HP-ICF-PROVIDER-BRIDGE
Hewlett-PackardThis MIB module contains the HP 'version' of the standard Provider Bridge MIB and the proprietary extensions to it.
snmptranslate -m HP-ICF-PROVIDER-BRIDGE -Tpsnmpwalk -v2c -c <community> -m HP-ICF-PROVIDER-BRIDGE <host> 1.3.6.1.4.1.11.2.14.11.5.1.40Imports
| HP-ICF-OID | hpSwitch |
|---|---|
| IF-MIB | ifIndex |
| Q-BRIDGE-MIB | dot1qVlanStaticEntry |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IhpicfProviderBridge | 1.3.6.1.4.1.11.2.14.11.5.1.40 | |||
identity This MIB module contains the HP 'version' of the standard Provider Bridge MIB and the proprietary extensions to it. | ||||
| NhpicfProviderBridgeObjects | 1.3.6.1.4.1.11.2.14.11.5.1.40.1 | |||
| NhpicfProviderBridgeBase | 1.3.6.1.4.1.11.2.14.11.5.1.40.1.1 | |||
| ShpicfProviderBridgeType | 1.3.6.1.4.1.11.2.14.11.5.1.40.1.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current hpicfProviderBridgeType controls bridge mode configuration.
A device can function in one of the 4 modes defined above.
vlanBridge - provider bridge feature disabled mode,
all vlans are cvlans.
svlanBridge - provider bridge mode with only svlans.
providerEdgeBridge - provider bridge mode with cvlans and
svlans and mappings between them.
vlanSvlanBridge - provider bridge mode with independent
cvlans and svlans on the same device.
Changing from one mode to another will empty out the
current configuration information and reboot the device.
| ||||
| ShpicfProviderBridgeEtherType | 1.3.6.1.4.1.11.2.14.11.5.1.40.1.1.2 | Integer32 (1536..65535) | RW | |
scalar · Integer32 (1536..65535) · read-write · current Defines the 2-byte ethertype for provider tagged frames.
The default is 0x88a8.
Changing from one tag-type to another with a given
hpicfProviderBridgeType configuration will save current
configurations and reboot the device, the new tag-type
will take effect subsequently. | ||||
| ThpicfProviderBridgeVlanTypeTable | 1.3.6.1.4.1.11.2.14.11.5.1.40.1.1.3 | NA | ||
table · not-accessible · current HP proprietaty extension to dot1qVlanStaticTable to classify a vlan as a cvlan or an svlan | ||||
| RhpicfProviderBridgeVlanTypeEntry | 1.3.6.1.4.1.11.2.14.11.5.1.40.1.1.3.1 | NA | ||
| ChpicfProviderBridgeVlanType | 1.3.6.1.4.1.11.2.14.11.5.1.40.1.1.3.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates the vlantype.
| ||||
| ThpicfProviderBridgePortTable | 1.3.6.1.4.1.11.2.14.11.5.1.40.1.1.4 | NA | ||
table · not-accessible · current This specifies the designated type of an externally accessible port on a Provider Bridge. | ||||
| RhpicfProviderBridgePortEntry | 1.3.6.1.4.1.11.2.14.11.5.1.40.1.1.4.1 | NA | ||
row · not-accessible · current An entry that specifies the designated type of an externally accessible port on a Provider Bridge.
| ||||
| ChpicfProviderBridgePortType | 1.3.6.1.4.1.11.2.14.11.5.1.40.1.1.4.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The type of an externally accessible port on a Provider Bridge. A customer-edge port is a C-VLAN component Port on a Provider Edge Bridge that is connected to customer owned equipment and receives and transmits frames for a single customer. Designating a port as a Customer Edge Port implies Provider Edge Bridge functionality and, specifically, the existence of a C-VLAN component associated with that port. This C-VLAN component is uniquely identified within the Bridge by the port number of the associated Customer Edge Port. A customer-network port is an S-VLAN component Port on a Provider Bridge or within a Provider Edge Bridge that receives and transmits frame for a single customer. A provider-network port is an S-VLAN component Port on a Provider Bridge that can transmit and receive frames for multiple customers.
| ||||
| NhpicfProviderBridgeConformance | 1.3.6.1.4.1.11.2.14.11.5.1.40.2 | |||
| NhpicfProviderBridgeGroups | 1.3.6.1.4.1.11.2.14.11.5.1.40.2.1 | |||
| GhpicfProviderBridgeBaseGroup | 1.3.6.1.4.1.11.2.14.11.5.1.40.2.1.1 | |||
group · current Basic Provider Bridge configuration information. | ||||
| NhpicfProviderBridgeCompliances | 1.3.6.1.4.1.11.2.14.11.5.1.40.2.2 | |||
| MhpicfProviderBridgeCompliance | 1.3.6.1.4.1.11.2.14.11.5.1.40.2.2.1 | |||
compliance · current The compliance statement for HP Switches with IEEE standard Provider Bridge MIBs.
| ||||