HP-SN-VSRP-MIB
Hewlett-Packardsnmptranslate -m HP-SN-VSRP-MIB -Tpsnmpwalk -v2c -c <community> -m HP-SN-VSRP-MIB <host> 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.1Imports
| HP-SN-SWITCH-GROUP-MIB | snVsrp |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| NsnVsrpGlobal | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.1 | |||
| SsnVsrpGroupOperModeVsrp | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.1.1 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory The VSRP is configured on this system either enabled or
disabled and thedefault is disabled mode.
disabled(0)..........disable VSRP
enabled(1)...........activate VSRP
| ||||
| SsnVsrpIfStateChangeTrap | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.1.2 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Indicates whether the SNMP agent process is permitted to generate VSRP interface state change traps.
| ||||
| SsnVsrpIfMaxNumVridPerIntf | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.1.3 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Indicates the maximum number of VRID per interface. | ||||
| SsnVsrpIfMaxNumVridPerSystem | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.1.4 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Indicates the maximum number of VRID per system. | ||||
| SsnVsrpClearVrrpStat | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.1.5 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Clear VSRP statistics command.
| ||||
| NsnVsrpIfIntf | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.2 | |||
| TsnVsrpIfTable | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.2.1 | NA | mandatory | |
table · not-accessible · mandatory The VSRP Interface Table describes the interfaces from the viewpoint of VSRP. | ||||
| RsnVsrpIfEntry | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.2.1.1 | NA | mandatory | |
row · not-accessible · mandatory The VSRP Interface Entry describes one interface from the viewpoint of VSRP.
| ||||
| CsnVsrpIfVlanId | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.2.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Vlan index. | ||||
| CsnVsrpIfAuthType | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.2.1.1.2 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The authentication type of this interface.
| ||||
| CsnVsrpIfAuthPassword | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.2.1.1.3 | OCTET STRING (SIZE (0..7)) | RW | mandatory |
column · OCTET STRING (SIZE (0..7)) · read-write · mandatory The simple text password is allowed if only if the snVsrpIfAuthType type is simpleTextPasswd. | ||||
| NsnVsrpVirRtr | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3 | |||
| TsnVsrpVirRtrTable | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1 | NA | mandatory | |
table · not-accessible · mandatory The vsrp virtual router Entry describes one virtual router from the viewpoint of vsrp. | ||||
| RsnVsrpVirRtrEntry | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1 | NA | mandatory | |
row · not-accessible · mandatory The vsrp virtual router Entry describes one virtual router from the viewpoint of vsrp. | ||||
| CsnVsrpVirRtrVlanId | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Vlan index. | ||||
| CsnVsrpVirRtrId | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.2 | INTEGER (1..255) | RO | mandatory |
column · INTEGER (1..255) · read-only · mandatory One of the virtual router ID of this vsrp interface. | ||||
| CsnVsrpVirRtrOwnership | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.3 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The ownership of this vsrp router interface can be set to backup(2). VirRtr SNMP-GET returns incomplete(0), it means no IP address has assigned to this vsrp router interface.
| ||||
| CsnVsrpVirRtrCfgPriority | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.4 | INTEGER (1..254) | RW | mandatory |
column · INTEGER (1..254) · read-write · mandatory The higher the number the higher the priority is. This parameter decides which backup router should becomes the Active Router for the interface. A backup Router with higher priority selected to becomes the Active Router. Therefore, this Object can be set if only if snVsrpVirRtrOwnership is set to backup(2). | ||||
| CsnVsrpVirRtrTrackPriority | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.5 | INTEGER (1..254) | RW | mandatory |
column · INTEGER (1..254) · read-write · mandatory The higher the number the higher the priority is.
after this object is configured, the snVsrpVirRtrCurrPriority
of this interface will be adjusted dynamically with this
track priority when the Track Port states first
changes from UP to DOWN. | ||||
| CsnVsrpVirRtrCurrPriority | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.6 | INTEGER (1..254) | RO | mandatory |
column · INTEGER (1..254) · read-only · mandatory The higher the number the higher the priority is.
This object will be adjusted dynamically with the
track priority when the Track Port states first
changes from UP to DOWN. | ||||
| CsnVsrpVirRtrHelloInt | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.7 | INTEGER (1..84) | RW | mandatory |
column · INTEGER (1..84) · read-write · mandatory Time interval between advertisements (seconds). | ||||
| CsnVsrpVirRtrDeadInt | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.8 | INTEGER (0..84) | RW | mandatory |
column · INTEGER (0..84) · read-write · mandatory Dead interval (seconds). | ||||
| CsnVsrpVirRtrPreemptMode | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.9 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This mode controls whether a higher priority Backup router preempts a lower priority Master. The mode with enabled(1) allow preemption and disabled(0) prohibit preemption.
| ||||
| CsnVsrpVirRtrState | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.10 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This object specifies the vsrp Router's interface state as: init(0)...initialization state. master(1)...master state. backup(2)...backup state.
| ||||
| CsnVsrpVirRtrIpAddrMask | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.11 | OCTET STRING (SIZE (64)) | RW | mandatory |
column · OCTET STRING (SIZE (64)) · read-write · mandatory The numbers of IP Addresses of this virtual router of this interface, this holds good for L3 vsrp. | ||||
| CsnVsrpVirRtrActivate | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.12 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object specifies the vsrp Router's activate command as: disabled(0)...deactivate this vsrp Router. enabled(1)....activate this vsrp Router.
| ||||
| CsnVsrpVirRtrTrackPortList | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.13 | OCTET STRING | RW | mandatory |
column · OCTET STRING · read-write · mandatory This object specifies the identity of the physical port and virtual ports
whose state is to be monitored. Each port index is
an ifIndex, if there are consecutive 4 or more ifIndex then
they will be encoded like below.
Encoding and decoding scheme is range based:
Each range prefix with 0000 (2 octets) where 0000 is not valid
ifIndex. Next 2 octets indicates lower range ifIndex, followed by 2
octets of higher range ifIndex. Individual(non range) ones will be displayed as it is.
Ex:
port list: 0001..0005 0015 0032..0047
Port list in PDU: 0000 0001 0005 000f 0000 0020 002f.
If this object is configured
then the Preference Level of this interface will be adjusted
dynamically depending on the state of the Track Port.
The interface's Preference Level is reduced by value of
Preference Level parameter when the Track Port states first
changes from UP to DOWN. When the Track Port next comes up
the interface's Preference Level is increased by the amount
specified by the Preference Level.
The router VSRP physical track port membership. | ||||
| CsnVsrpVirRtrAdvertiseBackup | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.14 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Set Advertise this backup router to master
| ||||
| CsnVsrpVirRtrHoldDownInt | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.15 | INTEGER (1..84) | RW | mandatory |
column · INTEGER (1..84) · read-write · mandatory VSRP protection mechanism, an extra delay for a switch in backup mode to upgrade itself to master mode | ||||
| CsnVsrpVirRtrInitTtl | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.16 | INTEGER (1..255) | RW | mandatory |
column · INTEGER (1..255) · read-write · mandatory VSRP:TTL in the hello packet to regulate the distance that a hello packet can travel. It prevents the flooding of VSRP hello packets in the network | ||||
| CsnVsrpVirRtrIncPortList | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.17 | OCTET STRING | RW | mandatory |
column · OCTET STRING · read-write · mandatory Include all free ports of the VLAN into its control ports | ||||
| CsnVsrpVirRtrSave | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.18 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Set VSRP to save current parameters value
| ||||
| CsnVsrpVirRtrBackupInt | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.19 | INTEGER (60..3600) | RW | mandatory |
column · INTEGER (60..3600) · read-write · mandatory Time interval between backup routers hello message advertisements (seconds). | ||||
| CsnVsrpVirRtrRowStatus | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.20 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an existing row
VirRtr the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid
| ||||
| CsnVsrpVirRtrRxArpPktDropCnts | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.21 | Counter | RO | mandatory |
column · Counter · read-only · mandatory The received vsrp ARP Packet Drop Counts. | ||||
| CsnVsrpVirRtrRxIpPktDropCnts | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.22 | Counter | RO | mandatory |
column · Counter · read-only · mandatory The received VSRP IP Packet Drop Counts. | ||||
| CsnVsrpVirRtrRxPortMismatchCnts | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.23 | Counter | RO | mandatory |
column · Counter · read-only · mandatory The received vsrp Port mismatching Counts. | ||||
| CsnVsrpVirRtrRxNumOfIpMismatchCnts | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.24 | Counter | RO | mandatory |
column · Counter · read-only · mandatory The received VSRP Number of IP Addresses mismatching Counts. | ||||
| CsnVsrpVirRtrRxIpMismatchCnts | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.25 | Counter | RO | mandatory |
column · Counter · read-only · mandatory The received vsrp IP Address mismatching Counts. | ||||
| CsnVsrpVirRtrRxHelloIntMismatchCnts | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.26 | Counter | RO | mandatory |
column · Counter · read-only · mandatory The counts of the virtual router interface with hello interval mismatch counts. | ||||
| CsnVsrpVirRtrRxPriorityZeroFromMasterCnts | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.27 | Counter | RO | mandatory |
column · Counter · read-only · mandatory The counts of the virtual router interface with Priority zero from the master. | ||||
| CsnVsrpVirRtrRxHigherPriorityCnts | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.28 | Counter | RO | mandatory |
column · Counter · read-only · mandatory The counts of the virtual router interface with higher Priority. | ||||
| CsnVsrpVirRtrTransToMasterStateCnts | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.29 | Counter | RO | mandatory |
column · Counter · read-only · mandatory The counts of the virtual router interface transition to master state. | ||||
| CsnVsrpVirRtrTransToBackupStateCnts | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.30 | Counter | RO | mandatory |
column · Counter · read-only · mandatory The counts of the virtual router interface transition to backup state. | ||||
| CsnVsrpVirRtrCurrDeadInt | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.31 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Current Dead interval (in 100 milliseconds). | ||||
| CsnVsrpVirRtrCurHelloInt | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.32 | INTEGER (1..84) | RO | mandatory |
column · INTEGER (1..84) · read-only · mandatory Set backup router hello interval | ||||
| CsnVsrpVirRtrCurHoldDownInt | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.33 | INTEGER (1..84) | RO | mandatory |
column · INTEGER (1..84) · read-only · mandatory VSRP protection mechanism, an extra delay for a switch in backup mode to upgrade itself to master mode | ||||
| CsnVsrpVirRtrCurInitTtl | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.34 | INTEGER (1..255) | RO | mandatory |
column · INTEGER (1..255) · read-only · mandatory VSRP:TTL in the hello packet to regulate the distance that a hello packet can travel. It prevents the flooding of VSRP hello packets in the network | ||||
| CsnVsrpVirRtrHelloMacAddress | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.35 | MacAddress | RO | mandatory |
column · MacAddress · read-only · mandatory Hello MAC address. | ||||
| CsnVsrpVirRtrMasterIpAddr | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.36 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The master router's real/virtual (primary) IP address. This is the IP address listed as the source in vsrp advertisement last received by this virtual router. | ||||