EXTREME-VLAN-MIB
Extreme NetworksExtreme Virtual LAN objects
snmptranslate -m EXTREME-VLAN-MIB -Tpsnmpwalk -v2c -c <community> -m EXTREME-VLAN-MIB <host> 1.3.6.1.4.1.1916.1.2Imports
| EXTREME-BASE-MIB | PortList, extremeAgent |
|---|---|
| EXTREME-SYSTEM-MIB | extremeSlotNumber |
| IF-MIB | InterfaceIndex, InterfaceIndexOrZero |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IextremeVlan | 1.3.6.1.4.1.1916.1.2 | |||
identity Extreme Virtual LAN objects | ||||
| NextremeVlanGroup | 1.3.6.1.4.1.1916.1.2.1 | |||
| TextremeVlanGlobalMappingTable | 1.3.6.1.4.1.1916.1.2.1.1 | NA | deprecated | |
table · not-accessible · deprecated This table lists VLAN interfaces that are globally identified. A single entry exists in this list for each VLAN interface in the system that is bound to a global identifier. | ||||
| RextremeVlanGlobalMappingEntry | 1.3.6.1.4.1.1916.1.2.1.1.1 | NA | ||
row · not-accessible · current An individual VLAN interface global mapping entry. Entries in this table are created by setting the extremeVlanIfGlobalIdentifier object in the extremeVlanIfTable to a non-zero value. | ||||
| CextremeVlanGlobalMappingIdentifier | 1.3.6.1.4.1.1916.1.2.1.1.1.1 | INTEGER (0..65535) | RO | |
column · INTEGER (0..65535) · read-only · current An index into the extremeVlanGlobalMappingTable and an administratively assigned global VLAN identifier. The value of this object globally identifies the VLAN interface. For VLAN interfaces, on different network devices, which are part of the same globally identified VLAN, the value of this object will be the same. | ||||
| CextremeVlanGlobalMappingIfIndex | 1.3.6.1.4.1.1916.1.2.1.1.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The value of extremeVlanIfIndex for the VLAN interface in the extremeVlanIfTable, which is bound to the global identifier specified by this entry. | ||||
| TextremeVlanIfTable | 1.3.6.1.4.1.1916.1.2.1.2 | NA | ||
table · not-accessible · current This table lists VLAN interfaces that exist within a device. A single entry exists in this list for each VLAN interface in the system. A VLAN interface may be created, destroyed and/or mapped to a globally identified vlan. | ||||
| RextremeVlanIfEntry | 1.3.6.1.4.1.1916.1.2.1.2.1 | NA | ||
row · not-accessible · current An individual VLAN interface entry. When an NMS wishes to create a new entry in this table, it must obtain a non-zero index from the extremeNextAvailableVirtIfIndex object. Row creation in this table will fail if the chosen index value does not match the current value returned from the extremeNextAvailableVirtIfIndex object.
| ||||
| CextremeVlanIfIndex | 1.3.6.1.4.1.1916.1.2.1.2.1.1 | Integer32 | RC | |
column · Integer32 · read-create · current The index value of this row and the vlan's ifIndex in the ifTable. The NMS obtains the index value for this row by reading the extremeNextAvailableVirtIfIndex object. | ||||
| CextremeVlanIfDescr | 1.3.6.1.4.1.1916.1.2.1.2.1.2 | DisplayString (SIZE (0..32)) | RC | |
column · DisplayString (SIZE (0..32)) · read-create · current This is a description of the VLAN interface. | ||||
| CextremeVlanIfType | 1.3.6.1.4.1.1916.1.2.1.2.1.3 | ExtremeVlanType | RC | |
column · ExtremeVlanType · read-create · current The VLAN interface type. | ||||
| CextremeVlanIfGlobalIdentifier | 1.3.6.1.4.1.1916.1.2.1.2.1.4 | INTEGER (0..65535) | RC | deprecated |
column · INTEGER (0..65535) · read-create · deprecated An administratively assigned global VLAN identifier. For VLAN interfaces, on different network devices, which are part of the same globally identified VLAN, the value of this object will be the same. The binding between a global identifier and a VLAN interface can be created or removed. To create a binding an NMS must write a non-zero value to this object. To delete a binding, the NMS must write a zero to this object. The value 1 is reserved for the default VLAN and this cannot be deleted or re-assigned. | ||||
| CextremeVlanIfStatus | 1.3.6.1.4.1.1916.1.2.1.2.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current The status column for this VLAN interface.
This OBJECT can be set to:
active(1)
createAndGo(4)
createAndWait(5)
destroy(6)
The following values may be read:
active(1)
notInService(2)
notReady(3).
Setting this object to createAndGo(4) causes the agent
to attempt to create and commit the row based on
the contents of the objects in the row. If all necessary
information is present in the row and the values are
acceptible to the agent, the agent will change the
status to active(1). If any of the necessary objects
are not available, the agent will reject the creation
request.
Setting this object to createAndWait(5) causes a row
in this table to be created. The agent sets the
status to notInService(2) if all of the information is
present in the row and the values are acceptable to the
agent; otherwise, the agent sets the status to notReady(3).
Setting this object to active(1) is only valid when
the current status is active(1) or notInService(2).
When the state of the row transitions is set to active(1),
the agent creates the corresponding row in the ifTable.
Setting this object to destroy(6) will remove the
corresponding VLAN interface, remove the entry in this
table, and the corresponding entries in the
extremeVlanGlobalMappingTable and the ifTable.
In order for a set of this object to destroy(6) to succeed,
all dependencies on this row must have been removed. These
will include any stacking dependencies in the ifStackTable
and any protocol specific tables dependencies. | ||||
| CextremeVlanIfIgnoreStpFlag | 1.3.6.1.4.1.1916.1.2.1.2.1.7 | TruthValue | RW | |
column · TruthValue · read-write · current Enable/disable STP for this VLAN interface. Setting this object to true will cause the ports on this VLAN to ignore STP BPDUs. When a vlan is first created, the Default value is FALSE, which means that the VLAN uses STP port information | ||||
| CextremeVlanIfIgnoreBpduFlag | 1.3.6.1.4.1.1916.1.2.1.2.1.8 | TruthValue | RW | |
column · TruthValue · read-write · current Setting this object to true causes this VLAN's BPDU's to be ignored by the Spanning Tree process. This can be used to keep the root bridge within one's own network when external switches also fall within the same Spanning Tree Domain. When a vlan is first created, the Default value is FALSE. | ||||
| CextremeVlanIfLoopbackModeFlag | 1.3.6.1.4.1.1916.1.2.1.2.1.9 | TruthValue | RW | |
column · TruthValue · read-write · current Setting this object to true causes loopback mode to be enabled on this VLAN. | ||||
| CextremeVlanIfVlanId | 1.3.6.1.4.1.1916.1.2.1.2.1.10 | Integer32 (1..4095) | RW | |
column · Integer32 (1..4095) · read-write · current The VLAN ID of this VLAN. | ||||
| CextremeVlanIfEncapsType | 1.3.6.1.4.1.1916.1.2.1.2.1.11 | ExtremeVlanEncapsType | RC | |
column · ExtremeVlanEncapsType · read-create · current The encapsulation algorithm used when encapsulating packets transmitted, or de-encapsulating packets received through this interface. | ||||
| CextremeVlanIfAdminStatus | 1.3.6.1.4.1.1916.1.2.1.2.1.12 | TruthValue | RW | |
column · TruthValue · read-write · current Enable/disable this VLAN interface. Setting this object to true will administratively enable this VLAN. | ||||
| NextremeVirtualGroup | 1.3.6.1.4.1.1916.1.2.2 | |||
| SextremeNextAvailableVirtIfIndex | 1.3.6.1.4.1.1916.1.2.2.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The value of the next available virtual ifIndex. This
object is used by an NMS to select an index value
for row-creation in tables indexed by ifIndex. The
current value of this object is changed to a new
value when the current value is written to an agent's
table, that is indexed by ifIndex. Row creation
using the current value of this object, allocates
a virtual ifIndex. Note the following:
1. A newly created row does not have to be active(1)
for the agent to allocate the virtual ifIndex.
2. Race conditions between multiple NMS's end when
a row is created. Rows are deemed created when
a setRequest is successfully committed (i.e.
the errorStats is noError(0)).
3. An agent that exhausts its supply of virual
ifIndex values returns zero as the value of this
object. This can be used by an NMS as an indication
to deleted unused rows and reboot the device. | ||||
| NextremeEncapsulationGroup | 1.3.6.1.4.1.1916.1.2.3 | |||
| TextremeVlanEncapsIfTable | 1.3.6.1.4.1.1916.1.2.3.1 | NA | ||
table · not-accessible · current This table lists VLAN encapsulation interfaces that exist within a device. A single entry exists in this list for each VLAN encapsulation interface in the system. A VLAN encapsulation interface may be created or destroyed. | ||||
| RextremeVlanEncapsIfEntry | 1.3.6.1.4.1.1916.1.2.3.1.1 | NA | ||
row · not-accessible · current An individual VLAN encapsulation interface entry. When an NMS wishes to create a new entry in this table, it must obtain a non-zero index from the extremeNextAvailableVirtIfIndex object. Row creation in this table will fail if the chosen index value does not match the current value returned from the extremeNextAvailableVirtIfIndex object. | ||||
| CextremeVlanEncapsIfIndex | 1.3.6.1.4.1.1916.1.2.3.1.1.1 | Integer32 | RC | |
column · Integer32 · read-create · current The index value of this row and the encapsulation interface's ifIndex in the ifTable. The NMS obtains the index value used for creating a row in this table by reading the extremeNextAvailableVirtIfIndex object. | ||||
| CextremeVlanEncapsIfType | 1.3.6.1.4.1.1916.1.2.3.1.1.2 | ExtremeVlanEncapsType | RC | |
column · ExtremeVlanEncapsType · read-create · current The encapsulation algorithm used when encapsulating packets transmitted, or de-encapsulating packets received through this interface. | ||||
| CextremeVlanEncapsIfTag | 1.3.6.1.4.1.1916.1.2.3.1.1.3 | Integer32 | RC | |
column · Integer32 · read-create · current The tag used when encapsulating packets transmitted, or de-encapsulating packets received through this interface. | ||||
| CextremeVlanEncapsIfStatus | 1.3.6.1.4.1.1916.1.2.3.1.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current The row status for this VLAN encapsulation interface.
This OBJECT can be set to:
active(1)
createAndGo(4)
createAndWait(5)
destroy(6)
The following values may be read:
active(1)
notReady(3).
In order for a row to become active, the NMS must set
extremeVlanEncapsIfTagType and extremeVlanEncapsIfTag
to some valid and consistent values.
Setting this object to createAndGo(4) causes the agent
to attempt to create and commit the row based on the
contents of the objects in the row. If all necessary
information is present in the row, the agent will
create the row and change the status to active(1). If
any of the necessary objects are not available, or
specify an invalid configuration, the row will not be
created and the agent will return an appropriate error.
Setting this object to createAndWait(5) causes a row in
in this table to be created. If all necessary objects
in the row have been assigned values and specify a
valid configuration, the status of the row will be set
to notInService(2); otherwise, the status will be set
to notReady(3).
This object may only be set to createAndGo(4) or
createAndWait(5) if it does not exist.
Setting this object to active(1) when the status is
notInService(2) causes the agent to commit the
row. Setting this object to active(1) when its value
is already active(1) is a no-op.
Setting this object to destroy(6) will remove the
corresponding VLAN encapsulation interface, remove the
entry in this table, and remove the corresponding entry
in the ifTable.
In order for a set of this object to destroy(6) to
succeed, all dependencies on this row must have been
removed. These will include any references to this
interface in the ifStackTable. | ||||
| NextremeVlanIpGroup | 1.3.6.1.4.1.1916.1.2.4 | |||
| TextremeVlanIpTable | 1.3.6.1.4.1.1916.1.2.4.1 | NA | ||
table · not-accessible · current A list of IP VLAN interface information entries. Entries in this table are related to entries in the extremeVlanIfTable by using the same index. | ||||
| RextremeVlanIpEntry | 1.3.6.1.4.1.1916.1.2.4.1.1 | NA | ||
row · not-accessible · current A extremeVlanIpEntry contains layer 3 information about a particular IP VLAN interface.
| ||||
| CextremeVlanIpNetAddress | 1.3.6.1.4.1.1916.1.2.4.1.1.1 | IpAddress | RC | |
column · IpAddress · read-create · current The IP network number for the IP VLAN interface defined in the extremeVlanIfTable identified with the same index. | ||||
| CextremeVlanIpNetMask | 1.3.6.1.4.1.1916.1.2.4.1.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The IP network mask corresponding to the IP Network address defined by extremeVlanIpIpNetAddress. | ||||
| CextremeVlanIpStatus | 1.3.6.1.4.1.1916.1.2.4.1.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current The status column for this IP VLAN entry.
This object can be set to:
active(1)
createAndGo(4)
destroy(6)
The following values may be read:
active(1)
Setting this object to active(1) or createAndGo(4) causes
the agent to attempt to create and commit the row based on
the contents of the objects in the row. If all necessary
information is present in the row and the values are
acceptible to the agent, the agent will change the
status to active(1). If any of the necessary objects
are not available, the agent will reject the row
creation request.
Setting this object to createAndWait(5) is not supported.
When the status changes to active(1), the agent applies the
IP parmeters to the IP VLAN interface identified by the
corresponding value of the extremeVlanIpIndex object.
Setting this object to destroy(6) will remove the IP
parmeters from the IP VLAN interface and remove the
entry from this table. | ||||
| CextremeVlanIpForwardingState | 1.3.6.1.4.1.1916.1.2.4.1.1.4 | TruthValue | RC | |
column · TruthValue · read-create · current Indicates whether the IP Forwarding on this Vlan is Enable or not. A true value indicates that the Vlan is Enable. | ||||
| NextremeProtocolGroup | 1.3.6.1.4.1.1916.1.2.5 | |||
| TextremeVlanProtocolTable | 1.3.6.1.4.1.1916.1.2.5.1 | NA | ||
table · not-accessible · current Table of defined combinations of protocol IDs that make up one protocol definition name. All members of one protocol definition share the same extremeVlanProtocolIndex. A given protocol ID may appear in the definition of just one protocol definition. This table will typically contain some default entries for popular protocols chosen by ExtremeWare. | ||||
| RextremeVlanProtocolEntry | 1.3.6.1.4.1.1916.1.2.5.1.1 | NA | ||
row · not-accessible · current One member protocol ID of a protocol definition. | ||||
| CextremeVlanProtocolIndex | 1.3.6.1.4.1.1916.1.2.5.1.1.1 | INTEGER (0..255) | RC | |
column · INTEGER (0..255) · read-create · current An index representing a protocol grouping of protocol ID values. A limited number of protocol groupings may be defined (up to 7 in ExtremeWare and 16 in EXOS). 0 is used for internal purposes. | ||||
| CextremeVlanProtocolIdIndex | 1.3.6.1.4.1.1916.1.2.5.1.1.2 | INTEGER (0..16) | RC | |
column · INTEGER (0..16) · read-create · current An index representing a particular protocol ID within a protocol grouping. A limited number of protocol IDs may be defined per extremeVlanProtocolIndex (up to 6 in ExtremeWare and 16 in EXOS). 0 is used for internal purposes. | ||||
| CextremeVlanProtocolName | 1.3.6.1.4.1.1916.1.2.5.1.1.3 | DisplayString (SIZE (1..32)) | RC | |
column · DisplayString (SIZE (1..32)) · read-create · current A human-readable string representing this protocol. This string should be the same for all entries sharing a given extremeVlanProtocolIndex. A ExtremeVlanProtocolEntry with extremeVlanProtocolName of ANY represents a match on all protocols: this entry may not be modified. | ||||
| CextremeVlanProtocolDllEncapsType | 1.3.6.1.4.1.1916.1.2.5.1.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current Represents the type of data-link encapsulation in which the extremeVlanProtocolId protocol ID is carried. The value any(1) is used to indicate a wildcard and matches all encapsulations and protocol IDs that are not explicitly mentioned in this table. Entries of type any(1) may not be created. The value none(5) is used to indicate that no protocol IDs match this entry. A value of none(5) may not be set by a manager.
| ||||
| CextremeVlanProtocolId | 1.3.6.1.4.1.1916.1.2.5.1.1.5 | INTEGER (0..65535) | RC | |
column · INTEGER (0..65535) · read-create · current The protocol ID: for entries of type ethertype(2) or llcSnapEthertype(4) this represents a 16-bit protocol ID. For entries of type llc(3) it represents a concatenation of LLC DSAP+SSAP in network byte order. This value is not valid for extremeVlanProtocolDllEncapsType values of any(1) or none(5). | ||||
| CextremeVlanProtocolStatus | 1.3.6.1.4.1.1916.1.2.5.1.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current The row status variable, used according to row installation and removal conventions. | ||||
| CextremeVlanProtocolDestAddress | 1.3.6.1.4.1.1916.1.2.5.1.1.7 | MacAddress | RC | |
column · MacAddress · read-create · current The destination MAC Address of the protocol. If the protocol does not have a defined destination MAC address, then extremeVlanProtocolDestAddressValid must be set to false. | ||||
| CextremeVlanProtocolDestAddressValid | 1.3.6.1.4.1.1916.1.2.5.1.1.8 | TruthValue | RC | |
column · TruthValue · read-create · current Indicates whether the protocol defines a destination MAC address or not. If the protocol defines a destination MAC address, this field should be set to true and extremeVlanProtocolDestAddressValid must be set to the destination MAC address for the protocol. | ||||
| CextremeVlanProtocolUserFieldOffset | 1.3.6.1.4.1.1916.1.2.5.1.1.9 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current The offset of the user defined field, from the start of the PDU. | ||||
| CextremeVlanProtocolUserFieldValue | 1.3.6.1.4.1.1916.1.2.5.1.1.10 | OCTET STRING (SIZE (0..16)) | RC | |
column · OCTET STRING (SIZE (0..16)) · read-create · current The value of the user defined field. If the protocol does not use user defined fields, this object must be set to zero length. | ||||
| CextremeVlanProtocolUserFieldMask | 1.3.6.1.4.1.1916.1.2.5.1.1.11 | OCTET STRING (SIZE (0..16)) | RC | |
column · OCTET STRING (SIZE (0..16)) · read-create · current The mask for the user defined field. The length of this object must be the same as that of extremeVlanProtocolUserFieldValue. | ||||
| TextremeVlanProtocolVlanTable | 1.3.6.1.4.1.1916.1.2.5.2 | NA | ||
table · not-accessible · current Table to apply one of the protocol definitions in extremeVlanProtocolTable to a given VLAN This applies to all ports that are untagged in this VLAN). A limited number of protocols may be applied simultaneously in one device (up to 8 in ExtremeWare). | ||||
| RextremeVlanProtocolVlanEntry | 1.3.6.1.4.1.1916.1.2.5.2.1 | NA | ||
row · not-accessible · current A mapping of untagged packets of one protocol onto a particular VLAN. | ||||
| CextremeVlanProtocolVlanIfIndex | 1.3.6.1.4.1.1916.1.2.5.2.1.1 | Integer32 | RC | |
column · Integer32 · read-create · current The index value of this row and the vlan's ifIndex in the ifTable. The NMS obtains the index value for this row by reading the extremeNextAvailableVirtIfIndex object. | ||||
| CextremeVlanProtocolVlanProtocolIndex | 1.3.6.1.4.1.1916.1.2.5.2.1.2 | Integer32 | RC | |
column · Integer32 · read-create · current An index representing a protocol grouping of protocol ID values. A limited number of protocol groupings may be defined (up to 7 in ExtremeWare). | ||||
| CextremeVlanProtocolVlanStatus | 1.3.6.1.4.1.1916.1.2.5.2.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current The row status variable, used according to row installation and removal conventions. | ||||
| TextremeVlanProtocolDefTable | 1.3.6.1.4.1.1916.1.2.5.3 | NA | deprecated | |
table · not-accessible · deprecated Table of defined combinations of protocols and DLLEncaps type. This table will typically contain some default entries for popular protocols chosen by ExtremeWare. | ||||
| RextremeVlanProtocolDefEntry | 1.3.6.1.4.1.1916.1.2.5.3.1 | NA | deprecated | |
row · not-accessible · deprecated One member representing combination of protocol and DLLEncaps Type. | ||||
| CextremeVlanProtocolDefName | 1.3.6.1.4.1.1916.1.2.5.3.1.1 | DisplayString (SIZE (1..32)) | NA | deprecated |
column · DisplayString (SIZE (1..32)) · not-accessible · deprecated A human-readable string representing this protocol. A ExtremeVlanProtocolEntry with extremeVlanProtocol2Name of ANY represents a match on all protocols: this entry may not be modified. | ||||
| CextremeVlanProtocolDefDllEncapsType | 1.3.6.1.4.1.1916.1.2.5.3.1.2 | INTEGER | NA | deprecated |
column · INTEGER · not-accessible · deprecated Represents the type of data-link encapsulation in which the protocol designated by extremeVlanProtocolDefName is carried. The value any(1) is used to indicate a wildcard and matches all encapsulations and protocol IDs that are not explicitly mentioned in this table. Entries of type any(1) may not be created. The value none(5) is used to indicate that no protocol IDs match this entry. A value of none(5) may not be set by a manager.
| ||||
| CextremeVlanProtocolDefValue | 1.3.6.1.4.1.1916.1.2.5.3.1.3 | INTEGER (0..65535) | NA | deprecated |
column · INTEGER (0..65535) · not-accessible · deprecated The protocol ID: for entries of type ethertype(2) or llcSnapEthertype(4) this represents a 16-bit protocol ID. For entries of type llc(3) it represents a concatenation of LLC DSAP+SSAP in network byte order. This value is not valid for extremeVlanProtocolDefDllEncapsType values of any(1) or none(5). | ||||
| CextremeVlanProtocolDefStatus | 1.3.6.1.4.1.1916.1.2.5.3.1.4 | RowStatus | RO | deprecated |
column · RowStatus · read-only · deprecated The row status variable, used according to row installation and removal conventions. | ||||
| TextremeVlanProtocolBindingTable | 1.3.6.1.4.1.1916.1.2.5.4 | NA | ||
table · not-accessible · current Table to apply one of the protocol definitions in extremeVlanProtocolDefTable to a given VLAN This applies to all ports that are untagged in this VLAN). A limited number of protocols may be applied simultaneously in one device (up to 8 in ExtremeWare). | ||||
| RextremeVlanProtocolBindingEntry | 1.3.6.1.4.1.1916.1.2.5.4.1 | NA | ||
row · not-accessible · current A mapping of untagged packets of one protocol onto a particular VLAN. | ||||
| CextremeVlanProtocolBindingIfIndex | 1.3.6.1.4.1.1916.1.2.5.4.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The index value of this row and the vlan's ifIndex in the ifTable. The NMS obtains the index value for this row by reading the extremeNextAvailableVirtIfIndex object. | ||||
| CextremeVlanProtocolBindingName | 1.3.6.1.4.1.1916.1.2.5.4.1.2 | DisplayString (SIZE (0..31)) | RC | |
column · DisplayString (SIZE (0..31)) · read-create · current A human-readable string representing this protocol. A ExtremeVlanProtocolBindingEntry with extremeVlanProtocolBindingName of ANY represents a match on all protocols: this entry may not be modified. | ||||
| CextremeVlanProtocolBindingStatus | 1.3.6.1.4.1.1916.1.2.5.4.1.3 | RowStatus | RO | |
column · RowStatus · read-only · current The row status variable, used according to row installation and removal conventions. | ||||
| NextremeVlanOpaqueGroup | 1.3.6.1.4.1.1916.1.2.6 | |||
| TextremeVlanOpaqueTable | 1.3.6.1.4.1.1916.1.2.6.1 | NA | ||
table · not-accessible · current This table lists the ports associated with each VLAN interface. | ||||
| RextremeVlanOpaqueEntry | 1.3.6.1.4.1.1916.1.2.6.1.1 | NA | ||
row · not-accessible · current This represents the tagged and untagged ports on each slot per vlan. | ||||
| CextremeVlanOpaqueTaggedPorts | 1.3.6.1.4.1.1916.1.2.6.1.1.1 | PortList | RO | |
column · PortList · read-only · current Each bit in the octet string represents one port. A 1 means that the port is a tagged port in that vlan. The bit value for a port is 0 otherwise. | ||||
| CextremeVlanOpaqueUntaggedPorts | 1.3.6.1.4.1.1916.1.2.6.1.1.2 | PortList | RO | |
column · PortList · read-only · current Each bit in the octet string represents one port. A 1 means that the port is an untagged port in that vlan. The bit value for a port is 0 otherwise. | ||||
| CextremeVlanOpaqueTranslatedPorts | 1.3.6.1.4.1.1916.1.2.6.1.1.3 | PortList | RO | |
column · PortList · read-only · current Each bit in the octet string represents one port. A 1 means that the port is a translated port in that vlan. Translated ports are also tagged ports. The bit value for a port is 0 otherwise. | ||||
| TextremeVlanOpaqueControlTable | 1.3.6.1.4.1.1916.1.2.6.2 | NA | ||
table · not-accessible · current This table is used to configure the ports associated with each VLAN interface. The table is used to add/delete ports on a vlan. The table is transitional in nature and SNMP read operations must not be performed on it. Use extremeVlanOpaqueTable for reading the port membership association with vlans | ||||
| RextremeVlanOpaqueControlEntry | 1.3.6.1.4.1.1916.1.2.6.2.1 | NA | ||
row · not-accessible · current This represents a control table entry (command) to configure the tagged and untagged ports on each slot per vlan. The first index of the entry is the ifIndex of the VLAN and second index is the slot number of the ports. When adding untagged ports to a VLAN, those ports maybe not be untagged ports for another VLAN (assuming both VLANs use the ANY protocol filter). Such ports must first be deleted from the other VLAN(s) or an error will occur. The operation will succeed or fail in its entirety, no partial results on some of the ports. | ||||
| CextremeVlanOpaqueControlPorts | 1.3.6.1.4.1.1916.1.2.6.2.1.1 | PortList | RC | |
column · PortList · read-create · current The octet string representing a list of ports in bitwise form. | ||||
| CextremeVlanOpaqueControlOperation | 1.3.6.1.4.1.1916.1.2.6.2.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current The operation code for this entry.
addTagged(1) = Ports referred to in the extremeVlanOpaqueControlPorts
variable are added as tagged ports to the VLAN indicated
by the index. The ports belong to the slot number as
indicated by the second index of the variable.
addUntagged(2) = Ports referred to in the extremeVlanOpaqueControlPorts
variable are added as tagged ports to the VLAN indicated
by the index. The ports belong to the slot number as
indicated by the second index of the variable.
delete(3) = Ports referred to in the extremeVlanOpaqueControlPorts
variable are removed from the VLAN indicated by the index.
The ports belong to the slot number as indicated by the
second index of the variable.
addTranslated(4) = Ports referred to in the extremeVlanOpaqueControlPorts
variable are added as tagged translated ports to the
VLAN indicated by the index. The ports belong to the
slot number as indicated by the second index of the
variable.
| ||||
| CextremeVlanOpaqueControlStatus | 1.3.6.1.4.1.1916.1.2.6.2.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this entry as per standard RowStatus conventions. Note however, that only the CreateAndGo state is supported. | ||||
| NextremeVlanStackGroup | 1.3.6.1.4.1.1916.1.2.7 | |||
| TextremeVlanStackTable | 1.3.6.1.4.1.1916.1.2.7.1 | NA | ||
table · not-accessible · current Represents those components of the ifStackTable that do not contain a Physical interface. | ||||
| RextremeVlanStackEntry | 1.3.6.1.4.1.1916.1.2.7.1.1 | NA | ||
row · not-accessible · current Each entry in this read-only table defines which interfaces are on top of which one. All information in the table is also contained in ifStackTable. The Physical interfaces in the ifStackTable are not represented here. | ||||
| CextremeVlanStackHigherLayer | 1.3.6.1.4.1.1916.1.2.7.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The higher layer in the logical vlan hierarchy. | ||||
| CextremeVlanStackLowerLayer | 1.3.6.1.4.1.1916.1.2.7.1.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The lower layer in the logical vlan hierarchy. | ||||
| NextremeVlanStatsGroup | 1.3.6.1.4.1.1916.1.2.8 | |||
| TextremeVlanL2StatsTable | 1.3.6.1.4.1.1916.1.2.8.1 | NA | ||
table · not-accessible · current This tables contains per-VLAN layer 2 statistics information. | ||||
| RextremeVlanL2StatsEntry | 1.3.6.1.4.1.1916.1.2.8.1.1 | NA | ||
row · not-accessible · current
| ||||
| CextremeVlanL2StatsIfDescr | 1.3.6.1.4.1.1916.1.2.8.1.1.1 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current This is a description(name) of the VLAN. | ||||
| CextremeVlanL2StatsPktsToCpu | 1.3.6.1.4.1.1916.1.2.8.1.1.2 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of packets of this VLAN sent to the CPU. | ||||
| CextremeVlanL2StatsPktsLearnt | 1.3.6.1.4.1.1916.1.2.8.1.1.3 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of packets learnt on this VLAN. | ||||
| CextremeVlanL2StatsIgmpCtrlPktsSnooped | 1.3.6.1.4.1.1916.1.2.8.1.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of IGMP control packets snooped on this VLAN. | ||||
| CextremeVlanL2StatsIgmpDataPktsSwitched | 1.3.6.1.4.1.1916.1.2.8.1.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of IGMP data packets switched on this VLAN. | ||||
| TextremePortVlanStatsTable | 1.3.6.1.4.1.1916.1.2.8.2 | NA | ||
table · not-accessible · current Vlan statistics per port. | ||||
| RextremePortVlanStatsEntry | 1.3.6.1.4.1.1916.1.2.8.2.1 | NA | ||
row · not-accessible · current Vlan port statistics Entry. | ||||
| CextremeStatsPortIfIndex | 1.3.6.1.4.1.1916.1.2.8.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of this table. | ||||
| CextremeStatsVlanNameIndex | 1.3.6.1.4.1.1916.1.2.8.2.1.2 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current The index of this table. | ||||
| CextremePortVlanStatsCntrType | 1.3.6.1.4.1.1916.1.2.8.2.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The flag to decide what fields to display, basic or extended. Currently, it is read-only and will reflect whatever has been set for the switch through the cli. | ||||
| CextremePortVlanUnicastReceivedPacketsCounter | 1.3.6.1.4.1.1916.1.2.8.2.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Unicast packets received by a port for a particular VLAN. | ||||
| CextremePortVlanMulticastReceivedPacketsCounter | 1.3.6.1.4.1.1916.1.2.8.2.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Multicast packets received by a port for a particular VLAN. | ||||
| CextremePortVlanBroadcastReceivedPacketsCounter | 1.3.6.1.4.1.1916.1.2.8.2.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Broadcast packets received by a port for a particular VLAN. | ||||
| CextremePortVlanTotalReceivedBytesCounter | 1.3.6.1.4.1.1916.1.2.8.2.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of bytes received by a port for a particular VLAN. | ||||
| CextremePortVlanTotalReceivedFramesCounter | 1.3.6.1.4.1.1916.1.2.8.2.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of frames received by a port for a particular VLAN. | ||||
| CextremePortVlanUnicastTransmittedPacketsCounter | 1.3.6.1.4.1.1916.1.2.8.2.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Unicast packets transmitted by a port for a particular VLAN. | ||||
| CextremePortVlanMulticastTransmittedPacketsCounter | 1.3.6.1.4.1.1916.1.2.8.2.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Multicast packets transmitted by a port for a particular VLAN. | ||||
| CextremePortVlanBroadcastTransmittedPacketsCounter | 1.3.6.1.4.1.1916.1.2.8.2.1.11 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Broadcast packets transmitted by a port for a particular VLAN. | ||||
| CextremePortVlanTotalTransmittedBytesCounter | 1.3.6.1.4.1.1916.1.2.8.2.1.12 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of bytes transmitted by a port for a particular VLAN. | ||||
| CextremePortVlanTotalTransmittedFramesCounter | 1.3.6.1.4.1.1916.1.2.8.2.1.13 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of frames transmitted by a port for a particular VLAN. | ||||
| CextremePortConfigureVlanStatus | 1.3.6.1.4.1.1916.1.2.8.2.1.14 | RowStatus | RC | |
column · RowStatus · read-create · current The row status variable, used according to row installation and removal conventions. | ||||
| NextremeVlanAggregationGroup | 1.3.6.1.4.1.1916.1.2.9 | |||
| TextremeVlanAggregationTable | 1.3.6.1.4.1.1916.1.2.9.1 | NA | ||
table · not-accessible · current This table contains the VLAN aggregation information. | ||||
| RextremeVlanAggregationEntry | 1.3.6.1.4.1.1916.1.2.9.1.1 | NA | ||
row · not-accessible · current Information about the individual VLAN aggregation entry. | ||||
| CextremeVlanAggregationSuperVlanIfIndex | 1.3.6.1.4.1.1916.1.2.9.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The Super Vlan index for this entry. | ||||
| CextremeVlanAggregationSubVlanIfIndex | 1.3.6.1.4.1.1916.1.2.9.1.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The Sub Vlan index for this entry. | ||||
| CextremeVlanAggregationSubVlanStartIpNetAddress | 1.3.6.1.4.1.1916.1.2.9.1.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current This represents the start network address of the IP range. | ||||
| CextremeVlanAggregationSubVlanStartIpNetMask | 1.3.6.1.4.1.1916.1.2.9.1.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current This represents the start network address mask of the IP range | ||||
| CextremeVlanAggregationSubVlanEndIpNetAddress | 1.3.6.1.4.1.1916.1.2.9.1.1.5 | IpAddress | RC | |
column · IpAddress · read-create · current This represents the end network address of the IP range. | ||||
| CextremeVlanAggregationSubVlanEndIpNetMask | 1.3.6.1.4.1.1916.1.2.9.1.1.6 | IpAddress | RO | |
column · IpAddress · read-only · current This represents the end network address mask of the IP range. | ||||
| CextremeVlanAggregationStatus | 1.3.6.1.4.1.1916.1.2.9.1.1.7 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this entry. | ||||
| TextremeVlanAggregationConfigTable | 1.3.6.1.4.1.1916.1.2.9.2 | NA | ||
table · not-accessible · current This table contains the sub VLAN proxy setting information. | ||||
| RextremeVlanAggregationConfigEntry | 1.3.6.1.4.1.1916.1.2.9.2.1 | NA | ||
row · not-accessible · current Information about the individual VLAN aggregation entry. | ||||
| CextremeVlanAggregationConfigSuperVlanIfIndex | 1.3.6.1.4.1.1916.1.2.9.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The Super Vlan index for this entry. | ||||
| CextremeVlanAggregationConfigSubVlanProxyEnable | 1.3.6.1.4.1.1916.1.2.9.2.1.2 | TruthValue | RC | |
column · TruthValue · read-create · current The boolean flag that prevents normal communication between sub vlans. | ||||
| NextremeVlanTranslationGroup | 1.3.6.1.4.1.1916.1.2.10 | |||
| TextremeVlanTranslationTable | 1.3.6.1.4.1.1916.1.2.10.1 | NA | ||
table · not-accessible · current This table contains the VLAN translation information. | ||||
| RextremeVlanTranslationEntry | 1.3.6.1.4.1.1916.1.2.10.1.1 | NA | ||
row · not-accessible · current Information about the individual VLAN translation entry. | ||||
| CextremeVlanTranslationSuperVlanIfIndex | 1.3.6.1.4.1.1916.1.2.10.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The Super Vlan index for this entry. | ||||
| CextremeVlanTranslationMemberVlanIfIndex | 1.3.6.1.4.1.1916.1.2.10.1.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The member Vlan index for this entry. | ||||
| CextremeVlanTranslationStatus | 1.3.6.1.4.1.1916.1.2.10.1.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this entry. | ||||
| NextremePrivateVlan | 1.3.6.1.4.1.1916.1.2.11 | |||
| TextremePvlanTable | 1.3.6.1.4.1.1916.1.2.11.1 | NA | ||
table · not-accessible · current This table contains the Private VLAN information. | ||||
| RextremePvlanEntry | 1.3.6.1.4.1.1916.1.2.11.1.1 | NA | ||
row · not-accessible · current Information about the individual private VLAN entry.
| ||||
| CextremePvlanName | 1.3.6.1.4.1.1916.1.2.11.1.1.1 | DisplayString (SIZE (1..32)) | RC | |
column · DisplayString (SIZE (1..32)) · read-create · current PVLAN Name | ||||
| CextremePvlanVrName | 1.3.6.1.4.1.1916.1.2.11.1.1.2 | DisplayString (SIZE (1..32)) | RC | |
column · DisplayString (SIZE (1..32)) · read-create · current VR Name for which PVLAN belongs. | ||||
| CextremePvlanNetworkVlanIfIndex | 1.3.6.1.4.1.1916.1.2.11.1.1.3 | InterfaceIndexOrZero | RC | |
column · InterfaceIndexOrZero · read-create · current VLAN IfIndex of the PVLAN Network VLAN. | ||||
| CextremePvlanRowStatus | 1.3.6.1.4.1.1916.1.2.11.1.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current Supported actions taken on this row entry. active(1), createAndGo(4), destroy(6) | ||||
| TextremePvlanSubscriberTable | 1.3.6.1.4.1.1916.1.2.11.2 | NA | ||
table · not-accessible · current This table contains the Private VLAN Subscriber VLAN information. Subscriber VLANs carry user data traffic. This data traffic is then aggregated and forwarded out of a single Private VLAN Network VLAN. The Network VLAN may or may not translate the Subscriber VLAN traffic tags into a single tag depending on the Network VLAN configuration. Subscriber VLANs can be Isolated or Non-Isolated. Isolated Subscriber VLANs do not allow ports within the isolated Subscriber VLAN to communicate with each other. Communication is strictly with the Network VLAN ports. | ||||
| RextremePvlanSubscriberEntry | 1.3.6.1.4.1.1916.1.2.11.2.1 | NA | ||
row · not-accessible · current This represents information about the individual private VLAN Subscriber entry. | ||||
| CextremePvlanSubscriberVlanIfIndex | 1.3.6.1.4.1.1916.1.2.11.2.1.1 | InterfaceIndex | RC | |
column · InterfaceIndex · read-create · current VLAN IfIndex of Subscriber VLAN. Subscriber VLANs are user facing VLANs. There can be many Subscriber VLANs associated with a private VLAN. User traffic from Subscriber VLANs are aggregated and sent out the network ports of the Network VLAN. There can only be a single Network VLAN for each Private VLAN. | ||||
| CextremePvlanSubscriberType | 1.3.6.1.4.1.1916.1.2.11.2.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current Ports belonging to isolated Subscriber VLANs may not communicate with other ports on the VLAN. Those ports may only communicate with the network port. Ports belonging to non-isolated Subscriber VLANs behave like normal VLAN ports and can communicate with all other ports of the Subscriber in addition to the network port. This cannot be modified. To change this value, user must delete entry and re-create.
| ||||
| CextremePvlanSubscriberLoopBackPortIfIndex | 1.3.6.1.4.1.1916.1.2.11.2.1.3 | InterfaceIndexOrZero | RC | |
column · InterfaceIndexOrZero · read-create · current Loopback port for the Subscriber VLAN. Some Subscriber VLAN configurations that have overlapping ports (ports assigned to both Subscriber VLANS) must have a dedicated loopback ports configured. | ||||
| CextremePvlanSubscriberRowStatus | 1.3.6.1.4.1.1916.1.2.11.2.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current Supported actions taken on this row entry. active(1), createAndGo(4), destroy(6) | ||||