HP-USER-AUTH
Hewlett-PackardThis MIB module contains the definitions of Managed Objects for various subsystems that perform user authentication. The subsystems under control by this MIB are: WebAuth - Web-based login authentication MacAuth - MAC address-based authentication CLI Password - CLI-based login authentication
snmptranslate -m HP-USER-AUTH -Tpsnmpwalk -v2c -c <community> -m HP-USER-AUTH <host> 1.3.6.1.4.1.11.2.14.11.5.1.19Imports
| HP-AUTZ-MIB | HpAutzUserRoleName |
|---|---|
| HP-ICF-OID | hpSwitch |
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| Q-BRIDGE-MIB | VlanIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IhpicfUsrAuthMIB | 1.3.6.1.4.1.11.2.14.11.5.1.19 | |||
identity This MIB module contains the definitions of Managed Objects for various subsystems that perform user authentication. The subsystems under control by this MIB are: WebAuth - Web-based login authentication MacAuth - MAC address-based authentication CLI Password - CLI-based login authentication | ||||
| NhpicfUsrAuthNotifications | 1.3.6.1.4.1.11.2.14.11.5.1.19.0 | |||
| !hpicfUsrAuthCLIAuthFail | 1.3.6.1.4.1.11.2.14.11.5.1.19.0.1 | |||
notification · current This notification signifies that CLI password authentication has failed. Operational control of this notification is provided using hpicfUsrAuthCliNotifyEnable. Agents complying with hpicfUsrAuthCompliance6 always additionally include hpicfUsrAuthLastLoginStatus. They may include hpicfUsrAuthLastLoginNotifyAddrType and hpicfUsrAuthLastLoginNotifyAddr to identify the source of the login attempt. They may also include an instance of hpicfUsrAuthLastLoginGeneration. The hpicfUsrAuthLastLoginEntry index in this object may be used to retrieve other objects in the row that identify the target user of this login attempt. If this index is zero, then the login attempt was to an unknown username. The value of hpicfUsrAuthLastLoginGeneration supplied in the notification should be compared to the retrieved object value to ensure that the row has not changed since the notification was sent. | ||||
| !hpicfUsrAuthPasswdChng | 1.3.6.1.4.1.11.2.14.11.5.1.19.0.2 | |||
notification · current An hpicfUsrAuthPasswdChng notification signifies that the manager password has been changed. The value of hpicfUsrAuthCLIPasswdSet can be used to determine whether the password has been set or cleared by this action. | ||||
| !hpicfPortSecAuthFailure | 1.3.6.1.4.1.11.2.14.11.5.1.19.0.3 | |||
notification · current This notification indicates a failed Port Security (network access) authentication event. | ||||
| NhpicfUsrAuthSystem | 1.3.6.1.4.1.11.2.14.11.5.1.19.1 | |||
| ShpicfUsrAuthWebAuthDhcpBaseAddress | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.1 | IpAddress | RW | |
scalar · IpAddress · read-write · current For all ports running with web authentication enabled: Specifies the base address that should be used by the switch DHCP server for web-based authentication purposes. | ||||
| ShpicfUsrAuthWebAuthDhcpMask | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.2 | IpAddress | RW | |
scalar · IpAddress · read-write · current For all ports running with web authentication enabled: Specifies the subnet mask to be used in conjunction with the DHCP base address when servicing DHCP requests. Allowable mask range is 255.255.240.0 (20) to 255.255.255.0 (24). | ||||
| ShpicfUsrAuthWebAuthDhcpLease | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.3 | Integer32 (1..30) | RW | |
scalar · Integer32 (1..30) · read-write · current For all ports running with web authentication enabled: Specifies the DHCP lease length in seconds. | ||||
| ShpicfUsrAuthMacAuthAddrFormat | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current For all ports running with MAC authentication
enabled: Specifies the MAC address format to use
in the RADIUS access-request, as follows:
'noDelimiter' - Sends MAC address in aabbccddeeff format
'singleDash' - Sends MAC address in aabbcc-ddeeff format
'multiDash' - Sends MAC address in aa-bb-cc-dd-ee-ff format
'multiColon' - Sends MAC address in aa:bb:cc:dd:ee:ff format
'noDelimiterUppercase' - Sends MAC address in AABBCCDDEEFF format
'singleDashUppercase' - Sends MAC address in AABBCC-DDEEFF format
'multiDashUppercase' - Sends MAC address in AA-BB-CC-DD-EE-FF format
'multiColonUppercase' - Sends MAC address in AA:BB:CC:DD:EE:FF format
The default value is noDelimiter(1).
| ||||
| ShpicfUsrAuthCliNotifyEnable | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current The operational status of hpicfUsrAuthCliAuthFail notifications. The default value is 1 (Enabled). A value of 2 represents Disabled. Writing this object requires authentication, such as provided by SNMPv3.
| ||||
| ShpicfUsrAuthCLIInterface | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.6 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current The physical interface, network protocol, or other authentication type that is associated with this notification.
| ||||
| ShpicfUsrAuthCLIPasswdSet | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.7 | TruthValue | AN | |
scalar · TruthValue · accessible-for-notify · current Indicates whether the CLI manager password is set. 1 indicates True while 2 indicates False. | ||||
| ShpicfUsrAuthCLIFailCnt | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.8 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current The count of hpicfUsrAuthPasswdFail notifications sent by the hpicfUsrAuth entity to the SNMP entity. The actual count of notifications sent by SNMP may be lower due to rate limiting or configuration. | ||||
| ShpicfUsrAuthCLIPwdNotifyCnt | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.9 | Unsigned32 | AN | |
scalar · Unsigned32 · accessible-for-notify · current A count of CLI password change notifications sent from the Auth entity to the SNMP entity within the switch. This count may therefore differ from the count of notifications actually sent by the SNMP entity due to switch configuration (e.g., the value of hpicfUsrAuthNotifyEnable.) | ||||
| ShpicfUsrAuthWMAFailCnt | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.10 | Unsigned32 | AN | |
scalar · Unsigned32 · accessible-for-notify · current The count of hpicfPortSecAuthFailure notifications sent by the hpicfUsrAuth entity to the SNMP entity. The actual count of notifications sent by SNMP may be lower due to rate limiting or configuration. | ||||
| ShpicfUsrAuthWMAFailMAC | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.11 | MacAddress | AN | |
scalar · MacAddress · accessible-for-notify · current The MAC address supplied in the failed authentication request. | ||||
| ShpicfUsrAuthWMAFailPort | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.12 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current The port index of the failed authentication request. | ||||
| ShpicfUsrAuthWMAFailVlan | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.13 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current The VLAN ID associated with the failed authentication request. | ||||
| ShpicfUsrAuthPortSecNotifyEnable | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.14 | INTEGER | RW | |
scalar · INTEGER · read-write · current Provides operational control of hpicfPortSecAuthFailure notification. When enabled (1), the notification will be sent. When disabled (2), the notification will not be sent. Setting this object requires authentication, such as provided by SNMPv3.
| ||||
| ShpicfUsrAuthPasswdNotifyEnable | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.15 | INTEGER | RW | |
scalar · INTEGER · read-write · current Provides operational control of hpicfUsrAuthPasswdChng notification. When enabled (1), the notification will be sent. When disabled (2), the notification will not be sent. Setting this object requires authentication, such as provided by SNMPv3.
| ||||
| ThpicfUsrAuthWMAEWAServerTable | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.16 | NA | ||
table · not-accessible · current A table of the Enhanced Web Auth servers. | ||||
| RhpicfUsrAuthWMAEWAServerEntry | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.16.1 | NA | ||
row · not-accessible · current Addresses for an Enhanced Web Auth server. | ||||
| ChpicfUsrAuthWMAeWAServerIndex | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.16.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current Index into hpicfUsrAuthWMAEWAServerTable. | ||||
| ChpicfUsrAuthWMAeWAServerIPAddressType | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.16.1.2 | InetAddressType | RC | |
column · InetAddressType · read-create · current The type of Enhanced Web Auth Server Address. | ||||
| ChpicfUsrAuthWMAeWAServerIPAddress | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.16.1.3 | InetAddress | RC | |
column · InetAddress · read-create · current The IP address of the Enhanced Web Auth Server. If set to 0.0.0.0 or URL not configured no Enhanced Web Auth Server will run. | ||||
| ChpicfUsrAuthWMAeWAServerPath | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.16.1.4 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current The Enhanced Web Auth Server Path for the location of the Enhanced Web Auth Pages. If not configured the default path will be used. | ||||
| ChpicfUsrAUthWMAeWAServerRowStatus | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.16.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current This marks the row as active/inactive. | ||||
| ThpicfUsrAuthRedirectServerTable | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.17 | NA | ||
table · not-accessible · current A table of the authentication Redirect Servers. | ||||
| RhpicfUsrAuthRedirectServerEntry | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.17.1 | NA | ||
row · not-accessible · current Attributes of an authentication Redirect Server. | ||||
| ChpicfUsrAuthRedirectServerIndex | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.17.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current Index into hpicfUsrAuthRedirectServerTable. | ||||
| ChpicfUsrAuthRedirectServerURL | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.17.1.2 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current This object represents the authentication Redirect Server's complete URL for the location of the redirect server login or warning page. This value must begin with 'http://' or 'https://' and should include the DNS name, TCP port of the server if not 80 or SSL's 443, and the page path, if necessary. | ||||
| ChpicfUsrAuthRedirectServerRowStatus | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.17.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the status of this entry. Must NOT be active in order to modify some other column of this config entry. | ||||
| ShpicfUsrAuthRedirectServerRestrictiveFilter | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.18 | INTEGER | RW | |
scalar · INTEGER · read-write · current If enabled, only the configured initial web page will be returned for all client requests. The enabled state would generally be used to simply display an informative warning message to failed macAuth clients. If disabled, all client/redirect-server http traffic will be permitted.
| ||||
| ShpicfUsrAuthRedirectServerClientTimeout | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.19 | Integer32 | RW | |
scalar · Integer32 · read-write · current The time (in seconds) that a client will be left in the unauthorized authentication redirection state before being removed from the state tables, temporarily suspending further client/redirect-server http traffic. After state table removal, client is free to initiate authentication. | ||||
| ShpicfUsrAuthRedirectServerAuthFailureStats | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.20 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of times clients fail authentication and initiate the authentication Redirect Server process since reboot. A single client can be counted multiple times. | ||||
| ShpicfUsrAuthCacheCredTimeOut | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.21 | Integer32 | RW | |
scalar · Integer32 · read-write · current Specifies the time in seconds, that the switch should remove the credentials. Reauthentication should take place with in small amount of time. | ||||
| ThpicfUsrAuthClientReauthenticateTable | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.22 | NA | ||
table · not-accessible · current A table containing configuration/control variables indexed by port and client MAC. | ||||
| RhpicfUsrAuthClientReauthenticateEntry | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.22.1 | NA | ||
row · not-accessible · current The table entry provides the means by which a client on an authentication interface can be forced to reauthenticate. | ||||
| ChpicfUsrAuthClientReauthenticateInterfaceIndex | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.22.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Index of client interfaces. | ||||
| ChpicfUsrAuthClientReauthenticateMacAddress | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.22.1.2 | MacAddress | NA | |
column · MacAddress · not-accessible · current Specifies the MAC address of the client. | ||||
| ChpicfUsrAuthClientReauthenticate | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.22.1.3 | TruthValue | RW | |
column · TruthValue · read-write · current The reauthentication control for this client on this authentication interface. Setting this attribute TRUE forces this authenticated client to reauthenticate. That is, the client is deauthenticated and must transmit traffic in order to trigger reauthentication. Setting this attribute FALSE has no effect. | ||||
| ShpicfUsrAuthMacAuthPassword | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.23 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current This object represents the secret password value used by all MAC auth clients. The default value of password is NULL. The password if set(non NULL) will be used instead of MAC address while constructing Radius request packet. The current maximum length of password is 16. | ||||
| ShpicfUsrAuthWebAuthAccessDeniedMode | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.24 | INTEGER | RW | |
scalar · INTEGER · read-write · current Specifies the access denied mode that applies to the custom message embedded into the login failure page. The values: disabled (1) - the feature is disabled. custom (2) - use the string configured by administrator via CLI or SNMP. radius (3) - use the string in the 'reply-message' attribute of the received RADIUS response message.
| ||||
| ShpicfUsrAuthWebAuthAccessDeniedMessage | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.25 | OCTET STRING (SIZE (1..1024)) | RW | |
scalar · OCTET STRING (SIZE (1..1024)) · read-write · current Text of the access denied message that will be embedded into the custom web auth login failure page. This message will only be used when the access denied mode is set to 'custom'. It can take up to 250 characters | ||||
| ShpicfUsrAuthMacAuthUsrNumberCnt | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.26 | Counter32 | RO | |
scalar · Counter32 · read-only · current This object specifies the total number of authenticated clients currently present in the switch. This does not include the clients which are under process of authentication. | ||||
| ShpicfUsrAuthLastLoginNotifyStatus | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.27 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current The status of the failed login attempt. successful(1) is not currently used. failed(2) indicates a regular failure that did not cause user lockout. failedLockOut(3) indicates a failure that caused user lockout. lockedOut(4) indicates that the user was locked out before the attempt was made. tableFull(5) indicates lockout due to a full lockout table, likely an indication of a serious attack.
| ||||
| ShpicfUsrAuthLastLoginNotifyAddrType | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.28 | InetAddressType | AN | |
scalar · InetAddressType · accessible-for-notify · current The type of IP address from which the user's most recent login attempt occurred. Unknown(0) indicates the console. | ||||
| ShpicfUsrAuthLastLoginNotifyAddr | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.29 | InetAddress | AN | |
scalar · InetAddress · accessible-for-notify · current The IP address from which the user's most recent login attempt occurred. | ||||
| ShpicfUsrAuthUseLLDPData | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.30 | TruthValue | RW | |
scalar · TruthValue · read-write · current Enable or disable LLDP data inclusion in client authentication, which, in addition to using the source MAC address of incoming packets, also uses client information in the LLDP payload to authenticate clients. | ||||
| ShpicfUsrAuthMacAuthPasswordEncrypted | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.31 | OCTET STRING (SIZE (0..256)) | RW | |
scalar · OCTET STRING (SIZE (0..256)) · read-write · current This object represents the encrypted format of password value stored in the object hpicfUsrAuthMacAuthPassword. This object may only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than none(0). This object should only be written with an encrypted key. | ||||
| ShpicfUsrAuthStationIdFormat | 1.3.6.1.4.1.11.2.14.11.5.1.19.1.32 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object represents the format of Calling-Station-Id
and Called-Station-Id in the RADIUS Access-Request.
'multiDashLowercase' - Sends MAC address in aa-bb-cc-dd-ee-ff format
'multiDashUppercase' - Sends MAC address in AA-BB-CC-DD-EE-FF format.
| ||||
| NhpicfUsrAuthPorts | 1.3.6.1.4.1.11.2.14.11.5.1.19.2 | |||
| ThpicfUsrAuthPortTable | 1.3.6.1.4.1.11.2.14.11.5.1.19.2.1 | NA | ||
table · not-accessible · current A table of system level information about Web- MAC-based authentication for each port in the switch. | ||||
| RhpicfUsrAuthPortEntry | 1.3.6.1.4.1.11.2.14.11.5.1.19.2.1.1 | NA | ||
row · not-accessible · current The port number, operational mode and reauthentication control for each switch port. | ||||
| ChpicfUsrAuthPortNumber | 1.3.6.1.4.1.11.2.14.11.5.1.19.2.1.1.1 | InterfaceIndex | AN | |
column · InterfaceIndex · accessible-for-notify · current The port number associated with this switch port. | ||||
| ChpicfUsrAuthWebAuthAdminStatus | 1.3.6.1.4.1.11.2.14.11.5.1.19.2.1.1.2 | TruthValue | RW | |
column · TruthValue · read-write · current Setting this attribute TRUE enables web-based authentication services. A value of FALSE disabled web-based authentication. This attribute cannot be set TRUE concurrently with hpicfUsrAuthMacAuthAdminStatus. | ||||
| ChpicfUsrAuthMacAuthAdminStatus | 1.3.6.1.4.1.11.2.14.11.5.1.19.2.1.1.3 | TruthValue | RW | |
column · TruthValue · read-write · current Setting this attribute TRUE enables MAC-based authentication services. A value of FALSE disabled MAC-based authentication. This attribute cannot be set TRUE concurrently with hpicfUsrAuthWebAuthAdminStatus. | ||||
| ChpicfUsrAuthPortReauthenticate | 1.3.6.1.4.1.11.2.14.11.5.1.19.2.1.1.4 | TruthValue | RW | |
column · TruthValue · read-write · current The reauthentication control for this port. Setting this attribute TRUE forces all authenticated clients to reauthenticate themselves. Setting this attribute FALSE has no effect. This attribute always returns FALSE when read. | ||||
| ChpicfUsrAuthLMAAdminStatus | 1.3.6.1.4.1.11.2.14.11.5.1.19.2.1.1.5 | TruthValue | RW | |
column · TruthValue · read-write · current Setting this attribute TRUE enables Local MAC-based authentication services. A value of FALSE disabled MAC-based authentication. This attribute cannot be set TRUE concurrently with hpicfUsrAuthWebAuthAdminStatus. | ||||
| ChpicfUsrAuthLLDPBypassAdminStatus | 1.3.6.1.4.1.11.2.14.11.5.1.19.2.1.1.6 | TruthValue | RW | |
column · TruthValue · read-write · current Setting this attribute as TRUE enables lldp-bypass authentication. A value of FALSE disables lldp-bypass authentication. This attribute cannot be set to TRUE concurrently with MAC lockdown, MACsec, Trunk, Distributed Trunking and mesh port features. The lldp-bypass feature is limited only for Aruba-APs that send special LLDP TLVs. | ||||
| RhpicfUsrAuthOrderPortEntry | 1.3.6.1.4.1.11.2.14.11.5.1.19.2.1.2 | NA | ||
row · not-accessible · current The port number, authentication order control for each switch port. | ||||
| ChpicfUsrAuthOrderFirst | 1.3.6.1.4.1.11.2.14.11.5.1.19.2.1.2.1 | INTEGER | RW | |
column · INTEGER · read-write · current This object specifies the first Authentication method to be used for the port.
| ||||
| ChpicfUsrAuthOrderSecond | 1.3.6.1.4.1.11.2.14.11.5.1.19.2.1.2.2 | INTEGER | RW | |
column · INTEGER · read-write · current This object specifies the second Authentication method to be used for the port.
| ||||
| ChpicfUsrAuthOrderLmaFallback | 1.3.6.1.4.1.11.2.14.11.5.1.19.2.1.2.3 | TruthValue | RW | |
column · TruthValue · read-write · current This object specifies if Authentication order fallback is enabled for the port. | ||||
| ChpicfUsrAuthPriorityFirst | 1.3.6.1.4.1.11.2.14.11.5.1.19.2.1.2.4 | INTEGER | RW | |
column · INTEGER · read-write · current This object specifies the first priority of Authentication method for the port.
| ||||
| ChpicfUsrAuthPrioritySecond | 1.3.6.1.4.1.11.2.14.11.5.1.19.2.1.2.5 | INTEGER | RW | |
column · INTEGER · read-write · current This object specifies the second priority of Authentication method for the port.
| ||||
| ThpicfUsrAuthBypassPortTable | 1.3.6.1.4.1.11.2.14.11.5.1.19.2.2 | NA | ||
table · not-accessible · current A table of system level information about CDP and LLDP bypass authentication for each port in the switch. | ||||
| RhpicfUsrAuthBypassPortEntry | 1.3.6.1.4.1.11.2.14.11.5.1.19.2.2.1 | NA | ||
row · not-accessible · current The entry for system level information about CDP and LLDP bypass authentication for each port in the switch. | ||||
| ChpicfUsrAuthBypassAdminStatus | 1.3.6.1.4.1.11.2.14.11.5.1.19.2.2.1.1 | TruthValue | RW | |
column · TruthValue · read-write · current Setting this attribute as TRUE enables bypass authentication. A value of FALSE disables bypass authentication. This attribute is set only with hpicfUsrAuthDeviceIdentityName. | ||||
| ChpicfUsrAuthDeviceIdentityName | 1.3.6.1.4.1.11.2.14.11.5.1.19.2.2.1.2 | OCTET STRING (SIZE (1..20)) | RW | |
column · OCTET STRING (SIZE (1..20)) · read-write · current This object represents the device identity name to enable bypass authentication. | ||||
| NhpicfUsrAuthWebAuthConfig | 1.3.6.1.4.1.11.2.14.11.5.1.19.3 | |||
| ThpicfUsrAuthWebAuthConfigTable | 1.3.6.1.4.1.11.2.14.11.5.1.19.3.1 | NA | ||
table · not-accessible · current A table that contains the configuration objects for Web-based Authentication associated with each port. An entry appears in this table for each port that may authenticate access to itself. | ||||
| RhpicfUsrAuthWebAuthConfigEntry | 1.3.6.1.4.1.11.2.14.11.5.1.19.3.1.1 | NA | ||
row · not-accessible · current The configuration information for Web-based authentication. | ||||
| ChpicfUsrAuthWebAuthClientLimit | 1.3.6.1.4.1.11.2.14.11.5.1.19.3.1.1.1 | Integer32 (1..256) | RW | |
column · Integer32 (1..256) · read-write · current The maximum number of authenticated clients to allow on the port. | ||||
| ChpicfUsrAuthWebAuthClientMoves | 1.3.6.1.4.1.11.2.14.11.5.1.19.3.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Specifies whether client may roam across ports under web authentication control. Setting this attribute 'enabled'allows authenticated clients to roam to other ports under web authentication control (that also have this attribute set to 'enabled') without requiring a reauthentication. Setting this attribute 'disabled' disallows authenticated clients from roaming to other ports (regardless of that port's attribute value). The client has to reauthenticate, if it attempts to roam.
| ||||
| ChpicfUsrAuthWebAuthSSLState | 1.3.6.1.4.1.11.2.14.11.5.1.19.3.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Specifies whether web-based authentication should use an SSL connection (i.e. https://) to switch to collect client credentials. Note: A valid certificate must be configured on switch before SSL connections are enabled.
| ||||
| ChpicfUsrAuthWebAuthRedirectUrl | 1.3.6.1.4.1.11.2.14.11.5.1.19.3.1.1.4 | OCTET STRING (SIZE (0..127)) | RW | |
column · OCTET STRING (SIZE (0..127)) · read-write · current Specifies the URL, to which an authenticated client should be redirected, after successful authentication. | ||||
| ChpicfUsrAuthWebAuthQuietPeriod | 1.3.6.1.4.1.11.2.14.11.5.1.19.3.1.1.5 | Integer32 (1..65535) | RW | |
column · Integer32 (1..65535) · read-write · current Specifies the time, in seconds, that the switch should refrain from reattempting an authentication request for a client whose credentials were rejected. | ||||
| ChpicfUsrAuthWebAuthServerTimeout | 1.3.6.1.4.1.11.2.14.11.5.1.19.3.1.1.6 | Integer32 (1..300) | RW | |
column · Integer32 (1..300) · read-write · current Specifies the time, in seconds, that the switch should wait for an authentication reply to return before considering it as timed out. | ||||
| ChpicfUsrAuthWebAuthServerMaxReq | 1.3.6.1.4.1.11.2.14.11.5.1.19.3.1.1.7 | Integer32 (1..10) | RW | |
column · Integer32 (1..10) · read-write · current Specifies the number of authentication requests that must time out before failing authentication. | ||||
| ChpicfUsrAuthWebAuthMaxRetries | 1.3.6.1.4.1.11.2.14.11.5.1.19.3.1.1.8 | Integer32 (1..10) | RW | |
column · Integer32 (1..10) · read-write · current Specifies the number of authentication requests that must fail (i.e. invalid credentials) before failing authentication. | ||||
| ChpicfUsrAuthWebAuthLogoffPeriod | 1.3.6.1.4.1.11.2.14.11.5.1.19.3.1.1.9 | Integer32 (1..999999999) | RW | |
column · Integer32 (1..999999999) · read-write · current Specifies the period, in seconds, at which an authenticated client will be considered unauthenticated for a lack of activity (i.e. traffic originating from client). | ||||
| ChpicfUsrAuthWebAuthReAuthPeriod | 1.3.6.1.4.1.11.2.14.11.5.1.19.3.1.1.10 | Integer32 (0..999999999) | RW | |
column · Integer32 (0..999999999) · read-write · current Specifies the period, in seconds, at which an authenticated client must reauthenticate. A value of 0 signifies that an authenticated client will never have to reauthenticate. When hpSwitchAutzUserRoleEnabled is true, this value will be superseded by the value of hpSwitchAutzUserRoleReauthPeriod from the client's assigned role. | ||||
| ChpicfUsrAuthWebAuthAuthVid | 1.3.6.1.4.1.11.2.14.11.5.1.19.3.1.1.11 | VlanIndex | RW | |
column · VlanIndex · read-write · current Specifies the port VID (PVID) that should be used for an authenticated client. When hpSwitchAutzUserRoleEnabled is true, this value may be superseded by the value of hpSwitchAutzUserRoleVlanId or hpSwitchAutzUserRoleVlanName from the client's assigned role. | ||||
| ChpicfUsrAuthWebAuthUnauthVid | 1.3.6.1.4.1.11.2.14.11.5.1.19.3.1.1.12 | VlanIndex | RW | |
column · VlanIndex · read-write · current Specifies the port VID (PVID) that should be used for an unauthenticated client. When hpSwitchAutzUserRoleEnabled is true, this value may be superseded by the value of hpSwitchAutzUserRoleVlanId or hpSwitchAutzUserRoleVlanName from the role identified by hpSwitchAutzUserRoleInitialRoleName. | ||||
| ChpicfUsrAuthWebAuthCacheCredentials | 1.3.6.1.4.1.11.2.14.11.5.1.19.3.1.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current Specifies whether to cache client credentials or not. Setting this variable 'enabled' allows to cache authenticated clients credentials. Setting this variable 'disabled' disallows to cache authenticated clients credentials.
| ||||
| ChpicfUsrAuthWebAuthCachedReauthPeriod | 1.3.6.1.4.1.11.2.14.11.5.1.19.3.1.1.14 | Unsigned32 (0..2147483647) | RW | |
column · Unsigned32 (0..2147483647) · read-write · current The value indicates the period in seconds, during which cached reauthentication is allowed on the port. If value is zero then the period of cached reauthentication is unlimited.
| ||||
| ThpicfUsrAuthWebAuthClientReauthenticateTable | 1.3.6.1.4.1.11.2.14.11.5.1.19.3.2 | NA | ||
table · not-accessible · current A table containing WebAuth configuration/control variables indexed by port and client MAC. | ||||
| RhpicfUsrAuthWebAuthClientReauthenticateEntry | 1.3.6.1.4.1.11.2.14.11.5.1.19.3.2.1 | NA | ||
row · not-accessible · current The table entry provides the means by which a WebAuth client on an authentication interface can be forced to reauthenticate. | ||||
| ChpicfUsrAuthWebAuthClientReauthenticateInterfaceIndex | 1.3.6.1.4.1.11.2.14.11.5.1.19.3.2.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Index of WebAuth client interfaces. | ||||
| ChpicfUsrAuthWebAuthClientReauthenticateMacAddress | 1.3.6.1.4.1.11.2.14.11.5.1.19.3.2.1.2 | MacAddress | NA | |
column · MacAddress · not-accessible · current Specifies the MAC address of the client. | ||||
| ChpicfUsrAuthWebAuthClientReauthenticate | 1.3.6.1.4.1.11.2.14.11.5.1.19.3.2.1.3 | TruthValue | RW | |
column · TruthValue · read-write · current The reauthentication control for this client on this authentication interface. Setting this attribute TRUE forces this authenticated WebAuth client to reauthenticate. That is, the client is deauthenticated and must transmit traffic in order to trigger reauthentication. Setting this attribute FALSE has no effect. | ||||
| NhpicfUsrAuthMacAuthConfig | 1.3.6.1.4.1.11.2.14.11.5.1.19.4 | |||
| ThpicfUsrAuthMacAuthConfigTable | 1.3.6.1.4.1.11.2.14.11.5.1.19.4.1 | NA | ||
table · not-accessible · current A table that contains the configuration objects for Mac-based Authentication associated with each port. An entry appears in this table for each port that may authenticate access to itself. | ||||
| RhpicfUsrAuthMacAuthConfigEntry | 1.3.6.1.4.1.11.2.14.11.5.1.19.4.1.1 | NA | ||
row · not-accessible · current The configuration information for Mac-based authentication. | ||||
| ChpicfUsrAuthMacAuthClientLimit | 1.3.6.1.4.1.11.2.14.11.5.1.19.4.1.1.1 | Integer32 (1..256) | RW | |
column · Integer32 (1..256) · read-write · current The maximum number of authenticated clients to allow on the port. | ||||
| ChpicfUsrAuthMacAuthClientMoves | 1.3.6.1.4.1.11.2.14.11.5.1.19.4.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Specifies whether client may roam across ports under web authentication control. Setting this attribute 'enabled'allows authenticated clients to roam to other ports under web authentication control (that also have this attribute set to 'enabled') without requiring a reauthentication. Setting this attribute 'disabled' disallows authenticated clients from roaming to other ports (regardless of that port's attribute value). The client has to reauthenticate, if it attempts to roam.
| ||||
| ChpicfUsrAuthMacAuthQuietPeriod | 1.3.6.1.4.1.11.2.14.11.5.1.19.4.1.1.3 | Integer32 (1..65535) | RW | |
column · Integer32 (1..65535) · read-write · current Specifies the time, in seconds, that the switch should refrain from reattempting an authentication request for a client whose credentials were rejected. | ||||
| ChpicfUsrAuthMacAuthServerTimeout | 1.3.6.1.4.1.11.2.14.11.5.1.19.4.1.1.4 | Integer32 (1..300) | RW | |
column · Integer32 (1..300) · read-write · current Specifies the time, in seconds, that the switch should wait for an authentication reply to return before considering it as timed out. | ||||
| ChpicfUsrAuthMacAuthServerMaxReq | 1.3.6.1.4.1.11.2.14.11.5.1.19.4.1.1.5 | Integer32 (1..10) | RW | |
column · Integer32 (1..10) · read-write · current Specifies the number of authentication requests that must time out before failing authentication. | ||||
| ChpicfUsrAuthMacAuthLogoffPeriod | 1.3.6.1.4.1.11.2.14.11.5.1.19.4.1.1.6 | Integer32 (1..999999999) | RW | |
column · Integer32 (1..999999999) · read-write · current Specifies the period, in seconds, at which an authenticated client will be considered unauthenticated for a lack of activity (i.e. traffic originating from client). | ||||
| ChpicfUsrAuthMacAuthReAuthPeriod | 1.3.6.1.4.1.11.2.14.11.5.1.19.4.1.1.7 | Integer32 (0..999999999) | RW | |
column · Integer32 (0..999999999) · read-write · current Specifies the period, in seconds, at which an authenticated client must reauthenticate. A value of 0 signifies that an authenticated client will never have to reauthenticate. When hpSwitchAutzUserRoleEnabled is true, this value will be superseded by the value of hpSwitchAutzUserRoleReauthPeriod from the client's assigned role. | ||||
| ChpicfUsrAuthMacAuthAuthVid | 1.3.6.1.4.1.11.2.14.11.5.1.19.4.1.1.8 | VlanIndex | RW | |
column · VlanIndex · read-write · current Specifies the port VID (PVID) that should be used for an authenticated client. When hpSwitchAutzUserRoleEnabled is true, this value may be superseded by the value of hpSwitchAutzUserRoleVlanId or hpSwitchAutzUserRoleVlanName from the client's assigned role. | ||||
| ChpicfUsrAuthMacAuthUnauthVid | 1.3.6.1.4.1.11.2.14.11.5.1.19.4.1.1.9 | VlanIndex | RW | |
column · VlanIndex · read-write · current Specifies the port VID (PVID) that should be used for an unauthenticated client. When hpSwitchAutzUserRoleEnabled is true, this value may be superseded by the value of hpSwitchAutzUserRoleVlanId or hpSwitchAutzUserRoleVlanName from the role identified by hpSwitchAutzUserRoleInitialRoleName. | ||||
| ChpicfUsrAuthMacAuthCachedReauthPeriod | 1.3.6.1.4.1.11.2.14.11.5.1.19.4.1.1.10 | Unsigned32 (0..2147483647) | RW | |
column · Unsigned32 (0..2147483647) · read-write · current The value indicates the period in seconds, during which cached reauthentication is allowed on the port. If value is zero then the period of cached reauthentication is unlimited.
| ||||
| ChpicfUsrAuthMacAuthUnAuthPeriod | 1.3.6.1.4.1.11.2.14.11.5.1.19.4.1.1.11 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current Specifies the period, in seconds, at which an authenticated client must reauthenticate. A value of 0 signifies that an authenticated client will never have to reauthenticate.
| ||||
| ChpicfUsrAuthMacAuthMode | 1.3.6.1.4.1.11.2.14.11.5.1.19.4.1.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current This object provides information about the authentication mode of a specific port performing MAC authentication. In 'userBased' mode, the port performing MAC authentication will authenticate every client coming in the port; the port will change into 'portBased' mode when a client is authenticated on the port and is authorized to open its connecting switch port to all other clients (i.e., its client account on the RADIUS server is configured with VSA 'HP-Port-Auth-Mode-MA'). A port in portBased MAC authentication mode will grant access for any client coming in the port.
| ||||
| ChpicfUsrAuthMacPin | 1.3.6.1.4.1.11.2.14.11.5.1.19.4.1.1.13 | TruthValue | RW | |
column · TruthValue · read-write · current Enables MAC-Pinning on this port. Setting this attribute TRUE pins the authenticated MAC addresses to the Mac address table. Authenticated clients will not be de-authenticated even when clients are inactive throughout the logoff period. | ||||
| ChpicfMacAuthRetainUnauthClients | 1.3.6.1.4.1.11.2.14.11.5.1.19.4.1.1.14 | TruthValue | RW | |
column · TruthValue · read-write · current Setting this attribute TRUE(1) allows access to Mac-based unauthorized clients by placing the port in unauthorized VLAN during reauthentication. | ||||
| ChpicfMacAuthRadiusServer | 1.3.6.1.4.1.11.2.14.11.5.1.19.4.1.1.15 | OCTET STRING (SIZE (0..255)) | RW | |
column · OCTET STRING (SIZE (0..255)) · read-write · current This holds the configuration of per port RADIUS server group for MAC based authentication. | ||||
| ChpicfUsrAuthMacAuthUnauthVidLLDPNwkPolicy | 1.3.6.1.4.1.11.2.14.11.5.1.19.4.1.1.16 | TruthValue | RW | |
column · TruthValue · read-write · current Setting this attribute TRUE(1) will suppress the transmission of LLDP Network Policy TLV from port when an unauthorized client is placed in unauth VLAN during MAC authentication. | ||||
| ThpicfUsrAuthMacAuthClientReauthenticateTable | 1.3.6.1.4.1.11.2.14.11.5.1.19.4.2 | NA | ||
table · not-accessible · current A table containing macAuth configuration/control variables indexed by port and client MAC. | ||||
| RhpicfUsrAuthMacAuthClientReauthenticateEntry | 1.3.6.1.4.1.11.2.14.11.5.1.19.4.2.1 | NA | ||
row · not-accessible · current The table entry provides the means by which a macAuth client on an authentication interface can be forced to reauthenticate. | ||||
| ChpicfUsrAuthMacAuthClientReauthenticateInterfaceIndex | 1.3.6.1.4.1.11.2.14.11.5.1.19.4.2.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Index of macAuth client interfaces. | ||||
| ChpicfUsrAuthMacAuthClientReauthenticateMacAddress | 1.3.6.1.4.1.11.2.14.11.5.1.19.4.2.1.2 | MacAddress | NA | |
column · MacAddress · not-accessible · current Specifies the MAC address of the client. | ||||
| ChpicfUsrAuthMacAuthClientReauthenticate | 1.3.6.1.4.1.11.2.14.11.5.1.19.4.2.1.3 | TruthValue | RW | |
column · TruthValue · read-write · current The reauthentication control for this client on this authentication interface. Setting this attribute TRUE forces this authenticated macAuth client to reauthenticate. That is, the client is deauthenticated and must transmit traffic in order to trigger reauthentication. Setting this attribute FALSE has no effect. | ||||
| NhpicfUsrAuthWebAuthStats | 1.3.6.1.4.1.11.2.14.11.5.1.19.5 | |||
| ThpicfUsrAuthWebAuthSessionStatsTable | 1.3.6.1.4.1.11.2.14.11.5.1.19.5.1 | NA | ||
table · not-accessible · current A table that contains session statistic objects for each client (i.e. user) attempting to authenticate to a port with Web-authentication enabled. An entry appears in this table for each port in the switch. | ||||
| RhpicfUsrAuthWebAuthSessionStatsEntry | 1.3.6.1.4.1.11.2.14.11.5.1.19.5.1.1 | NA | ||
row · not-accessible · current The session statistics information for a port with Web-based authentication enabled. This shows the current values being collected for active sessions. | ||||
| ChpicfUsrAuthWebAuthSessionMacAddr | 1.3.6.1.4.1.11.2.14.11.5.1.19.5.1.1.1 | MacAddress | RO | |
column · MacAddress · read-only · current Specifies the MAC address of the client. | ||||
| ChpicfUsrAuthWebAuthSessionName | 1.3.6.1.4.1.11.2.14.11.5.1.19.5.1.1.2 | SnmpAdminString | RO | |
column · SnmpAdminString · read-only · current Specifies the username of the client. | ||||
| ChpicfUsrAuthWebAuthSessionState | 1.3.6.1.4.1.11.2.14.11.5.1.19.5.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Specifies the state of the client as follows:
'authenticated' - authenticated client
'unauthenticated' - unauthenticated client,
waiting for credentials
'authenticating' - credentials have been sent
for verification, waiting for
response
'authReqRejectNoVlan' - credentials invalid; client
does not have access to
unauthenticated VLAN
'authReqRejectUnauthVlan' - credentials invalid; client
does have access to
unauthenticated VLAN
'authReqTimeoutNoVlan' - credentials could not be
verified; client is still
unauthenticated and does
not have access to
unauthenticated VLAN
'authReqTimeoutUnauthVlan' - credentials could not be
verified; client is still
unauthenticated, but has
access to unauthenticated
VLAN
'initialRole' - client is assigned the initial role
'initialRoleFailed' - initial role could not be applied; client
does not have access to the network
'criticalAuth - client is authenticated on critical VLAN
'openAUth - client is authenticated on open auth VLAN
| ||||
| ChpicfUsrAuthWebAuthSessionStateTime | 1.3.6.1.4.1.11.2.14.11.5.1.19.5.1.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The duration, in seconds, a client has spent in the state specified by hpicfUsrAuthSessionState. | ||||
| ChpicfUsrAuthWebAuthSessionAuthVid | 1.3.6.1.4.1.11.2.14.11.5.1.19.5.1.1.5 | VlanIndex | RO | |
column · VlanIndex · read-only · current Specifies the PVID that the authenticated client is utilizing. If client is unauthenticated, this object has no meaning. | ||||
| ChpicfUsrAuthWebAuthSessionUnauthVid | 1.3.6.1.4.1.11.2.14.11.5.1.19.5.1.1.6 | VlanIndex | RO | |
column · VlanIndex · read-only · current Specifies the PVID that the unauthenticated client is utilizing. If client is authenticated, this object has no meaning. | ||||
| ChpicfUsrAuthWebAuthSessionTimeout | 1.3.6.1.4.1.11.2.14.11.5.1.19.5.1.1.7 | Unsigned32 (0..4294967295) | RO | |
column · Unsigned32 (0..4294967295) · read-only · current Specifies the RADIUS Server set session timeout for reauthentication of the user. When ST = 0, user gets reauthenticated at reauth-period secs, ST < 60 it is set to 60 secs and then user is reauthenticated, ST > 60 user is reauthenticated at ST secs.
| ||||
| ChpicfUsrAuthWebAuthSessionRole | 1.3.6.1.4.1.11.2.14.11.5.1.19.5.1.1.8 | HpAutzUserRoleName | RO | |
column · HpAutzUserRoleName · read-only · current When hpSwitchAutzUserRoleEnabled is true, specifies the user role of the client. | ||||
| NhpicfUsrAuthMacAuthStats | 1.3.6.1.4.1.11.2.14.11.5.1.19.6 | |||
| ThpicfUsrAuthMacAuthSessionStatsTable | 1.3.6.1.4.1.11.2.14.11.5.1.19.6.1 | NA | ||
table · not-accessible · current A table that contains session statistic objects for each client (i.e. user) attempting to authenticate to a port with MAC-authentication enabled. An entry appears in this table for each port in the switch. | ||||
| RhpicfUsrAuthMacAuthSessionStatsEntry | 1.3.6.1.4.1.11.2.14.11.5.1.19.6.1.1 | NA | ||
row · not-accessible · current The session statistics information for a port with Mac-based authentication enabled. This shows the current values being collected for active sessions. | ||||
| ChpicfUsrAuthMacAuthSessionMacAddr | 1.3.6.1.4.1.11.2.14.11.5.1.19.6.1.1.1 | MacAddress | RO | |
column · MacAddress · read-only · current Specifies the MAC address of the client. | ||||
| ChpicfUsrAuthMacAuthSessionState | 1.3.6.1.4.1.11.2.14.11.5.1.19.6.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Specifies the state of the client as follows:
'authenticated' - authenticated client
'unauthenticated' - unauthenticated client,
waiting for credentials
'authenticating' - credentials have been sent
for verification, waiting for
response
'authReqRejectNoVlan' - credentials invalid; client
does not have access to
unauthenticated VLAN
'authReqRejectUnauthVlan - credentials invalid; client
does have access to
unauthenticated VLAN
'authReqTimeoutNoVlan' - credentials could not be
verified; client is still
unauthenticated and does
not have access to
unauthenticated VLAN
'authReqTimeoutUnauthVlan' - credentials could not be
verified; client is still
unauthenticated, but has
access to unauthenticated
VLAN
'initialRole' - client is assigned the initial role
'initialRoleFailed' - initial role could not be applied; client
does not have access to the network
'criticalAuth - client is authenticated on critical VLAN
'openAUth - client is authenticated on open auth VLAN
| ||||
| ChpicfUsrAuthMacAuthSessionStateTime | 1.3.6.1.4.1.11.2.14.11.5.1.19.6.1.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The duration, in seconds, a client has spent in the state specified by hpicfUsrAuthSessionState. | ||||
| ChpicfUsrAuthMacAuthSessionAuthVid | 1.3.6.1.4.1.11.2.14.11.5.1.19.6.1.1.4 | VlanIndex | RO | |
column · VlanIndex · read-only · current Specifies the PVID that the authenticated client is utilizing. If client is unauthenticated, this object has no meaning. | ||||
| ChpicfUsrAuthMacAuthSessionUnauthVid | 1.3.6.1.4.1.11.2.14.11.5.1.19.6.1.1.5 | VlanIndex | RO | |
column · VlanIndex · read-only · current Specifies the PVID that the unauthenticated client is utilizing. If client is authenticated, this object has no meaning. | ||||
| ChpicfUsrAuthMacAuthSessionTimeout | 1.3.6.1.4.1.11.2.14.11.5.1.19.6.1.1.6 | Unsigned32 (0..4294967295) | RO | |
column · Unsigned32 (0..4294967295) · read-only · current Specifies the RADIUS Server set session timeout for reauthentication of the user. When ST = 0, user gets reauthenticated at reauth-period secs, ST < 60 it is set to 60 secs and then user is reauthenticated, ST > 60 user is reauthenticated at ST secs.
| ||||
| ChpicfUsrAuthMacAuthSessionUsrNumberCnt | 1.3.6.1.4.1.11.2.14.11.5.1.19.6.1.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current This object Specifies the number of authenticated client currently present on this port. This does not include the clients which are under process of authentication. | ||||
| ChpicfUsrAuthMacAuthSessionName | 1.3.6.1.4.1.11.2.14.11.5.1.19.6.1.1.8 | SnmpAdminString | RO | |
column · SnmpAdminString · read-only · current Specifies the username of the client. | ||||
| ChpicfUsrAuthMacAuthSessionRole | 1.3.6.1.4.1.11.2.14.11.5.1.19.6.1.1.9 | HpAutzUserRoleName | RO | |
column · HpAutzUserRoleName · read-only · current When hpSwitchAutzUserRoleEnabled is true, specifies the user role of the client. | ||||
| NhpicfUsrAuthConformance | 1.3.6.1.4.1.11.2.14.11.5.1.19.7 | |||
| NhpicfUsrAuthGroups | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.2 | |||
| GhpicfUsrAuthSystemGroup | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.1 | deprecated | ||
group · deprecated A collection of objects providing system information about, and control over, Web- and MAC-based authentication. | ||||
| GhpicfUsrAuthPortsGroup | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.2 | deprecated | ||
group · deprecated A collection of objects providing system level information about Web and MAC based authentication for each port in the switch. | ||||
| GhpicfUsrAuthWebAuthConfigGroup | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.3 | |||
group · current A collection of objects providing configuration objects for Web-based authentication associated with each port.
| ||||
| GhpicfUsrAuthMacAuthConfigGroup | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.4 | |||
group · current A collection of objects providing configuration objects for MAC-based authentication associated with each port. | ||||
| GhpicfUsrAuthWebAuthSessionStatsGroup | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.5 | deprecated | ||
group · deprecated A collection of objects providing statistics about current sessions for Web-based authentication. | ||||
| GhpicfUsrAuthMacAuthSessionStatsGroup | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.6 | deprecated | ||
group · deprecated A collection of objects providing statistics about current sessions for MAC-based authentication. | ||||
| GhpicfUsrAuthWebAuthConfigGroup1 | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.7 | |||
group · current A collection of objects providing configuration objects for Web-based authentication associated with each port.
| ||||
| GhpicfUsrAuthMacAuthConfigGroup1 | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.8 | |||
group · current A collection of objects providing configuration objects for MAC-based authentication associated with each port.
| ||||
| GhpicfUsrAuthMacAuthConfigGroup2 | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.9 | deprecated | ||
group · deprecated A collection of objects providing configuration objects for MAC-based authentication associated with each port.
| ||||
| GhpicfUsrAuthRedirectServerGroup | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.10 | |||
group · current A collection of objects for authentication Redirect Server. | ||||
| GhpicfUsrAuthWMAeWAServerGroup | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.11 | |||
group · current A collection of objects for Enhanced Web Auth servers. | ||||
| GhpicfUsrAuthClientReauthenticateGroup | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.12 | |||
group · current A collection of objects for Reauthentication settings . | ||||
| GhpicfUsrAuthMacAuthSessionStatsGroup1 | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.13 | |||
group · current A collection of objects providing RADIUS server set session timeout for MAC-based user reauthentication. | ||||
| GhpicfUsrAuthWebAuthSessionStatsGroup1 | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.14 | |||
group · current A collection of objects providing RADIUS server set session timeout for Web-based user reauthentication. | ||||
| GhpicfUsrAuthLastLoginGroup | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.15 | |||
group · current A collection of objects for viewing the most recent logins to the switch by users, and for deleting the table.
| ||||
| GhpicfUsrAuthPortsGroup1 | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.16 | deprecated | ||
group · deprecated A collection of objects providing system level information about Web and MAC based authentication for each port in the switch. | ||||
| GhpicfUsrAuthCaptivePortalGroup | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.17 | |||
group · current A collection of objects providing configuration for the captive portal feature. | ||||
| GhpicfUsrAuthCaptivePortalProfileGroup | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.18 | |||
group · current A collection of objects providing configuration for captive portal profiles. | ||||
| GhpicfUsrAuthWebAuthSessionStatsGroup2 | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.19 | |||
group · current A collection of objects providing statistics about current sessions for Web-based authentication. | ||||
| GhpicfUsrAuthMacAuthSessionStatsGroup2 | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.20 | |||
group · current A collection of objects providing statistics about current sessions for MAC-based authentication. | ||||
| GhpicfUsrAuthPortsGroup2 | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.21 | deprecated | ||
group · deprecated A collection of objects providing system level information about Web and MAC based authentication for each port in the switch. | ||||
| GhpicfUsrAuthMacAuthConfigGroup3 | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.22 | deprecated | ||
group · deprecated A collection of objects providing configuration objects for MAC-based authentication associated with each port.
| ||||
| GhpicfUsrAuthPortsGroup3 | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.23 | |||
group · current A collection of objects providing system level information about Web and MAC based authentication for each port in the switch. | ||||
| GhpicfUsrAuthMacAuthConfigGroup4 | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.24 | deprecated | ||
group · deprecated A collection of objects providing configuration objects for MAC-based authentication associated with each port.
| ||||
| GhpicfUsrAuthBypassPortsGroup | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.25 | |||
group · current A collection of objects providing system level information about LLDP and CDP bypass authentication for each port in the switch. | ||||
| GhpicfUsrAuthOrderPortsGroup | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.26 | |||
group · current A collection of objects providing configuration support for Authentication order and Priority on Port. | ||||
| GhpicfUsrAuthMacAuthConfigGroup5 | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.27 | |||
group · current A collection of objects providing configuration objects for MAC-based authentication associated with each port.
| ||||
| GhpicfUsrAuthSystemGroup1 | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.28 | |||
group · current A collection of objects providing system information about, and control over, Web- and MAC-based authentication. | ||||
| NhpicfUsrAuthCompliances | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.4 | |||
| MhpicfUsrAuthCompliance | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.1 | deprecated | ||
compliance · deprecated ********* THIS COMPLIANCE IS DEPRECATED ********* The compliance statement for devices support of HP-USER-AUTH MIB. | ||||
| MhpicfUsrAuthCompliance1 | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.2 | deprecated | ||
compliance · deprecated The compliance statement for devices support of HP-USER-AUTH MIB. | ||||
| MhpicfUsrAuthCompliance2 | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.3 | deprecated | ||
compliance · deprecated The compliance statement for devices support of HP-USER-AUTH MIB. | ||||
| MhpicfUsrAuthCompliance3 | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.4 | deprecated | ||
compliance · deprecated The compliance statement for devices support of HP-USER-AUTH MIB. | ||||
| MhpicfUsrAuthCompliance4 | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.5 | deprecated | ||
compliance · deprecated The compliance statement for devices support of HP-USER-AUTH MIB. | ||||
| MhpicfUsrAuthCompliance5 | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.6 | deprecated | ||
compliance · deprecated The compliance statement for devices support of HP-USER-AUTH MIB. | ||||
| MhpicfUsrAuthCompliance6 | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.7 | |||
compliance · current The compliance statement for devices support of HP-USER-AUTH MIB. | ||||
| MhpicfUsrAuthCompliance7 | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.8 | deprecated | ||
compliance · deprecated The compliance statement for device support of HP-USER-AUTH MIB.
| ||||
| MhpicfUsrAuthCompliance8 | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.9 | deprecated | ||
compliance · deprecated The compliance statement for device support of HP-USER-AUTH MIB.
| ||||
| MhpicfUsrAuthCompliance9 | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.10 | deprecated | ||
compliance · deprecated The compliance statement for device support of HP-USER-AUTH MIB.
| ||||
| MhpicfUsrAuthCompliance10 | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.11 | deprecated | ||
compliance · deprecated The compliance statement for device support of HP-USER-AUTH MIB.
| ||||
| MhpicfUsrAuthCompliance11 | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.12 | deprecated | ||
compliance · deprecated The compliance statement for devices support of HP-USER-AUTH MIB. | ||||
| MhpicfUsrAuthCompliance12 | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.13 | deprecated | ||
compliance · deprecated The compliance statement for devices support of HP-USER-AUTH MIB. | ||||
| MhpicfUsrAuthCompliance13 | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.14 | |||
compliance · current The compliance statement for devices support of HP-USER-AUTH MIB. | ||||
| MhpicfUsrAuthCompliance14 | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.15 | deprecated | ||
compliance · deprecated The compliance statement for device support of HP-USER-AUTH MIB.
| ||||
| MhpicfUsrAuthCompliance15 | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.16 | deprecated | ||
compliance · deprecated The compliance statement for devices support of HP-USER-AUTH MIB. | ||||
| MhpicfUsrAuthCompliance16 | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.17 | deprecated | ||
compliance · deprecated The compliance statement for device support of HP-USER-AUTH MIB.
| ||||
| MhpicfUsrAuthCompliance17 | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.18 | deprecated | ||
compliance · deprecated The compliance statement for devices support of HP-USER-AUTH MIB. | ||||
| MhpicfUsrAuthCompliance18 | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.19 | deprecated | ||
compliance · deprecated The compliance statement for device support of HP-USER-AUTH MIB.
| ||||
| MhpicfUsrAuthCompliance19 | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.20 | deprecated | ||
compliance · deprecated The compliance statement for devices support of HP-USER-AUTH MIB. | ||||
| MhpicfUsrAuthCompliance20 | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.21 | deprecated | ||
compliance · deprecated The compliance statement for devices support of HP-USER-AUTH MIB. | ||||
| MhpicfUsrAuthCompliance21 | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.22 | |||
compliance · current The compliance statement for devices support of HP-USER-AUTH MIB.
| ||||
| MhpicfUsrAuthCompliance22 | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.23 | deprecated | ||
compliance · deprecated The compliance statement for device support of HP-USER-AUTH MIB.
| ||||
| MhpicfUsrAuthCompliance23 | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.24 | deprecated | ||
compliance · deprecated The compliance statement for devices support of HP-USER-AUTH MIB. | ||||
| MhpicfUsrAuthCompliance24 | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.25 | |||
compliance · current The compliance statement for device support of HP-USER-AUTH MIB.
| ||||
| MhpicfUsrAuthCompliance25 | 1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.26 | |||
compliance · current The compliance statement for devices support of HP-USER-AUTH MIB. | ||||
| NhpicfUsrAuthNotifyConformance | 1.3.6.1.4.1.11.2.14.11.5.1.19.8 | |||
| GhpicfUsrAuthNotificationGroup | 1.3.6.1.4.1.11.2.14.11.5.1.19.8.1 | |||
group · current A group of authorization notifications. | ||||
| GhpicfNotifcationConfigDataGroup | 1.3.6.1.4.1.11.2.14.11.5.1.19.8.2 | deprecated | ||
group · deprecated A group of notification data and configuration objects. | ||||
| GhpicfNotificationConfigDataGroup1 | 1.3.6.1.4.1.11.2.14.11.5.1.19.8.3 | |||
group · current A group of notification data and configuration objects.
| ||||
| NhpicfUsrAuthMacGlobalConformance | 1.3.6.1.4.1.11.2.14.11.5.1.19.9 | |||
| GhpicfUsrAuthMacGroup | 1.3.6.1.4.1.11.2.14.11.5.1.19.9.1 | deprecated | ||
group · deprecated A group of Mac auth global configuration objects.
| ||||
| GhpicfUsrAuthMacGroup1 | 1.3.6.1.4.1.11.2.14.11.5.1.19.9.2 | |||
group · current A group of Mac auth global configuration objects. | ||||
| NhpicfUsrAuthWebAuthAccessDeniedConformance | 1.3.6.1.4.1.11.2.14.11.5.1.19.10 | |||
| GhpicfUsrAuthWebAuthAccessDeniedGroup | 1.3.6.1.4.1.11.2.14.11.5.1.19.10.1 | |||
group · current A group of web-auth access denied configuration objects. | ||||
| NhpicfUsrAuthMacAuthUsrNumberConformance | 1.3.6.1.4.1.11.2.14.11.5.1.19.11 | |||
| GhpicfUsrAuthMacAuthUsrNumberGroup | 1.3.6.1.4.1.11.2.14.11.5.1.19.11.1 | |||
group · current Number of Mac authenticated client objects in the switch and port. | ||||
| NhpicfUsrAuthLastLogin | 1.3.6.1.4.1.11.2.14.11.5.1.19.12 | |||
| ShpicfUsrAuthLastLoginCurrentGeneration | 1.3.6.1.4.1.11.2.14.11.5.1.19.12.1 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current The current generation number of the rows in hpicfUsrAuthLastLoginTable. To obtain a consistent table view, first read this object, then enumerate the table (reading hpicfUsrAuthLastLoginGeneration last), discarding any rows with hpicfUsrAuthLastLoginGeneration greater than this value. | ||||
| ThpicfUsrAuthLastLoginTable | 1.3.6.1.4.1.11.2.14.11.5.1.19.12.2 | NA | ||
table · not-accessible · current This table records, per-username, the most recent login and login attempts. A record is created by the switch upon the first successful login to a username, and updated upon each subsequent login or login attempt. | ||||
| RhpicfUsrAuthLastLoginEntry | 1.3.6.1.4.1.11.2.14.11.5.1.19.12.2.1 | NA | ||
| ChpicfUsrAuthLastLoginIndex | 1.3.6.1.4.1.11.2.14.11.5.1.19.12.2.1.1 | Unsigned32 (1..64511) | NA | |
column · Unsigned32 (1..64511) · not-accessible · current The index value which uniquely identifies a row in the user last-login table. | ||||
| ChpicfUsrAuthLastLoginName | 1.3.6.1.4.1.11.2.14.11.5.1.19.12.2.1.2 | DisplayString (SIZE (1..64)) | RO | |
column · DisplayString (SIZE (1..64)) · read-only · current The user's login name. | ||||
| ChpicfUsrAuthLastLoginPrivilege | 1.3.6.1.4.1.11.2.14.11.5.1.19.12.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The privilege level assigned to the user at the most recent login.
| ||||
| ChpicfUsrAuthLastLoginSuccTime | 1.3.6.1.4.1.11.2.14.11.5.1.19.12.2.1.4 | DateAndTime | RO | |
column · DateAndTime · read-only · current The time of the user's most recent successful login. | ||||
| ChpicfUsrAuthLastLoginSuccAddrType | 1.3.6.1.4.1.11.2.14.11.5.1.19.12.2.1.5 | InetAddressType | RO | |
column · InetAddressType · read-only · current The type of IP address from which the user's most recent successful login occurred. Unknown(0) indicates a console login. | ||||
| ChpicfUsrAuthLastLoginSuccAddr | 1.3.6.1.4.1.11.2.14.11.5.1.19.12.2.1.6 | InetAddress | RO | |
column · InetAddress · read-only · current The IP address from which the user's most recent successful login occurred. | ||||
| ChpicfUsrAuthLastLoginUnsuccTime | 1.3.6.1.4.1.11.2.14.11.5.1.19.12.2.1.7 | DateAndTime | RO | |
column · DateAndTime · read-only · current The time of the user's most recent unsuccessful login attempt. This will be zero length if there have been no unsuccessful login attempts since the most recent successful login. | ||||
| ChpicfUsrAuthLastLoginUnsuccCount | 1.3.6.1.4.1.11.2.14.11.5.1.19.12.2.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The count of the user's unsuccessful login attempts since the most recent successful login. This counter is reset to zero whenever hpicfUsrAuthLastLoginSuccTime changes. | ||||
| ChpicfUsrAuthLastLoginGeneration | 1.3.6.1.4.1.11.2.14.11.5.1.19.12.2.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The generation number of the objects in this row. This object should be tested after reading other objects in a row to ensure it has not changed from hpicfUsrAuthLastLoginCurrentGeneration, or from the value of hpicfUsrAuthLastLoginGeneration sent in an hpicfUsrAuthCLIAuthFail notification. | ||||
| ShpicfUsrAuthLastLoginDeleteAll | 1.3.6.1.4.1.11.2.14.11.5.1.19.12.3 | TruthValue | RW | |
scalar · TruthValue · read-write · current When set to true(1), all rows of the last-login table are deleted. Always reads as false(2). | ||||
| NhpicfUsrAuthCaptivePortal | 1.3.6.1.4.1.11.2.14.11.5.1.19.13 | |||
| NhpicfUsrAuthCaptivePortalConfig | 1.3.6.1.4.1.11.2.14.11.5.1.19.13.1 | |||
| ShpicfUsrAuthCaptivePortalConfigEnabled | 1.3.6.1.4.1.11.2.14.11.5.1.19.13.1.1 | TruthValue | RW | |
scalar · TruthValue · read-write · current Enable redirection to a captive portal server for additional client authentication. When enabled, clients will be redirected to a captive portal server for further authentication when the RADIUS response includes a redirect URL. | ||||
| ShpicfUsrAuthCaptivePortalUrlHashKey | 1.3.6.1.4.1.11.2.14.11.5.1.19.13.1.2 | OCTET STRING (SIZE (0..64)) | RW | |
scalar · OCTET STRING (SIZE (0..64)) · read-write · current A shared secret used by the captive portal server to validate a redirected request. A read of this object always returns an empty string. | ||||
| ShpicfUsrAuthCaptivePortalUrlHashKeyEncrypted | 1.3.6.1.4.1.11.2.14.11.5.1.19.13.1.3 | OCTET STRING (SIZE (0..128)) | RW | |
scalar · OCTET STRING (SIZE (0..128)) · read-write · current The encrypted form of the shared secret used by the captive portal server to validate a redirected request. This object should only be written with an encrypted password previously read from a compatible HP Networking device. | ||||
| ThpicfUsrAuthCaptivePortalProfileTable | 1.3.6.1.4.1.11.2.14.11.5.1.19.13.2 | NA | ||
table · not-accessible · current This table consists of the captive portal profiles configured on the switch. The size of this table is implementation specific. | ||||
| RhpicfUsrAuthCaptivePortalProfileEntry | 1.3.6.1.4.1.11.2.14.11.5.1.19.13.2.1 | NA | ||
row · not-accessible · current A captive portal profile table entry. | ||||
| ChpicfUsrAuthCaptivePortalProfileName | 1.3.6.1.4.1.11.2.14.11.5.1.19.13.2.1.1 | OCTET STRING (SIZE (0..63)) | NA | |
column · OCTET STRING (SIZE (0..63)) · not-accessible · current The name of this profile. All printable ASCII characters are allowed except '.', ' ', and '~'. | ||||
| ChpicfUsrAuthCaptivePortalProfileRowStatus | 1.3.6.1.4.1.11.2.14.11.5.1.19.13.2.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The Row Status of this entry.
To create a new entry, send an SNMP SET request with a
RowStatus of 'createAndGo'.
active - the entry is ready to use.
notInService - not valid for this table.
notReady - the entry is not fully configured.
createAndGo - create a new entry.
createAndWait - not valid for this table.
delete - delete the entry. Entries of
hpicfUsrAuthCaptivePortalProfileType 'predefined'
cannot be deleted. | ||||
| ChpicfUsrAuthCaptivePortalProfileType | 1.3.6.1.4.1.11.2.14.11.5.1.19.13.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates whether the corresponding profile is predefined or custom. Predefined profiles cannot be modified or deleted.
| ||||
| ChpicfUsrAuthCaptivePortalProfileRedirectUrl | 1.3.6.1.4.1.11.2.14.11.5.1.19.13.2.1.4 | OCTET STRING (SIZE (0..247)) | RC | |
column · OCTET STRING (SIZE (0..247)) · read-create · current The URL of the captive portal the user is redirected to for authentication. An empty value indicates the URL will be sent via the RADIUS VSA: HPE-CAPTIVE-PORTAL-URL(24) | ||||
Traps / Notifications
- hpicfPortSecAuthFailure
1.3.6.1.4.1.11.2.14.11.5.1.19.0.3 - hpicfUsrAuthCLIAuthFail
1.3.6.1.4.1.11.2.14.11.5.1.19.0.1 - hpicfUsrAuthPasswdChng
1.3.6.1.4.1.11.2.14.11.5.1.19.0.2
Groups and compliance
- hpicfNotifcationConfigDataGroup
- hpicfNotificationConfigDataGroup1
- hpicfUsrAuthBypassPortsGroup
- hpicfUsrAuthCaptivePortalGroup
- hpicfUsrAuthCaptivePortalProfileGroup
- hpicfUsrAuthClientReauthenticateGroup
- hpicfUsrAuthCompliance
- hpicfUsrAuthCompliance1
- hpicfUsrAuthCompliance10
- hpicfUsrAuthCompliance11
- hpicfUsrAuthCompliance12
- hpicfUsrAuthCompliance13
- hpicfUsrAuthCompliance14
- hpicfUsrAuthCompliance15
- hpicfUsrAuthCompliance16
- hpicfUsrAuthCompliance17
- hpicfUsrAuthCompliance18
- hpicfUsrAuthCompliance19
- hpicfUsrAuthCompliance2
- hpicfUsrAuthCompliance20
- hpicfUsrAuthCompliance21
- hpicfUsrAuthCompliance22
- hpicfUsrAuthCompliance23
- hpicfUsrAuthCompliance24
- hpicfUsrAuthCompliance25
- hpicfUsrAuthCompliance3
- hpicfUsrAuthCompliance4
- hpicfUsrAuthCompliance5
- hpicfUsrAuthCompliance6
- hpicfUsrAuthCompliance7
- hpicfUsrAuthCompliance8
- hpicfUsrAuthCompliance9
- hpicfUsrAuthLastLoginGroup
- hpicfUsrAuthMacAuthConfigGroup
- hpicfUsrAuthMacAuthConfigGroup1
- hpicfUsrAuthMacAuthConfigGroup2
- hpicfUsrAuthMacAuthConfigGroup3
- hpicfUsrAuthMacAuthConfigGroup4
- hpicfUsrAuthMacAuthConfigGroup5
- hpicfUsrAuthMacAuthSessionStatsGroup
- hpicfUsrAuthMacAuthSessionStatsGroup1
- hpicfUsrAuthMacAuthSessionStatsGroup2
- hpicfUsrAuthMacAuthUsrNumberGroup
- hpicfUsrAuthMacGroup
- hpicfUsrAuthMacGroup1
- hpicfUsrAuthNotificationGroup
- hpicfUsrAuthOrderPortsGroup
- hpicfUsrAuthPortsGroup
- hpicfUsrAuthPortsGroup1
- hpicfUsrAuthPortsGroup2
- hpicfUsrAuthPortsGroup3
- hpicfUsrAuthRedirectServerGroup
- hpicfUsrAuthSystemGroup
- hpicfUsrAuthSystemGroup1
- hpicfUsrAuthWMAeWAServerGroup
- hpicfUsrAuthWebAuthAccessDeniedGroup
- hpicfUsrAuthWebAuthConfigGroup
- hpicfUsrAuthWebAuthConfigGroup1
- hpicfUsrAuthWebAuthSessionStatsGroup
- hpicfUsrAuthWebAuthSessionStatsGroup1
- hpicfUsrAuthWebAuthSessionStatsGroup2