GARP Module Management
snmptranslate -m GARP-MIB -Tpsnmpwalk -v2c -c <community> -m GARP-MIB <host> 1.3.6.1.4.1.13464.1.2.4.2Imports
| ADMIN-MASTER-MIB | gbnL2 |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TimeInterval, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IgarpMib | 1.3.6.1.4.1.13464.1.2.4.2 | |||
identity GARP Module Management | ||||
| NgarpMIBObjects | 1.3.6.1.4.1.13464.1.2.4.2.1 | |||
| NgDot1qBase | 1.3.6.1.4.1.13464.1.2.4.2.1.1 | |||
| SgDot1qVlanVersionNumber | 1.3.6.1.4.1.13464.1.2.4.2.1.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The version number of IEEE 802.1Q that this device supports.
| ||||
| SgDot1qMaxVlanId | 1.3.6.1.4.1.13464.1.2.4.2.1.1.2 | VlanId | RO | |
scalar · VlanId · read-only · current The maximum IEEE 802.1Q VLAN ID that this device supports. | ||||
| SgDot1qMaxSupportedVlans | 1.3.6.1.4.1.13464.1.2.4.2.1.1.3 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current The maximum number of IEEE 802.1Q VLANs that this device supports. | ||||
| SgDot1qNumVlans | 1.3.6.1.4.1.13464.1.2.4.2.1.1.4 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current The current number of IEEE 802.1Q VLANs that are configured in this device. | ||||
| SgDot1qGvrpStatus | 1.3.6.1.4.1.13464.1.2.4.2.1.1.5 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current DURABLE: { enabled }
The administrative status requested by management for
GVRP. The value enabled(1) indicates that GVRP should
be enabled on this device, on all ports for which it has
not been specifically disabled. When disabled(2), GVRP
is disabled on all ports and all GVRP packets will be
forwarded transparently. This object affects all GVRP
Applicant and Registrar state machines. A transition
from disabled(2) to enabled(1) will cause a reset of all
GVRP state machines on all ports.
| ||||
| TgDot1qVlanIndexMappingTable | 1.3.6.1.4.1.13464.1.2.4.2.1.1.6 | NA | ||
table · not-accessible · current This table gives the mapping of linear indices to VLAN Indices. It is necessary because CCDGEN doesn't support nonlinear indices. | ||||
| RgDot1qVlanIndexMappingEntry | 1.3.6.1.4.1.13464.1.2.4.2.1.1.6.1 | NA | ||
row · not-accessible · current Each entry maps a linear index to a VLAN index.
| ||||
| CgDot1qVlanSlotIndex | 1.3.6.1.4.1.13464.1.2.4.2.1.1.6.1.1 | INTEGER (1..64) | RO | |
column · INTEGER (1..64) · read-only · current The durable slot index for this VLAN | ||||
| CgDot1qVlanSlotActualIndex | 1.3.6.1.4.1.13464.1.2.4.2.1.1.6.1.2 | VlanIndex | RO | |
column · VlanIndex · read-only · current DURABLE: { 0:all }
The actual VLAN index for this durable VLAN slot | ||||
| NgDot1qTp | 1.3.6.1.4.1.13464.1.2.4.2.1.2 | |||
| TgDot1qFdbTable | 1.3.6.1.4.1.13464.1.2.4.2.1.2.1 | NA | ||
table · not-accessible · current A table that contains configuration and control information for each Filtering Database currently operating on this device. Entries in this table appear automatically when VLANs are assigned FDB IDs in the gDot1qVlanCurrentTable. | ||||
| RgDot1qFdbEntry | 1.3.6.1.4.1.13464.1.2.4.2.1.2.1.1 | NA | ||
| CgDot1qFdbId | 1.3.6.1.4.1.13464.1.2.4.2.1.2.1.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The identity of this Filtering Database. | ||||
| CgDot1qFdbDynamicCount | 1.3.6.1.4.1.13464.1.2.4.2.1.2.1.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The current number of dynamic entries in this Filtering Database. | ||||
| TgDot1qTpFdbTable | 1.3.6.1.4.1.13464.1.2.4.2.1.2.2 | NA | ||
table · not-accessible · current A table that contains information about unicast entries for which the device has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame. | ||||
| RgDot1qTpFdbEntry | 1.3.6.1.4.1.13464.1.2.4.2.1.2.2.1 | NA | ||
row · not-accessible · current Information about a specific unicast MAC address for which the device has some forwarding and/or filtering information. | ||||
| CgDot1qTpFdbAddress | 1.3.6.1.4.1.13464.1.2.4.2.1.2.2.1.1 | MacAddress | NA | |
column · MacAddress · not-accessible · current A unicast MAC address for which the device has forwarding and/or filtering information. | ||||
| CgDot1qTpFdbPort | 1.3.6.1.4.1.13464.1.2.4.2.1.2.2.1.2 | INTEGER (0..65535) | RO | |
column · INTEGER (0..65535) · read-only · current Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of gDot1qTpFdbAddress has been seen. A value of '0' indicates that the port number has not been learned but that the device does have some forwarding/filtering information about this address (e.g. in the gDot1qStaticUnicastTable). Implementors are encouraged to assign the port value to this object whenever it is learned even for addresses for which the corresponding value of gDot1qTpFdbStatus is not learned(3). | ||||
| CgDot1qTpFdbStatus | 1.3.6.1.4.1.13464.1.2.4.2.1.2.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The status of this entry. The meanings of the values
are:
other(1) - none of the following. This may include
the case where some other MIB object (not the
corresponding instance of gDot1qTpFdbPort, nor an
entry in the gDot1qStaticUnicastTable) is being
used to determine if and how frames addressed to
the value of the corresponding instance of
gDot1qTpFdbAddress are being forwarded.
invalid(2) - this entry is no longer valid (e.g., it
was learned but has since aged out), but has not
yet been flushed from the table.
learned(3) - the value of the corresponding instance
of gDot1qTpFdbPort was learned and is being used.
self(4) - the value of the corresponding instance of
gDot1qTpFdbAddress represents one of the device's
addresses. The corresponding instance of
gDot1qTpFdbPort indicates which of the device's
ports has this address.
mgmt(5) - the value of the corresponding instance of
gDot1qTpFdbAddress is also the value of an
existing instance of gDot1qStaticAddress.
| ||||
| TgDot1qTpGroupTable | 1.3.6.1.4.1.13464.1.2.4.2.1.2.3 | NA | ||
table · not-accessible · current A table containing filtering information for VLANs configured into the bridge by (local or network) management, or learnt dynamically, specifying the set of ports to which frames received on a VLAN for this FDB and containing a specific Group destination address are allowed to be forwarded. | ||||
| RgDot1qTpGroupEntry | 1.3.6.1.4.1.13464.1.2.4.2.1.2.3.1 | NA | ||
row · not-accessible · current Filtering information configured into the bridge by management, or learnt dynamically, specifying the set of ports to which frames received on a VLAN and containing a specific Group destination address, are allowed to be forwarded. The subset of these ports learnt dynamically is also provided. | ||||
| CgDot1qTpGroupAddress | 1.3.6.1.4.1.13464.1.2.4.2.1.2.3.1.1 | MacAddress | NA | |
column · MacAddress · not-accessible · current The destination Group MAC address in a frame to which this entry's filtering information applies. | ||||
| CgDot1qTpGroupEgressPorts | 1.3.6.1.4.1.13464.1.2.4.2.1.2.3.1.2 | PortList | RO | |
column · PortList · read-only · current The complete set of ports, in this VLAN, to which frames destined for this Group MAC address are currently being explicitly forwarded. This does not include ports for which this address is only implicitly forwarded, in the gDot1qForwardAllPorts list. | ||||
| CgDot1qTpGroupLearnt | 1.3.6.1.4.1.13464.1.2.4.2.1.2.3.1.3 | PortList | RO | |
column · PortList · read-only · current The subset of ports in gDot1qTpGroupEgressPorts which were learnt by GMRP or some other dynamic mechanism, in this Filtering database. | ||||
| TgDot1qForwardAllTable | 1.3.6.1.4.1.13464.1.2.4.2.1.2.4 | NA | ||
table · not-accessible · current A table containing forwarding information for each VLAN, specifying the set of ports to which forwarding of all multicasts applies, configured statically by management or dynamically by GMRP. An entry appears in this table for all VLANs that are currently instantiated. | ||||
| RgDot1qForwardAllEntry | 1.3.6.1.4.1.13464.1.2.4.2.1.2.4.1 | NA | ||
row · not-accessible · current Forwarding information for a VLAN, specifying the set of ports to which all multicasts should be forwarded, configured statically by management or dynamically by GMRP.
| ||||
| CgDot1qForwardAllPorts | 1.3.6.1.4.1.13464.1.2.4.2.1.2.4.1.1 | PortList | RO | |
column · PortList · read-only · current The complete set of ports in this VLAN to which all multicast group-addressed frames are to be forwarded. This includes ports for which this need has been determined dynamically by GMRP, or configured statically by management. | ||||
| CgDot1qForwardAllVlanIndex | 1.3.6.1.4.1.13464.1.2.4.2.1.2.4.1.2 | VlanIndex | RO | |
column · VlanIndex · read-only · current DURABLE: { 0:all }
This is here only to allow the VLAN index to be saved along
with the corresponding forward all table entry. | ||||
| CgDot1qForwardAllStaticPorts | 1.3.6.1.4.1.13464.1.2.4.2.1.2.4.1.3 | PortList | RW | |
column · PortList · read-write · current DURABLE: { 0:all }
The set of ports configured by management in this VLAN
to which all multicast group-addressed frames are to be
forwarded. Ports entered in this list will also appear
in the complete set shown by gDot1qForwardAllPorts. This
value will be restored after the device is reset. This
only applies to ports that are members of the VLAN,
defined by gDot1qVlanCurrentEgressPorts. A port may not
be added in this set if it is already a member of the
set of ports in gDot1qForwardAllForbiddenPorts. The
default value is a string of ones of appropriate length,
to indicate standard non-EFS behaviour, i.e. forward
all multicasts to all ports. | ||||
| CgDot1qForwardAllForbiddenPorts | 1.3.6.1.4.1.13464.1.2.4.2.1.2.4.1.4 | PortList | RW | |
column · PortList · read-write · current DURABLE: { 0:all }
The set of ports configured by management in this VLAN
for which the Service Requirement attribute Forward All
Multicast Groups may not be dynamically registered by
GMRP. This value will be restored after the device is
reset. A port may not be added in this set if it is
already a member of the set of ports in
gDot1qForwardAllStaticPorts. The default value is a
string of zeros of appropriate length. | ||||
| TgDot1qForwardUnregisteredTable | 1.3.6.1.4.1.13464.1.2.4.2.1.2.5 | NA | ||
table · not-accessible · current A table containing forwarding information for each VLAN, specifying the set of ports to which forwarding of multicast group-addressed frames for which there is no more specific forwarding information applies. This is configured statically by management and determined dynamically by GMRP. An entry appears in this table for all VLANs that are currently instantiated. | ||||
| RgDot1qForwardUnregisteredEntry | 1.3.6.1.4.1.13464.1.2.4.2.1.2.5.1 | NA | ||
row · not-accessible · current Forwarding information for a VLAN, specifying the set of ports to which all multicasts for which there is no more specific forwarding information shall be forwarded. This is configured statically by management or dynamically by GMRP.
| ||||
| CgDot1qForwardUnregisteredPorts | 1.3.6.1.4.1.13464.1.2.4.2.1.2.5.1.1 | PortList | RO | |
column · PortList · read-only · current The complete set of ports in this VLAN to which multicast group-addressed frames for which there is no more specific forwarding information will be forwarded. This includes ports for which this need has been determined dynamically by GMRP, or configured statically by management. | ||||
| CgDot1qForwardUnregisteredVlanIndex | 1.3.6.1.4.1.13464.1.2.4.2.1.2.5.1.2 | VlanIndex | RO | |
column · VlanIndex · read-only · current DURABLE: { 0:all }
This is here only to allow the VLAN index to be saved along
with the corresponding forward unregistered table entry. | ||||
| CgDot1qForwardUnregisteredStaticPorts | 1.3.6.1.4.1.13464.1.2.4.2.1.2.5.1.3 | PortList | RW | |
column · PortList · read-write · current DURABLE: { 0:all }
The set of ports configured by management, in this
VLAN, to which multicast group-addressed frames for
which there is no more specific forwarding information
are to be forwarded. Ports entered in this list will
also appear in the complete set shown by
gDot1qForwardUnregisteredPorts. This value will be
restored after the device is reset. A port may not be
added in this set if it is already a member of the set
of ports in gDot1qForwardUnregisteredForbiddenPorts. The
default value is a string of zeros of appropriate
length, although this has no effect with the default
value of gDot1qForwardAllStaticPorts. | ||||
| CgDot1qForwardUnregisteredForbiddenPorts | 1.3.6.1.4.1.13464.1.2.4.2.1.2.5.1.4 | PortList | RW | |
column · PortList · read-write · current DURABLE: { 0:all }
The set of ports configured by management in this VLAN
for which the Service Requirement attribute Forward
Unregistered Multicast Groups may not be dynamically
registered by GMRP. This value will be restored after
the device is reset. A port may not be added in this
set if it is already a member of the set of ports in
gDot1qForwardUnregisteredStaticPorts. The default value
is a string of zeros of appropriate length. | ||||
| NgDot1qStatic | 1.3.6.1.4.1.13464.1.2.4.2.1.3 | |||
| TgDot1qStaticUnicastTable | 1.3.6.1.4.1.13464.1.2.4.2.1.3.1 | NA | ||
table · not-accessible · current A table containing filtering information for Unicast MAC addresses for each Filtering Database, configured into the device by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific unicast destination addresses are allowed to be forwarded. A value of zero in this table as the port number from which frames with a specific destination address are received, is used to specify all ports for which there is no specific entry in this table for that particular destination address. Entries are valid for unicast addresses only. | ||||
| RgDot1qStaticUnicastEntry | 1.3.6.1.4.1.13464.1.2.4.2.1.3.1.1 | NA | ||
row · not-accessible · current Filtering information configured into the device by (local or network) management specifying the set of ports to which frames received from a specific port and containing a specific unicast destination address are allowed to be forwarded. | ||||
| CgDot1qStaticUnicastAddress | 1.3.6.1.4.1.13464.1.2.4.2.1.3.1.1.1 | MacAddress | NA | |
column · MacAddress · not-accessible · current The destination MAC address in a frame to which this entry's filtering information applies. This object must take the value of a unicast address. | ||||
| CgDot1qStaticUnicastReceivePort | 1.3.6.1.4.1.13464.1.2.4.2.1.3.1.1.2 | INTEGER (0..65535) | NA | |
column · INTEGER (0..65535) · not-accessible · current Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the device for which there is no other applicable entry. | ||||
| CgDot1qStaticUnicastAllowedToGoTo | 1.3.6.1.4.1.13464.1.2.4.2.1.3.1.1.3 | PortList | RW | |
column · PortList · read-write · current The set of ports for which a frame with a specific unicast address will be flooded in the event that it has not been learned. It also specifies the set of ports a specific unicast address may be dynamically learnt on. The gDot1qTpFdbTable will have an equivalent entry with a gDot1qTpFdbPort value of '0' until this address has been learnt, when it will be updated with the port the address has been seen on. This only applies to ports that are members of the VLAN, defined by gDot1qVlanCurrentEgressPorts. The default value of this object is a string of ones of appropriate length. | ||||
| CgDot1qStaticUnicastStatus | 1.3.6.1.4.1.13464.1.2.4.2.1.3.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the status of this entry.
other(1) - this entry is currently in use but
the conditions under which it will remain
so differ from the following values.
invalid(2) - writing this value to the object
removes the corresponding entry.
permanent(3) - this entry is currently in use
and will remain so after the next reset of
the bridge.
deleteOnReset(4) - this entry is currently in
use and will remain so until the next
reset of the bridge.
deleteOnTimeout(5) - this entry is currently in
use and will remain so until it is aged out.
| ||||
| TgDot1qStaticMulticastTable | 1.3.6.1.4.1.13464.1.2.4.2.1.3.2 | NA | ||
table · not-accessible · current A table containing filtering information for Multicast and Broadcast MAC addresses for each VLAN, configured into the device by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific Multicast and Broadcast destination addresses are allowed to be forwarded. A value of zero in this table as the port number from which frames with a specific destination address are received, is used to specify all ports for which there is no specific entry in this table for that particular destination address. Entries are valid for Multicast and Broadcast addresses only. | ||||
| RgDot1qStaticMulticastEntry | 1.3.6.1.4.1.13464.1.2.4.2.1.3.2.1 | NA | ||
row · not-accessible · current Filtering information configured into the device by (local or network) management specifying the set of ports to which frames received from this specific port for this VLAN and containing this Multicast or Broadcast destination address are allowed to be forwarded. | ||||
| CgDot1qStaticMulticastVlanIndex | 1.3.6.1.4.1.13464.1.2.4.2.1.3.2.1.1 | VlanIndex | RO | |
column · VlanIndex · read-only · current DURABLE: { 0:all }
This is here to allow the VLAN Index to be saved along with
the corresponding multicast table entry. | ||||
| CgDot1qStaticMulticastAddress | 1.3.6.1.4.1.13464.1.2.4.2.1.3.2.1.2 | MacAddress | RO | |
column · MacAddress · read-only · current DURABLE: { 0:all}
The destination MAC address in a frame to which this
entry's filtering information applies. This object must
take the value of a Multicast or Broadcast address. | ||||
| CgDot1qStaticMulticastReceivePort | 1.3.6.1.4.1.13464.1.2.4.2.1.3.2.1.3 | INTEGER (0..65535) | RO | |
column · INTEGER (0..65535) · read-only · current DURABLE: { 0:all }
Either the value '0', or the port number of the port
from which a frame must be received in order for this
entry's filtering information to apply. A value of zero
indicates that this entry applies on all ports of the
device for which there is no other applicable entry. | ||||
| CgDot1qStaticMulticastStaticEgressPorts | 1.3.6.1.4.1.13464.1.2.4.2.1.3.2.1.4 | PortList | RW | |
column · PortList · read-write · current DURABLE: { 0:all }
The set of ports to which frames received from a
specific port and destined for a specific Multicast or
Broadcast MAC address must be forwarded, regardless of
any dynamic information e.g. from GMRP. A port may not
be added in this set if it is already a member of the
set of ports in gDot1qStaticMulticastForbiddenEgressPorts.
The default value of this object is a string of ones of
appropriate length. | ||||
| CgDot1qStaticMulticastForbiddenEgressPorts | 1.3.6.1.4.1.13464.1.2.4.2.1.3.2.1.5 | PortList | RW | |
column · PortList · read-write · current DURABLE: { 0:all }
The set of ports to which frames received from a
specific port and destined for a specific Multicast or
Broadcast MAC address must not be forwarded, regardless
of any dynamic information e.g. from GMRP. A port may
not be added in this set if it is already a member of the
set of ports in gDot1qStaticMulticastStaticEgressPorts.
The default value of this object is a string of zeros of
appropriate length. | ||||
| CgDot1qStaticMulticastStatus | 1.3.6.1.4.1.13464.1.2.4.2.1.3.2.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current DURABLE: { 0:all }
This object indicates the status of this entry.
other(1) - this entry is currently in use but
the conditions under which it will remain
so differ from the following values.
invalid(2) - writing this value to the object
removes the corresponding entry.
permanent(3) - this entry is currently in use
and will remain so after the next reset of
the bridge.
deleteOnReset(4) - this entry is currently in
use and will remain so until the next
reset of the bridge.
deleteOnTimeout(5) - this entry is currently in
use and will remain so until it is aged out.
| ||||
| CgDot1qGmrpLearningPermit | 1.3.6.1.4.1.13464.1.2.4.2.1.3.2.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to add a mcast to garp so that other devices can learn it.
| ||||
| NgDot1qVlan | 1.3.6.1.4.1.13464.1.2.4.2.1.4 | |||
| SgDot1qVlanNumDeletes | 1.3.6.1.4.1.13464.1.2.4.2.1.4.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of times a VLAN entry has been deleted from the gDot1qVlanCurrentTable (for any reason). If an entry is deleted, then inserted, and then deleted, this counter will be incremented by 2. | ||||
| TgDot1qVlanCurrentTable | 1.3.6.1.4.1.13464.1.2.4.2.1.4.2 | NA | ||
table · not-accessible · current A table containing current configuration information for each VLAN currently configured into the device by (local or network) management, or dynamically created as a result of GVRP requests received. | ||||
| RgDot1qVlanCurrentEntry | 1.3.6.1.4.1.13464.1.2.4.2.1.4.2.1 | NA | ||
row · not-accessible · current Information for a VLAN configured into the device by (local or network) management, or dynamically created as a result of GVRP requests received. | ||||
| CgDot1qVlanTimeMark | 1.3.6.1.4.1.13464.1.2.4.2.1.4.2.1.1 | TimeFilter | NA | |
column · TimeFilter · not-accessible · current A TimeFilter for this entry. See the TimeFilter textual convention to see how this works. | ||||
| CgDot1qVlanIndex | 1.3.6.1.4.1.13464.1.2.4.2.1.4.2.1.2 | VlanIndex | NA | |
column · VlanIndex · not-accessible · current The VLAN-ID or other identifier refering to this VLAN. | ||||
| CgDot1qVlanFdbId | 1.3.6.1.4.1.13464.1.2.4.2.1.4.2.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The Filtering Database used by this VLAN. This is one of the gDot1qFdbId values in the gDot1qFdbTable. This value is allocated automatically by the device whenever the VLAN is created: either dynamically by GVRP, or by management, in gDot1qVlanStaticTable. Allocation of this value follows the learning constraints defined for this VLAN in gDot1qLearningConstraintsTable. | ||||
| CgDot1qVlanCurrentEgressPorts | 1.3.6.1.4.1.13464.1.2.4.2.1.4.2.1.4 | PortList | RO | |
column · PortList · read-only · current The set of ports which are transmitting traffic for this VLAN as either tagged or untagged frames. | ||||
| CgDot1qVlanCurrentUntaggedPorts | 1.3.6.1.4.1.13464.1.2.4.2.1.4.2.1.5 | PortList | RO | |
column · PortList · read-only · current The set of ports which are transmitting traffic for this VLAN as untagged frames. | ||||
| CgDot1qVlanStatus | 1.3.6.1.4.1.13464.1.2.4.2.1.4.2.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the status of this entry.
other(1) - this entry is currently in use but the
conditions under which it will remain so differ
from the following values.
permanent(2) - this entry, corresponding to an entry
in gDot1qVlanStaticTable, is currently in use and
will remain so after the next reset of the
device. The port lists for this entry include
ports from the equivalent gDot1qVlanStaticTable
entry and ports learnt dynamically.
dynamicGvrp(3) - this entry is currently in use
and will remain so until removed by GVRP. There
is no static entry for this VLAN and it will be
removed when the last port leaves the VLAN.
| ||||
| CgDot1qVlanCreationTime | 1.3.6.1.4.1.13464.1.2.4.2.1.4.2.1.7 | TimeTicks | RO | |
column · TimeTicks · read-only · current The value of sysUpTime when this VLAN was created. | ||||
| TgDot1qVlanStaticTable | 1.3.6.1.4.1.13464.1.2.4.2.1.4.3 | NA | ||
table · not-accessible · current A table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and will be restored after the device is reset. | ||||
| RgDot1qVlanStaticEntry | 1.3.6.1.4.1.13464.1.2.4.2.1.4.3.1 | NA | ||
row · not-accessible · current Static information for a VLAN configured into the device by (local or network) management.
| ||||
| CgDot1qVlanStaticName | 1.3.6.1.4.1.13464.1.2.4.2.1.4.3.1.1 | DisplayString (SIZE (0..32)) | RC | |
column · DisplayString (SIZE (0..32)) · read-create · current DURABLE: { 'Default' }
An administratively assigned string, which may be used
to identify the VLAN. | ||||
| CgDot1qVlanStaticEgressPorts | 1.3.6.1.4.1.13464.1.2.4.2.1.4.3.1.2 | PortList | RC | |
column · PortList · read-create · current DURABLE: { 0:all }
The set of ports which are permanently assigned to the
egress list for this VLAN by management. Changes to a
bit in this object affect the per-port per-VLAN
Registrar control for Registration Fixed for the
relevant GVRP state machine on each port. A port may
not be added in this set if it is already a member of
the set of ports in gDot1qVlanForbiddenEgressPorts. The
default value of this object is a string of zeros of
appropriate length, indicating not fixed. | ||||
| CgDot1qVlanForbiddenEgressPorts | 1.3.6.1.4.1.13464.1.2.4.2.1.4.3.1.3 | PortList | RC | |
column · PortList · read-create · current DURABLE: { 0:all }
The set of ports which are prohibited by management
from being included in the egress list for this VLAN.
Changes to this object that cause a port to be included
or excluded affect the per-port per-VLAN Registrar
control for Registration Forbidden for the relevant GVRP
state machine on each port. A port may not be added in
this set if it is already a member of the set of ports
in gDot1qVlanStaticEgressPorts. The default value of
this object is a string of zeros of appropriate length,
excluding all ports from the forbidden set. | ||||
| CgDot1qVlanStaticUntaggedPorts | 1.3.6.1.4.1.13464.1.2.4.2.1.4.3.1.4 | PortList | RC | |
column · PortList · read-create · current DURABLE: { 0:all }
The set of ports which should transmit egress packets
for this VLAN as untagged. The default value of this
object for the default VLAN (gDot1qVlanIndex = 1) is a string
of appropriate length including all ports. There is no
specified default for other VLANs. If a device agent cannot
support the set of ports being set then it will reject the
set operation with an error. An example might be if a
manager attempts to set more than one VLAN to be untagged
on egress where the device does not support this IEEE 802.1Q
option. | ||||
| CgDot1qVlanStaticRowStatus | 1.3.6.1.4.1.13464.1.2.4.2.1.4.3.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the status of this entry. | ||||
| CgDot1qGvrpLearningPermit | 1.3.6.1.4.1.13464.1.2.4.2.1.4.3.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to add a vlan to garp so that other devices can learn it.
| ||||
| CgDot1qVlanSpanningTreeGroup | 1.3.6.1.4.1.13464.1.2.4.2.1.4.3.1.7 | INTEGER (0..15) | RW | |
column · INTEGER (0..15) · read-write · current This object is used to Get/Set current vlan's spanning-tree group num | ||||
| SgDot1qNextFreeLocalVlanIndex | 1.3.6.1.4.1.13464.1.2.4.2.1.4.4 | INTEGER (0 | 4096..2147483647) | RO | |
scalar · INTEGER (0 | 4096..2147483647) · read-only · current The next available value for gDot1qVlanIndex of a local VLAN entry in gDot1qVlanStaticTable. This will report values >=4096 if a new Local VLAN may be created or else the value 0 if this is not possible. A row creation operation in this table for an entry with a local VlanIndex value may fail if the current value of this object is not used as the index. Even if the value read is used, there is no guarantee that it will still be the valid index when the create operation is attempted - another manager may have already got in during the intervening time interval. In this case, gDot1qNextFreeLocalVlanIndex should be re-read and the creation re-tried with the new value. This value will automatically change when the current value is used to create a new row. | ||||
| TgDot1qPortVlanTable | 1.3.6.1.4.1.13464.1.2.4.2.1.4.5 | NA | ||
table · not-accessible · current A table containing per port control and status information for VLAN configuration in the device. | ||||
| RgDot1qPortVlanEntry | 1.3.6.1.4.1.13464.1.2.4.2.1.4.5.1 | NA | ||
row · not-accessible · current Information controlling VLAN configuration for a port on the device. This is indexed by dot1dBasePort.
| ||||
| CgDot1qPvid | 1.3.6.1.4.1.13464.1.2.4.2.1.4.5.1.1 | VlanIndex | RW | |
column · VlanIndex · read-write · current DURABLE: { 1:all }
The PVID, the VLAN ID assigned to untagged frames or
Prority-Tagged frames received on this port. | ||||
| CgDot1qPortAcceptableFrameTypes | 1.3.6.1.4.1.13464.1.2.4.2.1.4.5.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current DURABLE: { 1:all }
When this is admitOnlyVlanTagged(2) the device will
discard untagged frames or Prority-Tagged frames
received on this port. When admitAll(1), untagged
frames or Prority-Tagged frames received on this port
will be accepted and assigned to the PVID for this port.
This control does not affect VLAN independent BPDU
frames, such as GVRP and STP. It does affect VLAN
dependent BPDU frames, such as GMRP.
| ||||
| CgDot1qPortIngressFiltering | 1.3.6.1.4.1.13464.1.2.4.2.1.4.5.1.3 | TruthValue | RW | |
column · TruthValue · read-write · current DURABLE: {1:all}
When this is true(1) the device will discard incoming
frames for VLANs which do not include this Port in its
Member set. When false(2), the port will accept all
incoming frames.
This control does not affect VLAN independent BPDU
frames, such as GVRP and STP. It does affect VLAN
dependent BPDU frames, such as GMRP. | ||||
| CgDot1qPortGvrpStatus | 1.3.6.1.4.1.13464.1.2.4.2.1.4.5.1.4 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current DURABLE: {enabled:all}
The state of GVRP operation on this port. The value
enabled(1) indicates that GVRP is enabled on this port,
as long as gDot1qGvrpStatus is also enabled for this
device. When disabled(2) but gDot1qGvrpStatus is still
enabled for the device, GVRP is disabled on this port:
any GVRP packets received will be silently discarded and
no GVRP registrations will be propagated from other
ports. This object affects all GVRP Applicant and
Registrar state machines on this port. A transition
from disabled(2) to enabled(1) will cause a reset of all
GVRP state machines on this port.
| ||||
| CgDot1qPortGvrpFailedRegistrations | 1.3.6.1.4.1.13464.1.2.4.2.1.4.5.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of failed GVRP registrations, for any reason, on this port. | ||||
| CgDot1qPortGvrpLastPduOrigin | 1.3.6.1.4.1.13464.1.2.4.2.1.4.5.1.6 | MacAddress | RO | |
column · MacAddress · read-only · current The Source MAC Address of the last GVRP message received on this port. | ||||
| TgDot1qLearningConstraintsTable | 1.3.6.1.4.1.13464.1.2.4.2.1.4.6 | NA | ||
table · not-accessible · current A table containing learning constraints for sets of Shared and Independendent VLANs. | ||||
| RgDot1qLearningConstraintsEntry | 1.3.6.1.4.1.13464.1.2.4.2.1.4.6.1 | NA | ||
row · not-accessible · current A learning constraint defined for a VLAN. | ||||
| CgDot1qConstraintVlan | 1.3.6.1.4.1.13464.1.2.4.2.1.4.6.1.1 | VlanIndex | NA | |
column · VlanIndex · not-accessible · current The index of the row in gDot1qVlanCurrentTable for the VLAN constrained by this entry. | ||||
| CgDot1qConstraintSet | 1.3.6.1.4.1.13464.1.2.4.2.1.4.6.1.2 | INTEGER (0..65535) | NA | |
column · INTEGER (0..65535) · not-accessible · current The identity of the constraint set to which gDot1qConstraintVlan belongs. These values may be chosen by the management station. | ||||
| CgDot1qConstraintType | 1.3.6.1.4.1.13464.1.2.4.2.1.4.6.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current The type of constraint this entry defines.
independent(1) - the VLAN, gDot1qConstraintVlan,
uses an independent filtering database from all
other VLANs in the same set, defined by
gDot1qConstraintSet.
shared(2) - the VLAN, gDot1qConstraintVlan, shares
the same filtering database as all other VLANs
in the same set, defined by gDot1qConstraintSet.
| ||||
| CgDot1qConstraintStatus | 1.3.6.1.4.1.13464.1.2.4.2.1.4.6.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this entry. | ||||
| SgDot1qConstraintSetDefault | 1.3.6.1.4.1.13464.1.2.4.2.1.4.7 | INTEGER (0..65535) | RW | |
scalar · INTEGER (0..65535) · read-write · current The identity of the constraint set to which a VLAN belongs, if there is not an explicit entry for that VLAN in gDot1qLearningConstraintsTable. | ||||
| SgDot1qConstraintTypeDefault | 1.3.6.1.4.1.13464.1.2.4.2.1.4.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current The type of constraint set to which a VLAN belongs, if there is not an explicit entry for that VLAN in gDot1qLearningConstraintsTable. The types are as defined for gDot1qConstraintType.
| ||||
| NgDot1dGarp | 1.3.6.1.4.1.13464.1.2.4.2.1.5 | |||
| TgDot1dPortGarpTable | 1.3.6.1.4.1.13464.1.2.4.2.1.5.1 | NA | ||
table · not-accessible · current A table of GARP control information about every bridge port. This is indexed by gDot1qBasePort. | ||||
| RgDot1dPortGarpEntry | 1.3.6.1.4.1.13464.1.2.4.2.1.5.1.1 | NA | ||
| CgDot1dPortEnable | 1.3.6.1.4.1.13464.1.2.4.2.1.5.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The enabled/disabled status of the port for all GARP protocol instances. This should be set according to the current link state of the port
| ||||
| CgDot1dPortGarpJoinTime | 1.3.6.1.4.1.13464.1.2.4.2.1.5.1.1.2 | TimeInterval | RW | |
column · TimeInterval · read-write · current DURABLE: { 20:all }
The GARP Join time, in centiseconds. | ||||
| CgDot1dPortGarpLeaveTime | 1.3.6.1.4.1.13464.1.2.4.2.1.5.1.1.3 | TimeInterval | RW | |
column · TimeInterval · read-write · current DURABLE: { 60:all }
The GARP Leave time, in centiseconds. | ||||
| CgDot1dPortGarpLeaveAllTime | 1.3.6.1.4.1.13464.1.2.4.2.1.5.1.1.4 | TimeInterval | RW | |
column · TimeInterval · read-write · current DURABLE: { 1000:all }
The GARP LeaveAll time, in centiseconds. | ||||
| NgDot1dGmrp | 1.3.6.1.4.1.13464.1.2.4.2.1.6 | |||
| TgDot1dPortGmrpTable | 1.3.6.1.4.1.13464.1.2.4.2.1.6.1 | NA | ||
table · not-accessible · current A table of GMRP control and status information about every bridge port. Augments the gDot1qBasePortTable. | ||||
| RgDot1dPortGmrpEntry | 1.3.6.1.4.1.13464.1.2.4.2.1.6.1.1 | NA | ||
row · not-accessible · current GMRP control and status information for a bridge port.
| ||||
| CgDot1dPortGmrp | 1.3.6.1.4.1.13464.1.2.4.2.1.6.1.1.1 | INTEGER (1..128) | RO | |
column · INTEGER (1..128) · read-only · current The port number of the port for which this entry contains GMRP management information. | ||||
| CgDot1dPortGmrpStatus | 1.3.6.1.4.1.13464.1.2.4.2.1.6.1.1.2 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current DURABLE: { enabled:all }
The administrative state of GMRP operation on this port. The
value enabled(1) indicates that GMRP is enabled on this port
in all VLANs as long as garpGmrpStatus is also enabled(1).
A value of disabled(2) indicates that GMRP is disabled on this
port in all VLANs: any GMRP packets received will
be silently discarded and no GMRP registrations will be
propagated from other ports. Setting this to a value of
enabled(1) will be stored by the agent but will only take effect
on the GMRP protocol operation if garpGmrpStatus also
indicates the value enabled(1). This object affects all
GMRP Applicant and Registrar state machines on this
port. A transition from disabled(2) to enabled(1) will
cause a reset of all GMRP state machines on this port.
| ||||
| CgDot1dPortGmrpFailedRegistrations | 1.3.6.1.4.1.13464.1.2.4.2.1.6.1.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of failed GMRP registrations, for any reason, in all VLANs, on this port. | ||||
| CgDot1dPortGmrpLastPduOrigin | 1.3.6.1.4.1.13464.1.2.4.2.1.6.1.1.4 | MacAddress | RO | |
column · MacAddress · read-only · current The Source MAC Address of the last GMRP message received on this port. | ||||
| NgDot1dExtBase | 1.3.6.1.4.1.13464.1.2.4.2.1.7 | |||
| SgDot1dGmrpStatus | 1.3.6.1.4.1.13464.1.2.4.2.1.7.1 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current DURABLE: { enabled }
The administrative status requested by management for
GMRP. The value enabled(1) indicates that GMRP should
be enabled on this device, in all VLANs, on all ports
for which it has not been specifically disabled. When
disabled(2), GMRP is disabled, in all VLANs, on all
ports and all GMRP packets will be forwarded
transparently. This object affects both Applicant and
Registrar state machines. A transition from disabled(2)
to enabled(1) will cause a reset of all GMRP state
machines on all ports.
| ||||
| NgDot1qExtend | 1.3.6.1.4.1.13464.1.2.4.2.1.8 | |||
| SgDot1qDoubleTagging | 1.3.6.1.4.1.13464.1.2.4.2.1.8.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The global QinQ status
| ||||
| SgDot1qTpid | 1.3.6.1.4.1.13464.1.2.4.2.1.8.2 | INTEGER (1..65535) | RW | |
scalar · INTEGER (1..65535) · read-write · current The tag protocol id of service provider, this value is used to determine if a incoming packets is tagged and used when insert a new tag | ||||
| TgDot1qDoubleTaggingTable | 1.3.6.1.4.1.13464.1.2.4.2.1.8.3 | NA | ||
table · not-accessible · current This table is used to config the double tagging function. | ||||
| RgDot1qDoubleTaggingEntry | 1.3.6.1.4.1.13464.1.2.4.2.1.8.3.1 | NA | ||
row · not-accessible · current Information about double tagging table entry. | ||||
| CgDot1qDoubleTaggingPort | 1.3.6.1.4.1.13464.1.2.4.2.1.8.3.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The index of double tagging entry. | ||||
| CgDot1qDoubleTaggingMode | 1.3.6.1.4.1.13464.1.2.4.2.1.8.3.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Port's 8021q-in-8021q mode: dtagModeNone means QinQ is disabled; dtagModeInternal means incoming pkt's will be inserted a tag if it has no tag or its' tag-id doesn't match that of the port. dtagModeExternal means incoming pkt's tag is always be ignored and a new tag is inserted.
| ||||
| CgDot1qPortInnerTpid | 1.3.6.1.4.1.13464.1.2.4.2.1.8.3.1.3 | INTEGER (1..65535) | RW | |
column · INTEGER (1..65535) · read-write · current Used to change the original tag's(i.e.customer tag) tpid of packet when dtag enabled. | ||||
| CgDot1qPortOuterTpid | 1.3.6.1.4.1.13464.1.2.4.2.1.8.3.1.4 | INTEGER (1..65535) | RW | |
column · INTEGER (1..65535) · read-write · current Used to change the new tag's(i.e.service-provider tag) tpid of packet when dtag enabled. | ||||
| SgDot1qInnerTpid | 1.3.6.1.4.1.13464.1.2.4.2.1.8.4 | INTEGER (1..65535) | RW | |
scalar · INTEGER (1..65535) · read-write · current Used to change the original tag's(i.e.customer tag) tpid of packet when dtag enabled. | ||||
| TgDot1qVlanMacTable | 1.3.6.1.4.1.13464.1.2.4.2.1.8.5 | NA | ||
table · not-accessible · current This table is used to assign a VLAN ID for a packet based on the source MAC Address. If an entry is found, then the VLAN ID, PRIORITY of vlan mac table will be used for the packet. | ||||
| RgDot1qVlanMacEntry | 1.3.6.1.4.1.13464.1.2.4.2.1.8.5.1 | NA | ||
| CgDot1qVlanMacAddress | 1.3.6.1.4.1.13464.1.2.4.2.1.8.5.1.1 | MacAddress | RO | |
column · MacAddress · read-only · current The index of vlan mac table entry. | ||||
| CgDot1qVlanMacNewVlanId | 1.3.6.1.4.1.13464.1.2.4.2.1.8.5.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Vlan id to be assigned to the packet. | ||||
| CgDot1qVlanMacNewPriority | 1.3.6.1.4.1.13464.1.2.4.2.1.8.5.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Priority to be assigned to the packet. | ||||
| CgDot1qVlanMacStatus | 1.3.6.1.4.1.13464.1.2.4.2.1.8.5.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current table entry status.
| ||||
| TgDot1qVlanSubnetTable | 1.3.6.1.4.1.13464.1.2.4.2.1.8.6 | NA | ||
table · not-accessible · current This table is used to assign a VLAN ID for a packet based on the source IP Address. | ||||
| RgDot1qVlanSubnetEntry | 1.3.6.1.4.1.13464.1.2.4.2.1.8.6.1 | NA | ||
row · not-accessible · current Information about a vlan subnet table entry. | ||||
| CgDot1qVlanSubnetIpAddress | 1.3.6.1.4.1.13464.1.2.4.2.1.8.6.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The first index of vlan subnet table entry. | ||||
| CgDot1qVlanSubnetIpMask | 1.3.6.1.4.1.13464.1.2.4.2.1.8.6.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The second index of vlan subnet table entry. | ||||
| CgDot1qVlanSubnetNewVlanId | 1.3.6.1.4.1.13464.1.2.4.2.1.8.6.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Vlan id to be assigned to the packet. | ||||
| CgDot1qVlanSubnetNewPriority | 1.3.6.1.4.1.13464.1.2.4.2.1.8.6.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Priority to be assigned to the packet. | ||||
| CgDot1qVlanSubnetStatus | 1.3.6.1.4.1.13464.1.2.4.2.1.8.6.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current table entry status.
| ||||
| TgDot1qVlanProtoTable | 1.3.6.1.4.1.13464.1.2.4.2.1.8.7 | NA | ||
table · not-accessible · current This table is used to assign a VLAN for a packet based on the protocol(FrameType,EtherType)and the ingress port. | ||||
| RgDot1qVlanProtoEntry | 1.3.6.1.4.1.13464.1.2.4.2.1.8.7.1 | NA | ||
row · not-accessible · current Information about a vlan protocol table entry. | ||||
| CgDot1qVlanProtoFrameType | 1.3.6.1.4.1.13464.1.2.4.2.1.8.7.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current Frame type£ºthe first index of vlan protocol entry. | ||||
| CgDot1qVlanProtoEthertype | 1.3.6.1.4.1.13464.1.2.4.2.1.8.7.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Ether type£ºthe second index of vlan protocol entry. | ||||
| CgDot1qVlanProtoPortId | 1.3.6.1.4.1.13464.1.2.4.2.1.8.7.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Ingress, wthe third index of vlan protocol entry. | ||||
| CgDot1qVlanProtoNewVlanId | 1.3.6.1.4.1.13464.1.2.4.2.1.8.7.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Vlan id to be assigned to packet. | ||||
| CgDot1qVlanProtoStatus | 1.3.6.1.4.1.13464.1.2.4.2.1.8.7.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current table entry status.
| ||||
| TgDot1qVlanTranslationTable | 1.3.6.1.4.1.13464.1.2.4.2.1.8.8 | NA | ||
table · not-accessible · current This table is used to to translate the VLAN ID of an incoming tagged packet to another VLAN ID based on the ingress port and incoming packet VLAN ID. | ||||
| RgDot1qVlanTransEntry | 1.3.6.1.4.1.13464.1.2.4.2.1.8.8.1 | NA | ||
row · not-accessible · current Information about a vlan translation table entry. | ||||
| CgDot1qVlanTransVlanId | 1.3.6.1.4.1.13464.1.2.4.2.1.8.8.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The first index of vlan translation table entry. | ||||
| CgDot1qVlanTransPortId | 1.3.6.1.4.1.13464.1.2.4.2.1.8.8.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The second index of vlan translation table entry. | ||||
| CgDot1qVlanTransNewVlanId | 1.3.6.1.4.1.13464.1.2.4.2.1.8.8.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The new vlan id to be assigned to the packet who match a vlan translation table entry. | ||||
| CgDot1qVlanTransNewPriority | 1.3.6.1.4.1.13464.1.2.4.2.1.8.8.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The priority field of vlan translation table. | ||||
| CgDot1qVlanTransStatus | 1.3.6.1.4.1.13464.1.2.4.2.1.8.8.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current table entry status.
| ||||
| SgDot1qVlanSubnetPrecede | 1.3.6.1.4.1.13464.1.2.4.2.1.8.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current Used to config whether the IP-Subnet Based VLAN has a higher precedence than the MAC Based VLAN.
| ||||
| SgDot1qVlanTransEnable | 1.3.6.1.4.1.13464.1.2.4.2.1.8.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current Used to config current vlan-translation's status.
| ||||
| TgDot1qStackVlanTable | 1.3.6.1.4.1.13464.1.2.4.2.1.8.11 | NA | ||
table · not-accessible · current A table containing stack vlan configuration information for each stack vlan configured into the device by management. | ||||
| RgDot1qStackVlanEntry | 1.3.6.1.4.1.13464.1.2.4.2.1.8.11.1 | NA | ||
row · not-accessible · current Information controlling stack VLAN configuration for a port on the device. This is indexed by port and end vlan id. | ||||
| CgDot1qStackVlanPort | 1.3.6.1.4.1.13464.1.2.4.2.1.8.11.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The index of stack vlan. | ||||
| CgDot1qStartStackVlan | 1.3.6.1.4.1.13464.1.2.4.2.1.8.11.1.2 | INTEGER (1..4095) | RW | |
column · INTEGER (1..4095) · read-write · current The start vlan of the serial vlans we want to insert a new vlan tag. | ||||
| CgDot1qEndStackVlan | 1.3.6.1.4.1.13464.1.2.4.2.1.8.11.1.3 | INTEGER (1..4095) | RW | |
column · INTEGER (1..4095) · read-write · current The end vlan of the serial vlans we want to insert a new vlan tag. | ||||
| CgDot1qTargetStackVlan | 1.3.6.1.4.1.13464.1.2.4.2.1.8.11.1.4 | INTEGER (1..4095) | RW | |
column · INTEGER (1..4095) · read-write · current The target vlan of the serial vlans we want to insert. | ||||
| CgDot1qStackVlanRowStatus | 1.3.6.1.4.1.13464.1.2.4.2.1.8.11.1.5 | RowStatus | RW | |
column · RowStatus · read-write · current Describe the oprations for the entry:4-create 6-delete | ||||
| TgDot1qVlanPassthroughTable | 1.3.6.1.4.1.13464.1.2.4.2.1.8.12 | NA | ||
table · not-accessible · current A table containing vlan passthrough configuration information for each vlan passthrough configured into the device by management. | ||||
| RgDot1qVlanPassthroughEntry | 1.3.6.1.4.1.13464.1.2.4.2.1.8.12.1 | NA | ||
row · not-accessible · current Information controlling VLAN passthrough configuration for a port on the device. This is indexed by port and end vlan id. | ||||
| CgDot1qPassthroughPort | 1.3.6.1.4.1.13464.1.2.4.2.1.8.12.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The index of passthrough entry. | ||||
| CgDot1qStartPassthroughVlan | 1.3.6.1.4.1.13464.1.2.4.2.1.8.12.1.2 | INTEGER (1..4095) | RW | |
column · INTEGER (1..4095) · read-write · current The start vlan of the serial vlans we want to passthrough. | ||||
| CgDot1qEndPassthroughVlan | 1.3.6.1.4.1.13464.1.2.4.2.1.8.12.1.3 | INTEGER (1..4095) | RW | |
column · INTEGER (1..4095) · read-write · current The end vlan of the serial vlans we want to passthrough. | ||||
| CgDot1qPassthroughRowStatus | 1.3.6.1.4.1.13464.1.2.4.2.1.8.12.1.4 | RowStatus | RW | |
column · RowStatus · read-write · current Describe the oprations for the entry:4-create 6-delete. | ||||
| TgDot1qVlanSwapTable | 1.3.6.1.4.1.13464.1.2.4.2.1.8.13 | NA | ||
table · not-accessible · current A table containing vlan swap configuration information for each vlan swap configured into the device by management. | ||||
| RgDot1qVlanSwapEntry | 1.3.6.1.4.1.13464.1.2.4.2.1.8.13.1 | NA | ||
row · not-accessible · current Information controlling VLAN swap configuration for a port on the device. This is indexed by port and end vlan id. | ||||
| CgDot1qVlanSwapPort | 1.3.6.1.4.1.13464.1.2.4.2.1.8.13.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The index of vlan swap entry. | ||||
| CgDot1qStartSwapVlan | 1.3.6.1.4.1.13464.1.2.4.2.1.8.13.1.2 | INTEGER (1..4094) | RW | |
column · INTEGER (1..4094) · read-write · current The start vlan of the serial vlans we want to swap. | ||||
| CgDot1qEndSwapVlan | 1.3.6.1.4.1.13464.1.2.4.2.1.8.13.1.3 | INTEGER (1..4094) | RW | |
column · INTEGER (1..4094) · read-write · current The end vlan of the serial vlans we want to swap. | ||||
| CgDot1qTargetSwapVlan | 1.3.6.1.4.1.13464.1.2.4.2.1.8.13.1.4 | INTEGER (1..4094) | RW | |
column · INTEGER (1..4094) · read-write · current The target vlan of the serial vlans we want to swap. | ||||
| CgDot1qVlanSwapRowStatus | 1.3.6.1.4.1.13464.1.2.4.2.1.8.13.1.5 | RowStatus | RW | |
column · RowStatus · read-write · current Describe the oprations for the entry:4-create 6-delete. | ||||
| NgDot1qProtocolVlan | 1.3.6.1.4.1.13464.1.2.4.2.1.8.14 | |||
| TgDot1qProtocolVlanTable | 1.3.6.1.4.1.13464.1.2.4.2.1.8.14.1 | NA | ||
table · not-accessible · current This table is used to classify a packet based on the protocol(FrameType,EtherType).only for marvell chip | ||||
| RgDot1qProtocolVlanEntry | 1.3.6.1.4.1.13464.1.2.4.2.1.8.14.1.1 | NA | ||
row · not-accessible · current Information about a vlan protocol table entry. | ||||
| CprotocolVlanTableIndex | 1.3.6.1.4.1.13464.1.2.4.2.1.8.14.1.1.1 | INTEGER (0..11) | RO | |
column · INTEGER (0..11) · read-only · current index of vlan protocol entry. | ||||
| CprotocolVlanTableEthertype | 1.3.6.1.4.1.13464.1.2.4.2.1.8.14.1.1.2 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current ether type of packet. | ||||
| CprotocolVlanTableProtocol | 1.3.6.1.4.1.13464.1.2.4.2.1.8.14.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current protocol of packet.bit 0 is ethernetv2, bit 1 is non-snap-llc, bit 2 is snap-llc.
| ||||
| CprotocolVlanTableStatus | 1.3.6.1.4.1.13464.1.2.4.2.1.8.14.1.1.4 | RowStatus | RW | |
column · RowStatus · read-write · current table entry status. | ||||
| TgDot1qProtocolVlanActionTable | 1.3.6.1.4.1.13464.1.2.4.2.1.8.14.2 | NA | ||
table · not-accessible · current This table is used to assign a VLAN for a packet based on the protocol(FrameType,EtherType)and the ingress port.only for marvell chip | ||||
| RgDot1qProtocolVlanActionEntry | 1.3.6.1.4.1.13464.1.2.4.2.1.8.14.2.1 | NA | ||
row · not-accessible · current Information about a vlan protocol aciton table entry. | ||||
| CprotocolVlanAcitonTablePort | 1.3.6.1.4.1.13464.1.2.4.2.1.8.14.2.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current port index. | ||||
| CprotocolVlanActionTableNewVlan | 1.3.6.1.4.1.13464.1.2.4.2.1.8.14.2.1.2 | VlanId | RW | |
column · VlanId · read-write · current new vlan id of packet. | ||||
| CprotocolVlanActionTableStatus | 1.3.6.1.4.1.13464.1.2.4.2.1.8.14.2.1.3 | RowStatus | RW | |
column · RowStatus · read-write · current table entry status. | ||||
| TgDot1qProtocolVlanAdminTable | 1.3.6.1.4.1.13464.1.2.4.2.1.8.14.3 | NA | ||
table · not-accessible · current This table is used to enable assign a VLAN for a packet based on the protocol(FrameType,EtherType)and the ingress port.only for marvell chip | ||||
| RgDot1qProtocolVlanAdminEntry | 1.3.6.1.4.1.13464.1.2.4.2.1.8.14.3.1 | NA | ||
row · not-accessible · current Information about a vlan protocol admin table entry. | ||||
| CprotocolVlanAdminTablePort | 1.3.6.1.4.1.13464.1.2.4.2.1.8.14.3.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current port index. | ||||
| CprotocolVlanAdminTableEnable | 1.3.6.1.4.1.13464.1.2.4.2.1.8.14.3.1.2 | TruthValue | RW | |
column · TruthValue · read-write · current enable protocol-based vlan function of a port. | ||||
| NgDot1qTranslateVlan | 1.3.6.1.4.1.13464.1.2.4.2.1.8.15 | |||
| TgDot1qTranslateVlanIngressTable | 1.3.6.1.4.1.13464.1.2.4.2.1.8.15.1 | NA | ||
table · not-accessible · current This table is used to classify a packet based on the protocol(FrameType,EtherType).only for marvell chip | ||||
| RgDot1qTranslateVlanIngressEntry | 1.3.6.1.4.1.13464.1.2.4.2.1.8.15.1.1 | NA | ||
| CtranslateVlanIngressTableIndex | 1.3.6.1.4.1.13464.1.2.4.2.1.8.15.1.1.1 | INTEGER (1..4094) | RO | |
column · INTEGER (1..4094) · read-only · current index of ingress vlan. | ||||
| CtranslateIngressTargetVlanID | 1.3.6.1.4.1.13464.1.2.4.2.1.8.15.1.1.2 | INTEGER (0..4094) | RW | |
column · INTEGER (0..4094) · read-write · current Target vlan ID. 0 means not set | ||||
| TgDot1qTranslateVlanEgressTable | 1.3.6.1.4.1.13464.1.2.4.2.1.8.15.2 | NA | ||
table · not-accessible · current This table is used to classify a packet based on the protocol(FrameType,EtherType).only for marvell chip | ||||
| RgDot1qTranslateVlanEgressEntry | 1.3.6.1.4.1.13464.1.2.4.2.1.8.15.2.1 | NA | ||
| CtranslateVlanEgressTableIndex | 1.3.6.1.4.1.13464.1.2.4.2.1.8.15.2.1.1 | INTEGER (1..4094) | RO | |
column · INTEGER (1..4094) · read-only · current index of Egress vlan. | ||||
| CtranslateEgressTargetVlanID | 1.3.6.1.4.1.13464.1.2.4.2.1.8.15.2.1.2 | INTEGER (0..4094) | RW | |
column · INTEGER (0..4094) · read-write · current Target vlan ID. 0 means not set | ||||
| TgDot1qTranslateVlanPortTable | 1.3.6.1.4.1.13464.1.2.4.2.1.8.15.3 | NA | ||
table · not-accessible · current translate vlan port list | ||||
| RgDot1qTranslateVlanPortEntry | 1.3.6.1.4.1.13464.1.2.4.2.1.8.15.3.1 | NA | ||
| CtranslateVlanTablePort | 1.3.6.1.4.1.13464.1.2.4.2.1.8.15.3.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current port index. | ||||
| CtranslateTargetVlanIngressTableEnable | 1.3.6.1.4.1.13464.1.2.4.2.1.8.15.3.1.2 | TruthValue | RW | |
column · TruthValue · read-write · current enable ingress Translate vlan function of a port.1:enable;2:disable | ||||
| CtranslateTargetVlanEgressTableEnable | 1.3.6.1.4.1.13464.1.2.4.2.1.8.15.3.1.3 | TruthValue | RW | |
column · TruthValue · read-write · current enable Egress Translate vlan function of a port.1:enable;2:disable | ||||
| NgarpMIBConformance | 1.3.6.1.4.1.13464.1.2.4.2.2 | |||
| NgarpMIBGroups | 1.3.6.1.4.1.13464.1.2.4.2.2.1 | |||
| GgarpMIBBaseGroup | 1.3.6.1.4.1.13464.1.2.4.2.2.1.1 | |||
group · current GARP module groups.
| ||||
| NgarpMIBCompliances | 1.3.6.1.4.1.13464.1.2.4.2.2.2 | |||
| MgarpMIBCompliance | 1.3.6.1.4.1.13464.1.2.4.2.2.2.1 | |||
Textual conventions
EnabledStatusINTEGERdisabled(2)enabled(1)A simple status value for the object.
PortListOCTET STRINGEach octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
TimeFilterTimeTicksTo be used for the index to a table. Allows an application to download only those rows changed since a particular time. A row is considered changed if the value of any object in the row changes or if the row is created or deleted. When sysUpTime is equal to zero, this table shall be empty. One entry exists for each past value of sysUpTime, except that the whole table is purged should sysUpTime wrap. As this basic row is updated new conceptual rows are created (which still share the now updated object values with all other instances). The number of instances which are created is determined by the value of sysUpTime at which the basic row was last updated. One instance will exist for each value of sysUpTime at the last update time for the row. A new timeMark instance is created for each new sysUpTime value. Each new conceptual row will be associated with the timeMark instance which was created at the value of sysUpTime with which the conceptual row is to be associated. By definition all conceptual rows were updated at or after time zero and so at least one conceptual row (associated with timeMark.0) must exist for each underlying (basic) row. See the appendix for further discussion of this variable. Consider the following fooTable: fooTable ... INDEX { fooTimeMark, fooIndex } FooEntry { fooTimeMark TimeFilter fooIndex INTEGER, fooCounts Counter } Should there be two basic rows in this table (fooIndex == 1, fooIndex == 2) and row 1 was updated most recently at time 6, while row 2 was updated most recently at time 8, and both rows had been updated on several earlier occasions such that the current values were 5 and 9 respectively then the following fooCounts instances would exist. fooCounts.0.1 5 fooCounts.0.2 9 fooCounts.1.1 5 fooCounts.1.2 9 fooCounts.2.1 5 fooCounts.2.2 9 fooCounts.3.1 5 fooCounts.3.2 9 fooCounts.4.1 5 fooCounts.4.2 9 fooCounts.5.1 5 fooCounts.5.2 9 fooCounts.6.1 5 fooCounts.6.2 9 fooCounts.7.2 9 -- note that row 1 doesn't exist for fooCounts.8.2 9 -- times 7 and 8VlanIdINTEGER (1..4094)A 12-bit VLAN ID used in the VLAN Tag header.
VlanIndexUnsigned32A value used to index per-VLAN tables: values of 0 and 4095 are not permitted; if the value is between 1 and 4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with global scope within a given bridged domain (see VlanId textual convention). If the value is greater than 4095 then it represents a VLAN with scope local to the particular agent, i.e. one without a global VLAN-ID assigned to it. Such VLANs are outside the scope of IEEE 802.1Q but it is convenient to be able to manage them in the same way using this MIB.