STP module management.
snmptranslate -m STP-MIB -Tpsnmpwalk -v2c -c <community> -m STP-MIB <host> 1.3.6.1.4.1.13464.1.2.4.3Imports
| ADMIN-MASTER-MIB | gbnL2 |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IstpMib | 1.3.6.1.4.1.13464.1.2.4.3 | |||
identity STP module management. | ||||
| NstpMIBObjects | 1.3.6.1.4.1.13464.1.2.4.3.1 | |||
| NstpDot1dStp | 1.3.6.1.4.1.13464.1.2.4.3.1.1 | |||
| SstpDot1dStpProtocolSpecification | 1.3.6.1.4.1.13464.1.2.4.3.1.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementations will return 'ieee8021d(3)'. If future versions of the IEEE Spanning Tree Protocol are released that are incompatible with the current version a new value will be defined.
| ||||
| SstpDot1dStpPriority | 1.3.6.1.4.1.13464.1.2.4.3.1.1.2 | INTEGER (0..61440) | RW | |
scalar · INTEGER (0..61440) · read-write · current DURABLE: { 32768:all }
The value of the write-able portion of the Bridge
ID, i.e., the first two octets of the (8 octet
long) Bridge ID. The other (last) 6 octets of the
Bridge ID are given by the value of
dot1dBaseBridgeAddress.The value has to be a multiple
of 4096 | ||||
| SstpDot1dStpTimeSinceTopologyChange | 1.3.6.1.4.1.13464.1.2.4.3.1.1.3 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. | ||||
| SstpDot1dStpTopChanges | 1.3.6.1.4.1.13464.1.2.4.3.1.1.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of topology changes detected by this bridge since the management entity was last reset or initialized. | ||||
| SstpDot1dStpDesignatedRoot | 1.3.6.1.4.1.13464.1.2.4.3.1.1.5 | BridgeId | RO | |
scalar · BridgeId · read-only · current The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node. | ||||
| SstpDot1dStpRootCost | 1.3.6.1.4.1.13464.1.2.4.3.1.1.6 | Integer32 | RO | |
scalar · Integer32 · read-only · current The cost of the path to the root as seen from this bridge. | ||||
| SstpDot1dStpRootPort | 1.3.6.1.4.1.13464.1.2.4.3.1.1.7 | Integer32 | RO | |
scalar · Integer32 · read-only · current The port number of the port which offers the lowest cost path from this bridge to the root bridge. | ||||
| SstpDot1dStpMaxAge | 1.3.6.1.4.1.13464.1.2.4.3.1.1.8 | Timeout (600..4000) | RO | |
scalar · Timeout (600..4000) · read-only · current The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using. | ||||
| SstpDot1dStpHelloTime | 1.3.6.1.4.1.13464.1.2.4.3.1.1.9 | Timeout (100..1000) | RO | |
scalar · Timeout (100..1000) · read-only · current The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using. | ||||
| SstpDot1dStpHoldTime | 1.3.6.1.4.1.13464.1.2.4.3.1.1.10 | Integer32 | RO | |
scalar · Integer32 · read-only · current This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second. | ||||
| SstpDot1dStpForwardDelay | 1.3.6.1.4.1.13464.1.2.4.3.1.1.11 | Timeout (400..3000) | RO | |
scalar · Timeout (400..3000) · read-only · current This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to stpDot1dStpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.] | ||||
| SstpDot1dStpBridgeMaxAge | 1.3.6.1.4.1.13464.1.2.4.3.1.1.12 | Timeout (600..4000) | RW | |
scalar · Timeout (600..4000) · read-write · current DURABLE: { 2000:all }
The value that all bridges use for MaxAge when
this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
stpDot1dStpBridgeHelloTime. The granularity of this
timer is specified by 802.1D-1990 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds. | ||||
| SstpDot1dStpBridgeHelloTime | 1.3.6.1.4.1.13464.1.2.4.3.1.1.13 | Timeout (100..1000) | RW | |
scalar · Timeout (100..1000) · read-write · current DURABLE: { 200:all }
The value that all bridges use for HelloTime when
this bridge is acting as the root. The
granularity of this timer is specified by 802.1D-
1990 to be 1 second. An agent may return a
badValue error if a set is attempted to a value
which is not a whole number of seconds. | ||||
| SstpDot1dStpBridgeForwardDelay | 1.3.6.1.4.1.13464.1.2.4.3.1.1.14 | Timeout (400..3000) | RW | |
scalar · Timeout (400..3000) · read-write · current DURABLE: { 1500:all }
The value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
stpDot1dStpBridgeMaxAge. The granularity of this
timer is specified by 802.1D-1990 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds. | ||||
| TstpDot1dStpPortTable | 1.3.6.1.4.1.13464.1.2.4.3.1.1.15 | NA | ||
table · not-accessible · current A table that contains port-specific information for the Spanning Tree Protocol. | ||||
| RstpDot1dStpPortEntry | 1.3.6.1.4.1.13464.1.2.4.3.1.1.15.1 | NA | ||
row · not-accessible · current A list of information maintained by every port about the Spanning Tree Protocol state for that port.
| ||||
| CstpDot1dStpPort | 1.3.6.1.4.1.13464.1.2.4.3.1.1.15.1.1 | INTEGER (1..128) | RO | |
column · INTEGER (1..128) · read-only · current The port number of the port for which this entry contains Spanning Tree Protocol management information. | ||||
| CstpDot1dStpPortPriority | 1.3.6.1.4.1.13464.1.2.4.3.1.1.15.1.2 | INTEGER (0..240) | RW | |
column · INTEGER (0..240) · read-write · current DURABLE: { 128:all }
The value of the priority field which is
contained in the first (in network byte order)
octet of the (2 octet long) Port ID. The other
octet of the Port ID is given by the value of
stpDot1dStpPort.The value has to be a multiple
of 16 | ||||
| CstpDot1dStpPortState | 1.3.6.1.4.1.13464.1.2.4.3.1.1.15.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see stpDot1dStpPortEnable), this object will have a value of disabled(1).
| ||||
| CstpDot1dStpPortEnable | 1.3.6.1.4.1.13464.1.2.4.3.1.1.15.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The enabled/disabled status of the port.
| ||||
| CstpDot1dStpPortPathCost | 1.3.6.1.4.1.13464.1.2.4.3.1.1.15.1.5 | INTEGER (1..200000000) | RW | |
column · INTEGER (1..200000000) · read-write · current DURABLE: { 10:all }
The contribution of this port to the path cost of
paths towards the spanning tree root which include
this port. 802.1D-1990 recommends that the
default value of this parameter be in inverse
proportion to the speed of the attached LAN. | ||||
| CstpDot1dStpPortDesignatedRoot | 1.3.6.1.4.1.13464.1.2.4.3.1.1.15.1.6 | BridgeId | RO | |
column · BridgeId · read-only · current The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached. | ||||
| CstpDot1dStpPortDesignatedCost | 1.3.6.1.4.1.13464.1.2.4.3.1.1.15.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. | ||||
| CstpDot1dStpPortDesignatedBridge | 1.3.6.1.4.1.13464.1.2.4.3.1.1.15.1.8 | BridgeId | RO | |
column · BridgeId · read-only · current The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment. | ||||
| CstpDot1dStpPortDesignatedPort | 1.3.6.1.4.1.13464.1.2.4.3.1.1.15.1.9 | OCTET STRING (SIZE (2)) | RO | |
column · OCTET STRING (SIZE (2)) · read-only · current The Port Identifier of the port on the Designated Bridge for this port's segment. | ||||
| CstpDot1dStpPortForwardTransitions | 1.3.6.1.4.1.13464.1.2.4.3.1.1.15.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current The number of times this port has transitioned from the Learning state to the Forwarding state. | ||||
| CstpDot1dRemoteLoopDetect | 1.3.6.1.4.1.13464.1.2.4.3.1.1.15.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current The LOOP DETECT status of the port.
| ||||
| CstpDot1wRstpPortTxHoldCount | 1.3.6.1.4.1.13464.1.2.4.3.1.1.15.1.12 | INTEGER (1..255) | RW | |
column · INTEGER (1..255) · read-write · current Maximum number of BPDUs allowed to be transmitted during per helloTime | ||||
| CstpDot1wRstpPortOperP2p | 1.3.6.1.4.1.13464.1.2.4.3.1.1.15.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current The operational point-to-point status of the LAN segment attached to this port
| ||||
| CstpDot1wRstpPortOperEdge | 1.3.6.1.4.1.13464.1.2.4.3.1.1.15.1.14 | INTEGER | RO | |
column · INTEGER · read-only · current The operational value of the Edge Port parameter
| ||||
| CstpDot1wRstpPortMcheck | 1.3.6.1.4.1.13464.1.2.4.3.1.1.15.1.15 | INTEGER | RW | |
column · INTEGER · read-write · current force port into transmitting rstp packets
| ||||
| CstpDot1wRstpPortTxTcn | 1.3.6.1.4.1.13464.1.2.4.3.1.1.15.1.16 | INTEGER | RO | |
column · INTEGER · read-only · current Output statistics of TCN packets | ||||
| CstpDot1wRstpPortTxConfig | 1.3.6.1.4.1.13464.1.2.4.3.1.1.15.1.17 | INTEGER | RO | |
column · INTEGER · read-only · current Output statistics of CONFIG packets | ||||
| CstpDot1wRstpPortTxRstp | 1.3.6.1.4.1.13464.1.2.4.3.1.1.15.1.18 | INTEGER | RO | |
column · INTEGER · read-only · current Output statistics of RSTP packets | ||||
| CstpDot1wRstpPortRxTcn | 1.3.6.1.4.1.13464.1.2.4.3.1.1.15.1.19 | INTEGER | RO | |
column · INTEGER · read-only · current Input statistics of TCN packets | ||||
| CstpDot1wRstpPortRxConfig | 1.3.6.1.4.1.13464.1.2.4.3.1.1.15.1.20 | INTEGER | RO | |
column · INTEGER · read-only · current Input statistics of CONFIG packets | ||||
| CstpDot1wRstpPortRxRstp | 1.3.6.1.4.1.13464.1.2.4.3.1.1.15.1.21 | INTEGER | RO | |
column · INTEGER · read-only · current Input statistics of RSTP packets | ||||
| CstpDot1wRstpPortClear | 1.3.6.1.4.1.13464.1.2.4.3.1.1.15.1.22 | INTEGER | RW | |
column · INTEGER · read-write · current Clear port spanning-tree statistics
| ||||
| CstpDot1wRstpPortAdminP2p | 1.3.6.1.4.1.13464.1.2.4.3.1.1.15.1.23 | INTEGER | RW | |
column · INTEGER · read-write · current The administrative point-to-point status of the LAN segment attached to this port
| ||||
| CstpDot1wRstpPortAdminEdge | 1.3.6.1.4.1.13464.1.2.4.3.1.1.15.1.24 | INTEGER | RW | |
column · INTEGER · read-write · current The administrative value of the Edge Port parameter
| ||||
| SstpPropStpEnable | 1.3.6.1.4.1.13464.1.2.4.3.1.1.16 | INTEGER | RW | |
scalar · INTEGER · read-write · current DURABLE: { enabled:all }
The enabled/disabled status of STP for the bridge entity.
| ||||
| SspanOnOff | 1.3.6.1.4.1.13464.1.2.4.3.1.1.17 | INTEGER | RW | |
scalar · INTEGER · read-write · current DURABLE: { enable }
Enable/Disable Spanning Tree for the bridge.
When 'disable(2)', all ports of the device are placed in the
forwarding mode, regardless of current Spanning Tree state.
When 'enable(1)', the normal STP state transitions take place.
| ||||
| NstpDot1dStpTrap | 1.3.6.1.4.1.13464.1.2.4.3.1.1.18 | |||
| !stpDot1dStpPortBlocking | 1.3.6.1.4.1.13464.1.2.4.3.1.1.18.1 | |||
| !stpDot1dStpPortException | 1.3.6.1.4.1.13464.1.2.4.3.1.1.18.2 | |||
notification · current Port packet flood to CPU rate is too big, port exception happen.
| ||||
| !stpDot1dStpPortRecover | 1.3.6.1.4.1.13464.1.2.4.3.1.1.18.3 | |||
notification · current Port recover time pass after port encounter port CAR exception, and Port packet flood to CPU rate is normal, recover port.
| ||||
| !stpDot1dStpPortRmtLoop | 1.3.6.1.4.1.13464.1.2.4.3.1.1.18.4 | |||
| !stpDot1dStpPortRmtLoopFree | 1.3.6.1.4.1.13464.1.2.4.3.1.1.18.5 | |||
| !stpDot1dStpNewRoot | 1.3.6.1.4.1.13464.1.2.4.3.1.1.18.6 | |||
| !stpDot1dStpPortForwarding | 1.3.6.1.4.1.13464.1.2.4.3.1.1.18.7 | |||
| SstpDot1wRstpForceVersion | 1.3.6.1.4.1.13464.1.2.4.3.1.1.19 | INTEGER | RW | |
scalar · INTEGER · read-write · current which protocol mode the bridge chooses to execute ,RSTP or STP compatible
| ||||
| NstpMIBConformance | 1.3.6.1.4.1.13464.1.2.4.3.2 | |||
| NstpMIBGroups | 1.3.6.1.4.1.13464.1.2.4.3.2.1 | |||
| GstpMIBBaseGroup | 1.3.6.1.4.1.13464.1.2.4.3.2.1.1 | |||
group · current STP module groups.
| ||||
| NstpMIBCompliances | 1.3.6.1.4.1.13464.1.2.4.3.2.2 | |||
| MstpMIBCompliance | 1.3.6.1.4.1.13464.1.2.4.3.2.2.1 | |||
Traps / Notifications
- stpDot1dStpNewRoot
1.3.6.1.4.1.13464.1.2.4.3.1.1.18.6 - stpDot1dStpPortBlocking
1.3.6.1.4.1.13464.1.2.4.3.1.1.18.1 - stpDot1dStpPortException
1.3.6.1.4.1.13464.1.2.4.3.1.1.18.2 - stpDot1dStpPortForwarding
1.3.6.1.4.1.13464.1.2.4.3.1.1.18.7 - stpDot1dStpPortRecover
1.3.6.1.4.1.13464.1.2.4.3.1.1.18.3 - stpDot1dStpPortRmtLoop
1.3.6.1.4.1.13464.1.2.4.3.1.1.18.4 - stpDot1dStpPortRmtLoopFree
1.3.6.1.4.1.13464.1.2.4.3.1.1.18.5