan ID is 0. | ||||
| ChwAclEthernetFrameVlanIdMask | 1.3.6.1.4.1.2011.5.1.1.14.1.18 | Integer32 (0..4095) | RC | |
column · Integer32 (0..4095) · read-create · current The object indicates the vlan ID mask of rule. | ||||
| ChwAclEthernetFrameCVlanId | 1.3.6.1.4.1.2011.5.1.1.14.1.19 | Integer32 (0..4094) | RC | |
column · Integer32 (0..4094) · read-create · current The object indicates the ce-vlan ID of rule. The invalid vlan ID is 0. | ||||
| ChwAclEthernetFrameCVlanIdMask | 1.3.6.1.4.1.2011.5.1.1.14.1.20 | Integer32 (0..4095) | RC | |
column · Integer32 (0..4095) · read-create · current The object indicates the ce-vlan ID mask of rule. | ||||
| ChwAclEthernetFrameRule8021p | 1.3.6.1.4.1.2011.5.1.1.14.1.21 | Integer32 (0..7 | 255) | RC | |
column · Integer32 (0..7 | 255) · read-create · current The object indicates the 8021p value of S-tag. | ||||
| ChwAclEthernetFrameRuleCVlan8021p | 1.3.6.1.4.1.2011.5.1.1.14.1.22 | Integer32 (0..7 | 255) | RC | |
column · Integer32 (0..7 | 255) · read-create · current The object indicates the 8021p value of C-tag. | ||||
| ChwAclEthernetFrameDescription | 1.3.6.1.4.1.2011.5.1.1.14.1.23 | OCTET STRING (SIZE (0..127)) | RC | |
column · OCTET STRING (SIZE (0..127)) · read-create · current The object indicates the description of this ethernetframe rule. The object describes the usage of an ACL with a word or a sentence. | ||||
| ThwAclAppliedTable | 1.3.6.1.4.1.2011.5.1.1.15 | NA | ||
table · not-accessible · current Configure the applied ACL. | ||||
| RhwAclAppliedEntry | 1.3.6.1.4.1.2011.5.1.1.15.1 | NA | ||
row · not-accessible · current Each entry contains a applied ACL. | ||||
| ChwAclAppliedOperation | 1.3.6.1.4.1.2011.5.1.1.15.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current The actions taken when packets conforming or exceeding the configured.
| ||||
| ChwAclAppliedScopeType | 1.3.6.1.4.1.2011.5.1.1.15.1.2 | INTEGER | NA | |
column · INTEGER · not-accessible · current The scope that ACL apply on.
| ||||
| ChwAclAppliedScopeIndex | 1.3.6.1.4.1.2011.5.1.1.15.1.3 | Integer32 | NA | |
column · Integer32 · not-accessible · current When the scope is global, this field is invalid; When the scope is vlan, this field is vlan ID; When the scope is interface, this field is interface index. | ||||
| ChwAclAppliedDirection | 1.3.6.1.4.1.2011.5.1.1.15.1.4 | INTEGER | NA | |
column · INTEGER · not-accessible · current The direction acl apply on.
| ||||
| ChwAclAppliedAclNum | 1.3.6.1.4.1.2011.5.1.1.15.1.5 | Integer32 (2000..4999) | NA | |
column · Integer32 (2000..4999) · not-accessible · current The index of ACL group. Basic ACL in range 2000~2999; Advance ACL in range 3000~3999; Link ACL in range 4000~4999; | ||||
| ChwAclAppliedSubitem | 1.3.6.1.4.1.2011.5.1.1.15.1.6 | Integer32 | NA | |
column · Integer32 · not-accessible · current The object specifies the number of an ACL rule. | ||||
| ChwAclAppliedAclNum2 | 1.3.6.1.4.1.2011.5.1.1.15.1.7 | Integer32 (2000..3999 | 65535) | NA | |
column · Integer32 (2000..3999 | 65535) · not-accessible · current The index of ACL group. 65535 means this field is valid. | ||||
| ChwAclAppliedSubitem2 | 1.3.6.1.4.1.2011.5.1.1.15.1.8 | Integer32 | NA | |
column · Integer32 · not-accessible · current The object specifies the number of an ACL rule. | ||||
| ChwAclAppliedStatMode | 1.3.6.1.4.1.2011.5.1.1.15.1.9 | INTEGER | RC | |
column · INTEGER · read-create · current The object specifies the mode of statistics. When action is statistic, this field is valid.
| ||||
| ChwAclAppliedStatCount | 1.3.6.1.4.1.2011.5.1.1.15.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current The object indicates the statistics of matched packets by the policy. When action is statistic or limit, this field is valid. | ||||
| ChwAclAppliedLimitCir | 1.3.6.1.4.1.2011.5.1.1.15.1.11 | Integer32 (0 | 64..10000000) | RC | |
column · Integer32 (0 | 64..10000000) · read-create · current Committed information rate. Unit: kbps. | ||||
| ChwAclAppliedLimitPir | 1.3.6.1.4.1.2011.5.1.1.15.1.12 | Integer32 (0 | 64..10000000) | RC | |
column · Integer32 (0 | 64..10000000) · read-create · current Peak information rate. Unit: kbps. 0 is the default value. | ||||
| ChwAclAppliedLimitCbs | 1.3.6.1.4.1.2011.5.1.1.15.1.13 | Integer32 (0 | 4096..16773120) | RC | |
column · Integer32 (0 | 4096..16773120) · read-create · current Committed burst size. Unit: byte. 0 is the default value. | ||||
| ChwAclAppliedLimitPbs | 1.3.6.1.4.1.2011.5.1.1.15.1.14 | Integer32 (0 | 4096..16773120) | RC | |
column · Integer32 (0 | 4096..16773120) · read-create · current Peak burst size. Unit: byte. 0 is the default value. | ||||
| ChwAclAppliedLimitGreenAction | 1.3.6.1.4.1.2011.5.1.1.15.1.15 | INTEGER | RC | |
column · INTEGER · read-create · current Green action.
| ||||
| ChwAclAppliedLimitGreenValue | 1.3.6.1.4.1.2011.5.1.1.15.1.16 | Integer32 (0..63) | RC | |
column · Integer32 (0..63) · read-create · current The value is to remark When green action is remarking. For remarking DSCP, the range is 0~63; For remarking 8021p, the range is 0~7. | ||||
| ChwAclAppliedLimitYellowAction | 1.3.6.1.4.1.2011.5.1.1.15.1.17 | INTEGER | RC | |
column · INTEGER · read-create · current Yellow action.
| ||||
| ChwAclAppliedLimitYellowValue | 1.3.6.1.4.1.2011.5.1.1.15.1.18 | Integer32 (0..63) | RC | |
column · Integer32 (0..63) · read-create · current The value is to remark When yellow action is remarking. For remarking DSCP, the range is 0~63; For remarking 8021p, the range is 0~7. | ||||
| ChwAclAppliedLimitRedAction | 1.3.6.1.4.1.2011.5.1.1.15.1.19 | INTEGER | RC | |
column · INTEGER · read-create · current Red action.
| ||||
| ChwAclAppliedLimitRedValue | 1.3.6.1.4.1.2011.5.1.1.15.1.20 | Integer32 (0..63) | RC | |
column · Integer32 (0..63) · read-create · current The value is to remark When red action is remarking. For remarking DSCP, the range is 0~63; For remarking 8021p, the range is 0~7. | ||||
| ChwAclAppliedMirrObservedPort | 1.3.6.1.4.1.2011.5.1.1.15.1.21 | Integer32 | RC | |
column · Integer32 · read-create · current The mirror observe port number. | ||||
| ChwAclAppliedMirrRspanVlan | 1.3.6.1.4.1.2011.5.1.1.15.1.22 | Integer32 (0..4094) | RC | |
column · Integer32 (0..4094) · read-create · current The object specifies the RSPAN vlan. 0 means mirror to local port. | ||||
| ChwAclAppliedRedirectIfIndex | 1.3.6.1.4.1.2011.5.1.1.15.1.23 | Integer32 | RC | |
column · Integer32 · read-create · current The redirect output interface. | ||||
| ChwAclAppliedRedirectIpAddr | 1.3.6.1.4.1.2011.5.1.1.15.1.24 | IpAddress | RC | |
column · IpAddress · read-create · current The redirect IP next hop address. | ||||
| ChwAclAppliedRedirectIpv6Addr | 1.3.6.1.4.1.2011.5.1.1.15.1.25 | Ipv6Address | RC | |
column · Ipv6Address · read-create · current The redirect IPv6 next hop address. | ||||
| ChwAclAppliedRemarkVlan | 1.3.6.1.4.1.2011.5.1.1.15.1.26 | Integer32 (0..4094) | RC | |
column · Integer32 (0..4094) · read-create · current The remarked vlan ID. | ||||
| ChwAclAppliedRemarkCVlan | 1.3.6.1.4.1.2011.5.1.1.15.1.27 | Integer32 (0..4094) | RC | |
column · Integer32 (0..4094) · read-create · current The remarked ce-vlan ID. | ||||
| ChwAclAppliedRemark8021p | 1.3.6.1.4.1.2011.5.1.1.15.1.28 | Integer32 (0..7) | RC | |
column · Integer32 (0..7) · read-create · current The remarked 8021p value. | ||||
| ChwAclAppliedRemarkDscp | 1.3.6.1.4.1.2011.5.1.1.15.1.29 | Integer32 (0..63) | RC | |
column · Integer32 (0..63) · read-create · current The remarked DSCP value. | ||||
| ChwAclAppliedRemarkIpPre | 1.3.6.1.4.1.2011.5.1.1.15.1.30 | Integer32 (0..7) | RC | |
column · Integer32 (0..7) · read-create · current The remarked IP precedence value. | ||||
| ChwAclAppliedRemarkLocalPre | 1.3.6.1.4.1.2011.5.1.1.15.1.31 | Integer32 (0..7) | RC | |
column · Integer32 (0..7) · read-create · current The remarked local precedence value. | ||||
| ChwAclAppliedRemarkMacAddr | 1.3.6.1.4.1.2011.5.1.1.15.1.32 | MacAddress | RC | |
column · MacAddress · read-create · current The remarked MAC address. | ||||
| ChwAclAppliedIsIPv6Acl | 1.3.6.1.4.1.2011.5.1.1.15.1.33 | TruthValue | NA | |
column · TruthValue · not-accessible · current The object indicates whether is IPv6 ACL. | ||||
| ChwAclAppliedRowStatus | 1.3.6.1.4.1.2011.5.1.1.15.1.51 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus,Now support three state:CreateAndGo,Active,Destroy. | ||||
| ThwAclIpv6NumGroupTable | 1.3.6.1.4.1.2011.5.1.1.16 | NA | ||
table · not-accessible · current This table is used to query information about an ACL rule group, including the ACL configuration order, step length, and description. | ||||
| RhwAclIpv6NumGroupEntry | 1.3.6.1.4.1.2011.5.1.1.16.1 | NA | ||
row · not-accessible · current An entry containing characters of an IPv6 ACL group. | ||||
| ChwAclIpv6NumGroupAclNum | 1.3.6.1.4.1.2011.5.1.1.16.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The value of this object identifies a table index, representing the number of an IPv6 ACL rule group. The value range is as follows: Interface-based ACL6: 1000 to 1999 Basic ACL6: 2000 to 2999 Advanced ACL6: 3000 to 3999 Named ACL6: 42768 to 75535 | ||||
| ChwAclIpv6NumGroupMatchOrder | 1.3.6.1.4.1.2011.5.1.1.16.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current The object indicates the match order of rules. 'config' means matching ACL rules in the configuration sequence, 'auto' means the ACL6 rules are matched following the 'Depth-first' principle.
| ||||
| ChwAclIpv6NumGroupSubitemNum | 1.3.6.1.4.1.2011.5.1.1.16.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of the rules in the ACL6 group. | ||||
| ChwAclIpv6NumGroupCountClear | 1.3.6.1.4.1.2011.5.1.1.16.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current This object indicates whether to clear the statistics of an ACL6 rule group. cleared(1): clear notUsed(2): not clear This object is valid only when the Set operation is performed for this object.
| ||||
| ChwAclIpv6NumGroupAclName | 1.3.6.1.4.1.2011.5.1.1.16.1.5 | OCTET STRING (SIZE (0..64)) | RC | |
column · OCTET STRING (SIZE (0..64)) · read-create · current The object indicates the name of an acl6 group, The first character must be start with a to z or A to Z, and the length cannot exceed 64 character. | ||||
| ChwAclIpv6NumGroupDescription | 1.3.6.1.4.1.2011.5.1.1.16.1.6 | OCTET STRING (SIZE (0..127)) | RC | |
column · OCTET STRING (SIZE (0..127)) · read-create · current This object indicates the description of an ACL6 rule group. The description length cannot exceed 127 characters. | ||||
| ChwAclIpv6NumGroupAclType | 1.3.6.1.4.1.2011.5.1.1.16.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current The type of IPv6 ACL group.
| ||||
| ChwAclIpv6NumGroupRowStatus | 1.3.6.1.4.1.2011.5.1.1.16.1.51 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus, Now support three value: CreateAndGo, Active, Destroy. | ||||
| ChwAclIpv6NumGroupStep | 1.3.6.1.4.1.2011.5.1.1.16.1.52 | Integer32 (1..20) | RC | |
column · Integer32 (1..20) · read-create · current The object indicates the step value of number IPv6 ACL. Step here refers to the difference between each ID. For instance, given the step is set to 5, the IDs are the multiples of 5 beginning with 5. The IPv6 ACL IDs change along with the step. When the step is 5, the IPv6 ACL IDs are 5, 10, and 15 and so on. However, when the step is set to 2, the IDs turn to 2, 4, and 6 and so on. | ||||
| ThwAclIpv6IfRuleTable | 1.3.6.1.4.1.2011.5.1.1.17 | NA | ||
table · not-accessible · current Configure the rule for interface-based acl6 group. | ||||
| RhwAclIpv6IfRuleEntry | 1.3.6.1.4.1.2011.5.1.1.17.1 | NA | ||
row · not-accessible · current Each entry contains a rule of interface-based acl6 group. | ||||
| ChwAclIpv6IfAclNum | 1.3.6.1.4.1.2011.5.1.1.17.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of interface-based acl6 group, the index range is (1000..1999 | 42768..75535). | ||||
| ChwAclIpv6IfSubitem | 1.3.6.1.4.1.2011.5.1.1.17.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The object specifies the number of an ACL6 rule. If the number specified has been assigned to an ACL6 rule, the new rule will overwrite the old one, which is equal to editing the old rule. If the number is not assigned, the system will define a rule with the number and insert it to the place corresponding to its number. If no number is specified, the system will define a rule, assign a number to it and add it into the ACL6. It will be placed at the end of the ACL6 when configuration sequence is adopted; otherwise, it will be placed based on the 'Depth-first' principle. When ACL rules are following the 'Depth-first' principle, the number of an ACL6 rule must be given 0, but it will be assigned automatically; otherwise, this rule will not be created. | ||||
| ChwAclIpv6IfAct | 1.3.6.1.4.1.2011.5.1.1.17.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current The object indicates the action of an interface-based acl6 rule. 'deny' means discarding the packets that meet the condition, 'permit' means permitting the packets that meet the condition.
| ||||
| ChwAclIpv6IfIndex | 1.3.6.1.4.1.2011.5.1.1.17.1.4 | Integer32 | RC | |
column · Integer32 · read-create · current The object indicates the index of an interface. It specifies the interface information of the packets. The invalid interface index is 0. | ||||
| ChwAclIpv6IfAny | 1.3.6.1.4.1.2011.5.1.1.17.1.5 | TruthValue | RC | |
column · TruthValue · read-create · current The object indicates whether or not matching any interface. | ||||
| ChwAclIpv6IfTimeRangeIndex | 1.3.6.1.4.1.2011.5.1.1.17.1.6 | Integer32 (0..256) | RC | |
column · Integer32 (0..256) · read-create · current The value of this object identifies the index of the time range during which an ACL rule can be applied. When the current time is in the time range, the rule is valid. The value 0 is invalid, indicating that no time range is specified for the rule.The value ranges from 0 to 256. | ||||
| ChwAclIpv6IfLog | 1.3.6.1.4.1.2011.5.1.1.17.1.7 | TruthValue | RC | |
column · TruthValue · read-create · current The object indicates whether to log the matched packets. The log contents include sequence number of ACL6 rule, packets passed or discarded, upper layer protocol type over IP, source/destination address, source/destination port number, and number of packets. | ||||
| ChwAclIpv6IfEnable | 1.3.6.1.4.1.2011.5.1.1.17.1.8 | TruthValue | RO | |
column · TruthValue · read-only · current The object indicates whether the rule is valid or invalid. | ||||
| ChwAclIpv6IfCount | 1.3.6.1.4.1.2011.5.1.1.17.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current The object indicates the statistics of matched packets by basic rule. | ||||
| ChwAclIpv6IfRowStatus | 1.3.6.1.4.1.2011.5.1.1.17.1.11 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus,Now support three state:CreateAndGo,Active,Destroy. | ||||
| ThwAclMplsRuleTable | 1.3.6.1.4.1.2011.5.1.1.18 | NA | ||
table · not-accessible · current Configure the rule for mpls acl group. | ||||
| RhwAclMplsRuleEntry | 1.3.6.1.4.1.2011.5.1.1.18.1 | NA | ||
row · not-accessible · current Each entry is a rule of mpls acl. | ||||
| ChwAclMplsAclNum | 1.3.6.1.4.1.2011.5.1.1.18.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of mpls acl group, the index range is (10000..10999 | 42768..76535). | ||||
| ChwAclMplsSubitem | 1.3.6.1.4.1.2011.5.1.1.18.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The objects specifies the number of an ACL rule. If the number specified has been assigned to an ACL rule, the new rule will overwrite the old one, which is equal to editing the old rule. If the number is not assigned, the system will define a rule with the number and insert it to the place corresponding to its number. If no number is specified, the system will define a rule, assign a number to it and add it into the ACL. It will be placed at the end of the ACL when configuration sequence is adopted; otherwise, it will be placed based on the 'Depth-first' principle. When ACL rules are following the 'Depth-first' principle, the number of an ACL rule must be given 0, but it will be assigned by step automatically; otherwise, this rule will not be created. | ||||
| ChwAclMplsAct | 1.3.6.1.4.1.2011.5.1.1.18.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current The object indicates the action of a basic acl rule. 'deny' means discarding the packets that meet the condition, 'permit' means permitting the packets that meet the condition.
| ||||
| ChwAclMplsExp1 | 1.3.6.1.4.1.2011.5.1.1.18.1.4 | Integer32 (0..7 | 255) | RC | |
column · Integer32 (0..7 | 255) · read-create · current The value of this object identifies the EXP value in the first label of an MPLS packet. The value ranges from 0 to 7. The default value is 255. | ||||
| ChwAclMplsExp2 | 1.3.6.1.4.1.2011.5.1.1.18.1.5 | Integer32 (0..7 | 255) | RC | |
column · Integer32 (0..7 | 255) · read-create · current The value of this object identifies the EXP value in the second label of an MPLS packet. The value ranges from 0 to 7. The default value is 255. | ||||
| ChwAclMplsExp3 | 1.3.6.1.4.1.2011.5.1.1.18.1.6 | Integer32 (0..7 | 255) | RC | |
column · Integer32 (0..7 | 255) · read-create · current The value of this object identifies the EXP value in the third label of an MPLS packet. The value ranges from 0 to 7. The default value is 255. | ||||
| ChwAclMplsExp4 | 1.3.6.1.4.1.2011.5.1.1.18.1.7 | Integer32 (0..7 | 255) | RC | |
column · Integer32 (0..7 | 255) · read-create · current The value of this object identifies the EXP value in the fourth label of an MPLS packet. The value ranges from 0 to 7. The default value is 255. | ||||
| ChwAclMplsLabel1 | 1.3.6.1.4.1.2011.5.1.1.18.1.8 | Integer32 (-1 | 0..1048575) | RC | |
column · Integer32 (-1 | 0..1048575) · read-create · current The value of this object identifies the Label value in the first label of an MPLS packet. The value ranges from 0 to 1048575. The default value is -1. | ||||
| ChwAclMplsLabel2 | 1.3.6.1.4.1.2011.5.1.1.18.1.9 | Integer32 (-1 | 0..1048575) | RC | |
column · Integer32 (-1 | 0..1048575) · read-create · current The value of this object identifies the Label value in the second label of an MPLS packet. The value ranges from 0 to 1048575. The default value is -1. | ||||
| ChwAclMplsLabel3 | 1.3.6.1.4.1.2011.5.1.1.18.1.10 | Integer32 (-1 | 0..1048575) | RC | |
column · Integer32 (-1 | 0..1048575) · read-create · current The value of this object identifies the Label value in the third label of an MPLS packet. The value ranges from 0 to 1048575. The default value is -1. | ||||
| ChwAclMplsLabel4 | 1.3.6.1.4.1.2011.5.1.1.18.1.11 | Integer32 (-1 | 0..1048575) | RC | |
column · Integer32 (-1 | 0..1048575) · read-create · current The value of this object identifies the Label value in the fourth label of an MPLS packet. The value ranges from 0 to 1048575. The default value is -1. | ||||
| ChwAclMplsTTLOP1 | 1.3.6.1.4.1.2011.5.1.1.18.1.12 | INTEGER | RC | |
column · INTEGER · read-create · current The object indicates the ttl operation symbol of a mpls acl rule. It compares the operators of ttl value. 'lt' means less than, 'eq' means equal to, 'gt' means greater than, 'range' means between, 'invalid' means this operation of the ttl is invalid.
| ||||
| ChwAclMplsTTL1Begin | 1.3.6.1.4.1.2011.5.1.1.18.1.13 | Integer32 (0..255) | RC | |
column · Integer32 (0..255) · read-create · current The object indicates the begin value of a mpls ttl. | ||||
| ChwAclMplsTTL1End | 1.3.6.1.4.1.2011.5.1.1.18.1.14 | Integer32 (0..255) | RC | |
column · Integer32 (0..255) · read-create · current The object indicates the end value of a mpls ttl. | ||||
| ChwAclMplsTTLOP2 | 1.3.6.1.4.1.2011.5.1.1.18.1.15 | INTEGER | RC | |
column · INTEGER · read-create · current The object indicates the ttl operation symbol of a mpls acl rule. It compares the operators of ttl value. 'lt' means less than, 'eq' means equal to, 'gt' means greater than, 'range' means between, 'invalid' means this operation of the ttl is invalid.
| ||||
| ChwAclMplsTTL2Begin | 1.3.6.1.4.1.2011.5.1.1.18.1.16 | Integer32 (0..255) | RC | |
column · Integer32 (0..255) · read-create · current The object indicates the begin value of a mpls ttl. | ||||
| ChwAclMplsTTL2End | 1.3.6.1.4.1.2011.5.1.1.18.1.17 | Integer32 (0..255) | RC | |
column · Integer32 (0..255) · read-create · current The object indicates the end value of a mpls ttl. | ||||
| ChwAclMplsTTLOP3 | 1.3.6.1.4.1.2011.5.1.1.18.1.18 | INTEGER | RC | |
column · INTEGER · read-create · current The object indicates the ttl operation symbol of a mpls acl rule. It compares the operators of ttl value. 'lt' means less than, 'eq' means equal to, 'gt' means greater than, 'range' means between, 'invalid' means this operation of the ttl is invalid.
| ||||
| ChwAclMplsTTL3Begin | 1.3.6.1.4.1.2011.5.1.1.18.1.19 | Integer32 (0..255) | RC | |
column · Integer32 (0..255) · read-create · current The object indicates the begin value of a mpls ttl. | ||||
| ChwAclMplsTTL3End | 1.3.6.1.4.1.2011.5.1.1.18.1.20 | Integer32 (0..255) | RC | |
column · Integer32 (0..255) · read-create · current The object indicates the end value of a mpls ttl. | ||||
| ChwAclMplsRowStatus | 1.3.6.1.4.1.2011.5.1.1.18.1.21 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus, Now support three value: CreateAndGo, Active and Destroy. | ||||
| ChwAclMplsCount | 1.3.6.1.4.1.2011.5.1.1.18.1.22 | Counter64 | RO | |
column · Counter64 · read-only · current The object indicates the statistics of matched packets by the rule. | ||||
| ThwAclDomainNameConfigTable | 1.3.6.1.4.1.2011.5.1.1.19 | NA | ||
table · not-accessible · current Configure the domain name. | ||||
| RhwAclDomainNameConfigEntry | 1.3.6.1.4.1.2011.5.1.1.19.1 | NA | ||
| ChwAclDomainID | 1.3.6.1.4.1.2011.5.1.1.19.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The index of DomianName table, the index range is (0..31). | ||||
| ChwAclDomainName | 1.3.6.1.4.1.2011.5.1.1.19.1.2 | OCTET STRING (SIZE (3..127)) | RW | |
column · OCTET STRING (SIZE (3..127)) · read-write · current The domian name. | ||||
| ChwAclDomainNameConfigRowStatus | 1.3.6.1.4.1.2011.5.1.1.19.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current Row status,Two actions are used: createAndGo(4), destroy(6). | ||||
| ThwAclIPPoolTable | 1.3.6.1.4.1.2011.5.1.1.20 | NA | ||
table · not-accessible · current Configure the IP pool name. | ||||
| RhwAclIPPoolEntry | 1.3.6.1.4.1.2011.5.1.1.20.1 | NA | ||
| ChwAclIPPoolIndex | 1.3.6.1.4.1.2011.5.1.1.20.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of ACL IP pool table. | ||||
| ChwAclIPPoolName | 1.3.6.1.4.1.2011.5.1.1.20.1.2 | OCTET STRING (SIZE (0..32)) | RC | |
column · OCTET STRING (SIZE (0..32)) · read-create · current The IP pool name. | ||||
| ChwAclIPPoolRowStatus | 1.3.6.1.4.1.2011.5.1.1.20.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current Row status. | ||||
| ChwAclIPPoolApplyBGPPeer | 1.3.6.1.4.1.2011.5.1.1.20.1.4 | TruthValue | RC | |
column · TruthValue · read-create · current The object indicates whether or not BGP peers are applied. | ||||
| ThwAclIPPoolIPTable | 1.3.6.1.4.1.2011.5.1.1.21 | NA | ||
table · not-accessible · current Configure the IP address of IP pool. | ||||
| RhwAclIPPoolIPEntry | 1.3.6.1.4.1.2011.5.1.1.21.1 | NA | ||
row · not-accessible · current Each entry is a IP address of IP pool. | ||||
| ChwAclIPPoolIPPoolIndex | 1.3.6.1.4.1.2011.5.1.1.21.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the level 1 index, that is, the index of an IP address pool used by an ACL. | ||||
| ChwAclIPPoolIPIndex | 1.3.6.1.4.1.2011.5.1.1.21.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the level 2 index, that is, the index of an IPv4 address in an IP address pool used by an ACL. | ||||
| ChwAclIPPoolIPIpAdd | 1.3.6.1.4.1.2011.5.1.1.21.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current The object indicates the IP-address. | ||||
| ChwAclIPPoolIPIpWild | 1.3.6.1.4.1.2011.5.1.1.21.1.4 | IpAddress | RC | |
column · IpAddress · read-create · current The object indicates the IP-address wild. | ||||
| ChwAclIPPoolIPRowStatus | 1.3.6.1.4.1.2011.5.1.1.21.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current Row status. | ||||
| ThwAclPortPoolTable | 1.3.6.1.4.1.2011.5.1.1.22 | NA | ||
table · not-accessible · current Configure the port pool name. | ||||
| RhwAclPortPoolEntry | 1.3.6.1.4.1.2011.5.1.1.22.1 | NA | ||
| ChwAclPortPoolIndex | 1.3.6.1.4.1.2011.5.1.1.22.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of ACL port pool table. | ||||
| ChwAclPortPoolName | 1.3.6.1.4.1.2011.5.1.1.22.1.2 | OCTET STRING (SIZE (0..32)) | RC | |
column · OCTET STRING (SIZE (0..32)) · read-create · current The Port pool name. | ||||
| ChwAclPortPoolRowStatus | 1.3.6.1.4.1.2011.5.1.1.22.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current Row status. | ||||
| ThwAclPortPoolPortTable | 1.3.6.1.4.1.2011.5.1.1.23 | NA | ||
table · not-accessible · current Configure the port range of port pool. | ||||
| RhwAclPortPoolPortEntry | 1.3.6.1.4.1.2011.5.1.1.23.1 | NA | ||
row · not-accessible · current Each entry is a port range of port pool. | ||||
| ChwAclPortPoolPortPoolIndex | 1.3.6.1.4.1.2011.5.1.1.23.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the level 1 index, that is, the index of an ACL port pool. | ||||
| ChwAclPortPoolPortIndex | 1.3.6.1.4.1.2011.5.1.1.23.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the level 2 index, that is, the index of a port number in the ACL port pool. | ||||
| ChwAclPortPoolPortOp | 1.3.6.1.4.1.2011.5.1.1.23.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current Operator that compares port numbers in an ACL port pool. The options are as follows: lt (matching packets whose port number is smaller than the specified port number) eq (matching packets with the specified port number) gt (matching packets whose port number is greater than the specified port number) neq (matching packets whose port number is different from the specified port number) invalid (invalid rule matching operation) range (matching packets with a specified port number in a certain range). Only range requires two port numbers as the operand. Other values require only one port number as the operand.
| ||||
| ChwAclPortPoolPortNumBegin | 1.3.6.1.4.1.2011.5.1.1.23.1.4 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current The object indicates the begin port number. | ||||
| ChwAclPortPoolPortNumEnd | 1.3.6.1.4.1.2011.5.1.1.23.1.5 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current The object indicates the end port number. | ||||
| ChwAclPortPoolPortRowStatus | 1.3.6.1.4.1.2011.5.1.1.23.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current Row status. | ||||
| ThwAclIPPool6Table | 1.3.6.1.4.1.2011.5.1.1.24 | NA | ||
table · not-accessible · current Configure the IPv6 pool name. | ||||
| RhwAclIPPool6Entry | 1.3.6.1.4.1.2011.5.1.1.24.1 | NA | ||
| ChwAclIPPool6Index | 1.3.6.1.4.1.2011.5.1.1.24.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of ACL IPv6 pool table. | ||||
| ChwAclIPPool6Name | 1.3.6.1.4.1.2011.5.1.1.24.1.2 | OCTET STRING (SIZE (0..32)) | RC | |
column · OCTET STRING (SIZE (0..32)) · read-create · current The IPv6 pool name. | ||||
| ChwAclIPPool6ApplyBGPIPv6Peer | 1.3.6.1.4.1.2011.5.1.1.24.1.3 | TruthValue | RC | |
column · TruthValue · read-create · current The object indicates whether or not BGP IPv6 peers are applied. | ||||
| ChwAclIPPool6RowStatus | 1.3.6.1.4.1.2011.5.1.1.24.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current Row status. | ||||
| ThwAclIpv6UserRuleTable | 1.3.6.1.4.1.2011.5.1.1.25 | NA | ||
table · not-accessible · current Description. | ||||
| RhwAclIpv6UserRuleEntry | 1.3.6.1.4.1.2011.5.1.1.25.1 | NA | ||
| ChwAclIpv6UserAclNum | 1.3.6.1.4.1.2011.5.1.1.25.1.1 | Integer32 (3000..3999 | 42768..75535) | RO | |
column · Integer32 (3000..3999 | 42768..75535) · read-only · current The index of ipv6 User acl table, the index range is (3000..3999 | 42768..75535). | ||||
| ChwAclIpv6UserSubitem | 1.3.6.1.4.1.2011.5.1.1.25.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The object specifies the number of an ipv6 User ACL rule. | ||||
| ChwAclIpv6UserAct | 1.3.6.1.4.1.2011.5.1.1.25.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current The object indicates the action of an ipv6 User acl rule.
| ||||
| ChwAclIpv6UserProtocol | 1.3.6.1.4.1.2011.5.1.1.25.1.4 | Integer32 (0..255) | RC | |
column · Integer32 (0..255) · read-create · current The object indicates the protocol type of the rule. It specifies the protocol type over IP. The number of IPv6 protocol is 0. | ||||
| ChwAclIpv6UserSrcIp | 1.3.6.1.4.1.2011.5.1.1.25.1.5 | OCTET STRING (SIZE (16)) | RC | |
column · OCTET STRING (SIZE (16)) · read-create · current The object indicates the source IPv6-address of an ipv6 User acl rule. | ||||
| ChwAclIpv6UserSrcPrefix | 1.3.6.1.4.1.2011.5.1.1.25.1.6 | Integer32 (0..128) | RC | |
column · Integer32 (0..128) · read-create · current The object indicates the source IPv6-address prefix length of an ipv6 User acl rule. | ||||
| ChwAclIpv6UserSrcOp | 1.3.6.1.4.1.2011.5.1.1.25.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current The object indicates the source Port operation symbol of an ipv6 User acl
| ||||
| ChwAclIpv6UserSrcPort1 | 1.3.6.1.4.1.2011.5.1.1.25.1.8 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current The object indicates the fourth layer source port2. | ||||
| ChwAclIpv6UserSrcPort2 | 1.3.6.1.4.1.2011.5.1.1.25.1.9 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current The object indicates the source user group of an ipv6 User acl rule. | ||||
| ChwAclIpv6UserSrcUserGroup | 1.3.6.1.4.1.2011.5.1.1.25.1.10 | Integer32 | RC | |
column · Integer32 · read-create · current The object indicates the source passthrough domain of an ipv6 User acl rule. | ||||
| ChwAclIpv6UserSrcDomainId | 1.3.6.1.4.1.2011.5.1.1.25.1.11 | Integer32 | RC | |
column · Integer32 · read-create · current The object indicates the source passthrough domain Id of an ipv6 User acl rule. | ||||
| ChwAclIpv6UserSrcDomainName | 1.3.6.1.4.1.2011.5.1.1.25.1.12 | OCTET STRING (SIZE (3..127)) | RC | |
column · OCTET STRING (SIZE (3..127)) · read-create · current The object indicates the source passthrough domain of an ipv6 User acl rule. | ||||
| ChwAclIpv6UserDestIp | 1.3.6.1.4.1.2011.5.1.1.25.1.13 | OCTET STRING (SIZE (16)) | RC | |
column · OCTET STRING (SIZE (16)) · read-create · current The object indicates the destination IPv6-address of an ipv6 User acl rule. | ||||
| ChwAclIpv6UserDestPrefix | 1.3.6.1.4.1.2011.5.1.1.25.1.14 | Integer32 (0..128) | RC | |
column · Integer32 (0..128) · read-create · current The object indicates the destination IPv6-address prefix length of an ipv6 User acl rule. | ||||
| ChwAclIpv6UserDestOp | 1.3.6.1.4.1.2011.5.1.1.25.1.15 | INTEGER | RW | |
column · INTEGER · read-write · current The object indicates the destination Port operation symbol of an ipv6 User
| ||||
| ChwAclIpv6UserDestPort1 | 1.3.6.1.4.1.2011.5.1.1.25.1.16 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current The object indicates the fourth layer destination port1. | ||||
| ChwAclIpv6UserDestPort2 | 1.3.6.1.4.1.2011.5.1.1.25.1.17 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current The object indicates the fourth layer destination port2. | ||||
| ChwAclIpv6UserDestUserGroup | 1.3.6.1.4.1.2011.5.1.1.25.1.18 | Integer32 | RC | |
column · Integer32 · read-create · current The object indicates the destination user group of an ipv6 User acl rule. | ||||
| ChwAclIpv6UserDestDomainId | 1.3.6.1.4.1.2011.5.1.1.25.1.19 | Integer32 | RC | |
column · Integer32 · read-create · current The object indicates the destination passthrough domain of an ipv6 User acl rule. | ||||
| ChwAclIpv6UserDestDomainName | 1.3.6.1.4.1.2011.5.1.1.25.1.20 | OCTET STRING (SIZE (3..127)) | RW | |
column · OCTET STRING (SIZE (3..127)) · read-write · current The object indicates the destination passthrough domain of an ipv6 User acl rule. | ||||
| ChwAclIpv6UserPrecedence | 1.3.6.1.4.1.2011.5.1.1.25.1.21 | Integer32 (0..7 | 255) | RC | |
column · Integer32 (0..7 | 255) · read-create · current The object indicates the value of IPv6-packet's precedence, | ||||
| ChwAclIpv6UserTos | 1.3.6.1.4.1.2011.5.1.1.25.1.22 | Integer32 (0..15 | 255) | RC | |
column · Integer32 (0..15 | 255) · read-create · current The object indicates the value of IPv6-packet's TOS, | ||||
| ChwAclIpv6UserDscp | 1.3.6.1.4.1.2011.5.1.1.25.1.23 | Integer32 (0..63 | 255) | RC | |
column · Integer32 (0..63 | 255) · read-create · current The object indicates the value of frame.The invalid | ||||
| ChwAclIpv6UserEstablish | 1.3.6.1.4.1.2011.5.1.1.25.1.24 | INTEGER | RC | |
column · INTEGER · read-create · current The object indicates whether or not establishing.
| ||||
| ChwAclIpv6UserTimeRangeIndex | 1.3.6.1.4.1.2011.5.1.1.25.1.25 | Integer32 (0..256) | RC | |
column · Integer32 (0..256) · read-create · current The object indicates the time range of an ipv6 User acl rule. | ||||
| ChwAclIpv6UserIcmpType | 1.3.6.1.4.1.2011.5.1.1.25.1.26 | Integer32 (0..255 | 65535) | RC | |
column · Integer32 (0..255 | 65535) · read-create · current The object indicates the type of ICMPv6 packet. | ||||
| ChwAclIpv6UserIcmpCode | 1.3.6.1.4.1.2011.5.1.1.25.1.27 | Integer32 (0..255 | 65535) | RC | |
column · Integer32 (0..255 | 65535) · read-create · current The object indicates the code of ICMPv6 packet. | ||||
| ChwAclIpv6UserFragment | 1.3.6.1.4.1.2011.5.1.1.25.1.28 | INTEGER | RC | |
column · INTEGER · read-create · current The object indicates the type of the packet. 1: fragment, indicating that the packet is a fragment 255: none, invalid value This object cannot be modified once a rule is created.
| ||||
| ChwAclIpv6UserLog | 1.3.6.1.4.1.2011.5.1.1.25.1.29 | INTEGER | RW | |
column · INTEGER · read-write · current The object indicates whether to log the matched packets. The log contents include sequence number of ACL rule, packets passed or discarded, upper layer protocol type over IP, source/destination address, source/destination port number, and number of packets
| ||||
| ChwAclIpv6UserEnable | 1.3.6.1.4.1.2011.5.1.1.25.1.30 | INTEGER | RO | |
column · INTEGER · read-only · current The object indicates whether the rule is valid or invalid.
| ||||
| ChwAclIpv6UserCount | 1.3.6.1.4.1.2011.5.1.1.25.1.31 | Counter64 | RO | |
column · Counter64 · read-only · current The object indicates the statistics of matched packets by the rule. | ||||
| ChwAclIpv6UserVrfName | 1.3.6.1.4.1.2011.5.1.1.25.1.32 | OCTET STRING (SIZE (0..31)) | RC | |
column · OCTET STRING (SIZE (0..31)) · read-create · current The object indicates the VRF name of this rule, It specifies the VPN-instance to which the packet belongs. | ||||
| ChwAclIpv6UserDescription | 1.3.6.1.4.1.2011.5.1.1.25.1.33 | OCTET STRING (SIZE (0..127)) | RC | |
column · OCTET STRING (SIZE (0..127)) · read-create · current The object indicates the description of this IPv6 User rule. | ||||
| ChwAclIpv6UserRowStatus | 1.3.6.1.4.1.2011.5.1.1.25.1.34 | INTEGER | RC | |
column · INTEGER · read-create · current RowStatus, Now support three state: CreateAndGo, Active, Destroy.
| ||||
| ChwAclIpv6UserSrcModeType | 1.3.6.1.4.1.2011.5.1.1.25.1.35 | Integer32 (0..6) | RC | |
column · Integer32 (0..6) · read-create · current The object indicates ACL's mode type | ||||
| ChwAclIpv6UserDestModeType | 1.3.6.1.4.1.2011.5.1.1.25.1.36 | Integer32 (0..6) | RC | |
column · Integer32 (0..6) · read-create · current The object indicates ACL's mode type | ||||
| ThwAclIPPoolHostNameTable | 1.3.6.1.4.1.2011.5.1.1.26 | NA | ||
table · not-accessible · current Configure the host name of IP pool. | ||||
| RhwAclIPPoolHostNameEntry | 1.3.6.1.4.1.2011.5.1.1.26.1 | NA | ||
row · not-accessible · current Each entry is a host name of IP pool. | ||||
| ChwAclIPPoolHostIPPoolIndex | 1.3.6.1.4.1.2011.5.1.1.26.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the level 1 index, that is, the index of an IP address pool used by an ACL. | ||||
| ChwAclIPPoolHostNameIndex | 1.3.6.1.4.1.2011.5.1.1.26.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the level 2 index, that is, the index of an host name in an IP address pool used by an ACL. | ||||
| ChwAclIPPoolHostNameName | 1.3.6.1.4.1.2011.5.1.1.26.1.3 | OCTET STRING (SIZE (1..255)) | RC | |
column · OCTET STRING (SIZE (1..255)) · read-create · current The object indicates the host name. | ||||
| ChwAclIPPoolHostNameRowStatus | 1.3.6.1.4.1.2011.5.1.1.26.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current Row status. | ||||
| NhwAclMibTrap | 1.3.6.1.4.1.2011.5.1.2 | |||
| NhwAclTrapOid | 1.3.6.1.4.1.2011.5.1.2.1 | |||
| NhwAclTrapsDefine | 1.3.6.1.4.1.2011.5.1.2.2 | |||
| NhwAclTraps | 1.3.6.1.4.1.2011.5.1.2.2.1 | |||
| NhwAclResourceTrapsTable | 1.3.6.1.4.1.2011.5.1.2.2.1.1 | |||
| ShwAclResSlotStr | 1.3.6.1.4.1.2011.5.1.2.2.1.1.1 | OCTET STRING | AN | |
scalar · OCTET STRING · accessible-for-notify · current The infomation of slot. | ||||
| ShwAclResStage | 1.3.6.1.4.1.2011.5.1.2.2.1.1.2 | OCTET STRING | AN | |
scalar · OCTET STRING · accessible-for-notify · current The stage where trap infomation exists. | ||||
| ShwAclResLimit | 1.3.6.1.4.1.2011.5.1.2.2.1.1.3 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current The usage of rule resource. | ||||
| NhwAclResourceTrapsEntry | 1.3.6.1.4.1.2011.5.1.2.2.1.1.4 | |||
| !hwAclResThresholdExceedClearTrap | 1.3.6.1.4.1.2011.5.1.2.2.1.1.4.1 | |||
notification · current Acl resource lack clear trap
| ||||
| !hwAclResThresholdExceedTrap | 1.3.6.1.4.1.2011.5.1.2.2.1.1.4.2 | |||
| !hwAclResTotalCountExceedClearTrap | 1.3.6.1.4.1.2011.5.1.2.2.1.1.4.3 | |||
notification · current Acl resource full clear trap
| ||||
| !hwAclResTotalCountExceedTrap | 1.3.6.1.4.1.2011.5.1.2.2.1.1.4.4 | |||
| NhwAclResourceTrapsGroups | 1.3.6.1.4.1.2011.5.1.2.2.1.1.5 | |||
| GhwAclResourceTrapsGroup | 1.3.6.1.4.1.2011.5.1.2.2.1.1.5.1 | |||
group · current Group for all acl resource traps. | ||||
| NhwCounterResourceTrapsTable | 1.3.6.1.4.1.2011.5.1.2.2.1.2 | |||
| ShwCounterResSlotStr | 1.3.6.1.4.1.2011.5.1.2.2.1.2.1 | OCTET STRING | AN | |
scalar · OCTET STRING · accessible-for-notify · current The infomation of slot. | ||||
| ShwCounterResStage | 1.3.6.1.4.1.2011.5.1.2.2.1.2.2 | OCTET STRING | AN | |
scalar · OCTET STRING · accessible-for-notify · current The stage where trap infomation exists. | ||||
| ShwCounterResLimit | 1.3.6.1.4.1.2011.5.1.2.2.1.2.3 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current The usage of counter resource. | ||||
| NhwCounterResourceTrapsEntry | 1.3.6.1.4.1.2011.5.1.2.2.1.2.4 | |||
| !hwCounterResThresholdExceedClear | 1.3.6.1.4.1.2011.5.1.2.2.1.2.4.1 | |||
notification · current Acl counter resource lack clear trap | ||||
| !hwCounterResThresholdExceed | 1.3.6.1.4.1.2011.5.1.2.2.1.2.4.2 | |||
notification · current Acl counter resource lack trap | ||||
| !hwCounterResTotalCountExceedClear | 1.3.6.1.4.1.2011.5.1.2.2.1.2.4.3 | |||
notification · current Acl counter resource full clear trap | ||||
| !hwCounterResTotalCountExceed | 1.3.6.1.4.1.2011.5.1.2.2.1.2.4.4 | |||
notification · current Acl counter resource full trap | ||||
| NhwCounterResourceTrapsGroups | 1.3.6.1.4.1.2011.5.1.2.2.1.2.5 | |||
| GhwCounterResourceTrapsGroup | 1.3.6.1.4.1.2011.5.1.2.2.1.2.5.1 | |||
group · current Group for all acl counter resource traps. | ||||
| NhwMeterResourceTrapsTable | 1.3.6.1.4.1.2011.5.1.2.2.1.3 | |||
| ShwMeterResSlotStr | 1.3.6.1.4.1.2011.5.1.2.2.1.3.1 | OCTET STRING | AN | |
scalar · OCTET STRING · accessible-for-notify · current The infomation of slot. | ||||
| ShwMeterResStage | 1.3.6.1.4.1.2011.5.1.2.2.1.3.2 | OCTET STRING | AN | |
scalar · OCTET STRING · accessible-for-notify · current The stage where trap infomation exists. | ||||
| ShwMeterResLimit | 1.3.6.1.4.1.2011.5.1.2.2.1.3.3 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current The usage of meter resource. | ||||
| NhwMeterResourceTrapsEntry | 1.3.6.1.4.1.2011.5.1.2.2.1.3.4 | |||
| !hwMeterResThresholdExceedClear | 1.3.6.1.4.1.2011.5.1.2.2.1.3.4.1 | |||
notification · current Acl meter resource lack clear trap | ||||
| !hwMeterResThresholdExceed | 1.3.6.1.4.1.2011.5.1.2.2.1.3.4.2 | |||
notification · current Acl meter resource lack trap | ||||
| !hwMeterResTotalCountExceedClear | 1.3.6.1.4.1.2011.5.1.2.2.1.3.4.3 | |||
notification · current Acl meter resource full clear trap | ||||
| !hwMeterResTotalCountExceed | 1.3.6.1.4.1.2011.5.1.2.2.1.3.4.4 | |||
notification · current Acl meter resource full trap | ||||
| NhwMeterResourceTrapsGroups | 1.3.6.1.4.1.2011.5.1.2.2.1.3.5 | |||
| GhwMeterResourceTrapsGroup | 1.3.6.1.4.1.2011.5.1.2.2.1.3.5.1 | |||
group · current Group for all acl meter resource traps. | ||||
| NhwAclResourceInfoTrap | 1.3.6.1.4.1.2011.5.1.2.3 | |||
| !hwAclResourceOverloadTrap | 1.3.6.1.4.1.2011.5.1.2.3.1 | |||
notification · current The device acl resources were overloaded | ||||
| !hwAclResourceResumeTrap | 1.3.6.1.4.1.2011.5.1.2.3.2 | |||
notification · current The device acl resources were resumed | ||||
| !hwAclResourceEmptyTrap | 1.3.6.1.4.1.2011.5.1.2.3.3 | |||
notification · current The device acl resources were not enough | ||||
| NhwAclResourceItem | 1.3.6.1.4.1.2011.5.1.2.3.4 | |||
| ShwAclResourceTotal | 1.3.6.1.4.1.2011.5.1.2.3.4.1 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current The total num of rule resource. | ||||
| ShwAclResourceUsed | 1.3.6.1.4.1.2011.5.1.2.3.4.2 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current The used num of rule resource. | ||||
| ShwAclResourceUsage | 1.3.6.1.4.1.2011.5.1.2.3.4.3 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current The usage of rule resource. | ||||
| ShwAclResourceAlamInfo | 1.3.6.1.4.1.2011.5.1.2.3.4.4 | OCTET STRING | AN | |
scalar · OCTET STRING · accessible-for-notify · current The empty infomation of rule resource. | ||||
| NhwAclMibConformance | 1.3.6.1.4.1.2011.5.1.3 | |||
| NhwAclMibCompliances | 1.3.6.1.4.1.2011.5.1.3.1 | |||
| MhwAclMibCompliance | 1.3.6.1.4.1.2011.5.1.3.1.1 | |||
compliance · current The compliance statement for entities which implement the Huawei acl MIB.
| ||||
| NhwAclMibGroups | 1.3.6.1.4.1.2011.5.1.3.2 | |||
| GhwAclGroup | 1.3.6.1.4.1.2011.5.1.3.2.1 | |||
group · current A collection of objects providing mandatory acl information.
| ||||
Traps / Notifications
- hwAclResThresholdExceedClearTrap
1.3.6.1.4.1.2011.5.1.2.2.1.1.4.1 - hwAclResThresholdExceedTrap
1.3.6.1.4.1.2011.5.1.2.2.1.1.4.2 - hwAclResTotalCountExceedClearTrap
1.3.6.1.4.1.2011.5.1.2.2.1.1.4.3 - hwAclResTotalCountExceedTrap
1.3.6.1.4.1.2011.5.1.2.2.1.1.4.4 - hwAclResourceEmptyTrap
1.3.6.1.4.1.2011.5.1.2.3.3 - hwAclResourceOverloadTrap
1.3.6.1.4.1.2011.5.1.2.3.1 - hwAclResourceResumeTrap
1.3.6.1.4.1.2011.5.1.2.3.2 - hwCounterResThresholdExceed
1.3.6.1.4.1.2011.5.1.2.2.1.2.4.2 - hwCounterResThresholdExceedClear
1.3.6.1.4.1.2011.5.1.2.2.1.2.4.1 - hwCounterResTotalCountExceed
1.3.6.1.4.1.2011.5.1.2.2.1.2.4.4 - hwCounterResTotalCountExceedClear
1.3.6.1.4.1.2011.5.1.2.2.1.2.4.3 - hwMeterResThresholdExceed
1.3.6.1.4.1.2011.5.1.2.2.1.3.4.2 - hwMeterResThresholdExceedClear
1.3.6.1.4.1.2011.5.1.2.2.1.3.4.1 - hwMeterResTotalCountExceed
1.3.6.1.4.1.2011.5.1.2.2.1.3.4.4 - hwMeterResTotalCountExceedClear
1.3.6.1.4.1.2011.5.1.2.2.1.3.4.3