HP-ICF-OSPF
Hewlett-PackardThis MIB module contains HP proprietary extensions to the OSPF-MIB module.
snmptranslate -m HP-ICF-OSPF -Tpsnmpwalk -v2c -c <community> -m HP-ICF-OSPF <host> 1.3.6.1.4.1.11.2.14.11.5.1.14Imports
| HP-ICF-OID | hpSwitch |
|---|---|
| IANA-RTPROTO-MIB | IANAipRouteProtocol |
| IF-MIB | InterfaceIndex |
| OSPF-MIB | AreaID, BigMetric, Metric, PositiveInteger, ospfAddressLessIf, ospfAreaAggregateEntry, ospfExtLsdbEntry, ospfIfEntry, ospfIfIpAddress, ospfIfMetricEntry, ospfLsdbAreaId, ospfLsdbEntry, ospfLsdbLsid, ospfLsdbRouterId, ospfLsdbType, ospfNbrEntry |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IhpicfOspf | 1.3.6.1.4.1.11.2.14.11.5.1.14 | |||
identity This MIB module contains HP proprietary extensions to the OSPF-MIB module. | ||||
| NhpicfOspfObjects | 1.3.6.1.4.1.11.2.14.11.5.1.14.1 | |||
| NhpicfOspfGeneral | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.1 | |||
| ShpicfOspf1583CompatibilityMode | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.1.1 | TruthValue | RW | |
scalar · TruthValue · read-write · current Controls the preference rules used when choosing among multiple AS-external-LSAs advertising the same destination. When set to 'true', the preference rules remain those specified in RFC 1583. When set to 'false', the preference rules are those stated in RFC 2328, which prevent routing loops when AS-external-LSAs for the same destination have been originated from different areas. Set to 'true' by default. In order to minimize the chance of routing loops, all OSPF routers in an OSPF routing domain should have this object set identically. When there are routers present that have not been updated with the functionality specified in RFC 2328, all routers should have this object set to 'true'. Otherwise, all routers should have this object set to 'false', preventing all routing loops. | ||||
| ShpicfOspfDefaultImportMetric | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.1.2 | BigMetric | RW | |
scalar · BigMetric · read-write · current The default metric used for advertising external routes imported into OSPF by this router. | ||||
| ShpicfOspfDefaultImportMetricType | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.1.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current The default metric type used for advertising external routes imported into OSPF by this router.
| ||||
| ShpicfOspfIntraAreaDistance | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.1.4 | Integer32 (1..255) | RW | |
scalar · Integer32 (1..255) · read-write · current The default administrative distance to associate with intra-area routes learned by OSPF. Routes with lower distances are preferred. By default, OSPF routes have an administrative distance of 110. Note that the administrative distance settings for OSPF do not affect the choice of routes within OSPF. OSPF will still prefer intra-area routes over inter-area or AS-external routes even if hpicfOspfInterAreaDistance or hpicfOspfExternalDistance is lower than hpicfOspfIntraAreaDistance. The appropriate administrative distance value is applied to the route that OSPF selects as its best route to a destination and is used to decide whether OSPF's route is preferred over a route from some other source. | ||||
| ShpicfOspfInterAreaDistance | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.1.5 | Integer32 (1..255) | RW | |
scalar · Integer32 (1..255) · read-write · current The default administrative distance to associate with inter-area routes learned by OSPF. Routes with lower distances are preferred. By default, OSPF routes have an administrative distance of 110. Note that the administrative distance settings for OSPF do not affect the choice of routes within OSPF. OSPF will still prefer intra-area routes over inter-area routes, even if hpicfOspfInterAreaDistance is lower than hpicfOspfIntraAreaDistance. It will also still prefer inter-area routes over AS-external routes even if hpicfOspfExternalDistance is lower than hpicfOspfInterAreaDistance. The appropriate administrative distance value is applied to the route that OSPF selects as its best route to a destination and is used to decide whether OSPF's route is preferred over a route from some other source. | ||||
| ShpicfOspfExternalDistance | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.1.6 | Integer32 (1..255) | RW | |
scalar · Integer32 (1..255) · read-write · current The default administrative distance to associate with AS-external routes learned by OSPF. Routes with lower distances are preferred. By default, OSPF routes have an administrative distance of 110. Note that the administrative distance settings for OSPF do not affect the choice of routes within OSPF. OSPF will still prefer intra-area routes and inter-area routes over AS-external routes even if hpicfOspfExternalDistance is lower than the hpicfOspfIntraAreaDistance or hpicfOspfInterAreaDistance. The appropriate administrative distance value is applied to the route that OSPF selects as its best route to a destination and is used to decide whether OSPF's route is preferred over a route from some other source. | ||||
| ShpicfOspfSpfThrottleStartInterval | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.1.7 | Integer32 (0..600) | RW | |
scalar · Integer32 (0..600) · read-write · current Initial SPF schedule delay | ||||
| ShpicfOspfSpfThrottleWaitInterval | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.1.8 | Integer32 (0..600) | RW | |
scalar · Integer32 (0..600) · read-write · current Minimum wait time between two consecutive SPFs. | ||||
| ShpicfOspfSpfThrottleMaxWaitTime | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.1.9 | Integer32 (0..600) | RW | |
scalar · Integer32 (0..600) · read-write · current Maximum wait time between two consecutive SPFs. | ||||
| ShpicfOspfSpfThrottleCurrentSpfInterval | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.1.10 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current Current dynamic wait interval between SPF computations | ||||
| ShpicfOspfReferenceCost | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.1.11 | Metric | RW | |
scalar · Metric · read-write · current The reference cost is used as a global configuration for internal area cost. | ||||
| ThpicfOspfRedistTable | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.2 | NA | ||
table · not-accessible · current Table for configuring route redistribution into OSPF. | ||||
| RhpicfOspfRedistEntry | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.2.1 | NA | ||
row · not-accessible · current An entry in the table for configuring route redistribution into OSPF from a single source protocol. Entries in this table are not created dynamically. There will be a single entry for each supported source protocol. | ||||
| ChpicfOspfRedistSrcProto | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.2.1.1 | IANAipRouteProtocol | NA | |
column · IANAipRouteProtocol · not-accessible · current Source protocol to redistribute routes from. | ||||
| ChpicfOspfRedistEnabled | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.2.1.2 | TruthValue | RW | |
column · TruthValue · read-write · current A flag indicating whether OSPF should redistribute routes from this source protocol. | ||||
| ThpicfOspfRedistRestrictTable | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.3 | NA | ||
table · not-accessible · current A table of route prefixes for filtering out routes that OSPF should not redistribute. Any route that is contained by a range in this table (in other words, has a longer mask than that specified by hpicfOspfRedistRestrictMask and where the route destination ANDed with the hpicfOspfRedistRestrictMask is equal to hpicfOspfRedistRestrictAddr) will not be redistributed as an AS-external LSA by OSPF. | ||||
| RhpicfOspfRedistRestrictEntry | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.3.1 | NA | ||
row · not-accessible · current A single entry in the table. Any route, regardless of source protocol which is contained within the specified range will not be redistributed into OSPF. Entries in this table are created dynamically using the hpicfOspfRedistRestrictStatus object. | ||||
| ChpicfOspfRedistRestrictAddr | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.3.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current The IP address of the range of route entries to exclude from redistribution into OSPF. | ||||
| ChpicfOspfRedistRestrictMask | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.3.1.2 | IpAddress | NA | |
column · IpAddress · not-accessible · current The mask for the range of route entries to exclude from redistribution into OSPF. | ||||
| ChpicfOspfRedistRestrictStatus | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.3.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this entry. | ||||
| ThpicfOspfLogTable | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.4 | NA | ||
table · not-accessible · current A table containing the configuration parameters pertaining for OSPF routing protocol logging facility. | ||||
| RhpicfOspfLogEntry | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.4.1 | NA | ||
row · not-accessible · current The configuration parameters pertaining to a OSPF log entry. Each entry contains information about the action and severity for a particular logType, and for each version of OSPF.
| ||||
| ChpicfOspfLogType | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.4.1.1 | HpicfOspfLogType | NA | |
column · HpicfOspfLogType · not-accessible · current The type of log for every kind of event in OSPF routing protocol . | ||||
| ChpicfOspfLogAction | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.4.1.2 | HpicfOspfLogAction | RW | |
column · HpicfOspfLogAction · read-write · current The action, if any, that was taken by the agent when the event represented by hpicfOspfLogType. When enabled, brief information of the event is logged and if it is set to enabledWithDetail, provides more information, like every state changes, will get logged. If it is set to disabled, no events are logged. | ||||
| ThpicfOspfNbrTable | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.5 | NA | ||
table · not-accessible · current HP proprietary extension to ospfNbrTable to support read-only elements for reading neighbor adjacency length, designated router, backup designated router, Area ID and the and time-to-expiry for an OSPF neighbor | ||||
| RhpicfOspfNbrEntry | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.5.1 | NA | ||
row · not-accessible · current Each entry is extension of ospfNbr Entry and gives more information for OSPF neighbors
| ||||
| ChpicfOspfNbrUpTime | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.5.1.1 | PositiveInteger | RO | |
column · PositiveInteger · read-only · current This object specifies the time duration for which the adjacency with the particular neighbor is active. This should be a monotonically increasing timer for the duration the adjacency is active. This counter should be reset when an adjacency is lost or re-established.
| ||||
| ChpicfOspfNbrTimeToExpiry | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.5.1.2 | PositiveInteger | RO | |
column · PositiveInteger · read-only · current This object specifies the time remaining for the dead timer for the particular neighbor to expire. This counter thus specifies the time in seconds left for an adjacency to be brought down in case no Hello packet is received during the interval. | ||||
| ChpicfOspfNbrDesignatedRouter | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.5.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address of the designated router. | ||||
| ChpicfOspfNbrBackupDesignatedRouter | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.5.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address of the backup designated router. | ||||
| ChpicfOspfNbrAreaId | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.5.1.5 | AreaID | RO | |
column · AreaID · read-only · current A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone. | ||||
| ChpicfOspfNbrInterfaceName | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.5.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current The ifName value of this OSPF interface. | ||||
| ChpicfOspfNbrBfdState | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.5.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The ifName value of this OSPF interface.
| ||||
| ThpicfOspfAreaAggregateTable | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.6 | NA | ||
table · not-accessible · current HP proprietary extensions to ospfAreaAggregateTable | ||||
| RhpicfOspfAreaAggregateEntry | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.6.1 | NA | ||
row · not-accessible · current Each entry is extension of ospfAreaAggregateEntry
| ||||
| ChpicfOspfAreaAggregateCost | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.6.1.1 | BigMetric | RC | |
column · BigMetric · read-create · current Manually configured cost of the summary advertisement. A value of 0 indicates that the cost defined and calculated by the OSPF standard should be used. Valid costs range from 1-16777215 | ||||
| ChpicfOspfAreaAggregateType | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.6.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current Configure whether external metric and OSPF metric are comparable. If 'metric-type' is specified as 'type1', the external metric and the OSPF metric are considered comparable. 'type2' implies non-comparable metric
| ||||
| ThpicfOspfDistributeListTable | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.7 | NA | ||
table · not-accessible · current A table of route prefixes for filtering out intra-area routes that OSPF should not install into local routing table. Any route that is contained by a range in this table (in other words, has a longer mask than that specified by hpicfOspfDistributeListMask and where the route destination ANDed with the hpicfOspfDistributeListMask is equal to hpicfOspfDistributeListAddr) will not be installed into FIB by OSPF. | ||||
| RhpicfOspfDistributeListEntry | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.7.1 | NA | ||
row · not-accessible · current A single entry in the table. Any intra-area route, which is contained within the specified range will not be installed into FIB by OSPF. Entries in this table are created dynamically using the hpicfOspfDistributeListStatus object. | ||||
| ChpicfOspfDistributeListAddr | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.7.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current The IP address of the range of route entries to exclude from installing into FIB by OSPF. | ||||
| ChpicfOspfDistributeListMask | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.7.1.2 | IpAddress | NA | |
column · IpAddress · not-accessible · current The mask for the range of route entries to exclude from installing into FIB by OSPF. | ||||
| ChpicfOspfDistributeListStatus | 1.3.6.1.4.1.11.2.14.11.5.1.14.1.7.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this entry. | ||||
| NhpicfOspfConformance | 1.3.6.1.4.1.11.2.14.11.5.1.14.2 | |||
| NhpicfOspfGroups | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.1 | |||
| GhpicfOspfBaseGroup | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.1 | |||
group · current Basic OSPF configuration information that is not in the standard OSPF MIB. | ||||
| GhpicfOspfRedistGroup | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.2 | |||
group · current A collection of objects for controlling the redistribution of external routes by OSPF. | ||||
| GhpicfOspfDistanceGroup | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.3 | |||
group · current A collection of objects for configuring the administrative distance of routes learned by OSPF. | ||||
| GhpicfOspfStatisticGroup | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.4 | |||
group · current A collection of objects that contain OSPF interface and SPF statistics.
| ||||
| GhpicfOspfSpfTimerGroup | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.5 | |||
| GhpicfOspfLogGroup | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.6 | |||
group · current A collection of objects for configuring the logging of OSPF events.
| ||||
| GhpicfOspfNbrGroup | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.7 | deprecated | ||
group · deprecated A collection of read-only elements for an OSPF neighbor. | ||||
| GhpicfOspfIfGroup | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.8 | |||
group · current These interface objects used for managing/monitoring OSPFv2 interfaces. | ||||
| GhpicfOspfAreaLsdbGroup | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.9 | |||
group · current These objects used for managing/monitoring OSPFv2 LSAs.
| ||||
| GhpicfOspfExtLsdbGroup | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.10 | |||
group · current These objects are used for OSPFv2 systems that display their AS-scope link state database. | ||||
| GhpicfOspfAreaAggregateGroup | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.11 | |||
| GhpicfOspfSpfDelayGroup | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.12 | |||
group · current Group for ospfSpfThrottle objects. | ||||
| GhpicfOspfAreaAggregateGroup1 | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.13 | |||
| GhpicfOspfNbrGroup1 | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.14 | |||
group · current A collection of read-only elements for an OSPF neighbor. | ||||
| GhpicfOspfReferenceGroup | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.15 | |||
| GhpicfOspfMetricGroup | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.16 | |||
group · current Flags to identify global or manual OSPF cost configuration.
| ||||
| GhpicfOspfDistributeListGroup | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.18 | |||
group · current A collection of objects for controlling the installation of intra-area routes by OSPF. | ||||
| NhpicfOspfCompliances | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.2 | |||
| MhpicfOspfCompliance | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.2.1 | deprecated | ||
compliance · deprecated The compliance statement for HP Routing Switches that support OSPF. | ||||
| MhpicfOspfReqCompliance | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.2.2 | |||
compliance · current The compliance statement for show Requestlist command. | ||||
| MhpicfOspfFloodCompliance | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.2.3 | |||
compliance · current The compliance statement for show Floodlist command. | ||||
| MhpicfOspfRetransCompliance | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.2.4 | |||
compliance · current The compliance statement for show Retranslist command. | ||||
| MhpicfOspfCompliance1 | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.2.5 | deprecated | ||
compliance · deprecated The compliance statement for this module. | ||||
| MhpicfOspfSpfDelayCompliance | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.2.6 | |||
| MhpicfOspfAreaAggregateCompliance | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.2.7 | |||
| MhpicfOspfCompliance2 | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.2.8 | deprecated | ||
compliance · deprecated The compliance statement for this module. | ||||
| MhpicfOspfCompliance3 | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.2.9 | |||
compliance · current The compliance statement for this module. | ||||
| MhpicfOspfCompliance5 | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.2.11 | |||
compliance · current The compliance statement for HP Routing Switches that support OSPF. | ||||
| NhpicfOspfReqGroups | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.3 | |||
| GhpicfOspfReqManGroup | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.3.1 | |||
group · current A mandatory group that displays ID information with Respect to Link state,router,interface and the LSA type | ||||
| GhpicfOspfReqGroup | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.3.2 | |||
group · current This is a normal group that gives checksum,sequence and age related information | ||||
| NhpicfOspfRetransGroups | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.4 | |||
| GhpicfOspfRetransManGroup | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.4.1 | |||
group · current A mandatory group that displays ID information with Respect to Link state,router,interface and the LSA type | ||||
| GhpicfOspfRetransGroup | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.4.2 | |||
group · current This is a normal group that gives checksum,sequence and age related information | ||||
| NhpicfOspfFloodGroups | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.5 | |||
| GhpicfOspfFloodManGroup | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.5.1 | |||
group · current A mandatory group that displays ID information with Respect to Link state, router, `interface and the LSA type | ||||
| GhpicfOspfFloodGroup | 1.3.6.1.4.1.11.2.14.11.5.1.14.2.5.2 | |||
group · current This is a normal group that gives checksum,sequence and age related information | ||||
| NhpicfOspfRouteGroup | 1.3.6.1.4.1.11.2.14.11.5.1.14.3 | |||
| NhpicfOspfNssaType1 | 1.3.6.1.4.1.11.2.14.11.5.1.14.3.1 | |||
| NhpicfOspfNssaType2 | 1.3.6.1.4.1.11.2.14.11.5.1.14.3.2 | |||
| ThpicfOspfIfTable | 1.3.6.1.4.1.11.2.14.11.5.1.14.4 | NA | ||
table · not-accessible · current Extensions to the table that contains OSPF Interface specific information. | ||||
| RhpicfOspfIfEntry | 1.3.6.1.4.1.11.2.14.11.5.1.14.4.1 | NA | ||
row · not-accessible · current A list of extensions to the information maintained for an OSPF interface.
| ||||
| ChpicfOspfIfPassive | 1.3.6.1.4.1.11.2.14.11.5.1.14.4.1.1 | TruthValue | RW | |
column · TruthValue · read-write · current The passive state configuration of the OSPF interface.
In the passive mode no OSPF protocol messages are exchanged on
this interface.
true (1) - The interface is configured to work in Passive mode
false (2) - The interface is configured to work in normal mode.
This is the default configuration.
Changing the value will cause OSPF to reset on this interface and
make necessary adjustments to the link state database.
All other operations are not defined and will not affect the state of
the protocol. | ||||
| ChpicfOspfIfNbrCount | 1.3.6.1.4.1.11.2.14.11.5.1.14.4.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object specifies the number of OSPFv3 neighbors present in this interface. This counter should be incremented when a new neighbor is added in the network in which this interface is present. It should be decremented when a neighbor is disconnected. | ||||
| ChpicfOspfIfBfdEnbl | 1.3.6.1.4.1.11.2.14.11.5.1.14.4.1.3 | TruthValue | RW | |
column · TruthValue · read-write · current param to enable BFD under OSPF | ||||
| ThpicfOspfIfStatsTable | 1.3.6.1.4.1.11.2.14.11.5.1.14.5 | NA | ||
table · not-accessible · current Table that contains OSPF Interface traffic specific information. | ||||
| RhpicfOspfIfStatsEntry | 1.3.6.1.4.1.11.2.14.11.5.1.14.5.1 | NA | ||
row · not-accessible · current A list of extensions to the information maintained for an OSPF interface. | ||||
| ChpicfOspfSentHelloPkt | 1.3.6.1.4.1.11.2.14.11.5.1.14.5.1.1 | Counter32 | RO | |
column · Counter32 · read-only · current The number of OSPF Hello packets sent on the interface. This number is incremented each time an OSPF Hello packet is sent out of an OSPF enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using clear ip ospf statistics command. | ||||
| ChpicfOspfSentDDPkt | 1.3.6.1.4.1.11.2.14.11.5.1.14.5.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The number of Database Description packets sent on the interface. This number is incremented each time an OSPF DD packet is sent out of an OSPF enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using clear ip ospf statistics command. | ||||
| ChpicfOspfSentLSRPkt | 1.3.6.1.4.1.11.2.14.11.5.1.14.5.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The number of Link State Request packet sent on the interface. This number is incremented each time an OSPF LSR packet is sent out of OSPF enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using clear ip ospf statistics command. | ||||
| ChpicfOspfSentLSUPkt | 1.3.6.1.4.1.11.2.14.11.5.1.14.5.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The number of Link State Update packet sent on the interface. This number is incremented each time an OSPF LSU packet is sent out of an OSPF enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using clear ip ospf statistics command. | ||||
| ChpicfOspfSentLSAPkt | 1.3.6.1.4.1.11.2.14.11.5.1.14.5.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The number of Link State Ack packet sent on the interface. This number is incremented each time an OSPF LSA packet is sent out of an OSPF enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using clear ip ospf statistics command. | ||||
| ChpicfOspfRcvdHelloPkt | 1.3.6.1.4.1.11.2.14.11.5.1.14.5.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The number of Hello packets received on the interface. This number is incremented each time a hello packet is received on OSPF enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using clear ip ospf statistics command. | ||||
| ChpicfOspfRcvdDDPkt | 1.3.6.1.4.1.11.2.14.11.5.1.14.5.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The number of Database Description packets received on the interface. This number is incremented each time a OSPF DD packet is received on OSPF enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using clear ip ospf statistics command. | ||||
| ChpicfOspfRcvdLSRPkt | 1.3.6.1.4.1.11.2.14.11.5.1.14.5.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The number of Link State Request packets received on the interface. This number is incremented each time a OSPF LSR packet is received on OSPF enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using clear ip ospf statistics command. | ||||
| ChpicfOspfRcvdLSUPkt | 1.3.6.1.4.1.11.2.14.11.5.1.14.5.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The number of Link State Update packets received on the interface. This number is incremented each time a OSPF LSU packet is received on OSPF enabled interface. | ||||
| ChpicfOspfRcvdLSAPkt | 1.3.6.1.4.1.11.2.14.11.5.1.14.5.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current The number of Link State Ack packets received on the interface. This number is incremented each time a OSPF LSA packet is received on OSPF enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using clear ip ospf statistics command. | ||||
| ThpicfOspfIfErrorTable | 1.3.6.1.4.1.11.2.14.11.5.1.14.6 | NA | ||
table · not-accessible · current Table that contains OSPF Interface traffic specific information. | ||||
| RhpicfOspfIfErrorEntry | 1.3.6.1.4.1.11.2.14.11.5.1.14.6.1 | NA | ||
row · not-accessible · current A list of extensions to the information maintained for an OSPF interface. | ||||
| ChpicfOspfIfErrorType | 1.3.6.1.4.1.11.2.14.11.5.1.14.6.1.1 | Integer32 (-2147483648..2147483647) | NA | |
column · Integer32 (-2147483648..2147483647) · not-accessible · current The hpicfOspfIfErrorType refers to the type of errors in the OSPF packet received on any OSPF enabled interface. Errors could be Invalid RouterID/ AreaID Checksum error, OutOfbound Error ... | ||||
| ChpicfOspfIfErrorCount | 1.3.6.1.4.1.11.2.14.11.5.1.14.6.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The hpicfOspfErrorCount is count of each type error packet received on an OSPF interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using clear ip ospf statistics command | ||||
| ThpicfOspfIfClearStatsTable | 1.3.6.1.4.1.11.2.14.11.5.1.14.7 | NA | ||
table · not-accessible · current A list used to clear statistics information maintained for an OSPF interface. | ||||
| RhpicfOspfIfClearStatsEntry | 1.3.6.1.4.1.11.2.14.11.5.1.14.7.1 | NA | ||
row · not-accessible · current A list used to clear statistics information maintained for an OSPF interface. | ||||
| ChpicfOspfClearCounters | 1.3.6.1.4.1.11.2.14.11.5.1.14.7.1.1 | TruthValue | RW | |
column · TruthValue · read-write · current Read of this will always be false, When this variable is set to true for a given Ipaddress interface, corresponding interface counters will be cleared. | ||||
| ThpicfOspfSpfTable | 1.3.6.1.4.1.11.2.14.11.5.1.14.8 | NA | ||
table · not-accessible · current Table that contains OSPF SPF information. | ||||
| RhpicfOspfSpfEntry | 1.3.6.1.4.1.11.2.14.11.5.1.14.8.1 | NA | ||
row · not-accessible · current A list of extensions to the information maintained for OSPF SPF runs.
| ||||
| ChpicfOspfSpfInstance | 1.3.6.1.4.1.11.2.14.11.5.1.14.8.1.1 | Integer32 (-2147483648..2147483647) | NA | |
column · Integer32 (-2147483648..2147483647) · not-accessible · current The hpicfospfSpfInstance refers to the instance of SPF Shortest Path First ran for an OSPF instance. | ||||
| ChpicfOspfSpfReason | 1.3.6.1.4.1.11.2.14.11.5.1.14.8.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The hpicfOspfSpfReason refers to the reason for scheduling an SPF run. Reasons could be OSPF init, adding/deleting interface, linkStateUpdate received.. Only last ten SPF run's reasons will be saved. | ||||
| ChpicfOspfSpfTime | 1.3.6.1.4.1.11.2.14.11.5.1.14.8.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The hpicfOspfSpfTime refers to the time at which SPF run is scheduled. Reasons could be OSPF init, adding/deleting interface, linkStateUpdate received.. Only last ten SPF run's reasons will be saved.
| ||||
| ThpicfOspfReqTable | 1.3.6.1.4.1.11.2.14.11.5.1.14.9 | NA | ||
table · not-accessible · current Request List table that contains OSPF Specific interface information. | ||||
| RhpicfOspfReqEntry | 1.3.6.1.4.1.11.2.14.11.5.1.14.9.1 | NA | ||
row · not-accessible · current A Request List entries that contain fields of link state advertisement. | ||||
| ChpicfOspfReqType | 1.3.6.1.4.1.11.2.14.11.5.1.14.9.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The type of the Request List's link state advertisement. Each link state type has a separate advertisement format.
| ||||
| ChpicfOspfReqLsid | 1.3.6.1.4.1.11.2.14.11.5.1.14.9.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The Request List's Link State ID is an LS Type Specific field containing either a Router ID or an IP address; it identifies the piece of the routing domain that is being described by the advertisement. | ||||
| ChpicfOspfReqRouterId | 1.3.6.1.4.1.11.2.14.11.5.1.14.9.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The 32-bit number that uniquely identifies the originating router in the Autonomous System. | ||||
| ChpicfOspfReqSequence | 1.3.6.1.4.1.11.2.14.11.5.1.14.9.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The Request List's sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect old and duplicate Link State Advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement. | ||||
| ChpicfOspfReqAge | 1.3.6.1.4.1.11.2.14.11.5.1.14.9.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current This Request list's field is the age of the link state advertisement in seconds.
| ||||
| ChpicfOspfReqChecksum | 1.3.6.1.4.1.11.2.14.11.5.1.14.9.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current This Request list's field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagram's; it is commonly referred to as the Fletcher checksum. | ||||
| ThpicfOspfRetransTable | 1.3.6.1.4.1.11.2.14.11.5.1.14.10 | NA | ||
table · not-accessible · current Retransmission List table that contains Ospf Interface Specific information. | ||||
| RhpicfOspfRetransEntry | 1.3.6.1.4.1.11.2.14.11.5.1.14.10.1 | NA | ||
row · not-accessible · current Retransmission list entry that is maintained for an OSPF Interface. | ||||
| ChpicfOspfRetransType | 1.3.6.1.4.1.11.2.14.11.5.1.14.10.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The Retransmission List LSA type. Each link state type has a separate advertisement format.
| ||||
| ChpicfOspfRetransLsid | 1.3.6.1.4.1.11.2.14.11.5.1.14.10.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The Retransmission List Link State ID is an LS Type Specific field containing either a Router ID or an IP address; it identifies the piece of the routing domain that is being described by the advertisement. | ||||
| ChpicfOspfRetransRouterId | 1.3.6.1.4.1.11.2.14.11.5.1.14.10.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The 32-bit number that uniquely identifies the originating Retransmission List router in the Autonomous System. | ||||
| ChpicfOspfRetransSequence | 1.3.6.1.4.1.11.2.14.11.5.1.14.10.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The Retransmission List sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect old and duplicate Link State Advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement. | ||||
| ChpicfOspfRetransAge | 1.3.6.1.4.1.11.2.14.11.5.1.14.10.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current This Retransmission List field is the age of the link state advertisement in seconds.
| ||||
| ChpicfOspfRetransChecksum | 1.3.6.1.4.1.11.2.14.11.5.1.14.10.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current This Retransmission field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagram's; it is commonly referred to as the Fletcher checksum. | ||||
| ThpicfOspfFloodTable | 1.3.6.1.4.1.11.2.14.11.5.1.14.11 | NA | ||
table · not-accessible · current Flood list table that contains Ospf Interface Specific information | ||||
| RhpicfOspfFloodEntry | 1.3.6.1.4.1.11.2.14.11.5.1.14.11.1 | NA | ||
row · not-accessible · current A Flood list information maintained for an OSPF Interface | ||||
| ChpicfOspfFloodType | 1.3.6.1.4.1.11.2.14.11.5.1.14.11.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The flood list LSA type .Each link state type has a separate advertisement format.
| ||||
| ChpicfOspfFloodLsid | 1.3.6.1.4.1.11.2.14.11.5.1.14.11.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The flood list Link State ID is an LS Type Specific field containing either a Router ID or an IP address; it identifies the piece of the routing domain that is being described by the advertisement. | ||||
| ChpicfOspfFloodRouterId | 1.3.6.1.4.1.11.2.14.11.5.1.14.11.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The 32-bit number that uniquely identifies the originating flood list router in the Autonomous System. | ||||
| ChpicfOspfFloodSequence | 1.3.6.1.4.1.11.2.14.11.5.1.14.11.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The flood list sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect old and duplicate Link State Advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement. | ||||
| ChpicfOspfFloodAge | 1.3.6.1.4.1.11.2.14.11.5.1.14.11.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current This flood list field is the age of the link state advertisement in seconds.
| ||||
| ChpicfOspfFloodChecksum | 1.3.6.1.4.1.11.2.14.11.5.1.14.11.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current This flood list field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagram's; it is commonly referred to as the Fletcher checksum. | ||||
| ShpicfOspfSpfTimerElapsed | 1.3.6.1.4.1.11.2.14.11.5.1.14.12 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current The elapsed time since the last Ospf Spf is run | ||||
| ThpicfOspfAreaLsdbTable | 1.3.6.1.4.1.11.2.14.11.5.1.14.14 | NA | ||
table · not-accessible · current The OSPF Process's Area-Scope LSDB. The LSDB contains the Area-Scope Link State Advertisements from throughout the area that the device is attached to. | ||||
| RhpicfOspfAreaLsdbEntry | 1.3.6.1.4.1.11.2.14.11.5.1.14.14.1 | NA | ||
| ChpicfOspfAreaLsdbRtrCapBits | 1.3.6.1.4.1.11.2.14.11.5.1.14.14.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This field is valid if the LSA is a Router LSA. It uniquely identifies the router type of the router in the Area. | ||||
| ChpicfOspfAreaLsdbOptions | 1.3.6.1.4.1.11.2.14.11.5.1.14.14.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The Options field enables OSPF routers to support (or not support) optional capabilities, and to communicate their capability level to other OSPF routers. This field is valid for each type of LSA. | ||||
| ChpicfOspfAreaLsdbMetric | 1.3.6.1.4.1.11.2.14.11.5.1.14.14.1.3 | Metric | RO | |
column · Metric · read-only · current This field is valid if the LSA is a Router LSA, a Summary LSA, AS Summary LSA or a NSSA LSA. This field indicates the cost involved in using the interface or route. | ||||
| ChpicfOspfAreaLsdbAddrPrefix | 1.3.6.1.4.1.11.2.14.11.5.1.14.14.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The Prefix the Address. | ||||
| ChpicfOspfAreaLsdbFwdingAddress | 1.3.6.1.4.1.11.2.14.11.5.1.14.14.1.5 | HpicfOspfRouterIdTc | RO | |
column · HpicfOspfRouterIdTc · read-only · current This field is valid if the LSA is a NSSA LSA. This field is present only if the 'F' Bit is set in the EFT flags field and if included, the data traffic for the advertised destination will be forwarded to this address. | ||||
| ChpicfOspfAreaLsdbExtRouteTags | 1.3.6.1.4.1.11.2.14.11.5.1.14.14.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This field is valid if the LSA is a NSSA LSA. This field is present only if the 'T' Bit is set in the EFT flags field. A 32-bit field which may be used to communicate additional information between AS boundary routers. | ||||
| ChpicfOspfTOS | 1.3.6.1.4.1.11.2.14.11.5.1.14.14.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The 32-bit identifier for the TOS specific information of the LSA. | ||||
| ChpicfOspfLsdbRouterLinks | 1.3.6.1.4.1.11.2.14.11.5.1.14.14.1.8 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This field is valid if the LSA is Router LSA. It holds the information of Number of links in the router LSA. | ||||
| ChpicfOspfLsdbBitE | 1.3.6.1.4.1.11.2.14.11.5.1.14.14.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The 32-bit identifier for the Metric specific information of the LSA. | ||||
| ThpicfOspfRouterLSATable | 1.3.6.1.4.1.11.2.14.11.5.1.14.15 | NA | ||
table · not-accessible · current This table having Area scope is a dependent-expansion table for the Router LSA entry in the Area LSDB table. It represents the list of per interface details advertised in a Router LSA. | ||||
| RhpicfOspfRouterLSAEntry | 1.3.6.1.4.1.11.2.14.11.5.1.14.15.1 | NA | ||
row · not-accessible · current A single Area-Scope Link State Advertisement. | ||||
| ChpicfOspfRouterLSANbrRtrId | 1.3.6.1.4.1.11.2.14.11.5.1.14.15.1.1 | HpicfOspfRouterIdTc | NA | |
column · HpicfOspfRouterIdTc · not-accessible · current The router id of the router which is connected over the interface Id. | ||||
| ChpicfOspfRouterLSAIfType | 1.3.6.1.4.1.11.2.14.11.5.1.14.15.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The 32-bit identifier of the Area from which the LSA was received. | ||||
| ChpicfOspfRouterLSAMetric | 1.3.6.1.4.1.11.2.14.11.5.1.14.15.1.3 | Metric | RO | |
column · Metric · read-only · current This field indicates the cost involved in using the interface or route. | ||||
| ChpicfOspfRouterLSAIfId | 1.3.6.1.4.1.11.2.14.11.5.1.14.15.1.4 | HpicfOspfRouterIdTc | RO | |
column · HpicfOspfRouterIdTc · read-only · current The interface Id of the router that connects to the other router. | ||||
| ChpicfOspfRouterLSATOSMetric | 1.3.6.1.4.1.11.2.14.11.5.1.14.15.1.5 | Unsigned32 (0..4294967295) | RO | |
column · Unsigned32 (0..4294967295) · read-only · current This field indicates the cost involved in using the interface or route specific to TOS. | ||||
| ThpicfOspfNetworkLSATable | 1.3.6.1.4.1.11.2.14.11.5.1.14.16 | NA | ||
table · not-accessible · current This table having Area scope is a dependent-expansion table for the Network LSA entry in the Area LSDB table. This table represents the list of routers advertised in a Network LSA. | ||||
| RhpicfOspfNetworkLSAEntry | 1.3.6.1.4.1.11.2.14.11.5.1.14.16.1 | NA | ||
row · not-accessible · current A single Area-Scope Link State Advertisement. | ||||
| ChpicfOspfNetworkLSASeqNum | 1.3.6.1.4.1.11.2.14.11.5.1.14.16.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The 32-bit sequence number identifying the attached router-ids. | ||||
| ChpicfOspfNetworkLSAAttachedRouter | 1.3.6.1.4.1.11.2.14.11.5.1.14.16.1.2 | HpicfOspfRouterIdTc | RO | |
column · HpicfOspfRouterIdTc · read-only · current The 32-bit Router identifier of the attached Router. | ||||
| ThpicfOspfExtLsdbTable | 1.3.6.1.4.1.11.2.14.11.5.1.14.17 | NA | ||
table · not-accessible · current The OSPFv3 Process's AS-Scope Link State Database (LSDB). The LSDB contains the AS-Scope Link State Advertisements from throughout the areas that the device is attached to. | ||||
| RhpicfOspfExtLsdbEntry | 1.3.6.1.4.1.11.2.14.11.5.1.14.17.1 | NA | ||
| ChpicfOspfExtLsdbMetric | 1.3.6.1.4.1.11.2.14.11.5.1.14.17.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The cost associated with this route. | ||||
| ChpicfOspfExtLsdbOptions | 1.3.6.1.4.1.11.2.14.11.5.1.14.17.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The Options field enables OSPF routers to support (or not support) optional capabilities, and to communicate their capability level to other OSPF routers. | ||||
| ChpicfOspfExtLsdbFwdingAddress | 1.3.6.1.4.1.11.2.14.11.5.1.14.17.1.3 | HpicfOspfRouterIdTc | RO | |
column · HpicfOspfRouterIdTc · read-only · current If included, Data traffic for the advertised destination will be forwarded to this address. | ||||
| ChpicfOspfExtLsdbExtRouteTags | 1.3.6.1.4.1.11.2.14.11.5.1.14.17.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The 32-bit Router Tags for the advertised Route. | ||||
| ChpicfOspfExtLsdbBitE | 1.3.6.1.4.1.11.2.14.11.5.1.14.17.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The type of External metric. If bit E is set, the metric specified is Type 2 external metric. | ||||
| NhpicfOspfIfMetricObjects | 1.3.6.1.4.1.11.2.14.11.5.1.14.18 | |||
| ThpicfOspfIfMetricTable | 1.3.6.1.4.1.11.2.14.11.5.1.14.18.1 | NA | ||
table · not-accessible · current Extensions to the table that contains OSPF Metric specific information. | ||||
| RhpicfOspfIfMetricEntry | 1.3.6.1.4.1.11.2.14.11.5.1.14.18.1.1 | NA | ||
row · not-accessible · current A list of extensions to the information maintained for an OSPF interface.
| ||||
| ChpicfOspfIfFlagValue | 1.3.6.1.4.1.11.2.14.11.5.1.14.18.1.1.1 | Integer32 (-1..1) | RW | |
column · Integer32 (-1..1) · read-write · current This flag is defined to know the type of OSPF cost
configuration..
-1 : Default configuration.
0 : Manual configuration.
1 : Global configuration (value taken from global). | ||||
Textual conventions
HpicfOspfLogActionINTEGERdisabled(2)enabled(1)enabledWithDetail(3)Objects of this type are used to indicate action for every log type.
HpicfOspfLogTypeINTEGERneighborAdjacencyChanges(1)other(2)An enumerated value which indicates the rmon log type for OSPF Routing protocol.
HpicfOspfRouterIdTcUnsigned32 (1..4294967295)Display hint:
d-0A 32-bit, unsigned integer uniquely identifying the router in the Autonomous System. To ensure uniqueness, this may default to the value of one of the router's IPv4 host addresses if IPv4 is configured on the router.
Groups and compliance
- hpicfOspfAreaAggregateCompliance
- hpicfOspfAreaAggregateGroup
- hpicfOspfAreaAggregateGroup1
- hpicfOspfAreaLsdbGroup
- hpicfOspfBaseGroup
- hpicfOspfCompliance
- hpicfOspfCompliance1
- hpicfOspfCompliance2
- hpicfOspfCompliance3
- hpicfOspfCompliance5
- hpicfOspfDistanceGroup
- hpicfOspfDistributeListGroup
- hpicfOspfExtLsdbGroup
- hpicfOspfFloodCompliance
- hpicfOspfFloodGroup
- hpicfOspfFloodManGroup
- hpicfOspfIfGroup
- hpicfOspfLogGroup
- hpicfOspfMetricGroup
- hpicfOspfNbrGroup
- hpicfOspfNbrGroup1
- hpicfOspfRedistGroup
- hpicfOspfReferenceGroup
- hpicfOspfReqCompliance
- hpicfOspfReqGroup
- hpicfOspfReqManGroup
- hpicfOspfRetransCompliance
- hpicfOspfRetransGroup
- hpicfOspfRetransManGroup
- hpicfOspfSpfDelayCompliance
- hpicfOspfSpfDelayGroup
- hpicfOspfSpfTimerGroup
- hpicfOspfStatisticGroup