Gbn Common Enterprise MIB definition.
snmptranslate -m GBNL2Switch-MIB -Tpsnmpwalk -v2c -c <community> -m GBNL2Switch-MIB <host> 1.3.6.1.4.1.13464.1.2.4.1Imports
| ADMIN-MASTER-MIB | gbnL2 |
|---|---|
| Q-BRIDGE-MIB | PortList, dot1qStaticMulticastEntry |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IgbnL2Switch | 1.3.6.1.4.1.13464.1.2.4.1 | |||
identity Gbn Common Enterprise MIB definition. | ||||
| NgbnL2SwitchPacket | 1.3.6.1.4.1.13464.1.2.4.1.1 | |||
| SbroadcastSuppress | 1.3.6.1.4.1.13464.1.2.4.1.1.1 | INTEGER (0..200000) | RW | |
scalar · INTEGER (0..200000) · read-write · current Rate limit Value, the maximum number of packets per second the switch should allow to receive . | ||||
| SdlfForward | 1.3.6.1.4.1.13464.1.2.4.1.1.2 | INTEGER (0..3) | RW | |
scalar · INTEGER (0..3) · read-write · current Control the flooding of dlf packets. | ||||
| TdlfForwardPortTable | 1.3.6.1.4.1.13464.1.2.4.1.1.3 | NA | ||
table · not-accessible · current A table of dlf packets port control. | ||||
| RdlfForwardPortEntry | 1.3.6.1.4.1.13464.1.2.4.1.1.3.1 | NA | ||
| CdlfForwardPort | 1.3.6.1.4.1.13464.1.2.4.1.1.3.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The port number in dlf packets table Item. | ||||
| CdlfForwardStatus | 1.3.6.1.4.1.13464.1.2.4.1.1.3.1.2 | INTEGER (0..3) | RW | |
column · INTEGER (0..3) · read-write · current The dlf packets flag Item. | ||||
| NgbnL2SwitchMac | 1.3.6.1.4.1.13464.1.2.4.1.2 | |||
| TmacAddressTable | 1.3.6.1.4.1.13464.1.2.4.1.2.1 | NA | ||
table · not-accessible · current A table of mac address . | ||||
| RmacAddressEntry | 1.3.6.1.4.1.13464.1.2.4.1.2.1.1 | NA | ||
row · not-accessible · current Table entry for mac address . | ||||
| CmacAddressMac | 1.3.6.1.4.1.13464.1.2.4.1.2.1.1.1 | MacAddress | RO | |
column · MacAddress · read-only · current The MAC address in arl table Item. | ||||
| CmacAddressVID | 1.3.6.1.4.1.13464.1.2.4.1.2.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The vlan ID in arl table Item. | ||||
| CmacAddressPort | 1.3.6.1.4.1.13464.1.2.4.1.2.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The port number in arl table Item. | ||||
| CmacAddressStatus | 1.3.6.1.4.1.13464.1.2.4.1.2.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current
| ||||
| CmacAddressStatic | 1.3.6.1.4.1.13464.1.2.4.1.2.1.1.5 | MacAddress | RO | |
column · MacAddress · read-only · current The Static MAC address in arl table Item. | ||||
| TmacLearningPortTable | 1.3.6.1.4.1.13464.1.2.4.1.2.2 | NA | ||
table · not-accessible · current A table of mac address learning port control. | ||||
| RmacLearningPortEntry | 1.3.6.1.4.1.13464.1.2.4.1.2.2.1 | NA | ||
row · not-accessible · current Table entry for mac address learning control. | ||||
| CmacAddressLearningPort | 1.3.6.1.4.1.13464.1.2.4.1.2.2.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The port number in mac address learning table Item. | ||||
| CmacAddressLearningStatus | 1.3.6.1.4.1.13464.1.2.4.1.2.2.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The mac address learning flag Item.
| ||||
| CmacAddressMaxCount | 1.3.6.1.4.1.13464.1.2.4.1.2.2.1.3 | INTEGER (0..4095) | RW | |
column · INTEGER (0..4095) · read-write · current the max mac address number of port.In some products, when macAddressLearningPort is 0, macAddressMaxCount is 0 means mac-control-learnig, others means auto-learning. | ||||
| SmacAddressLearnCount | 1.3.6.1.4.1.13464.1.2.4.1.2.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current The total number of mac-address entries including learnt or configured. | ||||
| NgbnL2SwitchMulticast | 1.3.6.1.4.1.13464.1.2.4.1.3 | |||
| SigmpSnoopEnabled | 1.3.6.1.4.1.13464.1.2.4.1.3.1 | TruthValue | RW | |
scalar · TruthValue · read-write · current DURABLE: { false }
Setting this object to true(1) enables IGMP Snooping. Setting
it to false(2) disables IGMP Snooping.
Note that IGMP Snooping can function with or without GVRP and
GMRP enabled. | ||||
| SigmpSnoopAlerts | 1.3.6.1.4.1.13464.1.2.4.1.3.2 | TruthValue | RW | |
scalar · TruthValue · read-write · current DURABLE: { false }
Setting this object to true(1) enables the IP Router Alert
Option (as defined in RFC2113) for transmitted IGMP packets.
Setting it to false(2) disables this option. | ||||
| SigmpSnoopAging | 1.3.6.1.4.1.13464.1.2.4.1.3.3 | Integer32 (10..1000000) | RW | |
scalar · Integer32 (10..1000000) · read-write · current DURABLE: { 300 }
The timeout period in seconds for aging out Multicast Groups
dynamically learned with IGMP Snooping. Note that aging operates
on a per interface per VLAN per multicast group basis. | ||||
| TigmpSnoopTable | 1.3.6.1.4.1.13464.1.2.4.1.3.4 | NA | ||
table · not-accessible · current This table, which provides IGMP Snooping information, augments the 'dot1qStaticMulticastTable' in the Q-MIB (RFC2674). | ||||
| RigmpSnoopEntry | 1.3.6.1.4.1.13464.1.2.4.1.3.4.1 | NA | ||
row · not-accessible · current Displays by VLAN, Multicast Group, and Multicast receive port the set of ports enabled to forward Multicast Group traffic as determined by the IGMP Snooping task.
| ||||
| CigmpSnoopEgressPorts | 1.3.6.1.4.1.13464.1.2.4.1.3.4.1.1 | PortList | RO | |
column · PortList · read-only · current This read-only object displays the set of ports enabled to forward specific Multicast Group traffic as determined by the IGMP Snooping task. It should be noted that the IGMP Snooping task generates a pseudo- static (i.e., not saved in NVM) port list similar to the RFC2674 Q-MIB 'dot1qStaticMulticastStaticEgressPorts' object. Consequently, a port will not be a member of 'gbnCommonIgmpSnoopEgressPorts' if it is a member of 'dot1qStaticMulticastForbiddenEgressPorts'. | ||||
| SigmpSnoopDefaultGroupPolicy | 1.3.6.1.4.1.13464.1.2.4.1.3.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current The default group learning policy when a group address is not found in IGMP Snooping white-list and black-list
| ||||
| SigmpSnoopMaxResponseTime | 1.3.6.1.4.1.13464.1.2.4.1.3.6 | Integer32 (1..100) | RW | |
scalar · Integer32 (1..100) · read-write · current The timeout period in seconds waited before determinating whether a group port should be deleted or not after received a leave packet | ||||
| TigmpSnoopPortTable | 1.3.6.1.4.1.13464.1.2.4.1.3.7 | NA | ||
table · not-accessible · current Used to config IGMP Snooping port options,such as group-limit and fast-leave. | ||||
| RigmpSnoopPortEntry | 1.3.6.1.4.1.13464.1.2.4.1.3.7.1 | NA | ||
| CigmpSnoopPort | 1.3.6.1.4.1.13464.1.2.4.1.3.7.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current Index that uniquely identifies a Ap port within igmpSnoopPortTable. | ||||
| CigmpSnoopPortFastLeave | 1.3.6.1.4.1.13464.1.2.4.1.3.7.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The fast-leave option of a IGMP Snooping port,when set a group port is deleted immediately on receiving a leave packet, otherwise a max-response-time should be waited before deleting the port.
| ||||
| CigmpSnoopPortGroupLimit | 1.3.6.1.4.1.13464.1.2.4.1.3.7.1.3 | INTEGER (0..4094) | RW | |
column · INTEGER (0..4094) · read-write · current The max number of Multicast groups a port can learn. | ||||
| CigmpSnoopPortMcastVlan | 1.3.6.1.4.1.13464.1.2.4.1.3.7.1.4 | INTEGER (0..4094) | RW | |
column · INTEGER (0..4094) · read-write · current Specify a multicast vlan for a port.IGMP report groups received on the port will be add to the multicast vlan, regardless of the vlan id indicated by the report packets, a zero vlan means no multicast vlan is used. | ||||
| TigmpSnoopGroupTable | 1.3.6.1.4.1.13464.1.2.4.1.3.8 | NA | ||
table · not-accessible · current This table is used to config IGMP Snooping white-list and black-list. | ||||
| RigmpSnoopGroupEntry | 1.3.6.1.4.1.13464.1.2.4.1.3.8.1 | NA | ||
row · not-accessible · current Entries of igmpSnoopGroupTable. | ||||
| CigmpSnoopGroupAddress | 1.3.6.1.4.1.13464.1.2.4.1.3.8.1.1 | MacAddress | NA | |
column · MacAddress · not-accessible · current An index that uniquely identifies a multicast mac-address within igmpSnoopGroupTable. | ||||
| CigmpSnoopGroupPort | 1.3.6.1.4.1.13464.1.2.4.1.3.8.1.2 | INTEGER | NA | |
column · INTEGER · not-accessible · current An index that uniquely identifies a Ap port within igmpSnoopGroupTable. | ||||
| CigmpSnoopGroupVLAN | 1.3.6.1.4.1.13464.1.2.4.1.3.8.1.3 | INTEGER (1..4094) | NA | |
column · INTEGER (1..4094) · not-accessible · current An index that uniquely identifies a VLAN ID within igmpSnoopGroupTable. | ||||
| CigmpSnoopGroupPolicy | 1.3.6.1.4.1.13464.1.2.4.1.3.8.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current This entry is used to config IGMP Snooping white-list and black-list.Policies defined in white-list and black-list are superior to that has beed defined by igmpSnoopDefaultGroupPolicy. If group is not found in white-list or black-list then 'igmpSnoopDefaultGroupPolicy' takes effect
| ||||
| ScrossVlanMulticastEnabled | 1.3.6.1.4.1.13464.1.2.4.1.3.9 | TruthValue | RW | |
scalar · TruthValue · read-write · current Setting this object to true(1) enables cross-vlan multicast. Setting it to false(2) disables cross-vlan multicast. | ||||
| TcrossVlanMulticastTable | 1.3.6.1.4.1.13464.1.2.4.1.3.10 | NA | ||
table · not-accessible · current Used to config port info of cross-vlan multicast,such as tag/untag and vlanid of tag. | ||||
| RcrossVlanMulticastEntry | 1.3.6.1.4.1.13464.1.2.4.1.3.10.1 | NA | ||
| CcrossVlanPort | 1.3.6.1.4.1.13464.1.2.4.1.3.10.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The port number. | ||||
| CcrossVlanPortTag | 1.3.6.1.4.1.13464.1.2.4.1.3.10.1.2 | TruthValue | RW | |
column · TruthValue · read-write · current Setting this object to true(1) of tag. Setting it to false(2) of untag. | ||||
| CcrossVlanPortVid | 1.3.6.1.4.1.13464.1.2.4.1.3.10.1.3 | Integer32 (1..4095) | RW | |
column · Integer32 (1..4095) · read-write · current The vlanid of tag port. | ||||
| SigmpSnoopRoutePortForward | 1.3.6.1.4.1.13464.1.2.4.1.3.11 | INTEGER | RW | |
scalar · INTEGER · read-write · current If the status is enabled, the route port can be added into the group automatically when an igmp snooping group is created . If the status is disabled, it will be not.
| ||||
| TigmpSnoopProfileTable | 1.3.6.1.4.1.13464.1.2.4.1.3.12 | NA | ||
table · not-accessible · current This table is used to config IGMP Snooping white-list and black-list. | ||||
| RigmpSnoopProfileEntry | 1.3.6.1.4.1.13464.1.2.4.1.3.12.1 | NA | ||
| CprofileId | 1.3.6.1.4.1.13464.1.2.4.1.3.12.1.1 | Integer32 (1..16) | RO | |
column · Integer32 (1..16) · read-only · current An index that uniquely identifies a profile within igmpSnoopProfileTable. | ||||
| CprofileDescription | 1.3.6.1.4.1.13464.1.2.4.1.3.12.1.2 | DisplayString (SIZE (0..32)) | RW | |
column · DisplayString (SIZE (0..32)) · read-write · current This entry is used to config profile description. | ||||
| CprofileLimit | 1.3.6.1.4.1.13464.1.2.4.1.3.12.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current This entry is used to config group learning policy in the profile.
| ||||
| CprofilePortList | 1.3.6.1.4.1.13464.1.2.4.1.3.12.1.4 | PortList | RW | |
column · PortList · read-write · current This entry is used to config ports to reference the profile. | ||||
| CprofileRowStatus | 1.3.6.1.4.1.13464.1.2.4.1.3.12.1.5 | RowStatus | RW | |
column · RowStatus · read-write · current This entry is used to create or delete a profile within igmpSnoopProfileTable.
| ||||
| TigmpSnoopProfileIpRangeTable | 1.3.6.1.4.1.13464.1.2.4.1.3.13 | NA | ||
table · not-accessible · current This table is used to config ip ranges within profiles listed in igmpSnoopProfileTable. | ||||
| RigmpSnoopProfileIpRangeEntry | 1.3.6.1.4.1.13464.1.2.4.1.3.13.1 | NA | ||
row · not-accessible · current Entries of igmpSnoopProfileIpRangeTable. | ||||
| CipRangeStartIp | 1.3.6.1.4.1.13464.1.2.4.1.3.13.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current An index that uniquely identifies a start ip address. | ||||
| CipRangeEndIp | 1.3.6.1.4.1.13464.1.2.4.1.3.13.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current An index that uniquely identifies an end ip address. | ||||
| CipRangeVlanId | 1.3.6.1.4.1.13464.1.2.4.1.3.13.1.3 | Integer32 (0..4094) | RO | |
column · Integer32 (0..4094) · read-only · current An index that uniquely identifies a vlan. | ||||
| CipRangeRowStatus | 1.3.6.1.4.1.13464.1.2.4.1.3.13.1.4 | RowStatus | RW | |
column · RowStatus · read-write · current This entry is used to create or delete an ip range within igmpSnoopProfileIpRangeTable.
| ||||
| TigmpSnoopProfileMacRangeTable | 1.3.6.1.4.1.13464.1.2.4.1.3.14 | NA | ||
table · not-accessible · current This table is used to config mac ranges within profiles listed in igmpSnoopProfileTable. | ||||
| RigmpSnoopProfileMacRangeEntry | 1.3.6.1.4.1.13464.1.2.4.1.3.14.1 | NA | ||
row · not-accessible · current Entries of igmpSnoopProfileMacRangeTable. | ||||
| CmacRangeStartMac | 1.3.6.1.4.1.13464.1.2.4.1.3.14.1.1 | MacAddress | RO | |
column · MacAddress · read-only · current An index that uniquely identifies a start mac address. | ||||
| CmacRangeEndMac | 1.3.6.1.4.1.13464.1.2.4.1.3.14.1.2 | MacAddress | RO | |
column · MacAddress · read-only · current An index that uniquely identifies an end mac address. | ||||
| CmacRangeVlanId | 1.3.6.1.4.1.13464.1.2.4.1.3.14.1.3 | Integer32 (0..4094) | RO | |
column · Integer32 (0..4094) · read-only · current An index that uniquely identifies a vlan. | ||||
| CmacRangeRowStatus | 1.3.6.1.4.1.13464.1.2.4.1.3.14.1.4 | RowStatus | RW | |
column · RowStatus · read-write · current This entry is used to create or delete a mac range within igmpSnoopProfileMacRangeTable.
| ||||
| NgbnL2SwitchVLAN | 1.3.6.1.4.1.13464.1.2.4.1.4 | |||
| TportModeTable | 1.3.6.1.4.1.13464.1.2.4.1.4.1 | NA | ||
table · not-accessible · current A Table of port mode. | ||||
| RportModeEntry | 1.3.6.1.4.1.13464.1.2.4.1.4.1.1 | NA | ||
| CportNumber | 1.3.6.1.4.1.13464.1.2.4.1.4.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current port number'. | ||||
| CportMode | 1.3.6.1.4.1.13464.1.2.4.1.4.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current type of mode
| ||||
| NgbnL2SwitchLacpGroup | 1.3.6.1.4.1.13464.1.2.4.1.5 | |||
| SchannelGroupCreate | 1.3.6.1.4.1.13464.1.2.4.1.5.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Create a channel group . | ||||
| SchannelGroupDelete | 1.3.6.1.4.1.13464.1.2.4.1.5.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Delete a channel group. Make sure there is no member in this group . | ||||
| TchannelGroupTable | 1.3.6.1.4.1.13464.1.2.4.1.5.3 | NA | ||
table · not-accessible · current A table that contains information about every Lacp channel group that is associated with this System. This table is supported in products:TiNet S3750,TiNet S3526, TiNet S3026E,TiNet S2016EI,TiNet S2024EI. | ||||
| RchannelGroupEntry | 1.3.6.1.4.1.13464.1.2.4.1.5.3.1 | NA | ||
row · not-accessible · current A list of the Lacp channel group parameters. This is indexed by the group index.
| ||||
| CchannelGroupIndex | 1.3.6.1.4.1.13464.1.2.4.1.5.3.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The Index of the Lacp Channel group. | ||||
| CchannelGroupPortList | 1.3.6.1.4.1.13464.1.2.4.1.5.3.1.2 | PortList | RW | |
column · PortList · read-write · current The complete set of ports currently associated with this Group. Each bit set in this list represents an Actor Port member of this Group. | ||||
| CchannelGroupRule | 1.3.6.1.4.1.13464.1.2.4.1.5.3.1.3 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The Rule to be applied to this Link Aggregator's Trunk Group Table. The rules are based on the following selections SrcMAC (1), means that the last three bits of the Source MAC Address are used to index the Trunk Group to get the destination port. DestMAC (2), means the last three bits of the Destination MAC Address are used to index into the Trunk Group to get the destination port. SrcXORDestMAC (3), means that the last three bits of the Source MAC Address are logically XORed with the last three bits of the Destination MAC Address and used to index into the Trunk Group to get the destination port. SrcIP (4), means the last three bits of the Source IP Address are used to index into the Trunk Group to get the destination port. DestIP (5), means the last three bits of the Destination IP Address are used to index into the Trunk Group to get the destination port. SrcXORDestIP (6), means the last three bits of the Source IP Address are logically XORed with the last three bits of the Destination IP Address and used to index into the Trunk Group to get the destination port. This rule defines the distribution algorithm applied to the aggregated link.
| ||||
| CchannelGroupRowstatus | 1.3.6.1.4.1.13464.1.2.4.1.5.3.1.4 | TruthValue | RW | |
column · TruthValue · read-write · current rowstatus of channel group. | ||||
| NgbnL2SwitchLacpPort | 1.3.6.1.4.1.13464.1.2.4.1.6 | |||
| TlacpPortModeTable | 1.3.6.1.4.1.13464.1.2.4.1.6.1 | NA | ||
table · not-accessible · current A table that contains information about every Lacp channel group that is associated with this System. This table is supported in products:TiNet S3750,TiNet S3526, TiNet S3026E,TiNet S2016EI,TiNet S2024EI. | ||||
| RlacpPortModeEntry | 1.3.6.1.4.1.13464.1.2.4.1.6.1.1 | NA | ||
row · not-accessible · current The port mode of lacp. This is indexed by the port number.
| ||||
| CportIndex | 1.3.6.1.4.1.13464.1.2.4.1.6.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The Index of the port. | ||||
| CportLacpMode | 1.3.6.1.4.1.13464.1.2.4.1.6.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The mode of the Lacp Channel group.Static:link aggregation is static configguration,and lacp protocol do not run. Active:the port in this mode can send lacp pdu active.Passive:the port in this mode just send pdu when needed.
| ||||
| CportLacpRowstatus | 1.3.6.1.4.1.13464.1.2.4.1.6.1.1.3 | TruthValue | RO | |
column · TruthValue · read-only · current rowstatus of port. | ||||
| NgbnL2SwitchMLD | 1.3.6.1.4.1.13464.1.2.4.1.7 | |||
| SmldSnoopEnabled | 1.3.6.1.4.1.13464.1.2.4.1.7.1 | TruthValue | RW | |
scalar · TruthValue · read-write · current DURABLE: { false }
Setting this object to true(1) enables MLD Snooping. Setting
it to false(2) disables MLD Snooping.
Note that MLD Snooping can function with or without GVRP and
GMRP enabled. | ||||
| SmldSnoopAlerts | 1.3.6.1.4.1.13464.1.2.4.1.7.2 | TruthValue | RW | |
scalar · TruthValue · read-write · current DURABLE: { false }
Setting this object to true(1) enables the IP Router Alert
Option (as defined in RFC2113) for transmitted MLD packets.
Setting it to false(2) disables this option. | ||||
| SmldSnoopAging | 1.3.6.1.4.1.13464.1.2.4.1.7.3 | Integer32 (10..1000000) | RW | |
scalar · Integer32 (10..1000000) · read-write · current DURABLE: { 300 }
The timeout period in seconds for aging out MLD Groups
dynamically learned with MLD Snooping. Note that aging operates
on a per interface per VLAN per multicast group basis. | ||||
| TmldSnoopTable | 1.3.6.1.4.1.13464.1.2.4.1.7.4 | NA | ||
table · not-accessible · current This table, which provides MLD Snooping information, augments the 'dot1qStaticMulticastTable' in the Q-MIB (RFC2674). | ||||
| RmldSnoopEntry | 1.3.6.1.4.1.13464.1.2.4.1.7.4.1 | NA | ||
row · not-accessible · current Displays by VLAN, MLD Group, and MLD receive port the set of ports enabled to forward MLD Group traffic as determined by the MLD Snooping task.
| ||||
| CmldSnoopEgressPorts | 1.3.6.1.4.1.13464.1.2.4.1.7.4.1.1 | PortList | RO | |
column · PortList · read-only · current This read-only object displays the set of ports enabled to forward specific MLD Group traffic as determined by the MLD Snooping task. It should be noted that the MLD Snooping task generates a pseudo- static (i.e., not saved in NVM) port list similar to the RFC2674 Q-MIB 'dot1qStaticMulticastStaticEgressPorts' object. Consequently, a port will not be a member of 'gbnCommonIgmpSnoopEgressPorts' if it is a member of 'dot1qStaticMulticastForbiddenEgressPorts'. | ||||
| SmldSnoopDefaultGroupPolicy | 1.3.6.1.4.1.13464.1.2.4.1.7.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current The default group learning policy when a group address is not found in MLD Snooping white-list and black-list
| ||||
| SmldSnoopMaxResponseTime | 1.3.6.1.4.1.13464.1.2.4.1.7.6 | Integer32 (1..100) | RW | |
scalar · Integer32 (1..100) · read-write · current The timeout period in seconds waited before determinating whether a group port should be deleted or not after received a leave packet | ||||
| TmldSnoopPortTable | 1.3.6.1.4.1.13464.1.2.4.1.7.7 | NA | ||
table · not-accessible · current Used to config MLD Snooping port options,such as group-limit and fast-leave. | ||||
| RmldSnoopPortEntry | 1.3.6.1.4.1.13464.1.2.4.1.7.7.1 | NA | ||
| CmldSnoopPort | 1.3.6.1.4.1.13464.1.2.4.1.7.7.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current Index that uniquely identifies a Ap port within mldSnoopPortTable. | ||||
| CmldSnoopPortFastLeave | 1.3.6.1.4.1.13464.1.2.4.1.7.7.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The fast-leave option of a MLD Snooping port,when set a group port is deleted immediately on receiving a leave packet, otherwise a max-response-time should be waited before deleting the port.
| ||||
| CmldSnoopPortGroupLimit | 1.3.6.1.4.1.13464.1.2.4.1.7.7.1.3 | INTEGER (0..128) | RW | |
column · INTEGER (0..128) · read-write · current The max number of MLD groups a port can learn. | ||||
| CmldSnoopPortMcastVlan | 1.3.6.1.4.1.13464.1.2.4.1.7.7.1.4 | INTEGER (0..4094) | RW | |
column · INTEGER (0..4094) · read-write · current Specify a multicast vlan for a port.MLD report groups received on the port will be add to the multicast vlan, regardless of the vlan id indicated by the report packets, a zero vlan means no multicast vlan is used. | ||||
| TmldSnoopGroupTable | 1.3.6.1.4.1.13464.1.2.4.1.7.8 | NA | ||
table · not-accessible · current This table is used to config MLD Snooping white-list and black-list. | ||||
| RmldSnoopGroupEntry | 1.3.6.1.4.1.13464.1.2.4.1.7.8.1 | NA | ||
row · not-accessible · current Entries of mldSnoopGroupTable. | ||||
| CmldSnoopGroupAddress | 1.3.6.1.4.1.13464.1.2.4.1.7.8.1.1 | MacAddress | NA | |
column · MacAddress · not-accessible · current An index that uniquely identifies a multicast mac-address within mldSnoopGroupTable. | ||||
| CmldSnoopGroupPort | 1.3.6.1.4.1.13464.1.2.4.1.7.8.1.2 | INTEGER | NA | |
column · INTEGER · not-accessible · current An index that uniquely identifies a Ap port within mldSnoopGroupTable. | ||||
| CmldSnoopGroupVLAN | 1.3.6.1.4.1.13464.1.2.4.1.7.8.1.3 | INTEGER (1..4094) | NA | |
column · INTEGER (1..4094) · not-accessible · current An index that uniquely identifies a VLAN ID within mldSnoopGroupTable. | ||||
| CmldSnoopGroupPolicy | 1.3.6.1.4.1.13464.1.2.4.1.7.8.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current This entry is used to config MLD Snooping white-list and black-list.Policies defined in white-list and black-list are superior to that has beed defined by mldSnoopDefaultGroupPolicy. If group is not found in white-list or black-list then 'mldSnoopDefaultGroupPolicy' takes effect
| ||||
| SmldSnoopRoutePortForward | 1.3.6.1.4.1.13464.1.2.4.1.7.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current If the status is enabled, the route port can be added into the group automatically when an mld snooping group is created . If the status is disabled, it will be not.
| ||||