EXTREME-SERVICES-MIB
Extreme NetworksExtreme Upper layer services objects
snmptranslate -m EXTREME-SERVICES-MIB -Tpsnmpwalk -v2c -c <community> -m EXTREME-SERVICES-MIB <host> 1.3.6.1.4.1.1916.1.26Imports
| EXTREME-BASE-MIB | extremeAgent |
|---|---|
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IextremeServices | 1.3.6.1.4.1.1916.1.26 | |||
identity Extreme Upper layer services objects | ||||
| NextremeSyslog | 1.3.6.1.4.1.1916.1.26.1 | |||
| TextremeRemoteSyslogServerTable | 1.3.6.1.4.1.1916.1.26.1.1 | NA | ||
table · not-accessible · current This table is used to configure remote syslog servers and contains information on the same. | ||||
| RextremeRemoteSyslogServerEntry | 1.3.6.1.4.1.1916.1.26.1.1.1 | NA | ||
row · not-accessible · current An entry in the extremeRemoteSyslogServerTable. | ||||
| CextremeRemoteSyslogServerAddressType | 1.3.6.1.4.1.1916.1.26.1.1.1.1 | InetAddressType | RO | |
column · InetAddressType · read-only · current The type of address specified in the object
'extremeRemoteSyslogServerAddress'.
Currently, only 'ipv4' and 'dns' are supported. | ||||
| CextremeRemoteSyslogServerAddress | 1.3.6.1.4.1.1916.1.26.1.1.1.2 | InetAddress (SIZE (1..255)) | RO | |
column · InetAddress (SIZE (1..255)) · read-only · current The address of the remote syslog server. This can be a DNS name or an IPv4 address. | ||||
| CextremeRemoteSyslogServerPort | 1.3.6.1.4.1.1916.1.26.1.1.1.3 | INTEGER (0..65535) | RO | |
column · INTEGER (0..65535) · read-only · current The UDP port number of the remote syslog server
to which syslog messages will
be sent. | ||||
| CextremeRemoteSyslogServerFacility | 1.3.6.1.4.1.1916.1.26.1.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The facility which will be sent in all syslog messages to this remote syslog server.
| ||||
| CextremeRemoteSyslogServerSeverity | 1.3.6.1.4.1.1916.1.26.1.1.1.5 | Bits | RC | |
column · Bits · read-create · current The syslog message severity. All syslog messages of the specified severity for which the Bits are set, will be sent to this syslog server. When setting this object in a 'createAndGo' request, all lower bits upto and including the desired bit position must be set. For example, if bit info(4) needs to be set then bits critical(0), error(1), warning(2), notice(3) and info(4) must also be set in the request. Consequently, all syslog messages of a given severity and higher will be sent to the syslog server. It is not possible to send messages that match only a few selected non-contiguous severities.
| ||||
| CextremeRemoteSyslogServerStatus | 1.3.6.1.4.1.1916.1.26.1.1.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current The status of the Row as per standard row status conventions. Only 'createAndGo', 'active' and 'destroy' will be supported. It is not possible to change the values of the objects of a row once it has been created, except by 'destroy'ing and re-creating the row. | ||||
| SextremeEnableRemoteSyslog | 1.3.6.1.4.1.1916.1.26.1.2 | TruthValue | RW | |
scalar · TruthValue · read-write · current The enable/disable status of remote syslog messages. | ||||
| NextremeDNS | 1.3.6.1.4.1.1916.1.26.3 | |||
| TextremeDNSServerTable | 1.3.6.1.4.1.1916.1.26.3.1 | NA | ||
table · not-accessible · current This table is used to configure DNS servers. There can be at most two rows in this table. | ||||
| RextremeDNSServerEntry | 1.3.6.1.4.1.1916.1.26.3.1.1 | NA | ||
row · not-accessible · current An entry in the extremeDNSServerTable. | ||||
| CextremeDNSServerAddressIndex | 1.3.6.1.4.1.1916.1.26.3.1.1.1 | INTEGER (1..2) | NA | |
column · INTEGER (1..2) · not-accessible · current This is an integer index. Only 1 and 2 are supported for this | ||||
| CextremeDNSServerAddressType | 1.3.6.1.4.1.1916.1.26.3.1.1.2 | InetAddressType | RO | |
column · InetAddressType · read-only · current The address type of the DNS server. This can be a DNS name or an IPv4 address. | ||||
| CextremeDNSServerAddress | 1.3.6.1.4.1.1916.1.26.3.1.1.3 | InetAddress (SIZE (1..255)) | RO | |
column · InetAddress (SIZE (1..255)) · read-only · current The address of the DNS server. This can be a DNS name or an IPv4 address. | ||||
| NextremeAuthServer | 1.3.6.1.4.1.1916.1.26.4 | |||
| TextremeAuthServerEnableTable | 1.3.6.1.4.1.1916.1.26.4.1 | NA | ||
table · not-accessible · current This table is used to enable/disable Auth servers | ||||
| RextremeAuthServerEnableEntry | 1.3.6.1.4.1.1916.1.26.4.1.1 | NA | ||
row · not-accessible · current An entry in the extremeAuthServerEnableTable. | ||||
| CextremeAuthServerEnableServerType | 1.3.6.1.4.1.1916.1.26.4.1.1.1 | AuthServerType | NA | |
column · AuthServerType · not-accessible · current Specifies whether this is a radius/radius-acct/tacacs/tacacs-acct server | ||||
| CextremeAuthServerEnableAccessType | 1.3.6.1.4.1.1916.1.26.4.1.1.2 | AuthServerAccessType | NA | |
column · AuthServerAccessType · not-accessible · current Specifies whether this server is for management access or netlogin access. | ||||
| CextremeAuthServerEnable | 1.3.6.1.4.1.1916.1.26.4.1.1.3 | TruthValue | RW | |
column · TruthValue · read-write · current Enable/Disable the Radius/tacas Server | ||||
| TextremeAuthServerTable | 1.3.6.1.4.1.1916.1.26.4.2 | NA | ||
table · not-accessible · current This table is used to configure radius/tacacs servers. | ||||
| RextremeAuthServerEntry | 1.3.6.1.4.1.1916.1.26.4.2.1 | NA | ||
| CextremeAuthServerIndex | 1.3.6.1.4.1.1916.1.26.4.2.1.1 | INTEGER (1..8) | NA | |
column · INTEGER (1..8) · not-accessible · current Integer index of the server. | ||||
| CextremeAuthServerAddressType | 1.3.6.1.4.1.1916.1.26.4.2.1.2 | InetAddressType | RW | |
column · InetAddressType · read-write · current Type IP address of the radius/tacas server. | ||||
| CextremeAuthServerAddress | 1.3.6.1.4.1.1916.1.26.4.2.1.3 | InetAddress | RW | |
column · InetAddress · read-write · current IP address of the radius/tacas server. | ||||
| CextremeAuthServerClientAddressType | 1.3.6.1.4.1.1916.1.26.4.2.1.4 | InetAddressType | RW | |
column · InetAddressType · read-write · current Type of IP address to use as the SRC address when contacting the the radius/tacas server. The radius/tacas server should be configured with this address as one of its clients. The switch should have a VLAN with this IP address. | ||||
| CextremeAuthServerClientAddress | 1.3.6.1.4.1.1916.1.26.4.2.1.5 | InetAddress | RW | |
column · InetAddress · read-write · current IP address to use as the SRC address when contacting the
the radius/tacas server. The radius/tacas server should be
configured with this address as one of its clients. The
switch should have a VLAN with this IP address. | ||||
| CextremeAuthServerPort | 1.3.6.1.4.1.1916.1.26.4.2.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current Port number of the radius/tacas server. | ||||
| CextremeAuthServerSecret | 1.3.6.1.4.1.1916.1.26.4.2.1.7 | OCTET STRING | RW | |
column · OCTET STRING · read-write · current This is the shared secret between the Authenticator and radius/tacas server. This is logically write-only. | ||||
| CextremeAuthServerReTransmit | 1.3.6.1.4.1.1916.1.26.4.2.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current This is the timeout in seconds after which the Authenticator will re transmit requests to the radius/tacas server. | ||||
| CextremeAuthServerType | 1.3.6.1.4.1.1916.1.26.4.2.1.9 | AuthServerType | RW | |
column · AuthServerType · read-write · current Specifies whether this is a radius/radius-acct/tacacs/tacacs-acct server | ||||
| CextremeAuthServerIsPrimary | 1.3.6.1.4.1.1916.1.26.4.2.1.10 | TruthValue | RW | |
column · TruthValue · read-write · current Specifies whether this is the primary or the secondary server. Is TRUE if the server is primary. | ||||
| CextremeAuthServerAccessType | 1.3.6.1.4.1.1916.1.26.4.2.1.11 | AuthServerAccessType | RW | |
column · AuthServerAccessType · read-write · current Specifies whether this server is for management access or netlogin access | ||||
| CextremeAuthServerStatus | 1.3.6.1.4.1.1916.1.26.4.2.1.12 | RowStatus | RC | |
column · RowStatus · read-create · current The status of the Row as per standard row status conventions. Only 'createAndGo', 'active' and 'destroy' will be supported. It is not possible to change the values of the objects of a row once it has been created, except by 'destroy'ing and re-creating the row. | ||||
Textual conventions
AuthServerAccessTypeINTEGERmgmt-access(1)netlogin(2)Specifies whether the server is for authenticating mangement or netlogin accesses
AuthServerTypeINTEGERradius(1)radius-acct(2)tacacs(3)tacacs-acct(4)The type of authentication/accounting server.