HP-SN-IPX-MIB
Hewlett-Packardsnmptranslate -m HP-SN-IPX-MIB -Tpsnmpwalk -v2c -c <community> -m HP-SN-IPX-MIB <host> 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1Imports
| HP-SN-ROOT-MIB | snIpx |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| NsnIpxGen | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1 | |||
| SsnIpxRoutingMode | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.1 | RtrStatus | RW | mandatory |
scalar · RtrStatus · read-write · mandatory Enabled/Disabled System IPX Routing Mode status. | ||||
| SsnIpxNetBiosFilterMode | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.2 | RtrStatus | RW | mandatory |
scalar · RtrStatus · read-write · mandatory Enabled/Disabled NetBios Filter Mode status. | ||||
| SsnIpxClearCache | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.3 | ClearStatus | RW | mandatory |
scalar · ClearStatus · read-write · mandatory clear(1) will clear cache table. | ||||
| SsnIpxClearRoute | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.4 | ClearStatus | RW | mandatory |
scalar · ClearStatus · read-write · mandatory clear(1) will clear ipx route table. | ||||
| SsnIpxClearTrafficCnts | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.5 | ClearStatus | RW | mandatory |
scalar · ClearStatus · read-write · mandatory clear(1) will clear ipx all traffic counters. - snIpxRcvPktsCnt, snIpxFwdPktsCnt, snIpxRcvDropPktsCnt, snIpxTxDropPktsCnt, snIpxRcvFiltPktsCnt, snIpxTxFiltPktsCnt. | ||||
| SsnIpxRcvPktsCnt | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.6 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory IPX incoming packets counter. | ||||
| SsnIpxTxPktsCnt | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.7 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory IPX Outgoing packets counter. | ||||
| SsnIpxFwdPktsCnt | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.8 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory IPX forwarding packets counter. | ||||
| SsnIpxRcvDropPktsCnt | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.9 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory IPX receiving drop packets counter. | ||||
| SsnIpxRcvFiltPktsCnt | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.10 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory IPX receiving filter packets counter. | ||||
| SsnIpxRipGblFiltList | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.11 | OCTET STRING (SIZE (1..32)) | RW | mandatory |
scalar · OCTET STRING (SIZE (1..32)) · read-write · mandatory An IPX RIP Global Filter List. | ||||
| SsnIpxRipFiltOnAllPort | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.12 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Apply the IPX RIP Global filter list snIpxRipGblFiltList to all interfaces. This object is used to add all RIP filter lists and delete all RIP filter lists to/from all ports. Prior to sending this command, snIpxRipGblFiltList must be ready. The values that can be written are: deleteAllInBound(2)...delete all in-bound filter lists from all ports. deleteAllOutBound(3)..delete all out-bound filter lists from all ports. addAllInBound(4)......add all in-bound filter lists to all ports. addAllOutBound(5).....add all out-bound filter lists to all ports. If set operation is failed, then a SET with value of (2)or(3) returns error 'GenError'. Deleted(2)&(3) go away immediately. The following values can be returned on reads: noSuch(0)...no such operation yet. valid(1)....set operation is done and is valid
| ||||
| SsnIpxSapGblFiltList | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.13 | OCTET STRING (SIZE (1..32)) | RW | mandatory |
scalar · OCTET STRING (SIZE (1..32)) · read-write · mandatory An IPX SAP Global Filter List. | ||||
| SsnIpxSapFiltOnAllPort | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.14 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Apply the IPX SAP Global filter list snIpxSapGblFiltList to all interfaces. This object is used to add all RIP filter lists and delete all SAP filter lists to/from all ports. Prior to sending this command, snIpxSapGblFiltList must be ready. The values that can be written are: deleteAllInBound(2)...delete all in-bound filter lists from all ports. deleteAllOutBound(3)..delete all out-bound filter lists from all ports. addAllInBound(4)......add all in-bound filter lists to all ports. addAllOutBound(5).....add all out-bound filter lists to all ports. If set operation is failed, then a SET with value of (2)or(3) returns error 'GenError'. Deleted(2)&(3) go away immediately. The following values can be returned on reads: noSuch(0)...no such operation yet. valid(1)....set operation is done and is valid
| ||||
| SsnIpxTxDropPktsCnt | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.15 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory IPX transmitting drop packets counter. | ||||
| SsnIpxTxFiltPktsCnt | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.16 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory IPX transmitting filter packets counter. | ||||
| NsnIpxCache | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.2 | |||
| TsnIpxCacheTable | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1 | NA | mandatory | |
table · not-accessible · mandatory IPX Cache table. | ||||
| RsnIpxCacheEntry | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1 | NA | mandatory | |
| CsnIpxCacheIndex | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The table index for a IPX Cache entry. | ||||
| CsnIpxCacheNetNum | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.2 | NetNumber | RO | mandatory |
column · NetNumber · read-only · mandatory Cache Network number. | ||||
| CsnIpxCacheNode | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.3 | PhysAddress | RO | mandatory |
column · PhysAddress · read-only · mandatory Cache Node Number. | ||||
| CsnIpxCacheOutFilter | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.4 | RtrStatus | RO | mandatory |
column · RtrStatus · read-only · mandatory Cache Outbound Filter is ether disabled(0) or enabled(1). | ||||
| CsnIpxCacheEncap | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The IPX encapsulation frame type.
| ||||
| CsnIpxCachePort | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.6 | PortIndex | RO | mandatory |
column · PortIndex · read-only · mandatory IPX Router Port number. | ||||
| NsnIpxRoute | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.3 | |||
| TsnIpxRouteTable | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1 | NA | mandatory | |
table · not-accessible · mandatory IPX route table. | ||||
| RsnIpxRouteEntry | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1 | NA | mandatory | |
| CsnIpxRouteIndex | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The table index for a IPX route entry. | ||||
| CsnIpxDestNetNum | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.2 | NetNumber | RO | mandatory |
column · NetNumber · read-only · mandatory Destination Network number. | ||||
| CsnIpxFwdRouterNode | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.3 | PhysAddress | RO | mandatory |
column · PhysAddress · read-only · mandatory Forward Router Node Number. | ||||
| CsnIpxDestHopCnts | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Number of hops to reach the destination. | ||||
| CsnIpxRouteMetric | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The metrics to next hop router. | ||||
| CsnIpxDestPort | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The destination port. | ||||
| NsnIpxServer | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.4 | |||
| TsnIpxServerTable | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1 | NA | mandatory | |
table · not-accessible · mandatory IPX Server table. | ||||
| RsnIpxServerEntry | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1 | NA | mandatory | |
| CsnIpxServerIndex | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The table index for a IPX Server entry. | ||||
| CsnIpxServerType | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory IPX Server Type. | ||||
| CsnIpxServerNetNum | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.3 | NetNumber | RO | mandatory |
column · NetNumber · read-only · mandatory Server Network number. | ||||
| CsnIpxServerNode | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.4 | PhysAddress | RO | mandatory |
column · PhysAddress · read-only · mandatory Server Node Number. | ||||
| CsnIpxServerSocket | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Server Socket Number. | ||||
| CsnIpxServerHopCnts | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Number of intervening networks to reach the server. | ||||
| CsnIpxServerName | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.7 | OCTET STRING (SIZE (0..47)) | RO | mandatory |
column · OCTET STRING (SIZE (0..47)) · read-only · mandatory IPX Server Name. | ||||
| NsnIpxFwdFilter | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5 | |||
| TsnIpxFwdFilterTable | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1 | NA | mandatory | |
table · not-accessible · mandatory IPX Forward Filter table. | ||||
| RsnIpxFwdFilterEntry | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1 | NA | mandatory | |
| CsnIpxFwdFilterIdx | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The filter ID for a filter entry. | ||||
| CsnIpxFwdFilterAction | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.2 | Action | RW | mandatory |
column · Action · read-write · mandatory Action to take if the ipx packet match with this filter. | ||||
| CsnIpxFwdFilterSocket | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.3 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory IPX Forward Filter Socket Number. | ||||
| CsnIpxFwdFilterSrcNet | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.4 | NetNumber | RW | mandatory |
column · NetNumber · read-write · mandatory Source Network Number. | ||||
| CsnIpxFwdFilterSrcNode | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.5 | PhysAddress | RW | mandatory |
column · PhysAddress · read-write · mandatory Source Node Number. | ||||
| CsnIpxFwdFilterDestNet | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.6 | NetNumber | RW | mandatory |
column · NetNumber · read-write · mandatory Destination Network Number. | ||||
| CsnIpxFwdFilterDestNode | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.7 | PhysAddress | RW | mandatory |
column · PhysAddress · read-write · mandatory Destination Node Number. | ||||
| CsnIpxFwdFilterRowStatus | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.8 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid
| ||||
| NsnIpxRipFilter | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.6 | |||
| TsnIpxRipFilterTable | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1 | NA | mandatory | |
table · not-accessible · mandatory IPX RIP Filter table. | ||||
| RsnIpxRipFilterEntry | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1 | NA | mandatory | |
| CsnIpxRipFilterId | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The filter ID for a filter entry. | ||||
| CsnIpxRipFilterAction | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.2 | Action | RW | mandatory |
column · Action · read-write · mandatory Action to take if the ipx packet match with this filter. | ||||
| CsnIpxRipFilterNet | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.3 | NetNumber | RW | mandatory |
column · NetNumber · read-write · mandatory IPX RIP Filter Network number. | ||||
| CsnIpxRipFilterMask | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.4 | NetNumber | RW | mandatory |
column · NetNumber · read-write · mandatory IPX RIP Filter Network/Subnet Mask. | ||||
| CsnIpxRipFilterRowStatus | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.5 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid
| ||||
| NsnIpxSapFilter | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.7 | |||
| TsnIpxSapFilterTable | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1 | NA | mandatory | |
table · not-accessible · mandatory IPX SAP Filter table. | ||||
| RsnIpxSapFilterEntry | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1 | NA | mandatory | |
| CsnIpxSapFilterId | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The filter ID for a filter entry. | ||||
| CsnIpxSapFilterAction | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.2 | Action | RW | mandatory |
column · Action · read-write · mandatory Action to take if the ipx packet match with this filter. | ||||
| CsnIpxSapFilterType | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.3 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory IPX SAP Filter type to be matched. | ||||
| CsnIpxSapFilterName | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.4 | OCTET STRING (SIZE (0..47)) | RW | mandatory |
column · OCTET STRING (SIZE (0..47)) · read-write · mandatory IPX SAP Filter Name. | ||||
| CsnIpxSapFilterRowStatus | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.5 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid
| ||||
| NsnIpxIfFwdAccess | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.8 | |||
| TsnIpxIfFwdAccessTable | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1 | NA | mandatory | |
table · not-accessible · mandatory IPX IF Forward Access table. | ||||
| RsnIpxIfFwdAccessEntry | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1 | NA | mandatory | |
row · not-accessible · mandatory An entry in the IPX Forward Access table. | ||||
| CsnIpxIfFwdAccessPort | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The IPX interface to which the Forward Filter applies. | ||||
| CsnIpxIfFwdAccessDir | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The access direction of incoming packet filter or outgoing packet filter.
| ||||
| CsnIpxIfFwdAccessFilterList | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1.3 | OCTET STRING (SIZE (1..32)) | RW | mandatory |
column · OCTET STRING (SIZE (1..32)) · read-write · mandatory An IPX IF Forward Filter List. | ||||
| CsnIpxIfFwdAccessRowStatus | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1.4 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid
| ||||
| NsnIpxIfRipAccess | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.9 | |||
| TsnIpxIfRipAccessTable | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1 | NA | mandatory | |
table · not-accessible · mandatory IPX IF RIP Access table. | ||||
| RsnIpxIfRipAccessEntry | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1 | NA | mandatory | |
row · not-accessible · mandatory An entry in the IPX Forward Access table. | ||||
| CsnIpxIfRipAccessPort | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The IPX interface to which the RIP Filter applies. | ||||
| CsnIpxIfRipAccessDir | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The access direction of incoming packet filter or outgoing packet filter.
| ||||
| CsnIpxIfRipAccessFilterList | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1.3 | OCTET STRING (SIZE (1..32)) | RW | mandatory |
column · OCTET STRING (SIZE (1..32)) · read-write · mandatory An IPX IF RIP Access Filter List. | ||||
| CsnIpxIfRipAccessRowStatus | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1.4 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid
| ||||
| NsnIpxIfSapAccess | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.10 | |||
| TsnIpxIfSapAccessTable | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1 | NA | mandatory | |
table · not-accessible · mandatory IPX IF RIP Access table. | ||||
| RsnIpxIfSapAccessEntry | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1 | NA | mandatory | |
row · not-accessible · mandatory An entry in the IPX Forward Access table. | ||||
| CsnIpxIfSapAccessPort | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The IPX interface to which the SAP Filter applies. | ||||
| CsnIpxIfSapAccessDir | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The access direction of incoming packet filter or outgoing packet filter.
| ||||
| CsnIpxIfSapAccessFilterList | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1.3 | OCTET STRING (SIZE (1..32)) | RW | mandatory |
column · OCTET STRING (SIZE (1..32)) · read-write · mandatory An IPX IF SAP Access Filter List. | ||||
| CsnIpxIfSapAccessRowStatus | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1.4 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid
| ||||
| NsnIpxPortAddr | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.11 | |||
| TsnIpxPortAddrTable | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1 | NA | mandatory | |
table · not-accessible · mandatory IPX port address table. | ||||
| RsnIpxPortAddrEntry | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1 | NA | mandatory | |
row · not-accessible · mandatory An entry in the IPX Port Address table. | ||||
| CsnIpxPortAddrPort | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.1 | PortIndex | RO | mandatory |
column · PortIndex · read-only · mandatory The port index for port address entry. | ||||
| CsnIpxPortAddrEncap | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The IPX encapsulation type. ethernet8022(1), ethernet8023(2), ethernetII(3), ethernetSnap(4) Note: Each Network Number can be assigned with one unique Frame type; Otherwise, a SNMP-SET error will be returned.
| ||||
| CsnIpxPortAddrNetNum | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.3 | NetNumber | RW | mandatory |
column · NetNumber · read-write · mandatory An unique Network number for the IPX interface port. | ||||
| CsnIpxPortAddrRowStatus | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.4 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid
| ||||
| CsnIpxPortAddrNetBiosFilterMode | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.5 | RtrStatus | RW | mandatory |
column · RtrStatus · read-write · mandatory Enabled/Disabled NetBios Filter Mode status per Port Address entry. | ||||
| NsnIpxPortCounters | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.12 | |||
| TsnIpxPortCountersTable | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1 | NA | mandatory | |
table · not-accessible · mandatory IPX port Counters table. | ||||
| RsnIpxPortCountersEntry | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1 | NA | mandatory | |
| CsnIpxPortCountersPort | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.1 | PortIndex | RO | mandatory |
column · PortIndex · read-only · mandatory The port index for port Counters entry. | ||||
| CsnIpxPortCountersRcvPktsCnt | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.2 | Counter | RO | mandatory |
column · Counter · read-only · mandatory IPX incoming packets counter for the interface. | ||||
| CsnIpxPortCountersTxPktsCnt | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.3 | Counter | RO | mandatory |
column · Counter · read-only · mandatory IPX Outgoing packets counter for the interface. | ||||
| CsnIpxPortCountersFwdPktsCnt | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.4 | Counter | RO | mandatory |
column · Counter · read-only · mandatory IPX forwarding packets counter for the interface. | ||||
| CsnIpxPortCountersRcvDropPktsCnt | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.5 | Counter | RO | mandatory |
column · Counter · read-only · mandatory IPX receiving drop packets counter for the interface. | ||||
| CsnIpxPortCountersTxDropPktsCnt | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.6 | Counter | RO | mandatory |
column · Counter · read-only · mandatory IPX transmitting drop packets counter for the interface. | ||||
| CsnIpxPortCountersRcvFiltPktsCnt | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.7 | Counter | RO | mandatory |
column · Counter · read-only · mandatory IPX receiving filter packets counter for the interface. | ||||
| CsnIpxPortCountersTxFiltPktsCnt | 1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.8 | Counter | RO | mandatory |
column · Counter · read-only · mandatory IPX transmitting filter packets counter for the interface. | ||||