HP-SN-BGP4-GROUP-MIB
Hewlett-Packardsnmptranslate -m HP-SN-BGP4-GROUP-MIB -Tpsnmpwalk -v2c -c <community> -m HP-SN-BGP4-GROUP-MIB <host> 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1Imports
| HP-SN-ROOT-MIB | snBgp4 |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| NsnBgp4Gen | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1 | |||
| SsnBgp4GenAlwaysCompareMed | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.1 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory To enable/disable the comparison of the Multi-Exit Discriminator for paths from neighbors in different AS.
| ||||
| SsnBgp4GenAutoSummary | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.2 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory To enable/disable the default behavior of automatic summarization of subnet routes into network-level routes.
| ||||
| SsnBgp4GenDefaultLocalPreference | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.3 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory To set the default local preference attribute. | ||||
| SsnBgp4GenDefaultInfoOriginate | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.4 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory To enable/disable the default Information Originate.
| ||||
| SsnBgp4GenFastExternalFallover | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.5 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory To enable/disable an action of immediately reset the BGP sessions of any directly adjacent external neighbors if the link used to reach them goes down.
| ||||
| SsnBgp4GenNextBootNeighbors | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.6 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory The next-boot configured number of neighbors in a BGP Peer Group. The minimum value of this MIB is snBgp4GenMinNeighbors. The maximum value of this MIB is snBgp4GenMaxNeighbors. | ||||
| SsnBgp4GenNextBootRoutes | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.7 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory The next-boot configured number of Routes. The minimum value of this MIB is snBgp4GenMinRoutes. The maximum value of this MIB is snBgp4GenMaxRoutes. | ||||
| SsnBgp4GenSynchronization | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.8 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory To enable/disable the synchronization between BGP and your IGP.
| ||||
| SsnBgp4GenKeepAliveTime | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.9 | INTEGER (0..65535) | RW | mandatory |
scalar · INTEGER (0..65535) · read-write · mandatory The Keep alive timer. | ||||
| SsnBgp4GenHoldTime | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.10 | INTEGER (0..65535) | RW | mandatory |
scalar · INTEGER (0..65535) · read-write · mandatory The Hold time timer. | ||||
| SsnBgp4GenRouterId | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.11 | IpAddress | RW | mandatory |
scalar · IpAddress · read-write · mandatory BGP Router Id. | ||||
| SsnBgp4GenTableMap | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.12 | OCTET STRING (SIZE (0..32)) | RW | mandatory |
scalar · OCTET STRING (SIZE (0..32)) · read-write · mandatory An octet string of the route-map name, each character of the name is represented by one octet. | ||||
| SsnBgp4GenAdminStat | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.13 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory The administrative status of BGP4 in the router. The value 'enabled' denotes that the BGP4 routing is active in this router; 'disabled' disables BGP4 routing on this router.
| ||||
| SsnBgp4GenDefaultMetric | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.14 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory To set default metric values for the BGP4 protocol. | ||||
| SsnBgp4GenMaxNeighbors | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.15 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The maximum number of neighbors can be configured in a BGP Peer Group. | ||||
| SsnBgp4GenMinNeighbors | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.16 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The minimum number of neighbors can be configured in a BGP Peer Group. | ||||
| SsnBgp4GenMaxRoutes | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.17 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The maximum configured number of Routes. | ||||
| SsnBgp4GenMinRoutes | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.18 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The minimum configured number of Routes. | ||||
| SsnBgp4GenMaxAddrFilters | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.19 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The maximum configured number of BGP4 address filters. | ||||
| SsnBgp4GenMaxAggregateAddresses | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.20 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The maximum configured number of BGP4 aggregate addresses. | ||||
| SsnBgp4GenMaxAsPathFilters | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.21 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The maximum configured number of BGP4 AS-PATH filters. | ||||
| SsnBgp4GenMaxCommunityFilters | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.22 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The maximum configured number of BGP4 Community filters. | ||||
| SsnBgp4GenMaxNetworks | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.23 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The maximum configured number of BGP4 Networks. | ||||
| SsnBgp4GenMaxRouteMapFilters | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.24 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The maximum configured number of BGP4 Route-map Filters. | ||||
| SsnBgp4GenNeighPrefixMinValue | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.25 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The minimum configured value of BGP4 Neighbor Prefix. | ||||
| SsnBgp4GenOperNeighbors | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.26 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The current operational max number of neighbors configured for a BGP Group. | ||||
| SsnBgp4GenOperRoutes | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.27 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The current operational number of Routes. | ||||
| SsnBgp4GenLocalAs | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.28 | INTEGER (1..65535) | RW | mandatory |
scalar · INTEGER (1..65535) · read-write · mandatory Bgp4 local autonomous system number. | ||||
| SsnBgp4GenRoutesInstalled | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.29 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Bgp4 installed routes. | ||||
| SsnBgp4GenAsPathInstalled | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.30 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Bgp4 installed autonomous system path. | ||||
| SsnBgp4ExternalDistance | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.31 | INTEGER (1..255) | RW | mandatory |
scalar · INTEGER (1..255) · read-write · mandatory Administrative distance for BGP external routes. | ||||
| SsnBgp4InternalDistance | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.32 | INTEGER (1..255) | RW | mandatory |
scalar · INTEGER (1..255) · read-write · mandatory Administrative distance for BGP internal routes. | ||||
| SsnBgp4LocalDistance | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.33 | INTEGER (1..255) | RW | mandatory |
scalar · INTEGER (1..255) · read-write · mandatory Administrative distance for BGP local routes. | ||||
| SsnBgp4OperNumOfAttributes | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.34 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The operational number of attribute entries. | ||||
| SsnBgp4NextBootMaxAttributes | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.35 | INTEGER (200..30000) | RW | mandatory |
scalar · INTEGER (200..30000) · read-write · mandatory The next boot maximum attribute entries. 10000 means reset to default. | ||||
| SsnBgp4ClusterId | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.36 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory A cluster ID which is represented by 4 bytes unsigned integer (0..0xFFFFFFFF). 0 means reset to default. | ||||
| SsnBgp4ClientToClientReflection | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.37 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory To enable/disable the client to client reflection in BGP4.
| ||||
| SsnBgp4GenTotalNeighbors | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.38 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The current total number of neighbors running in a BGP Group. | ||||
| SsnBgp4GenMaxPaths | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.39 | INTEGER (1..8) | RW | mandatory |
scalar · INTEGER (1..8) · read-write · mandatory The maximum configured number of Paths. | ||||
| SsnBgp4GenConfedId | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.40 | INTEGER (1..65535) | RW | mandatory |
scalar · INTEGER (1..65535) · read-write · mandatory Bgp4 Confederation Id. | ||||
| SsnBgp4GenConfedPeers | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.41 | OCTET STRING (SIZE (0..100)) | RW | mandatory |
scalar · OCTET STRING (SIZE (0..100)) · read-write · mandatory An AS number from 1 to 0xFFFF construct confederation peers. There are 50(max peers) of them. This integer number is represented by 2 OCTETs. | ||||
| SsnBgp4GenDampening | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.42 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory The dampening of BGP4 in the router. value 'none' denotes that the BGP4 dampening is off 'parameters' denotes parameters are confibrurable. 'routeMap' denotes routemap is configurable.
| ||||
| SsnBgp4GenDampenHalfLife | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.43 | INTEGER (1..45) | RW | mandatory |
scalar · INTEGER (1..45) · read-write · mandatory Bgp4 Dampening Half Life. | ||||
| SsnBgp4GenDampenReuse | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.44 | INTEGER (1..20000) | RW | mandatory |
scalar · INTEGER (1..20000) · read-write · mandatory Bgp4 Dampening Reuse. | ||||
| SsnBgp4GenDampenSuppress | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.45 | INTEGER (1..20000) | RW | mandatory |
scalar · INTEGER (1..20000) · read-write · mandatory Bgp4 Dampening Suppress. | ||||
| SsnBgp4GenDampenMaxSuppress | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.46 | INTEGER (1..20000) | RW | mandatory |
scalar · INTEGER (1..20000) · read-write · mandatory Bgp4 Dampening Max Suppress Time. | ||||
| SsnBgp4GenDampenMap | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.47 | OCTET STRING (SIZE (0..32)) | RW | mandatory |
scalar · OCTET STRING (SIZE (0..32)) · read-write · mandatory An octet string of the route-map name for dampening, each character of the name is represented by one octet. | ||||
| NsnBgp4AddrFilter | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2 | |||
| TsnBgp4AddrFilterTable | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1 | NA | mandatory | |
table · not-accessible · mandatory Bgp4 Address Filter table. | ||||
| RsnBgp4AddrFilterEntry | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1 | NA | mandatory | |
row · not-accessible · mandatory An entry in the Bgp4 Address Filter table. | ||||
| CsnBgp4AddrFilterIndex | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The table index for a filter entry. | ||||
| CsnBgp4AddrFilterAction | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.2 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Action to take if the bgp address match with this filter.
| ||||
| CsnBgp4AddrFilterSourceIp | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.3 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory Source IP address. | ||||
| CsnBgp4AddrFilterSourceMask | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.4 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory Source IP subnet mask. | ||||
| CsnBgp4AddrFilterDestIp | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.5 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory Destination IP address. | ||||
| CsnBgp4AddrFilterDestMask | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.6 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory Destination IP subnet mask. | ||||
| CsnBgp4AddrFilterRowStatus | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.7 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid
| ||||
| NsnBgp4AggregateAddr | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.3 | |||
| TsnBgp4AggregateAddrTable | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1 | NA | mandatory | |
table · not-accessible · mandatory Bgp4 Aggregate Address table. | ||||
| RsnBgp4AggregateAddrEntry | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1.1 | NA | mandatory | |
row · not-accessible · mandatory An entry in the Bgp4 Aggregate Address table. | ||||
| CsnBgp4AggregateAddrIp | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1.1.1 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory Aggregate Address IP address. | ||||
| CsnBgp4AggregateAddrMask | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1.1.2 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory Aggregate Address IP subnet mask. | ||||
| CsnBgp4AggregateAddrOption | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory address(1), asSet(2), summaryOnly(3), the suppressMap(4), advertiseMap(5), attributeMap(6) are Options for creating an aggregate entry in a BGP routing table.
| ||||
| CsnBgp4AggregateAddrMap | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1.1.4 | OCTET STRING (SIZE (0..32)) | RW | mandatory |
column · OCTET STRING (SIZE (0..32)) · read-write · mandatory This object associates with the snBgp4AggregateAddrOption and the suppressMap(4), advertiseMap(5), attributeMap(6) of the snBgp4AggregateAddrOption are only two Options for creating an aggregate address map. A SNMP-SET error will be returned for other options. An octet string of the map name, each character of the name is represented by one octet. | ||||
| CsnBgp4AggregateAddrRowStatus | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1.1.5 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid
| ||||
| NsnBgp4AsPathFilter | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.4 | |||
| TsnBgp4AsPathFilterTable | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.4.1 | NA | mandatory | |
table · not-accessible · mandatory Bgp4 AS-Path Filter table. | ||||
| RsnBgp4AsPathFilterEntry | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.4.1.1 | NA | mandatory | |
row · not-accessible · mandatory An entry in the Bgp4 As-path Filter table. | ||||
| CsnBgp4AsPathFilterIndex | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.4.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The table index for a filter entry. | ||||
| CsnBgp4AsPathFilterAction | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.4.1.1.2 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Action to take if the bgp address match with this filter.
| ||||
| CsnBgp4AsPathFilterRegExpression | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.4.1.1.3 | OCTET STRING (SIZE (0..256)) | RW | mandatory |
column · OCTET STRING (SIZE (0..256)) · read-write · mandatory Autonomous system in the filter using a regular expression. Each character of the regular expression string is represented by one octet. | ||||
| CsnBgp4AsPathFilterRowStatus | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.4.1.1.4 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid
| ||||
| NsnBgp4CommunityFilter | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5 | |||
| TsnBgp4CommunityFilterTable | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1 | NA | mandatory | |
table · not-accessible · mandatory Bgp4 Community Filter table. | ||||
| RsnBgp4CommunityFilterEntry | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1 | NA | mandatory | |
row · not-accessible · mandatory An entry in the Bgp4 Community Filter table. | ||||
| CsnBgp4CommunityFilterIndex | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The table index for a filter entry. | ||||
| CsnBgp4CommunityFilterAction | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.2 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Action to take if the bgp address match with this filter.
| ||||
| CsnBgp4CommunityFilterCommNum | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.3 | OCTET STRING (SIZE (0..80)) | RW | mandatory |
column · OCTET STRING (SIZE (0..80)) · read-write · mandatory A number from 1 to 0xFFFFFFFF. There are 20 of them. This integer number is represented by 4 OCTETs. | ||||
| CsnBgp4CommunityFilterInternet | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.4 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Disabled/Enabled the Internet Community.
| ||||
| CsnBgp4CommunityFilterNoAdvertise | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.5 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Do not advertise this route to any peer (internal or external).
| ||||
| CsnBgp4CommunityFilterNoExport | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.6 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Do not advertise this route to an EBGP peer.
| ||||
| CsnBgp4CommunityFilterRowStatus | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.7 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid
| ||||
| CsnBgp4CommunityFilterLocalAs | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.8 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Send this route to peers in other sub-autonomous systems within the local confederation. Do not advertise this route to an external system.
| ||||
| NsnBgp4NeighGenCfg | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6 | |||
| TsnBgp4NeighGenCfgTable | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1 | NA | mandatory | |
table · not-accessible · mandatory Bgp4 Neighbor General Configuration table. | ||||
| RsnBgp4NeighGenCfgEntry | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1 | NA | mandatory | |
row · not-accessible · mandatory An entry in the Bgp4 Community Filter table. | ||||
| CsnBgp4NeighGenCfgNeighIp | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.1 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The IP Address for a neighbor entry. | ||||
| CsnBgp4NeighGenCfgAdvertlevel | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.2 | INTEGER (0..600) | RW | mandatory |
column · INTEGER (0..600) · read-write · mandatory To set the minimum interval between the sending of BGP routing updates. | ||||
| CsnBgp4NeighGenCfgDefOriginate | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.3 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory To enable/disable the default originate for this neighbor.
| ||||
| CsnBgp4NeighGenCfgEbgpMultihop | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.4 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory To enable/disable the EBGP Muitihop for this neighbor.
| ||||
| CsnBgp4NeighGenCfgMaxPrefix | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.5 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory To control how many prefixes can be received from a neighbor. The minimum value of the maximum prefix is snBgp4GenNeighPrefixMinValue. The maximum value of the maximum prefix is snBgp4GenOperRoutes. | ||||
| CsnBgp4NeighGenCfgNextHopSelf | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.6 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory To enable/disable the next-hop processing of BGP updates on the router.
| ||||
| CsnBgp4NeighGenCfgRemoteAs | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.7 | INTEGER (1..65535) | RW | mandatory |
column · INTEGER (1..65535) · read-write · mandatory To specify a neighbor with an autonomous system number(AS). | ||||
| CsnBgp4NeighGenCfgSendComm | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.8 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory To specify that a COMMUNITES attribute should be sent to a BGP neighbor.
| ||||
| CsnBgp4NeighGenCfgWeight | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.9 | INTEGER (0..65535) | RW | mandatory |
column · INTEGER (0..65535) · read-write · mandatory To assign a weight to a neighbor connection. | ||||
| CsnBgp4NeighGenCfgWeightFilterList | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.10 | OCTET STRING (SIZE (0..32)) | RW | mandatory |
column · OCTET STRING (SIZE (0..32)) · read-write · mandatory A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. | ||||
| CsnBgp4NeighGenCfgRowStatus | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.11 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
applyDefault(6)...apply default value to an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid
| ||||
| CsnBgp4NeighGenCfgUpdateSrcLpbIntf | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.12 | INTEGER (0..8) | RW | mandatory |
column · INTEGER (0..8) · read-write · mandatory To allow internal BGP sessions to use any operational loopback interface (1..8) for TCP connections. Zero interface means to restore the interface assignment to the closest interface, which is called the best local address. | ||||
| CsnBgp4NeighGenCfgRouteRefClient | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.13 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory To configure the router as a BGP route reflector, enable the specified neighbor as its client. When all the clients are disabled, the local router is no longer a route reflector.
| ||||
| CsnBgp4NeighGenCfgRemovePrivateAs | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.14 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory To enable/disable filtering private AS number.
| ||||
| CsnBgp4NeighGenCfgEbgpMultihopTtl | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.15 | INTEGER (0..255) | RW | mandatory |
column · INTEGER (0..255) · read-write · mandatory The EBGP Muitihop TTL for this neighbor. | ||||
| CsnBgp4NeighGenCfgShutdown | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.16 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory To enable/disable BGP4 Nbr Shutdown.
| ||||
| CsnBgp4NeighGenCfgKeepAliveTime | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.17 | INTEGER (0..65535) | RW | mandatory |
column · INTEGER (0..65535) · read-write · mandatory The Keep alive timer. | ||||
| CsnBgp4NeighGenCfgHoldTime | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.18 | INTEGER (0..65535) | RW | mandatory |
column · INTEGER (0..65535) · read-write · mandatory The Hold time timer. | ||||
| CsnBgp4NeighGenCfgDefOrigMap | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.19 | OCTET STRING (SIZE (0..32)) | RW | mandatory |
column · OCTET STRING (SIZE (0..32)) · read-write · mandatory An octet string of the route-map name, each character of the name is represented by one octet. | ||||
| CsnBgp4NeighGenCfgDesc | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.20 | OCTET STRING (SIZE (0..80)) | RW | mandatory |
column · OCTET STRING (SIZE (0..80)) · read-write · mandatory An octet string of the neighbor description. | ||||
| CsnBgp4NeighGenCfgPass | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.21 | OCTET STRING (SIZE (0..80)) | RW | mandatory |
column · OCTET STRING (SIZE (0..80)) · read-write · mandatory An octet string of the neighbor Md5 password. | ||||
| NsnBgp4NeighDistGroup | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7 | |||
| TsnBgp4NeighDistGroupTable | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1 | NA | mandatory | |
table · not-accessible · mandatory Bgp4 Neighbor Distribute Group table. | ||||
| RsnBgp4NeighDistGroupEntry | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1 | NA | mandatory | |
row · not-accessible · mandatory An entry in the Bgp4 Distribute Group table. | ||||
| CsnBgp4NeighDistGroupNeighIp | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.1 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The IP Address for a neighbor entry. | ||||
| CsnBgp4NeighDistGroupDir | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The incoming/outgoing advertisements to which the access list is applied.
| ||||
| CsnBgp4NeighDistGroupAccessList | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.3 | OCTET STRING (SIZE (0..32)) | RW | mandatory |
column · OCTET STRING (SIZE (0..32)) · read-write · mandatory A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. | ||||
| CsnBgp4NeighDistGroupRowStatus | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.4 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid
| ||||
| CsnBgp4NeighDistGroupInFilterList | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.5 | OCTET STRING (SIZE (0..32)) | RW | mandatory |
column · OCTET STRING (SIZE (0..32)) · read-write · mandatory A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. | ||||
| CsnBgp4NeighDistGroupOutFilterList | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.6 | OCTET STRING (SIZE (0..32)) | RW | mandatory |
column · OCTET STRING (SIZE (0..32)) · read-write · mandatory A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. | ||||
| CsnBgp4NeighDistGroupInIpAccessList | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.7 | OCTET STRING (SIZE (0..2)) | RW | mandatory |
column · OCTET STRING (SIZE (0..2)) · read-write · mandatory A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs. | ||||
| CsnBgp4NeighDistGroupOutIpAccessList | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.8 | OCTET STRING (SIZE (0..2)) | RW | mandatory |
column · OCTET STRING (SIZE (0..2)) · read-write · mandatory A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs. | ||||
| CsnBgp4NeighDistGroupInPrefixList | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.9 | OCTET STRING (SIZE (0..32)) | RW | mandatory |
column · OCTET STRING (SIZE (0..32)) · read-write · mandatory A Prefix name list. | ||||
| CsnBgp4NeighDistGroupOutPrefixList | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.10 | OCTET STRING (SIZE (0..32)) | RW | mandatory |
column · OCTET STRING (SIZE (0..32)) · read-write · mandatory A Prefix name list. | ||||
| NsnBgp4NeighFilterGroup | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8 | |||
| TsnBgp4NeighFilterGroupTable | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1 | NA | mandatory | |
table · not-accessible · mandatory Bgp4 Neighbor Filter Group table. | ||||
| RsnBgp4NeighFilterGroupEntry | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1 | NA | mandatory | |
row · not-accessible · mandatory An entry in the Bgp4 Neighbor Filter Group table. | ||||
| CsnBgp4NeighFilterGroupNeighIp | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.1 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The IP Address for a neighbor entry. | ||||
| CsnBgp4NeighFilterGroupDir | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The incoming/outgoing advertisements to which the access list is applied.
| ||||
| CsnBgp4NeighFilterGroupAccessList | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.3 | OCTET STRING (SIZE (0..32)) | RW | mandatory |
column · OCTET STRING (SIZE (0..32)) · read-write · mandatory A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. | ||||
| CsnBgp4NeighFilterGroupRowStatus | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.4 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid
| ||||
| CsnBgp4NeighFilterGroupInFilterList | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.5 | OCTET STRING (SIZE (0..32)) | RW | mandatory |
column · OCTET STRING (SIZE (0..32)) · read-write · mandatory A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. | ||||
| CsnBgp4NeighFilterGroupOutFilterList | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.6 | OCTET STRING (SIZE (0..32)) | RW | mandatory |
column · OCTET STRING (SIZE (0..32)) · read-write · mandatory A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. | ||||
| CsnBgp4NeighFilterGroupInAsPathAccessList | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.7 | OCTET STRING (SIZE (0..2)) | RW | mandatory |
column · OCTET STRING (SIZE (0..2)) · read-write · mandatory A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs. | ||||
| CsnBgp4NeighFilterGroupOutAsPathAccessList | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.8 | OCTET STRING (SIZE (0..2)) | RW | mandatory |
column · OCTET STRING (SIZE (0..2)) · read-write · mandatory A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs. | ||||
| CsnBgp4NeighFilterGroupWeight | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.9 | INTEGER (0..65535) | RW | mandatory |
column · INTEGER (0..65535) · read-write · mandatory To assign a weight to a neighbor filter. | ||||
| CsnBgp4NeighFilterGroupWeightAccessList | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.10 | OCTET STRING (SIZE (0..2)) | RW | mandatory |
column · OCTET STRING (SIZE (0..2)) · read-write · mandatory A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs. | ||||
| NsnBgp4NeighRouteMap | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.9 | |||
| TsnBgp4NeighRouteMapTable | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.9.1 | NA | mandatory | |
table · not-accessible · mandatory Bgp4 Neighbor Route Map table. | ||||
| RsnBgp4NeighRouteMapEntry | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.9.1.1 | NA | mandatory | |
row · not-accessible · mandatory An entry in the Bgp4 Route Map table. | ||||
| CsnBgp4NeighRouteMapNeighIp | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.9.1.1.1 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The IP Address for a neighbor entry. | ||||
| CsnBgp4NeighRouteMapDir | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.9.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The incoming/outgoing advertisements to which the access list is applied.
| ||||
| CsnBgp4NeighRouteMapMapName | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.9.1.1.3 | OCTET STRING (SIZE (0..32)) | RW | mandatory |
column · OCTET STRING (SIZE (0..32)) · read-write · mandatory An octet string of the route-map name, Each character of the name is represented by one octet. | ||||
| CsnBgp4NeighRouteMapRowStatus | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.9.1.1.4 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid
| ||||
| NsnBgp4Network | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.10 | |||
| TsnBgp4NetworkTable | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1 | NA | mandatory | |
table · not-accessible · mandatory Bgp4 Network Weight table. | ||||
| RsnBgp4NetworkEntry | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1.1 | NA | mandatory | |
row · not-accessible · mandatory An entry in the Bgp4 Network Weight table. | ||||
| CsnBgp4NetworkIp | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1.1.1 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The IP Address for a network entry. | ||||
| CsnBgp4NetworkSubnetMask | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1.1.2 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The subnet mask for a network entry. | ||||
| CsnBgp4NetworkWeight | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1.1.3 | INTEGER (0..65535) | RW | mandatory |
column · INTEGER (0..65535) · read-write · mandatory To assign a weight to a neighbor connection. | ||||
| CsnBgp4NetworkBackdoor | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1.1.4 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory To enable/disable the backdoor for this network.
| ||||
| CsnBgp4NetworkRowStatus | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1.1.5 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid
| ||||
| NsnBgp4Redis | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11 | |||
| TsnBgp4RedisTable | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1 | NA | mandatory | |
table · not-accessible · mandatory The BGP4 Redistribution contains configurations that could be imported into the BGP4 domain. | ||||
| RsnBgp4RedisEntry | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1 | NA | mandatory | |
row · not-accessible · mandatory The BGP4 Redistribution Entry specifies a particular RIP or , OSPF, or Static route to be imported into the BGP4 domain.
| ||||
| CsnBgp4RedisProtocol | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The imported configuration into BGP4 domain is set in the following: rip(1): - the RIP. ospf(2): - the OSPF. static(3): - the static. connected(4): - the connected. isis(5): - the ISIS.
| ||||
| CsnBgp4RedisMetric | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.2 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The metric of using the specified protocol Metric value. | ||||
| CsnBgp4RedisRouteMap | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.3 | OCTET STRING (SIZE (0..32)) | RW | mandatory |
column · OCTET STRING (SIZE (0..32)) · read-write · mandatory An octet string of the route-map name, each character of the name is represented by one octet. | ||||
| CsnBgp4RedisWeight | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.4 | INTEGER (0..65535) | RW | mandatory |
column · INTEGER (0..65535) · read-write · mandatory To assign a weight for the specified protocol. | ||||
| CsnBgp4RedisMatchInternal | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.5 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object is only applicable to the OSPF protocol.
| ||||
| CsnBgp4RedisMatchExternal1 | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.6 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object is only applicable to the OSPF protocol.
| ||||
| CsnBgp4RedisMatchExternal2 | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.7 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object is only applicable to the OSPF protocol.
| ||||
| CsnBgp4RedisRowStatus | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.8 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid
| ||||
| NsnBgp4RouteMapFilter | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.12 | |||
| TsnBgp4RouteMapFilterTable | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.12.1 | NA | mandatory | |
table · not-accessible · mandatory Bgp4 RouteMap Filter table. | ||||
| RsnBgp4RouteMapFilterEntry | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.12.1.1 | NA | mandatory | |
row · not-accessible · mandatory An entry in the Bgp4 RouteMap Filter table. | ||||
| CsnBgp4RouteMapFilterMapName | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.12.1.1.1 | OCTET STRING (SIZE (0..32)) | RO | mandatory |
column · OCTET STRING (SIZE (0..32)) · read-only · mandatory An octet string of the route-map name, each character of the name is represented by one octet. | ||||
| CsnBgp4RouteMapFilterSequenceNum | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.12.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory A sequence number for this particular route-map. | ||||
| CsnBgp4RouteMapFilterAction | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.12.1.1.3 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Action to take if the bgp address match with this filter.
| ||||
| CsnBgp4RouteMapFilterRowStatus | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.12.1.1.4 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid
| ||||
| NsnBgp4RouteMapMatch | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13 | |||
| TsnBgp4RouteMapMatchTable | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1 | NA | mandatory | |
table · not-accessible · mandatory Bgp4 Route Map Set table. | ||||
| RsnBgp4RouteMapMatchEntry | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1 | NA | mandatory | |
row · not-accessible · mandatory An entry in the Bgp4 Route Map Match table. | ||||
| CsnBgp4RouteMapMatchMapName | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.1 | OCTET STRING (SIZE (0..32)) | RO | mandatory |
column · OCTET STRING (SIZE (0..32)) · read-only · mandatory An octet string of the route-map name, each character of the name is represented by one octet. | ||||
| CsnBgp4RouteMapMatchSequenceNum | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory A sequence number for this particular route-map. | ||||
| CsnBgp4RouteMapMatchAsPathFilter | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.3 | OCTET STRING (SIZE (0..20)) | RW | mandatory |
column · OCTET STRING (SIZE (0..20)) · read-write · mandatory A number from 1 to 0xFFFF and there are 10 of 2 OCTETs.
This integer number is represented by 2 OCTETs.
To match a BGP autonomous system path access list. | ||||
| CsnBgp4RouteMapMatchCommunityFilter | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.4 | OCTET STRING (SIZE (0..20)) | RW | mandatory |
column · OCTET STRING (SIZE (0..20)) · read-write · mandatory A number from 1 to 0xFFFF and there are 10 of 2 OCTETs.
This integer number is represented by 2 OCTETs.
To match a BGP community access list. | ||||
| CsnBgp4RouteMapMatchAddressFilter | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.5 | OCTET STRING (SIZE (0..20)) | RW | mandatory |
column · OCTET STRING (SIZE (0..20)) · read-write · mandatory A number from 1 to 0xFFFF and there are 10 of 2 OCTETs.
This integer number is represented by 2 OCTETs.
To match a BGP address access list. | ||||
| CsnBgp4RouteMapMatchMetric | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.6 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory To match a metric for BGP routes. | ||||
| CsnBgp4RouteMapMatchNextHopList | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.7 | OCTET STRING (SIZE (0..32)) | RW | mandatory |
column · OCTET STRING (SIZE (0..32)) · read-write · mandatory A number from 1 to 0xFFFF and there are 16 of 2 OCTETs.
This integer number is represented by 2 OCTETs.
To match a BGP next-hop access list. | ||||
| CsnBgp4RouteMapMatchRouteType | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.8 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory To match a route-type. Currently only externalType1(2), externalType2(3), internal(4) is supported for SNMP-SET.
| ||||
| CsnBgp4RouteMapMatchTagList | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.9 | OCTET STRING (SIZE (0..32)) | RW | mandatory |
column · OCTET STRING (SIZE (0..32)) · read-write · mandatory To match a BGP tag access list. | ||||
| CsnBgp4RouteMapMatchRowMask | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.10 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object is used together with above MIBs in the same VARBIND to set and reset any MIBs in the table. The bit number is referred to the snBgp4RouteMapMatchEntry number of each row in the table. The bit is ON - means set, The bit is OFF - means reset | ||||
| CsnBgp4RouteMapMatchAsPathAccessList | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.11 | OCTET STRING (SIZE (0..20)) | RW | mandatory |
column · OCTET STRING (SIZE (0..20)) · read-write · mandatory A number from 1 to 0xFFFFFFFF and there are 5 of 4 OCTETs.
This integer number is represented by 4 OCTETs.
To match a BGP autonomous system path access list. | ||||
| CsnBgp4RouteMapMatchCommunityList | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.12 | OCTET STRING (SIZE (0..20)) | RW | mandatory |
column · OCTET STRING (SIZE (0..20)) · read-write · mandatory A number from 1 to 0xFFFFFFFF and there are 5 of 4 OCTETs.
This integer number is represented by 4 OCTETs.
To match a BGP community access list. | ||||
| CsnBgp4RouteMapMatchAddressAccessList | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.13 | OCTET STRING (SIZE (0..10)) | RW | mandatory |
column · OCTET STRING (SIZE (0..10)) · read-write · mandatory A number from 1 to 0xFFFF and there are 5 of 2 OCTETs.
This integer number is represented by 2 OCTETs.
To match a BGP address access list. | ||||
| CsnBgp4RouteMapMatchAddressPrefixList | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.14 | OCTET STRING (SIZE (0..170)) | RW | mandatory |
column · OCTET STRING (SIZE (0..170)) · read-write · mandatory Prefix list To match a BGP address access list. | ||||
| CsnBgp4RouteMapMatchNextHopAccessList | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.15 | OCTET STRING (SIZE (0..10)) | RW | mandatory |
column · OCTET STRING (SIZE (0..10)) · read-write · mandatory A number from 1 to 0xFFFF and there are 5 of 2 OCTETs.
This integer number is represented by 2 OCTETs.
To match a BGP address access list. | ||||
| CsnBgp4RouteMapMatchNextHopPrefixList | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.16 | OCTET STRING (SIZE (0..170)) | RW | mandatory |
column · OCTET STRING (SIZE (0..170)) · read-write · mandatory Prefix list To match a BGP address access list. | ||||
| NsnBgp4RouteMapSet | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14 | |||
| TsnBgp4RouteMapSetTable | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1 | NA | mandatory | |
table · not-accessible · mandatory Bgp4 Route Map Set table. | ||||
| RsnBgp4RouteMapSetEntry | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1 | NA | mandatory | |
row · not-accessible · mandatory An entry in the Bgp4 Route Map Set table. | ||||
| CsnBgp4RouteMapSetMapName | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.1 | OCTET STRING (SIZE (0..32)) | RO | mandatory |
column · OCTET STRING (SIZE (0..32)) · read-only · mandatory An octet string of the route-map name, each character of the name is represented by one octet. | ||||
| CsnBgp4RouteMapSetSequenceNum | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory A sequence number for this particular route-map. | ||||
| CsnBgp4RouteMapSetAsPathType | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.3 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory To modify an autonomous system path for BGP routes.
tag(0) - Converts the tag of a route into an autonomous system path.
prepend(1) - Appends the string from snBgp4RouteMapSetAsPathString to the
as-path of the route that is matched by the route map.
| ||||
| CsnBgp4RouteMapSetAsPathString | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.4 | OCTET STRING (SIZE (0..32)) | RW | mandatory |
column · OCTET STRING (SIZE (0..32)) · read-write · mandatory as-path string. This string is used if only if the snBgp4RouteMapSetAsPathCmd was sent together with the value set to prepend(1). | ||||
| CsnBgp4RouteMapSetAutoTag | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.5 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory To enable/disable the automatic-tag for BGP routes.
| ||||
| CsnBgp4RouteMapSetCommunityType | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.6 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory To set the BGP COMMUNITIES attribute. none means no other community attributes are allowed, nums means allowing community attributesi, the old values 1 and 2 are not valid since 5.03.00
| ||||
| CsnBgp4RouteMapSetCommunityNum | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.7 | INTEGER | RW | deprecated |
column · INTEGER · read-write · deprecated community-number. This number is used if only if the snBgp4RouteMapSetCommunityCmd was sent together with the value set to number(0). | ||||
| CsnBgp4RouteMapSetCommunityAdditive | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.8 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory To add the community to the already existing communities.
| ||||
| CsnBgp4RouteMapSetLocalPreference | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.9 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory To modify a local-preference for BGP routes. | ||||
| CsnBgp4RouteMapSetMetric | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.10 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory To modify a metric for BGP routes. | ||||
| CsnBgp4RouteMapSetNextHop | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.11 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory To modify the IP address of the next hop for BGP routes. | ||||
| CsnBgp4RouteMapSetOrigin | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.12 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory To set the BGP origin code.
| ||||
| CsnBgp4RouteMapSetTag | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.13 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory To specify the tag for BGP routes. | ||||
| CsnBgp4RouteMapSetWeight | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.14 | INTEGER (0..65535) | RW | mandatory |
column · INTEGER (0..65535) · read-write · mandatory To specify the BGP weight for the routing table. | ||||
| CsnBgp4RouteMapSetRowMask | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.15 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object is used together with above MIBs in the same VARBIND to set and reset any MIBs in the table. The bit number is referred to the snBgp4RouteMapSetEntry number of each row in the table. The bit is ON - means set, The bit is OFF - means reset | ||||
| CsnBgp4RouteMapSetCommunityNums | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.16 | OCTET STRING (SIZE (0..24)) | RW | mandatory |
column · OCTET STRING (SIZE (0..24)) · read-write · mandatory Community number is from 1 to 0xFFFFFFFF. There are 6 of them. This integer number is represented by 4 OCTETs. | ||||
| CsnBgp4RouteMapSetDampenHalfLife | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.17 | INTEGER (1..45) | RW | mandatory |
column · INTEGER (1..45) · read-write · mandatory Bgp4 Route Map Dampening Half Life. | ||||
| CsnBgp4RouteMapSetDampenReuse | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.18 | INTEGER (1..20000) | RW | mandatory |
column · INTEGER (1..20000) · read-write · mandatory Bgp4 Route Map Dampening Reuse. | ||||
| CsnBgp4RouteMapSetDampenSuppress | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.19 | INTEGER (1..20000) | RW | mandatory |
column · INTEGER (1..20000) · read-write · mandatory Bgp4 Route Map Dampening Suppress. | ||||
| CsnBgp4RouteMapSetDampenMaxSuppress | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.20 | INTEGER (1..20000) | RW | mandatory |
column · INTEGER (1..20000) · read-write · mandatory Bgp4 Route Map Dampening Max Suppress Time. | ||||
| NsnBgp4NeighOperStatus | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15 | |||
| TsnBgp4NeighOperStatusTable | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1 | NA | mandatory | |
table · not-accessible · mandatory Bgp4 Neighbor Operational Status table. | ||||
| RsnBgp4NeighOperStatusEntry | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1 | NA | mandatory | |
row · not-accessible · mandatory An entry in the Bgp4 Operational Status table. | ||||
| CsnBgp4NeighOperStatusIndex | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The index for a neighbor entry. | ||||
| CsnBgp4NeighOperStatusIp | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.2 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The IP Address for a neighbor entry. | ||||
| CsnBgp4NeighOperStatusRemoteAs | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory To show a neighbor with an autonomous system number(AS). | ||||
| CsnBgp4NeighOperStatusBgpType | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory To show the type of BGP protocol whether is internal or external.
| ||||
| CsnBgp4NeighOperStatusState | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory To show the state of this neighbor.
| ||||
| CsnBgp4NeighOperStatusKeepAliveTime | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The Keep alive timer. | ||||
| CsnBgp4NeighOperStatusHoldTime | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.7 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The Hold time timer. | ||||
| CsnBgp4NeighOperStatusAdvertlevel | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.8 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory To show the minimum interval between the sending of BGP routing updates. | ||||
| CsnBgp4NeighOperStatusKeepAliveTxCounts | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.9 | Counter | RO | mandatory |
column · Counter · read-only · mandatory Keep alive message sent counts. | ||||
| CsnBgp4NeighOperStatusKeepAliveRxCounts | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.10 | Counter | RO | mandatory |
column · Counter · read-only · mandatory Keep alive message received counts. | ||||
| CsnBgp4NeighOperStatusUpdateTxCounts | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.11 | Counter | RO | mandatory |
column · Counter · read-only · mandatory Update message sent counts. | ||||
| CsnBgp4NeighOperStatusUpdateRxCounts | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.12 | Counter | RO | mandatory |
column · Counter · read-only · mandatory Update message received counts. | ||||
| CsnBgp4NeighOperStatusNotifTxCounts | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.13 | Counter | RO | mandatory |
column · Counter · read-only · mandatory Notification message sent counts. | ||||
| CsnBgp4NeighOperStatusNotifRxCounts | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.14 | Counter | RO | mandatory |
column · Counter · read-only · mandatory Notification message received counts. | ||||
| CsnBgp4NeighOperStatusOpenTxCounts | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.15 | Counter | RO | mandatory |
column · Counter · read-only · mandatory Open message sent counts. | ||||
| CsnBgp4NeighOperStatusOpenRxCounts | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.16 | Counter | RO | mandatory |
column · Counter · read-only · mandatory Open message received counts. | ||||
| NsnBgp4RouteOperStatus | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16 | |||
| TsnBgp4RouteOperStatusTable | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1 | NA | mandatory | |
table · not-accessible · mandatory Bgp4 Routebor Operational Status table. | ||||
| RsnBgp4RouteOperStatusEntry | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1 | NA | mandatory | |
row · not-accessible · mandatory An entry in the Bgp4 Operational Status table. | ||||
| CsnBgp4RouteOperStatusIndex | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The index for a route entry. | ||||
| CsnBgp4RouteOperStatusIp | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.2 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The IP Address for a route entry. | ||||
| CsnBgp4RouteOperStatusSubnetMask | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.3 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The IP Subnet Mask for a route entry. | ||||
| CsnBgp4RouteOperStatusNextHop | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.4 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The next-hop IP for a route entry. | ||||
| CsnBgp4RouteOperStatusMetric | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory To show the metric value of a route entry. | ||||
| CsnBgp4RouteOperStatusLocalPreference | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory To show the local preference of a route entry. | ||||
| CsnBgp4RouteOperStatusWeight | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.7 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory To show the weight of this route. | ||||
| CsnBgp4RouteOperStatusOrigin | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.8 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory To show the origin of this route.
| ||||
| CsnBgp4RouteOperStatusStatus | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.9 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory A bit array that contains the status of this route.
This is a packed bit string; The following shows the
meaning of each bit:
(bit 0 is the least significant bit and 0=FALSE, 1=TRUE).
bit position meaning
------------ -------
6-31 reserved.
5 aggregate.
4 best.
3 internal.
2 local.
1 suppressed.
0 valid. | ||||
| CsnBgp4RouteOperStatusRouteTag | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.10 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory To show the route tag of this route. | ||||
| CsnBgp4RouteOperStatusCommunityList | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.11 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory To show the community list of this route. If the community list is an NULL string that means an empty list, then the community is INTERNET. A number from 1 to 0xFFFFFFFF. This integer number is represented by 4 OCTETs. In the community list, it could have some Well-known numbers such as: BGP_COMMUNITY_ATTRIBUTE_NO_EXPORT 0xFFFFFF01 BGP_COMMUNITY_ATTRIBUTE_NO_ADVERTISE 0xFFFFFF02 | ||||
| CsnBgp4RouteOperStatusAsPathList | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.12 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory To show the AS Path list of this route. A number from 1 to 0xFFFF. This integer number is represented by 2 OCTETs. | ||||
| NsnBgp4NeighborSummary | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.17 | |||
| TsnBgp4NeighborSummaryTable | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1 | NA | mandatory | |
table · not-accessible · mandatory Bgp4 Routebor Operational Status table. | ||||
| RsnBgp4NeighborSummaryEntry | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1 | NA | mandatory | |
row · not-accessible · mandatory An entry in the Bgp4 Operational Status table. | ||||
| CsnBgp4NeighborSummaryIndex | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The index for a route entry. | ||||
| CsnBgp4NeighborSummaryIp | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1.2 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The IP Address for a route entry. | ||||
| CsnBgp4NeighborSummaryState | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory To show the state of this neighbor.
| ||||
| CsnBgp4NeighborSummaryStateChgTime | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The time of a change of the state of this neighbor. | ||||
| CsnBgp4NeighborSummaryRouteReceived | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of routes received of this neighbor. | ||||
| CsnBgp4NeighborSummaryRouteInstalled | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of routes installed of this neighbor. | ||||
| NsnBgp4Attribute | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18 | |||
| TsnBgp4AttributeTable | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1 | NA | mandatory | |
table · not-accessible · mandatory Bgp4 Attribute entries table. | ||||
| RsnBgp4AttributeEntry | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1 | NA | mandatory | |
| CsnBgp4AttributeIndex | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The index for a route entry. | ||||
| CsnBgp4AttributeNextHop | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.2 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The next-hop IP for a route entry. | ||||
| CsnBgp4AttributeMetric | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory To show the metric value of a route entry. | ||||
| CsnBgp4AttributeOrigin | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory To show the origin of this route.
| ||||
| CsnBgp4AttributeAggregatorAs | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The aggregator AS number for an attribute entry. | ||||
| CsnBgp4AttributeRouterId | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.6 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The router ID for an attribute entry. | ||||
| CsnBgp4AttributeAtomicAggregatePresent | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.7 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The atomic aggregate present in an attribute entry.
| ||||
| CsnBgp4AttributeLocalPreference | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.8 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory To show the local preference of a route entry. | ||||
| CsnBgp4AttributeCommunityList | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.9 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory To show the community list of this attribute entry. If the community list is an NULL string that means an empty list, then the community is INTERNET. A number from 1 to 0xFFFFFFFF. This integer number is represented by 4 OCTETs. In the community list, it could have some Well-known numbers such as: BGP_COMMUNITY_ATTRIBUTE_NO_EXPORT 0xFFFFFF01 BGP_COMMUNITY_ATTRIBUTE_NO_ADVERTISE 0xFFFFFF02 | ||||
| CsnBgp4AttributeAsPathList | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.10 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory To show the AS Path list of this attribute entry. A number from 1 to 0xFFFF. This integer number is represented by 2 OCTETs. | ||||
| CsnBgp4AttributeOriginator | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.11 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The originator IP address for an attribute entry. | ||||
| CsnBgp4AttributeClusterList | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.12 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory To show the cluster list of this attribute entry. If the cluster list is an NULL string, it means an empty list. Otherwise, the list is a group of cluster ID which is represented by 4 OCTETs IP address. | ||||
| NsnBgp4ClearNeighborCmd | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.19 | |||
| TsnBgp4ClearNeighborCmdTable | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.19.1 | NA | mandatory | |
table · not-accessible · mandatory Clear Bgp4 command table. | ||||
| RsnBgp4ClearNeighborCmdEntry | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.19.1.1 | NA | mandatory | |
row · not-accessible · mandatory An entry in the clear Bgp4 neighbor command table. | ||||
| CsnBgp4ClearNeighborCmdIp | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.19.1.1.1 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The IP Address for a neighbor entry. If the IP address is 255.255.255.255, it means for all neighbors. | ||||
| CsnBgp4ClearNeighborCmdElement | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.19.1.1.2 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory To send the command element of this neighbor for value(1) to (5) valid(0) is received in SNMP-get.
| ||||
| NsnBgp4NeighPrefixGroup | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.20 | |||
| TsnBgp4NeighPrefixGroupTable | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.20.1 | NA | mandatory | |
table · not-accessible · mandatory Bgp4 Neighbor Prefix Group table. | ||||
| RsnBgp4NeighPrefixGroupEntry | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.20.1.1 | NA | mandatory | |
row · not-accessible · mandatory An entry in the Bgp4 Prefix Group table. | ||||
| CsnBgp4NeighPrefixGroupNeighIp | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.20.1.1.1 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The IP Address for a neighbor entry. | ||||
| CsnBgp4NeighPrefixGroupDir | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.20.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The incoming/outgoing advertisements to which the access list is applied.
| ||||
| CsnBgp4NeighPrefixGroupInAccessList | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.20.1.1.3 | OCTET STRING (SIZE (0..32)) | RW | mandatory |
column · OCTET STRING (SIZE (0..32)) · read-write · mandatory An in access prefix list name. | ||||
| CsnBgp4NeighPrefixGroupOutAccessList | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.20.1.1.4 | OCTET STRING (SIZE (0..32)) | RW | mandatory |
column · OCTET STRING (SIZE (0..32)) · read-write · mandatory An out prefix list name. | ||||
| CsnBgp4NeighPrefixGroupRowStatus | 1.3.6.1.4.1.11.2.3.7.11.12.2.11.20.1.1.5 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid
| ||||