EXTREME-CABLE-MIB
Extreme NetworksExtreme-specific Cable objects
snmptranslate -m EXTREME-CABLE-MIB -Tpsnmpwalk -v2c -c <community> -m EXTREME-CABLE-MIB <host> 1.3.6.1.4.1.1916.1.24Imports
| EXTREME-BASE-MIB | extremeAgent, extremeV2Traps, extremenetworks |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IextremeCable | 1.3.6.1.4.1.1916.1.24 | |||
identity Extreme-specific Cable objects | ||||
| NextremeDiagConfigGroup | 1.3.6.1.4.1.1916.1.24.1 | |||
| SextremeDiagConfigTime | 1.3.6.1.4.1.1916.1.24.1.1 | DisplayString (SIZE (16)) | RW | |
scalar · DisplayString (SIZE (16)) · read-write · current Indicates the time at which the Diagnostics information will be collected for the ports which have Auto-Diagnostics configured. Time must be given in hh:mm:ss format where hh, mm and ss are in decimals | ||||
| SextremeDiagConfigRoF | 1.3.6.1.4.1.1916.1.24.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Indicates whether a port should return to INIT state on Diagnostics Failure. If TRUE the port will be restarted even if the Diagnostics indicate a Failure. If FALSE the port will be moved to DIAG_FAIL state
| ||||
| TextremeDiagPortConfigTable | 1.3.6.1.4.1.1916.1.24.2 | NA | ||
table · not-accessible · current Table, which contains the diagnostic configuration information for the ports | ||||
| RextremeDiagPortConfigEntry | 1.3.6.1.4.1.1916.1.24.2.1 | NA | ||
row · not-accessible · current Each row represents port related diagnostics configuration | ||||
| CextremeDiagPortCfgPortIfIndex | 1.3.6.1.4.1.1916.1.24.2.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current IfIndex of the Port for which the information in this row applies | ||||
| CextremeDiagPortCfgMode | 1.3.6.1.4.1.1916.1.24.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The mode of operation. The port can be configured to have either manual diagnostics or auto-diagnostics collected.
| ||||
| CextremeDiagPortCfgStatus | 1.3.6.1.4.1.1916.1.24.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Specifies whether Diagnostics are enabled or disabled for the port. In the manual mode, enable and disable will disable the corresponding bit in the manual Diag portmask. Once the run command is given the Manual Diagnostics starts running. <diagfail> indicates the diagnostics for the port has failed. <diagfail> is a read-only value and cannot be used for setting the status of the port
| ||||
| TextremeDiagPortDiagTable | 1.3.6.1.4.1.1916.1.24.3 | NA | ||
table · not-accessible · current Table contains the diagnostic information for the ports | ||||
| RextremeDiagPortDiagEntry | 1.3.6.1.4.1.1916.1.24.3.1 | NA | ||
row · not-accessible · current Each row represents port related diagnostics information | ||||
| CextremeDiagPortDiagPortIfIndex | 1.3.6.1.4.1.1916.1.24.3.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current IfIndex of the Port for which the information in this row applies | ||||
| CextremeDiagPortDiagMode | 1.3.6.1.4.1.1916.1.24.3.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The mode of operation. The port can be configured to have either manual diagnostics or auto-diagnostics collected.
| ||||
| CextremeDiagPortSpeed | 1.3.6.1.4.1.1916.1.24.3.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Specifies the speed of the port
| ||||
| CextremeDiagPortSwapAB | 1.3.6.1.4.1.1916.1.24.3.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Specifies whether pairA pairB cables are swapped
| ||||
| CextremeDiagPortSwapCD | 1.3.6.1.4.1.1916.1.24.3.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Specifies whether pairC and pairD cables are swapped
| ||||
| CextremeDiagPortPairAPol | 1.3.6.1.4.1.1916.1.24.3.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Specifies the polarity of pairA cables
| ||||
| CextremeDiagPortPairAFlen | 1.3.6.1.4.1.1916.1.24.3.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Specifies the distance of Fault in the pairA cables | ||||
| CextremeDiagPortPairALen | 1.3.6.1.4.1.1916.1.24.3.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current Specifies the length of the pairA cables | ||||
| CextremeDiagPortPairASkew | 1.3.6.1.4.1.1916.1.24.3.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current Skew of pairA cables with respect to the fastest pair | ||||
| CextremeDiagPortPairAStatus | 1.3.6.1.4.1.1916.1.24.3.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates whether pairA cables are properly terminated, short or open
| ||||
| CextremeDiagPortPairBPol | 1.3.6.1.4.1.1916.1.24.3.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current Specifies the polarity of pairB cables
| ||||
| CextremeDiagPortPairBFlen | 1.3.6.1.4.1.1916.1.24.3.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current Specifies the distance of Fault in the pairB cables | ||||
| CextremeDiagPortPairBLen | 1.3.6.1.4.1.1916.1.24.3.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current Specifies the length of the pairB cables | ||||
| CextremeDiagPortPairBSkew | 1.3.6.1.4.1.1916.1.24.3.1.14 | INTEGER | RO | |
column · INTEGER · read-only · current Skew of pairB cables with respect to the fastest pair | ||||
| CextremeDiagPortPairBStatus | 1.3.6.1.4.1.1916.1.24.3.1.15 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates whether pairB cables are properly terminated, short or open
| ||||
| CextremeDiagPortPairCPol | 1.3.6.1.4.1.1916.1.24.3.1.16 | INTEGER | RO | |
column · INTEGER · read-only · current Specifies the polarity of pairC cables
| ||||
| CextremeDiagPortPairCFlen | 1.3.6.1.4.1.1916.1.24.3.1.17 | INTEGER | RO | |
column · INTEGER · read-only · current Specifies the distance of Fault in the pairC cables | ||||
| CextremeDiagPortPairCLen | 1.3.6.1.4.1.1916.1.24.3.1.18 | INTEGER | RO | |
column · INTEGER · read-only · current Specifies the length of the pairC cables | ||||
| CextremeDiagPortPairCSkew | 1.3.6.1.4.1.1916.1.24.3.1.19 | INTEGER | RO | |
column · INTEGER · read-only · current Skew of pairC cables with respect to the fastest pair | ||||
| CextremeDiagPortPairCStatus | 1.3.6.1.4.1.1916.1.24.3.1.20 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates whether pairC cables are properly terminated, short or open
| ||||
| CextremeDiagPortPairDPol | 1.3.6.1.4.1.1916.1.24.3.1.21 | INTEGER | RO | |
column · INTEGER · read-only · current Specifies the polarity of pairD cables
| ||||
| CextremeDiagPortPairDFlen | 1.3.6.1.4.1.1916.1.24.3.1.22 | INTEGER | RO | |
column · INTEGER · read-only · current Specifies the distance of Fault in the pairD cables | ||||
| CextremeDiagPortPairDLen | 1.3.6.1.4.1.1916.1.24.3.1.23 | INTEGER | RO | |
column · INTEGER · read-only · current Specifies the length of the pairD cables | ||||
| CextremeDiagPortPairDSkew | 1.3.6.1.4.1.1916.1.24.3.1.24 | INTEGER | RO | |
column · INTEGER · read-only · current Skew of pairD cables with respect to the fastest pair | ||||
| CextremeDiagPortPairDStatus | 1.3.6.1.4.1.1916.1.24.3.1.25 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates whether pairD cables are properly terminated, short or open
| ||||
| CextremeDiagPortDateTime | 1.3.6.1.4.1.1916.1.24.3.1.26 | DisplayString (SIZE (64)) | RO | |
column · DisplayString (SIZE (64)) · read-only · current Date and time at which the Diagnostic information was collected | ||||
| TextremeDiagPortStatsTable | 1.3.6.1.4.1.1916.1.24.4 | NA | ||
table · not-accessible · current Table, which contains the diagnostic statistic information for the ports | ||||
| RextremeDiagPortStatsEntry | 1.3.6.1.4.1.1916.1.24.4.1 | NA | ||
row · not-accessible · current Each row represents port related diagnostics statistics information | ||||
| CextremeDiagPortStatsPortIfIndex | 1.3.6.1.4.1.1916.1.24.4.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current IfIndex of the Port for which the information in this row applies | ||||
| CextremeDiagPortStatsNumDiag | 1.3.6.1.4.1.1916.1.24.4.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Number of times Diagnostics information collected for this port | ||||
| CextremeDiagPortStatsNumSuccess | 1.3.6.1.4.1.1916.1.24.4.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Number of times Diagnostics for this port completed successfully without any errors | ||||
| CextremeDiagPortStatsNumFail | 1.3.6.1.4.1.1916.1.24.4.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Number of times Diagnostics for this port Failed due to errors in the cable pairs | ||||
| CextremeDiagPortStatsNumChange | 1.3.6.1.4.1.1916.1.24.4.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Number of times Diagnostics Changed for this port | ||||
| CextremeDiagPortStatsNumAbort | 1.3.6.1.4.1.1916.1.24.4.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Number of times Diagnostics was aborted by the user for this port | ||||
| NextremeCableTraps | 1.3.6.1.4.1.1916.1.24.5 | |||
| NextremeCableTrapsPrefix | 1.3.6.1.4.1.1916.1.24.5.0 | |||
| !extremeTrapDiagPortDiagnostics | 1.3.6.1.4.1.1916.1.24.5.0.1 | |||
notification · current Indicates the status of Diagnostics for a port. The status indicates whether Diagnostics for a particular port failed | ||||
Traps / Notifications
- extremeTrapDiagPortDiagnostics
1.3.6.1.4.1.1916.1.24.5.0.1