ColubrisAuthenticationMode INTEGERlocal(1) localAndProfile(3) profile(2)
Specifies the authentication mode to be used.
local: The authentication is done locally from the
device's local database information.
profile: An authentication profile is used in order to
retrieve the authentication parameters.
localAndProfile: The authentication is done locally
first. If it fails an authentication
profile is used.ColubrisDataRate INTEGERrate11Meg(7) rate12Meg(8) rate18Meg(9) rate1Meg(2) rate24Meg(10) rate2Meg(3) rate36Meg(11) rate48Meg(12) rate54Meg(13) rate5dot5Meg(4) rate6Meg(5) rate9Meg(6) rateHighestAvailable(14) rateLowestAvailable(1) unknown(0)
An enumeration of the different data rates supported on a per
VSC basis.
ColubrisNotificationEnable INTEGERdisable(2) enable(1)
Specifies the generation of notification traps.
enable: Enables the generation of the associated
notification.
disable: Disables the generation of the associated
notificationColubrisPriorityQueue INTEGERhigh(3) low(1) normal(2) veryHigh(4)
An enumeration of the different queues supported in the
QOS and Bandwidth control feature.
ColubrisProfileIndex Integer32 (1..2147483647)A profile index refers to an entry in the RADIUS server profile table.
ColubrisProfileIndexOrZero Integer32 (0..2147483647)A profile index refers to an entry in the RADIUS server
profile table. When the special value Zero is specified, no
RADIUS server profile is selected.
ColubrisRadioType INTEGERar2317(6) bcm43460(8) cm6(1) cm9(2) cus223(9) mb82(5) sunfish(3) xb114(7)
An enumeration of the different supported radio types.
ColubrisSSID OCTET STRING (SIZE (1..32))A generic service set identifier (SSID) convention is defined
here and used throughout the Colubris proprietary MIBs. This
specific textual convention is used for inputing SSIDs.ColubrisSSIDOrNone OCTET STRING (SIZE (0..32))A generic service set identifier (SSID) convention is defined
here and used throughout the Colubris proprietary MIBs. This
specific textual convention is used when displaying SSIDs.ColubrisSecurity INTEGERieee802dot1x(3) ieee802dot1xWithWep(4) none(1) unknown(0) wep(2) wpa(5) wpaPsk(6)
An enumeration of the different Security modes allowed
in the Colubris products.
NOTE: 'unknown'- Could not identify the protection mode.
'none' - No wireless protection.
'wep' - WEP (static keys).
'ieee802dot1x' - 802.1X no encryption.
'ieee802dot1xWithWep' - 802.1x + WEP (dynamic keys).
'wpa' - 802.1X + TKIP + Key source AAA profile.
'wpaPsk' - 802.1X + TKIP + Key Source Pre-Shared Key.ColubrisServerIndex Integer32 (1..2147483647)A server index refers to an entry in the RADIUS server table.
ColubrisServerIndexOrZero Integer32 (0..2147483647)A server index refers to an entry in the RADIUS server table.
When the special value Zero is specified, no RADIUS server
is selected.
ColubrisUsersAuthenticationMode INTEGERlocal(1) localAndProfile(3) none(0) profile(2)
Specifies the authentication mode to be used.
none: Users are not allowed to login.
local: User authentication is done via the
local user accounts.
profile: A third-party authentication server is used.
localAndProfile: Authentication is done locally
first. If it fails, a third-party
authentication server is used.ColubrisUsersAuthenticationType INTEGERhtml(3) ieee802dot1x(2) mac(1)
Specifies the authentication type to be used.
mac: Users are authenticated using their MAC addresses.
ieee802dot1x: Users authenticated through 802.1X.
html: Users authenticated via the HTML login page.