MIB Browser
Root OID
1.3.6.1.4.1.25651
Objects
1
Source
Show full MIB
snmptranslate -m ExaltComm -Tp
snmpwalk -v2c -c <community> -m ExaltComm <host> 1.3.6.1.4.1.25651

Imports

SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIBits, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso
SNMPv2-TCDisplayString, PhysAddress, TEXTUAL-CONVENTION

OID tree

NameOIDTypeAccessStatus
Nexaltcommunications1.3.6.1.4.1.25651

Textual conventions

AcmBaseModulationT INTEGER

m128QAM(3) m16QAM(1) m256QAM(4) m32QAM(5) m64QAM(2) m8PSK(6) mQPSK(0)

These are the supported ACM Base Modulation types.
AcmModulationT INTEGER

m128QAM(3) m128QAM2(13) m16QAM(1) m16QAM2(14) m256QAM(4) m32QAM(5) m32QAM2(11) m512QAM(6) m512QAM2(15) m64QAM(2) m64QAM2(12) m8PSK(7) m8PSK2(10) mBPSK2(8) mBPSK3(17) mQPSK(0) mQPSK2(9) mQPSK3(16) notAvailable(-9999)

These are the supported ACM Modulation types. When ACM is disabled or when telemetry is down, the modulation is -9999.
AcmPolicyT INTEGER

agressive(1) conservative(0)

This MIB variable selects ACM Policy.
              0 - sets Conservative policy,
1 - sets Agressive policy.
AcmPowerBoostEnableT INTEGER

disable(0) enable(1)

ACM Power Boost Enable / Disable parameter
AcmTargetModulationT INTEGER

m128QAM(3) m16QAM(1) m256QAM(4) m32QAM(5) m512QAM(6) m64QAM(2)

These are the supported ACM Target Modulation types.
AlarmLevelT INTEGER

almClearChanel(5) almDisable(3) almMAJOR(2) almMINOR(1) almNORMAL(0) almNonOccupant(6) almNotAvailable(4)

The Alarm Levels.
AntPortT INTEGER

portONE(1) portTWO(2)

This MIB variable selects antenna port for ODU.
1- portA for 5rc, port H for 5r , ANT1 for 5rc Denali
2- portB for 5rc, portV for 5r, ANT2 for 5rc Denali;
AuxNmsMode INTEGER

inBand(1) outBand(2)

The NMS mode (in-band or out-of-band)
BandSelectT INTEGER

ghz53(0) ghz54(1) ghz58(2)

The Band Selections
BandwidthT INTEGER

khz10000(10000) khz12500(12500) khz13750(13750) khz14000(14000) khz16000(16000) khz1750(1750) khz20000(20000) khz25000(25000) khz27500(27500) khz28000(28000) khz29650(29650) khz30000(30000) khz32000(32000) khz3500(3500) khz40000(40000) khz5000(5000) khz50000(50000) khz55000(55000) khz56000(56000) khz59300(59300) khz60000(60000) khz64000(64000) khz7000(7000) khz8000(8000) khz80000(80000)

The Radio Bandwidth.
BuzTimeoutT INTEGER

buzzerOFF(0) buzzerTenMinute(1) buzzerTwoHour(2)

This MIB variable selects ODU buzzer timeout period.
              1 - turns off buzzer,
2 - sets buzzer timeout period to 10 minutes,
3 - sets buzzer timeout period to 2 hours.
DS3LineCodeT INTEGER

ami(1) b8zs(0) notAvail(-1)

The DS3 Line Codes.
DS3LoopBackModeT INTEGER

lbDisabled(0) lbExtLocal(1) lbExtRemote(2) lbInternal(3)

These are the loopback modes of the DS3 interfaces.
DS3StatusT INTEGER

disabled(0) enabled(1)

The DS3 enabled status.
DfsAntGainT Integer32 (18..38)
This MIB variable sets DFS antenna gain (in dB); available antenna
gain ranges from 18 to 38 dB, with 1 dB step.
DfsEnableT INTEGER

disable(0) enable(1)

This MIB variable sets DFS enable/disable option; this is option is
availble for Radio A only.
DiplexerConfigG2T INTEGER

diplexer701(701) diplexer702(702) diplexer703(703) diplexer704(704) diplexer705(705) diplexer706(706) diplexer707(707) diplexer708(708) diplexer709(709) diplexer710(710) diplexer711(711) diplexer712(712) diplexer713(713) diplexer714(714) diplexer715(715) diplexer716(716) diplexer717(717) diplexer718(718) diplexer719(719) diplexer720(720) diplexer721(721) diplexer722(722) diplexer723(723) diplexer724(724) diplexer725(725) diplexer726(726) diplexer727(727) diplexer728(728) diplexer729(729) diplexer730(730) diplexer731(731) diplexer732(732) diplexer733(733) diplexer734(734) diplexer735(735) diplexer736(736) diplexer737(737) diplexer738(738) diplexer739(739) diplexer740(740) diplexer741(741) diplexer742(742) diplexer743(743) diplexer744(744) diplexer745(745) diplexer746(746) diplexer747(747) diplexer748(748) diplexer749(749) diplexer750(750) diplexer751(751) diplexer752(752) diplexer753(753) diplexer754(754) diplexer755(755) diplexer756(756) diplexer757(757) diplexer758(758) diplexer759(759) diplexer760(760) diplexer761(761) diplexer762(762) diplexer763(763) diplexer764(764) diplexer765(765) diplexer766(766) diplexer767(767) diplexer768(768) diplexer769(769) diplexer770(770) diplexer771(771) diplexer772(772) diplexer773(773) diplexer774(774) diplexer775(775) diplexer776(776) diplexer777(777) diplexer778(778) diplexer779(779) diplexer780(780) diplexer781(781) diplexer782(782) diplexer783(783) diplexer784(784) diplexer785(785) diplexer786(786) diplexer787(787) diplexer788(788) diplexer789(789) diplexer790(790) diplexer791(791) diplexer792(792) diplexer793(793) diplexer794(794) diplexer795(795) diplexer796(796) diplexer797(797) diplexer798(798) diplexer799(799) diplexer800(800) diplexer801(801) diplexer802(802) diplexer803(803) diplexer804(804) diplexer805(805) diplexer806(806) diplexer807(807) diplexer808(808) diplexer809(809) diplexer810(810) diplexer811(811) diplexer812(812) diplexer813(813) diplexer814(814) diplexer815(815) diplexer816(816) diplexer817(817) diplexer818(818) diplexer819(819) diplexer820(820) diplexer821(821) diplexer822(822) diplexer823(823) diplexer824(824) diplexer825(825) diplexer826(826) diplexer827(827) diplexer828(828) diplexer829(829) diplexer830(830) diplexer831(831) diplexer832(832) diplexer833(833) diplexer834(834) diplexer835(835) diplexer836(836) diplexer837(837) diplexer838(838) diplexer839(839) diplexer840(840) diplexer841(841) diplexer842(842) diplexer843(843) diplexer844(844) diplexer845(845) diplexer846(846) diplexer847(847) diplexer848(848) diplexer849(849) diplexer850(850) diplexer851(851) diplexer852(852) diplexer853(853) diplexer854(854) diplexer855(855) diplexer856(856) diplexer857(857) diplexer858(858) diplexer859(859) diplexer860(860) diplexer861(861) diplexer862(862) diplexer863(863) diplexer864(864) diplexer865(865) diplexer866(866) diplexer867(867) diplexer868(868) diplexer869(869) diplexer870(870) diplexer871(871) diplexer872(872) diplexer875(875) diplexer876(876) diplexer877(877) diplexer878(878) diplexer879(879) diplexer880(880) diplexer881(881) diplexer882(882) diplexer883(883) diplexer884(884) diplexer885(885) diplexer886(886) diplexer887(887) diplexer888(888) diplexer889(889) diplexer890(890) diplexer891(891) diplexer892(892) diplexer893(893) diplexer894(894) diplexer895(895) diplexer896(896) diplexer897(897) diplexer898(898) diplexer899(899) diplexer900(900) diplexer901(901) diplexer902(902) diplexer903(903) diplexer904(904) diplexer905(905) diplexer906(906) diplexer907(907) diplexer908(908) diplexer909(909) diplexer910(910) diplexer911(911) diplexer912(912) diplexer913(913) diplexer914(914) diplexer915(915) diplexer916(916) diplexer917(917) diplexer918(918) diplexer919(919) diplexer920(920) other(7) unconfigured(0)

These are diplexer configuration options for lower band radios, where
Unconfigured is not configurable.
DiplexerConfigT INTEGER

diplexer125(125) diplexer126(126) diplexer127(127) diplexer128(128) diplexer129(129) diplexer130(130) diplexer301(301) diplexer302(302) diplexer303(303) diplexer304(304) diplexer305(305) diplexer306(306) diplexer307(307) diplexer308(308) diplexer309(309) diplexer310(310) diplexer311(311) diplexer312(312) diplexer313(313) diplexer314(314) diplexer315(315) diplexer316(316) diplexer317(317) diplexer318(318) diplexer319(319) diplexer320(320) diplexer321(321) diplexer322(322) diplexer323(323) diplexer324(324) diplexer325(325) diplexer326(326) diplexer327(327) diplexer328(328) diplexer329(329) diplexer330(330) diplexer331(331) diplexer332(332) diplexer333(333) diplexer334(334) diplexer335(335) diplexer336(336) diplexer337(337) diplexer338(338) diplexer339(339) diplexer340(340) diplexer341(341) diplexer342(342) diplexer343(343) diplexer344(344) diplexer345(345) diplexer346(346) diplexer347(347) diplexer348(348) diplexer349(349) diplexer350(350) diplexer351(351) diplexer352(352) diplexer353(353) diplexer354(354) diplexer355(355) diplexer356(356) diplexer357(357) diplexer358(358) diplexer359(359) diplexer360(360) diplexer361(361) diplexer362(362) diplexer363(363) diplexer364(364) diplexer365(365) diplexer366(366) diplexer367(367) diplexer368(368) diplexer377(377) diplexer378(378) diplexer379(379) diplexer380(380) diplexer381(381) diplexer382(382) diplexer389(389) diplexer390(390) diplexer391(391) diplexer392(392) diplexer393(393) diplexer394(394) diplexer395(395) diplexer396(396) diplexer397(397) diplexer398(398) diplexer399(399) diplexer400(400) diplexer401(401) diplexer402(402) diplexer403(403) diplexer404(404) diplexer405(405) diplexer406(406) diplexer407(407) diplexer408(408) diplexer409(409) diplexer410(410) diplexer411(411) diplexer412(412) diplexer413(413) diplexer414(414) diplexer415(415) diplexer416(416) other(7) unconfigured(0)

These are diplexer configuration options for lower band radios, where
Unconfigured is not configurable.
DualRadioXpicEnableT INTEGER

disable(0) horizontal(2) vertical(1)

Disable XPIC or enable XPIC with vertical/horizontal polarity
EnableStatusT INTEGER

disable(0) enable(1)

Enable / Disable parameter
EthAuxStatusT INTEGER

disableAlarm(1) enableAlarm(0)

The Aux ethernet port Alarm enabled status
EthMainStatusT INTEGER

disableAlarm(2) enableNOmute(1) enableWithMute(0)

The Main ethernet port status.
EthPortMode INTEGER

auto(4) full10(1) full100(0) half10(3) half100(2)

The Ethernet port operation Modes
EthernetMgmtTypeT INTEGER

advanced(4) inBand(0) legacy(3) outOfBand(1) portToPort(2)

Defines Ethernet switch management options
ExaltEnableT INTEGER

disable(0) enable(1)

Enable / Disable parameter
ExtAlarmsT INTEGER

alarmOnCLOSE(1) alarmOnOPEN(2)

This is the condidtion that an alarm should be
raised.
FileTransferStartT INTEGER

noAction(0) startTransfer(1)

Supported file start/status types.
FileTransferTypeT INTEGER

downloadConfig(4) downloadEventLogs(6) downloadFirmware(3) downloadMIBs(5) uploadConfig(1) uploadFirmware(0) uploadRDD(2)

Supported file transfer types.
FlyWheelT INTEGER

fwInfinite(1) fwNormal(0)

This MIB variable selects ODU fly wheeling timeout period.
0 - fly wheel for 5 minutes, 1 - fly wheel forever.
FreqGroupT INTEGER

all(0) preferred(1)

The Frequency Group
GbeEthPortMode INTEGER

auto(7) full10(5) full100(3) full1000(1) half10(6) half100(4) half1000(2)

The Ethernet port operation Modes for GigE interfaces
Led4ColorT INTEGER

greenFastBlink(187) greenON(255) greenSlowBlink(119) ledOFF(0) redFastBlink(153) redON(221) redSlowBlink(85) yellowFastBlink(170) yellowON(238) yellowSlowBlink(102)

4 Color front pannel LED Bitmap.
LinkDistanceT INTEGER

under10(10) under2(2) under20(20) under5(5) under50(50)

The Distance between Radios in miles.
MefEnableT INTEGER

disabled(0) enabled(1)

Enable or disable MEF setting
MefIrgT INTEGER

r1000kbps(4) r128kbps(1) r256kbps(2) r512kbps(3) r64kbps(0)

MEF IRG
MefMacT INTEGER

discard(0) forward(1)

MEF MAC Block
MefMasterModeT INTEGER

auto(0) forceMaster(1) forceSlave(2) notPresent(3)

MEF Master Mode (Sync Ethernet)
MefRateLimitTypeT INTEGER

kbps(0) mbps(1)

The MEF ethernet rate limit type in KBPS (or) MBPS.
MefRateLimitValueT Integer32
The MEF ethernet rate limit, if the rate limit is enabled,
the value is applied on to the port.
eg., rate in KBPS (64..1792, stepsize 64)
     rate in MBPS (2..100, stepsize 1) and (104..1000, stepsize 8)
MhsLockOnT INTEGER

lockOnline(1) lockStandby(2) noLock(0)

Lock on configuration of the MHS.
MhsRoleT INTEGER

notDefined(0) primary(1) secondary(2)

The designated role of the MHS.
MhsTimeoutT INTEGER

infinite(0) tenMinutes(2) twentySeconds(1)

The lock on timeout of the MHS.
ModulationT INTEGER

m128QAM(3) m16QAM(1) m256QAM(4) m32QAM(5) m512QAM(6) m64QAM(2) mQPSK(0)

These are the supported Modulation types.
NtpClientEnableT INTEGER

disable(0) enableWith1Server(1) enableWith2Servers(2) enableWith3Servers(3) enableWith4Servers(4)

Enable or disable NTP client
PerformanceModeT INTEGER

balancedPerformance(2) maxSystemGain(1) maxThroughputMinLatency(0)

These are the supported performance mode when TCM modulation is used.
PolarizationT INTEGER

portH(2) portV(1) portVplusH(3)

This MIB variable selects ODU polarizations for GigE radios.
1 - selects portV for Veritical ,
                            2 - select portH for Horizontal ,
                            3- for Cross-Pole (V+H)
QosQueueSizeByteT Integer32 (1..2097152)
The Qos queue size in bytes
QosQueueSizePercentT Integer32 (1..100)
The Qos queue size in percentage
QosTagT INTEGER (0..7)
This MIB variable sets Qos 802.1p tag.
QosTtlT Integer32 (100..100000)
The Qos time to live in miliseconds in a queue
RadioCollocSyncSourceT INTEGER

syncGPS(1) syncINTERNAL(2) syncOFF(0)

This is the source to get SYNC timing. Choices
are Off, GPS, or Internal
RadioCollocSyncTypeT INTEGER

syncAuto(1) syncNone(4) syncSink(3) syncSrc(2)

This is the radio SYNC type. Choices
are SYNC_AUTO, SYNC_SRC, SYNC_SINK or SYNC_NONE
RadioFreq24T Integer32 (2406..2468)
This is the 2.4 ghz band freq ranges.
RadioFreq5gT Integer32 (5260..5332 | 5731..5844)
These are the 5.3 and 5.8 Freq ranges.
RadioSourceT INTEGER

radioA(1) radioB(2)

The Radio Source. Radio A or Radio B
RadioTxPwr11gT Integer32 (0..270)
The 11 GHz Band Power levels.
RadioTxPwr13gT Integer32 (0..270)
The 13 GHz Band Power levels.
RadioTxPwr15gT Integer32 (0..270)
The 15 GHz Band Power levels.
RadioTxPwr18gT Integer32 (0..270)
The 18 GHz Band Power levels.
RadioTxPwr23gT Integer32 (0..260)
The 23 GHz Band Power levels.
RadioTxPwr24T Integer32 (70..270)
The 2.4 GHz band Power levels.
RadioTxPwr24gT Integer32 (-250..50)
The 24 GHz Band Power levels.
RadioTxPwr28gT Integer32 (0..260)
The 28 GHz Band Power levels.
RadioTxPwr38gT Integer32 (0..240)
The 38 GHz Band Power levels.
RadioTxPwr42gT Integer32 (0..230)
The 42 GHz Band Power levels.
RadioTxPwr5gT Integer32 (-70..240)
The 5 GHz Band Power levels.
RadioTxPwr6gT Integer32 (0..320)
The 6 GHz Band Power levels.
RadioTxPwr7LgT Integer32 (0..320)
The 7.0L GHz Band Power levels.
RadioTxPwr7gT Integer32 (30..270)
The 7 GHz Band Power levels.
RadioTxPwr8gT Integer32 (30..270)
The 8 GHz Band Power levels.
RadioTxPwrHP11gT Integer32 (100..290)
The 11 GHz HP Band Power levels.
RslPortT INTEGER

portH(2) portV(1)

This MIB variable sets the RF channel for antenna alignment purpose.
SyslogEnableT INTEGER

disabled(0) enabled(1)

Enable or disable Syslog logging to remote.
SyslogFilterSelectT INTEGER

all(0) critical(5) major(3) majorCritical(4) minor(1) minorMajorCritical(2)

Select logging filter to control events to be sent to remote host
TcmModulationT INTEGER

m128QAMBase(11) m128QAMSysG(19) m128QAMThru(3) m16QAMBase(9) m16QAMSysG(17) m16QAMThru(1) m256QAMBase(12) m256QAMSysG(20) m256QAMThru(4) m32QAMBase(13) m32QAMSysG(21) m32QAMThru(5) m64QAMBase(10) m64QAMSysG(18) m64QAMThru(2) mQPSKBase(8) mQPSKSysG(16) mQPSKThru(0) notAvailable(-9999)

These are the supported TCM Modulation types. When ACM is enabled, the TCM modulation will be invalid.
TddFrameSizeT INTEGER

tdd05(5) tdd10(10) tdd20(20) tdd25(25) tdd40(40) tdd50(50)

The TDD Frame Size enum in tenths of milliseconds.
Te1LboT INTEGER

lbo0to133(0) lbo133to266(1) lbo266to399(2) lbo399to533(3) lbo533to655(4) notAvail(-1)

The Te1 LBO types.
Te1LineCodeT INTEGER

ami(1) b8zs(0) notAvail(-1)

The T1/E1 Line Codes.
Te1LoopBackModeT INTEGER

lbDisabled(0) lbExtLocal(1) lbExtRemote(2) lbInternal(3)

These are the loopback modes of the T1/E1 interfaces.
Te1StatusT INTEGER

disabled(0) enabled(1)

The T1/E1 enabled status.
TimeZoneT INTEGER

alaska(2) arizona(4) atlantic(9) baghdad(17) bangkok(22) belgrade(13) berlin(12) cairo(15) central(6) east-Indiana(8) eastern(7) hawaii(1) helsinki(16) kabul(20) karachi(21) london(11) moscow(18) mountain(5) pacific(3) paris(14) samoa(0) seoul(26) shanghai(23) sydney(27) taipei(24) tehran(19) tokyo(25) uTC(10) vladivostok(28)

Time Zone
TxDcycleT INTEGER

t20r80(1) t35r65(2) t50r50(3) t65r35(4) t80r20(5)

This sets Fixed Asymmetric Throughput in both tx and rx directions.
User Options are: tx(20%)/rx(80%), 35/65, 50/50, 65/35 and 80/20.
TxOffsetT Integer32 (0..5000)
This MIB variable sets TX offset(in uSecs) of our radios
to sync with other vendors' radios in a collocated configuration.
V35CTSHandshakeT INTEGER

handshakeAlwaysOn(0) handshakeFollowRTS(1)

The V35 CTS handshake.
V35ClockInversionT INTEGER

txInvertRxInvert(3) txInvertRxNormal(1) txNormalRxInvert(2) txNormalRxNormal(0)

The V35 clock inversion.
V35LoopBackModeT INTEGER

lbDisabled(0) lbExtLocal(1) lbExtRemote(2) lbInternal(3)

These are the loopback modes of the V35 interfaces.
V35RateT INTEGER

v35Rate1024K(7) v35Rate128K(2) v35Rate1544K(8) v35Rate2048K(9) v35Rate256K(3) v35Rate384K(4) v35Rate512K(5) v35Rate56K(0) v35Rate64K(1) v35Rate768K(6)

The V35 channel rate Depends upon the T1/E1 settings of V35 Interface
channel rate selction differs
To set V35_T1, T1 mode should be selected
To set V35_E1, E1 mode should be selected.
V35StatusT INTEGER

disabled(0) enabled(1)

The V35 enabled status.
V35TxClockT INTEGER

externalTxClock(1) internalGenerator(2) rxClock(0)

The V35 transmit clock .
VlanGroupT INTEGER

groupETH2(1) groupETH2andPoE1(3) groupNONE(0) groupPoE1(2)

These are the Valid options for vlan ethernet
interfaces.
VlanIdT Integer32 (1..4095)
The VLAN ID
VlanStatusT INTEGER

disabled(0) enableBlkUtag(1) enableMgmtOnly(4) enablePassUtag(2) enableTagUtag(3)

This is definition for Vlan status. (Enabled or
disabled)

Used by