GBN Broadcom BCM5600 StrataSwitch OEM-Product Enterprise MIB definition.
snmptranslate -m GBNDeviceOEM-MIB -Tpsnmpwalk -v2c -c <community> -m GBNDeviceOEM-MIB <host> 1.3.6.1.4.1.13464.1.2.2.3Imports
| ADMIN-MASTER-MIB | gbnDevice |
|---|---|
| Q-BRIDGE-MIB | PortList |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Ibcm5600 | 1.3.6.1.4.1.13464.1.2.2.3 | |||
identity GBN Broadcom BCM5600 StrataSwitch OEM-Product Enterprise MIB definition. | ||||
| NoemArchIface | 1.3.6.1.4.1.13464.1.2.2.3.1 | |||
| ToemArchIfaceTable | 1.3.6.1.4.1.13464.1.2.2.3.1.1 | NA | ||
table · not-accessible · current A table of switch interfaces and associated properties. | ||||
| RoemArchIfaceEntry | 1.3.6.1.4.1.13464.1.2.2.3.1.1.1 | NA | ||
row · not-accessible · current Table entry for switch interface control and status information. | ||||
| CoemArchIfaceUnit | 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.1 | Integer32 (1..4) | RO | |
column · Integer32 (1..4) · read-only · current An index that uniquely identifies a unit in the TiNet Switch stack. If an invalid value is used for the index, a SNMP 'noSuchName' error (SNMPv1) or 'noSuchInstance' exception (SNMPv2/v3) is returned. For implementations that do not support stacking, the same response is returned for any unit index other than 1. | ||||
| CoemArchIfacePort | 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.2 | Integer32 (1..26) | RO | |
column · Integer32 (1..26) · read-only · current An index that uniquely identifies a GBN Application 'logical port' (i.e., IEEE 802.3ad Aggregator) within the oemArchIfaceUnit. | ||||
| CoemArchIfaceLLWHPort | 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.3 | Integer32 (8193..8296) | RO | |
column · Integer32 (8193..8296) · read-only · current A value that uniquely identifies a GBN Application 'logical port' (i.e., IEEE 802.3ad Aggregator) in the GBN BCM5600 stack. This is a 'Layered Linear With Holes' (LLWH) port number that may may have holes for missing ports or units. For this MIB, 26 port numbers are reserved for each unit in the stack. For example, LLHW port 8193 is unit 1, port 1 . | ||||
| CoemArchIfaceIfIndex | 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The ifIndex of this GBN Application 'logical port' (i.e., IEEE 802.3ad Aggregator). Note that an ifIndex value of 34603009 (0x02100001) represents the Aggregator layer, unit 1, slot 0 (base unit ports), port 1. | ||||
| CoemArchIfaceName | 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.5 | DisplayString (SIZE (0..128)) | RW | |
column · DisplayString (SIZE (0..128)) · read-write · current DURABLE: The textual name of this interface, e.g., 'John'. | ||||
| CoemArchIfaceEnable | 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.6 | TruthValue | RW | |
column · TruthValue · read-write · current DURABLE: { true:all }
This object is true(1) when this interface is enabled and
false(1) when it is disabled. For this product, this is the
ONLY way to enable or disable this interface. Note that
'ifAdminStatus' in RFC1213 and RFC2233 and 'dot1dStpPortEnable'
in RFC1493 are each implemented as 'read-only'. | ||||
| CoemArchIfaceSTPEnable | 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.7 | TruthValue | RW | |
column · TruthValue · read-write · current DURABLE: { true:all }
This object is true(1) when Spanning Tree operation is enabled
for this interface and false(2) when it is disabled. | ||||
| CoemArchIfaceLink | 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The state of Link Detect on this interface.
| ||||
| CoemArchIfaceDuplexSpeedSet | 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current DURABLE: { autonegotiate:all }
The desired speed and duplex for this interface. If the selected
control is not possible on the interface, a value of illegal(99)
is returned. If the port type does NOT support the default
of autonegotiate(1), then the application initializes the
port to a valid value (e.g., 1000full(6)). Note that not all
controls are possible for all interfaces. For example, only
full-1000(6) is available for Gigabit Ethernet interfaces.
| ||||
| CoemArchIfaceDuplexSpeedGet | 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current The actual speed and duplex for this interface. If the interface is not configured for an acceptable value, a value of illegal(99) is returned. A value of unknown(1) is returned when the 'oemArchIfaceLink' indicates down(2) for this interface.
| ||||
| CoemArchIfacePortLoop | 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current The state of Link Detect on this interface.
| ||||
| CoemArchIfaceFlowControl | 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.12 | INTEGER | RW | |
column · INTEGER · read-write · current DURABLE: { enable }
Set the flow control on the interface to enable(1) or disable(2).
| ||||
| CoemArchIfaceTxVlanTagPkts | 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.13 | Counter64 | RO | |
column · Counter64 · read-only · current The number of VLAN tagged packets transmitted on this interface. | ||||
| CoemArchIfaceTxL3Pkts | 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.14 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Layer 3 packets transmitted on this interface. | ||||
| CoemArchIfaceTxL3AbortedPkts | 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.15 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Layer 3 transmit packets aborted on this interface. | ||||
| CoemArchIfaceRxIpInHdrErrors | 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.16 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Layer 3 packets received on this interface that were discarded due to IP header errors (e.g., bad checksum, invalid versions, format errors). | ||||
| CoemArchIfaceL2Tunneling | 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.17 | INTEGER (1..63) | RW | |
column · INTEGER (1..63) · read-write · current When l2 entities (such as STP bridges) conneted across a VPN network, l2 PDUs need delivering through VPN without being processed.To achieve this, users need enbling l2- tunneling on VPN's edge ports, i.e. ports connected to customer bridges. One 32bits width integer variable is used for each port to represent what kind of PDUs need tunneling when coming in this ports.Notes, only the six least-significant bits are used here ,each bit corresponds to one protocol, following is the detail: bit0 <----> CDP bit1 <----> LACP bit2 <----> PAGP bit3 <----> STP bit4 <----> UDLD bit5 <----> VTP bit6-bit31 <--> reserved. when set one, corresponding PDU tunneling is asserted, deasserted otherwise. | ||||
| CoemArchIfaceLinkUpTime | 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.18 | Integer32 | RO | |
column · Integer32 · read-only · current The duration of linkup on this interface. The unit is second. | ||||
| CoemArchIfaceMasterMode | 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.19 | INTEGER | RW | |
column · INTEGER · read-write · current The master/slave mode on this interface.
| ||||
| NoemChip | 1.3.6.1.4.1.13464.1.2.2.3.2 | |||
| SoemChipStub | 1.3.6.1.4.1.13464.1.2.2.3.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object is a place holder for the OEM Chip interface.
| ||||
| NoemProdConformance | 1.3.6.1.4.1.13464.1.2.2.3.3 | |||
| NoemProdGroups | 1.3.6.1.4.1.13464.1.2.2.3.3.1 | |||
| GoemArchIfaceGroup | 1.3.6.1.4.1.13464.1.2.2.3.3.1.1 | |||
group · current This group configures and retrieves Architecture interface specific objects.
| ||||
| GoemChipGroup | 1.3.6.1.4.1.13464.1.2.2.3.3.1.2 | |||
| NoemProdCompliances | 1.3.6.1.4.1.13464.1.2.2.3.3.2 | |||
| MoemProdCompliance | 1.3.6.1.4.1.13464.1.2.2.3.3.2.1 | |||