BLADETYPE2-SWITCH-MIB
Hewlett-PackardThe MIB module for the general switch configuration and information .
snmptranslate -m BLADETYPE2-SWITCH-MIB -Tpsnmpwalk -v2c -c <community> -m BLADETYPE2-SWITCH-MIB <host> 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1Imports
| BRIDGE-MIB | BridgeId |
|---|---|
| HP-SWITCH-PL-MIB | hpSwitchBladeType2-Mgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Iagent | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1 | |||
identity The MIB module for the general switch configuration and information . | ||||
| NagentConfig | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1 | |||
| NagSystem | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1 | |||
| SagApplyConfiguration | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is an action object to apply the changes made to configuration of the switch. By setting the value to apply(2), all the changes made since the last apply are written to the new_config block. other(1) is returned when this object ie read.
| ||||
| SagSavePending | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current This object, when read, gives the user information whether an save action is needed and that the configuration has been applied but not saved to the flash.
| ||||
| SagSaveConfiguration | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is an action object to write current configuration to nonvolatile storage. When issued with the saveActive, the active configuration in flash is saved to backup in flash and then the new configuration is saved to the active configuration in flash. When issued with notSaveActive, the active configuration is NOT saved to the flash and the active configuration is overwritten with the new configuration. ok(1) is returned always when read.
| ||||
| SagRevert | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is an action object to revert the unapplied changes made to the switch. By setting the value to revert(2), all the unapplied changes will be reverted. This action will copy the current_config to the new_config block. other(1) is returned when this object is read.
| ||||
| SagRevertApply | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is an action object to revert the unsaved changes made to the switch. By setting the value to revertApply(2), all the unsaved as well as unapplied changes will be reverted. other(1) is returned when this object is read.
| ||||
| SagReset | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is an action object to reboot the switch.
other(1) is returned always when read.
The following values are writable:
coldReset(2)...
warmReset(3)...
| ||||
| SagConfigForNxtReset | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current The configuration information to be loaded from at next reset.
The following values are writable:
active(2)...active configuration block
backup(3)...backup configuration block
default(4)..default configuration block
| ||||
| SagImageForNxtReset | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current The software image to be booted from at next reset.
The following values are writable:
image1(2)...image 1
image2(3)...image 2
| ||||
| SagSoftwareVersion | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.10 | DisplayString (SIZE (0..16)) | RO | |
scalar · DisplayString (SIZE (0..16)) · read-only · current The version of the software image that is currently running on the system in the form of 'major.minor.maintenance.bugfix'. A zero length string is returned if version is not available. | ||||
| SagBootVer | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.11 | DisplayString (SIZE (0..16)) | RO | |
scalar · DisplayString (SIZE (0..16)) · read-only · current The version of the boot code in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available. | ||||
| SagImage1Ver | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.12 | DisplayString (SIZE (0..128)) | RO | |
scalar · DisplayString (SIZE (0..128)) · read-only · current The version of the software image stored in image 1 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available or there is no valid software image. | ||||
| SagImage2Ver | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.13 | DisplayString (SIZE (0..128)) | RO | |
scalar · DisplayString (SIZE (0..128)) · read-only · current The version of the software image stored in image 2 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available or there is no valid software image. | ||||
| SagRtcDate | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.14 | DisplayString (SIZE (0..16)) | RW | |
scalar · DisplayString (SIZE (0..16)) · read-write · current The date on the real time clock in the form of 'mm/dd/yy'. A zero length string is returned if date is not available. | ||||
| SagRtcTime | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.15 | DisplayString (SIZE (0..16)) | RW | |
scalar · DisplayString (SIZE (0..16)) · read-write · current The time on the real time clock in the form of 'hh:mm:ss'. A zero length string is returned if time is not available. | ||||
| SagLastSetErrorReason | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.16 | DisplayString (SIZE (0..255)) | RO | |
scalar · DisplayString (SIZE (0..255)) · read-only · current The error reason of the last SET failure. | ||||
| SagCurCfgHttpServerPort | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.17 | INTEGER (1..65535) | RO | |
scalar · INTEGER (1..65535) · read-only · current The TCP port number that the HTTP server is listening to in the current_configuration block. | ||||
| SagNewCfgHttpServerPort | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.18 | INTEGER (1..65535) | RW | |
scalar · INTEGER (1..65535) · read-write · current The TCP port number that the HTTP server is listening to in the new_configuration block. | ||||
| SagCurCfgLoginBanner | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.19 | DisplayString (SIZE (0..79)) | RO | |
scalar · DisplayString (SIZE (0..79)) · read-only · current The user defined login banner. | ||||
| SagNewCfgLoginBanner | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.20 | DisplayString (SIZE (0..79)) | RW | |
scalar · DisplayString (SIZE (0..79)) · read-write · current The user defined login banner. | ||||
| SagCurCfgConsole | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.23 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable console output of syslog messages.
| ||||
| SagNewCfgConsole | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.24 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable console output of syslog messages.
| ||||
| SagCurCfgBootp | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.29 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable the use of BootP, as currently configured in the current_configuration block.
| ||||
| SagNewCfgBootp | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.30 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable the use of BootP, in the new_configuration block.
| ||||
| SagSlotNumber | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.31 | INTEGER (1..10) | RO | |
scalar · INTEGER (1..10) · read-only · current Identifies the slot in which this switch is installed. If the agent implementing this MIB is not a blade in a chassis this value has no meaning. | ||||
| SagCurCfgSnmpTimeout | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.32 | INTEGER (1..30) | RO | |
scalar · INTEGER (1..30) · read-only · current Once SNMP operations like agApplyConfig, agDiffState and agDumpState, which use the state machine are done the resources used by these operations need to be freed by setting the state back to 'idle' so others can issue the commands via SNMP. agSnmpTimeout indicates the number of minutes before the resources are freed and the state set back to 'idle' if this operation is not performed by the user. | ||||
| SagNewCfgSnmpTimeout | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.33 | INTEGER (1..30) | RW | |
scalar · INTEGER (1..30) · read-write · current Once SNMP operations like agApplyConfig, agDiffState and agDumpState, which use the state machine are done the resources used by these operations need to be freed by setting the state back to 'idle' so others can issue the commands via SNMP. agSnmpTimeout indicates the number of minutes before the resources are freed and the state set back to 'idle' if this operation is not performed by the user. | ||||
| SagCurCfgTelnetServerPort | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.34 | INTEGER (1..65535) | RO | |
scalar · INTEGER (1..65535) · read-only · current The TCP port number that the telnet server listens for telnet sessions. | ||||
| SagNewCfgTelnetServerPort | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.35 | INTEGER (1..65535) | RW | |
scalar · INTEGER (1..65535) · read-write · current The TCP port number that the telnet server listens for telnet sessions. | ||||
| SagClearFlashDump | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.36 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is an action object to clear the FLASH dump. ok(1) is returned when this object is read.
| ||||
| SagRackId | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.37 | DisplayString (SIZE (0..127)) | RO | |
scalar · DisplayString (SIZE (0..127)) · read-only · current The rack unique identifier. | ||||
| SagChassis | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.38 | DisplayString (SIZE (0..127)) | RO | |
scalar · DisplayString (SIZE (0..127)) · read-only · current Chassis serial number. | ||||
| SagCurCfgTftpServerPort | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.39 | INTEGER (1..65535) | RO | |
scalar · INTEGER (1..65535) · read-only · current The TCP port number that the TFTP server is listening to in the current_configuration block. | ||||
| SagNewCfgTftpServerPort | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.40 | INTEGER (1..65535) | RW | |
scalar · INTEGER (1..65535) · read-write · current The TCP port number that the TFTP server is listening to in the new_configuration block. | ||||
| SagCurCfgHttpsServerPort | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.49 | INTEGER (1..65535) | RO | |
scalar · INTEGER (1..65535) · read-only · current The TCP port number that the HTTPS server is listening to in the current_configuration block. | ||||
| SagNewCfgHttpsServerPort | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.50 | INTEGER (1..65535) | RW | |
scalar · INTEGER (1..65535) · read-write · current The TCP port number that the HTTPS server is listening to in the new_configuration block. | ||||
| SagCurDaylightSavings | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.51 | INTEGER | RO | |
scalar · INTEGER · read-only · current The daylight savings location.
| ||||
| SagNewDaylightSavings | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.52 | INTEGER | RW | |
scalar · INTEGER · read-write · current The daylight savings location.
| ||||
| SagCurCfgIdleCLITimeout | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.53 | Integer32 | RO | |
scalar · Integer32 · read-only · current Set idle CLI sessions timeout. | ||||
| SagNewCfgIdleCLITimeout | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.54 | Integer32 | RW | |
scalar · Integer32 · read-write · current Set idle CLI sessions timeout. | ||||
| SagCurCfgUfdTrap | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.55 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current status of the UFDFO SNMP trap.
| ||||
| SagNewCfgUfdTrap | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.56 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable sending UFDFO SNMP trap.
| ||||
| SagCurBootNxtCliMode | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.64 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current boot mode.
| ||||
| SagNewBootNxtCliMode | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.65 | INTEGER | RW | |
scalar · INTEGER · read-write · current Next cli boot mode.
| ||||
| SagCurCfgReminders | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.70 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current status of reminders feature.
| ||||
| SagNewCfgReminders | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.71 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable reminders feature.
| ||||
| NagPortConfig | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2 | |||
| SagPortTableMaxEnt | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the port configuration host table. | ||||
| TagPortCurCfgTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2 | NA | ||
table · not-accessible · current The table of port configuration in the current_configuration block. | ||||
| RagPortCurCfgTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1 | NA | ||
row · not-accessible · current A row in the port table in the current_configuration block.
| ||||
| CagPortCurCfgIndx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the row in port configurations table. | ||||
| CagPortCurCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current This is the state of the port.
| ||||
| CagPortCurCfgVlanTag | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current This is VLAN tag state of the port
| ||||
| CagPortCurCfgStp | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current This object is used to turn Spanning Tree on or off for the port.
| ||||
| CagPortCurCfgRmon | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current This object is used to turn RMON on or off on the port.
| ||||
| CagPortCurCfgPVID | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.6 | INTEGER (1..4095) | RO | |
column · INTEGER (1..4095) · read-only · current The default VLAN ID for the port. | ||||
| CagPortCurCfgGigEthAutoNeg | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current This object is used to turn the autonegotiation on or off for gigabit Ethernet connection.
| ||||
| CagPortCurCfgGigEthSpeed | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current Selects the port speed for gigabit Ethernet connection.
| ||||
| CagPortCurCfgGigEthMode | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current This object is used to select port mode for gigabit Ethernet connection.
| ||||
| CagPortCurCfgGigEthFctl | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.14 | INTEGER | RO | |
column · INTEGER · read-only · current This object is used to select port flow control for gigabit Ethernet connection.
| ||||
| CagPortCurCfgPortName | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.15 | DisplayString (SIZE (0..64)) | RO | |
column · DisplayString (SIZE (0..64)) · read-only · current The switch port name. | ||||
| CagPortCurCfgLinkTrap | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.18 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise.
| ||||
| CagPortCurCfgTagPVID | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.19 | INTEGER | RO | |
column · INTEGER · read-only · current This is PVID tag state of the port
| ||||
| CagPortCurCfgMulticastThreshold | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.20 | INTEGER | RO | |
column · INTEGER · read-only · current Current status of the port's Multicast Threshold.
| ||||
| CagPortCurCfgMulticastThresholdRate | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.21 | INTEGER (0..262143) | RO | |
column · INTEGER (0..262143) · read-only · current Current port's Multicast Threshold Rate. | ||||
| CagPortCurCfgBroadcastThreshold | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.22 | INTEGER | RO | |
column · INTEGER · read-only · current Current status of the port's Broadcast Threshold.
| ||||
| CagPortCurCfgBroadcastThresholdRate | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.23 | INTEGER (0..262143) | RO | |
column · INTEGER (0..262143) · read-only · current Current port's Broadcast Threshold Rate. | ||||
| CagPortCurCfgDLFThreshold | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.24 | INTEGER | RO | |
column · INTEGER · read-only · current Current status of the port's Destination Lookup Fail Threshold.
| ||||
| CagPortCurCfgDLFThresholdRate | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.25 | INTEGER (0..262143) | RO | |
column · INTEGER (0..262143) · read-only · current Current port's Destination Lookup Fail Threshold Rate. | ||||
| TagPortFiberCurCfgTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2 | NA | ||
table · not-accessible · current The table of fiber port configuration in the current_configuration block. | ||||
| RagPortFiberCurCfgTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2.1 | NA | ||
row · not-accessible · current A row in the fiber port table in the current_configuration block. | ||||
| CagPortFiberCurCfgIndx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the row in fiber port current configuration table. | ||||
| CagPortFiberCurCfgTxCtrl | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current This is the state of the TX control.
| ||||
| CagPortFiberCurCfgTxPulse | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current This is the state of the TX pulse.
| ||||
| CagPortFiberCurCfgTxUp | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2.1.4 | INTEGER (1..10) | RO | |
column · INTEGER (1..10) · read-only · current Current TX up time. | ||||
| CagPortFiberCurCfgTxDn | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2.1.5 | INTEGER (1..10) | RO | |
column · INTEGER (1..10) · read-only · current Current TX dn time. | ||||
| TagPortNewCfgTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3 | NA | ||
table · not-accessible · current The table of port configuration in the new_configuration block. | ||||
| RagPortNewCfgTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1 | NA | ||
row · not-accessible · current A row in the port configuration table in the new_configuration block.
| ||||
| CagPortNewCfgIndx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the row in port configurations table. | ||||
| CagPortNewCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current This is the state of the port.
| ||||
| CagPortNewCfgVlanTag | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current This is VLAN tag state of the port
| ||||
| CagPortNewCfgStp | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to turn Spanning Tree on or off for the port.
| ||||
| CagPortNewCfgRmon | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to turn RMON on or off on the port.
| ||||
| CagPortNewCfgPVID | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.6 | INTEGER (1..4095) | RW | |
column · INTEGER (1..4095) · read-write · current The default VLAN ID for the port. | ||||
| CagPortNewCfgGigEthAutoNeg | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to turn the autonegotiation on or off for gigabit Ethernet connection.
| ||||
| CagPortNewCfgGigEthSpeed | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.12 | INTEGER | RW | |
column · INTEGER · read-write · current Selects the port speed for gigabit Ethernet connection.
| ||||
| CagPortNewCfgGigEthMode | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to select port mode for gigabit Ethernet connection.
| ||||
| CagPortNewCfgGigEthFctl | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.14 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to select port flow control for gigabit Ethernet connection.
| ||||
| CagPortNewCfgPortName | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.15 | DisplayString (SIZE (0..64)) | RW | |
column · DisplayString (SIZE (0..64)) · read-write · current The switch port name. | ||||
| CagPortNewCfgLinkTrap | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.18 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise.
| ||||
| CagPortNewCfgTagPVID | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.19 | INTEGER | RW | |
column · INTEGER · read-write · current This is PVID tag state of the port
| ||||
| CagPortNewCfgMulticastThreshold | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.20 | INTEGER | RW | |
column · INTEGER · read-write · current New status of the port's Multicast Threshold.
| ||||
| CagPortNewCfgMulticastThresholdRate | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.21 | INTEGER (0..262143) | RW | |
column · INTEGER (0..262143) · read-write · current New port's Multicast Threshold Rate. | ||||
| CagPortNewCfgBroadcastThreshold | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.22 | INTEGER | RW | |
column · INTEGER · read-write · current New status of the port's Broadcast Threshold.
| ||||
| CagPortNewCfgBroadcastThresholdRate | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.23 | INTEGER (0..262143) | RW | |
column · INTEGER (0..262143) · read-write · current New port's Broadcast Threshold Rate. | ||||
| CagPortNewCfgDLFThreshold | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.24 | INTEGER | RW | |
column · INTEGER · read-write · current New status of the port's Destination Lookup Fail Threshold.
| ||||
| CagPortNewCfgDLFThresholdRate | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.25 | INTEGER (0..262143) | RW | |
column · INTEGER (0..262143) · read-write · current New port's Destination Lookup Fail Threshold Rate. | ||||
| TagPortFiberNewCfgTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2 | NA | ||
table · not-accessible · current The table of fiber port configuration in the new_configuration block. | ||||
| RagPortFiberNewCfgTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2.1 | NA | ||
row · not-accessible · current A row in the fiber port table in the new_configuration block. | ||||
| CagPortFiberNewCfgIndx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the row in fiber port new configuration table. | ||||
| CagPortFiberNewCfgTxCtrl | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current New TX control.
| ||||
| CagPortFiberNewCfgTxPulse | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current New TX pulse.
| ||||
| CagPortFiberNewCfgTxUp | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2.1.4 | INTEGER (1..10) | RW | |
column · INTEGER (1..10) · read-write · current New TX up time. | ||||
| CagPortFiberNewCfgTxDn | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2.1.5 | INTEGER (1..10) | RW | |
column · INTEGER (1..10) · read-write · current New TX dn time. | ||||
| NagRadiusConfig | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3 | |||
| SradCurCfgPrimaryIpAddr | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.1 | IpAddress | RO | |
scalar · IpAddress · read-only · current The IP address of the Primary RADIUS server. | ||||
| SradNewCfgPrimaryIpAddr | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.2 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP address of the Primary RADIUS server. | ||||
| SradCurCfgSecondaryIpAddr | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.3 | IpAddress | RO | |
scalar · IpAddress · read-only · current The IP address of the Secondary RADIUS server. | ||||
| SradNewCfgSecondaryIpAddr | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.4 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP address of the Secondary RADIUS server. | ||||
| SradCurCfgPort | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.5 | INTEGER (1500..3000) | RO | |
scalar · INTEGER (1500..3000) · read-only · current Specify the RADIUS port number. | ||||
| SradNewCfgPort | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.6 | INTEGER (1500..3000) | RW | |
scalar · INTEGER (1500..3000) · read-write · current Speicfy the RADIUS port number. | ||||
| SradCurCfgTimeout | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.7 | INTEGER (1..10) | RO | |
scalar · INTEGER (1..10) · read-only · current The maximum number of seconds before resending authentication to RADIUS server. | ||||
| SradNewCfgTimeout | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.8 | INTEGER (1..10) | RW | |
scalar · INTEGER (1..10) · read-write · current The maximum number of seconds before resending authentication to RADIUS server. | ||||
| SradCurCfgRetries | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.9 | INTEGER (1..3) | RO | |
scalar · INTEGER (1..3) · read-only · current Number of retries to the RADIUS server. | ||||
| SradNewCfgRetries | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.10 | INTEGER (1..3) | RW | |
scalar · INTEGER (1..3) · read-write · current Number of retries to the RADIUS server. | ||||
| SradCurCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.11 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disbale RADIUS authentication.
| ||||
| SradNewCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable RADIUS authentication.
| ||||
| SradCurCfgAuthenString | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.13 | DisplayString (SIZE (0..128)) | RO | |
scalar · DisplayString (SIZE (0..128)) · read-only · current The RADIUS authentication string. | ||||
| SradNewCfgAuthenString | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.14 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current The RADIUS authentication string. | ||||
| SradCurCfgTelnet | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.15 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disbale RADIUS backdoor for telnet.
| ||||
| SradNewCfgTelnet | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.16 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable RADIUS backdoor for telnet.
| ||||
| SradCurCfgAuthenSecondString | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.17 | DisplayString (SIZE (0..128)) | RO | |
scalar · DisplayString (SIZE (0..128)) · read-only · current The second RADIUS authentication string. | ||||
| SradNewCfgAuthenSecondString | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.18 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current The second RADIUS authentication string. | ||||
| SradCurCfgSecBd | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.19 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disbale RADIUS secure backdoor for telnet.
| ||||
| SradNewCfgSecBd | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.20 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable RADIUS secure backdoor for telnet.
| ||||
| NagNTP | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4 | |||
| SagCurCfgNTPServer | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.1 | IpAddress | RO | |
scalar · IpAddress · read-only · current The NTP Server Address. | ||||
| SagNewCfgNTPServer | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.2 | IpAddress | RW | |
scalar · IpAddress · read-write · current The NTP Server Address. | ||||
| SagCurCfgNTPResyncInterval | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.3 | INTEGER (1..44640) | RO | |
scalar · INTEGER (1..44640) · read-only · current The NTP Server resync interval in minutes. | ||||
| SagNewCfgNTPResyncInterval | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.4 | INTEGER (1..44640) | RW | |
scalar · INTEGER (1..44640) · read-write · current The NTP Server resync interval in minutes. | ||||
| SagCurCfgNTPTzoneHHMM | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.5 | DisplayString (SIZE (0..6)) | RO | |
scalar · DisplayString (SIZE (0..6)) · read-only · current The NTP Server timezone offset from GMT formatted as (+/-)HH:MM. | ||||
| SagNewCfgNTPTzoneHHMM | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.6 | DisplayString (SIZE (0..6)) | RW | |
scalar · DisplayString (SIZE (0..6)) · read-write · current The NTP Server timezone offset from GMT formatted as (+/-)HH:MM. The valid range is from -12:59 to +12:59. | ||||
| SagCurCfgNTPDlight | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable/disable daylight savings time.
| ||||
| SagNewCfgNTPDlight | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/disable daylight savings time.
| ||||
| SagCurCfgNTPService | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.9 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable/disable NTP Service.
| ||||
| SagNewCfgNTPService | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/disable NTP Service.
| ||||
| SagCurCfgNTPSecServer | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.11 | IpAddress | RO | |
scalar · IpAddress · read-only · current The Secondary NTP Server Address. | ||||
| SagNewCfgNTPSecServer | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.12 | IpAddress | RW | |
scalar · IpAddress · read-write · current The Secondary NTP Server Address. | ||||
| NagSyslog | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5 | |||
| SagCurCfgSyslogHost | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.1 | IpAddress | RO | |
scalar · IpAddress · read-only · current The syslog host IP address, as currently configured in the current_configuration block. | ||||
| SagNewCfgSyslogHost | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.2 | IpAddress | RW | |
scalar · IpAddress · read-write · current The syslog host IP address, in the new_configuration block. | ||||
| SagCurCfgSyslog2Host | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.3 | IpAddress | RO | |
scalar · IpAddress · read-only · current The second syslog host IP address, as currently configured in the current_configuration block. | ||||
| SagNewCfgSyslog2Host | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.4 | IpAddress | RW | |
scalar · IpAddress · read-write · current The second syslog host IP address, in the new_configuration block. | ||||
| SagCurCfgSyslogFac | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current The facility of syslog host in the current_configuration block.
| ||||
| SagNewCfgSyslogFac | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current The facility of syslog host in the new_configuration block.
| ||||
| SagCurCfgSyslog2Fac | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current The facility of syslog2 host in the current_configuration block.
| ||||
| SagNewCfgSyslog2Fac | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current The facility of syslogs host in the new_configuration block.
| ||||
| SagClrSyslogMsgs | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current Clears all current Syslog messages.
| ||||
| SagSyslogMsgTableMaxSize | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.10 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the syslog message table. | ||||
| TagSyslogMsgTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.11 | NA | ||
table · not-accessible · current The table of syslog messages. | ||||
| RagSyslogMsgTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.11.1 | NA | ||
| CagSyslogMsgIndex | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.11.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The syslog message table index. | ||||
| CagSyslogMessage | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.11.1.2 | DisplayString (SIZE (0..128)) | RO | |
column · DisplayString (SIZE (0..128)) · read-only · current The syslog message. | ||||
| NagLog | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12 | |||
| SagNewCfgSyslogTrapConsole | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable console syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapConsole | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable console syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapSystem | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable system level syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapSystem | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable system level syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapMgmt | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable management(flash, config, login) syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapMgmt | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.6 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable management(flash, config, login) syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapCli | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable CLI generated error syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapCli | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.8 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable CLI generated error syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapStg | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable spanning tree syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapStg | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.10 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable spanning tree syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapVlan | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.11 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable VLAN syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapVlan | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.12 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable VLAN syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapSsh | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.19 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable SSH, RADIUS syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapSsh | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.20 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable SSH, RADIUS syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapVrrp | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.21 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable VRRP syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapVrrp | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.22 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable VRRP syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapNtp | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.25 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable NTP syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapNtp | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.26 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable NTP syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapIp | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.31 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable IP related syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapIp | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.32 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable IP related syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapWeb | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.35 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable WEBUI related syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapWeb | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.36 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable WEBUI related syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapOspf | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.41 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable OSPF related syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapOspf | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.42 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable OSPF related syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapRmon | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.45 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable rmon related syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapRmon | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.46 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable rmon related syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapUfd | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.47 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable UFD related syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapUfd | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.48 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable UFD related syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapCfg | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.49 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable CFG related syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapCfg | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.50 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable CFG related syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrap8021x | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.51 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable 802.1X protocol related syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrap8021x | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.52 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable 802.1X protocol related syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapHotlinks | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.53 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable Hot Links related syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapHotlinks | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.54 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disable Hot Links related syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagCurCfgSyslogSev | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.13 | INTEGER | RO | |
scalar · INTEGER · read-only · current The severity of syslog host in the current configuration block.
| ||||
| SagNewCfgSyslogSev | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.14 | INTEGER | RW | |
scalar · INTEGER · read-write · current The severity of syslog host in the new configuration block.
| ||||
| SagCurCfgSyslog2Sev | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.15 | INTEGER | RO | |
scalar · INTEGER · read-only · current The severity of syslog2 host in the current configuration block.
| ||||
| SagNewCfgSyslog2Sev | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.16 | INTEGER | RW | |
scalar · INTEGER · read-write · current The severity of syslogs host in the new configuration block.
| ||||
| NagTrapHost | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6 | |||
| SagTrapHostTableMaxEnt | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of rows in the trap host table. | ||||
| TagCurCfgTrapHostTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.2 | NA | ||
table · not-accessible · current The table of trap hosts which to send SNMP traps in the current_configuration block. | ||||
| RagCurCfgTrapHostEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.2.1 | NA | ||
row · not-accessible · current A row in the trap host table in the current_configuration block.
| ||||
| CagCurCfgTrapHostIndx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the row in trap host table. | ||||
| CagCurCfgTrapHostIpAddr | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.2.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address of a trap host. | ||||
| CagCurCfgTrapHostCommString | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.2.1.3 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current The SNMP community string to use with the trap host | ||||
| TagNewCfgTrapHostTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.3 | NA | ||
table · not-accessible · current The table of trap hosts which to send SNMP traps in the new_configuration block. | ||||
| RagNewCfgTrapHostEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.3.1 | NA | ||
row · not-accessible · current A row in the trap host table in the new_configuration block.
| ||||
| CagNewCfgTrapHostIndx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the row in trap host table. | ||||
| CagNewCfgTrapHostIpAddr | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.3.1.2 | IpAddress | RW | |
column · IpAddress · read-write · current The IP address of a trap host. | ||||
| CagNewCfgTrapHostCommString | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.3.1.3 | DisplayString (SIZE (0..32)) | RW | |
column · DisplayString (SIZE (0..32)) · read-write · current The SNMP community string to use with the trap host | ||||
| NagTftp | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7 | |||
| SagTftpServer | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.1 | DisplayString (SIZE (0..64)) | RW | |
scalar · DisplayString (SIZE (0..64)) · read-write · current The TFTP server IP address or domain name. | ||||
| SagTftpImage | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Whether the image file should be loaded in image1 or image2 or boot in flash.
| ||||
| SagTftpImageFileName | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.3 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current The image file name to be downloaded. | ||||
| SagTftpCfgFileName | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.4 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current The configuration file name. | ||||
| SagTftpDumpFileName | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.5 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current The file name for core dump. | ||||
| SagTftpAction | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is an action object to perform various TFTP Get or Put functions.
The TFTP sever is specified in agTftpServer object.
img-get(2) - Download switch image from a specified image
file (agTftpImageFileName) on the TFTP server to
the destinated storage (agTftpImage).
cfg-get(3) - Download switch configuration from a specified
file (agTftpCfgFileName) on the TFTP server.
cfg-put(4) - Upload switch configuration to a specified
file (agTftpCfgFileName) on the TFTP server.
dump-put(5)- Download switch core dump to a specified
file (agTftpDumpFileName) on the TFTP server.
img-put(7) - Upload specified switch image to a specified image
file (agTftpImageFileName) on the TFTP server.
tsdump-put(5)- Download switch core dump to a specified
file (agTftpTSDumpFileName) on the TFTP server.
other(1) is returned always when read.
| ||||
| SagTftpLastActionStatus | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.7 | DisplayString (SIZE (0..128)) | RO | |
scalar · DisplayString (SIZE (0..128)) · read-only · current The recorded status of the previous TFTP activity. | ||||
| SagTftpUserName | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.9 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current The username for FTP server or blank for TFTP server. | ||||
| SagTftpPassword | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.10 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current The password for FTP server. | ||||
| SagTftpTSDumpFileName | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.11 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current The file name for TS dump. | ||||
| NagApply | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8 | |||
| SagApplyPending | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current This object, when read, gives the user information whether an apply action is needed and that the configuration has been chaged by the user actions. The user then can apply the changes by setting proper value to the object agApplyConfiguration described above.
| ||||
| SagApplyConfig | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current When this object is read the current state is returned.
idle(3) indicates that there is no apply in progess.
complete(5) indicates that the last apply operation is completed.
Setting the value to apply(1), will write all the changes made
since the last apply to the current configuration block.
If the apply is successful this variable will return the state
'complete' else it will return 'failed'. In case of failure,
to read the reason for failure use the agApplyTable.
| ||||
| SagApplyTableSize | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8.4 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of strings in the apply table. | ||||
| TagApplyTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8.5 | NA | ||
table · not-accessible · current The table of URL path for URL load balancing in the current_config. | ||||
| RagApplyTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8.5.1 | NA | ||
row · not-accessible · current Information about an URL path for URL load balancing.
| ||||
| CagApplyIndex | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8.5.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The table index. | ||||
| CagApplyString | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8.5.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current A string in the apply table. | ||||
| NagTacacsConfig | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10 | |||
| StacCurCfgPrimaryIpAddr | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.1 | IpAddress | RO | |
scalar · IpAddress · read-only · current The IP address of the Primary TACACS+ server. | ||||
| StacNewCfgPrimaryIpAddr | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.2 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP address of the Primary TACACS+ server. | ||||
| StacCurCfgSecondaryIpAddr | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.3 | IpAddress | RO | |
scalar · IpAddress · read-only · current The IP address of the Secondary TACSACS server. | ||||
| StacNewCfgSecondaryIpAddr | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.4 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP address of the Secondary TACACS+ server. | ||||
| StacCurCfgPort | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.5 | INTEGER (1..65000) | RO | |
scalar · INTEGER (1..65000) · read-only · current Specify the TACACS+ port number. | ||||
| StacNewCfgPort | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.6 | INTEGER (1..65000) | RW | |
scalar · INTEGER (1..65000) · read-write · current Specify the TACACS+ port number. | ||||
| StacCurCfgTimeout | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.7 | INTEGER (4..15) | RO | |
scalar · INTEGER (4..15) · read-only · current The maximum number of seconds before resending authentication to TACACS+ server. | ||||
| StacNewCfgTimeout | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.8 | INTEGER (4..15) | RW | |
scalar · INTEGER (4..15) · read-write · current The maximum number of seconds before resending authentication to TACACS+ server. | ||||
| StacCurCfgRetries | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.9 | INTEGER (1..3) | RO | |
scalar · INTEGER (1..3) · read-only · current Number of retries to the TACACS+ server. | ||||
| StacNewCfgRetries | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.10 | INTEGER (1..3) | RW | |
scalar · INTEGER (1..3) · read-write · current Number of retries to the TACACS+ server. | ||||
| StacCurCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.11 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disbale TACACS+ authentication.
| ||||
| StacNewCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable TACACS+ authentication.
| ||||
| StacCurCfgAuthenString | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.13 | DisplayString (SIZE (0..128)) | RO | |
scalar · DisplayString (SIZE (0..128)) · read-only · current The TACACS+ authentication string. | ||||
| StacNewCfgAuthenString | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.14 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current The TACACS+ authentication string. | ||||
| StacCurCfgTelnet | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.15 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disbale TACACS+ backdoor for telnet.
| ||||
| StacNewCfgTelnet | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.16 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable TACACS+ backdoor for telnet.
| ||||
| StacCurCfgAuthenSecondString | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.17 | DisplayString (SIZE (0..128)) | RO | |
scalar · DisplayString (SIZE (0..128)) · read-only · current The second TACACS+ authentication string. | ||||
| StacNewCfgAuthenSecondString | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.18 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current The second TACACS+ authentication string. | ||||
| StacCurCfgSecBd | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.23 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable or disbale TACACS+ secure backdoor for telnet.
| ||||
| StacNewCfgSecBd | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.24 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable TACACS+ secure backdoor for telnet.
| ||||
| StacCurCfgCmap | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.25 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enable/Disable Tacacs+ new prividlege level maping.
| ||||
| StacNewCfgCmap | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.26 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/Disable Tacacs+ new prividlege level maping.
| ||||
| TagTacacsUserMapCurCfgTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.31 | NA | ||
table · not-accessible · current The table of tacacs+ user map current configuration. | ||||
| RagTacacsUserMapCurCfgTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.31.1 | NA | ||
| CagTacacsUserMapCurCfgUId | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.31.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The current config remote privilege identifier. | ||||
| CagTacacsUserMapCurCfgMapping | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.31.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Current Tacacs+ user privilege mappings.
| ||||
| TagTacacsUserMapNewCfgTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.32 | NA | ||
table · not-accessible · current The table of tacacs+ user map new configuration. | ||||
| RagTacacsUserMapNewCfgTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.32.1 | NA | ||
| CagTacacsUserMapNewCfgUId | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.32.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The new config remote privilege identifier. | ||||
| CagTacacsUserMapNewCfgMapping | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.32.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current Set new Tacacs+ user privilege mappings.
| ||||
| NagMgmtNetConfig | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11 | |||
| SagMgmtNetTableMaxSize | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of entries in the Management Network Table. | ||||
| TagCurCfgMgmtNetTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.2 | NA | ||
table · not-accessible · current The table for Management Network definitions in the current configuration block. | ||||
| RagCurCfgMgmtNetEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.2.1 | NA | ||
row · not-accessible · current A row in the management network definition table.
| ||||
| CagCurCfgMgmtNetIndex | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the Management Network Definition table. | ||||
| CagCurCfgMgmtNetSubnet | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.2.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The Management Network Address in the current_configuration block. | ||||
| CagCurCfgMgmtNetMask | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.2.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The Management Network Mask in the current_configuration block. | ||||
| TagNewCfgMgmtNetTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.3 | NA | ||
table · not-accessible · current The table for Management Network definitions in the new configuration block. | ||||
| RagNewCfgMgmtNetEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.3.1 | NA | ||
row · not-accessible · current A row in the management network definition table.
| ||||
| CagNewCfgMgmtNetIndex | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the Management Network Definition table. | ||||
| CagNewCfgMgmtNetSubnet | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.3.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The Management Network Address in the new_configuration block. | ||||
| CagNewCfgMgmtNetMask | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.3.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current The Management Network Mask in the new_configuration block. | ||||
| CagNewCfgMgmtNetDelete | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.3.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current By setting the value to delete(2), the entire row is deleted.
| ||||
| NagAccess | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12 | |||
| SagAccessUserMaxUserID | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of Users ID. | ||||
| TagAccessUserCurCfgTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2 | NA | ||
table · not-accessible · current The table of Access user configuration. | ||||
| RagAccessUserCurCfgTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2.1 | NA | ||
row · not-accessible · current A row in the Access user configuration table. | ||||
| CagAccessUserCurCfgUId | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The User identifier. | ||||
| CagAccessUserCurCos | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The user class of service.
| ||||
| CagAccessUserCurCfgName | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2.1.3 | DisplayString (SIZE (0..8)) | RO | |
column · DisplayString (SIZE (0..8)) · read-only · current The user name. | ||||
| CagAccessUserCurCfgPswd | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2.1.4 | DisplayString (SIZE (0..128)) | RO | |
column · DisplayString (SIZE (0..128)) · read-only · current The character string representing the user passworde. | ||||
| CagAccessUserCurCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Enable or disable a user.
| ||||
| TagAccessUserNewCfgTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3 | NA | ||
table · not-accessible · current The table of Access user configuration. | ||||
| RagAccessUserNewCfgTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1 | NA | ||
row · not-accessible · current A row in the Access user configuration table. | ||||
| CagAccessUserNewCfgUId | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The User identifier. | ||||
| CagAccessUserNewCos | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current The user class of service.
| ||||
| CagAccessUserNewCfgName | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1.3 | DisplayString (SIZE (0..8)) | RC | |
column · DisplayString (SIZE (0..8)) · read-create · current The user name. | ||||
| CagAccessUserNewCfgPswd | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1.4 | DisplayString (SIZE (0..128)) | RC | |
column · DisplayString (SIZE (0..128)) · read-create · current The character string representing the user passworde. | ||||
| CagAccessUserNewCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable a user.
| ||||
| CagAccessUserNewCfgDelete | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current This is an action object to create or delete a User. other(1) is returned always when read. The following values are writable: delete(2)...to delete a User
| ||||
| NagentStats | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2 | |||
| NpktStats | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1 | |||
| SpktStatsAllocs | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total number of packet allocations from the packet buffer pool by the TCP/IP protocol stack. | ||||
| SpktStatsFrees | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total number of times the packet buffers are freed(released) to the packet buffer pool by the TCP/IP protocol stack. | ||||
| SpktStatsAllocFails | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total number of packet allocation failures from the packet buffer pool by the TCP/IP protocol stack. | ||||
| SpktStatsMediums | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.4 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current Total number of packet allocations with size greater than 128 bytes and less than or equal to 1536 bytes from the packet buffer pool by the TCP/IP protocol stack. | ||||
| SpktStatsJumbos | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.5 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current Total number of packet allocations with size larger than 1536 bytes from the packet buffer pool by the TCP/IP protocol stack. | ||||
| SpktStatsSmalls | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.6 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current Total number of packet allocations with size less than or eqaul to 128 bytes from the packet buffer pool by the TCP/IP protocol stack. | ||||
| SpktStatsMediumsHiWatermark | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.7 | Counter32 | RO | |
scalar · Counter32 · read-only · current The highest number of packet allocations with size greater than 128 bytes and less than or equal to 1536 bytes from the packet buffer pool by the TCP/IP protocol stack. | ||||
| SpktStatsJumbosHiWatermark | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.8 | Counter32 | RO | |
scalar · Counter32 · read-only · current The highest number of packet allocations with size larger than 1536 bytes from the packet buffer pool by the TCP/IP protocol stack. | ||||
| SpktStatsSmallsHiWatermark | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.9 | Counter32 | RO | |
scalar · Counter32 · read-only · current The highest number of packet allocations with size less than or eqaul to 128 bytes from the packet buffer pool by the TCP/IP protocol stack. | ||||
| NmpCpuStats | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.2 | |||
| SmpCpuStatsUtil1Second | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.2.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The utilization of MP CPU over 1 second. It shows the percentage. | ||||
| SmpCpuStatsUtil4Seconds | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.2.2 | Integer32 | RO | |
scalar · Integer32 · read-only · current The utilization of MP CPU over 4 seconds. It shows the percentage. | ||||
| SmpCpuStatsUtil64Seconds | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.2.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current The utilization of MP CPU over 64 seconds. It shows the percentage. | ||||
| NportStats | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3 | |||
| TportStatsTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1 | NA | ||
table · not-accessible · current The table of port statistics. | ||||
| RportStatsTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1 | NA | ||
| CportStatsIndx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The port index. | ||||
| CportStatsPhyIfInOctets | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of octets received on the interface, including framing characters. | ||||
| CportStatsPhyIfInUcastPkts | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The number of subnetwork-unicast packets delivered to a higher-layer protocol. | ||||
| CportStatsPhyIfInNUcastPkts | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. | ||||
| CportStatsPhyIfInDiscards | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. | ||||
| CportStatsPhyIfInErrors | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. | ||||
| CportStatsPhyIfInUnknownProtos | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets received via the interface which were discarded because of an unknown or unsupported protocol. | ||||
| CportStatsPhyIfOutOctets | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of octets transmitted out of the interface, including framing characters. | ||||
| CportStatsPhyIfOutUcastPkts | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent. | ||||
| CportStatsPhyIfOutNUcastPkts | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent. | ||||
| CportStatsPhyIfOutDiscards | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. | ||||
| CportStatsPhyIfOutErrors | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current The number of outbound packets that could not be transmitted because of errors. | ||||
| CportStatsPhyIfOutQLen | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.13 | Gauge32 | RO | |
column · Gauge32 · read-only · current The length of the output packet queue (in packets). | ||||
| CportStatsPhyIfInBroadcastPkts | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.14 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. | ||||
| CportStatsPhyIfOutBroadcastPkts | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. | ||||
| CportStatsClear | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.16 | INTEGER | RW | |
column · INTEGER · read-write · current Setting this value to clear(1) clears the stats for this port.
| ||||
| CportStatsPhyIfInMulticastPkts | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.17 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. | ||||
| CportStatsPhyIfOutMulticastPkts | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.18 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. | ||||
| Tdot1xPortStatsTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2 | NA | ||
table · not-accessible · current The table of 802.1x port statistics. | ||||
| Rdot1xPortStatsTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1 | NA | ||
| Cdot1xPortStatsIndx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The 802.1x port stats index. | ||||
| CeapolFramesRx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.2 | Integer32 | RO | |
| CeapolFramesTx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.3 | Integer32 | RO | |
| CeapolStartFramesRx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.4 | Integer32 | RO | |
| CeapolLogoffFramesRx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.5 | Integer32 | RO | |
| CeapolRespIdFramesRx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.6 | Integer32 | RO | |
| CeapolRespFramesRx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.7 | Integer32 | RO | |
| CeapolReqIdFramesTx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.8 | Integer32 | RO | |
| CeapolReqFramesTx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.9 | Integer32 | RO | |
| CinvalidEapolFramesRx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.10 | Integer32 | RO | |
| CeapLengthErrorFramesRx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.11 | Integer32 | RO | |
| CauthEntersConnecting | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.12 | Integer32 | RO | |
| CauthEapLogoffsWhileConnecting | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.13 | Integer32 | RO | |
| CauthEntersAuthenticating | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.14 | Integer32 | RO | |
| CauthSuccessesWhileAuthenticating | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.15 | Integer32 | RO | |
| CauthTimeoutsWhileAuthenticating | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.16 | Integer32 | RO | |
| CauthFailWhileAuthenticating | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.17 | Integer32 | RO | |
| CauthReauthsWhileAuthenticating | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.18 | Integer32 | RO | |
| CauthEapStartsWhileAuthenticating | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.19 | Integer32 | RO | |
| CauthEapLogoffWhileAuthenticating | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.20 | Integer32 | RO | |
| CauthReauthsWhileAuthenticated | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.21 | Integer32 | RO | |
| CauthEapStartsWhileAuthenticated | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.22 | Integer32 | RO | |
| CauthEapLogoffWhileAuthenticated | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.23 | Integer32 | RO | |
| CbackendResponses | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.24 | Integer32 | RO | |
| CbackendAccessChallenges | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.25 | Integer32 | RO | |
| CbackendOtherRequestsToSupplicant | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.26 | Integer32 | RO | |
| CbackendNonNakResponsesFromSupplicant | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.27 | Integer32 | RO | |
| CbackendAuthSuccesses | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.28 | Integer32 | RO | |
| CbackendAuthFails | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.29 | Integer32 | RO | |
| ClastEapolFrameVersion | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.30 | Integer32 | RO | |
| ClastEapolFrameSource | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.31 | MacAddress | RO | |
| NspStats | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.4 | |||
| NmgmtStats | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.5 | |||
| NntpStats | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9 | |||
| SntpPrimaryServerReqSent | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The total number of NTP requests sent to Primary NTP Server. | ||||
| SntpPrimaryServerRespRcvd | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.2 | Integer32 | RO | |
scalar · Integer32 · read-only · current The total number of NTP responces received from Primary NTP Server. | ||||
| SntpPrimaryServerUpdates | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current The total number of NTP Updates by Primary NTP Server. | ||||
| SntpSecondaryServerReqSent | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.4 | Integer32 | RO | |
scalar · Integer32 · read-only · current The total number of NTP requests sent to Secondary NTP Server. | ||||
| SntpSecondaryServerRespRcvd | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.5 | Integer32 | RO | |
scalar · Integer32 · read-only · current The total number of NTP responces received from Secondary NTP Server. | ||||
| SntpSecondaryServerUpdates | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.6 | Integer32 | RO | |
scalar · Integer32 · read-only · current The total number of NTP Updates by Secondary NTP Server. | ||||
| SntpLastUpdateServer | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current The type of ntp server updated last time.
| ||||
| SntpLastUpdateTime | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.8 | DisplayString (SIZE (0..127)) | RO | |
scalar · DisplayString (SIZE (0..127)) · read-only · current The last time updated by ntp server. | ||||
| SntpClearStats | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this value to clear(2) clears the stats for ntp.
| ||||
| SntpSystemCurrentTime | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.10 | DisplayString (SIZE (0..127)) | RO | |
scalar · DisplayString (SIZE (0..127)) · read-only · current The current system time. | ||||
| NaclPortStats | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.10 | |||
| TaclPortStatsTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.10.1 | NA | ||
table · not-accessible · current The table of aclPort statistics. | ||||
| RaclPortStatsTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.10.1.1 | NA | ||
| CaclPortStatsIndx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.10.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The aclPort index. | ||||
| CaclPortStatsHits | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.10.1.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current Total number of hits for this ACL entry on given port | ||||
| CaclPortClearStats | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.10.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Setting this value to clear(2) clears the stats for the ACL.
| ||||
| NaclMeterPortStats | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.11 | |||
| TaclMeterPortStatsTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.11.1 | NA | ||
table · not-accessible · current The table of aclMeterPort statistics. | ||||
| RaclMeterPortStatsTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.11.1.1 | NA | ||
| CaclMeterPortStatsIndx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.11.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The aclMeterPort index. | ||||
| CaclMeterPortStatsHits | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.11.1.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current Total number of hits for this ACL Meter entry on given port | ||||
| CaclMeterPortClearStats | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.11.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Setting this value to clear(2) clears the stats for the ACL meter.
| ||||
| NagentInfo | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3 | |||
| Nhardware | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.1 | |||
| ShwPartNumber | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.1.1 | DisplayString (SIZE (0..16)) | RO | |
scalar · DisplayString (SIZE (0..16)) · read-only · current The hardware part number of the Bladetype2 Switch. | ||||
| ShwRevision | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.1.2 | DisplayString (SIZE (0..16)) | RO | |
scalar · DisplayString (SIZE (0..16)) · read-only · current The hardware revision. If the revision is not available, a zero length string should be returned. | ||||
| ShwPowerSupplyStatus | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.1.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current The status of the internal power supply.
| ||||
| ShwSensor1Temp | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.1.4 | Integer32 | RO | |
scalar · Integer32 · read-only · current The temperature of the rear left sensor in degrees Celsius. | ||||
| ShwInsertedCubeType | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.1.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current The inserted cube type.
| ||||
| NportInfo | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2 | |||
| TportInfoTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1 | NA | ||
table · not-accessible · current The table of port information. | ||||
| RportInfoTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1 | NA | ||
| CportInfoIndx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The port index. | ||||
| CportInfoSpeed | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The current operational speed of the port.
| ||||
| CportInfoMode | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The current operational mode of the port.
| ||||
| CportInfoFlowCtrl | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The current operational flow control of the port.
| ||||
| CportInfoLink | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The current operational link status of the port.
| ||||
| CportInfoPhyIfDescr | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.6 | DisplayString (SIZE (0..255)) | RO | |
column · DisplayString (SIZE (0..255)) · read-only · current A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the hardware interface. | ||||
| CportInfoPhyIfType | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack.
| ||||
| CportInfoPhyIfMtu | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface. | ||||
| CportInfoPhyIfPhysAddress | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.9 | PhysAddress | RO | |
column · PhysAddress · read-only · current The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length. | ||||
| CportInfoPhyIfOperStatus | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed.
| ||||
| CportInfoPhyIfLastChange | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.11 | TimeTicks | RO | |
column · TimeTicks · read-only · current The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization of the local network management subsystem, then this object contains a zero value. | ||||
| NswKeyInfo | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.3 | |||
| NagDiff | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.4 | |||
| SagDiffState | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.4.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current When this object is read the current state is returned. idle(3) indicates that there is no diff in progess. complete(5) indicates that the last diff operation is completed. Setting the value to diff(1), will start a new diff operation Diff compares the new configuration with the current configuration and shows the pending configuration changes. Setting the value to flashdiff(1), will start a new diff operation. flashdiff compares new configuration with the flash configuration. To read the configuration changes use the agDiffTable once the state of this variable returns complete.
| ||||
| SagDiffTableSize | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.4.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of strings in the diff table. | ||||
| TagDiffTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.4.4 | NA | ||
table · not-accessible · current The table of URL path for URL load balancing in the current_config. | ||||
| RagDiffTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.4.4.1 | NA | ||
| CagDiffIndex | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.4.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The table index. | ||||
| CagDiffString | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.4.4.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current A string in the diff table. | ||||
| NagCfgDump | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.5 | |||
| SagCfgDumpState | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.5.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current When this object is read the current state is returned. idle(2) indicates that there is no dump in progess. complete(4) indicates that the last dump operation is completed. Setting the value to dump(1), will start a new dump operation Dump will show the current configuration. To read the configuration dump use the agCfgDumpTable once the state of this variable returns complete. Once the agCfgDumpTable is read the state should be set back to 'idle' which frees the dump buffer and others can issue a dump command via SNMP.
| ||||
| SagCfgDumpTableSize | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.5.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of strings in the dump table. | ||||
| TagCfgDumpTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.5.4 | NA | ||
table · not-accessible · current The table of dump strings. | ||||
| RagCfgDumpTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.5.4.1 | NA | ||
| CagCfgDumpIndex | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.5.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The table index. | ||||
| CagCfgDumpString | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.5.4.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current A string in the dump table. | ||||
| NmgmtInfo | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.6 | |||
| NgeaportInfo | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.7 | |||
| TgeaportInfoTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.7.1 | NA | ||
table · not-accessible · current The table of gea port mapping. | ||||
| RgeaportInfoTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.7.1.1 | NA | ||
| CgeaportInfoLogicalIndex | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.7.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The logical port index. | ||||
| CgeaportInfoPort | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.7.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The GEA Port (0-based). | ||||
| CgeaportInfoUnit | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.7.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The GEA Unit. | ||||
| NufdInfo | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.8 | |||
| SufdInfoState | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.8.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Uplink Failure Detection State.
| ||||
| SufdInfoLtMStatus | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.8.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current LtM Status.
| ||||
| SufdInfoLtMPorts | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.8.3 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The LtM port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to LtM
0 - The represented port does not belong to LtM. | ||||
| SufdInfoLtMTrunks | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.8.4 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The LtM trunk list. The trunks are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to LtM
0 - The represented trunk does not belong to LtM. | ||||
| SufdInfoLtDStatus | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.8.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current LtD status.
| ||||
| SufdInfoLtDPorts | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.8.6 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The LtD port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to LtD
0 - The represented port does not belong to LtD. | ||||
| SufdInfoLtDTrunks | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.8.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current The LtD trunk list. The trunks are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to LtD
0 - The represented trunk does not belong to LtD. | ||||
| NagentOper | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4 | |||
| TagPortOperTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1 | NA | ||
table · not-accessible · current The table of port operations. | ||||
| RagPortOperTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.1 | NA | ||
| CportOperIdx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The port index. | ||||
| CportOperState | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/Disable port.
| ||||
| CportOperRmon | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/Disable RMON for port.
| ||||
| TportOperDot1xTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.2 | NA | ||
table · not-accessible · current The table of port operations. | ||||
| RportOperDot1xTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.2.1 | NA | ||
| CportOperDot1xIndx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The port index. | ||||
| CportOperDot1xReset | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.2.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Reinitialize 802.1x access control on port.
| ||||
| CportOperDot1xReauth | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Initiate reauthentication on port.
| ||||
| NagNTPOper | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.2 | |||
| SntpOperSendReq | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Allows the user to send requests to the NTP server.
| ||||