GUDEADS-EPC8001-MIB
Gude Analog- und Digitalsysteme GmbHExpert Power Control 8001 MIB
snmptranslate -m GUDEADS-EPC8001-MIB -Tpsnmpwalk -v2c -c <community> -m GUDEADS-EPC8001-MIB <host> 1.3.6.1.4.1.28507Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Igudeads | 1.3.6.1.4.1.28507 | |||
identity Expert Power Control 8001 MIB | ||||
| NgadsEPC8001 | 1.3.6.1.4.1.28507.100 | |||
| Nepc8001Objects | 1.3.6.1.4.1.28507.100.1 | |||
| Nepc8001CommonConfig | 1.3.6.1.4.1.28507.100.1.1 | |||
| Nepc8001SNMPaccess | 1.3.6.1.4.1.28507.100.1.1.1 | |||
| Sepc8001TrapCtrl | 1.3.6.1.4.1.28507.100.1.1.1.1 | Integer32 (0..3) | RW | |
scalar · Integer32 (0..3) · read-write · current 0 = off 1 = Ver. 1 2 = Ver. 2c 3 = Ver. 3 | ||||
| Tepc8001TrapIPTable | 1.3.6.1.4.1.28507.100.1.1.1.2 | NA | ||
table · not-accessible · current list of all Trap receiver | ||||
| Repc8001TrapIPEntry | 1.3.6.1.4.1.28507.100.1.1.1.2.1 | NA | ||
row · not-accessible · current an entry containing management informations regarding the list of trap receivers
| ||||
| Cepc8001TrapIPIndex | 1.3.6.1.4.1.28507.100.1.1.1.2.1.1 | Integer32 (1..8) | RO | |
column · Integer32 (1..8) · read-only · current A unique value, greater than zero, for each receiver slot. | ||||
| Cepc8001TrapAddr | 1.3.6.1.4.1.28507.100.1.1.1.2.1.2 | OCTET STRING (SIZE (0..99)) | RW | |
column · OCTET STRING (SIZE (0..99)) · read-write · current DNS name or IP address specifying one Trap receiver slot. A port can optionally be specified: 'name:port' An empty string disables this slot. | ||||
| Nepc8001DeviceInfo | 1.3.6.1.4.1.28507.100.1.1.2 | |||
| Sepc8001ProdName | 1.3.6.1.4.1.28507.100.1.1.2.1 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The Product Name of the device. | ||||
| Sepc8001FWVersion | 1.3.6.1.4.1.28507.100.1.1.2.2 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current Firmware Version of the device. | ||||
| Sepc8001HostName | 1.3.6.1.4.1.28507.100.1.1.2.3 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The configured Host Name. | ||||
| Sepc8001PhysAddress | 1.3.6.1.4.1.28507.100.1.1.2.4 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The MAC address of the device. | ||||
| Sepc8001SerialNumber | 1.3.6.1.4.1.28507.100.1.1.2.5 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current The Serial Number of the device. Not available for all devices. Production start 2026. | ||||
| Nepc8001DeviceConfig | 1.3.6.1.4.1.28507.100.1.2 | |||
| Nepc8001IntActors | 1.3.6.1.4.1.28507.100.1.3 | |||
| Nepc8001relayports | 1.3.6.1.4.1.28507.100.1.3.1 | |||
| Sepc8001portNumber | 1.3.6.1.4.1.28507.100.1.3.1.1 | Integer32 (1..8) | RO | |
scalar · Integer32 (1..8) · read-only · current The number of Relay Ports | ||||
| Tepc8001portTable | 1.3.6.1.4.1.28507.100.1.3.1.2 | NA | ||
table · not-accessible · current list of all EPC Relay Ports | ||||
| Repc8001portEntry | 1.3.6.1.4.1.28507.100.1.3.1.2.1 | NA | ||
row · not-accessible · current An entry containing management information applicable to a particular relay port.
| ||||
| Cepc8001PortIndex | 1.3.6.1.4.1.28507.100.1.3.1.2.1.1 | Integer32 (1..5) | RO | |
column · Integer32 (1..5) · read-only · current A unique value, greater than zero, for each Relay Port. | ||||
| Cepc8001PortName | 1.3.6.1.4.1.28507.100.1.3.1.2.1.2 | OCTET STRING (SIZE (0..15)) | RW | |
column · OCTET STRING (SIZE (0..15)) · read-write · current A textual string containing name of a Relay Port. | ||||
| Cepc8001PortState | 1.3.6.1.4.1.28507.100.1.3.1.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current current state of a Relay Port
| ||||
| Cepc8001PortSwitchCount | 1.3.6.1.4.1.28507.100.1.3.1.2.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The total number of switch actions ocurred on a Relay Port. Does not count switch commands which will not switch the ralay state, so just real relay switches are displayed here. | ||||
| Cepc8001PortStartupMode | 1.3.6.1.4.1.28507.100.1.3.1.2.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current set Mode of startup sequence (off, on , remember last state)
| ||||
| Cepc8001PortStartupDelay | 1.3.6.1.4.1.28507.100.1.3.1.2.1.6 | Integer32 | RW | |
column · Integer32 · read-write · current Delay in sec for startup action
| ||||
| Cepc8001PortRepowerTime | 1.3.6.1.4.1.28507.100.1.3.1.2.1.7 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current Delay in sec for repower port after switching off
| ||||
| Cepc8001PortResetDuration | 1.3.6.1.4.1.28507.100.1.3.1.2.1.8 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current Delay in sec for turning Port on again after Reset action
| ||||
| Sepc8001Buzzer | 1.3.6.1.4.1.28507.100.1.3.10 | Integer32 (0..1) | RW | |
scalar · Integer32 (0..1) · read-write · current turn Buzzer on and off
| ||||
| Nepc8001ExtActors | 1.3.6.1.4.1.28507.100.1.4 | |||
| Nepc8001IntSensors | 1.3.6.1.4.1.28507.100.1.5 | |||
| Nepc8001PowerChan | 1.3.6.1.4.1.28507.100.1.5.1 | |||
| Sepc8001ActivePowerChan | 1.3.6.1.4.1.28507.100.1.5.1.1 | Unsigned32 (1) | RO | |
scalar · Unsigned32 (1) · read-only · current Number of suppported Power Channels. | ||||
| Tepc8001PowerTable | 1.3.6.1.4.1.28507.100.1.5.1.2 | NA | ||
table · not-accessible · current All available Channel Interfaces. | ||||
| Repc8001PowerEntry | 1.3.6.1.4.1.28507.100.1.5.1.2.1 | NA | ||
row · not-accessible · current An entry containing management information applicable to a particular Power Channel.
| ||||
| Cepc8001PowerIndex | 1.3.6.1.4.1.28507.100.1.5.1.2.1.1 | Integer32 (1) | RO | |
column · Integer32 (1) · read-only · current Index of Power Channel entries | ||||
| Cepc8001ChanStatus | 1.3.6.1.4.1.28507.100.1.5.1.2.1.2 | Integer32 (0..1) | RO | |
column · Integer32 (0..1) · read-only · current 0 = data not active, 1 = data valid | ||||
| Cepc8001AbsEnergyActive | 1.3.6.1.4.1.28507.100.1.5.1.2.1.3 | Gauge32 | RO | |
column · Gauge32 · read-only · current Absolute Active Energy counter.
| ||||
| Cepc8001PowerActive | 1.3.6.1.4.1.28507.100.1.5.1.2.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current Active Power
| ||||
| Cepc8001Current | 1.3.6.1.4.1.28507.100.1.5.1.2.1.5 | Gauge32 | RO | |
column · Gauge32 · read-only · current Actual Curent on Power Channel.
| ||||
| Cepc8001Voltage | 1.3.6.1.4.1.28507.100.1.5.1.2.1.6 | Gauge32 | RO | |
column · Gauge32 · read-only · current Actual Voltage on Power Channel
| ||||
| Cepc8001Frequency | 1.3.6.1.4.1.28507.100.1.5.1.2.1.7 | Gauge32 | RO | |
column · Gauge32 · read-only · current Frequency of Power Channel
| ||||
| Cepc8001PowerFactor | 1.3.6.1.4.1.28507.100.1.5.1.2.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current Power Factor of Channel between -1.0 and 1.00
| ||||
| Cepc8001Pangle | 1.3.6.1.4.1.28507.100.1.5.1.2.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current Phase Angle between Voltage and L Line Current between -180.0 and 180.0
| ||||
| Cepc8001PowerApparent | 1.3.6.1.4.1.28507.100.1.5.1.2.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current L Line Mean Apparent Power
| ||||
| Cepc8001PowerReactive | 1.3.6.1.4.1.28507.100.1.5.1.2.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current L Line Mean Reactive Power
| ||||
| Cepc8001AbsEnergyReactive | 1.3.6.1.4.1.28507.100.1.5.1.2.1.12 | Gauge32 | RO | |
column · Gauge32 · read-only · current Absolute Reactive Energy counter.
| ||||
| Cepc8001AbsEnergyActiveResettable | 1.3.6.1.4.1.28507.100.1.5.1.2.1.13 | Gauge32 | RW | |
column · Gauge32 · read-write · current Resettable Absolute Active Energy counter. Writing '0' resets all resettable counter.
| ||||
| Cepc8001AbsEnergyReactiveResettable | 1.3.6.1.4.1.28507.100.1.5.1.2.1.14 | Gauge32 | RO | |
column · Gauge32 · read-only · current Resettable Absolute Reactive Energy counter.
| ||||
| Cepc8001ResetTime | 1.3.6.1.4.1.28507.100.1.5.1.2.1.15 | Gauge32 | RO | |
column · Gauge32 · read-only · current Time in seconds since last Energy Counter reset.
| ||||
| Cepc8001ForwEnergyActive | 1.3.6.1.4.1.28507.100.1.5.1.2.1.16 | Gauge32 | RO | |
column · Gauge32 · read-only · current Forward Active Energy counter.
| ||||
| Cepc8001ForwEnergyReactive | 1.3.6.1.4.1.28507.100.1.5.1.2.1.17 | Gauge32 | RO | |
column · Gauge32 · read-only · current Forward Reactive Energy counter.
| ||||
| Cepc8001ForwEnergyActiveResettable | 1.3.6.1.4.1.28507.100.1.5.1.2.1.18 | Gauge32 | RO | |
column · Gauge32 · read-only · current Resettable Forward Active Energy counter.
| ||||
| Cepc8001ForwEnergyReactiveResettable | 1.3.6.1.4.1.28507.100.1.5.1.2.1.19 | Gauge32 | RO | |
column · Gauge32 · read-only · current Resettable Forward Reactive Energy counter.
| ||||
| Cepc8001RevEnergyActive | 1.3.6.1.4.1.28507.100.1.5.1.2.1.20 | Gauge32 | RO | |
column · Gauge32 · read-only · current Reverse Active Energy counter.
| ||||
| Cepc8001RevEnergyReactive | 1.3.6.1.4.1.28507.100.1.5.1.2.1.21 | Gauge32 | RO | |
column · Gauge32 · read-only · current Reverse Reactive Energy counter.
| ||||
| Cepc8001RevEnergyActiveResettable | 1.3.6.1.4.1.28507.100.1.5.1.2.1.22 | Gauge32 | RO | |
column · Gauge32 · read-only · current Resettable Reverse Active Energy counter.
| ||||
| Cepc8001RevEnergyReactiveResettable | 1.3.6.1.4.1.28507.100.1.5.1.2.1.23 | Gauge32 | RO | |
column · Gauge32 · read-only · current Resettable Reverse Reactive Energy counter.
| ||||
| Cepc8001LineSensorName | 1.3.6.1.4.1.28507.100.1.5.1.2.1.100 | OCTET STRING (SIZE (0..32)) | RW | |
column · OCTET STRING (SIZE (0..32)) · read-write · current A textual string containing name of a Line Sensor | ||||
| Nepc8001SinglePortPowerChan | 1.3.6.1.4.1.28507.100.1.5.5 | |||
| Sepc8001spActivePowerChan | 1.3.6.1.4.1.28507.100.1.5.5.1 | Unsigned32 (1) | RO | |
scalar · Unsigned32 (1) · read-only · current Number of Single Port Power Channels. Value is zero on EPC 8220 series. | ||||
| Tepc8001spPowerTable | 1.3.6.1.4.1.28507.100.1.5.5.2 | NA | ||
table · not-accessible · current All available Single Port Power Channel Interfaces. Indices 0-5 mean Ports A1 to A6, 6-11 are Ports B1 to B6. This table may not be present on devices that have no measurement on every port. | ||||
| Repc8001spPowerEntry | 1.3.6.1.4.1.28507.100.1.5.5.2.1 | NA | ||
row · not-accessible · current An entry containing management information applicable to a particular Single Port Power Channel.
| ||||
| Cepc8001spPowerIndex | 1.3.6.1.4.1.28507.100.1.5.5.2.1.1 | Integer32 (1..8) | RO | |
column · Integer32 (1..8) · read-only · current Index of Single Port Power Channel entries. Indices 0-5 mean Ports A1 to A6, 6-11 are Ports B1 to B6. | ||||
| Cepc8001spChanStatus | 1.3.6.1.4.1.28507.100.1.5.5.2.1.2 | Integer32 (0..1) | RO | |
column · Integer32 (0..1) · read-only · current 0 = data not active, 1 = data valid | ||||
| Cepc8001spAbsEnergyActive | 1.3.6.1.4.1.28507.100.1.5.5.2.1.3 | Gauge32 | RO | |
column · Gauge32 · read-only · current Absolute Active Energy counter.
| ||||
| Cepc8001spPowerActive | 1.3.6.1.4.1.28507.100.1.5.5.2.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current Active Power
| ||||
| Cepc8001spCurrent | 1.3.6.1.4.1.28507.100.1.5.5.2.1.5 | Gauge32 | RO | |
column · Gauge32 · read-only · current Actual Curent on Power Channel.
| ||||
| Cepc8001spVoltage | 1.3.6.1.4.1.28507.100.1.5.5.2.1.6 | Gauge32 | RO | |
column · Gauge32 · read-only · current Actual Voltage on Power Channel
| ||||
| Cepc8001spFrequency | 1.3.6.1.4.1.28507.100.1.5.5.2.1.7 | Gauge32 | RO | |
column · Gauge32 · read-only · current Frequency of Power Channel
| ||||
| Cepc8001spPowerFactor | 1.3.6.1.4.1.28507.100.1.5.5.2.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current Power Factor of Channel between -1.0 and 1.00
| ||||
| Cepc8001spPangle | 1.3.6.1.4.1.28507.100.1.5.5.2.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current Phase Angle between Voltage and L Line Current between -180.0 and 180.0
| ||||
| Cepc8001spPowerApparent | 1.3.6.1.4.1.28507.100.1.5.5.2.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current L Line Mean Apparent Power
| ||||
| Cepc8001spPowerReactive | 1.3.6.1.4.1.28507.100.1.5.5.2.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current L Line Mean Reactive Power
| ||||
| Cepc8001spAbsEnergyReactive | 1.3.6.1.4.1.28507.100.1.5.5.2.1.12 | Gauge32 | RO | |
column · Gauge32 · read-only · current Absolute Reactive Energy counter.
| ||||
| Cepc8001spAbsEnergyActiveResettable | 1.3.6.1.4.1.28507.100.1.5.5.2.1.13 | Gauge32 | RW | |
column · Gauge32 · read-write · current Resettable Absolute Active Energy counter. Writing '0' resets all resettable counter.
| ||||
| Cepc8001spAbsEnergyReactiveResettable | 1.3.6.1.4.1.28507.100.1.5.5.2.1.14 | Gauge32 | RO | |
column · Gauge32 · read-only · current Resettable Absolute Reactive Energy counter.
| ||||
| Cepc8001spResetTime | 1.3.6.1.4.1.28507.100.1.5.5.2.1.15 | Gauge32 | RO | |
column · Gauge32 · read-only · current Time in seconds since last Energy Counter reset.
| ||||
| Cepc8001spForwEnergyActive | 1.3.6.1.4.1.28507.100.1.5.5.2.1.16 | Gauge32 | RO | |
column · Gauge32 · read-only · current Forward Active Energy counter.
| ||||
| Cepc8001spForwEnergyReactive | 1.3.6.1.4.1.28507.100.1.5.5.2.1.17 | Gauge32 | RO | |
column · Gauge32 · read-only · current Forward Reactive Energy counter.
| ||||
| Cepc8001spForwEnergyActiveResettable | 1.3.6.1.4.1.28507.100.1.5.5.2.1.18 | Gauge32 | RO | |
column · Gauge32 · read-only · current Resettable Forward Active Energy counter.
| ||||
| Cepc8001spForwEnergyReactiveResettable | 1.3.6.1.4.1.28507.100.1.5.5.2.1.19 | Gauge32 | RO | |
column · Gauge32 · read-only · current Resettable Forward Reactive Energy counter.
| ||||
| Cepc8001spRevEnergyActive | 1.3.6.1.4.1.28507.100.1.5.5.2.1.20 | Gauge32 | RO | |
column · Gauge32 · read-only · current Reverse Active Energy counter.
| ||||
| Cepc8001spRevEnergyReactive | 1.3.6.1.4.1.28507.100.1.5.5.2.1.21 | Gauge32 | RO | |
column · Gauge32 · read-only · current Reverse Reactive Energy counter.
| ||||
| Cepc8001spRevEnergyActiveResettable | 1.3.6.1.4.1.28507.100.1.5.5.2.1.22 | Gauge32 | RO | |
column · Gauge32 · read-only · current Resettable Reverse Active Energy counter.
| ||||
| Cepc8001spRevEnergyReactiveResettable | 1.3.6.1.4.1.28507.100.1.5.5.2.1.23 | Gauge32 | RO | |
column · Gauge32 · read-only · current Resettable Reverse Reactive Energy counter.
| ||||
| Nepc8001CPUSensors | 1.3.6.1.4.1.28507.100.1.5.14 | |||
| Sepc8001CPUSensorVsystem | 1.3.6.1.4.1.28507.100.1.5.14.1 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current System Voltage on CPU Board
| ||||
| Sepc8001CPUSensorVaux | 1.3.6.1.4.1.28507.100.1.5.14.2 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current Auxiliary Voltage on CPU Board
| ||||
| Sepc8001CPUSensorVmain | 1.3.6.1.4.1.28507.100.1.5.14.3 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current Main Voltage on CPU Board
| ||||
| Sepc8001CPUSensorTcpu | 1.3.6.1.4.1.28507.100.1.5.14.4 | Integer32 | RO | |
scalar · Integer32 · read-only · current Temperature on CPU Board | ||||
| Nepc8001NTPClient | 1.3.6.1.4.1.28507.100.1.5.15 | |||
| Sepc8001NTPTimeValid | 1.3.6.1.4.1.28507.100.1.5.15.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Show if valid Time is received
| ||||
| Sepc8001NTPUnixTime | 1.3.6.1.4.1.28507.100.1.5.15.2 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current show received NTP time as unixtime (secs since 1 January 1970)
| ||||
| Sepc8001NTPLastValidTimestamp | 1.3.6.1.4.1.28507.100.1.5.15.3 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current show seconds since last valid NTP timestamp received
| ||||
| Nepc8001ExtSensors | 1.3.6.1.4.1.28507.100.1.6 | |||
| Tepc8001SensorTable | 1.3.6.1.4.1.28507.100.1.6.1 | NA | ||
| Repc8001SensorEntry | 1.3.6.1.4.1.28507.100.1.6.1.1 | NA | ||
row · not-accessible · current
| ||||
| Cepc8001SensorIndex | 1.3.6.1.4.1.28507.100.1.6.1.1.1 | Integer32 (1..2) | RO | |
| Cepc8001TempSensor | 1.3.6.1.4.1.28507.100.1.6.1.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current actual temperature | ||||
| Cepc8001HygroSensor | 1.3.6.1.4.1.28507.100.1.6.1.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current actual humidity
| ||||
| Cepc8001AirPressure | 1.3.6.1.4.1.28507.100.1.6.1.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current actual air pressure | ||||
| Cepc8001DewPoint | 1.3.6.1.4.1.28507.100.1.6.1.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current dew point for actual temperature and humidity | ||||
| Cepc8001DewPointDiff | 1.3.6.1.4.1.28507.100.1.6.1.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current difference between dew point and actual temperature (Temp - DewPoint) | ||||
| Cepc8001ExtSensorName | 1.3.6.1.4.1.28507.100.1.6.1.1.32 | OCTET STRING (SIZE (0..32)) | RW | |
column · OCTET STRING (SIZE (0..32)) · read-write · current A textual string containing name of a external Sensor | ||||
| Nepc8001ExtInputs | 1.3.6.1.4.1.28507.100.1.6.2 | |||
| Sepc8001ExtActiveInputs | 1.3.6.1.4.1.28507.100.1.6.2.1 | Unsigned32 (1..12) | RO | |
scalar · Unsigned32 (1..12) · read-only · current Number of suppported Input Channels. | ||||
| Tepc8001ExtInputTable | 1.3.6.1.4.1.28507.100.1.6.2.2 | NA | ||
| Repc8001ExtInputEntry | 1.3.6.1.4.1.28507.100.1.6.2.2.1 | NA | ||
row · not-accessible · current
| ||||
| Cepc8001ExtInputIndex | 1.3.6.1.4.1.28507.100.1.6.2.2.1.1 | Unsigned32 | RO | |
| Cepc8001ExtInput | 1.3.6.1.4.1.28507.100.1.6.2.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Input state of device
| ||||
| Cepc8001ExtInputName | 1.3.6.1.4.1.28507.100.1.6.2.2.1.32 | OCTET STRING (SIZE (0..32)) | RW | |
column · OCTET STRING (SIZE (0..32)) · read-write · current A textual string containing name of the Input | ||||
| Cepc8001ExtInputPortNum | 1.3.6.1.4.1.28507.100.1.6.2.2.1.33 | Integer32 | RO | |
column · Integer32 · read-only · current Number of external Sensor Port when value greater zero, else device built-in Input. | ||||
| Cepc8001ExtInputBlockIndex | 1.3.6.1.4.1.28507.100.1.6.2.2.1.34 | Integer32 | RO | |
column · Integer32 · read-only · current Either index of device built-in Input, or index of Input in external sensor. | ||||
| Nepc8001Conf | 1.3.6.1.4.1.28507.100.2 | |||
| Nepc8001Groups | 1.3.6.1.4.1.28507.100.2.1 | |||
| Gepc8001BasicGroup | 1.3.6.1.4.1.28507.100.2.1.1 | |||
group · current Basic objects.
| ||||
| Gepc8001NotificationGroup | 1.3.6.1.4.1.28507.100.2.1.2 | |||
| Nepc8001Compls | 1.3.6.1.4.1.28507.100.2.2 | |||
| Nevents | 1.3.6.1.4.1.28507.100.3 | |||
| !epc8001SwitchEvtPort | 1.3.6.1.4.1.28507.100.3.1 | |||
notification · current Event is triggered when a port is switched | ||||
| !epc8001TempEvtSen | 1.3.6.1.4.1.28507.100.3.2 | |||
| !epc8001HygroEvtSen | 1.3.6.1.4.1.28507.100.3.3 | |||
| !epc8001AirPressureEvtSen | 1.3.6.1.4.1.28507.100.3.5 | |||
| !epc8001DewPtDiffEvtSen | 1.3.6.1.4.1.28507.100.3.6 | |||
notification · current Dew Point Difference limits exceeded | ||||
| !epc8001LineAmperageEvt | 1.3.6.1.4.1.28507.100.3.9 | |||
notification · current Event is triggered when a measured current is crossing the entered limits | ||||
| !epc8001PortAmperageEvt | 1.3.6.1.4.1.28507.100.3.11 | |||
notification · current Event is triggered when a measured current is crossing the entered limits | ||||
| !epc8001ExtInputEvt | 1.3.6.1.4.1.28507.100.3.25 | |||
notification · current Change of external sensor input. | ||||
Traps / Notifications
- epc8001AirPressureEvtSen
1.3.6.1.4.1.28507.100.3.5 - epc8001DewPtDiffEvtSen
1.3.6.1.4.1.28507.100.3.6 - epc8001ExtInputEvt
1.3.6.1.4.1.28507.100.3.25 - epc8001HygroEvtSen
1.3.6.1.4.1.28507.100.3.3 - epc8001LineAmperageEvt
1.3.6.1.4.1.28507.100.3.9 - epc8001PortAmperageEvt
1.3.6.1.4.1.28507.100.3.11 - epc8001SwitchEvtPort
1.3.6.1.4.1.28507.100.3.1 - epc8001TempEvtSen
1.3.6.1.4.1.28507.100.3.2