HP-ICF-POE-MIB
Hewlett-PackardThis MIB module describes management objects that manage Power Source Equipment (PSE).
snmptranslate -m HP-ICF-POE-MIB -Tpsnmpwalk -v2c -c <community> -m HP-ICF-POE-MIB <host> 1.3.6.1.4.1.11.2.14.11.1.9.1Imports
| ENTITY-MIB | entPhysicalIndex |
|---|---|
| HP-ICF-OID | hpicfCommon |
| POWER-ETHERNET-MIB | pethMainPseEntry, pethPsePortEntry |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NhpicfPOE | 1.3.6.1.4.1.11.2.14.11.1.9 | ||||||||||||
| IhpicfPoe | 1.3.6.1.4.1.11.2.14.11.1.9.1 | ||||||||||||
identity This MIB module describes management objects that manage Power Source Equipment (PSE). | |||||||||||||
| ThpicfPoePethPsePortTable | 1.3.6.1.4.1.11.2.14.11.1.9.1.1 | NA | |||||||||||
table · not-accessible · current This table supplements the table 'pethPsePortTable' in ieee802af.mib. | |||||||||||||
| RhpicfPoePethPsePortEntry | 1.3.6.1.4.1.11.2.14.11.1.9.1.1.1 | NA | |||||||||||
row · not-accessible · current The fields in these entries will be used to supplement fields in 'pethPsePortEntry in ieee802af.mib.
| |||||||||||||
| ChpicfPoePethPsePortCurrent | 1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.1 | Integer32 (0..65535) | RO | ||||||||||
column · Integer32 (0..65535) · read-only · current This field specifies the current supplied at this port. This value is specified in milli amperes(mA). | |||||||||||||
| ChpicfPoePethPsePortVoltage | 1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.2 | Integer32 (0..65535) | RO | ||||||||||
column · Integer32 (0..65535) · read-only · current This field specifies the Voltage supplied at this port. This value is specified in 10's of volts (dV) | |||||||||||||
| ChpicfPoePethPsePortPower | 1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.3 | Integer32 (0..65535) | RO | ||||||||||
column · Integer32 (0..65535) · read-only · current This field specifies the Power supplied at this port. This value is specified in milliwatts (mW). | |||||||||||||
| ChpicfPoePethPsePortPowerAllocateBy | 1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This field specifies the power allocation method for this port. The default value is usage.
| |||||||||||||
| ChpicfPoePethPsePortPowerValue | 1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.5 | Integer32 (0..17) | RW | ||||||||||
column · Integer32 (0..17) · read-write · current This field specifies the power allocation defined for this port. This value is specified in Watts (W). | |||||||||||||
| ChpicfPoePethPsePortLLDPDetect | 1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This field specifies if power should be allocated using LLDP advertised information regarding the PD.
| |||||||||||||
| ChpicfPoePethPsePortPoePlusPowerValue | 1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.7 | Integer32 (0..255) | RW | ||||||||||
column · Integer32 (0..255) · read-write · current This field specifies the power allocation defined for this port. Use this object for equipment supporting high power, that is greater than 15 Watts. This value is specified in Watts (W). This object may only be read or written when hpicfPoePethPsePortPowerAllocateBy is set to value(3). For 2540, 2930F, 2930M, 3810 and 5400R platforms the default value is 15 Watts and for other platforms the default value is 17 Watts.
| |||||||||||||
| ChpicfPoePethPsePortActualPower | 1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.8 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This field specifies the actual power drained by the device connected to this port.
| |||||||||||||
| ChpicfPoePethPsePortOperStatus | 1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.9 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This field specifies the operational status of the port
| |||||||||||||
| ChpicfPoePethPsePortPowerMode | 1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.10 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This field specifies the power mode of the port whether enabled or disabled or disableWithFiber
| |||||||||||||
| ChpicfPoePethPsePortAveragePower | 1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.11 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This field specifies the average power supplied to this port which is used by the device connected to it.
| |||||||||||||
| ChpicfPoePethPsePortPeakPower | 1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.12 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This field specifies the peak power supplied to this port which is used by the device connected to it.
| |||||||||||||
| ChpicfPoePethPsePortPreStdDetect | 1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.13 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This field specifies the pre standard detect status for this port. A value of On - indicates that power pre-802.3af-standard devices. A value of Off - indicates that only pre-802.3af/at compliant devices are allowed. The default value is Off.
| |||||||||||||
| ChpicfPoePethPsePortLowPriority | 1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.14 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates whether a particular port shuts down in the event of any PSU failure in the system. A value of (1) indicates a low priority port which shuts down in the event of any PSU failure. A value of (2) indicates a high priority port which is unaffected by the failure of any single PSU. The default value is high.
| |||||||||||||
| ChpicfPoePethPsePortResetState | 1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.15 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object is used to reset the PoE controller HW to which the port is associated.
| |||||||||||||
| ChpicfPoePethPsePortPowerType | 1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.16 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This field specifies the PD type determined during physical layer classification. The default value is -1.
| |||||||||||||
| ChpicfPoePethPsePortForceTwoPairMode | 1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.17 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This field specifies the force two pair mode status for this port.This applies only on devices that support 4 pair POE. A value of On - indicates that force two pair mode has been enabled for this port. A value of Off - indicates that force two pair mode has been disabled for this port. The default value is Off.
| |||||||||||||
| NhpicfPoeConformance | 1.3.6.1.4.1.11.2.14.11.1.9.1.2 | ||||||||||||
| NhpicfPoeCompliances | 1.3.6.1.4.1.11.2.14.11.1.9.1.2.1 | ||||||||||||
| MhpicfPoeCompliance | 1.3.6.1.4.1.11.2.14.11.1.9.1.2.1.1 | deprecated | |||||||||||
compliance · deprecated A compliance statement for HP Routing switches with PoE capability | |||||||||||||
| MhpicfPoeCompliance1 | 1.3.6.1.4.1.11.2.14.11.1.9.1.2.1.2 | deprecated | |||||||||||
compliance · deprecated A compliance statement for HP Routing switches with PoE capability | |||||||||||||
| MhpicfPoeCompliance2 | 1.3.6.1.4.1.11.2.14.11.1.9.1.2.1.3 | deprecated | |||||||||||
compliance · deprecated A compliance statement for HP Routing switches with PoE capability | |||||||||||||
| MhpicfPoeCompliance3 | 1.3.6.1.4.1.11.2.14.11.1.9.1.2.1.4 | deprecated | |||||||||||
compliance · deprecated A compliance statement for HP Routing switches with PoE capability | |||||||||||||
| MhpicfPoeCompliance4 | 1.3.6.1.4.1.11.2.14.11.1.9.1.2.1.5 | deprecated | |||||||||||
compliance · deprecated A compliance statement for HP Routing switches with PoE capability
| |||||||||||||
| MhpicfPoeCompliance5 | 1.3.6.1.4.1.11.2.14.11.1.9.1.2.1.6 | ||||||||||||
compliance · current A compliance statement for HP Routing switches with PoE capability | |||||||||||||
| MhpicfPoeCompliance6 | 1.3.6.1.4.1.11.2.14.11.1.9.1.2.1.7 | ||||||||||||
compliance · current A compliance statement for HP Routing switches with PoE capability | |||||||||||||
| MhpicfPoeCompliance7 | 1.3.6.1.4.1.11.2.14.11.1.9.1.2.1.8 | deprecated | |||||||||||
compliance · deprecated A compliance statement for HP Routing switches with PoE capability | |||||||||||||
| MhpicfPoeCompliance8 | 1.3.6.1.4.1.11.2.14.11.1.9.1.2.1.9 | deprecated | |||||||||||
compliance · deprecated A compliance statement for HP Routing switches with PoE capability
| |||||||||||||
| MhpicfPoeCompliance9 | 1.3.6.1.4.1.11.2.14.11.1.9.1.2.1.10 | ||||||||||||
compliance · current A compliance statement for HP Routing switches with PoE capability
| |||||||||||||
| MhpicfPoeCompliance10 | 1.3.6.1.4.1.11.2.14.11.1.9.1.2.1.11 | ||||||||||||
compliance · current A compliance statement for HP Routing switches with PoE capability
| |||||||||||||
| NhpicfPoeGroups | 1.3.6.1.4.1.11.2.14.11.1.9.1.2.2 | ||||||||||||
| GhpicfPoePethPsePortTableGroup | 1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.1 | ||||||||||||
group · current A collection of objects allowing configuration of PoE PSE Port table
| |||||||||||||
| GhpicfPoeGlobalGroup | 1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.2 | deprecated | |||||||||||
group · deprecated A collection of objects related to the global configuration of POE on a given chassis. | |||||||||||||
| GhpicfPseFeaturesGroup | 1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.3 | deprecated | |||||||||||
group · deprecated A Collection of Object(s) that provide information about each power source equipment instance. | |||||||||||||
| GhpicfPoePowerSupplyGroup | 1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.4 | ||||||||||||
group · current A collection of objects related to Power Supply. | |||||||||||||
| GhpicfPoePethPseOperStateTableGroup | 1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.5 | deprecated | |||||||||||
group · deprecated A collection of objects related to Power Supply. | |||||||||||||
| GhpicfPoePethPsePowerTableGroup | 1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.6 | ||||||||||||
group · current A collection of objects related to Power Usage parameters. | |||||||||||||
| GhpicfPoePowerUsageGlobalGroup | 1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.7 | ||||||||||||
group · current A collection of objects related to Power Usage parameters Globally. | |||||||||||||
| GhpicfPseParamsGroup | 1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.8 | deprecated | |||||||||||
group · deprecated A Collection of Object(s) that provide information about each power source equipment instance. | |||||||||||||
| GhpicfPoePethPsePortPreStdDetectGroup | 1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.9 | ||||||||||||
group · current A collection of objects related to port pre std detect status. | |||||||||||||
| GhpicfPoeAuxPowerSupplyGroup | 1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.10 | ||||||||||||
group · current A collection of objects providing information about auxiliary power supply. | |||||||||||||
| GhpicfPoeLowPowerPortGroup | 1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.11 | ||||||||||||
group · current A collection of objects providing information about low priority ports. | |||||||||||||
| GhpicfPseParamsGroup1 | 1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.12 | ||||||||||||
group · current A Collection of Object(s) that provide information about each power source equipment instance. | |||||||||||||
| GhpicfPoePethPsePortPowerGroup | 1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.13 | ||||||||||||
group · current A collection of objects providing information about port power type.
| |||||||||||||
| GhpicfPoePethPseOperStateTableGroup1 | 1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.14 | ||||||||||||
group · current A collection of objects related to Power Supply. | |||||||||||||
| GhpicfPoePethPseFourPairPortTableGroup | 1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.15 | ||||||||||||
group · current A collection of Object(s) related to 4ppoe parameters. | |||||||||||||
| GhpicfPoePethPsePortForceTwoPairModeGroup | 1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.16 | ||||||||||||
group · current A collection of objects related to force two pair mode status. | |||||||||||||
| ShpicfPoeAllowPreStdDetect | 1.3.6.1.4.1.11.2.14.11.1.9.1.3 | TruthValue | RW | deprecated | |||||||||
scalar · TruthValue · read-write · deprecated This object is used to configure the default POE power detection mode. A value of TRUE - indicates that power pre-802.3af-standard devices. A value of FALSE - indicates that only pre-802.3af compliant devices are allowed. The default value is true. In a stack, this value pertains only to the commander switch. | |||||||||||||
| ShpicfPoePowerRedundancy | 1.3.6.1.4.1.11.2.14.11.1.9.1.4 | INTEGER | RW | deprecated | |||||||||
scalar · INTEGER · read-write · deprecated This object is used to configure the POE power redundancy mode. A value of none(1) - means that all available power can be allocated to powered devices. A value of nPlus1(2) - means that one of the highest power supplies is held in reserve and that in the event of a single power supply failure, no no powered devices will be shut down. A value of full(3) - means that half of the available power supplies are held in reserve. The default value is none(1). In a stack, this value pertains only to the commander switch.
| |||||||||||||
| ShpicfPoeExtPwrSupplyCount | 1.3.6.1.4.1.11.2.14.11.1.9.1.5 | Integer32 (1..2147483647) | RW | deprecated | |||||||||
scalar · Integer32 (1..2147483647) · read-write · deprecated This object is used to configure the number of external power supplies expected to be connected to the chassis. The default value is 1. In a stack, this value pertains only to the commander switch. | |||||||||||||
| ThpicfPseFeaturesTable | 1.3.6.1.4.1.11.2.14.11.1.9.1.6 | NA | |||||||||||
table · not-accessible · current This table describes the features of each power source equipment (PSE). On standalone switches (both stackable and chassis switches) there shall be only one entry in this table. In a stack, there shall be one entry for each stack member. | |||||||||||||
| RhpicfPseFeaturesEntry | 1.3.6.1.4.1.11.2.14.11.1.9.1.6.1 | NA | |||||||||||
row · not-accessible · current A row in the PSE features table, signifying a single power source equipment.
| |||||||||||||
| ChpicfPseAllowPreStdDetect | 1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.1 | TruthValue | RW | deprecated | 1 | ||||||||
column · TruthValue · read-write · deprecated This object is used to configure the default POE power detection mode for this power source equipment. A value of TRUE - indicates that power pre-802.3af-standard devices. A value of FALSE - indicates that only pre-802.3af compliant devices are allowed. The default value is true. Example values from LibreNMS test devices
| |||||||||||||
| ChpicfPsePowerRedundancy | 1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.2 | INTEGER | RW | none(1) | |||||||||
column · INTEGER · read-write · current This object is used to configure the POE power redundancy mode for this power source equipment. A value of none(1) - means that all available power can be allocated to powered devices. A value of nPlus1(2) - means that one of the highest power supplies is held in reserve and that in the event of a single power supply failure, no powered devices will be shut down. A value of full(3) - means that half of the available power supplies are held in reserve. The default value is none(1).
Example values from LibreNMS test devices
| |||||||||||||
| ChpicfPseExtPwrSupplyCount | 1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.3 | Integer32 (1..2147483647) | RW | ||||||||||
column · Integer32 (1..2147483647) · read-write · current This object is used to configure the number of external power supplies expected to be connected to the Power Source Equipment. The default value is 1. | |||||||||||||
| ChpicfPseAvailablePower | 1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.4 | Integer32 (0..2147483647) | RO | 1440 | |||||||||
column · Integer32 (0..2147483647) · read-only · current This field specifies the total power available on this Power source equipment. This includes internal and external power supplies.
Example values from LibreNMS test devices
| |||||||||||||
| ChpicfPseUsedPower | 1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.5 | Integer32 (0..2147483647) | RO | 96 | |||||||||
column · Integer32 (0..2147483647) · read-only · current This field specifies the total power allocated on the Power Source Equipment. This is the sum of the power allocated to all the ports on the PSE.
Example values from LibreNMS test devices
| |||||||||||||
| ChpicfPseFailoverPower | 1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.6 | Integer32 (0..2147483647) | RO | 740 | |||||||||
column · Integer32 (0..2147483647) · read-only · current This field specifies the failover power for this Power Source Equipment.
Example values from LibreNMS test devices
| |||||||||||||
| ChpicfPseRedundantPower | 1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.7 | Integer32 (0..2147483647) | RO | 0 | |||||||||
column · Integer32 (0..2147483647) · read-only · current This field specifies the redundancy POE power available to the Power Source Equipment.
Example values from LibreNMS test devices
| |||||||||||||
| ChpicfPseCurrentPowerDraw | 1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.8 | Integer32 (0..2147483647) | RO | 94 | |||||||||
column · Integer32 (0..2147483647) · read-only · current This field specifies the redundancy POE power available to the Power Source Equipment.
Example values from LibreNMS test devices
| |||||||||||||
| ThpicfPoePowerSupplyTable | 1.3.6.1.4.1.11.2.14.11.1.9.1.7 | NA | |||||||||||
table · not-accessible · current This table contains one row per power supply available to the switch. | |||||||||||||
| RhpicfPoePowerSupplyEntry | 1.3.6.1.4.1.11.2.14.11.1.9.1.7.1 | NA | |||||||||||
row · not-accessible · current Information about a particular power supply. Each entry provides information about power supply whether it is external or internal, if it is poe/poePlus and the capacity of the power supply.
| |||||||||||||
| ChpicfPoePowerSupplySourceType | 1.3.6.1.4.1.11.2.14.11.1.9.1.7.1.1 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This field specifies whether the power supply is external or internal. Stackable switch has inbuilt power supply and can have upto 1 external power supply. Chassis switch can have upto 2 internal power supplies for 6 slot and upto 4 for 12 slot. Chassis switch can have upto 2 external power supplies.
| |||||||||||||
| ChpicfPoePowerSupplyType | 1.3.6.1.4.1.11.2.14.11.1.9.1.7.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This field specifies the type of the power supply, poe or poePlus.
| |||||||||||||
| ChpicfPoePowerSupplyCapacity | 1.3.6.1.4.1.11.2.14.11.1.9.1.7.1.3 | Integer32 (0..2147483647) | RO | ||||||||||
column · Integer32 (0..2147483647) · read-only · current This field specifies the capacity of the power supply.
| |||||||||||||
| ChpicfPoePowerSupplyAuxCapacity | 1.3.6.1.4.1.11.2.14.11.1.9.1.7.1.4 | Integer32 (0..10000) | RO | ||||||||||
column · Integer32 (0..10000) · read-only · current This MIB object specifies the capacity of the auxiliary power supply. The power supplies other than the model J9830A returns the value NULL.
| |||||||||||||
| ThpicfPoePethPseOperStateTable | 1.3.6.1.4.1.11.2.14.11.1.9.1.8 | NA | |||||||||||
table · not-accessible · current This table supplements the table 'pethPsePortTable' in ieee802af.mib. | |||||||||||||
| RhpicfPoePethPseOperStateEntry | 1.3.6.1.4.1.11.2.14.11.1.9.1.8.1 | NA | |||||||||||
row · not-accessible · current The fields in these entries will be used to supplement fields in 'pethPsePortEntry in ieee802af.mib.
| |||||||||||||
| ChpicfPoePethPseOperState | 1.3.6.1.4.1.11.2.14.11.1.9.1.8.1.1 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This field specifies the operation status. The default value is on.
| |||||||||||||
| ChpicfPoePethPsePortNum | 1.3.6.1.4.1.11.2.14.11.1.9.1.8.1.2 | Integer32 (0..65535) | RO | ||||||||||
column · Integer32 (0..65535) · read-only · current This field specifies the port number. | |||||||||||||
| ChpicfPoePethMainPsePdPowerDraw | 1.3.6.1.4.1.11.2.14.11.1.9.1.8.1.3 | Integer32 (0..2147483647) | RO | ||||||||||
column · Integer32 (0..2147483647) · read-only · current This field specifies the total actual power that is used by all the ports on this slot or member.
| |||||||||||||
| ShpicfPoeMaxGuaranteedPower | 1.3.6.1.4.1.11.2.14.11.1.9.1.9 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current This field specifies the guaranteed maximum PoE power, namely, the maximum power supplied to critical PSEs
| |||||||||||||
| ShpicfPoeRemainingGuaranteedPower | 1.3.6.1.4.1.11.2.14.11.1.9.1.10 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current This field specifies the Remaining Guaranteed power. This is difference of Guaranteed Maximum PoE Power and the sum of maximum power of critical PSEs
| |||||||||||||
| ThpicfPoePethPsePowerTable | 1.3.6.1.4.1.11.2.14.11.1.9.1.11 | NA | |||||||||||
table · not-accessible · current This table supplements the table 'pethPsePortTable' in ieee802af.mib. | |||||||||||||
| RhpicfPoePethPsePowerEntry | 1.3.6.1.4.1.11.2.14.11.1.9.1.11.1 | NA | |||||||||||
row · not-accessible · current The fields in these entries will be used to supplement fields in pethPsePortEntry in ieee802af.mib.
| |||||||||||||
| ChpicfPoePethPsePeakPower | 1.3.6.1.4.1.11.2.14.11.1.9.1.11.1.1 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This field specifies the peak power of the PSE.
| |||||||||||||
| ChpicfPoePethPseAvgPower | 1.3.6.1.4.1.11.2.14.11.1.9.1.11.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This field specifies the average power of the PSE.
| |||||||||||||
| ChpicfPoePethPseRemGrntPower | 1.3.6.1.4.1.11.2.14.11.1.9.1.11.1.3 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Guaranteed remaining power of PSEs
| |||||||||||||
| ThpicfPoePethPseFourPairPortTable | 1.3.6.1.4.1.11.2.14.11.1.9.1.12 | NA | |||||||||||
table · not-accessible · current This table supplements the table 'pethPsePortTable' in ieee802af.mib. | |||||||||||||
| RhpicfPoePethPseFourPairPortEntry | 1.3.6.1.4.1.11.2.14.11.1.9.1.12.1 | NA | |||||||||||
row · not-accessible · current The fields in these entries will be used to supplement fields in 'pethPsePortEntry in ieee802af.mib.
| |||||||||||||
| ChpicfpethPsePortPDSignature | 1.3.6.1.4.1.11.2.14.11.1.9.1.12.1.1 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This Signature value represents the PD signature. This variable is valid only while a PD is detected. The meaning of the signature labels is defined in the IEEE specification.
| |||||||||||||
| ChpicfpethPsePortDetectionStatusA | 1.3.6.1.4.1.11.2.14.11.1.9.1.12.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Describes the operational status of the port PD detection. A value of deliveringPowerAltA - indicates that the PSE State diagram is in the state POWER_ON_PRI if alt_pri='a', or the state POWER_ON_SEC if alt_pri='b'. A value of faultAltA - indicates that the PSE State diagram is in the state IDLE_PRI if alt_pri='a', or the state IDLE_SEC if alt_pri='b' due to the variable error_condition_pri = TRUE (if alt_pri='a') or error_condition_sec = TRUE (if alt_pri='b'). A value of searchingAltA - indicates the PSE State diagram is in a state other than those listed above.
| |||||||||||||
| ChpicfpethPsePortDetectionStatusB | 1.3.6.1.4.1.11.2.14.11.1.9.1.12.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Describes the operational status of the port PD detection. A value of deliveringPowerAltB - indicates that the PSE State diagram is in the state POWER_ON_SEC if alt_pri='a', or the state POWER_ON_PRI if alt_pri='b'. A value of faultAltB - indicates that the PSE State diagram is in the state IDLE_SEC if alt_pri='a', or the state IDLE_PRI if alt_pri='b' due to the variable error_condition_sec = TRUE (if alt_pri='a') or error_condition_pri = TRUE (if alt_pri='b'). A value of searchingAltB - indicates the PSE State diagram is in a state other than those listed above.
| |||||||||||||
| ChpicfpethPsePortPowerClassificationA | 1.3.6.1.4.1.11.2.14.11.1.9.1.12.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Classification is a way to tag different terminals on the Power over LAN network according to their power consumption. Devices such as IP telephones, WLAN access points and others, will be classified according to their power requirements. The meaning of the classification labels is defined in the IEEE specification. This variable is valid only while a PD is being powered, that is, while the attribute pethPsePortDetectionStatusA is reporting the enumeration deliveringPowerAltA.
| |||||||||||||
| ChpicfpethPsePortPowerClassificationB | 1.3.6.1.4.1.11.2.14.11.1.9.1.12.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Classification is a way to tag different terminals on the Power over LAN network according to their power consumption. Devices such as IP telephones, WLAN access points and others, will be classified according to their power requirements. The meaning of the classification labels is defined in the IEEE specification. This variable is valid only while a PD is being powered, that is, while the attribute pethPsePortDetectionStatusB is reporting the enumeration deliveringPowerAltB.
| |||||||||||||
| ChpicfpethPsePortAssignedClass | 1.3.6.1.4.1.11.2.14.11.1.9.1.12.1.6 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Classification is a way to tag different terminals on the Power over LAN network according to their power consumption. Devices such as IP telephones, WLAN access points and others, will be classified according to their power requirements. The meaning of the classification labels is defined in the IEEE specification. This variable is valid only while a PD is being powered, that is, while the attribute pethPsePortDetectionStatusB is reporting the enumeration deliveringPowerAltB.
| |||||||||||||
| ChpicfpethPsePortPLCClass | 1.3.6.1.4.1.11.2.14.11.1.9.1.12.1.7 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Classification is a way to tag different terminals on the Power over LAN network according to their power consumption. Devices such as IP telephones, WLAN access points and others, will be classified according to their power requirements. The meaning of the classification labels is defined in the IEEE specification. This variable is valid only while a PD is being powered, that is, while the attribute pethPsePortDetectionStatusB is reporting the enumeration deliveringPowerAltB.
| |||||||||||||
| ChpicfpethPsePortPLCClassA | 1.3.6.1.4.1.11.2.14.11.1.9.1.12.1.8 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Classification is a way to tag different terminals on the Power over LAN network according to their power consumption. Devices such as IP telephones, WLAN access points and others, will be classified according to their power requirements. The meaning of the classification labels is defined in the IEEE specification. This variable is valid only while a PD is being powered, that is, while the attribute pethPsePortDetectionStatusB is reporting the enumeration deliveringPowerAltB.
| |||||||||||||
| ChpicfpethPsePortPLCClassB | 1.3.6.1.4.1.11.2.14.11.1.9.1.12.1.9 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Classification is a way to tag different terminals on the Power over LAN network according to their power consumption. Devices such as IP telephones, WLAN access points and others, will be classified according to their power requirements. The meaning of the classification labels is defined in the IEEE specification. This variable is valid only while a PD is being powered, that is, while the attribute pethPsePortDetectionStatusB is reporting the enumeration deliveringPowerAltB.
| |||||||||||||
Groups and compliance
- hpicfPoeAuxPowerSupplyGroup
- hpicfPoeCompliance
- hpicfPoeCompliance1
- hpicfPoeCompliance10
- hpicfPoeCompliance2
- hpicfPoeCompliance3
- hpicfPoeCompliance4
- hpicfPoeCompliance5
- hpicfPoeCompliance6
- hpicfPoeCompliance7
- hpicfPoeCompliance8
- hpicfPoeCompliance9
- hpicfPoeGlobalGroup
- hpicfPoeLowPowerPortGroup
- hpicfPoePethPseFourPairPortTableGroup
- hpicfPoePethPseOperStateTableGroup
- hpicfPoePethPseOperStateTableGroup1
- hpicfPoePethPsePortForceTwoPairModeGroup
- hpicfPoePethPsePortPowerGroup
- hpicfPoePethPsePortPreStdDetectGroup
- hpicfPoePethPsePortTableGroup
- hpicfPoePethPsePowerTableGroup
- hpicfPoePowerSupplyGroup
- hpicfPoePowerUsageGlobalGroup
- hpicfPseFeaturesGroup
- hpicfPseParamsGroup
- hpicfPseParamsGroup1