GBN Generic Layer 3 MIB definition.
snmptranslate -m GBNL3-MIB -Tpsnmpwalk -v2c -c <community> -m GBNL3-MIB <host> 1.3.6.1.4.1.13464.1.2.5.1.1Imports
| GBNL3If-MIB | gbnL3If |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IgbnL3Mib | 1.3.6.1.4.1.13464.1.2.5.1.1 | |||
identity GBN Generic Layer 3 MIB definition. | ||||
| NgbnL3IpMisc | 1.3.6.1.4.1.13464.1.2.5.1.1.1 | |||
| SgbnL3IpMiscNumLogicalPorts | 1.3.6.1.4.1.13464.1.2.5.1.1.1.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of logical ports (i.e., L2/L3 hybrid Aggregators or L3 only interfaces). For GBN, this is normally equal to the number of physical ports. | ||||
| SgbnL3IpMiscRouterId | 1.3.6.1.4.1.13464.1.2.5.1.1.1.2 | IpAddress | RW | obsolete |
scalar · IpAddress · read-write · obsolete the title of a router it is used when ospf is enable. | ||||
| SgbnL3IpMiscRoutingProtocol | 1.3.6.1.4.1.13464.1.2.5.1.1.1.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current DURABLE: { none }
The selected dynamic routing protocol.
Note that static routing is still functional even when this
object is set to none(1).
| ||||
| SgbnL3IpMiscOspfv2Config | 1.3.6.1.4.1.13464.1.2.5.1.1.1.4 | OCTET STRING (SIZE (0..4096)) | RO | obsolete |
scalar · OCTET STRING (SIZE (0..4096)) · read-only · obsolete This object is used for retrieving the RFC1850 Open Shortest Path First version 2 (OSPFv2) nonvolatile (NVM) configuration data in an ASCII character string format. | ||||
| SgbnL3IpMiscRouteECMPSupport | 1.3.6.1.4.1.13464.1.2.5.1.1.1.5 | TruthValue | RO | |
scalar · TruthValue · read-only · current This object is used for indicating whether ecmp route is supported. | ||||
| SgbnL3IpMiscRouteECMPCount | 1.3.6.1.4.1.13464.1.2.5.1.1.1.6 | Integer32 | RO | |
scalar · Integer32 · read-only · current This object is used for indicating the max number of a ecmp route. when value is 1, means no ecmp. | ||||
| SgbnL3IpMiscRouteWCMPSupport | 1.3.6.1.4.1.13464.1.2.5.1.1.1.7 | TruthValue | RO | |
scalar · TruthValue · read-only · current This object is used for indicating whether wcmp route is supported. | ||||
| NgbnL3IpSubnet | 1.3.6.1.4.1.13464.1.2.5.1.1.2 | |||
| SgbnL3IpSubnetMaxRows | 1.3.6.1.4.1.13464.1.2.5.1.1.2.1 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current The maximum possible number of rows in the 'gbnL3IpSubnetTable'. | ||||
| SgbnL3IpSubnetCurrentRows | 1.3.6.1.4.1.13464.1.2.5.1.1.2.2 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current The current number of rows in the 'gbnL3IpSubnetTable'. | ||||
| TgbnL3IpSubnetTable | 1.3.6.1.4.1.13464.1.2.5.1.1.2.3 | NA | ||
table · not-accessible · current A table of subnet parameters. There is one entry available for each of the 'gbnL3IpSubnetMaxRows' supported IP subnets. | ||||
| RgbnL3IpSubnetEntry | 1.3.6.1.4.1.13464.1.2.5.1.1.2.3.1 | NA | ||
row · not-accessible · current A list of subnet parameters. | ||||
| CgbnL3IpSubnetIfIndex | 1.3.6.1.4.1.13464.1.2.5.1.1.2.3.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current DURABLE: The ifIndex of the swEND driver associated with this subnet. | ||||
| CgbnL3IpSubnetAgentIpAddr | 1.3.6.1.4.1.13464.1.2.5.1.1.2.3.1.2 | IpAddress | NA | |
column · IpAddress · not-accessible · current DURABLE: The network management station uses this IP Address to talk with the Agent on this subnet. This IP address logically AND'ed with 'gbnL3IpSubnetMask' yields the actual subnet value for this subnet. | ||||
| CgbnL3IpSubnetMask | 1.3.6.1.4.1.13464.1.2.5.1.1.2.3.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current DURABLE: The subnet mask for this subnet. It contains 1's in the bit positions for the net and subnet IDs and 0's in the bit positions for host ID. The 1's must be contiguous, starting with the left most bit. | ||||
| CgbnL3IpSubnetVidIface | 1.3.6.1.4.1.13464.1.2.5.1.1.2.3.1.4 | Integer32 (0..4094) | RC | |
column · Integer32 (0..4094) · read-create · current DURABLE: { default=0:all }
For a L2/L3 hybrid switch, this object contains the actual
VLAN ID (VID) from 1 to 4094 or 0 if the VID is unassigned.
For a L3 only switch, this object contains the actual switch
interface from 1 to 4094 or 0 if unassigned.
Changing this object for this row causes all rows with the same
'gbnL3IpSubnetIfIndex' as this row to be changed to this new
'gbnL3IpSubnetVidIface' value. | ||||
| CgbnL3IpSubnetName | 1.3.6.1.4.1.13464.1.2.5.1.1.2.3.1.5 | DisplayString (SIZE (0..16)) | RC | |
column · DisplayString (SIZE (0..16)) · read-create · current DURABLE: { '':all )
A user reference name for this subnet. | ||||
| CgbnL3IpSubnetRowStatus | 1.3.6.1.4.1.13464.1.2.5.1.1.2.3.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current DURABLE: This object indicates the status of this entry. A row in this table must be created using the createAndWait(5) action state (i.e., createAndGo(4) is not supported). This object can only be set to active(1) after all objects for this row are valid. The 'gbnL3IpSubnetName' is optional. Note that the notInService(2) state is not supported. Objects in this table row can be changed when this object is notReady(3) or active(1). | ||||
| TgbnL3IpSubnetPrimaryIpTable | 1.3.6.1.4.1.13464.1.2.5.1.1.2.4 | NA | ||
table · not-accessible · current ×ÓÍøµÄÖ÷ipµØÖ·±í¡£ | ||||
| RgbnL3IpSubnetPrimaryIpEntry | 1.3.6.1.4.1.13464.1.2.5.1.1.2.4.1 | NA | ||
| CgbnL3IpSubnetPrimaryIpIfIndex | 1.3.6.1.4.1.13464.1.2.5.1.1.2.4.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current ½Ó¿ÚµÄË÷Òý¡£ | ||||
| CgbnL3IpSubnetPrimaryIpIpAddr | 1.3.6.1.4.1.13464.1.2.5.1.1.2.4.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current ½Ó¿ÚµÄÖ÷ipµØÖ·¡£ | ||||
| NgbnL3IpStatic | 1.3.6.1.4.1.13464.1.2.5.1.1.3 | |||
| SgbnL3IpStaticMaxHwHosts | 1.3.6.1.4.1.13464.1.2.5.1.1.3.1 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current The maximum number, if any, of hosts that the hardware can support in its routing table. Note that if the hardware supports both hosts and subnets in the same table, this number represents both and 'gbnL3IpStaticMaxHwSubnets' is zero (0). | ||||
| SgbnL3IpStaticNumStaticHwHosts | 1.3.6.1.4.1.13464.1.2.5.1.1.3.2 | Unsigned32 | RW | |
scalar · Unsigned32 · read-write · current DURABLE: The number of 'gbnL3IpStaticMaxHwHosts' hosts that the user would like to reserve for static routes. A SNMPv1 badValue or SNMPv2 wrongValue is returned if the user attempts to use a value less than zero or greater than 'gbnL3IpStaticMaxHwHosts'. WARNING: This value is only used during system initialization (i.e., after a reset). | ||||
| SgbnL3IpStaticMaxHwSubnets | 1.3.6.1.4.1.13464.1.2.5.1.1.3.3 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current The maximum number, if any, of subnets that the hardware can support in its routing table. Note that if the hardware supports both hosts and subnets in the same table, this value is zero (0). | ||||
| SgbnL3IpStaticNumStaticHwSubnets | 1.3.6.1.4.1.13464.1.2.5.1.1.3.4 | Unsigned32 | RW | |
scalar · Unsigned32 · read-write · current DURABLE: The number of 'gbnL3IpStaticMaxHwSubnets' subnets that the user would like to reserve for static routes. An A SNMPv1 badValue or SNMPv2 wrongValue is returned if the user attempts to use a value less than zero or greater than 'gbnL3IpStaticMaxHwSubnets'. WARNING: This value is only used during system initialization (i.e., after a reset). | ||||
| SgbnL3IpStaticRouteMaxRows | 1.3.6.1.4.1.13464.1.2.5.1.1.3.5 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current The maximum possible number of rows in the 'gbnL3IpStaticRouteTable'. | ||||
| SgbnL3IpStaticRouteCurrentRows | 1.3.6.1.4.1.13464.1.2.5.1.1.3.6 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current The current number of rows in the 'gbnL3IpStaticRouteTable'. | ||||
| TgbnL3IpStaticRouteTable | 1.3.6.1.4.1.13464.1.2.5.1.1.3.7 | NA | ||
table · not-accessible · current A table of static routes. | ||||
| RgbnL3IpStaticRouteEntry | 1.3.6.1.4.1.13464.1.2.5.1.1.3.7.1 | NA | ||
row · not-accessible · current A list of static route parameters. | ||||
| CgbnL3IpStaticDestIpAddr | 1.3.6.1.4.1.13464.1.2.5.1.1.3.7.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current DURABLE: The static route host or subnet IP destination address. All IP destination addresses must be non-zero. | ||||
| CgbnL3IpStaticMask | 1.3.6.1.4.1.13464.1.2.5.1.1.3.7.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current DURABLE: The mask for this IP destination. It contains 1's in the bit positions for the net and subnet IDs and 0's in the bit positions for host ID. The 1's must be contiguous, starting with the left most bit. Note that a host route uses a 255.255.255.255 mask. | ||||
| CgbnL3IpStaticNextHop | 1.3.6.1.4.1.13464.1.2.5.1.1.3.7.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.) | ||||
| CgbnL3IpStaticName | 1.3.6.1.4.1.13464.1.2.5.1.1.3.7.1.4 | DisplayString (SIZE (0..16)) | RC | |
column · DisplayString (SIZE (0..16)) · read-create · current DURABLE: { '':all )
A user reference name for this Static Route. | ||||
| CgbnL3IpStaticUseHw | 1.3.6.1.4.1.13464.1.2.5.1.1.3.7.1.5 | TruthValue | RC | |
column · TruthValue · read-create · current DURABLE: { false:all )
By setting this object to true(1), the user indicates the
desire to use hardware routing for this entry. To disable
hardware routing for this entry, set this object to false(2).
If the underlying switch fabric does not support hardware
routing, this object is ignored.
There is usually limited space in the hardware routing table.
Consequently, if the user enables hardware routing on 'too'
many entries, the agent assigns routes on a first come, first
serve basis (i.e., the user may not get the expected results). | ||||
| CgbnL3IpStaticInHw | 1.3.6.1.4.1.13464.1.2.5.1.1.3.7.1.6 | TruthValue | RO | |
column · TruthValue · read-only · current If this object is true(1), this static route is actually in the hardware Route Table. Otherwise it is false(2). | ||||
| CgbnL3IpStaticGateway | 1.3.6.1.4.1.13464.1.2.5.1.1.3.7.1.7 | TruthValue | RC | |
column · TruthValue · read-create · current DURABLE: { false:all )
By setting this object to true(1), the user indicates that this
subnet route is a gateway route (i.e., connected to external
router). By setting it to false(2), the user indicates that this
is a direct route. If 'gbnL3IpStaticMask' is '255.255.255.255'
(i.e., a host route) for this entry, this object cannot be set
to true(1). | ||||
| CgbnL3IpStaticRowStatus | 1.3.6.1.4.1.13464.1.2.5.1.1.3.7.1.8 | RowStatus | RC | |
column · RowStatus · read-create · current DURABLE: This object indicates the status of this entry. A row in this table must be created using the createAndWait(5) action state (i.e., createAndGo(4) is not supported). This object can only be set to active(1) after all objects for this row are valid. The 'gbnL3IpStaticName' is optional. Note that the notInService(2) state is not supported. Objects in this table row can be changed when this object is notReady(3) or active(1). | ||||
| CgbnL3IpStaticVrId | 1.3.6.1.4.1.13464.1.2.5.1.1.3.7.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current DURABLE: virtual router index this route belongs to.when not support vrf,it value is always 0. | ||||
| CgbnL3IpStaticECMPIndex | 1.3.6.1.4.1.13464.1.2.5.1.1.3.7.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current DURABLE: ECMP route index.when device dose not support ECMP,it's value must be 0. | ||||
| CgbnL3IpStaticWCMPWeight | 1.3.6.1.4.1.13464.1.2.5.1.1.3.7.1.11 | Integer32 | RC | |
column · Integer32 · read-create · current DURABLE: WCMP route weight.value range 1~(gbnL3IpMiscRouteECMPCount - 1).default value is 1,means ecmp. change this for wcmp,but all wcmp route's sum can not exceed gbnL3IpMiscRouteECMPCount. | ||||
| NgbnL3IpRoute | 1.3.6.1.4.1.13464.1.2.5.1.1.5 | |||
| SgbnL3IpRouteTableCurrentSwEntries | 1.3.6.1.4.1.13464.1.2.5.1.1.5.1 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current The number of current entries in the software Routing Table. | ||||
| SgbnL3IpRouteCurrentHwHosts | 1.3.6.1.4.1.13464.1.2.5.1.1.5.2 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current The number of hardware host routing table entries currently in use. If the hardware does not have routing table support, this value is zero (0). If the hardware supports both hosts and subnets in the same table, this number represents both and 'gbnL3IpRouteCurrentHwSubnets' is zero (0). | ||||
| SgbnL3IpRouteCurrentHwSubnets | 1.3.6.1.4.1.13464.1.2.5.1.1.5.3 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current The number of hardware subnet routing table entries currently in use. If the hardware does not have routing table support, this value is zero (0). Note that if the hardware supports both hosts and subnets in the same table, this value is zero (0). | ||||
| TgbnL3IpRouteTable | 1.3.6.1.4.1.13464.1.2.5.1.1.5.4 | NA | ||
table · not-accessible · current Provides Routing Table access. This table can be used to modify or add Routing Table entries. Changes made with this table are not saved to NVM (nonvolatile memory). To save static routes to NVM, use the gbnL3IpStaticRouteTable. | ||||
| RgbnL3IpRouteEntry | 1.3.6.1.4.1.13464.1.2.5.1.1.5.4.1 | NA | ||
row · not-accessible · current Provides enough routing information to support the UNIX style 'netstat -nr' command and to support maintenance of the Routing Table. | ||||
| CgbnL3IpRouteDest | 1.3.6.1.4.1.13464.1.2.5.1.1.5.4.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use. | ||||
| CgbnL3IpRouteMask | 1.3.6.1.4.1.13464.1.2.5.1.1.5.4.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the gbnL3IpRouteDest field. If the value of the gbnL3IpRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism. | ||||
| CgbnL3IpRouteNextHopIp | 1.3.6.1.4.1.13464.1.2.5.1.1.5.4.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.) | ||||
| CgbnL3IpRouteNextHopMac | 1.3.6.1.4.1.13464.1.2.5.1.1.5.4.1.4 | MacAddress | RO | |
column · MacAddress · read-only · current The six byte MAC address of the next hop of this route. If the underlying hardware does not support this object, an octet string of zero length is returned. | ||||
| CgbnL3IpRouteIfIndex | 1.3.6.1.4.1.13464.1.2.5.1.1.5.4.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. | ||||
| CgbnL3IpRouteType | 1.3.6.1.4.1.13464.1.2.5.1.1.5.4.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP architecture. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the gbnL3IpRouteTable object. That is, it effectively disassociates the destination identified with said entry from the route identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant gbnL3IpRouteType object.
| ||||
| CgbnL3IpRouteProto | 1.3.6.1.4.1.13464.1.2.5.1.1.5.4.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.
| ||||
| CgbnL3IpRouteAge | 1.3.6.1.4.1.13464.1.2.5.1.1.5.4.1.8 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned. | ||||
| CgbnL3IpRouteMetric1 | 1.3.6.1.4.1.13464.1.2.5.1.1.5.4.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's gbnL3IpRouteProto value. If this metric is not used, its value should be set to -1. | ||||
| CgbnL3IpRouteUsingHw | 1.3.6.1.4.1.13464.1.2.5.1.1.5.4.1.10 | TruthValue | RO | |
column · TruthValue · read-only · current This object is true(1) if this route is contained in the hardware routing table; otherwise, it is false(2). | ||||
| CgbnL3IpRouteIsStatic | 1.3.6.1.4.1.13464.1.2.5.1.1.5.4.1.11 | TruthValue | RO | |
column · TruthValue · read-only · current This object is true(1) if this route is defined in the
'gbnL3IpStaticRouteTable'. This object is false(2) if this
route was created dynamically (e.g., with RIP, OSPF) or was
manually created using this table ('gbnL3IpRouteTable') or
the RFC1213 'ipRouteTable'. | ||||
| CgbnL3IpRouteFlags | 1.3.6.1.4.1.13464.1.2.5.1.1.5.4.1.12 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Not implemented. Returns '0'.
Contains the information required for a netstat-like
'Flags' field.
The flags field represents a decimal value of the flags
specified for a given route. The following is a list of
currently available flag values:
0x1 | - route is usable (that is, 'up')
0x2 | - destination is a gateway
0x4 | - host specific routing entry
0x8 | - host or net unreachable
0x10 | - created dynamically (by redirect)
0x20 | - modified dynamically (by redirect)
0x40 | - message confirmed
0x80 | - subnet mask present
0x100 | - generate new routes on use
0x200 | - external daemon resolves name
0x400 | - generated by ARP
0x800 | - manually added (static)
0x1000 | - just discard packets (during updates)
0x2000 | - modified by management protocol
0x4000 | - protocol specific routing flag
0x8000 | - protocol specific routing flag
For example, if the entry in the Routing Table has a flag
value of decimal 5, (0x1 OR'ed with 0x4), then this route
is 'up' and usable and is host-specific. | ||||
| CgbnL3IpRouteRef | 1.3.6.1.4.1.13464.1.2.5.1.1.5.4.1.13 | Gauge32 | RO | |
column · Gauge32 · read-only · current Not implemented. Returns '0'. Contains the information required for the netstat 'Ref' field, which indicates the number active uses for this route. | ||||
| CgbnL3IpRouteUse | 1.3.6.1.4.1.13464.1.2.5.1.1.5.4.1.14 | Counter32 | RO | |
column · Counter32 · read-only · current Not implemented. Returns '0'. Contains the information required for the netstat 'Use' field, which indicates the number of packets sent with this route. | ||||
| CgbnL3IpRouteRowStatus | 1.3.6.1.4.1.13464.1.2.5.1.1.5.4.1.15 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the status of this entry. A row in this table must be created using the createAndWait(5) action state (i.e., createAndGo(4) is not supported). This object can only be set to active(1) for the specified 'gbnL3IpRouteDest' index value after the 'gbnL3IpRouteMask' and 'gbnL3IpRouteNextHop' objects for this row are valid. Setting 'gbnL3IpRouteType' is optional. Note that the notInService(2) state is not supported. Objects in this table row can be changed when this object is notReady(3) or active(1). | ||||
| CgbnL3IpRouteVrId | 1.3.6.1.4.1.13464.1.2.5.1.1.5.4.1.16 | Integer32 | RO | |
column · Integer32 · read-only · current DURABLE: virtual router index this route belongs to.when not support vrf,it value is always 0. | ||||
| NgbnL3MibConformance | 1.3.6.1.4.1.13464.1.2.5.1.1.6 | |||
| NgbnL3MibGroups | 1.3.6.1.4.1.13464.1.2.5.1.1.6.1 | |||
| GgbnL3IpMiscGroup | 1.3.6.1.4.1.13464.1.2.5.1.1.6.1.1 | |||
group · current This group configures and retrieves global, miscellaneous L3 objects. | ||||
| GgbnL3IpSubnetGroup | 1.3.6.1.4.1.13464.1.2.5.1.1.6.1.2 | |||
group · current This group configures and retrieves IP subnet objects. | ||||
| GgbnL3IpStaticGroup | 1.3.6.1.4.1.13464.1.2.5.1.1.6.1.3 | |||
group · current This group configures and retrieves IP static routes.
| ||||
| GgbnL3IpRouteGroup | 1.3.6.1.4.1.13464.1.2.5.1.1.6.1.5 | |||
group · current This group configures and retrieves IP routing info.
| ||||
| NgbnL3MibCompliances | 1.3.6.1.4.1.13464.1.2.5.1.1.6.2 | |||
| MgbnL3MibCompliance | 1.3.6.1.4.1.13464.1.2.5.1.1.6.2.1 | |||
compliance · current The compliance statement. | ||||
| NgbnL3IpVr | 1.3.6.1.4.1.13464.1.2.5.1.1.7 | |||
| TgbnL3IpSubnetVrTable | 1.3.6.1.4.1.13464.1.2.5.1.1.7.1 | NA | ||
table · not-accessible · current A table of subnet vr parameters. | ||||
| RgbnL3IpSubnetVrEntry | 1.3.6.1.4.1.13464.1.2.5.1.1.7.1.1 | NA | ||
| CgbnL3IpSubnetVrIfIndex | 1.3.6.1.4.1.13464.1.2.5.1.1.7.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current DURABLE: The ifIndex of the swEND driver associated with this subnet. | ||||
| CgbnL3IpSubnetVrId | 1.3.6.1.4.1.13464.1.2.5.1.1.7.1.1.2 | Integer32 | RC | |
column · Integer32 · read-create · current DURABLE: virtual router index this ip-subnet belongs to.when not support vrf,it value is always 0. | ||||