SYSTEM-MIB
Brocade Communications Systems, Inc.The MIB module is for system information.
Copyright (c) 2018 Extreme Networks, Inc.
All rights reserved.snmptranslate -m SYSTEM-MIB -Tpsnmpwalk -v2c -c <community> -m SYSTEM-MIB <host> 1.3.6.1.4.1.1588.2.1.1.1.1Imports
| Brocade-TC | SwPortIndex, SwSensorIndex |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
| SWBASE-MIB | sw |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NswTrapsV2 | 1.3.6.1.4.1.1588.2.1.1.1.0 | ||||||||||||||||||||
node · current The Traps for Extreme's Switch. | |||||||||||||||||||||
| !swEventTrap | 1.3.6.1.4.1.1588.2.1.1.1.0.4 | ||||||||||||||||||||
notification · current This trap is generated when an event whose level at or below swEventTrapLevel occurs. | |||||||||||||||||||||
| !swStateChangeTrap | 1.3.6.1.4.1.1588.2.1.1.1.0.12 | ||||||||||||||||||||
notification · current This trap is sent whenever switch state changes to online/offline
| |||||||||||||||||||||
| IswSystem | 1.3.6.1.4.1.1588.2.1.1.1.1 | ||||||||||||||||||||
identity The MIB module is for system information.
Copyright (c) 2018 Extreme Networks, Inc.
All rights reserved. | |||||||||||||||||||||
| SswCurrentDate | 1.3.6.1.4.1.1588.2.1.1.1.1.1 | DisplayString (SIZE (0..64)) | RO | ||||||||||||||||||
scalar · DisplayString (SIZE (0..64)) · read-only · current The current date information in displayable textual format. | |||||||||||||||||||||
| SswBootDate | 1.3.6.1.4.1.1588.2.1.1.1.1.2 | DisplayString (SIZE (0..64)) | RO | ||||||||||||||||||
scalar · DisplayString (SIZE (0..64)) · read-only · current The date and time when the system last booted, in displayable textual format. | |||||||||||||||||||||
| SswFWLastUpdated | 1.3.6.1.4.1.1588.2.1.1.1.1.3 | DisplayString (SIZE (0..64)) | RO | ||||||||||||||||||
scalar · DisplayString (SIZE (0..64)) · read-only · current The information indicates the date when the firmware was last updated, in displayable textual format. | |||||||||||||||||||||
| SswFlashLastUpdated | 1.3.6.1.4.1.1588.2.1.1.1.1.4 | DisplayString (SIZE (0..64)) | RO | ||||||||||||||||||
scalar · DisplayString (SIZE (0..64)) · read-only · current The information indicates the date when the FLASH was last updated, in displayable textual format. | |||||||||||||||||||||
| SswBootPromLastUpdated | 1.3.6.1.4.1.1588.2.1.1.1.1.5 | DisplayString (SIZE (0..64)) | RO | ||||||||||||||||||
scalar · DisplayString (SIZE (0..64)) · read-only · current The information indicates the date when the boot PROM was last updated, in displayable textual format. | |||||||||||||||||||||
| SswFirmwareVersion | 1.3.6.1.4.1.1588.2.1.1.1.1.6 | DisplayString (SIZE (0..24)) | RO | v8.1.2g | |||||||||||||||||
scalar · DisplayString (SIZE (0..24)) · read-only · current The current version of the firwmare. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SswOperStatus | 1.3.6.1.4.1.1588.2.1.1.1.1.7 | INTEGER | RO | online(1) | |||||||||||||||||
scalar · INTEGER · read-only · current The current operational status of the switch. The states are as follow: o online(1) means the switch is accessible by an external port; o offline(2) means the switch is not accessible; o testing(3) means the switch is in a built-in test mode and is not accessible by an external port; o faulty(4) means the switch is not operational.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SswSsn | 1.3.6.1.4.1.1588.2.1.1.1.1.10 | DisplayString (SIZE (0..128)) | RO | AB12C34 | |||||||||||||||||
scalar · DisplayString (SIZE (0..128)) · read-only · current The soft serial number of the switch. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SswBeaconOperStatus | 1.3.6.1.4.1.1588.2.1.1.1.1.18 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The current operational status of the switch beacon. When the beacon is on, the LEDs on the front panel of the switch run alternately from left to right and right to left. The color is yellow. When the beacon is off, each LED will be in their its regular status indicating color and state.
| |||||||||||||||||||||
| SswBeaconAdmStatus | 1.3.6.1.4.1.1588.2.1.1.1.1.19 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The desired status of the switch beacon. When the beacon is set to on, the LEDs on the front panel of the switch run alternately from left to right and right to left. The color is yellow. When the beacon is set to off, each LED will be in its regular status indicating color and state.
| |||||||||||||||||||||
| SswDiagResult | 1.3.6.1.4.1.1588.2.1.1.1.1.20 | INTEGER | RO | sw-ok(1) | |||||||||||||||||
scalar · INTEGER · read-only · current The result of the power-on startup (POST) diagnostics.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SswNumSensors | 1.3.6.1.4.1.1588.2.1.1.1.1.21 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
scalar · Integer32 (0..2147483647) · read-only · current The number of sensors inside the switch. | |||||||||||||||||||||
| TswSensorTable | 1.3.6.1.4.1.1588.2.1.1.1.1.22 | NA | |||||||||||||||||||
table · not-accessible · current The table of sensor entries. | |||||||||||||||||||||
| RswSensorEntry | 1.3.6.1.4.1.1588.2.1.1.1.1.22.1 | NA | |||||||||||||||||||
| CswSensorIndex | 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.1 | SwSensorIndex | RO | 1 | |||||||||||||||||
| CswSensorType | 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.2 | INTEGER | RO | temperature(1) | |||||||||||||||||
| CswSensorStatus | 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.3 | INTEGER | RO | nominal(4) | |||||||||||||||||
column · INTEGER · read-only · current The current status of the sensor.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CswSensorValue | 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.4 | Integer32 | RO | 42 | |||||||||||||||||
column · Integer32 · read-only · current The current value (reading) of the sensor. The value, -2147483648, represents an unknown quantity. It also means that the sensor does not have the capability to measure the actual value. In V2.0, the temperature sensor value will be in Celsius; the fan value will be in RPM (revolution per minute); and the power supply sensor reading will be unknown. | |||||||||||||||||||||
| CswSensorInfo | 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.5 | DisplayString (SIZE (0..255)) | RO | SLOT #0: TEMP #1 | |||||||||||||||||
column · DisplayString (SIZE (0..255)) · read-only · current Additional displayable information on the sensor. In V2.x, it contains the sensor type and number in textual format. For example, 'Temp 3', 'Fan 6'. | |||||||||||||||||||||
| SswID | 1.3.6.1.4.1.1588.2.1.1.1.1.24 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The number of the logical switch (0/1). | |||||||||||||||||||||
| SswEtherIPAddress | 1.3.6.1.4.1.1588.2.1.1.1.1.25 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The IP Address of the Ethernet interface of this logical switch. | |||||||||||||||||||||
| SswEtherIPMask | 1.3.6.1.4.1.1588.2.1.1.1.1.26 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The IP Mask of the Ethernet interface of this logical switch. | |||||||||||||||||||||
| SswIPv6Address | 1.3.6.1.4.1.1588.2.1.1.1.1.29 | DisplayString | NA | ||||||||||||||||||
scalar · DisplayString · not-accessible · current IPV6 address. | |||||||||||||||||||||
| SswIPv6Status | 1.3.6.1.4.1.1588.2.1.1.1.1.30 | INTEGER | NA | ||||||||||||||||||
scalar · INTEGER · not-accessible · current The current status of ipv6 address.
| |||||||||||||||||||||
| NswEvent | 1.3.6.1.4.1.1588.2.1.1.1.8 | ||||||||||||||||||||
node · current The OID sub-tree for swEvent group. | |||||||||||||||||||||
| SswEventTrapLevel | 1.3.6.1.4.1.1588.2.1.1.1.8.1 | INTEGER | RW | deprecated | |||||||||||||||||
scalar · INTEGER · read-write · deprecated swAgtTrapSeverityLevel, in absence of swEventTrapLevel, specifies the Trap Severity Level of each defined trap recipient host. This object specifies the swEventTrap level in conjunction with an event's severity level. When an event occurs and if its severity level is at or below the value specified by this object instance, the agent will send the associated swEventTrap to configured recipients.
| |||||||||||||||||||||
| SswEventNumEntries | 1.3.6.1.4.1.1588.2.1.1.1.8.4 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
scalar · Integer32 (0..2147483647) · read-only · current The number of entries in the Event Table. | |||||||||||||||||||||
| TswEventTable | 1.3.6.1.4.1.1588.2.1.1.1.8.5 | NA | |||||||||||||||||||
table · not-accessible · current The table of event entries. | |||||||||||||||||||||
| RswEventEntry | 1.3.6.1.4.1.1588.2.1.1.1.8.5.1 | NA | |||||||||||||||||||
| CswEventIndex | 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.1 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current This object identifies the event entry. | |||||||||||||||||||||
| CswEventTimeInfo | 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.2 | DisplayString (SIZE (0..64)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..64)) · read-only · current This object identifies the date and time when this event occurred, in textual format. | |||||||||||||||||||||
| CswEventLevel | 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This object identifies the severity level of this event entry.
| |||||||||||||||||||||
| CswEventRepeatCount | 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.4 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current This object identifies how many times this particular event has occurred. | |||||||||||||||||||||
| CswEventDescr | 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current This object identifies the textual description of the event. | |||||||||||||||||||||
| CswEventVfId | 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.6 | Integer32 (0..255) | RO | ||||||||||||||||||
column · Integer32 (0..255) · read-only · current This object identifies the Virtual fabric id. | |||||||||||||||||||||
| NswCpuOrMemoryUsage | 1.3.6.1.4.1.1588.2.1.1.1.26 | ||||||||||||||||||||
node · current The OID sub-tree for cpu or mem usage group. | |||||||||||||||||||||
| SswCpuUsage | 1.3.6.1.4.1.1588.2.1.1.1.26.1 | Integer32 (0..100) | RO | 42 | |||||||||||||||||
scalar · Integer32 (0..100) · read-only · current System's cpu usage. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SswCpuNoOfRetries | 1.3.6.1.4.1.1588.2.1.1.1.26.2 | Integer32 (1..100) | RO | ||||||||||||||||||
scalar · Integer32 (1..100) · read-only · current Number of times system should take cpu utilization sample before sending the CPU utilization trap. | |||||||||||||||||||||
| SswCpuUsageLimit | 1.3.6.1.4.1.1588.2.1.1.1.26.3 | Integer32 (1..100) | RO | ||||||||||||||||||
scalar · Integer32 (1..100) · read-only · current CPU usage limit | |||||||||||||||||||||
| SswCpuPollingInterval | 1.3.6.1.4.1.1588.2.1.1.1.26.4 | Integer32 (10..3600) | RO | ||||||||||||||||||
scalar · Integer32 (10..3600) · read-only · current Time interval between two memory samples.
| |||||||||||||||||||||
| SswCpuAction | 1.3.6.1.4.1.1588.2.1.1.1.26.5 | Integer32 (0..3) | RO | ||||||||||||||||||
scalar · Integer32 (0..3) · read-only · current Specifies the actions to be taken if system resources exceed the specified threshold.
| |||||||||||||||||||||
| SswMemUsage | 1.3.6.1.4.1.1588.2.1.1.1.26.6 | Integer32 | RO | 18 | |||||||||||||||||
scalar · Integer32 · read-only · current System's memory usage. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SswMemNoOfRetries | 1.3.6.1.4.1.1588.2.1.1.1.26.7 | Integer32 (1..100) | RO | ||||||||||||||||||
scalar · Integer32 (1..100) · read-only · current Number of times system should take memory usage sample before sending the memory usage trap. | |||||||||||||||||||||
| SswMemUsageLimit | 1.3.6.1.4.1.1588.2.1.1.1.26.8 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current Memory usage limit | |||||||||||||||||||||
| SswMemPollingInterval | 1.3.6.1.4.1.1588.2.1.1.1.26.9 | Integer32 (10..3600) | RO | ||||||||||||||||||
scalar · Integer32 (10..3600) · read-only · current Time interval between two memory samples.
| |||||||||||||||||||||
| SswMemAction | 1.3.6.1.4.1.1588.2.1.1.1.26.10 | Integer32 (0..3) | RO | ||||||||||||||||||
scalar · Integer32 (0..3) · read-only · current Specifies the actions to be taken if system resources exceed the specified threshold.
| |||||||||||||||||||||
Textual conventions
FcPortFlagBitsphysical(0)virtual(1)Represents the port status for a FC Flag. Currently this will indicate if the port is virtual or physical.
Traps / Notifications
- swEventTrap
1.3.6.1.4.1.1588.2.1.1.1.0.4 - swStateChangeTrap
1.3.6.1.4.1.1588.2.1.1.1.0.12