The errp MIB is targeted at easing errp configuration via snmp tools.
snmptranslate -m ERRP-MIB -Tpsnmpwalk -v2c -c <community> -m ERRP-MIB <host> 1.3.6.1.4.1.13464.1.2.4.7Imports
| ADMIN-MASTER-MIB | gbnL2 |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IerrpMib | 1.3.6.1.4.1.13464.1.2.4.7 | |||
identity The errp MIB is targeted at easing errp configuration via snmp tools. | ||||
| NerrpMIBObjects | 1.3.6.1.4.1.13464.1.2.4.7.1 | |||
| Nerrp | 1.3.6.1.4.1.13464.1.2.4.7.1.1 | |||
| SerrpOnoff | 1.3.6.1.4.1.13464.1.2.4.7.1.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/disable errp function for this bridge.
| ||||
| SerrpHealthTime | 1.3.6.1.4.1.13464.1.2.4.7.1.1.2 | Integer32 (1..10) | RW | |
scalar · Integer32 (1..10) · read-write · current The hello timer is used by master or edge node for ring health detection. The correct operational formula: FailedTimer >= 3 * HelloTimer | ||||
| SerrpHealthTimeout | 1.3.6.1.4.1.13464.1.2.4.7.1.1.3 | Integer32 (3..30) | RW | |
scalar · Integer32 (3..30) · read-write · current The timeout value used by master during ring health detection. The correct operational formula: FailedTimer >= 3 * HelloTimer | ||||
| SerrpMajorFaultTime | 1.3.6.1.4.1.13464.1.2.4.7.1.1.4 | Integer32 (2..29) | RO | |
scalar · Integer32 (2..29) · read-only · current The timeout value used by assitant edge during ring health detection. | ||||
| SerrpPrefwdTimeout | 1.3.6.1.4.1.13464.1.2.4.7.1.1.5 | Integer32 (3..30) | RO | |
scalar · Integer32 (3..30) · read-only · current The block timeout value used by node when portup event occurs. | ||||
| TerrpDomainTable | 1.3.6.1.4.1.13464.1.2.4.7.1.1.6 | NA | ||
table · not-accessible · current A table that contains domain-specific information. | ||||
| RerrpDomainEntry | 1.3.6.1.4.1.13464.1.2.4.7.1.1.6.1 | NA | ||
| CerrpDomainId | 1.3.6.1.4.1.13464.1.2.4.7.1.1.6.1.1 | Integer32 (0..15) | RO | |
column · Integer32 (0..15) · read-only · current The domain ID is used when network is managed in unit of domain, one domain should be a set of contiguous bridges. | ||||
| CerrpMVlanId | 1.3.6.1.4.1.13464.1.2.4.7.1.1.6.1.2 | Integer32 (1..4093) | RW | |
column · Integer32 (1..4093) · read-write · current The manage VLAN ID of the domain, can not be an existing vlan. | ||||
| CerrpWorkMode | 1.3.6.1.4.1.13464.1.2.4.7.1.1.6.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The work mode of the domain. If standard(1) is set, then the domain works on RFC3619 standard. If huaWei(2) is set, then the domain works on RRPP standard, and is able to work together with the Huawei equipment.
| ||||
| CerrpDomainRowStatus | 1.3.6.1.4.1.13464.1.2.4.7.1.1.6.1.4 | RowStatus | RW | |
column · RowStatus · read-write · current This object is used to create or delete a domain.
| ||||
| TerrpRingTable | 1.3.6.1.4.1.13464.1.2.4.7.1.1.7 | NA | ||
table · not-accessible · current A table that contains domain-and-ring-specific information. | ||||
| RerrpRingEntry | 1.3.6.1.4.1.13464.1.2.4.7.1.1.7.1 | NA | ||
row · not-accessible · current A list of information maintained by every ring.
| ||||
| CerrpRingId | 1.3.6.1.4.1.13464.1.2.4.7.1.1.7.1.1 | Integer32 (0..15) | RO | |
column · Integer32 (0..15) · read-only · current The identifier of ethernet ring which reside in a domain. | ||||
| CerrpRingLevel | 1.3.6.1.4.1.13464.1.2.4.7.1.1.7.1.2 | Integer32 (0..1) | RW | |
column · Integer32 (0..1) · read-write · current The ring level,0 means master ring, while 1 means sub ring. | ||||
| CerrpBrdgRole | 1.3.6.1.4.1.13464.1.2.4.7.1.1.7.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The bridge role in ethernet ring.
| ||||
| CerrpPriComPortId | 1.3.6.1.4.1.13464.1.2.4.7.1.1.7.1.4 | Integer32 (1..255) | RW | |
column · Integer32 (1..255) · read-write · current The primary port id when bridge is master or transmit,the common port id otherwise. | ||||
| CerrpSecEdgePortId | 1.3.6.1.4.1.13464.1.2.4.7.1.1.7.1.5 | Integer32 (1..255) | RW | |
column · Integer32 (1..255) · read-write · current The secondary port id when bridge is master or transmit,the edge port id otherwise. | ||||
| CerrpRingRowStatus | 1.3.6.1.4.1.13464.1.2.4.7.1.1.7.1.6 | RowStatus | RW | |
column · RowStatus · read-write · current This object indicates the status of this ring.
| ||||
| CerrpNodeState | 1.3.6.1.4.1.13464.1.2.4.7.1.1.7.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The node state in the ring. begin(0) means node is inactive or inital state. health(1) means master node detects the ring in a health state. fault(2) means master node detects the ring in a fault state. linkUp(3) means both ring ports of the transmit node are link up and in the forwarding state. linkDown(4) means at least one ring port of the transmit node is link down. preforwarding(5) means at least one ring port of the transmit node is just link up and in the blocking state. Edge node and assistant edge node are same as transmit node, but only concern about the edge port state.
| ||||
| CerrpPriComPortState | 1.3.6.1.4.1.13464.1.2.4.7.1.1.7.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The primary port or common port state in the ring. disabled(0) means port is link down. forwarding(1) means port is in the forwarding state. blocking(2) means port is in the blocking or discarding state.
| ||||
| CerrpSecEdgePortState | 1.3.6.1.4.1.13464.1.2.4.7.1.1.7.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current The secondary port or edge port state in the ring. disabled(0) means port is link down. forwarding(1) means port is in the forwarding state. blocking(2) means port is in the blocking or discarding state.
| ||||
| CerrpQuerySolicit | 1.3.6.1.4.1.13464.1.2.4.7.1.1.7.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable Query Solicit function of the ring.
| ||||
| TerrpRingStatsTable | 1.3.6.1.4.1.13464.1.2.4.7.1.1.8 | NA | ||
table · not-accessible · current This table contains statistics for the ERRP ring ports. | ||||
| RerrpRingStatsEntry | 1.3.6.1.4.1.13464.1.2.4.7.1.1.8.1 | NA | ||
row · not-accessible · current A list of statistics maintained by every ring port. The sequence is: (domain,ring,priComPort),(domain,ring,secEdgePort), (domain,next ring,priComPort),(domain,next ring,secEdgePort),..., (next domain,ring,priComPort),(next domain,ring,secEdgePort), (next domain,next ring,priComPort),......
| ||||
| CerrpRingPortId | 1.3.6.1.4.1.13464.1.2.4.7.1.1.8.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The port equals to errpPriComPortId or errpSecEdgePortId of the ring within errpRingTable. | ||||
| CerrpHealthTx | 1.3.6.1.4.1.13464.1.2.4.7.1.1.8.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current A count of the number of Health(or Hello) packets transmitted on this port. | ||||
| CerrpHealthRx | 1.3.6.1.4.1.13464.1.2.4.7.1.1.8.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current A count of the number of Health(or Hello) packets received on this port. | ||||
| CerrpCommonFlushTx | 1.3.6.1.4.1.13464.1.2.4.7.1.1.8.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current A count of the number of Common Flush packets transmitted on this port. | ||||
| CerrpCommonFlushRx | 1.3.6.1.4.1.13464.1.2.4.7.1.1.8.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current A count of the number of Common Flush packets received on this port. | ||||
| CerrpCompleteFlushTx | 1.3.6.1.4.1.13464.1.2.4.7.1.1.8.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current A count of the number of Complete Flush packets transmitted on this port. | ||||
| CerrpCompleteFlushRx | 1.3.6.1.4.1.13464.1.2.4.7.1.1.8.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current A count of the number of Complete Flush packets received on this port. | ||||
| CerrpLinkDownTx | 1.3.6.1.4.1.13464.1.2.4.7.1.1.8.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current A count of the number of Link Down packets transmitted on this port. | ||||
| CerrpLinkDownRx | 1.3.6.1.4.1.13464.1.2.4.7.1.1.8.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current A count of the number of Link Down packets received on this port. | ||||
| CerrpLinkUpTx | 1.3.6.1.4.1.13464.1.2.4.7.1.1.8.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current A count of the number of Link Up packets transmitted on this port. | ||||
| CerrpLinkUpRx | 1.3.6.1.4.1.13464.1.2.4.7.1.1.8.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current A count of the number of Link Up packets received on this port. | ||||
| CerrpEdgeHelloTx | 1.3.6.1.4.1.13464.1.2.4.7.1.1.8.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current A count of the number of Edge Hello packets transmitted on this port. | ||||
| CerrpEdgeHelloRx | 1.3.6.1.4.1.13464.1.2.4.7.1.1.8.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current A count of the number of Edge Hello packets received on this port. | ||||
| CerrpMajorFaultTx | 1.3.6.1.4.1.13464.1.2.4.7.1.1.8.1.14 | Counter32 | RO | |
column · Counter32 · read-only · current A count of the number of Major Fault packets transmitted on this port. | ||||
| CerrpMajorFaultRx | 1.3.6.1.4.1.13464.1.2.4.7.1.1.8.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current A count of the number of Major Fault packets received on this port. | ||||
| NerrpTrap | 1.3.6.1.4.1.13464.1.2.4.7.1.1.9 | |||
| !errpRingNodeStateChange | 1.3.6.1.4.1.13464.1.2.4.7.1.1.9.1 | |||
notification · current The node state in the ring turns to health or fault. health(1) means master node detects the ring in a health state. fault(2) means master node detects the ring in a fault state.
| ||||
| !errpPriComPortStateChange | 1.3.6.1.4.1.13464.1.2.4.7.1.1.9.2 | |||
notification · current The primary port or common port state in the ring turns to disabled, forwarding, or blocking. disabled(0) means port is link down. forwarding(1) means port is in the forwarding state. blocking(2) means port is in the blocking or discarding state.
| ||||
| !errpSecEdgePortStateChange | 1.3.6.1.4.1.13464.1.2.4.7.1.1.9.3 | |||
notification · current The secondary port or edge port state in the ring turns to disabled, forwarding, or blocking. disabled(0) means port is link down. forwarding(1) means port is in the forwarding state. blocking(2) means port is in the blocking or discarding state.
| ||||
Traps / Notifications
- errpPriComPortStateChange
1.3.6.1.4.1.13464.1.2.4.7.1.1.9.2 - errpRingNodeStateChange
1.3.6.1.4.1.13464.1.2.4.7.1.1.9.1 - errpSecEdgePortStateChange
1.3.6.1.4.1.13464.1.2.4.7.1.1.9.3