HP-AUTZ-MIB
Hewlett-PackardThis MIB module contains the definitions of objects for managing the user authorization service on HP networking devices.
snmptranslate -m HP-AUTZ-MIB -Tpsnmpwalk -v2c -c <community> -m HP-AUTZ-MIB <host> 1.3.6.1.4.1.11.2.14.11.5.1.32Imports
| HP-ICF-OID | hpSwitch |
|---|---|
| HP-ICF-TC | VidList |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| Q-BRIDGE-MIB | VlanIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IhpSwitchAuthorizationMIB | 1.3.6.1.4.1.11.2.14.11.5.1.32 | |||
identity This MIB module contains the definitions of objects for managing the user authorization service on HP networking devices. | ||||
| NhpicfSwitchAuthorizationNotifications | 1.3.6.1.4.1.11.2.14.11.5.1.32.0 | |||
| !hpicfSwitchAuthServerFail | 1.3.6.1.4.1.11.2.14.11.5.1.32.0.1 | |||
notification · current This notification indicates that the specified server is not reachable. | ||||
| NhpSwitchAuthorizationConfig | 1.3.6.1.4.1.11.2.14.11.5.1.32.1 | |||
| ThpSwitchAutzServiceTable | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.1 | NA | ||
table · not-accessible · current The (conceptual) table listing the authorization service types. | ||||
| RhpSwitchAutzServiceEntry | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.1.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the hpSwitchAutzServiceTable. | ||||
| ChpSwitchAutzServiceType | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.1.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current Signifies the authorization service type for which this entry contains configuration information.
| ||||
| ChpSwitchAutzServicePrimaryMethod | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The primary method used for authorization. This object can be set only when the authorization service type is command. A value of local (1) indicates that authorization is performed locally. A value of tacacs (2) indicates that authorization is performed using TACACS+. A value of radius (3) indicates that authorization is performed using RADIUS. A value of none (4) indicates that authorization is not performed. A value of auto (5) indicates that authorization is performed by the same protocol that is configured for authentication.
| ||||
| ChpSwitchAutzServiceSecondaryMethod | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Specifies the secondary (backup) method used for authorization.
| ||||
| ChpSwitchAutzServiceCommandsLevel | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current This object specifies the command level that requires authorization. A value of all (1) indicates that authorization is required for all commands. A value of managerLevelOnly (2) indicates that the authorization is required only for manager level commands. This object is only valid when the value of hpSwitchAutzServiceType is 'commands'. The default is 'all'.
| ||||
| NhpicfSwitchAuthObjects | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.2 | |||
| ShpicfSwitchAuthServerType | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.2.1 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current Authorization server type reported in hpicfSwitchAuthorization notifications.
| ||||
| ShpicfSwitchAuthServerIPType | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.2.2 | InetAddressType | AN | |
scalar · InetAddressType · accessible-for-notify · current InetAddressType of the address reported in hpicfSwitchAuthServerIP. | ||||
| ShpicfSwitchAuthServerIP | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.2.3 | InetAddress | AN | |
scalar · InetAddress · accessible-for-notify · current This object is used in an hpicfSwitchAuthorizationNotification to report the IP address of the affected server. | ||||
| NhpSwitchAuthConfigObjects | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.3 | |||
| ShpicfSwitchAuthServerNotifyEnable | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.3.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The operational status of hpicfSwitchAuthServerFail notifications. The default value is 1 (Enabled). A value of 2 represents Disabled. Writing this object requires authentication, such as provided by SNMPv3.
| ||||
| NhpSwitchAuthLocalPrivConfigObjects | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.4 | |||
| ThpSwitchLocalMgmtPrivGroupsTable | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.4.1 | NA | ||
table · not-accessible · current This table lists the local management privilege group names. | ||||
| RhpSwitchLocalMgmtPrivGroupsEntry | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.4.1.1 | NA | ||
| ChpSwitchLocalMgmtPrivGroupIndex | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.4.1.1.1 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current The index value which uniquely identifies a row in the group table. The values, One (1) is reserved for a predefined manager group, Two (2) is reserved for usernames that are not assigned to a group. The privileges for usernames that do not have a group assignment is the same as operator'. | ||||
| ChpSwitchLocalMgmtPrivGroupName | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.4.1.1.2 | OCTET STRING (SIZE (1..255)) | RC | |
column · OCTET STRING (SIZE (1..255)) · read-create · current The name of a given Local Management server group. | ||||
| ChpSwitchLocalMgmtPrivGroupStatus | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.4.1.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current The status of the local management privilege group row. | ||||
| ThpSwitchLocalMgmtPrivCommandsTable | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.4.2 | NA | ||
table · not-accessible · current This table lists the local management Privilege Command Match strings. | ||||
| RhpSwitchLocalMgmtPrivCommandsEntry | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.4.2.1 | NA | ||
row · not-accessible · current Local Management Commands entry. | ||||
| ChpSwitchLocalMgmtPrivCmdSequenceIndex | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.4.2.1.1 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current The index value which uniquely identifies a row in the command table. See the documentation for the number of sequences allowed. | ||||
| ChpSwitchLocalMgmtPrivCmdMatchStr | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.4.2.1.2 | OCTET STRING (SIZE (0..65535)) | RC | |
column · OCTET STRING (SIZE (0..65535)) · read-create · current The syntax of a command within a group. See the documentation for the maximum length of the command name. | ||||
| ChpSwitchLocalMgmtPrivCmdPriv | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.4.2.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current The privilege associated with commands that match the command string.
| ||||
| ChpSwitchLocalMgmtPrivCmdSendLog | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.4.2.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current Determines if a log message is generated when commands matching this command string are attempted.
| ||||
| ChpSwitchLocalMgmtPrivCmdStatus | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.4.2.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current The status of the local management privilege command row. | ||||
| NhpSwitchAutzUserRole | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5 | |||
| ShpSwitchAutzUserRoleEnabled | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.1 | TruthValue | RW | |
scalar · TruthValue · read-write · current Enable user role-based authorization. When enabled, authenticated clients are assigned roles that determine authorization level. When disabled, roles are not used. | ||||
| ShpSwitchAutzUserRoleInitialRoleName | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.2 | HpAutzUserRoleName | RW | |
scalar · HpAutzUserRoleName · read-write · current The value of this object must match the hpSwitchAutzUserRoleName of an entry in the hpSwithcAutzUserRoleTable. | ||||
| ThpSwitchAutzUserRoleTable | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3 | NA | ||
table · not-accessible · current A table of configured user roles. The maximum number of entries is implementation dependent. | ||||
| RhpSwitchAutzUserRoleEntry | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1 | NA | ||
| ChpSwitchAutzUserRoleName | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.1 | HpAutzUserRoleName | NA | |
column · HpAutzUserRoleName · not-accessible · current The name of this user role. | ||||
| ChpSwitchAutzUserRoleRowStatus | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The Row Status of this entry.
To create a new entry, send an SNMP SET request with a
RowStatus of 'createAndGo'.
active - the entry is ready to use.
notInService - not valid for this table.
notReady - the entry is not fully configured.
createAndGo - create a new entry. Entries of
hpSwitchAutzUserRoleType 'downloaded'
cannot be created or modified.
createAndWait - not valid for this table.
delete - delete the entry. Entries of
hpSwitchAutzUserRoleType 'predefined' and
the entry assigned to
hpSwitchAutzUserRoleInitialRoleName cannot
be deleted. | ||||
| ChpSwitchAutzUserRoleType | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current This object defines different user role types supported. Predefined user roles cannot be modified or deleted. Downloaded user roles cannot be modified or created.
| ||||
| ChpSwitchAutzUserRoleCaptivePortalProfileName | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.4 | OCTET STRING (SIZE (0..63)) | RC | |
column · OCTET STRING (SIZE (0..63)) · read-create · current The name of the captive portal profile (hpicfUsrAuthCaptivePortalProfileName) associated with this role. All printable ASCII characters are allowed except '.', ' ', and '~'. | ||||
| ChpSwitchAutzUserRoleIngressUserPolicyName | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.5 | OCTET STRING (SIZE (0..64)) | RC | |
column · OCTET STRING (SIZE (0..64)) · read-create · current The name associated with hpicfGppcv2NpPolicyName of hpicfGppcv2NpSubType 'policyUser' assigned to this role. | ||||
| ChpSwitchAutzUserRoleReauthPeriod | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.6 | Integer32 (0..999999999) | RC | |
column · Integer32 (0..999999999) · read-create · current Specifies the period, in seconds, at which an authenticated client must re-authenticate. A value of 0 signifies that an authenticated client will never have to re-authenticate.
| ||||
| ChpSwitchAutzUserRoleVlanId | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.7 | VlanIndex | RC | |
column · VlanIndex · read-create · current The untagged VLAN ID for this role. A value of 0 indicates unset. This column is mutually exclusive with hpSwitchAutzUserRoleVlanName. | ||||
| ChpSwitchAutzUserRoleVlanName | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.8 | SnmpAdminString (SIZE (0..32)) | RC | |
column · SnmpAdminString (SIZE (0..32)) · read-create · current The untagged VLAN name for this role. This column is mutually exclusive with hpSwitchAutzUserRoleVlanId. | ||||
| ChpSwitchAutzUserRoleTunneledNodeServerRedirect | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.9 | INTEGER | RC | |
column · INTEGER · read-create · current Enables or disables the traffic redirection to the tunnel. If the MIB object 'hpSwitchAutzUserRoleCaptivePortalProfileName' is already enabled and an attempt is made to enable this object, it will result in an error. The MIB object can be enabled only if there is a tagged or untagged VLAN present in the user role.
| ||||
| ChpSwitchAutzUserRoleTunneledNodeServerSecondaryRole | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.10 | OCTET STRING (SIZE (0..63)) | RC | |
column · OCTET STRING (SIZE (0..63)) · read-create · current The secondary role associated with this user role. This will be applied to user traffic at tunnel-node server end. All printable ASCII characters are allowed except '.', ' ' and '~'. This object returns an error if the secondary role name is greater than 63 characters. | ||||
| ChpSwitchAutzUserRoleTaggedVlanId | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.11 | VlanIndex | RC | deprecated |
column · VlanIndex · read-create · deprecated The tagged VLAN ID for this role. A value of 0 indicates unset. This column is mutually exclusive with hpSwitchAutzUserRoleTaggedVlanName,. | ||||
| ChpSwitchAutzUserRoleTaggedVlanName | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.12 | SnmpAdminString (SIZE (0..32)) | RC | |
column · SnmpAdminString (SIZE (0..32)) · read-create · current The tagged VLAN name for this role. This column is mutually exclusive with hpSwitchAutzUserRoleTaggedVlanId. | ||||
| ChpSwitchAutzUserRoleTunneledNodeServerDownloadableRole | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.13 | TruthValue | RC | |
column · TruthValue · read-create · current This object indicates if the secondary roles is downloadable user role or not.The hpSwitchAutzUserRoleTunneledNodeServerRedirectobject should be enabled before configuring this object. | ||||
| ChpSwitchAutzUserRoleLogOffPeriod | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.14 | Integer32 (0 | 60..9999999) | RC | |
column · Integer32 (0 | 60..9999999) · read-create · current Specifies the period, in seconds, at which an authenticated client must automatically log-off. A value of 0 signifies that an authenticated client will never have to automatically log-off.
| ||||
| ChpSwitchAutzUserRoleCachedReauthPeriod | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.15 | Unsigned32 (0 | 60..2147483647) | RC | |
column · Unsigned32 (0 | 60..2147483647) · read-create · current The value indicates the period in seconds, during which
cached reauthentication is allowed on the port. A value
of 0 signifies cached reauthentication period is not set.
| ||||
| ChpSwitchAutzUserRoleTaggedVlanList | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.16 | VidList | RC | |
column · VidList · read-create · current The set of tagged VLANs associated with this user-role. | ||||
| ShpSwitchAutzUserRoleDownloadedEnabled | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.4 | TruthValue | RW | |
scalar · TruthValue · read-write · current This object enables or disables the downlodable user role feature. The hpSwitchAutzUserRoleEnabled object should be enabled before configuring this object. | ||||
| ThpSwitchAutzUserRoleSubTable | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.5 | NA | ||
table · not-accessible · current A table of configured sub user roles attributes. The maximum number of entries is implementation dependent. | ||||
| RhpSwitchAutzUserRoleSubEntry | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.5.1 | NA | ||
row · not-accessible · current A user role sub table entry. | ||||
| ChpSwitchAutzUserRoleSubType | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.5.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current This object specifies the sub type of user-role attributes. Device or other specific type.
| ||||
| ChpSwitchAutzUserRoleAdminEdgePort | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.5.1.2 | TruthValue | RC | |
column · TruthValue · read-create · current The administrative value of the Edge Port parameter. A value of true(1) indicates that the port associated with this user-role should be assumed as an edge-port, and a value of false(2) indicates that the port associated with this user-role should be assumed as a non-edge-port. | ||||
| ChpSwitchAutzUserRolePoePriority | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.5.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current This object controls the priority of the port from the point of view of a power management algorithm. The priority that is set by this variable could be used by a control mechanism that prevents over current situations by disconnecting first ports with lower power priority. Ports that connect devices critical to the operation of the network - like the E911 telephones ports - should be set to higher priority.
| ||||
| ChpSwitchAutzUserRolePoeAllocBy | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.5.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current This object indicates the power allocation method for this port. The default value is usage.
| ||||
| ChpSwitchAutzUserRoleSubTypeRowStatus | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.5.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current The Row Status of this entry.
To create a new entry, send an SNMP SET request with a
RowStatus of 'createAndGo'.
active - the entry is ready to use.
notInService - not valid for this table.
notReady - the entry is not fully configured.
createAndGo - create a new entry. Entries of
hpSwitchAutzUserRoleType 'downloaded'
cannot be created or modified.
createAndWait - not valid for this table.
delete - delete the entry. Entries of
hpSwitchAutzUserRoleType 'predefined' and
the entry assigned to
hpSwitchAutzUserRoleInitialRoleName cannot
be deleted. | ||||
| ChpSwitchAutzUserRolePortMode | 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.5.1.7 | TruthValue | RC | |
column · TruthValue · read-create · current This object indicates if the auth method on a port will be operating on a port mode or not. | ||||
| NhpSwitchAuthorizationConformance | 1.3.6.1.4.1.11.2.14.11.5.1.32.2 | |||
| NhpSwitchAuthorizationMIBCompliances | 1.3.6.1.4.1.11.2.14.11.5.1.32.2.1 | |||
| MhpSwitchAuthorizationMIBCompliance | 1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.1 | |||
compliance · current The compliance statement for devices implementing the HP-AUTZ-MIB. | ||||
| MhpSwitchLocalMgmtPrivGrpMIBCompliance | 1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.2 | deprecated | ||
compliance · deprecated The compliance statement for listing the local management privilege methods to be tried for granting different access levels through various access tasks | ||||
| MhpSwitchLocalMgmtPrivGrpMIBCompliance1 | 1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.3 | deprecated | ||
compliance · deprecated The compliance statement for listing the local management privilege methods to be tried for granting different access levels through various access tasks | ||||
| MhpSwitchAuthorizationObjectsGrpMIBCompliance | 1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.4 | |||
compliance · current The compliance statement for listing the local management privilege methods to be tried for granting different access levels through various access tasks | ||||
| MhpSwitchAuthorizationNotificationGrpMIBCompliance | 1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.5 | |||
compliance · current The compliance statement for listing the local management privilege methods to be tried for granting different access levels through various access tasks | ||||
| MhpSwitchAutzRoleGrpCompliance | 1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.6 | deprecated | ||
| MhpSwitchAutzRoleGrpCompliance1 | 1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.7 | deprecated | ||
| MhpSwitchAutzRoleGrpCompliance2 | 1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.8 | deprecated | ||
| MhpSwitchAutzRoleGrpCompliance3 | 1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.9 | deprecated | ||
| MhpSwitchAutzRoleGrpCompliance4 | 1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.10 | deprecated | ||
| MhpSwitchLocalMgmtPrivGrpMIBCompliance2 | 1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.11 | |||
compliance · current The compliance statement for listing the local management privilege methods to be tried for granting different access levels through various access tasks | ||||
| MhpSwitchLocalMgmtPrivGrpMIBCompliance3 | 1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.12 | |||
compliance · current The compliance statement for listing the local management privilege methods to be tried for granting different access levels through various access tasks | ||||
| MhpSwitchAutzRoleGrpCompliance5 | 1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.13 | deprecated | ||
| MhpSwitchAutzRoleGrpCompliance6 | 1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.14 | |||
| NhpSwitchAuthorizationMIBGroups | 1.3.6.1.4.1.11.2.14.11.5.1.32.2.2 | |||
| GhpSwitchAuthorizationConfigGroup | 1.3.6.1.4.1.11.2.14.11.5.1.32.2.2.1 | |||
group · current A collection of objects to support authorization service. | ||||
| GhpicfSwitchAuthorizationNotificationGroup | 1.3.6.1.4.1.11.2.14.11.5.1.32.2.2.2 | |||
| GhpicfSwitchAuthorizationObjectsGroup | 1.3.6.1.4.1.11.2.14.11.5.1.32.2.2.3 | |||
group · current A group of switch authorization objects. | ||||
| GhpSwitchAutzLocalMgmtPrivGroup | 1.3.6.1.4.1.11.2.14.11.5.1.32.2.2.4 | |||
group · current A collection of objects for configuring Local Manangement Privilege Groups | ||||
| GhpSwitchAutzLocalMgmtPrivGroup1 | 1.3.6.1.4.1.11.2.14.11.5.1.32.2.2.5 | |||
group · current A collection of objects for configuring Local Mangement Privilege Groups | ||||
| GhpSwitchAutzUserRoleGroup | 1.3.6.1.4.1.11.2.14.11.5.1.32.2.2.6 | deprecated | ||
group · deprecated A collection of objects for supporting local user roles.
| ||||
| GhpSwitchAutzUserRoleGroup1 | 1.3.6.1.4.1.11.2.14.11.5.1.32.2.2.7 | deprecated | ||
group · deprecated A collection of objects for supporting local user roles.
| ||||
| GhpSwitchAutzUserRoleGroup2 | 1.3.6.1.4.1.11.2.14.11.5.1.32.2.2.8 | deprecated | ||
group · deprecated A collection of objects for supporting local user roles.
| ||||
| GhpSwitchAutzUserRoleGroup3 | 1.3.6.1.4.1.11.2.14.11.5.1.32.2.2.9 | deprecated | ||
group · deprecated A collection of objects for supporting local user roles.
| ||||
| GhpSwitchAutzUserRoleGroup4 | 1.3.6.1.4.1.11.2.14.11.5.1.32.2.2.10 | deprecated | ||
group · deprecated A collection of objects for supporting local user roles.
| ||||
| GhpSwitchAutzUserRoleGroup5 | 1.3.6.1.4.1.11.2.14.11.5.1.32.2.2.13 | deprecated | ||
group · deprecated A collection of objects for supporting local user roles.
| ||||
| GhpSwitchAutzUserRoleGroup6 | 1.3.6.1.4.1.11.2.14.11.5.1.32.2.2.14 | |||
group · current A collection of objects for supporting local user roles.
| ||||
Textual conventions
HpAutzUserRoleNameOCTET STRING (SIZE (1..63))Display hint:
63aUser role name type. All printable ASCII characters are allowed except '.', ' ', and '~'.
Traps / Notifications
- hpicfSwitchAuthServerFail
1.3.6.1.4.1.11.2.14.11.5.1.32.0.1
Groups and compliance
- hpSwitchAuthorizationConfigGroup
- hpSwitchAuthorizationMIBCompliance
- hpSwitchAuthorizationNotificationGrpMIBCompliance
- hpSwitchAuthorizationObjectsGrpMIBCompliance
- hpSwitchAutzLocalMgmtPrivGroup
- hpSwitchAutzLocalMgmtPrivGroup1
- hpSwitchAutzRoleGrpCompliance
- hpSwitchAutzRoleGrpCompliance1
- hpSwitchAutzRoleGrpCompliance2
- hpSwitchAutzRoleGrpCompliance3
- hpSwitchAutzRoleGrpCompliance4
- hpSwitchAutzRoleGrpCompliance5
- hpSwitchAutzRoleGrpCompliance6
- hpSwitchAutzUserRoleGroup
- hpSwitchAutzUserRoleGroup1
- hpSwitchAutzUserRoleGroup2
- hpSwitchAutzUserRoleGroup3
- hpSwitchAutzUserRoleGroup4
- hpSwitchAutzUserRoleGroup5
- hpSwitchAutzUserRoleGroup6
- hpSwitchLocalMgmtPrivGrpMIBCompliance
- hpSwitchLocalMgmtPrivGrpMIBCompliance1
- hpSwitchLocalMgmtPrivGrpMIBCompliance2
- hpSwitchLocalMgmtPrivGrpMIBCompliance3
- hpicfSwitchAuthorizationNotificationGroup
- hpicfSwitchAuthorizationObjectsGroup