POWERSUPPLY-MIB
Hewlett-PackardThis MIB module is for representing switch power supply entity.
snmptranslate -m POWERSUPPLY-MIB -Tpsnmpwalk -v2c -c <community> -m POWERSUPPLY-MIB <host> 1.3.6.1.4.1.11.2.14.11.5.1.55Imports
| ENTITY-MIB | entPhysicalIndex |
|---|---|
| HP-ICF-OID | hpSwitch |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IhpicfPsMIB | 1.3.6.1.4.1.11.2.14.11.5.1.55 | ||||||||||||
identity This MIB module is for representing switch power supply entity. | |||||||||||||
| NhpicfEntityPs | 1.3.6.1.4.1.11.2.14.11.5.1.55.1 | ||||||||||||
| ThpicfPsTable | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.1 | NA | |||||||||||
table · not-accessible · current This table contains one row per switch power supply entity. | |||||||||||||
| RhpicfPsEntry | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1 | NA | |||||||||||
row · not-accessible · current Information about the power supply physical entity table.
| |||||||||||||
| ChpicfPsBayNum | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.1 | HpicfDcPsIndex | NA | ||||||||||
column · HpicfDcPsIndex · not-accessible · current The index of switch power supply entity. | |||||||||||||
| ChpicfPsState | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.2 | HpicfDcPsState | RO | 3 | |||||||||
column · HpicfDcPsState · read-only · current The physical state of the switch power supply entity. Example values from LibreNMS test devices
| |||||||||||||
| ChpicfPsFailures | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.3 | Counter32 | RO | 0 | |||||||||
column · Counter32 · read-only · current Number of times power supply has failed. Example values from LibreNMS test devices
| |||||||||||||
| ChpicfPsTemp | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.4 | Integer32 | RO | 27 | |||||||||
| ChpicfPsVoltageInfo | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.5 | SnmpAdminString (SIZE (0..32)) | RO | AC 120V/240V | |||||||||
column · SnmpAdminString (SIZE (0..32)) · read-only · current The voltage info and max current of power supply. e.g. AC 120V/220V. Example values from LibreNMS test devices
| |||||||||||||
| ChpicfPsWattageCur | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.6 | Integer32 | RO | 48 | |||||||||
| ChpicfPsWattageMax | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.7 | Integer32 | RO | 1100 | |||||||||
column · Integer32 · read-only · current The maximum wattage of the power supply. Example values from LibreNMS test devices
| |||||||||||||
| ChpicfPsLastCall | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.8 | Counter32 | RO | 10841186 | |||||||||
column · Counter32 · read-only · current The number of seconds since the switch power supply is up. Example values from LibreNMS test devices
| |||||||||||||
| ChpicfPsModel | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.9 | DisplayString (SIZE (1..32)) | RO | J9829A | |||||||||
column · DisplayString (SIZE (1..32)) · read-only · current This object provides the model number of the power supply unit and it is specified as the Jnumber. Example values from LibreNMS test devices
| |||||||||||||
| ThpicfXpsTable | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.2 | NA | |||||||||||
table · not-accessible · current This table contains one row per port of this zone of the external power supply. | |||||||||||||
| RhpicfXpsEntry | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1 | NA | |||||||||||
row · not-accessible · current Information about all the ports on the external power supply. On a stack, each member can be connected to the one of the ports of the external power supply. With entPhysicalIndex, the information about the required member can be obtained. | |||||||||||||
| ChpicfXpsConnectingPort | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current This is the port which connects the switch to the current zone of the external power supply. External power supply has 3 zones. In zone 1, user can connect upto 4 switches. In zones 2 and 3, user can connect upto 2 switches each. | |||||||||||||
| ChpicfXpsPortOperStatus | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Operating status of the port which connects the switch to the external power supply . By default, all the ports are enabled.
| |||||||||||||
| ChpicfXpsSwitchSerialNo | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1.3 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current This is the serial number of the switch connected to the current port of the external power supply. | |||||||||||||
| ChpicfXpsConnectionState | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1.4 | HpicfXpsConnectionStatus | RO | ||||||||||
column · HpicfXpsConnectionStatus · read-only · current The connection status between the external power supply and the switch. | |||||||||||||
| ChpicfXpsSysName | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1.5 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current This indicates the name of the system connected to the current port of the external power supply. | |||||||||||||
| ChpicfXpsMACAddress | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1.6 | MacAddress | RO | ||||||||||
column · MacAddress · read-only · current MAC address of the switch connected to the current port of the external power supply. | |||||||||||||
| ChpicfXpsSwitchOSVersion | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1.7 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current This MIB object specifies the OS version of the switch connected to the current port of the external power supply. | |||||||||||||
| ChpicfXpsSwitchIpsVoltage | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1.8 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Internal power supply voltage of the switch connected to this port of the external power supply.
| |||||||||||||
| ChpicfXpsSwitchIpsWattage | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1.9 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Internal power supply wattage of the switch connected to this port of the external power supply.
| |||||||||||||
| ChpicfXpsPower | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1.10 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The power allocated from the external power supply to the switch connected to this port. External power is available when both the internal power supply and external power supply are operational. The amount of available external power is dependent on the external power supply and the power domain configuration.
| |||||||||||||
| ChpicfXpsSupportedCableVersion | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1.11 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Cable record version supported by the switch software of the switch connected to the current cable. This object will be useful for debugging when switches connected to a common zone has different versions. | |||||||||||||
| ChpicfXpsSupportedZoneVersion | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1.12 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Zone record version supported by the switch software of the switch connected to the current port of the external power supply. Configurations are not allowed if there is any mismatch between supported zone version and hpicfXpsZoneRecordVersion. | |||||||||||||
| ChpicfXpsSwitchModType | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1.13 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current J number of the switch connected to the current cable of external power supply. | |||||||||||||
| ThpicfXpsSwitchConfigTable | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.3 | NA | |||||||||||
table · not-accessible · current This table contains one row per system which is connected to the external power supply. | |||||||||||||
| RhpicfXpsSwitchConfigEntry | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.3.1 | NA | |||||||||||
row · not-accessible · current This provides the configuration information of the switch that is connected to external power supply.
| |||||||||||||
| ChpicfXpsSwitchAdminStatus | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.3.1.1 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Administrative status of the switch that is connected to the external power supply.By default, the status is enabled and the switch will receive backup power and additional PoE power upon connecting to the external power supply.
| |||||||||||||
| ChpicfXpsSwitchAutoRecovery | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.3.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The status of external power supply auto recovery on the switch that is currently connected to the external power supply.By default, auto-recovery feature is enabled on the switch and there is automatic recovery after after external power supply reboot or after external power supply becomes available.
| |||||||||||||
| ChpicfXpsAllowPortsSupported | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.3.1.3 | Unsigned32 (2..4) | RW | ||||||||||
column · Unsigned32 (2..4) · read-write · current From this object, the amount of PoE power allocated to the current switch can be reduced, which might turn off some of the low priority PoE ports. This object can be set only on a PoE switch. When the new switch is being added to the current zone of the external power supply , the amount of external power allocated for this switch will be reduced. This object will make sure that the PoE ports that will be powered by the new power will not be impacted when the power share map is changed. This object always returns 0 on read operation. The set request for this object is blocked if any external power supply configuration is in progress. | |||||||||||||
| ChpicfXpsReset | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.3.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates the type of reset operation that will be performed on the current zone of the external power supply. All the configurations can be restored to factory default settings with 'factoryReset' option, which might turn off some of the low Priority powered PoE ports. The set request for this object is blocked if any external power supply configuration is in progress. Set request for this object will take longer time for completion. Status of a successful set request can be read from hpicfXpsResetReqStatus object.
| |||||||||||||
| ChpicfXpsType | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.3.1.5 | OCTET STRING (SIZE (0..255)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..255)) · read-only · current The name of the external power supply. | |||||||||||||
| ChpicfXpsSerialNum | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.3.1.6 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current The serial number of the external power supply. | |||||||||||||
| ChpicfXpsModuleName | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.3.1.7 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current This indicates the J number of the external power supply. | |||||||||||||
| ChpicfXpsPowerShareReqStatus | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.3.1.8 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Status of the external power supply power share request.
Set requests for hpicfXpsPowerDistMap will take longer
time for completion.This object can be used to get the
status of the set request. The following are the possible
values for the object:
idle - no set request has been issued.
inProgress - configuration request is being processed.
success - configuration request is successful.
failed - configuration request failed.
| |||||||||||||
| ChpicfXpsResetReqStatus | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.3.1.9 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Status of the external power supply reset request.
Set requests for hpicfXpsReset will take longer time for completion.
This object can be used to get the status of the set request. The following
are the possible values for the object:
idle - no set request has been issued.
inProgress - configuration request is being processed.
success - configuration request is successful.
failed - configuration request failed.
| |||||||||||||
| ThpicfXpsZoneTable | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.4 | NA | |||||||||||
table · not-accessible · current This table contains one row per zone of the external power supply. | |||||||||||||
| RhpicfXpsZoneEntry | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.4.1 | NA | |||||||||||
row · not-accessible · current Information about this zone of external power supply.
| |||||||||||||
| ChpicfXpsZoneNo | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.4.1.1 | Unsigned32 (1..3) | RO | ||||||||||
column · Unsigned32 (1..3) · read-only · current This indicates the zone number of the external power supply. The external power supply has 3 zones. | |||||||||||||
| ChpicfXpsZoneState | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.4.1.2 | HpicfXpsZoneStatus | RO | ||||||||||
column · HpicfXpsZoneStatus · read-only · current Physical state of the current zone of the external power supply. | |||||||||||||
| ChpicfXpsZonePowerShareMap | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.4.1.3 | OCTET STRING (SIZE (0..255)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..255)) · read-write · current This indicates the power share map on the current zone. The map indicates the ports on the external power supply that is configured to deliver power to the connected switches. Zone 1 has 4 ports: A-D. Zone 2 and 3 have only 2 ports: A-B. Within the map, the most significant bit represents port D And the least significant bit represents port A. If a bit is set to 1, then the given port is enabled on this zone. By default, all the bits are enabled in this map.Set requests for this object will take longer time for completion. Status of the set request can be read from hpicfXpsPowerShareReqStatus object. Modifications to power share map needs additional force option which depends on hpicfXpsZonePowerShareForce. | |||||||||||||
| ChpicfXpsZoneVoltage | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.4.1.4 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The voltage information of the external power supply in this zone.
| |||||||||||||
| ChpicfXpsZoneWattage | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.4.1.5 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The wattage information of the current zone of the external power supply.
| |||||||||||||
| ChpicfXpsPSURev | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.4.1.6 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current This indicates the revision number of the power supply unit that resides in this zone. | |||||||||||||
| ChpicfXpsPSUModule | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.4.1.7 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current This indicates the J number of the power supply unit that resides in this zone. | |||||||||||||
| ChpicfXpsZonePowerShareForce | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.4.1.8 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current When this option is set as true then hpicfXpsZonePowerShar will change in un-graceful manner where all low priority P devices connected to these ports will be shut-down tempora When this option is set as false then hpicfXpsZonePowerSha will change in graceful manner where low priority POE devi connected to it will not be affected. Walkmib or getmib on will always return false. | |||||||||||||
| ChpicfXpsZoneRecordVersion | 1.3.6.1.4.1.11.2.14.11.5.1.55.1.4.1.9 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Zone record version of the current zone of external power supply. This object is needed for debugging purpose when there is a difference between hpicfXpsSupportedZoneVersion and this object. Configurations are not allowed if there is any mismatch between hpicfXpsSupportedZoneVersion and this object. | |||||||||||||
| NhpicfPsConformance | 1.3.6.1.4.1.11.2.14.11.5.1.55.2 | ||||||||||||
| NhpicfPsCompliance | 1.3.6.1.4.1.11.2.14.11.5.1.55.2.1 | ||||||||||||
| MhpicfDcPsCompliance | 1.3.6.1.4.1.11.2.14.11.5.1.55.2.1.1 | deprecated | |||||||||||
compliance · deprecated The compliance statement for entries which implement the POWER SUPPLY MIB.
| |||||||||||||
| MhpicfXpsCompliance | 1.3.6.1.4.1.11.2.14.11.5.1.55.2.1.2 | ||||||||||||
compliance · current The compliance statement for the external power supply mib.
| |||||||||||||
| MhpicfXpsZoneCompliance | 1.3.6.1.4.1.11.2.14.11.5.1.55.2.1.3 | ||||||||||||
compliance · current The compliance statement for the zone MIB.
| |||||||||||||
| MhpicfDcPsCompliance1 | 1.3.6.1.4.1.11.2.14.11.5.1.55.2.1.4 | ||||||||||||
compliance · current The compliance statement for entries which implement the POWER SUPPLY MIB.
| |||||||||||||
| NhpicfPsGroups | 1.3.6.1.4.1.11.2.14.11.5.1.55.2.2 | ||||||||||||
| GhpicfPsGroup | 1.3.6.1.4.1.11.2.14.11.5.1.55.2.2.1 | deprecated | |||||||||||
group · deprecated POWER SUPPLY parameters | |||||||||||||
| GhpicfXpsGroup | 1.3.6.1.4.1.11.2.14.11.5.1.55.2.2.2 | ||||||||||||
group · current External power supply parameters.
| |||||||||||||
| GhpicfXpsZoneGroup | 1.3.6.1.4.1.11.2.14.11.5.1.55.2.2.3 | ||||||||||||
group · current External power supply zone parameters | |||||||||||||
| GhpicfPsGroup1 | 1.3.6.1.4.1.11.2.14.11.5.1.55.2.2.4 | ||||||||||||
group · current A collection of objects providing information about the power supply unit. | |||||||||||||
Textual conventions
HpicfDcPsIndexUnsigned32Display hint:
dA unique value that serves as index to identify the power supply.
HpicfDcPsStateINTEGERpsAuxFailure(7)psAuxNotPowered(9)psFailed(4)psMax(6)psNotPlugged(2)psNotPowered(8)psNotPresent(1)psPermFailure(5)psPowered(3)An enumerated value which provides the state of the switch power supply entity.
HpicfXpsConnectionStatusINTEGERactive(3)autoDisabled(8)available(2)cannotPower(7)mismatch(4)notConnected(0)notReady(5)overCurrent(6)unavailable(1)An enumerated value which provides the state of the connection between the switch and external power supply.
HpicfXpsZoneStatusINTEGERfaulted(3)inReset(5)notConnected(1)notReady(2)powered(4)An enumerated value which provides the state of the current zone of the external power supply.