FOUNDRY-SN-MAC-VLAN-MIB
Brocade Communication Systems, Inc. (formerly 'Foundry Networks, Inc.')Management Information Base module for MAC-based Vlan configuration and statistics.
snmptranslate -m FOUNDRY-SN-MAC-VLAN-MIB -Tpsnmpwalk -v2c -c <community> -m FOUNDRY-SN-MAC-VLAN-MIB <host> 1.3.6.1.4.1.1991.1.1.3.30Imports
| IF-MIB | InterfaceIndex |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, internet, iso, private |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IsnMacVlan | 1.3.6.1.4.1.1991.1.1.3.30 | |||
identity Management Information Base module for MAC-based Vlan configuration and statistics. | ||||
| NsnMacVlanGlobalObjects | 1.3.6.1.4.1.1991.1.1.3.30.1 | |||
| SsnMacVlanGlobalClearOper | 1.3.6.1.4.1.1991.1.1.3.30.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current valid(0) - a SNMP-GET of this mib shows that it is valid command to use. clear(1) - represents clear operational MAC-based Vlan entry for all ports.
| ||||
| SsnMacVlanGlobalDynConfigState | 1.3.6.1.4.1.1991.1.1.3.30.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/disable MAC-based VLAN dynamic activation on the global level.
| ||||
| NsnMacVlanTableObjects | 1.3.6.1.4.1.1991.1.1.3.30.2 | |||
| TsnMacVlanPortMemberTable | 1.3.6.1.4.1.1991.1.1.3.30.2.1 | NA | ||
table · not-accessible · current MAC-based Vlan port membership table. | ||||
| RsnMacVlanPortMemberEntry | 1.3.6.1.4.1.1991.1.1.3.30.2.1.1 | NA | ||
row · not-accessible · current An entry of the MAC-based Vlan port membership table. | ||||
| CsnMacVlanPortMemberVLanId | 1.3.6.1.4.1.1991.1.1.3.30.2.1.1.1 | INTEGER (1..4095) | NA | |
column · INTEGER (1..4095) · not-accessible · current The VLAN identifier (VLAN ID). | ||||
| CsnMacVlanPortMemberPortId | 1.3.6.1.4.1.1991.1.1.3.30.2.1.1.2 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The ifIndex which is a member of the MAC-based VLAN. | ||||
| CsnMacVlanPortMemberRowStatus | 1.3.6.1.4.1.1991.1.1.3.30.2.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row If the row exists, then a SET with value of create(4) returns error 'wrongValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid
| ||||
| TsnMacVlanIfTable | 1.3.6.1.4.1.1991.1.1.3.30.2.2 | NA | ||
table · not-accessible · current MAC-based Vlan Interface table. | ||||
| RsnMacVlanIfEntry | 1.3.6.1.4.1.1991.1.1.3.30.2.2.1 | NA | ||
| CsnMacVlanIfIndex | 1.3.6.1.4.1.1991.1.1.3.30.2.2.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The ifIndex which is a member of the MAC-based VLAN. | ||||
| CsnMacVlanIfEnable | 1.3.6.1.4.1.1991.1.1.3.30.2.2.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The administrative status requested by management for MAC-based Vlan on this interface. The value enabled(1) indicates that MAC-based Vlan should be enabled on this interface, When disabled(2), MAC-based Vlan is disabled on this interface. Enable/disable MAC-based Vlan on this interface.
| ||||
| CsnMacVlanIfMaxEntry | 1.3.6.1.4.1.1991.1.1.3.30.2.2.1.3 | Integer32 (2..32) | RW | |
column · Integer32 (2..32) · read-write · current The maximum number of allowed and denied MAC address (static and dynamic) that can be leared on an interface. The default value is 2. The value should be between 2 to 32. | ||||
| CsnMacVlanIfClearOper | 1.3.6.1.4.1.1991.1.1.3.30.2.2.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current valid(0) - a SNMP-GET of this mib shows that it is valid command to use. clear(1) - represents clearing operational MAC-based Vlan entry for a port.
| ||||
| CsnMacVlanIfClearConfig | 1.3.6.1.4.1.1991.1.1.3.30.2.2.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current valid(0) - a SNMP-GET of this mib shows that it is valid command to use. clear(1) - represents clearing configured MAC-based Vlan entry for a port.
| ||||
| TsnMacBasedVlanTable | 1.3.6.1.4.1.1991.1.1.3.30.2.3 | NA | ||
table · not-accessible · current MAC-based Vlan table. | ||||
| RsnMacBasedVlanEntry | 1.3.6.1.4.1.1991.1.1.3.30.2.3.1 | NA | ||
row · not-accessible · current An entry in the MAC-based Vlan table. | ||||
| CsnMacBasedVlanId | 1.3.6.1.4.1.1991.1.1.3.30.2.3.1.1 | INTEGER (1..4095) | NA | |
column · INTEGER (1..4095) · not-accessible · current The ID of a VLAN of which this port is a mac-vlan-permit member. Port must be untagged. This object return 0 which is an invalid VLAN ID value. | ||||
| CsnMacBasedVlanMac | 1.3.6.1.4.1.1991.1.1.3.30.2.3.1.2 | MacAddress | NA | |
column · MacAddress · not-accessible · current A host source MAC address to be authenticated. | ||||
| CsnMacBasedVlanPriority | 1.3.6.1.4.1.1991.1.1.3.30.2.3.1.3 | Integer32 (0..7) | RW | |
column · Integer32 (0..7) · read-write · current The priority of the source MAC address. | ||||
| CsnMacBasedVlanRowStatus | 1.3.6.1.4.1.1991.1.1.3.30.2.3.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row If the row exists, then a SET with value of create(4) returns error 'wrongValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuchName...no such row other(1).....some other cases valid(2)....the row exists and is valid
| ||||