EXTREME-SYSTEM-MIB
Extreme NetworksExtreme System objects: objects common to all platforms
snmptranslate -m EXTREME-SYSTEM-MIB -Tpsnmpwalk -v2c -c <community> -m EXTREME-SYSTEM-MIB <host> 1.3.6.1.4.1.1916.1.1Imports
| EXTREME-BASE-MIB | PortList, extremeAgent |
|---|---|
| IF-MIB | ifDescr |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-MIB | sysDescr, sysUpTime |
| SNMPv2-SMI | Bits, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IextremeSystem | 1.3.6.1.4.1.1916.1.1 | ||||||||||||
identity Extreme System objects: objects common to all platforms | |||||||||||||
| NextremeSystemCommon | 1.3.6.1.4.1.1916.1.1.1 | ||||||||||||
| SextremeSaveConfiguration | 1.3.6.1.4.1.1916.1.1.1.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current When this object is set, the device will copy the contents of the configuration database to a buffer and save it to the persistent store specified by the value of the object. The save is performed asynchronously, and the snmp agent will continue to respond to only gets while the save is taking place. A network management application may use the extremeSaveStatus object to determine when the asynchronous save operation has completed and can respond to sets. When this object is set to value saveToFile(5), the file name should be indicated with the object extremeSaveConfigurationFileName. factoryDefault(4) is a read-only value for this object.
| |||||||||||||
| SextremeSaveStatus | 1.3.6.1.4.1.1916.1.1.1.4 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current This object will return the status of a save operation invoked by setting the extremeSaveConfiguration object. A network management application can read this object to determine that a save operation has completed.
| |||||||||||||
| SextremeCurrentConfigInUse | 1.3.6.1.4.1.1916.1.1.1.5 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Shows which NVRAM configuration store was used at last boot.
| |||||||||||||
| SextremeConfigToUseOnReboot | 1.3.6.1.4.1.1916.1.1.1.6 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Controls which NVRAM configuration store will be used on next reboot.
| |||||||||||||
| SextremeOverTemperatureAlarm | 1.3.6.1.4.1.1916.1.1.1.7 | TruthValue | RO | ||||||||||
scalar · TruthValue · read-only · current Alarm status of overtemperature sensor in device enclosure. | |||||||||||||
| SextremeCurrentTemperature | 1.3.6.1.4.1.1916.1.1.1.8 | INTEGER (0..110) | RO | 72 | |||||||||
scalar · INTEGER (0..110) · read-only · current Current temperature in degrees celcius measured inside device enclosure. Example values from LibreNMS test devices
| |||||||||||||
| TextremeFanStatusTable | 1.3.6.1.4.1.1916.1.1.1.9 | NA | |||||||||||
table · not-accessible · current Table of operational status of all internal cooling fans. | |||||||||||||
| RextremeFanStatusEntry | 1.3.6.1.4.1.1916.1.1.1.9.1 | NA | |||||||||||
| CextremeFanNumber | 1.3.6.1.4.1.1916.1.1.1.9.1.1 | Integer32 | RO | 1 | |||||||||
| CextremeFanOperational | 1.3.6.1.4.1.1916.1.1.1.9.1.2 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current Operational status of a cooling fan. | |||||||||||||
| CextremeFanEntPhysicalIndex | 1.3.6.1.4.1.1916.1.1.1.9.1.3 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The entity index for this fan entity in the entityPhysicalTable table of the entity MIB. | |||||||||||||
| CextremeFanSpeed | 1.3.6.1.4.1.1916.1.1.1.9.1.4 | Integer32 | RO | 6600 | |||||||||
| CextremeFanPresent | 1.3.6.1.4.1.1916.1.1.1.9.1.5 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current This object has a value 'true(1)' if the fan is present and a value 'false(2)' otherwise. | |||||||||||||
| CextremeFanFlowType | 1.3.6.1.4.1.1916.1.1.1.9.1.6 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Direction of the Fan Air Flow: -frontToBack(1) - Front to back flow. -backToFront(2) - Back to front flow. -unknown(3) - Flow can not be determined.
| |||||||||||||
| CextremeFanPositionSlotNum | 1.3.6.1.4.1.1916.1.1.1.9.1.7 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The 1-based slot number. | |||||||||||||
| CextremeFanPositionTrayNum | 1.3.6.1.4.1.1916.1.1.1.9.1.8 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The 1-based fan tray number in a slot. | |||||||||||||
| CextremeFanPositionFanNum | 1.3.6.1.4.1.1916.1.1.1.9.1.9 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The 1-based fan number in a fan tray. | |||||||||||||
| SextremePrimaryPowerOperational | 1.3.6.1.4.1.1916.1.1.1.10 | TruthValue | RO | 1 | |||||||||
scalar · TruthValue · read-only · current Operational status of internal power supply of a device. Example values from LibreNMS test devices
| |||||||||||||
| SextremeRedundantPowerStatus | 1.3.6.1.4.1.1916.1.1.1.11 | INTEGER | RO | presentOK(2) | |||||||||
scalar · INTEGER · read-only · current Operational status of an external redundant power supply to a device.
Example values from LibreNMS test devices
| |||||||||||||
| SextremeRedundantPowerAlarm | 1.3.6.1.4.1.1916.1.1.1.12 | TruthValue | RO | 2 | |||||||||
scalar · TruthValue · read-only · current Alarm state of an external redundant power supply to a device. Alarm state indicates either fan failure or overtemperature condition. Example values from LibreNMS test devices
| |||||||||||||
| SextremePrimarySoftwareRev | 1.3.6.1.4.1.1916.1.1.1.13 | DisplayString (SIZE (0..80)) | RO | 22.3.0.39 | |||||||||
scalar · DisplayString (SIZE (0..80)) · read-only · current The software revision of the primary image stored in this device. This string will have a zero length if the revision is unknown, invalid or not present. This will also be reported in RMON2 probeSoftwareRev if this is the software image currently running in the device. Example values from LibreNMS test devices
| |||||||||||||
| SextremeSecondarySoftwareRev | 1.3.6.1.4.1.1916.1.1.1.14 | DisplayString (SIZE (0..80)) | RO | 22.6.1.4 | |||||||||
scalar · DisplayString (SIZE (0..80)) · read-only · current The software revision of the secondary image stored in this device. This string will have a zero length if the revision is unknown, invalid or not present. This will also be reported in RMON2 probeSoftwareRev if this is the software image currently running in the device. Example values from LibreNMS test devices
| |||||||||||||
| SextremeImageToUseOnReboot | 1.3.6.1.4.1.1916.1.1.1.15 | INTEGER | RW | secondary(2) | |||||||||
scalar · INTEGER · read-write · current Controls which image will be used on next reboot.
Example values from LibreNMS test devices
| |||||||||||||
| SextremeSystemID | 1.3.6.1.4.1.1916.1.1.1.16 | DisplayString (SIZE (0..126)) | RO | 800770-00-06 1828N-40403 | |||||||||
scalar · DisplayString (SIZE (0..126)) · read-only · current This represents the System ID of the Summit Switch. Example values from LibreNMS test devices
| |||||||||||||
| SextremeSystemBoardID | 1.3.6.1.4.1.1916.1.1.1.17 | DisplayString (SIZE (0..126)) | RO | | |||||||||
scalar · DisplayString (SIZE (0..126)) · read-only · current This represents the Board ID of the Summit Switch. Example values from LibreNMS test devices
| |||||||||||||
| SextremeSystemLeftBoardID | 1.3.6.1.4.1.1916.1.1.1.18 | DisplayString (SIZE (0..126)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..126)) · read-only · current This represents the Left Board ID of the Summit Switch. | |||||||||||||
| SextremeSystemRightBoardID | 1.3.6.1.4.1.1916.1.1.1.19 | DisplayString (SIZE (0..126)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..126)) · read-only · current This represents the Right Board ID of the Summit Switch. | |||||||||||||
| SextremeInputPowerVoltage | 1.3.6.1.4.1.1916.1.1.1.20 | PowerValue | RO | ||||||||||
scalar · PowerValue · read-only · current The input power voltage at which the system is currently operating. | |||||||||||||
| SextremePowerStatus | 1.3.6.1.4.1.1916.1.1.1.21 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Operational status of the power supply to a device.
| |||||||||||||
| SextremePowerAlarm | 1.3.6.1.4.1.1916.1.1.1.22 | TruthValue | RO | ||||||||||
scalar · TruthValue · read-only · current Alarm state of the power supply to a device. Alarm state indicates either fan failure or overtemperature condition. | |||||||||||||
| SextremeRmonEnable | 1.3.6.1.4.1.1916.1.1.1.23 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current Setting this to true will cause the agent to start collecting RMON statistics. | |||||||||||||
| SextremeBootROMVersion | 1.3.6.1.4.1.1916.1.1.1.25 | DisplayString (SIZE (0..15)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..15)) · read-only · current The software revision of the bootrom on the device. This string will have a zero length if the revision is unknown or invalid. | |||||||||||||
| SextremeDot1dTpFdbTableEnable | 1.3.6.1.4.1.1916.1.1.1.26 | TruthValue | RW | obsolete | |||||||||
scalar · TruthValue · read-write · obsolete Setting this to true will cause GetNext operations on the dot1dTpFdbTable to be allowed. Note that Get operations are always allowed. | |||||||||||||
| TextremePowerSupplyTable | 1.3.6.1.4.1.1916.1.1.1.27 | NA | |||||||||||
table · not-accessible · current Table of status of all power supplies in the system. | |||||||||||||
| RextremePowerSupplyEntry | 1.3.6.1.4.1.1916.1.1.1.27.1 | NA | |||||||||||
row · not-accessible · current An entry indicating the status of a specific power supply. | |||||||||||||
| CextremePowerSupplyNumber | 1.3.6.1.4.1.1916.1.1.1.27.1.1 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Power supply number. | |||||||||||||
| CextremePowerSupplyStatus | 1.3.6.1.4.1.1916.1.1.1.27.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Status of the power supply.
| |||||||||||||
| CextremePowerSupplyInputVoltage | 1.3.6.1.4.1.1916.1.1.1.27.1.3 | PowerValue | RO | ||||||||||
column · PowerValue · read-only · current Input voltage of the power supply | |||||||||||||
| CextremePowerSupplySerialNumber | 1.3.6.1.4.1.1916.1.1.1.27.1.4 | DisplayString (SIZE (0..126)) | RO | ||||||||||
column · DisplayString (SIZE (0..126)) · read-only · current The serial number of the power supply unit. | |||||||||||||
| CextremePowerSupplyEntPhysicalIndex | 1.3.6.1.4.1.1916.1.1.1.27.1.5 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The entity index for this psu entity in the entityPhysicalTable of the entity MIB. | |||||||||||||
| CextremePowerSupplyFan1Speed | 1.3.6.1.4.1.1916.1.1.1.27.1.6 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The speed (RPM) of Fan-1 in the power supply unit.
| |||||||||||||
| CextremePowerSupplyFan2Speed | 1.3.6.1.4.1.1916.1.1.1.27.1.7 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The speed (RPM) of Fan-2 in the power supply unit.
| |||||||||||||
| CextremePowerSupplySource | 1.3.6.1.4.1.1916.1.1.1.27.1.8 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The power supply unit input source.
| |||||||||||||
| CextremePowerSupplyInputPowerUsage | 1.3.6.1.4.1.1916.1.1.1.27.1.9 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Input power usage for the given psu slot. The value 0 in this field indicate the power usage is not supported or read failure. | |||||||||||||
| CextremePowerMonSupplyNumOutput | 1.3.6.1.4.1.1916.1.1.1.27.1.10 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Number of output sensors in the power supply unit | |||||||||||||
| CextremePowerSupplyInputPowerUsageUnitMultiplier | 1.3.6.1.4.1.1916.1.1.1.27.1.11 | UnitMultiplier | RO | ||||||||||
column · UnitMultiplier · read-only · current The magnitude of watts for the usage value in extremePowerSupplyInputPowerUsage. | |||||||||||||
| CextremePowerSupplyWattage | 1.3.6.1.4.1.1916.1.1.1.27.1.12 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Total power available in watts from the power supply unit | |||||||||||||
| CextremePowerSupplyFanFlowType | 1.3.6.1.4.1.1916.1.1.1.27.1.13 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Direction of power supply Fan Air Flow. -frontToBack(1) - Front to back flow. -backToFront(2) - Back to front flow. -unknown(3) - Flow can not be determined.
| |||||||||||||
| SextremeCpuAggregateUtilization | 1.3.6.1.4.1.1916.1.1.1.28 | Integer32 | RO | deprecated | |||||||||
scalar · Integer32 · read-only · deprecated The aggregate CPU utilization since the time the start started executing. | |||||||||||||
| TextremeCpuTask2Table | 1.3.6.1.4.1.1916.1.1.1.29 | NA | deprecated | ||||||||||
table · not-accessible · deprecated Table of CPU tasks that are active. | |||||||||||||
| RextremeCpuTask2Entry | 1.3.6.1.4.1.1916.1.1.1.29.1 | NA | deprecated | ||||||||||
row · not-accessible · deprecated An entry in table of describes a single task. | |||||||||||||
| CextremeCpuTask2CpuId | 1.3.6.1.4.1.1916.1.1.1.29.1.1 | Unsigned32 | NA | deprecated | |||||||||
column · Unsigned32 · not-accessible · deprecated CPU on which this task last executed or is executing. The primary CPU has a value of 1. | |||||||||||||
| CextremeCpuTask2Name | 1.3.6.1.4.1.1916.1.1.1.29.1.2 | DisplayString (SIZE (0..31)) | NA | deprecated | |||||||||
column · DisplayString (SIZE (0..31)) · not-accessible · deprecated Name associated with the reported task id. | |||||||||||||
| CextremeCpuTask2Id | 1.3.6.1.4.1.1916.1.1.1.29.1.3 | Unsigned32 | RO | deprecated | |||||||||
column · Unsigned32 · read-only · deprecated Task identifier assigned by the operating system when this task is spawned. | |||||||||||||
| CextremeCpuTask2Pc | 1.3.6.1.4.1.1916.1.1.1.29.1.4 | Unsigned32 | RO | deprecated | |||||||||
column · Unsigned32 · read-only · deprecated The value of the program counter for this task.
It indicates the address of the next instruction
that would be executed once the operating system
resumes this task. | |||||||||||||
| CextremeCpuTask2Status | 1.3.6.1.4.1.1916.1.1.1.29.1.5 | DisplayString | RO | deprecated | |||||||||
column · DisplayString · read-only · deprecated The current status of the task as reported by the operating system. | |||||||||||||
| CextremeCpuTask2Utilization | 1.3.6.1.4.1.1916.1.1.1.29.1.6 | Unsigned32 | RO | deprecated | |||||||||
column · Unsigned32 · read-only · deprecated The current CPU utilization by this task. This is the utilization when the task last executed. | |||||||||||||
| CextremeCpuTask2MaxUtilization | 1.3.6.1.4.1.1916.1.1.1.29.1.7 | Unsigned32 | RW | deprecated | |||||||||
column · Unsigned32 · read-write · deprecated The maximum CPU utilization by this task since the time the start started executing. This value may be cleared. | |||||||||||||
| SextremeAuthFailSrcAddr | 1.3.6.1.4.1.1916.1.1.1.30 | IpAddress | AN | deprecated | |||||||||
scalar · IpAddress · accessible-for-notify · deprecated The IP address of the originator of the bad SNMP request that caused the generation of an authentication failure trap. | |||||||||||||
| SextremeCpuTransmitPriority | 1.3.6.1.4.1.1916.1.1.1.31 | INTEGER | RW | deprecated | |||||||||
scalar · INTEGER · read-write · deprecated The CPU transmit priority.
| |||||||||||||
| SextremeImageBooted | 1.3.6.1.4.1.1916.1.1.1.32 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The image with which the switch was last booted, using which it is currently running.
| |||||||||||||
| SextremeMsmFailoverCause | 1.3.6.1.4.1.1916.1.1.1.33 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The cause of the last MSM failover. never(1) means an MSM Failover has not occurred since the last reboot. admin(2) means the failover was initiated by the user. exception(3) means the former master MSM encountered a software exception condition. removal(4) means the master MSM was physically removed from the chassis. hwFailure(5) means a diagnostic failure was detected in the master MSM. watchdog(6) means that the master MSM hardware watchdog timer expired. keepalive(7) means the master MSM failed to respond to slave keepalive requests. The MSM failover will have been hitless only in the admin(2) and exception(3) cases
| |||||||||||||
| TextremeImageTable | 1.3.6.1.4.1.1916.1.1.1.34 | NA | |||||||||||
table · not-accessible · current A table containing information about each software image. | |||||||||||||
| RextremeImageEntry | 1.3.6.1.4.1.1916.1.1.1.34.1 | NA | |||||||||||
row · not-accessible · current A table entry containing information about each software image.
| |||||||||||||
| CextremeImageNumber | 1.3.6.1.4.1.1916.1.1.1.34.1.1 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current A unique integer identifying the particular software image.
| |||||||||||||
| CextremeMajorVersion | 1.3.6.1.4.1.1916.1.1.1.34.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The ExtremeWare Release Major Version. | |||||||||||||
| CextremeSubMajorVersion | 1.3.6.1.4.1.1916.1.1.1.34.1.3 | Integer32 | RO | deprecated | |||||||||
column · Integer32 · read-only · deprecated The ExtremeWare Release Sub-major Version. | |||||||||||||
| CextremeMinorVersion | 1.3.6.1.4.1.1916.1.1.1.34.1.4 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The ExtremeWare Release Minor Version. | |||||||||||||
| CextremeBuildNumber | 1.3.6.1.4.1.1916.1.1.1.34.1.5 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The ExtremeWare Build Number. | |||||||||||||
| CextremeTechnologyReleaseNumber | 1.3.6.1.4.1.1916.1.1.1.34.1.6 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The Technology Release version. This value is zero for all but TR releases. | |||||||||||||
| CextremeSustainingReleaseNumber | 1.3.6.1.4.1.1916.1.1.1.34.1.7 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The Sustaining Release number for the ExtremeWare version. | |||||||||||||
| CextremeBranchRevisionNumber | 1.3.6.1.4.1.1916.1.1.1.34.1.8 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The incremental build on specified branch. | |||||||||||||
| CextremeImageType | 1.3.6.1.4.1.1916.1.1.1.34.1.9 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The branch type from which the image was built.
| |||||||||||||
| CextremeImageDescription | 1.3.6.1.4.1.1916.1.1.1.34.1.10 | DisplayString (SIZE (0..255)) | RO | ||||||||||
column · DisplayString (SIZE (0..255)) · read-only · current A unique string that can be used to identify the specific patch, technology, or development branch release. | |||||||||||||
| CextremeImageSecurity | 1.3.6.1.4.1.1916.1.1.1.34.1.11 | INTEGER | RO | deprecated | |||||||||
column · INTEGER · read-only · deprecated Indicates whether image was built with ssh. This object is deprecated, the ssh capability can be obtained from the extremeImageSshCapability of the ImageFeatureTable
| |||||||||||||
| CextremePatchVersion | 1.3.6.1.4.1.1916.1.1.1.34.1.12 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The ExtremeWare Release Patch Version. | |||||||||||||
| TextremeImageFeatureTable | 1.3.6.1.4.1.1916.1.1.1.35 | NA | |||||||||||
table · not-accessible · current A table containing information about the software features. | |||||||||||||
| RextremeImageFeatureEntry | 1.3.6.1.4.1.1916.1.1.1.35.1 | NA | |||||||||||
row · not-accessible · current A table entry containing information about software features. | |||||||||||||
| CextremeImageFeatureNumber | 1.3.6.1.4.1.1916.1.1.1.35.1.1 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current A unique integer identifying the particular software image.
| |||||||||||||
| CextremeImageSshCapability | 1.3.6.1.4.1.1916.1.1.1.35.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Indicates whether image has ssh capability.
| |||||||||||||
| CextremeImageUAACapability | 1.3.6.1.4.1.1916.1.1.1.35.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Indicates whether image has Wireless(UAA) components.
| |||||||||||||
| SextremeSystemPowerState | 1.3.6.1.4.1.1916.1.1.1.36 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The current state of power available.
| |||||||||||||
| SextremeBootTime | 1.3.6.1.4.1.1916.1.1.1.37 | Counter64 | RO | ||||||||||
scalar · Counter64 · read-only · current The boot time expressed in standard time_t value. When interpreted as an absolute time value, it represents the number of seconds elapsed since 00:00:00 on January 1, 1970, Coordinated Universal Time (UTC) | |||||||||||||
| TextremePowerSupplyOutputPowerTable | 1.3.6.1.4.1.1916.1.1.1.38 | NA | |||||||||||
table · not-accessible · current The output power supply table per power supply unit. | |||||||||||||
| RextremePowerSupplyOutputPowerEntry | 1.3.6.1.4.1.1916.1.1.1.38.1 | NA | |||||||||||
row · not-accessible · current An entry in the power supply output table. | |||||||||||||
| CextremePowerSupplyIndex | 1.3.6.1.4.1.1916.1.1.1.38.1.1 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Power supply unit slot index | |||||||||||||
| CextremePowerSupplyOutputSensorIdx | 1.3.6.1.4.1.1916.1.1.1.38.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Power supply Sensor Index | |||||||||||||
| CextremePowerSupplyOutputVoltage | 1.3.6.1.4.1.1916.1.1.1.38.1.3 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Output voltage per sensor for the current psu slot no. 0 in this field tells the psu doesnt support output voltage reading or output voltage read error. | |||||||||||||
| CextremePowerSupplyOutputCurrent | 1.3.6.1.4.1.1916.1.1.1.38.1.4 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Output current per sensor for the current psu slot no. 0 in this field tells the psu doesnt support output current reading or output current read error. | |||||||||||||
| CextremePowerSupplyOutputUnitMultiplier | 1.3.6.1.4.1.1916.1.1.1.38.1.5 | UnitMultiplier | RO | ||||||||||
column · UnitMultiplier · read-only · current The magnitude of volts and amps for the usage value in extremePowerSupplyOutputVoltage and extremePowerSupplyOutputCurrent. | |||||||||||||
| TextremePowerSupplyUsageTable | 1.3.6.1.4.1.1916.1.1.1.39 | NA | |||||||||||
table · not-accessible · current The power supply usage on each slot. | |||||||||||||
| RextremePowerSupplyUsageEntry | 1.3.6.1.4.1.1916.1.1.1.39.1 | NA | |||||||||||
| CextremeSlotIndex | 1.3.6.1.4.1.1916.1.1.1.39.1.1 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Slot number in the chassis/stack based system. | |||||||||||||
| CextremePowerSupplyUsageValue | 1.3.6.1.4.1.1916.1.1.1.39.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Power Usage of the particular slot in the chassis or stack.The power usage is measured in milli-watts. | |||||||||||||
| CextremePowerSupplyUnitMultiplier | 1.3.6.1.4.1.1916.1.1.1.39.1.3 | UnitMultiplier | RO | ||||||||||
column · UnitMultiplier · read-only · current The magnitude of watts for the usage value in extremePowerSupplyUsageValue. | |||||||||||||
| NextremeSystemPowerUsage | 1.3.6.1.4.1.1916.1.1.1.40 | ||||||||||||
| SextremeSystemPowerUsageValue | 1.3.6.1.4.1.1916.1.1.1.40.1 | Integer32 | RO | 131120 | |||||||||
scalar · Integer32 · read-only · current The current power usage of the system.In stack mode this variables tells total power usage of the entire system. Example values from LibreNMS test devices
| |||||||||||||
| SextremeSystemPowerUsageUnitMultiplier | 1.3.6.1.4.1.1916.1.1.1.40.2 | UnitMultiplier | RO | ||||||||||
scalar · UnitMultiplier · read-only · current The magnitude of watts for the usage value in extremeSystemPowerUsageValue. | |||||||||||||
| TextremeSystemPowerMonitorTable | 1.3.6.1.4.1.1916.1.1.1.41 | NA | |||||||||||
table · not-accessible · current The output power supply table per power supply unit. | |||||||||||||
| RextremeSystemPowerMonitorEntry | 1.3.6.1.4.1.1916.1.1.1.41.1 | NA | |||||||||||
row · not-accessible · current An entry in the power supply output table. | |||||||||||||
| CextremeSystemPowerMonitorIndex1 | 1.3.6.1.4.1.1916.1.1.1.41.1.1 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Reserved can be used for future expansion. currently set to zero. | |||||||||||||
| CextremeSystemPowerMonitorPollInterval | 1.3.6.1.4.1.1916.1.1.1.41.1.2 | INTEGER (0..300) | RW | ||||||||||
column · INTEGER (0..300) · read-write · current Configure how often input power is measured. it is configured in seconds. default value is 60 seconds. if 0 is configured then the input power measurement is disabled | |||||||||||||
| CextremeSystemPowerMonitorReportChanges | 1.3.6.1.4.1.1916.1.1.1.41.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current configure report-changes has none or log or trap or log-and-trap, by default none is configured
| |||||||||||||
| CextremeSystemPowerMonitorChangeThreshold | 1.3.6.1.4.1.1916.1.1.1.41.1.4 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current configure input power change-threshold to initiate report-changes action. By default 2 watts is configured, this field is configured in watts. | |||||||||||||
| TextremeRebootTable | 1.3.6.1.4.1.1916.1.1.1.42 | NA | |||||||||||
table · not-accessible · current This group of objects use to initiate a device reboot or contain details of the last reboot operation of the switch modules or nodes. | |||||||||||||
| RrebootTimeEntry | 1.3.6.1.4.1.1916.1.1.1.42.1 | NA | |||||||||||
row · not-accessible · current This group of objects use to initiate a device reboot or contain details of the last reboot operation of the switch modules or nodes.
| |||||||||||||
| CextremeRebootSlotId | 1.3.6.1.4.1.1916.1.1.1.42.1.1 | INTEGER (0..65535) | RO | ||||||||||
column · INTEGER (0..65535) · read-only · current Specifies the MSM/MM module number of a switch or the slot number currently being used by the active stack node. | |||||||||||||
| CextremeRebootNodeAddress | 1.3.6.1.4.1.1916.1.1.1.42.1.2 | MacAddress | RW | ||||||||||
column · MacAddress · read-write · current Specifies the MAC address of the SummitStack node to be rebooted. NOTE: This object is valid only for Summit X250e and X450 series switches, and SummitStack. | |||||||||||||
| CextremeRebootModuleSlotId | 1.3.6.1.4.1.1916.1.1.1.42.1.3 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Specifies A or B for an MSM/MM module. - A specifies the MSM/MM installed in slot A. - B specifies the MSM/MM installed in slot B. Note: The modules that can be rebooted are management switch fabric modules(MSM) and management modules(MM). This object is valid only on modular switches. | |||||||||||||
| CextremeRebootSlotNumber | 1.3.6.1.4.1.1916.1.1.1.42.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Specifies the slot number currently being used by the active stack node that is to be rebooted. Note: This variable is available only on SummitStack. | |||||||||||||
| CextremeRebootAsStandby | 1.3.6.1.4.1.1916.1.1.1.42.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Specifies that all stack nodes that are to be rebooted are to operate as if configured to not be master-capable. NOTE: This object is valid only for Summit X250e and X450 series switches and SummitStack.
| |||||||||||||
| CextremeRebootStackTopology | 1.3.6.1.4.1.1916.1.1.1.42.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Specifies that the entire SummitStack is to be rebooted whether or not nodes are active. NOTE: This object is valid only for Summit X250e and X450 series switches and SummitStack.
| |||||||||||||
| CextremeRebootMonth | 1.3.6.1.4.1.1916.1.1.1.42.1.7 | INTEGER (1..12) | RW | ||||||||||
column · INTEGER (1..12) · read-write · current Specifies the month that the reboot is scheduled to start. | |||||||||||||
| CextremeRebootDay | 1.3.6.1.4.1.1916.1.1.1.42.1.8 | INTEGER (1..31) | RW | ||||||||||
column · INTEGER (1..31) · read-write · current Specifies the day that the reboot is scheduled to start. | |||||||||||||
| CextremeRebootYear | 1.3.6.1.4.1.1916.1.1.1.42.1.9 | INTEGER (2003..2036) | RW | ||||||||||
column · INTEGER (2003..2036) · read-write · current Specifies the year that the reboot is scheduled to start. | |||||||||||||
| CextremeRebootHour | 1.3.6.1.4.1.1916.1.1.1.42.1.10 | INTEGER (0..23) | RW | ||||||||||
column · INTEGER (0..23) · read-write · current Specifies the hour that the reboot is scheduled to start. | |||||||||||||
| CextremeRebootMinute | 1.3.6.1.4.1.1916.1.1.1.42.1.11 | INTEGER (0..59) | RW | ||||||||||
column · INTEGER (0..59) · read-write · current Specifies the number of minutes that the reboot is scheduled to start. | |||||||||||||
| CextremeRebootSeconds | 1.3.6.1.4.1.1916.1.1.1.42.1.12 | INTEGER (0..59) | RW | ||||||||||
column · INTEGER (0..59) · read-write · current Specifies the number of seconds that the reboot is scheduled to start. | |||||||||||||
| CextremeRebootCancel | 1.3.6.1.4.1.1916.1.1.1.42.1.13 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Cancels a previously scheduled reboot.
Note: This object, when enabled, override all objects associated with
a reboot request.
| |||||||||||||
| CextremeRebootImmediate | 1.3.6.1.4.1.1916.1.1.1.42.1.14 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Indicates that a reboot should be executed on the target device immediately.
| |||||||||||||
| CextremeRebootRowStatus | 1.3.6.1.4.1.1916.1.1.1.42.1.15 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The existence state of this reboot request. This object follows the row status behavior. | |||||||||||||
| TextremeDownloadImageTable | 1.3.6.1.4.1.1916.1.1.1.43 | NA | |||||||||||
table · not-accessible · current This group of objects contain details of the last or the current download image operation of the switch modules or nodes. | |||||||||||||
| RextremeDownloadImageEntry | 1.3.6.1.4.1.1916.1.1.1.43.1 | NA | |||||||||||
row · not-accessible · current This group of objects contain details of the last or the current download image operation of one of the switch modules or nodes. | |||||||||||||
| CextremeDownloadImageSlotId | 1.3.6.1.4.1.1916.1.1.1.43.1.1 | INTEGER (0..65535) | RC | ||||||||||
column · INTEGER (0..65535) · read-create · current Specifies the MSM/MM module number of a switch or the slot number currently being used by the active stack node. | |||||||||||||
| CextremeDownloadImageStatus | 1.3.6.1.4.1.1916.1.1.1.43.1.2 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Specifies the status of the current down load operation.
| |||||||||||||
| CextremeDownloadImageFilename | 1.3.6.1.4.1.1916.1.1.1.43.1.3 | DisplayString (SIZE (0..128)) | RC | ||||||||||
column · DisplayString (SIZE (0..128)) · read-create · current Specifies the file name of the downloading EXOS image. | |||||||||||||
| CextremeDownloadImagePartition | 1.3.6.1.4.1.1916.1.1.1.43.1.4 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Specifies which partition the image should be saved to primary or secondary. Select primary to save the image to the primary partition and secondary to save the image to the secondary partition. Note: Beginning with ExtremeXOS 12.1, an ExtremeXOS core image must be installed on the alternate (nonactive) partition. If a user tries to install on an active partition, the error message [Error: Image can only be installed to the non-active partition.] is displayed.
| |||||||||||||
| CextremeDownloadImageHostName | 1.3.6.1.4.1.1916.1.1.1.43.1.5 | DisplayString (SIZE (0..128)) | RC | ||||||||||
column · DisplayString (SIZE (0..128)) · read-create · current Specifies the hostname of the TFTP server from which the image should be obtained. | |||||||||||||
| CextremeDownloadImageIpaddress | 1.3.6.1.4.1.1916.1.1.1.43.1.6 | DisplayString (SIZE (0..128)) | RC | ||||||||||
column · DisplayString (SIZE (0..128)) · read-create · current Specifies the IP address of the TFTP server from which the image should be obtained. | |||||||||||||
| CextremeDownloadImageStartTime | 1.3.6.1.4.1.1916.1.1.1.43.1.7 | DisplayString (SIZE (0..31)) | RC | ||||||||||
column · DisplayString (SIZE (0..31)) · read-create · current Specifies the start time (date and time) of the current down load operation. | |||||||||||||
| CextremeDownloadImageMemorycard | 1.3.6.1.4.1.1916.1.1.1.43.1.8 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Specifies that the image should be obtained from a removable storage device, which can be a compact flash card or a USB 2.0 storage device.
| |||||||||||||
| CextremeDownloadImageInstall | 1.3.6.1.4.1.1916.1.1.1.43.1.9 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Specifies to start the install process after the successful download of the image.
| |||||||||||||
| CextremeDownloadSlotNumber | 1.3.6.1.4.1.1916.1.1.1.43.1.10 | INTEGER (1..8) | RC | ||||||||||
column · INTEGER (1..8) · read-create · current Specifies the slot number currently being used by the active stack node that is to be rebooted. Note: This variable is available only on stackable switches in a stack. | |||||||||||||
| CextremeDownloadModuleSlotId | 1.3.6.1.4.1.1916.1.1.1.43.1.11 | DisplayString | RC | ||||||||||
column · DisplayString · read-create · current Specifies A or B for an MSM/MM module. - A specifies the MSM/MM installed in slot A. - B specifies the MSM/MM installed in slot B. Note: The modules that can be rebooted are management switch fabric modules(MSM) and management modules(MM). This object is valid only on modular switches. | |||||||||||||
| CextremeDownloadRowStatus | 1.3.6.1.4.1.1916.1.1.1.43.1.12 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The existence state of this download image request. This object follows the row status behavior. | |||||||||||||
| CextremeDownloadBlockSize | 1.3.6.1.4.1.1916.1.1.1.43.1.13 | INTEGER (24..65000) | RC | ||||||||||
column · INTEGER (24..65000) · read-create · current Specifies the TFTP block-size to download image from the server | |||||||||||||
| TextremeInstallImageTable | 1.3.6.1.4.1.1916.1.1.1.44 | NA | |||||||||||
table · not-accessible · current This group of objects contain details of the last or the current install image operation of the switch modules or nodes. | |||||||||||||
| RextremeInstallImageEntry | 1.3.6.1.4.1.1916.1.1.1.44.1 | NA | |||||||||||
row · not-accessible · current This group of objects contain details of the last or the current install image operation of one of the switch modules or nodes. | |||||||||||||
| CextremeInstallImageSlotId | 1.3.6.1.4.1.1916.1.1.1.44.1.1 | INTEGER (0..65535) | RO | ||||||||||
column · INTEGER (0..65535) · read-only · current Specifies the MSM/MM module number of a switch or the slot number currently being used by the active stack node. | |||||||||||||
| CextremeInstallImageStatus | 1.3.6.1.4.1.1916.1.1.1.44.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Specifies the status of the current install image operation.
| |||||||||||||
| CextremeInstallImageFilename | 1.3.6.1.4.1.1916.1.1.1.44.1.3 | DisplayString (SIZE (0..128)) | RW | ||||||||||
column · DisplayString (SIZE (0..128)) · read-write · current Specifies the software image file. | |||||||||||||
| CextremeInstallImagePartition | 1.3.6.1.4.1.1916.1.1.1.44.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Specifies which partition the image should be saved to: primary or secondary. Select primary to save the image to the primary partition and secondary to save the image to the secondary partition. Note: Beginning with ExtremeXOS 12.1, an ExtremeXOS core image must be installed on the alternate (nonactive) partition. If a user tries to install on an active partition, the error message [Error: Image can only be installed to the non-active partition.] is displayed.
| |||||||||||||
| CextremeInstallImageStartTime | 1.3.6.1.4.1.1916.1.1.1.44.1.5 | DisplayString (SIZE (0..31)) | RO | ||||||||||
column · DisplayString (SIZE (0..31)) · read-only · current Specifies the start time of the current install operation. | |||||||||||||
| CextremeInstallImageReboot | 1.3.6.1.4.1.1916.1.1.1.44.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Specifies to reboot the switch after the image is installed.
| |||||||||||||
| CextremeInstallImageModuleSlotId | 1.3.6.1.4.1.1916.1.1.1.44.1.7 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Specifies A or B for an MSM/MM module. - A specifies the MSM/MM installed in slot A. - B specifies the MSM/MM installed in slot B. Note: The modules that can be rebooted are management switch fabric modules(MSM) and management modules(MM). This object is valid only on modular switches. | |||||||||||||
| CextremeInstallImageSlotNumber | 1.3.6.1.4.1.1916.1.1.1.44.1.8 | INTEGER (1..8) | RW | ||||||||||
column · INTEGER (1..8) · read-write · current Specifies the slot number currently being used by the active stack node that is to be rebooted. Note: This variable is available only on stackable switches in a stack. | |||||||||||||
| CextremeInstallImageRowStatus | 1.3.6.1.4.1.1916.1.1.1.44.1.9 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The existence state of this install image request. This object follows the row status behavior. | |||||||||||||
| NextremeLoadInstallTrap | 1.3.6.1.4.1.1916.1.1.1.45 | ||||||||||||
| NloadInstallControl | 1.3.6.1.4.1.1916.1.1.1.45.1 | ||||||||||||
| SdownloadImageTrapEnable | 1.3.6.1.4.1.1916.1.1.1.45.1.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This variable indicates whether the system produces the downloadImageTrap notification. A no(2) value will prevent notifications from being generated by this system.
| |||||||||||||
| SinstallImageTrapEnable | 1.3.6.1.4.1.1916.1.1.1.45.1.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This variable indicates whether the system produces the extremeInstallImageTrap notification. A no(2) value will prevent notifications from being generated by this system.
| |||||||||||||
| NloadInstallTraps | 1.3.6.1.4.1.1916.1.1.1.45.2 | ||||||||||||
| !downloadImageTrap | 1.3.6.1.4.1.1916.1.1.1.45.2.1 | ||||||||||||
notification · current This notification indicates the status of the last/current download operation. | |||||||||||||
| !installImageTrap | 1.3.6.1.4.1.1916.1.1.1.45.2.2 | ||||||||||||
notification · current This notification indicates the status of the last/current install operation. | |||||||||||||
| SextremeSaveConfigurationFileName | 1.3.6.1.4.1.1916.1.1.1.48 | DisplayString (SIZE (0..127)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..127)) · read-write · current This object is set, along the object extremSaveConfiguration option with value 5.This object indicates the file name to be used while saving the file. On reading it returns the current selected config. | |||||||||||||
| SextremeUseOnRebootFileName | 1.3.6.1.4.1.1916.1.1.1.49 | DisplayString (SIZE (0..127)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..127)) · read-write · current This object is set, along the object extremeConfigToUseOnReboot option with value 3.This object indicates the file name to be used while saving the file | |||||||||||||
| SextremeAuthFailSrcAddressType | 1.3.6.1.4.1.1916.1.1.1.50 | InetAddressType | AN | ||||||||||
scalar · InetAddressType · accessible-for-notify · current This object indicates the address type of the address contained in extremeAuthFailSrcAddr. | |||||||||||||
| SextremeAuthFailSrcAddress | 1.3.6.1.4.1.1916.1.1.1.51 | InetAddress | AN | ||||||||||
scalar · InetAddress · accessible-for-notify · current The address of the originator of the SNMP message that could not be authenticated. | |||||||||||||
| SextremeAuthFailSrcAddressVrName | 1.3.6.1.4.1.1916.1.1.1.52 | DisplayString (SIZE (1..32)) | AN | ||||||||||
scalar · DisplayString (SIZE (1..32)) · accessible-for-notify · current The VR from which the SNMP message that could not be authenticated was received from. | |||||||||||||
| NextremeAutoSave | 1.3.6.1.4.1.1916.1.1.1.53 | ||||||||||||
| SextremeAutoSaveConfigurationFileName | 1.3.6.1.4.1.1916.1.1.1.53.1 | DisplayString (SIZE (0..63)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..63)) · read-write · current This object indicates the file name to be used when configuration is automatically saved. On reading it returns the file name currently being used for automatic configuration saves. | |||||||||||||
| SextremeAutoSaveConfigurationEnabled | 1.3.6.1.4.1.1916.1.1.1.53.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable automatic configuration save. On reading it returns the current state of automatic configuration save.
| |||||||||||||
| SextremeAutoSaveConfigurationTimeInterval | 1.3.6.1.4.1.1916.1.1.1.53.3 | INTEGER (2..1440) | RW | ||||||||||
scalar · INTEGER (2..1440) · read-write · current Configure how often configuration is automatically saved. It is configured in minutes. | |||||||||||||
| SextremePortNotation | 1.3.6.1.4.1.1916.1.1.1.54 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Identifies the port notation and delimiter format used by ifName. It is used to disambiguate port specifications having a single delimiter. That is, to determine whether a slot number is included in a port specification or not. By default, a standalone setup does not specify a slot number, but port notation can be configured to include a slot number. If the notation is portColonChannel(1), no slot number is included and port specifications will be formatted as 'port:channel' or 'port'. For stacking or VPEX, a slot number is included and notation will be slotColonPortColonChannel(2) meaning that ports are formatted as 'slot:port:channel' or 'slot:port'. The values of portSlotChannel(3) and slotSlashPortSlashChannel(4) are not used currently but are reserved for future use. Note that a channel number will only (and always) be specified for channelized ports, regardless of port notation.
| |||||||||||||
| SextremeInletTemperature | 1.3.6.1.4.1.1916.1.1.1.55 | INTEGER (-24..100) | RO | ||||||||||
scalar · INTEGER (-24..100) · read-only · current Current temperature in degrees celcius measured outside device enclosure. | |||||||||||||
| SextremeInletTemperatureStatus | 1.3.6.1.4.1.1916.1.1.1.56 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Operational status of inlet temperature sensor.
| |||||||||||||
| NextremeChassisGroup | 1.3.6.1.4.1.1916.1.1.2 | ||||||||||||
| SextremeMasterMSMSlot | 1.3.6.1.4.1.1916.1.1.2.1 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The extremeSlotNumber of the master MSM module. | |||||||||||||
| TextremeSlotTable | 1.3.6.1.4.1.1916.1.1.2.2 | NA | |||||||||||
table · not-accessible · current A table containing information about each slot in the chassis. | |||||||||||||
| RextremeSlotEntry | 1.3.6.1.4.1.1916.1.1.2.2.1 | NA | |||||||||||
row · not-accessible · current A table entry containing information about the module in each slot of the chassis.
| |||||||||||||
| CextremeSlotNumber | 1.3.6.1.4.1.1916.1.1.2.2.1.1 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current A unique integer identifying the particular slot in the chassis. | |||||||||||||
| CextremeSlotName | 1.3.6.1.4.1.1916.1.1.2.2.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current A name identifying the particular slot in the chassis. | |||||||||||||
| CextremeSlotModuleConfiguredType | 1.3.6.1.4.1.1916.1.1.2.2.1.3 | SlotType | RW | ||||||||||
column · SlotType · read-write · current The configured module type for the given slot. At startup, the module-type is none(1). It is possible to configure the module-type even if there is no module in the slot. If the current module in the slot is different than the requested configured module-type, then the current configuration for the module is erased and the card will be restarted. The new configured module-type will be recorded. Since the configured module type is different than the actual module type, a moduleMismatch trap will be sent, and the extremeSlotModuleState for that module will show a mismatch(3). Setting this variable to none(1) will clear the previously assigned module-type of this slot, and all configuration information related to the slot will be erased. | |||||||||||||
| CextremeSlotModuleInsertedType | 1.3.6.1.4.1.1916.1.1.2.2.1.4 | SlotType | RO | ||||||||||
column · SlotType · read-only · current The module type inserted into the slot. It is possible to have a slot inserted into the slot even though extremeSlotConfiguredType is none(1). | |||||||||||||
| CextremeSlotModuleState | 1.3.6.1.4.1.1916.1.1.2.2.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The state of the module inserted in this slot.
| |||||||||||||
| CextremeSlotModuleSerialNumber | 1.3.6.1.4.1.1916.1.1.2.2.1.6 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The serial number of the module inserted in this slot. | |||||||||||||
| SextremeChassisPortsPerSlot | 1.3.6.1.4.1.1916.1.1.2.3 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The maximum number of ports that can be accomodated in a single slot. This number would change to accomodate blades with higher port density than current ones. | |||||||||||||
| NextremeSystemHealthCheck | 1.3.6.1.4.1.1916.1.1.3 | ||||||||||||
| SextremeHealthCheckErrorType | 1.3.6.1.4.1.1916.1.1.3.1 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current The error reported in the system health check trap
| |||||||||||||
| SextremeHealthCheckAction | 1.3.6.1.4.1.1916.1.1.3.2 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The action/alarm level configured for health check.
| |||||||||||||
| SextremeHealthCheckMaxRetries | 1.3.6.1.4.1.1916.1.1.3.3 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The maximum number of times a module restart will be attempted if it fails. If extremeHealthCheckAction is not autorecovery(5), then this value is zero. | |||||||||||||
| NextremeSystemThresholds | 1.3.6.1.4.1.1916.1.1.4 | ||||||||||||
| SextremeCpuUtilRisingThreshold | 1.3.6.1.4.1.1916.1.1.4.1 | INTEGER (0..100) | RW | deprecated | |||||||||
scalar · INTEGER (0..100) · read-write · deprecated Rising threshold for CPU Aggregation utilization trap | |||||||||||||
| SextremeCpuTaskUtilPair | 1.3.6.1.4.1.1916.1.1.4.2 | DisplayString | AN | deprecated | |||||||||
scalar · DisplayString · accessible-for-notify · deprecated TaskName/CPU_% Util pair reported in CPU Utilization trap | |||||||||||||
| NextremeSystemNotifications | 1.3.6.1.4.1.1916.1.1.6 | ||||||||||||
| NextremeSystemTrapsPrefix | 1.3.6.1.4.1.1916.1.1.6.0 | ||||||||||||
| !extremeSystemPowerStatus | 1.3.6.1.4.1.1916.1.1.6.0.1 | ||||||||||||
notification · current Change in status of System Power The trap will not be generated for discovering state.
| |||||||||||||
| !extremeGenericTrap | 1.3.6.1.4.1.1916.1.1.6.0.2 | ||||||||||||
| !extremePsuPowerStatus | 1.3.6.1.4.1.1916.1.1.6.0.3 | ||||||||||||
notification · current Trap to indicate change in status of Power Supply. | |||||||||||||
| !extremeSystemPowerUsageNotification | 1.3.6.1.4.1.1916.1.1.6.0.4 | ||||||||||||
notification · current Whenever the power usage is increased/decreased by the configured threshold value then the power usage trap is generated if the trap is enabled.. | |||||||||||||
| NextremeGenericTrapParams | 1.3.6.1.4.1.1916.1.1.7 | ||||||||||||
| Sseverity | 1.3.6.1.4.1.1916.1.1.7.1 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current The severity of the message being sent.
| |||||||||||||
| SeventName | 1.3.6.1.4.1.1916.1.1.7.2 | DisplayString (SIZE (0..40)) | AN | ||||||||||
scalar · DisplayString (SIZE (0..40)) · accessible-for-notify · current The event name being sent. | |||||||||||||
| Smessage | 1.3.6.1.4.1.1916.1.1.7.3 | DisplayString (SIZE (0..256)) | AN | ||||||||||
scalar · DisplayString (SIZE (0..256)) · accessible-for-notify · current The message being sent | |||||||||||||
Textual conventions
PowerValueINTEGERunknown(4)v110(1)v220(2)v48DC(3)The input power value of the switch.
SlotTypeINTEGERa12c(108)a3c(107)ags100-24t(575)ags150-24p(576)alpine3802(55)alpine3804(20)alpine3808(19)arm(103)bdx-mm1(549)bdxa-10g24x(551)bdxa-10g48t(584)bdxa-10g48x(550)bdxa-40g12x(553)bdxa-40g24x(552)bdxa-48t(630)bdxa-48x(631)bdxa-48x-0(632)bdxa-fm10t(555)bdxa-fm20t(554)bdxb-100g4x(604)bdxb-100g4x-xl(601)bdxb-40g12x-xl(600)ctr-8440(605)e4g-200(564)e4g-400(548)es412024mw4y(743)es412048mw4y(744)es422012p4x(733)es422012t4x(730)es422024p4x(734)es422024t4x(731)es422048p4x(735)es422048t4x(732)es42204mw20p4x(737)es42204mw8p4x(736)es42208mw40p4x(738)es42208x(739)es512024x4y(746)es512024xt4y(747)es512044x4y2c(745)es532016p2mxt2x(748)es532016p4xe(721)es532016p4xeDc(722)es532024p8xe(717)es532024t24s4xext(741)es532024t4xxt(740)es532024t8xe(718)es532048p8xe(719)es532048t8xe(720)es5420m24w24s4ye(749)es552024tacdc(706)es552024xacdc(709)es552048seacdc(708)es552048tacdc(707)es572024mw(723)es572024mxw(725)es572048mw(724)es572048mxw(726)es752048xt6c(728)es752048y8c(727)es752048ye8ce(742)es772032c(729)extreme5420f16mw32p4xeExos(698)extreme5420f16w32p4xeExos(696)extreme5420f24p4xeExos(692)extreme5420f24s4xeExos(699)extreme5420f24t4xeExos(694)extreme5420f48p4xeExos(695)extreme5420f48p4xlExos(700)extreme5420f48t4xeExos(697)extreme5420f8w16p4xeExos(693)extreme5420m16mw32p4yeExos(705)extreme5420m24t4yeExos(702)extreme5420m24w4yeExos(701)extreme5420m48t4yeExos(704)extreme5420m48w4yeExos(703)extreme552012mw36wExos(689)extreme552024tExos(685)extreme552024wExos(686)extreme552024xExos(691)extreme552048seExos(690)extreme552048tExos(687)extreme552048wExos(688)f32fi(31)f48ti(7)f96ti(29)fe32(2)fe32fx(5)fm16t3(38)fm24f(26)fm24sf(27)fm24te(28)fm32p(39)fm32t(21)fm8v(50)fortyG6xc(563)g12sxi(10)g12ti(11)g16x3(34)g20x(421)g24t3(35)g24x(418)g24xc(453)g48p(417)g48pe(435)g48t(416)g48ta(434)g48tc(450)g48tcPoE(459)g48te(433)g48te2(451)g48te2PoE(460)g48x(437)g48xc(452)g4x(3)g60t(400)g60x(401)g6x(4)g8ti(9)g8x(415)g8xc(457)g8xi(8)gm16t3(37)gm16x3(36)gm20t(427)gm20xt(428)gm20xtr(429)gm40xb(498)gm4sx(23)gm4t(24)gm4x(22)hm-2x24ga(535)mmadv(497)mmbase(496)mpls(104)msm(6)msm-48(447)msm-g8x(414)msm1(203)msm1xl(204)msm3(202)msm5(425)msm5r(426)msm64i(18)msm6r(432)msms48c(456)none(1)nwie450a(510)p12c(102)p3c(101)p48c(106)pxm(200)s300expansion(301)s300fixed(201)sma(105)tenG1xc(458)tenG2xc(562)tenG4xc(454)tenG8xc(455)tenGig(32)tenGigLR(33)teng2h(422)teng2x(420)teng4ca(448)teng4x(419)teng4xa(449)teng6x(402)v300-8p-2t-w(672)v300-8p-2x(673)v300-8t-2x(674)v300ht-8p-2x(675)v300ht-8t-2x(676)v400-24p-10GE2(651)v400-24t-10GE2(650)v400-48p-10GE4(653)v400-48t-10GE4(652)vm386EXOS(406)wdm4(30)wdm8(25)wm1t3(53)wm4e1(54)wm4t1(51)wm4t3(52)x150-24p(473)x150-24t(471)x150-24tdc(472)x150-24x(477)x150-24xdc(478)x150-48p(476)x150-48t(474)x150-48tdc(475)x250e-24p(463)x250e-24t(462)x250e-24tdc(468)x250e-24x(466)x250e-24xdc(470)x250e-24xtaa(467)x250e-48p(465)x250e-48t(464)x250e-48tdc(469)x350-24t(481)x350-48t(482)x430-24p(603)x430-24t(585)x430-48t(586)x430-8p(602)x435-24p-4s(679)x435-24t-4s(680)x435-8p-2t-w(683)x435-8p-4s(681)x435-8t-4s(682)x440-24p(568)x440-24p-10G(572)x440-24t(567)x440-24t-10G(571)x440-24tdc(587)x440-24x(582)x440-48p(570)x440-48p-10G(574)x440-48t(569)x440-48t-10G(573)x440-48tdc(588)x440-48x(583)x440-8p(566)x440-8t(565)x440-L2-24t(579)x440-L2-48t(580)x440G2-12p-10GE4(625)x440G2-12t-10GE4(626)x440G2-12t8fx-G4(627)x440G2-24fx-G4(629)x440G2-24p-10G4(621)x440G2-24t-10G4(622)x440G2-24t-10G4-DC(623)x440G2-24t-G4(628)x440G2-24x-10G4(624)x440G2-48p-10G4(618)x440G2-48t-10G4(619)x440G2-48t-10G4-DC(620)x450-24t(424)x450-24x(423)x450-G2-24p(607)x450-G2-24p-GE4(611)x450-G2-24t(606)x450-G2-24t-GE4(610)x450-G2-48p(609)x450-G2-48p-GE4(613)x450-G2-48t(608)x450-G2-48t-GE4(612)x450a-24t(439)x450a-24tdc(445)x450a-24x(444)x450a-24xdc(446)x450a-48t(442)x450a-48tdc(461)x450e-24p(440)x450e-24t(533)x450e-48p(443)x450e-48t(534)x460-24p(528)x460-24t(527)x460-24x(529)x460-48p(531)x460-48t(530)x460-48x(532)x460-G2-16mp-32p-10GE4(646)x460G2-24p-10G4(593)x460G2-24p-24hp(647)x460G2-24p-G4(615)x460G2-24t-10G4(592)x460G2-24t-24ht(648)x460G2-24t-G4(614)x460G2-24x-10G4(594)x460G2-48p-10G4(596)x460G2-48p-G4(617)x460G2-48t-10G4(595)x460G2-48t-G4(616)x460G2-48x-10G4(597)x465-24mu(666)x465-24mu-24w(667)x465-24s(678)x465-24w(670)x465-24xe(677)x465-48p(664)x465-48t(663)x465-48w(665)x465i-48w(684)x480-24x(511)x480-24x10G2S(514)x480-24x10G4X(517)x480-24x20G2S(556)x480-24x32G2S(520)x480-24x40G4X(559)x480-48t(513)x480-48t10G2S(516)x480-48t10G4X(519)x480-48t20G2S(543)x480-48t32G2S(522)x480-48t40G4X(561)x480-48x(512)x480-48x10G2S(515)x480-48x10G4X(518)x480-48x20G2S(542)x480-48x32G2S(521)x480-48x40G4X(560)x560-24mp-10GE4-100GE2(643)x560-48mp-10GE4-100GE2(641)x560-48mt-10GE4-100GE2(642)x590-24t-1q-2c(661)x590-24x-1q-2c(662)x620-10x(636)x620-16p(634)x620-16t(633)x620-16x(635)x620-8t-2x(637)x650-24t(483)x650-24t10G8X10G2S(489)x650-24t40G4X(558)x650-24t64G2S(491)x650-24t64G4S(493)x650-24tG4X(485)x650-24tG4X10G2S(487)x650-24x(484)x650-24x10G8X10G2S(490)x650-24x40G4X(557)x650-24x64G2S(492)x650-24x64G4S(494)x650-24xG4X(486)x650-24xG4X10G2S(488)x670-48x(546)x670G2-48x-4q(590)x670G2-72x(591)x670v-48t(578)x670v-48x(547)x690-48t-4q-2c(644)x690-48x-4q-2c(645)x695-48y-8c(660)x725-48y(671)x770-32q(589)x8500g24xa(524)x8500g48te(525)x8500g48tePoE(526)x8500msm48(523)x870-32c(639)x870-96x-8c(640)x8900g48tm(506)x8900g48tmPoE(509)x8900g48xm(507)x8900g96tc(508)x8900msm128(503)x8900msm96(638)x8900tenG24xc(504)x8900tenG8xm(505)xcm8808x(540)xcm8824f(539)xcm8848t(537)xcm888f(541)xcm88p(538)xcm88s1(536)xm2hr(480)xm2x(430)xm2xr(431)xm8xb(500)xtremeWhitebox(656)The type of the slot. It is used both for the configured as well as the inserted slot types.
UnitMultiplierINTEGERatto(-18)exa(18)femto(-15)giga(9)kilo(3)mega(6)micro(-6)milli(-3)nano(-9)peta(15)pico(-12)tera(12)units(0)yocto(-24)yotta(24)zepto(-21)zetta(21)The Unit Multiplier is an integer value that represents the IEEE 61850 Annex A units multiplier associated with the integer units used to measure the power or energy. For example, when used with pmPowerUnitMultiplier, -3 represents 10^-3 or milliwatts.
Traps / Notifications
- downloadImageTrap
1.3.6.1.4.1.1916.1.1.1.45.2.1 - extremeGenericTrap
1.3.6.1.4.1.1916.1.1.6.0.2 - extremePsuPowerStatus
1.3.6.1.4.1.1916.1.1.6.0.3 - extremeSystemPowerStatus
1.3.6.1.4.1.1916.1.1.6.0.1 - extremeSystemPowerUsageNotification
1.3.6.1.4.1.1916.1.1.6.0.4 - installImageTrap
1.3.6.1.4.1.1916.1.1.1.45.2.2