HP-CAR-MIB
Hewlett-Packardsnmptranslate -m HP-CAR-MIB -Tpsnmpwalk -v2c -c <community> -m HP-CAR-MIB <host> 1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1Imports
| HP-SN-SWITCH-GROUP-MIB | snCAR |
|---|---|
| RFC1155-SMI | Gauge32 |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| NsnPortCARs | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1 | |||
| TsnPortCARTable | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1 | NA | mandatory | |
table · not-accessible · mandatory A table of rate limit configuration entries. Rate Limit is a method of traffic control. It allows a set of rate limits to be configured and applied to packets flowing into/out of an interface to regulate network traffic. | ||||
| RsnPortCAREntry | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1 | NA | mandatory | |
row · not-accessible · mandatory A collection of rate-limit configuration objects on this interface. | ||||
| CsnPortCARifIndex | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The ifIndex value for this rate limit entry. | ||||
| CsnPortCARDirection | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.2 | PacketSource | RO | mandatory |
column · PacketSource · read-only · mandatory The input or output transmission direction for the
Rate Limit object.
input (0), --for inbound traffic
output(1) --for outbound traffic | ||||
| CsnPortCARRowIndex | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.3 | INTEGER (1..2147483647) | RO | mandatory |
column · INTEGER (1..2147483647) · read-only · mandatory The table index for rate limit objects. It increases as the rate limit entries are added. Skips the number when a row is deleted. | ||||
| CsnPortCARType | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.4 | RateLimitType | RO | mandatory |
column · RateLimitType · read-only · mandatory The type of traffic rate-limited against. | ||||
| CsnPortCARAccIdx | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The index to the access list if RateLimitType is either quickAcc or standardAcc. | ||||
| CsnPortCARRate | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The comitted access rate. This determines the long term average transmission rate. Traffic that falls under this rate always conforms. This is average rate in bits per second. | ||||
| CsnPortCARLimit | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.7 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This is the normal burst size that determines how large traffic bursts can be before some traffic exceeds the rate limit. This specifies the number of bytes that are guaranteed to be transported by the network at the average rate under normal conditions during committed time interval. This normal burst size is in bytes. | ||||
| CsnPortCARExtLimit | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.8 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This is the extended burst limit that determines how large traffic bursts can be before all the traffic exceeds the rate limit. This burst size is in bytes. | ||||
| CsnPortCARConformAction | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.9 | RateLimitAction | RO | mandatory |
column · RateLimitAction · read-only · mandatory Action to be taken when the traffic is within the Rate Limit. drop drop the packet. xmit transmit the packet. continue continue to evaluate to the subsequent rate limits. precedXmit rewrite the IP precedence and transmit the packet. precedCont rewrite the IP precedence and allow it evaluated by subsequent rate limits. | ||||
| CsnPortCARExceedAction | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.10 | RateLimitAction | RO | mandatory |
column · RateLimitAction · read-only · mandatory Action to be taken when the traffic exceeds the Rate Limit.drop drop the packet. xmit transmit the packet. continue continue to evaluate to the subsequent rate limits. precedXmit rewrite the IP precedence and transmit the packet. precedCont rewrite the IP precedence and allow it evaluated by subsequent rate limits. | ||||
| CsnPortCARStatSwitchedPkts | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.11 | Counter64 | RO | mandatory |
column · Counter64 · read-only · mandatory The counter of packets permitted by this rate limit. | ||||
| CsnPortCARStatSwitchedBytes | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.12 | Counter64 | RO | mandatory |
column · Counter64 · read-only · mandatory The counter of bytes permitted by this interface. | ||||
| CsnPortCARStatFilteredPkts | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.13 | Counter64 | RO | mandatory |
column · Counter64 · read-only · mandatory The counter of packets which exceeded this rate limit. | ||||
| CsnPortCARStatFilteredBytes | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.14 | Counter64 | RO | mandatory |
column · Counter64 · read-only · mandatory The counter of bytes which exceeded this rate limit. | ||||
| CsnPortCARStatCurBurst | 1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.15 | Gauge32 | RO | mandatory |
column · Gauge32 · read-only · mandatory The current received burst size. | ||||