EXTREME-EAPS-MIB
Extreme NetworksEthernet Automatic Protection Switching information.
snmptranslate -m EXTREME-EAPS-MIB -Tpsnmpwalk -v2c -c <community> -m EXTREME-EAPS-MIB <host> 1.3.6.1.4.1.1916.1.18Imports
| EXTREME-BASE-MIB | extremeAgent |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IextremeEaps | 1.3.6.1.4.1.1916.1.18 | |||
identity Ethernet Automatic Protection Switching information. | ||||
| TextremeEapsTable | 1.3.6.1.4.1.1916.1.18.1 | NA | ||
table · not-accessible · current This table contains EAPS information about all EAPS domains on this device. | ||||
| RextremeEapsEntry | 1.3.6.1.4.1.1916.1.18.1.1 | NA | ||
row · not-accessible · current An individual entry of this table contains EAPS information related to that EAPS domain.
| ||||
| CextremeEapsName | 1.3.6.1.4.1.1916.1.18.1.1.1 | DisplayString (SIZE (1..32)) | RO | |
column · DisplayString (SIZE (1..32)) · read-only · current The EAPS domain name. | ||||
| CextremeEapsMode | 1.3.6.1.4.1.1916.1.18.1.1.2 | EapsDomainMode | RC | |
column · EapsDomainMode · read-create · current This indicates the mode of the EAPS domain. | ||||
| CextremeEapsState | 1.3.6.1.4.1.1916.1.18.1.1.3 | EapsDomainState | RO | |
column · EapsDomainState · read-only · current This indicates the current EAPS state of this EAPS domain. | ||||
| CextremeEapsFailedFlag | 1.3.6.1.4.1.1916.1.18.1.1.4 | TruthValue | RO | |
column · TruthValue · read-only · current This indicates the status of the failed flag. If the failed timer expires while its expiry action is configured to sendAlert, this failed flag is set. It is then cleared when the failed timer stops expiring, or the expiry action is configured to openSecondaryPort. | ||||
| CextremeEapsEnabled | 1.3.6.1.4.1.1916.1.18.1.1.5 | TruthValue | RC | |
column · TruthValue · read-create · current This indicated if this domain has been enabled or not. | ||||
| CextremeEapsPrimaryPort | 1.3.6.1.4.1.1916.1.18.1.1.6 | EapsRingPort | RC | |
column · EapsRingPort · read-create · current This indicates the EAPS domain's primary ring-port. Value of 0 indicates the primary port is still not configured | ||||
| CextremeEapsSecondaryPort | 1.3.6.1.4.1.1916.1.18.1.1.7 | EapsRingPort | RC | |
column · EapsRingPort · read-create · current This indicates the EAPS domain's secondary ring-port. Value of 0 indicates the secondary port is still not configured | ||||
| CextremeEapsHelloTimer | 1.3.6.1.4.1.1916.1.18.1.1.8 | INTEGER (0..15) | RC | |
column · INTEGER (0..15) · read-create · current This indicates the EAPS domain's hello timer's value in seconds. | ||||
| CextremeEapsFailedTimer | 1.3.6.1.4.1.1916.1.18.1.1.9 | INTEGER (2..300) | RC | |
column · INTEGER (2..300) · read-create · current This indicates the EAPS domain's failed timer's value in seconds. | ||||
| CextremeEapsFailedTimerExpiryAction | 1.3.6.1.4.1.1916.1.18.1.1.10 | EapsFailTimerExpiryAction | RC | |
column · EapsFailTimerExpiryAction · read-create · current This indicates the action taken by the domain when the fail timer expires. If the action is to sendAlert, then a SNMP trap - extremeEapsFailTimerExpFlagSet - will be sent, and the secondary port will continue to remain in blocking state. If the action is to openSecondaryPort, then the secondary port will open and be set to forwarding state. | ||||
| CextremeEapsUnconfigRingPort | 1.3.6.1.4.1.1916.1.18.1.1.11 | EapsPortType | RW | |
column · EapsPortType · read-write · current This specifies which EAPS domain port is being unconfigured. Value of 1, indicates unconfigure the primary port. Value of 2, indicates unconfigure secondary port. | ||||
| CextremeEapsPrimaryStatus | 1.3.6.1.4.1.1916.1.18.1.1.12 | EapsDomainPortStatus | RO | |
column · EapsDomainPortStatus · read-only · current This indicates the status of the EAPS domain's primary ring-port. | ||||
| CextremeEapsSecondaryStatus | 1.3.6.1.4.1.1916.1.18.1.1.13 | EapsDomainPortStatus | RO | |
column · EapsDomainPortStatus · read-only · current This indicates the status of the EAPS domain's secondary ring-port. | ||||
| CextremeEapsProtectedVlansCount | 1.3.6.1.4.1.1916.1.18.1.1.14 | INTEGER (0..65535) | RO | |
column · INTEGER (0..65535) · read-only · current This gives the count of the number of vlans that are being protected by this EAPS domain. | ||||
| CextremeEapsRowStatus | 1.3.6.1.4.1.1916.1.18.1.1.15 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this entry as per standard RowStatus conventions. | ||||
| CextremeEapsHelloTimerMs | 1.3.6.1.4.1.1916.1.18.1.1.16 | INTEGER (100..900) | RO | |
column · INTEGER (100..900) · read-only · current This indicates the milliseconds portion of the EAPS domain's hello timer value in milliseconds. | ||||
| CextremeEapsPriority | 1.3.6.1.4.1.1916.1.18.1.1.17 | EapsDomainPriority | RC | |
column · EapsDomainPriority · read-create · current This gives the priority of the domain. Used along with spatial re-use to prioritize handling of domains during a topology change. | ||||
| SextremeEapsPrevState | 1.3.6.1.4.1.1916.1.18.2 | EapsDomainState | AN | |
scalar · EapsDomainState · accessible-for-notify · current This indicates the previous EAPS state of this EAPS domain. Used in state change traps information. | ||||
| NextremeEapsGlobalInfo | 1.3.6.1.4.1.1916.1.18.3 | |||
| SextremeEapsGlobalEnabled | 1.3.6.1.4.1.1916.1.18.3.1 | TruthValue | RW | |
scalar · TruthValue · read-write · current Indicates if EAPS is enabled globally on the switch. | ||||
| SextremeEapsGlobalFastConvergence | 1.3.6.1.4.1.1916.1.18.3.2 | TruthValue | RW | |
scalar · TruthValue · read-write · current Indicates if Fast Convergence is enabled globally on the switch. | ||||
| SextremeEapsLastConfigurationChange | 1.3.6.1.4.1.1916.1.18.3.3 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current Indicates the last time there was any change in EAPS configuration on the switch. | ||||
| SextremeEapsLastStatusChange | 1.3.6.1.4.1.1916.1.18.3.4 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current Indicates the last time there was any change in
EAPS domain, EAPS port, shared port, or segment status on
the switch. Time changes for extremeEapsState,
extremeEapsSharedPortState, extremeEapsSharedPortSegmentStatus,
extremeEapsFailedFlag, extremeEapsPrimaryStatus,
extremeEapsSecondaryStatus, extremeEapsSharedPortNbrStatus,
extremeEapsSharedPortRootBlockerStatus,
extremeEapsSharedPortSegmentFlagFailed. | ||||
| SextremeEapsStatusTrapCount | 1.3.6.1.4.1.1916.1.18.3.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current Indicates the number of status traps sent out since the switch
booted. Status traps counted include
extremeEapsSharedPortStateChange
extremeEapsRootBlockerStatusChange
extremeEapsPortStatusChange
extremeEapsStateChange
extremeEapsFailTimerExpFlagSet
extremeEapsFailTimerExpFlagClear. | ||||
| SextremeEapsGlobalMulticastAddRingPorts | 1.3.6.1.4.1.1916.1.18.3.6 | TruthValue | RW | |
scalar · TruthValue · read-write · current Ring ports are added to existing multicast groups for protected vlans on a topology change event. | ||||
| SextremeEapsGlobalMulticastSendIGMPQuery | 1.3.6.1.4.1.1916.1.18.3.7 | TruthValue | RW | |
scalar · TruthValue · read-write · current IGMP Query is sent out on all protected vlans on a topology change event. | ||||
| SextremeEapsGlobalMulticastTempFlooding | 1.3.6.1.4.1.1916.1.18.3.8 | TruthValue | RW | |
scalar · TruthValue · read-write · current Temporary Multicast flooding occurs on all protected vlans on a topology change event. | ||||
| SextremeEapsGlobalMulticastTempFloodingDuration | 1.3.6.1.4.1.1916.1.18.3.9 | Unsigned32 | RW | |
scalar · Unsigned32 · read-write · current The duration at which temporary Multicast flooding will occur. | ||||
| TextremeEapsMbrVlanTable | 1.3.6.1.4.1.1916.1.18.4 | NA | ||
table · not-accessible · current This table contains the control and all protected vlans added to each EAPS domain on this device. There can be only 1 control vlan, while many protected vlans added to a EAPS domain. | ||||
| RextremeEapsMbrVlanEntry | 1.3.6.1.4.1.1916.1.18.4.1 | NA | ||
row · not-accessible · current An individual entry of this table correlates a EAPS domain with a VLAN added to it and its type whether it is control or protected. | ||||
| CextremeEapsMbrVlanName | 1.3.6.1.4.1.1916.1.18.4.1.1 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current The member VLAN's name. | ||||
| CextremeEapsMbrVlanType | 1.3.6.1.4.1.1916.1.18.4.1.2 | EapsMbrVlanType | RO | |
column · EapsMbrVlanType · read-only · current The member VLAN's type whether it is control or protected. | ||||
| CextremeEapsMbrVlanTag | 1.3.6.1.4.1.1916.1.18.4.1.3 | INTEGER (1..4095) | RO | |
column · INTEGER (1..4095) · read-only · current The member VLAN's Vlan Id tag. | ||||
| CextremeEapsMbrVlanRowStatus | 1.3.6.1.4.1.1916.1.18.4.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this entry as per standard RowStatus conventions. | ||||
| TextremeEapsSharedPortTable | 1.3.6.1.4.1.1916.1.18.5 | NA | ||
table · not-accessible · current This table contains all EAPS shared ports configured on this device. | ||||
| RextremeEapsSharedPortEntry | 1.3.6.1.4.1.1916.1.18.5.1 | NA | ||
row · not-accessible · current An individual entry of this table describes the configuration of an EAPS shared port. | ||||
| CextremeEapsSharedPortIfIndex | 1.3.6.1.4.1.1916.1.18.5.1.1 | EapsRingPort | RO | |
column · EapsRingPort · read-only · current The ifIndex of a port configured as an EAPS shared port. | ||||
| CextremeEapsSharedPortMode | 1.3.6.1.4.1.1916.1.18.5.1.2 | EapsSharedPortMode | RC | |
column · EapsSharedPortMode · read-create · current The configured mode of the EAPS shared port. | ||||
| CextremeEapsSharedPortLinkId | 1.3.6.1.4.1.1916.1.18.5.1.3 | INTEGER (0..65534) | RC | |
column · INTEGER (0..65534) · read-create · current The configured Link Id for the EAPS shared port. Each common link in the entire network will be assigned a unique link Id. Each shared-port instance on either end of this common link will be configured with this link Id. Value of 0 indicates the link Id is still not configured. | ||||
| CextremeEapsSharedPortSegmentTimerExpiryAction | 1.3.6.1.4.1.1916.1.18.5.1.4 | EapsSharedPortSegmentTimerExpiryAction | RC | |
column · EapsSharedPortSegmentTimerExpiryAction · read-create · current This indicates the action taken by the EAPS Shared port instance when a segment timer expires. If the action is sendAlert, then when the segment timer expires, an SNMP trap will be sent, and the segment will remain in Up state, with the failed flag set to True. If the action is segmentDown, then when the timer expires, the segment will be set to Down state. | ||||
| CextremeEapsSharedPortState | 1.3.6.1.4.1.1916.1.18.5.1.5 | EapsSharedPortState | RO | |
column · EapsSharedPortState · read-only · current This indicates the state of the EAPS Shared port instance. The states can be idle(0), ready(1), blocking(2), and preforwarding(3). | ||||
| CextremeEapsSharedPortNbrStatus | 1.3.6.1.4.1.1916.1.18.5.1.6 | EapsSharedPortNeighborStatus | RO | |
column · EapsSharedPortNeighborStatus · read-only · current This indicates the status of reachabilty to the neighbor on the other end of the Shared-segment. If the neighbor on the other end is reachable with matching link-id and different modes, then the status is NeighborUp. If the neighbor is not reachable, this status is NeighborDown. If the neighbor is reachable, but with the same mode, then this status is set to Error. | ||||
| CextremeEapsSharedPortDomainsCount | 1.3.6.1.4.1.1916.1.18.5.1.7 | INTEGER (0..65535) | RO | |
column · INTEGER (0..65535) · read-only · current This gives the count of the number of EAPS domains that are sharing this shared-port. | ||||
| CextremeEapsSharedPortProtectedVlansCount | 1.3.6.1.4.1.1916.1.18.5.1.8 | INTEGER (0..65535) | RO | |
column · INTEGER (0..65535) · read-only · current This gives the count of the number of vlans that are being protected by this shared-port instance. | ||||
| CextremeEapsSharedPortRootBlockerStatus | 1.3.6.1.4.1.1916.1.18.5.1.9 | EapsSharedPortRootBlockerStatus | RO | |
column · EapsSharedPortRootBlockerStatus · read-only · current If this shared port instance is not in Root blocker state, the status is False. If the shared port is in Root blocker state, and its path detect message is being returned to it, it is in Active state. If the shared port is in Root blocker state, but its path detect message is not making it back to itself, then its root blocker status is Inactive. | ||||
| CextremeEapsSharedPortRootBlockerId | 1.3.6.1.4.1.1916.1.18.5.1.10 | INTEGER (0..65535) | RO | |
column · INTEGER (0..65535) · read-only · current This is the Link Id of the Root Blocker in the entire network. If there is no root blocker in the network, this value is 65535. | ||||
| CextremeEapsSharedPortRowStatus | 1.3.6.1.4.1.1916.1.18.5.1.11 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this entry as per standard RowStatus conventions. | ||||
| CextremeEapsSharedPortSegmentHealthInterval | 1.3.6.1.4.1.1916.1.18.5.1.12 | INTEGER (0..15) | RO | |
column · INTEGER (0..15) · read-only · current Interval at which health check PDUs are sent out each segment port. | ||||
| CextremeEapsSharedPortSegmentTimeout | 1.3.6.1.4.1.1916.1.18.5.1.13 | INTEGER (3..30) | RO | |
column · INTEGER (3..30) · read-only · current Time in seconds where segment fail timer expires, fail flag is set, and expiry action is taken. | ||||
| CextremeEapsSharedPortCommonPathFailedFlag | 1.3.6.1.4.1.1916.1.18.5.1.14 | TruthValue | RO | |
column · TruthValue · read-only · current Shared port link fail timer expired, but our shared port link is up. | ||||
| CextremeEapsSharedPortCommonPathHealthInterval | 1.3.6.1.4.1.1916.1.18.5.1.15 | INTEGER (1..10) | RO | |
column · INTEGER (1..10) · read-only · current Interval at which health check PDUs are sent out shared port. | ||||
| CextremeEapsSharedPortCommonPathTimeout | 1.3.6.1.4.1.1916.1.18.5.1.16 | INTEGER (3..30) | RO | |
column · INTEGER (3..30) · read-only · current Time in seconds where shared link fail timer expires and fail flag is set | ||||
| TextremeEapsSharedPortSegmentTable | 1.3.6.1.4.1.1916.1.18.6 | NA | ||
table · not-accessible · current This table contains the EAPS shared port's segments information | ||||
| RextremeEapsSharedPortSegmentEntry | 1.3.6.1.4.1.1916.1.18.6.1 | NA | ||
row · not-accessible · current An individual entry of this table describes the EAPS shared port's segment information. It will describe the EAPS domain, the segment's status, and other information related to neighboring node's blocking status. | ||||
| CextremeEapsSharedPortSegmentPort | 1.3.6.1.4.1.1916.1.18.6.1.1 | EapsRingPort | RO | |
column · EapsRingPort · read-only · current The segment port on a segment which is part of an EAPS shared port. | ||||
| CextremeEapsSharedPortSegmentStatus | 1.3.6.1.4.1.1916.1.18.6.1.2 | EapsSharedPortSegmentStatus | RO | |
column · EapsSharedPortSegmentStatus · read-only · current The status of a segment port which is part of an EAPS shared port. | ||||
| CextremeEapsSharedPortSegmentFailedFlag | 1.3.6.1.4.1.1916.1.18.6.1.3 | TruthValue | RO | |
column · TruthValue · read-only · current The status of the failed flag on a segment port which is part of an EAPS shared port. This flag will be set to TRUE if the segment's fail timer expiry action is set to sendAlert, and this timer expires | ||||
| CextremeEapsSharedPortSegmentVlanPortCount | 1.3.6.1.4.1.1916.1.18.6.1.4 | INTEGER (0..65535) | RO | |
column · INTEGER (0..65535) · read-only · current The count of vlan ports being protected under this segment's EAPS domain. | ||||
| CextremeEapsSharedPortSegmentAdjId | 1.3.6.1.4.1.1916.1.18.6.1.5 | INTEGER (0..65535) | RO | |
column · INTEGER (0..65535) · read-only · current The link Id of a neighboring node if the neighbor's shared port instance was in blocking state. | ||||
| CextremeEapsSharedPortSegmentRBD | 1.3.6.1.4.1.1916.1.18.6.1.6 | INTEGER (0..65535) | RO | |
column · INTEGER (0..65535) · read-only · current The Root Blocker Id as determined by the neighboring node's shared port instance. | ||||
| TextremeEapsSharedPortVlanTable | 1.3.6.1.4.1.1916.1.18.7 | NA | ||
table · not-accessible · current This table contains all VLANs protected by the EAPS Shared Port instance. | ||||
| RextremeEapsSharedPortVlanEntry | 1.3.6.1.4.1.1916.1.18.7.1 | NA | ||
row · not-accessible · current An individual entry of this table correlates a EAPS Shared port instance with a VLAN protected by it. | ||||
| CextremeEapsSharedPortVlanName | 1.3.6.1.4.1.1916.1.18.7.1.1 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current The vlan being protected under this EAPS Shared port instance | ||||
| CextremeEapsSharedPortVlanPortCount | 1.3.6.1.4.1.1916.1.18.7.1.2 | INTEGER (0..65535) | RO | |
column · INTEGER (0..65535) · read-only · current The count of vlan ports being protected under this vlan | ||||
| CextremeEapsSharedPortVlanActiveOpenPort | 1.3.6.1.4.1.1916.1.18.7.1.3 | EapsRingPort | RO | |
column · EapsRingPort · read-only · current Segment port that is Active Open. If there is no Active open port, then this value is 0. | ||||
| TextremeEapsSharedPortVlanPortTable | 1.3.6.1.4.1.1916.1.18.8 | NA | ||
table · not-accessible · current This table contains the EAPS shared port's vlan-port's information | ||||
| RextremeEapsSharedPortVlanPortEntry | 1.3.6.1.4.1.1916.1.18.8.1 | NA | ||
row · not-accessible · current An individual entry of this table describes the EAPS shared port's vlan port information. It will describe the status of the vlan port under its protection. | ||||
| CextremeEapsSharedPortVlanPortStatus | 1.3.6.1.4.1.1916.1.18.8.1.1 | EapsSharedPortVlanPortStatus | RO | |
column · EapsSharedPortVlanPortStatus · read-only · current The status of a vlan port which is getting protected by an EAPS shared port. | ||||
Textual conventions
EapsDomainModeINTEGERinvalid(0)master(1)transit(2)Indicates the configured mode of an EAPS domain.
EapsDomainPortStatusINTEGERblocked(3)down(2)unknown(0)up(1)The operational state of an EAPS domain's ring-ports. If the state is unknown (0), it indicates the domain is still not up yet. The valid states are up(1), down(2), blocked(3).
EapsDomainPriorityINTEGERhigh(1)normal(0)Indicates the configured priority of an EAPS domain.
EapsDomainStateINTEGERcomplete(1)failed(2)idle(0)init(6)linkdown(4)linksup(3)precomplete(7)preforwarding(5)preinit(8)The operational state of an EAPS domain. The states complete(1), failed(2), init(6), precomplete(7), and preinit(8) apply only to domains configured as master. The states linksup(3), linkdown(4) and preforwarding(5) apply only to domains configured as transit. The state init(0) applys to domains configured as either master or transit.
EapsFailTimerExpiryActionINTEGERopenSecondaryPort(1)sendAlert(0)The action to take when the failed timer expires. If action is configured to sendAlert(0), and the fail expires, the Master will remain in Complete or Init state, and a trap - extremeEapsFailTimerExpFlagSet - will be sent. When this fail timer stops expiring another trap - extremeEapsFailTimerExpFlagClear - will be sent. If the action is configured to openSecondaryPort(1), and the fail timer expires, the Master's state will be set to Failed, and it will open the secondary port.
EapsMbrVlanTypeINTEGERcontrol(1)protected(2)unassigned(0)Indicates the type of vlan, whether it is control or protected vlan, that is being added to the EAPS domain.
EapsPortTypeINTEGERprimary(1)secondary(2)Indicates the ring port of the EAPS domains. The ring port can be primary or secondary. This is used to specify which port is being unconfigured.
EapsRingPortINTEGER (0..2147483647)This represents an EAPS ring-port.
controller(1)partner(2)unconfigured(0)If the mode is unconfigured(0), it indicates the EAPS shared port's mode has yet to be configured. The valid configured modes of an EAPS Shared-port are controller(1) and partner(2)
neighborDown(0)neighborError(2)neighborUp(1)The operational status of an EAPS Shared-port's neighbor reachabilty. The states are neighborDown(0), neighborUp(1), and neighborError(2).
active(1)false(0)inactive(2)The operational status of an EAPS Shared-port's Root- Blocker. The states are false(0), active(1), and inactive(2).
segBlockingDown(4)segBlockingUp(3)segDown(2)segUp(1)unknown(0)The operational status of an EAPS Shared-port's segments. The states are unknown(0), segUp(1), segDown(2), segBlockingUp(3) and segBlockingDown(4).
segmentDown(1)sendAlert(0)The action to take when the EAPS Shared-port's segment timer expires. If action is configured to sendAlert(0), and the segment timer expires, the segment's status will remain in Up state, and a trap - extremeEapsSegmentTimerExpFlagSet - will be sent. When this segment timer stops expiring another trap - extremeEapsSegmentTimerExpFlagClear - will be sent. If the action is configured to segmentDown(1), and the segment timer expires, the segment's status will be set to Down.
blocking(2)idle(0)preforwarding(3)ready(1)The operational state of an EAPS Shared-Port instance. The states are idle(0), ready(1), blocking(2), and preforwarding(3).
activeOpen(1)blocked(2)down(4)open(3)unknown(0)The operational status of an EAPS Shared-port's vlan-port. The states are unknown(0), activeOpen(1), blocked(2), open(3) and down(4).