GBNPlatformOAM-MIB
GCOM Technologies Co.,Ltd. (formerly 'GREENNET TECHNOLOGY CO.,LTD.')ADMIN Common Enterprise MIB definition.
snmptranslate -m GBNPlatformOAM-MIB -Tpsnmpwalk -v2c -c <community> -m GBNPlatformOAM-MIB <host> 1.3.6.1.4.1.13464.1.2.1.1Imports
| ADMIN-MASTER-MIB | gbnPlatform |
|---|---|
| Q-BRIDGE-MIB | PortList, dot1qStaticMulticastEntry |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IgbnPlatformOAM | 1.3.6.1.4.1.13464.1.2.1.1 | ||||||||||||||||
identity ADMIN Common Enterprise MIB definition. | |||||||||||||||||
| NgbnPlatformOAMSysIf | 1.3.6.1.4.1.13464.1.2.1.1.1 | ||||||||||||||||
| SsysIfMACAddr | 1.3.6.1.4.1.13464.1.2.1.1.1.1 | MacAddress | RW | ||||||||||||||
scalar · MacAddress · read-write · current DURABLE: { '000000000000'H }
The base (i.e., first) MAC address used by the gbn agent for its
in-band ports. | |||||||||||||||||
| SsysIfIpAddress | 1.3.6.1.4.1.13464.1.2.1.1.1.2 | IpAddress | RW | ||||||||||||||
scalar · IpAddress · read-write · current DURABLE: { '00000000'H }
The IP Address for sw0 (swEND 0); only applies after reset -
see 'gbnCommonMiscReset'. | |||||||||||||||||
| SsysIfIPGateAddress | 1.3.6.1.4.1.13464.1.2.1.1.1.3 | IpAddress | RW | ||||||||||||||
scalar · IpAddress · read-write · current DURABLE: { '00000000'H }
The default Gateway Address (i.e., next hop router) for sw0
(swEND 0); only applies after reset - see 'gbnCommonMiscReset'. | |||||||||||||||||
| SsysIfIPNetMask | 1.3.6.1.4.1.13464.1.2.1.1.1.4 | IpAddress | RW | ||||||||||||||
scalar · IpAddress · read-write · current DURABLE: { 'ffffff00'H }
The IP NetMask for sw0 (swEND 0); only applies after reset -
see 'gbnCommonMiscReset'. | |||||||||||||||||
| SsysIfIPStatus | 1.3.6.1.4.1.13464.1.2.1.1.1.5 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current This object is used to synchronize the modification of the IP parameters used by the protocol stack based on the gbnCommonIP MIB objects. This allows the user to change gbnCommonIPMACAddr, gbnCommonIPIpAddress, gbnCommonIPGateAddress, and gbnCommonIPNetMask, and then apply the changes to the unit using apply(4). If gbnCommonIPStatus returns notModified(1), no modifications were made to any gbnCommonIP MIB objects. If gbnCommonIPStatus returns modified(2), one or more objects were changed, but have not been applied. Both notModified(1) and modified(2) are read-only values; the agent returns a SNMPBADVALUE for sets using these values. Both restore(3) and apply(4) are valid SET values. If one or more of the gbnCommonIP objects were modified, the user can restore the parameters to a mirror of the NVM values using restore(3).
| |||||||||||||||||
| SsysIfBOOTPOnOff | 1.3.6.1.4.1.13464.1.2.1.1.1.7 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current DURABLE: { disable }
Enable/Disable BOOTP operation for the gbn agent.
When 'disable(2)', no BOOTPs are transmitted by the Application.
When 'enable(1)', the Application sends BOOTP requests during
system startup.
| |||||||||||||||||
| SsysIfDHCPOnOff | 1.3.6.1.4.1.13464.1.2.1.1.1.8 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current DURABLE: { disable }
Enable/Disable DHCP operation for the gbn agent.
When 'disable(2)', no DHCPs are transmitted by the Application.
When enabled, the Application sends DHCP requests during
system startup.
| |||||||||||||||||
| TsysIfManageVLANTbale | 1.3.6.1.4.1.13464.1.2.1.1.1.9 | NA | mandatory | ||||||||||||||
table · not-accessible · mandatory ManageVlan table | |||||||||||||||||
| RsysIfManageVLANEntry | 1.3.6.1.4.1.13464.1.2.1.1.1.9.1 | NA | mandatory | ||||||||||||||
| CsysIfManageVLANVid | 1.3.6.1.4.1.13464.1.2.1.1.1.9.1.1 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current ManageVLAN-ID, as an index, the maximum number is 26. | |||||||||||||||||
| CsysIfManageVLANRowStatus | 1.3.6.1.4.1.13464.1.2.1.1.1.9.1.2 | RowStatus | RW | ||||||||||||||
column · RowStatus · read-write · current ManageVLAN status | |||||||||||||||||
| NgbnPlatformOAMSystem | 1.3.6.1.4.1.13464.1.2.1.1.2 | ||||||||||||||||
| SsoftwarePlate | 1.3.6.1.4.1.13464.1.2.1.1.2.1 | DisplayString (SIZE (0..100)) | RO | ||||||||||||||
scalar · DisplayString (SIZE (0..100)) · read-only · current Software platform used by switches. | |||||||||||||||||
| SsoftwareVersion | 1.3.6.1.4.1.13464.1.2.1.1.2.2 | DisplayString (SIZE (0..100)) | RO | S2800-24T4F V100R001B01D001P003SP9 | |||||||||||||
scalar · DisplayString (SIZE (0..100)) · read-only · current Software version, the format is V100R001B02D06P03SP3 Example values from LibreNMS test devices
| |||||||||||||||||
| SsoftwareCompiledTimeE | 1.3.6.1.4.1.13464.1.2.1.1.2.3 | DisplayString (SIZE (0..100)) | RO | ||||||||||||||
scalar · DisplayString (SIZE (0..100)) · read-only · current Software Compiled time displayed in English, the format is Feburary 17 2003 15:47:00 | |||||||||||||||||
| SsoftwareCompiledTimeC | 1.3.6.1.4.1.13464.1.2.1.1.2.4 | DisplayString (SIZE (0..100)) | RO | ||||||||||||||
scalar · DisplayString (SIZE (0..100)) · read-only · current Software Compiled time displayed in Chinese, the format is 2003nian06yue18ri13dian15fen | |||||||||||||||||
| ScpuDescription | 1.3.6.1.4.1.13464.1.2.1.1.2.5 | DisplayString (SIZE (0..100)) | RO | MIPS-4KEc, 500MHz | |||||||||||||
scalar · DisplayString (SIZE (0..100)) · read-only · current System CPU description, the format is Mips 32334, 133MHz Example values from LibreNMS test devices
| |||||||||||||||||
| SsdramDescription | 1.3.6.1.4.1.13464.1.2.1.1.2.6 | DisplayString (SIZE (0..100)) | RO | ||||||||||||||
scalar · DisplayString (SIZE (0..100)) · read-only · current System Memery description, the format is 32M | |||||||||||||||||
| SflashDescription | 1.3.6.1.4.1.13464.1.2.1.1.2.7 | DisplayString (SIZE (0..100)) | RO | ||||||||||||||
scalar · DisplayString (SIZE (0..100)) · read-only · current System Flash description, the format is 4096k | |||||||||||||||||
| ShardwareVersion | 1.3.6.1.4.1.13464.1.2.1.1.2.8 | DisplayString (SIZE (0..100)) | RO | ||||||||||||||
scalar · DisplayString (SIZE (0..100)) · read-only · current Hardware version, the format is V3.0 | |||||||||||||||||
| SbootromVersion | 1.3.6.1.4.1.13464.1.2.1.1.2.9 | DisplayString (SIZE (0..100)) | RO | ||||||||||||||
scalar · DisplayString (SIZE (0..100)) · read-only · current Bootrom version, the format is V2.0 | |||||||||||||||||
| ShostName | 1.3.6.1.4.1.13464.1.2.1.1.2.10 | DisplayString (SIZE (1..128)) | RW | ||||||||||||||
scalar · DisplayString (SIZE (1..128)) · read-write · current System host name | |||||||||||||||||
| ScpuIdle | 1.3.6.1.4.1.13464.1.2.1.1.2.11 | INTEGER (0..100) | RO | 77 | |||||||||||||
scalar · INTEGER (0..100) · read-only · current The percentage of free CPU in the current system. Example values from LibreNMS test devices
| |||||||||||||||||
| SmemorySize | 1.3.6.1.4.1.13464.1.2.1.1.2.12 | Integer32 | RO | 128 | |||||||||||||
scalar · Integer32 · read-only · current The current system memory size, unit is byte. Example values from LibreNMS test devices
| |||||||||||||||||
| SmemoryIdle | 1.3.6.1.4.1.13464.1.2.1.1.2.13 | Integer32 | RO | 54 | |||||||||||||
scalar · Integer32 · read-only · current The current system free memory size, unit is byte. Example values from LibreNMS test devices
| |||||||||||||||||
| NsystemClock | 1.3.6.1.4.1.13464.1.2.1.1.2.14 | ||||||||||||||||
| SclockTime | 1.3.6.1.4.1.13464.1.2.1.1.2.14.1 | Unsigned32 | RW | ||||||||||||||
scalar · Unsigned32 · read-write · current The current calendar time in seconds. The based time is 1979/1/1. Year of the date must be the number between 2000 and 2099 | |||||||||||||||||
| StimeZoneName | 1.3.6.1.4.1.13464.1.2.1.1.2.14.2 | DisplayString (SIZE (1..32)) | RW | ||||||||||||||
scalar · DisplayString (SIZE (1..32)) · read-write · current the timezone name,1-32 letters.eg CCT(China Coast, USSR Zone 7) | |||||||||||||||||
| StimeZoneOffset | 1.3.6.1.4.1.13464.1.2.1.1.2.14.3 | Integer32 (0..86399) | RW | ||||||||||||||
scalar · Integer32 (0..86399) · read-write · current seconds between current timezone and GMT | |||||||||||||||||
| SoffsetNegFlag | 1.3.6.1.4.1.13464.1.2.1.1.2.14.4 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current earlier or latter than GMT,it is true when timeZoneOffset is negative
| |||||||||||||||||
| SproductName | 1.3.6.1.4.1.13464.1.2.1.1.2.15 | DisplayString (SIZE (1..255)) | RW | S2800-24T4F Switch Product | |||||||||||||
scalar · DisplayString (SIZE (1..255)) · read-write · current DURABLE: { 'WindRiver gbn Agent' }
The product name associated with this agent. This name is
displayed on the console screens and Web pages.Example values from LibreNMS test devices
| |||||||||||||||||
| SsystemReset | 1.3.6.1.4.1.13464.1.2.1.1.2.16 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Physically performs a hardware reset of the unit. Use with care. A 'reset(2)' resets the unit, a 'resetToDefaults(3)' resets the NVM configuration to factory defaults and then resets the unit, and 'noop(1)' does nothing. A value of 'noop(1)' is always returned for a GET operation.
| |||||||||||||||||
| SwriteConfig | 1.3.6.1.4.1.13464.1.2.1.1.2.17 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current When set to 'save(2)', config file is saved to NVM (Nonvolatile Memory). NVM save operations may be slow (e.g., erasing/writing Flash device). Consequently, all or many updates should be made before saving to NVM. Note that the SNMP set to 'save(2)' returns immediately to the caller. Gets on this object then return 'saveInProgress(3)' until the save operation completes, at which time 'noop(1)' is returned if the save operation is succeeded, otherwise 'saveFailed(4)' is returned. Consequently, a get operation always returns 'noop(1)', 'saveInProgress(3)' or 'saveFailed(4) depending on the current state and the result of the save operation. The agent returns 'badValue' for SNMPv1 or 'inconsistentValue' for SNMPv2c/v3 for a set to 'Save(2)' while the current get state is 'saveInProgress(3)'. Attempts to set this object to 'saveInProgress(3)' or 'saveFailed(4)' returns 'badValue' for SNMPv1 or 'wrongValue' for SNMPv2c/v3.
| |||||||||||||||||
| NsaveNMInterfaceConfig | 1.3.6.1.4.1.13464.1.2.1.1.2.18 | ||||||||||||||||
| SnmInterfaceId | 1.3.6.1.4.1.13464.1.2.1.1.2.18.1 | INTEGER (0..4094) | RW | ||||||||||||||
scalar · INTEGER (0..4094) · read-write · current interface id of vlan saved for nminterface configuration. | |||||||||||||||||
| SnmInterfaceIpAddress | 1.3.6.1.4.1.13464.1.2.1.1.2.18.2 | IpAddress | RW | ||||||||||||||
scalar · IpAddress · read-write · current ip address saved for nminterface configuration. | |||||||||||||||||
| SnmInterfaceNetMask | 1.3.6.1.4.1.13464.1.2.1.1.2.18.3 | IpAddress | RW | ||||||||||||||
scalar · IpAddress · read-write · current mask saved for nminterface configuration. | |||||||||||||||||
| SnmInterfaceGateAddress | 1.3.6.1.4.1.13464.1.2.1.1.2.18.4 | IpAddress | RW | ||||||||||||||
scalar · IpAddress · read-write · current gateway address saved for nminterface configuration. | |||||||||||||||||
| SwriteNMInterfaceConifig | 1.3.6.1.4.1.13464.1.2.1.1.2.18.5 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current We save the nminterface configuration through setting this Mib. When setting to 'saveNmconfig(1)', nminterface configuration is starting to be saved. At the same time the value of writeNMInterfaceConifigStatus Mib is set to 'saveInProgress(2)'. Then the value of nmInterfaceId, nmInterfaceIpAddress, nmInterfaceNetMask, nmInterfaceGateAddress will be read one by one.According to these value, the nminterface configuration is to be saved. Untill the process was over the value of writeNMInterfaceConifigStatus Mib is changed to 'saveSuccess(1)'. And if the process was ended for exception the value of writeNMInterfaceConifigStatus Mib is set to a error code from 'saveFailed(3)' to 'invalidIpOrMask(11)'.
| |||||||||||||||||
| SwriteNMInterfaceConifigStatus | 1.3.6.1.4.1.13464.1.2.1.1.2.18.6 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current Reserve the status of process in saving Nmconfig.
| |||||||||||||||||
| SprodSerialNo | 1.3.6.1.4.1.13464.1.2.1.1.2.19 | DisplayString (SIZE (1..31)) | RO | T180321D200 | |||||||||||||
scalar · DisplayString (SIZE (1..31)) · read-only · current Product Serial Number Example values from LibreNMS test devices
| |||||||||||||||||
| ScpuBusyStatus | 1.3.6.1.4.1.13464.1.2.1.1.2.20 | TruthValue | RO | ||||||||||||||
scalar · TruthValue · read-only · current CPU busy status | |||||||||||||||||
| ScpuBusyAlarmEnable | 1.3.6.1.4.1.13464.1.2.1.1.2.21 | TruthValue | RW | ||||||||||||||
scalar · TruthValue · read-write · current the enable status of cpu busy alarm.
| |||||||||||||||||
| ScpuBusyThreshold | 1.3.6.1.4.1.13464.1.2.1.1.2.22 | Integer32 | RW | ||||||||||||||
scalar · Integer32 · read-write · current CPU busy threshold. | |||||||||||||||||
| ScpuUnbusyThreshold | 1.3.6.1.4.1.13464.1.2.1.1.2.23 | Integer32 | RW | ||||||||||||||
scalar · Integer32 · read-write · current CPU unbusy threshold. | |||||||||||||||||
| NcpuStatusTrap | 1.3.6.1.4.1.13464.1.2.1.1.2.24 | ||||||||||||||||
| !cpuBusyTrap | 1.3.6.1.4.1.13464.1.2.1.1.2.24.1 | ||||||||||||||||
notification · current cpu busy trap. | |||||||||||||||||
| !cpuUnbusyTrap | 1.3.6.1.4.1.13464.1.2.1.1.2.24.2 | ||||||||||||||||
notification · current cpu unbusy trap. | |||||||||||||||||
| SdramAlarmEnable | 1.3.6.1.4.1.13464.1.2.1.1.2.25 | TruthValue | RW | ||||||||||||||
scalar · TruthValue · read-write · current the enable status of dram alarm.
| |||||||||||||||||
| SdramAlarmThreshold | 1.3.6.1.4.1.13464.1.2.1.1.2.26 | Integer32 | RW | ||||||||||||||
scalar · Integer32 · read-write · current the DRAM set alarm threshold. | |||||||||||||||||
| SdramStatus | 1.3.6.1.4.1.13464.1.2.1.1.2.27 | TruthValue | RO | ||||||||||||||
scalar · TruthValue · read-only · current DRAM Status£¨Beyond the threshold£©.
| |||||||||||||||||
| SdramUtilization | 1.3.6.1.4.1.13464.1.2.1.1.2.28 | Integer32 | RO | ||||||||||||||
scalar · Integer32 · read-only · current DRAM Utilization. | |||||||||||||||||
| NdramStatusTrap | 1.3.6.1.4.1.13464.1.2.1.1.2.29 | ||||||||||||||||
| !dramBusyTrap | 1.3.6.1.4.1.13464.1.2.1.1.2.29.1 | ||||||||||||||||
notification · current dram trap. | |||||||||||||||||
| ScopyRunSta | 1.3.6.1.4.1.13464.1.2.1.1.2.30 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current copy running-config startup-config.
| |||||||||||||||||
| ScopyStaRun | 1.3.6.1.4.1.13464.1.2.1.1.2.31 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current copy startup-config running-config.
| |||||||||||||||||
| NgbnPlatformOAMIpAccessControl | 1.3.6.1.4.1.13464.1.2.1.1.3 | ||||||||||||||||
| TipAccessControlTable | 1.3.6.1.4.1.13464.1.2.1.1.3.1 | NA | |||||||||||||||
table · not-accessible · current IP address access control table. | |||||||||||||||||
| RipAccessControlEntry | 1.3.6.1.4.1.13464.1.2.1.1.3.1.1 | NA | |||||||||||||||
row · not-accessible · current IP address access control entry. | |||||||||||||||||
| CcontrolIpAddress | 1.3.6.1.4.1.13464.1.2.1.1.3.1.1.1 | IpAddress | RO | ||||||||||||||
column · IpAddress · read-only · current The accessible ip address of the switch | |||||||||||||||||
| CcontrolIpMask | 1.3.6.1.4.1.13464.1.2.1.1.3.1.1.2 | IpAddress | RO | ||||||||||||||
column · IpAddress · read-only · current The accessible ip address mask of the switch, wildcard supports mask and unmask | |||||||||||||||||
| CcontrolTeminal | 1.3.6.1.4.1.13464.1.2.1.1.3.1.1.3 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current The client type connected to switch, snmp(1) means connecting switch by SNMP, web(2) means connecting switch by WEB, telnet(3) means connecting switch by telnet.
| |||||||||||||||||
| CcontrolStatus | 1.3.6.1.4.1.13464.1.2.1.1.3.1.1.4 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current IP address control status, active(1) means adding the ip address to list, destroy(2) means deleting the ip address from list
| |||||||||||||||||
| NgbnPlatformOAMWatchDog | 1.3.6.1.4.1.13464.1.2.1.1.4 | ||||||||||||||||
| SsoftDogProxy | 1.3.6.1.4.1.13464.1.2.1.1.4.1 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Enable/disable the soft dog.
| |||||||||||||||||
| NgbnPlatformOAMMuser | 1.3.6.1.4.1.13464.1.2.1.1.5 | ||||||||||||||||
| TmusrTable | 1.3.6.1.4.1.13464.1.2.1.1.5.1 | NA | |||||||||||||||
table · not-accessible · current A Table of usrname and Password. | |||||||||||||||||
| RmusrEntry | 1.3.6.1.4.1.13464.1.2.1.1.5.1.1 | NA | |||||||||||||||
| CmusrIndex | 1.3.6.1.4.1.13464.1.2.1.1.5.1.1.1 | Integer32 (1..8) | NA | ||||||||||||||
column · Integer32 (1..8) · not-accessible · current A simple index into 'gbnCommonUsrTable'. | |||||||||||||||||
| CmusrName | 1.3.6.1.4.1.13464.1.2.1.1.5.1.1.2 | DisplayString (SIZE (1..32)) | RW | ||||||||||||||
column · DisplayString (SIZE (1..32)) · read-write · current A simple usrname of gbnCommonUsrEntry. | |||||||||||||||||
| CmusrPassword | 1.3.6.1.4.1.13464.1.2.1.1.5.1.1.3 | DisplayString (SIZE (1..16)) | RW | ||||||||||||||
column · DisplayString (SIZE (1..16)) · read-write · current A simple password of gbnCommonUsrEntry. | |||||||||||||||||
| CmusrType | 1.3.6.1.4.1.13464.1.2.1.1.5.1.1.4 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current DURABLE: { NormalUser }
A simple UsrType into 'gbnCommonUsrTable'.
when 'NomalUser' configuration is limitted
| |||||||||||||||||
| CmusrRowStatus | 1.3.6.1.4.1.13464.1.2.1.1.5.1.1.5 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current DURABLE: { disable }
A simple RowStatus into 'gbnCommonUsrTable'.
when 'disable' the user is deleted
| |||||||||||||||||
| CmusrPwdEncrypt | 1.3.6.1.4.1.13464.1.2.1.1.5.1.1.6 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current DURABLE: { 0 }
Password in 'gbnCommonUsrTable' is in
format of clear text(0) or enrypt(7).
| |||||||||||||||||
| SmanageUserAuthenType | 1.3.6.1.4.1.13464.1.2.1.1.5.2 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Authentication method£¬1:local, 2:radius, 3:radius first£¬and then local after failed,4:tacacsplus,5:tacacsplus first, and then local after failed.
| |||||||||||||||||
| SmanageUserAuthenRadiusName | 1.3.6.1.4.1.13464.1.2.1.1.5.3 | DisplayString (SIZE (1..32)) | RW | ||||||||||||||
scalar · DisplayString (SIZE (1..32)) · read-write · current radius server name. | |||||||||||||||||
| SmanageUserAuthChallegeType | 1.3.6.1.4.1.13464.1.2.1.1.5.4 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Radius authentication method£¬1:CHAP, 2:PAP.
| |||||||||||||||||
| SmanageUserTacacsAuthor | 1.3.6.1.4.1.13464.1.2.1.1.5.5 | TruthValue | RW | ||||||||||||||
scalar · TruthValue · read-write · current authorization afer authenticastion. | |||||||||||||||||
| SmanageUserTacacsAccount | 1.3.6.1.4.1.13464.1.2.1.1.5.6 | TruthValue | RW | ||||||||||||||
scalar · TruthValue · read-write · current accounting after authorization. | |||||||||||||||||
| NgbnPlatformOAMUpDownLoad | 1.3.6.1.4.1.13464.1.2.1.1.6 | ||||||||||||||||
| SloadTftpAddress | 1.3.6.1.4.1.13464.1.2.1.1.6.1 | IpAddress | RW | ||||||||||||||
scalar · IpAddress · read-write · current DURABLE: The IP Address for the TFTP server used for downloading and/or uploading files. | |||||||||||||||||
| SloadTftpFileName | 1.3.6.1.4.1.13464.1.2.1.1.6.2 | DisplayString (SIZE (1..64)) | RW | ||||||||||||||
scalar · DisplayString (SIZE (1..64)) · read-write · current DURABLE: The TFTP file path and name. | |||||||||||||||||
| SloadType | 1.3.6.1.4.1.13464.1.2.1.1.6.3 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current DURABLE: { application }
The type of file to download or upload upon an
'gbnCommonLoadExecute'.
application:program file of the switch
configuration:configuration file,should be uploaded before
you download it.
miccode:microcode is the program file of vdsl chip.
removed during the boot Flash write operation, the agent
cannot be recovered).
| |||||||||||||||||
| SloadExecute | 1.3.6.1.4.1.13464.1.2.1.1.6.4 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Execute file download or upload procedure. A SET of this object starts the load procedure. Note that the Application and Boot images can only be downloaded. The NVM Configuration file can be uploaded and downloaded. A GET of this object will return the status of the executed operation. Use 'gbnCommonLoadExecuteStatus' to determine the status of the executed load.
| |||||||||||||||||
| SloadExecuteStatus | 1.3.6.1.4.1.13464.1.2.1.1.6.5 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current Provides status on the execute file load progress.
| |||||||||||||||||
| SloadFtpAddress | 1.3.6.1.4.1.13464.1.2.1.1.6.6 | IpAddress | RW | ||||||||||||||
scalar · IpAddress · read-write · current DURABLE: The IP Address for the FTP server used for downloading and/or uploading files. | |||||||||||||||||
| SloadFtpFileName | 1.3.6.1.4.1.13464.1.2.1.1.6.7 | DisplayString (SIZE (1..64)) | RW | ||||||||||||||
scalar · DisplayString (SIZE (1..64)) · read-write · current DURABLE: The FTP file path and name. | |||||||||||||||||
| SloadFtpUserName | 1.3.6.1.4.1.13464.1.2.1.1.6.8 | DisplayString (SIZE (1..32)) | RW | ||||||||||||||
scalar · DisplayString (SIZE (1..32)) · read-write · current DURABLE: The FTP user name. | |||||||||||||||||
| SloadFtpUserPassword | 1.3.6.1.4.1.13464.1.2.1.1.6.9 | DisplayString (SIZE (1..32)) | RW | ||||||||||||||
scalar · DisplayString (SIZE (1..32)) · read-write · current DURABLE: The FTP user password. | |||||||||||||||||
| SFtpdOnOff | 1.3.6.1.4.1.13464.1.2.1.1.6.10 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current DURABLE: { disable }
Enable/Disable Ftpd.
| |||||||||||||||||
| SFtpdAnonymousOnOff | 1.3.6.1.4.1.13464.1.2.1.1.6.11 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current DURABLE: { disable }
Enable/Disable Ftpd anonymous login.
| |||||||||||||||||
| SloadSlotID | 1.3.6.1.4.1.13464.1.2.1.1.6.12 | INTEGER (0..15) | RW | ||||||||||||||
scalar · INTEGER (0..15) · read-write · current Slot ID | |||||||||||||||||
| NgbnPlatformOAMSnmp | 1.3.6.1.4.1.13464.1.2.1.1.7 | ||||||||||||||||
| TsnmpCommunityToViewTable | 1.3.6.1.4.1.13464.1.2.1.1.7.1 | NA | |||||||||||||||
table · not-accessible · current A table of SNMPv1/v2c community string to view name mappings. | |||||||||||||||||
| RsnmpCommunityToViewEntry | 1.3.6.1.4.1.13464.1.2.1.1.7.1.1 | NA | |||||||||||||||
| CsnmpComm2ViewIndex | 1.3.6.1.4.1.13464.1.2.1.1.7.1.1.1 | Integer32 (1..8) | NA | ||||||||||||||
column · Integer32 (1..8) · not-accessible · current A simple index into 'gbnCommonCommunityToViewTable'. | |||||||||||||||||
| CsnmpComm2ViewCommName | 1.3.6.1.4.1.13464.1.2.1.1.7.1.1.2 | DisplayString (SIZE (1..20)) | RC | ||||||||||||||
column · DisplayString (SIZE (1..20)) · read-create · current DURABLE: { 'public','':all }
The SNMPv1/v2c community name string. Duplicate community
names are not allowed in this table. Note that a null string
is not a valid community name (i.e., a null string forces
'gbnCommonComm2ViewRowStatus' to 'notReady(3)'). | |||||||||||||||||
| CsnmpComm2ViewViewName | 1.3.6.1.4.1.13464.1.2.1.1.7.1.1.3 | SnmpAdminString (SIZE (1..32)) | RC | ||||||||||||||
column · SnmpAdminString (SIZE (1..32)) · read-create · current DURABLE: { 'internet':all }
At runtime (i.e., not when this object is SET), this view name
is compared to the 'vacmViewTreeFamilyViewName' in the
'vacmViewTreeFamilyTable' (see RFC2575). If a match is
found and the varbind(s) specify valid object type and instance,
the 'gbnCommonComm2ViewPermission' privilege is permitted.
Note that a null string is not a valid view name value.
Also note that the value of this object does not have to match
an existing entry in the 'vacmViewTreeFamilyTable' (if no match,
no access is allowed).
Note that the factory default value for this object is 'internet',
which allows access to the subtree under '1.3.6.1'. | |||||||||||||||||
| CsnmpComm2ViewPermission | 1.3.6.1.4.1.13464.1.2.1.1.7.1.1.4 | INTEGER | RC | ||||||||||||||
column · INTEGER · read-create · current DURABLE: { readWrite:all }
This object specifies the type of access allowed. 'readOnly(1)'
allows GET operations (i.e., GET, GET-NEXT, GET-BULK) and
'readWrite(2)' allows both GET and SET operations.
| |||||||||||||||||
| CsnmpComm2ViewRowStatus | 1.3.6.1.4.1.13464.1.2.1.1.7.1.1.5 | RowStatus | RC | ||||||||||||||
column · RowStatus · read-create · current DURABLE: This object indicates the status of this entry. A row in this table can be created using the 'createAndGo(4)' (i.e., all parameters must be valid - supplied in a single SNMP PDU or have default values) or the 'createAndWait(5)' action states. Until all parameters are valid for a conceptual row, this object is 'notReady(3)'. All parameters must be valid before this object can be set to 'active(1)'. Any object in a conceptual row can be modified independent of the value of this object (e.g., can be changed while 'active(1)'). | |||||||||||||||||
| TsnmpNotifyTypeTable | 1.3.6.1.4.1.13464.1.2.1.1.7.2 | NA | |||||||||||||||
table · not-accessible · current A table of SNMPv1/v2c notify type . | |||||||||||||||||
| RsnmpNotifyTypeEntry | 1.3.6.1.4.1.13464.1.2.1.1.7.2.1 | NA | |||||||||||||||
| CsnmpPrivateNotifyType | 1.3.6.1.4.1.13464.1.2.1.1.7.2.1.1 | DisplayString (SIZE (1..32)) | RO | ||||||||||||||
column · DisplayString (SIZE (1..32)) · read-only · current notify type. | |||||||||||||||||
| CsnmpNotifyTypeStatus | 1.3.6.1.4.1.13464.1.2.1.1.7.2.1.2 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current It signifies if the traps with corresponding notify-type can be sent.
| |||||||||||||||||
| NgbnPlatformOAMSnmpNotifyType | 1.3.6.1.4.1.13464.1.2.1.1.7.3 | ||||||||||||||||
| !snmpNotifyTypeSaveConfiguration | 1.3.6.1.4.1.13464.1.2.1.1.7.3.1 | ||||||||||||||||
notification · current A private type for traps or informs. It signifies that the SNMPv2 entity have just saved the configuration. | |||||||||||||||||
| SsnmpTrapSource | 1.3.6.1.4.1.13464.1.2.1.1.7.4 | INTEGER (0..4094) | RW | ||||||||||||||
scalar · INTEGER (0..4094) · read-write · current The id of vlan or supervlan which interface traps or informs are sent from belongs to. vlan id: 0-4094; supervlan id: 0-11. | |||||||||||||||||
| TsnmpRemoteEngineTable | 1.3.6.1.4.1.13464.1.2.1.1.7.5 | NA | |||||||||||||||
table · not-accessible · current A table of remote engine . | |||||||||||||||||
| RsnmpRemoteEngineEntry | 1.3.6.1.4.1.13464.1.2.1.1.7.5.1 | NA | |||||||||||||||
| CsnmpRemoteEngineID | 1.3.6.1.4.1.13464.1.2.1.1.7.5.1.1 | DisplayString | NA | ||||||||||||||
column · DisplayString · not-accessible · current The remote engine's id.Note that the engine id can only appear once in the table. | |||||||||||||||||
| CsnmpRemoteHostTAddr | 1.3.6.1.4.1.13464.1.2.1.1.7.5.1.2 | OCTET STRING (SIZE (6)) | RW | ||||||||||||||
column · OCTET STRING (SIZE (6)) · read-write · current The ip and port number of remote host.Note that the value including ip and port number can only appear once in the table. | |||||||||||||||||
| CsnmpDeleteRemoteEngineTableRow | 1.3.6.1.4.1.13464.1.2.1.1.7.5.1.3 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current You can delete a row by setting the value to 'deleteRow(1)'.
| |||||||||||||||||
| SsnmpTrapSourceType | 1.3.6.1.4.1.13464.1.2.1.1.7.6 | INTEGER (1..2) | RW | ||||||||||||||
scalar · INTEGER (1..2) · read-write · current The type of the interface which traps or informs are sent from. 1: vlan interface; 2: supervlan interface. | |||||||||||||||||
| NgbnPlatformOAMSntpClient | 1.3.6.1.4.1.13464.1.2.1.1.8 | ||||||||||||||||
| NgbnPlatformOAMSyslog | 1.3.6.1.4.1.13464.1.2.1.1.9 | ||||||||||||||||
| NgbnPlatformOAMPortCar | 1.3.6.1.4.1.13464.1.2.1.1.10 | ||||||||||||||||
| TportCarTable | 1.3.6.1.4.1.13464.1.2.1.1.10.1 | NA | |||||||||||||||
table · not-accessible · current A Table of port CAR. | |||||||||||||||||
| RportCarEntry | 1.3.6.1.4.1.13464.1.2.1.1.10.1.1 | NA | |||||||||||||||
| CportCarPort | 1.3.6.1.4.1.13464.1.2.1.1.10.1.1.1 | Integer32 | NA | ||||||||||||||
column · Integer32 · not-accessible · current The port number. | |||||||||||||||||
| CportCarEnable | 1.3.6.1.4.1.13464.1.2.1.1.10.1.1.2 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current The enable status of the port CAR | |||||||||||||||||
| CportDiscardBpdu | 1.3.6.1.4.1.13464.1.2.1.1.10.1.1.3 | Integer32 (0..1) | RW | ||||||||||||||
column · Integer32 (0..1) · read-write · current The enable status of the port discard BPDU | |||||||||||||||||
| CportCarRateBpdu | 1.3.6.1.4.1.13464.1.2.1.1.10.1.1.4 | Integer32 (1..128) | RW | ||||||||||||||
column · Integer32 (1..128) · read-write · current The port CAR max packet receive rate. | |||||||||||||||||
| SportCarGlobalEnable | 1.3.6.1.4.1.13464.1.2.1.1.10.2 | TruthValue | RW | ||||||||||||||
scalar · TruthValue · read-write · current The global enable status of port CAR. | |||||||||||||||||
| SportCarOpenTime | 1.3.6.1.4.1.13464.1.2.1.1.10.3 | Integer32 | RW | ||||||||||||||
scalar · Integer32 · read-write · current The closed port Re-open time. | |||||||||||||||||
| SdiscardBpdu | 1.3.6.1.4.1.13464.1.2.1.1.10.4 | Integer32 | RW | ||||||||||||||
scalar · Integer32 · read-write · current discard specific BPDU, bit 0 for STP packet, bit 1 for GVRP packet, bit 2 for GMRP packet. | |||||||||||||||||
| SportCarRate | 1.3.6.1.4.1.13464.1.2.1.1.10.5 | Integer32 | RW | ||||||||||||||
scalar · Integer32 · read-write · current The global port CAR max packet receive rate. | |||||||||||||||||
| ScpuCarRate | 1.3.6.1.4.1.13464.1.2.1.1.10.6 | INTEGER (0..10000) | RW | ||||||||||||||
scalar · INTEGER (0..10000) · read-write · current The CPU CAR max packet receive rate. value 0 is default 400/4000 pps | |||||||||||||||||
| NgbnPlatformOAMSsh | 1.3.6.1.4.1.13464.1.2.1.1.11 | ||||||||||||||||
| NgbnPlatformOAMMailalarm | 1.3.6.1.4.1.13464.1.2.1.1.12 | ||||||||||||||||
| NgbnPlatformOAMVctRun | 1.3.6.1.4.1.13464.1.2.1.1.13 | ||||||||||||||||
| TvctRunTable | 1.3.6.1.4.1.13464.1.2.1.1.13.1 | NA | |||||||||||||||
table · not-accessible · current A Table of VCT run. | |||||||||||||||||
| RvctRunEntry | 1.3.6.1.4.1.13464.1.2.1.1.13.1.1 | NA | |||||||||||||||
| CvctRunPort | 1.3.6.1.4.1.13464.1.2.1.1.13.1.1.1 | Integer32 (1..24) | NA | ||||||||||||||
column · Integer32 (1..24) · not-accessible · current The port number. | |||||||||||||||||
| CvctRunEnable | 1.3.6.1.4.1.13464.1.2.1.1.13.1.1.2 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current The enable status of the VCT run | |||||||||||||||||
| CvctAutoRunEnable | 1.3.6.1.4.1.13464.1.2.1.1.13.1.1.3 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current The enable status of the VCT auto run | |||||||||||||||||
| SvctAutoRunGlobalEnable | 1.3.6.1.4.1.13464.1.2.1.1.13.2 | TruthValue | RW | ||||||||||||||
scalar · TruthValue · read-write · current The global enable status of VCT auto run. | |||||||||||||||||
| SvctRunGlobalEnable | 1.3.6.1.4.1.13464.1.2.1.1.13.3 | TruthValue | RW | ||||||||||||||
scalar · TruthValue · read-write · current The global enable status of VCT run. | |||||||||||||||||
| NgbnPlatformOAMVctRunResult | 1.3.6.1.4.1.13464.1.2.1.1.14 | ||||||||||||||||
| TvctRunResultTable | 1.3.6.1.4.1.13464.1.2.1.1.14.1 | NA | |||||||||||||||
table · not-accessible · current A Table of VCT run result. | |||||||||||||||||
| RvctRunResultEntry | 1.3.6.1.4.1.13464.1.2.1.1.14.1.1 | NA | |||||||||||||||
row · not-accessible · current A list of VCT run result. | |||||||||||||||||
| CvctRunResultPort | 1.3.6.1.4.1.13464.1.2.1.1.14.1.1.1 | Integer32 (1..24) | NA | ||||||||||||||
column · Integer32 (1..24) · not-accessible · current The port number. | |||||||||||||||||
| CvctRunResultTxRxPairNo | 1.3.6.1.4.1.13464.1.2.1.1.14.1.1.2 | Integer32 | NA | ||||||||||||||
column · Integer32 · not-accessible · current The tx rx pair NO. | |||||||||||||||||
| CvctRunResultStatus | 1.3.6.1.4.1.13464.1.2.1.1.14.1.1.3 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current The status of the VCT run result
| |||||||||||||||||
| CvctRunResultErrorLocation | 1.3.6.1.4.1.13464.1.2.1.1.14.1.1.4 | Integer32 | RO | ||||||||||||||
column · Integer32 · read-only · current The error location of the VCT run result. length(m) | |||||||||||||||||
| NgbnPlatformOAMTelnet | 1.3.6.1.4.1.13464.1.2.1.1.15 | ||||||||||||||||
| NgbnPlatformOAMIpControl | 1.3.6.1.4.1.13464.1.2.1.1.16 | ||||||||||||||||
| SipControlTtl | 1.3.6.1.4.1.13464.1.2.1.1.16.1 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Enable/disable the ip control ttl
| |||||||||||||||||
Traps / Notifications
- cpuBusyTrap
1.3.6.1.4.1.13464.1.2.1.1.2.24.1 - cpuUnbusyTrap
1.3.6.1.4.1.13464.1.2.1.1.2.24.2 - dramBusyTrap
1.3.6.1.4.1.13464.1.2.1.1.2.29.1 - snmpNotifyTypeSaveConfiguration
1.3.6.1.4.1.13464.1.2.1.1.7.3.1