GENIE-ATM-SYSTEM-MIB
Genie Network Resource ManagementThe MIB module describes GenieATM system, module objects.
snmptranslate -m GENIE-ATM-SYSTEM-MIB -Tpsnmpwalk -v2c -c <community> -m GENIE-ATM-SYSTEM-MIB <host> 1.3.6.1.4.1.9926.1.21.1Imports
| GENIE-GE-ROOT-MIB | atm |
|---|---|
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddress |
| IPV6-TC | Ipv6Address |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IgenieAtmSystemMIB | 1.3.6.1.4.1.9926.1.21.1 | |||
identity The MIB module describes GenieATM system, module objects. | ||||
| NgeAtmSystemInfo | 1.3.6.1.4.1.9926.1.21.1.1 | |||
| SgeAtmSystemRebootTime | 1.3.6.1.4.1.9926.1.21.1.1.1 | DisplayString | NA | |
scalar · DisplayString · not-accessible · current The system reboot time of the device. | ||||
| TgeAtmSystemAnalyzerTable | 1.3.6.1.4.1.9926.1.21.1.1.2 | NA | ||
table · not-accessible · current This table provides the information and status of analyzer inventories such as collectors. | ||||
| RgeAtmSystemAnalyzerEntry | 1.3.6.1.4.1.9926.1.21.1.1.2.1 | NA | ||
row · not-accessible · current (Controller only)This table contains the module ID, CPU loading and memory usage for each collector, FLB and msp server. | ||||
| CgeAtmSystemAnalyzerModuleID | 1.3.6.1.4.1.9926.1.21.1.1.2.1.1 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current The unique ID of analyzer module. There is only one Controller and with multiple Collectors for one system. | ||||
| CgeAtmSystemAnalyzerType | 1.3.6.1.4.1.9926.1.21.1.1.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The type of analyzer module, i.e. Controller, Collector, FLB in the ATM system.
| ||||
| CgeAtmSystemAnalyzerIPAddress | 1.3.6.1.4.1.9926.1.21.1.1.2.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address of analyzer module. | ||||
| CgeAtmSystemAnalyzerCpuLoad | 1.3.6.1.4.1.9926.1.21.1.1.2.1.4 | Gauge32 | RO | |
column · Gauge32 · read-only · current The CPU usage percentage of the analyzer. | ||||
| CgeAtmSystemAnalyzerMemUsage | 1.3.6.1.4.1.9926.1.21.1.1.2.1.5 | Gauge32 | RO | |
column · Gauge32 · read-only · current The memory usage percentage of the analyzer. | ||||
| SgeAtmSystemSslExpirationTime | 1.3.6.1.4.1.9926.1.21.1.1.3 | DisplayString | NA | |
scalar · DisplayString · not-accessible · current The SSL certificate expiration time of the device. | ||||
| SgeAtmSystemDeviceCpuLoad | 1.3.6.1.4.1.9926.1.21.1.1.4 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The CPU usage percentage of this local device. | ||||
| SgeAtmSystemDeviceMemUsage | 1.3.6.1.4.1.9926.1.21.1.1.5 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The memory usage percentage of this local device | ||||
| NgeAtmModule | 1.3.6.1.4.1.9926.1.21.1.2 | |||
| TgeAtmModuleTable | 1.3.6.1.4.1.9926.1.21.1.2.1 | NA | ||
table · not-accessible · current This table provides the basic configuration information of ATM modules. ATM has two types of modules: Controller, and Collector. | ||||
| RgeAtmModuleEntry | 1.3.6.1.4.1.9926.1.21.1.2.1.1 | NA | ||
row · not-accessible · current This table contains module ID, module type, module IP, admin status, operation status, configure version, processed NetFlow number, dropped packet number, and storage usage.
| ||||
| CgeAtmModuleID | 1.3.6.1.4.1.9926.1.21.1.2.1.1.1 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current The ID of a module. It is an unique number in the system. There is only one Controller and with multiple Collectors for one system. | ||||
| CgeAtmModuleType | 1.3.6.1.4.1.9926.1.21.1.2.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The type of a module, i.e. either Controller, Collector, FLB, MSP Server, Probe, Report Aggregator, Route Analyzer, TopN Builder or Data Server in the ATM system. Please note msp-server(3) is obsolete from ver 7.1.3
| ||||
| CgeAtmModuleIPAddress | 1.3.6.1.4.1.9926.1.21.1.2.1.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current Module IP address. | ||||
| CgeAtmModuleAdminStatus | 1.3.6.1.4.1.9926.1.21.1.2.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The administration status of the module.
| ||||
| CgeAtmModuleOperationStatus | 1.3.6.1.4.1.9926.1.21.1.2.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The operation status of the module. The 'abnormal' status is for the scenario when the process number or thread number is less than the normal state.
| ||||
| CgeAtmModuleCfgVersion | 1.3.6.1.4.1.9926.1.21.1.2.1.1.6 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Configuration version of module (based on the version provided by CM) in ATM system. | ||||
| CgeAtmModuleProcessedNetFlowNum | 1.3.6.1.4.1.9926.1.21.1.2.1.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The processed Netflow number. This object only applies to Collector only. | ||||
| CgeAtmModuleDroppedPktNum | 1.3.6.1.4.1.9926.1.21.1.2.1.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The dropped packet number. This object only applies to Collector only. | ||||
| CgeAtmModuleStorageUsage | 1.3.6.1.4.1.9926.1.21.1.2.1.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current The storage usage for each module. On controller (all-in-one)
the storage usage for controller is the DB usage, the storage
usage for the collector is raw data usage or -1 to indicate
the collector is disabled or the storage usage for collector
is not available. On collector the storage usage for collector
is the raw data usage. If the collector is not enabled to
write the raw data then -1 is returned to indicate the
collector storage usage is not available. There is no
controller on collector therefore the storage usage for
controller is -1 on collector. | ||||
| CgeAtmModuleAnomalyRawUsage | 1.3.6.1.4.1.9926.1.21.1.2.1.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current The anomaly raw storage usage for collector module only.
For controller module and collector module without anomaly
raw partition mounted, -1 will be returned to indicate the
anomaly raw storage usage is not available. | ||||
| CgeAtmModuleDroppedFlows | 1.3.6.1.4.1.9926.1.21.1.2.1.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current The number of dropped flow records by Collector. This object only applies to Collector module. | ||||
| CgeAtmModuleFlowTreapCounters | 1.3.6.1.4.1.9926.1.21.1.2.1.1.12 | Counter64 | RO | |
column · Counter64 · read-only · current The number of TopN Report Counters been calculated by Collector. This object is treated as a performance index while reviewing flow capacity and only applies to Collector module. | ||||
| CgeAtmModuleDeliverCommands | 1.3.6.1.4.1.9926.1.21.1.2.1.1.13 | Counter64 | RO | |
column · Counter64 · read-only · current The number of commands sent to the Top-N builder by the Collector. | ||||
| CgeAtmModuleDeliverFailedCommands | 1.3.6.1.4.1.9926.1.21.1.2.1.1.14 | Counter64 | RO | |
column · Counter64 · read-only · current The number of commands failed to send to the Top-N builder by the Collector. | ||||
| CgeAtmModuleLicExceedPkt | 1.3.6.1.4.1.9926.1.21.1.2.1.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packet drops by the Collector due to exceeding license limit. | ||||
| CgeAtmModuleSentFlows | 1.3.6.1.4.1.9926.1.21.1.2.1.1.16 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of flow records which were sent from the flow exporting/forwarding entity to other collectors. | ||||
| CgeAtmModuleUpTime | 1.3.6.1.4.1.9926.1.21.1.2.1.1.17 | TimeTicks | RO | |
column · TimeTicks · read-only · current This table recoreds module up time. | ||||
| CgeAtmHardwareIPAddress1 | 1.3.6.1.4.1.9926.1.21.1.2.1.1.18 | IpAddress | RO | |
column · IpAddress · read-only · current ATM Device Hardware IP address. | ||||
| CgeAtmHardwareIPAddress2 | 1.3.6.1.4.1.9926.1.21.1.2.1.1.19 | IpAddress | RO | |
column · IpAddress · read-only · current ATM Device Hardware IP address. | ||||
| CgeAtmModuleMaxRecvFlowsFiveMinutes | 1.3.6.1.4.1.9926.1.21.1.2.1.1.20 | Integer32 | RO | |
column · Integer32 · read-only · current This table recoreds the max flows/s received during 5-min interval. | ||||
| CgeAtmModuleMaxRecvFlowsTimeFiveMinutes | 1.3.6.1.4.1.9926.1.21.1.2.1.1.21 | TimeTicks | RO | |
column · TimeTicks · read-only · current This table records the time of the max flows/s received during 5-min interval. | ||||
| CgeAtmModuleFollowCollection | 1.3.6.1.4.1.9926.1.21.1.2.1.1.22 | Integer32 | RO | |
column · Integer32 · read-only · current The value indicates the flow collection is enabled/disabled. | ||||
| CgeAtmModuleRouterEventViewer | 1.3.6.1.4.1.9926.1.21.1.2.1.1.23 | Integer32 | RO | |
column · Integer32 · read-only · current The value indicates if the route event viewer is available. | ||||
| CgeAtmModuleRouterEventReport | 1.3.6.1.4.1.9926.1.21.1.2.1.1.24 | Integer32 | RO | |
column · Integer32 · read-only · current Indicate if the route event report is available. | ||||
| CgeAtmModuleSerialNumber | 1.3.6.1.4.1.9926.1.21.1.2.1.1.25 | Integer32 | RO | |
column · Integer32 · read-only · current To show the license serial number. | ||||
| CgeAtmModuleLicExpiryDate | 1.3.6.1.4.1.9926.1.21.1.2.1.1.26 | SnmpAdminString | RO | |
column · SnmpAdminString · read-only · current The expiry date of the existing license. | ||||
| CgeAtmModuleLicType | 1.3.6.1.4.1.9926.1.21.1.2.1.1.27 | INTEGER | RO | |
column · INTEGER · read-only · current The license type of the existing license.
| ||||
| CgeAtmStorage | 1.3.6.1.4.1.9926.1.21.1.2.1.1.28 | SnmpAdminString | RO | |
column · SnmpAdminString · read-only · current The storage type of the db backup. | ||||
| CgeAtmVrrpOperationStatus | 1.3.6.1.4.1.9926.1.21.1.2.1.1.29 | INTEGER | RO | |
column · INTEGER · read-only · current Indicate the VRRP status change.
| ||||
| CgeAtmModuleTicketDataCounters | 1.3.6.1.4.1.9926.1.21.1.2.1.1.30 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Anomaly Ticket Data Counters been calculated by Atd module. This object is treated as a performance index while reviewing ticket data. | ||||
| CgeAtmModuleTicketAggregatedDataCounters | 1.3.6.1.4.1.9926.1.21.1.2.1.1.31 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Anomaly Ticket Data Counters been aggregated by Atd module. This object is treated as a performance index while reviewing ticket aggregated data. | ||||
| CgeAtmModuleSentFilteredFlows | 1.3.6.1.4.1.9926.1.21.1.2.1.1.32 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of flow records which were sent by filtering operation. | ||||
| CgeAtmSubModuleName | 1.3.6.1.4.1.9926.1.21.1.2.1.1.33 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The Name of a sub-module. | ||||
| CgeAtmClusterRole | 1.3.6.1.4.1.9926.1.21.1.2.1.1.34 | INTEGER | RO | |
column · INTEGER · read-only · current Indicate the Notify Action Cluster Role change.
| ||||
| CgeAtmModuleSerialNumberV2 | 1.3.6.1.4.1.9926.1.21.1.2.1.1.35 | DisplayString | RO | |
column · DisplayString · read-only · current To show the license serial number string. | ||||
| NgeAtmMonitor | 1.3.6.1.4.1.9926.1.21.1.3 | |||
| TgeAtmMonIfTable | 1.3.6.1.4.1.9926.1.21.1.3.1 | NA | ||
table · not-accessible · current A MIB table to support SNMP ifTable monitoring for ATM modules. This MIB is used for trap only. | ||||
| RgeAtmMonIfEntry | 1.3.6.1.4.1.9926.1.21.1.3.1.1 | NA | ||
row · not-accessible · current This table contains monitoring target in ATM. It includes what
are the monitored, the value triggering the alert, the value
of the threshold, and IP address. | ||||
| CgeAtmMonIfIndex | 1.3.6.1.4.1.9926.1.21.1.3.1.1.1 | INTEGER (1..65535) | NA | |
column · INTEGER (1..65535) · not-accessible · current The monitored interface index. | ||||
| CgeAtmMonIfRtrIpAddr | 1.3.6.1.4.1.9926.1.21.1.3.1.1.2 | IpAddress | NA | |
column · IpAddress · not-accessible · current The IP address of the monitored router. | ||||
| CgeAtmMonIfStatsType | 1.3.6.1.4.1.9926.1.21.1.3.1.1.3 | INTEGER | RO | deprecated |
column · INTEGER · read-only · deprecated The monitored interface traffic statistic object type.
| ||||
| CgeAtmMonIfStatsValue | 1.3.6.1.4.1.9926.1.21.1.3.1.1.4 | Counter32 | NA | |
column · Counter32 · not-accessible · current The value for the traffic statistic object of monitored interface. | ||||
| CgeAtmMonIfThresd | 1.3.6.1.4.1.9926.1.21.1.3.1.1.5 | Counter32 | NA | |
column · Counter32 · not-accessible · current The threshold of the traffic statistic object of monitored interface. | ||||
| TgeAtmBgpHijackInfoTable | 1.3.6.1.4.1.9926.1.21.1.3.2 | NA | ||
table · not-accessible · current A MIB table of BGP route monitoring. This MIB is used for trap only. | ||||
| RgeAtmBgpHijackInfoEntry | 1.3.6.1.4.1.9926.1.21.1.3.2.1 | NA | ||
row · not-accessible · current This table contains BGP hijack information. | ||||
| CgeAtmBgpHijackInfoBrIp | 1.3.6.1.4.1.9926.1.21.1.3.2.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current The IP address of router where the BGP hijack is detected. | ||||
| CgeAtmBgpHijackInfoPeerAS | 1.3.6.1.4.1.9926.1.21.1.3.2.1.2 | INTEGER (1..65535) | NA | |
column · INTEGER (1..65535) · not-accessible · current The neighbour ASN that passing the hijacked prefix. | ||||
| CgeAtmBgpHijackInfoBgpPrefix | 1.3.6.1.4.1.9926.1.21.1.3.2.1.3 | DisplayString | NA | |
column · DisplayString · not-accessible · current The prefix that passed by neighbor ASN was one of home prefixes. | ||||
| CgeAtmBgpHijackInfoOriginalAS | 1.3.6.1.4.1.9926.1.21.1.3.2.1.4 | INTEGER (1..65535) | NA | |
column · INTEGER (1..65535) · not-accessible · current The original ASN that announced the hijacked prefix. | ||||
| TgeAtmBgpMsgMonTable | 1.3.6.1.4.1.9926.1.21.1.3.3 | NA | ||
table · not-accessible · current A MIB table to provide information of BGP updated messages
monitoring.
This MIB is used for trap only. | ||||
| RgeAtmBgpMsgMonEntry | 1.3.6.1.4.1.9926.1.21.1.3.3.1 | NA | ||
row · not-accessible · current This table contains BGP message update information. | ||||
| CgeAtmBgpMsgMonRouterIp | 1.3.6.1.4.1.9926.1.21.1.3.3.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current The IP address of router that received the BGP message updates crossing the threshold. | ||||
| CgeAtmBgpMsgMonThresd | 1.3.6.1.4.1.9926.1.21.1.3.3.1.2 | Integer32 | NA | |
column · Integer32 · not-accessible · current The threshold of BGP updated messages within 5 minutes interval. | ||||
| CgeAtmBgpMsgMonUpdateNum | 1.3.6.1.4.1.9926.1.21.1.3.3.1.3 | Integer32 | NA | |
column · Integer32 · not-accessible · current The number of BGP updated messages received within 5 minutes interval. | ||||
| CgeAtmBgpMsgMonThresdStatus | 1.3.6.1.4.1.9926.1.21.1.3.3.1.4 | INTEGER | NA | |
column · INTEGER · not-accessible · current The status of the threshold (exceed higher or below lower bound of threshold.)
| ||||
| CgeAtmBgpMsgMonTop1Asn | 1.3.6.1.4.1.9926.1.21.1.3.3.1.5 | INTEGER (1..65535) | NA | |
column · INTEGER (1..65535) · not-accessible · current The Top 1 ASN that generates BGP message updates. | ||||
| CgeAtmBgpMsgMonTop1AsnMsgPercentage | 1.3.6.1.4.1.9926.1.21.1.3.3.1.6 | INTEGER (0..100) | NA | |
column · INTEGER (0..100) · not-accessible · current The percentage of BGP Update messages from The Top 1 ASN. | ||||
| CgeAtmBgpMsgMonTop2Asn | 1.3.6.1.4.1.9926.1.21.1.3.3.1.7 | INTEGER (1..65535) | NA | |
column · INTEGER (1..65535) · not-accessible · current The Top 2 ASN that generates BGP message updates. | ||||
| CgeAtmBgpMsgMonTop2AsnMsgPercentage | 1.3.6.1.4.1.9926.1.21.1.3.3.1.8 | INTEGER (0..100) | NA | |
column · INTEGER (0..100) · not-accessible · current The percentage of BGP Update messages from The Top 2 ASN. | ||||
| CgeAtmBgpMsgMonTop3Asn | 1.3.6.1.4.1.9926.1.21.1.3.3.1.9 | INTEGER (1..65535) | NA | |
column · INTEGER (1..65535) · not-accessible · current The Top 3 ASN that generates BGP message updates. | ||||
| CgeAtmBgpMsgMonTop3AsnMsgPercentage | 1.3.6.1.4.1.9926.1.21.1.3.3.1.10 | INTEGER (0..100) | NA | |
column · INTEGER (0..100) · not-accessible · current The percentage of BGP Update messages from The Top 3 ASN. | ||||
| SgeAtmDBStorageThresd | 1.3.6.1.4.1.9926.1.21.1.3.4 | Integer32 | NA | |
scalar · Integer32 · not-accessible · current The threshold of DB storage in percentage. This MIB is used for trap only. | ||||
| SgeAtmDBStorageStatsValue | 1.3.6.1.4.1.9926.1.21.1.3.5 | Integer32 | NA | |
scalar · Integer32 · not-accessible · current The current usage of DB storage in percentage. This MIB is used for trap only. | ||||
| SgeAtmSeverity | 1.3.6.1.4.1.9926.1.21.1.3.6 | INTEGER | NA | |
scalar · INTEGER · not-accessible · current The severity of the alert. The red means one of the
following occurred:
1. The Module operation status is changed;
2. BGP hijack occurred;
3. The number of BGP updated messages crossing the threshold;
4. Configuration dispatched to a module failed;
5. No netflow received by exporter more than 5 minutes;
6. The usage of DB storage crossing the threshold;
7. The snmp polling to a router failed;
The normal means the recovery from one of the above alerts.
This MIB is used for trap only.
| ||||
| SgeAtmRouterIP | 1.3.6.1.4.1.9926.1.21.1.3.7 | IpAddress | NA | |
scalar · IpAddress · not-accessible · current The router IP address. This MIB is used for trap only. | ||||
| SgeAtmAlertStatus | 1.3.6.1.4.1.9926.1.21.1.3.8 | INTEGER | NA | |
scalar · INTEGER · not-accessible · current The status of the alert. The alert means one of the
following occurred:
1. The Module operation status is changed;
2. BGP hijack occurred;
3. The number of BGP updated messages crossing the threshold;
4. Configuration dispatched to a module failed;
5. No netflow received by exporter more than 5 minutes;
6. The usage of DB storage crossing the threshold;
7. The snmp polling to a router failed;
8. NFS stopped writing activity for more than 5 minutes;
The alertRecover means the recovery from one of the
above alerts.
This MIB is used for trap only.
| ||||
| TgeAtmRawDataInfoTable | 1.3.6.1.4.1.9926.1.21.1.3.9 | NA | ||
table · not-accessible · current This table provides information of stored flow raw
data which was written to file every 5 minutes. The
data from one continuous duration is one record.
The information for each record are: start time of
the period, end time of the period, and total file size.
This MIB is used for trap only. | ||||
| RgeAtmRawDataInfoEntry | 1.3.6.1.4.1.9926.1.21.1.3.9.1 | NA | ||
row · not-accessible · current This table contains raw data record start time, end time, and total file size. | ||||
| CgeAtmRawDataStartTime | 1.3.6.1.4.1.9926.1.21.1.3.9.1.1 | TimeTicks | RO | |
column · TimeTicks · read-only · current The start time of raw data record. | ||||
| CgeAtmRawDataEndTime | 1.3.6.1.4.1.9926.1.21.1.3.9.1.2 | TimeTicks | RO | |
column · TimeTicks · read-only · current The end time of raw data record. | ||||
| CgeAtmRawDataSize | 1.3.6.1.4.1.9926.1.21.1.3.9.1.3 | Gauge32 | RO | |
column · Gauge32 · read-only · current The size of raw data record for one continous duration. | ||||
| SgeAtmRouterUtilsThresd | 1.3.6.1.4.1.9926.1.21.1.3.10 | INTEGER (0..100) | NA | |
scalar · INTEGER (0..100) · not-accessible · current The Usage Threshold of the Router. This MIB is used for Router CPU and Memory Usage Monitoring trap only. | ||||
| SgeAtmRouterCpuUtils | 1.3.6.1.4.1.9926.1.21.1.3.11 | INTEGER (0..100) | NA | |
scalar · INTEGER (0..100) · not-accessible · current The CPU usage of the Router. This MIB is used for trap only. | ||||
| SgeAtmRouterMemoryUtils | 1.3.6.1.4.1.9926.1.21.1.3.12 | INTEGER (0..100) | NA | |
scalar · INTEGER (0..100) · not-accessible · current The Memory usage of the Router. This MIB is used for trap only. | ||||
| SgeAtmIpmiSystemEventLog | 1.3.6.1.4.1.9926.1.21.1.3.13 | DisplayString | RO | |
scalar · DisplayString · read-only · current The SEL (system event log) generated by IPMI tool. This MIB is used for trap only. | ||||
| TgeAtmRaidTable | 1.3.6.1.4.1.9926.1.21.1.3.14 | NA | deprecated | |
table · not-accessible · deprecated A table containing RAID virtual disk specific information. This MIB is used for trap only. | ||||
| RgeAtmRaidEntry | 1.3.6.1.4.1.9926.1.21.1.3.14.1 | NA | ||
row · not-accessible · current Information about a particular RAID virtual disk. | ||||
| CgeAtmRaidVirtualDiskID | 1.3.6.1.4.1.9926.1.21.1.3.14.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The virtual disk ID for this virtual disk. | ||||
| CgeAtmRaidVirtualDiskSize | 1.3.6.1.4.1.9926.1.21.1.3.14.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The size of this virtual disk, measured in megabytes.
| ||||
| CgeAtmRaidVirtualDiskState | 1.3.6.1.4.1.9926.1.21.1.3.14.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The state of this virtual disk.
| ||||
| CgeAtmRaidVirtualDiskNumOfPhyDisk | 1.3.6.1.4.1.9926.1.21.1.3.14.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The number of physical disks for this virtual disk. | ||||
| SgeAtmModuleDroppedPktThresd | 1.3.6.1.4.1.9926.1.21.1.3.16 | Integer32 | NA | |
scalar · Integer32 · not-accessible · current The threshold of the number of dropped packets of a Collector. This MIB is used for trap only. | ||||
| SgeAtmModuleDroppedPktNum5Min | 1.3.6.1.4.1.9926.1.21.1.3.17 | Integer32 | NA | |
scalar · Integer32 · not-accessible · current The number of dropped packets of a Collector within 5-minute interval. This MIB is used for trap only. | ||||
| SgeAtmQueueStatus | 1.3.6.1.4.1.9926.1.21.1.3.18 | INTEGER | RO | |
scalar · INTEGER · read-only · current The operation status of Module Queue. The status 'up' represent the Queue is non-full and status 'down' represent the Queue is full. This MIB is used for trap only.
| ||||
| SgeAtmModuleLicExceedPktNumFiveMinutes | 1.3.6.1.4.1.9926.1.21.1.3.19 | Integer32 | NA | |
scalar · Integer32 · not-accessible · current The number of exceed license packets of a Collector within 5-minute interval. This MIB is used for trap only. | ||||
| SgeAtmModuleLicExceedPktThresd | 1.3.6.1.4.1.9926.1.21.1.3.20 | Integer32 | NA | |
scalar · Integer32 · not-accessible · current The threshold of the number of exceed license packets of a Collector. This MIB is used for trap only. | ||||
| SgeAtmModuleUtilsThresd | 1.3.6.1.4.1.9926.1.21.1.3.21 | INTEGER (0..100) | NA | |
scalar · INTEGER (0..100) · not-accessible · current The Usage Threshold of the Module. This MIB is used for Module CPU and Memory Usage Monitoring trap only. | ||||
| SgeAtmModuleCpuUtils | 1.3.6.1.4.1.9926.1.21.1.3.22 | INTEGER (0..100) | NA | |
scalar · INTEGER (0..100) · not-accessible · current The CPU usage of the Module. This MIB is used for trap only. | ||||
| SgeAtmModuleMemoryUtils | 1.3.6.1.4.1.9926.1.21.1.3.23 | INTEGER (0..100) | NA | |
scalar · INTEGER (0..100) · not-accessible · current The Memory usage of the Module. This MIB is used for trap only. | ||||
| SgeAtmModuleLicExceedFlowNum | 1.3.6.1.4.1.9926.1.21.1.3.24 | Integer32 | NA | |
scalar · Integer32 · not-accessible · current The number of exceed license flows of a flow counter. This MIB is used for trap only. | ||||
| SgeAtmModuleLicExceedFlowThresd | 1.3.6.1.4.1.9926.1.21.1.3.25 | Integer32 | NA | |
scalar · Integer32 · not-accessible · current The threshold of the number of exceed license flows of a flow counter. This MIB is used for trap only. | ||||
| SgeAtmRouterIPV2 | 1.3.6.1.4.1.9926.1.21.1.3.26 | InetAddress | NA | |
scalar · InetAddress · not-accessible · current The router IP address. This MIB is used for trap only. | ||||
| SgeAtmBgpRouteChangeThresd | 1.3.6.1.4.1.9926.1.21.1.3.27 | Integer32 | NA | |
scalar · Integer32 · not-accessible · current The threshold of the number of BGP route change. This MIB is used for trap only. | ||||
| SgeAtmBgpRouteChange5Min | 1.3.6.1.4.1.9926.1.21.1.3.28 | Integer32 | NA | |
scalar · Integer32 · not-accessible · current The number of BGP route change within 5 minutes interval. This MIB is used for trap only. | ||||
| SgeAtmBmpPeerIp | 1.3.6.1.4.1.9926.1.21.1.3.29 | InetAddress | NA | |
scalar · InetAddress · not-accessible · current The IP address of the peer router. This MIB is used for trap only. | ||||
| NgeAtmBaseline | 1.3.6.1.4.1.9926.1.21.1.4 | |||
| TgeAtmAnomalyTable | 1.3.6.1.4.1.9926.1.21.1.4.1 | NA | ||
table · not-accessible · current This table provides anomaly information. | ||||
| RgeAtmAnomalyEntry | 1.3.6.1.4.1.9926.1.21.1.4.1.1 | NA | ||
row · not-accessible · current This table contains anomaly information - ID, cause, created time, updated time, category, type, unit, severity, status, resource name, resource importance, traffic direction, traffic statistic object value, threshold value, URL link to anomaly report.
| ||||
| CgeAtmAnomalyId | 1.3.6.1.4.1.9926.1.21.1.4.1.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The Anomaly ID. | ||||
| CgeAtmAnomalyAppId | 1.3.6.1.4.1.9926.1.21.1.4.1.1.2 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The Anomaly Application ID for Protocol-Misuse and Application Anomaly. | ||||
| CgeAtmAnomalyCreatedTime | 1.3.6.1.4.1.9926.1.21.1.4.1.1.3 | TimeTicks | NA | |
column · TimeTicks · not-accessible · current The creation time of the Anomaly. | ||||
| CgeAtmAnomalyCategory | 1.3.6.1.4.1.9926.1.21.1.4.1.1.4 | INTEGER | NA | |
column · INTEGER · not-accessible · current The Anomaly Category - 1. Interface Traffic Anomaly; 2. Traffic Anomaly; 3. Protocol Misuse Anomaly; 4. Application Anomaly. 5. Filter based Traffic Monitor Anomaly. 6. Router based Prefix Traffic Anomaly (Obsolete in ATM 6.0).
| ||||
| CgeAtmAnomalyTrafficStatsType | 1.3.6.1.4.1.9926.1.21.1.4.1.1.5 | INTEGER | NA | |
column · INTEGER · not-accessible · current The traffic Statistics type triggered the Anomaly.
| ||||
| CgeAtmAnomalySeverity | 1.3.6.1.4.1.9926.1.21.1.4.1.1.6 | INTEGER | NA | |
column · INTEGER · not-accessible · current The level of Anomaly Severity.
| ||||
| CgeAtmAnomalyResourceName | 1.3.6.1.4.1.9926.1.21.1.4.1.1.7 | OCTET STRING | NA | |
column · OCTET STRING · not-accessible · current The name of customer, or interface. | ||||
| CgeAtmAnomalyResourceImportance | 1.3.6.1.4.1.9926.1.21.1.4.1.1.8 | INTEGER | NA | |
column · INTEGER · not-accessible · current The importance of resource - high or regular.
| ||||
| CgeAtmAnomalyTrafficDirection | 1.3.6.1.4.1.9926.1.21.1.4.1.1.9 | INTEGER | NA | |
column · INTEGER · not-accessible · current The Traffic Direction of Anomaly - incoming (filter direction) or outgoing (opposite to the filter).
| ||||
| CgeAtmAnomalyTrafficStatsValue | 1.3.6.1.4.1.9926.1.21.1.4.1.1.10 | DisplayString | NA | |
column · DisplayString · not-accessible · current The value of anomaly traffic which triggered Yellow or Red anomaly, depending on geAtmAnomalySeverity. This value is Counter64. | ||||
| CgeAtmAnomalyThresholdValue | 1.3.6.1.4.1.9926.1.21.1.4.1.1.11 | DisplayString | NA | |
column · DisplayString · not-accessible · current The value of Anomaly Threshold. The value is counter64 bit. | ||||
| CgeAtmAnomalyRptUrlLink | 1.3.6.1.4.1.9926.1.21.1.4.1.1.12 | DisplayString | NA | |
column · DisplayString · not-accessible · current The URL to link to Anomaly Report. | ||||
| CgeAtmAnomalyTrafficStatsUnit | 1.3.6.1.4.1.9926.1.21.1.4.1.1.13 | INTEGER | NA | |
column · INTEGER · not-accessible · current The traffic Statistics unit.
| ||||
| CgeAtmAnomalyStatus | 1.3.6.1.4.1.9926.1.21.1.4.1.1.14 | INTEGER | NA | |
column · INTEGER · not-accessible · current The status of Anomaly: ongoing means the traffic is higher than the high watermark or lower than the low water mark, recover means the traffic is back to normal, obsolete means either the customer or resource is deleted or the unit of the threshold is changed.
| ||||
| CgeAtmAnomalyHost | 1.3.6.1.4.1.9926.1.21.1.4.1.1.15 | IpAddress | NA | |
column · IpAddress · not-accessible · current The IP address of victim or attacker of Protocol-Misuse Anomaly or IP Address of infected host of Application Anomaly. | ||||
| CgeAtmAnomalyIpV6Host | 1.3.6.1.4.1.9926.1.21.1.4.1.1.16 | Ipv6Address | NA | |
column · Ipv6Address · not-accessible · current The IPv6 address of victim or attacker of Protocol-Misuse Anomaly or IPv6 Address of infected host of Application Anomaly. | ||||
| CgeAtmAnomalyIdString | 1.3.6.1.4.1.9926.1.21.1.4.1.1.17 | DisplayString | NA | |
column · DisplayString · not-accessible · current The Anomaly ID. | ||||
| CgeAtmAnomalyHostIpVersion | 1.3.6.1.4.1.9926.1.21.1.4.1.1.18 | INTEGER | NA | |
column · INTEGER · not-accessible · current The IP version of the anomaly host. It is valid from GenieATM version 6.4.1.
| ||||
| CgeAtmAnomalyHostIpString | 1.3.6.1.4.1.9926.1.21.1.4.1.1.19 | DisplayString | NA | |
column · DisplayString · not-accessible · current The IP address of the anomaly host. It is valid from GenieATM version 6.4.1. | ||||
| CgeAtmAnomalyAttackDirection | 1.3.6.1.4.1.9926.1.21.1.4.1.1.20 | INTEGER | NA | |
column · INTEGER · not-accessible · current The Attack Direction of Anomaly - inbound or outbound.
| ||||
| TgeAtmMitigationTable | 1.3.6.1.4.1.9926.1.21.1.4.2 | NA | ||
table · not-accessible · current This table provides mitigation information. | ||||
| RgeAtmMitigationEntry | 1.3.6.1.4.1.9926.1.21.1.4.2.1 | NA | ||
row · not-accessible · current This table contains mitigation information - status, mitigation id, mitigation device, mitigation method, protected description.
| ||||
| CgeAtmMitigationStatus | 1.3.6.1.4.1.9926.1.21.1.4.2.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current The mitigation status.
| ||||
| CgeAtmMitigationId | 1.3.6.1.4.1.9926.1.21.1.4.2.1.2 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The mitigation ID. | ||||
| CgeAtmMitigationDeviceId | 1.3.6.1.4.1.9926.1.21.1.4.2.1.3 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The mitigation device ID. | ||||
| CgeAtmMitigationMethod | 1.3.6.1.4.1.9926.1.21.1.4.2.1.4 | INTEGER | NA | |
column · INTEGER · not-accessible · current The mitigation method ID.
| ||||
| CgeAtmMitigationProtectDescription | 1.3.6.1.4.1.9926.1.21.1.4.2.1.5 | DisplayString | NA | |
column · DisplayString · not-accessible · current The protected description content - 1. Flow Spec: Traffic Filtering 2. Other: Protected Prefix | ||||
| CgeAtmMitigationIdString | 1.3.6.1.4.1.9926.1.21.1.4.2.1.6 | DisplayString | NA | |
column · DisplayString · not-accessible · current The mitigation ID String. | ||||
| NgeAtmExporter | 1.3.6.1.4.1.9926.1.21.1.5 | |||
| TgeAtmExporterTable | 1.3.6.1.4.1.9926.1.21.1.5.1 | NA | ||
table · not-accessible · current This table supplies the information of exporters whose netflow processed by collector. | ||||
| RgeAtmExporterEntry | 1.3.6.1.4.1.9926.1.21.1.5.1.1 | NA | ||
row · not-accessible · current This table contains the exporter IP addresses, netflow numbers, and the last time stamp when the netflow processed by collector (for each exporter).
| ||||
| CgeAtmExporterIpAddr | 1.3.6.1.4.1.9926.1.21.1.5.1.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address of exporter. | ||||
| CgeAtmExporterNetFlowNum | 1.3.6.1.4.1.9926.1.21.1.5.1.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The netflow number processed by collector for the exporter. | ||||
| CgeAtmExporterLastExportTime | 1.3.6.1.4.1.9926.1.21.1.5.1.1.3 | TimeTicks | RO | |
column · TimeTicks · read-only · current The last time stamp when the netflow is processed by the collector for each exporter. | ||||
| CgeAtmExporterDroppedFlows | 1.3.6.1.4.1.9926.1.21.1.5.1.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The number of flow records dropped by Collector for this exporter. | ||||
| CgeAtmExporterDroppedFlowNumByRate | 1.3.6.1.4.1.9926.1.21.1.5.1.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The number of flow records dropped by collector due to the rate-limit of this exporter. | ||||
| NgeAtmSystemTraps | 1.3.6.1.4.1.9926.1.21.1.6 | |||
| !geAtmIfAlert | 1.3.6.1.4.1.9926.1.21.1.6.1 | deprecated | ||
notification · deprecated The trap definition for the router interface whose traffic statistic object is crossing over the threshold. The oid of ifIndex, IP address, statistic type, statistic value, threshold, and the severity (red, normal) are sent. The trap receiver can tell whether the statistic value is crossing the higher or lower bound by the severity. | ||||
| !geAtmModuleAlert | 1.3.6.1.4.1.9926.1.21.1.6.2 | |||
notification · current The trap definition for the module whose operation status is changed. | ||||
| !geAtmBgpHijackAlert | 1.3.6.1.4.1.9926.1.21.1.6.3 | |||
notification · current The trap definition for the BGP hijack is detected for a router. The oid of router IP address, peer AS, BGP prefix, original AS, and severity are sent. | ||||
| !geAtmBgpMsgUpdateAlert | 1.3.6.1.4.1.9926.1.21.1.6.4 | deprecated | ||
notification · deprecated The trap definition for the number of BGP updated message of a router is crossing the boundary of threshold. The oid of BGP router IP address, updated message number, threshold, and the threshold status (excced high or below low) are sent. The trap receiver can tell whether the statistic value is crossing the higher or lower bound by the thresdstatus. | ||||
| !geAtmConfigUpdateAlert | 1.3.6.1.4.1.9926.1.21.1.6.5 | |||
notification · current The trap definition for the CM failure to dispach configuration to ATM module. | ||||
| !geAtmNetflowRecvAlert | 1.3.6.1.4.1.9926.1.21.1.6.6 | deprecated | ||
notification · deprecated The trap definition for the Collector not receiving any Net flow longer than 5 minutes or its recovery. The possible cause for this are: router stop sending netflow, router send flow to incorrect IP or port, network disconnected, the interface of collector is down, etc.
| ||||
| !geAtmDBStorageFullAlert | 1.3.6.1.4.1.9926.1.21.1.6.7 | |||
notification · current The trap definition when the usage of DB storage is crossing threshold. | ||||
| !geAtmRtrSnmpPollingAlert | 1.3.6.1.4.1.9926.1.21.1.6.8 | deprecated | ||
notification · deprecated The trap definition when the router has no response to the SNMP polling or its recovery.
| ||||
| !geAtmBgpMessageUpdateAlert | 1.3.6.1.4.1.9926.1.21.1.6.9 | |||
notification · current The trap definition for the number of BGP updated message of a router is crossing the boundary of threshold. The oid of BGP router IP address, severity, updated message number, and threshold, the top 3 ASN that generate BGP update messages their percentage aganist the total update messages are sent. If the number of ASN is less than 3, the OID(s) at the end won't be sent. | ||||
| !geAtmRtrCpuAlert | 1.3.6.1.4.1.9926.1.21.1.6.10 | deprecated | ||
notification · deprecated The trap sent when the CPU of the monitored router is more than the threshold defined or recovered. | ||||
| !geAtmRtrMemoryAlert | 1.3.6.1.4.1.9926.1.21.1.6.11 | deprecated | ||
notification · deprecated The trap sent when the memory usage of the monitored router is more than the threshold defined or recovered. | ||||
| !geAtmIpmiAlert | 1.3.6.1.4.1.9926.1.21.1.6.12 | deprecated | ||
notification · deprecated The trap sent when the IPMI tool generates any new SEL (system event log). | ||||
| !geAtmRaidAlert | 1.3.6.1.4.1.9926.1.21.1.6.13 | |||
notification · current The trap sent when any abnormal of RAID virtual disks is detected. | ||||
| !geAtmMPBgpMsgUpdateAlert | 1.3.6.1.4.1.9926.1.21.1.6.14 | |||
notification · current The trap definition for the number of MP-BGP updated message of a router is crossing the boundary of threshold. The oid of MP-BGP router IP address, updated message number, threshold, and the threshold status (excced high or below low) are sent. The trap receiver can tell whether the statistic value is crossing the higher or lower bound by the thresdstatus. | ||||
| !geAtmDBPurgeAlert | 1.3.6.1.4.1.9926.1.21.1.6.15 | |||
notification · current The trap definition for the DB Purge Alert is that DBM (Database Manager) encounters failure while purging the data in Database. | ||||
| !geAtmPacketDropAlert | 1.3.6.1.4.1.9926.1.21.1.6.16 | |||
notification · current The trap is sent when the number of dropped packets of a Collector within 5-minute interval is over threshold. | ||||
| !geAtmLicCapacityExceedAlert | 1.3.6.1.4.1.9926.1.21.1.6.17 | |||
notification · current The trap is sent when received packets exceed license capacity of the collector. | ||||
| !geAtmQueueFullAlert | 1.3.6.1.4.1.9926.1.21.1.6.18 | |||
notification · current The trap definition for Module sent alert when Queue has been full or recovered. | ||||
| !geAtmIpmiAlertv2 | 1.3.6.1.4.1.9926.1.21.1.6.19 | |||
notification · current The trap sent when the IPMI tool generates any new SEL (system event log). | ||||
| !geAtmRaidControllerAlert | 1.3.6.1.4.1.9926.1.21.1.6.20 | |||
notification · current The trap sent when any abnormal of RAID controller state is detected.
| ||||
| !geAtmModuleNoResponseAlert | 1.3.6.1.4.1.9926.1.21.1.6.21 | |||
notification · current The trap is sent when no response from the module. | ||||
| !geAtmModuleCpuAlert | 1.3.6.1.4.1.9926.1.21.1.6.22 | |||
notification · current The trap sent when the CPU usage of the monitored module is more than the threshold defined or recovered. | ||||
| !geAtmModuleMemoryAlert | 1.3.6.1.4.1.9926.1.21.1.6.23 | |||
notification · current The trap sent when the memory usage of the monitored module is more than the threshold defined or recovered. | ||||
| !geAtmLicExpireAlert | 1.3.6.1.4.1.9926.1.21.1.6.24 | |||
notification · current The trap is sent when existing license is about to exceed in a remaining number of days. | ||||
| !geAtmDbBackupFailedAlert | 1.3.6.1.4.1.9926.1.21.1.6.25 | |||
notification · current The trap sent when the db backup operation failed
| ||||
| !geAtmDbRestoreFailAlert | 1.3.6.1.4.1.9926.1.21.1.6.26 | |||
notification · current The trap sent when the db restore operation failed
| ||||
| !geAtmVrrpStatAlert | 1.3.6.1.4.1.9926.1.21.1.6.27 | |||
notification · current The trap definition for the appliance whose VRRP status is changed. | ||||
| !geAtmDbbackupStartAlert | 1.3.6.1.4.1.9926.1.21.1.6.28 | |||
notification · current The trap sent when the db backup operation start
| ||||
| !geAtmDbbackupEndAlert | 1.3.6.1.4.1.9926.1.21.1.6.29 | |||
notification · current The trap sent when the db backup operation end
| ||||
| !geAtmNfsStopWritingAlert | 1.3.6.1.4.1.9926.1.21.1.6.30 | |||
notification · current The trap sent when when all NFS connections stop writing for a period of time (5 minutes).
| ||||
| !geAtmSystemRebootAlert | 1.3.6.1.4.1.9926.1.21.1.6.31 | |||
notification · current The trap sent when system reboot. | ||||
| !geAtmSslExpiredAlert | 1.3.6.1.4.1.9926.1.21.1.6.32 | |||
notification · current The trap sent when system SSL certificate is about to expire. | ||||
| !geAtmLicFlowCapacityExceedAlert | 1.3.6.1.4.1.9926.1.21.1.6.33 | |||
notification · current The trap is sent when output flows exceed license capacity | ||||
| !geAtmSubModuleAlert | 1.3.6.1.4.1.9926.1.21.1.6.34 | |||
notification · current The trap definition for the sub-module whose operation status is changed. | ||||
| !geAtmCmRegisterFailAlert | 1.3.6.1.4.1.9926.1.21.1.6.35 | |||
notification · current The trap is sent when ATM module register to CM failed. | ||||
| !geAtmLicVerificationAlert | 1.3.6.1.4.1.9926.1.21.1.6.36 | |||
notification · current The trap is sent when license verification failed. | ||||
| !geAtmRtrCpuAlertV2 | 1.3.6.1.4.1.9926.1.21.1.6.37 | |||
notification · current The trap sent when the CPU of the monitored router is more than the threshold defined or recovered. | ||||
| !geAtmRtrMemoryAlertV2 | 1.3.6.1.4.1.9926.1.21.1.6.38 | |||
notification · current The trap sent when the memory usage of the monitored router is more than the threshold defined or recovered. | ||||
| !geAtmNetflowRecvAlertV2 | 1.3.6.1.4.1.9926.1.21.1.6.39 | |||
notification · current The trap definition for the Collector not receiving any Net flow longer than 5 minutes or its recovery. The possible cause for this are: router stop sending netflow, router send flow to incorrect IP or port, network disconnected, the interface of collector is down, etc.
| ||||
| !geAtmRtrSnmpPollingAlertV2 | 1.3.6.1.4.1.9926.1.21.1.6.40 | |||
notification · current The trap definition when the router has no response to the SNMP polling or its recovery.
| ||||
| !geAtmBgpPeerUpDownAlert | 1.3.6.1.4.1.9926.1.21.1.6.41 | deprecated | ||
notification · deprecated The trap definition when BGP peer disconnects with the collector.
| ||||
| !geAtmBgpRouteChangeInstableAlert | 1.3.6.1.4.1.9926.1.21.1.6.42 | |||
notification · current The trap definition when number of BGP instable route changes is over threshold. | ||||
| !geAtmBgpRouteChangeRpkiInvalidAlert | 1.3.6.1.4.1.9926.1.21.1.6.43 | |||
notification · current The trap definition when number of BGP route changes with invalid RPKI is over threshold. | ||||
| !geAtmBgpRouteUnusualAnnounceAlert | 1.3.6.1.4.1.9926.1.21.1.6.44 | |||
notification · current The trap definition when number of unusual BGP route announcements is over threshold. | ||||
| !geAtmBgpConnectionUpDownAlert | 1.3.6.1.4.1.9926.1.21.1.6.45 | |||
notification · current The trap definition when BGP peer disconnects with the collector. | ||||
| !geAtmNotifyActionClusterRoleChangeAlert | 1.3.6.1.4.1.9926.1.21.1.6.46 | |||
notification · current The trap definition when the notify-action cluster role changes. | ||||
| !geAtmLicExpireAlertV2 | 1.3.6.1.4.1.9926.1.21.1.6.47 | |||
notification · current The trap is sent when existing license is about to exceed in a remaining number of days. | ||||
| NgeAtmAnomalyNotification | 1.3.6.1.4.1.9926.1.21.1.7 | |||
| !geAtmInterfaceTrafficAnomaly | 1.3.6.1.4.1.9926.1.21.1.7.1 | |||
notification · current The trap definition for the baseline traffic anomaly.
| ||||
| !geAtmCustomerTrafficAnomaly | 1.3.6.1.4.1.9926.1.21.1.7.2 | |||
notification · current The trap definition for the Customer and Sub-Network Traffic anomaly.
| ||||
| !geAtmAppAnomaly | 1.3.6.1.4.1.9926.1.21.1.7.3 | |||
notification · current The trap definition for the Protocol-Misuse, and Application anomaly.
| ||||
| !geAtmTrafficMonitorAnomaly | 1.3.6.1.4.1.9926.1.21.1.7.4 | |||
notification · current The trap definition for the filter's Traffic Monitor anomaly.
| ||||
| !geAtmPrefixTrafficAnomaly | 1.3.6.1.4.1.9926.1.21.1.7.5 | deprecated | ||
notification · deprecated The trap definition for the Router-based Prefix Traffic anomaly.
| ||||
| !geAtmAppIpV6Anomaly | 1.3.6.1.4.1.9926.1.21.1.7.6 | |||
notification · current The trap definition for the Protocol-Misuse, and Application anomaly when the victim or attacker IP is an IPv6 address.
| ||||
| !geAtmMitigationAction | 1.3.6.1.4.1.9926.1.21.1.7.7 | |||
notification · current The trap definition for the mitigation action for specific anomaly id. | ||||
| !geAtmMitigationActionV2 | 1.3.6.1.4.1.9926.1.21.1.7.8 | |||
notification · current The trap definition for the mitigation action for specific anomaly id. | ||||
| NgeAtmAnomalyNotificationV2 | 1.3.6.1.4.1.9926.1.21.1.8 | |||
| !geAtmInterfaceTrafficAnomalyV2 | 1.3.6.1.4.1.9926.1.21.1.8.1 | deprecated | ||
notification · deprecated A geAtmInterfaceTrafficAnomalyV2 trap signifies an interface traffic anomaly event as the traffic of the monitored network interface is over the high-water mark or under the low-water mark. This trap is valid from GenieATM version 6.4.1.
| ||||
| !geAtmTrafficMonitorAnomalyV2 | 1.3.6.1.4.1.9926.1.21.1.8.2 | |||
notification · current A geAtmTrafficMonitorAnomalyV2 trap signifies a traffic anomaly event as the traffic of the monitored network resource (such as Sub-network or Filter) is over the high-water mark or under the low-water mark. This trap is valid from GenieATM version 6.4.1.
| ||||
| !geAtmHostAnomaly | 1.3.6.1.4.1.9926.1.21.1.8.3 | |||
notification · current A geAtmHostAnomaly trap signifies a host-based anomaly event as a DDoS attack or Worm scan is happening. This trap is valid from GenieATM version 6.4.1.
| ||||
| !geAtmInterfaceTrafficAnomalyV3 | 1.3.6.1.4.1.9926.1.21.1.8.4 | |||
notification · current A geAtmInterfaceTrafficAnomalyV3 trap signifies an interface traffic anomaly event as the traffic of the monitored network interface is over the high-water mark or under the low-water mark. This trap is valid from GenieATM version 7.2.1.
| ||||
Traps / Notifications
- geAtmAppAnomaly
1.3.6.1.4.1.9926.1.21.1.7.3 - geAtmAppIpV6Anomaly
1.3.6.1.4.1.9926.1.21.1.7.6 - geAtmBgpConnectionUpDownAlert
1.3.6.1.4.1.9926.1.21.1.6.45 - geAtmBgpHijackAlert
1.3.6.1.4.1.9926.1.21.1.6.3 - geAtmBgpMessageUpdateAlert
1.3.6.1.4.1.9926.1.21.1.6.9 - geAtmBgpMsgUpdateAlert
1.3.6.1.4.1.9926.1.21.1.6.4 - geAtmBgpPeerUpDownAlert
1.3.6.1.4.1.9926.1.21.1.6.41 - geAtmBgpRouteChangeInstableAlert
1.3.6.1.4.1.9926.1.21.1.6.42 - geAtmBgpRouteChangeRpkiInvalidAlert
1.3.6.1.4.1.9926.1.21.1.6.43 - geAtmBgpRouteUnusualAnnounceAlert
1.3.6.1.4.1.9926.1.21.1.6.44 - geAtmCmRegisterFailAlert
1.3.6.1.4.1.9926.1.21.1.6.35 - geAtmConfigUpdateAlert
1.3.6.1.4.1.9926.1.21.1.6.5 - geAtmCustomerTrafficAnomaly
1.3.6.1.4.1.9926.1.21.1.7.2 - geAtmDBPurgeAlert
1.3.6.1.4.1.9926.1.21.1.6.15 - geAtmDBStorageFullAlert
1.3.6.1.4.1.9926.1.21.1.6.7 - geAtmDbBackupFailedAlert
1.3.6.1.4.1.9926.1.21.1.6.25 - geAtmDbRestoreFailAlert
1.3.6.1.4.1.9926.1.21.1.6.26 - geAtmDbbackupEndAlert
1.3.6.1.4.1.9926.1.21.1.6.29 - geAtmDbbackupStartAlert
1.3.6.1.4.1.9926.1.21.1.6.28 - geAtmHostAnomaly
1.3.6.1.4.1.9926.1.21.1.8.3 - geAtmIfAlert
1.3.6.1.4.1.9926.1.21.1.6.1 - geAtmInterfaceTrafficAnomaly
1.3.6.1.4.1.9926.1.21.1.7.1 - geAtmInterfaceTrafficAnomalyV2
1.3.6.1.4.1.9926.1.21.1.8.1 - geAtmInterfaceTrafficAnomalyV3
1.3.6.1.4.1.9926.1.21.1.8.4 - geAtmIpmiAlert
1.3.6.1.4.1.9926.1.21.1.6.12 - geAtmIpmiAlertv2
1.3.6.1.4.1.9926.1.21.1.6.19 - geAtmLicCapacityExceedAlert
1.3.6.1.4.1.9926.1.21.1.6.17 - geAtmLicExpireAlert
1.3.6.1.4.1.9926.1.21.1.6.24 - geAtmLicExpireAlertV2
1.3.6.1.4.1.9926.1.21.1.6.47 - geAtmLicFlowCapacityExceedAlert
1.3.6.1.4.1.9926.1.21.1.6.33 - geAtmLicVerificationAlert
1.3.6.1.4.1.9926.1.21.1.6.36 - geAtmMPBgpMsgUpdateAlert
1.3.6.1.4.1.9926.1.21.1.6.14 - geAtmMitigationAction
1.3.6.1.4.1.9926.1.21.1.7.7 - geAtmMitigationActionV2
1.3.6.1.4.1.9926.1.21.1.7.8 - geAtmModuleAlert
1.3.6.1.4.1.9926.1.21.1.6.2 - geAtmModuleCpuAlert
1.3.6.1.4.1.9926.1.21.1.6.22 - geAtmModuleMemoryAlert
1.3.6.1.4.1.9926.1.21.1.6.23 - geAtmModuleNoResponseAlert
1.3.6.1.4.1.9926.1.21.1.6.21 - geAtmNetflowRecvAlert
1.3.6.1.4.1.9926.1.21.1.6.6 - geAtmNetflowRecvAlertV2
1.3.6.1.4.1.9926.1.21.1.6.39 - geAtmNfsStopWritingAlert
1.3.6.1.4.1.9926.1.21.1.6.30 - geAtmNotifyActionClusterRoleChangeAlert
1.3.6.1.4.1.9926.1.21.1.6.46 - geAtmPacketDropAlert
1.3.6.1.4.1.9926.1.21.1.6.16 - geAtmPrefixTrafficAnomaly
1.3.6.1.4.1.9926.1.21.1.7.5 - geAtmQueueFullAlert
1.3.6.1.4.1.9926.1.21.1.6.18 - geAtmRaidAlert
1.3.6.1.4.1.9926.1.21.1.6.13 - geAtmRaidControllerAlert
1.3.6.1.4.1.9926.1.21.1.6.20 - geAtmRtrCpuAlert
1.3.6.1.4.1.9926.1.21.1.6.10 - geAtmRtrCpuAlertV2
1.3.6.1.4.1.9926.1.21.1.6.37 - geAtmRtrMemoryAlert
1.3.6.1.4.1.9926.1.21.1.6.11 - geAtmRtrMemoryAlertV2
1.3.6.1.4.1.9926.1.21.1.6.38 - geAtmRtrSnmpPollingAlert
1.3.6.1.4.1.9926.1.21.1.6.8 - geAtmRtrSnmpPollingAlertV2
1.3.6.1.4.1.9926.1.21.1.6.40 - geAtmSslExpiredAlert
1.3.6.1.4.1.9926.1.21.1.6.32 - geAtmSubModuleAlert
1.3.6.1.4.1.9926.1.21.1.6.34 - geAtmSystemRebootAlert
1.3.6.1.4.1.9926.1.21.1.6.31 - geAtmTrafficMonitorAnomaly
1.3.6.1.4.1.9926.1.21.1.7.4 - geAtmTrafficMonitorAnomalyV2
1.3.6.1.4.1.9926.1.21.1.8.2 - geAtmVrrpStatAlert
1.3.6.1.4.1.9926.1.21.1.6.27