BLADETYPE4-NETWORK-MIB
Hewlett-Packardsnmptranslate -m BLADETYPE4-NETWORK-MIB -Tpsnmpwalk -v2c -c <community> -m BLADETYPE4-NETWORK-MIB <host> 1.3.6.1.4.1.11.2.3.7.11.33.4.1.1Imports
| BRIDGE-MIB | BridgeId |
|---|---|
| HP-SWITCH-PL-MIB | hpSwitchBladeType4-Mgmt, hpSwitchBladeType4-Products |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-MIB | sysContact, sysLocation, sysName |
| SNMPv2-SMI | Bits, Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| NhpProLiant-GbE2c-InterconnectSwitch | 1.3.6.1.4.1.11.2.3.7.11.33.4.1.1 | |||
| Nagent | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1 | |||
| NagentConfig | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1 | |||
| NagSystem | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1 | |||
| SagApplyConfiguration | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is an action object to apply the changes made to configuration of the switch. By setting the value to apply(2), all the changes made since the last apply are written to the new_config block. other(1) is returned when this object ie read.
| ||||
| SagSavePending | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current This object, when read, gives the user information whether an save action is needed and that the configuration has been applied but not saved to the flash.
| ||||
| SagSaveConfiguration | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is an action object to write current configuration to nonvolatile storage. When issued with the saveActive, the active configuration in flash is saved to backup in flash and then the new configuration is saved to the active configuration in flash. When issued with notSaveActive, the active configuration is NOT saved to the flash and the active configuration is overwritten with the new configuration. ok(1) is returned always when read.
| ||||
| SagRevert | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is an action object to revert the unapplied changes made to the switch. By setting the value to revert(2), all the unapplied changes will be reverted. This action will copy the current_config to the new_config block. other(1) is returned when this object is read.
| ||||
| SagRevertApply | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is an action object to revert the unsaved changes made to the switch. By setting the value to revertApply(2), all the unsaved as well as unapplied changes will be reverted. other(1) is returned when this object is read.
| ||||
| SagReset | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is an action object to reboot the switch.
other(1) is returned always when read.
The following values are writable:
coldReset(2)...
warmReset(3)...
| ||||
| SagConfigForNxtReset | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current The configuration information to be loaded from at next reset.
The following values are writable:
active(2)...active configuration block
backup(3)...backup configuration block
default(4)..default configuration block
| ||||
| SagImageForNxtReset | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current The software image to be booted from at next reset.
The following values are writable:
image1(2)...image 1
image2(3)...image 2
| ||||
| SagSoftwareVersion | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.10 | DisplayString (SIZE (0..16)) | RO | |
scalar · DisplayString (SIZE (0..16)) · read-only · current The version of the software image that is currently running on the system in the form of 'major.minor.maintenance.bugfix'. A zero length string is returned if version is not available. | ||||
| SagBootVer | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.11 | DisplayString (SIZE (0..16)) | RO | |
scalar · DisplayString (SIZE (0..16)) · read-only · current The version of the boot code in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available. | ||||
| SagImage1Ver | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.12 | DisplayString (SIZE (0..128)) | RO | |
scalar · DisplayString (SIZE (0..128)) · read-only · current The version of the software image stored in image 1 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available or there is no valid software image. | ||||
| SagImage2Ver | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.13 | DisplayString (SIZE (0..128)) | RO | |
scalar · DisplayString (SIZE (0..128)) · read-only · current The version of the software image stored in image 2 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available or there is no valid software image. | ||||
| SagRtcDate | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.14 | DisplayString (SIZE (0..16)) | RW | |
scalar · DisplayString (SIZE (0..16)) · read-write · current The date on the real time clock in the form of 'mm/dd/yy'. A zero length string is returned if date is not available. | ||||
| SagRtcTime | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.15 | DisplayString (SIZE (0..16)) | RW | |
scalar · DisplayString (SIZE (0..16)) · read-write · current The time on the real time clock in the form of 'hh:mm:ss'. A zero length string is returned if time is not available. | ||||
| SagLastSetErrorReason | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.16 | DisplayString (SIZE (0..255)) | RO | |
scalar · DisplayString (SIZE (0..255)) · read-only · current The error reason of the last SET failure. | ||||
| SagCurCfgHttpServerPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.17 | INTEGER (1..65535) | RO | |
scalar · INTEGER (1..65535) · read-only · current The TCP port number that the HTTP server is listening to in the current_configuration block. | ||||
| SagNewCfgHttpServerPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.18 | INTEGER (1..65535) | RW | |
scalar · INTEGER (1..65535) · read-write · current The TCP port number that the HTTP server is listening to in the new_configuration block. | ||||
| SagCurCfgLoginBanner | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.19 | DisplayString (SIZE (0..79)) | RO | |
scalar · DisplayString (SIZE (0..79)) · read-only · current The user defined login banner. | ||||
| SagNewCfgLoginBanner | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.20 | DisplayString (SIZE (0..79)) | RW | |
scalar · DisplayString (SIZE (0..79)) · read-write · current The user defined login banner. | ||||
| SagCurCfgConsole | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.23 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable console output of syslog messages.
| ||||
| SagNewCfgConsole | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.24 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable console output of syslog messages.
| ||||
| SagCurCfgBootp | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.29 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable the use of BootP, as currently configured in the current_configuration block.
| ||||
| SagNewCfgBootp | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.30 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable the use of BootP, in the new_configuration block.
| ||||
| SagSlotNumber | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.31 | INTEGER (1..10) | RO | |
scalar · INTEGER (1..10) · read-only · current Identifies the slot in which this switch is installed. If the agent implementing this MIB is not a blade in a chassis this value has no meaning. | ||||
| SagCurCfgSnmpTimeout | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.32 | INTEGER (1..30) | RO | |
scalar · INTEGER (1..30) · read-only · current Once SNMP operations like agApplyConfig, agDiffState and agDumpState, which use the state machine are done the resources used by these operations need to be freed by setting the state back to 'idle' so others can issue the commands via SNMP. agSnmpTimeout indicates the number of minutes before the resources are freed and the state set back to 'idle' if this operation is not performed by the user. | ||||
| SagNewCfgSnmpTimeout | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.33 | INTEGER (1..30) | RW | |
scalar · INTEGER (1..30) · read-write · current Once SNMP operations like agApplyConfig, agDiffState and agDumpState, which use the state machine are done the resources used by these operations need to be freed by setting the state back to 'idle' so others can issue the commands via SNMP. agSnmpTimeout indicates the number of minutes before the resources are freed and the state set back to 'idle' if this operation is not performed by the user. | ||||
| SagCurCfgTelnetServerPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.34 | INTEGER (1..65535) | RO | |
scalar · INTEGER (1..65535) · read-only · current The TCP port number that the telnet server listens for telnet sessions. | ||||
| SagNewCfgTelnetServerPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.35 | INTEGER (1..65535) | RW | |
scalar · INTEGER (1..65535) · read-write · current The TCP port number that the telnet server listens for telnet sessions. | ||||
| SagClearFlashDump | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.36 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is an action object to clear the FLASH dump. ok(1) is returned when this object is read.
| ||||
| SagRackId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.37 | DisplayString (SIZE (0..127)) | RO | |
scalar · DisplayString (SIZE (0..127)) · read-only · current The rack unique identifier. | ||||
| SagChassis | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.38 | DisplayString (SIZE (0..127)) | RO | |
scalar · DisplayString (SIZE (0..127)) · read-only · current Chassis serial number. | ||||
| SagCurCfgTftpServerPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.39 | INTEGER (1..65535) | RO | |
scalar · INTEGER (1..65535) · read-only · current The TCP port number that the TFTP server is listening to in the current_configuration block. | ||||
| SagNewCfgTftpServerPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.40 | INTEGER (1..65535) | RW | |
scalar · INTEGER (1..65535) · read-write · current The TCP port number that the TFTP server is listening to in the new_configuration block. | ||||
| SagCurCfgHttpsServerPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.49 | INTEGER (1..65535) | RO | |
scalar · INTEGER (1..65535) · read-only · current The TCP port number that the HTTPS server is listening to in the current_configuration block. | ||||
| SagNewCfgHttpsServerPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.50 | INTEGER (1..65535) | RW | |
scalar · INTEGER (1..65535) · read-write · current The TCP port number that the HTTPS server is listening to in the new_configuration block. | ||||
| SagCurDaylightSavings | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.51 | INTEGER | RO | |
scalar · INTEGER · read-only · current The daylight savings location.
| ||||
| SagNewDaylightSavings | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.52 | INTEGER | RW | |
scalar · INTEGER · read-write · current The daylight savings location.
| ||||
| SagCfgSysDlight | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.53 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/disable daylight savings time.
| ||||
| SagCurCfgIdleCLITimeout | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.55 | Integer32 | RO | |
scalar · Integer32 · read-only · current Set idle CLI sessions timeout. | ||||
| SagNewCfgIdleCLITimeout | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.56 | Integer32 | RW | |
scalar · Integer32 · read-write · current Set idle CLI sessions timeout. | ||||
| SagCurCfgUfdTrap | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.57 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current status of the UFDFO SNMP trap.
| ||||
| SagNewCfgUfdTrap | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.58 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable sending UFDFO SNMP trap.
| ||||
| SagCurCfgReminders | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.59 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current status of reminders feature.
| ||||
| SagNewCfgReminders | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.60 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable reminders feature.
| ||||
| SagCurBootNxtCliMode | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.66 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current boot mode.
| ||||
| SagNewBootNxtCliMode | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.67 | INTEGER | RW | |
scalar · INTEGER · read-write · current Next cli boot mode.
| ||||
| SagCurCfgDhcp | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.70 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable the use of DHCP, as currently configured in the current_configuration block.
| ||||
| SagNewCfgDhcp | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.71 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable the use of DHCP, in the new_configuration block.
| ||||
| SagCfgL3Status | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.72 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current status of L3 feature.
| ||||
| SagCurCfgHprompt | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.73 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current status of hprompt.
| ||||
| SagNewCfgHprompt | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.75 | INTEGER | RW | |
scalar · INTEGER · read-write · current New status of hpprompt.
| ||||
| SagCurCfgLoginNotice | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.76 | DisplayString | RO | |
scalar · DisplayString · read-only · current The user defined login notice. | ||||
| SagNewCfgLoginNotice | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.77 | DisplayString | RW | |
scalar · DisplayString · read-write · current The user defined login notice. | ||||
| SagCurBootNxtCliModePrompt | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.78 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current status of selectable CLI mode prompt.
| ||||
| SagNewBootNxtCliModePrompt | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.79 | INTEGER | RW | |
scalar · INTEGER · read-write · current Next status of selectable CLI mode prompt.
| ||||
| SagCurCfgOldDst | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.82 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable system DST for US.
| ||||
| SagNewCfgOldDst | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.83 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable system DST for US.
| ||||
| SagHavePanicDump | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.84 | INTEGER | RO | |
scalar · INTEGER · read-only · current This object, when read, gives the user the information whether a panic dump exist in flash.
| ||||
| NagPortConfig | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2 | |||
| SagPortTableMaxEnt | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the port configuration host table. | ||||
| TagPortCurCfgTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2 | NA | ||
table · not-accessible · current The table of port configuration in the current_configuration block. | ||||
| RagPortCurCfgTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1 | NA | ||
row · not-accessible · current A row in the port table in the current_configuration block.
| ||||
| CagPortCurCfgIndx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the row in port configurations table. | ||||
| CagPortCurCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current This is the state of the port.
| ||||
| CagPortCurCfgVlanTag | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current This is VLAN tag state of the port
| ||||
| CagPortCurCfgRmon | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current This object is used to turn RMON on or off on the port.
| ||||
| CagPortCurCfgPVID | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.6 | INTEGER (1..4095) | RO | |
column · INTEGER (1..4095) · read-only · current The default VLAN ID for the port. | ||||
| CagPortCurCfgGigEthAutoNeg | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current This object is used to turn the autonegotiation on or off for gigabit Ethernet connection.
| ||||
| CagPortCurCfgGigEthSpeed | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current Selects the port speed for gigabit Ethernet connection.
| ||||
| CagPortCurCfgGigEthMode | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current This object is used to select port mode for gigabit Ethernet connection.
| ||||
| CagPortCurCfgGigEthFctl | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.14 | INTEGER | RO | |
column · INTEGER · read-only · current This object is used to select port flow control for gigabit Ethernet connection.
| ||||
| CagPortCurCfgPortName | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.15 | DisplayString (SIZE (0..65)) | RO | |
column · DisplayString (SIZE (0..65)) · read-only · current The switch port name. | ||||
| CagPortCurCfgLinkTrap | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.18 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise.
| ||||
| CagPortCurCfgTagPVID | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.19 | INTEGER | RO | |
column · INTEGER · read-only · current This is PVID tag state of the port
| ||||
| CagPortCurCfgMulticastThreshold | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.20 | INTEGER | RO | |
column · INTEGER · read-only · current Current status of the port's Multicast Threshold.
| ||||
| CagPortCurCfgMulticastThresholdRate | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.21 | INTEGER (0..262143) | RO | |
column · INTEGER (0..262143) · read-only · current Current port's Multicast Threshold Rate. | ||||
| CagPortCurCfgBroadcastThreshold | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.22 | INTEGER | RO | |
column · INTEGER · read-only · current Current status of the port's Broadcast Threshold.
| ||||
| CagPortCurCfgBroadcastThresholdRate | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.23 | INTEGER (0..262143) | RO | |
column · INTEGER (0..262143) · read-only · current Current port's Broadcast Threshold Rate. | ||||
| CagPortCurCfgDLFThreshold | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.24 | INTEGER | RO | |
column · INTEGER · read-only · current Current status of the port's Destination Lookup Fail Threshold.
| ||||
| CagPortCurCfgDLFThresholdRate | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.25 | INTEGER (0..262143) | RO | |
column · INTEGER (0..262143) · read-only · current Current port's Destination Lookup Fail Threshold Rate. | ||||
| CagPortCurCfgPortMedia | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.26 | INTEGER | RO | |
column · INTEGER · read-only · current The switch port media.
| ||||
| CagPortCurCfgPortMediat | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.27 | INTEGER | RO | |
column · INTEGER · read-only · current The switch port media.
| ||||
| CagPortCurCfgType | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.28 | DisplayString (SIZE (0..65)) | RO | |
column · DisplayString (SIZE (0..65)) · read-only · current The switch port type. | ||||
| TagPortNewCfgTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3 | NA | ||
table · not-accessible · current The table of port configuration in the new_configuration block. | ||||
| RagPortNewCfgTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1 | NA | ||
row · not-accessible · current A row in the port configuration table in the new_configuration block.
| ||||
| CagPortNewCfgIndx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the row in port configurations table. | ||||
| CagPortNewCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current This is the state of the port.
| ||||
| CagPortNewCfgVlanTag | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current This is VLAN tag state of the port
| ||||
| CagPortNewCfgRmon | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to turn RMON on or off on the port.
| ||||
| CagPortNewCfgPVID | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.6 | INTEGER (1..4095) | RW | |
column · INTEGER (1..4095) · read-write · current The default VLAN ID for the port. | ||||
| CagPortNewCfgGigEthAutoNeg | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to turn the autonegotiation on or off for gigabit Ethernet connection.
| ||||
| CagPortNewCfgGigEthSpeed | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.12 | INTEGER | RW | |
column · INTEGER · read-write · current Selects the port speed for gigabit Ethernet connection.
| ||||
| CagPortNewCfgGigEthMode | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to select port mode for gigabit Ethernet connection.
| ||||
| CagPortNewCfgGigEthFctl | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.14 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to select port flow control for gigabit Ethernet connection.
| ||||
| CagPortNewCfgPortName | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.15 | DisplayString (SIZE (0..65)) | RW | |
column · DisplayString (SIZE (0..65)) · read-write · current The switch port name. | ||||
| CagPortNewCfgLinkTrap | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.18 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise.
| ||||
| CagPortNewCfgTagPVID | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.19 | INTEGER | RW | |
column · INTEGER · read-write · current This is PVID tag state of the port
| ||||
| CagPortNewCfgMulticastThreshold | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.20 | INTEGER | RW | |
column · INTEGER · read-write · current New status of the port's Multicast Threshold.
| ||||
| CagPortNewCfgMulticastThresholdRate | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.21 | INTEGER (0..262143) | RW | |
column · INTEGER (0..262143) · read-write · current New port's Multicast Threshold Rate. | ||||
| CagPortNewCfgBroadcastThreshold | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.22 | INTEGER | RW | |
column · INTEGER · read-write · current New status of the port's Broadcast Threshold.
| ||||
| CagPortNewCfgBroadcastThresholdRate | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.23 | INTEGER (0..262143) | RW | |
column · INTEGER (0..262143) · read-write · current New port's Broadcast Threshold Rate. | ||||
| CagPortNewCfgDLFThreshold | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.24 | INTEGER | RW | |
column · INTEGER · read-write · current New status of the port's Destination Lookup Fail Threshold.
| ||||
| CagPortNewCfgDLFThresholdRate | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.25 | INTEGER (0..262143) | RW | |
column · INTEGER (0..262143) · read-write · current New port's Destination Lookup Fail Threshold Rate. | ||||
| CagPortNewCfgPortMedia | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.26 | INTEGER | RW | |
column · INTEGER · read-write · current New status of the port's Media.
| ||||
| CagPortNewCfgPortMediat | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.27 | INTEGER | RW | |
column · INTEGER · read-write · current New status of the port's Media.
| ||||
| CagPortNewCfgType | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.28 | DisplayString (SIZE (0..65)) | RO | |
column · DisplayString (SIZE (0..65)) · read-only · current The switch port type. | ||||
| NagRadiusConfig | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3 | |||
| SradCurCfgPrimaryIpAddr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.1 | IpAddress | RO | |
scalar · IpAddress · read-only · current The IP address of the Primary RADIUS server. | ||||
| SradNewCfgPrimaryIpAddr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.2 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP address of the Primary RADIUS server. | ||||
| SradCurCfgSecondaryIpAddr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.3 | IpAddress | RO | |
scalar · IpAddress · read-only · current The IP address of the Secondary RADIUS server. | ||||
| SradNewCfgSecondaryIpAddr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.4 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP address of the Secondary RADIUS server. | ||||
| SradCurCfgPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.5 | INTEGER (1500..3000) | RO | |
scalar · INTEGER (1500..3000) · read-only · current Specify the RADIUS port number. | ||||
| SradNewCfgPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.6 | INTEGER (1500..3000) | RW | |
scalar · INTEGER (1500..3000) · read-write · current Speicfy the RADIUS port number. | ||||
| SradCurCfgTimeout | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.7 | INTEGER (1..10) | RO | |
scalar · INTEGER (1..10) · read-only · current The maximum number of seconds before resending authentication to RADIUS server. | ||||
| SradNewCfgTimeout | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.8 | INTEGER (1..10) | RW | |
scalar · INTEGER (1..10) · read-write · current The maximum number of seconds before resending authentication to RADIUS server. | ||||
| SradCurCfgRetries | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.9 | INTEGER (1..3) | RO | |
scalar · INTEGER (1..3) · read-only · current Number of retries to the RADIUS server. | ||||
| SradNewCfgRetries | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.10 | INTEGER (1..3) | RW | |
scalar · INTEGER (1..3) · read-write · current Number of retries to the RADIUS server. | ||||
| SradCurCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.11 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable RADIUS authentication.
| ||||
| SradNewCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable RADIUS authentication.
| ||||
| SradCurCfgAuthenString | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.13 | DisplayString (SIZE (0..32)) | RO | |
scalar · DisplayString (SIZE (0..32)) · read-only · current The RADIUS authentication string. | ||||
| SradNewCfgAuthenString | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.14 | DisplayString (SIZE (0..32)) | RW | |
scalar · DisplayString (SIZE (0..32)) · read-write · current The RADIUS authentication string. | ||||
| SradCurCfgBackdoor | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.15 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable RADIUS backdoor for telnet/ssh/http/https.
| ||||
| SradNewCfgBackdoor | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.16 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable RADIUS backdoor for telnet/ssh/http/https.
| ||||
| SradCurCfgAuthenSecondString | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.17 | DisplayString (SIZE (0..32)) | RO | |
scalar · DisplayString (SIZE (0..32)) · read-only · current The second RADIUS authentication string. | ||||
| SradNewCfgAuthenSecondString | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.18 | DisplayString (SIZE (0..32)) | RW | |
scalar · DisplayString (SIZE (0..32)) · read-write · current The second RADIUS authentication string. | ||||
| SradCurCfgSecBd | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.19 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable RADIUS secure backdoor for telnet.
| ||||
| SradNewCfgSecBd | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.20 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable RADIUS secure backdoor for telnet.
| ||||
| NagNTP | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.4 | |||
| SagCurCfgNTPServer | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.4.1 | IpAddress | RO | |
scalar · IpAddress · read-only · current The NTP Server Address. | ||||
| SagNewCfgNTPServer | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.4.2 | IpAddress | RW | |
scalar · IpAddress · read-write · current The NTP Server Address. | ||||
| SagCurCfgNTPResyncInterval | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.4.3 | INTEGER (1..44640) | RO | |
scalar · INTEGER (1..44640) · read-only · current The NTP Server resync interval in minutes. | ||||
| SagNewCfgNTPResyncInterval | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.4.4 | INTEGER (1..44640) | RW | |
scalar · INTEGER (1..44640) · read-write · current The NTP Server resync interval in minutes. | ||||
| SagCurCfgNTPService | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.4.9 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable/disable NTP Service.
| ||||
| SagNewCfgNTPService | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.4.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/disable NTP Service.
| ||||
| SagCurCfgNTPSecServer | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.4.11 | IpAddress | RO | |
scalar · IpAddress · read-only · current The Secondary NTP Server Address. | ||||
| SagNewCfgNTPSecServer | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.4.12 | IpAddress | RW | |
scalar · IpAddress · read-write · current The Secondary NTP Server Address. | ||||
| NagSyslog | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5 | |||
| SagCurCfgSyslogHost | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.1 | IpAddress | RO | |
scalar · IpAddress · read-only · current The syslog host IP address, as currently configured in the current_configuration block. | ||||
| SagNewCfgSyslogHost | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.2 | IpAddress | RW | |
scalar · IpAddress · read-write · current The syslog host IP address, in the new_configuration block. | ||||
| SagCurCfgSyslog2Host | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.3 | IpAddress | RO | |
scalar · IpAddress · read-only · current The second syslog host IP address, as currently configured in the current_configuration block. | ||||
| SagNewCfgSyslog2Host | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.4 | IpAddress | RW | |
scalar · IpAddress · read-write · current The second syslog host IP address, in the new_configuration block. | ||||
| SagCurCfgSyslogFac | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current The facility of syslog host in the current_configuration block.
| ||||
| SagNewCfgSyslogFac | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current The facility of syslog host in the new_configuration block.
| ||||
| SagCurCfgSyslog2Fac | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current The facility of syslog2 host in the current_configuration block.
| ||||
| SagNewCfgSyslog2Fac | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current The facility of syslogs host in the new_configuration block.
| ||||
| SagClrSyslogMsgs | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current Clears all current Syslog messages.
| ||||
| SagSyslogMsgTableMaxSize | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.10 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the syslog message table. | ||||
| TagSyslogMsgTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.11 | NA | ||
table · not-accessible · current The table of syslog messages. | ||||
| RagSyslogMsgTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.11.1 | NA | ||
| CagSyslogMsgIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.11.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The syslog message table index. | ||||
| CagSyslogMessage | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.11.1.2 | DisplayString (SIZE (0..128)) | RO | |
column · DisplayString (SIZE (0..128)) · read-only · current The syslog message. | ||||
| NagLog | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12 | |||
| SagNewCfgSyslogTrapConsole | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable console syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapConsole | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable console syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapSystem | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable system level syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapSystem | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable system level syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapMgmt | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable management(flash, config, login) syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapMgmt | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.6 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable management(flash, config, login) syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapCli | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable CLI generated error syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapCli | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.8 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable CLI generated error syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapStg | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable spanning tree syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapStg | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.10 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable spanning tree syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapVlan | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.11 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable VLAN syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapVlan | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.12 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable VLAN syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapSsh | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.19 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable SSH, RADIUS syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapSsh | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.20 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable SSH, RADIUS syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapVrrp | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.21 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable VRRP syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapVrrp | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.22 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable VRRP syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapNtp | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.25 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable NTP syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapNtp | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.26 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable NTP syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapIp | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.31 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable IP related syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapIp | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.32 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable IP related syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapWeb | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.35 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable WEBUI related syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapWeb | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.36 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable WEBUI related syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapOspf | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.41 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable OSPF related syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapOspf | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.42 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable OSPF related syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapRmon | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.45 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable rmon related syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapRmon | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.46 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable rmon related syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapUfd | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.47 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable UFD related syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapUfd | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.48 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable UFD related syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapCfg | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.49 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable CFG related syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapCfg | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.50 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable CFG related syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrap8021x | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.51 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable 802.1 related syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrap8021x | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.52 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable 802.1 related syslog and SNMP trap, in the new_configuration block.
| ||||
| SagNewCfgSyslogTrapAll | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.55 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable all syslog and SNMP traps, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapAll | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.56 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable all syslog and SNMP traps, as currently configured in the current_configuration block.
| ||||
| SagCurCfgSyslogSev | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.13 | INTEGER | RO | |
scalar · INTEGER · read-only · current The severity of syslog host in the current configuration block.
| ||||
| SagNewCfgSyslogSev | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.14 | INTEGER | RW | |
scalar · INTEGER · read-write · current The severity of syslog host in the new configuration block.
| ||||
| SagCurCfgSyslog2Sev | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.15 | INTEGER | RO | |
scalar · INTEGER · read-only · current The severity of syslog2 host in the current configuration block.
| ||||
| SagNewCfgSyslog2Sev | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.16 | INTEGER | RW | |
scalar · INTEGER · read-write · current The severity of syslogs host in the new configuration block.
| ||||
| NagTransfer | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.7 | |||
| SagTransferServer | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.7.1 | DisplayString (SIZE (0..64)) | RW | |
scalar · DisplayString (SIZE (0..64)) · read-write · current The FTP/TFTP server IP address or domain name. | ||||
| SagTransferImage | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.7.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Whether the image file should be loaded in image1 or image2 or boot in flash.
| ||||
| SagTransferImageFileName | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.7.3 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current The image file name to be downloaded. | ||||
| SagTransferCfgFileName | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.7.4 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current The configuration file name. | ||||
| SagTransferDumpFileName | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.7.5 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current The core dump file name. | ||||
| SagTransferAction | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.7.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is an action object to perform various FTP/TFTP Get or Put functions.
The FTP/TFTP sever is specified in agTransferServer object.
img-get(2) - Download switch image from a specified image
file(agTransferImageFileName) on the FTP/TFTP server to
the destinated storage(agTransferImage).
cfg-get(3) - Download switch configuration from a specified
file(agTransferCfgFileName) on the FTP/TFTP server.
cfg-put(4) - Upload switch configuration to a specified
file(agTransferCfgFileName) on the FTP/TFTP server.
dump-put(5)- Download switch core dump to a specified
file(agTransferDumpFileName) on the FTP/TFTP server.
img-put(7) - Upload specified switch image to a specified image
file(agTransferImageFileName) on the FTP/TFTP server.
tsdump-put(5)- Download switch core dump to a specified
file (agTransferTSDumpFileName) on the FTP/TFTP server.
other(1) is returned always when read.
| ||||
| SagTransferLastActionStatus | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.7.7 | DisplayString (SIZE (0..128)) | RO | |
scalar · DisplayString (SIZE (0..128)) · read-only · current The recorded status of the previous FTP/TFTP activity. | ||||
| SagTransferUserName | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.7.9 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current The username for FTP server or blank for TFTP server. | ||||
| SagTransferPassword | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.7.10 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current The password for FTP server. | ||||
| SagTransferTSDumpFileName | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.7.11 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current The TS dump file name. | ||||
| SagTransferLastConfigurationActionStatus | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.7.14 | INTEGER | RO | |
scalar · INTEGER · read-only · current The status of the last configuration action using the file ftp/tftp'd from the server.
| ||||
| NagApply | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.8 | |||
| SagApplyPending | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.8.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current This object, when read, gives the user information whether an apply action is needed and that the configuration has been chaged by the user actions. The user then can apply the changes by setting proper value to the object agApplyConfiguration described above.
| ||||
| SagApplyConfig | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.8.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current When this object is read the current state is returned.
idle(3) indicates that there is no apply in progess.
complete(5) indicates that the last apply operation is completed.
Setting the value to apply(1), will write all the changes made
since the last apply to the current configuration block.
If the apply is successful this variable will return the state
'complete' else it will return 'failed'. In case of failure,
to read the reason for failure use the agApplyTable.
| ||||
| SagApplyTableSize | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.8.4 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of strings in the apply table. | ||||
| TagApplyTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.8.5 | NA | ||
table · not-accessible · current The table of URL path for URL load balancing in the current_config. | ||||
| RagApplyTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.8.5.1 | NA | ||
row · not-accessible · current Information about an URL path for URL load balancing.
| ||||
| CagApplyIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.8.5.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The table index. | ||||
| CagApplyString | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.8.5.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current A string in the apply table. | ||||
| NagTacacsConfig | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10 | |||
| StacCurCfgPrimaryIpAddr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.1 | IpAddress | RO | |
scalar · IpAddress · read-only · current The IP address of the Primary TACACS+ server. | ||||
| StacNewCfgPrimaryIpAddr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.2 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP address of the Primary TACACS+ server. | ||||
| StacCurCfgSecondaryIpAddr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.3 | IpAddress | RO | |
scalar · IpAddress · read-only · current The IP address of the Secondary TACSACS server. | ||||
| StacNewCfgSecondaryIpAddr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.4 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP address of the Secondary TACACS+ server. | ||||
| StacCurCfgPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.5 | INTEGER (1..65000) | RO | |
scalar · INTEGER (1..65000) · read-only · current Specify the TACACS+ port number. | ||||
| StacNewCfgPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.6 | INTEGER (1..65000) | RW | |
scalar · INTEGER (1..65000) · read-write · current Specify the TACACS+ port number. | ||||
| StacCurCfgTimeout | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.7 | INTEGER (4..15) | RO | |
scalar · INTEGER (4..15) · read-only · current The maximum number of seconds before resending authentication to TACACS+ server. | ||||
| StacNewCfgTimeout | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.8 | INTEGER (4..15) | RW | |
scalar · INTEGER (4..15) · read-write · current The maximum number of seconds before resending authentication to TACACS+ server. | ||||
| StacCurCfgRetries | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.9 | INTEGER (1..3) | RO | |
scalar · INTEGER (1..3) · read-only · current Number of retries to the TACACS+ server. | ||||
| StacNewCfgRetries | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.10 | INTEGER (1..3) | RW | |
scalar · INTEGER (1..3) · read-write · current Number of retries to the TACACS+ server. | ||||
| StacCurCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.11 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable TACACS+ authentication.
| ||||
| StacNewCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable TACACS+ authentication.
| ||||
| StacCurCfgAuthenString | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.13 | DisplayString (SIZE (0..32)) | RO | |
scalar · DisplayString (SIZE (0..32)) · read-only · current The TACACS+ authentication string. | ||||
| StacNewCfgAuthenString | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.14 | DisplayString (SIZE (0..32)) | RW | |
scalar · DisplayString (SIZE (0..32)) · read-write · current The TACACS+ authentication string. | ||||
| StacCurCfgBackdoor | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.15 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable TACACS+ backdoor for telnet/ssh/http/https.
| ||||
| StacNewCfgBackdoor | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.16 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable TACACS+ backdoor for telnet/ssh/http/https.
| ||||
| StacCurCfgAuthenSecondString | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.17 | DisplayString (SIZE (0..32)) | RO | |
scalar · DisplayString (SIZE (0..32)) · read-only · current The second TACACS+ authentication string. | ||||
| StacNewCfgAuthenSecondString | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.18 | DisplayString (SIZE (0..32)) | RW | |
scalar · DisplayString (SIZE (0..32)) · read-write · current The second TACACS+ authentication string. | ||||
| StacCurCfgCmdAuthor | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.19 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable TACACS+ command authorization.
| ||||
| StacNewCfgCmdAuthor | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.20 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable TACACS+ command authorization.
| ||||
| StacCurCfgCmdLogging | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.21 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable TACACS+ command logging.
| ||||
| StacNewCfgCmdLogging | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.22 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable TACACS+ command logging.
| ||||
| StacCurCfgSecBd | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.23 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable TACACS+ secure backdoor for telnet.
| ||||
| StacNewCfgSecBd | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.24 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable TACACS+ secure backdoor for telnet.
| ||||
| StacCurCfgCmap | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.25 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable/Disable Tacacs+ new prividlege level maping.
| ||||
| StacNewCfgCmap | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.26 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/Disable Tacacs+ new prividlege level maping.
| ||||
| TagTacacsUserMapCurCfgTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.31 | NA | ||
table · not-accessible · current The table of tacacs+ user map current configuration. | ||||
| RagTacacsUserMapCurCfgTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.31.1 | NA | ||
| CagTacacsUserMapCurCfgUId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.31.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The current config remote privilege identifier. | ||||
| CagTacacsUserMapCurCfgMapping | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.31.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Current Tacacs+ user privilege mappings.
| ||||
| TagTacacsUserMapNewCfgTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.32 | NA | ||
table · not-accessible · current The table of tacacs+ user map new configuration. | ||||
| RagTacacsUserMapNewCfgTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.32.1 | NA | ||
| CagTacacsUserMapNewCfgUId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.32.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The new config remote privilege identifier. | ||||
| CagTacacsUserMapNewCfgMapping | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.32.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current Set new Tacacs+ user privilege mappings.
| ||||
| NagMgmtNetConfig | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11 | |||
| SagMgmtNetTableMaxSize | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of entries in the Management Network Table. | ||||
| TagCurCfgMgmtNetTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.2 | NA | ||
table · not-accessible · current The table for Management Network definitions in the current configuration block. | ||||
| RagCurCfgMgmtNetEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.2.1 | NA | ||
row · not-accessible · current A row in the management network definition table.
| ||||
| CagCurCfgMgmtNetIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the Management Network Definition table. | ||||
| CagCurCfgMgmtNetSubnet | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.2.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The Management Network Address in the current_configuration block. | ||||
| CagCurCfgMgmtNetMask | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.2.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The Management Network Mask in the current_configuration block. | ||||
| TagNewCfgMgmtNetTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.3 | NA | ||
table · not-accessible · current The table for Management Network definitions in the new configuration block. | ||||
| RagNewCfgMgmtNetEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.3.1 | NA | ||
row · not-accessible · current A row in the management network definition table.
| ||||
| CagNewCfgMgmtNetIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the Management Network Definition table. | ||||
| CagNewCfgMgmtNetSubnet | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.3.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The Management Network Address in the new_configuration block. | ||||
| CagNewCfgMgmtNetMask | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.3.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current The Management Network Mask in the new_configuration block. | ||||
| CagNewCfgMgmtNetDelete | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.3.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current By setting the value to delete(2), the entire row is deleted.
| ||||
| SagMgmtNetClear | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current By setting the value to delete(2), the entire table is cleared.
| ||||
| NagAccess | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12 | |||
| SagAccessUserMaxUserID | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of Users ID. | ||||
| TagAccessUserCurCfgTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.2 | NA | ||
table · not-accessible · current The table of Access user configuration. | ||||
| RagAccessUserCurCfgTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.2.1 | NA | ||
row · not-accessible · current A row in the Access user configuration table. | ||||
| CagAccessUserCurCfgUId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The User identifier. | ||||
| CagAccessUserCurCos | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The user class of service.
| ||||
| CagAccessUserCurCfgName | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.2.1.3 | DisplayString (SIZE (0..8)) | RO | |
column · DisplayString (SIZE (0..8)) · read-only · current The user name. | ||||
| CagAccessUserCurCfgPswd | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.2.1.4 | DisplayString (SIZE (0..128)) | RO | |
column · DisplayString (SIZE (0..128)) · read-only · current The character string representing the user passworde. | ||||
| CagAccessUserCurCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.2.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable a user.
| ||||
| TagAccessUserNewCfgTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.3 | NA | ||
table · not-accessible · current The table of Access user configuration. | ||||
| RagAccessUserNewCfgTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.3.1 | NA | ||
row · not-accessible · current A row in the Access user configuration table. | ||||
| CagAccessUserNewCfgUId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The User identifier. | ||||
| CagAccessUserNewCos | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.3.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current The user class of service.
| ||||
| CagAccessUserNewCfgName | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.3.1.3 | DisplayString (SIZE (0..8)) | RC | |
column · DisplayString (SIZE (0..8)) · read-create · current The user name. | ||||
| CagAccessUserNewCfgPswd | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.3.1.4 | DisplayString (SIZE (0..128)) | RC | |
column · DisplayString (SIZE (0..128)) · read-create · current The character string representing the user passworde. | ||||
| CagAccessUserNewCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.3.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable a user.
| ||||
| CagAccessUserNewCfgDelete | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.3.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current This is an action object to create or delete a User. other(1) is returned always when read. The following values are writable: delete(2)...to delete a User
| ||||
| NagSSHConfig | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13 | |||
| SsshCurCfgIntrval | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13.1 | INTEGER (0..24) | RO | |
scalar · INTEGER (0..24) · read-only · current Interval for generating the RSA server key. | ||||
| SsshNewCfgIntrval | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13.2 | INTEGER (0..24) | RW | |
scalar · INTEGER (0..24) · read-write · current Set Interval for generating the RSA server key. | ||||
| SsshCurCfgScpAdm | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13.3 | DisplayString (SIZE (0..128)) | RO | |
scalar · DisplayString (SIZE (0..128)) · read-only · current SCP-only admin password. | ||||
| SsshNewCfgScpAdm | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13.4 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current Set SCP-only admin password. | ||||
| SsshNewCfgHKeyGen | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is an action object to generate the RSA host key. other(2) is returned always when read. The following values are writable: generate(1).. Generate the RSA host key.
| ||||
| SsshNewCfgSKeyGen | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is an action object to generate the RSA server key. other(2) is returned always when read. The following values are writable: generate(1).. Generate the RSA server key.
| ||||
| SsshCurCfgSSHPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13.7 | INTEGER (1..65535) | RO | |
scalar · INTEGER (1..65535) · read-only · current SSH server port number. | ||||
| SsshNewCfgSSHPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13.8 | INTEGER (1..65535) | RW | |
scalar · INTEGER (1..65535) · read-write · current Set SSH server port number. | ||||
| SsshCurCfgScpApplySave | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13.9 | INTEGER | RO | |
scalar · INTEGER · read-only · current SCP apply and save.
| ||||
| SsshNewCfgScpApplySave | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/Disable the SCP apply and save.
| ||||
| SsshCurCfgStatus | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13.11 | INTEGER | RO | |
scalar · INTEGER · read-only · current SSH server status.
| ||||
| SsshNewCfgStatus | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current Turn SSH server ON/OFF.
| ||||
| NagentStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2 | |||
| NpktStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.1 | |||
| SpktStatsAllocs | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.1.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total number of packet allocations from the packet buffer pool by the TCP/IP protocol stack. | ||||
| SpktStatsFrees | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.1.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total number of times the packet buffers are freed(released) to the packet buffer pool by the TCP/IP protocol stack. | ||||
| SpktStatsAllocFails | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.1.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total number of packet allocation failures from the packet buffer pool by the TCP/IP protocol stack. | ||||
| SpktStatsMediums | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.1.4 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current Total number of packet allocations with size greater than 128 bytes and less than or equal to 1536 bytes from the packet buffer pool by the TCP/IP protocol stack. | ||||
| SpktStatsJumbos | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.1.5 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current Total number of packet allocations with size larger than 1536 bytes from the packet buffer pool by the TCP/IP protocol stack. | ||||
| SpktStatsSmalls | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.1.6 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current Total number of packet allocations with size less than or eqaul to 128 bytes from the packet buffer pool by the TCP/IP protocol stack. | ||||
| SpktStatsMediumsHiWatermark | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.1.7 | Counter32 | RO | |
scalar · Counter32 · read-only · current The highest number of packet allocations with size greater than 128 bytes and less than or equal to 1536 bytes from the packet buffer pool by the TCP/IP protocol stack. | ||||
| SpktStatsJumbosHiWatermark | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.1.8 | Counter32 | RO | |
scalar · Counter32 · read-only · current The highest number of packet allocations with size larger than 1536 bytes from the packet buffer pool by the TCP/IP protocol stack. | ||||
| SpktStatsSmallsHiWatermark | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.1.9 | Counter32 | RO | |
scalar · Counter32 · read-only · current The highest number of packet allocations with size less than or eqaul to 128 bytes from the packet buffer pool by the TCP/IP protocol stack. | ||||
| NmpCpuStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.2 | |||
| SmpCpuStatsUtil1Second | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.2.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The utilization of MP CPU over 1 second. It shows the percentage. | ||||
| SmpCpuStatsUtil4Seconds | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.2.2 | Integer32 | RO | |
scalar · Integer32 · read-only · current The utilization of MP CPU over 4 seconds. It shows the percentage. | ||||
| SmpCpuStatsUtil64Seconds | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.2.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current The utilization of MP CPU over 64 seconds. It shows the percentage. | ||||
| NportStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3 | |||
| TportStatsTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1 | NA | ||
table · not-accessible · current The table of port statistics. | ||||
| RportStatsTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1 | NA | ||
| CportStatsIndx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The port index. | ||||
| CportStatsPhyIfInOctets | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of octets received on the interface, including framing characters. | ||||
| CportStatsPhyIfInUcastPkts | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The number of subnetwork-unicast packets delivered to a higher-layer protocol. | ||||
| CportStatsPhyIfInNUcastPkts | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. | ||||
| CportStatsPhyIfInDiscards | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. | ||||
| CportStatsPhyIfInErrors | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. | ||||
| CportStatsPhyIfInUnknownProtos | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets received via the interface which were discarded because of an unknown or unsupported protocol. | ||||
| CportStatsPhyIfOutOctets | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of octets transmitted out of the interface, including framing characters. | ||||
| CportStatsPhyIfOutUcastPkts | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent. | ||||
| CportStatsPhyIfOutNUcastPkts | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent. | ||||
| CportStatsPhyIfOutDiscards | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. | ||||
| CportStatsPhyIfOutErrors | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current The number of outbound packets that could not be transmitted because of errors. | ||||
| CportStatsPhyIfOutQLen | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.13 | Gauge32 | RO | |
column · Gauge32 · read-only · current The length of the output packet queue (in packets). | ||||
| CportStatsPhyIfInBroadcastPkts | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.14 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. | ||||
| CportStatsPhyIfOutBroadcastPkts | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. | ||||
| CportStatsClear | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.16 | INTEGER | RW | |
column · INTEGER · read-write · current Setting this value to clear(1) clears the stats for this port.
| ||||
| CportStatsPhyIfInMulticastPkts | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.17 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. | ||||
| CportStatsPhyIfOutMulticastPkts | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.18 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. | ||||
| Tdot1xPortStatsTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2 | NA | ||
table · not-accessible · current The table of 802.1x port statistics. | ||||
| Rdot1xPortStatsTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1 | NA | ||
| Cdot1xPortStatsIndx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The 802.1x port stats index. | ||||
| CeapolFramesRx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.2 | Integer32 | RO | |
| CeapolFramesTx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.3 | Integer32 | RO | |
| CeapolStartFramesRx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.4 | Integer32 | RO | |
| CeapolLogoffFramesRx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.5 | Integer32 | RO | |
| CeapolRespIdFramesRx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.6 | Integer32 | RO | |
| CeapolRespFramesRx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.7 | Integer32 | RO | |
| CeapolReqIdFramesTx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.8 | Integer32 | RO | |
| CeapolReqFramesTx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.9 | Integer32 | RO | |
| CinvalidEapolFramesRx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.10 | Integer32 | RO | |
| CeapLengthErrorFramesRx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.11 | Integer32 | RO | |
| CauthEntersConnecting | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.12 | Integer32 | RO | |
| CauthEapLogoffsWhileConnecting | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.13 | Integer32 | RO | |
| CauthEntersAuthenticating | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.14 | Integer32 | RO | |
| CauthSuccessesWhileAuthenticating | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.15 | Integer32 | RO | |
| CauthTimeoutsWhileAuthenticating | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.16 | Integer32 | RO | |
| CauthFailWhileAuthenticating | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.17 | Integer32 | RO | |
| CauthReauthsWhileAuthenticating | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.18 | Integer32 | RO | |
| CauthEapStartsWhileAuthenticating | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.19 | Integer32 | RO | |
| CauthEapLogoffWhileAuthenticating | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.20 | Integer32 | RO | |
| CauthReauthsWhileAuthenticated | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.21 | Integer32 | RO | |
| CauthEapStartsWhileAuthenticated | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.22 | Integer32 | RO | |
| CauthEapLogoffWhileAuthenticated | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.23 | Integer32 | RO | |
| CbackendResponses | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.24 | Integer32 | RO | |
| CbackendAccessChallenges | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.25 | Integer32 | RO | |
| CbackendOtherRequestsToSupplicant | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.26 | Integer32 | RO | |
| CbackendNonNakResponsesFromSupplicant | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.27 | Integer32 | RO | |
| CbackendAuthSuccesses | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.28 | Integer32 | RO | |
| CbackendAuthFails | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.29 | Integer32 | RO | |
| ClastEapolFrameVersion | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.30 | Integer32 | RO | |
| ClastEapolFrameSource | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.31 | MacAddress | RO | |
| TallportsStatsTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3 | NA | ||
table · not-accessible · current The table of all ports statistics. | ||||
| RallportsStatsTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1 | NA | ||
| CallportsStatsIndx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The port number. | ||||
| CallportsStatsDescr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.2 | DisplayString (SIZE (0..5)) | RO | |
column · DisplayString (SIZE (0..5)) · read-only · current The port description. | ||||
| CallportsStatsSpeed | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The current operational speed of the port.
| ||||
| CallportsStatsPhysAddress | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.4 | PhysAddress | RO | |
column · PhysAddress · read-only · current The port MAC Address. | ||||
| CallportsStatsAdminStatus | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The port Admin state.
| ||||
| CallportsStatsOperStatus | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The port Operational Status.
| ||||
| CallportsStatsInOctets | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current Octets In for port. | ||||
| CallportsStatsOutOctets | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current Octets Out for port. | ||||
| CallportsStatsInPkts | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current Packets In for port. | ||||
| CallportsStatsOutPkts | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current Packets Out for port. | ||||
| CallportsStatsInUcast | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.11 | DisplayString (SIZE (0..20)) | RO | |
column · DisplayString (SIZE (0..20)) · read-only · current Unicast Packets In for port. | ||||
| CallportsStatsOutUcast | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.12 | DisplayString (SIZE (0..20)) | RO | |
column · DisplayString (SIZE (0..20)) · read-only · current Unicast Packets Out for port. | ||||
| CallportsStatsInBcast | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.13 | DisplayString (SIZE (0..20)) | RO | |
column · DisplayString (SIZE (0..20)) · read-only · current Broadcasts Packets In for port. | ||||
| CallportsStatsOutBcast | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.14 | DisplayString (SIZE (0..20)) | RO | |
column · DisplayString (SIZE (0..20)) · read-only · current Broadcasts Packets Out for port. | ||||
| CallportsStatsInMcast | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.15 | DisplayString (SIZE (0..20)) | RO | |
column · DisplayString (SIZE (0..20)) · read-only · current Multicast Packets In for port. | ||||
| CallportsStatsOutMcast | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.16 | DisplayString (SIZE (0..20)) | RO | |
column · DisplayString (SIZE (0..20)) · read-only · current Multicast Packets Out for port. | ||||
| CallportsStatsInDiscards | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.17 | Counter32 | RO | |
column · Counter32 · read-only · current Discarded Packets for port. | ||||
| CallportsStatsOutDiscards | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.18 | Counter32 | RO | |
column · Counter32 · read-only · current Outbound Packets for port. | ||||
| CallportsStatsInErrors | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.19 | Counter32 | RO | |
column · Counter32 · read-only · current Error Packets for port. | ||||
| CallportsStatsOutErrors | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.20 | Counter32 | RO | |
column · Counter32 · read-only · current Not sent packets due to error. | ||||
| CallportsStatsInUnknownProtos | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.21 | DisplayString (SIZE (0..20)) | RO | |
column · DisplayString (SIZE (0..20)) · read-only · current Unknown protocol packets. | ||||
| CallportsStatsOutQLen | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.22 | DisplayString (SIZE (0..20)) | RO | |
column · DisplayString (SIZE (0..20)) · read-only · current Outbound Packet Queue Length. | ||||
| CallportsStatsipInReceives | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.23 | Counter32 | RO | |
column · Counter32 · read-only · current Ip In Receives. | ||||
| CallportsStatsipInHeaderErrors | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.24 | Counter32 | RO | |
column · Counter32 · read-only · current Ip In Header Errors. | ||||
| CallportsStatsipInDiscards | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.25 | Counter32 | RO | |
column · Counter32 · read-only · current Ip In Discards. | ||||
| CallportsStatsLinkStateChange | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.26 | Counter32 | RO | |
column · Counter32 · read-only · current Number of link state changes. | ||||
| SclearPortsStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this to clear(2) results in clearing the statistics for all ports.
| ||||
| NagClearStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.7 | |||
| SsnmpClearStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.7.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this to clear(2) results in clearing the SNMP statistics.
| ||||
| NntpStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.9 | |||
| SntpPrimaryServerReqSent | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.9.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The total number of NTP requests sent to Primary NTP Server. | ||||
| SntpPrimaryServerRespRcvd | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.9.2 | Integer32 | RO | |
scalar · Integer32 · read-only · current The total number of NTP responces received from Primary NTP Server. | ||||
| SntpPrimaryServerUpdates | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.9.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current The total number of NTP Updates by Primary NTP Server. | ||||
| SntpSecondaryServerReqSent | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.9.4 | Integer32 | RO | |
scalar · Integer32 · read-only · current The total number of NTP requests sent to Secondary NTP Server. | ||||
| SntpSecondaryServerRespRcvd | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.9.5 | Integer32 | RO | |
scalar · Integer32 · read-only · current The total number of NTP responces received from Secondary NTP Server. | ||||
| SntpSecondaryServerUpdates | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.9.6 | Integer32 | RO | |
scalar · Integer32 · read-only · current The total number of NTP Updates by Secondary NTP Server. | ||||
| SntpLastUpdateServer | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.9.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current The type of ntp server updated last time.
| ||||
| SntpLastUpdateTime | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.9.8 | DisplayString (SIZE (0..127)) | RO | |
scalar · DisplayString (SIZE (0..127)) · read-only · current The last time updated by ntp server. | ||||
| SntpClearStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.9.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this value to clear(2) clears the stats for ntp.
| ||||
| SntpSystemCurrentTime | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.9.10 | DisplayString (SIZE (0..127)) | RO | |
scalar · DisplayString (SIZE (0..127)) · read-only · current The current system time. | ||||
| NaclStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.12 | |||
| TaclStatsTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.12.1 | NA | ||
table · not-accessible · current The table of ACL statistics. | ||||
| RaclStatsTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.12.1.1 | NA | ||
row · not-accessible · current Statistics about a particular ACL configuration entry.
| ||||
| CaclStatsIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.12.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The acl index. | ||||
| CaclStatsHits | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.12.1.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current Total number of hits for this ACL entry | ||||
| CaclClearStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.12.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Setting this value to clear(2) clears the stats for the ACL.
| ||||
| NagentInfo | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3 | |||
| Nhardware | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.1 | |||
| ShwPartNumber | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.1.1 | DisplayString (SIZE (0..16)) | RO | |
scalar · DisplayString (SIZE (0..16)) · read-only · current The hardware part number of the Bladetype2 Switch. | ||||
| ShwRevision | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.1.2 | DisplayString (SIZE (0..16)) | RO | |
scalar · DisplayString (SIZE (0..16)) · read-only · current The hardware revision. If the revision is not available, a zero length string should be returned. | ||||
| ShwSerialNumber | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.1.5 | DisplayString (SIZE (0..16)) | RO | |
scalar · DisplayString (SIZE (0..16)) · read-only · current The switch serial number. | ||||
| NportInfo | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2 | |||
| TportInfoTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1 | NA | ||
table · not-accessible · current The table of port information. | ||||
| RportInfoTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1 | NA | ||
| CportInfoIndx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The port index. | ||||
| CportInfoSpeed | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The current operational speed of the port.
| ||||
| CportInfoMode | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The current operational mode of the port.
| ||||
| CportInfoFlowCtrl | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The current operational flow control of the port.
| ||||
| CportInfoLink | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The current operational link status of the port.
| ||||
| CportInfoPhyIfDescr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.6 | DisplayString (SIZE (0..255)) | RO | |
column · DisplayString (SIZE (0..255)) · read-only · current A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the hardware interface. | ||||
| CportInfoPhyIfType | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack.
| ||||
| CportInfoPhyIfMtu | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface. | ||||
| CportInfoPhyIfPhysAddress | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.9 | PhysAddress | RO | |
column · PhysAddress · read-only · current The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length. | ||||
| CportInfoPhyIfOperStatus | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed.
| ||||
| CportInfoPhyIfLastChange | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.11 | TimeTicks | RO | |
column · TimeTicks · read-only · current The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization of the local network management subsystem, then this object contains a zero value. | ||||
| CportInfoMedia | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current The switch port media.
| ||||
| NagDiff | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.4 | |||
| SagDiffState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.4.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current When this object is read the current state is returned. idle(3) indicates that there is no diff in progess. complete(5) indicates that the last diff operation is completed. Setting the value to diff(1), will start a new diff operation Diff compares the new configuration with the current configuration and shows the pending configuration changes. Setting the value to flashdiff(1), will start a new diff operation. flashdiff compares new configuration with the flash configuration. To read the configuration changes use the agDiffTable once the state of this variable returns complete.
| ||||
| SagDiffTableSize | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.4.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of strings in the diff table. | ||||
| TagDiffTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.4.4 | NA | ||
table · not-accessible · current The table of URL path for URL load balancing in the current_config. | ||||
| RagDiffTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.4.4.1 | NA | ||
| CagDiffIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.4.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The table index. | ||||
| CagDiffString | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.4.4.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current A string in the diff table. | ||||
| NagCfgDump | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.5 | |||
| SagCfgDumpState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.5.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current When this object is read the current state is returned. idle(2) indicates that there is no dump in progess. complete(4) indicates that the last dump operation is completed. Setting the value to dump(1), will start a new dump operation Dump will show the current configuration. To read the configuration dump use the agCfgDumpTable once the state of this variable returns complete. Once the agCfgDumpTable is read the state should be set back to 'idle' which frees the dump buffer and others can issue a dump command via SNMP.
| ||||
| SagCfgDumpTableSize | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.5.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of strings in the dump table. | ||||
| TagCfgDumpTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.5.4 | NA | ||
table · not-accessible · current The table of dump strings. | ||||
| RagCfgDumpTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.5.4.1 | NA | ||
| CagCfgDumpIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.5.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The table index. | ||||
| CagCfgDumpString | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.5.4.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current A string in the dump table. | ||||
| NgeaportInfo | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.7 | |||
| TgeaportInfoTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.7.1 | NA | ||
table · not-accessible · current The table of gea port mapping. | ||||
| RgeaportInfoTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.7.1.1 | NA | ||
| CgeaportInfoLogicalIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.7.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The logical port index. | ||||
| CgeaportInfoPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.7.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The GEA Port (0-based). | ||||
| CgeaportInfoUnit | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.7.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The GEA Unit. | ||||
| NufdInfo | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8 | |||
| SufdInfoState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Uplink Failure Detection State.
| ||||
| SufdInfoLtMStatus | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current LtM Status.
| ||||
| SufdInfoLtMPorts | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8.3 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The LtM port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to LtM
0 - The represented port does not belong to LtM. | ||||
| SufdInfoLtMTrunks | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8.4 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The LtM trunk list. The trunks are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to LtM
0 - The represented trunk does not belong to LtM. | ||||
| SufdInfoLtMAdminkey | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current The LtM admin key. | ||||
| SufdInfoLtDStatus | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8.6 | INTEGER | RO | |
scalar · INTEGER · read-only · current LtD status.
| ||||
| SufdInfoLtDPorts | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8.7 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The LtD port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to LtD
0 - The represented port does not belong to LtD. | ||||
| SufdInfoLtDTrunks | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8.8 | INTEGER | RO | |
scalar · INTEGER · read-only · current The LtD trunk list. The trunks are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to LtD
0 - The represented trunk does not belong to LtD. | ||||
| SufdInfoLtDAdminkeyMaxEnt | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8.9 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the LtD admin key configuration table. | ||||
| TufdInfoLtDAdminkeyTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8.10 | NA | ||
table · not-accessible · current The table of LtD admin key configuration. | ||||
| RufdInfoLtDAdminkeyTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8.10.1 | NA | ||
| CufdInfoLtDAdminkey | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8.10.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The LtD admin key. | ||||
| NsfpInfo | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9 | |||
| TsfpInfoTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9.1 | NA | ||
table · not-accessible · current The table of external port SFP information. | ||||
| RsfpInfoTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9.1.1 | NA | ||
| CsfpInfoIndx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The external port SFX index. | ||||
| CsfpInfoPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9.1.1.2 | DisplayString (SIZE (0..6)) | RO | |
column · DisplayString (SIZE (0..6)) · read-only · current External Port SFP/XFP alias. | ||||
| CsfpInfoDevice | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9.1.1.3 | DisplayString (SIZE (0..6)) | RO | |
column · DisplayString (SIZE (0..6)) · read-only · current External Port SFP/XFP Device. | ||||
| CsfpInfoTXEnable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current External Port SFP/XFP TX-Enable.
| ||||
| CsfpInfoRXSignal | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current External Port SFP/XFP RX-Signal.
| ||||
| CsfpInfoTXFault | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current External Port SFP/XFP TX-Fault.
| ||||
| CsfpInfoApproved | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current External Port SFP/XFP Approval.
| ||||
| NagentOper | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4 | |||
| TagPortOperTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.1 | NA | ||
table · not-accessible · current The table of port operations. | ||||
| RagPortOperTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.1.1 | NA | ||
| CportOperIdx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The port index. | ||||
| CportOperState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/Disable port.
| ||||
| CportOperRmon | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/Disable RMON for port.
| ||||
| NagNTPOper | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.2 | |||
| SntpOperSendReq | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Allows the user to send requests to the NTP server.
| ||||
| TportOperDot1xTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.3 | NA | ||
table · not-accessible · current The table of port operations. | ||||
| RportOperDot1xTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.3.1 | NA | ||
| CportOperDot1xIndx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The port index. | ||||
| CportOperDot1xReset | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.3.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Reinitialize 802.1x access control on port.
| ||||
| CportOperDot1xReauth | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.3.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Initiate reauthentication on port.
| ||||
| Nlayer2 | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2 | |||
| Nlayer2Configs | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1 | |||
| Nvlan | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1 | |||
| SvlanMaxEnt | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the VLAN configuration table. | ||||
| TvlanCurCfgTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.2 | NA | ||
table · not-accessible · current The table of VLAN configuration. | ||||
| RvlanCurCfgTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.2.1 | NA | ||
| CvlanCurCfgVlanId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The VLAN identifier. | ||||
| CvlanCurCfgVlanName | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.2.1.2 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current The VLAN name. | ||||
| CvlanCurCfgPorts | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.2.1.3 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The port list in the VLAN. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VLAN
0 - The represented port does not belong to the VLAN | ||||
| CvlanCurCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.2.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable a VLAN
| ||||
| CvlanCurCfgStg | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.2.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The Spanning Tree Group for the VLAN. | ||||
| TvlanNewCfgTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.3 | NA | ||
table · not-accessible · current The table of VLAN configuration. | ||||
| RvlanNewCfgTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.3.1 | NA | ||
| CvlanNewCfgVlanId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The VLAN identifier. | ||||
| CvlanNewCfgVlanName | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.3.1.2 | DisplayString (SIZE (0..32)) | RC | |
column · DisplayString (SIZE (0..32)) · read-create · current The VLAN name. | ||||
| CvlanNewCfgPorts | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.3.1.3 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The port list in the VLAN. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VLAN
0 - The represented port does not belong to the VLAN | ||||
| CvlanNewCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.3.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable a VLAN
| ||||
| CvlanNewCfgAddPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.3.1.5 | Integer32 | RC | |
column · Integer32 · read-create · current The port to be added to the specified VLAN. A '0' value is returned when read. | ||||
| CvlanNewCfgRemovePort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.3.1.6 | Integer32 | RC | |
column · Integer32 · read-create · current The port to be removed from the specified VLAN. A '0' value is returned when read. | ||||
| CvlanNewCfgDelete | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.3.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current This is an action object to create or delete a VLAN. other(1) is returned always when read. The following values are writable: delete(2)...to delete a VLAN
| ||||
| CvlanNewCfgStg | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.3.1.9 | Integer32 | RC | |
column · Integer32 · read-create · current The Spanning Tree Group for the VLAN. | ||||
| Ntrunkgroup | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2 | |||
| StrunkGroupTableMaxSize | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of entries in trunk group table. | ||||
| TtrunkGroupCurCfgTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.2 | NA | ||
table · not-accessible · current The table of trunk group configuration. | ||||
| RtrunkGroupCurCfgTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.2.1 | NA | ||
row · not-accessible · current A row in the trunk group configuration table. | ||||
| CtrunkGroupCurCfgIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The identifier of the trunk group. | ||||
| CtrunkGroupCurCfgPorts | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.2.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The port list in the trunk group. The ports are presented in
bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the trunk group
0 - The represented port does not belong to the trunk group | ||||
| CtrunkGroupCurCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable a trunk group.
| ||||
| TtrunkGroupNewCfgTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.3 | NA | ||
table · not-accessible · current The table of trunk group configuration. | ||||
| RtrunkGroupNewCfgTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.3.1 | NA | ||
row · not-accessible · current A row in the trunk group configuration table. | ||||
| CtrunkGroupNewCfgIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The identifier of the trunk group. | ||||
| CtrunkGroupNewCfgPorts | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.3.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The port list in the trunk group. The ports are presented
in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the trunk group
0 - The represented port does not belong to the trunk group | ||||
| CtrunkGroupNewCfgAddPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.3.1.3 | Integer32 | RC | |
column · Integer32 · read-create · current The port to be added in the trunk group. When read, 0 is returned. | ||||
| CtrunkGroupNewCfgRemovePort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.3.1.4 | Integer32 | RC | |
column · Integer32 · read-create · current The port to be deleted from the trunk group. when read, 0 is returned. | ||||
| CtrunkGroupNewCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.3.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable a trunk group.
| ||||
| CtrunkGroupNewCfgDelete | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.3.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current Setting the value to delete(2) will delete the entire row. When read, other(1) is returned.
| ||||
| NstgCfg | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3 | |||
| TstgCurCfgTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.1 | NA | ||
table · not-accessible · current The table of Spanning Tree Group configuration. | ||||
| RstgCurCfgTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.1.1 | NA | ||
row · not-accessible · current Information about a particular Spanning Tree Group configuration.
| ||||
| CstgCurCfgIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB. | ||||
| CstgCurCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Turn on of off Spanning Tree operation of a particular Spanning Tree Group.
| ||||
| CstgCurCfgPriority | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.1.1.5 | INTEGER (0..65535) | RO | |
column · INTEGER (0..65535) · read-only · current The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. | ||||
| CstgCurCfgBrgHelloTime | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.1.1.6 | INTEGER (1..10) | RO | |
column · INTEGER (1..10) · read-only · current The value in seconds that all bridges use for HelloTime when this bridge is acting as the root. | ||||
| CstgCurCfgBrgForwardDelay | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.1.1.7 | INTEGER (4..30) | RO | |
column · INTEGER (4..30) · read-only · current The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root. | ||||
| CstgCurCfgBrgMaxAge | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.1.1.8 | INTEGER (6..40) | RO | |
column · INTEGER (6..40) · read-only · current The value in seconds that all bridges use for MaxAge when this bridge is acting as the root. | ||||
| CstgCurCfgVlanBmap | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.1.1.10 | OCTET STRING (SIZE (0..512)) | RO | |
column · OCTET STRING (SIZE (0..512)) · read-only · current The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4095.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1 (as index to stgCurCfgTable)
where x : 1 - The represented vlan applied to the spanning tree.
0 - The represented vlan not applied to the spanning tree | ||||
| TstgNewCfgTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2 | NA | ||
table · not-accessible · current The table of Spanning Tree Groups configuration in the new_config. | ||||
| RstgNewCfgTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1 | NA | ||
row · not-accessible · current Information about a particular Spanning Tree Group configuration.
| ||||
| CstgNewCfgIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB. | ||||
| CstgNewCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current Turn on of off Spanning Tree operation of a particular Spanning Tree Group.
| ||||
| CstgNewCfgDefaultCfg | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current Setting the value to default-config(1) will set the default
configuration as recommended by IEEE 802.1D for a particular
Spanning Tree Group. default-config (1) is always returned
When read, but it does not mean anything.
| ||||
| CstgNewCfgAddVlan | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1.4 | Integer32 | RC | |
column · Integer32 · read-create · current The vlan to be added to the specified Spanning Tree Group. A '0' value is returned when read. | ||||
| CstgNewCfgRemoveVlan | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1.5 | Integer32 | RC | |
column · Integer32 · read-create · current The vlan to be removed from the specified Spanning Tree Group. A '0' value is returned when read. | ||||
| CstgNewCfgPriority | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1.8 | INTEGER (0..65535) | RC | |
column · INTEGER (0..65535) · read-create · current The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. | ||||
| CstgNewCfgBrgHelloTime | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1.9 | INTEGER (1..10) | RC | |
column · INTEGER (1..10) · read-create · current The value in seconds that all bridges use for HelloTime when this bridge is acting as the root. | ||||
| CstgNewCfgBrgForwardDelay | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1.10 | INTEGER (4..30) | RC | |
column · INTEGER (4..30) · read-create · current The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root. | ||||
| CstgNewCfgBrgMaxAge | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1.11 | INTEGER (6..40) | RC | |
column · INTEGER (6..40) · read-create · current The value in seconds that all bridges use for MaxAge when this bridge is acting as the root. | ||||
| CstgNewCfgVlanBmap | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1.13 | OCTET STRING (SIZE (0..512)) | RO | |
column · OCTET STRING (SIZE (0..512)) · read-only · current The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4095.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1 (as index to stgCurCfgTable)
where x : 1 - The represented vlan applied to the spanning tree.
0 - The represented vlan not applied to the spanning tree | ||||
| TstgCurCfgPortTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.3 | NA | ||
table · not-accessible · current The table of Spanning Tree Group port configuration in the current_config. | ||||
| RstgCurCfgPortTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.3.1 | NA | ||
row · not-accessible · current Information about port configuration of a particular Spanning Tree Group. | ||||
| CstgCurCfgStgIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB. | ||||
| CstgCurCfgPortIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.3.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The port identifier of a particular Spanning Tree Group. | ||||
| CstgCurCfgPortState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.3.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Turn on of off Spanning Tree operation of a particular port of a Spanning Tree Group.
| ||||
| CstgCurCfgPortPriority | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.3.1.4 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. | ||||
| CstgCurCfgPortPathCost | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.3.1.5 | INTEGER (0..65535) | RO | |
column · INTEGER (0..65535) · read-only · current The contribution of this port to the path cost of paths towards the spanning tree root which include this port. | ||||
| CstgCurCfgPortLink | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.3.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The type of the port link.
| ||||
| CstgCurCfgPortEdge | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.3.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The state of port edge.
| ||||
| CstgCurCfgPortFastFwd | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.3.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The state of port fast forwarding.
| ||||
| TstgNewCfgPortTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.4 | NA | ||
table · not-accessible · current The table of Spanning Tree Group port configuration in the new_config. | ||||
| RstgNewCfgPortTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.4.1 | NA | ||
row · not-accessible · current Information about port configuration of a particular Spanning Tree Group. | ||||
| CstgNewCfgStgIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB. | ||||
| CstgNewCfgPortIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.4.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The port identifier of a particular Spanning Tree Group. | ||||
| CstgNewCfgPortState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.4.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current Turn on of off Spanning Tree operation of a particular port of a Spanning Tree Group.
| ||||
| CstgNewCfgPortPriority | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.4.1.4 | INTEGER (0..255) | RC | |
column · INTEGER (0..255) · read-create · current The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. | ||||
| CstgNewCfgPortPathCost | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.4.1.5 | INTEGER (0..65535) | RC | |
column · INTEGER (0..65535) · read-create · current The contribution of this port to the path cost of paths towards the spanning tree root which include this port. | ||||
| CstgNewCfgPortLink | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.4.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current The type of the port link.
| ||||
| CstgNewCfgPortEdge | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.4.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current The state of port edge.
| ||||
| CstgNewCfgPortFastFwd | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.4.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current The state of port fast forwarding.
| ||||
| Nmirroring | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4 | |||
| NmirrPortMirr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1 | |||
| SpmCurCfgPortMirrState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The state of port-based port mirroring.
| ||||
| SpmNewCfgPortMirrState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current The state of port-based port mirroring.
| ||||
| TpmCurCfgPortMonitorTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.3 | NA | ||
table · not-accessible · current The table of monitoring ports. | ||||
| RpmCurCfgPortMonitorEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.3.1 | NA | ||
row · not-accessible · current A row in the monitoring port table. | ||||
| CpmCurCfgPmirrMoniPortIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The monitoring port number. | ||||
| CpmCurCfgPmirrMirrPortIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.3.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The mirrored port number | ||||
| CpmCurCfgPmirrDirection | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.3.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The type of traffic to be monitored with respect to the mirrored port.
| ||||
| TpmNewCfgPortMonitorTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.4 | NA | ||
table · not-accessible · current The table of monitoring ports. | ||||
| RpmNewCfgPortMonitorEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.4.1 | NA | ||
row · not-accessible · current A row in the monitoring port table. | ||||
| CpmNewCfgPmirrMoniPortIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The monitoring port number. | ||||
| CpmNewCfgPmirrMirrPortIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.4.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The mirrored port number | ||||
| CpmNewCfgPmirrDirection | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.4.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current The type of traffic to be monitored with respect to the mirrored port.
| ||||
| CpmNewCfgPmirrDelete | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.4.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current Setting the value to delete(2) will delete the entire row. When read, other(1) is returned.
| ||||
| CpmNewCfgPmonDelete | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.4.1.10 | INTEGER | RC | |
column · INTEGER · read-create · current Setting the value to delete(2) will delete the monitor port. When read, other(1) is returned.
| ||||
| NmstCfg | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5 | |||
| NmstGeneralCfg | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.1 | |||
| SmstCurCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable MSTP/RSTP
| ||||
| SmstNewCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable MSTP/RSTP
| ||||
| SmstCurCfgRegionName | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.1.3 | DisplayString (SIZE (0..32)) | RO | |
scalar · DisplayString (SIZE (0..32)) · read-only · current The Name for the Region's configuration. | ||||
| SmstNewCfgRegionName | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.1.4 | DisplayString (SIZE (0..32)) | RW | |
scalar · DisplayString (SIZE (0..32)) · read-write · current The Name for the Region's configuration. | ||||
| SmstCurCfgRegionVersion | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.1.5 | INTEGER (0..65535) | RO | |
scalar · INTEGER (0..65535) · read-only · current Version of the MST Region. | ||||
| SmstNewCfgRegionVersion | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.1.6 | INTEGER (0..65535) | RW | |
scalar · INTEGER (0..65535) · read-write · current Version of the MST Region. | ||||
| SmstCurCfgMaxHopCount | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.1.7 | INTEGER (4..60) | RO | |
scalar · INTEGER (4..60) · read-only · current Indicates the maximum hop count value. | ||||
| SmstNewCfgMaxHopCount | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.1.8 | INTEGER (4..60) | RW | |
scalar · INTEGER (4..60) · read-write · current Indicates the maximum hop count value. | ||||
| SmstCurCfgStpMode | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.1.9 | INTEGER | RO | |
scalar · INTEGER · read-only · current The version of Spanning Tree Protocal the bridge is currently running.
| ||||
| SmstNewCfgStpMode | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.1.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current The version of Spanning Tree Protocal the bridge is currently running.
| ||||
| NmstCistCfg | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2 | |||
| SmstCistDefaultCfg | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting the value to default(1) will set the Multiple Spanning Tree and member parameters to default. default(1) is always returned when read, but it does not mean anything.
| ||||
| NmstCistBridgeCfg | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.2 | |||
| SmstCistCurCfgBridgePriority | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.2.1 | INTEGER (0..65535) | RO | |
scalar · INTEGER (0..65535) · read-only · current The value of the writable portion of the Brigde Identifier comprising of the first two octets. | ||||
| SmstCistNewCfgBridgePriority | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.2.2 | INTEGER (0..65535) | RW | |
scalar · INTEGER (0..65535) · read-write · current The value of the writable portion of the Brigde Identifier comprising of the first two octets. | ||||
| SmstCistCurCfgBridgeMaxAge | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.2.5 | INTEGER (6..40) | RO | |
scalar · INTEGER (6..40) · read-only · current The value in seconds that all bridges use for MaxAge when this bridge is acting as the root. | ||||
| SmstCistNewCfgBridgeMaxAge | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.2.6 | INTEGER (6..40) | RW | |
scalar · INTEGER (6..40) · read-write · current The value in seconds that all bridges use for MaxAge when this bridge is acting as the root. | ||||
| SmstCistCurCfgBridgeForwardDelay | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.2.7 | INTEGER (4..30) | RO | |
scalar · INTEGER (4..30) · read-only · current The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root. | ||||
| SmstCistNewCfgBridgeForwardDelay | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.2.8 | INTEGER (4..30) | RW | |
scalar · INTEGER (4..30) · read-write · current The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root. | ||||
| SmstCistCurCfgVlanBmap | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.2.9 | OCTET STRING (SIZE (0..512)) | RO | |
scalar · OCTET STRING (SIZE (0..512)) · read-only · current The vlans applied to the CIST group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4094.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1
where x : 1 - The represented vlan applied to the CIST group.
0 - The represented vlan not applied to the group | ||||
| SmstCistNewCfgVlanBmap | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.2.10 | OCTET STRING (SIZE (0..512)) | RO | |
scalar · OCTET STRING (SIZE (0..512)) · read-only · current The vlans applied to the CIST group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4094.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1
where x : 1 - The represented vlan applied to the CIST group.
0 - The represented vlan not applied to the group | ||||
| SmstCistNewCfgAddVlan | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.2.11 | Integer32 | RC | |
scalar · Integer32 · read-create · current The vlan to be added to the CIST Group. A '0' value is returned when read. | ||||
| TmstCistCurCfgPortTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.3 | NA | ||
table · not-accessible · current The table of CIST Port configuration. | ||||
| RmstCistCurCfgPortTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.3.1 | NA | ||
row · not-accessible · current Information about a particular CIST Port configuration. | ||||
| CmstCistCurCfgPortIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The port number of the port for which this entry contains spanning tree configuration. | ||||
| CmstCistCurCfgPortPriority | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.3.1.2 | INTEGER (0..240) | RO | |
column · INTEGER (0..240) · read-only · current The four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting this value. | ||||
| CmstCistCurCfgPortPathCost | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.3.1.3 | INTEGER (0..200000000) | RO | |
column · INTEGER (0..200000000) · read-only · current The contribution of this port to the path cost of paths towards the CIST Root which include this port. | ||||
| CmstCistCurCfgPortLinkType | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.3.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The administrative point-to-point status of the LAN segment attached to this port. A value of p2p (2) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of shared(3) indicates that this port should be treated as having a shared media connection. A value of auto(1) indicates that this port is considered to have a point-to-point link if it is an Aggregator and all of its members are aggregatable, or if the MAC entity is configured for full duplex operation, either through auto-negotiation or by management means.
| ||||
| CmstCistCurCfgPortEdge | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.3.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The value of the Edge Port parameter.
| ||||
| CmstCistCurCfgPortStpState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.3.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Turn port's Spanning Tree on/off.
| ||||
| CmstCistCurCfgPortHelloTime | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.3.1.7 | INTEGER (1..10) | RO | |
column · INTEGER (1..10) · read-only · current The amount of time between the transmission of Configuration Port PDUs in seconds. | ||||
| TmstCistNewCfgPortTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.4 | NA | ||
table · not-accessible · current The table of CIST Port configuration. | ||||
| RmstCistNewCfgPortTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.4.1 | NA | ||
row · not-accessible · current Information about a particular CIST Port configuration. | ||||
| CmstCistNewCfgPortIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The port number of the port for which this entry contains spanning tree configuration. | ||||
| CmstCistNewCfgPortPriority | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.4.1.2 | INTEGER (0..240) | RC | |
column · INTEGER (0..240) · read-create · current The four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting this value. | ||||
| CmstCistNewCfgPortPathCost | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.4.1.3 | INTEGER (0..200000000) | RC | |
column · INTEGER (0..200000000) · read-create · current The contribution of this port to the path cost of paths towards the CIST Root which include this port. | ||||
| CmstCistNewCfgPortLinkType | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.4.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current The administrative point-to-point status of the LAN segment attached to this port. A value of p2p (2) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of shared(3) indicates that this port should be treated as having a shared media connection. A value of auto(1) indicates that this port is considered to have a point-to-point link if it is an Aggregator and all of its members are aggregatable, or if the MAC entity is configured for full duplex operation, either through auto-negotiation or by management means.
| ||||
| CmstCistNewCfgPortEdge | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.4.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current The value of the Edge Port parameter.
| ||||
| CmstCistNewCfgPortStpState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.4.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current Turn port's Spanning Tree on/off.
| ||||
| CmstCistNewCfgPortHelloTime | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.4.1.7 | INTEGER (1..10) | RC | |
column · INTEGER (1..10) · read-create · current The amount of time between the transmission of Configuration Port PDUs in seconds. | ||||
| Nlacp | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6 | |||
| SlacpCurSystemPriority | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.1 | INTEGER (1..65535) | RO | |
scalar · INTEGER (1..65535) · read-only · current A 2-octet read-write value indicating the priority value associated with the Actor's System ID. | ||||
| SlacpNewSystemPriority | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.2 | INTEGER (1..65535) | RW | |
scalar · INTEGER (1..65535) · read-write · current A 2-octet read-write value indicating the priority value associated with the Actor's System ID. | ||||
| SlacpCurSystemTimeoutTime | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current If a port does not receive LACPDUs for Timeout time LACP information pertaining to the port is invalidated. Its every 3 sec (short) and every 90 sec (long 3).
| ||||
| SlacpNewSystemTimeoutTime | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current If a port does not receive LACPDUs for Timeout time LACP information pertaining to the port is invalidated. Its every 3 sec (short) and every 90 sec (long 3).
| ||||
| TlacpCurPortCfgTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.7 | NA | ||
table · not-accessible · current The table of LACP port configuration. | ||||
| RlacpCurPortCfgTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.7.1 | NA | ||
| ClacpCurPortCfgTableId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.7.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current LACP port number. | ||||
| ClacpCurPortState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.7.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current LACP port state can be one of three states off (Not participating in LACP) Active (Initiates LACPDU updates) Passive (Does not initiate LACPDU updates but responds to peer.
| ||||
| ClacpCurPortActorPortPriority | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.7.1.3 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current The priority value assigned to this Aggregation Port. This 16-bit value is read-only. | ||||
| ClacpCurPortActorAdminKey | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.7.1.4 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current The current administrative value of the Key for the Aggregation Port. This is a 16-bit read-only value. The meaning of particular Key values is of local significance. | ||||
| TlacpNewPortCfgTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.8 | NA | ||
table · not-accessible · current The table of LACP port configuration. | ||||
| RlacpNewPortCfgTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.8.1 | NA | ||
| ClacpNewPortCfgTableId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.8.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current LACP port number. | ||||
| ClacpNewPortState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.8.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current LACP port state can be one of three states off (Not participating in LACP) Active (Initiates LACPDU updates) Passive (Does not initiate LACPDU updates but responds to peer.
| ||||
| ClacpNewPortActorPortPriority | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.8.1.3 | INTEGER (1..65535) | RW | |
column · INTEGER (1..65535) · read-write · current The priority value assigned to this Aggregation Port. This 16-bit value is read-write. | ||||
| ClacpNewPortActorAdminKey | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.8.1.4 | INTEGER (1..65535) | RW | |
column · INTEGER (1..65535) · read-write · current The current administrative value of the Key for the Aggregation Port. This is a 16-bit read-write value. The meaning of particular Key values is of local significance. | ||||
| Nthash | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.7 | |||
| NthashL2 | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.7.1 | |||
| Sl2ThashCurCfgSmacState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.7.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable smac hash.
| ||||
| Sl2ThashNewCfgSmacState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.7.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable smac hash.
| ||||
| Sl2ThashCurCfgDmacState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.7.1.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable dmac hash.
| ||||
| Sl2ThashNewCfgDmacState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.7.1.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable dmac hash.
| ||||
| Sl2ThashCurCfgSipState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.7.1.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable sip hash.
| ||||
| Sl2ThashNewCfgSipState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.7.1.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable sip hash.
| ||||
| Sl2ThashCurCfgDipState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.7.1.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable dip hash.
| ||||
| Sl2ThashNewCfgDipState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.7.1.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable dip hash.
| ||||
| Nl2GeneralCfg | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.8 | |||
| SupfastCurCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.8.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable uplink fast
| ||||
| SupfastNewCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.8.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable uplink fast
| ||||
| SupdateCurCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.8.3 | INTEGER (10..200) | RO | |
scalar · INTEGER (10..200) · read-only · current UplinkFast station update rate: packets per second | ||||
| SupdateNewCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.8.4 | INTEGER (10..200) | RW | |
scalar · INTEGER (10..200) · read-write · current UplinkFast station update rate: packets per second | ||||
| SpvstCompatibilityCurCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.8.9 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable PVST+ compatibility
| ||||
| SpvstCompatibilityNewCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.8.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable PVST+ compatibility
| ||||
| Nufd | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9 | |||
| NufdGeneralCfg | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1 | |||
| SufdCurCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable UFD state
| ||||
| SufdNewCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable UFD state
| ||||
| SufdCurCfgLtMPorts | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.3 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The LtM port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to LtM
0 - The represented port does not belong to LtM | ||||
| SufdNewCfgLtMPorts | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.4 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The LtM port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to LtM
0 - The represented port does not belong to LtM | ||||
| SufdCurCfgLtMTrunks | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.5 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The LtM trunk list. The trunks are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to LtM
0 - The represented trunk does not belong to LtM | ||||
| SufdNewCfgLtMTrunks | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.6 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The LtM trunk list. The trunks are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to LtM
0 - The represented trunk does not belong to LtM | ||||
| SufdCurCfgLtMAdminkey | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current The LtM admin key. | ||||
| SufdNewCfgLtMAdminkey | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.8 | INTEGER | RO | |
scalar · INTEGER · read-only · current The LtM admin key. | ||||
| SufdCurCfgLtDPorts | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.9 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The LtD port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to LtD
0 - The represented port does not belong to LtD | ||||
| SufdNewCfgLtDPorts | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.10 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The LtD port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to LtD
0 - The represented port does not belong to LtD | ||||
| SufdCurCfgLtDTrunks | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.11 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The LtD trunk list. The trunks are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to LtD
0 - The represented trunk does not belong to LtD | ||||
| SufdNewCfgLtDTrunks | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.12 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The LtD trunk list. The trunks are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to LtD
0 - The represented trunk does not belong to LtD | ||||
| SufdLtDAdminkeyMaxEnt | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.13 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the LtD admin key configuration table. | ||||
| TufdLtDAdminkeyCurCfgTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.14 | NA | ||
table · not-accessible · current The table of LtD admin key configuration. | ||||
| RufdLtDAdminkeyCurCfgTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.14.1 | NA | ||
| CufdLtDAdminkeyCurCfg | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.14.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The LtD admin key. | ||||
| TufdLtDAdminkeyNewCfgTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.15 | NA | ||
table · not-accessible · current The table of LtD admin key configuration. | ||||
| RufdLtDAdminkeyNewCfgTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.15.1 | NA | ||
| CufdLtDAdminkeyNewCfg | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.15.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The LtD admin key. | ||||
| SufdNewCfgAddLtMPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.16 | INTEGER | RW | |
scalar · INTEGER · read-write · current The port to be added to LtM. A '0' value is returned when read. | ||||
| SufdNewCfgRemoveLtMPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.17 | INTEGER | RW | |
scalar · INTEGER · read-write · current The port to be removed from LtM. A '0' value is returned when read. | ||||
| SufdNewCfgAddLtMTrunk | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.18 | INTEGER | RW | |
scalar · INTEGER · read-write · current The trunk to be added to LtM. A '0' value is returned when read. | ||||
| SufdNewCfgRemoveLtMTrunk | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.19 | INTEGER | RW | |
scalar · INTEGER · read-write · current The trunk to be removed from LtM. A '0' value is returned when read. | ||||
| SufdNewCfgAddLtMAdminkey | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.20 | INTEGER | RW | |
scalar · INTEGER · read-write · current The admin key to be added to LtM. A '0' value is returned when read. | ||||
| SufdNewCfgRemoveLtMAdminkey | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.21 | INTEGER | RW | |
scalar · INTEGER · read-write · current The admin key to be removed from LtM. A '0' value is returned when read. | ||||
| SufdNewCfgAddLtDPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.22 | INTEGER | RW | |
scalar · INTEGER · read-write · current The port to be added to LtD. A '0' value is returned when read. | ||||
| SufdNewCfgRemoveLtDPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.23 | INTEGER | RW | |
scalar · INTEGER · read-write · current The port to be removed from LtM. A '0' value is returned when read. | ||||
| SufdNewCfgAddLtDTrunk | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.24 | INTEGER | RW | |
scalar · INTEGER · read-write · current The trunk to be added to LtM. A '0' value is returned when read. | ||||
| SufdNewCfgRemoveLtDTrunk | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.25 | INTEGER | RW | |
scalar · INTEGER · read-write · current The trunk to be removed from LtD. A '0' value is returned when read. | ||||
| SufdNewCfgAddLtDAdminkey | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.26 | INTEGER | RW | |
scalar · INTEGER · read-write · current The admin key to be added to LtD. A '0' value is returned when read. | ||||
| SufdNewCfgRemoveLtDAdminkey | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.27 | INTEGER | RW | |
scalar · INTEGER · read-write · current The admin key to be removed from LtD. A '0' value is returned when read. | ||||
| SufdCurCfgGlobalState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.28 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current global Failover settings.
| ||||
| SufdNewCfgGlobalState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.29 | INTEGER | RW | |
scalar · INTEGER · read-write · current New global Failover settings.
| ||||
| Ndot1x | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11 | |||
| Sdot1xCurStatus | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Dot1x status
| ||||
| Sdot1xNewStatus | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Dot1x status
| ||||
| Tdot1xCurCfgPortTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3 | NA | ||
table · not-accessible · current The table of 8021x configuration in the Current_config. | ||||
| Rdot1xCurCfgPortEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3.1 | NA | ||
| Cdot1xCurCfgPortIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The 8021x Port number for which the table is related. | ||||
| Cdot1xCurCfgPortMode | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Port authenticaton mode
forceUnauth(0),
auto(1),
forceAuth(2)
| ||||
| Cdot1xCurCfgPortQtPeriod | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3.1.3 | INTEGER (0..65535) | RO | |
column · INTEGER (0..65535) · read-only · current Quiet period (0-65535) | ||||
| Cdot1xCurCfgPortTxPeriod | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3.1.4 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Tx Period | ||||
| Cdot1xCurCfgPortSupTmout | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3.1.5 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Supplicant timeout (1..65535) | ||||
| Cdot1xCurCfgPortSrvTmout | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3.1.6 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Server timeout (1..65535) | ||||
| Cdot1xCurCfgPortMaxRq | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3.1.7 | INTEGER (1..10) | RO | |
column · INTEGER (1..10) · read-only · current Maximum numer of requests (1..10) | ||||
| Cdot1xCurCfgPortRaPeriod | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3.1.8 | INTEGER (0..604800) | RO | |
column · INTEGER (0..604800) · read-only · current Reautentication period (0..604800) | ||||
| Cdot1xCurCfgPortReAuth | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current ReAuthentication state
off(0),
on(1)
| ||||
| Tdot1xNewCfgPortTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4 | NA | ||
table · not-accessible · current The table of 8021x configuration in the new_config. | ||||
| Rdot1xNewCfgPortEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1 | NA | ||
| Cdot1xNewCfgPortIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The 8021x Port number for which the table is related. | ||||
| Cdot1xNewCfgPortMode | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current Port authentication mode
forceUnauth(0),
auto(1),
forceAuth(2)
| ||||
| Cdot1xNewCfgPortQtPeriod | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.3 | INTEGER (0..65535) | RC | |
column · INTEGER (0..65535) · read-create · current Quiet period (0..65535) | ||||
| Cdot1xNewCfgPortTxPeriod | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.4 | INTEGER (1..65535) | RC | |
column · INTEGER (1..65535) · read-create · current Tx Period (1..65535) | ||||
| Cdot1xNewCfgPortSupTmout | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.5 | INTEGER (1..65535) | RC | |
column · INTEGER (1..65535) · read-create · current Supplicant Timeout (1..65535) | ||||
| Cdot1xNewCfgPortSrvTmout | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.6 | INTEGER (1..65535) | RC | |
column · INTEGER (1..65535) · read-create · current Server Timeout (1..65535) | ||||
| Cdot1xNewCfgPortMaxRq | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.7 | INTEGER (1..10) | RC | |
column · INTEGER (1..10) · read-create · current Maximum number of requests (1..10) | ||||
| Cdot1xNewCfgPortRaPeriod | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.8 | INTEGER (1..604800) | RC | |
column · INTEGER (1..604800) · read-create · current Reauthentication period (1..604800) | ||||
| Cdot1xNewCfgPortReAuth | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.9 | INTEGER | RC | |
column · INTEGER · read-create · current Reauthentication state
off(0),
on(1)
| ||||
| Cdot1xNewCfgPortDefault | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.10 | INTEGER | RC | |
column · INTEGER · read-create · current Port default settings
| ||||
| Cdot1xNewCfgPortApplyGlobal | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.11 | INTEGER | RC | |
column · INTEGER · read-create · current Apply Global config
| ||||
| Ndot1xCurCfgGlobalTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.5 | |||
| Sdot1xCurCfgGlobalMode | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.5.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Autehtication Mode
forceUnauth(0),
auto(1),
forceAuth(2)
| ||||
| Sdot1xCurCfgGlobalQtPeriod | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.5.2 | INTEGER (0..65535) | RO | |
scalar · INTEGER (0..65535) · read-only · current Quiet period (0..65535) | ||||
| Sdot1xCurCfgGlobalTxPeriod | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.5.3 | INTEGER (1..65535) | RO | |
scalar · INTEGER (1..65535) · read-only · current Tx period (1..65535) | ||||
| Sdot1xCurCfgGlobalSupTmout | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.5.4 | INTEGER (1..65535) | RO | |
scalar · INTEGER (1..65535) · read-only · current Supplicant timeout (1..65535) | ||||
| Sdot1xCurCfgGlobalSrvTmout | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.5.5 | INTEGER (1..65535) | RO | |
scalar · INTEGER (1..65535) · read-only · current Server timeout (1..65535) | ||||
| Sdot1xCurCfgGlobalMaxRq | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.5.6 | INTEGER (1..10) | RO | |
scalar · INTEGER (1..10) · read-only · current Maximum number of requests (1..10) | ||||
| Sdot1xCurCfgGlobalRaPeriod | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.5.7 | INTEGER (0..604800) | RO | |
scalar · INTEGER (0..604800) · read-only · current Reauthentication period (0..604800) | ||||
| Sdot1xCurCfgGlobalReAuth | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.5.8 | INTEGER | RO | |
scalar · INTEGER · read-only · current
| ||||
| Ndot1xNewCfgGlobalTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.6 | |||
| Sdot1xNewCfgGlobalMode | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.6.1 | INTEGER | RC | |
scalar · INTEGER · read-create · current Authentication Mode
| ||||
| Sdot1xNewCfgGlobalQtPeriod | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.6.2 | INTEGER (0..65535) | RC | |
scalar · INTEGER (0..65535) · read-create · current Quiet Period (0..65535) | ||||
| Sdot1xNewCfgGlobalTxPeriod | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.6.3 | INTEGER (1..65535) | RC | |
scalar · INTEGER (1..65535) · read-create · current Tx Period (1..65535) | ||||
| Sdot1xNewCfgGlobalSupTmout | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.6.4 | INTEGER (1..65535) | RC | |
scalar · INTEGER (1..65535) · read-create · current Supplicand timeout (1..65535) | ||||
| Sdot1xNewCfgGlobalSrvTmout | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.6.5 | INTEGER (1..65535) | RC | |
scalar · INTEGER (1..65535) · read-create · current Server timeout (1..65535) | ||||
| Sdot1xNewCfgGlobalMaxRq | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.6.6 | INTEGER (1..10) | RC | |
scalar · INTEGER (1..10) · read-create · current Maximum number of requests (1..10) | ||||
| Sdot1xNewCfgGlobalRaPeriod | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.6.7 | INTEGER (1..604800) | RC | |
scalar · INTEGER (1..604800) · read-create · current Reauthentication period (1..604800) | ||||
| Sdot1xNewCfgGlobalReAuth | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.6.8 | INTEGER | RC | |
scalar · INTEGER · read-create · current Reauthentication status
| ||||
| Nfdb | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12 | |||
| NfdbGeneralCfg | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.1 | |||
| SfdbCurCfgAgingTime | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.1.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current Fdb current aging time | ||||
| SfdbNewCfgAgingTime | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.1.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current Fdb new aging time. | ||||
| TfdbNewCfgStaticTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.2 | NA | ||
table · not-accessible · current The table of FDB static entries. | ||||
| RfdbNewCfgStaticEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.2.1 | NA | ||
| CfdbNewCfgEntryIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The fdb entry index | ||||
| CfdbNewCfgAddVlan | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.2.1.2 | Integer32 | RC | |
column · Integer32 · read-create · current Add vlan for fdb entry index | ||||
| CfdbNewCfgAddPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.2.1.3 | Integer32 | RC | |
column · Integer32 · read-create · current The MAC address port number. | ||||
| CfdbNewCfgAddMac | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.2.1.4 | PhysAddress | RC | |
column · PhysAddress · read-create · current Add a fdb entry. | ||||
| CfdbNewCfgDelStaticEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.2.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
| ||||
| TfdbCurCfgStaticTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.3 | NA | ||
table · not-accessible · current The table of FDB static entries. | ||||
| RfdbCurCfgStaticEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.3.1 | NA | ||
| CfdbCurCfgEntryIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The fdb entry index | ||||
| CfdbCurCfgVlan | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.3.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current Add vlan for fdb entry index | ||||
| CfdbCurCfgPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.3.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The MAC address port number. | ||||
| CfdbCurCfgMac | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.3.1.4 | PhysAddress | RO | |
column · PhysAddress · read-only · current Add a fdb entry. | ||||
| Nlayer2Stats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2 | |||
| NfdbStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.1 | |||
| SfdbStatsCurrent | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.1.3 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current Current number of entries in the Forwarding Database. | ||||
| SfdbStatsHiwat | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.1.4 | Integer32 | RO | |
scalar · Integer32 · read-only · current Highest number of entries recorded at any given time in the Forwarding Database. | ||||
| SfdbStatsClear | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.1.11 | INTEGER | RW | |
scalar · INTEGER · read-write · current Clear FDB statistics
| ||||
| NstpStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.2 | |||
| TstgStatsPortTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.2.1 | NA | ||
table · not-accessible · current The table of Spanning Tree Group port statistics. | ||||
| RstgStatsPortTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.2.1.1 | NA | ||
row · not-accessible · current Statistics about port of a particular Spanning Tree Group. | ||||
| CstgStatsStpIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.2.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The identifier of a particular Spanning Tree Group. | ||||
| CstgStatsPortIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.2.1.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The port identifier of a particular Spanning Tree Group. | ||||
| CstgStatsPortRcvCfgBpdus | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.2.1.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current Number of Configuration BPDU's received on this port. | ||||
| CstgStatsPortRcvTcnBpdus | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.2.1.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current Number of TCN BPDU's received on this port. | ||||
| CstgStatsPortXmtCfgBpdus | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.2.1.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current Number of Configuration BPDU's trasmitted from the port. | ||||
| CstgStatsPortXmtTcnBpdus | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.2.1.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current Number of TCN BPDU's trasmitted from the port. | ||||
| NlacpStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3 | |||
| TlacpStatsTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1 | NA | ||
table · not-accessible · current The table of LACP Stats. | ||||
| RlacpStatsTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1 | NA | ||
| ClacpStatsIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current Index | ||||
| ClacpdusRx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current Valid LACPDUs received | ||||
| CmarkerpdusRx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current Valid Marker PDUs received | ||||
| CmarkerresponsepdusRx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current Valid Marker Rsp PDUs received | ||||
| CunknownRx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current Unknown version/TLV type | ||||
| CillegalRx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current Illegal subtype received | ||||
| ClacpdusTx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current LACPDUs transmitted | ||||
| CmarkerpdusTx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current Market PDUs transmitted | ||||
| CmarkerresponsepdusTx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current Marker Rsp PDUs transmitted | ||||
| ClacpClearStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current Setting this to clear(2) results in clearing the LACP statistics.
| ||||
| NufdStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.4 | |||
| SufdNoLtMLinkFailure | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.4.1 | Integer32 | RO | |
| SufdNoLtMLinkBlockingState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.4.2 | Integer32 | RO | |
| SufdNoLtDAutoDisabled | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.4.3 | Integer32 | RO | |
| SufdClearStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.4.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this value to clear(2) clears the UFD stats.
| ||||
| Nlayer2Info | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3 | |||
| NcistInfo | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1 | |||
| NcistGeneralInfo | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1 | |||
| ScistRoot | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1.1 | BridgeId | RO | |
scalar · BridgeId · read-only · current The bridge identifier of the Root of the common spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the CIST Root Identifier parameter in all Configuration Bridge PDUs originated by this node. | ||||
| ScistRootPathCost | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1.2 | Integer32 | RO | |
scalar · Integer32 · read-only · current The cost of the path to the CIST Root as seen from this bridge. | ||||
| ScistRootPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current The Port Number of the Port which offers the lowest path cost from this bridge to the CIST Root Bridge. | ||||
| ScistRootHelloTime | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1.4 | Integer32 | RO | |
scalar · Integer32 · read-only · current The amount of time between the transmission of Configuration bridge PDUs in seconds. | ||||
| ScistRootMaxAge | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1.5 | Integer32 | RO | |
scalar · Integer32 · read-only · current The value in seconds that all bridges use for MaxAge when this bridge is acting as the root. | ||||
| ScistRootForwardDelay | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1.6 | Integer32 | RO | |
scalar · Integer32 · read-only · current The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root. | ||||
| ScistRegionalRoot | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1.7 | BridgeId | RO | |
scalar · BridgeId · read-only · current The bridge identifier of the Root of the Multiple spanning tree region as determined by the Spanning Tree Protocol as executed by this node. This value is used as the CIST Regional Root Identifier parameter in all Configuration Bridge PDUs originated by this node. | ||||
| ScistRegionalPathCost | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1.8 | Integer32 | RO | |
scalar · Integer32 · read-only · current The Cost of the path to the CIST Regional Root as seen from this bridge. | ||||
| ScistBridgePriority | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1.9 | INTEGER (0..65535) | RO | |
scalar · INTEGER (0..65535) · read-only · current The value of the writable portion of the Brigde Identifier comprising of the first two octets. | ||||
| ScistBridgeMaxAge | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1.10 | INTEGER (6..40) | RO | |
scalar · INTEGER (6..40) · read-only · current The value in seconds that all bridges use for MaxAge when this bridge is acting as the root. | ||||
| ScistBridgeForwardDelay | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1.11 | INTEGER (4..30) | RO | |
scalar · INTEGER (4..30) · read-only · current The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root. | ||||
| ScistMaxHopCount | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1.12 | INTEGER (4..60) | RO | |
scalar · INTEGER (4..60) · read-only · current Indicates the maximum hop count value. | ||||
| SmstpDigest | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1.13 | DisplayString (SIZE (0..63)) | RO | |
scalar · DisplayString (SIZE (0..63)) · read-only · current The digest of the mstp. | ||||
| TcistInfoPortTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2 | NA | ||
table · not-accessible · current The table of CIST Port information. | ||||
| RcistInfoPortTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2.1 | NA | ||
| CcistInfoPortIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The port number of the port for which this entry contains spanning tree configuration. | ||||
| CcistInfoPortPriority | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting this value. | ||||
| CcistInfoPortPathCost | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The contribution of this port to the path cost of paths towards the CIST Root which include this port. | ||||
| CcistInfoPortState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Current state of the Port as defined by the Common spanning tree protocol.
| ||||
| CcistInfoPortRole | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Selected Port Role of the port for this spanning tree instance.
| ||||
| CcistInfoPortDesignatedBridge | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2.1.6 | BridgeId | RO | |
column · BridgeId · read-only · current The unique Bridge Identifier of the bridge which this port considers to be the Designated Bridge for the port's segment. | ||||
| CcistInfoPortDesignatedPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2.1.7 | OCTET STRING (SIZE (2)) | RO | |
column · OCTET STRING (SIZE (2)) · read-only · current The Port identifier of the port on the Designated Bridge for this port's segment. | ||||
| CcistInfoPortLinkType | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The point-to-point status of the LAN segment attached to this port. A value of p2p (2) indicates that this port is being treated as if it is connected to a point-to-point link. A value of shared(3) indicates that this port is being treated as having a shared media connection.
| ||||
| CcistInfoPortHelloTime | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2.1.9 | INTEGER (1..10) | RO | |
column · INTEGER (1..10) · read-only · current The amount of time between the transmission of Configuration Port PDUs in seconds. | ||||
| NfdbInfo | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2 | |||
| SfdbClear | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this value to clear(2) clears the entire master FDB.
| ||||
| TfdbTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2.2 | NA | ||
table · not-accessible · current The table of FDB entries. | ||||
| RfdbEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2.2.1 | NA | ||
| CfdbMacAddr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2.2.1.1 | PhysAddress | RO | |
column · PhysAddress · read-only · current The MAC address for the FDB entry. | ||||
| CfdbVlan | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2.2.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The VLAN ID for the FDB entry. | ||||
| CfdbSrcPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2.2.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance has been seen. A value of '0' indicates that the port number has not been learned but that the bridge does have some forwarding/filtering information about this address. | ||||
| CfdbState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2.2.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The state of the FDB entry. The meanings of the values are :
unknown(1) : the MAC address has not yet been learned by the switch
but has only been seen as a destination address
forward(2) : the MAC address has been learned by the switch
trunk(3) : frames with this MAC address are forwarded to trunk
group
| ||||
| CfdbRefSps | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2.2.1.5 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current The referenced SPs associated with this FDB entry. | ||||
| CfdbLearnedPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2.2.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The learned port associated with this FDB entry. | ||||
| CfdbSrcTrunk | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2.2.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current Either the value '0', or the trunk number of the trunk on which a frame having a source address equal to the value of the corresponding instance has been seen. A value of '0' indicates that the source address is not associated with a trunk. | ||||
| CfdbStatus | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2.2.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current '1' if it is permanent '0' if it is not permanent | ||||
| NstpInfo | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3 | |||
| TstpInfoTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1 | NA | ||
table · not-accessible · current The table of Spanning Tree Group information. | ||||
| RstpInfoTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1 | NA | ||
| CstpInfoIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB. | ||||
| CstpInfoState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Turn on of off Spanning Tree operation of a particular Spanning Tree Group.
| ||||
| CstgInfoVlanBmap | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.3 | OCTET STRING (SIZE (0..512)) | RO | |
column · OCTET STRING (SIZE (0..512)) · read-only · current The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4096.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1 (as index to stgCurCfgTable)
where x : 1 - The represented vlan applied to the spanning tree.
0 - The represented vlan not applied to the spanning tree | ||||
| CstpInfoTimeSinceTopChange | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.4 | TimeTicks | RO | |
column · TimeTicks · read-only · current The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. | ||||
| CstpInfoTopChanges | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of topology changes detected by this bridge since the management entity was last reset or initialized. | ||||
| CstpInfoDesignatedRoot | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.6 | BridgeId | RO | |
column · BridgeId · read-only · current The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node. | ||||
| CstpInfoRootCost | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The cost of the path to the root as seen from this bridge. | ||||
| CstpInfoRootPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current The port number of the port which offers the lowest cost path from this bridge to the root bridge. | ||||
| CstpInfoMaxAge | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using. | ||||
| CstpInfoHelloTime | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using. | ||||
| CstpInfoForwardDelay | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. | ||||
| CstpInfoHoldTime | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.12 | Integer32 | RO | |
column · Integer32 · read-only · current This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second. | ||||
| CstpInfoBrgPriority | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.13 | INTEGER (0..65535) | RO | |
column · INTEGER (0..65535) · read-only · current The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. | ||||
| CstpInfoBrgHelloTime | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.14 | INTEGER (1..10) | RO | |
column · INTEGER (1..10) · read-only · current The value in seconds that all bridges use for HelloTime when this bridge is acting as the root. | ||||
| CstpInfoBrgForwardDelay | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.15 | INTEGER (4..30) | RO | |
column · INTEGER (4..30) · read-only · current The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root. | ||||
| CstpInfoBrgMaxAge | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.16 | INTEGER (6..40) | RO | |
column · INTEGER (6..40) · read-only · current The value in seconds that all bridges use for MaxAge when this bridge is acting as the root. | ||||
| CstpInfoAgingTime | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.17 | INTEGER (0..65535) | RO | |
column · INTEGER (0..65535) · read-only · current The timeout period in seconds for aging out dynamically learned forwarding information. | ||||
| TstpInfoPortTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2 | NA | ||
table · not-accessible · current The table of Spanning Tree Group port information. | ||||
| RstpInfoPortTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2.1 | NA | ||
row · not-accessible · current Information about port configuration for a particular Spanning Tree Group. | ||||
| CstpInfoPortStpIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The identifier of a particular Spanning Tree Group. | ||||
| CstpInfoPortIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The port identifier of a particular Spanning Tree Group. | ||||
| CstpInfoPortState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled, this object will have a value of disabled(1).
| ||||
| CstpInfoPortDesignatedRoot | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2.1.4 | BridgeId | RO | |
column · BridgeId · read-only · current The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached. | ||||
| CstpInfoPortDesignatedCost | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. | ||||
| CstpInfoPortDesignatedBridge | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2.1.6 | BridgeId | RO | |
column · BridgeId · read-only · current The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment. | ||||
| CstpInfoPortDesignatedPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2.1.7 | OCTET STRING (SIZE (2)) | RO | |
column · OCTET STRING (SIZE (2)) · read-only · current The Port Identifier of the port on the Designated Bridge for this port's segment. | ||||
| CstpInfoPortForwardTransitions | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The number of times this port has transitioned from the Learning state to the Forwarding state. | ||||
| CstpInfoPortPathCost | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current The path cost of the port. | ||||
| NlacpInfo | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4 | |||
| TlacpInfoAggrTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1 | NA | ||
table · not-accessible · current The table of LACP aggregator information. | ||||
| RlacpInfoAggrTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1 | NA | ||
| ClacpInfoAggrIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The aggregator identifier. | ||||
| ClacpInfoAggrId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.2 | Integer32 | RO | |
| ClacpInfoAggrMac | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.3 | DisplayString | RO | |
| ClacpInfoAggrActSysPrio | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.4 | Integer32 | RO | |
| ClacpInfoAggrActSysId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.5 | DisplayString | RO | |
| ClacpInfoAggrIndivState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current
| ||||
| ClacpInfoAggrActAdminKey | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.7 | Integer32 | RO | |
| ClacpInfoAggrActOperKey | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.8 | Integer32 | RO | |
| ClacpInfoAggrPartSysPrio | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.9 | Integer32 | RO | |
| ClacpInfoAggrPartSysId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.10 | DisplayString | RO | |
| ClacpInfoAggrPartOperKey | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.11 | Integer32 | RO | |
| ClacpInfoAggrReadyState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current
| ||||
| ClacpInfoAggrNumPorts | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.13 | Integer32 | RO | |
| ClacpInfoAggrPorts | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.14 | DisplayString | RO | |
| NlacpInfoPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2 | |||
| TlacpInfoPortGeneralTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1 | NA | ||
table · not-accessible · current The table of LACP port general information. | ||||
| RlacpInfoPortGeneralTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1 | NA | ||
| ClacpInfoPortGeneralIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The port identifier. | ||||
| ClacpInfoPortLacpEna | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current
| ||||
| ClacpInfoPortAdminEna | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current
| ||||
| ClacpInfoPortActSysId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.4 | DisplayString | RO | |
| ClacpInfoPortActSysPrio | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.5 | Integer32 | RO | |
| ClacpInfoPortActAdminKey | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.6 | Integer32 | RO | |
| ClacpInfoPortActOperKey | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.7 | Integer32 | RO | |
| ClacpInfoPortActPortNum | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.8 | Integer32 | RO | |
| ClacpInfoPortActPortPrio | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.9 | Integer32 | RO | |
| ClacpInfoPortIndivState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current
| ||||
| ClacpInfoSelAggrId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.11 | Integer32 | RO | |
| ClacpInfoAttAggrId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.12 | Integer32 | RO | |
| ClacpInfoPortReadyN | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current True value for Ready_N flag indicates that the wait while timer has expired and it is waiting to attach to an aggregator. There is one Ready_N value for each port.
| ||||
| ClacpInfoPortNtt | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.14 | INTEGER | RO | |
column · INTEGER · read-only · current Need to transmit flag. True indicates that there is new protocol information that should be transmitted on the link.
| ||||
| ClacpInfoPortSelected | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.15 | INTEGER | RO | |
column · INTEGER · read-only · current Selected flag value indicates that the selection logic has selected an appropriate Aggregator. A value of unselected indicates that no aggregator is currently selected. A value of standby indicates that although the selection logic has selected an appropriate Aggregator, aggregation restrictions currently precent the port from being enabled as part of the aggregation, and so the port is being held in standby condition.
| ||||
| ClacpInfoPortMoved | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.16 | INTEGER | RO | |
column · INTEGER · read-only · current Port Moved flag is set to true if the receive machine for a port is in the port_disabled state, and the combination of partner oper system and partner oper port number in use by the port has been used by received in an incoming LACPDU on a different port.
| ||||
| ClacpInfoCollDetState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.17 | INTEGER | RO | |
column · INTEGER · read-only · current
| ||||
| ClacpInfoPortRxState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.18 | DisplayString | RO | |
| ClacpInfoPortMuxState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.19 | DisplayString | RO | |
| ClacpInfoPortPerState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.20 | DisplayString | RO | |
| TlacpInfoPortAdminTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2 | NA | ||
table · not-accessible · current The table of LACP port admin information. | ||||
| RlacpInfoPortAdminTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1 | NA | ||
| ClacpInfoPortAdminIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The port identifier. | ||||
| ClacpInfoPortActAdPortState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current The state of Actor Administrator Port. This is a octet mask with the following bits: Activity, Synchronization, Defaulted, Timeout, Collecting, Expired, Aggregation and Distributing. If all of them are 0 then the state is showed as 0x0, else it is displayed a blank state which mean is not a NULL state | ||||
| ClacpInfoPortActAdActiv | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current
| ||||
| ClacpInfoPortActAdSync | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current
| ||||
| ClacpInfoPortActAdDef | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current
| ||||
| ClacpInfoPortActAdTimeout | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current
| ||||
| ClacpInfoPortActAdColl | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current
| ||||
| ClacpInfoPortActAdExp | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current
| ||||
| ClacpInfoPortActAdAggr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1.14 | INTEGER | RO | |
column · INTEGER · read-only · current
| ||||
| ClacpInfoPortActAdDist | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1.15 | INTEGER | RO | |
column · INTEGER · read-only · current
| ||||
| TlacpInfoPortOperTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3 | NA | ||
table · not-accessible · current The table of LACP port oper information. | ||||
| RlacpInfoPortOperTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1 | NA | ||
| ClacpInfoPortOperIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The port identifier. | ||||
| ClacpInfoPortPartOpSysPrio | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.2 | Integer32 | RO | |
| ClacpInfoPortPartOpSysId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.3 | DisplayString | RO | |
| ClacpInfoPortPartOpKey | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.4 | Integer32 | RO | |
| ClacpInfoPortPartOpPortNum | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.5 | Integer32 | RO | |
| ClacpInfoPortPartOpPortPrio | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.6 | Integer32 | RO | |
| ClacpInfoPortActOpPortState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current The state of Actor Operator Port. This is a octet mask with the following bits: Activity, Synchronization, Defaulted, Timeout, Collecting, Expired, Aggregation and Distributing. If all of them are 0 then the state is showed as 0x0, else it is displayed a blank state which mean is not a NULL state | ||||
| ClacpInfoPortActOpActiv | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current
| ||||
| ClacpInfoPortActOpSync | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current
| ||||
| ClacpInfoPortActOpDef | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current
| ||||
| ClacpInfoPortActOpTimeout | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current
| ||||
| ClacpInfoPortActOpColl | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current
| ||||
| ClacpInfoPortActOpExp | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current
| ||||
| ClacpInfoPortActOpAggr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.14 | INTEGER | RO | |
column · INTEGER · read-only · current
| ||||
| ClacpInfoPortActOpDist | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.15 | INTEGER | RO | |
column · INTEGER · read-only · current
| ||||
| ClacpInfoPortPartOpPortState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.16 | DisplayString | RO | |
column · DisplayString · read-only · current The state of Partner Operator Port. This is a octet mask with the following bits: Activity, Synchronization, Defaulted, Timeout, Collecting, Expired, Aggregation and Distributing. If all of them are 0 then the state is showed as 0x0, else it is displayed a blank state which mean is not a NULL state | ||||
| ClacpInfoPortPartOpActiv | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.17 | INTEGER | RO | |
column · INTEGER · read-only · current
| ||||
| ClacpInfoPortPartOpSync | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.18 | INTEGER | RO | |
column · INTEGER · read-only · current
| ||||
| ClacpInfoPortPartOpDef | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.19 | INTEGER | RO | |
column · INTEGER · read-only · current
| ||||
| ClacpInfoPortPartOpTimeout | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.20 | INTEGER | RO | |
column · INTEGER · read-only · current
| ||||
| ClacpInfoPortPartOpColl | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.21 | INTEGER | RO | |
column · INTEGER · read-only · current
| ||||
| ClacpInfoPortPartOpExp | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.22 | INTEGER | RO | |
column · INTEGER · read-only · current
| ||||
| ClacpInfoPortPartOpAggr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.23 | INTEGER | RO | |
column · INTEGER · read-only · current
| ||||
| ClacpInfoPortPartOpDist | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.24 | INTEGER | RO | |
column · INTEGER · read-only · current
| ||||
| Ndot1xInfo | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5 | |||
| Tdot1xInfoPortTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.1 | NA | ||
table · not-accessible · current The table of 8021x configuration in the Current_config. | ||||
| Rdot1xInfoPortEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.1.1 | NA | ||
| Cdot1xInfoPortIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The 8021x Port number for which the table is related. | ||||
| Cdot1xInfoPortAuthMode | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Authentication mode
| ||||
| Cdot1xInfoPortAuthStatus | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Authentication status
| ||||
| Cdot1xInfoPortCtrlDir | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Controlled Directions
| ||||
| Cdot1xInfoPortAuthPAEState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Authenticator PAE State
| ||||
| Cdot1xInfoPortBackAuthState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Backend authenticator PAE state
| ||||
| Ndot1xSystemInfo | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.2 | |||
| Sdot1xSystemCapability | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.2.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current System capability
| ||||
| Sdot1xSystemStatus | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.2.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current System status
| ||||
| Sdot1xSystemProtoVersion | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.2.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current Protocol version | ||||
| Ndot1pInfo | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6 | |||
| Tdot1pInfoPriorityCOSTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.1 | NA | ||
table · not-accessible · current The table of current priority to COS queue information. | ||||
| Rdot1pInfoPriorityCOSEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.1.1 | NA | ||
row · not-accessible · current Current information about 8021p priority to COS queue. | ||||
| Cdot1pInfoPriorityIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.1.1.1 | INTEGER (0..7) | RO | |
column · INTEGER (0..7) · read-only · current The 8021p priority for which the table is related. | ||||
| Cdot1pInfoPriorityCOSQueue | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The 8021p priority COSq. | ||||
| Cdot1pInfoPriorityCOSWeight | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The 8021p priority weight. | ||||
| Tdot1pInfoPortTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.2 | NA | ||
table · not-accessible · current The table of 8021p port priority configuration in the Current_config. | ||||
| Rdot1pInfoPortEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.2.1 | NA | ||
| Cdot1pInfoPortIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The 8021p Port number for which the table is related. | ||||
| Cdot1pInfoPortPriority | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The 8021p Port number for which the table is related. | ||||
| Cdot1pInfoPortCOSq | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The 8021p port COSq. | ||||
| Cdot1pInfoPortWeight | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.2.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The 8021p port weight. | ||||
| NgenInfo | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.7 | |||
| SgeneralInfoStpUplinkFast | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.7.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current STP uplink fast mode
| ||||
| SgeneralInfoUplinkFastRate | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.7.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current STP fast uplink rate. | ||||
| NvlanInfo | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.8 | |||
| TvlanInfoTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.8.1 | NA | ||
table · not-accessible · current The table of VLAN information. | ||||
| RvlanInfoTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.8.1.1 | NA | ||
| CvlanInfoId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.8.1.1.1 | INTEGER (1..4095) | RO | |
column · INTEGER (1..4095) · read-only · current The VLAN identifier. | ||||
| CvlanInfoName | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.8.1.1.2 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current The VLAN name. | ||||
| CvlanInfoStatus | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.8.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable, VLAN state information
| ||||
| CvlanInfoPorts | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.8.1.1.4 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The port list information in the VLAN. The ports are presented
in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VLAN
0 - The represented port does not belong to the VLAN | ||||
| NtrunkGroupInfo | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9 | |||
| TtrunkGroupInfoTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.1 | NA | ||
table · not-accessible · current The table of trunk group information. | ||||
| RtrunkGroupInfoTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.1.1 | NA | ||
| CtrunkGroupInfoIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The identifier of the trunk group. | ||||
| CtrunkGroupInfoState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Trunk group state.
| ||||
| CtrunkGroupInfoPorts | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.1.1.3 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The port list in the trunk group. The ports are presented in
bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the trunk group
0 - The represented port does not belong to the trunk group | ||||
| CtrunkGroupInfoProtocol | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Trunk group protocol Static - static trunk group Lacp - dynamic trunk group
| ||||
| CtrunkGroupInfoStgs | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.1.1.5 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The stg list the trunk group is in. The stgs are presented in bitmap format. | ||||
| TtrunkGroupInfoPortTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.2 | NA | ||
table · not-accessible · current The table of Trunk Group Info. | ||||
| RtrunkGroupInfoPortTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.2.1 | NA | ||
row · not-accessible · current A row in the Trunk Info table. | ||||
| CtrunkGroupInfoPortTrunkId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The Trunk identifier. | ||||
| CtrunkGroupInfoPortPortId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.2.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The Port identifier. | ||||
| CtrunkGroupInfoPortStatus | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The Port Status.
| ||||
| Nlayer2Oper | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.4 | |||
| Nlayer3 | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3 | |||
| Nlayer3Configs | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1 | |||
| NipInterfaceCfg | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1 | |||
| SipInterfaceTableMax | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the IP interface table. | ||||
| TipCurCfgIntfTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.2 | NA | ||
table · not-accessible · current The table of IP interface configuration. | ||||
| RipCurCfgIntfEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.2.1 | NA | ||
| CipCurCfgIntfIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The interface number for which the IP information is related. | ||||
| CipCurCfgIntfAddr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.2.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address of the interface. | ||||
| CipCurCfgIntfMask | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.2.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The subnet mask of the interface. | ||||
| CipCurCfgIntfBroadcast | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.2.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current The broadcast address of the interface. | ||||
| CipCurCfgIntfVlan | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.2.1.5 | INTEGER (1..4094) | RO | |
column · INTEGER (1..4094) · read-only · current The VLAN associated with the interface. | ||||
| CipCurCfgIntfState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.2.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The state of the interface.
| ||||
| CipCurCfgIntfBootpRelay | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.2.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Enable/disable BOOTP relay.
| ||||
| TipNewCfgIntfTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.3 | NA | ||
table · not-accessible · current The table of interface configuration in the New Configuration Block. | ||||
| RipNewCfgIntfEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.3.1 | NA | ||
| CipNewCfgIntfIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The interface number for which the IP information is related. | ||||
| CipNewCfgIntfAddr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.3.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The IP address of the interface. | ||||
| CipNewCfgIntfMask | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.3.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current The subnet mask of the interface. | ||||
| CipNewCfgIntfVlan | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.3.1.5 | INTEGER (1..4094) | RC | |
column · INTEGER (1..4094) · read-create · current The VLAN associated with the interface. | ||||
| CipNewCfgIntfState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.3.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current The state of the interface.
| ||||
| CipNewCfgIntfDelete | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.3.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
| ||||
| CipNewCfgIntfBootpRelay | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.3.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current Enable/disable BOOTP relay.
| ||||
| NipGatewayCfg | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2 | |||
| SipGatewayTableMax | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the IP gateway table. | ||||
| TipCurCfgGwTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.4 | NA | ||
table · not-accessible · current The table of gateways in the Current configuration Block. | ||||
| RipCurCfgGwEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.4.1 | NA | ||
| CipCurCfgGwIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The gateway number for which the information is related. | ||||
| CipCurCfgGwAddr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.4.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address of the default gateway. | ||||
| CipCurCfgGwInterval | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.4.1.3 | INTEGER (0..60) | RO | |
column · INTEGER (0..60) · read-only · current The interval between ping attempts. | ||||
| CipCurCfgGwRetry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.4.1.4 | INTEGER (1..120) | RO | |
column · INTEGER (1..120) · read-only · current The number of failed attempts to declare the default gateway DOWN. | ||||
| CipCurCfgGwState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.4.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The state of the default gateway.
| ||||
| CipCurCfgGwArp | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.4.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The state of ARP only health checks.
| ||||
| TipNewCfgGwTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.5 | NA | ||
table · not-accessible · current The table of gateway configuration in the new configuration block. | ||||
| RipNewCfgGwEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.5.1 | NA | ||
| CipNewCfgGwIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.5.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The gateway number for which the information is related. | ||||
| CipNewCfgGwAddr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.5.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The IP address of the default gateway. | ||||
| CipNewCfgGwInterval | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.5.1.3 | INTEGER (0..60) | RC | |
column · INTEGER (0..60) · read-create · current The interval in seconds between ping attempts. | ||||
| CipNewCfgGwRetry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.5.1.4 | INTEGER (1..120) | RC | |
column · INTEGER (1..120) · read-create · current The number of failed attempts to declare the default gateway DOWN. | ||||
| CipNewCfgGwState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.5.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current The state of the default gateway.
| ||||
| CipNewCfgGwDelete | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.5.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
| ||||
| CipNewCfgGwArp | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.5.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current The state of the ARP only health checks.
| ||||
| NipStaticRouteCfg | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3 | |||
| SipStaticRouteTableMaxSize | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the Static Route table. | ||||
| TipCurCfgStaticRouteTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.2 | NA | ||
table · not-accessible · current The table of static routes in the current configuration block. | ||||
| RipCurCfgStaticRouteEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.2.1 | NA | ||
| CipCurCfgStaticRouteIndx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the static routing table. | ||||
| CipCurCfgStaticRouteDestIp | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.2.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The destination IP address of this route. | ||||
| CipCurCfgStaticRouteMask | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.2.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The destination IP address of this route. | ||||
| CipCurCfgStaticRouteGateway | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.2.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current The destination IP address of this route. | ||||
| CipCurCfgStaticRouteInterface | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.2.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The IP interface of this route. The IP address of the specified interface shall be use as source IP when performs routing. | ||||
| TipNewCfgStaticRouteTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.3 | NA | ||
table · not-accessible · current The table of static routes in the new configuration block. | ||||
| RipNewCfgStaticRouteEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.3.1 | NA | ||
| CipNewCfgStaticRouteIndx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the static routing table. | ||||
| CipNewCfgStaticRouteDestIp | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.3.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The destination IP address of this route. | ||||
| CipNewCfgStaticRouteMask | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.3.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current The subnet mask of this route. | ||||
| CipNewCfgStaticRouteGateway | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.3.1.4 | IpAddress | RC | |
column · IpAddress · read-create · current The IP address of the gateway for this route. | ||||
| CipNewCfgStaticRouteAction | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.3.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
| ||||
| CipNewCfgStaticRouteInterface | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.3.1.6 | Integer32 | RC | |
column · Integer32 · read-create · current The IP interface of this route. The IP address of the specified interface shall be use as source IP when performs routing. | ||||
| SipStaticRouteClearAllByDestIp | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.4 | IpAddress | RW | |
scalar · IpAddress · read-write · current Clears all static routes with the specified destination IP address. | ||||
| SipStaticRouteClearAllByGatewayIp | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.5 | IpAddress | RW | |
scalar · IpAddress · read-write · current Clears all static routes with the specified gateway IP address. | ||||
| SipStaticRouteClearAllByInterface | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Clears all routes on the specified inteface number. | ||||
| SipStaticRouteClearAll | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current When set to clear(2),clears all static routes. Otherwhise nothing is done.
| ||||
| NipForwardCfg | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.4 | |||
| NipFwdGeneralCfg | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.4.1 | |||
| SipFwdCurCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.4.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current IP forwarding global state.
| ||||
| SipFwdNewCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.4.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current IP forwarding global state.
| ||||
| SipFwdCurCfgDirectedBcast | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.4.1.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable forwarding directed broadcasts.
| ||||
| SipFwdNewCfgDirectedBcast | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.4.1.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable forwarding directed broadcasts.
| ||||
| NvrrpCfg | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6 | |||
| NvrrpGeneral | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.1 | |||
| SvrrpCurCfgGenState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable VRRP operation globally.
| ||||
| SvrrpNewCfgGenState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable VRRP operation globally.
| ||||
| SvrrpCurCfgGenTckVirtRtrInc | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.1.3 | INTEGER (0..254) | RO | |
scalar · INTEGER (0..254) · read-only · current The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other virtual routers. | ||||
| SvrrpNewCfgGenTckVirtRtrInc | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.1.4 | INTEGER (0..254) | RW | |
scalar · INTEGER (0..254) · read-write · current The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other virtual routers. | ||||
| SvrrpCurCfgGenTckIpIntfInc | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.1.5 | INTEGER (0..254) | RO | |
scalar · INTEGER (0..254) · read-only · current The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other router interfaces. | ||||
| SvrrpNewCfgGenTckIpIntfInc | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.1.6 | INTEGER (0..254) | RW | |
scalar · INTEGER (0..254) · read-write · current The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other router interfaces. | ||||
| SvrrpCurCfgGenTckVlanPortInc | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.1.7 | INTEGER (0..254) | RO | |
scalar · INTEGER (0..254) · read-only · current The increment of VRRP virtual router priority. The priority is adjusted by tracking the port state of ports that belongs to the same virtual LAN as the virtual router. | ||||
| SvrrpNewCfgGenTckVlanPortInc | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.1.8 | INTEGER (0..254) | RW | |
scalar · INTEGER (0..254) · read-write · current The increment of VRRP virtual router priority. The priority is adjusted by tracking the port state of ports that belongs to the same virtual LAN as the virtual router. | ||||
| SvrrpVirtRtrTableMaxSize | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.2 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of entries in VRRP virtual router table. | ||||
| TvrrpCurCfgVirtRtrTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3 | NA | ||
table · not-accessible · current The table of VRRP virtual routers configuration in current_config. | ||||
| RvrrpCurCfgVirtRtrTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1 | NA | ||
| CvrrpCurCfgVirtRtrIndx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The VRRP virtual router table index. | ||||
| CvrrpCurCfgVirtRtrID | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.2 | INTEGER (1..255) | RO | |
column · INTEGER (1..255) · read-only · current The VRRP virtual router identifier. | ||||
| CvrrpCurCfgVirtRtrAddr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The VRRP virtual router IP address. | ||||
| CvrrpCurCfgVirtRtrIfIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The IfIndex that the VRRP virtual router is representing. | ||||
| CvrrpCurCfgVirtRtrInterval | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.5 | INTEGER (1..255) | RO | |
column · INTEGER (1..255) · read-only · current The time interval between VRRP advertisements in seconds. | ||||
| CvrrpCurCfgVirtRtrPriority | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.6 | INTEGER (1..254) | RO | |
column · INTEGER (1..254) · read-only · current The priority value to be used by the specified VRRP virtual routers. | ||||
| CvrrpCurCfgVirtRtrPreempt | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption
| ||||
| CvrrpCurCfgVirtRtrState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable the VRRP virtual router.
| ||||
| CvrrpCurCfgVirtRtrTckVirtRtr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable tracking other virtual routers for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckVirtRtrInc.
| ||||
| CvrrpCurCfgVirtRtrTckIpIntf | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable tracking other router interfaces for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckIpIntfInc.
| ||||
| CvrrpCurCfgVirtRtrTckVlanPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable tracking port state of VLAN ports for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckVlanPortInc.
| ||||
| TvrrpNewCfgVirtRtrTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4 | NA | ||
table · not-accessible · current The table of VRRP virtual routers configuration in current_config. | ||||
| RvrrpNewCfgVirtRtrTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1 | NA | ||
| CvrrpNewCfgVirtRtrIndx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The VRRP virtual router table index. | ||||
| CvrrpNewCfgVirtRtrID | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.2 | INTEGER (1..255) | RW | |
column · INTEGER (1..255) · read-write · current The VRRP virtual router identifier. | ||||
| CvrrpNewCfgVirtRtrAddr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current The VRRP virtual router IP address. | ||||
| CvrrpNewCfgVirtRtrIfIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.4 | Integer32 | RC | |
column · Integer32 · read-create · current The IfIndex that the VRRP virtual router is representing. | ||||
| CvrrpNewCfgVirtRtrInterval | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.5 | INTEGER (1..255) | RC | |
column · INTEGER (1..255) · read-create · current The time interval between VRRP advertisements in seconds. | ||||
| CvrrpNewCfgVirtRtrPriority | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.6 | INTEGER (1..254) | RC | |
column · INTEGER (1..254) · read-create · current The priority value to be used by the specified VRRP virtual router. | ||||
| CvrrpNewCfgVirtRtrPreempt | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption
| ||||
| CvrrpNewCfgVirtRtrState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable the VRRP virtual router.
| ||||
| CvrrpNewCfgVirtRtrDelete | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.9 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effect on the state of the row.
| ||||
| CvrrpNewCfgVirtRtrTckVirtRtr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.11 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable tracking other virtual routers for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVirtRtrInc.
| ||||
| CvrrpNewCfgVirtRtrTckIpIntf | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.12 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckIpIntfInc.
| ||||
| CvrrpNewCfgVirtRtrTckVlanPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.13 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVlanPortInc.
| ||||
| SvrrpIfTableMaxSize | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.5 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of entries in VRRP interface table. | ||||
| TvrrpCurCfgIfTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.6 | NA | ||
table · not-accessible · current The table of VRRP interface configuration in current_config. | ||||
| RvrrpCurCfgIfTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.6.1 | NA | ||
| CvrrpCurCfgIfIndx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.6.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The VRRP interface index. This is eqivalent to IfIndex. | ||||
| CvrrpCurCfgIfAuthType | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.6.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Type of authentication being used.
none(1) - no authentication
simple-text-password(2) - use password specified in
vrrpCurCfgIfPasswd for authentication.
| ||||
| CvrrpCurCfgIfPasswd | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.6.1.3 | DisplayString (SIZE (0..8)) | RO | |
column · DisplayString (SIZE (0..8)) · read-only · current The password for authentication. | ||||
| TvrrpNewCfgIfTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.7 | NA | ||
table · not-accessible · current The table of VRRP interface configuration in current_config. | ||||
| RvrrpNewCfgIfTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.7.1 | NA | ||
| CvrrpNewCfgIfIndx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.7.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The VRRP interface index. This is eqivalent to IfIndex. | ||||
| CvrrpNewCfgIfAuthType | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.7.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current Type of authentication being used.
none(1) - no authentication
simple-text-password(2) - use password specified in
vrrpNewCfgIfPasswd for authentication.
| ||||
| CvrrpNewCfgIfPasswd | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.7.1.3 | DisplayString (SIZE (0..8)) | RC | |
column · DisplayString (SIZE (0..8)) · read-create · current The password for authentication. | ||||
| CvrrpNewCfgIfDelete | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.7.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effect on the state of the row.
| ||||
| SvrrpVirtRtrGrpTableMaxSize | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.8 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of entries in VRRP Group table. | ||||
| TvrrpCurCfgVirtRtrGrpTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9 | NA | ||
table · not-accessible · current The table of VRRP virtual router group in current_config. | ||||
| RvrrpCurCfgVirtRtrGrpTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9.1 | NA | ||
row · not-accessible · current Information about a VRRP failover virtual router. | ||||
| CvrrpCurCfgVirtRtrGrpIndx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The VRRP virtual router table index. | ||||
| CvrrpCurCfgVirtRtrGrpID | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9.1.2 | INTEGER (1..255) | RO | |
column · INTEGER (1..255) · read-only · current The VRRP virtual router identifier. | ||||
| CvrrpCurCfgVirtRtrGrpIfIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The IfIndex that the VRRP virtual router is representing. | ||||
| CvrrpCurCfgVirtRtrGrpInterval | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9.1.4 | INTEGER (1..255) | RO | |
column · INTEGER (1..255) · read-only · current The time interval between VRRP advertisements in seconds. | ||||
| CvrrpCurCfgVirtRtrGrpPriority | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9.1.5 | INTEGER (1..254) | RO | |
column · INTEGER (1..254) · read-only · current The priority value to be used by the specified VRRP virtual routers. | ||||
| CvrrpCurCfgVirtRtrGrpPreempt | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption
| ||||
| CvrrpCurCfgVirtRtrGrpState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable the VRRP virtual router.
| ||||
| CvrrpCurCfgVirtRtrGrpTckIpIntf | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckIpIntfInc.
| ||||
| CvrrpCurCfgVirtRtrGrpTckVlanPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckVlanPortInc.
| ||||
| TvrrpNewCfgVirtRtrGrpTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10 | NA | ||
table · not-accessible · current The table of VRRP virtual router group configuration in new_config. | ||||
| RvrrpNewCfgVirtRtrGrpTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1 | NA | ||
row · not-accessible · current Information about a VRRP failover virtual router. | ||||
| CvrrpNewCfgVirtRtrGrpIndx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The VRRP virtual router table index. | ||||
| CvrrpNewCfgVirtRtrGrpID | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1.2 | INTEGER (1..255) | RC | |
column · INTEGER (1..255) · read-create · current The VRRP virtual router identifier. | ||||
| CvrrpNewCfgVirtRtrGrpIfIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1.3 | Integer32 | RC | |
column · Integer32 · read-create · current The IfIndex that the VRRP virtual router is representing. | ||||
| CvrrpNewCfgVirtRtrGrpInterval | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1.4 | INTEGER (1..255) | RC | |
column · INTEGER (1..255) · read-create · current The time interval between VRRP advertisements in seconds. | ||||
| CvrrpNewCfgVirtRtrGrpPriority | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1.5 | INTEGER (1..254) | RC | |
column · INTEGER (1..254) · read-create · current The priority value to be used by the specified VRRP virtual router. | ||||
| CvrrpNewCfgVirtRtrGrpPreempt | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption
| ||||
| CvrrpNewCfgVirtRtrGrpState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable the VRRP virtual router.
| ||||
| CvrrpNewCfgVirtRtrGrpDelete | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effect on the state of the row.
| ||||
| CvrrpNewCfgVirtRtrGrpTckIpIntf | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1.11 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckIpIntfInc.
| ||||
| CvrrpNewCfgVirtRtrGrpTckVlanPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1.12 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVlanPortInc.
| ||||
| NarpCfg | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7 | |||
| SarpCurCfgReARPPeriod | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.1 | INTEGER (2..120) | RO | |
scalar · INTEGER (2..120) · read-only · current Re-ARP Period in seconds. | ||||
| SarpNewCfgReARPPeriod | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.2 | INTEGER (2..120) | RW | |
scalar · INTEGER (2..120) · read-write · current Re-ARP Period in seconds. | ||||
| SipStaticArpTableMaxSize | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.3 | INTEGER (1..128) | RO | |
scalar · INTEGER (1..128) · read-only · current The maximum number of rows in the Static ARP table. | ||||
| TipCurCfgStaticArpTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.4 | NA | ||
table · not-accessible · current The table of static ARPs in the current configuration block. | ||||
| RipCurCfgStaticArpEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.4.1 | NA | ||
| CipCurCfgStaticArpIndx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the static ARP table. | ||||
| CipCurCfgStaticArpIp | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.4.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address for the ARP entry. | ||||
| CipCurCfgStaticArpMAC | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.4.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current The MAC address for the ARP entry. | ||||
| CipCurCfgStaticArpVlan | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.4.1.4 | INTEGER (1..4095) | RO | |
column · INTEGER (1..4095) · read-only · current The VLAN for the ARP entry. | ||||
| CipCurCfgStaticArpPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.4.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The port for the ARP entry. | ||||
| TipNewCfgStaticArpTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.5 | NA | ||
table · not-accessible · current The table of static ARPs in the new configuration block. | ||||
| RipNewCfgStaticArpEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.5.1 | NA | ||
| CipNewCfgStaticArpIndx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.5.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the static ARP table. | ||||
| CipNewCfgStaticArpIp | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.5.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The IP address for the ARP entry. | ||||
| CipNewCfgStaticArpMAC | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.5.1.3 | DisplayString | RC | |
column · DisplayString · read-create · current The MAC address for the ARP entry. | ||||
| CipNewCfgStaticArpVlan | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.5.1.4 | INTEGER (1..4095) | RC | |
column · INTEGER (1..4095) · read-create · current The VLAN for the ARP entry. | ||||
| CipNewCfgStaticArpPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.5.1.5 | Integer32 | RC | |
column · Integer32 · read-create · current The port for the ARP entry. | ||||
| CipNewCfgStaticArpAction | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.5.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
| ||||
| NipBootpCfg | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.8 | |||
| SipCurCfgBootpAddr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.8.1 | IpAddress | RO | |
scalar · IpAddress · read-only · current The IP address of BOOTP server. | ||||
| SipNewCfgBootpAddr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.8.2 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP address of BOOTP server. | ||||
| SipCurCfgBootpAddr2 | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.8.3 | IpAddress | RO | |
scalar · IpAddress · read-only · current The IP address of second BOOTP server. | ||||
| SipNewCfgBootpAddr2 | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.8.4 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP address of second BOOTP server. | ||||
| SipCurCfgBootpState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.8.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current The state of BOOTP relay.
| ||||
| SipNewCfgBootpState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.8.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current The state of BOOTP relay.
| ||||
| NdnsCfg | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.9 | |||
| SdnsCurCfgPrimaryIpAddr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.9.1 | IpAddress | RO | |
scalar · IpAddress · read-only · current The DNS primary IP address in the current_configuration block. | ||||
| SdnsNewCfgPrimaryIpAddr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.9.2 | IpAddress | RW | |
scalar · IpAddress · read-write · current The DNS primary IP address in the new_configuration block. | ||||
| SdnsCurCfgSecondaryIpAddr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.9.3 | IpAddress | RO | |
scalar · IpAddress · read-only · current The DNS primary IP address in the current_configuration block. | ||||
| SdnsNewCfgSecondaryIpAddr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.9.4 | IpAddress | RW | |
scalar · IpAddress · read-write · current The DNS primary IP address in the new_configuration block. | ||||
| SdnsCurCfgDomainName | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.9.5 | DisplayString (SIZE (0..191)) | RO | |
scalar · DisplayString (SIZE (0..191)) · read-only · current The DNS doamin name in the current_configuration block. | ||||
| SdnsNewCfgDomainName | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.9.6 | DisplayString (SIZE (0..191)) | RW | |
scalar · DisplayString (SIZE (0..191)) · read-write · current The DNS doamin name in the new_configuration block. | ||||
| NipNwfCfg | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10 | |||
| SipNwfTableMax | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the IP network filter table. | ||||
| TipCurCfgNwfTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.2 | NA | ||
table · not-accessible · current The table of IP network filter configuration in the current_config. | ||||
| RipCurCfgNwfEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.2.1 | NA | ||
| CipCurCfgNwfIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The netowrk filter number for which the NWF is related. | ||||
| CipCurCfgNwfAddr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.2.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address of the network filter. | ||||
| CipCurCfgNwfMask | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.2.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The subnet mask of the network filter. | ||||
| CipCurCfgNwfState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.2.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable the network filter.
| ||||
| TipNewCfgNwfTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.3 | NA | ||
table · not-accessible · current The table of IP network filter configuration in the current_config. | ||||
| RipNewCfgNwfEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.3.1 | NA | ||
| CipNewCfgNwfIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The netowrk filter number for which the NWF is related. | ||||
| CipNewCfgNwfAddr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.3.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The IP address of the network filter. | ||||
| CipNewCfgNwfMask | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.3.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current The subnet mask of the network filter. | ||||
| CipNewCfgNwfState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.3.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable the network filter.
| ||||
| CipNewCfgNwfDelete | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.3.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
| ||||
| NipRmapCfg | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11 | |||
| SipRmapTableMax | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the IP route map table. | ||||
| TipCurCfgRmapTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.2 | NA | ||
table · not-accessible · current The table of IP route map configuration in the current_config. | ||||
| RipCurCfgRmapEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.2.1 | NA | ||
| CipCurCfgRmapIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The route map number for which the RMAP is related. | ||||
| CipCurCfgRmapMetric | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.2.1.3 | Unsigned32 (0..4294967295) | RO | |
column · Unsigned32 (0..4294967295) · read-only · current The metric of the route map. 4294967295 means none | ||||
| CipCurCfgRmapPrec | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.2.1.4 | INTEGER (1..255) | RO | |
column · INTEGER (1..255) · read-only · current The precedence of the route map. | ||||
| CipCurCfgRmapState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.2.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable the route map.
| ||||
| CipCurCfgRmapMetricType | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.2.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The OSPF metric-type of the matched route.
| ||||
| TipNewCfgRmapTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.3 | NA | ||
table · not-accessible · current The table of IP route map configuration in the current_config. | ||||
| RipNewCfgRmapEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.3.1 | NA | ||
| CipNewCfgRmapIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The route map number for which the RMAP is related. | ||||
| CipNewCfgRmapMetric | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.3.1.3 | Unsigned32 (0..16777215) | RC | |
column · Unsigned32 (0..16777215) · read-create · current The metric of the route map. 16777215 means none | ||||
| CipNewCfgRmapPrec | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.3.1.4 | INTEGER (1..255) | RC | |
column · INTEGER (1..255) · read-create · current The precedence of the route map. | ||||
| CipNewCfgRmapState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.3.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable the route map.
| ||||
| CipNewCfgRmapMetricType | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.3.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current The OSPF metric-type of the matched route.
| ||||
| CipNewCfgRmapDelete | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.3.1.9 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
| ||||
| SipAlistTableMax | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.4 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the IP route map table. | ||||
| TipCurCfgAlistTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.5 | NA | ||
table · not-accessible · current The table of IP route map access list configuration in the current_config. | ||||
| RipCurCfgAlistEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.5.1 | NA | ||
row · not-accessible · current Information about an IP route map. | ||||
| CipCurCfgAlistRmapIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.5.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The route map number for which the RMAP is related. | ||||
| CipCurCfgAlistIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.5.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The access list number for which the access list is related. | ||||
| CipCurCfgAlistNwf | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.5.1.3 | INTEGER (0..256) | RO | |
column · INTEGER (0..256) · read-only · current The network filter number of the route map access list. 0 means none | ||||
| CipCurCfgAlistMetric | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.5.1.4 | Unsigned32 (0..4294967295) | RO | |
column · Unsigned32 (0..4294967295) · read-only · current The metric of the route map access list. 4294967295 means none | ||||
| CipCurCfgAlistAction | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.5.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Action of the route map access list.
| ||||
| CipCurCfgAlistState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.5.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable the route map access list.
| ||||
| TipNewCfgAlistTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.6 | NA | ||
table · not-accessible · current The table of IP route map access list configuration in the current_config. | ||||
| RipNewCfgAlistEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.6.1 | NA | ||
row · not-accessible · current Information about an IP route map. | ||||
| CipNewCfgAlistRmapIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.6.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The route map number for which the RMAP is related. | ||||
| CipNewCfgAlistIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.6.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The access list number for which the access list is related. | ||||
| CipNewCfgAlistNwf | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.6.1.3 | INTEGER (1..256) | RC | |
column · INTEGER (1..256) · read-create · current The network filter number of the route map access list. 0 means none | ||||
| CipNewCfgAlistMetric | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.6.1.4 | Unsigned32 (1..16777215) | RC | |
column · Unsigned32 (1..16777215) · read-create · current The metric of the route map access list. 16777215 means none | ||||
| CipNewCfgAlistAction | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.6.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current Action of the route map access list.
| ||||
| CipNewCfgAlistState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.6.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable the route map access list.
| ||||
| CipNewCfgAlistDelete | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.6.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
| ||||
| NospfCfg | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13 | |||
| NospfGeneral | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1 | |||
| SospfCurCfgDefaultRouteMetric | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1.1 | INTEGER (0..16777215) | RO | |
scalar · INTEGER (0..16777215) · read-only · current Specify the metric to be assigned. | ||||
| SospfNewCfgDefaultRouteMetric | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1.2 | INTEGER (0..16777214) | RW | |
scalar · INTEGER (0..16777214) · read-write · current Specify the metric to be assigned. | ||||
| SospfCurCfgDefaultRouteMetricType | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current Specify the AS External metric type to be assigned.
| ||||
| SospfNewCfgDefaultRouteMetricType | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Specify the AS External metric type to be assigned.
| ||||
| SospfIntfTableMaxSize | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1.5 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the OSPF Interface table. | ||||
| SospfAreaTableMaxSize | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1.6 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the OSPF Area table. | ||||
| SospfRangeTableMaxSize | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1.7 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the OSPF Range table. | ||||
| SospfVirtIntfTableMaxSize | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1.8 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the OSPF Virtual Interface table. | ||||
| SospfHostTableMaxSize | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1.9 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the OSPF Host table. | ||||
| SospfCurCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1.10 | INTEGER | RO | |
scalar · INTEGER · read-only · current OSPF global state.
| ||||
| SospfNewCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1.11 | INTEGER | RW | |
scalar · INTEGER · read-write · current Globally turn OSPF on or off.
| ||||
| SospfCurCfgLSDB | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1.12 | Integer32 | RO | |
scalar · Integer32 · read-only · current The LSDB limit for external LSA. | ||||
| SospfNewCfgLSDB | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1.13 | Integer32 | RW | |
scalar · Integer32 · read-write · current Set the LSDB limit for external LSA. | ||||
| TospfCurCfgAreaTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.2 | NA | ||
table · not-accessible · current The table of OSPF Area configuration in the current_config. | ||||
| RospfCurCfgAreaEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.2.1 | NA | ||
| CospfCurCfgAreaIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF area number for which the OSPF area table is related. | ||||
| CospfCurCfgAreaId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.2.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address of the OSPF area. | ||||
| CospfCurCfgAreaSpfInterval | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.2.1.3 | INTEGER (1..255) | RO | |
column · INTEGER (1..255) · read-only · current The SPF interval for the OSPF area. | ||||
| CospfCurCfgAreaAuthType | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.2.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Type of authentication being used. none(1) - no authentication password(2) - use password md5(3) - use MD5 authentication.
| ||||
| CospfCurCfgAreaType | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.2.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Type of Area. transit(0) stub(1) nssa(2)
| ||||
| CospfCurCfgAreaMetric | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.2.1.6 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Metric (1-65535) | ||||
| CospfCurCfgAreaStatus | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.2.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Status disabled(0) enabled(1)
| ||||
| TospfNewCfgAreaTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.3 | NA | ||
table · not-accessible · current The table of OSPF Area configuration in the new_config. | ||||
| RospfNewCfgAreaEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.3.1 | NA | ||
| CospfNewCfgAreaIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF area number for which the OSPF area table is related. | ||||
| CospfNewCfgAreaId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.3.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The IP Address of the OSPF area. | ||||
| CospfNewCfgAreaSpfInterval | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.3.1.3 | INTEGER (1..255) | RW | |
column · INTEGER (1..255) · read-write · current The SPF interval for the OSPF area. | ||||
| CospfNewCfgAreaAuthType | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.3.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Type of authentication being used.
none(1) - no authentication
password(2) - use password.
md5(3) - use MD5 authentication.
| ||||
| CospfNewCfgAreaType | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.3.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Type of Area.
transit(0)
stub(1)
nssa(2)
| ||||
| CospfNewCfgAreaMetric | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.3.1.6 | INTEGER (1..65535) | RW | |
column · INTEGER (1..65535) · read-write · current Metric (1-65535) | ||||
| CospfNewCfgAreaStatus | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.3.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current Status disabled(0) enabled(1)
| ||||
| CospfNewCfgAreaDelete | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.3.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current Delete the area
no(0),
yes(1)
| ||||
| NospfRouteRedistribution | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4 | |||
| NospfRedistributeStatic | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.1 | |||
| SospfCurCfgStaticMetric | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.1.1 | INTEGER (0..16777214) | RO | |
scalar · INTEGER (0..16777214) · read-only · current The metric to be assigned to static routes. A value of 0 indicates none. | ||||
| SospfNewCfgStaticMetric | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.1.2 | INTEGER (0..16777214) | RW | |
scalar · INTEGER (0..16777214) · read-write · current The metric to be assigned to static routes. A value of 0 indicates none. | ||||
| SospfCurCfgStaticMetricType | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.1.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current The AS External metric type for static routes.
| ||||
| SospfNewCfgStaticMetricType | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.1.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current The AS External metric type for static routes.
| ||||
| SospfCurCfgStaticOutRmapList | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.1.5 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| SospfNewCfgStaticOutRmapList | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.1.6 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| SospfNewCfgStaticAddOutRmap | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.1.7 | Integer32 | RW | |
scalar · Integer32 · read-write · current The route map to be add into out-rmap list. When read, 0 is returned. | ||||
| SospfNewCfgStaticRemoveOutRmap | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.1.8 | Integer32 | RW | |
scalar · Integer32 · read-write · current The route map to be removed from out-rmap list. When read, 0 is returned. | ||||
| NospfRedistributeFixed | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.4 | |||
| SospfCurCfgFixedMetric | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.4.1 | INTEGER (0..16777214) | RO | |
scalar · INTEGER (0..16777214) · read-only · current The export metric for fixed routes. A value of 0 indicates none | ||||
| SospfNewCfgFixedMetric | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.4.2 | INTEGER (0..16777214) | RW | |
scalar · INTEGER (0..16777214) · read-write · current The export metric for fixed routes. A value of 0 indicates none | ||||
| SospfCurCfgFixedMetricType | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.4.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current The AS External metric type for fixed routes.
| ||||
| SospfNewCfgFixedMetricType | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.4.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current The AS External metric type for fixed routes.
| ||||
| SospfCurCfgFixedOutRmapList | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.4.5 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| SospfNewCfgFixedOutRmapList | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.4.6 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| SospfNewCfgFixedAddOutRmap | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.4.7 | Integer32 | RW | |
scalar · Integer32 · read-write · current The route map to be add into out-rmap list. When read, 0 is returned. | ||||
| SospfNewCfgFixedRemoveOutRmap | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.4.8 | Integer32 | RW | |
scalar · Integer32 · read-write · current The route map to be removed from out-rmap list. When read, 0 is returned. | ||||
| NospfRedistributeRip | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.5 | |||
| SospfCurCfgRipMetric | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.5.1 | INTEGER (0..16777214) | RO | |
scalar · INTEGER (0..16777214) · read-only · current The export metric for RIP routes. A value of 0 indicates none | ||||
| SospfNewCfgRipMetric | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.5.2 | INTEGER (0..16777214) | RW | |
scalar · INTEGER (0..16777214) · read-write · current The export metric for RIP routes. A value of 0 indicates none | ||||
| SospfCurCfgRipMetricType | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.5.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current The AS External metric type for RIP routes.
| ||||
| SospfNewCfgRipMetricType | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.5.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current The AS External metric type for RIP routes.
| ||||
| SospfCurCfgRipOutRmapList | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.5.5 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| SospfNewCfgRipOutRmapList | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.5.6 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| SospfNewCfgRipAddOutRmap | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.5.7 | Integer32 | RW | |
scalar · Integer32 · read-write · current The route map to be add into out-rmap list. When read, 0 is returned. | ||||
| SospfNewCfgRipRemoveOutRmap | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.5.8 | Integer32 | RW | |
scalar · Integer32 · read-write · current The route map to be removed from out-rmap list. When read, 0 is returned. | ||||
| TospfCurCfgMdkeyTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.5 | NA | ||
table · not-accessible · current The table of OSPF MD5 keys in the current_config. | ||||
| RospfCurCfgMdkeyEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.5.1 | NA | ||
| CospfCurCfgMdkeyIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.5.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF MD5 Key number for which the OSPF MdKey table is related. | ||||
| CospfCurCfgMdkeyKey | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.5.1.2 | DisplayString (SIZE (0..16)) | RO | |
column · DisplayString (SIZE (0..16)) · read-only · current The character string representing the MD5 Key. | ||||
| TospfNewCfgMdkeyTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.6 | NA | ||
table · not-accessible · current The table of OSPF MD5 keys in the new_config. | ||||
| RospfNewCfgMdkeyEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.6.1 | NA | ||
| CospfNewCfgMdkeyIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.6.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF MD5 Key number for which the OSPF MdKey table is related. | ||||
| CospfNewCfgMdkeyKey | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.6.1.2 | DisplayString (SIZE (0..16)) | RC | |
column · DisplayString (SIZE (0..16)) · read-create · current The character string representing the MD5 Key. | ||||
| CospfNewCfgMdkeyDelete | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.6.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
| ||||
| TospfCurCfgIntfTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7 | NA | ||
table · not-accessible · current The table of OSPF Interface configuration in the current_config. | ||||
| RospfCurCfgIntfEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1 | NA | ||
| CospfCurCfgIntfIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF Interface number for which the OSPF Interface table is related. | ||||
| CospfCurCfgIntfId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address of the OSPF interface. | ||||
| CospfCurCfgIntfArea | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.3 | INTEGER (0..2) | RO | |
column · INTEGER (0..2) · read-only · current The index of the area that the interface belongs | ||||
| CospfCurCfgIntfMdkey | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.4 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current The MD5 key for the OSPF interface 0 (none) no MD5 authentication. | ||||
| CospfCurCfgIntfCost | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.5 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Interface cost | ||||
| CospfCurCfgIntfPrio | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.6 | INTEGER (1..255) | RO | |
column · INTEGER (1..255) · read-only · current Interface router priority | ||||
| CospfCurCfgIntfHello | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.7 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Hello interval | ||||
| CospfCurCfgIntfDead | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.8 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Dead interval | ||||
| CospfCurCfgIntfTrans | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.9 | INTEGER (1..3600) | RO | |
column · INTEGER (1..3600) · read-only · current Transit delay | ||||
| CospfCurCfgIntfRetra | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.10 | INTEGER (1..3600) | RO | |
column · INTEGER (1..3600) · read-only · current Retransmit interval | ||||
| CospfCurCfgIntfAuthKey | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.11 | DisplayString (SIZE (0..8)) | RO | |
column · DisplayString (SIZE (0..8)) · read-only · current Authentication Key | ||||
| CospfCurCfgIntfStatus | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current Status of the interface
disabled(0),
enabled(1)
| ||||
| TospfNewCfgIntfTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8 | NA | ||
table · not-accessible · current The table of OSPF Interface configuration in the new_config. | ||||
| RospfNewCfgIntfEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1 | NA | ||
| CospfNewCfgIntfIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF Interface number for which the OSPF Interface table is related. | ||||
| CospfNewCfgIntfId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address of the OSPF interface. | ||||
| CospfNewCfgIntfArea | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.3 | INTEGER (0..2) | RC | |
column · INTEGER (0..2) · read-create · current The index of the area that the interface belongs (0..2) | ||||
| CospfNewCfgIntfMdkey | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.4 | INTEGER (0..255) | RC | |
column · INTEGER (0..255) · read-create · current The MD5 key for the OSPF interface 0 (none) no MD5 authentication. | ||||
| CospfNewCfgIntfCost | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.5 | INTEGER (1..65535) | RC | |
column · INTEGER (1..65535) · read-create · current Interface cost(1..65535) | ||||
| CospfNewCfgIntfPrio | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.6 | INTEGER (0..255) | RC | |
column · INTEGER (0..255) · read-create · current Interface router priority(0..255) | ||||
| CospfNewCfgIntfHello | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.7 | INTEGER (1..65535) | RC | |
column · INTEGER (1..65535) · read-create · current Hello interval(1..65535) | ||||
| CospfNewCfgIntfDead | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.8 | INTEGER (1..65535) | RC | |
column · INTEGER (1..65535) · read-create · current Dead interval(1..65535) | ||||
| CospfNewCfgIntfTrans | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.9 | INTEGER (1..3600) | RC | |
column · INTEGER (1..3600) · read-create · current Transit delay(1..3600) | ||||
| CospfNewCfgIntfRetra | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.10 | INTEGER (1..3600) | RC | |
column · INTEGER (1..3600) · read-create · current Retransmit interval(1..3600) | ||||
| CospfNewCfgIntfAuthKey | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.11 | DisplayString (SIZE (0..8)) | RC | |
column · DisplayString (SIZE (0..8)) · read-create · current Authentication Key | ||||
| CospfNewCfgIntfStatus | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.12 | INTEGER | RC | |
column · INTEGER · read-create · current Status of the interface
disabled(0),
enabled(1)
| ||||
| CospfNewCfgIntfDelete | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current Delete the interface other(0), delete(1)
| ||||
| TospfCurCfgVirtIntfTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9 | NA | ||
table · not-accessible · current The table of OSPF Virtual Interface configuration in the current_config. | ||||
| RospfCurCfgVirtIntfEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1 | NA | ||
row · not-accessible · current Information about an OSPF virtual Interface. | ||||
| CospfCurCfgVirtIntfIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF Virtual Interface number for which the OSPF Virtual Interface table is related. | ||||
| CospfCurCfgVirtIntfAreaId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1.2 | INTEGER (0..2) | RO | |
column · INTEGER (0..2) · read-only · current The index of the OSPF area to which this virtual interface belongs. | ||||
| CospfCurCfgVirtIntfNbr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address of the OSPF neighbor for this virtual interface. | ||||
| CospfCurCfgVirtIntfMdkey | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1.4 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current The MD5 key for the OSPF virtual interface 0 (none) no MD5 authentication. | ||||
| CospfCurCfgVirtIntfHello | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1.5 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Hello interval | ||||
| CospfCurCfgVirtIntfDead | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1.6 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Dead interval | ||||
| CospfCurCfgVirtIntfTrans | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1.7 | INTEGER (1..3600) | RO | |
column · INTEGER (1..3600) · read-only · current Transit delay | ||||
| CospfCurCfgVirtIntfRetra | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1.8 | INTEGER (1..3600) | RO | |
column · INTEGER (1..3600) · read-only · current Retransmit interval | ||||
| CospfCurCfgVirtIntfAuthKey | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1.9 | DisplayString (SIZE (0..8)) | RO | |
column · DisplayString (SIZE (0..8)) · read-only · current Authentication Key | ||||
| CospfCurCfgVirtIntfStatus | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current Status
disabled(0),
enabled(1)
| ||||
| TospfNewCfgVirtIntfTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10 | NA | ||
table · not-accessible · current The table of OSPF Virtual Interface configuration in the new_config. | ||||
| RospfNewCfgVirtIntfEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1 | NA | ||
row · not-accessible · current Information about an OSPF virtual Interface. | ||||
| CospfNewCfgVirtIntfIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF Virtual Interface number for which the OSPF Virtual Interface table is related. | ||||
| CospfNewCfgVirtIntfAreaId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.2 | INTEGER (0..2) | RC | |
column · INTEGER (0..2) · read-create · current The index of the OSPF area to which this virtual interface belongs. | ||||
| CospfNewCfgVirtIntfNbr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current The IP Address of the OSPF neighbor for this virtual interface. | ||||
| CospfNewCfgVirtIntfMdkey | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.4 | INTEGER (0..255) | RC | |
column · INTEGER (0..255) · read-create · current The MD5 key for the OSPF virtual interface 0 (none) no MD5 authentication. | ||||
| CospfNewCfgVirtIntfHello | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.5 | INTEGER (1..65535) | RC | |
column · INTEGER (1..65535) · read-create · current Hello interval(1..65535) | ||||
| CospfNewCfgVirtIntfDead | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.6 | INTEGER (1..65535) | RC | |
column · INTEGER (1..65535) · read-create · current Dead interval(1..65535) | ||||
| CospfNewCfgVirtIntfTrans | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.7 | INTEGER (1..3600) | RC | |
column · INTEGER (1..3600) · read-create · current Transit dela(1..3600)y | ||||
| CospfNewCfgVirtIntfRetra | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.8 | INTEGER (1..3600) | RC | |
column · INTEGER (1..3600) · read-create · current Retransmit interval(1..3600) | ||||
| CospfNewCfgVirtIntfAuthKey | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.9 | DisplayString (SIZE (0..8)) | RC | |
column · DisplayString (SIZE (0..8)) · read-create · current Authentication Key SIZE(0..8) | ||||
| CospfNewCfgVirtIntfStatus | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.10 | INTEGER | RC | |
column · INTEGER · read-create · current Status disabled(0), enabled(1)
| ||||
| CospfNewCfgVirtIntfDelete | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current Delete
other(0),
delete(1)
| ||||
| SospfMdkeyTableMaxSize | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.11 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the OSPF Mdkey table. | ||||
| TospfCurCfgHostTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.12 | NA | ||
table · not-accessible · current The table of OSPF Host configuration. | ||||
| RospfCurCfgHostEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.12.1 | NA | ||
| CospfCurCfgHostIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.12.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF host number for which the OSPF host table is related. | ||||
| CospfCurCfgHostIpAddr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.12.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address of the OSPF host. | ||||
| CospfCurCfgHostAreaIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.12.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The area index. | ||||
| CospfCurCfgHostCost | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.12.1.4 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current The cost of the OSPF host. | ||||
| CospfCurCfgHostState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.12.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable an OSPF Host
| ||||
| TospfNewCfgHostTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.13 | NA | ||
table · not-accessible · current The table of OSPF Host configuration. | ||||
| RospfNewCfgHostEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.13.1 | NA | ||
| CospfNewCfgHostIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.13.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF host number for which the OSPF host table is related. | ||||
| CospfNewCfgHostIpAddr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.13.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The IP Address of the OSPF host. | ||||
| CospfNewCfgHostAreaIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.13.1.3 | Integer32 | RC | |
column · Integer32 · read-create · current The OSPF area index. | ||||
| CospfNewCfgHostCost | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.13.1.4 | INTEGER (1..65535) | RC | |
column · INTEGER (1..65535) · read-create · current The cost of the OSPF host. | ||||
| CospfNewCfgHostState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.13.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable an OSPF Host
| ||||
| CospfNewCfgHostDelete | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.13.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current Delete the OSPF host: no(0), yes(1)
| ||||
| TospfCurCfgRangeTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.14 | NA | ||
table · not-accessible · current The table of OSPF summary range in the current configuration. | ||||
| RospfCurCfgRangeEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.14.1 | NA | ||
| CospfCurCfgRangeIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.14.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The range number for which the OSPF summary range table is related. | ||||
| CospfCurCfgRangeAddr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.14.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address of the range. | ||||
| CospfCurCfgRangeMask | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.14.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The mask of the range. | ||||
| CospfCurCfgRangeAreaIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.14.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The area index. | ||||
| CospfCurCfgRangeHideState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.14.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The state of the hide range.
| ||||
| CospfCurCfgRangeState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.14.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The state of the range.
| ||||
| TospfNewCfgRangeTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.15 | NA | ||
table · not-accessible · current The table of OSPF summary range in the new configuration. | ||||
| RospfNewCfgRangeEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.15.1 | NA | ||
| CospfNewCfgRangeIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.15.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The range number for which the OSPF summary range table is related. | ||||
| CospfNewCfgRangeAddr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.15.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The IP Address of the range. | ||||
| CospfNewCfgRangeMask | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.15.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current The mask of the range. | ||||
| CospfNewCfgRangeAreaIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.15.1.4 | Integer32 | RC | |
column · Integer32 · read-create · current The area index. | ||||
| CospfNewCfgRangeHideState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.15.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current The state of the hide range.
| ||||
| CospfNewCfgRangeState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.15.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current The state of the range.
| ||||
| CospfNewCfgRangeDelete | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.15.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
| ||||
| NipGeneralCfg | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.14 | |||
| SipCurCfgRouterID | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.14.1 | IpAddress | RO | |
scalar · IpAddress · read-only · current The router ID of the switch. | ||||
| SipNewCfgRouterID | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.14.2 | IpAddress | RW | |
scalar · IpAddress · read-write · current The router ID of the switch. | ||||
| NigmpCfg | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15 | |||
| SigmpCurCfgOnOff | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Globally turn IGMP On/Off.
| ||||
| SigmpNewCfgOnOff | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Globally turn IGMP On/Off.
| ||||
| NigmpSnoopCfgGen | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3 | |||
| NigmpSnoopCfg | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1 | |||
| SigmpSnoopCurCfgTimeout | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current Set IGMP Report timeout. | ||||
| SigmpSnoopNewCfgTimeout | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current Set IGMP Report timeout. | ||||
| SigmpSnoopCurCfgMrto | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current The value of multicast router timeout in the current config. | ||||
| SigmpSnoopNewCfgMrto | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.4 | Integer32 | RW | |
scalar · Integer32 · read-write · current The value of multicast router timeout in the new config. | ||||
| SigmpSnoopNewCfgVlanFastlvAdd | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.12 | Integer32 | RW | |
scalar · Integer32 · read-write · current The VLAN to be added to fastleave vlan list. When read, 0 is returned. | ||||
| SigmpSnoopNewCfgVlanFastlvRem | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.13 | Integer32 | RW | |
scalar · Integer32 · read-write · current The VLAN to be removed from fastleave vlan list. When read, 0 is returned. | ||||
| SigmpSnoopCurCfgVlanFastlvBmap | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.14 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The fastlv enabled vlans present in the in vlan map list. The fastlv enabled vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Vlan 9 || || || ||___ Vlan 8 || |____ Vlan 7 || . . . ||_________ Vlan 2 |__________ Vlan 1 where x : 1 - The represented vlan has fastlv enabled 0 - The represented vlan does not have fastlv enabled. | ||||
| SigmpSnoopNewCfgVlanFastlvBmap | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.15 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The fastlv enabled vlans present in the in vlan map list. The fastlv enabled vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Vlan 9 || || || ||___ Vlan 8 || |____ Vlan 7 || . . . ||_________ Vlan 2 |__________ Vlan 1 where x : 1 - The represented vlan has fastlv enabled 0 - The represented vlan does not have fastlv enabled. | ||||
| SigmpSnoopCurCfgRobust | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.16 | Integer32 | RO | |
scalar · Integer32 · read-only · current The value of expected packet loss on subnet in the current config. | ||||
| SigmpSnoopNewCfgRobust | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.17 | Integer32 | RW | |
scalar · Integer32 · read-write · current The value of expected packet loss on subnet in the new config. | ||||
| SigmpSnoopNewCfgVlanAdd | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.18 | Integer32 | RW | |
scalar · Integer32 · read-write · current The VLAN to be added to snooping vlan list. When read, 0 is returned. | ||||
| SigmpSnoopNewCfgVlanRem | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.19 | Integer32 | RW | |
scalar · Integer32 · read-write · current The VLAN to be removed from snooping vlan list. When read, 0 is returned. | ||||
| SigmpSnoopNewCfgVlanClear | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.20 | INTEGER | RW | |
scalar · INTEGER · read-write · current Removing ALL Snooping Vlans.
| ||||
| SigmpSnoopCurCfgVlanBmap | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.21 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The snooping vlans present in the in vlan map list. The snooping vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Vlan 9 || || || ||___ Vlan 8 || |____ Vlan 7 || . . . ||_________ Vlan 2 |__________ Vlan 1 where x : 1 - The represented vlan has snoop enabled 0 - The represented vlan does not have snooping enabled. | ||||
| SigmpSnoopNewCfgVlanBmap | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.22 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The snooping vlans present in the in vlan map list. The snooping vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Vlan 9 || || || ||___ Vlan 8 || |____ Vlan 7 || . . . ||_________ Vlan 2 |__________ Vlan 1 where x : 1 - The represented vlan has snoop enabled 0 - The represented vlan does not have snooping enabled. | ||||
| SigmpSnoopCurCfgQInterval | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.23 | Integer32 | RO | |
scalar · Integer32 · read-only · current IGMP Query Interval of current config. | ||||
| SigmpSnoopNewCfgQInterval | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.24 | Integer32 | RW | |
scalar · Integer32 · read-write · current IGMP Query Interval of new config. | ||||
| SigmpSnoopCurCfgSrcIp | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.25 | IpAddress | RO | |
scalar · IpAddress · read-only · current The source ip for GSQ proxy in current config. | ||||
| SigmpSnoopNewCfgSrcIp | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.26 | IpAddress | RW | |
scalar · IpAddress · read-write · current The source ip for GSQ proxy in new config. | ||||
| SigmpSnoopCurCfgAggrEnaDis | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.27 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable/Disable of IGMP Report aggregation.
| ||||
| SigmpSnoopNewCfgAggrEnaDis | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.28 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/Disable of IGMP Report aggregation.
| ||||
| SigmpSnoopCurCfgFlood | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.29 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable/Disable of flood unregistered IPMC
| ||||
| SigmpSnoopNewCfgFlood | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.30 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/Disable of flood unregistered IPMC
| ||||
| NigmpStaticMrtrCfg | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4 | |||
| TigmpStaticMrtrCurCfgTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.1 | NA | ||
table · not-accessible · current The IGMP Static Multicast Router table in the current configuration block. | ||||
| RigmpStaticMrtrCurCfgTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.1.1 | NA | ||
row · not-accessible · current A row in the Static Multicast Router table. | ||||
| CigmpStaticMrtrCurCfgIndx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The IGMP Multicast Router table port index. | ||||
| CigmpStaticMrtrCurCfgPortId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.1.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The IGMP Multicast Router port in the current configuration block. | ||||
| CigmpStaticMrtrCurCfgVlanId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.1.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The IGMP Multicast Router port in the current configuration block. | ||||
| CigmpStaticMrtrCurCfgVersion | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The IGMP version of the IGMP Static Multicast Router.
| ||||
| TigmpStaticMrtrNewCfgTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.2 | NA | ||
table · not-accessible · current The IGMP Static Multicast Router table in the new configuration block. | ||||
| RigmpStaticMrtrNewCfgTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.2.1 | NA | ||
row · not-accessible · current A row in the Static Multicast Router table. | ||||
| CigmpStaticMrtrNewCfgIndx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The IGMP Multicast Router table port index. | ||||
| CigmpStaticMrtrNewCfgPortId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.2.1.2 | Integer32 | RC | |
column · Integer32 · read-create · current The IGMP Multicast Router port in the new configuration block. | ||||
| CigmpStaticMrtrNewCfgVlanId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.2.1.3 | Integer32 | RC | |
column · Integer32 · read-create · current The IGMP Multicast Router port in the new configuration block. | ||||
| CigmpStaticMrtrNewCfgVersion | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.2.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current The IGMP version of the IGMP Static Multicast Router.
| ||||
| CigmpStaticMrtrNewCfgDelete | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.2.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
| ||||
| NigmpFilterCfg | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5 | |||
| TigmpFltCurCfgTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.1 | NA | ||
table · not-accessible · current The IGMP filtering table in the current configuration block. | ||||
| RigmpFltCurCfgTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.1.1 | NA | ||
| CigmpFltCurCfgIndx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The IGMP filter table index. | ||||
| CigmpFltCurCfgMcastIp1 | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.1.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current Range1 Multicast IP address to be filtered. | ||||
| CigmpFltCurCfgMcastIp2 | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.1.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current Range2 Multicast IP address to be filtered. | ||||
| CigmpFltCurCfgAction | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The action for the IGMP filtering rule.
| ||||
| CigmpFltCurCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The state of this IGMP filtering rule.
| ||||
| TigmpFltNewCfgTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.2 | NA | ||
table · not-accessible · current The IGMP filtering table in the current configuration block. | ||||
| RigmpFltNewCfgTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.2.1 | NA | ||
| CigmpFltNewCfgIndx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The IGMP filter table index. | ||||
| CigmpFltNewCfgMcastIp1 | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.2.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current Range1 Multicast source IP address to be filtered. | ||||
| CigmpFltNewCfgMcastIp2 | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.2.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current Range2 Multicast source IP address to be filtered. | ||||
| CigmpFltNewCfgAction | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.2.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current The action for the IGMP filtering rule.
| ||||
| CigmpFltNewCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.2.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current The state of this IGMP filtering rule.
| ||||
| CigmpFltNewCfgDelete | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.2.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
| ||||
| TigmpFltCurCfgPortTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.3 | NA | ||
table · not-accessible · current The IGMP filtering port table in the current configuration block. | ||||
| RigmpFltCurCfgPortTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.3.1 | NA | ||
| CigmpFltCurCfgPortIndx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The port index. | ||||
| CigmpFltCurCfgPortState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.3.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable IGMP filtering.
| ||||
| CigmpFltCurCfgPortFiltBmap | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.3.1.3 | OCTET STRING (SIZE (0..256)) | RO | |
column · OCTET STRING (SIZE (0..256)) · read-only · current The IGMP filtering rules applied to the port. The filtering rules are
presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ filter 9
|| ||
|| ||___ filter 8
|| |____ filter 7
|| . . .
||_________ filter 2
|__________ filter 1 (as index to igmpFltCurCfgTable)
where x : 1 - The represented IGMP filter rule applied to the port
0 - The represented IGMP filter rule not applied to the port | ||||
| TigmpFltNewCfgPortTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.4 | NA | ||
table · not-accessible · current The IGMP filtering port table in the new configuration block. | ||||
| RigmpFltNewCfgPortTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.4.1 | NA | ||
| CigmpFltNewCfgPortIndx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The port index. | ||||
| CigmpFltNewCfgPortState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.4.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable IGMP filtering.
| ||||
| CigmpFltNewCfgPortFiltBmap | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.4.1.3 | OCTET STRING (SIZE (0..256)) | RO | |
column · OCTET STRING (SIZE (0..256)) · read-only · current The IGMP filtering rules applied to the port. The filtering rules
are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ filter 9
|| ||
|| ||___ filter 8
|| |____ filter 7
|| . . .
||_________ filter 2
|__________ filter 1 (as index to fltNewCfgTable)
where x : 1 - The represented filter rule applied to the port
0 - The represented filter rule not applied to the port | ||||
| CigmpFltNewCfgPortAddFiltRule | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.4.1.4 | Integer32 | RC | |
column · Integer32 · read-create · current This is an action object to add filtering rule to a port. The value specified with this object is the index to the fltNewCfgTable for which filtering rule to be added to the port. The range of the valid index is between 1 and igmpFltCurCfgTableMaxSize. When read, the value '0' is returned always. | ||||
| CigmpFltNewCfgPortRemFiltRule | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.4.1.5 | Integer32 | RC | |
column · Integer32 · read-create · current This is an action object to remove filtering rule from a port. The value specified with this object is the index to the fltNewCfgTable for which filtering rule to be removed from the port. The range of the valid index is between 1 and igmpFltCurCfgTableMaxSize. When read, the value '0' is returned always. | ||||
| SigmpFltCurCfgEnaDis | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable/Disable of IGMP Filtering.
| ||||
| SigmpFltNewCfgEnaDis | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/Disable of IGMP Filtering.
| ||||
| Nrip2Cfg | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18 | |||
| TripCurCfgIntfTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1 | NA | ||
table · not-accessible · current The table of RIP on IP interface configuration in the current_config. | ||||
| RripCurCfgIntfEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1 | NA | ||
| CripCurCfgIntfIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The interface number for which the RIP information is related. | ||||
| CripCurCfgIntfVersion | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current RIP version.
| ||||
| CripCurCfgIntfSupply | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable supplying route updates.
| ||||
| CripCurCfgIntfListen | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable listening to route updates.
| ||||
| CripCurCfgIntfDefault | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Specifies what RIP does with default routes.
| ||||
| CripCurCfgIntfTrigUpdate | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable tirggered updates.
| ||||
| CripCurCfgIntfMcastUpdate | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable multicast updates.
| ||||
| CripCurCfgIntfPoisonReverse | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current RIP poison reverse.
| ||||
| CripCurCfgIntfState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable RIP protocol.
| ||||
| CripCurCfgIntfMetric | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.10 | INTEGER (1..16) | RO | |
column · INTEGER (1..16) · read-only · current RIP route metric for this interface. | ||||
| CripCurCfgIntfAuth | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable RIP update authorization with a simple plain text password.
| ||||
| CripCurCfgIntfKey | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.12 | DisplayString (SIZE (0..16)) | RO | |
column · DisplayString (SIZE (0..16)) · read-only · current RIP update authentication password. | ||||
| CripCurCfgIntfSplitHorizon | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current RIP split horizon.
| ||||
| TripNewCfgIntfTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2 | NA | ||
table · not-accessible · current The table of RIP on IP interface configuration in the new_config. | ||||
| RripNewCfgIntfEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1 | NA | ||
| CripNewCfgIntfIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The interface number for which the RIP information is related. | ||||
| CripNewCfgIntfVersion | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current RIP version.
| ||||
| CripNewCfgIntfSupply | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Enable or disable supplying route updates.
| ||||
| CripNewCfgIntfListen | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Enable or disable listening to route updates.
| ||||
| CripNewCfgIntfDefault | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current Specifies what RIP does with default routes. The default routes action could be set to listen/supply/both/none.
| ||||
| CripNewCfgIntfTrigUpdate | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current Enable or disable tirggered updates.
| ||||
| CripNewCfgIntfMcastUpdate | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current Enable or disable multicast updates.
| ||||
| CripNewCfgIntfPoisonReverse | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current RIP poison reverse.
| ||||
| CripNewCfgIntfState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.9 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable RIP protocol.
| ||||
| CripNewCfgIntfMetric | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.10 | INTEGER (1..15) | RW | |
column · INTEGER (1..15) · read-write · current RIP route metric for this interface. | ||||
| CripNewCfgIntfAuth | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current Enable or disable RIP update authorization with a simple plain text password.
| ||||
| CripNewCfgIntfKey | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.12 | DisplayString (SIZE (0..16)) | RC | |
column · DisplayString (SIZE (0..16)) · read-create · current RIP update authentication password. | ||||
| CripNewCfgIntfSplitHorizon | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current RIP split horizon.
| ||||
| NripGeneral | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.3 | |||
| Srip2CurCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.3.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current RIP global state.
| ||||
| Srip2NewCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.3.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Globally turn RIP on or off.
| ||||
| Srip2CurCfgUpdatePeriod | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.3.3 | INTEGER (1..120) | RO | |
scalar · INTEGER (1..120) · read-only · current Update Period in seconds. | ||||
| Srip2NewCfgUpdatePeriod | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.3.4 | INTEGER (1..120) | RW | |
scalar · INTEGER (1..120) · read-write · current Update Period in seconds. | ||||
| NripRouteRedistribution | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4 | |||
| NripRedistributeStatic | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.1 | |||
| SripCurCfgStaticMetric | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.1.1 | INTEGER (0..15) | RO | |
scalar · INTEGER (0..15) · read-only · current The metric to be assigned to static routes. A value of 0 indicates none. | ||||
| SripNewCfgStaticMetric | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.1.2 | INTEGER (0..15) | RW | |
scalar · INTEGER (0..15) · read-write · current The metric to be assigned to static routes. A value of 0 indicates none. | ||||
| SripCurCfgStaticOutRmapList | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.1.5 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| SripNewCfgStaticOutRmapList | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.1.6 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| SripNewCfgStaticAddOutRmap | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.1.7 | Integer32 | RW | |
scalar · Integer32 · read-write · current The route map to be add into out-rmap list. When read, 0 is returned. | ||||
| SripNewCfgStaticRemoveOutRmap | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.1.8 | Integer32 | RW | |
scalar · Integer32 · read-write · current The route map to be removed from out-rmap list. When read, 0 is returned. | ||||
| NripRedistributeFixed | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.4 | |||
| SripCurCfgFixedMetric | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.4.1 | INTEGER (0..15) | RO | |
scalar · INTEGER (0..15) · read-only · current The export metric for fixed routes. A value of 0 indicates none | ||||
| SripNewCfgFixedMetric | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.4.2 | INTEGER (0..15) | RW | |
scalar · INTEGER (0..15) · read-write · current The export metric for fixed routes. A value of 0 indicates none | ||||
| SripCurCfgFixedOutRmapList | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.4.5 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| SripNewCfgFixedOutRmapList | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.4.6 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| SripNewCfgFixedAddOutRmap | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.4.7 | Integer32 | RW | |
scalar · Integer32 · read-write · current The route map to be add into out-rmap list. When read, 0 is returned. | ||||
| SripNewCfgFixedRemoveOutRmap | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.4.8 | Integer32 | RW | |
scalar · Integer32 · read-write · current The route map to be removed from out-rmap list. When read, 0 is returned. | ||||
| NripRedistributeOspf | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.5 | |||
| SripCurCfgOspfMetric | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.5.1 | INTEGER (0..15) | RO | |
scalar · INTEGER (0..15) · read-only · current The export metric for RIP routes. A value of 0 indicates none | ||||
| SripNewCfgOspfMetric | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.5.2 | INTEGER (0..15) | RW | |
scalar · INTEGER (0..15) · read-write · current The export metric for RIP routes. A value of 0 indicates none | ||||
| SripCurCfgOspfOutRmapList | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.5.5 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| SripNewCfgOspfOutRmapList | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.5.6 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| SripNewCfgOspfAddOutRmap | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.5.7 | Integer32 | RW | |
scalar · Integer32 · read-write · current The route map to be add into out-rmap list. When read, 0 is returned. | ||||
| SripNewCfgOspfRemoveOutRmap | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.5.8 | Integer32 | RW | |
scalar · Integer32 · read-write · current The route map to be removed from out-rmap list. When read, 0 is returned. | ||||
| NripRedistributeEospf | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.6 | |||
| SripCurCfgEospfMetric | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.6.1 | INTEGER (0..15) | RO | |
scalar · INTEGER (0..15) · read-only · current The export metric for RIP routes. A value of 0 indicates none | ||||
| SripNewCfgEospfMetric | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.6.2 | INTEGER (0..15) | RW | |
scalar · INTEGER (0..15) · read-write · current The export metric for RIP routes. A value of 0 indicates none | ||||
| SripCurCfgEospfOutRmapList | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.6.5 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| SripNewCfgEospfOutRmapList | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.6.6 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| SripNewCfgEospfAddOutRmap | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.6.7 | Integer32 | RW | |
scalar · Integer32 · read-write · current The route map to be add into out-rmap list. When read, 0 is returned. | ||||
| SripNewCfgEospfRemoveOutRmap | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.6.8 | Integer32 | RW | |
scalar · Integer32 · read-write · current The route map to be removed from out-rmap list. When read, 0 is returned. | ||||
| Nlayer3Stats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2 | |||
| NarpStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.2 | |||
| SarpStatEntries | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.2.1 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The current number of ARP entries. | ||||
| SarpStatHighWater | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.2.2 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The highest number of ARP entries. | ||||
| SarpStatMaxEntries | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.2.3 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The maximum number of ARP entries. | ||||
| NrouteStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.3 | |||
| SrouteStatEntries | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.3.1 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The current number of IP routes. | ||||
| SrouteStatHighWater | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.3.2 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The highest number of IP routes. | ||||
| SrouteStatMaxEntries | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.3.3 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The maximum number of IP routes. | ||||
| NvrrpStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.4 | |||
| SvrrpStatInAdvers | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.4.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of good VRRP advertisements which are received. | ||||
| SvrrpStatOutAdvers | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.4.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of good VRRP advertisements which are transmitted. | ||||
| SvrrpStatOutBadAdvers | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.4.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of bad VRRP advertisements which are received. | ||||
| SvrrpStatBadVersion | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.4.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of bad VRRP version adv which are received. | ||||
| SvrrpStatBadAddress | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.4.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of bad VRRP addres adv which are received. | ||||
| SvrrpStatBadPassword | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.4.6 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of bad VRRP advertisements which are received. | ||||
| SvrrpStatBadVrid | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.4.7 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of bad VRRP version ID adv which are received. | ||||
| SvrrpStatBadData | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.4.8 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of bad VRRP advertisements which are received. | ||||
| SvrrpStatBadInterval | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.4.9 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of bad VRRP iutervals which are received. | ||||
| NospfStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5 | |||
| NospfGeneralStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1 | |||
| NospfCumRxTxStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.1 | |||
| SospfCumRxPkts | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.1.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total of all OSPF packets received on all OSPF areas and interfaces. | ||||
| SospfCumTxPkts | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.1.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total of all OSPF packets transmitted on all OSPF areas and interfaces. | ||||
| SospfCumRxHello | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.1.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total of all Hello packets received on all OSPF areas and interfaces. | ||||
| SospfCumTxHello | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.1.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total of all Hello packets transmitted on all OSPF areas and interfaces. | ||||
| SospfCumRxDatabase | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.1.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total of all Database Description packets received on all OSPF areas and interfaces. | ||||
| SospfCumTxDatabase | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.1.6 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total of all Database Description packets transmitted on all OSPF areas and interfaces. | ||||
| SospfCumRxlsReqs | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.1.7 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total of all Link State Request packets received on all OSPF areas and interfaces. | ||||
| SospfCumTxlsReqs | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.1.8 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total of all Link State Request packets transmitted on all OSPF areas and interfaces. | ||||
| SospfCumRxlsAcks | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.1.9 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total of all Link State Acknowledgement packets received on all OSPF areas and interfaces. | ||||
| SospfCumTxlsAcks | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.1.10 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total of all Link State Acknowledgement packets transmitted on all OSPF areas and interfaces. | ||||
| SospfCumRxlsUpdates | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.1.11 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total of all Link State Update packets received on all OSPF areas and interfaces. | ||||
| SospfCumTxlsUpdates | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.1.12 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total of all Link State Update packets transmitted on all OSPF areas and interfaces. | ||||
| NospfCumNbrChangeStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.2 | |||
| SospfCumNbrhello | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.2.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total of all Hello packets received from neighbours on all OSPF areas and interfaces. | ||||
| SospfCumNbrStart | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.2.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of neighbours in this state (i.e. an indication that Hello packets should now be sent to the neighbour at intervals of HelloInterval seconds.) across all OSPF areas and interfaces. | ||||
| SospfCumNbrAdjointOk | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.2.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of decisions to be made (again) as to whether an adjacency should be established/maintained with the neighbour across all OSPF areas and interfaces. | ||||
| SospfCumNbrNegotiationDone | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.2.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of neighbours in this state wherein the Master/slave relationship has been negotiated, and sequence numbers have been exchanged, across all OSPF areas and interfaces. | ||||
| SospfCumNbrExchangeDone | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.2.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of neighbours in this state (i.e. in an adjacency's final state) having transimitted a full sequence of Database Description packets, across all OSPF areas and interfaces. | ||||
| SospfCumNbrBadRequests | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.2.6 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of Link State Requests which have been received for a link state advertisement not contained in the database across all interfaces and OSPF areas. | ||||
| SospfCumNbrBadSequence | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.2.7 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of Database Description packets which have been received that either a) has an unexpected DD sequence number b) Unexpectedly has the init bit set c) Has an options field differing from the last Options field received in a Database Description packet. Any of these conditions indicate that some error has occured during adjacency establishment for all OSPF areas and interfaces. | ||||
| SospfCumNbrLoadingDone | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.2.8 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of link state updates received for all out-of-date portions of the database across all OSPF areas and interfaces. | ||||
| SospfCumNbrN1way | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.2.9 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of Hello packets received from neighbours, in which this router is not mentioned across all OSPF interfaces and areas. | ||||
| SospfCumNbrRstAd | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.2.10 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of times the Neighbour adjacency has been reset across all OPSF areas and interfaces. | ||||
| SospfCumNbrDown | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.2.11 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of Neighbouring routers down (i.e. in the initial state of a neighbour conversation.) across all OSPF areas and interfaces. | ||||
| SospfCumNbrN2way | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.2.12 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of Hello packets received from neighbours, in which this router is mentioned across all OSPF interfaces and areas. | ||||
| NospfCumIntfChangeStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.3 | |||
| SospfCumIntfHello | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.3.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of Hello packets sent on all interfaces and areas | ||||
| SospfCumIntfDown | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.3.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of interfaces down in all OSPF areas. | ||||
| SospfCumIntfLoop | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.3.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total of interfaces no longer connected to the attatched network across all OSPF areas and interfaces. | ||||
| SospfCumIntfUnloop | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.3.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of interfaces, connected to the attatched network in all OSPF areas. | ||||
| SospfCumIntfWaitTimer | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.3.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of times the Wait Timer has been fired, (indicating the end of the waiting period that is required before electing a (Backup) Designated Router) across all OSPF areas and interfaces. | ||||
| SospfCumIntfBackup | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.3.6 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of Backup Designated Routers on the attatched network for all OSPF areas and interfaces. | ||||
| SospfCumIntfNbrChange | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.3.7 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of changes in the set of bidirectional neighbours associated with any interface across all OSPF areas. | ||||
| NospfTimersKickOffStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.4 | |||
| SospfTmrsKckOffHello | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.4.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of times the Hello timer has been fired (which triggers the send of a Hello packet) across all OPSF areas and interfaces. | ||||
| SospfTmrsKckOffRetransmit | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.4.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of times the Retransmit timer has been fired across all OPSF areas and interfaces. | ||||
| SospfTmrsKckOffLsaLock | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.4.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of times the Lsa Lock timer has been fired across all OSPF areas and interfaces. | ||||
| SospfTmrsKckOffLsaAck | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.4.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum total number of times the Lsa Ack timer has been fired across all ospf areas and interfaces. | ||||
| SospfTmrsKckOffDbage | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.4.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of times the Dbage has been fired. | ||||
| SospfTmrsKckOffSummary | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.4.6 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of times the Summary timer has been fired. | ||||
| SospfTmrsKckOffAseExport | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.4.7 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of times the ASE Export timer has been fired. | ||||
| NospfArea | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2 | |||
| TospfAreaRxTxStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1 | NA | ||
table · not-accessible · current The table of OSPF Area Rx/Tx Statistics. | ||||
| RospfAreaRxTxStatsEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1 | NA | ||
| CospfAreaRxTxIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the ospf Area for which these statistics apply. | ||||
| CospfAreaRxPkts | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of OSPF packets received in this OSPF area. | ||||
| CospfAreaTxPkts | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of OSPF packets transmitted in this OSPF area. | ||||
| CospfAreaRxHello | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Hello packets received in this OSPF area. | ||||
| CospfAreaTxHello | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Hello packets transmitted in this OSPF area. | ||||
| CospfAreaRxDatabase | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Database Description packets transmitted for this OSPF area. | ||||
| CospfAreaTxDatabase | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Database Description packets transmitted for this OSPF area. | ||||
| CospfAreaRxlsReqs | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Request packets received for this OSPF area. | ||||
| CospfAreaTxlsReqs | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Request packets transmitted for this OSPF area. | ||||
| CospfAreaRxlsAcks | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Acknowledgement packets received for this OSPF area. | ||||
| CospfAreaTxlsAcks | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Acknowledgement packets transmitted for this OSPF area. | ||||
| CospfAreaRxlsUpdates | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Update packets received for this OSPF area. | ||||
| CospfAreaTxlsUpdates | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Update packets transmitted for this OSPF area. | ||||
| TospfAreaNbrChangeStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2 | NA | ||
table · not-accessible · current The table of OSPF Area Neighbour Statistics. | ||||
| RospfAreaNbrChangeStatsEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1 | NA | ||
row · not-accessible · current Area Neighbour Change Statistics about a OSPF area.
| ||||
| CospfAreaNbrIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the ospf Area for which these statistics apply. | ||||
| CospfAreaNbrhello | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Hello packets received from neighbours in this OSPF area. | ||||
| CospfAreaNbrStart | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of neighbours in this state (i.e. an indication that Hello packets should now be sent to the neighbour at intervals of HelloInterval seconds.) in this OSPF area. | ||||
| CospfAreaNbrAdjointOk | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of decisions to be made (again) as to whether an adjacency should be established/maintained with the neighbour. for this OSPF area. | ||||
| CospfAreaNbrNegotiationDone | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of neighbours in this state wherein the Master/slave relationship has been negotiated, and sequence numbers have been exchanged, for this OSPF area. | ||||
| CospfAreaNbrExchangeDone | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of neighbours in this state (i.e. in an adjacency's final state) having transimitted a full sequence of Database Description packets, for this OSPF area. | ||||
| CospfAreaNbrBadRequests | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The sum total number of Link State Requests which have been received for a link state advertisement not contained in the database across this OSPF area. | ||||
| CospfAreaNbrBadSequence | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Database Description packets which have been received that either a) has an unexpected DD sequence number b) Unexpectedly has the init bit set c) Has an options field differing from the last Options field received in a Database Description packet. Any of these conditions indicate that some error has occured during adjacency establishment for this OSPF area. | ||||
| CospfAreaNbrLoadingDone | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of link state updates received for all out-of-date portions of the database in this OSPF area. | ||||
| CospfAreaNbrN1way | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Hello packets received from neighbours, in which this router is not mentioned in this OSPF area. | ||||
| CospfAreaNbrRstAd | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of times the Neighbour adjacency has been reset across this OPSF area. | ||||
| CospfAreaNbrDown | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Neighbouring routers down (i.e. in the initial state of a neighbour conversation.) in this OSPF area. | ||||
| CospfAreaNbrN2way | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Hello packets received from neighbours, in which this router is mentioned in this OSPF area. | ||||
| TospfAreaChangeStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.3 | NA | ||
table · not-accessible · current The table of OSPF Area Change Statistics. | ||||
| RospfAreaChangeStatsEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.3.1 | NA | ||
| CospfAreaIntfIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the OSPF Area for which these statistics apply. | ||||
| CospfAreaIntfHello | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.3.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Hello packets sent on this OSPF area. | ||||
| CospfAreaIntfDown | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.3.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of interfaces down in this OSPF area. | ||||
| CospfAreaIntfLoop | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.3.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of interfaces no longer connected to the attatched network in this OSPF area. | ||||
| CospfAreaIntfUnloop | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.3.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of interfaces connected to the attatched network in this OSPF area.. | ||||
| CospfAreaIntfWaitTimer | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.3.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of times the Wait Timer has been fired, (indicating the end of the waiting period that is required before electing a (Backup) Designated Router) for this OSPF area. | ||||
| CospfAreaIntfBackup | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.3.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Backup Designated Routers on the attatched network for this OSPF area. | ||||
| CospfAreaIntfNbrChange | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.3.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of changes in the set of bidirectional neighbours associated with the interface in this OSPF area. | ||||
| TospfAreaErrorStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.4 | NA | ||
table · not-accessible · current The table of OSPF Area Error Statistics. | ||||
| RospfAreaErrorStatsEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.4.1 | NA | ||
| CospfAreaErrIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the OSPF Area for which these statistics apply. | ||||
| CospfAreaErrAuthFailure | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.4.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received with a wrong password in this area. | ||||
| CospfAreaErrNetmaskMismatch | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.4.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received with a wrong netmask in this area. | ||||
| CospfAreaErrHelloMismatch | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.4.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received with a different hello interval in this area. | ||||
| CospfAreaErrDeadMismatch | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.4.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received with a different dead interval in this area. | ||||
| CospfAreaErrOptionsMismatch | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.4.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received with a different options in this area. | ||||
| CospfAreaErrUnknownNbr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.4.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received from an unknown neighbor in this area. | ||||
| CospfAreaErrAreaMismatch | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.4.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received with a wrong area. | ||||
| NospfInterface | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3 | |||
| TospfIntfRxTxStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1 | NA | ||
table · not-accessible · current The table of OSPF Interface Rx/Tx packet Statistics. | ||||
| RospfIntfRxTxStatsEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1 | NA | ||
| CospfIntfRxTxIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF interface for which these statistics apply. | ||||
| CospfIntfRxPkts | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of OSPF packets received for this OSPF interface. | ||||
| CospfIntfTxPkts | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of OSPF packets transmitted for this OSPF interface. | ||||
| CospfIntfRxHello | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Hello packets received for this OSPF interface. | ||||
| CospfIntfTxHello | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Hello packets transmitted for this OSPF interface. | ||||
| CospfIntfRxDatabase | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Database Description packets received for this OSPF interface. | ||||
| CospfIntfTxDatabase | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Database Description packets transmitted for this OSPF interface. | ||||
| CospfIntfRxlsReqs | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Request packets received for this OSPF interface. | ||||
| CospfIntfTxlsReqs | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Request packets transmitted for this OSPF interface. | ||||
| CospfIntfRxlsAcks | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Acknowledgement packets received for this OSPF interface. | ||||
| CospfIntfTxlsAcks | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Acknowledgement packets transmitted for this OSPF interface. | ||||
| CospfIntfRxlsUpdates | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Update packets received for this OSPF interface. | ||||
| CospfIntfTxlsUpdates | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Update packets transmitted for this OSPF interface. | ||||
| TospfIntfNbrChangeStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2 | NA | ||
table · not-accessible · current The table of OSPF Interface Neighbour change Statistics. | ||||
| RospfIntfNbrChangeStatsEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1 | NA | ||
| CospfIntfNbrIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the OSPF Interface for which these statistics apply. | ||||
| CospfIntfNbrhello | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Hello packets received from neighbours in this OSPF interface. | ||||
| CospfIntfNbrStart | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of neighbours in this state (i.e. an indication that Hello packets should now be sent to the neighbour at intervals of HelloInterval seconds.) in this OSPF interface. | ||||
| CospfIntfNbrAdjointOk | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of decisions to be made (again) as to whether an adjacency should be established/maintained with the neighbour. for this OSPF interface. | ||||
| CospfIntfNbrNegotiationDone | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of neighbours in this state wherein the Master/slave relationship has been negotiated, and sequence numbers have been exchanged, for this OSPF interface. | ||||
| CospfIntfNbrExchangeDone | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of neighbours in this state (i.e. in an adjacency's final state) having transimitted a full sequence of Database Description packets, for this OSPF interface. | ||||
| CospfIntfNbrBadRequests | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Link State Requests which have been received for a link state advertisement not contained in the database for this interface. | ||||
| CospfIntfNbrBadSequence | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Database Description packets which have been received that either a) has an unexpected DD sequence number b) Unexpectedly has the init bit set c) Has an options field differing from the last Options field received in a Database Description packet. Any of these conditions indicate that some error has occured during adjacency establishment for this interface. | ||||
| CospfIntfNbrLoadingDone | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of link state updates received for all out-of-date portions of the database for this OSPF interface. | ||||
| CospfIntfNbrN1way | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Hello packets received from neighbours, in which this router is not mentioned for this OSPF interface. | ||||
| CospfIntfNbrRstAd | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current The sum total number of times the Neighbour adjacency has been reset on this interface. | ||||
| CospfIntfNbrDown | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Neighbouring routers down (i.e. in the initial state of a neighbour conversation.) for this interface. | ||||
| CospfIntfNbrN2way | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Hello packets received from neighbours, in which this router is mentioned for this OSPF interface. | ||||
| TospfIntfChangeStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.3 | NA | ||
table · not-accessible · current The table of OSPF Interface change Statistics. | ||||
| RospfIntfChangeStatsEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.3.1 | NA | ||
| CospfIntfIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the OSPF Interface for which these statistics apply. | ||||
| CospfIntfHello | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.3.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Hello packets sent by this interface. | ||||
| CospfIntfDown | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.3.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of times the interface was down. | ||||
| CospfIntfLoop | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.3.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of times the interface was no longer connected to the attatched network. | ||||
| CospfIntfUnloop | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.3.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of times the interface, connected back to the attatched network. | ||||
| CospfIntfWaitTimer | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.3.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of times the Wait Timer has been fired, (indicating the end of the waiting period that is required before electing a (Backup) Designated Router) for this OSPF interface. | ||||
| CospfIntfBackup | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.3.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of Backup Designated Routers on the attatched network for this OSPF interface. | ||||
| CospfIntfNbrChange | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.3.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of changes in the set of bidirectional neighbours associated with the interface for this OSPF interface. | ||||
| TospfIntfErrorStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.4 | NA | ||
table · not-accessible · current The table of OSPF Interface Error Statistics. | ||||
| RospfIntfErrorStatsEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.4.1 | NA | ||
| CospfIntfErrIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the OSPF Intf for which these statistics apply. | ||||
| CospfIntfErrAuthFailure | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.4.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received with a wrong password in this area. | ||||
| CospfIntfErrNetmaskMismatch | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.4.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received with a wrong netmask in this area. | ||||
| CospfIntfErrHelloMismatch | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.4.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received with a different hello interval in this area. | ||||
| CospfIntfErrDeadMismatch | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.4.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received with a different dead interval in this area. | ||||
| CospfIntfErrOptionsMismatch | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.4.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received with a different options in this area. | ||||
| CospfIntfErrUnknownNbr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.4.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received from an unknown neighbor in this area. | ||||
| CospfIntfErrAreaMismatch | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.4.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets received with a wrong area. | ||||
| NclearStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.6 | |||
| SipClearStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.6.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this to clear(1) results in clearing the IP statistics.
| ||||
| SvrrpClearStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.6.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this to clear(2) results in clearing the VRRP statistics.
| ||||
| SripClearStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.6.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this to clear(1) results in clearing the RIP statistics.
| ||||
| SospfClearStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.6.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this to clear(1) results in clearing the OSPF statistics.
| ||||
| StcpClearStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.6.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this to clear(1) results in clearing the TCP statistics.
| ||||
| SudpClearStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.6.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this to clear(1) results in clearing the UDP statistics.
| ||||
| SdnsClearStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.6.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this to clear(1) results in clearing the DNS statistics.
| ||||
| SarpClearStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.6.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this to clear(1) results in clearing the ARP statistics.
| ||||
| SicmpClearStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.6.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this to clear(1) results in clearing the ICMP statistics.
| ||||
| SrouteClearStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.6.11 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this to clear(1) results in clearing the Route statistics.
| ||||
| NigmpStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7 | |||
| TigmpSnoopStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1 | NA | ||
table · not-accessible · current The table of OSPF Interface Error Statistics. | ||||
| RigmpSnoopStatsEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1 | NA | ||
| CigmpSnoopVlanIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the VLAN for which these statistics apply. | ||||
| CrxIgmpValidPkts | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of valid IGMP packets received on this VLAN. | ||||
| CrxIgmpInvalidPkts | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of invalid IGMP packets received on this VLAN. | ||||
| CrxIgmpGenQueries | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of IGMP General Query packets received on this VLAN. | ||||
| CrxIgmpGrpSpecificQueries | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of IGMP Group Specific Query packets received on this VLAN. | ||||
| CrxIgmpLeaves | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of IGMP Leave packets received on this VLAN. | ||||
| CrxIgmpReports | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of IGMP Report packets received on this VLAN. | ||||
| CtxIgmpGrpSpecificQueries | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of IGMP Group Specific Query packets transmitted on this VLAN. | ||||
| CtxIgmpReports | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of IGMP Report packets transmitted on this VLAN. | ||||
| CtxIgmpLeaves | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of IGMP Leave packets transmitted on this VLAN. | ||||
| CigmpClearVlanStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current Setting this to clear(1) results in clearing the statistics for this snooping VLAN.
| ||||
| SigmpClearAllStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this to clear(1) results in clearing the IGMP statistics.
| ||||
| NipStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.8 | |||
| SipStatsInReceives | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.8.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current ip InReceive | ||||
| SipStatsInHdrErrors | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.8.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current ip InHdrError | ||||
| SipStatsInAddrErrors | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.8.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current ip InAddrErrors | ||||
| SipStatsInUnknownProtos | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.8.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current ip InUnknownProtos | ||||
| SipStatsInDiscards | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.8.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current ip InDiscards | ||||
| SipStatsInDelivers | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.8.6 | Counter32 | RO | |
scalar · Counter32 · read-only · current ip InDelivers | ||||
| SipStatsOutRequests | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.8.7 | Counter32 | RO | |
scalar · Counter32 · read-only · current ip OutRequests | ||||
| SipStatsOutDiscards | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.8.8 | Counter32 | RO | |
scalar · Counter32 · read-only · current ip OutDiscards | ||||
| SipStatsDefaultTTL | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.8.9 | Counter32 | RO | |
scalar · Counter32 · read-only · current ip DefaultTTL | ||||
| Nrip2Stats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13 | |||
| SripStatInPackets | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of RIP packets recieved. | ||||
| SripStatOutPackets | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of RIP packets transmitted. | ||||
| SripStatInRequestPkts | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of RIP requests recieved. | ||||
| SripStatInResponsePkts | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of RIP response recieved. | ||||
| SripStatOutRequestPkts | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of RIP requests transmitted. | ||||
| SripStatOutResponsePkts | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13.6 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of RIP responses transmitted. | ||||
| SripStatRouteTimeout | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13.7 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of RIP route timeouts. | ||||
| SripStatInBadSizePkts | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13.8 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of bad size RIP packets recieved. | ||||
| SripStatInBadVersion | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13.9 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of RIP bad versions recieved. | ||||
| SripStatInBadZeros | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13.10 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of RIP bad zeros recieved. | ||||
| SripStatInBadSourcePort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13.11 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of RIP bad source port recieved. | ||||
| SripStatInBadSourceIP | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13.12 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of RIP bad source IP recieved. | ||||
| SripStatInSelfRcvPkts | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13.13 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of RIP packets from self received. | ||||
| NdnsStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.14 | |||
| SdnsStatInGoodDnsRequests | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.14.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of good DNS request packets received. | ||||
| SdnsStatOutDnsRequests | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.14.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of DNS request packets | ||||
| SdnsStatInBadDnsRequests | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.14.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of bad DNS request packets received | ||||
| Ngeal3Stats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.15 | |||
| SmaxL3TableSize | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.15.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current Max L3 table size | ||||
| SnoL3EntriesUsed | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.15.2 | Integer32 | RO | |
scalar · Integer32 · read-only · current Number of L3 entries used | ||||
| SmaxLpmTableSize | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.15.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current Max LPM table size | ||||
| SnoLpmEntriesUsed | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.15.4 | Integer32 | RO | |
scalar · Integer32 · read-only · current Number of LPM entries used | ||||
| SmaxBlockInLpmTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.15.5 | Integer32 | RO | |
scalar · Integer32 · read-only · current Max number of blocks in LPM table | ||||
| SnoBlocksUsedInLpmTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.15.6 | Integer32 | RO | |
scalar · Integer32 · read-only · current Number of blocks used in LPM table | ||||
| Nlayer3Info | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3 | |||
| NipRoutingInfo | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1 | |||
| TipRouteInfoTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.1 | NA | ||
table · not-accessible · current The table of run-time IP routes. | ||||
| RipRouteInfoEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.1.1 | NA | ||
| CipRouteInfoIndx | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of this route table. | ||||
| CipRouteInfoDestIp | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.1.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The destination IP address of this route. | ||||
| CipRouteInfoMask | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.1.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The destination IP mask of this route. | ||||
| CipRouteInfoGateway | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.1.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current The next-hop router address for this route. | ||||
| CipRouteInfoTag | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The tag-type for this route.
| ||||
| CipRouteInfoType | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The type of the route.
| ||||
| CipRouteInfoInterface | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.1.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The interface number for which the destination address is applicable. | ||||
| CipRouteInfoMetric | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.1.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current The metric of this route. | ||||
| SrouteTableClear | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this value to clear(2) clears the route table.
| ||||
| NarpInfo | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.2 | |||
| TarpInfoTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.2.1 | NA | ||
table · not-accessible · current The table of ARP entries. | ||||
| RarpInfoEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.2.1.1 | NA | ||
| CarpInfoDestIp | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.2.1.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The destination IP address of the ARP entry. | ||||
| CarpInfoMacAddr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.2.1.1.2 | PhysAddress | RO | |
column · PhysAddress · read-only · current The MAC address for the ARP entry. | ||||
| CarpInfoVLAN | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.2.1.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The VLAN identifier for the ARP entry. | ||||
| CarpInfoSrcPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.2.1.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The port number on which this entry's equivalence is effective. | ||||
| CarpInfoFlag | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.2.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The flag associated with this ARP entry.
| ||||
| SarpCacheClear | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.2.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this value to clear(2) clears the ARP cache.
| ||||
| NvrrpInfo | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3 | |||
| TvrrpInfoVirtRtrTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3.1 | NA | ||
table · not-accessible · current The table of VRRP virtual router run-time information. | ||||
| RvrrpInfoVirtRtrTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3.1.1 | NA | ||
row · not-accessible · current The run-time information about a VRRP virtual router.
| ||||
| CvrrpInfoVirtRtrIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The VRRP virtual router index. | ||||
| CvrrpInfoVirtRtrConfig | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The status of the VRRP virtual router.
| ||||
| CvrrpInfoVirtRtrID | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3.1.1.3 | INTEGER (1..255) | RO | |
column · INTEGER (1..255) · read-only · current The VRRP virtual router identifier. | ||||
| CvrrpInfoVirtRtrAddr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3.1.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current The VRRP virtual router IP address. | ||||
| CvrrpInfoVirtRtrIfIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3.1.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The IfIndex that the VRRP virtual router is representing. | ||||
| CvrrpInfoVirtRtrPriority | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3.1.1.6 | INTEGER (1..254) | RO | |
column · INTEGER (1..254) · read-only · current The priority value to be used by the specified VRRP virtual routers. | ||||
| CvrrpInfoVirtRtrState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The VRRP virtual router state.
| ||||
| CvrrpInfoVirtRtrOwnership | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3.1.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The VRRP virtual router ownership status.
| ||||
| NospfInfo | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4 | |||
| NospfGeneralInfo | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1 | |||
| SospfVersion | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current OSPF version.
| ||||
| SospfRouterID | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.2 | IpAddress | RO | |
scalar · IpAddress · read-only · current The router ID of the switch. | ||||
| SospfStartTime | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current The time when ospf has been started. | ||||
| SospfProcessUptime | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current The time since ospf has been started. | ||||
| SospfLsTypesSupported | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.5 | Integer32 | RO | |
scalar · Integer32 · read-only · current The Link State Types that are supported. | ||||
| SospfAreaBorderRouter | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.6 | INTEGER | RO | |
scalar · INTEGER · read-only · current Area Border Router Role.
| ||||
| SospfAreaBoundaryRouter | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current Area Boundary Router Role.
| ||||
| SospfExternalLsa | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.8 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of external LSAs. | ||||
| SospfIntfCountForRouter | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.9 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of interfaces for this router. | ||||
| SospfVlinkCountForRouter | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.10 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of virtual links for this router. | ||||
| SospfNewLsaReceived | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.11 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of new LSAs reveived. | ||||
| SospfTotalLsaOriginated | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.12 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of LSAs originated. | ||||
| SospfTotalNumberOfLsdbEntries | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.13 | Integer32 | RO | |
scalar · Integer32 · read-only · current Total number of entries in the Link State Database. | ||||
| SospfTotalNeighbours | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.14 | Integer32 | RO | |
scalar · Integer32 · read-only · current The total number of OSPF neighbours. | ||||
| SospfNbrInInitState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.15 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of neighbours in the initial state of exchange. | ||||
| SospfNbrInExchState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.16 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of neighbours in the exchange state. | ||||
| SospfNbrInFullState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.17 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of neighbours in the Full state of exchange. | ||||
| SospfTotalAreas | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.18 | Integer32 | RO | |
scalar · Integer32 · read-only · current The Total number of areas. | ||||
| SospfTotalTransitAreas | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.19 | Integer32 | RO | |
scalar · Integer32 · read-only · current The Total number of Transit areas. | ||||
| SospfTotalNssaAreas | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.20 | Integer32 | RO | |
scalar · Integer32 · read-only · current The Total number of NSSA areas. | ||||
| SospfTotalStubAreas | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.21 | Integer32 | RO | |
scalar · Integer32 · read-only · current The Total number of STUB areas. | ||||
| TospfAreaInfoTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2 | NA | ||
table · not-accessible · current The table of OSPF Area information. | ||||
| RospfAreaInfoEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1 | NA | ||
| CospfAreaInfoIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF area number for which the OSPF info table is related. | ||||
| CospfAreaInfoId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address of the OSPF area. | ||||
| CospfAreaInfoStatus | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Area Status: disabled(0), enabled(1).
| ||||
| CospfTotalNumberOfInterfaces | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The total number of interfaces for this OSPF area. | ||||
| CospfNumberOfInterfacesUp | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The number of interfaces UP in area. | ||||
| CospfAreaInfoAuthType | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Type of authentication being used: none(1) - no authentication password(2) - use password md5(3) - use MD5 authentication.
| ||||
| CospfAreaInfoSPF | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The number of times SPF ran. | ||||
| CospfNumberOfLsdbEntries | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current The number of Link State Database entries for this OSPF area. | ||||
| CospfAreaInfoAreaBorderRouter | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current The Area Border Router count. | ||||
| CospfAreaInfoASBoundaryRouter | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current The AS Boundary Router count. | ||||
| CospfAreaInfoTotalNeighbours | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current The total number of OSPF neighbors. | ||||
| CospfAreaInfoNeighborsINITstate | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.12 | Integer32 | RO | |
column · Integer32 · read-only · current Total neighbors in INIT state. | ||||
| CospfAreaInfoNeighborsEXCHstate | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.13 | Integer32 | RO | |
column · Integer32 · read-only · current Total neighbors in EXCH state. | ||||
| CospfAreaInfoNeighborsFULLstate | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.14 | Integer32 | RO | |
column · Integer32 · read-only · current Total neighbors in FULL state. | ||||
| CospfAreaInfoLsTypesAccepted | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.15 | DisplayString (SIZE (0..40)) | RO | |
column · DisplayString (SIZE (0..40)) · read-only · current LS types accepted by this area. | ||||
| TospfIntfInfoTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3 | NA | ||
table · not-accessible · current The table of OSPF Interface information. | ||||
| RospfIntfInfoEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1 | NA | ||
| CospfIfInfoIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF interface number for which the OSPF info table is related. | ||||
| CospfIfInfoIpAddress | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address of the OSPF interface. | ||||
| CospfIfInfoArea | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.3 | INTEGER (0..2) | RO | |
column · INTEGER (0..2) · read-only · current The index of the area that the interface belongs. | ||||
| CospfIfInfoAdminStatus | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Admin Status of the interface: down(0), up(1).
| ||||
| CospfIfInfoRouterID | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.5 | IpAddress | RO | |
column · IpAddress · read-only · current The router ID of the switch. | ||||
| CospfIfInfoState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The state of the interface: Down(0), Loopback(1), Waiting(2), P to P(3), DR(4), BackuDR(5), DR Other(6).
| ||||
| CospfIfInfoPriority | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.7 | INTEGER (1..255) | RO | |
column · INTEGER (1..255) · read-only · current Interface router priority | ||||
| CospfIfInfoDesignatedRouterID | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.8 | IpAddress | RO | |
column · IpAddress · read-only · current The OSPF Designated Router ID for this OSPF interface. | ||||
| CospfIfInfoDesignatedRouterIpAddress | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.9 | IpAddress | RO | |
column · IpAddress · read-only · current The OSPF Designated Router IP Address for this OSPF interface. | ||||
| CospfIfInfoBackupDesignatedRouterID | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.10 | IpAddress | RO | |
column · IpAddress · read-only · current The OSPF Backup Designated Router ID for this OSPF interface. | ||||
| CospfIfInfoBackupDesignatedRouterIpAddress | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.11 | IpAddress | RO | |
column · IpAddress · read-only · current The OSPF Backup Designated Router Ip Address for this OSPF interface. | ||||
| CospfIfInfoHello | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.12 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current The hello timer for this OSPF interface. | ||||
| CospfIfInfoDead | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.13 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current The dead timer for this OSPF interface. | ||||
| CospfIfInfoWait | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.14 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF Wait interval for this OSPF interface. | ||||
| CospfIfInfoRetransmit | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.15 | INTEGER (1..3600) | RO | |
column · INTEGER (1..3600) · read-only · current The retransmit interval for this OSPF interface. | ||||
| CospfIfInfoTransitDelay | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.16 | INTEGER (1..3600) | RO | |
column · INTEGER (1..3600) · read-only · current The transit delay for this OSPF interface. | ||||
| CospfIfInfoTotalNeighbours | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.17 | Integer32 | RO | |
column · Integer32 · read-only · current The total number of neighbours for this OSPF interface. | ||||
| CospfIfInfoEvents | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.18 | Integer32 | RO | |
column · Integer32 · read-only · current The total number of events for this OSPF interface. | ||||
| CospfIfInfoAuthType | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.19 | INTEGER | RO | |
column · INTEGER · read-only · current Type of authentication being used: none(1) - no authentication, password(2) - use password, md5(3) - use MD5 authentication.
| ||||
| TospfVirtIntfInfoTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4 | NA | ||
table · not-accessible · current The table of OSPF virtual interfaces information. | ||||
| RospfVirtIntfInfoEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1 | NA | ||
row · not-accessible · current Information about an OSPF virtual interface. | ||||
| CospfVirtIntfInfoIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF Virtual Interface number for which this table is related. | ||||
| CospfVirtIntfInfoIpAddr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address of this virtual interface. | ||||
| CospfVirtIntfInfoArea | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.3 | INTEGER (0..2) | RO | |
column · INTEGER (0..2) · read-only · current The index of the OSPF area to which this virtual interface belongs. | ||||
| CospfVirtIntfInfoRouterId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current The Router ID. | ||||
| CospfVirtIntfInfoState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current State disabled(0), enabled(1)
| ||||
| CospfVirtIntfInfoCost | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The cost of the virtual interface. | ||||
| CospfVirtIntfInfoTrans | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The transit delay for the virtual interface. | ||||
| CospfVirtIntfInfoHello | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.8 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Hello interval. | ||||
| CospfVirtIntfInfoDead | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.9 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Dead interval. | ||||
| CospfVirtIntfInfoWait | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.10 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Wait interval. | ||||
| CospfVirtIntfInfoRetra | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.11 | INTEGER (1..3600) | RO | |
column · INTEGER (1..3600) · read-only · current Retransmit interval. | ||||
| CospfVirtIntfInfoAuth | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.12 | DisplayString (SIZE (0..8)) | RO | |
column · DisplayString (SIZE (0..8)) · read-only · current Authentication. | ||||
| CospfVirtIntfInfoEvents | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current Events. | ||||
| CospfVirtIntfInfoNbr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.14 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address of the OSPF neighbor for this virtual interface. | ||||
| CospfVirtIntfInfoNbrState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.15 | INTEGER | RO | |
column · INTEGER · read-only · current State down(0),attempt(1),init(2),2 way(3), exstart(4),exchange(5),loading(6),full(7)
| ||||
| CospfVirtIntfInfoAreaId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.16 | IpAddress | RO | |
column · IpAddress · read-only · current Thea AreaId of the virtual interface. | ||||
| TospfIfNbrTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.5 | NA | ||
table · not-accessible · current The table of OSPF Interface Neighbor information. | ||||
| RospfIfNbrEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.5.1 | NA | ||
row · not-accessible · current Information about a OSPF interface, neighbor pair. | ||||
| CospfIfNbrIntfIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.5.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF Interface number for which this Interface/Nbr table is related. | ||||
| CospfIfNbrIpAddr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.5.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The OSPF Neighbor ID . | ||||
| CospfIfNbrPriority | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.5.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The priority of the OSPF neighbor. | ||||
| CospfIfNbrState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.5.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The state of the OSPF neighbor.
| ||||
| CospfIfNbrDesignatedRtr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.5.1.5 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address of the Designated Router for this OSPF Neighbor. | ||||
| CospfIfNbrBackupDesignatedRtr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.5.1.6 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address of the backup designated Router for this OSPF Neighbor. | ||||
| CospfIfNbrIpAddress | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.5.1.7 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address of the OSPF Neighbor. | ||||
| TospfSumRangesInfoTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.6 | NA | ||
table · not-accessible · current The table of OSPF summary ranges information. | ||||
| RospfSumRangesInfoEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.6.1 | NA | ||
| CospfSumRangesInfoIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.6.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF range index for which this table is related. | ||||
| CospfSumRangesInfoArea | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.6.1.2 | INTEGER (0..2) | RO | |
column · INTEGER (0..2) · read-only · current Area. | ||||
| CospfSumRangesInfoNetwork | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.6.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current Network. | ||||
| CospfSumRangesInfoMask | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.6.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current Mask. | ||||
| CospfSumRangesInfoAction | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.6.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Action propagate(0), hide(1)
| ||||
| CospfSumRangesInfoListType | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.6.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Summary address list Non-NSSA(0), NSSA(1)
| ||||
| TospfRoutesInfoTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.7 | NA | ||
table · not-accessible · current The table of OSPF routes information. | ||||
| RospfRoutesInfoEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.7.1 | NA | ||
| CospfRoutesInfoIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.7.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF route table entry index for which this table is related. | ||||
| CospfRoutesInfoDestination | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.7.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current Destination. | ||||
| CospfRoutesInfoMask | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.7.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current Mask. | ||||
| CospfRoutesInfoVia | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.7.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current Next hop. | ||||
| CospfRoutesInfoType | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.7.1.5 | DisplayString (SIZE (0..8)) | RO | |
column · DisplayString (SIZE (0..8)) · read-only · current Route type. Codes: IA - OSPF inter area, N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 * - best | ||||
| TospfLsdbInfoTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8 | NA | ||
table · not-accessible · current The OSPF Process's Link State Database. | ||||
| RospfLsdbInfoEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8.1 | NA | ||
| CospfLsdbInfoIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The 32 bit index in the table. | ||||
| CospfLsdbInfoAreaId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The 32 bit identifier of the Area from which the LSA was received. | ||||
| CospfLsdbInfoType | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The type of the link state advertisement. Each link state type has a separate advertise- ment format.
| ||||
| CospfLsdbInfoLsid | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement. | ||||
| CospfLsdbInfoRouterId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8.1.5 | IpAddress | RO | |
column · IpAddress · read-only · current The 32 bit number that uniquely identifies the originating router in the Autonomous System. | ||||
| CospfLsdbInfoSequence | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8.1.6 | OCTET STRING (SIZE (10)) | RO | |
column · OCTET STRING (SIZE (10)) · read-only · current The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement - displayed here in hexazecimal. | ||||
| CospfLsdbInfoAge | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current This field is the age of the link state adver- tisement in seconds. | ||||
| CospfLsdbInfoChecksum | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum. | ||||
| CospfLsdbInfoAdvertisement | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8.1.9 | OCTET STRING (SIZE (36)) | RO | |
column · OCTET STRING (SIZE (36)) · read-only · current The entire Link State Advertisement, including its header. | ||||
| TospfExtLsdbInfoTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.9 | NA | ||
table · not-accessible · current The OSPF Process's Links State Database. | ||||
| RospfExtLsdbInfoEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.9.1 | NA | ||
| CospfExtLsdbInfoIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.9.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The 32 bit index in the table. | ||||
| CospfExtLsdbInfoType | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.9.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The type of the link state advertisement. Each link state type has a separate advertise- ment format.
| ||||
| CospfExtLsdbInfoLsid | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.9.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement. | ||||
| CospfExtLsdbInfoRouterId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.9.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current The 32 bit number that uniquely identifies the originating router in the Autonomous System. | ||||
| CospfExtLsdbInfoSequence | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.9.1.5 | OCTET STRING (SIZE (10)) | RO | |
column · OCTET STRING (SIZE (10)) · read-only · current The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement - displayed here in hexazecimal. | ||||
| CospfExtLsdbInfoAge | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.9.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current This field is the age of the link state adver- tisement in seconds. | ||||
| CospfExtLsdbInfoChecksum | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.9.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum. | ||||
| CospfExtLsdbInfoAdvertisement | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.9.1.8 | OCTET STRING (SIZE (36)) | RO | |
column · OCTET STRING (SIZE (36)) · read-only · current The entire Link State Advertisement, including its header. | ||||
| NigmpInfo | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5 | |||
| TigmpInfoTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.1 | NA | ||
table · not-accessible · current The table of IGMP group membership information. | ||||
| RigmpInfoEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.1.1 | NA | ||
| CigmpInfoIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The igmp group number for which the IGMP info table is related. | ||||
| CigmpInfoGroupId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.1.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address of the IGMP group. | ||||
| CigmpInfoVlanId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.1.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The VLAN ID for this IGMP group. | ||||
| CigmpInfoVersion | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The Version of IGMP host.
| ||||
| CigmpInfoPortNum | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.1.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The Version of IGMP host. | ||||
| CigmpInfoExpires | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.1.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current The expiration time for this host. | ||||
| TigmpMrtrInfoTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.2 | NA | ||
table · not-accessible · current The table of IGMP mrouters. | ||||
| RigmpMrtrInfoEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.2.1 | NA | ||
| CigmpMrtrInfoIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The mrouter number for which the IGMP mrouter info table is related. | ||||
| CigmpMrtrInfoVlanId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.2.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The VLAN ID on which this IGMP mrouter is attached. | ||||
| CigmpMrtrInfoPortId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.2.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The port on which this IGMP mrouter is attached. | ||||
| CigmpMrtrInfoVersion | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.2.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The version of this IGMP mrouter. | ||||
| CigmpMrtrInfoExpires | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.2.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current The expiration time for this mrouter. | ||||
| CigmpMrtrInfoMrt | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.2.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The Maximum Query Response time of this IGMP mrouter. | ||||
| Nrip2Info | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7 | |||
| Nrip2GeneralInfo | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.1 | |||
| SripInfoState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current RIP global state.
| ||||
| SripInfoUpdatePeriod | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.1.2 | INTEGER (1..120) | RO | |
scalar · INTEGER (1..120) · read-only · current Update Period in seconds. | ||||
| Trip2InfoIntfTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2 | NA | ||
table · not-accessible · current The information table of RIP. | ||||
| RripInfoIntfEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1 | NA | ||
| CripInfoIntfIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The interface number for which the RIP information is related. | ||||
| CripInfoIntfVersion | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current RIP version.
| ||||
| CripInfoIntfAddress | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The interface address. | ||||
| CripInfoIntfState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The status of RIP protocol.
| ||||
| CripInfoIntfListen | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The status of listening to route updates.
| ||||
| CripInfoIntfTrigUpdate | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The status of triggered updates.
| ||||
| CripInfoIntfMcastUpdate | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The status of multicast updates.
| ||||
| CripInfoIntfPoisonReverse | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The status of RIP poison reverse.
| ||||
| CripInfoIntfSupply | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current The status of supplying route updates.
| ||||
| CripInfoIntfMetric | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.10 | INTEGER (1..15) | RO | |
column · INTEGER (1..15) · read-only · current RIP route metric for this interface. | ||||
| CripInfoIntfAuth | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current The type of Authentication used on this interface.
| ||||
| CripInfoIntfKey | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.12 | DisplayString (SIZE (0..16)) | RO | |
column · DisplayString (SIZE (0..16)) · read-only · current RIP update authentication password. | ||||
| CripInfoIntfDefault | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current Specifies what RIP does with default routes.
| ||||
| NipInfo | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8 | |||
| SipInfoRouterID | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.1 | IpAddress | RO | |
scalar · IpAddress · read-only · current Router ID information. | ||||
| TipIntfInfoTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.2 | NA | ||
table · not-accessible · current The table of IP interface information. | ||||
| RintfInfoEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.2.1 | NA | ||
| CintfInfoIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The interface number for which the information is related. | ||||
| CintfInfoAddr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.2.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The IP address of the interface. | ||||
| CintfInfoNetMask | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.2.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current The subnet mask of the interface. | ||||
| CintfInfoBcastAddr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.2.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current The broadcast address of the interface. | ||||
| CintfInfoVlan | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.2.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The VLAN number for this interface. | ||||
| CintfInfoStatus | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.2.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The status of the interface.
| ||||
| TgatewayInfoTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.3 | NA | ||
table · not-accessible · current The table containing information for the default gateways. | ||||
| RgatewayInfoEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.3.1 | NA | ||
| CgatewayInfoIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The gateway number for which the information is related. | ||||
| CgatewayInfoAddr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.3.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address of the default gateway. | ||||
| CgatewayInfoVlan | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.3.1.3 | Integer32 (0..4090) | RO | |
column · Integer32 (0..4090) · read-only · current The VLAN number for this gateway (0 for any). | ||||
| CgatewayInfoStatus | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.3.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The status of the default gateway.
| ||||
| SipInfoBootpRelayState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current The state of BOOTP relay.
| ||||
| SipInfoBootpRelayAddr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.5 | IpAddress | RO | |
scalar · IpAddress · read-only · current The IP address of BOOTP server. | ||||
| SipInfoBootpRelayAddr2 | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.6 | IpAddress | RO | |
scalar · IpAddress · read-only · current The IP address of second BOOTP server. | ||||
| SipInfoFwdState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current IP forwarding global state.
| ||||
| SipInfoFwdDirectedBcast | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.8 | INTEGER | RO | |
scalar · INTEGER · read-only · current The state of forwarding directed broadcasts.
| ||||
| TipInfoNwfTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.9 | NA | ||
table · not-accessible · current The table of IP network filter information. | ||||
| RipInfoNwfEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.9.1 | NA | ||
| CipInfoNwfIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.9.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The netowrk filter number for which the NWF is related. | ||||
| CipInfoNwfAddr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.9.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address of the network filter. | ||||
| CipInfoNwfMask | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.9.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The subnet mask of the network filter. | ||||
| CipInfoNwfState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.9.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The state of the network filter.
| ||||
| TipInfoRmapTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.10 | NA | ||
table · not-accessible · current The table of IP route map information. | ||||
| RipInfoRmapEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.10.1 | NA | ||
| CipInfoRmapIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.10.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The route map number for which the RMAP is related. | ||||
| CipInfoRmapLp | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.10.1.2 | Unsigned32 (0..4294967295) | RO | |
column · Unsigned32 (0..4294967295) · read-only · current The local-preference of the route map. 4294967295 means none | ||||
| CipInfoRmapMetric | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.10.1.3 | Unsigned32 (0..4294967295) | RO | |
column · Unsigned32 (0..4294967295) · read-only · current The metric of the route map. 4294967295 means none | ||||
| CipInfoRmapPrec | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.10.1.4 | INTEGER (1..255) | RO | |
column · INTEGER (1..255) · read-only · current The precedence of the route map. | ||||
| CipInfoRmapWeight | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.10.1.5 | INTEGER (0..65535) | RO | |
column · INTEGER (0..65535) · read-only · current The weight of the route map. 65535 means none | ||||
| CipInfoRmapState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.10.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable the route map.
| ||||
| CipInfoRmapAp | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.10.1.7 | DisplayString (SIZE (0..17)) | RO | |
column · DisplayString (SIZE (0..17)) · read-only · current The as-path prepend of the matched route. Up to 3 AS number can be displayed for the string. The usuage is:<AS number> [<AS number>][ <AS number>] | ||||
| CipInfoRmapMetricType | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.10.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The OSPF metric-type of the matched route.
| ||||
| NipOspfInfo | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11 | |||
| SipOspfInfoState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current OSPF global state.
| ||||
| SipOspfInfoDefaultRouteMetric | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.2 | INTEGER (0..16777215) | RO | |
scalar · INTEGER (0..16777215) · read-only · current The metric to be assigned. | ||||
| SipOspfInfoDefaultRouteMetricType | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current The AS External metric type to be assigned.
| ||||
| SipOspfInfoRouterID | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.4 | IpAddress | RO | |
scalar · IpAddress · read-only · current The router ID of the switch. | ||||
| SipOspfInfoLsdbLimit | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.5 | INTEGER (0..2000) | RO | |
scalar · INTEGER (0..2000) · read-only · current The LSDB limit for external LSA. | ||||
| TipOspfAreaInfoTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.6 | NA | ||
table · not-accessible · current The table of OSPF Area Information. | ||||
| RipOspfAreaInfoEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.6.1 | NA | ||
row · not-accessible · current Information about a OSPF area. | ||||
| CipOspfAreaInfoIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.6.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF area number for which the OSPF area table is related. | ||||
| CipOspfAreaInfoId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.6.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address of the OSPF area. | ||||
| CipOspfAreaInfoSpfInterval | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.6.1.3 | INTEGER (1..255) | RO | |
column · INTEGER (1..255) · read-only · current The SPF interval for the OSPF area. | ||||
| CipOspfAreaInfoAuthType | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.6.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Type of authentication being used. none(1) - no authentication password(2) - use password md5(3) - use MD5 authentication.
| ||||
| CipOspfAreaInfoType | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.6.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Type of Area. transit(0) stub(1) nssa(2)
| ||||
| CipOspfAreaInfoMetric | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.6.1.6 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Metric (1-65535) | ||||
| CipOspfAreaInfoStatus | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.6.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Status disabled(0) enabled(1)
| ||||
| TipOspfRangeInfoTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.7 | NA | ||
table · not-accessible · current The table of OSPF summary range information. | ||||
| RipOspfRangeInfoEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.7.1 | NA | ||
| CipOspfRangeInfoIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.7.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The range number for which the OSPF summary range table is related. | ||||
| CipOspfRangeInfoAddr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.7.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address of the range. | ||||
| CipOspfRangeInfoMask | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.7.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The mask of the range. | ||||
| CipOspfRangeInfoAreaIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.7.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The area index. | ||||
| CipOspfRangeInfoHideState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.7.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The state of the hide range.
| ||||
| CipOspfRangeInfoState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.7.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The state of the range.
| ||||
| TipOspfIntfInfoTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8 | NA | ||
table · not-accessible · current The table of OSPF Interface Information. | ||||
| RipOspfIntfInfoEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1 | NA | ||
| CipOspfIntfInfoIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF Interface number for which the OSPF Interface table is related. | ||||
| CipOspfIntfInfoId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address of the OSPF interface. | ||||
| CipOspfIntfInfoArea | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.3 | INTEGER (0..2) | RO | |
column · INTEGER (0..2) · read-only · current The index of the area that the interface belongs | ||||
| CipOspfIntfInfoMdkey | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.4 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current The MD5 key for the OSPF interface 0 (none) no MD5 authentication. | ||||
| CipOspfIntfInfoCost | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.5 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Interface cost | ||||
| CipOspfIntfInfoPrio | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.6 | INTEGER (1..255) | RO | |
column · INTEGER (1..255) · read-only · current Interface router priority | ||||
| CipOspfIntfInfoHello | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.7 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Hello interval | ||||
| CipOspfIntfInfoDead | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.8 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Dead interval | ||||
| CipOspfIntfInfoTrans | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.9 | INTEGER (1..3600) | RO | |
column · INTEGER (1..3600) · read-only · current Transit delay | ||||
| CipOspfIntfInfoRetra | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.10 | INTEGER (1..3600) | RO | |
column · INTEGER (1..3600) · read-only · current Retransmit interval | ||||
| CipOspfIntfInfoAuthKey | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.11 | DisplayString (SIZE (0..8)) | RO | |
column · DisplayString (SIZE (0..8)) · read-only · current Authentication Key | ||||
| CipOspfIntfInfoStatus | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current Status of the interface
disabled(0),
enabled(1)
| ||||
| TipOspfVirtIntfInfoTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9 | NA | ||
table · not-accessible · current The table of OSPF Virtual Interface Information. | ||||
| RipOspfVirtIntfInfoEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1 | NA | ||
row · not-accessible · current Information about an OSPF virtual Interface. | ||||
| CipOspfVirtIntfInfoIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF Virtual Interface number for which the OSPF Virtual Interface table is related. | ||||
| CipOspfVirtIntfInfoAreaId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1.2 | INTEGER (0..2) | RO | |
column · INTEGER (0..2) · read-only · current The index of the OSPF area to which this virtual interface belongs. | ||||
| CipOspfVirtIntfInfoNbr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address of the OSPF neighbor for this virtual interface. | ||||
| CipOspfVirtIntfInfoMdkey | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1.4 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current The MD5 key for the OSPF virtual interface 0 (none) no MD5 authentication. | ||||
| CipOspfVirtIntfInfoHello | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1.5 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Hello interval | ||||
| CipOspfVirtIntfInfoDead | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1.6 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Dead interval | ||||
| CipOspfVirtIntfInfoTrans | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1.7 | INTEGER (1..3600) | RO | |
column · INTEGER (1..3600) · read-only · current Transit delay | ||||
| CipOspfVirtIntfInfoRetra | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1.8 | INTEGER (1..3600) | RO | |
column · INTEGER (1..3600) · read-only · current Retransmit interval | ||||
| CipOspfVirtIntfInfoAuthKey | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1.9 | DisplayString (SIZE (0..8)) | RO | |
column · DisplayString (SIZE (0..8)) · read-only · current Authentication Key | ||||
| CipOspfVirtIntfInfoStatus | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current Status
disabled(0),
enabled(1)
| ||||
| TipOspfHostInfoTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.10 | NA | ||
table · not-accessible · current The table of OSPF Host Information. | ||||
| RipOspfHostInfoEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.10.1 | NA | ||
row · not-accessible · current Information about a OSPF host. | ||||
| CipOspfHostInfoIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.10.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF host number for which the OSPF host table is related. | ||||
| CipOspfHostInfoIpAddr | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.10.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address of the OSPF host. | ||||
| CipOspfHostInfoAreaIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.10.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The area index. | ||||
| CipOspfHostInfoCost | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.10.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The cost of the corresponding host. | ||||
| CipOspfHostInfoState | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.10.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable an OSPF Host
| ||||
| NipOspfRedistributeInfo | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.11 | |||
| NipOspfRedistributeStaticInfo | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.11.1 | |||
| SipOspfRedistributeStaticInfoMetric | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.11.1.1 | INTEGER (0..16777214) | RO | |
scalar · INTEGER (0..16777214) · read-only · current The metric to be assigned to static routes. A value of 0 indicates none. | ||||
| SipOspfRedistributeStaticInfoMetricType | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.11.1.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current The AS External metric type for static routes.
| ||||
| SipOspfRedistributeStaticInfoOutRmapList | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.11.1.3 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| NipOspfRedistributeFixedInfo | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.11.2 | |||
| SipOspfRedistributeFixedInfoMetric | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.11.2.1 | INTEGER (0..16777214) | RO | |
scalar · INTEGER (0..16777214) · read-only · current The export metric for fixed routes. A value of 0 indicates none | ||||
| SipOspfRedistributeFixedInfoMetricType | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.11.2.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current The AS External metric type for fixed routes.
| ||||
| SipOspfRedistributeFixedInfoOutRmapList | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.11.2.3 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| NipOspfRedistributeRipInfo | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.11.3 | |||
| SipOspfRedistributeRipInfoMetric | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.11.3.1 | INTEGER (0..16777214) | RO | |
scalar · INTEGER (0..16777214) · read-only · current The export metric for RIP routes. A value of 0 indicates none | ||||
| SipOspfRedistributeRipInfoMetricType | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.11.3.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current The AS External metric type for RIP routes.
| ||||
| SipOspfRedistributeRipInfoOutRmapList | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.11.3.3 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected | ||||
| TipOspfMd5keyInfoTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.12 | NA | ||
table · not-accessible · current The table of OSPF MD5 keys Information. | ||||
| RipOspfMd5keyInfoEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.12.1 | NA | ||
| CipOspfMd5keyInfoIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.12.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The OSPF MD5 Key number for which the OSPF MdKey table is related. | ||||
| CipOspfMd5keyInfoKey | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.12.1.2 | DisplayString (SIZE (0..16)) | RO | |
column · DisplayString (SIZE (0..16)) · read-only · current The character string representing the MD5 Key. | ||||
| Nlayer3Oper | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.4 | |||
| NvrrpOper | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.4.1 | |||
| TvrrpOperVirtRtrTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.4.1.1 | NA | ||
table · not-accessible · current An entry in the table of virtual routers. | ||||
| RvrrpOperVirtRtrEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.4.1.1.1 | NA | ||
| CvrrpOperVirtRtrIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.4.1.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index for the VRRP virtual router. | ||||
| CvrrpOperVirtRtrBackup | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.4.1.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current When set to a value of 'backup(2)' it forces the specified master virtual router into backup mode. 'ok(1)' is returned when the object os read.
| ||||
| SvrrpOperVirtRtrGroupBackup | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.4.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current When set to a value of 'backup(2)' it forces the specified master virtual router group into backup mode. 'ok(1)' is returned when the object os read.
| ||||
| NbntTraps | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.7 | |||
| !bntSwDefGwUp | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.2 | |||
notification A bntSwDefGwUp trap signifies that the default gateway is alive.
| ||||
| !bntSwDefGwDown | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.3 | |||
notification A bntSwDefGwDown trap signifies that the default gateway is down.
| ||||
| !bntSwDefGwInService | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.4 | |||
notification A bntSwDefGwEnabled trap signifies that the default gateway is up and in service.
| ||||
| !bntSwDefGwNotInService | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.5 | |||
notification A bntSwDefGwDisabled trap signifies that the default gateway is alive but not in service.
| ||||
| !bntSwLoginFailure | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.19 | |||
notification A bntSwLoginFailure trap signifies that someone failed to enter a valid username/password combination.
| ||||
| !bntSwTempExceedThreshold | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.22 | |||
notification A bntSwTempExceedThreshold trap signifies that the switch temperature has exceeded maximum safety limits.
| ||||
| !bntSwApplyComplete | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.27 | |||
notification A bntSwApplyComplete signifies that new configuration has been applied.
| ||||
| !bntSwSaveComplete | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.28 | |||
notification A bntSwApplyComplete signifies that new configuration has been saved.
| ||||
| !bntSwFwDownloadSucess | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.29 | |||
notification A bntSwFwDownloadSuccess signifies that firmware has been downloaded to [image1|image2|boot image].
| ||||
| !bntSwFwDownloadFailure | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.30 | |||
notification A bntSwFwDownloadFailure signifies that firmware downloaded failed to [image1|image2|boot image].
| ||||
| !bntSwTempReturnThreshold | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.31 | |||
notification A bntSwTempReturnThreshold trap signifies that the switch temperature has returned below maximum safety limits.
| ||||
| !bntSwUfdfoLtMFailure | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.34 | |||
notification A bntSwUfdfoLtMFailure trap signifies that a LtM link is down.
| ||||
| !bntSwUfdfoLtMUP | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.35 | |||
notification A bntSwUfdfoLtMUP trap signifies that a LtM link is up.
| ||||
| !bntSwUfdfoGlobalEna | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.36 | |||
notification A bntSwUfdfoGlobalEna trap signifies that Global UFD is enabled.
| ||||
| !bntSwUfdfoGlobalDis | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.37 | |||
notification A bntSwUfdfoGlobalDis trap signifies that Global UFD is disabled.
| ||||
| !bntSwUfdfoLtDAutoEna | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.38 | |||
notification A bntSwUfdfoLtDAutoEna trap signifies that a LtD link is Auto Enabled.
| ||||
| !bntSwUfdfoLtDAutoDis | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.39 | |||
notification A bntSwUfdfoLtDAutoDis trap signifies that a LtD link is Auto Disabled.
| ||||
| !bntSwStgNewRoot | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.42 | |||
notification A bntSwStgNewRoot trap signifies that the bridge has become the new root of the STG. | ||||
| !bntSwCistNewRoot | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.43 | |||
notification A bntSwCistNewRoot trap signifies that the bridge has become the new root of the CIST.
| ||||
| !bntSwStgTopologyChanged | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.44 | |||
notification A bntSwStgTopologyChanged trap signifies that there was a STG topology change. | ||||
| !bntSwCistTopologyChanged | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.45 | |||
notification A bntSwCistTopologyChanged trap signifies that there was a CIST topology change.
| ||||
| !bntSFPInserted | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.51 | |||
notification A bntSFPInserted trap signifies that a SFP is inserted.
| ||||
| !bntSFPRemoved | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.52 | |||
notification A bntSFPRemoved trap signifies that a SFP is removed.
| ||||
| SbntSwTrapDisplayString | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.1000 | DisplayString (SIZE (0..255)) | RO | |
scalar · DisplayString (SIZE (0..255)) · read-only · current Temporary string object used to store information being sent in an BNT Switch trap. | ||||
| Nqos | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.8 | |||
| NqosConfigs | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1 | |||
| Nqos8021p | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1 | |||
| TqosCurCfgPortPriorityTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.1 | NA | ||
table · not-accessible · current The table of QOS Port Priority configuration. | ||||
| RqosCurCfgPortPriorityEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.1.1 | NA | ||
row · not-accessible · current Information about a particular QOS Port Priority configuration.
| ||||
| CqosCurCfgPortIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current Switch Port Number | ||||
| CqosCurCfgPortPriority | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.1.1.2 | INTEGER (0..7) | RO | |
column · INTEGER (0..7) · read-only · current Switch Port Priority Should be between 0 and 7 | ||||
| TqosNewCfgPortPriorityTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.2 | NA | ||
table · not-accessible · current The table of QOS Port Priority configuration. | ||||
| RqosNewCfgPortPriorityEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.2.1 | NA | ||
row · not-accessible · current Information about a particular QOS Port Priority configuration.
| ||||
| CqosNewCfgPortIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current Switch Port Number | ||||
| CqosNewCfgPortPriority | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.2.1.2 | INTEGER (0..7) | RW | |
column · INTEGER (0..7) · read-write · current Switch Port Priority Should be between 0 and 7 | ||||
| TqosCurCfgPriorityCoSTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.3 | NA | ||
table · not-accessible · current The table of Frame Priority and COSq configuration. | ||||
| RqosCurCfgPriorityCoSEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.3.1 | NA | ||
row · not-accessible · current Information about a particular Frame Priority and COSq configuration. | ||||
| CqosCurCfgPriorityIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.3.1.1 | INTEGER (0..7) | RO | |
column · INTEGER (0..7) · read-only · current Frame priority Number | ||||
| CqosCurCfgPriorityCoSq | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.3.1.2 | INTEGER (0..7) | RO | |
column · INTEGER (0..7) · read-only · current CoSq for a Frame Priority Should be between 0 and 7 | ||||
| TqosNewCfgPriorityCoSTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.4 | NA | ||
table · not-accessible · current The table of Frame Priority and COSq configuration. | ||||
| RqosNewCfgPriorityCoSEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.4.1 | NA | ||
row · not-accessible · current Information about a particular Frame Priority and COSq configuration. | ||||
| CqosNewCfgPriorityIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.4.1.1 | INTEGER (0..7) | RO | |
column · INTEGER (0..7) · read-only · current Frame priority Number | ||||
| CqosNewCfgPriorityCoSq | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.4.1.2 | INTEGER (0..7) | RW | |
column · INTEGER (0..7) · read-write · current CoSq for a Frame Priority Should be between 0 and 7 | ||||
| TqosCurCfgCosWeightTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.5 | NA | ||
table · not-accessible · current The table of CoSq and Weight configuration. | ||||
| RqosCurCfgCosWeightEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.5.1 | NA | ||
row · not-accessible · current Information about a particular CoSq and Weight configuration.
| ||||
| CqosCurCfgCosIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.5.1.1 | INTEGER (0..7) | RO | |
column · INTEGER (0..7) · read-only · current CoSq Number | ||||
| CqosCurCfgCosWeight | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.5.1.2 | INTEGER (0..15) | RO | |
column · INTEGER (0..15) · read-only · current Weight of CoSq | ||||
| TqosNewCfgCosWeightTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.6 | NA | ||
table · not-accessible · current The table of CoSq and Weight configuration. | ||||
| RqosNewCfgCosWeightEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.6.1 | NA | ||
row · not-accessible · current Information about a particular CoSq and Weight configuration.
| ||||
| CqosNewCfgCosIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.6.1.1 | INTEGER (0..7) | RO | |
column · INTEGER (0..7) · read-only · current CoSq Number | ||||
| CqosNewCfgCosWeight | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.6.1.2 | INTEGER (0..15) | RW | |
column · INTEGER (0..15) · read-write · current Weight of CoSq | ||||
| SqosDefaultCfg | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current Load default configuration.
| ||||
| NqosStats | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.2 | |||
| NqosInfo | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.3 | |||
| NqosOper | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.4 | |||
| Nacl | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9 | |||
| NacConfig | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1 | |||
| NacList | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1 | |||
| TaclCurCfgTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1 | NA | ||
table · not-accessible · current The table of current ACL configuration. | ||||
| RaclCurCfgEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1 | NA | ||
row · not-accessible · current Current information about a particular ACL configuration entry.
| ||||
| CaclCurCfgIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The index associated with this ACL entry. | ||||
| CaclCurCfgGroup | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The index of the ACL group to which this ACL entry is a member of. A value of zero means the ACL is not a member of any group. | ||||
| CaclCurCfgFilterAction | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The action to be performed on a packet that matches the filter settings of this ACL entry.
| ||||
| CaclCurCfgFilterActionSetPrio | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The value to be used when the action to be performed is setprio for this ACL entry.
| ||||
| CaclCurCfgEthFmt | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The packet ethernet format to be filtered.
| ||||
| CaclCurCfgTagFmt | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The packet tag format to be filtered.
| ||||
| CaclCurCfgIPFmt | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The packet IP format to be filtered.
| ||||
| CaclCurCfgSrcMACAddress | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.9 | MacAddress | RO | |
column · MacAddress · read-only · current The source MAC address to be filtered. | ||||
| CaclCurCfgSrcMACMask | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.10 | MacAddress | RO | |
column · MacAddress · read-only · current The address mask applied to aclCurCfgSrcMACAddress for filtering. | ||||
| CaclCurCfgDstMACAddress | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.11 | MacAddress | RO | |
column · MacAddress · read-only · current The destination MAC address to be filtered. | ||||
| CaclCurCfgDstMACMask | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.12 | MacAddress | RO | |
column · MacAddress · read-only · current The address mask applied to aclCurCfgDstMACAddress for filtering. | ||||
| CaclCurCfgEthernetTypeName | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current The Ethernet type to be filtered. If the value of this object is other(7), the value of aclNewCfgEthernetTypeValue indicates the ethernet type that will be filtered.
| ||||
| CaclCurCfgEthernetTypeValue | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.14 | INTEGER (1536..65535) | RO | |
column · INTEGER (1536..65535) · read-only · current The Ethernet type value to be filtered. The value of this object is equivalent to the value of aclNewCfgEthernetTypeName except when the value of aclNewCfgEthernetTypeName is other(7), which can be any user-defined value for this object. | ||||
| CaclCurCfgVLanId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.15 | INTEGER (0..4095) | RO | |
column · INTEGER (0..4095) · read-only · current The virtual LAN identifier to be filtered. | ||||
| CaclCurCfgVLanMask | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.16 | DisplayString | RO | |
column · DisplayString · read-only · current The mask applied to aclCurCfgVLanId for filtering. | ||||
| CaclCurCfg8021pPriority | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.17 | INTEGER | RO | |
column · INTEGER · read-only · current The 802.1p priority to be filtered.
| ||||
| CaclCurCfgTypeOfService | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.18 | DisplayString | RO | |
column · DisplayString · read-only · current The type of service to be filtered. | ||||
| CaclCurCfgProtocol | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.19 | DisplayString | RO | |
column · DisplayString · read-only · current The protocol to be filtered. | ||||
| CaclCurCfgSrcIPAddress | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.20 | IpAddress | RO | |
column · IpAddress · read-only · current The source IP address to be filtered. | ||||
| CaclCurCfgSrcIPMask | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.21 | IpAddress | RO | |
column · IpAddress · read-only · current The address mask applied to aclCurCfgSrcIPAddress for filtering. | ||||
| CaclCurCfgDstIPAddress | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.22 | IpAddress | RO | |
column · IpAddress · read-only · current The destination IP address to be filtered. | ||||
| CaclCurCfgDstIPMask | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.23 | IpAddress | RO | |
column · IpAddress · read-only · current The address mask applied to aclCurCfgDstIPAddress for filtering. | ||||
| CaclCurCfgSrcPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.24 | INTEGER (0..65535) | RO | |
column · INTEGER (0..65535) · read-only · current The source TCP/UDP port number to be filtered. | ||||
| CaclCurCfgSrcPortMask | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.25 | DisplayString | RO | |
column · DisplayString · read-only · current The mask applied to aclCurCfgSrcPort for filtering. | ||||
| CaclCurCfgDstPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.26 | INTEGER (0..65535) | RO | |
column · INTEGER (0..65535) · read-only · current The destination TCP/UDP port number to be filtered. | ||||
| CaclCurCfgDstPortMask | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.27 | DisplayString | RO | |
column · DisplayString · read-only · current The mask applied to aclCurCfgDstPort for filtering. | ||||
| CaclCurCfgTCPFlags | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.28 | Bits | RO | |
column · Bits · read-only · current The TCP flags to be filtered. OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |________reserved1(0) where: - reserved1 - 0; - reserved2 - 0; - x - 0 or 1;
| ||||
| CaclCurCfgEgressPorts | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.29 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The port list in the ACL configured for egress filtering. The ports are presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ port 9 || || || ||___ port 8 || |____ port 7 || . . . ||_________ port 2 |__________ port 1 where x: 1 - the represented port is configured for filtering. 0 - the represented port is not configured for filtering. | ||||
| CaclCurCfgStatistics | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.30 | INTEGER | RO | |
column · INTEGER · read-only · current Whether statistics collection for this ACL is enabled or not.
| ||||
| CaclCurCfgTCPFlagsMask | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.39 | Bits | RO | |
column · Bits · read-only · current The TCP flags mask. OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |________reserved1(0) where: - reserved1 - 0; - reserved2 - 0; - x - 0 or 1;
| ||||
| CaclCurCfgMeterAction | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.41 | INTEGER | RO | |
column · INTEGER · read-only · current Meter Action for this ACL.
| ||||
| CaclCurCfgMeterEnable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.42 | INTEGER | RO | |
column · INTEGER · read-only · current Meter state for this ACL.
| ||||
| CaclCurCfgKbitsSec | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.43 | Unsigned32 (64..10000000) | RO | |
column · Unsigned32 (64..10000000) · read-only · current The commited rate of meter associated with this ACL entry. | ||||
| CaclCurCfgKbitsBurst | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.44 | INTEGER | RO | |
column · INTEGER · read-only · current The maxmium burst sizeof meter associated with this ACL entry.
| ||||
| CaclCurCfgInprofUser | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.45 | INTEGER (0..7) | RO | |
column · INTEGER (0..7) · read-only · current Set in profile user defined priority for this ACL. | ||||
| CaclCurCfgInprofDscp | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.46 | INTEGER (0..63) | RO | |
column · INTEGER (0..63) · read-only · current Set in profile pkts DSCP value. | ||||
| CaclCurCfgInprofTos | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.47 | INTEGER | RO | |
column · INTEGER · read-only · current To enable/disable setting in profile pkts based on TOS bits.
| ||||
| CaclCurCfgOutprofDscp | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.48 | INTEGER (0..63) | RO | |
column · INTEGER (0..63) · read-only · current Set out profile pkts DSCP value. | ||||
| CaclCurCfgInprofUserEnable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.49 | INTEGER | RO | |
column · INTEGER · read-only · current Set in profile update method for this ACL.
| ||||
| CaclCurCfgInprofDscpEnable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.50 | INTEGER | RO | |
column · INTEGER · read-only · current Whether in profile update DSCP for this ACL is enabled or not.
| ||||
| CaclCurCfgOutprofDscpEnable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.51 | INTEGER | RO | |
column · INTEGER · read-only · current Whether out profile update DSCP for this ACL is enabled or not.
| ||||
| TaclNewCfgTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2 | NA | ||
table · not-accessible · current The table of new ACL configuration. | ||||
| RaclNewCfgEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1 | NA | ||
row · not-accessible · current New information about a particular ACL configuration.
| ||||
| CaclNewCfgIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The index associated with this ACL entry. | ||||
| CaclNewCfgGroup | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The index of the ACL group to which this ACL entry is a member of. A value of zero means the ACL is not a member of any group. | ||||
| CaclNewCfgFilterAction | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The action to be performed on a packet that matches the filter settings of this ACL entry.
| ||||
| CaclNewCfgFilterActionSetPrio | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current The COS queue to be used when the action for this ACL entry is set to setprio.
| ||||
| CaclNewCfgEthFmt | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current The packet ethernet format to be filtered.
| ||||
| CaclNewCfgTagFmt | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current The packet tagging format to be filtered.
| ||||
| CaclNewCfgIPFmt | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current The packet IP format to be filtered.
| ||||
| CaclNewCfgSrcMACAddress | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.9 | MacAddress | RW | |
column · MacAddress · read-write · current The source MAC address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgSrcMACMask object, if not yet set, will be automatically set to ff:ff:ff:ff:ff. | ||||
| CaclNewCfgSrcMACMask | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.10 | MacAddress | RW | |
column · MacAddress · read-write · current The address mask to be applied to aclNewCfgSrcMACAddress for filtering. | ||||
| CaclNewCfgDstMACAddress | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.11 | MacAddress | RW | |
column · MacAddress · read-write · current The destination MAC address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgDstMACMask object, if not yet set, will be automatically set to ff:ff:ff:ff:ff. | ||||
| CaclNewCfgDstMACMask | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.12 | MacAddress | RW | |
column · MacAddress · read-write · current The address mask to be applied to aclNewCfgDstMACAddress for filtering. | ||||
| CaclNewCfgEthernetTypeName | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current The Ethernet type to be filtered. If the value of this
object is other(7), the value of aclNewCfgEthernetTypeValue
indicates the ethernet type that will be filtered. If this
object is set to a value other than other(7), the value of
the aclNewCfgEthernetTypeValue object is automatically set,
as follows:
aclNewCfgEthernetTypeName aclNewCfgEthernetTypeValue
none(0) 0
arp(1) 2054 (0x0806)
ipv4(2) 2048 (0x0800)
ipv6(3) 34525 (0x86dd)
mpls(4) 34887 (0x8847)
rarp(5) 32821 (0x8035)
any(6) 65535 (0xffff)
| ||||
| CaclNewCfgEthernetTypeValue | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.14 | INTEGER (1536..65535) | RW | |
column · INTEGER (1536..65535) · read-write · current The Ethernet type value to be filtered. The value of this object is equivalent to the value of aclNewCfgEthernetTypeName except when the value of aclNewCfgEthernetTypeName is other(7), which can be any user-defined value for this object. | ||||
| CaclNewCfgVLanId | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.15 | INTEGER (1..4095) | RW | |
column · INTEGER (1..4095) · read-write · current The virtual LAN identifier to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgVLanMask object, if not yet set, will be automatically set to 4095 (0xfff). | ||||
| CaclNewCfgVLanMask | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.16 | DisplayString | RW | |
column · DisplayString · read-write · current The mask to be applied to aclNewCfgVLanId for filtering. | ||||
| CaclNewCfg8021pPriority | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.17 | INTEGER | RW | |
column · INTEGER · read-write · current The 802.1p priority to be filtered.
| ||||
| CaclNewCfgTypeOfService | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.18 | DisplayString | RW | |
column · DisplayString · read-write · current The type of service to be filtered. | ||||
| CaclNewCfgProtocol | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.19 | DisplayString | RW | |
column · DisplayString · read-write · current The protocol to be filtered. | ||||
| CaclNewCfgSrcIPAddress | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.20 | IpAddress | RW | |
column · IpAddress · read-write · current The source IP address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgSrcIPMask object, if not yet set, will be automatically set to 255.255.255.255. | ||||
| CaclNewCfgSrcIPMask | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.21 | IpAddress | RW | |
column · IpAddress · read-write · current The address mask to be applied to aclNewCfgSrcIPAddress for filtering. | ||||
| CaclNewCfgDstIPAddress | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.22 | IpAddress | RW | |
column · IpAddress · read-write · current The destination IP address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgDstIPMask object, if not yet set, will be automatically set to 255.255.255.255. | ||||
| CaclNewCfgDstIPMask | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.23 | IpAddress | RW | |
column · IpAddress · read-write · current The address mask to be applied to aclNewCfgDstIPAddress for filtering. | ||||
| CaclNewCfgSrcPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.24 | INTEGER (1..65535) | RW | |
column · INTEGER (1..65535) · read-write · current The source TCP/UDP port number to be filtered. Whenever this object is set if the aclNewCfgSrcPortMask object is not set will be automatically set to 65535 (0xffff). | ||||
| CaclNewCfgSrcPortMask | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.25 | DisplayString | RW | |
column · DisplayString · read-write · current The mask to be applied to aclNewCfgSrcPort for filtering. | ||||
| CaclNewCfgDstPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.26 | INTEGER (1..65535) | RW | |
column · INTEGER (1..65535) · read-write · current The destination TCP/UDP port number to be filtered. Whenever this object is set the aclNewCfgSrcPortMask object, if not yet set, will be automatically set to 65535 (0xffff). | ||||
| CaclNewCfgDstPortMask | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.27 | DisplayString | RW | |
column · DisplayString · read-write · current The mask to be applied to aclNewCfgDstPort for filtering. | ||||
| CaclNewCfgTCPFlags | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.28 | Bits | RW | |
column · Bits · read-write · current The TCP flags to be filtered. The TCP flags are presented in bitmap format, as follows: OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |________reserved1(0) where: - reserved1 - 0; - reserved2 - 0; - x - 0 or 1;
| ||||
| CaclNewCfgEgressPorts | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.29 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The port list in the ACL configured for egress filtering. The ports are presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ port 9 || || || ||___ port 8 || |____ port 7 || . . . ||_________ port 2 |__________ port 1 where x: 1 - the represented port is configured for filtering. 0 - the represented port is not configured for filtering. | ||||
| CaclNewCfgStatistics | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.30 | INTEGER | RW | |
column · INTEGER · read-write · current Whether statistics collection for this ACL is enabled or not.
| ||||
| CaclNewCfgAddEgressPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.31 | INTEGER | RW | |
column · INTEGER · read-write · current The port to be added to the specified ACL for egress filtering. A value of zero is always returned when this object is read. | ||||
| CaclNewCfgRemoveEgressPort | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.32 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The port to be removed from the specified ACL. A value of zero is always returned when this object is read. | ||||
| CaclNewCfgDelete | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.33 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to delete an ACL entry. A value of other(1) is always returned when this object is read.
| ||||
| CaclNewCfgTCPFlagsMask | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.39 | Bits | RW | |
column · Bits · read-write · current The TCP flags mask. The TCP flags are presented in bitmap format, as follows: OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |________reserved1(0) where: - reserved1 - 0; - reserved2 - 0; - x - 0 or 1; Default value is 0x3f.
| ||||
| CaclNewCfgMeterAction | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.41 | INTEGER | RW | |
column · INTEGER · read-write · current Meter Action for this ACL.
| ||||
| CaclNewCfgMeterEnable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.42 | INTEGER | RW | |
column · INTEGER · read-write · current Meter state for this ACL.
| ||||
| CaclNewCfgKbitsSec | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.43 | Unsigned32 (64..10000000) | RW | |
column · Unsigned32 (64..10000000) · read-write · current The commited rate of meter associated with this ACL entry. | ||||
| CaclNewCfgKbitsBurst | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.44 | INTEGER | RW | |
column · INTEGER · read-write · current The maxmium burst sizeof meter associated with this ACL entry.
| ||||
| CaclNewCfgInprofUser | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.45 | INTEGER (0..7) | RW | |
column · INTEGER (0..7) · read-write · current Set in profile user defined priority for this ACL. | ||||
| CaclNewCfgInprofDscp | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.46 | INTEGER (0..63) | RW | |
column · INTEGER (0..63) · read-write · current Set in profile pkts DSCP value. | ||||
| CaclNewCfgInprofTos | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.47 | INTEGER | RW | |
column · INTEGER · read-write · current To enable/disable setting in profile pkts based on TOS bits.
| ||||
| CaclNewCfgOutprofDscp | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.48 | INTEGER (0..63) | RW | |
column · INTEGER (0..63) · read-write · current Set out profile pkts DSCP value. | ||||
| CaclNewCfgInprofUserEnable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.49 | INTEGER | RW | |
column · INTEGER · read-write · current Set in profile update method for this ACL.
| ||||
| CaclNewCfgInprofDscpEnable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.50 | INTEGER | RW | |
column · INTEGER · read-write · current Whether in profile update DSCP for this ACL is enabled or not.
| ||||
| CaclNewCfgOutprofDscpEnable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.51 | INTEGER | RW | |
column · INTEGER · read-write · current Whether out profile update DSCP for this ACL is enabled or not.
| ||||
| CaclNewCfgReset | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.52 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to reset an ACL entry. A value of other(1) is always returned when this object is read.
| ||||
| CaclNewCfgEthernetReset | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.53 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to reset an ACL Ethernet entry. A value of other(1) is always returned when this object is read.
| ||||
| CaclNewCfgIpv4Reset | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.54 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to reset an ACL IPV4 entry. A value of other(1) is always returned when this object is read.
| ||||
| CaclNewCfgTcpudpReset | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.55 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to reset an ACL Tcpudp entry. A value of other(1) is always returned when this object is read.
| ||||
| CaclNewCfgMeterReset | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.56 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to reset an ACL Meter entry. A value of other(1) is always returned when this object is read.
| ||||
| CaclNewCfgRemarkReset | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.57 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to reset an ACL Remark entry. A value of other(1) is always returned when this object is read.
| ||||
| CaclNewCfgRemarkInprofReset | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.58 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to reset an ACL Remark Inprof entry. A value of other(1) is always returned when this object is read.
| ||||
| CaclNewCfgRemarkOutprofReset | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.59 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to reset an ACL Remark Outprof entry. A value of other(1) is always returned when this object is read.
| ||||
| CaclNewCfgPktfmtReset | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.60 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to reset an ACL Pktfmt entry. A value of other(1) is always returned when this object is read.
| ||||
| NaclGroup | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3 | |||
| TaclGroupCurCfgTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.1 | NA | ||
table · not-accessible · current The table of current ACL Group configuration. | ||||
| RaclGroupCurCfgEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.1.1 | NA | ||
row · not-accessible · current Information about a particular ACL configuration.
| ||||
| CaclGroupCurCfgIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.1.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The index associated with this ACL Group entry. | ||||
| CaclGroupCurCfgMemberAcls | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.1.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The ACL members of this ACL group, presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ ACL 9 || || || ||___ ACL 8 || |____ ACL 7 || . . . ||_________ ACL 2 |__________ ACL 1 where x: 1 - the represented ACL is a member of the group. 0 - the represented ACL is not a member of the group. | ||||
| TaclGroupNewCfgTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.2 | NA | ||
table · not-accessible · current The table of new ACL Group configuration. | ||||
| RaclGroupNewCfgEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.2.1 | NA | ||
row · not-accessible · current New information about a particular ACL configuration.
| ||||
| CaclGroupNewCfgIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.2.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The index associated with this ACL Group entry. | ||||
| CaclGroupNewCfgMemberAcls | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.2.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The ACL members of this ACL group, presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ ACL 9 || || || ||___ ACL 8 || |____ ACL 7 || . . . ||_________ ACL 2 |__________ ACL 1 where x: 1 - the represented ACL is a member of the group. 0 - the represented ACL is not a member of the group. | ||||
| CaclGroupNewCfgAddAcl | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.2.1.4 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The index of the ACL entry to be added into this ACL group. A successful set operation on this object will also set the bit corresponding to the ACL entry in the aclGroupNewCfgMemberAcls bitmap. A value of zero is always returned when this object is read. | ||||
| CaclGroupNewCfgRemoveAcl | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.2.1.5 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The index of the ACL entry to be removed from this ACL group. A successful set operation on this object will unset the bit corresponding to the ACL entry in the aclGroupNewCfgMemberAcls bitmap. A value of zero is always returned when this object is read. | ||||
| CaclGroupNewCfgDelete | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.2.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current This is an action object to delete an ACL group. A value of other(1) is always returned when this object is read.
| ||||
| NaclCfg | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4 | |||
| TaclCurCfgPortTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.1 | NA | ||
table · not-accessible · current The table of port acl groups configuration. | ||||
| RaclCurCfgPortTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.1.1 | NA | ||
row · not-accessible · current Information about a particular port acl configuration.
| ||||
| CaclCurCfgPortIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The identifier of a particular port. This is also index to the entLogicalTable of Entity MIB. | ||||
| CaclCurCfgPortAclBmap | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.1.1.2 | OCTET STRING (SIZE (0..512)) | RO | |
column · OCTET STRING (SIZE (0..512)) · read-only · current The acls applied to the port. The acls are
presented in bitmap format. This string displays acl number
from 1 to 896.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ acl 9
|| ||
|| ||___ acl 8
|| |____ acl 7
|| . . .
||_________ acl 2
|__________ acl 1
where x : 1 - The represented acl applied to the port.
0 - The represented acl not applied to the port. | ||||
| CaclCurCfgPortAclGrpBmap | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.1.1.4 | OCTET STRING (SIZE (0..512)) | RO | |
column · OCTET STRING (SIZE (0..512)) · read-only · current The acl groups applied to the port. The acls are
presented in bitmap format. This string displays acl number
from 1 to 896.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ aclgrp 9
|| ||
|| ||___ aclgrp 8
|| |____ aclgrp 7
|| . . .
||_________ aclgrp 2
|__________ aclgrp 1
where x : 1 - The represented acl applied to the port.
0 - The represented acl not applied to the port. | ||||
| TaclNewCfgPortTable | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.2 | NA | ||
table · not-accessible · current The table of port acl configuration. | ||||
| RaclNewCfgPortTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.2.1 | NA | ||
row · not-accessible · current Information about a particular port acl groups configuration.
| ||||
| CaclNewCfgPortIndex | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The identifier of a particular port. This is also index to the entLogicalTable of Entity MIB. | ||||
| CaclNewCfgPortAddAcl | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.2.1.2 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The acl to be added to the specified port. A '0' value is returned when read. | ||||
| CaclNewCfgPortAddAclGrp | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.2.1.4 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The acl group to be added to the specified port. A '0' value is returned when read. | ||||
| CaclNewCfgPortRemoveAcl | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.2.1.5 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The acl to be removed from the specified port. A '0' value is returned when read. | ||||
| CaclNewCfgPortRemoveAclGrp | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.2.1.7 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The acl group to be removed from the specified port. A '0' value is returned when read. | ||||
| CaclNewCfgPortAclBmap | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.2.1.8 | OCTET STRING (SIZE (0..512)) | RO | |
column · OCTET STRING (SIZE (0..512)) · read-only · current The acls applied to the port. The acls are
presented in bitmap format. This string displays acl number
from 1 to 896.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ acl 9
|| ||
|| ||___ acl 8
|| |____ acl 7
|| . . .
||_________ acl 2
|__________ acl 1
where x : 1 - The represented acl applied to the port.
0 - The represented acl not applied to the port. | ||||
| CaclNewCfgPortAclGrpBmap | 1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.2.1.10 | OCTET STRING (SIZE (0..512)) | RO | |
column · OCTET STRING (SIZE (0..512)) · read-only · current The acl groups applied to the port. The acl groups are
presented in bitmap format. This string displays group number
from 1 to 4096.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ aclgrp 9
|| ||
|| ||___ aclgrp 8
|| |____ aclgrp 7
|| . . .
||_________ aclgrp 2
|__________ aclgrp 1
where x : 1 - The represented acl group applied to the port.
0 - The represented acl group not applied to the port. | ||||
Traps / Notifications
- bntSFPInserted
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.51 - bntSFPRemoved
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.52 - bntSwApplyComplete
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.27 - bntSwCistNewRoot
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.43 - bntSwCistTopologyChanged
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.45 - bntSwDefGwDown
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.3 - bntSwDefGwInService
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.4 - bntSwDefGwNotInService
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.5 - bntSwDefGwUp
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.2 - bntSwFwDownloadFailure
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.30 - bntSwFwDownloadSucess
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.29 - bntSwLoginFailure
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.19 - bntSwSaveComplete
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.28 - bntSwStgNewRoot
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.42 - bntSwStgTopologyChanged
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.44 - bntSwTempExceedThreshold
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.22 - bntSwTempReturnThreshold
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.31 - bntSwUfdfoGlobalDis
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.37 - bntSwUfdfoGlobalEna
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.36 - bntSwUfdfoLtDAutoDis
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.39 - bntSwUfdfoLtDAutoEna
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.38 - bntSwUfdfoLtMFailure
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.34 - bntSwUfdfoLtMUP
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.35