EXTREME-POS-MIB
Extreme NetworksExtreme POS objects: objects common to POS MIBs
snmptranslate -m EXTREME-POS-MIB -Tpsnmpwalk -v2c -c <community> -m EXTREME-POS-MIB <host> 1.3.6.1.4.1.1916.1.20Imports
| EXTREME-BASE-MIB | PortList, extremeAgent |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IextremePOSMib | 1.3.6.1.4.1.1916.1.20 | |||
identity Extreme POS objects: objects common to POS MIBs | ||||
| NextremeAps | 1.3.6.1.4.1.1916.1.20.1 | |||
| NextremeApsConfig | 1.3.6.1.4.1.1916.1.20.1.1 | |||
| SextremeApsConfigEnabled | 1.3.6.1.4.1.1916.1.20.1.1.1 | TruthValue | RO | |
scalar · TruthValue · read-only · current Global APS enablement | ||||
| TextremeApsGroupConfigTable | 1.3.6.1.4.1.1916.1.20.1.1.2 | NA | ||
table · not-accessible · current This table contains configuration information by defined APS group. | ||||
| RextremeApsGroupConfigEntry | 1.3.6.1.4.1.1916.1.20.1.1.2.1 | NA | ||
row · not-accessible · current | ||||
| CextremeApsGroupConfigGroupNumber | 1.3.6.1.4.1.1916.1.20.1.1.2.1.1 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current The group number which uniquely identifies the APS group. | ||||
| CextremeApsGroupConfigRevertMode | 1.3.6.1.4.1.1916.1.20.1.1.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The revertive mode configured for the APS group. This indicates whether APS will switch-back automatically after the working line error is cleared. In non-revertive mode, manual intervention is required for switch-back.
| ||||
| CextremeApsGroupConfigRevertMinutes | 1.3.6.1.4.1.1916.1.20.1.1.2.1.3 | INTEGER (0..12) | RO | |
column · INTEGER (0..12) · read-only · current The number of minutes APS will wait after the error has been cleared before switching back to the working line. During this interval, the K1 request will indicate WTR (wait-to-restore). This field is only valid in revertive mode. | ||||
| CextremeApsGroupConfigDirection | 1.3.6.1.4.1.1916.1.20.1.1.2.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The directional mode configured for the APS group. This indicates whether protection switches are coordinated between both POS equipment and ADM (bidirectional) or not (unidirectional).
| ||||
| CextremeApsGroupConfigTimerInterval | 1.3.6.1.4.1.1916.1.20.1.1.2.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The number of seconds between APS out-of-band peer protocol hello messages. This value is relevant when the working line and protection line exist is physically different chassis. | ||||
| CextremeApsGroupConfigTimerMisses | 1.3.6.1.4.1.1916.1.20.1.1.2.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The number of APS out-of-band peer protocol messages transmitted without receiving a response before the protection switch declares the working switch inoperable. When this occurs the protection switch initiates a line switch over via APS. | ||||
| CextremeApsGroupConfigAuthenticate | 1.3.6.1.4.1.1916.1.20.1.1.2.1.7 | TruthValue | RO | |
column · TruthValue · read-only · current When enabled, the authentication string on both working and protection switches must match. | ||||
| CextremeApsGroupConfigAuthString | 1.3.6.1.4.1.1916.1.20.1.1.2.1.8 | DisplayString (SIZE (0..8)) | RO | |
column · DisplayString (SIZE (0..8)) · read-only · current If configured, this is the authentication string that must match between working and protection switches. This field is relevant if the APS group is configured to authenticate. | ||||
| TextremeApsPortConfigTable | 1.3.6.1.4.1.1916.1.20.1.1.3 | NA | ||
table · not-accessible · current This table contains configuration information for APS ports. | ||||
| RextremeApsPortConfigEntry | 1.3.6.1.4.1.1916.1.20.1.1.3.1 | NA | ||
row · not-accessible · current | ||||
| CextremeApsPortConfigGroupNumber | 1.3.6.1.4.1.1916.1.20.1.1.3.1.1 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current The group number which uniquely identifies the APS group. | ||||
| CextremeApsPortConfigPortNumber | 1.3.6.1.4.1.1916.1.20.1.1.3.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The value of ifIndex that identifies the port. | ||||
| CextremeApsPortConfigPortType | 1.3.6.1.4.1.1916.1.20.1.1.3.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The port type designation.
| ||||
| TextremeApsProtectPortConfigTable | 1.3.6.1.4.1.1916.1.20.1.1.4 | NA | ||
table · not-accessible · current This table contains configuration information for APS protection ports. | ||||
| RextremeApsProtectPortConfigEntry | 1.3.6.1.4.1.1916.1.20.1.1.4.1 | NA | ||
row · not-accessible · current | ||||
| CextremeApsProtectPortConfigGroupNumber | 1.3.6.1.4.1.1916.1.20.1.1.4.1.1 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current The group number which uniquely identifies the APS group. | ||||
| CextremeApsProtectPortConfigPortNumber | 1.3.6.1.4.1.1916.1.20.1.1.4.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The value of ifIndex that identifies the protection port. | ||||
| CextremeApsProtectPortConfigWorkingIpAddr | 1.3.6.1.4.1.1916.1.20.1.1.4.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address of the working switch. If the working and protection lines reside on the same chassis, this IP address will be a local address. | ||||
| NextremeApsStatus | 1.3.6.1.4.1.1916.1.20.1.2 | |||
| TextremeApsGroupTable | 1.3.6.1.4.1.1916.1.20.1.2.1 | NA | ||
table · not-accessible · current This table contains run-time information by defined APS group. | ||||
| RextremeApsGroupEntry | 1.3.6.1.4.1.1916.1.20.1.2.1.1 | NA | ||
row · not-accessible · current | ||||
| CextremeApsGroupGroupNumber | 1.3.6.1.4.1.1916.1.20.1.2.1.1.1 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current The group number which uniquely identifies the APS group. | ||||
| CextremeApsGroupActivePort | 1.3.6.1.4.1.1916.1.20.1.2.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The APS port which is currently carrying the network traffic.
| ||||
| CextremeApsGroupEffectiveDirection | 1.3.6.1.4.1.1916.1.20.1.2.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The effective directional mode for the APS group. When this value differs from the configured directional mode, check the ADM and switch provisioning for a mis- configuration.
| ||||
| CextremeApsGroupPeerProtoStatus | 1.3.6.1.4.1.1916.1.20.1.2.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The APS out-of-band peer protocol status for a group.
| ||||
| TextremeApsProtectPortTable | 1.3.6.1.4.1.1916.1.20.1.2.2 | NA | ||
table · not-accessible · current This table contains run-time information by defined APS protection port. | ||||
| RextremeApsProtectPortEntry | 1.3.6.1.4.1.1916.1.20.1.2.2.1 | NA | ||
row · not-accessible · current | ||||
| CextremeApsProtectPortGroupNumber | 1.3.6.1.4.1.1916.1.20.1.2.2.1.1 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current The group number which uniquely identifies the APS group. | ||||
| CextremeApsProtectPortPortNumber | 1.3.6.1.4.1.1916.1.20.1.2.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The value of ifIndex that identifies the protection port. | ||||
| CextremeApsProtectPortTransmitK1 | 1.3.6.1.4.1.1916.1.20.1.2.2.1.3 | OCTET STRING (SIZE (1)) | RO | |
column · OCTET STRING (SIZE (1)) · read-only · current The K1 overhead byte currently being transmitted on the indicated protection port. | ||||
| CextremeApsProtectPortTransmitK2 | 1.3.6.1.4.1.1916.1.20.1.2.2.1.4 | OCTET STRING (SIZE (1)) | RO | |
column · OCTET STRING (SIZE (1)) · read-only · current The K2 overhead byte currently being transmitted on the indicated protection port. | ||||
| CextremeApsProtectPortReceiveK1 | 1.3.6.1.4.1.1916.1.20.1.2.2.1.5 | OCTET STRING (SIZE (1)) | RO | |
column · OCTET STRING (SIZE (1)) · read-only · current The K1 overhead byte currently being received on the indicated protection port. | ||||
| CextremeApsProtectPortReceiveK2 | 1.3.6.1.4.1.1916.1.20.1.2.2.1.6 | OCTET STRING (SIZE (1)) | RO | |
column · OCTET STRING (SIZE (1)) · read-only · current The K2 overhead byte currently being received on the indicated protection port. | ||||
| CextremeApsProtectPortSwitchInitByWorking | 1.3.6.1.4.1.1916.1.20.1.2.2.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The number of switches that have been initiated by the working-line router. | ||||
| CextremeApsProtectPortSwitchInitByProtect | 1.3.6.1.4.1.1916.1.20.1.2.2.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The number of switches that have been initiated by the protection-line router. | ||||
| CextremeApsProtectPortSwitchInitByADM | 1.3.6.1.4.1.1916.1.20.1.2.2.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current The number of switches that have been initiated by the ADM. | ||||
| CextremeApsProtectPortSwitchInitByCmd | 1.3.6.1.4.1.1916.1.20.1.2.2.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current The number of switches that have been initiated by an external CLI command. | ||||
| CextremeApsProtectPortSuccessfulSwitches | 1.3.6.1.4.1.1916.1.20.1.2.2.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current The number of successful APS line switches. | ||||
| CextremeApsProtectPortHelloProtFails | 1.3.6.1.4.1.1916.1.20.1.2.2.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current The number of APS out-of-band peer protocol failures recorded. This situation causes the protection-line router to initiate a line switch. | ||||
| NextremeApsErrors | 1.3.6.1.4.1.1916.1.20.1.3 | |||
| TextremeApsLineErrorTable | 1.3.6.1.4.1.1916.1.20.1.3.1 | NA | ||
table · not-accessible · current This table contains APS line error information. | ||||
| RextremeApsLineErrorEntry | 1.3.6.1.4.1.1916.1.20.1.3.1.1 | NA | ||
row · not-accessible · current | ||||
| CextremeApsLineErrorGroupNumber | 1.3.6.1.4.1.1916.1.20.1.3.1.1.1 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current The group number which uniquely identifies the APS group. | ||||
| CextremeApsLineErrorPortNumber | 1.3.6.1.4.1.1916.1.20.1.3.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The ifIndex value which identifies the APS port. | ||||
| CextremeApsLineErrorSignalDegradeActive | 1.3.6.1.4.1.1916.1.20.1.3.1.1.3 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates whether a signal degrade condition currently exists on the line. | ||||
| CextremeApsLineErrorBERSignalDegradeActive | 1.3.6.1.4.1.1916.1.20.1.3.1.1.4 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates whether a signal degrade condition due to excessive Bit-Error-Rate currently exists on the line. | ||||
| CextremeApsLineErrorSignalFailActive | 1.3.6.1.4.1.1916.1.20.1.3.1.1.5 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates whether a signal fail condition currently exists on the line. | ||||
| CextremeApsLineErrorBERSignalFailActive | 1.3.6.1.4.1.1916.1.20.1.3.1.1.6 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates whether a signal fail condition due to excessive Bit-Error-Rate currently exists on the line. | ||||
| CextremeApsLineErrorSignalDegrades | 1.3.6.1.4.1.1916.1.20.1.3.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The number of signal degrades that have been recorded on the line. | ||||
| CextremeApsLineErrorBERSignalDegrades | 1.3.6.1.4.1.1916.1.20.1.3.1.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The number of signal degrades due to excessive Bit-Error-Rate that have been recorded on the line. | ||||
| CextremeApsLineErrorSignalFails | 1.3.6.1.4.1.1916.1.20.1.3.1.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current The number of signal fails that have been recorded on the line. | ||||
| CextremeApsLineErrorBERSignalFails | 1.3.6.1.4.1.1916.1.20.1.3.1.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current The number of signal fails due to excessive Bit-Error-Rate that have been recorded on the line. | ||||
| TextremeApsProtocolErrorTable | 1.3.6.1.4.1.1916.1.20.1.3.2 | NA | ||
table · not-accessible · current This table contains APS protocol error information. These errors are relevant for APS protection ports. | ||||
| RextremeApsProtocolErrorEntry | 1.3.6.1.4.1.1916.1.20.1.3.2.1 | NA | ||
row · not-accessible · current | ||||
| CextremeApsProtocolErrorGroupNumber | 1.3.6.1.4.1.1916.1.20.1.3.2.1.1 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current The group number which uniquely identifies the APS group. | ||||
| CextremeApsProtocolErrorPortNumber | 1.3.6.1.4.1.1916.1.20.1.3.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The ifIndex value which identifies the APS protection port. | ||||
| CextremeApsProtocolErrorModeMismatchDefect | 1.3.6.1.4.1.1916.1.20.1.3.2.1.3 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates whether a Mode Mismatch defect currently exists on the port. | ||||
| CextremeApsProtocolErrorProtSwitchByteDefect | 1.3.6.1.4.1.1916.1.20.1.3.2.1.4 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates whether a Protection Switching Byte defect currently exists on the port. | ||||
| CextremeApsProtocolErrorChannelMismatchDefect | 1.3.6.1.4.1.1916.1.20.1.3.2.1.5 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates whether a Channel Mismatch defect currently exists on the port. | ||||
| CextremeApsProtocolErrorFarEndProtectDefect | 1.3.6.1.4.1.1916.1.20.1.3.2.1.6 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates whether a Far-End Protection defect currently exists on the port. | ||||
| CextremeApsProtocolErrorModeMismatchFailure | 1.3.6.1.4.1.1916.1.20.1.3.2.1.7 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates whether a Mode Mismatch failure currently exists on the port. | ||||
| CextremeApsProtocolErrorProtSwitchByteFailure | 1.3.6.1.4.1.1916.1.20.1.3.2.1.8 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates whether a Protection Switching Byte failure currently exists on the port. | ||||
| CextremeApsProtocolErrorChannelMismatchFailure | 1.3.6.1.4.1.1916.1.20.1.3.2.1.9 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates whether a Channel Mismatch failure currently exists on the port. | ||||
| CextremeApsProtocolErrorFarEndProtectFailure | 1.3.6.1.4.1.1916.1.20.1.3.2.1.10 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates whether a Far-End Protection failure currently exists on the port. | ||||
| CextremeApsProtocolErrorModeMismatchNumFails | 1.3.6.1.4.1.1916.1.20.1.3.2.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current The number of Mode Mismatch failures that have been recorded. | ||||
| CextremeApsProtocolErrorProtSwitchByteNumFails | 1.3.6.1.4.1.1916.1.20.1.3.2.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current The number of Protection Switching Byte failures that have been recorded. | ||||
| CextremeApsProtocolErrorChannelMismatchNumFails | 1.3.6.1.4.1.1916.1.20.1.3.2.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current The number of Channel Mismatch failures that have been recorded. | ||||
| CextremeApsProtocolErrorFarEndProtectNumFails | 1.3.6.1.4.1.1916.1.20.1.3.2.1.14 | INTEGER | RO | |
column · INTEGER · read-only · current The number of Far-End Protection failures that have been recorded. | ||||