COLUBRIS-PUBLIC-ACCESS-MIB
Colubris Networks Inc.Colubris Networks Public Access MIB.
snmptranslate -m COLUBRIS-PUBLIC-ACCESS-MIB -Tpsnmpwalk -v2c -c <community> -m COLUBRIS-PUBLIC-ACCESS-MIB <host> 1.3.6.1.4.1.8744.5.1Imports
| COLUBRIS-SMI | colubrisMgmtV2 |
|---|---|
| COLUBRIS-TC | ColubrisNotificationEnable, ColubrisPriorityQueue, ColubrisProfileIndexOrZero, ColubrisSSIDOrNone, ColubrisSecurity, ColubrisUsersAuthenticationMode, ColubrisUsersAuthenticationType |
| IF-MIB | InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, MacAddress, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IcolubrisPublicAccessMIB | 1.3.6.1.4.1.8744.5.1 | |||
identity Colubris Networks Public Access MIB. | ||||
| NcolubrisPublicAccessMIBObjects | 1.3.6.1.4.1.8744.5.1.1 | |||
| NpublicAccessGroup | 1.3.6.1.4.1.8744.5.1.1.1 | |||
| SpublicAccessStatus | 1.3.6.1.4.1.8744.5.1.1.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Identifies the current status of the authentication system.
| ||||
| SpublicAccessStatusChangedCause | 1.3.6.1.4.1.8744.5.1.1.1.2 | OCTET STRING (SIZE (0..253)) | RO | |
scalar · OCTET STRING (SIZE (0..253)) · read-only · current Identifies the last cause of a status change. Mostly used by the publicAccessStatusChanged trap. | ||||
| NpublicAccessDeviceGroup | 1.3.6.1.4.1.8744.5.1.1.2 | |||
| SpublicAccessDeviceUserName | 1.3.6.1.4.1.8744.5.1.1.2.1 | OCTET STRING (SIZE (1..253)) | RW | |
scalar · OCTET STRING (SIZE (1..253)) · read-write · current Specifies the username that the device uses when authenticating itself to a RADIUS server. | ||||
| SpublicAccessDeviceUserPassword | 1.3.6.1.4.1.8744.5.1.1.2.2 | OCTET STRING (SIZE (0..230)) | RW | |
scalar · OCTET STRING (SIZE (0..230)) · read-write · current Specifies the password the device uses when authenticating to a RADIUS server. For security reasons, this should be set only if SNMP traffic is sent through a VPN tunnel. Reading this attribute will return an empty string. | ||||
| SpublicAccessDeviceSessionTimeoutAdminStatus | 1.3.6.1.4.1.8744.5.1.1.2.3 | Unsigned32 (1..9999) | RW | |
scalar · Unsigned32 (1..9999) · read-write · current Specifies the interval of time between two consecutive authentication attempts in minutes. At each successful authentication the device configuration is refreshed. This is not the time between RADIUS Access Request when an authentication is proceeding without answers. For that element, see the RADIUS Profile definition.
| ||||
| SpublicAccessDeviceSessionTimeoutOperStatus | 1.3.6.1.4.1.8744.5.1.1.2.4 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current Identifies the interval of time between two consecutive authentication attempts in seconds. At each successful authentication the device configuration is refreshed. This is not the time between RADIUS Access Request when an authentication is proceeding without answers. For that element, see the RADIUS Profile definition.
| ||||
| SpublicAccessDeviceConfigMode | 1.3.6.1.4.1.8744.5.1.1.2.5 | ColubrisUsersAuthenticationMode | RO | |
scalar · ColubrisUsersAuthenticationMode · read-only · current Identifies how configuration of the device is performed. This can be via locally configured settings on the device, or retrieved from a AAA server. If both options are enabled, the settings retrieved from the AAA server overwrite the local configuration settings. | ||||
| SpublicAccessDeviceAuthenProfileIndex | 1.3.6.1.4.1.8744.5.1.1.2.6 | ColubrisProfileIndexOrZero | RO | |
scalar · ColubrisProfileIndexOrZero · read-only · current Identifies the AAA server profile to use to authenticate the device. This attribute only applies when publicAccessDeviceConfigMode is set to 'profile' or 'localAndProfile'. When the special value zero is specified, no AAA server profile is selected. | ||||
| SpublicAccessDeviceAccountingEnabled | 1.3.6.1.4.1.8744.5.1.1.2.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current Identifies if accounting information is generated by the device and sent to the AAA server. The device generate RADIUS accounting of type ON and OFF. This also covers accounting of all access-lists independently of where they are used. For accounting, the following status types are generated: START, INTERIM-UPDATE, and STOP. Accounting information is generated only if a valid AAA server profile is configured in the publicAccessDeviceAccountingProfileIndex attribute.
| ||||
| SpublicAccessDeviceAccountingProfileIndex | 1.3.6.1.4.1.8744.5.1.1.2.8 | ColubrisProfileIndexOrZero | RO | |
scalar · ColubrisProfileIndexOrZero · read-only · current Identifies the AAA server profile to use for device accounting. This attribute only applies when publicAccessDeviceAccountingEnabled is set to 'enable'. When the special value zero is specified, the value set inside publicAccessDeviceAuthenProfileIndex is used instead. | ||||
| SpublicAccessDeviceForceReconfiguration | 1.3.6.1.4.1.8744.5.1.1.2.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current Specify forceReconfiguration(1) to force the device to re-read the local configuration file or re-issue an authentication request to the AAA server, or both based on the value of the publicAccessDeviceConfigMode attribute. Reading this object always returns 'idle'. Re-issuing an authentication only applies if a valid AAA server profile is specified in publicAccessDeviceAuthenProfileIndex.
| ||||
| NpublicAccessUsersGroup | 1.3.6.1.4.1.8744.5.1.1.3 | |||
| SpublicAccessUsersMaxCount | 1.3.6.1.4.1.8744.5.1.1.3.1 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current Indicates the maximum number of concurrent authenticated users. | ||||
| SpublicAccessUsersCount | 1.3.6.1.4.1.8744.5.1.1.3.2 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current Indicates the number of currently authenticated users. | ||||
| SpublicAccessUsersThreshold | 1.3.6.1.4.1.8744.5.1.1.3.3 | Unsigned32 | RW | |
scalar · Unsigned32 · read-write · current Specifies the trigger value for sending the publicAccessUsersThresholdTrap. When the number of users logged into the public access interface is equal to or exceeds this threshold value, a publicAccessUsersThresholdTrap is sent. The threshold value cannot exceed publicAccessUsersMaxCount or an error is returned. Set this to zero to disable sending of the publicAccessUsersThresholdTrap. | ||||
| SpublicAccessUsersSessionTrapEnabled | 1.3.6.1.4.1.8744.5.1.1.3.4 | ColubrisNotificationEnable | RW | |
scalar · ColubrisNotificationEnable · read-write · current When set to enable, the publicAccessUsersSessionStart and publicAccessUsersSessionStop traps are generated when a user session begins or ends. | ||||
| TpublicAccessUsersConfigTable | 1.3.6.1.4.1.8744.5.1.1.3.5 | NA | ||
table · not-accessible · current Provides information on the user's authentication method. In tabular form to allow multiple instances on an agent. | ||||
| RpublicAccessUsersConfigEntry | 1.3.6.1.4.1.8744.5.1.1.3.5.1 | NA | ||
| CpublicAccessUsersConfigIndex | 1.3.6.1.4.1.8744.5.1.1.3.5.1.1 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current Index of a user profile in the publicAccessUsersConfigTable. | ||||
| CpublicAccessUsersConfigAuthenType | 1.3.6.1.4.1.8744.5.1.1.3.5.1.2 | ColubrisUsersAuthenticationType | RO | |
column · ColubrisUsersAuthenticationType · read-only · current Indicates the mechanism used to authenticate users. | ||||
| CpublicAccessUsersConfigAuthenMode | 1.3.6.1.4.1.8744.5.1.1.3.5.1.3 | ColubrisUsersAuthenticationMode | RO | |
column · ColubrisUsersAuthenticationMode · read-only · current Specifies how the user authentication is performed. It can be done with the local user list or via a AAA server profile. If both are enabled, the local user list is checked first. | ||||
| CpublicAccessUsersConfigAuthenProfileIndex | 1.3.6.1.4.1.8744.5.1.1.3.5.1.4 | ColubrisProfileIndexOrZero | RO | |
column · ColubrisProfileIndexOrZero · read-only · current Specifies the AAA profile to use for user authentication when publicAccessUsersAuthenMode is set to 'profile' or 'localAndProfile'. | ||||
| CpublicAccessUsersConfigAuthenTimeout | 1.3.6.1.4.1.8744.5.1.1.3.5.1.5 | Unsigned32 (0..65535) | RO | |
column · Unsigned32 (0..65535) · read-only · current Logins are refused if the AAA server does not respond within this time period. Only applies when coVirtualApUserAccessAuthenMode is set to 'profile' or 'localAndProfile' and when the users are authenticated via 'HTML' or 'MAC' authentication.
| ||||
| CpublicAccessUsersConfigAccountingEnabled | 1.3.6.1.4.1.8744.5.1.1.3.5.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates if accounting information is generated by the device and sent to the AAA server for public access users. Accounting information is generated only if a valid AAA server profile is configured for publicAccessUsersAccountingProfileIndex.
| ||||
| CpublicAccessUsersConfigAccountingProfileIndex | 1.3.6.1.4.1.8744.5.1.1.3.5.1.7 | ColubrisProfileIndexOrZero | RO | |
column · ColubrisProfileIndexOrZero · read-only · current Identifies the AAA profile to send accounting to for public access users. When zero is specified, the value set inside publicAccessDeviceAuthenProfileIndex is used instead. | ||||
| CpublicAccessUsersConfigInterfaceIndex | 1.3.6.1.4.1.8744.5.1.1.3.5.1.8 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current Indicates the local interface on which these configuration parameters apply. This attribute is used with the publicAccessUsersConfigVirtualApProfileIndex to uniquely identify an entry in Virtual AP indexed tables. | ||||
| CpublicAccessUsersConfigVirtualApProfileIndex | 1.3.6.1.4.1.8744.5.1.1.3.5.1.9 | Integer32 (1..2147483647) | RO | |
column · Integer32 (1..2147483647) · read-only · current Indicates a user's VAP profile currently associated with these configuration parameters. This attribute is used with the publicAccessUsersConfigInterfaceIndex to uniquely identify an entry in Virtual AP indexed tables. | ||||
| TpublicAccessUserTable | 1.3.6.1.4.1.8744.5.1.1.3.6 | NA | ||
table · not-accessible · current A table containing specific information for users authenticated by the authentication system. In tabular form to allow multiple instances on an agent. | ||||
| RpublicAccessUserEntry | 1.3.6.1.4.1.8744.5.1.1.3.6.1 | NA | ||
row · not-accessible · current Information about a particular user that has been authenticated
by the authentication system.
publicAccessUserIndex - Uniquely identifies a user in the
table. | ||||
| CpublicAccessUserIndex | 1.3.6.1.4.1.8744.5.1.1.3.6.1.1 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current Index of a user in the publicAccessUserTable. | ||||
| CpublicAccessUserAuthenType | 1.3.6.1.4.1.8744.5.1.1.3.6.1.2 | ColubrisUsersAuthenticationType | RO | |
column · ColubrisUsersAuthenticationType · read-only · current Indicates the mechanism used to authenticate the user. | ||||
| CpublicAccessUserAuthenMode | 1.3.6.1.4.1.8744.5.1.1.3.6.1.3 | ColubrisUsersAuthenticationMode | RO | |
column · ColubrisUsersAuthenticationMode · read-only · current Specifies how user authentication is performed. It can be done using a local user list defined on the device or AAA server profile. If both modes are active the local user list is checked first. | ||||
| CpublicAccessUserState | 1.3.6.1.4.1.8744.5.1.1.3.6.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates the current state of the user.
| ||||
| CpublicAccessUserStationIpAddress | 1.3.6.1.4.1.8744.5.1.1.3.6.1.5 | IpAddress | RO | |
column · IpAddress · read-only · current Indicates the user's IP address. | ||||
| CpublicAccessUserName | 1.3.6.1.4.1.8744.5.1.1.3.6.1.6 | OCTET STRING (SIZE (0..253)) | RO | |
column · OCTET STRING (SIZE (0..253)) · read-only · current Indicates the user's name. | ||||
| CpublicAccessUserSessionStartTime | 1.3.6.1.4.1.8744.5.1.1.3.6.1.7 | DateAndTime | RO | |
column · DateAndTime · read-only · current Indicates when this user session was started. | ||||
| CpublicAccessUserSessionDuration | 1.3.6.1.4.1.8744.5.1.1.3.6.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current Indicates how long the user's session has been active. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.
| ||||
| CpublicAccessUserIdleTime | 1.3.6.1.4.1.8744.5.1.1.3.6.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current Indicates for how long the user's session has been idle. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.
| ||||
| CpublicAccessUserBytesSent | 1.3.6.1.4.1.8744.5.1.1.3.6.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current Indicates the total number of bytes sent by the user. When this counter reaches its maximum value, it wraps around and starts increasing again from zero. | ||||
| CpublicAccessUserBytesReceived | 1.3.6.1.4.1.8744.5.1.1.3.6.1.11 | Counter64 | RO | |
column · Counter64 · read-only · current Indicates the total number of bytes received by the user. When this counter reaches its maximum value, it wraps around and starts increasing again from zero. | ||||
| CpublicAccessUserPacketsSent | 1.3.6.1.4.1.8744.5.1.1.3.6.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current Indicates the total number of IP packets sent by the user. When this counter reaches its maximum value, it wraps around and starts increasing again from zero. | ||||
| CpublicAccessUserPacketsReceived | 1.3.6.1.4.1.8744.5.1.1.3.6.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current Indicates the total number of IP packets received by the user. When this counter reaches its maximum value, it wraps around and starts increasing again from zero. | ||||
| CpublicAccessUserForceDisconnection | 1.3.6.1.4.1.8744.5.1.1.3.6.1.14 | INTEGER | RW | |
column · INTEGER · read-write · current Setting this attribute to 'adminReset' disconnects the user with a cause of ADMIN_RESET. Reading this variable always return 'idle'.
| ||||
| CpublicAccessUserStationMacAddress | 1.3.6.1.4.1.8744.5.1.1.3.6.1.15 | MacAddress | RO | |
column · MacAddress · read-only · current Indicates the user's MAC Address. | ||||
| CpublicAccessUserApMacAddress | 1.3.6.1.4.1.8744.5.1.1.3.6.1.16 | MacAddress | RO | |
column · MacAddress · read-only · current Indicates the user's Access Point MAC Address when Location- Aware is enabled or the Access Controller MAC Address. | ||||
| CpublicAccessUserGroupName | 1.3.6.1.4.1.8744.5.1.1.3.6.1.17 | OCTET STRING (SIZE (0..64)) | RO | |
column · OCTET STRING (SIZE (0..64)) · read-only · current Indicates the user's Access Point Group Name (ONLY when Location-aware is enabled and properly configured). If this information is not available, a zero-Length string is returned. | ||||
| CpublicAccessUserSSID | 1.3.6.1.4.1.8744.5.1.1.3.6.1.18 | ColubrisSSIDOrNone | RO | |
column · ColubrisSSIDOrNone · read-only · current Indicates the user's Access Point SSID (ONLY when Location-aware is enabled and properly configured). If this information is not available, a zero-Length string is returned. | ||||
| CpublicAccessUserSecurity | 1.3.6.1.4.1.8744.5.1.1.3.6.1.19 | ColubrisSecurity | RO | |
column · ColubrisSecurity · read-only · current Specifies the user's security mode. | ||||
| CpublicAccessUserPHYType | 1.3.6.1.4.1.8744.5.1.1.3.6.1.20 | INTEGER | RO | |
column · INTEGER · read-only · current Specifies the user's radio type.
| ||||
| CpublicAccessUserVLAN | 1.3.6.1.4.1.8744.5.1.1.3.6.1.21 | Integer32 (0..4094) | RO | |
column · Integer32 (0..4094) · read-only · current Specifies the VLAN currently assigned to the user. | ||||
| CpublicAccessUserApRadioIndex | 1.3.6.1.4.1.8744.5.1.1.3.6.1.22 | Integer32 (0..2147483647) | RO | |
column · Integer32 (0..2147483647) · read-only · current Indicates the radio to which this user is associated. The index 0 is reserved when location aware is not enabled or not properly configured. It means that the system could not determine on which interface the user is connected. Please note that this information is not related to the standard SNMP interface table. It is a proprietary index information on the Radios in Colubris devices. | ||||
| CpublicAccessUserConfigIndex | 1.3.6.1.4.1.8744.5.1.1.3.6.1.23 | Integer32 (1..2147483647) | RO | |
column · Integer32 (1..2147483647) · read-only · current Indicates the configuration profile in the publicAccessUsersConfigTable currently associated with this user. When location aware is not enabled or not properly configured, the first SSID of the first radio interface is used as the default configuration profile. | ||||
| CpublicAccessUserConnectedInterface | 1.3.6.1.4.1.8744.5.1.1.3.6.1.24 | OCTET STRING (SIZE (0..10)) | AN | |
column · OCTET STRING (SIZE (0..10)) · accessible-for-notify · current Indicates the device's logical public interface to which the user is connected. This will always be a string containing 'br0'. | ||||
| CpublicAccessUserBytesSentDropped | 1.3.6.1.4.1.8744.5.1.1.3.6.1.25 | Counter64 | RO | |
column · Counter64 · read-only · current Indicates the total number of bytes sent by the user and dropped due to rate limitation. When this counter reaches its maximum value, it wraps around and starts increasing again from zero. | ||||
| CpublicAccessUserBytesReceivedDropped | 1.3.6.1.4.1.8744.5.1.1.3.6.1.26 | Counter64 | RO | |
column · Counter64 · read-only · current Indicates the total number of bytes received for the user and dropped due to rate limitation. When this counter reaches its maximum value, it wraps around and starts increasing again from zero. | ||||
| CpublicAccessUserPacketsSentDropped | 1.3.6.1.4.1.8744.5.1.1.3.6.1.27 | Counter32 | RO | |
column · Counter32 · read-only · current Indicates the total number of packets sent by the user and dropped due to rate limitation. When this counter reaches its maximum value, it wraps around and starts increasing again from zero. | ||||
| CpublicAccessUserPacketsReceivedDropped | 1.3.6.1.4.1.8744.5.1.1.3.6.1.28 | Counter32 | RO | |
column · Counter32 · read-only · current Indicates the total number of packets received for the user and dropped due to rate limitation. When this counter reaches its maximum value, it wraps around and starts increasing again from zero. | ||||
| CpublicAccessUserRateLimitationEnabled | 1.3.6.1.4.1.8744.5.1.1.3.6.1.29 | TruthValue | RO | |
column · TruthValue · read-only · current Specifies if rate limitation is enabled for the user. | ||||
| CpublicAccessUserMaxTransmitRate | 1.3.6.1.4.1.8744.5.1.1.3.6.1.30 | Integer32 (100..1000000) | RO | |
column · Integer32 (100..1000000) · read-only · current Specifies the maximum transmit rate for the user. | ||||
| CpublicAccessUserMaxReceiveRate | 1.3.6.1.4.1.8744.5.1.1.3.6.1.31 | Integer32 (100..1000000) | RO | |
column · Integer32 (100..1000000) · read-only · current Specifies the maximum receive rate for the user. | ||||
| CpublicAccessUserBandwidthControlLevel | 1.3.6.1.4.1.8744.5.1.1.3.6.1.32 | ColubrisPriorityQueue | RO | |
column · ColubrisPriorityQueue · read-only · current Specifies the user's bandwidth control level. | ||||
| CpublicAccessUserNASPort | 1.3.6.1.4.1.8744.5.1.1.3.6.1.33 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Specifies the NAS-Port value assigned to the user. | ||||
| SpublicAccessUsersLoggedInTrapEnabled | 1.3.6.1.4.1.8744.5.1.1.3.7 | ColubrisNotificationEnable | RW | |
scalar · ColubrisNotificationEnable · read-write · current When set to enable, the publicAccessUsersLoggedInTrap is generated. | ||||
| SpublicAccessUsersLoggedInTrapInterval | 1.3.6.1.4.1.8744.5.1.1.3.8 | Unsigned32 (0..1000000) | RW | |
scalar · Unsigned32 (0..1000000) · read-write · current Interval between publicAccessUsersLoggedInTrap traps. Setting this to 0 will disable periodic sending of these traps.
| ||||
| NpublicAccessNASPortsGroup | 1.3.6.1.4.1.8744.5.1.1.4 | |||
| SpublicAccessNASPortCount | 1.3.6.1.4.1.8744.5.1.1.4.1 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current Indicates the number of NAS-Port supported. | ||||
| TpublicAccessNASPortTable | 1.3.6.1.4.1.8744.5.1.1.4.2 | NA | ||
table · not-accessible · current A table containing specific information for NAS-Port by the Access Controller. In tabular form to allow multiple instances on an agent. | ||||
| RpublicAccessNASPortEntry | 1.3.6.1.4.1.8744.5.1.1.4.2.1 | NA | ||
row · not-accessible · current Information about a particular NAS-Port by Access Controller. publicAccessNASPortIndex - Uniquely identifies a NAS-Port in the table. | ||||
| CpublicAccessNASPortIndex | 1.3.6.1.4.1.8744.5.1.1.4.2.1.1 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current Index of a NAS-Port in the publicAccessNASPortTable. | ||||
| CpublicAccessNASPortUserName | 1.3.6.1.4.1.8744.5.1.1.4.2.1.2 | OCTET STRING (SIZE (0..253)) | RO | |
column · OCTET STRING (SIZE (0..253)) · read-only · current Indicates the user's name currently authenticated by the Access Controller on this NAS-Port. | ||||
| NpublicAccessMIBNotificationPrefix | 1.3.6.1.4.1.8744.5.1.2 | |||
| NpublicAccessMIBNotifications | 1.3.6.1.4.1.8744.5.1.2.0 | |||
| !publicAccessStatusChangedTrap | 1.3.6.1.4.1.8744.5.1.2.0.1 | |||
notification · current This notification is sent whenever the authentication system status changes (up or down). | ||||
| !publicAccessUsersThresholdTrap | 1.3.6.1.4.1.8744.5.1.2.0.2 | |||
notification · current This notification is sent whenever publicAccessUsersThreshold is exceeded.
| ||||
| !publicAccessUsersSessionStartTrap | 1.3.6.1.4.1.8744.5.1.2.0.3 | |||
notification · current When a user successfully authenticate a trap is generated if the publicAccessUsersSessionTrapEnabled is set to True.
| ||||
| !publicAccessUsersSessionStopTrap | 1.3.6.1.4.1.8744.5.1.2.0.4 | |||
notification · current When a user terminates their session a trap is generated if the publicAccessUsersSessionTrapEnabled is set to True.
| ||||
| !publicAccessUsersSessionFailTrap | 1.3.6.1.4.1.8744.5.1.2.0.5 | |||
notification · current When a user authentication fails a trap is generated if the publicAccessUsersSessionTrapEnabled is set to True.
| ||||
| !publicAccessUsersLoggedInTrap | 1.3.6.1.4.1.8744.5.1.2.0.6 | |||
notification · current This is sent when a user is authenticated or periodically (see publicAccessUSersLoggedInTrapInterval) if the publicAccessUsersLoggedInTrapEnabled is set to True. | ||||
| NcolubrisPublicAccessMIBConformance | 1.3.6.1.4.1.8744.5.1.3 | |||
| NcolubrisPublicAccessMIBCompliances | 1.3.6.1.4.1.8744.5.1.3.1 | |||
| McolubrisPublicAccessMIBCompliance | 1.3.6.1.4.1.8744.5.1.3.1.1 | |||
compliance · current The compliance statement for entities which implement the Colubris Public Access MIB. | ||||
| NcolubrisPublicAccessMIBGroups | 1.3.6.1.4.1.8744.5.1.3.2 | |||
| GcolubrisPublicAccessMIBGroup | 1.3.6.1.4.1.8744.5.1.3.2.1 | |||
group · current A collection of objects providing control over the Public Access MIB.
| ||||
| GcolubrisPublicAccessUserMIBGroup | 1.3.6.1.4.1.8744.5.1.3.2.2 | |||
group · current A collection of objects providing the Public Access MIB capability.
| ||||
| GcolubrisPublicAccessUserConfigMIBGroup | 1.3.6.1.4.1.8744.5.1.3.2.3 | |||
group · current A collection of objects providing the Public Access user configuration capability.
| ||||
| GcolubrisPublicAccessNotificationGroup | 1.3.6.1.4.1.8744.5.1.3.2.4 | |||
group · current A collection of supported notifications. | ||||
| GcolubrisPublicAccessNASPortsMIBGroup | 1.3.6.1.4.1.8744.5.1.3.2.5 | |||
group · current A collection of objects providing the Public Access NAS Port MIB capability.
| ||||
Traps / Notifications
- publicAccessStatusChangedTrap
1.3.6.1.4.1.8744.5.1.2.0.1 - publicAccessUsersLoggedInTrap
1.3.6.1.4.1.8744.5.1.2.0.6 - publicAccessUsersSessionFailTrap
1.3.6.1.4.1.8744.5.1.2.0.5 - publicAccessUsersSessionStartTrap
1.3.6.1.4.1.8744.5.1.2.0.3 - publicAccessUsersSessionStopTrap
1.3.6.1.4.1.8744.5.1.2.0.4 - publicAccessUsersThresholdTrap
1.3.6.1.4.1.8744.5.1.2.0.2