HP-SYSTEM-MIB
Hewlett-PackardThis MIB module describes objects for basic
management of devices in the HP Procurve
product line.snmptranslate -m HP-SYSTEM-MIB -Tpsnmpwalk -v2c -c <community> -m HP-SYSTEM-MIB <host> 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1Imports
| HP-BASE-MIB | hpProcurveCommon |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IhpProcurveSystem | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1 | |||
identity This MIB module describes objects for basic
management of devices in the HP Procurve
product line. | ||||
| NhpSystemTraps | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0 | |||
| !fanDown | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0.1 | |||
notification · current A fanDown trap signifies that hpFanOperational has detected an event where the fan is not operating.
| ||||
| !fanUp | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0.2 | |||
notification · current A fanUp trap signifies that hpFanOperational has detected an event where the fan is now operating.
| ||||
| !temperatureAlarm | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0.3 | |||
notification · current A temperatureAlarm signifies that the SNMP entity, acting in an agent role, has detected that the hpCpuTemperature has a value that exceeds acceptable tolerances (i.e. it is too hot or too cold).
| ||||
| !hpFailover | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0.4 | |||
notification · current A hpFailover signifies that the SNMP
entity, acting in an agent role, has detected that the
standby system in a primary, redundant operation has
become the primary system. This notification will only
be sent by what was formerly the standby system.
| ||||
| !hpDistributionEvent | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0.5 | |||
notification · current A hpDistributionEvent signifies that the SNMP
entity, acting in an agent role, has detected that the
central entity in a distributed system has triggered a
distribution event of hpDistributionType. | ||||
| !hpAdminAuthFailure | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0.6 | |||
notification · current A hpAdminAuthFailure signifies that the SNMP
entity, acting in an agent role, has detected that
someone at the address reported by hpAdminIpAddress
has failed to authenticate to the device via
the administrative interface.
| ||||
| NhpProcurveSysMib | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1 | |||
| ShpProductDescription | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.1 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current Textual Description of the HW product | ||||
| ShpProductHWVersion | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.2 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current HW version of the product | ||||
| ShpProductSWVersion | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.3 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current SW version of the product | ||||
| ShpProductSerialNumber | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.4 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current Serial Number of the product | ||||
| ShpProductLastChange | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.5 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current Date and time of last configuration change | ||||
| ShpCpuTemperature | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.6 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current Current temperature in degrees centigrade of the CPU. | ||||
| ShpPowerSupplyTemperature | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.7 | OCTET STRING | RO | deprecated |
scalar · OCTET STRING · read-only · deprecated Current temperature in degrees centigrade of the power supply. | ||||
| ShpChassisTemperature | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.8 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current Current temperature in degrees centigrade of the mother board. Note: this is not the ambient temperature of the box. | ||||
| ThpFanStatusTable | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.9 | NA | ||
table · not-accessible · current Table of operational status of all internal cooling fans. | ||||
| RhpFanStatusEntry | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.9.1 | NA | ||
| ChpFanNumber | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.9.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current Identifier of cooling fan, numbered to represent what hardware the fan is supposed to be cooling.
| ||||
| ChpFanOperational | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.9.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Operational status of a cooling fan.
| ||||
| ChpFanSpeed | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.9.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current Speed of the fan in RPM. | ||||
| NhpSystemMIBObjects | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2 | |||
| NhpConfig | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1 | |||
| ShpName | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.2 | DisplayString (SIZE (0..255)) | RW | |
scalar · DisplayString (SIZE (0..255)) · read-write · current A textual string containing information about the device. For instance, this string reflects the setting of the HP J8162A XL Access Controller Module Name available on the Administrative Web based User Interface. If no HP J8162A XL Access Controller Module name is entered, this object contains a zero-length string. | ||||
| ShpSystemID | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.3 | OCTET STRING (SIZE (0..64)) | RO | |
scalar · OCTET STRING (SIZE (0..64)) · read-only · current The unique identifier for this device, as used by this system, or a master controlling system. For instance, an HP J8162A XL Access Controller Module would report the systemID used by the Access Control Server 740wl to uniquely identify this device. | ||||
| ShpState | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current state of the device. A HP ProCurve Networking Business
device can be configured for standalone operation,
Failover (ie with a redundant peer), or for Distribution
of configuration from a controlling central system to
remote entities.
unknown(1) - system Configuration status unknown
up(2) - a standalone system is operational.
down(3) - a system is not operational.
primary(4) - system is running as the primary in
a Failover peer configuration.
secondary(5) - system is running as the backup in
a Failover peer configuration.
| ||||
| ShpDistributionType | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current The most recent distribution event type on a device.
This object will change dynamically based on
the most recently triggered distribution event.
unknown(1) - the distribution event type
none(2) - no distribution event has occurred
rightsPush(3) - the central Access Control Server 740wl
has triggered a rights push event to remote Access Control Server
740wls.
| ||||
| ShpDistributionStatus | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.6 | INTEGER | RO | |
scalar · INTEGER · read-only · current The most recent distribution event on a device.
This object will change dynamically based on
the most recently triggered distribution event.
unknown(1) - the distribution event status unknown
succeeded(2) - no distribution event has succeeded
failed(3) - the distribution event failed for some reason.
| ||||
| ShpIpAddress | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.7 | IpAddress | RW | |
scalar · IpAddress · read-write · current The administratively assigned IP address associated with the device. This can be assigned statically on the device Console port, or configured via DHCP. | ||||
| ShpPeerIpAddress | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.8 | IpAddress | RW | |
scalar · IpAddress · read-write · current The administratively assigned IP address associated with a redundant peer device, configured to work with this device for failover purposes. This can be assigned statically on the device Console port, or configured via DHCP. If the device does not support Failover configuration, or none has been configured, this object will report 0.0.0.0 | ||||
| ShpTechSupportEnabled | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.9 | TruthValue | RW | |
scalar · TruthValue · read-write · current This object contains the current setting for the technical
support access to the device. A value of true(1)
indicates the Technical Support Access has been enabled. A value
of false(2) indicates this access has been disabled. Note
this object should only report true(2) if HP ProCurve Networking
Business Technical Support staff have requested this access
to the HP J8162A XL Access Controller Module for troubleshooting purposes. | ||||
| ShpFailedAdminIpAddress | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.10 | IpAddress | RO | |
scalar · IpAddress · read-only · current The IP address associated with the last failed
authentication to the Administrative UI. If no Administrator
had failed authentication, this object will report 0.0.0.0 | ||||
| NhpStatus | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.2 | |||
| ShpNumAccessControllers | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.2.1 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current The number of HP J8162A XL Access Controller Modules known to this system. If this system is an HP J8162A XL Access Controller Module, this value will be 1. Otherwise, this value will be the number of HP J8162A XL Access Controller Modules this system is connected to (i.e. An Access Control Server 740wl connects to multiple HP J8162A XL Access Controller Module's). | ||||
| ShpNumClients | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.2.2 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The total number of active authenticated or unauthenticated clients known to this system. If this device is an HP J8162A XL Access Controller Module, then this object reports the aggregated number of clients across all ports. If this device is a Access Control Server 740wl, it reports all Clients aggregated across all HP J8162A XL Access Controller Modules known to this system. | ||||
| NhpNotificationsConfig | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.3 | |||
| ShpFailoverNotificationEnabled | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.3.1 | TruthValue | RW | |
scalar · TruthValue · read-write · current This object controls whether a hpFailover notification will
be sent in the event of a failover occurrence between a primary
and standby system. By default this object is set to false(2)
for all systems. | ||||
| ShpDistributionNotificationEnabled | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.3.2 | TruthValue | RW | |
scalar · TruthValue · read-write · current This object controls whether a hpDistribution notification will
be sent in the event of a distribution event between a central
and remote systems. By default this object is set to false(2)
for all systems. | ||||
| ShpAdminAuthFailureNotificationEnabled | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.3.3 | TruthValue | RW | |
scalar · TruthValue · read-write · current This object controls whether a hpAdminAuthFailure notification will be sent in the event of a failed authentication attempt at the administrator login. | ||||
| NhpSystemMIBConformance | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3 | |||
| NhpCompliances | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.1 | |||
| MhpSystemMIBCompliance1 | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.1.1 | |||
compliance · current The compliance statement for entities which implement the HP-SYSTEM-MIB. | ||||
| NhpGroups | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.2 | |||
| GhpSystemGroup | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.2.1 | |||
group · current A collection of objects providing system information applicable to all devices. | ||||
| GhpEnvGroup | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.2.2 | |||
group · current A collection of objects providing environmental information applicable to all devices. | ||||
| GhpConfigGroup | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.2.3 | |||
group · current A collection of objects providing configuration information applicable to all devices. | ||||
| GhpStatusGroup | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.2.4 | |||
group · current A collection of objects providing statistics applicable to all HP J8162A XL Access Controller Module like devices.
| ||||
| GhpNotificationsConfigGroup | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.2.5 | |||
group · current A collection of objects providing notification configuration information applicable to all devices. | ||||
| GhpNotificationsGroup | 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.2.6 | |||
group · current notifications for primary failover, and authorization failures, applicable to all devices. | ||||
Traps / Notifications
- fanDown
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0.1 - fanUp
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0.2 - hpAdminAuthFailure
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0.6 - hpDistributionEvent
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0.5 - hpFailover
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0.4 - temperatureAlarm
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0.3