NMS-EPON-OLT-PON
FS.COM INCsnmptranslate -m NMS-EPON-OLT-PON -Tpsnmpwalk -v2c -c <community> -m NMS-EPON-OLT-PON <host> 1.3.6.1.4.1.52642.101.6Imports
| IF-MIB | ifDescr |
|---|---|
| NMS-OPTICAL-PORT-MIB | opIfCurrent, opIfTemperature, opIfTxPowerCurr, opIfVolt |
| NMS-SMI | nmsEPONGroup |
| RFC1155-SMI | Counter32 |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| NnmsEponOltPon | 1.3.6.1.4.1.52642.101.6 | |||
| TnmseponoltponTable | 1.3.6.1.4.1.52642.101.6.1 | NA | mandatory | |
table · not-accessible · mandatory A list of epon olt pon property table entries. | ||||
| RnmsEponOltPonEntry | 1.3.6.1.4.1.52642.101.6.1.1 | NA | mandatory | |
row · not-accessible · mandatory A collection of additional objects in the epon olt pon property table.
| ||||
| CponIfIndex | 1.3.6.1.4.1.52642.101.6.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The only diid of PON port in System. | ||||
| CllidSequenceNo | 1.3.6.1.4.1.52642.101.6.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Currnet LLID seqence number. | ||||
| ConuAuthMethod | 1.3.6.1.4.1.52642.101.6.1.1.3 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory ONU authentication method.
| ||||
| CisCheckOnuMac | 1.3.6.1.4.1.52642.101.6.1.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Check ONU MAC when registering.
| ||||
| CisPONBelongtoPSG | 1.3.6.1.4.1.52642.101.6.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Check if PON belongs to PSG.
| ||||
| CpONBelongtoPSGID | 1.3.6.1.4.1.52642.101.6.1.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory PSG ID that PON belongs to. | ||||
| CisUsingMpcpRegisteAckDelayTime | 1.3.6.1.4.1.52642.101.6.1.1.7 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory If using MPCP registe Ack delay time.
| ||||
| CmpcpRegisteAckDelayTime | 1.3.6.1.4.1.52642.101.6.1.1.8 | INTEGER (1..50) | RW | mandatory |
column · INTEGER (1..50) · read-write · mandatory MPCP registe Ack delay time,range is 1-50ms. | ||||
| CponIfAdminStatus | 1.3.6.1.4.1.52642.101.6.1.1.9 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory PON interface Administration Status.
| ||||
| CponIfInFecStatus | 1.3.6.1.4.1.52642.101.6.1.1.10 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory PON interface in FEC Status.
| ||||
| CponIfOutFecStatus | 1.3.6.1.4.1.52642.101.6.1.1.11 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory PON interface out FEC Status.
| ||||
| CponIfLaserStatus | 1.3.6.1.4.1.52642.101.6.1.1.12 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory PON interface Laser Status.
| ||||
| CisOnuDataSwitch | 1.3.6.1.4.1.52642.101.6.1.1.13 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory PON interface data exchange Status with ONU.
| ||||
| CponIfProtectedStatus | 1.3.6.1.4.1.52642.101.6.1.1.14 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory PON interface protected Status.
| ||||
| CponIfDynamicMacLearningStatus | 1.3.6.1.4.1.52642.101.6.1.1.15 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory PON interface dynamic MAC address learning Status.
| ||||
| CponIfMacACL | 1.3.6.1.4.1.52642.101.6.1.1.16 | DisplayString | RW | mandatory |
column · DisplayString · read-write · mandatory PON interface MAC address ACL. | ||||
| CponIfIpACL | 1.3.6.1.4.1.52642.101.6.1.1.17 | DisplayString | RW | mandatory |
column · DisplayString · read-write · mandatory PON interface IP address ACL. | ||||
| CfiberProtectHandInHand | 1.3.6.1.4.1.52642.101.6.1.1.18 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Fiber protect hand in hand. 1-enable,2-disable. Default is disable. | ||||
| CfiberProtectGroup | 1.3.6.1.4.1.52642.101.6.1.1.19 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Fiber protect group. The range of groupID is 0-32. 0 means disable. Default is disable. | ||||
| CsplittingRatio | 1.3.6.1.4.1.52642.101.6.1.1.20 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Fiber splits ratio, for each OLT PON port, which means the max number of ONU. | ||||
| CactiveOnuNum | 1.3.6.1.4.1.52642.101.6.1.1.21 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Currnet active ONU number. | ||||
| CinactiveOnuNum | 1.3.6.1.4.1.52642.101.6.1.1.22 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Currnet inactive ONU number. | ||||
| CllidIfindexString | 1.3.6.1.4.1.52642.101.6.1.1.23 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory Llid ports ifindex string. Seperated with comma. | ||||
| TponOpticsParameterAlarmSetTable | 1.3.6.1.4.1.52642.101.6.2 | NA | mandatory | |
table · not-accessible · mandatory A list of epon olt pon optics Parameter Alarm set table entries. | ||||
| RponOpticsParameterAlarmSetEntry | 1.3.6.1.4.1.52642.101.6.2.1 | NA | mandatory | |
row · not-accessible · mandatory A collection of additional objects in the epon olt pon optics Parameter Alarm set table.
| ||||
| CifIndex | 1.3.6.1.4.1.52642.101.6.2.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The only diid of PON port in System. | ||||
| CtxPowerAlarmUpLimitEnable | 1.3.6.1.4.1.52642.101.6.2.1.2 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Enable or disable the alarm of PON hign TX power. 1-enable, 2-disable. Default is disable.
| ||||
| CtxPowerAlarmUpLimitThreshold | 1.3.6.1.4.1.52642.101.6.2.1.3 | INTEGER (-400..82) | RW | mandatory |
column · INTEGER (-400..82) · read-write · mandatory The upper threshold of tx power alarm. The unit is 0.1DBm. The range is -400-82. Default is 82. | ||||
| CtxPowerAlarmUpLimitClearThreshold | 1.3.6.1.4.1.52642.101.6.2.1.4 | INTEGER (-400..82) | RW | mandatory |
column · INTEGER (-400..82) · read-write · mandatory The upper threshold of tx power alarm cleared. The unit is 0.1DBm. The range is -400-82. Default is 82. | ||||
| CtxPowerAlarmLowLimitEnable | 1.3.6.1.4.1.52642.101.6.2.1.5 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Enable or disable the alarm of PON low TX power. 1-enable, 2-disable. Default is disable.
| ||||
| CtxPowerAlarmLowLimitThreshold | 1.3.6.1.4.1.52642.101.6.2.1.6 | INTEGER (-400..82) | RW | mandatory |
column · INTEGER (-400..82) · read-write · mandatory The low threshold of tx power alarm. The unit is 0.1DBm. The range is -400-82. Default is -400. | ||||
| CtxPowerAlarmLowLimitClearThreshold | 1.3.6.1.4.1.52642.101.6.2.1.7 | INTEGER (-400..82) | RW | mandatory |
column · INTEGER (-400..82) · read-write · mandatory The low threshold tx power alarm cleared. The unit is 0.1DBm. The range is -400-82. Default is -400. | ||||
| CtemperatureAlarmUpLimitEnable | 1.3.6.1.4.1.52642.101.6.2.1.8 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Enable or disable the alarm of PON high temperature. 1-enable, 2-disable. Default is disable.
| ||||
| CtemperatureAlarmUpLimitThreshold | 1.3.6.1.4.1.52642.101.6.2.1.9 | INTEGER (-1280..1280) | RW | mandatory |
column · INTEGER (-1280..1280) · read-write · mandatory The upper threshold of temperature alarm. The unit is 0.1 degree. The range is -1280-1280. Default is 1280. | ||||
| CtemperatureAlarmUpLimitClearThreshold | 1.3.6.1.4.1.52642.101.6.2.1.10 | INTEGER (-1280..1280) | RW | mandatory |
column · INTEGER (-1280..1280) · read-write · mandatory The upper threshold temperature alarm cleared. The unit is 0.1 degree. The range is -1280-1280. Default is 1280. | ||||
| CtemperatureAlarmLowLimitEnable | 1.3.6.1.4.1.52642.101.6.2.1.11 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Enable or disable the alarm of PON low temperature. 1-enable, 2-disable. Default is disable.
| ||||
| CtemperatureAlarmLowLimitThreshold | 1.3.6.1.4.1.52642.101.6.2.1.12 | INTEGER (-1280..1280) | RW | mandatory |
column · INTEGER (-1280..1280) · read-write · mandatory The low threshold of temperature alarm. The unit is 0.1 degree. The range is -1280-1280. Default is -1280. | ||||
| CtemperatureAlarmLowLimitClearThreshold | 1.3.6.1.4.1.52642.101.6.2.1.13 | INTEGER (-1280..1280) | RW | mandatory |
column · INTEGER (-1280..1280) · read-write · mandatory The low threshold temperature alarm cleared. The unit is 0.1 degree. The range is -1280-1280. Default is -1280. | ||||
| CvoltageAlarmUpLimitEnable | 1.3.6.1.4.1.52642.101.6.2.1.14 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Enable or disable the alarm of PON high voltage. 1-enable, 2-disable. Default is disable.
| ||||
| CvoltageAlarmUpLimitThreshold | 1.3.6.1.4.1.52642.101.6.2.1.15 | INTEGER (0..65) | RW | mandatory |
column · INTEGER (0..65) · read-write · mandatory The upper threshold of voltage alarm. The unit is 0.1V. The range is 0-65. Default is 65. | ||||
| CvoltageAlarmUpLimitClearThreshold | 1.3.6.1.4.1.52642.101.6.2.1.16 | INTEGER (0..65) | RW | mandatory |
column · INTEGER (0..65) · read-write · mandatory The upper threshold voltage alarm cleared. The unit is 0.1V. The range is 0-65. Default is 65. | ||||
| CvoltageAlarmLowLimitEnable | 1.3.6.1.4.1.52642.101.6.2.1.17 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Enable or disable the alarm of PON low voltage. 1-enable, 2-disable. Default is disable.
| ||||
| CvoltageAlarmLowLimitThreshold | 1.3.6.1.4.1.52642.101.6.2.1.18 | INTEGER (0..65) | RW | mandatory |
column · INTEGER (0..65) · read-write · mandatory The low threshold of voltage alarm. The unit is 0.1V. The range is 0-65. Default is 0. | ||||
| CvoltageAlarmLowLimitClearThreshold | 1.3.6.1.4.1.52642.101.6.2.1.19 | INTEGER (0..65) | RW | mandatory |
column · INTEGER (0..65) · read-write · mandatory The low threshold voltage alarm cleared. The unit is 0.1V. The range is 0-65. Default is 0. | ||||
| CcurrentAlarmUpLimitEnable | 1.3.6.1.4.1.52642.101.6.2.1.20 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Enable or disable the alarm of PON high current. 1-enable, 2-disable. Default is disable.
| ||||
| CcurrentAlarmUpLimitThreshold | 1.3.6.1.4.1.52642.101.6.2.1.21 | INTEGER (0..1310) | RW | mandatory |
column · INTEGER (0..1310) · read-write · mandatory The upper threshold of current alarm. The unit is 0.1mA. The range is 0-1310. Default is 1310. | ||||
| CcurrentAlarmUpLimitClearThreshold | 1.3.6.1.4.1.52642.101.6.2.1.22 | INTEGER (0..1310) | RW | mandatory |
column · INTEGER (0..1310) · read-write · mandatory The upper threshold current alarm cleared. The unit is 0.1mA. The range is 0-1310. Default is 1310. | ||||
| CcurrentAlarmLowLimitEnable | 1.3.6.1.4.1.52642.101.6.2.1.23 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Enable or disable the alarm of PON hign TX power. 1-enable, 2-disable. Default is disable.
| ||||
| CcurrentAlarmLowLimitThreshold | 1.3.6.1.4.1.52642.101.6.2.1.24 | INTEGER (0..1310) | RW | mandatory |
column · INTEGER (0..1310) · read-write · mandatory The low threshold of current alarm. The unit is 0.1mA. The range is 0-1310. Default is 0. | ||||
| CcurrentAlarmLowLimitClearThreshold | 1.3.6.1.4.1.52642.101.6.2.1.25 | INTEGER (0..1310) | RW | mandatory |
column · INTEGER (0..1310) · read-write · mandatory The low threshold current alarm cleared. The unit is 0.1mA. The range is 0-1310. Default is 0. | ||||
| NponSfpParameterAlarmsNotifications | 1.3.6.1.4.1.52642.101.6.3 | |||
| SalarmStatus | 1.3.6.1.4.1.52642.101.6.3.1 | INTEGER | NA | mandatory |
scalar · INTEGER · not-accessible · mandatory Alarm status definition. 1-above, 2-below, 3-normal.
| ||||
| !ponSfpParameterAlarmsNotification | 1.3.6.1.4.1.52642.101.6.3.2 | |||
notification · current The agent generates this trap when olt optical module works in abnormal status or return to normal . | ||||
| NponPortMigration | 1.3.6.1.4.1.52642.101.6.4 | |||
| SponPortMigLlidSet | 1.3.6.1.4.1.52642.101.6.4.1 | OCTET STRING | WO | mandatory |
scalar · OCTET STRING · write-only · mandatory Llid ports ifindex string. Seperated with semicolon. For example, if we migrate the PON port configuration from port EPON3/1(llid:25) to port EPON3/2(llid:26), this value should be set to '25;26'. | ||||
Traps / Notifications
- ponSfpParameterAlarmsNotification
1.3.6.1.4.1.52642.101.6.3.2